buckaroos tool catalogbungee cinch w/cord attached t-12frp cinch only • perfect as a metal...

Buckaroos, Inc. | www.buckaroos.com | 800-969-31132

Depth Gaugepg. 38

HardenedReplacement Door

pg. 34

Malco® Mini Offset Aviation Snips

pg. 28

NEW PRODUCTS

Plastic Glue Dispenserspg. 6

Pipe Calipers pg. 24

Mini Pan Brake pg. 20

Buckaroos®Tape Dispenser

pg. 22

Ladder Carrierpg. 22

Digaroopg. 24

Glovespg. 12


Dear Buckaroos Tool Customers,

Welcome to the 2018 Buckaroos Tool Catalog! Since our first catalog in 1995, we have strived to bring you the very best quality, selection, and most innovative tools for the mechanical insulation and HVAC trades. Those priorities combined with our passion for superior customer service has made us fortunate to be your #1 source of tools.

This catalog features over 25 new products. In fact, the following products are all Buckaroos innovations:

• Buckaroos Tool Display (pg. 3)• Red Aluminum Pipe Caliper (pg. 24)• White Plastic Pipe Caliper (pg. 24)

• Buckaroos Digaroo™ (pg. 24)• Buckaroos Cinch (pg. 8)• Dial-A-Miter (pg. 24)

Buckaroos is pleased to introduce with this catalog edition a new, colorful, “Buckaroos Tool Center” wall display as shown below. The 32” height by 16” width and two metal shelves provide the perfect amount of space to promote top selling tools with limited available space.

Additionally, our patented Roundup Plus™ Saddles and CoolDry™ Insulated Saddles for chilled water and cold piping systems have created unique value that can help our distributor network stand out from the competition.

We truly appreciate your continued support for Buckaroos Tools and hope this catalog contributes additional value to your business and dollars to your bottom line.

Sincerely,

Jeffrey A. RebholzPresident

WELCOME TO BUCKAROOS!

Tool center includes:T-13G Buckaroos® Aluminum Pipe CaliperT-1B Buckaroos® 1 pt. Metal Adhesive GunT-1C Black Brush Tip for Metal Adhesive GunT-1P Buckaroos® Gray 5 oz. PVC Glue GunT-36A1 Scalloped 6” Utility KnifeT-36B1 Scalloped 8” Utility KnifeT-36HB Dexter® #1376-HB 6” Flexible Ham Boning KnifeT-36LL SofGrip Scalloped 9” All-Purpose KnifeT-45B Channellock® 8” End Cut NippersT-4H Economy Pusher Bar TensionerT-56DG Buckaroos® Insulation Depth GaugeT-62C Accusharp® Knife SharpenerT-63K Clauss® 8” High Leverage Sure Set ShearsT-68AA Buckaroos® Red G-26 Outward Clinch TackerT-68V4 Buckaroos® STCR 2619-1/2” Staples-Pocket PacksT-6A White Chinese Bristle Wood Brush-1”T-6C White Chinese Bristle Wood Brush-2”T-76B General® 12” Flat Leg Wing DividerT-76E Malco® Model #24 Rad Divider

Tool Center components include: 36 x 16 White Pegboard, Standard Hooks - 14, Medium Hooks - 6, 1 x 1 “C” Bracket, 6” Deep Blue Shelf, 9” Deep Blue Shelf, Buckaroos Tool Center Banner.


TABLE OF CONTENTS

Adhesive Guns ................................................................................. 6Banding & Tensioning .................................................................... 7Brushes ............................................................................................ 8Books & Manuals ............................................................................ 12Brakes .............................................................................................. 20Bungee Cords & Strapping ............................................................ 8Calipers ............................................................................................ 24Caulk Guns ....................................................................................... 24Circumference/Diameter Tapes & Rules ...................................... 22Code Blue Pliers & Wrenches ........................................................ 20Crimpers ........................................................................................... 10Crimping & Beading Machines ...................................................... 10Dividers ............................................................................................ 38Duct Board Tools ............................................................................. 31End Cut Nippers .............................................................................. 20File Stones ....................................................................................... 24Flashlights ....................................................................................... 12Gloves ............................................................................................... 12Hammers .......................................................................................... 12-14Hog Ring Pliers ................................................................................ 34Knife & Scissor Sharpeners ............................................................ 26Knives ............................................................................................... 16-18Ladder Accessories .......................................................................... 22Notchers ........................................................................................... 20Rulers ............................................................................................... 22Safety Glasses .................................................................................. 12


Saws ................................................................................................. 14Scribes & Gauges ............................................................................ 36Scratch Awls ..................................................................................... 24Seamers ........................................................................................... 14Shears .............................................................................................. 26Snips ................................................................................................. 26-28Staples ............................................................................................. 32-34Tackers (Outward Clinch) ................................................................ 32Tackers (Stapling Pliers) ................................................................. 34Tape Measures ................................................................................. 22Tongs ................................................................................................ 14Tool Carriers .................................................................................... 8Trammel Points ............................................................................... 36Trowels ............................................................................................. 36

pg. 6

pg. 16

pg. 24pg. 32

pg. 10pg. 7

BESTSELLERSSHOP OUR

pg. 28


Adhesive guns

Buckaroos® Red 5 oz. PVC glue gunT-1LMfg. ID P203A

buckaroos® OVAL Clear Plastic Adhesive Dispenser8 oz. T-1TMfg. ID 0136-43

16 oz. T-1UMfg. ID 00560160-02

buckaroos® 1 PT. Adhesive Gun with 4” SpoutT-1BMfg. ID 30-955

buckaroos® PVC Glue DispenserT-1KMfg. ID P303A

buckaroos® Clear Plastic Adhesive Dispenser8 oz. T-1RMfg. ID 0077-06

12 oz. T-1SMfg. ID 0077-08

buckaroos® 6 oz. metal adhesive gun w/rigid spoutT-1GMfg. ID 50-509CC

T-1C

GrAy 5 oz. PVC Glue GunPart # T-1P Mfg. ID 600S

• Plastic container, gray color 5 oz. oiler with straight spout• Ideal for sealing PVC jacketing and use with PVC adhesives

Part # Product Name Product Description

T-1B Buckaroos® 1 pt. Adhesive Gun with 4” Spout

• Ideal for rubber insulation adhesives• Steel and brass internal components

T-1C Black Brush Tip (sold separately) • Made exclusively to fit on the T-1B Buckaroos Adhesive Guns

T-1G Buckaroos® 6 oz. Metal Adhesive Gun w/Rigid 6” Spout

• Drawn steel body with rugged epoxy finish resists rust• For use with PVC adhesives for sealing PVC jacketing

T-1K Buckaroos® PVC Glue Dispenser • Tough HDPE oil can, 350 cc (11.8 fl. oz.) capacity• All metal pump mechanism with 5” brass tipped metal spout/used to dispense adhesives

T-1L Buckaroos® Red, 5 oz. PVC Glue Gun

• Tough HDPE oil can, 5 oz. capacity• All metal pump mechanism with 5” brass tipped metal spout/used to dispense adhesives

T-1P Buckaroos® Gray 5 oz. PVC Glue Gun

• Plastic container, gray color 5 oz. oiler with straight spout• Ideal for sealing PVC jacketing and use with PVC adhesives

T-1R / T-1S Buckaroos® 8 oz & 12 oz.Clear Plastic Adhesive Dispensers • Clear plastic adhesive dispensers

T-1T / T-1U Buckaroos® 8 oz & 16 oz. OvalClear Plastic Adhesive Dispensers • Clear plastic oval adhesive dispensers


Markwell® economy windlass tensionerT-4JMfg. ID S-240

Bandit® Hand tensionerT-4PMfg. ID CO7569

Windlass pusher tensionerT-4AMfg. ID MIP-1900

Markwell® economy pusher bar tensionerT-4HMfg. ID S-210

coil dispenserT-4EMfg. ID 400


T-4A Windlass Pusher Tensioner• Replacement for the Gerrard #101 Ratchet Tensioner• Strap gauge range-.015 to .031 - Strap width range-1/4” to 3/4”• Recommended for tank application

T-4E Coil Dispenser• Portable dispenser for 3/8” to 3/4” wide ribbon type steel binder strapping coils• Bracket holds tensioning and cutting tools and includes compartment for seals• Handle is provided for easy portability - Weighs only 15 lbs.

