building and structural design codes

TH42086

Building and Stmctural Design Codes

An international survey

Business Information

0 British Standards Institution 2000

Except as permitted by Copyright Law no extract may be repro transmitted in any form or by any means - prior permission in writing from BSI. If permission is a licensing agreement. Details and advice

stored in a retrieval system or

royalty payments or

Chiswick High Road, London W4 4AL.

Whilst every effort is made to ensure the accuracy of information, no responsibility, legal or otherwise is accepted for any errors, omissions or inaccuracy.

Compliance with a British Standard does not of itself confer immunity from legal obligations.

ISBN 0 580 36642 1

e BSI International Survey Structural Design Codes

CONTENTS

Page

1. Preface 2. Introduction 3. Europe 4. List of European Building Research Institutions 5. Current Eurocodes 6. Country Datasheets

Europe AUSTRIA BELGIUM DENMARK FINLAND FRANCE GERMANY GREECE ICELAND

Rest of World ARGENTINA ARMENIA AUSTRALIA AZERBAIJAN BAHAMAS BELARUS BERMUDA

BRAZIL BULGARIA CANADA

BOSNIA-HERZEGOVIN A

CANADA- ALBERTA CANADA-NEW BRUNSWICK CROATIA CHINA CYPRUS CZECH REPUBLIC ESTONIA EGYPT FIJI GEORGIA HONG KONG HUNGARY INDIA INDONESIA

ITALY IRELAND NETHERLANDS NORWAY PORTUGAL SPAIN SWEDEN

UNITED fiINGDOM SWITZER~AND

ISRAEL IVORY COAST

JAPAN KY RGY ZTAN LATVIA LITHUANIA MALTA MOLDOVA NEPAL NEW ZEALAND POLAND PHILIPPINES ROMANIA RUSSIA SINGAPORE SLOVAKIA SLOVENIA SOUTH AFRICA TURKMENISTAN TURKEY '

UKRAINE UNITED STATES URUGUAY UZBEKISTAN VANUATU VIETNAM

Appendix 1 List of Worldwide Standards Organihations

1 3 5 7

10

0 BSI 2002 July 2002 e

BSI International Survey Structural Design Codes e PREFACE

This is the first Edition of Building and Structural De#ign Codes - An International Survey. It has been prepared with the help of Standards Bodies, Building Associations, and Government Ministries around the world.

Building and Design has, traditionally, been a locally controlled and influenced matter. Local resources and conditions, and the limits these imposkl, have been the primary influence on structural design codes.

The opening of International markets and the strides bade in innovative designs, have made Governments increasingly aware of the need to both hake regulations easily available and to consider relaxing them in order to ease International *ade. It is an area of change as new less prescriptive codes come in to existence and agreemends between nations are forged.

The publication will be updated quarterly to keep ab east of these changes. Countries not so far included will be added, as the information be 5 omes available. Developments within Europe will also be monitored and the information k@t up to date.

e

The Updates are free for the first year after purchase,of the book. Subsequently they will be made available to subscribers for an additional fee.

Included for further information is a list of International Standards bodies, and where available Construction Product Approval bodies.

Any comments and suggestions regarding the survey are always welcome and should be addressed to

Technical Information Group BSI Standards 389 Chiswick High Road London w 4 4AL

Tel: +44 (0)20 8996 7903 Fax: +44 (0)20 8996 7048

0 BSI 2001 Sep-00

BSI International Survey Structural Design Codes

e INTRODUCTION

Purpose

This publication aims to provide easy reference to International Building regulations for Structural Designers and Architects. It is a direct result of enquiries received from industry regarding the regulations, legislation, and design requirements to be met overseas.

Scope

This survey covers National Building Regulations and design Standards. The Regulatory body is cited and where applicable any acceptable Foreign Standards are also included. It is divided in to the European Economic Area and the Rest of the World so that any mutual agreements may be highlighted.

e

Sources of Information

Most countries have been sent questionnaires to their respective government departments and the information received from them has been used in compiling this document, their assistance is much appreciated. The National Standards Bodies have been instrumental in providing information or alternatively providing the relevant approval authority and their help is also acknowledged.

there is a current trend towards relaxing thig status, and many countries, including the/ UK, are beginning to discuss the be efits of Performance based Codes to all $ w for more innovative designs, this is still) the exception not the rule.

Availability of Documents

Unless otherwise stated, documents listed are in the language of the country of ori$in. En lish translations of all major foreign CO es are available through BSI Technical Inf rmation Group Translations section. BS B are also agents for the U.S.A Codes.

Bdl Technical Information Group

The Technical Information Group runs the Re$earch Centre within BSI. They provide research services to businesses and other org nizations seeking to overcome Te r hnical Barriers to Trade in the UK, Eurrope, or International arena. Fod more information contact TIG on tel:,+44 (0)20 8996 71 11 fax: +44 (0)20 8996 7048

Qu tations are available without ob1 P gation.

Otber construction publications avhilable from TIG.

CEI Marking and the Construction Products Directive (ref TH 42097)

In the case of those countries were we have not been able to obtain information, we have either provided the reason for this

Glqss in Buildings, windows, doors and furriiture (ref TH 421 19) Flammability Testing of Building Materials - Am International Survev (ref TH 42126)

in the notes section, or have not included them in this edition. Future editions will have additional countries included as the information is gathered.

Flabmability testing of hdures and fittings Acceptance of Foreign Design in buildings - An International survey (TH Codes and Standards 42127)

Fire protection and suppression in buivings - An international survey (TH Many Building Codes include mandatory

Structural Design Standards. Although 421/28)

Feb-Ol 0 BSI 2001


EUROPE

Construction Products Directive Eukocodes

Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products.

Council Directive 93/68/EEC of 22 July 1993 amending Directive 89/1 O6/EEC (construction products)

The CPD is an attempt by Europe to ensure the Safety of constructions in all countries of the European Economic Area. It lays down six essential performance requirements:

1. Mechanical resistance and stability 2. Safety in the case of fire 3. Hygiene, health and the environment 4. Safety in use 5. Protection against noise 6. Energy economy and heat retention

The Directive permits two methods of compliance a) Manufacture in compliance with

Harmonized European Standards (relevant national standards or Euronorms)

b) European Technical Approval.

At the time of going to press no Harmonized standards have been published.

Th6 series of Eurocodes provide deftnitions of building performance. They coder all aspects of the Design of st ctures and contain formulae and data whch can be used to calculate the key di I ,ensions and other design variables for an i proposed construction.

Th Eurocodes are made available in ea h member country of CEN, which includes the EC and E R A member CO ntries, by each country’s national sta dards body in the appropriate lan uage. Each member country has also pro uced a National Application Document (N I D) in the codes most appropriate to the giving definitive figures for nationally reg t: lated safety values, a schedule of sudporting national reference standards and providing guidance on application. (Sde Table 2 for quick reference to which

ntries have published NADs to which

Stil( in draft form, adoption of the codes as part of National regulations is not coTpulsory, but countries are required to recbgnize structures built to the codes as hading been adequately designed.

See Table 1 for list of published Eurocode doduments

is included in the

European Technical Approval is performed T h i following countries have also adopted by Notified bodies in the member states. In Eurpcodes: the UK this is the British Board of Czech Republic, Hungary, Agrement. Currently this is the only Slovakia. straightforward method of complying with the requirements of the Directive.

CEi Marking

Within the EU, products which are CE maked thus demonstrate compliance with

Feb-Ol 0 BSI 2001 a


countries in the EEA e.g. the UK. However in most countries it is required. Also as the CPD allows individual Member States to require different levels and classes of performance for products, manufacturers will also need to ensure that their product meets the specific national regulatory requirements of the country concerned.

Other Relevant European Directives

98/37/EC directive of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating to machinery

89/686/EEC Council Directive of 21 December 1989 on the Approximation of the laws of Member States relating to personal protective equipment

73/23/EEC Council Directive of 19 February 1973 on the harmonization of the laws of the Member States relating to electrical equipment designed for the use within certain voltage limits

89/336/EEC Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to electromagnetic compatibility.

0 BSI 2001 Feb-Ol


EUROPEAN NETWORK OF BUILDING RESEARCH INSTITUTES

Belgium

WCB-CSTC-BBRI Belgian Building Research Institute Violetstraat 21 -23, 6-1 000 Brussel Belgium

Tel: +32 2 502 66 90 Web: http:lv.ww.bbri.be

Fax: +32 2 502 81 80

Denmark

SBI Danish Building Research Institute Dr. Neergaards Vej 15, Postbox 11 9 DK-2970 Horsholm, Denmark

Tel: +45 42 86 55 33 Web: http:/hnrww.sbi.dklEnglish/English.htrn

Fax: +45 42 86 75 35

Eire

FORBAIRT Construction Industry Division Glasnevin, IR-Dublin 9 Ireland

Tel: +353 18 37 01 01 Fax: +353 18 36 81 39 Web: http:/www.forbairt.ie/

Finland

VTT Building Technology Kernistintie 3, Espoo, PO Box 1800 FIN 02044 VTT, Finland

Tel: +358 0 45 61 Web: http:llwww.vtt.f~rte/bldtech.html

Fax: +358 0 456 70 03

France

CSTB Centre Scientiique et Technique du Batiment 4 avenue Recteur Poincare, F-75782 PARIS Cedex 16, France

Tel: +33 1 40 50 28 28 Fax: +33 1 45 25 61 51 Web: http:lwww.cstb.frl

0 BSI 2001 sepoo


Germany

BAM BundesansA fur Materialforschung und -PrGfung Unter den Eichen 87, D-12205 Belrin 45 Germany

Tel: +49 30 81 04 12 00 Fax: +49 30 81 21 087 Web: http://trappist.kb.bam-berlin.de/bam.html

Iceland

IBRl Icelandic Building Research Institute Rb-Keldnaholti, IS-112 Reykjavik Iceland

Tel: +354 567 6000 Web: http://wwv.randburg.com/is/icebuild.html

Fax: +354 567 881 1

Italy

KITE lnstituto Centrale per I'lndustrialiuazione e 18 Technologia Edilizia Via Lombardia 49, Frazione Sesta Ulteriano, 20089 San Guiliano Milanese (MI) I-Milano Italy

Tel: +39 2 98 061 Web: http://dns/unife.it/inter-lab/icite.htm

Fax: +39 2 98 28 00 88

Netherlands

TNO Building and Construction Research Lange Kleiweg 5, Rijswijk, PO Box 49 NL-2600 AA Delft, The Netherlands

Tel: +31 15 84 20 00 Web: http:/www.tno.nl/bouw/home.html

Fax: +31 15 84 39 90

Noway

NBI Nowegian Building Research Institute Porskningsveien 3b, PO Box 123 Blindern N-0314 Oslo Noway Tel: +47 22 96 55 00 Web: http:/Ewww.byggforsk.no/english.htm

Fax: +47 22 69 94 38

0 BSI 2001 Sep-00


Portugal

LNEC Laboratorio Nacional de Engenharia Civil Ministerio da Habitacao e Obras Publicas Portugal

Tel: +351 184821 31 Web: http:huww.lnec.pt

Fax: +351 18497660

Spain

ICCET-CSIC lnstiuto de Ciencias de la Construcc/on Eduardo Torroja, Consejo Superior de lnvestigaciones Cientificas I

Serrano Glavache s/n Apartado de Correos 19.002 E-28033 Madrid Spain

Tel: +34 1 302 04 0 4 Web: http:lhuww.csic.es

F a : +34 1 302 07 00

Sweden

SP Swedish National Testing and Research Institute Box 857 S-05115 Boras Sweden

Tel: +46 33 16 50 00 Web: http:/huww spse

Fax: +46 33 13 55 02

United Kingdom

BRE Building Research Establishment UK Garston, Watford WD2 7JR United Kingdom

Tel: +44 923 89 40 40 Web: http:/wvvw.bre.co.uk/

Fax: +44 923 66 40 10

0 BSI 2001 Sep-00


CURRENT EUROiCODES

EUROCODE 1

TABLE 1 i

BASIS OF DESIGN ANa ACTIONS ON STRUCTURES

, ENV 1991-4 ENV 1991 -5

Actions on silos and tank$ Actions induced by craneb and machinery

e

ENV 1992-5 ENV 1992-6

Marine and maritime struhtures Massive structures

EUROCODE 3

ENV 1993-1-1 ENV 1993-1 -2 ENV 1993-1 -3 ENV 1993-1 -4

DESIGN OF STEEL STqCTURES

General rules and rules fqr building Structural fire design Cold formed thin gauge dembers and sheeting The use of stainless steelk

1

ENV 1993-2 ENV 1993-3-1 ENV 1993-3-2 ENV 1993-4 ENV 1993-5 ENV 1993-6 ENV 1993-7 ENV 1993-8

Bridges and plated Structures Towers, masts Chimneys Tanks, silos and pipelined Piling Crane structures Marine and maritime struwures Agricultural structures

BSI International Survey Structural Design Codes - $ \ ' 4

EUROCODE 4

ENV 1994-1-1 ENV 1994-1 -2 ENV 1994-2

DESIGN OF COMPOSITk STEEL & CONCRETE STRUCTURE S General rules and rules fhr building Structural fire design Bridges

I EUROCODE 5

ENV 1995-1 -1 ENV 1995-1-2

I DESIGN OF TIMBER ST~UCTURES 1

General rules and rules fhr building Structural fire design -

ENV 1995-2 Bridges

EUROCODE 6 DESIGN OF MASONRY PTRUCTURES

ENV 1996-1-1 ENV 1996-1-2 ENV 1996-1-3 ENV 1996-1-4 ENV 1996-2 ENV 1996-3 ENV 1996-4

EUROCODE 7

Rules for reinforced and Vnreinforced masonry Structural fire design Detailed rules for lateral Ibading Complex shape sections j Special design aspects I Simplified and simple rulds Short life structures

GEOTECHNICAL D E S I ~ N

I ENV 1998-2 I Bridges ~~

ENV 1998-3 ENV 1998-4

Towers, masts and chimdeys Silos, tanks and pipelines!

I ENV 1998-5 I Foundations, retaining st+ctures and geotechnical aspects I

ENV 1999-1-2 ENV 1999-2

I EUROCODE 9 I DESIGN OF ALUMINIU~ STRUCTURES

Structural fire design Rules for structures susc$ptible to fatigue

I I General rules and rules fdr building ENV 1999-1 -1 1

Sep-00 0 BSI 2001

Q n EUROCODES IN USE IN EC M ~ M B E R STATES

TABLE 2

8 b Q) v)

0 0 0


EUROPE


AUSTRIA National Regulations Each of the 9 Federal Regions:- Burgenland, Kartnen [ Carinthia ], Niederijsterreich [ Lower Austria ], Oberiisterreich [ Upper Austria ], Salzburg [ Salzburg l1 Steierrnark [ Styria II Tiro1 [ Tyrol ]v, Voralhberg [ Vorarlberg] Wien [Vienna ] have their own building code.

2000/572/A Guidelines and regulations for highway construction 5.41 (RVS %.41 and RVS 5.42) 2000/567/A Construction - Road construction on bridges

Standards

Foundations OENORM B 4400: 1978

OENORM B 4401-3: 1985

OENORM B 4412: 1974

OENORM B 4417: 1979

OENORM B 4418: 1981

OENORM B 4422-1: 1992

OENORM B 4433: 1987

Steel structures OENORM B 4300 Teil 1: 1994 OENORM B 4300 Teil2: 1994 OENORM B 4300 Teil3: 1994 OENORM B 4300 Teil5: 1994 OENORM B 4300 Teil7: 1994 OENORM B 4600 Teil2: 1978 OENORM B 4600 Teil3: 1979 OENORM B 4600 Teil4: 1978' OENORM B 4600 Teil7: 1975 OENORM B 4601: 1969 OENORM B 4602: 1975

Aluminium structures none

Concrete structures OENORM B 4200 Teil2 : 1983 OENORM B 4200 Teil3 : 1986 OENORM B 4200 Teil4 : 1984 OENORM B 4200 Teil5 : 1997 OENORM B 4200 Teil6 : 1988

Geotechnical engineering (founqation engineering) - soil classification for civil engineering purposes and meth s for identification of soil-groups Geotechnical engineering (foun 8" ation engineering) exploration by test pits and borings, sampling; recording Earthwork and foundation enginbering - analysis of soil specimen; grain size distribution Geotechnical engineering (foundation engineering); soil investigation; plate loading test Geotechnical engineering (founqation engineering); analysis of soil specimens; proctor test Geotechnical engineering (foun engineering) - Analysis of soil specimen - Geotechnical of base and slope failure

Steel structures - Design and cohstruction - Limit states

Steel structures - Buckling of ba and skeletal structures - Provisions for the joint application of DIN 18800 Part 2 nd OENORM B 4300-1 Steel structures - Buckling of pl E! es - Provisions for the joint application of DIN 18800 Part 3 and OENORM B 4300-1 Steel structures - Fatigue strength

Steel structures - Workmanship

Steel structures; design and caldUlatiOn

Steel structures; calculation of fatigue strength

Steel structures; calculation of swbility, basic cases

Steel structures; specifications for erection and workmanship

Steel construction. supporting Steel constructions - Road

for buildings. Design and construction

Concrete structures; execution principles

Plain concrete structures; design and construction

Reinforced concrete structures; basic rules for design

Precast concrete elements and precast structures for static loadings

Concrete buildings; repair works, reconstruction and strengthening

0 BSI 2001 AUG-01

OENORM B 4200 Teil7 : 1987 OENORM B 4200 Teil8 : 1996 OENORM B 4200 Teil9 : 1996 OENORM B 4200 Teil 10 : 1996 OENORM B 4200 Teil 1 1 : 1991 OENORM B 4700: 1997

Masonry structures none

Timber structures

OENORM B 4101 OENORM B 4102 OENORM B 4002

OENORM B 4100-2: 1997

Composlte structures OENORM B 4502

Concrete reinforcement

Reinforced concrete structures - Design and detailing (I)

Reinforced concrete structures - Design and detailing (11)

Concrete - Production, applicability and verification of quality

Lightweight concrete - Productiqn and quality control

Reinforced concrete structures - EUROCODEsrientated analysis, design and detailing (includes also comgendlum 1997)

Timber structures - Design and qonstruction Timber stmctures - Load bearin structures for rising and similar buildings Timber structures - Timber brid$s Highway Bridges - General ruleg for construction

Composite structures of steel arid concrete; road bridges; design and construction

Acceptable Foreign Standards See Eurocodes

Regulatory Body

Bundesministerium fijr Wirtschaft und Arbeit- Landstr. Hauptstr. 55-57 1031 Wien

tel: +43 1 71 102 260 fax: +43 1 714 35 82/71102 399

b t ' rreichisches lnstitut fiir Bautechnik Sch&kenstraBe 4 A-1010 Wien

Tel: +43 1 533 65 50 Fax: +43 1 533 64 23 e-mail: [email protected]

Deals with approval of products

a


EUROCODES - Austria

EUROCODE 1 ENV 1991-24 ENV 1991-2-7 ENV 1991-3 ENV 1991-5

EUROCODE 2 ENV 1992-1-1 ENV 1992-1-2 ENV 1921-1-3 ENV 1992-14 ENV 1992-1-5 ENV 1992-1-6 ENV 1992-3 ENV 19924

EUROCODE 3 ENV 1993-1-1 ENV 1993-1-2 ENV 1993-2

EUROCODE 4 ENV 1994-1-2

EUROCODE 5 ENV 19951-1 ENV 19951-2

EUROCODE 6 ENV 1996-1-1 ENV 1996-1-2 ENV 1996-1-3 ENV 1996-3

EUROCODE 7 ENV 1997-1 ENV 1997-2 ENV 1997-3

EUROCODE 8 ENV 1998-1-1 ENV 1998-1-2 ENV i ~ ~ a i - 3 ENV 19982 ENV 19984

EUROCODE 9 ENV 1999-1-1 ENV 1999-2

ENV 1991: Basls of design and acafons on structures National Forward published National Forward published National Forward published National Forward published

ENV 1992: Deslgn of concrete strdctures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

Design of steel structures National Forward published National Forward published National Forward published

Design of composite steel and coicrete structures National Forward published

Design of timber structures National Forward published National Forward published

Design of masonry structures National Forward published National Forward published National Forward published National Forward published

Geo-technical design National Forward published National Forward published National Forward published

Design provisions for earthquakes and geotechnlcal aspects National Forward published National Forward published National Forward published National Forward published National Forward published

Design of aluminium structures National Forward published National Forward published

National Application dowment published National Application document published

National Application document published

0 BSI 2001 AUG-01


BELGIUM

National Regulations Law of 20 February 1939 outlines 10 year responsibility of Architect and Fontractor. Royal Ordnance of 19 December 1997 regarding the prevention of fires 6nd explosions Royal Ordnance of 19 August 1998 regarding construction products, imdlementing EC Directive 89/106/EEC Flemish thermal and ventilation regulation of 29 April 1991 Walloon thermal and ventilation regulation of 30 April 1998 Brussels thermal and ventilation regulation of 3 June 1999

Standards Structural Design NBN 803 - 001 : 1988 NBN B 03 - 101 : 1993 NBN B 03 - 104 : 1993 NBN 803 - 105 : 1994 NBN 803-101 : 1993 NBN IS0 3010 : 1993 NBN ISOITR 9492

NBN IS0 3898 : 1992 Loading NBN 803 - 002-1: 1988

NBN B 03-002-2 1988 NBN B 03-102: 1976 NBN B 03-103 : 1976

NBN IS0 4355 : 1993

Earthquake Resistance

Steel structures NBN B 51-001 H : 1977 NBN B 51-002 H 1988 NBN 852-001 : 1995 Concrete structures NBN 815-002 : 1999

Masonry structures NBN 824-301 (STS 22) : 1980 NBN 824-401 (STS 22-3): 1981

General principles on the determinatikn of the safety and serviceability of structures Actions on structures. Road bridges j Actions on structures Railway bridges Actions on structures - Trams Road Bridges Bases for design of structures; seismic actions on structures Thermal Actions Current Eurocodes preferred ' Bases for design of structures; Notakns; General symbols

Wind loads on structures. General. b ind pressure on walls and the overall effects of wind on structures Action of wind on buildings: dynamic /effects of wind on flexible structures Forces on structures. Direct effects f permanent loads due to dead weight Forces on structures. Direct forces. borking loads on buildings Work in hand. 1993 Draft ] Bases for design of structures; Determination of snow loads on roofs Current Eurocode preferred

Current Eurocodes preferred

Steel constructions, elastic calculatio' method Steel constructions, limit state calcul&on method Steel bridges

Concrete - General Current Eurocodes preferred for c+ncrete structures

Design of masonry structures Execution of masonry

I

I

Timber structures STS 04 I STS 31 Design of timber structures

(not Standards but documents produged by MVllMCl Ministere des Communications et de

Current Eurocodes preferred for t i ber structures I'lnfrastructure) I

1" Acceptable Foreign Standards Belgian Construction standards are not mandatory but are considered (tagether with eg Technical Notes from BBRI) as evidence of Good Practice. See also Eurocodes

Regulatory Body

Ministere des communications et de I'infrastructure, rue de la Loi 155. 1040 Bruxelles,

fax 02-287.31.51. t6I 02-287.31.53,

tel: +32 2 665 77 11 fax: +32 2 a53 07 29

Notes

BENOR - Certification mark for Traditional products ATG - lnnovativelnew products

0 BSI 2002 July-2002

BSI International Survey

E UROCODE S - Belgium

Structural Design Codes

a EUROCODE I ENV 1991-1 ENV 1991-2-1 ENV 1991-2-2 ENV 1991-2-3 ENV 1991-24 ENV 1991-2-5 ENV 1991-2-6 ENV 1991-2-7 ENV 1991-3

ENV 1991-5

EUROCODE 2 ENV 1992-1-2 ENV 1992-1-4 ENV 1992-2 ENV 1992-3

ENV 1991-4

ENV 1992-4

EUROCODE 3 ENV 1993-1-1 ENV 1993-1-1/Al ENV 1993-1-1lA2 ENV 1993-1-2 ENV 1993-1-3 ENV 1993-14 ENV 1993-1-5 ENV 1993-1-6 ENV 1993-1-7 ENV 1993-2 ENV 1993-3-1 ENV 1993-3-2 ENV 1993-4-1 ENV 1993-4-2 ENV 1993-4-3 ENV 1993-5

