Building A BirdhouseBy: Dean Kuhn

Blueprint:Features:1. Length and width of

every PVC piece2. Amount of PVC needed3. Tools that may be

needed4. Pictures of what the

PVC pieces and the finished result should look like

Tools:Tools: 1. Azek PVC(Premature Ventricular Contraction)

2. Drill / Driver3. Circular Saw4. Screws/Nails5. Pencil6. Ruler7. Drill Bit

Steps:Steps:1. Measure out PVC according to

blueprint2. Cut PVC with circular saw3. Use a drill / driver to put the

pieces of PVC together with screws

4. Use a drill bit to add a hole into the front of the birdhouse and a smaller drill bit to add the two bottom holes

5. Clean up everything

Finish: Time (1 Birdhouse): Approx. 40 min

Fun Fact: We actually build three birdhouses, building for 90 minutes!