T-4H Markwell® Economy Pusher Bar Tensioner

• Capable of banding 3/8” to 3/4” width, .020 strapping• Used for insulated piping up to a 36” diameter

T-4J Markwell® Economy Windlass Tensioner

• Capable of banding 3/8” to 1” width, .032 strapping• Used on larger tanks, vessels and piping

T-4P Band-It® Hand Tensioner• Bantam low torque tensioning tool• For band widths ranging from 3/16” to 3/4”• Made to work in Pistol Grip, Straight or Angle Positions

Pistol grip tensionerPart # T-4D Mfg. ID MIP-1800

• Replacement for the Gerrard #1902-D• Strap gauge range - .015 to .023• Strap width range - 3/8” to 3/4”

banding & tensioning


brushes, tool carriers, Bungee Cords & Cinch, Strapping

General® Cotter Pin PUllerT-19AMfg. ID 64

Workhorse® 35 PocketTool CarrierT-9DMfg. ID 235

workhorse® 75 pocketTool carrierT-9FMfg. ID 275

Workhorse® 55 pocketTool carrierT-9EMfg. ID 255

brushes• Ideal for adhesives on rubber and polyethylene insulations• Economically priced, with excellent quality - plain wooden handles

T-6A White Bristle Chip Brush 1” T-6B White Bristle Chip Brush 1 1/2” T-6C White Bristle Chip Brush 2” T-6D White Bristle Chip Brush 3”

T-6E White Bristle Chip Brush 4” T-6F White Tampico Paste Brush 6” T-6G Chip and Dope Brush 7”

Bungee Cords

Bungee cinch & Cords

Poly Web 1” Strapping

• Holds insulation in place prior to jacketing• Ideal for work with flanges

• Perfect as a metal jacketing tie down on both pipe and tank applications• Adjust length and tension of the bungee cord in a matter of seconds• The Buckaroos Bungee Cinch can be ordered individually or with precut bungee cord lengths• For use with 3/8” Bungee Cord only

• Red polypropylene strapping for use as a temporary tie down on tank and pipe metal and PVC jacketing

• Strapping and buckles can be purchased separately or in pre-cut lengths

T-12A Bungee Cord - 5/16” x 500’ Roll T-12C Bungee Cord - 1/2” x 100’ Roll T-12L Bungee Cord - 3/8” x 300’ Roll

T-12FRP Buckaroos® Bungee Cinch (Only) T-12FRP-4 Buckaroos® Bungee Cinch with 4’ Bungee Cord T-12FRP-6 Buckaroos® Bungee Cinch with 6’ Bungee Cord

T-12S-2 Poly Web Strapping with Buckles - 2’ Long T-12S-4 Poly Web Strapping with Buckles - 4’ Long T-12S-6 Poly Web Strapping with Buckles - 6’ Long

T-12FRP-8 Buckaroos® Bungee Cinch with 8’ Bungee Cord T-12FRP-10 Buckaroos® Bungee Cinch with 10’ Bungee Cord

T-12S-8 Poly Web Strapping with Buckles - 8’ Long T-12S-10 Poly Web Strapping with Buckles - 10’ LongT-12T Side Release Buckles for 1” Poly Web Strap


brushes, tool carriers, Bungee Cords & Cinch, Strapping

Product Name Part # Size Product Description

White Bristle Chip Brush

T-6A 1”

• Economically priced, popular for applying adhesive to rubber and polyethylene insulations

T-6B 1 1/2”

T-6C 2”

T-6D 3”

T-6E 4”

T-6F 6”

Chip and Dope Brush T-6G 7” • Economically priced-great for adhesives for rubber and polyethylene

insulations

Workhorse™Tool Carrier (Tools Sold Separately)

T-9D 35 Pocket • 8 interior and 27 exterior pockets

T-9E 55 Pocket • Features a large reinforced pocket w/flap for extra wrenches, keys, etc. Also includes a cordless drill pocket and hammer holder

T-9F 75 Pocket• Features a cordless drill pocket, tape clip and webbing chain for tape,

elastic loops that are perfect for screwdriver sets, and “V” pockets are designed to carry pliers

Bungee Cord

T-12A 5/16” x 500’ Roll

• Holds insulation in place prior to jacketing and works great with flanges installsT-12C 1/2” x 100’ Roll

T-12L 3/8” x 300’ Roll

Bungee Cinch w/Cord

Attached

T-12FRP Cinch Only

• Perfect as a metal jacketing tie down on both pipe and tank applications• Adjust length and tension of the bungee cord in a matter of seconds• The Buckaroos® Bungee Cinch can be ordered individually or with precut

bungee cord lengths• For use with 3/8” Bungee Cord only

T-12FRP-4 4’ Cord

T-12FRP-6 6’ Cord

T-12FRP-8 8’ Cord

T-12FRP-10 10’ Cord

PolywebStrapping with

Buckles

T-12S-2 2’

• Red polypropylene strapping for use as a temporary tie down on tank and pipe metal and PVC jacketing (strapping and buckles can be purchased separately or in pre-cut lengths)

T-12S-4 4’

T-12S-6 6’

T-12S-8 8’

T-12S-10 10’

T-12T Buckle Only

General® Cotter Pin

PullerT-19A • Four inch heat-treated high carbon steel shaft and point,

overall length 7 1/2”


crimping & Beading

Klenk® 5-Blade offset hand crimperT-18EMfg. ID MA71260

roper whitney® “pexto”crimping & beading machineT-20AMfg. ID 0581

direct drive beading extensionsT-20BMfg. ID 17/18

wiss® 5-blade hand crimperT-18BMfg. ID WC5S

Wiss® 3-Blade hand crimperT-18DMfg. ID WC3S

Malco® 5-Blade hand crimperT-18FMfg. ID C5R

Klenk® 5-Blade Hand crimperT-18CMfg. ID MA71250

combination crimper & beader machinePart # T-20H Mfg. ID T-20H

• Performs both beading and crimping operations sequentially with one setup - both 1/4 inch and 1/8 inch bead sizes are available

• The two sizes are field interchangeable with the purchase of additional tooling• Reference scales and markable surfaces for the bead edge guides - the crimp

depth adjustment assists the operator in repeating setups• Each unit is set up and marked at the factory for rolling an edge bead using

.016 thick aluminum• Machine specifications available upon request



T-18B Wiss® 5-Blade Crimper

• For crimping round metal pipe to create a male fitting end• Crimps heavier gauge pipe up to 22 gauge galvanized steel• Optimal handle span for maximum power and comfortable operating range• Non-slip cushion grips for superior comfort and control

T-18C Klenk® 5-Blade Crimper

• Ideal for round duct, sheet metal pipe & downspouts• Five blade crimper makes perfect and uniform crimps on sheet metal up to 20

gauge• Crimps up to 1 1/4” back from end for a good overlap connection

T-18D Wiss® 3-Blade Hand Crimper

• Crimps male fitting end to connect guttering, downspouts or metal pipe• Optimal handle span for maximum power and comfortable operating range • Non-slip cushion grips for superior comfort and control

T-18E Klenk® 5-Blade Offset Hand Crimper

• Ideal for reducing diameter of round duct, sheet metal pipe, and downspouts for insertion into other pipes

• Five blades make uniform crimps on sheet metal up to 20 gauge• Crimps up to 1 5/8” back from end for good overlap connection

T-18F Malco® 5-Blade Hand Crimper

• Quickly downsize ends of round duct and stove pipe• Creates a tight fitting, more self-supporting crimp connection• Compound leverage produces 7 to 1 mechanical advantage• Ergonomic Redline Handles won’t wear you down

T-20ARoper Whitney® “Pexto” Crimping and Beading

Machine

• Furnished with ogee bead rolls and crimping rolls for one pass combined crimping and beading operation

• Adjustable for deep or shallow beading and for fade away crimping• Maximum capacity crimping beading-24 gauge metal• Portable 32 lb machine comes complete with clamp-on base• Parts and accessories available through special order

T-20BDirect Drive Beading

Extensions (sold separately)

• Feeds metal through while beading• No more pulling metal through manually

T-20HGardner Bully®

Combination Crimper & Beader Machine

• Performs both beading and crimping operations sequentially with one setup - both 1/4 inch and 1/8 inch bead sizes are available

• The two sizes are field interchangeable with the purchase of additional tooling• Reference scales and markable surfaces for the bead edge guides - the crimp

depth adjustment assists the operator in repeating setups• Each unit is set up and marked at the factory for rolling an edge bead using

.016 thick aluminum• Machine specifications available upon request

crimping & Beading


Buckaroos® pocketreference guideT-25CMfg. ID T-25C

handbooks, safety glasses, gloves, Flashlights, hammers

Starlite Safety Glasseswith gray lensesT-27EMfg. ID 4483M

Industrial PIPE INSULATION & METAL LAYOUT HANDBOOK T-25AMfg. ID T-25A

Buckaroos®

goatskin glovesMedium: T-29A-1Mfg. ID 3611-MEDLarge: T-29A-2Mfg. ID 3611-LG

Dotted kevlar glovesLarge: T-29B-LMfg. ID K20DDX-Large: T-29B-XLMfg. ID K20DD

Spartacus cut resistant glovesLarge: T-29C-LMfg. ID SPARTACUSX-Large: T-29C-XLMfg. ID SPARTACUS

Insulator’s HandbookPart # T-24A Mfg. ID T-24A

Also known as the “Insulator’s Bible”, this handbook is the standard instructional aid for professional insulators across North America. Detailed layouts and best practices are provided by the late Daniel Middaugh, who spent many years on the Alaskan Pipeline.

taeki 5 sheet metalgloves Large: T-29D-LMfg. ID GBNC5X-Large: T-29D-X-LMfg. ID GBNC5

Klenk® Telescoping FlashlightT-129Mfg. ID DA76570

fiberglass handled 21 oz. tinners hammerT-30GMfg. ID 21THF

wood handled 21 oz. tinners hammerT-30FMfg. ID 21THW


handbooks, safety glasses, gloves, Flashlights, hammers


T-24A Buckaroos® Insulator’s Handbook

• Known in Alaska as the “Insulation Bible”• Written by insulators of the Alaskan pipeline• Easy step-by-step instructions make this the perfect manual for new or experienced

insulators

T-25A Industrial Pipe Insulation &Metal Layout Handbook

• Great learning guide for new insulators• Simplified instructions, drawings, charts, math facts and an in depth glossary• A great reference guide for all insulators

T-25C Buckaroos® Pocket Reference Guide

• This great little book is a concise all-purpose reference featuring hundreds of tables, maps, formulas, constants & conversions