EUROCODE 4 ENV 1994-1-1 ENV 1994-1-2 ENV 1994-2

EUROCODE 5 ENV 1995-1-1 ENV 1995-1-2 ENV 19952

EUROCODE 6 ENV 1996-1-1 ENV 1996-1-2 ENV 1996-1-3

ENV 1996-3 ENV 1996-2


EUROCODE 8 ENV 1998-1-1 ENV 1998-1-2 ENV 1998-1-3 ENV 1998-1-4 ENV 1998-3

ENV 1998-5

EUROCODE 9 ENV 1999-1-1 ENV 1999-1-2

ENV 1998-4

ENV 1999-2

Basis of Design and actlons on s National Forward published 1995 National Forward published 1995 National Forward published 1995 National Forward published 1995 National Forward published 1995 National Forward published 1997 National Forward published 1997 National Forward published 1998 National Forward published 1995 National Forward published 1994 National Forward published 1995

ctures National Application Document published 1999 National Application Document published 1999 National Application Document published 1999 National Application Document published 1999 National Application Document published 1999 National Application Document published 1998

National Application Document published 1998

Design of concrete structures National Forward published 2001 National Forward published 2001 National Forward published 2001 National Forward published 1999 National Forward published 1999


Design of steel structures National Forward published 1992 National Forward published 1995 National Forward published 1998 National Forward published 1995 National Forward published 1997 National Forward published 1996 National Forward published 1998 National Forward published 1999 National Forward published 1999 National Forward published 1998 National Forward published 1998 National Forward published 1998 National Forward published 1999 National Forward published 1999 National Forward published 1999 National Forward published 1998

a National Application Document published

National Application Document published National Application Document published 2000

Design of composite steel and codcrete structures National Forward published 1992 National Forward published 1995 National Forward published 1998

National Application Document published 2001 National Application Document published 1999

Deslgn of Tlmber structures National Forward published 1995 National Forward published 1995 National Forward published 1997

Design of Masonry structures National Forward published 1995 National Forward published 1995 National Forward published 1998 National Forward published 1999 National Forward published 1999

Geo-technical design National Forward published 1995 National Forward published 1999 National Forward published 1999

a National Application Document published 1998 National ADDlication Document Dublished 2000 National Application Document published 2001 National Application Document published 2002

Design provisions for earthquakesiand geo-technlcal aspects National Forward published 1995 National Forward published 1995 National Forward published 1995 National Forward published 1996 National Forward published 1997 National Forward published 1998 National Forward published 1995

Design of alumlnlum structures National Forward published 1998 National Forward published 1998 National Forward published 1998


0 BSI 2002 July-2002


DENMARK

National Regulations Building Regulations BR 95

Standards DS 409 1998 DS 410: 1998

Foundatlons DS 415: 1999

Steel structures DS 412 : 1998

Concrete Structures DS 420: 1983 DS 420E: 1985 DS 420rn1.1: 1993

DS 4201Til3: 1998 DS 481: 1999 DS 482: 1999 Masonry structures DS 414: 1998

DS 4201~112: 1997

Timber Structures DS 413: 1998

DS 483: 1999' Composite structures DS 451: 1984 DS 451E: 1988 Offshore structures DS 449: 1983 DS 449 E: 1984

DS 449-2: 1983 DS 449-2 E: 1984

Code of practice for the safety of stru Code of practice loads for the design These two standards form the of structures.

for the design and construction

Code of Practice for foundation Engin ering This code together with DS 409 and {S 410 forms the basis for the design and construction of foundation and earthworks.

Code of practice for the structural use of steel With DS 409 and DS 410 forms the bisis for steel structures.

Concrete - materials Execution of concrete structures

Code of practice for the structural uselof masonry with DS 409 and DS 41 0 forms the bdsis for masonry structures

Code of practice for the structural use;of timber With DS 409 and DS 410 forms the basis for timber structures Visual strength grading of timber

Code of practice for the design and canstruction of composite structures Covers steel and concrete

Code of practice for the design and struction of pile supported offshore structures With DS 409, DS 410. DS 412, and D 415 forms the basis for design and construction of pile supported offshore steel structures in e Danish sector of the North Sea. Loads, materials, safety, protection against corrosion, nsportation, installation, and inspection. Code of practice for pilesupported o f hore steel structures - Part 2: Annex A-F - Supplementary guide.

Acceptable Foreign Standards

Regulatory Body

See Eurocodes

Danish Ministry of Housing and Building Slotsholmsgade 1 1216 Copenhagen K

Tei: +45 33 92 61 00 Fax: +45 33 92 61 04 www.bm.dk

0 BSI 2000 Sep-00

EUROCODES - Denmark

EUROCODE 1 ENV 1991 -2-2: .i 997 ENV 1991-2-3: 1995 ENV 1991-2-4: 1995 ENV 1991-2-5: 1997 ENV 1991-2-6: 1997 ENV 1991 -2-7: 1998 ENV 1991-3: 1995 ENV 1991-4: 1995

EUROCODE 2 ENV 1992-1 -1 : 1993 ENV 1992-1-2: 1995 ENV 1992-1-3: 1996 ENV 1992-1-4: 1994 ENV 1992-1-5: 1994 ENV 1992-1-6: 1334 ENV 1992-2: 1996 ENV 1992-3: 1999 ENV 1992-4: 1999

EUROCODE 3 ENV 1993-1-1: 1993 ENV 1993-1-2: 1995 ENV 1993-1-3. 1996 ENV 1993-1-4: 1996 ENV 1993-1-5: 1998 ENV 1993-2: 1998 ENV 1993-3-1 : 1999 ENV 1993-3-2: 1998 ENV 1993-5: 1999

EUROCODE 4 ENV 1994-1-1: 1994 ENV 1994-1-2: 1994 ENV 1994-2: 1999

EUROCODE 5 ENV 1995-1-1: 1994 ENV 1995-1-2: 1997 ENV 1995-2: !997

EUROCODE 6 ENV 1996-1-1: 1999 ENV 1996-1-2' 1995 ENV 1996-1-3: 1998 ENV 1996-2: 1999 EhV 1996-3: 1999

EUROCODE 7

EUROCODE 8

ENV 1997-1: 1996

ENV 1998-1 -1 1994 ENV 1998-1-2: 1994 ENV 1998-1-3: 1995 ENV 1998-1-4: 'i996 ENV 1995-2: 1995 ENV 1998-3: 1997 ENV 1998-4: 1998 ENV 1998-5: 1994

EUROCODE 9 ENV 1999-1-1: 1958 ENV 1999-1-2: 1998 ENV 1999-2L 1998

Basis of Design and actions on structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

Design of concrete structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published


Design of steel structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published


Design of composite steel and concrete structures National Forward published National Forward published National Forward published

Design of timber structures National Forward published National Forward published National Forward published

Design of masonry structures National Forward published National Forward published National Forward published National Forward published National Forward published

National Application document + Amendment AC1: 1995


Geo-technical design National Forward published National Application document published

Design provisions for earthquake resihtance of structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

Design of aluminium structures National Forward published National Forward published National Forward published


National Regulations National Building Code of Finland : 1994 Part B The strength of structures B l R.1983 B 2 R. 1990 incl amendments) B 3 R. 1976 B 4 G. 2000 or 2001 B 5 G. 1987 B 6 G. 1989 B 7 G. 1996 B 8 G. 1989 B 9 G 1993 B 10 G. 2000 or 2001

Stand a rd s

Structural safety and loads (Pbrt 5.6 Wind loads) Load bearing structures I

Foundations Concrete structures Structures of lightweight conete blocks Lightweight gauge steel struTres Steel structures Brick structures Structures of concrete blocks Timber structures

FINLAND

Finnish Standards are only cited in Part 84 GBlO G of the Building Code! None are cited in the Regulations. A list of cited standards is available.


Regulatory Body

Apart from Eurocodes local authority can accept the use of foreign standards in separate cases.

Minisby of the Environment Housing and Building Department PO Box 380 FIN40131 Helsinki Finland

Tal: +358 9 19919655 Fax: +358 9 1991 9631 Web: www.vyh.fi

Notes Local authorities carry the main responsibility for land-use planning and b ilding supervision. The Building Act defines the rules for planning and building. The regional v and-use plans drawn up by the Regional Councils guide the master plans and the detailed plans of local authorities.

Adequate documentatlon must be acquired beforehand on the quality and use of structures and building materials and the quality is controlled by initial tests and production tests when needed.

1.

2. 3.

Building regulations may also be found in other legal provisions of the local authority such as public health, fire safety bye-laws, and police orders. The level of structural safety presaibed conforms to European perfohnance levels. Guidelines for concrete structures are based on the CEB Model Code and consequently comply with international levels as to content and ratings.

For approval and certification:- VTT Building Technology PO Box 1801 1 (Betonimlehenkuja 3. Espoo) FIN42044 WT. Finland

Tel: +358 9 456 1 Fax: +358 9 456 7006 www.vtt.fi.rte

E-mail: rts@rts.% Intemet www.rt$.fi

R Regulations are binding G: Guidelines are voluntary and alternative approaches may be applied If requirements set for building are met.

' 0 BSI 2000 Sep-00

E’UROCODES - Finland

EUROCODE 1 ENV 1991-1 ENV 1991 -2-2 ENV 1991 -2-3 ENV 1991 -24 ENV 1991-2-5 ENV 1991 -2-6

EUROCODE 2 ENV 1992-1 -1 ENV 1992-1 -2 ENV 1992-1-3 ENV 1992-1 -4 ENV 1992-1 -5 ENV 1992-1 -6

EUROCODE 3 ENV ? 993- 1 - 1 ENV 1393-1 -2 ENV 1993-1 -3 ENV 1993-1 -4 ENV 1993-! 5 ENV 1993-3-1 ENV 1993-3-2

EUROCODE 4 ENV 1994- 1-1 ENV 1994-1 -2

EIJROCODE 5 ENV ? 395-1 -1 ENV 1995: -2

EUROCODE 6 ENV 1996-1 -1 El:V 1996-1 -2


EUROCODE 8

EuROCODE 9

Basis of Design and actions on structures idational Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

Design of concrete structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

National application Document published National application Document published National application Document published National application Document published

National application Document published National application Document published National application Document published National application Document published National application Document published National application Document published

The above parts of Eurocode 2 are not useld In practice but use is permitted

Design of steel structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

National application Document published National application Document published National application Document published National application Document published

National application Document published I National application Document published

Design of composite steel and concrete StRUCtUreS National Forward published National Forward published

Design of timber structures

National application Document published National application Document published

National application Document published National application Document published

Design of masonry structures National Forward published National application Document published National Forward published The above parts of Eurocode 6 are not used in practice but use Is permitted

National application Document published


National application Document published

Design provisions for earthquake resistance of structures No action taken

Design of aluminium structures No action taken


I I ' , FRANCE

National Regulations Le Code de la Construction et de I'habitation (3 Volumes) There are no 'building regulations' as such but laws, decrees and ministdal orders that are legally binding.

Standards Foundations DTU P 11-211: 1988 DTU 13- 11 DTU P 11-711:1988 DTU 13-12 DTU 13.2-Pll-212 1992 Loading NF P 06-001 1986 NF PO6-004 : 1977 NF P06-005 : 1988 NF P75222. NF EN 12430: 1999

Contract bill for superficial foundationb. contract bill of the spedal clauses.

Rules for the calculation of superficia/ foundations. Deep foundation for building.

Basis for design of structures. Work1 'g loads for buildings Basis for design of structures. PermJent and Service Loads due to Gravity Basis for design of structures Notati ns. General Symbols.

load. Thermal insulating products for buildl, 4 g applicatlons. Determination of behaviour under point

Rules defining the effects on buildings of snow and wind DTU P 06-002. NV 65: 1994 DTU P 06-006, N 84: 1996

REGLES N 84 MODlFlEES 95 Selsmlc effects. NF PO6413,PS 92: 1995

NF P06-014.PS-MI :1995 steel structures DTU P 22-201, DTU 32.1 ~1964

DTU P 22-701, CM 66: 1966

Aluminium structures NF P22-202-1. DTU 32.2: 1993

NF P22-202-2. DTU 32.2: 1993

Concrete structures NF ~18201, DTU 21: 1993 DTU 21 DTU P 18702,BAEL 91

DTU P 18703,BPEL 91

NF P10-210-1. DTU 22.1: 1993

NF Pl0-210-2, DTU 22.1: 1993

NF P18-210. DTU 23.1: 1993 Walls Pl0-202-1. DTU 20.1:

P10-202-2. DTU 20.1: 1994

P i 0-202-3, DTU 20.1 : 1994

1994DTU 20-1

DTU 20-1

DTU 20-1 llmber structures NF P21-203-1, DTU 31.1: 1993 NF P21-203-2. DTU 31.1: 1993 NF P21-204-1, DTU 31.2: 1993

NF P21-204-2. DTU 31.2: 1993

NF P21-2052 DTU 31.3: 1995

Rules NV 65. Rules defining the eff

of application. Design. Construction Action de la neige sur les constructions

on buildings of snow and winds and appendices. Construction of individual houses an "$ of related buildings. 1992 revised. PS-MI 89 Rules. Field

Earthquake resistant construction rul? Earthquake resistant rules Applicable to buildings, called PS 92. Earthquake resistant construction NI&. Earthquake resistant

Contract bill for metal construction wyrk for building : Structural steelwork. Contract bill of the spedal clauses Regulations for the calculation of steel structures (called rules CM 66). (Edition August 1982). 3eme tirage de 1995

1 .

Building works. Metal construction. Aluminium alloys framework. Part 1 : Technical

Building works. Private contracts. Mefal construction. Aluminium Alloys framework. Part 2 : special clauses

specifications

Building works. Execution of concrete works. technical specifications

Technical Rules For The Design of R&hrced Concrete Structures According to the Limit States Method. Rules BAEL 91 Technical Rules for the Design of Prestressed Concrete According to the timlt States Method. Rules BPEL 91. Building works. Exterior cladding using large prefabricated panels of the solid or ribbed slab type or ordinary concrete. Part 1 : Techni I spdcations Building works. Private contracts. Ext rior cladding using large prefabricated panels of the solid or ribbed slab type or ordinary concre 4 e. Part 2 : Special clauses. Building works. In situ formed concrete walls. Technlcal specifications

Execution of work. small masonry unil walls. part 1 : Technical specifications

Execution of work. small masonry unil walls. part 2 : calculation rules and minimum construction provislons. Execution of work: small masonry unit walls. part 3 : guideline to choose the type of facade walls according to the site.

Building works. Timber frameworks a d stalrs. Part 1 : Technical specifications. Building works. Private contracts. Tim ;b er frameworks and stairs. Part 2 : Special clauses. Building works. Timber frame houses and buildings construction. Part 1 : Technical

Building works. Private contracts. Timber frame houses and Buildings construction. Part 2 : special clauses. Timber structures connected with mete1 plate fasteners or gussets. Part 2: Design rules

specifications

0 BSI 2000 sep-oo


Regulatory Body

Notes

Ministre de I’bquipement, des Transports et du Logement (Ministry of Public Works, Transport and Housing)

Le Code de la Construction et de I’habitation available from

Deirection des journaux Officiels 26 rue Desaix 75727 Paris Cedex 15

Tel: +33 I 4b 58 79 79 Fax: +33 1 45 79 17 84

CSTB Centre Scientifique et Technique du Batiment 4 Avenue du Recteur Poincare F-75782 PARIS Cedex 16 http://www.cstb.fr France

Tel: +33 I 40 50 28 28 Fax: +33 1 45 25 61 51


EUROCODES - France

Any Eurocodes with their National application document can be used if reterenced in the contract as an experimental standard.

EUROCODE 1

XP ENV 1991-1,XP PO6-101 ENV 1991-1-1 XP ENV 1991-2-1, XP P 0 6 102-1 XP ENV 1991-2-2, XP P 06 102-2 XP ENV 1991-2-3. XP P 0 6 102-3 NF ENV 1991-2-4. NF P06-102- 4 XP ENV 19913, XP P 06103 FD ENV 1991-4. FD P 06104

EUROCODE 2 ENV 1992-1-1, P 18-711

XP ENV 1992-1-3, XP P la713 XP ENV 1992-1-4. XP P la714 XP ENV iw2-1-5, XP P la715 XP ENV 1992-16, XP P la716 NF ENV 1992-2, NF pia720

ENV 1992-1-2

EUROCODE 3 XP ENV 1993-1-2. XP P 22312 XP ENV 1993-1-3. XP P22-313 PR ENV 1993-1-5. P22-315PR PR ENV 1993-2, P22-3120PR EUROCODE 4 XP ENV 1994-1-2. XP P 22-392 PR ENV 1994-2, XP P94-250-1

EUROCODE 5 XP ENV 19951-1, XP P 21-711 XP ENV 19951-1, XP P21- 71 l /A l EUROCODE 6 ENV 19961-1 XP ENV 19961-2, XP P 10-612

EUROCODE 7

EUROCODE 8 ENV iwai-1 XP ENV iggai-2, XP ~06-031-

XP ENV 1997-1, XP P 94-250-1

2

PR NF ENV 199814. PO6 033PR NF ENV m a 2 , NF ~06-032 ENV 19983 ENV 19984 XP ENV 19985. XP POW35

Basis of design and action on structures National Forward published National Forward published National Forward published

National Forward published


National application document published National application document published National application document publlshed

National application document published

National application document published

National application document expected 2000

National application document published National application document published

National Forward published National Forward published

Design of concrete structures National Forward published National Forward published National Fotward published National Forward published National Forward published National Forward published

Design of steel structures National Forward published

National application document published National application document published National application document published National application document published National application document published National application document published National application document expected 2000

National application document published National application document published National application document expected 2000

I National application document expected 2000 Design of composite steel and aoncrete structures National Forward publlshed

Design of timber structures , National Forward published

Design of masonry structures National Forward published National Forward published

National application document published National application document expected 2000

National application document published Modified National Application Document published

National application document published National application document published

Geo-technical design National Forward published National application document published

Design provisions for earthqua$es and geo-technical aspects National application document expected 2000 National application document expected 2000



National application document expected 2000 National application document expected 2000 National application document expected 2000 National application document expected 2000

0 BSI 2000 Sep-00


GERMANY

National Regulations Each German 'Land' adopts and adapts the Federal Regulations; (MBO - (Irlusterbauiordnung - Model Building Regulations) Federal Building Code Baugesetrbuch - BauGB in the wording of the Actito Amend the Federal Building Code and to Reorder

Federal Regional Planning Act (Raumordnungsgesek (ROG) of 18 Augu 1. t 1997 2081). (Federal Law Gazette I p. 2081,2102) amended Spatial Planning Law [BauROG] as issued on August 18th 1997 (BGBI. I

by Article 3 of the federal law of 15 December 1997 (Federal Law Gazette I p. 2902,2903)

Standards DIN 1055-100: 2000 DRAFT Design Loads DIN 1055 - 1: 1978 DIN 1055 -1: 2000 DRAFT

DIN 1055 - 2: 1976 DIN 1055 - 3 1971 DIN 1055-3: 2000 DRAFT DIN 1055 - 4/Al: 1987 DIN 1055 - 5/Al: 1994 Building In Earthquake Zones DIN 4149: 1981 DIN 414911Al: 1992

Steel Structures DIN 18800-1: 1990 DIN 18800-1IAl: 1996 DIN 18800-2: 1990 DIN 18800-ZAl: 1996 DIN 188003: 1990 DIN 18800-WAl: 1996 DIN 188004: 1990 DIN 18800-7: 1983 Aluminium Structures DIN 4113-1: 1980 DIN 4113-2 : 1993

Basis of design - Part 100: Safety conppt and design rules

Stored Materials, Building Materials a d Structural Members, Dead load and Angle of Friction Action on structures - Part 1: Densitletand weights of building materials, structural elements and stored materials Soil Characteristics; Specific Weight, p g l e of Friction, Cohesion, Angle of Wail Friction. Design loads for buildings; Live loads., Action on structures - Part 3: Self weight and imposed load in building Live loads; Wind loads on structures ubsusceptible to vibration. Live Loads; Snow Load and Ice Load.

Design Loads, Dimensioning. Design nd Construction of Conventional Buildings Design Loads, Analysis and Structura f Design, usual buildings; amendment 1. map showing earthquake areas

Structural steelwork; design and cons ction Steel structures - Part 1: Design and nstruction; Amendment A1 Structural steelwork; analysis of safe against buckling of linear members and frames Steel structures - Stability - Part 2 Bu kling of bars and skeletal structures; Amendment A I Structural steelwork; analysis of safe against budding of plates Steel structures - Stability - Part :Buck ing of plates; Amendment AI Structural steelwork; analysis of safe f against buckling of shells Steel structures; Fabrication, verificati$n of suitability for welding

Aluminium constructions under predominantly static loading; static analysis and structural design Aluminium constructions under predortrinantly static loading; static analysis, structural design and execution of welded construction$

Masonry Structures DIN 1053-1: 1996 DIN 1053-2 : 1996 DIN 1053-3 : 1990 DIN 1053-4 : 1978 DIN 10534: 1999 DRAFT limber Structures DIN 1052-1: 1988 +Al: 1996 DIN 1052-2: 1988+Al: 1996 DIN 1052-3: 1988+A1: 1996 Composite Structures

Masonry - Design and construction Masonry - Masonry strength classes o the basis of suitability tests Masonry - Relnforced masonry; desig and construction Masonry - Buildings of Prefabricated f rickwork Components Masonry - Part 4: Prefabricated masodry compound units

Structural use of timber; design and Structural we of timber; mechanical Structural we of timber; buildings in construction; design and construction

DIN 18800-5 1999 DRAFT DIN 18806-1:


Steel structures - Part 5: Composite spel and concrete structures; design and construction Composite steel and concrete structurb; composite columns

Regulatory Body Bundesministerium fiir Verkehr, Bau- und Wohnungswesen Federal Minisby of Transport, Building and Housing, Krausenstrasse 17-20, 10117 Berlin

Dqutsches lnstitut fir Bautecknik

0 BSI 2001 Aug-Ol

EUROCODES - Germany

EUROCODE 1 DIN V ENV 1991-1 DIN V ENV 1991-2-1 DIN V ENV 1991-2-2 DIN V ENV 1991-2-3 DIN V ENV 1991-24 DIN V ENV 1991-2-5 DIN V ENV 1991-2-6 DIN V ENV 1991-2-7 DIN V ENV 1991-3

DIN V ENV 1991-5

EUROCODE 2 DIN V ENV 1992-1 DIN V ENV 1992-1-2 DIN V ENV 1992-1-3 DIN V ENV 1992-14 DIN V ENV 1992-1-5 DIN V ENV 1992-1-6 DIN V ENV 1992-2

EUROCODE 3 DIN V ENV 1993-1-1

DIN V ENV 1993-1-2 DIN V ENV 1993-1-3

DIN V ENV 1993-1-5

DIN V ENV 1993-1-7

DIN V ENV 19914

DIN V ENV 1993-14

DIN V ENV 1993-1-6

DIN V ENV 1993-2 DIN V ENV 1993-3 DIN V ENV 19934 DIN V ENV 1993-5 DIN V ENV 1993-6

EUROCODE 4 DIN V ENV 1994-1-1

DIN V ENV 1994-1-2 DIN V ENV 1994-2

EUROCODE 5 DIN V ENV 19951-1 DIN V ENV 19951-2 DIN V ENV 19952 EUROCODE 6 DIN V ENV 19961-1 DIN V ENV 19961-2 DIN V ENV 1996-1-3 DIN V EM/ 1996-2 DIN V ENV 1996-3

