bsi standards publication · 2019. 12. 20. · en 60721-3-5 - iec 61373 + corr. october 2010 2011...

BSI Standards Publication

BS EN 61881-3:2012

Railway applications — Rolling stock equipment — Capacitors for power electronicsPart 3: Electric double-layer capacitors

+A1:2013

This is a preview of "BS EN 61881-3:2012+A...". Click here to purchase the full version from the ANSI store.

https://webstore.ansi.org/Standards/BSI/BSEN618812012A12013?source=preview

BS EN 61881-3:2012+A1:2013

National foreword

This British Standard is the UK implementation of EN 61881-3:2012+A1:2013. It is identical to IEC 61881-3:2012, in-corporating amendment 1:2013. It supersedes BS EN 6188-3:2012, which is withdrawn.

The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !".

The UK participation in its preparation was entrusted by Technical Com-mittee GEL/9, Railway Electrotechnical Applications, to Subcommittee GEL/9/2, Railway Electrotechnical Applications - Rolling stock.

A list of organizations represented on this subcommittee can be obtained on request to its secretary.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

© The British Standards Institution 2014.Published by BSI Standards Limited 2014

ISBN 978 0 580 77285 6ICS 31.060.70; 45.060

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2012.

Amendments/corrigenda issued since publication

Date Text affected

28 February 2014 Implementation of IEC amendment 1:2013 with CENELEC endorsement A1:2013

BRITISH STANDARD



EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

CENELEC European Committee for Electrotechnical Standardization

Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61881-3:2012 E

ICS 45.060

English version

Railway applications - Rolling stock equipment -

Capacitors for power electronics - Part 3: Electric double-layer capacitors

(IEC 61881-3:2012) Applications ferroviaires - Matériel roulant - Condensateurs pour électronique de puissance - Partie 3: Condensateurs électriques à double couche (CEI 61881-3:2012)

Bahnanwendungen - Betriebsmittel auf Bahnfahrzeugen - Kondensatoren für Leistungselektronik - Teil 3: Doppelschichtkondensatoren (IEC 61881-3:2012)

This European Standard was approved by CENELEC on 2012-09-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

November 2013

EN 61881-3:2012+A1This is a preview of "BS EN 61881-3:2012+A...". Click here to purchase the full version from the ANSI store.


Foreword

The text of document 9/1680/FDIS, future edition 1 of IEC 61881-3, prepared by IEC/TC 9, "Electrical equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61881-3:2012.

The following dates are fixed:

• latest date by which the document has to be implemented at national level by publication of an identical na-tional standard or by endorsement

(dop) 2013-06-12

• latest date by which the national standards conflicting with the document have to be withdrawn

(dow) 2015-09-12

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 61881-3:2012 was approved by CENELEC as a European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60077-1:1999 NOTE Harmonized as EN 60077-1:2002 (modified).

IEC 60077-2:1999 IEC 60384-1:2008

IEC 60664-1:2007

IEC 61287-1:2005

IEC 61881-1:2010 IEC 61881-2

NOTE Harmonized as EN 60077-2:2002 (modified). NOTE Harmonized as EN 60384-1:2009 (not modified).

NOTE Harmonized as EN 60664-1:2007 (not modified).

NOTE Harmonized as EN 61287-1:2006 (not modified).

NOTE Harmonized as EN 61881-1:2011 (not modified). NOTE Harmonized as EN 61881-2.

The text of document 9/1819/FDIS, future IEC 61881-3:2012/A1, prepared by IEC/TC 9 "Electrical equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61881-3:2012/A1:2013. The following dates are fixed:

• latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement

(dop) 2014-07-21

• latest date by which the national standards conflicting with the document have to be withdrawn

(dow) 2016-10-21

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 61881-3:2012/A1:2013 was approved by CENELEC as a European Standard without any modification.

In the Bibliography of EN 61881-3:2012, the following note has to be added for the standard indicated: IEC 60529 NOTE Harmonized as EN 60529.