T-27E Starlite Safety Glasses with Gray Lenses

• Snug and comfortable fit helps minimize slippage and provide full brow protection.• Scratch Resistant, hardcoated 100% polycarbonate lens

T-29A-1T-29A-2

Buckaroos® Goatskin Gloves - Medium/Large

• The Gloves used by the pros• High quality and long lasting• Great for working with insulation

T-29B-LT-29B-XL

Dotted Kevlar Gloves - Large/X-Large

• Dupont Kevlar is a lightweight synthetic material and is five times stronger than steel• Provides outstanding cut, slash and heat resistance• Great for automotive, glass handling, sheet metal work and many cutting application

T-29C-LT-29C-XL

Spartacus Cut Resistant Gloves - Large/X-Large

• Comfortable to with breathable coating• Gray PU coated palm with gray and black 13 gauge HPPE liner• Superior resistance to abrasions and tears• ANSI cut level 2

T-29D-LT-29D-XL

Taeki 5 Sheet Metal Gloves - Large/X-Large

• Taeki 5 is a revolutionary cut resistant engineered yarn, that offers the highest standard EN Cut Level 5

• Offers superior dexterity and tactile sensitivity• Perfect for automotive, glass handling, sheet metal work & cutting applications

T-129 Klenk® Telescoping Flashlight

• Extends out to 20” (7 1/2” when collapsed)• Super bright 5 LED flashlight with magnetic tip that has up to a 2 lb. pick up power• Uses 3 LR44 batteries (included)

T-30F Wood Handled 21 oz. Tinners Hammer

• The 21 oz. sheet metal hammer has long been the standard in the fabrication trades• Made in the United States

T-30G Fiberglass Handled 21 oz.Tinners Hammer

• The 21 oz. sheet metal hammer has long been the standard in the fabrication trades• Made in the United States


wiss® hand seamerT-32EMfg. ID WS3

midwest snips® 6” wide hand seamerT-32JMfg. ID MWT-S6

Klenk® 16 oz. fiberglass tinners hammerT-30HMfg. ID DA70500

wiss® offset hand seamerT-32FMfg. ID WS4

Malco® 18 oz. setting hammerT-30KMfg. ID SH3

Klenk® 9 1/2” offset tongsT-32HMfg. ID MT14030

Malco® 3” hand seamerT-32KMfg. ID S2

Klenk® 20 oz. square head tinners hammerT-30JMfg. ID DA70510

Klenk® straight 9 1/2” fairmont tongsT-32GMfg. ID MT14020

hammers, hand seamers, tongs, Saws

stanley® wallboard sawT-58BMfg. ID 15-206

nicholson® #420 tuttle tooth pruning sawT-58LMfg. ID 80309

Marshalltown® rockwarrior utility sawT-58KMfg. ID RW426

stanley® “Shortcut” Tool box sawT-58EMfg. ID 15-334

Stanley® Contractor gradecushion grip wallboard sawT-58BBMfg. ID 15-556



T-30H Klenk® 16 oz. Fiberglass Tinners Hammer

• Features a balanced head for user comfort and a true swing• Strong fiberglass handle

T-30J Klenk® 20 oz. Square Head Tinners Hammer

• Features a balanced head for user comfort and a true swing• Full polished finish and a rubber-grip handle for less fatigue

T-30K Malco® 18 oz. Setting Hammer

• One piece forged, I-beam construction• Leather gripped grip is protected with a durable lacquer coating• Leather grip conforms to hand over time and use

T-32E Wiss® Hand Seamer

• Used to bend and flatten sheet metal• Optimal handle span for maximum power and comfortable operating range• Non-slip cushion grips for superior comfort and control• 3-1/4” jaw width, 1-1/4” maximum seam depth, 1/4” depth markings

T-32F Wiss® Offset Hand Seamer

• Used to bend and flatten sheet metal • Ideal for working in confined areas • Optimal handle span for maximum power and comfortable operating range • Non-slip cushion grips for superior comfort and control • 3-1/4” jaw width, 1-1/4” maximum seam depth, 1/4” depth markings

T-32G Klenk® Straight 9 1/2” Fairmont Tongs

• Used in HVACR, metal roofing, and other sheet metal applications• Forged and plated tongs have bending depth marks on jaws• Regular or offset handle models• Available with cushion grip handles, providing a softer, more comfortable grip• Made in USA

T-32H Klenk® 9 1/2” Offset Tongs

• Used in HVACR, metal roofing, and other sheet metal applications• Forged and plated tongs have bending depth marks on jaws• Regular or offset handle models• Available with cushion grip handles, providing a softer, more comfortable grip• Made in USA

T-32J Midwest Snips® 6” Wide Hand Seamer

• Seamer blades 6” long by 1-/4” wide with a 1-7/16” throat depth• Blades are forged• Kush’n power grips comfort users hands and reduces fatigue• Made in the USA

T-32K Malco® 3” Hand Seamer

• Bend, fold, flatten, straighten sheet metal on the job• Depth markings graduated in 1/4 inch (6.35 mm) increments to a full 1-1/4 inch (31.75 mm)

jaw depth• 24 gauge (0.71 mm) capacity in galvanized steel• Compound leverage produces 7 to 1 mechanical advantage• Ergonomic Redline Handles won’t wear you down

T-58B Stanley® Wallboard Saw• Lightweight all purpose saw• Non-clogging teeth• Pointed blade for starting holes

T-58BBStanley® Contractor Grade

Cushion Grip Wallboard Saw

• Fully hardened, tempered blade is designed to be strong and durable• Teeth are designed to cut fast and won’t clog• Sharp tip for plunge cuts

T-58E Stanley® “Shortcut” Tool Box Saw

• Features a new revolutionary tooth configuration that delivers clean cuts much faster than conventional handsaws

• Compact blade for easier storage and handling• Comfortable hardwood handle with special square/miter feature built in

T-58K Marshalltown® RockWarrior Utility Saw

• Tempered high carbon steel blade with beveled point• Blade cuts in both directions• Intended for drywall but will cut most any non-metallic material

T-58L Nicholson® #420 Tuttle Tooth Pruning Saw

• Blade length 24” - Teeth designed for fast cutting• Great all-purpose saw

hammers, hand seamers, tongs, Saws


Serrated KNIVES

Serrated KnivesPart # Product

DescriptionRecommended

UseBlade

Length Handle Type Handle Color Blade Type Recommended

Knife Sheath

T-36A1 Scalloped 6” Utility KnifeFiberglassRigid Foam

6” Polypropylene Black Serrated - Scalloped T-35A

T-36B1 Scalloped 8” Utility KnifeFiberglassRigid Foam

8” Polypropylene Black Serrated - Scalloped

T-35BT-35D

T-36LLSofGrip Scalloped 9”

All-Purpose KnifeFiberglassRigid Foam

9” Rubber White Serrated - Scalloped T-35D

T-36OXO OXO® Serrated 6”All-Purpose Knife

FiberglassElastomericRigid Foam

6” Rubber Black Serrated T-35A

T-36SC-6Russell International®

Scalloped Blade 6” Utility Knife


6” Polypropylene White Serrated - Scalloped T-35A

T-36SGL Scalloped 5 1/2” Utility Slicer


5 1/2” Rubber White Serrated - Scalloped T-35A

T-36VL4 V-Lo 9” Scalloped Utility Knife

FiberglassElastomeric

9” Rubber - Textured Gray/Black Serrated -

Scalloped T-35D

T-36VL5 V-Lo 6” Scalloped Utility Knife


6” Rubber - Textured Gray/Black Serrated -

Scalloped T-35A

T-36VV SofGrip 8” Tiger Edge Utility Knife


8” Rubber White Serrated - Tiger Edge

T-35BT-35D

T-36WW SofGrip 6” Scalloped Utility Knife


6” Rubber White Serrated - Scalloped T-35A

T-36A1Mfg. ID 31627B

T-36LLMfg. ID 24263

T-36B1Mfg. ID 31628B

T-36VL4Mfg. ID 29363


T-36SGLMfg. ID 24303

T-36SC-6Mfg. ID 31627

T-36OXOMfg. ID 89151V1

T-36VVMfg. ID 24293

T-36WWMfg. ID 24213


T-36CMfg. ID 20181

T-35AMfg. ID KT35A

T-35BMfg. ID KT35B

T-35DMfg. ID 20450

T-36DKMfg. ID DA71000

T-36DK-6Mfg. ID DK6S

T-36DK2Mfg. ID DA71010

double-sided Knives

Double-Sided & Miscellaneous KNIVES

Part # ProductDescription

Recommended Use

Blade Length Handle Type Handle

Color Blade Type Recommended Knife Sheath

T-36DK Klenk® Double Sided Duct Knife with Sheath Duct Board 6” Rosewood Brown

Double Sided - Smooth/Serrated

Included

T-36DK-2 Klenk® Ergo Handled Double Sided Knife Duct Board 6” Rubber Black


Included

T-36DK-6 Malco® Double Edge Smooth Blade Duct Knife Duct Board 6” Rubber Black


Included


Recommended Use



T-36C Easy Grip Hole Cutter Fiberglass n/a Rubber Black n/a n/a

T-36JK Klenk® Utility Jack Knife Utility Knife used in multiple cutting applications

T-36UK Wiss® Utility Knife Utility Knife used in multiple cutting applications


T-35A Buckaroos® 6” Knife Sheath • Durable leather knife protector

T-35B Buckaroos® 8” Knife Sheath

• Durable leather knife protector• T-35B is perfect for the T-36B1 8” Scalloped Utility Knife