EUROCODE 7 DIN V ENV 1997-1 DIN V ENV 1997-2 DIN V ENV 1997-3

EUROCODE 8 DIN V ENV 1998-1-1 DIN V ENV 1998-1-2 DIN V ENV 1W1-3 DIN V ENV 1998-14 DIN V ENV 1998-2

DIN V ENV 19984 DIN V ENV 1998-5

EUROCODE 9

DIN v ENV 1998-3

Basis of design and action on StNctUreS

Conversion onto DIN 1055 Conversion onto DIN 1055 Conversion onto DIN 1055 Conversion onto DIN 1055 Conversion onto DIN 1055 Conversion onto DIN 1055 Conversion onto DIN 1055 Conversion onto DIN 1055 National forward published with explications Conversion onto DIN 1055 Conversion onto DIN 1055

National Application Document published 6/95

National Application Document published 6/95 National Application Document published 6/95 National Application Document published 6/95 National Application Document published 6/95 National Application Document in preparation

Design of concrete structures

National forward published ' Technical report published

,

Design of steel structures NAD published as Guideline 103 of the Deutschen Ausschusses Mr Stahlbau NAD published as DIN Technical Report NAD or Guideline published NAD or Guideline published NAD or Guideline published NAD or Guideline published NAD or Guideline published NAD or Guideline published NAD or Guideline published NAD or Guideline publlshed NAD or Guideline published NAD or Guideline published

Design of composite steel and cone+ structures


Design of timber structums


Design of masonry structure National Forward published I Technical report No 60 published National Forward published National Forward published National Forward published National Forward published

NAD published as Guideline 104 of Deutschen Ausschusses Mr Stahlbau Technical report published NAD tor Guideline published

National Application Document published Technical report published NAD or Guideline published

Technical report published Technical report published Technical report published Technical report published

Geo-technical design


National Annex published

Design provisions for earthquake residtance of structures Technical report published Technical report published Technical report published

National Forward published National Forward published National Forward published National Forward published National Forward published

Design of Aluminium structures No action taken


GREECE

National Regulations

General Building Code and Building Construction Regulations (GOK) Dectee N.1577 18 December 1995 Loading of structures Design and constructlon of concrete structures Earthquake design

Concrete technology

Steel Structures - General rules and rules for building Masonry Structures - Rules for reinforced and unreinforcad masonry Pre cast concrete structures

Royal Decree 10/31-12-1945 (FEK 32 A) Ministerial Decision D l lE/O/30123/21 10-1991 (FEK 1068JB), as modified by Ministerial Decision Dllb/12/33-1995 (FEK227 ) Ministerial Decision EDl7a/08/32/FN W30-9-1992 (FEK 613/8), as modified by Ministerial Decision D17a/04/46 FN 27W20-6-1 5 (FEK 534/B) Ministerial Decision ED2a/01/22/8-3-8 i (FEK 22618). as modified by Ministerial Decision

Ministerial Decree D l l b/031/!3-5-199lj (FEK 383/B) for Eurocode 3 Part 1-1

Ministerial Decree D11 b/049/21-8-19$6 (FEK S O W ) for Eurocode 6 Part 1 .l

Ministerial Decree D l 1 b/49/5-7-1= IFEK 383) for Eurocode 2 (Pre cast concrete structures

~14/19iwna3-1997 (FEK 3 1 ~ ~ )

Standards Loading

See regulations Earthquake resistant design

See regulations Steel structures €LOT EN IS0 12944-3: 1998

€LOT EN IS0 12944-5: 1998

ELOT EN IS0 12944-7: 1998

ELOT EN IS0 14713: 1999

Concrete structures ELOT EN 523: 1998 ELOT EN 524-1: 1998

€LOT EN 524-2: 1997

ELOT EN 5244 1997

ELOT EN 524-5: 1997

ELOT EN 990: 1996

€LOT EN 1504-1: 1998

Masonry structures

ELOT EN 1934:1998 ELOT EN 1052-1 : 1998

Tlmber Structures ELOT EN 380: 1994 ELOT EN 383: 1994

ELOT EN 384: 1995 ELOT EN 392: 1995 ELOT EN 408: 1995

ELOT EN 409 1995

ELOT EN 518: 1995 ELOT EN 595: 1995

ELOT EN 596: 1995 ELOT EN 789: 1996

ELOT EN 1 193: 1998

protective paint systems - Part



and aluminium coatings - Guidelines (IS0 14713:1999)

Steel strip sheaths for prestressing te dons - Terminology, requirements. quality control Steel strip sheaths for prestressing teqdons -Test methods - Part 1: Determination of shape and dimensions Steel strip sheaths for prestressing teodons - Test methods - Part 2: Determination of flexural behaviour Steel strip sheaths for prestressing teddons - Test methods - Part 4: Determination of lateral load resistance Steel strip sheaths for prestressing teqdons - Test methods - Part 4: Determination of lateral load resistance Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate Products and systems for the protecti n and repair of concrete structures - Definitions. requirements, quality control and eva t ation of conformity - Part 1: Definitions

Crete with open structure

Methods of test for masonry - Part 1: Qetennination of compressive strength Thermal performance of buildings - Ddtermlnation of thermal resistance by hot box method using heat flow meter - Masonry

Timber structures - Test methods - G neral principles for static load testing Timber structures - Test methods - D~ermination of embedding strength and foundation values for dowel type fasteners Structural timber - Determination of ch racteristic values of mechanical properties and density Glued laminated timber - Shear test ofglue lines Timber structures - Structural timber abd glued laminated timber - Determination of some physical and mechanical properties Timber structures - Test methods - Dqkermination of the yield moment of dowel type fasteners - Nails Structural timber - Grading - Requireients for visual strength grading standards Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour Timber structures - Test methods - Soft body impact test of timber framed walls Timber structures - Test methods - Dqkermination of mechanical properties of wood based panels Timber structures - Structural timber apd glued laminated timber - Determination of shear strength and mechanical propertles pdrpendicutar to the grain

0 BSI 2001 Aug-Ol

Timber structures - Test methods - Performan e of structural floor decking Timber structures - Joints made with mechani I fasteners - General principles for the determination of strength and deformation ch f cteristics Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density

ELOT EN 1195: 1998 ELOT EN 26891

ELOT EN 28970

Acceptable Foreign Standards All existing Eurocodes have been translated into Greek as ELOT ENV 199X-XX etc. When national regulations do not cover the design of certain types of structures, then the corresponding Eurocodes apply ( She regulations) All EN and IS0 documents listed are also acceptable.

Regulatory Body Ministry of Environment and Public Works 17 Amaliados Street GR-115 23 Athens Greece

Tel: +301 643 1461-9 Fax: +301 644 7608

GR - 104-32 Athens

Tel: +30 1 523 3184 Fax: +30 1 523 4312

Tel:+30 1 212i04 37 Fax:+30 1 228 31 35


ICELAND

National Regulation National Building Regulation July 1998

Standards Loading IST 12 : 1989

IST 13 : 1989

Loads for the design of structures ( based on Danish Standard 410 ) Design and calculation of load with redpect to earthquakes.

Foundations IST 15 : 1990 (based on Danish Standard 415 )

Foundation engineering

IST DS 409: 1982 ( adopted as IST 1989) IST 14 : 1989 IST DS 412: 1983 ( adopted as IST 1989)

Safety of structures

Structural use of concrete structural use of steel

IST DS 4; 3 1982 ( adopted as IST 1989) IST DS 419: 1984 ( adopted as IST 1989)

Structural use of timber

Structural use of aluminium a General IST 30 A988

Acceptable foreign standards

Conditions of contract for building andlworks of civil engineering construction

Regulatory Body Mlnisby of lndusby and Commerce Amarhvoli IS 150 Reykjavik. Iceland

Tel: +354 560 9070 Fax: +354 562 1289

Notes Planning Agency Laugavegur 166 150 Reykjavik Iceland Phone: 354-5624100 Fax: -354-5624165 email: [email protected]

Icelandic Building Research Institute (IBRI) Rb-Keidnaholt IS1 12 Reykjavik iceland

Tel: +354 570 7300P Fax: +354 570 731 1

Revlslon of the Building standards above Is due to start during 2000.

- Responsible for Housing

E-mail: [email protected] Website: www.stjr.is/fel

0 BSI 2000 Sep-OO


IRELAND

National Regulations Building Regulations 1997

Standards Foundations BS 8004: 1986 Loading CP 3: Chapter V Part 2: 1972 BS 5080 Part 1 : 1974 (1 982) BS 5080: Part 2: 1986 BS 6399: Part 1 1984 BS 6399: Part 3: 1988

CP 117: Part 1: 1965 BS 449: Part 2: 1969

BS 5950: Part 1 : 1985

BS 5950: Part 2: 1985

BS 5950: Part 3-1: 1990

steel StNctUreS

BS 5950: Part 5: 1987

Aluminium Structures CP 118: 1969 Concrete Structures IS 326: 1988 Masonry Structures IS 3251: 1986 BS 5390: 1976 (1 984) BS 5628 Part 1 : 1978 (1 985) BS 5628: Part 3: 1985

Timber structures SR 11: 1988 BS 5268: Part 2: 1989

Code of practice for foundations

Wind loads Tensile loading AMD 3821 Method for determining resistance to 10 'ding shear Code of practice for dead and imposed loads AMD 4949, AMD 5881, AMD 6031 Code of practice for imposed roof loads,

Structural use of steelwork in building - we ofpractice for design in simple and continuous construction: hot rolled sections Structural use of steelwork in building - Specification for materials, fabrlcation and erection: hot rolled sections AMD 6526 Structural use of steelwork in building - esign in composite construction section - Code of practice for design of floors with profiled P steel sheetlng Structural use of steelwork in building - b d e of practice for design of cold formed sections AMD 5957

The structural use of aluminium

Code of practice for the structural use of concrete

Code of practice for Code of practice for Code of practice for Code of practice for 4974

Structural timber for domestic constructi n Structural use of timber - Part 2: Code olpractice for permissible stress design, materials and workmanship


Regulatory Body Department of the Environment and Local Government The Custom House Dublin 1 Tel: +353 1 888 2000 LoCall: 1890 20 20 21

0 BSI 2000 Sep-00

Notes Technical Guidance documents on the National Building Regulations are available from Government Publications Sale Office, Sun Alliance House, Molesworth Street, Dublin 2 Telephone (01) 66131 11

Building control is run by local authorities - County Councils, County Borough Cwporations, Borough Corporations and Urban District Councils. Ireland also has an independent third party Planning Appeals Board An Bord Pleanala

Approval and testing is carried out by National Standards Authority of Ireland Glasnevin Dublin 9 Republic of Ireland Tel: +353 1 837 0101 Fax: ~ 3 5 3 1 807 38 38

ELJROCODES - Ireland

EUROCODE 1 ENV 1991-1: 1995 ENV 1991 -2-3: 1995 ENV 1991-24: 1995 ENV 1991-2: ,1995 EiW 1991-4: 1905

ELJ;~OCODE 2 ISlEFiV 1992-1-1: 195; XISIENL' 1992-1-2: 1996 XlSlENV 1992-1-3: 1995 ENV 1992-14 ENV 1992-1 -5 ENV 1992-1.6

EUROCODE 3 XlSlENV 1993- :- 1 1995 ENV 1993-1-2

EUROCODE 4 ENV 1994-1-1 ENV 1994-1-2: 1998

EUROCODE 5

EUROCODE 6

EUROCODE 7

EUROCODE 8

ENV 1995-1-1: 1995

ENV 1996-1- 1: 1996

ENV 1997-1 : 1994

ENV 1998-1-1 ENV 198-1-2 ENV 1998-1-3: 1995 ENV 1998-14 1996 ENV 1998-2 ENV 1998-3: 199b ENV 19984: 1998 ENV 1998-5

EUROCODE 9

Basis of design and action on structures No National Forwards published


National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published

National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published

National Application Document published National Application Document published

National Application Document published National Application Document published

National Application Document published



National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published National Application Document published

Design of steel structures

Design of composite steel and concrete structures

Design of Timber structures

Design of masonry structures

Geo-technical deisgn

Design for provision of earthquakes and geo-technical aspects



ITALY National Regulations

Law N. 1086 Sm Novemberl971: Law for the Design and Execution of sbdctures - reinforced and prestressed concrete and metal.

Ministerial Decree 9 Jan 1996 Technical Regulations for the calculation, eltecution, and testing of reinforced and pre-stressed concrete and metal Circolare no. 252 15 Oct 1996 Instructions for the application of "Technid regulations for the calculation, execution, and testing of reinforced and prestressed concrete and metal"

Law N. 64 2@ February 1974: Law for construction with particular reference to Seismic zones

Ministerial Decree 16 Jan 1996 Technical regulations for earthquake resis ent structures Circolare no 69AA GA 10 aprill996 Instructions for the application of" T d chnical regulations for eatthquake resistent structures"

Ministerial Decree 16 Jan 1996 Technical regulations about general criteribs for actions on constructions Circolare no 156/AA GA 4 jull996 Instructions for the application of " Tedhnical regulations about general criterias for actions on constructions"

Other technical regulations about foundations, masonry, pre-casting structures. dams, bridges, a.s.0 are available on request

Standards Loading UN1 9053-1:1987

UN1 9053-2:1987

Earthquake resistance UN1 9742:1990

Steel structures CNR UN1 10011:1988

Aluminium structures UN1 8634:1985 UN1 7876:1978 Concrete structures

UN1 ENV 1993-1-1: 1994

UN1 ENV 1992-1-1: 1993

in situ built. Points position for dimenslonal

situ built. Points position for dimensional and geometrical measurement in assemblies or construction

Ratcheting evaluation for structural cohponents in elevated temperature service with seismic loads

Steel structures. Instructions of design' construction, testing and maintenance Design of steel structures - General ru 1 es and rules for buildings

Aluminium alloy structures. Instruction6 for design and construction Aluminium structures. Selection of alu@inium and aluminium alloys for structures

Design of concrete structures - General rules and NI- for building

Masonry structures None listed

Timber structures SS UN1 U40.06.198.0 Solid timber in structural sizes. Detemiination of some physical and mechanical properties

Acceptable Foreign Standards All Eurocodes are used in Italy as voluntary standards. National forewords are inserted in all the Eurocodes. EM/ 1992-1-1 and ENV 19991-1 are cited in decrees and so have a legal status, with some modifications.

Regulatory Body Ministerio dei Lavori Pubblici Servizio Tecnico Centrale

Tel+39 06 4412 4101 Fax +39 06 4426 7383

Notes Guidelines for Planning, Execution and Testing of structures against earthbuakes (1998) published by Servizio Tecnico Centrale

OBSI 2002 Jan-2002


NETHERLANDS

National Regulations Bouwbesluit (building decree) of 1990, published in Law Gazette 1990, The last amendment was published in Law Gazette 2002,203

Building decree holding technical regulations concerning the construction of construction works and the state of existing construction works (This decree is based on the Housing Law but covers all building and structural work.)

Standards NEN 6700:1991/A1: 1997 Loading NEN 6702:1991/Al: 1997

NEN 2608: Geotechnical design NEN 6740:1991/A1:1997

NEN 6743:1991

NEN 6744:1991

Steel structures NEN 6072:1991/A1:1997 NEN 6770:1997

NEN 6771:2000 NEN 6772:2000 NEN 6773:2000

NEN 6774:2000

NEN 6786:1998 NEN 6788:1995/A1:1999 Aluminium structures NEN 671 0:1991/A1:1997

Concrete structures NEN 6071 :1991/A1:1997 NEN 6720 :1995/Al 3997:

NEN 6723:1995 Masonry structures NEN 6790 :1991/A1 :1997 Timber structures NEN 60731 991/A1:1997 NEN 6760:1997 NEN 6762:1997 NEN 6763:1996 NEN 6765:2001 Roof covering NEN 6707:1991/A1 :1997

Technical principles for building struclures - TGB 1990

TGB 1990 - Loadings and deformations

Glass in building - Resistance agains windloading - Requirements and determination method

Geotechnics - TGB 1990 - Basic requirements and loads

Geotechnics - Calculation methad for bearing capacity of pile foundation - Compression piles

Geotechnics - Calculation methad for shallow foundations

Determination by calculation of the fire resistance of building elements. Steel structures TGB 1990 - Steel structures - Basic rdquirements and basic rules for calculation of predominantly statically loaded

TGB 1990 - Steel structures - TGB 1990 - Steel structures - TGB 1990 - Steel structures - Stabili

predoninantly statically loaded thin ga/uge sections and corrugated sheeting. TGB 1990 - Steel structures - Requiqements for steel qualities for construction steels in relation to brittle fracture of pre-dominantly s tically loaded structures Rules for the design of moveable (mlbile) bridges Design of steel bridges - Basic requirements and simplified rules

and basic rules for calculation and test of

Technical principles for building struclures - TGB 1990; Aluminium structures. Basic requirements and basic rules for calcqrlation of predominantly statically loaded structures

Determination by calculation of the fir resistance of building elements. Concrete structures.

methods Concrete bridges - Structural requirements and calculation methods

TGB 199ONBC 1995 - Regulations I t r concrete Structural requirements and calculation

TGB 1990 Masonry structures - Basic requirements and determination methods

Determination by calculation of the fir+ resistance of building elements. Timber structures TGB-1990 - Timber structures - General principles - Requirements and determination methods Dowel type fasteeners for use in loadibearing timber structures. Glue laminated timber - Product cha$cteristics and determination methods Connections for timber structures - Determination of strenth and stiffness.

Fixed roof coverings. Requirements and determination methods


Regulatory Body Ministerie van Volkhuisvesting Ruimtelijke Ordening en Milieubeheer (VRDM) Ministry of Housing, Spatial Planning, and the Environment

0 BSI 2002 July 2002

BSI international Survey Structural Design Codes

Notes Building decree and Building regulations are enforced by the local authorfties who also deal with permits.

Vereniging van Nederlandse Gemeenten Nassaulaan 12 Postbus 30435 2500 GK Den Haag

tel: 070 - 373 83 93 fax: 070 - 363 56 82

EUROCODES - Netherlands

EUROCODE 1 ENV 1991-1 ENV 1991-2-1 ENV 1991-2-2 ENV 1991-2-3 ENV 1991-2-4 ENV 1991-2-5 ENV 1991-2-7 ENV 1991 -3

ENV 1991-5 ENV 1991-4

EUROCODE 2 ENV 1992-1-1 ENV 1992-1 -2 ENV 1992-1-3 ENV 1992-1-4 ENV 1992-1-5 ENV 1992-1-6 ENV 1992-2

EUROCODE 3 ENV 1993-1-1 ENV 1993-1 -2 ENV 1993-1-1/Al ENV 1993-1-1/A ENV 1993-1 -3

EUROCODE 4

EUROCODE 5

ENV 1994-1-1

ENV 19951-1 ENV 1995-1-2

EUROCODE 6 ENV 1996-1-1 ENV 1996-1-1

EUROCODE 7 ENV 1997-1- ENV 1997-2 ENV 1997-3

EUROCODE 8

EUROCODE 9

ENV 1991 : Basis of design and actions oh structures National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published

National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published

ENV 1992: Design of concrete structures

Design of steel structures National Application Document Published National Application Document Published National Application Document Published National Application Document Published National Application Document Published

Design of composite steel and concrete Qtructures


National Application Document Published

National Application Document Published National Application Document Published

Design of masonry structures National Application Document Published National Application Document Published

Geo-technical design Expected soon Expected soon Expected soon

National Application Document Published National Application Document Published National Application Document Published

Design provisions for earthquakes and ggotechnlcal aspects No action taken


0 BSI 2002 July 2002


NORWAY

National Building Code

StandardslRegulations NS 3481: 1989 Loading NS 3479: 1990 Earthquake resistance

Steel structures NS 470: 1969 NS 3472: 1984 NS 5514: 1978 Aluminium structures NS 3471: 1973 Concrete structures NS 3475: 1975 Masonry structures NS 3475: 1981 limber structures NS 3470: 1989 Composite structures NS 3476: 1988

Technical Regulations under the Building and Planning Act 1997 Regulations concerning requirements br construction works and products for construction works.

Soil investigation and geo-technical d+gn for marine structures

Design of structures - Design loads

Information currently unvaiiable

Rules for the design and fabrication of welded steel structures Design rules - Steel structures Design rules - Cranes and lmng applignces - Steel structures

Design rules -Aluminium structures

Design rules - Concrete structures

Design rules - Masonry structures

Design rules - Timber structures

Composite structures of steel and concrete


Regulatory Body

See Eurocodes

Kommunal-Og Regionaledepartmentet (KRD) Ministry of Local Government and Regional Development

National Office of Building Technology and Administration PO Box 8742 Youngstorget N-0026 Oslo Norway Tel: +47 22 47 56 00 Fax: +47 22 47 56 11

Notes

Website: www.bebbygg.no

Norges Byggstandardiserings~~o~egian Council for Building Standardization Forskningsveien 3 b. P.0.Box 129 Blindem N-0314 OSLO Tel: +47 22 96 59 50 fax +47 22 60 85 70 email: [email protected] URL: www.nbs.no

0 BSI 2000 Sep-00

EUROCODES - Norway

EUROCODE 1

EUROCODE 2

EUROCODE 3

EUROCODE 4

EUROCODE 5

EUROCODE 6

ENV 1992-1-1

ENV 1993-1-1

ENV 1994-1 -1

ENV 1995-1 -1

EUROCODE 7 ENV 1997-1

EUROCODE 8

EUROCODE 9

ENV 1991: Basis of design and actions on structures No action taken ENV 1992: Design of concrete

f&&%\yFo%ard published


Design of composite steel and concrete structures National Forward published

Design of timber structures National Forward published

Design of masonry structures No action taken



Geo-technical design National Forward published National Application Document published

Design provisions for earthquakes and geotechnical aspects No action taken



PORTUGAL

National Regulations RGEU Regulamento das Edifica@es Urbanas The RGEU is divided into three sections:

Documents containing design and execution standards of which )43 are of a general nature, 52 concern the location of

Documents listing the technical standards applicable to specific #pes of construction project. such as water supply, waste

Documents containing the technical standards applicable to builqing projects which are carried out in autonomous regions

buildings and 11 the execution of the project

water systems, gas, electridty and industrial establishments

of Madeira and the Azores

Standards Loading Decreto-Le1235183

Earthquake resistance INCES 5

Decreto-Lei 21 1/88 Concrete structures Decreto-Lei 3494C83


Potuguese Loading Regulations. Stru@ural Safety and loading regulations for buildings and bridges

Portuguese Earthquake Resistant regpiations 1987.

Regulations for steel structures in builbings

Structures of reinforced concrete

steel StNdUreS

See Eurocodes

Regulatory Body Ministry of Public Works. Planning and Regional Administration National Laboratory of Civil Engineering LNEGLaboraMrio Nacional de Engenharia Civil AV. do Brasil, 101, 1799 Usboa Codex Tel: +351 1 848 213. Fax: +351 1 849 7660

Notes New local and imported construction materials or processes need to be approved by the LNEGLaboraMrio Nacional de Engenharia Civil (National Laboratory of Civil Engineering), which undertakes a study and issues a RecWication Document.