Foreword to amendment A1

BS EN 61881-3:2012+A1:2013 EN 61881-3:2012+A1:2013 (E) – 2 –



Annex ZA (normative)

Normative references to international publications with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year

IEC 60068-1 + corr. October + A1

1988 1988 1992

Environmental testing - Part 1: General and guidance

EN 60068-1 -1)

1994 -

IEC 60068-2-14 2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature

EN 60068-2-14 2009

IEC 60068-2-17 1994 Environmental testing - Part 2: Tests - Test Q: Sealing

EN 60068-2-17 1994

IEC 60068-2-20 - Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads

EN 60068-2-20 -

IEC 60068-2-21 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

EN 60068-2-21 -

IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

EN 60068-2-78 -

IEC 60571 +A1

1998 2006

Electronic equipment used on rail vehicles - -

IEC 60721-3-5 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations

EN 60721-3-5 -

IEC 61373 + corr. October

2010 2011

Railway applications - Rolling stock equipment - Shock and vibration tests

EN 61373 2010

IEC 62236-3-2 - Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

- -

IEC 62391-1 2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification

EN 62391-1 2006

IEC 62391-2 2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application

EN 62391-2 2006

IEC 62497-1 - Railway applications - Insulation coordination -Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment

- -

1) EN 60068-1 includes A1 to IEC 60068-1+ corr. October .

BS EN 61881-3:2012+A1:2013 EN 61881-3:2012+A1:2013 (E)– 3 –



Publication Year Title EN/HD YearIEC 62498-1 + corr. November

2010 2010

Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock

- -

IEC 62576 2009 Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics

EN 62576 2010

BS EN 61881-3:2012+A1:2013 EN 61881-3:2012+A1:2013 (E) – 4 –



CONTENTS

1 Scope ............................................................................................................................... 2 Normative references ....................................................................................................... 3 Terms and definitions ....................................................................................................... 4 Service conditions .......................................................................................................... 1

4.1 Normal service conditions ..................................................................................... 14.1.1 General ..................................................................................................... 14.1.2 Altitude ...................................................................................................... 1

1

4.1.3 Temperature .............................................................................................. 1

1

4.2 Unusual service conditions .................................................................................... 1

1

5 Quality requirements and tests ....................................................................................... 1

5.1 Test requirements ................................................................................................. 15.1.1 General ..................................................................................................... 15.1.2 Test conditions .......................................................................................... 1 5.1.3 Measurement conditions ............................................................................ 15.1.4 Voltage treatment ...................................................................................... 15.1.5 Thermal treatment ..................................................................................... 1

5.2 Classification of tests ............................................................................................ 15.2.1 General ..................................................................................................... 1 5.2.2 Type tests ................................................................................................. 15.2.3 Routine tests ............................................................................................. 15.2.4 Acceptance tests ....................................................................................... 1

5.3 Capacitance and internal resistance ...................................................................... 15.3.1 Measurement procedure for capacitance and internal resistance ............... 1 5.3.2 Calculation methods for capacitance and internal resistance ..................... 1

4

5.3.3 Acceptance criteria of capacitance and internal resistance ........................ 1

4

5.4 Leakage current and self-discharge ....................................................................... 1

5

5.4.1 Leakage current ........................................................................................ 1

5

5.4.2 Self-discharge ........................................................................................... 1

5.5 Insulation test between terminals and case ........................................................... 1 5.5.1 Capacitor cell (If applicable (applicable to metal case with terminals)

and if required) .......................................................................................... 1 5.5.2 Capacitor module or bank .......................................................................... 1

5.6 Sealing test ........................................................................................................... 15.7 1

5.7.1 General ..................................................................................................... 15.7.2 Preconditioning.......................................................................................... 15.7.3 Initial measurement ................................................................................... 15.7.4 Test method .............................................................................................. 15.7.5 Post treatment ........................................................................................... 15.7.6 Final measurement .................................................................................... 1 5.7.7 Acceptance criteria .................................................................................... 1

8

5.8 Environmental testing ............................................................................................ 1

8

5.8.1 Change of temperature .............................................................................. 1

8

5.8.2 Damp heat, steady state ............................................................................ 1

8

5.9 Mechanical tests ...................................................................................................

Short-circuit test"! ................................................................................................

– 5 –

8

89

2 2 2 2 2223 3 3 3 3

444

6666

678888

9999

20

BS EN 61881-3:2012+A1:2013 IEC 61881-3:2012+A1:2013



bsi standards publication · 2019. 12. 20. · en 60721-3-5 - iec 61373 + corr. october 2010 2011...

Documents