T-35D Dexter® 9” Knife Scabbard

• Protects both the user and the ultimate edge of Dexter knives• Stitched and riveted leather body with convenient belt loops• Fits up to a 9” blade

miscellaneous Knives & Sheaths

T-36UKMfg. ID WK8V

T-36JKMfg. ID DA84140


non-Serrated KNIVES

T-36MMMfg. ID 31615




T-36PPMfg. ID 31614

T-36RRMfg. ID 31620

T-36SSMfg. ID 3323

T-36TTMfg. ID 3223

T-36SGMfg. ID 24033

T-36UUMfg. ID 3233

T-36MKMfg. ID MK4600

T-36HBMfg. ID 02010

T-36FFMfg. ID 80520

T-36EEMfg. ID 60130

T-36AAMfg. ID 2130

T-36DDMfg. ID 75571

6” Flexible ham boning knifePart # T-36HB Mfg. ID 02010

• For cutting fiberglass• Flexible high-carbon steel 6”

blade boning knife with beech wood handle

T-36HBRMfg. ID 2060

T-36SMfg. ID 1880

T-36QRMfg. ID 10351

T-36QMfg. ID X2T

T-36R / T-36R8Mfg. ID 60170


Non-Serrated Knives

non-serrated KNIVES


Recommended Use



T-36Q Dexter® 4” Tapered Point Shoe Knife

ElastomericRigid Foam

4” Hardwood Brown Smooth - Tapered T-35A

T-36R Dexter® 10” Rubber Knife Elastomeric 10” Hardwood Brown Smooth -

Curved n/a

T-36R8 Dexter® 8” Rubber Knife Elastomeric 8” Hardwood Brown Smooth - Curved n/a

T-36S Dexter® #1376 Boning Knife


6” Hardwood Brown Smooth - Boning T-35A

T-36AA Dexter® #1377 Wide Blade Boning Knife

FiberglassRigid Foam

7” Hardwood Brown Smooth -Wide Boning

T-35BT-35D

T-36DD Dexter® #421 Shoe Knife Elastomeric 4” Hardwood Brown Smooth -Tapered T-35A

T-36EE Dexter® 6” Rubber Knife Elastomeric 6” Hardwood Brown Smooth -Squared T-35A

T-36FF Dexter® Mica KnifeElastomericRigid Foam

6” Hardwood Black Smooth -Pointed T-35A

T-36HBDexter® #1376-HB

Flexible Ham Boning Knife


6” Hardwood BrownSmooth

- Flexible Boning

T-35A

T-36HBR Dexter® #1376-HBR Ham Boning Knife


6” Rosewood BrownSmooth

- Flexible Boning

T-35A

T-36MK Buckaroos® Mini Insulation Knife

ElastomericRigid FoamDuct Board

3 5/8” Plastic Black Smooth - 3-Sided Blade T-35A

T-36MM Dexter® 6” Wide Blade Boning Knife


6” Polypropylene White Smooth - Boning T-35A

T-36PP Dexter® Narrow Flex Blade 6” Boning Knife


6” Polypropylene White Smooth - Narrow Boning T-35A

T-36QR Dexter® Fillet KnifeElastomericFiberglass

8” Hardwood Brown SmoothT-35BT-35D

T-36RR Dexter® Curved Blade Boning Knife


6” Polypropylene White Smooth - Curved Boning T-35A

T-36SG Dexter® SofGrip White Handled 6” Boning Knife


6” Rubber White Smooth - Flexible T-35A

T-36SS Yellow Handle Limelight-Poultry Knife

ElastomericFiberglass

3 3/4” Polypropylene Yellow Smooth T-35A

T-36TTYellow Handle Limelight -

Flexible Curved Boning Knife


6” Polypropylene Yellow Smooth - Curved Boning T-35A

T-36UUYellow Handle Limelight -

Curved Blade Boning Knife


6” Polypropylene YellowSmooth -

Narrow Curved Boning

T-35A

T-36VL1 V-Lo 6” Flexible Boning Knife


6” Rubber -Textured Gray/Black Smooth - Flexible T-35A

T-36VL2 V-Lo 6” Narrow Blade Boning Knife


6” Rubber -Textured Gray/Black Smooth - Flexible T-35A

T-36VL3 V-Lo 8” Fillet KnifeElastomericFiberglass

8” Rubber -Textured Gray/Black SmoothT-35BT-35D


crescent® 10” tongue & groove pliersT-53KMfg. ID R210CV

crescent® 7” tongue & groove pliersT-53JMfg. ID R27CV

Channellock® code blue 8” extra wide adjustable wrenchT-53CB-5Mfg. ID 6WCB

Channellock® code blue 9 1/2” crimping plier w/cutterT-53CB-4Mfg. ID 909CB

Channellock® code blue 9 1/2” Tongue & groove pliersT-53CB-3Mfg. ID 420CB

Channellock® code blue8” diagonal cutting pliersT-53CB-2Mfg. ID 338CB

Channellock® code blue8 1/2” long nose pliers T-53CB-1Mfg. ID 318CB

Malco® hand notcherT-46FMfg. ID N1

wiss® hand notcherT-46EMfg. ID WHN1

channellock® code blue8” end cut nippersT-45FMfg. ID 358CB

crescent® 8 1/4” end cut nippersT-45EMfg. ID 728CVN

channellock®

8” End Cut NippersT-45BMfg. ID 358

channellock®

7” End Cut NippersT-45AMfg. ID 357

Mini brake, Miter Tubes, Nippers, NOTCHERS, wrenches, pliers

Metal jacket cutter T-40AMfg. ID T-40A

Malco® mini Pan braKe T-41QMfg. ID MB48B

Malco® mini braKe T-41HMfg. ID MB48A

Malco® mini brake legsT-41JMfg. ID MBL


Mini brake, Miter Tubes, Nippers, NOTCHERS, wrenches, pliers


T-40A Metal Jacket Cutter• Light weight and easy to use on the jobsite• Save time and money on the job• Super sharp blade is capable of cutting up to .016 metal jacketing

T-41H Malco® Mini Brake

• Accommodates sheet metal up to 48” wide in any length• Mini Brake produces bends up to 135º in sheet metals, including aluminum, copper, and

22-gauge galvanized steel• Compact size and lightweight (58 lbs.), makes the Mini Brake for use on any jobsite

T-41J Malco® Mini Brake Legs • Optional - legs sold separately

T-41Q Malco® Mini Pan Brake

• On-the-job pans, angled corners, or large components• Fast, easy assembly• One-person Portability• Works on bench, tailgate or leg kit• 135° bends in 22-gauge (0.86 mm) galvanized

T-45A Channellock® 7” End Cut Nippers

• Lightweight versus other nippers• Perfectly mated end cutter, heat treated to holds its edge• Polished high carbon drop forged steel

T-45B Channellock® 8” End Cut Nippers

• Lightweight versus other nippers• Perfectly mated end cutter, heat treated to holds its edge• Polished high carbon drop forged steel

T-45E Crescent® 8 1/4” End Cut Nippers

• Precision manufactured forged from alloy tool steel• Handles with carefully designed leverage ratio to blades for easier cutting• Electronically induction hardened, carefully designed, angled cutting edges and blade sizes

T-45F Channellock® Code Blue 8” End Cut Nippers

• New Code Blue™ designation on handles makes it easier than ever to choose the right tool for the job

• Precision made of fine polished, high carbon drop forged steel• Laser-hardened cutting edges provide longer life and greater ease of cut

T-46E Wiss® Hand Notcher• Cuts 30 degree V shaped cut in sheet metal• Gives clean notch without slipping at corners and take-off tabs• Non-slip cushion grips for superior comfort and control

T-46F Malco® Hand Notcher

• For corner notches and take-off tabs• Make 13/16 inch (20.64 mm) deep, 30° “V” shaped cuts in 24-gauge (20.66 mm) • Galvanized steel• Compound leverage produces 7 to 1 mechanical advantage• Ergonomic Redline Handles won’t wear you down

T-53CB-1 Channellock® Code Blue 8 1/2” Long Nose Pliers

• Cross-hatching on jaws grabs work tightly• Precision made of fine polished, high carbon drop forged steel• Laser-hardened cutting edges provide longer life and greater ease of cut

T-53CB-2 Channellock® Code Blue 8” Diagonal Cutting Pliers

• High leverage, heavy duty construction• Laser-hardened cutting edges provide for longer life and great ease of cut• Precision made of fine polished, high carbon drop forged steel

T-53CB-3Channellock® Code Blue 9 1/2” Tongue & Groove

Pliers

• Right angle teeth grip in all directions for maximum bite and minimum wear• Patented undercut tongue & groove design assures no slip jaw action• Patented reinforcing edge minimizes stress breakage

T-53CB-4Channellock® Code Blue

9 1/2” Crimping Plier with Cutter

• Precision crimping dies and cutters• Slim nose shape for tight places• Perfectly mated cutters, scientifically heat treated to hold their edge

T-53CB-5Channellock® Code Blue 8” Extra Wide Adjustable

Wrench

• Greater jaw capacity supports larger nuts and bolts• Longer jaws grip better avoiding slippage or nut round off• Measurement scales are handy for sizing nuts, pipe and tube diameters

T-53J Crescent® 7” Tongue & Groove Pliers

• Designed to grip all shapes like rods, pipes and cable connections• Straight jaw and self-locking jaw adjustment• Red non-slip cushion grip handle