AECOPS-Associa@o de Empresas de ConstruHo e Obras Pljbiicas Rua Duque de Palmela, 20, 1250 Lisboa Tel: 1-311 0200. Fax: 1-3554810

0 BSI 2000 sep-oo

EUROCODES - Portugal

Basis of Design and actions on structures

National Forward published (Portugese)

Design of concrete structures National Forward published (Portugese)

Design of steel structures National Forward published (Portugese)

Design of composite steel and concrele structures National Forward published (Portugese)

Design of timber structures National Forward published (Portugese)

ENV 1991-1-1

EUROCODE 2 ENV 1992-1-1: 1993

EUROCODE 3 ENV 1993-1-1: 1993

EUROCODE~ ENV 1994-1-1: 1994

EUROCODE 5 ENV 19951-1: 1994

EUROCODE 6 Design of masonry structures No action taken

EUROCODE 7 Geo-technicai design ENV 1997-1: 1996 National Forward published (Portugese)

EUROCODE 8

EUROCODE 9

Design provisions for earthquake resi$tance of structures No action taken



SPAIN

National Regulations Bullding Act Act W l999 of 5" November 1999' Real Decreto 1650/1977 dei Ministerio de ia Viiienda NBEAE 88 Actions on structures - Decreto 195/1963, Real Decreto 137Uf1988

Ch. 1: General Ch 2: Gravitational Forces Ch 3: Superioads of Use Ch 4: Snow supedoads Ch 5: Wind Action Ch 6 Thermic and Rheoiogic Action Ch 7: Earthquake Actions Ch 8: Pressures on Cementation soil Ch 9: Groundthrusts Plus: Building Engineering standards, ECG: Gravitational Forces, ECR! Retraction Forces, ECS: Seismic Forces. ECT Thermal Forces, ECV Wind forces

NBE-EA95 Steel structures in construction - Real Decreto 1829/1995 NBE-FL-90 Resistant brick walls - Real Decreto 1723/1990 NBE-QB-90 Impermeable bitumen covets - Real Decreto 1572/1990 NBE-CA-88 Acoustic requirements in buildings - Real Decreto 190911981 NBE-CPI-96 Protection against fire - Real Decreto 2177/1996 NBE-CT-79 Thermal conditions in buildings - Real Decreto 2429/1979 NCSE-94 Seismic resistance Construction Standard: General and building - Real Decreto 2543/1994 EHE Instruction for structural concrete - Reinforced and prestr6ssed EF-96 Instructions for design and execution of unidirectional castings of reinforced and prestressed concrete.

Standards UNE 76207: 1991 Loadlng

Earthquake resistance

Steel structures UNE 76101: 1990 Concrete structures

limber structures UNE-EN 26891: 1992

UNE-EN 28970 1992

UNE-EN 380: 1998 UNE-EN 338: 1995

Bases for the design of structures - NQtations - General symbols

See regulations

See regulations

Construction of steel structures

See regulations

Timber structures - Joints made with echanical fasteners. General principles for the determination of strength and deform tion characteristics (IS0 6891) Timber structures. Testing of joints m de with mechanical fasteners - requirements for wood

Timber structures -test methods - Geheral prindpies for static load testing Structural timber - Strength classes

density (IS0 8970) 1 Acceptable Foreign Standards See Eurocodes

Regulatory Body Ministerio de la Vivienda

Ministerio de Obras Plibllcas y Urbanismo

Notes 'This law authorises the government to approve, by means of a Royal D Technical Building Code which establishes the requirements to be met by buildings in relation to the basic requirements. Until such approval the Basic Building Regulations (NBE (Normas BBsicas de la Edi 4 caci6n) shall be used to satisfy such basic requirements.

ee within two years of this act coming Into force. a

0 BSI 2000 Sep-00

EUROCODES - Spain

EUROCODE 1 ENV 1991-1-1 ENV 1991-2-2 ENV 1991 -2-3 ENV 1991-2-4 ENV 1991 -2-5 ENV 1991-2-6 ENV 1991-3 ENV 19914

EUROCODE 2 ENV 1992-1-1 ENV 1992-1 -2 ENV 1921-1-3 ENV 1992-1-4 ENV 1992-1-5 ENV 1992-1 -6 ENV 1992-2

EUROCOOE 3

EUROCODE 4

ENV 1993-1-1

ENV 1994-1-1 ENV 1994-1-2

EUROCODE 5 ENV 1935-1 -1 ENV 1095-1 -2

EUROCODE 6 ENV 1996-1-1

EUROCODE 7

EUROCODE 8

ENV 1997-1

ENV 1998-1-1 ENV 1998-1 -2 ENV 1998-2 ENV 1998-5

EUROCODE 9

ENV 1991: Basis of design and actions on structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published ENV 1992: Design of concrete

6!!!%&%%ard published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

National Application document published National Application document published



Design of composite steel and concrete structures National Forward published National Forward published


Design of masonry structures National Forward published



Geo-technical design National Forward published , Natiolral Application document published

Design provisions for earthquakes and geotechnical aspects National Forward published National Forward published National Forward published National Forward published



, , ...

National Regulations Building Regulations, BBR Of the Swedish Board of Housing, Building an Planning (BFS 1993:57 with amendments to BFS 1998:38) contains mandatory provisions and general recommendations p rsuant to the planning and Building Act (1987:10), PBL, the Planning and Building Decree (1987:383), the Act on Technical requir I ments for Construction Works etc (1994:847) and the Decree on technical requirements for Construction Works etc (1994:12151.

Design Regulations, BKR Of the Swedish Board of Housing, Building and/planning (BFS 1993:58 with amendments'to BFS 1998:39) pursuant to the Planning and Building Act (1987:10), PBL, the A@ on Technical requirements for Construction Works etc (1994:847) and the Decree on technical Requirements for Construction bhrks etc (1994:1215)

Section 2: General Regulations for loadbearing structures Section 3: Actions Section 5: Timber structures Section 6: Masonry structures Section 7: Concrete structures Section 8: Steel structures Section 9: Aluminium structures Section 10: Resistance in case of fire

a Standards There are no mandatory standards in Sweden.


Regulatory Body Boverket Building and Housing Administration Physical address - Drottninggatan 18 Postal adress: Box 534 371 23 KARLSKRONA Tel: +46 - 45535 30 00

www. boverketse fax:+46 - 45535 31 00

Notes Planning permits from Local authorities

Sweden has a non-mandatory system for technical approvals of building products handled by ackredited approval bodies. E.g: SITAC Swedish Institute for Technical Approval Tel: +46 455 20600 httpYhww.sitac.se

BKR and BBR are available in English at the web-site www.boverket.se or from [email protected]

0 BSI 2002 July 2002


EUROCODES - Sweden

EUROCODE 1 ENV 1991-1-1 ENV 1991-2-2 ENV 1991-2-3 ENV 1991-2-5 ENV 1991-2-7 ENV 1991-3 ENV 1991-4

EUROCODE 2 ENV 1992-1-1 ENV 1992-1 -2 ENV 1922-1-3 ENV 1992-1-4 ENV 1992-1-5 ENV 1992-1 -6 ENV 1992-2 ENV 1992-4

EUROCODE 3 ENV 1993-1-1 ENV 1993-1-2 ENV 1993-1-3 ENV 1993-1-4 ENV 1993-1-5 ENV 1993-2 ENV 1993-3-2 ENV 199343

EUROCODE 4 ENV 1994-1 -1 ENV 1994-1 -2

EUROCODE 5 ENV 19951-1 ENV 19951-2 ENV 19952

EUROCODE 6 ENV 1996-1-1 ENV 1996-1-3


EUROCODE 8

EUROCODE 9 ENV 19941 -1 ENV 1999-2

ENV 1991 : Basis of design and actiOns on structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published ENV 1992: Design of concrete structures

National Forward published National Forward published National Forward published National Forward published

National Application document published National Application document published National Application document published


National Application document published National Application document published National Application document published National Application document published National Application document published




Design of steel structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

Design of composite steel and concpte structures National Forward published National Forward published

Design of timber structures National Forward published National Forward published National Forward published



National Application document published National Application document published National Application document published National Application document published National Application document published National Application document published National Application document published





Design provisions for earthquakes dnd geotechnicai aspects No action taken

Design of aluminium structures National Forward published National Forward published

0 BSI 2002 July 2002

SWITZERLAND

National Regulations There is no single Building Code in Swikerland but many regulations. The Central Government makes no prescriptions to buildings not owned by itself. The 25 Cantons co-ordinate the Regulations with the ;local Municipality.

Standards Loading SIA 160: 1989 SN 505160 Actions on structures Steel structures SIA 161: 1990 SN 555161

Concrete structures SIA 162: 1993 SN 562162

Masonry structures SIA 177: 1995 limber Structures SIA 164: 1992 SN 553164 SIA 164-1: 1986 Composite structures SIA 162/6: 1999

SIA 161/1: 1990 SN 555161-1

SA1 162-1 : 1989

a

Steel structures Steel structures - Quality managemedt, operation. testing, materials

Concrete structures Concrete structures - Materials testing

Masonry structures

Timber structures Timber materials

Steel reinforced concrete

Acceptable Foreign Standards See Eurocodes Swiss Building standards are not mandatory. Engineers can use any Desi n standards if agreed with the owner of the building. The owner on the other hand has to make sure, that his work is safe to users tnd the public and has therefore an interest that standards are used. This is normally documented In the contract agreements. If any gispute arises the law tends to accept standard as "state of the art". So its good practice to use standards but it is not mandatory.

Regulatory Body

Notes

There is no single Regulatory Body in Swikerland.

Building Standards are taken care of by Swiss Society of Engineers and Architects Selnaustrasse 16 Ch 8039 ZOrich

Tel: +41 1 283 15 15 Fax: +41 1 201 63 35 www.sia.ch a

a 0 BSI 2000 Sep-00

EUROCOLJES - Switzerland

EUROCODE 1 ENV 1991-1-1 ENV 1991-2-2 ENV 1991 -2-3 ENV 1991-2-4 ENV 1991 -2-5 ENV 1991-3 ENV 1991-4

EUROCODE 2 ENV 1992-1-1 ENV 1992-1-2 ENV 1921-1-3 ENV 1992-1-4 ENV 1992-1 -5 ENV 1992-1-6 ENV 1392-2

EUROCODE 3 ENV 1993-1-1 ENV 1993-1-2 ENV 1993-1-3 ENV 1993-3-2

EUROCODE 4 ENV 1994-1-1 ENV 1994-1 -2

EUROCODE 5 ENV 1995-1-1 ENV 1995-1-2

EUROCODE 6 ENV 1996-1-1 ENV 1996-1-3

EUROCODE 7 ENV 1997-1

EUROCODE 8 ENV 1991-1-1 ENV 1998-1 -2 ENV 1998-1 -3 ENV 1998-2

EUROCODE 9

ENV 1991 : Basis of design and actions on structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published ENV 1992: Design of concrete structures National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published National Forward published

Design of steel structures National Forward published National Forward published National Forward published National Forward published

Design of composite steel and concreie structures National Forward published National Forward published



National Application document published National Application document published National Application document published National Application document published







Geo-technical design National Forward published National Application document published

Design provisions for earthquakes and geotechnical aspects National Forward published National Forward published National Forward published National Forward published


National Application document published National Application document published National Application document published National Application document published

BSI International Suwey Structural Design Codes

UNITED KINGDOM

National Regulations The Building Regulations: 2000 plus amendments Approved Document A - Structure

Standards BS 8004: 1986 Loading BS 6399-1 : 1996 BS 6399-2: 1997 BS 6399-3: 1988 CP3CHVPart2:1972

Code of practice for foundations

Loading for buiidings. Code of practi for dead and imposed loads

(proposed for declaration of obsolescence)

Earthquake resistance None

Steel structures BS 449-2: 1969 BS 5950-1: 2000

BS 5950-2: 1992

BS 5950-3: Section 3.1: 1990 BS 5950: Part 4: 1994

BS 5950: Part 5: 1 998 BS 5950 Part 6: 1995

BS 5950: Part 7 1992

BS 5950:Part 8:1990 BS 5950:Part 9:1994 Aluminium structures BS 8118:Part 1:1991 BS 8118:Part 2:1991

CP 118:1969 Concrete structures BS 8110-1: 1997 BS 81 10-2: 1985 BS 8110-3 1985

Masonry structures BS 5390: 1 976 BS 5628:Part 1:1992 BS 5628:Part 22000 BS 5628Part 3~1985 Timber structures BS 5268-2: 1996

BS 52683:1998 BS 52684. I : 1 978

BS 5268-4.2:1990

BS 5266-5: I 989 BS 5268-6.1:1996

BS 5268-7.1 : 1 989

BS 5268-7.2:1989

BS 526&7.3:1989

BS 5268-7.43989 BS 5268-751990

Specification for the use of Structural use of steelwork in construction: hot rolled sections. Structural use of steelwork in building.; Specification for materials, fabrication and erection: hot- rolled sections Structural use of Steelwork in building.' Design in composite construction.

proflled steel sheeting. Structural use of steelwork in buildlng.'Code of practice for design of cold formed sections. Structural use of steelwork in buildingjCode of practice for design of light gauge profiled steel sheeting. Specification for materials and workmenship: cold formed sections. Structural use of steelwork in building. Structural use of steelwork in building.'Code of practice for fire resistant design.

tee1 in building. Metric units Code of practice for design in simple and continuous

Structural use of steelwork in building. I Code of practice for design of composite slabs with

Structural use of steelwork in building.,Code I of practice for stressed skin design.

Structural use of aluminium. Code of dractice for design. Structural use of aluminium

Structural use of concrete - Structural use of concrete - Structural use of concrete - and rectangular columns

reinforced beams

Code of practice for stone masonry - Code of practice for use of masonry - Code of practice for use of masonry - Code of practice for use of masonry -

use of unreinforced masonry. use of reinforced and prestressed masonry and components, design and workmanship.

Structural use of timber. Code of pracdce for permissible stress design, materials and workmanship Structural use of timber. Structural we of timber. Fire fire resistance of timber members Structural use of timber. Fire resistancb of timber structures. Recommendations for calculating fire resistance of timber Structural use of Umber. Structural use of Umber. storeys Structural use of timber. Recommend4ons for the calculation basis for span tables. Domestic floor joists Structural use of timber. Recomrnendaltions for the calculation basis for span tables. Joists for flat roofs Structural use of timber. Recommendflons for the calculation basis for span tables. Ceiling joists structural use of timber. Ceiling binde Structural use of timber. Recommend$ons for the calculation basis for span tables. Domestic rafters

trussed rafter roofs timber structures. Recommendations for calculating

0 BSI 2001 Aug-Ol

BS 5268-7.6:1990

BS 5268-7.7:1990

Structural use of timber. Recommendation% For the calculation basis for span tables. Purlins supporting rafters Structural use of timber. Recommendations f i r the calculation basis for span tables. Purlins supporting sheeting or decking


Regulatory Body Department of Transport, Local Government and the Regions Eland House, Bressenden Place, London, SWlE 5DU.

Tel: 020 7944 3000 http:/b~.construction.dtIr.gov.uk/bregs/index. htm

Notes Building control in the UK is run by Local Authorities who enforce the regulations and give planning permission.

The current building regulations are mandatory however there are plans to relax dtructural design to allow for innovative design. These plans are in the early discussion phase.

European Technicai Approval notified bodies in the UK for construction products

British Board of Agrement (BBA) PO Box 195, B::cknalls Lane, Garston, Watford, WD2 7NG

Tel: 01 923 665306 Fax: 01923 665301 E-mail: [email protected] Website: http://wbw.bbacerts.co.uk

WMLAS Limited St Poter's House, 6-8 High Street, Iver. Buckinghamshire, SLO 9NG

Tel: 01 753 737744 Fax: 01753 792321 E-mail: [email protected]


EUROCODES - UK EUROCODE 1 DD ENV 1991-1 DD ENV 1991-2-1 DD ENV 1991-2-2 DD ENV 1991-2-3 DD ENV 1991-2-4 DD ENV 1991-3

EUROCODE 2 DD ENV 1992-1-1 DD ENV 1992-1-2 DD ENV 1921-1-3 DD ENV 1992-1-4 DD ENV 1992-1-5 DD ENV 1992-4

EUROCODE 3 DD ENV 1993-1-1 DD ENV 1993-1-2

EUROCODE4 DD ENV 1994-1-1

EUROCODE 5 DD ENV 19951-1 DD ENV 19951-2

EUROCODE 6 DD ENV 19961-1 DD ENV 1996-1-2

EUROCODE 7

EUROCODE 8

DD ENV 1997-1

DD ENV 1998-1-1 DD ENV 1998-1-2 DD ENV 1998-1-3 DD ENV i w a i - 4 DD ENV 1998-2

EUROCODE 9

DD ENV 1991: Basis of design and actions on structures National Application document published National Application document published National Application document published


National Application document published National Application document published National Application document published National Application document published National Application document published National Application document published


DD ENV 1992: Design of concdte structures

Design of steel structures National Application document published National Application document published

Design of composite steel and 4oncrete structures



National Application document published National Application dowment published



Design of masonry structures

Geo-technical design

Design provisions for earthquab and geotechnical aspects National Forward publlshed National Forward published National Forward published National Forward published National Fomard published

Design of aluminium structures No actlon taken

0 BSI 2001 Aug-Ol

BSI International Survey Structural Design Codes I

REST OF THE WORLD


ARGENTINA

National Regulations No national Building Regulation exists. CIRSOC Codes are mandatory r every national public work. Each Province or municpaiity has the power to make them mandatorywithin their jurisdiction through 4 eir building code. The Building code and Town Planning Code from the City of Buenos Arik is the most used code and is followed by many other cities.

The following are structural design rules produced for CIRSOC

REGLAMENTO CIRSOC 101


RECOMENDACION CIRSOC 102-1 REGLAMENTO INPRES- CIRSOC 103


RECOMENDACION CIRSOC 105 RECOMENDACION CIRSOC 106

RECOMENDACION CIRSOC 107 REGLAMENTO CIRSOC 201

RECOMENDACION CIRSOC 201-1 REGLAMENTO ClRSOC 202


DlSPOSlClON URSOC 251


RECOMENDACION ClRSOC 301-2


RECOMENDACION CIRSOC 302 - 1

RECOMENDACION ClRSOC 303 REGLAMENTO CIRSOC 304


Standards

Loading IRAM 1 1602

Earthquake resistance See above

Steel structures See above

Structural loading of buildings Cargas y sobrecargas gravitatorias era el dlculo de estructuras de edificios - Edici6n julio 1982 Wind loading Acd6n del viento sobre las construcdiones - Edici6n Diciembre 1984 - (incluye separata con FE DE ERRATAS 1994) Actions on structures - Wind loading Acd6n dinemica del viento sobre iaslconstrucdones - Edicidn Julio 1982 Seismic constructions Nonnas Argentinas para las Constru*ones sismorresistentes - Edici6n Noviembre 1983 Edicibn Agosto 1991 Ice and snow loading Accidn de la nieve y del hieio sobre Igs construcciones - Edici6n Julio 1982 - Actualizaci6n 84 (Fe de erratas) Combination loading Superposicidn de acdones combi in+%%^ de estados de carga) - Edici6n Julio 1982 Dimensioning of safety co-eflicients ~

Dimensionamiento del coeficiente da seguridad - Edici6n Julio 1982 - Actuaiizaci6n 34 (Fe de erratas) Atmospheric thenai loading Acci6n tBrmica climdtica sobre las Calculation and execution of steel re' forced concrete Proyecto dlculo y ejecucibn de es 3 cturas de hormigdn annado y pretensado - Edicidn Julio 1982 - Actualizaci6n 1984 Steel for reinforced concrete with Bs I= 500 MN/m3 y Bs = WO MN/m 3 Acero para honnigdn annado con B i = 500 MN/m3 y Bs = 600 MN/m 3 - Edid6n Julio 1932 Non-reinforced ocncrete for compact structures - Dimensioning, manufacture and quality Honlg6n liviano de estructura comphcta. Dimensionamiento. elaboraci6n y control - Edicidn Matzo 1985 Partially prestressed concrete Honnig6n pretensado parcial - Ediciqn Enero 1986 Steel for structures of reinfoced conclete - test methods and acceptability criteria Acero para estructuras de honnig6n brmado. MBtodos de ensayo y condidones de aceptaci6n - Edid6n Julio 1982 Steel structures for building - Design calculation, manufacture Proyecto. dlculo y ejecuci6n de es4cturas de acero para edlficios - Edicidn Julio 1982 - Actualtzaci6n 1984

nstrucciones - Edici6n Julio 1982

Light steel structures Estructuras livianas de acero - EdlciUn Agosto 1991 Welded steel structures Estructuras de acero soidadas - Edic)bn Diciem bre 1992 Steel structures for antenna Estructuras de acero para antenas - Edidbn Diciembre 1991.

Actions of snow on buildings

0 BSI 2001 Aug-Ol

Aluminium structures

Concrete structures IRAM 11705 IRAM 11706

Reinforced and prestressed concrete silos - Design for loading Reinforced and pre-stressed concrete silos - Conditions and requirements for construction


Timber structures None

Acceptable Foreign Standards Generally foreign codes are not acceptable in Argentina. Any foreign company involved in design projects. which uses their own niational codes must verify them with CIRSOC.

Regulatory Body INSTITUTO NACIONAL DE TECNOLOGIA INDUSTRIAL CIRSOC Centro Argentino de Investigacibn de 10s Reglamentos Naciondles de Seguridad para las Obras Balcarce 186 1" piso Of. 138, (1064) Capital Federal Argentina

Ing. Marta Parmlgiani

Tel: +54 11 4349852OlW24 E-mail: [email protected]


National Regulations SNIP 11-7-81 SNIP 22-01-96 SNIP 2.01.15-90

SNIP 2.03.04.84

SNIP 111-24-75

Construction in seismic areas Geophysics of dangerous natural influences Engineering protection of territories; buildinga, structures from dangerous geological processes. Basic design rules. Design manual for concrete and reinforced cdncrete structures for the use oat high and extremely high temperatures Industrial furnaces and stacks

Standards Loading

SNIP 2.02.05-87 SNIP 2.06.04-82


SNIP 2.01.07-85

SNIP 2.03.01-87

Loads and efects Foundations for machinery producing impact oad

Load bearing structures and unclosures Loads and effects arising on hydraulic structu I es from Seaway, Ice and Vesseis

'

SNPA 11-2.02-94 Construction in seismic areas

Steel structures SNIP 11-23-81 GOST 23682-79

GOST 2404594 GOST 26047-83 SNIP 111 1875 Aluminium structures GOST 22233-93 GOST 24767-81

SNIP 2.03.0695 Concrete structures GOST 1301 5.0-83 SNIP 2.03.01-84 SNIP 2.03.02-86 SNIP 2.03.04-84

SNIP 2.03.0485

Steel structures Steel stepped columns for buildings with general purpose travelling electric cranes having load- carrying capacity up to 50 1. Specifications

Metal structures

for building. Specifications

Extruded profiles of aluminium Cold bent profiles of aluminium Specifications Aluminium structure designs

Precast concrete structures and members Concrete and reinforced concrete structures ~

Dense silicate plain concrete and reinforced Design manual for concrete and reinforced q c r e t e structures for the use at high and extremely high temperatures Asbestos -cement structures

ncrete structures

Masonry structures SNPA IV-13.01-96 GOST 24992-81 SNIP 11-22-81 Masonry and reinforced masonry structures '

limber structures GOST 4981-87 Wooden joists SNIP 11-25-80 Wood structures

With the exception of a few areas covered by international conventions foreign anb international standards are not recognized and can not be officially used in Armenia unless adopted by the appropriate authority. At present Eurocodes are not acceptable in Armenia.

Masonry and reinforced masonry structures Masonry structures. Method of estimating bonbing strength in masonry

0


Regulatory Body Ministry of Urban Development Government House 3, Republic Square Yerevan 375010 Tel: +3741 580803. Fax:+ 3742523200

SNIP documents are building regulations and standards from the former USSR. GbST- standards are from the former USSR. They continue to be used in Armenia both with and without changes.

Notes

July 2002 0 BSI 2002


AUSTRALIA

I

National Regulations Building Code of Australia 1996

Volume 1: Commercial Buildings Volume 2: Housing Provisions

Standards

Loading SAA Loading Code Minimum design loads on structures AS 1170.1-1989 AS 1170.2-1989 Wind loads AS 1170.3-1990 AS 1 170.4-1 993

(In SAA Rul ST/l) Dead and live load? and load combinations

Snow loads (indudes supplement) Earthquake loads (indudes supplemenp)


Steel structures SAA Steel Structures Code AS 3990: 1993 AS 4100 : 1998 ASlNZS 4600:1996 Cold-formed steel structures (inlcudes upplement) HB 481 999

Mechanical equipment - Steelwork Steel structures (includes supplement) I

Steel structures design handbook for glneral advice.

