build your own custom chicken coop - hgtv.com chicken coop designed by: mick telkamp for instruction...
TRANSCRIPT
hgtvgardens.com
BUILD YOUR OWN
Custom Chicken Coop
Designed by:
Mick Telkampfor
I N S T R U C T I O N M A N U A L
Detailed plans and instructions to start building your custom coop today!
Front
1
2 2” x 4” x 8’, notched at ends and at 24” and 48” on center
3
5
7
4
6
1 1 1 2 3
4
4
5
6
7 7
8 6
9 9
8
9
2” x 4” x 6’, notched at ends and at 24” on center
2” x 4” x 4’
2” x 4” x 33-3/4” (x2)
2” x 4” x 120”’ (x2)
2” x 4” x 45” (x2)
2” x 4” x 38”
2” x 4” x 17-3/4” (x2)
12”
82”
9” 9”
DOORWINDOW
1/4” HardwareCloth
Siding
Hardware cloth and siding cut to size and attached once structure is fully assembled
2” x 4” x 8’, notched at ends and at 48” on center (x3)
Back
1 123
4
5
6
6
1
2
3
4
5
6
2” x 4” x 6’, notched at ends and at 48” on center (x2)
2” x 4” x 6’, notched at ends and at 24” on center
2” x 4” x 6’, notched at ends and at 24” and 48” on center
2” x 4” x 4’
2” x 4” x 72-1/2”
2” x 4” x 120” (x2)
34-1/2” 34-1/2”
1/4” HardwareCloth
Siding
Hardware cloth and siding cut to size and attached once structure is fully assembled
Sides
1*
3*
4*
RightLeft
1
3
4
2
2” x 4” x 75”, 19 degree cut at each end (x2)
2” x 4” x 69”, (x4)
2” x 4” x 65” (x5)
5 2” x 4” x 30” (x2)
2” x 4” x 70-1/2”, 19 degree cut at each end (x2)
OUTSIDE
INSIDE
Top View*Structural frame sides are doublethickness, with the shorter plank on theoutside.
2*
1*
3*
4*
2*
3*
4*
3*
4*
4
5 5
NESTBOXES
1/4” HardwareCloth
Siding
Hardware cloth and siding cut to size and attached once structure is fully assembled
20”23”21-1/2”23”20”
Roof
1
2
1 21 11
3 3 3 3 3
3
2” x 4” x 75”-1/2”, 19 degree cut at each end (x4)
2” x 4” x 70-1/2”, 19 degree cut at each end
Ribbed roof panels - 26” x 84”(x5)
4” overhangon front
2-1/2” overhangon back
Front
Back 1-1/2” overhangon sides
1
Inside Wall
Coop Enclosure
1
2 23
4
5
ACCESS DOORS
CHICKENACCESS
12345
Top View
7
8
9(FLOOR)
RUN
78
9
12”
6
2 x 4 x 65” (x2)
2 x 4 x 39” (x2)
2 x 4 x 23-1/2”
2 x 4 x 22”
2 x 4 x 12”
2 x 4 x 41-3/4”
2 x 4 x 69”
3/4” x 48” x 72” (notched at corners)
3/4” x 3/4” x 36” (x2)
Siding
Siding cut to size and attached once structure is fully assembled
6
6
Nesting/Storage
Nesting/Storage Bump Out
Frame Face DoorsAttach each door to frame face with two 3” hingesPosition crossbucks last, then mark and cut “X” overlap on one piece.
Nesting Box InsertPlace inside to line up with pass-through once bump-out is attached to coop.
12”
1
1
1
1
2 2b
33 34
5 5
66
7 7
8 8
9
9
10
10
11
111212
1313 14
16
15
17 17
18
18
19
19
20 17 17
18
18
19
19
2b is not attached to bump out. Attach to coop to hang in place.
20
Attach to front of frame (flush on all sides)
Nesting/Storage Materials
12
3
4
5
6
7
9
10
11
12
1314
1516171819
20
1” x 3-1/2” x 36” (x2)
1” x 3-1/2” x 34-1/2”, beveled 45 degrees along one long
1” x 3-1/2” x 10-1/2” (x3)
3/4” x 12” x 36” plywood
1” x 3-1/2” x 31-1/2” angle cut at one end to 30” on one long side (x2)
1” x 3-1/2” x 34” angle cut at one end to 32-3/4” on one long side (x2)
Ribbed roof panel 24” x 15” (x2)
Siding 12” x 39” angle cut to 35”on one long side (x2)
1” x 3-1/2” x 13” (x2)
1” x 3-1/2” x 12” (x2)
3/4” x 12” x 12-3/4” (x2)
Siding 12” x 28”
1-3/4” x 34-3/4” (x4)
1-3/4” x 28-3/4” (x2)
1-3/4” x 33-1/2”
4-1/4” x 33-1/2” (x2)
3-1/2” x 28-5/8” (x4)
3-1/2” x 8-3/4” (x4)
1-1/2” x 1/4”23-1/2” cut at 25 degrees (x4)
Siding 15-1/2” x 28-1/2” (x2)
8
Access Doors
Access Doors/Ramp/Flower Box
1 1
2
2
3
3
4
1 1
2
2
3
3
5
Top VIew
Ramp 6
6
7 7 7 7 7 7 7 7 7
Flower Box
8 8
10
11
9
12
1213
13
12
12
14
1
2
3
4
5
1” x 3-1/2” x 39” (x4)
1” x 3-1/2” x 10-1/2” (x4)
1/4” x 1-1/2” x 23-1/2” cut at 22 degrees (x4)
Siding 18” x 39”
Siding 17” x 39”
65/4 board x60” (x2)
73/4” x 3/4” x 11” (x9)
8
10
1114
14 is spacer attached to coop to secure.
12
13
Spacer 1”x5-1/2”x22”
1” x 1” x 8-1/2” mitred at one end (x4)
1” x 1” x 25” mitred at both ends (x2)
9
1” x 5-1/2” x 7-1/4” (x3)
1” x 5-1/2” x 23”
1” x 5-1/2” x 24-1/2”
1” x 5-1/2” x 6-1/2” (x3)
Backing attached flush at outside edges