T-53K Crescent® 10” Tongue & Groove Pliers

• Designed to grip all shapes like rods, pipes and cable connections• Straight jaw and self-locking jaw adjustment• Red non-slip cushion grip handle


stanley® leverlock1” x 25’ TapeT-56YMfg. ID 30-825

lufkin® circumference & Diametertape measure T-56WMfg. ID W606P

Lufkin® 2’ blacksmith’s Folding ruleT-56AAMfg. ID 86

Lufkin® 1/2” x 12’ series 1000 power tapeT-56HV-1Mfg. ID PHV1012

Lufkin® 4’ steel circumference ruleT-56HMfg. ID 954FT

Lufkin® 3/4” x 12’series 1000 power tapeT-56HV-2Mfg. ID PHV1312

Lufkin® 3’ steel circumference ruleT-56GMfg. ID 953FT

lufkin® 1” x 25’ series 1000 power tape T-56HV-4Mfg. ID PHV1425

stanley® diameter & Circumference Tape RuleT-56FMfg. ID 33-115

Boxtown team® ladder carrierT-37AMfg. ID Series 1

TApe Dispenser, circumference tapes & Rules, tape measures

Tape DispenserPart # T-43BMfg. ID T-43B

• Can be used under or over the ladder rung and stays secure when moving positions• Ideal for 2 Mil Foil, FSK, and ASJ insulation tapes• Available for 3”,4”, and 5” wide insulation tapes• Fast and easy to do a new roll change-out with wing nuts• Lightweight at 1.5 pounds each• Fabricated from durable 14 gauge steel



T-37A Boxtown Team® Ladder Carrier

• Attaches to 4-8 ft. A-frame fiberglass ladders for a safer and more comfortable transport around the jobsite. It also fits some 10-12 ft. ladders, aluminum and older fiberglass extension ladders

• Weight Load: 75 lbs.

T-43B Buckaroos® Tape Dispenser

• Can be used under or over the ladder rung and stays secure when moving positions• Ideal for 2 Mil Foil, FSK, and ASJ insulation tapes• Available for 3”,4”, and 5” wide insulation tapes• Fast and easy to do a new roll change-out with wing nuts• Lightweight at 1.5 pounds each• Fabricated from durable 14 gauge steel• Available in 5-Packs for Distributors

T-56AA Lufkin® 2’ Blacksmith’s Folding Rule

• Riveted joint has large side washer and stop which brings rule to a firm stop when opened straight

• For converting diameters directly to circumference measurements• Lower edge on one side is graduated to 1/16th of an inch, the upper edge on the other

side has a 1/8th inch scale

T-56F Stanley® Diameter & Circumference Tape Rule

• Scale on the back of the blade will measure up to 3’ in diameter• Spring is heat treated for added durability and protected blade will withstand abrasion• Tape measure blade is 1/4” x 10’

T-56G Lufkin® 3’ Steel Circumference Rule

• The “standard” rule for tinners and other sheet metal workers• Made of tempered medium weight steel• Reverse side has formulas for calculating circumference, diameter and area

T-56H Lufkin® 4’ Steel Circumference Rule

• The “standard” rule for tinners and other sheet metal workers• Made of tempered medium weight steel• Reverse side has formulas for calculating circumference, diameter, and area

T-56HV-1 Lufkin® 1/2” x 12’ Series 1000 Power Tape

• Hi-Viz orange case makes tape easy to find on the job• Lightweight, high strength case is designed to fit perfectly in the hand• Toggle lock is positioned for convenient operation

T-56HV-2 Lufkin® 3/4” x 12’ Series 1000 Power Tape


T-56HV-4 Lufkin® 1” x 25’ Series 1000 Power Tape


T-56W Lufkin® Circumference & Diameter Tape Measure

• Designed for measuring diameters of pipes, cables, tires or any circular objects• Conversion from diameter to circumference is made by simply turning the blade• Tape measure is 1/4” x 6’ with a polished chrome case

T-56Y Stanley® Leverlock 1” x 25’ Tape

• Power return tape rule with automatic bottom lock for easy operation• Special Tru-Zero hook allows use of nail as pivot to draw circles and arcs

TApe Dispenser, circumference tapes & Rules, tape measures


tapered file stone T-62AMfg. ID JD2

Buckaroos® 10.3 oz. Caulk GunT-14AMfg. ID 77

Malco® large grip 3 1/2” scratch awlT-60FMfg. ID A1

Buckaroos®

Aluminum Pipe CaliperT-13GMfg. ID T-13G

crescent® 3 7/8” scratch awlT-60DMfg. ID 73

Pipe CaliperT-13AMfg. ID T-13A

Digaroo™ Fabrication ToolT-59BMfg. ID T-59B

PVC Pipe CaliperT-13HMfg. ID T-13H

Tee masterT-56TMMfg. ID T-56TM

Layout gore ruleT-56GRMfg. ID T-56GR

stanley® leverlock1” x 30’ TapeT-56ZMfg. ID 30-830

Buckaroos® dial-A-MiterT-56DMMfg. ID T-56DM

tape measures, Layout Gore Rule, Tee Master, scratch awls, File Stone

Buckaroos® 10.3 oz. Skeleton Caulk GunT-14CMfg. ID 111



T-13A Pipe Caliper• For measuring iron pipe and copper tubing• For pipe sizes from 1/4” to 12”• Sturdy construction-nickel plated steel, corrosion resistant

T-13G Buckaroos® Aluminum Pipe Caliper

• Easily identify pipe size in IPS, CTS, and CPVC measurements up to a 16” Iron Pipe Size O.D.• Includes a handy IPS to CTS conversion chart and extends to a 14” ruler• Rugged and long lasting

T-13H Buckaroos® PVC Pipe Caliper

• Easily identify pipe size in IPS, CTS, and CPVC measurements up to a 16” Iron Pipe Size O.D.• Includes a handy IPS to CTS conversion chart and extends to a 14” ruler• Lightweight and flexible

T-14A Buckaroos® 10.3 oz. Caulk Gun • Economy ratchet rod caulk gun used for light consistency caulks and sealants

T-14C Buckaroos® 10.3 oz. Skeleton Caulk Gun • Smooth rod parallel framed caulk gun with tip cutter, seal punch, and ladder hook

T-56DM Buckaroos® Dial-A-Miter

• Easily helps you make both Short and Long Radius Elbows• Dial in the pipe size and you see the throat and heel measurements, angle of cut, and

number of miters required for each• From 1” iron pipe size to 30” iron pipe sizes• 19 iron pipe sizes on each side• Pocket size (3 1⁄2” diameter) and easy to carry• Made of a durable high gloss plastic film lamination• Used by trainers, insulators, and educators• Easy to read numbers and letters

T-56GR Layout Gore Rule

• This layout tool makes it easy to remember how to layout a 16 point gore• Step by step instructions included with each rule• This 6” x 6” square also has a protractor for laying out tee patterns• Made of 16 gauge steel, laser etched with a rust resistant black oxide finish

T-56TM Tee Master Layout Rule

• Lay out regular equal tee templates for 1” to 12” pipe in seconds• Made of durable ABS thermal plastic. Will not rust or corrode• Only 7” x 11” and 1/16” thick makes it light weight and easy to carry• The Tee Master has a 1” to 6” scale graduated in 1/8” increments• Comes with complete instructions

T-56Z Stanley® Leverlock 1” x 30’ Tape

• Power return tape rule with automatic bottom lock for easy operation• Special Tru-Zero hook allows use of nail as pivot to draw circles and arcs

T-59B Digaroo™ Fabrication Tool

• Simple cutting tool used to fabricate light density foam insulations, like polyisocyanurate, phenolic foam, bead board, and Styrofoam™

• Digs in deep for a nice clean look• Ergonomic 5” long soft red handle• Sharp 1/2” wide and 1” long stainless steel blades• Lightweight design• Ideal for lightweight foams• Ideal for refrigeration jobs• Can be used to cut out for heat tracing

T-60D Crescent® 3 7/8” Scratch Awl

• 3 7/8” Long Steel Shaft• Wood Handle

T-60F Malco® Large Grip 3 1/2” Scratch Awl

• Use to scribe lines on metal, plastic and a variety of other material• Pierce holes in wood, plastic, or leather; even light gauge metal• Perfect for splitting saddles

T-62A Tapered File Stone• Excellent abrasive surface• 14” in length• Durable red colored wood handle

tape measures, Layout Gore Rule, Tee Master, scratch awls, File Stone


wiss® offset pattern snipT-65DMfg. ID W7BWN

clauss® 9” true professional titanium shearT-63TMfg. ID 18054

clauss® extrem-edge titanium bonded shearsT-63SMfg. ID 18091

clauss® 8” Stainless Steel bent scissorsT-63PMfg. ID 18343

Malco® turbo shearsT-63NMfg. ID TS1

wiss® J-7 light metal straight cutting snipsT-63MMfg. ID J7S

clauss® 7” curved light metal cutting snipsT-63HMfg. ID 23000

clauss® 8” high leverage sure-set shearsT-63KMfg. ID 11200C

clauss® industrial shearsT-63FMfg. ID 11360

clauss® stainless steel 9” bent shearsT-63EMfg. ID 18400

clauss® multi-purpose shearsT-63CMfg. ID 11100C

accusharp® Scissor SharpenerT-62DMfg. ID 2C

Accusharp® Knife sharpenerT-62CMfg. ID 1C

Knife & Scissor sharpeners, shears, snips



T-62C AccuSharp® Knife Sharpener

• A razor sharp edge in 10 seconds• Diamond honed tungsten carbide blades• Reversible blades have a total expected life of 2-3 years in normal commercial use