Aluminium structures SAA Alumlnlum Structures Code ASMZS 1664.1:1997 ASMZS 1664.2:1997

Concrete structures Concrete Structures AS 3600: 1994 Concrete structures Supplement to AS 3600: 1994

Aluminium structures-limit state (includes supplement) Aluminium structures-Allowable esign (includes supplement)

Concrete structures - Commentary

Masonry structures Masonry Structures AS 3700: 1988 Masonry in buildings

llmber structures SAA limber Structures Code AS 1720.1-1997 AS 1720.2-1990 AS 1684-1992

Timber structures - Design methods limber structures - Tlmber properties National Timber Framing Code

Others SAA Composite Construction Code Composite structures

Design and installation of sheet roof a Methods of testing sheet roof and wall c adding-Introduction. list of methods and general AS 4040.0-1992 requirements

AS 4040.1-1992 Methods of testing sheet roof and wall @adding-Resistance to concenlrated loads AS 4040.2-1992 Methods of testing sheet roof and wall hladding-Resistance to wind pressures for noncyclone

regions SAA Code for Flxed platforms, Walkways, Stairways and Ladders AS 1657-1 992 Fixed plaffonns, walkways, stairways ahd ladders - Design, construction and installation Accesslblilty AS 1428.1-1 998 Design for access and mobility-General requirements for access - Building#

wall cladding-Metal AS 1 562.1-1 992

Acceptable Foreign Standards BCA is a Performance based Code which is updated every 6 months.

0 BSI 2001 Aug-Ol

Regulatory Body Australia:. Building Codes Board GPO Box 9839 Canberra ACT 2601 Australia

Tel: +11 612 6213 7842 Fax: +11 612 6213 7287 www.abcb.gov.au

The Board was established by means of an inter-government agreement signed by the Commonwealth, State and Territory Ministers responsible for building regulatory matters on 1 March, 1994. The ABCB is responsible for developing Building Code. Local Councils enforce the Code under Local Government Acts.

Notes Australian Building System Appraisal Council Administration Secretariat CIC MBA VIC East Melbourne Vic 3000 Australia

Tel: +11 61 3 9411 4511 Fax: +11 61 3 941 1 4592

Appraises building products and offers technical opinions regarding compliance with BCA.

The Building Code of Australia 1996 and BCA Standards are available ftom Standards Australia PO Box 1055, Strathfield, NSW 2135 Tel: +61 2 9746 4777 Fax: +61 .i 900 654 94s Email: [email protected]


AZERBAIJAN

Standards Loading SNIP 2.06.04-82 SNIP 2.01.07-85

GOST 27751-88 SN 528-80

Earthquake resistance SN 429-71

Steel structures SNIP 11-7-81

SNIP 11-23-81 SNIP 2.04.12-86

SNIP 111-18-75 SN 527 -80

Concrete structures SNIP 2.03.01-84 SNIP 2.03.02-86

SN 277-80 SNIP 2.06.0685

SN 52580 SN 529-80 SNIP 2.03.04.84

SNIP 2.06.08-87 Masonry structures SNIP 111-2475 SNIP 11-22-81

RSN 14-90 RSN 20-85 RSNl7-81 RSN 18 -83

SNIP 3.03.01 .-87

limber structures SNIP 11-2580

Loads and effects arising on hydraulicstructures from Seaway, Ice, and Vessels Loads and effects Measurement units for use in the condtruction Reliability of the constructions and the!foundations. Principle rules of the calculations

Direction for disposition of building objkcts and restriction for building floors in earthquake areas Construction in seismic areas

Steel structures Strength analysis of steel pipelines Instruction for designing technological :steel pipelines Metal structures

Concrete and reinforced concrete stru ures

Concrete and reinforced dams Instruction for production of light concrkte Instruction for production of polymerisi g concrete Instruction for production of solid sili J e concret Design manual for concrete and reinf&ced concrete structures for the use oat high and extremely high temperatures Concrete and reinforced concrete strubtures for hydraulic facilities

Dense silicate plain concrete and rein it rced concrete structures

Industrial furnaces and stacks Masonry and reinforced masonry

dimension bricks from limestone usin$ composition KH-3

Wood structures


Regulatory Body

None There is discussion towards making Eurocodes and US standards acceptdble in the future

Gosstroi AzR 85 Salyn Askarova street, 370002 Baku, Azerbaijan Republic, Tel: + 99412 95 94 51 F a : + 99412 95 10 60/+ 99412 957412

Notes

SNIP Russian regulations GOST Russian Standards RSN National regulations

0 BSI 2002 July 2002


BAHAMAS National Regulations

Buildings Regulation Act, 1971 Bahamas Building Code - Part V Engineering and Construction Requirewen& Chapter 20 Live and Dead Loads Chapter 21 Excavations, Footings and Foundations Chapter 22 Reinforced Concrete Chapter 23 Steel and Iron Chapter 24 Wood Chapter 25 Aluminium Chapter 26 Reinforced Gypsum Concrete Chapter 27 Masonry

Standards See Building Code

Acceptable Foreign Standards The Bahamas has adopted various standards from the United States and Canada to supplement the Bahamas Building Code. but not to supercede the specific requirements in its own code.

Regulatory Body The Ministry of Transport 8 Works John F Kennedy Drive PO Box N 8156 Nassau Bahamas

Tel: +242 322 4830 Fax: +242 326 7907 m a i l : [email protected]

0 BSI 2000 Sep-00


BELARUS

National Regulations 1.01.01-97 System of technical normalization and Standardization in conitructlon. National complex of normative technical documents. Basic principles

Building regulations of the Republic of Belams development, mles of registration

1.01.04-99 General manual of quality in construction. The basic rules 1.03.01-99 Technical control in construction. Basic principles 5.01 .Ol -99 Soil bases and foundations for buildings and structures

Standards Foundations CT6 107697 CT6 1164.0-99

Loading rOCT 8829-94

Earthquake resistance CT6 21.302-99

CT6 21.303-99

steel Structure8 CT6 4.253-96 rOCT 2404594 TOCT 3024594

Aluminium structures CT6 4.221-96 rOCT 22233-93

Concrete structures

CT6 118599

CT6 1 11 0-98

CT6 1 178-99

rOCT 10060.4-95 rOCT 22904-93

TOCT 30062-93

Masonry structures None reported limber structures CT6 1074-97 CT6 4.208-95

Concrete and reinforced concrete conFtructions for foundations Soil bases and foundations for buildin s and structures. Quality surveillance and takingover of works. Kinds of the control and stru ct$ ,re controllable parameters

Reinforced concrete and prefabricat Assessment of strength, rigidity a n d s c k resistance

concrete building products. Loading test methods.

requirements of documents

Quality rating system. Building. Alumi ium Structures Extruded Sections From Aluminum Alkys For Enclosure Building Structures. General specifications

Reinforced concrete columns for build ngs and structures. General specifications Exterior concrete and reinforced conc J ,ete panels for buildings and structures. General specification. Formwork To Raise Cast-In-Place Cohcrete And Ferroconcrete Constructions. General

Concretes. Strucfure-mechanical rapi method for the determination of fmst-reslstance Reinforced concrete structures. Magn tic method of the determination of the thickness of concrete protection layer and the loca 'on of reinforcement

specifications

Reinforcement for reinforced concrete,structures. Eddy current method of strength properties controi

t Profiled Details From Wood And WO Productquality index system. BuildiJ Wooden Laminated Structures And Details. Nomenclature of indices

Materials For Residential Building. Spedfications


Ministry of Architecture and Construction of Republic of Beiarus 220048 Minsk Fax: 375 17 220 38 33 Miassnikova Street, 39

Notes Construction technical documents and Standards are controlled by Strojtechprom 220002 Mlnsk Kropotkin Street 89

Tel: + 75 17 8 017 227 29 54 b Regulatory Body

Tel: + 75 17 8 017 283 26 19

CT6: belarussian national Standard TOCT: GOST (Russian) Standard

Fax: $I 75 17 28 61 21

0 BSI 2001 Feb-Ol


BERMUDA


Bermuda Building Code 1998 made up of :- The Bermuda Commercial Building Code 1998 The Bermuda Residential Building Code 1998 The Bermuda Mechanical Code 1998 The Bermuda Electric Code 1998

Standards Sbuctural Design BOCA Ch 5 BOCA Ch 6

BOCA Ch 15 BOCA Ch 16 BOCA Ch 17 BOCA Ch 18 BOCA Ch 19 BOW Ch 20 BOCA Ch 21 BOCA Ch 22 BOCA Ch 23 BOCA Ch 31 BOCA Ch 34

General building limitations Types of construction

Roofs and roof structures Structural Loads Structural Tests and Inspections Foundations and Retaining walls Concrete Lightweight metals Masonry Steel wood Special construction Existing structures

Acceptable Foreign Standards BOCA* National Building Code 1996 International Mechanical Code 1996 National Electrical Code 1996

Regulatory Body Department of Planning 30 Parliament Street Hamilton HM 12

Fax: Notes

Building Officials and Code Administrators International Inc 4051 W Flossmoor Road Country Club Hills Illinois 604785795

Tel: 70W99 2300

Department of Health Old Hospital Building 2"6 Floor, 7 Point Finger Road Paget DV 04

General EnquiriedHealth and Plumbing Inspections: 236 0224 FaX: 236 4006

297 7756 297 7755 297 7828 297 7634 295 4100

0 BSI 2000 Sep-00

BSI International Suwey Structural Design Codes

BOSNIA - HERZEGOVINA

National Regulations Regulations on quality of weldings for steel construction supports (Official'Journal SFRJ 41/64) Regulation on tolerances of measures and shapes of steel structure supp rts (Official Jopurnal SFRJ 41/64) Regulation on quality of concrete construction supports (Official Journal S RJ 11/87) Regulations on normative for concrete and precast concrete structure sup rts (Official Journal SFRJ 51/71,15/77) Regulation on normative for design concrete and precast structure (Offici41 Journal 35/70) Regulation on technik normative for walls (Official Journal 17/70)

b Regulation on mandatory certification for facing bricks and clay blocks RegulaUon on mandatory certification clay tiles (Official Journal SFRJ

Journal SFRJ 24/90)

Standards Loading JUS U.C7.110

JUS U.C7.111

JUS U.C7 112 JUS U.C7 113 JUS U.C7 121

JUS U.C7 122

JUS U.C7 123

Bases for design of structures - Wind lbads on structures. General principles and the mean aerodynamic wind pressure Bases for design of structures - Wind {bads on structures - Dynamic factor and aerodynamic wind pressure Bases for design of structures - Wind I ads on structures - Wind load on buildings Bases for design of structures - Wind I ads on structures - Wind loads on other structures Bases for design of structures - Load S I ,due to use and occupancy in residential and public buildings Bases for design of structures - DeteTination of imposed floor loads in production buildings and warehouses Bases for design of structures - Adion; due to selfweight of structures non-structural elements and stored materials used in stuctural besign - Density

Earthquake resistance Information unavailable

Steel structures JUS U.E7.081 JUS U.E7.086 JUS U.E7.091

JUS UE7.096 JUS U.E7.101 JUS U.E'I.111 JUS U.E7.121 Concrete structures JUS U.E3.050 JUS U.Ml.046 JUS U.Ml.047 Masonry structures JUS U.Nl.100

Timber structures JUS U.Cg.200 JUS U.C9.200/1

JUS U.Cg.300

Stability of steel constructions - Axial compressioned single members of constant cross Stability of steel constructions - Effecti e lengths of cornpression members Stability of steel constructions - Axial1 1 , compressioned bullt-up steel members of constant cross section Stability of steel constructions - Bend1 g and compression Stability of steel constructions - Latera buckling of girders Stability of steel constructions - Stabili of compressloned members in frames stability of steel constructions - Buckli b g of plates

Prefabricated concrete units. Techniql requirements for manufacture and mounting Testing of bridges with test load Load test and break test for the buildiig constructions

Prefabricated elements for buildings - for buildlng blocks - Technical require P ents and test methods

ncrete hollow building blocks - Technical requirements

Structural timber design - Solid timber construction and fibre building boards construction Structural timber design - Solid timber L nstruction and fibre building boards construction - amendments Structural timber design - glued lamin$ted members -Technical requirements

Acceptable Foreign Standards Eurocodes are not currently acceptable.

Regulatory Body Information unavailable

Notes

0 BSI 2000 Sep-00


BRAZIL

National Regulations ABNT AssociaCgo Brasileira de Normas Tknicas I CB-02 Comit6 Brasil& da ConstruMo Civil Brazilian Association for Technical Standards I Brazilian Comittee for Civll Construction

Standards Loading NBR 8681:1984 NBR 8044:1983 NBR 6120:1978 NBR 71W.1982 NBR 71891983 NBR 6123:1987 NBR 116821991 NBR 97823985 Earthquake resistance

St-1 StrUdUreS NBR 8800:1986 NB 143:1967 Concrete structures NBR 61 182000 NBR 9062:1985 NBR 6122: 1996 Timber structures NBR 7190:1994 Composite structures NBR 5629:1996 NBR 10837: 1989 NBR 71971989

Loading and safety on structures Geotechnical Project

Moveable loads for Wind loads in buildings Stability of slopes - Procedure Loading for dock works, marines and Auvial structures

None

Design and construction of steel stru ures for buildings - Limit states method Design of steel structures formed by %Id laminated profile - Limit sates method'

Part 1 - Design and Part 2 - Design and construction of Design and construction of

) concrete

Design and construction for timber strbctures - Limit states method - Tests methods included

Ties anchored in soils - Procedure ,

Design of structural masonry walls wi concrete blocks Design of pre stressed concrete stru$res


Regulatory Body

None. Although US codes have been influential in the Brazillan codes.

AssodaHo Brasileira de Normas T h i c a s (ABNT) Avenida Treze de Maio. 13, 2 P andar - Centro CEP: 20003 - 900 - Rio de Janeiro - RJ

Tel: +55 21 210-3122 Fax.: +55 21 220-1762 http$www.abntorg.br

Notes Planning is ruled by the Municipality Codes, and by the CREA (Regional Tunci l for Engineers and Architects)

Product approval is by those OCC ( Organism0 Credenciado para CertifidHo ) named by the government under certain rules.

' Revision NB 143:2000 in circulation for public consultation a Now under discussion at the committee level

0 BSI 2000 Sep-00


BULGARIA

National Regulations Law on Territorial and Settlement Structure Technical Normative Order on Designing, Performing and Inspecting of Qnstruction and Installation Activities Directive 89/1 OWEEC Construction Products Directive

Standards Foundations 1996 1996 W C 101 8882 t;llC 676-85 W C 3214-86 1993 W C 241 9-74 1986 W C 2762-83 6AC 9075-89

1990 Loading 1989 SAC 14784: 1979 Earthquake resistance 1989 Masonry structures 1998 steel StNCtUl'eS

1987 W C 163%: 1986 1990 Concrete structures 1999 W C 15559: 1982 1990

SAC 10038-72 Tlmber structures 1990 Aluminium structures 6AC 16333-86

Ordinance 1/96 for designing flat fountlation Norms for designing flat foundations. I

Soil mechanics. Method for laboratory determination of shear resistance. unconfined test Constructional soil. Classification , Construction soils. Physical propertie4 Definition and symbols Norms for designing pile foundations 1

-- effect. Basic terms. Classification oft$ aggressive mehia Norms for designing supportlng walls '

Norms for design of buildings and equipment In earthquake zones

Norms for designing of masonry structures

Norms for designing of steel constru ons

Norms for designing steel constructiorls from tinesectlon steel profiles Steel construction - General principl 3 for calculation

Norms for designing of concrete and r 'nforced concrete structures Concrete and reinforced concrete s h Concrete and reinforced concrete stru E res, intended for work under impact on raised and high temperatures Crushed additive materials for fire resktant concrete

res. Base for design

Norms for designing on timber structutes

Aluminium constructions - general pritjciples for calculation

Acceptable Foreign Standards Eurocodes are acceptable In Bulgaria. Their implementation and translation into Bulgarian is currently underway.

Regulatory Body Ministry of Territorial Development and Public Works 1000 Sofia 17-19. Kiril I Metody Str.

Notes Design and construction control Is carried out by National Construction Control Directorate within the Ministry of Territorial tbveloprnent and Public Works 1 WO Sofia 47, Christ0 Botev Blvd

The establishment of Notified Bodies for Conformity Assessment of cons ction products is underway. Construction products conforming to existing Bulgarian standard are ass$ by accredited Bularian laboratories.

Their upgrading and harmonization is forthcoming.

0 BSI 2000 Sep-00


CANADA

National Regulations National Building Code of Canada 1995.

(a) Part 1 - Scope and Definitions; (b) Part 2 - General Requirements; (c) Part 3 - Fire Protection, Occupant Safely and Accessibility; (d) Part 4 - Structural Design; (e) Part 5 - Environmental Separation: (9 Part 6 - Heating, Ventilating and Air-Conditioning; (9) Part 7 - Plumbing Services; (h) Part 8 - Safely Measures at Construction and Demolition Sites; (I) Part 9 - Housing and Small Buildings.

Part 4 - Structural Deslgn Section 4.1 Section 4.1.1 General Section 4.1.2 Section 4.1.3 Limit States Design Section 4.1.4 Working Stress Design Section 4.1.5 Dead Load Section 4.1.6 Section 4.1.7 Section 4.1.8 Section 4.1.9 Section 4.1.10 Other Effects Section 4.2 Foundations Section 4.2.1 General Section 4.2.2 Section 4.2.3 Section 4.2.4 Design Requirements Section 4.2.5 Excavations Section 4.2.6 Shallow Foundations Section 4.2.7 Deep Foundations Section 4.2.8 Special Foundations Section 4.3 Section 4.3.1 Wood Section 4.3.2 Section 4.3.3 Section 4.3.4 Steel Section 4.3.5 Aluminium Section 4.3.6 Glass Section 4.4 Section 4.4.1 Air-Supported Structures Section 4.4.2 Parking Structures

Structural Loads and Procedures.

Specified Loads and Effects

Live Loads Due to Use and Occupanuy Live Loads due to Snow, Ice and Rain Live Loads due to Wind Live Loads due to Earthquakes

Subsurface Investigations, Drawings end Reviews Materials Used in Foundations

Design Requirements for Structural Materials

Plain & Reinforced Masonry Plain, Reinforced and Prestressed Cancrete

Design requirements for Special Struutures

Standards Hlghway Bridges CANlCSA S6-88 CANICSA - S6Sl - 1990 S6.1-M1990 s-1 StNdUreS CANICSASI 6-1 -94 PLUS 4001-95 Concrete structures A23.3-94 CANlCSAS269.3-M92 (Rl998) A23.1-941A23.2-94 PLUS 4002-95

CANSA43SM84 (Rl996) llmber structures 086.1-94 086.lSl-98 Masonry structures CAN343WM84 (R1997) A82.4lA82.51A82.6-M 1 978

A371 -94

Design of highway bridges standard CANICSA - S6-88

Limit state design of steel structures ASTM Specifications for steel: ASTM Standards referenced in CSA's CAN/CSA-S16.1-94

Design of concrete structures Concrete formwork Concrete materials and methods of ASTM specifications for concrete and 1 concrete structures design: ASTM standards referenced in

Concrete construction for housing and small buildings

ncrete constructiodmethods of test for concrete

CSA'S A23.1lA23.2-94

Engineering design in wood (Limit states design) Supplement to 086.1-94

Masonry design for buildings (a:l8) Structural clay load-bearing wall tilelSbuctural clay non-load-bearing tilelStandard method for sampling and testing structural clay tile Masonry construction for buildings

Aug-Ol 0 BSI 2001

Aluminium Structures CAN341 57-M83


Strength design in aluminium (e:5)

None known

Regulatory Body Institute for Research in Construction National Research Council of Canada Ottawa, Ontario, K1A OR6 Tel.: (61 3) 993-2607 Fax: (613) 952-7673

Notes The design and construction of every building shall meet the standards set out in !Parts 3 to 9 of the National Building Code. Tile provinces have the authority to regulate building construction. However mos provinces use the National Building Code as a base document in developing provincial building codes. In this way the Building c !I des across Canada are kept relatively similar in nature.

A number of organizations, such as CSA', CGA (Certified General Accountants ssociation of Canada) and ULC (Underwriters' Laboratories of Canada), provide full third-party certification for safety-related pro ucts or systems The NBC does not require full third-party certification, only that the product or system meets certain minimum re, 1 uirements. Code enforcement officials often rely on certification as a guarantee that such is the case. To provide tbe construction industry with a national evaluation service for innovative materials, products and systems, NRC created the Canadian Construction Materials Centre. This service includes the evaluation of new and innovative products for which no btandards exist, and of products where standards exist but for which no third-party certification program has been established. Mosl provinces and territories use the Centre's evaluatiorl reports iis a basis for accepting new products

'2SA Internaiional (Canadian Standards Association) 178 Rexdale Boulevard Torontc. ON M9W 1 H3, CANAGA Tel: (416) 747-4000 U Toll Free 1-800-463-6721 (US. 8 Canada only) Fax: (416) 747-4149 General Inquiries - Information Centre Tel: (416) 747-4058 E-maii: infoacsa-international.org

The National Building Code is adopted in the following Provincesmerrit0ries:- Yukon, Northwest Territories, Nunavut, Saskatchewan, Manitoba, Nova Scotia, Alberta (some additions), British Columbia (some additions), Quebec (some additions), Prince Edward Island (major municipalities qdopt the NBC), Newfoundland (municipalities adopt the NBC), Labrador (municipalities adopt the NBC)


ALBERTA 9 CANADA

National Regulations Alberta Building Code 1997 Part 4 - Structural Design Building Code Regulation 50198 Alberta has adopted the National Building Code 1995 with some addition$

Standards Steel structures CANICSA-SIG-1-94 PLUS 4001-95 CSA Sl36-94 Concrete Structures CSA A23.3-94 CANICSAS269.3M92 (R1998) A23.1-941A23.2-94 PLUS 4002-95

CAN3-A438-M84 (Rl996) limber Structures CANICSA 086.1-94 086.1 S i -98 CAWCSA 0 177-M89 Masonry Structures CANS304-M84 (R1997) CSA S 304.1M84 (Rl994) A82.4lA82.5lA82.6Ml978

A371 -94 Aluminlum Structures

Glass CANICGSB 12.20-M89 Air Supported Structures

Parklng Structures

C A N S 1 57-M83

CAN3 S367-M81

CSA s413-94

Limit state design of steel structures ASTM SpeciRcations for steel: ASTM ktandards referenced in CSA's CAN/csA-S16.1-94 Cold formed steel structural membed


Concrete materials and methods of ASTM specifications for concrete and i concrete structures design: ASTM standards referenced in

Concrete formwork

Concrete construction for housing and small buildings

ncrete construction/methods of test for concrete

CSA'S A23.11A23.2-94

Engineering design in wood (Limit s t a b design) Supplement to 086.1-94 Qualification Code for manufacturers of structural glued laminated timber

Masonry design for buildings (a:l8) Masonry design for buildings (Limit S tes Design) Structural clay load-bearing wall tile/S t ctural clay non-load-bearing UldStandard method for sampling and testing structural clay tile Masonry construction for buildings

Strength design in aluminium ( e 3

Structural design of glass for buildings

Air supported structures

Parking structures


Regulatory Body

None

Alberta Municipal Affairs Safety Services, Building and Fire Safety 705-1 0808-99 Avenue Edmonton, Alberta T5K 0 6 5 Canada

Notes The owner of the building is required to provide written assurances beford construction starts that the appropriate professionals have been retained for the design and site review of the project.

and erectors

The Alberta Regulation AR 201191 Building Permit (Consolidated up to 3W93) is in place for permit Issuance outside authorized municipalities.