T-62D AccuSharp® Scissor Sharpener

• Large ergonomic handle fits either hand safely and securely• Full length finger guard protects the user’s fingers during use• Sharpening blades are diamond honed, tungsten carbide; providing years of reliable use

T-63C Clauss® Multi-Purpose Shears

• Hot forged, thru-hardened and fully double-plated chrome over nickel• Extra leverage for cutting thick, tough materials• Cut length - 2” Overall length - 7 3/4”

T-63E Clauss® Stainless Steel 9” Bent Shears

• Heavy duty shears with thick Stainless Steel blades• Long lasting edges will withstand use• Ergonomic nylon handles are designed for comfort

T-63F Clauss® Industrial Shears• Blades slice easily through heavy fabrics, rubber roofing, and canvas• Full chrome with polished handles• Cut length - 5 1/4” Overall length - 12 1/2”

T-63H Clauss® 7” Curved Light Metal Cutting Snips

• For precise metal cutting and trimming• These hot forged cutters are perfect for spurs and jagged edges

T-63K Clauss® 8” High Leverage SureSet Shears

• Multi-purpose and specialty high leverage shears• Hot forged, thru-hardened, fully double plated chrome over nickel• One blade serrated to prevent slip-out

T-63M Wiss® J-7 Light Metal Straight Cutting Snips

• Solid steel light metal cutting snips• Hot drop forged - Polished blades

T-63N Malco® Turbo Shears

• Inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill• Makes straight cuts or is capable of navigating tight curved patterns and squares in heavy

20 gauge galvanized steel• Cutting applications include ferrous and non-ferrous sheet-metals, metal roofing/building

panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets

T-63P Clauss® 8” Stainless Steel Bent Scissors

• Heavy duty shears with thick Stainless Steel blades• Long lasting edges will withstand use• Ergonomic nylon handles are designed for comfort

T-63S Clauss® ExtremEdge Titanium Bonded Shears

• Features Titanium Bonded blades that are 3x harder than Stainless Steel so they stay sharper longer

• The blades are made to resist corrosion and adhesives• Capable of cutting multiple layers of material

T-63T Clauss® 9” True Professional Titanium Shear

• Features Titanium Bonded blades that are 3x harder than Stainless Steel so they stay sharper longer

• The blades are made to resist corrosion and adhesives• Comfort RibGrip handles

T-65D Wiss® Offset Pattern Snip• Offset handles keep material away from hands for easier cutting and safety• Blades individually hand edged for maximum cutting efficiency• Cuts up 18 gauge low carbon steel

Knife & Scissor sharpeners, shears, snips


snips

offset aviation snips

Straight Cut aviation snips

Left & Right upright aviation snips

straight cut aviation snips

T-65FMfg. ID

MWT-6710R

T-65UR-LMfg. ID

MWT-6900L

T-65EMfg. ID

MWT-6716B

T-65JMfg. ID

MWT-6716R

T-65GMfg. ID

MWT-6710L

T-65VMfg. ID M3R

T-65WMfg. ID M2R

T-65XMfg. ID M1R

T-65UR-RMfg. ID

MWT-6900R

T-65HMfg. ID

MWT-6716S

T-65KMfg. ID

MWT-6716L

T-65-41RMfg. ID M4R

T-65-M300Mfg. ID M300

SPECIAL SERIES snips

T-65BBMfg. ID M2RS1

T-65CCMfg. ID M1RS1

offset aviation snips

T-65LMfg. ID M7R

T-65MMfg. ID M6R

straight pattern snips

T-65LLMfg. ID A9N

T-65KKMfg. ID A10N

T-65JJMfg. ID A11N

snips


snips


T-65E Midwest Snips® Bulldog Snip

• Nominal Length: 9”, Cut Length: 7/8”, Cutting Capacity (CR/SS): 16/18• Notch cuts

T-65F Midwest Snips® Offset Aviation Snip

• Nominal Length: 9-3/4”, Cut Length: 1-1/4”, Cutting Capacity (CR/SS): 18/22• Cuts tight right curves and straight• Kush’n-Power comfort grips

T-65G Midwest Snips® Offset Aviation Snip

• Blades are hot drop-forged of molybdenum alloy steel for exceptional strength and durability• Heavy gauge half hard steel handles will not collapse from hand pressure• Cutting capacity of 18 gauge cold rolled steel or 22 gauge stainless steel sheet metal

T-65M Wiss® Metalmaster Offset Snips - Red Handle

• Jaws are made of extra tough and wear-resistant special molybdenum steel• Cutting capacity - 18 gauge low carbon steel

T-65L Wiss® Metalmaster Offset Snips - Green Handle

• Jaws are made of extra tough and wear-resistant special molybdenum steel• Cutting capacity - 18 gauge low carbon steel

T-65BB Wiss® Metalmaster Special Series Snip - Right Cut

• Blades are specially hardened to cut exotic metals• Cutting Capacity 18 gauge Stainless Steel

T-65CC Wiss® Metalmaster Special Series Snip - Left Cut

• Blades are specially hardened to cut exotic metals• Cutting Capacity 18 gauge Stainless Steel

T-65H Midwest Snips® Aviation Snip - Yellow Handle

• Nominal Length: 9-3/4”, Cut Length: 1-3/8”, Cutting Capacity (CR/SS): 18/22• Cuts wide left and right curves and straight

T-65J Midwest Snips® Aviation Snip - Green Handle

• Nominal Length: 9-3/4”, Cut Length: 1-1/4”, Cutting Capacity (CR/SS): 18/22• Cuts wide right curves and straight

T-65K Midwest Snips® Aviation Snip - Red Handle

• Nominal Length: 9-3/4”, Cut Length: 1-1/4”, Cutting Capacity (CR/SS): 18/22• Cuts wide left curves and straight

T-65V Wiss® Metalmaster Aviation Snip - Yellow Handle

• Non-Slip serrated jaws are made of extra tough, wear-resistant, special molybdenum steel• Cutting capacity - 18 gauge low carbon steel

T-65W Wiss® Metalmaster Aviation Snip - Green Handle


T-65X Wiss® Metalmaster Aviation Snip - Red Handle


T-65UR-L Midwest Snips® Upright Snip - Red Handle

• Right angle blades make cutting easier in tight spaces and overhead• Hot drop-forged blades that are virtually unbreakable and provide the longest edge life• Cutting capacity 24 gauge cold rolled steel and 28 gauge stainless steel

T-65UR-R Midwest Snips® Upright Snip - Green Handle

• Right angle blades make cutting easier in tight spaces and overhead• Hot drop-forged blades that are virtually unbreakable and provide the longest edge life• Cutting capacity 24 gauge cold rolled steel and 28 gauge stainless steel

T-65JJ Wiss® 9 3/4” Straight Pattern Snips

• Cuts straight and wide curves when trimming light gauge stock• Blades are individually hand edged for maximum cutting efficiency• Cutting Capacity 23 gauge low carbon steel

T-65KK Wiss® 11” Straight Pattern Snips


T-65LL Wiss® 12 1/2” Straight Pattern Snips


T-65-41R Wiss® Metalmaster Pipe and Duct Snip

• Cuts curves, straight or any combination in duct work, seams or sheet metal• Patented ball-bearing jaw action automatically adjusts blade clearance• Cutting capacity 20 gauge low carbon steel

T-65-M300 Wiss® 10 1/2” Multimaster Snip

• Combines the cut of tinners snips with the strength of compound action• Compound action multiplies the force of the hand by 5 times• Cutting capacity 20 gauge low carbon steel


snips

offset snips

mini offset aviation snips

T-65GGMfg. ID M2007

T-65-M6Mfg. ID AVM6EV

T-65HHMfg. ID M2006

T-65-M7Mfg. ID AVM7EV


T-65GG Malco® Max 2000 Offset Snips - Green Handle

• Serrated upper jaw offers solid gripping power with less burring• A full 1 1/4” cutting length and a cutting plane offset from handles makes trim cuts

both accessible and efficient• Cutting Capacity 18 gauge galvanized steel and 20 gauge stainless steel

T-65HH Malco® Max 2000 Offset Snips - Red Handle

• Serrated upper jaw offers solid gripping power with less burring• A full 1 1/4” cutting length and a cutting plane offset from handles makes trim cuts

both accessible and efficient• Cutting Capacity 18 gauge galvanized steel and 20 gauge stainless steel

T-65-M6 Malco® Mini Offset Aviation Snip - Red

• Easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. Overall Length 7 1/8”

• A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels

• The Malco Mini Aviation Snips offset design provides superior material flow in 24-gauge (0.61 mm) cold rolled and (0.71 mm) galvanized steel for making sharp square cuts, tight 5 inch (125 mm) diameter circles and straight line cuts, even on curved surfaces

T-65-M7 Malco® Mini Offset Aviation Snip - Green

T-65-PC Klenk® Pipe CutterSlot or Double Cut

• Cuts round, oval and black pipe downspout• Maximum opening jaws provide better bite• Made of the finest hardened steel

T-65-PCMfg. ID MA71500

PIPE cutters


Female shiplap tools

Right modified shiplap Tools

Male Shiplap tools

End cut-off tool (4 in 1 cut)

Left modified shiplap Tools

Right/Left modified shiplap Tools

Miter Cut or 90° Vee Groove Tool

T-130 Mfg. ID 2101 Female Shiplap Tool for 2” DuctboardT-138 Mfg. ID 1086 Female Shiplap Tool for 1 1/2” DuctboardT-145 Mfg. ID 1101 Female Shiplap Tool for 1” Ductboard