Alberta Building Code is available from: Learning Resources Distributing Centre 12360 - 142 Street, Edmonton, Alberta, T5L 4x9 Tel: (780) 427-5775. Fax: (780) 422-9750

It is also available on CD ROM format through the National Research Council on: 1-800-872-7990

0 BSI 2001 Aug-Ql

BSI International Survey I Structural Design Codes

kEW BRUNSWICK - CANADA

National Regulations The National Building Code of Canada 1995 is adopted by some municipalities

Standards Steel Structures CANlCSA-SlG-1-94 PLUS 4001-95 Concrete structures A23.3-94 CNCSAS269.3-M92 (Rl998) A23.1-941A23.2-94 PLUS 4002-95

CAN3-A438-M84 (Rl996) Timber structures 086.1-94 086.1 S i -98 Masonry structures CAN3-SSM84 (R1997) A82.4lA82.5lA82.641978

-71-94 Aluminlum Structures CANS157-M83

Limit state design of steel structures ASTM Specifications for steel: ASTM $tandards referenced in CSA’s CANICSA-Sl6.1-94


Concrete materials and methods of co Crete constructiodmethods of test for concrete ASTM specifications for concrete and t ncrete structures design: ASTM standards referenced in

Concrete form work

Concrete construction for housing and1 small buildings CSA‘S A23.1lA23.2-94

Engineering design in wood (Limit stab design) Supplement to 086.1-94

Masonry design for buildings (a:18) Structural clay load-bearing wall tilelshctural clay non-load-bearing tilelstandard method for sampling and testing structural clay tile Masonry construction for buildings

Strength design in aluminium (e:5)

Acceptable Foreign Standards NBC of Canada is a performance based code

Regulatory Body Department of Munidpallties and Housing PO Box 6000 Frederlcton New Brunswick E3B 5H1 Canada

Notes Permits are issued by Inspectors appointed by the Department of Munidpflities and Housing (see above)

Transportation.

For a copy of the Provincial Building Regulation contact: Centennial Building Room 115 P.O. Box 6000 Fredericton, N.B. E3B 5Hl (506) 453-2520 Fax: (506) 3457899

0 BSI 2001 Aug-Ol


CHINA National Regulations The compulsory provisions of engineering Construction Standards2000: building Construction Standards

Loading

Earthquake resistance GB50009-2002

6850223-95 GB50011-2001 GB50023-95 685117-88 6850191-93 JGJl16-98 CECS126:2001 Steel structures GB50017-2002 GB5OOl8-2002 JGJ99-98 JGJ7-91 J G J 1 38:200 1 CECSl02:98 CECS77:96 JGJ138:2001

Aluminium structures None Concrete structures GB50010-2002 68577-85 GBJl30-90 JGJ3-91 JGJl2-99 JGJlT21-93 JGJlT22-98 JGJfl92-93 JGJ95-95 CECS26:90 CECS28:90 CECS38:92 CECS39:92 CECS5l :93

CECS52:93 CECS58:W CECS88:97 CECSlO4:98 CECS25:90 Masonry structures GB50003-88

JGJlT14-95 JGJl37-2001

JGJ5-80

CECS08:89 CECS20:90

Timber structures GB50005-2002

Loading code for design of building strbctures

Standard for classification of seismic drotection of buildings Code for seismic design of building Standard for earthquake-resistant eva ation of buildings Standard for earthquake-resistant eva ation of industrial constructional structures Code for design of earthquake-resista F t of structural construction Technical specification for Technical specification for bearing isolators

Code for design of steel structures Technical code for design of cold-form: d thin-wall steel structures Technical specification for steel struct re of tall buildings Technical specification for trussed str tures Technical specification for steel reinfo d concrete composite structures Technical specification for steel struct re of light-weight buildings with gables frames

Technical specification for steel reinfobd concrete composite structures Technical code for strengthening steel f structures

Code for design of concrete structureq Code for design of reinforced concretd silos Technical code for reinforced concret life-slab structure Technical specification for reinforced ncrete structure of tall buildings Specification for design of light weight aggregate concrete structures Technical specification for V-style re-c wed roof cover Specification for design of reinforced ncrete shall structures Technical specification for concrete s ctures pre-stressed with unbounded tendons Technical specification for concrete s I ctures with cold-rolled ribbed steel wires and bars Technical specification for Reinforced ncrete with coupled steel bars Technical specification for concrete-fill d steel tubular structures Technical specification for steel fiber r inforced concrete structures Specification for design of reinforced I ncrete deep beams Specification for design of reinforced Wncrete continuous beams and frams considering redistribution of internal forces Technical specification for column-slat) building assembled by monolithic prestressing Technical specification for Specification for design of Technical specification for Technical specification for

Code for design of masonry structures' Technical specification for middle-size block buildings Technical specification for small-sized hollow concrete masonry buildings Technical code for perforated brick m 4" sonry structures Technical code for brick silos Technical specification for masonry c&structed of autoclaved sand-lime bricks

Code for design of timber structures

Acceptable Foreign Standards None reported

0 BSI 2002 July 2002

BSI International Survey , Structural Design Codes

Regulatory Body

Department of Standards and Norms Ministry of Construction 9#, Sanlihe road Beijing, 100835 Tel:86-I 0-68393043168394385 http1hww.cecs.org.m

China Association for Engineering Construction Standardization (CECS) 9#, Sanlihe road Beijing, 100835 Tel. 8810-68394012 http1hww.cecs.org.cn

Notes

0 BSI 2002 July 2002


CROATIA

National Regulations Zakon o gradnji ("Narodne novine" br. 52/99, 75/99. 117101) The Building Act (Official Gazette No. 52/99, No. 75/99) Bases for Design of structures Official Gazette 15/90 Official Gazette 21/90

Official Gazette 3/81,49/82. 29/83, 20/88, 52/90 Official Gazette 26/88 Concrete structures Official Gazette 11/87 Official Gazette 14/89

Official Gazette 52/85

Official Joumal No. 15/90

Steel structures. Official Gazette 61/86 Official Journal No 61/86

Official Journal No. 41/85. 20/88

Regulations for technical normative fqr foundation of buildings Regulations for technical normative fdr design and constructions of final works in buildings

Technical regulations for high-rise building construction in the seismic fields

Regulations for technical normative on loading of structures

Regulations for technical normative f r concrete and reinforced concrete Regulations for technical normativeslor design and constructing from processed elements from

Regulations on the technical requirements of lightweight aggregate concrete and lightweight aggregate reinforced concrete.

Regulations for technical normative f r structural steel work Regulations on the technical require 4 ents of bearing steel constructions

Regulations on the technical requirenlents of steel wires, rods and ropes intended for the prestressing of constructions.

Standards all of the above mentioned regulations are connected with the old JUS standards; these are available in the State Office for Standbrdisation and Metrology


Although many of the old JUS standards are being withdrawn and replawd with European standards (where such exist), they remain integrated as a part of the above mentioned regulations; Foreign standards are acceptable (but not recommended) if the design 01 the structure is made in accordance with the essential requirements (six essential requirements from the 89/106/EEC Directive), and at least on the security level regulated with the above mentioned regulations

Regulatory Body Ministry of Environmental Protection and Physical Planning Building Division

Ulica Republike Austrije br. 20 HR-10000 Zagreb Croatia

Tel: +385 1 37 82 145 Fax: +385 1 37 82 466 E-mail: [email protected]

www.mzopu. hr

Notes Mandatory testing required for 1. Fractionated stone aggregate for concrete and asphalt, 2. Cement, 3. Fapde bricks and clay blocks, 4. Clay roofing tiles, 5. Concrete aggregates, 6. Hydro insulating materials impregnated with bitumen, 7. Pre-manufactured elements of comb concrete, 8. Concrete tubes for sewage

0 BSI 2002 July 2002


CYPRUS

National Regulations The Streets and Building Law - Chapter 96 - Law no 14 of 1959 as well ag the relevant Streets and Buildings Regulations and their amendments thereafter:

Standards Concrete Structures Gout Gazette No 2750 KDP 277192 Gout Gazette No 2867 KDP 54194 Official Gazette No 2760, 23.12.92 304192 Official Gazette No 2194, 27.12.86 284186 Steel structures

Masonry structures

limber structures

Loading

Seismic Code for reinforced concrete ktructures

Code for concrete structures (CYS 15p: Part 1 8 2) and CYS 13 on concrete technology

Ready mixed concrete (CYS 11 1)

Concrete aggregates (CYS 64)

No standards at present



No standards at present Established speed of win(- .Jading .- 120 Km per DUr

Acceptable Foreign Standards British, European and American Standards are acceptable

Regulatory Body Ministry of Interior DSeveris Ave. Nicosia, Cyprus

Notes Established speed of wind loading is 120 Km per hour

No attestation of conformity for CE marking can be canied out at present as no Approval testing Institutions exist.

Competent authoritles: Materials Laboratory of Ministry of Communications and Works 1483 Nicosia Cyprus

Mines Services 1422 Nicosia Cyprus

0 BSI 2001 Aug-Ol


CZECH REPUBLIC

National Regulations Act No 50111976 Col1 on Town 8 Country Planning and on Building Reguldtions (The Building Act) Decree No 13111998 Col1 on Non-Statutory Planning Materials and Plannipg Documentation Decree No. 13Z1998 Col1 on Detailed Specification of Same Building Act Ftipulations Decree No 137/1998 Col1 on General Technical Construction requirement$ Decree No 17411994 Col1 on General Technical Requirements Ensuring de Use of Constructions by Persons with Limited Ability of Movement

Standards Structural Codes CSN 73 0031: 1990 CSN 73 0032 : 1978 CSN 73 0035 : 1988 CSN 73 0037 : 1992 CSN 73 0038 : 1987 CSN 73 0040 : 1996 CSN 73 1000 : 1989 Loading CSN 73 0033 : 1991 CSN 73 0036 : 1975 Concrete Structures CSN 73 1205 : 1982 CSN 73 1201 : 1988 CSN 73 1203 : 1992 CSN 73 1204 Steel Structures CSN 73 1206 : 1986 CSN 73 1401 : 1995 CSN 73 1402: 1988 CSN 73 1403 :1990 CSN 73 1404 : 1987 CSN 73 1408 : 1989 CSN 73 1500 : 1986 Stone Structures CSN 73 3251 : 1987 CSN 73 1101 : 1981

CSN 73 1701 : 1984 Aluminium Structures CSN 73 1590 1986

wood StNdUreS

Basic specifications for calculation - Reliability of building constructions and foundation soils. Calculation of building structures load& by dynamic effect of machines Actions on building stmctures Earth pressure acting on structures Design and assessment of building s ctures subjected to reconstruction Loads of technical structures by techn Foundation of buildings and structure F asic design requirements

I seisrnicity

Basic regulations for loading and effects - Reliability of building structures and foundation soils. Seismic loads of buildings.

Basic requirements for the design Concrete structures Design of concrete structures Design of lightweight aggregate concrete structures Design of concrete two-way slabs

Composite steel-concrete structures Bbsic design requirements Design of steel structures Design of light gauge cold-formed pro les in steel structures Designing of hollow sections In steel s&ctures Design of steel structures of hydraulic pmitructions Design of steel structures of Industrial bridges Steel structures Basic requirements for calculation

Design of structures of stone Design of masonry structures

Design of wood structures

Aluminium Structures

Acceptable Foreign Standards Structural Eurocodes

Regulatory Body Ministry for Regional Development Department of European and International Law Staromestske namesti 6 CZ-110 15 Praha 1

Tel: 4 2 0 2 248 61260 Fa: 4 2 0 2 248 62374

Approtal for materials is carried out by:

CSNl

Tel:O )21802111 Fax: ( 2) 21 802 301 E-mail t [email protected]

0 BSI 2001 Feb-Ol


ESTONIA

National Regulations There is no complete Estonian Building Code at this time

Standards Estonian Design N o m (EPN) have been elaborated on the basis of Eurocodes, but deviate from these due to local conditions.

Loading EPN 1.1.1 EPN 1.2.1 EPN 1.2.3 EPN 1.3.4 EPN 1.2.5 EPN 1.2.6 EPN 1.2.7 EPN 1.3 EPN 1.4 Earthquake resistance

Steel structures EPN 3.1.1 EPN 3.1.2 EPN 3.1.3 EPN 3.1.4 EPN 3.1.5

EPN 3.4.2 Concrete structures EPN 2.1.t EPN 2.1.3 Masonry structures

limber structures EPN 6.1.1

EPN 5.1.1 EPN 5.2

Basis of design Loads. Introduction (draft) Construction loads (draft exposed to sbjections) Imposed loads Snow load (draft) Wind loads (draft exposed to objectioms) Loads in case of fire (draft) Traffic loads on bridges (draft) Actions in silos and tanks (draft)

No any regulations

Steel structures. Design of buildings. Steel Structures. Resistance to fire (d ft) Design of cold formed steel sbuctur (draft) Design of stainless steel structures (d ft) Supplementary requirements for desi f n of steel plane plates, having no loads crossing the surface of a plate (draft) Liquid retaining steel Structures (draft)

Concrete structures. General guidelin ' and guidelines for design of buildings (draft) General guidelines for design of p r J st concrete structures (draft)

Masonry structures. General guidehe and guidelines for design of buildings (draft)

Timber structures. General guidelinesland guidelines for design of buildings (draft) Timber bridges (draft)

Acceptable Foreign Standards Unless there is an appropriate Estonian building regulation, the former Sopiet Union's appropriate regulation that was valid on the

The licensed design enterprises are allowed to ignore building law and have approval of appropriate (mostly

01.01.1991 is acceptable.

international code

responsibility, prove compliance with the planning and erein they are allowed to use any available national or

Notes The following products require masndatory assessment of conformity: Precast concrete products Concrete and mortars Cement Aggregates for concrete and mortar Reinforcement steel Masonry products:- calcium silicate bricks; clay bricks; concrete blocks anti bricks; AAC blocks; LWC blocks: intels: Thermal insulating products Roof coverings

Approval Body: Tallinn Technical University; Centre 'EhltusTEST"; GqUfication Bureau of Technical Research Centre of Rescue Board (safety in case of fire): OU 'Kserteks" (thermal insulating products)

0 BSI 2000 Sep-00


EGYPT

National Regulations Egyptian Code to calculate the loads and forces for structure and buldinglworks 1999 Building Code Part 7 1996 The resistance of bearing wails buildings to ea quakes

Egyptian Code of practice for reinforced concrete structures 1999 Ro& foundation code Egyptian Code for soil mechanics and basics of construction for foundations 1999 Building requirements code for the handicapped 1999

Egyptian code for basics of design and construction for steel structure 1 $

Standards Loading Egyptian code of loads and forces 1999

Earthquake resistance None

steel structures Egyptian code for design and construction of steel structure 1999

Alumlnium structures None

e Concrete structures .

Egyptian code of prachie for reinforced and prestressed concrete strudures 2001

Masonry StNdUreS

Egyptian code of masonry structures 2001

Tlmber structures None

Other code of foundation and soil mechanics 1999


American and British for items not induded in Egyptian code and standards

Regulatory Body Ministw of Housina. Utilities 8 Urban Communitlea

e Housing 8 Buildlng.Research Centre 87 El-Tahreer St Dokki Gta PO Bo 1770

Tel: +20 3356 722 - 7617107 - 7617092 Fax: +20 3351 564 m a i l : [email protected]

e 0 BSI 2002 Jan-2002


FIJI


Standards Loading FJS A S 1170.1: 1998 FJS AS 1170-2: 1998

National Building Code 1990

Minimum design loads on structures. Minimum design loads on structures.

loads and load combinations


FJS ASS 1170.4 Supp 1: 1998 FJS ASS 11 70.4: 1998 Minimum design loads on structures.

Minimum design loads on structures.

StWi StNctUreS Based on the New Zealand standards


FJS A W S 1664.1 Supp 1: FJS ASMZS 1664.1: 1998

FJS AWNAS 1664-2 Supp 1:

1998 FJS ASINAS 1664-2: 1998

1998

Aluminium structures - Limit state desi n Aluminium structures - Limit state desi 1 n - Commentary

Aluminium structures - Allowable Aluminium structures -Allowable

Concrete structures Based on Australian Standards

Masonry structures Based on Australian Standards

Timber structures Based on Australian Standards

Acceptable Foreign Standards Australian and New Zealand Standards

Regulatory Body Ministry for Health PO Box 2223 Suva Fijl Islands

Tel: +679 3061 77 Fax: +679 306177

Notes Trade Standards and Quality Control OfAce PO Box 21 18 Govt Buildings 9 Goodenough She Suva Fiji Islands

Tel: +679 305 41 1 Fax: +679 302 617

Fiji Standards relating to buildlng materials are adopted from AusWlIadNew Zealand Standards.

0 BSI 2001 Aug-Ol


National Regulations The Standards listed are mandatory

Standards Loading SNiP 2.01.07-85 GOST 27751-88 Earthquake resistance SNIP 11-7-61 Steel structures SNIP 11-23-81 SNIP 111-16-75

SNIP 2.04.12-86 SN 527-80 Aluminium structures

Concrete structures SNIP 2.03.06-85

SNiP 2.03.01-84 SNiP 2.03.02-86

SNIP 2.03.04-84

a SNIP 2-03-03-85

SNiP 2-06-0647

SNIP 111-1880 SNIP 3.09.01-85

SN 27780 SN 52480 GOST 251 92-82 GOST 1409845

Masonry structures SNIP 11-22-81 SNIP 111-24-75 SNIP 3.03.01-87 Timber structures SNiP 11-2580

Loads and effects Reliability of the constructions and the'foundations. Principal rules of the calculations

Construction in seismic areas

Steel structures Metal structures

Strength Analysis of Steel Pipelines Specifications for the designing steel dipelines P maxlO M Pa


Concrete and reinforced concrete stru Dense silicate plain concrete and rein&ed concrete structures Wire fabric reinforced concrete Design manual for concrete and reinfokced concrete structures for the use at high and extremely high temperatures Concrete and reinforced concrete stru res for hydraulic structures Fabrication of Precast Reinforced Con ete Structures Composite steel and reinforced wncr te structures. Requirements for design and inspection. Fabrication Guidelines to Cellular Con rete Guidelines for Fabrication and Use of f High-Density Silicate Concrete Concretes. Classification and general echnicai requirements Welded joints of reinforcement and in rts for reinforced concrete structures -Types. designs,

res

dimensions E Masonry and reinforced masonry strucjtures Industrial furnaces and stacks Loadbearing Structures and Enclosurb

Wood structures


Regulatory Body

Foreign Standards are not acceptable a State Architecture and Construction Inspectorate Vadza Pshavela Aave 16 Tbilisl Georgia 380060

a 0 BSI 2001 Aug-Ol

BSI International Survey ! Structural Design Codes

HONG KONG

National Regulations Law of Hong Kong Chapter 123 Buildings Ordinance

Building (Administration) Regulations Building (Construction) Regulations Building (Demolition Works) Regulations Building (Planning) Regulations Building (Private Streets and Access Roads) Regulations Building (Refuse Storage Chambers and Chutes) Regulations Building (Standards of Sanitary Fitments, Plumbing, Drainage Works and Latrines) Regulations Building Wentilating Systems) Regulations Building (Oil Storage Installations) Regulations Building (Enew Efficiency) Regulations Building (Appeal) Regulations Technical Memorandum for Supervision Plans

Standards Loadlng Covered by Building (Construction) Regulations Also see Code of Practice on Wind Effects Hong Kong - 1983 Earthquake resistance Building (Construction) Regulations do not have provisions on seismic design Steel structures Code of Practice for the Structural use of Steel 1987 Code of Practice for Fire Resisting Construction 1996 Aluminium structures No local codes of practice Concrete structures Code of Practice for the Structural use of Concrete 1987 Code of Practice for Fire Resisting Construction 1996 Masonry structures No local codes of practice Ti m ber structures No local codes of practice

Acceptable Foreign Standards The Building Regulations do not specify any Standards. Designs may be qpproved if they can be shown to achieve the

In the majority of cases building structures of reinforced concrete or struct ral steelwork are deemed to satisfy the performance requirements of the Regulations if they are designed in a m dance with the Code of Practice for the Structural use of Concrete and/or the Code of Practice for the Structural U k e of Steel.

required performance criteria set out in the Building Regulations

e

e Regulatory Body Buildings Department 1ZF Pioneer Centre 750 Nathan Road, Kowloon General enquiries Tel: +852 2626 1616 e-mail: [email protected]

Any person who intends to cany out building works is required by law to a point an Authorized Person, and where

Government Publications Centre Ground Floor. Lower Block, Queensway Government Offices, 66 Queensway, Wanchal, Hong Kong Tel: +852 2842 8844. (Members of the public can also place their order directly through the Internet: http:/lwww.info.gov. hk/bd/english/documents/index. htrnl)

Notes

necessary a Registered Structural Engineer to prepare plans for approval R om the Building Authority.

0 BSI 2002 July 2002


HUNGARY

National Regulations 1. Law No uo(vIII of 1997 On the forming and protection of the constructed environment 2. Government Order No 253/1997. (X11.20) On the national requirements of building as well as future developments of settlements 3. Order No. gal999 (XI. 5) FVM of the Minister of Agriculture and Coun* Development on the declaring mandatory of certain national building standards. 1 8 2 give essential requirements for construction works. such as Direct& 89/1 OWEEC 3 specifies mandatory standards

Standards Design of Load bearing structures of buildings MSZ 1 5020: 1986 Design of load bearing structures of b ildlngs - General Requirements MSZ 15021-1: 1986 Design of load bearing structures of bbldings - Design loads for buildings MSZ 15021-2: 1986 Design of load bearing structures of buildings - Rigidity's requirements. Steel Structures MSZ 15024-1: 1985 Designing requirements MSZ 15024-2 1988 " Composite structures Aluminium Structures

Statical design of load carrying cons ctions of buildings - Aluminium construdons Statical design of aluminium loadbea 'M g structures for buildings - Orinclples of strength

MSZ 15028-1: 1976 MSZ 15028-2: 1984

calculations Concrete Structures

Design of load bearing structures of b' ildings - Reinforced concrete structures MSZ 15022-1 : 1986 1 M (1992)' Design of load bearing structures of b ildlngs - Reinforced concrete Structures

Design of load bearing structures of b ildlngs - prestressed concrete Structures MSZ 15022-2: 1986 1M (1992)' Design of load bearing structures of b i ildings - prestressed concrete Structures

Design of load bearing structures of b ildings - Concrete structures Design of load bearing structures of b t: ildings - Concrete, reinforced concrete and strained MSZ 150224: 1986 concrete prefabricated structures

MSZ 15022-7 1986 Design of load bearing structures of buildings - Structural regulations for reinforced concrete constructions

MSZ 15022-7 1986 1M (1992)' Design of load bearing structures of buildings - Structural regulations for relnforced concrete constructions

Masonry Structures Building structures for building and fi ng - Masonry struartres Building structures for building and fi ng - Stone structures and stone sculpture work Statistical design of load carrying mas 1 nry constructions of buildings

MSZ 04-803-1 : 1989 MSZ 04-803-2: 1989 MSZ 15023: 1987 Wood StNctUreS MSZ 04-803-6: 1989 Building structures for building and fiqng - Timber structures and load bearing timber structures MSZ 15025: 1989 StaUcal design of load carrying wooden constructions of buildings General MSZ 150282 1984 Principles of strength calculations MSZ 15012-1:1986' Terminology MSZ 15012-21985 Symbols


Regulatory Body Ministry of Agriculture and Country Development Office for Construction H-1860 Budapest, Pf 1

Contact Kov&cs lmre

MSZ 15022-1: 1986

MSZ 15022-2: 1986

MSZ 150223: 1986

All Eurocodes are acceptable in Hungary

0 BSI 2000 Sep-00

Notes Building control is run on a local level

According to the lllingarian regulation innovative products as well as exported praducts require techntcal approvals.

PLC for Quality Control and Innovation in Building Hungary, Budapest, Di6szegi ut 37

Fax: 36- 1-386-8794

Mandatory requirements


INDIA

National Regulations National Building Code of India Part VI: Structural Design Section 1: Loads Section 2: Foundations Section 3: Wood Section 4: Masonry Section 5: Concrete - - Plain and reinforced concrete - Prestressed concrete Sectlon 6 Steel Section 7: Prefabrication and systems building

Standards Foundations IS 1892: 1979 IS 1904: 1983 IS 13063 Loading IS 875 Part 1: 1987

IS 875 Part 2: 1987

IS 875 Part 3: 1987

IS 875 Part 4: 1987

IS 875 Part 5: 1987

Earthquake resistance IS 1893 1984 IS 4326 : 1993 IS 13827: 1993 IS 13828: 1993 IS 13920: 1993 steel StNdUreS*

IS 800 1984 (1991) IS 801: 1975 (1991)

IS 806 1968 (1991) IS 808: 1989 a IS 811: 1987 Concrete structures IS 456: 1978 IS 457 1957 (1991)

IS 1343:1980 IS 2210 1992 IS 2185: Part 1: 1979 IS 2185: Part 2: 1983 IS 2185: Part 3: 1984 IS 6072 1971 IS 6073 1971 IS 7861: Part 1: 1975

IS 7861: Part 2: 1981

IS 8989: 1978 ' limber structures IS 883: 1994 IS: 1986 Masonry structures IS 1905: 1987 a

Code of practice for subsurface inves gations for foundations Code of practice for design and cons don of foundations in soils: General requirements Structural safety of buildings on shallo t foundations on rocks - Code of practice

Code of Practice for design loads ( o er than earthquake) for buildings and structures. Dead loads. Unit weights of building 4 aterials and stored materials. Code of Practice for design loads ( ottler than earthquake) for buildings and structures. Imposed loads Code of Practice for design loads ( oqer than earthquake) for buildings and structures. Wind loads Code of Practice for design loads ( oqer than earthquake) for buildings and structures. Snow loads Code of Practice for design loads ( other than earthquake) for buildings and structures. Special loads and combinations.

Code of practice for general constructi n in steel (reaffirmed 1991) Code of practice for use of cold form 3 light gauge steel structural members in general building construction Code of practice for use of steel tubesiin general building construction Dlmensions for hot rolled steel beam, Cold formed light gauge structural ste

and angle sections

Code of practice for plain and reinfo Code of practice for general construTn of plain and reinforced concrete for dams and other massive structures

concrete

concreting Code of practice for extreme weather concreting - Recommended practice for cold weather concreting Safely code for erection of concrete framed structures

Design of structural timber in building - Code of practice Structural timber in building

Code of practice for structural use of uh-reinforced masonry

0 BSI 2001 Aug-Ol

Composite structures IS 3935: 1966 (1998) IS 1 1384: 1985

Code of practice for composite construction Code of practice for composite construction in structural steel and concrete

Acceptable Foreign Standards The Building Code of India is not a mandatory code therefore foreign standards which can prove compliance are acceptable.

Regulatory Body Ministry of Urban Development Government of India

Maulana &ad RuJd New-Delhi-1 1001 1

, Nirman Bhavan

Notes Special Publication 7: 1983 National Building Code of India Group 1: For architects Group 2: FOi structural Design Engineers (covers Part VI of the NBC) Group 3: For construction engineers Group 4: For building services engineers Group 5: For plumbing services engineers

Available from Bureau of Indian Standards Manak Bhavan 9 Bahadur Shah Zafar Marg New Delhi 110002 Tel: +91 11 323 01 31 Fax: +91 11 323 4062

Building bye-laws are enforced by the concerned municipality/municipal corporation/development authority of the area in the VariOUS states of India.

Central Building Research Institute, Roorkee - 247 667 Uttar Pradesh India Phone: 91 -1 332-72243 FAX 91 -1 332-72272/72543 Email [email protected] www.cbri.org or www.csir.res.in/cbri

Imported cement and steel products must comply with mandatory Indian quality ktandards. The standards include printing of maximum retail sale price inclusive of all taxes, date of packaging, net quantity ankJ generic or common name of the commodity besides name and address of importer.


INDONESIA

National Regulations Not reported by authority

Standards SNI 03-28451992 Loading SNI 03-1727-1989 SNI 03-2397-1991 Earthquake resistance SNI 03-1726-1989 steel structures SNI 03-17291989 Concrete SNI 03-1734-1989 SNI 032847-1992 SNI 03-3430-1994 Masonry structures SNI 03-3431-1994

Code of design for modular apartment

Loading speciflcation for houses and uildings, guide for design Wind resistance simple buildings, Cod 1 for design

Seismic resistance design code for hohses and buildings, Guide

Steel construction for buildings, guide for design

Stone and building - Code for controllihg horizontal displacement by Inclinometer instrument

Acceptable Foreign Standards Not reported by authority

Regulatory Body Ministry of Settlement and Region Development

0 BSI 2000 Sep-00 I


ISRAEL

National Regulations All the standards listed below are mandatory, as being referred to by the Design and Building Regulations, published by the Interior Ministry

Standards Loading SI 109 - 1996 SI 412 -:1992 (1993) SI 414: 1982 (1984)'') SI 1227 Part 1 - 1988 1999 (')

SI 1227 Part 2 - 1990 ['I

Weight of building materials and structural parts Loads on structures: Characteristic lodds Characteristic loads In buildings. Wind loads Loads on bridges: Highway bridges Loads and geometrical requirements for bridges: Railway bridges

Earthquake resistance SI 41 3: 1 995 (1 998) (')

Steel structures SI 1225 Part 1 - 1998"'

Design provisions for earthquake resistance of buildings

Steel structures code: General

Aluminium structures None

Concrete structures SI 466 Part 1 - 1987 (1997) ('I SI 466 Part 2 - 1979 (1996) U) SI 466 Part 3 - 1987 (1995) (') SI 466 Part 4 - 1991 (1999) SI 466 Part 5 - 1987 (,) 1996 ) SI 940 - 1988 (1 993)

Concrete Code: General principles Concrete Code: Concrete Code: Prestressed conc ete Concrete Code: Concrete Code: Foundations for buildings

Reinforced and urbreinforced concrete structures

Precast concrete b lemenk and structures Precast prestress& hollow core slab floors

Masonry structures None

limber structures None


Regulatory Body Building Regulation Coordination Unit PO Box 6158, Hakiria. Kaplan 2, Jerusalem 91061 Tel: 972 2 6701450 Fax: 972 2 6701633 . E-mail: [email protected]

Notes (1) The standard is under revision. In brackets is written the date when the last correction to the standard was published.

The Israeli standards published by SI1 have a voluntary status. The statusd the standards can be changed to mandatory. either by decree that they are official standards or by their reference in secondary ldgislation (decrees or regulations) of government ministries.

0 BSI 2001 Aug-Ol


IVORY COAST

National Regulations There are no national regulations or codes. Documents covering Public Works make reference to ‘RBgles del I’art‘ (state of the art). This is not formalised in any document French codes are mainly used (see below)

Standards

Loading Ri?gles Neige et vent

Earthquake resistance none

Rules MI 65. Rules defining the effects on buildings of snow and winds and appendices.

steel structures none

Alumlnlum structures none

Concrete structures BAEL 91

Rhgles BP


Technical Rules For The Design of Reihforced Concrete Structures According to the Limit States Method Technical Rules for the Design of Prestresshd Conaete. Rules BPEL 91

Tlmber structures none

Acceptable Foreign Standards International and French Standards are acceptable and widely used in Ivory Coast

Regulatory Body

Notes The above informaiton was received from the Engineer of Public lkorks at Codlnorm

0 BSI 2002 Jan-2002


JAPAN

National Regulations The Building Standard Law of Japan (BSL) (Japan's building code)

Standards Loading

See notes

Earthquake resistance See notes

Steel structures See notes

Concrete structures See notes

Timber structures See notes

Acceptable Foreign Standards The new Japanese Building law is a Performance based code therefore mponents can be made to any standards if the completed building satisfies the performance criteria for structural safety, fire

Regulatory Body Ministry of Construction Housing Bureau Building Guidance Division Tel: +81 3 3580 431 1 Fax: +81 3 3580 7050

Notes Information expected from the authority will be included in next update.

0 BSI 2001 Sep-00


National Regulations SNIP KP 23-02-00 SNIP KP 20-01-00 SNIP KP 2.01.02-94 SNIP 22-01-96 KP SNIP 11-7-81 SNIP 22-01-96 SNIP 2.01.1590

SNIP 11-23-81 SNIP 111-ia75 SNIP 2.03.06-a5 SNIP 2.03.01-84 SNIP 2.03.02-86 SNIP 2.03.03-85 SNIP 2.03.04.84

SNIP 11-22-81 SNIP 111-24-75 SNIP 11-2580

Standards Loading GOST 7076-87 (CTC3B 4923- 83) GOST 23337-78 (CTC3B 2600- 80) Earthquake resistance

Steel structures KMC 21 .15.004-96 GOST 23682-79

GOST 2404594 GOST 26047-83 Aluminium structures GOST 22233-93 GOST 24767-81

Concrete structures GOST 13015.0-83 Masonry structures KMC 21.60.01-00

CT C3B 4417-83 GOST 24992-81

Timber structures GOST 4981-87

KYRGYZ REPUBLIC

Building Wind and ice loading on wires, cables and support air lines Earthquake resistant construction in s ismlc areas.

Geophysics of dangerous Engineering protection of

Construction in seismic areas

Basic design rules. Steel structures Metal structures Aluminium structures Concrete and reinforced concrete s Dense silicate plain concrete and reqrced concrete structures Wire fabric reinforced concrete Design manual for concrete and reinfdrced concrete structures for the use oat high and extremely high temperatures I

Masonry and reinforced masonry structures Industrial furnaces and stacks Wood structures

Rating of seismic stability in existing b, t ildings

structures from dangerous geological processes.

tures

Building materials and products. Methpd of thermal conductivity determination

Noise. Methods of noise measuremerit in residential areas and in the rooms of residential, public and community buildings

See regulations

cranes having load-

Specifications

Extruded profiles of aluminium alloys or encosure building structures. General specifications Cold bent profiles of aluminium and a1 t minium alloys for enclosure building structures. Specifications

Precast concrete structures and members

Bricks and ceramic stones Masonry structures. Method of Masonry structures. Reliability

Wooden joists


Regulatory Body

Eurocodes are not acceptable in Kyrgystan although there are plans to a e p t British, US and German Standards in the future.

State Inspection for Standardization and Metrology under the Government of the Kyrgyz Republic 197 Punilov Str Bishkek 720040 Kyrgystan Tel: +996 31 2 22 78 84

Notes SNIP documents are building regulations and standards from the former USSR. They continue to be used in Kyrgyz Republic both with and without changes. GOST standards are from the former USSR. They continue to be used in Kyrgyz Republic both with and without changes. KMC standards are state standards of Kyrgyz Republic.

0 BSI 2002 July 2002


LATVIA

National Regulations Building Law 1995 LBN 000 LBN 001 LBN 004-01 LBN 202-01

LBN 203-97

LBN 20597

LBN 206-99

LBN 207-01 LBN 214-01 LBN 302

LBN 310-97

Standards Loading


Steel structures


Concrete structures

Masonry structures

Timber structures

See above

See above

See above

See above

See above

See above

See above

The list of building codes (in force The basic statute of building

June the 2gm 1992; has amendments) from March the 1' 1992)

design Draft

Provisions for the designing of concre e and reinforced concrete structures (approved by regulations Nr. 451 of December the 3" 1997 of the CM; in force from May the 1- 1998) Provisions for the designing of mason and relnforced masonty structures (approved by regulations Nr. 139 of April the 21- 1 8 of the CM; in force from May the 1" 1998) Provisions for designing of timber stru res (approved by regulations Nr. 140 of April the 13m 1999 of the CM; in force from July the 1- 1999) Geotechnics and foundations of cons ction works Draft document Designing pmvisions for pile foundati ns Draft document Regulations for the procedure of the ntrol of production and quality assessment of building materials and construction products, rovided by enterprises (in force from April the lp 1991) Regulations for content and drafting nditions of the design of performance of construction (approved by regulations Nr. 221 of J i ne the 25m 1997 of the CM; in force from July the 1-

document

1 997)

Acceptable Foreign Standards Structural Eurocodes currently adopted LVS ENV 1991-2-1: 2000 LVS ENV 1991-2-7 2000 LVS ENV 1991-3 2000 LVS ENV 1992-2: 2000 LVS ENV 1993-2: 2000 LVS ENV 1994-2: 2000 LVS ENV 19952 2000

In the future it will be possible to design after national Standards of Scandinavian countries in cases where there is neither Latvian regulations or CEN standards. (See below)

Basis Of Design And Actions On Basis Of Design And Actions On Basis Of Design And Actions On Design Of Concrete Structures - Design Of Steel Structures - Bridg Design Of Composite Steel 8 Con Design Of Timber Structures - Bridg

tructures - Bridges

Regulatory Body Ministry of Environmental Protection and Regional Development (MEPRD) Peldu Str 25, Riga,

Latvia LV-1494,

Tel: +371 7026461. +371 7026462 Fax: +371 7820442

Notes

Latvia is in the process of changing these. During the transition phase up Estonia, with the technical assistance of neighbouring Scandinavian cOun

At present many LBNs cite Russian Snip Standards.

Eurocodes and other European Standards and IS0 standards.

0 BSI 2001 Aug-Ol


LITHUANIA


Technical Regulations:- STR 106.01: 1999 Assessment of the construction project and the structur STR 1 02.04: 1999 Certification of the enterprises responsible for assess$nt of structures STR 1.02.03: 1997 Certification of design and construction enterprises STR 1.01.01 : 1996 The system of normative documents applied in the field of construction, their drafting and approval

STR 2.01(1): 1999 Essential requirements for structures. Mechanical resis ance and stability STR 2.01.01(6): 1999 Essential requirements. Energy saving and heat co servation STR 1 .01.04: 1999 Construction products. Conformity assessment and C a marking

STR 1.1 1 .Ol : Acceptance procedure for structures

STR 1.03.02: 1999 Conformity declaration for construction products STR 1.09.01: 1996 State surveillance procedure for specific requirements In construction field

Standards Loading

Steel structures


Concrete structures LST 1512.1: 1998

LST 1512.2: 1998

LST 1512.3: 1998

LST EN 1504-1: 2000

LST L ENV 13670- 1 :2000 Masonry structures

Timber structures

Composite structures

See Eurocodes

See Eurocodes

See Eurocodes

Reinforced concrete structures. Nondestructive ethods. Determining the concrete cover, diameter and location of reinforcement bars by eans of magnetic method Reinforced concrete structures. Nondestructive esting methods. Determining the prestress of reinforcement bars measuring the fundamental Reinforced concrete s t~c tu re~ . Nondestructive k esting methods. Determination of strength according to number of steel hammer Products and systems for the protection and rep lr of concrete structures. Definitions, requirements, quality control and evaluation of c&formity - Definitions Execution of concrete structures. Part 1: Comma

uency

See Eurocodes

See Eurocodes

See Eurocodes

Acceptable Foreign Standards The following Eurocodes Eurocode I Basis of design and action on structures LST L ENV 1991- 1 :2000 LST L ENV 1991-2- 1 :2000 LST L ENV 1991-2- 2:2000 LST L ENV 1991-2- 32000 loads LST L ENV 1991-2- 4:2000 actions LST L ENV 1991 - 3:2000 LST L ENV 1991 - 4:2000 Eurocode 2 Design of concrete structures LST L ENV 1992-1- 1 :2000 LST L ENV 1992-1-2 +AC:2000 LST L ENV 1992-1-3: 2000 elements

Eurocode 1 : Basis of design and actions on strudtures. Part 1: Basis of design

Eurocode 1 : Basis of design and actions on stru+ures. Part 2-1: Actions on structures. Densities, self-weight and imposed loads Eurocode 1: Basis of design and actions on strudures. Part 2-2: Actions on structures. Actions on structures exposed to fire Eurocode 1: Basis of design and actions on strudures. Part 23: Actions on structures. Snow

Eurocode 1: Basis of design and actions on stru&res. Part 24: Actions on structures. Wind

Eurocode 1: Basis of design and actions on structures. Part 3: Traffic loads on bridges

Eurocode 1: Basis of design and actions on structures. Part 4: Actions on silos and tanks

Eurocode 2: Design of concrete structures. Part 1: General rules and rules for buildings

Eurocode 2: Design of concrete structures. Part 1-2: General rules. Structural fire design

Eurocode 2: Design of concrete structures. Part 1-3: General rules. Precast concrete and structures

0 BSI 2002 Jan-2002

LST L ENV 1992-142000

LST L ENV 1992-1 -5: 2000 and external prestressing tendons LST L ENV 1992-l-S:2001 Eurocode 3 Design of steel structures LST L ENV 1993-1- 1 +A1 +A2:2000 LST L ENV 1993-1-2:2000 Eurocode 4 Design of composite steel and concrete structures LST L ENV 1994-1-1:2000

LST L ENV 1994-1- 2+AC1: 2000 Structural flre design Eurocode 5 Design of timber structures LST L ENV 19951-1:2000 LST L ENV 1995-1-2:2000

Eurocode 2: Design of concrete structures. Part 1-4: General rules. Lightweight aggregate concrete with closed structure Eurocode 2: Design of concrete structures. part 1-5: General rules. Structures with unbonded

Eurocode 2. Design of concrete structures. Part 1-6: General rules. Plain concrete structures

Eurocode 3: Design of steel structures. Paq 1-1: General rules and rules for buildings

Eurocode 3: Design of steel structures. Paq 1-2: General rules. Structural fire design

Eurocode 4. Design of composite steel and concrete structures. Part 1-1: General rules and rules for buildings Eurocode 4. Design of composite steel and bncrete structures. Part 1-2: General rules.

Eurocode 5. Design of timber structures. Pa 1-1: General rules and rules for buildings Eurocode 5. Design of timber structures. Pat 1-2: General rules. Structural fire design

Eurocode 6 Design gf masonry structures LST L E N 1996-1-1:2000 Eurocode 6: Design of masonry structures. Tart 1-1: General rules for buildings. Rules for

reinforced and unreinforced masonry I

LST L ENV 1996-1-2:2000 Eurocode 6 : Design of masonry structures. art 1-2 : General rules. Structural fire design. LST L ENV 1996-1-3:2000 Eurocode 6 : Design of masonry structures. 1 art 1-3: General rules for buildings. Detailed rules

on lateral loading LST L ENV 1996-22000 Eurocode 6 : Design of masonry structures. Part 2: Design, selection of materials and execution

of masonry LST L ENV 1996-3:2000 Eurocode 6 : Design of masonry shctures. Part 3: Simplified calculation methods and simple

rules for masonry structures Eurocode 7 Geotechnical design LST L ENV 1997-1:2001 LST L ENV 1997-2:2001 LST L ENV 1997-3:2001

Eurocode 7: Geotechnical design. Part 1: Eurocode 7: Geotechnical design. Part 2: Eurocode 7: Geotechnical design. Part 3:

Eurocode 9 Design of aluminium structures LST L ENV 1999-1-1:2000 Eurocode 9: Design of aluminium structures. Part 1-1: General rules. General rules and rules for

buildings

Regulatory Body

Notes

Ministry of Environmental Protection

Building control is performed by State Territory Planning and Construction inspectorate under Ministry of Environmental Protection

Certification Centre for Construction Produds Linkmenu 28 2600 Vilnius Lithuania

Tel: +370 2 72 80 78 Fax: +370 2 72 80 75

A l i t of regulations and standards covering testing of construction products is available.

BSI international Survey Structural Design Codes

MALTA

National Regulations Mandatory Standards LN 47: 1988 (Ml of 1988) LN 16: 1981 (M8of 1981) LN 10: 1986 (M15 of 1986) LN 60: 1987 (M20 of 1987)

Hot rolled steel bars for the reinforce ent of concrete Steel fabric for the reinforcement of Building and Sanitary pipes in asbest i cement Polyethylene damp-proof courses for masonry

Crete


Regulatory Body

In Malta warranted architects and Civil Engineers are not bound to apply any particular Standards of Code.

Minisby for Environment Works Division, Project House, Floriana CMRO2, MALTA Phone (00356) 22141 1 Fax (00356) 234145

' URL: http:/~.magnet.mt/home/moe/hdex.html

Notes It is planned to adopt The Construction Products Directive in 2001

0 BSI 2000 sep-oo 0


MOLDOVA


SNIP w i a 7 5

SNIP 2.01.07-85 SNIP 11-23-81

SNIP 2.03.06-85 SNIP 2.03.01-84 SNIP 2.03.02-86 SNIP2.03.03-85 SNIP 2.03.04-84

SNIP 2.06.0887 NCM F.03.02-99 SNIP 111-2475 SNIP 11-2580

Standards Loading

Earthquake resistance GOST 27751-88

Steel structures GOST 3024594 GOST 2404594 Aluminium structures

Concrete structures GOST 22233-93

Masonry structures SP MD 91-26-00598 SP MD 91-026-012-98 SP MD 91-26-013-98 SP MD 91-026-01598 Timber structures

Loads and effects Steel structures Metal structures Aluminium structures Concrete and reinforced concrete stnictures Dense silicate plain concrete and reinforced concrete structures Wire fabric reinforced concrete Design manual for concrete and reinfdrced concrete structures for the use at high and extremely high temperatures Concrete and reinforced concrete s Design and calculation of masonry Tctures Industrial furnaces and stacks Wood structures

ures for hydraulic facilities

Reliability of the constructions and th$ foundations. Principle rules of the calculations

See regulations

Steel bent welded closed square and Steel sheet bent profiles with trapezoi

structures. Specifications. purpose. Specifications

Extruded profiles of aluminium alloys for enclosure building structures. General specifications

See regulations

Stones sawn from the rock for the mabonry. Technical spedfication Stones tom. Technical specification '

Ceramics pieces for town planning an organization of public services. Technical specifications Brick, ceramics, blocks, and profiles. P echnical specification.

See regulations


Regulatory Body

None

Ministry of Environment and Territorial Planning MD 2005, str. Cosmonautilor, 9 Chisinau, Moldova Tel: +373 2 22 86 08 Fax: +373 2 22 07 48 e- mail: [email protected]

Notes Moldovastandard MD 2064, str. Coca, 28. Chisinau Moldova Tel: +373 2 74 85 88 Fax: +373 2 75 05 81

SNIP Russian regulations GOST Russian Standards NCM Moldovan Construction regulations SP MD Moldovan National standards

0 BSI 2002 July 2002


NEPAL

National Regulations Nepal Building Act 1998

Standards Loading NBC 103 NBC 104 NBC 107 NBC 202 Earthquake reslstance NBC 105 NBC 203 NBC 204 Steel structures NBC 111 Aluminium structures NBC 113 Concrete structures NBC 110 NBC 201 NBC 205 Masonry structures NBC 109 Timber structures NBC 112 Other NBC 000 NBC 101 NBC 102 NBC 107 NBC 108

Occupancy load Wind load Snow load Mandatory rules of thumb: Load bearihg masonry

Seismic design of buildings in Nepal Guidelines for earthquake resistant blilding construction - Low strength masonry Guidelines for earthquake resistant bqiiding construction - Earthen buildings

Steel

Aluminium

Plain & reinfoced concrete Mandatory rules of thumb relnfoced Mandatory rules of thumb reinfoced 3 ncrete buildling without masonry infill

ncrete buildling with masonry infill

Masonry - Unreinforced

Timber

Requirements for state of the art design Materials specification Unit weight of material Fire safety Site consideration

Acceptable Foreign Standards Indian Standards, British Standards and the US Uniform Building Code are used but in an informal way at a personal level.

Regulatory Body Ministry of Physical Planning and Works Depattment of Urban Development and Building Construction Babamahal Kathmandu

Tel: +977 1 262927 Fax: +977 1 262439 Mail: [email protected]

Notes The minisby Implements these codes throughout Nepal.

0 BSI 2001 Aug-Ol


NEW ZEALAND

National Regulations Building Regulations 1992 contain the mandatory New Zealand Building Code

Standards Cited in non-mandatory Approved Document Loading NZS 420x1 984 8 1992 Earthquake resistance NZS 421 9: 1983 Steel structures NZS 3404: Part 1: 1992 Concrete structures NZS 3101: Part 1: 1995 Timber structures NZS 3603: 1993 NZS 36O4:1999

Aluminium structures ASlNZS 1 664.1 : 1 997 AS/NZ 1664.2: 1997 Masonry structures NZS 4230: Part 1: 1990

NZS 4230: Part 2: 1990 NZS 4210: 1989 NZS 4229: 1999 Earth Structures NZS 4297:1998

General structural design and design Ikadings for buildings

Specification for seismic resistance of engineering systems in buildings

Steel structures standard

The design of concrete structures

Timber structures standard Timber framed buildings

Aluminium structures-Limit state desigp Aluminium structures - Allowable stresb design

Code of practice for the design of ma ! nry structures - Specifies minimum requirements for the design of masonry buildings and otheTmasonry structures Commentary on Part 1. Code of practice for masonry Concrete masonry buildings not

and workmanship engineering design

Engineering design of earth buildings

Acceptable Foreign Standards A number of foreign standards are cited in the Approved Documents.