Female Shiplap Tool cuts female slip joint, also cuts seating edge of duct board at longitudinal closure corner. Tool color: Black

T-132 Mfg. ID 2104 Right Modified Shiplap Tool for 2” DuctboardT-139 Mfg. ID 1412 Right Modified Shiplap Tool for 1 1/2” DuctboardT-146 Mfg. ID 1402 Right Modified Shiplap Tool for 1” Ductboard

Modified Shiplap Tool removes insulation for shiplap corner folds.Tool color: Orange

T-134 Mfg. ID 2103 Male Shiplap Tool for 2” DuctboardT-141 Mfg. ID 1106 Male Shiplap Tool for 1 1/2” DuctboardT-148 Mfg. ID 1103 Male Shiplap Tool for 1” Ductboard

Male Shiplap Tool cuts male slip joints which mates with female slip joints to connect two duct sections. Tool color: Yellow

T-136 Mfg. ID 2102 End Cut-Off Tool for 2” DuctboardT-143 Mfg. ID 1087 End Cut-Off Tool for 1 1/2” DuctboardT-153 Mfg. ID 1102 End Cut-Off Tool for 1” Ductboard

End Cut-Off Tool cuts shiplap on end of board for longitudinal corner closure, plus staple flap. Tool color: Blue

T-133 Mfg. ID 2105 Left Modified Shiplap Tool for 2” DuctboardT-140 Mfg. ID 1413 Left Modified Shiplap Tool for 1 1/2” DuctboardT-147 Mfg. ID 1403 Left Modified Shiplap Tool for 1” Ductboard

Modified Shiplap Tool removes insulation for shiplap corner folds. Tool color: Orange

T-135 Mfg. ID 2106 Right/Left Modified Shiplap Tool for 2” DuctboardT-142 Mfg. ID 1415 Right/Left Modified Shiplap Tool for 1 1/2” DuctboardT-149 Mfg. ID 1400 Right/Left Modified Shiplap Tool for 1” Ductboard

Modified Shiplap Tool removes insulation for shiplap corner folds. Reversing the tool allows for both left and right hand shiplaps to be cut. Tool color: Orange

T-137 Mfg. ID 2100 Miter Cut or 90° Vee Groove Tool for 2” DuctboardT-144 Mfg. ID 1084 Miter Cut or 90° Vee Groove Tool for 1 1/2” DuctboardT-154 Mfg. ID 1100 Miter Cut or 90° Vee Groove Tool for 1” Ductboard

Vee Groove Tool cuts 90° Vee Grooves for corner folds when modified shiplap grooving methods are not used. Tool color: Red

Fiber Glass & Duct Board Tools


markwell® sc7 pneumatic hog ring gunT-68-SC7Mfg. ID SC7

markwell® pneumatic L3-OCA outward clinch staple gunT-68OCAMfg. ID L3-OCA

Tackers & Staples

Markwell® L3-CS outwardclinch tackerT-68KMfg. ID L3

Buckaroos® red & black G-26 outward clinch tackersT-68AA / T-68-BL26Mfg. ID G-26

markwell® l4-cs outwardclinch tackerT-68AMfg. ID L4

buckaroos® red & Black g-5 outwardclinch tackersT-68-5 / T-68-BL5Mfg. ID G-5

Red G-26 OutwardClinch TackerPart # T-68AA Mfg. ID G-26 RED

• Designed for pipe and duct insulation• Designed to shoot STCR 2619 type fine wire staples to a 1/2” leg length• Outward clinch door is easily removable for front loading of staples or replacement

The G-26 uses the following Buckaroos® Brand Staples T-68V-38 Buckaroos® STCR 2619-3/8” Staples; 5,000 per box T-68V Buckaroos® STCR 2619-1/2” Staples; 5,000 per box T-68V4 Buckaroos® STCR 2619-1/2” Staples; 1 box contains 4 boxes of 1,250 T-68V-SS Buckaroos® STCR 2619-1/2” Stainless Steel Staples; 5,000 per box



T-68AAT-68-BL26

Buckaroos® Red & Black G-26 Outward Clinch Tackers

• Designed for pipe and duct insulation• Designed to shoot Buckaroos STCR 2619 type fine wire staples to a 1/2” leg length• Outward clinch door is easily removable for front loading of staples or replacement

Staples Used in the G-26 Tackers - Buckaroos G-26 Outward Clinch Tackers are for use with Buckaroos Staples only.

T-68V4 Buckaroos® STCR 2619-1/2” • Galvanized• Pocket Packs (4 boxes of 1,250)

T-68V-SS & T-68V-SS-F Buckaroos® STCR 2619-1/2”

• Stainless Steel• Bulk Packs (5,000/box)

T-68V-38 Buckaroos® STCR 2619-3/8” • Galvanized• Bulk Packs (5,000/box)

T-68-5T-68-BL5

Buckaroos® Red & Black G-5 Outward Clinch Tackers

• Designed for pipe and duct insulation• Similar to the Buckaroos Red G-26 Outward Clinch Tacker, the G-5 is designed to shoot

heavy duty STCR 5019 type staple to a 9/16’’ leg length• Outward clinch door is easily removable for front loading of staples or replacement

Staples Used in the G-5 Tackers - Buckaroos G-5 Outward Clinch Tackers are for use with Buckaroos Staples only.

T-68-5BQ Buckaroos® STCR 5019-9/16” • Galvanized• Pocket Packs (4 boxes of 1,000)

T-68-5A Buckaroos® STCR 5019-1/2” • Galvanized• Bulk Packs (5,000/box)

T-685-38 Buckaroos® STCR 5019-3/8” • Galvanized• Bulk Packs (5,000/box)

T-68A Markwell® L4-CS Outward Clinch Tacker

• Designed for pipe and duct insulation• Rugged steel construction with a removable and easily replaceable outward clinch door• For use with Markwell’s L4 series fine wire staples up to a 1/2” leg length

Staples Used in the L-4-CS Tacker

T-68A Markwell® L4-D 1/2” Staple• Galvanized• Bulk Packs (5,000/box)

T-68K Markwell® L3-CS Outward Clinch Tacker

• Designed for pipe and duct insulation• Rugged steel construction with a removable and easily replaceable outward clinch door• For use with Markwell’s L3 series heavy gauge staples up to a 9/16” leg length

Staples Used in the L-3-CS Tacker

T-68X Markwell® L3-D 9/16” Staple • Galvanized• Bulk Packs (5,000/box)

T-68OCA Markwell® Pneumatic L3-OCA Outward Clinch Staple Gun

• Features an easily exchangeable patented outward clinch door• Bottom loading for quick staple loading• Lightweight only weighs 2 pounds and ships in its own storage case complete with a 1/4”

NPT hose fitting• Designed to shoot Markwell Brand L3 Staples up to a 9/16” leg length

Staples Used in the L3-OCA Pneumatic Tacker

T-68X Markwell® L3-D 9/16” Staple• Galvanized• Bulk Packs (5,000/box)

T-68-SC7 Markwell® SC7 Pneumatic Hog Ring Gun

• Used for assembling insulated blankets for heated pressure vessels and piping systems• Attaching fabrics and sheet materials to wire in the automotive, upholstery, bedding, and

furniture industries• Connecting intersecting or parallel wires for cage, trap, and fencing assemblies

Hog Rings Used in the SC7 Pneumatic Hog Ring Gun

T-68-HR34 Markwell® 15-3/4” Hog Ring • Galvanized• 10,000 Hog Rings per Carton

T-68-HR-SS Markwell® 15SS-100 Hog Ring• Stainless Steel• 10,000 Hog Rings per Carton

Tackers & Staples


bostitch® P-7 Hog Ring PliersT-68-P7Mfg. ID P7

Tackers & Staples

Markwell® G-7 Hog ring plierT-68YMfg. ID G-7

markwell® MP6-6 and Mp6-8stapling pliersT-68-MP6 / T-68-MP8Mfg. ID MP6-6 / MP6-8

markwell® HSP-12 Stapling plierT-68-HSPMfg. ID HSP-12

Bostitch® P6C-6 and P6C-8Stapling PliersT-93 / T-99Mfg. ID P6C-6 / P6C-8

Replacement PartsMarkwell® L4-CS Outward Clinch Replacement Door T-68W

Markwell® L3-CS Outward Clinch Replacement Door T-68W-3

Markwell® G-5 Outward Clinch Replacement Door T-68W-5

Markwell® G-5 Hardened Outward Clinch Replacement Door T-68W5-H

Markwell® G-26 Red Outward Clinch Replacement Door T-68WW

Markwell® G-26 Hardened Outward Clinch Replacement Door T-68WWH

STAPLESBuckaroos® STCR 5019-1/2” Type Staples T-68-5A

Buckaroos® STCR 5019-9/16” Staples T-68-5BQ

Buckaroos® STCR 5019-3/8” Type Staples (5M) T-685-38

Markwell® L4D-1/2” Staples (5m/box) T-68B

Markwell® L3-1/2” Staples (5m/box) T-68M

Buckaroos® STCR 2619-3/8” Type Staples T-68V-38

Buckaroos® STCR 2619-1/2” Pocket Pack Staples T-68V4

Markwell® L3D-9/16” Staples (5m/box) T-68X

Bostitch® STCR 2619-3/8” Staples T-92

Hog ringsMarkwell® 11/16” Galvanized Hog Rings (2,500/box) T-68Z-11/16

Markwell® HR616 11/16” Stainless Steel (2,500/box) T-68Z-11/16SS

Markwell® Galvanized 3/4” Pneumatic Hog Rings 10M T-68-HR34

Markwell® Stainless Steel 3/4” Pneumatic Hog Rings 10M T-68-HRSS



T-68-MP6T-68-MP8

Markwell® MP6-6 & MP6-8 Stapling Pliers

• Manufactured from heavy gauge, hardened steel, epoxy coated• Features top staple loading, no removable parts, and a deep reach throat depth

Staples Used in the MP6-6 Stapling Pliers

T-68V-38 Buckaroos® STCR 2619-3/8” • Galvanized• Bulk Packs (5,000/Box)

T-92 Bostitch® STCR 2619-3/8” • Galvanized• Bulk Packs (5,000/Box)

Staples Used in the MP6-8 Stapling Pliers

T-685-38 Buckaroos® STCR 5019-3/8” • Galvanized• Bulk Packs (5,000/Box)


T-93T-99

Bostitch® P6C-6 & P6C-8 Stapling Pliers

• Case hardened steel components for extreme durability• Ergonomic design and patented easy squeeze bearing system• Coated top-load magazine permits faster and smoother staple loading

Staples Used in the P6C-6 Stapling Pliers

T-68V-38 Buckaroos® STCR 2619-3/8” • Galvanized• Bulk Packs (5,000/Box)


Staples Used in the P6C-8 Stapling Pliers



T-68-HSP Markwell® HSP-12 Stapling Plier

• Heavy duty stapling plier designed for industrial applications• Rear loading, lightweight and easy to use / Ideal for duct wrap insulation

Staples Used in the HSP-12 Stapling Pliers


T-68Y Markwell® G-7 Hog Ring Plier

• Great for removable and reusable insulation / Easy loading• Made to use the Ring 616-11/16” Hog Ring

Hog Rings Used in the G-7 Hog Ring Plier

T-68Z-11/16 Markwell® 11/16” Hog Ring • Galvanized• 2,500 Hog Rings per Carton

T-68Z-11/16SS Markwell® HR616 11/16” • Stainless Steel• 2,500 Hog Rings per Carton

T-68-P7 Bostitch® P-7Hog Ring Pliers

• Spring loaded magazine feed• Case hardened steel components for extreme durability• Automatic feed system for easy use and productivity

Hog Rings Used in the P-7 Hog Ring Plier

T-68Z-11/16 Markwell® 11/16” Hog Ring • Galvanized• 2,500 Hog Rings per Carton

T-68Z-11/16SS Markwell® HR616 11/16” • Stainless Steel• 2,500 Hog Rings per Carton

Tackers & Staples


marshalltown® bullnose pointing trowelT-75DMfg. ID 47A

marshalltown® Insulators english pointing trowelT-75BMfg. ID 48A

Malco® Trammel Replacement pointsT-74DMfg. ID TRP

Accu Trowel Short SetT-75HMfg. ID short set

Malco® sheet metal scribeT-74FMfg. ID A40

Malco® tr-42 trammel PointT-74CMfg. ID TR42

marshalltown® flexible pointing trowelT-75AMfg. ID 45 6A

accu trowel full setT-75GMfg. ID full set

No. 88 double butt gaugeT-74GMfg. ID #88

marshalltown® insulatorsfinishing trowelT-75EMfg. ID MXS91

trammel points, scribes, gauges, trowels

General tools® Trammel PointsT-74AMfg. ID 523

Malco® TR-18 Trammel PointT-74BMfg. ID TR18



T-74A General Tools® Trammel Points

• Accurately measures, marks distances too great for conventional compasses and dividers• For layouts, making templates, and drawing large circles• Points can be replaced with pencils, ball point pens, crayons, or soap sticks for marking

various types of material

T-74B Malco® TR-18 Trammel Point

• Handles a variety of layout applications• All steel construction• Points can be sharpened or replaced• Maximum radius of 18”• Replacement points available (T-74D)

T-74C Malco® TR-42 Trammel Point

• Can handle a variety of layout applications• All steel construction• Points can be sharpened or replaced• Maximum radius of 42”• Replacement points available (T-74D)

T-74D Malco® Trammel Replacement Points • Replacement points for T-74B and T-74C Trammel Points

T-74F Malco® Sheet Metal Scribe

• Scribe commonplace trim lines on galvanized sheet metal quickly and accurately• Features ten pre-set scribing depths from 1/8” to 1”• Each scribing depth features a dual edged point to create clean, readable, and accurate

score lines parallel to the edge of the metal sheet

T-74G No. 88 Double Butt Gauge

• Allows for scribing two different lines of measurement on any given surface, without stopping and readjust for the second measurement

• Feature 6” adjustable bars and quality laser-inscribed measurements• The gauge is securely locked by a knurled clamp screw

T-75A Marshalltown® Flexible Pointing Trowel

• Very flexible blade• Forged high grade steel• Hardwood handle with polished steel ferrule

T-75B Marshalltown® Insulators English Pointing Trowel

• Forged from a single piece of high grade tool steel• Tempered and carefully taper-ground and polished• Flexible blade specially designed for working with insulation (7” x 3 3/8”)

T-75D Marshalltown® Bullnose Pointing Trowel

• Forged from a single piece of high grade tool steel• Tempered and carefully taper-ground and polished• Flexible blade specially designed for working with insulation (5 1/2” x 1 7/8”)

T-75E Marshalltown® Insulators Finishing Trowel

• Highest grade hardened and tempered spring steel blade• Beveled work edges prevent surface aggregate popping• Comfortable curved basil wood handle

T-75G Accu Trowel Full Set

• Made specifically for applying Polyguard RG-2400 to exposed piping• Saves labor & reduces material waste• Precise coverage that is accurate to 25 mil thickness• Constructed of T304 Stainless Steel• Accutrowel Full Set includes the following sizes: 2”, 2.5”, 3”, 4”, 5”, 6”, 7”, 8”, 10” & 12”

T-75H Accu Trowel Short Set

• Made specifically for applying Polyguard RG-2400 to exposed piping• Saves labor & reduces material waste• Precise coverage that is accurate to 25 mil thickness• Constructed of T304 Stainless Steel• Accutrowel Short Set includes the following sizes: 2”, 4”, 6”, 8”, & 12”

trammel points, scribes, gauges, trowels


Osborne® wing DIVIDER 12”T-76MMfg. ID 106-12

Malco® #24 RAD DIVIDERST-76EMfg. ID 24

Malco® #18 RAD DIVIDERST-76DMfg. ID 18

Osborne® wing DIVIDER 8”T-76LMfg. ID 106-8

BUCKAROOS® Insulation depth gaugeT-56DGMfg. ID 050-62

DIVIDERS & Insulation Depth Gauge

General tools® 8” Flat legwing dividerT-76AMfg. ID 450-8

General tools® 12” Flat legwing dividerT-76BMfg. ID 450-12


T-56DG Buckaroos® Insulation Depth Gauge • Measures up to 6” of pipe insulation

T-76A General Tools® 8” Flat Leg Wing Divider

• Perfect for a variety of uses including tracing contours and scribing circles in metal• Forged from special caliper steel, with hardened points for marking and scribing• Adjusting screw has a self seating washer and nut for quick adjustments

T-76B General Tools® 12” Flat Leg Wing Divider

• Perfect for a variety of uses including tracing contours and scribing circles in metal• Forged from special caliper steel, with hardened points for marking and scribing• Adjusting screw has a self seating washer and nut for quick adjustments

T-76D Malco® #18 Rad Dividers• For circle sizes up to 32” in diameter• Points can be easily sharpened or replaced• Replacement points for the Malco Rad Divider (T-76F)

T-76E Malco® #24 Rad Dividers• For circle sizes up to 42” in diameter• Points can be easily sharpened or replaced• Replacement points for the Malco Rad Divider (T-76F)

T-76F Rad Dividers Replacement Points • Replacement points for the Malco Rad Dividers (T-76D & T-76E)

T-76L Osborne® Wing Divider 8”

• The nuts on the wings are made of solid steel, washers are made of turned brass• The springs are carefully tempered and are made for easy adjustment while holding the

legs firmly in place• Forged polished steel construction

T-76M Osborne® Wing Divider 12”

• The nuts on the wings are made of solid steel, washers are made of turned brass• The springs are carefully tempered and are made for easy adjustment while holding the

legs firmly in place• Forged polished steel construction


Buckaroos Insulators Starter KitPart # T-SK Mfg. ID T-SK

Starter Kit includes:T-9D Workhorse® 35 Pocket Tool Carrier

T-13A Buckaroos® Red Pipe Caliper

T-36RR Russell International® Curved Blade 6” Boning Knife

T-36HB Dexter® #1376-HB Flexible Ham Boning Knife

T-36UK Wiss® Utility Knife

T-62C Accusharp® Knife Sharpener

T-58B Stanley® Wallboard Saw

T-58E Stanley® Shortcut Tool Box Saw

T-45B Channellock® 8” End Cut Nippers

T-56F Stanley® Diameter & Circumference Tape Measure

T-56HV-1 Lufkin® 1/2” x 12’ Hi-Viz Orange P1000 Tape Measure

T-60F Malco® Large Grip 3 1/2” Scratch Awl

T-63P Clauss® 8” Stainless Steel Bent Trim Scissor

T-65F Midwest Snips® Offset Aviation Snip - Green Handle

T-65G Midwest Snips® Offset Aviation Snip - Red Handle

T-75A Flexible Pointing Trowel

buckaroos tool catalogbungee cinch w/cord attached t-12frp cinch only • perfect as a metal...

Documents