Regulatory Body Building Industry Authority Greenock House 39 The Terrace

Wellington New Zealand

PO BOX 11 -846

Telephone: 04471 0794 Toll-frbe: 0800 242 243 Facsi$ile: 04471 0798 Email' [email protected] www.dia.govt.nz

Notes

voluntary.

The Territorial Authorities administer the Act and Regulations within their krritories by: issuing project information memoranda

issuing code compliance certificates

approving or refusing building consent applications within prescn ed time limits

issuing compliance schedules and recording building warrants ofj fitness enforcing the provisions of the Building Act, the Building Regula ons and the New Zealand Building Code maintaining records of building information and making them av I rlable to the public.

granting or refusing waivers or modifications of the Building Cod t

Owners have the choice of employing a Building Certifier to check plans a d specifications at building consent stage and perform inspections during construction.

Accreditations (approval of specific products, systems, or methods) are carried out by the BIA on receipt of an appraisal from a suitably qualified and independent appraiser.

0 BSI 2002 July 2002


PHILIPPINES


The National Building Code of the Philippines (NBCP) and its lmplementinp Rules and Regulations.

Standards National Structural Code of the Philippines (NSCP) Volume 1 - Buildings, Towers, and Other Vertical Structures Fourth Edition, 1992

(Acceptable Reference: Guide on Earthquake Resistant Design of Buildings by the Association of Structural Engineers of the Philippines 1991 - ASEP Guide)

Structure Design NSCP Vol. 1: Chap. 1:1992 SEP Guide: Part 1, Chap. 31991

Loadi n gs NSCP Vol. 1: Chap. 2:1992

ASEP Guide Part 1: Chap.21991

Earthquake Resistance ASEP Guide: Part 1, Chap. 1:1991 ASEP Guide: Part 2, Chap. 4:1991 ASEP Guide: Part 2, Chap. 5:1991

Foundation NSCP Vol. 1: Chap. 7:1992 NSCPVol. 1: Chap. 8:1992

Steel Structures NSCP Vol. 1: Chap. 4:1992 ASEP Steel Handbook: Part 1: 1994 ASEP Steel Handbook: Part 2: 1994 ASEP Steel Handbook: Part 3: 1994 ASEP Steel Handbook: Part 4: 1994 ASEP Steel Handbook: Part 5: 1994 ASEP Steel Handbook: Part 6: 1994 ASEP Steel Handbook: Part 8: 1994

Concrete Structures NSCP Vol. 1: Chap. 5: 1992

Masonry Structures NSCP Vol. 1: Chap. 6: 1992

Timber Structures NSCP Vol. 1: Chap. 3: 1992

Code of Practice for Structural Design of Buildings (4s referral Code of NBCP)

Design guide for seismjc design of buildings as per provisions of the 1992 NSCP

Requirements

Minimum Design Loada and Lateral Forces for Buildings and Other Related Structures Lateral Forces

Introduction to Earthqu ke Resistant Design Recommended Structu L I Detailing Practices Structural Systems

Excavations, Foundatiqns and Retaining Walls Grading and Earthworkk

Steel 8 Metal Built-up Shapes Cold-Formed Plate Shapes Cold-Formed Light Gage Shapes Rolled Shapes Metal Decks Steel Flat Products Welded Joints

Concrete

Masonry

Wood

Acceptable Foreign Standards A. B. C. ASTM Standards D. Uniform Building Code (UBC) E. British Standards (BS) F. Japanese Industry Standards (JIS)

Building Code Requirements for Structural Concrete American Concrete Institute (ACI-318) American Institute of Steel Construction (AISC Manuals)

0 BSI 2002 July 2002


Regulatory Body

Department of Public Works And Highways (DPWH) Bonifacio Drive, Port Area, Manila, Philippines Tel. No.: (+632) 304-3000

Department of Interior and Local Government (DILG) A. Francisco Gold Condominium 11, EDSA corner Mapagmahal SI., Brgy. PiRahan, Diliman, Quezon City, Philippines Tel.: (+632) 920-3513

Fax : (632) 925-0332

Notes

Building permits are secured prior to construction. Permits are issued by Local Building Officials (LBOs). LBOs enforce the provisions of the NBCP and its referral $odes. LBOs are under the administrative supervisions of the Local Authorities who are in tum under the DILG. DPWH develops the NBCP and its implementing rules and regulations and has appellate jurisdiction over the decisions of the LBOs made pursuant to the provisions of the NBCP.

FAX NO.: (632) 304-3017

(632) 925-0320 to 23

July 2002 0 BSI 2002


POLAND

National Regulations Ustawa - Prawo Budowlane (The law on building and entered into force on 1 Jan. 1995. published in the (XI

Standards Foundations PN-811B-03020 PN-80/8-03040 PN-83/B-02482 Actions of Building Structures PN-82/ 8-02000

PN-82/ 8-02001

PN-82/ 8-02003 Loading PN-80/ 8-02010

PN-86/ 8-02015 PN-87B-02013 PN-8W 8-02014 Steel structures PN-90/B-03200 PN-93/B-03201 PN-B-03202:1996

PN-79B-03204 PN-B-03205:1996 PN-B-03206:1996

PN-B-062003997

PN-77/ 8-0201 1

PK78B-03203

PN-8yB-03215

PN-63/B-06201 PN-80/B-03203 PN-89/S-10050 PN-82/S-10052 Aluminium structures

Concrete structures PN-64B-03320

PN-7VB-06280

PN-89B-03262 PN-87B-03263

Masonry structures PN -87/8-03002 PN-67/B-03005

Timber structures PN-81B-03150.00 PN-81/B-03150.01 PN-81/&03150.02 PN-81/B-03150.03 Composite structures PN-89/B-03340

PN-86/B-03301 PN-82/B-03300

Principles of the establishment of values. Contains 25 terms with their definitio$s related to actions on buildings. Permanent actions. Describes NIB for determination of jctions by construction deadweight, ground weight and actions by Initial construction prestre sing. Variable actions during construction t nd assembling.

Loads on building structures. Loads on building structures. Loads on building structures. Loads on building structures. loads. Atmospheric iceloads Loads on building structures.

loads. Temperature loads.

Steel structures. Static calculation anP design rules.

Steel structures. Bridges. Design.

Aluminium structures. Static calculatipn and design

Structures of large size precast reinwrced concrete elements. Code of practice and acceptance Concrete tanks for storing granular aterials and silages. Static calculation and design. Concrete. reinforced and prestress A concrete made of lightweight aggregate copncretes. Static calculation and design Concrete, reinforced concrete and prgstressed concrete structures. Static calculation and design I

Concrete and reinforced concrete wop. Post-tensioned prestressed concrete structures. Specifications and acceptance tests

Brickwork and reinforced concrete dmneys. Static calculation and design rules Masonry structures of brick and othed small sized components with reinforcement. Static calculation and design.

Timber and wood based material s ctures. Static calculation design. General rules Timber and wood based material s ctures. Static calculation design. Materials Timber and wood based material s ctures. Static calculation design. Constructions Timber and wood based material s ctures. Static calculation design. Joints

Composite masonly structures. Statiq calculation and design. Steelconcrete composite structures. IComposite thick-section beams Steelconcrete composite structures. 'Static calculation nd design. Composite columns

0 BSI 2000 Sep-00

Acceptable Foreign Standards Foreign structural designs (including Eurocodes) are not acceptable in Poland.

Regulatory Body Ministershvo Spraw wewnetrznych I Administracji (Ministry of Interior Departament Budownichva, Architektury, Geodezji I Kartografii (Dept Architecture, Geodesy & Cartography) UI. Wspolna 2/4 00-926 warszawa

Tel: +4a 22 661 80 37 Fax: +4a 22 621 38 72

Director: Stanislaw Zieleniewski

Notes Building material for sale or use in Poland must carry either "6-certificate or a certificate of approval according to Polish tsciinical standards. From: Polskie Centrum Badan i Certyfikacji, PCBC ul. Klobucka 23A 02-699 Warszawa

Tel: +48 22 647 10 71 Fax: +4a 22 s42 12 22


ROMANIA


Standards Actions upon structures STAS 1010110 : 1975

STAS 1010110A : 1977

STAS 10101lOB : 1987 Loading STAS 10101120 : 1990 STAS 10101121 : 1990 STAS 10lOlll : 1978 STAS 1010112 : 1975

STAS lOlOV2Al : 1987 STAS 10101/2A2 : 1978 STAS 10101123 : 1975 a STAS 10101123A : 1978 Earthquake resistance STAS 91 65: 1972 STAS 931 511 : 1 980 STAS 1110011: 1977 Steel structures STAS 1010376 STAS 76710-88 STAS 101 ONO-78 Concrete structures STAS 101 02-75

STAS 101 0710-90

STAS 101 0711 -90

STAS 665711 -89

Masonry structures STAS 10104-83 limber structures SR EN 338: 1997 SR EN 380: 1996 SR EN 383: 1996

a SR EN 408: 1996

SR EN 409: 1996

SR EN 595: 1997

SR EN 596: 1997 SR EN 789: 1998

STAS 8 5 ~ 1

Prefabricated structures STAS 857-83

STAS 9581-87

Classification and combination of actiqns.

(Together with STAS 1010110

Action of the wind. Snow loads. Technical weights and dead loads. Loads due to the exploitation process: (Supersedes STAS 506:1971) Technological loads for non-industrial, industrial and agrozootechnical buildings Actions due to the exploitation proms$. Loads due to overhead travelling cranes. Loads due to external temperature. (Partially supersedes STAS 946:1956] Loads due to the external temperaturei on non-industrial and industrial structures.

General Design rules for construction In seismic zones Equipment for chemical and petrocherhical Industry. Seismic actions Seismic zones. Zones of Romania

Steel construction. Basic design Civil, Industrial 81 Agricultural constru on. Steel construction. General quality requirements Civil, Industrial 8 Agricultural constru on. Design of steel elements

Concrete construction. Reinforced and prestressed concrete. Basic requirements for design and selection of components Clvil. Industrial 8 Agricultural construc$on. Design specification for structural elements of reinforced and prestressed concrete Civil, Industrial 8 Agricultural construdon. Blocks of reinforced and prestressed concrete. General design specification. Concrete prefabricated elements. Relhforced and prestressed concrete. General quality requirements.

Masonry construction. Elementary structural deslgn

Structural Timber - Strength classes Timber Structures - Test methods - General principles for static load testing Timber structures - Test methods - Dekermination of embedding strength and foundation values for dowel type fasteners Timber structures - structural timber apd glued laminated timber - Determlnation of some physical and mechanical properties Timber structures - Test methods - Ddtermination of the yield moment of dowel type fasteners - Nails Timber structures - Test methods - T q t of trusses for the determination of strength and deformation behaviour Timber structures - Test methods - Soft body impact test of timber framed walls Timber structures - Test methods - Dqermination of mechanical properties of wood based panels Timber construction. Design methods Timber elements and parts for construction. Classification and quality requirements.

Civil. Industrial 8 Agricultural construction. Design with prefabricated parts. Classification., Specification, Technical drawlngs

Acceptable Foreign Standards EN adopted standards listed

0 BSI 2000 Sep-00

Regulatory Body State Inspection in Building Construction, Public Works, Town planning and Territprial Planning Inspeqia de stat In Construqii, LucrBri Publice, Urbanism gi Amenajarea Teritoriului (ISCLPUAT) Str. Apolodur nr. 17 Sector 4 BucureSti

Tel: +40 1 336 85 74 Fax: +40 1 336 85 18

Notes Product certification carried out by:

Romanian Register for Building Construction Machinery and Equipment Registrul RomBai Maginitor si Echipamentelor Tehnologice de Construcfii Soseaua Pantelimo,, nr. 266 Sector 2 73559 Bucuregti, CP 3-33

tel: +4C 1 255 0'7 341255 04 72 fax: +40 1 255 14 20


RUSSIA

National Regulations Over 200 building codes and nearly 8000 standards and guidelines make up the Building Regulations in Russia.

Foundations SNIP 2.01.09-91 SNIP 2.02.01-83 SNIP 2.02.02-85

TSN 50-301-96 SNIP 2.02.04.88

TSN 50-302-96

Loading SNIP 2.01.07-85 SNIP 2.02.05-87 SNIP 2.06.04-82 SNIP 3.03.01-87

Buildings and structures on underworking and subsiding soils Foundation beds for buildings and sWctures Pile foundations Beds and foundations on permafrost oil Design of foundation beds and foundTtions for buildings and structures constructed in areas with permafrost soil Construction of foundations for civil b ' ildings and structures located in the Metropolitan area administered by the city of St PetersbLrg

Loads and effects Foundations for machinery producing impact load Loads and effects arising on hydraulid structures from Seaway, Ice, and Vessels Loadbearing structures and enclosures

TSN 20-301-97 Snow loads- Earthquake resistance SNIP 11-7-81 Construction in seismic areas Steel structures

Alumini urn structures

Concrete structures

SNIP 11-23-81

SNIP 2.03.06-85

SN 51 1-78 SNIP 2.03.01-84 SNIP 2.03.02-86 SNIP 2.03.04-84

Masonry Structures

Timber Structures

Other Structures

SNIP 11-22-81

SNIP 11-25-80

SN 428-74 SN 497-77

SNIP 2.03.09-85 SNIP 2.06.01-86 Cfl53-101-98

Steel structures


the use at high and extremely high temperatures

Masonry and reinforced masonry struktures

Wood structures

Guidelines for the design, installation and maintenance of structural glass shapes. Interim guidelines for the design, eredtion. and maintenance of air-supported pneumatic structures Asbestos-cement structures Hydraulic structures - Basic design prpvisions Regulations for designing and quality $control for steel constructions in buildings

Standards

Acceptable Foreign Standards See above

With the exception of a few areas covered by International conventions I ternational and foreign standards are not recognized and cannot be officially used in Russia unless adopted by the appropriate aut 1 ority.

Regulatory Body Gosstroy - The State Committee for Construction Gosstroy VNllNTPl : Russia, 125047, Moscow, I-st Tverskaya-Yamskaya St.. 6. Tel: +7095 133-1281/+7095 131-3965 1+7095 133-0771. http://www.gosstroy.ru E-mail: [email protected]

0 BSI 2002 July 2002


Notes SNIP Regulatory Information Services Provides information on industry standards, technical regulations, and conformity assessment programs adopted in Russia and CIS states. They also provide procurement, distribution and translation of the regulatory and technical documentation. SNIP can be found at http://www.snip.com/general/index. html

Gosarkhstroynadzor Federal Inspection Agency for Architecture and Construction Has offices in every municipality and inspects construction projects from (he design phase through to completion and acceptance for compliance with building codes and standards and makes sure that the designers and contractors specify and use approved building products, materials, and equipment.

Gosexpertiza State Interdepartmental Quality Assessment Agency This organization works for the local administrations to provide independent assessment of construction projects for compliance with national and local regulations.

0 BSI 2002 July 2002


SINGAPORE

National Regulations Building Control Act (revised edition 30/12/1999) Building Control Regulations (Revised edition 31 .1.2000)

Standards Loading

Building Control Regulations (based oh BS CP 3) Earthquake resistance

None Steel structures SS2: Part 1 : 1999 SS2 Part 2 1999 SS2 Part 3 1987 SS18 Part 1: 1999

SSl8 Part 2: 1970 SS 32 : Part 1 : 1999 SS 32: Part 2 : 1986 SS 427 : 1998 SS 475:- Part 1 : 2000 (IS0 6934-1 : 1991) SS 475:- Part 2 : 2000 (IS0 6934-2 : 1991) SS 475:- Part 3 : 2000 (IS0 6934-3 : 1991) SS 475:- Part 4 : 2000 (IS0 6934-4 : 1991) SS 475:- Part 5 : 2000 (IS0 6934-5 : 1991) Concrete structures CP 65 Part 1: 1999 CP 65: Part 2: 1996 CP 73: 1998 CP 81: 1999 Masonry structures None specified limber structures ss CP 7 Miscellaneous

e

CP 11: 1992 CP 24: 1999 e CP 57 : 1991

Steel for reinforcement of concrete - P ain bars (steel grade 300) Steel for reinforcement of concrete - dbbed bars (steel grade 5000) Hot rolled steel bars for the reinforce ent of concrete Cold reduced steel wire for the reinfoqament of concrete and the manufacture of welded fabric - Part 1: Steel grade 5000

Steel for the prestressing of concrete Colddrawn wire

Quenched and tempered wire

Strand

Hot-rolled steel bars with or without subsequent processing

Code of practice for structural use of ncrete. Design and construction Code of practice for structural use of Tncrete. Special drcumstances Code of practice for design of concrete structures for retaining aqueous liquids Code of practice for concrete slab and'wall panels

Code of practice for the structural use of timber

Demolition Code of practice for energy efficiency ' tandard for building services and equipment Setting out of building and civil engin J ring works

Acceptable Foreign Standards CP 118: For aluminium structures BS 5400 BS 5950: For steel structures BS 8002 Earth retaining structures BS 8118

Steel, Concrete and composite bridges

Structural use of aluminium

Regulatory Body Building 8 Construction Authority Building Control 5 Maxwell Road #l W O MND Tower Block Singapore 0691 10

0 BSI 2001 Aug-Ol e


SLOVAKIA

National Regulations Code No 5011976 Zb. Layout planning and documentation and building oryer Code No 90/1998 Zz Construction products (This law is based on the Construction Products Directive 89/106/EEC)

Standards STN 73 0035 STN 73 6203 STN 73 0038 Foundations STN 73 0031 STN 73 0033 STN 73 1000 Loading STN 73 0032 STN 73 0037 Earthquake resistance

Steel structures STN 73 1401 STN 73 1500 Aluminium structures

Concrete structures

Timber structures STN 73 1701 Composite structures STN 73 1206

STN 73 0036

STN 73 1590

STN 73 1201

Actions on structures Actionsonbridges Design and assessment of building sWctures subjected to reconstruction

Reliability of building constructions an foundation soils. Basic specifications for calculation Reliability of structures and subsoils. 4 ask requirements for action and effects Foundations of buildings and structures. Basic design requirements

Calculation of building structures loaded with dynamic effects of machines Earth pressure acting on structures

Seismic loading of building constructiohs

Design of steel structures Steel structures. Basic requirements f i r calculation

Aluminium structures. Basic requirements for calculation



Composite steeVconcrete structures. easic requirements for design

Acceptable Foreign Standards The following Eurocodes are in use in Slovakia:

Eurocode 1 Basis of design and action on structures STN P ENV 1991-1 STN P ENV 1991-2-1 STN P ENV 1991-2-2 STN P ENV 1991-2-3 STN P ENV 1991-3 STN P ENV 19914 Eurocode 2 Design of concrete structures STN P ENV 1992-1-1 STN P ENV 1992-1-3 STN P ENV 1992-1 4 STN P ENV 1992-1 -5 STN P ENV 1992-1-6 STN P ENV 1992-2 Eurocode 3 Design of steel structures STN 73 1402 STN 73 1403 STN 73 1404 STN 73 6205

Eurocode 4 Design of concrete structures

Eurocode 6 Design of masonry structures STN 731 101

Design of light gauge cold-formed steel Design of hollow sections In steel struct Design of steel hydrotechnical structure Design of steel bridge structures, etc.

STN P ENV 1993-1-1

STN P ENV 1994-1 -1

Design of masonry structures STN P ENV 19961-1 STN P ENV 19961-2 Eurocode 7 Geotechnical Deslgn STN P ENV 1997-1

0 BSI 2002 July 2002


Eurocode 8 Design provisions for earthquakes and geotechnlcal aspects STN P ENV 1998-1-1 STN P ENV 1996-1-2 STN P ENV 1998-1-3 STN P ENV 1998-2 STN P ENV 1998-5

Ministerstvo *stavby a regioalneho rosvoja Slovenskej republiky (MVRR 6R) Ministry of Construction and Public Works Spitalska 8 816 44 Bratislava

Regulatory Body

Notes TSUS - Civil Eng. Technical and Testing Institute Studena 3 826 34 Bratislava Slovakia

To register construction products:- Ing. Rudolf Kyska Ph.D, Technical Director Tel: +421 7 49228 120 Fax: +421 7 4445 3617 e-mail: [email protected]

0 BSI 2002 July 2002


SLOVEN IA

National Regulations Zakon o graditvi objektov (Construction Law) Official Gazette SFRJ no. 34/84 alterations SRS 29/86, SFRJ 83/89, SRSI 5/90, RS 10191 Loading Rules on technical norms for the loading of loadbearing construction build ngs ((Uradni list SFRJ 52/85) Rules on technical norms for the basing of buildings (Uradni list SFRJ 154 ) Rules on technical norms for defining the extent of loads on bridges (Ura b ni lisr SFRJ 1/90) Earthquake resistance Rules on technical norms for building constructions in seismic areas (Uradne list Officia Gazette SFRJ31/8l1 49/82, 29/83.21/88 in 52/90) Steel structures Rules on technical norms for load bearing steel structures (Uradnl list SF ,61/86) Rules on technical regulations concerning dimension and form tolerances for load bearing steel structures (Uradni list SFRJ, 41/64) Rules on technical regulations concerning quality of welds for load bearin steel structures (Uradni list SFRJ, 41/64) Rules on technical regulations concerning lightweight steel constructions i load bearing steel structures (Uradni list SFRJ. 6/65), Rules on technical regulations concerning inspection and testing of load b ring steel structures (Uradnl list SFRJ, 6/65) Rules on technical regulations concerning simple building constructions i load bearing steel structures (Uradni list SFRJ, 6/65) Rules on technical regulations for the actions of wind on loadbearing stee 1 structures (Uradni list SFRJ 41/64) Concrete structures Rules on technical norms for concrete and reinforced concrete (Uradni lis SFRJ 11/87)

SFRJ 15/90) Rules on technical norms for the design, production and execution of structures with prefabricated elements of non-reinforced and reinforced from autoclaved aerated concrete (Uradni list SFRJ 14/89)

Rules on technical norms for concrete and reinforced concrete mixed with 9 natural or artificial lightweight aggregate fill (Uradni list

Standards Timber structures' SIST EN 380: 1996 SIST EN 383: 1996

SIST EN 408 1996

SIST EN 409: 1996

SIST EN 594: 1996 SIST EN 595: 1996

SIST EN 596: 1996 SIST EN 789 1996

SIST EN 1059: 2000

SIST EN 1075: 2000 SIST EN 1193 2000

SIST EN 1194: 2000

SIST EN 1195: 2000 SIST EN 1380: 2000 SIST EN 1381: 2000 SIST EN 1382 2000 SIST EN 1383: 2000 SIST EN 26891 : 1997

SIST EN 28970: 1997

Timber structures - Test methods - G 'neral principles for static load testing Timber structures - Test methods - D?termination of embedding strength and foundation values for dowel type fasteners Timber structures - Structural timber ahd glued laminated timber - Determination of some physical and mechanical propertles Timber structures - Test methods - D&rminationa of the yield moment of dowel type fasteners - Timber structures - Test methods - Timber structures - Test methods - Nails

behaviour Timber structures - Test methods - Timber structures - Test methods - panels Timber structures - Product requiremepts for prefabricated trusses using punched metal plate fasteners Timber structures - Test methods - made with punched metal plate fastener

density (IS0 8970:1989)

0 BSI 2000 Sep-00

Acceptable Foreign Standards The following Eurocodes are in use in Slovenia ENV 1991 Basis of design and action on structures SIST ENV 1991-1: 1998 SIST ENV 1991 -2-1 : 1998 SIST ENV 1991-2-3: 1998 SIST ENV 1991-2-4: 1998 SIST ENV 1991-3: 1991 ENV 1992

ENV 1993


Design of steel structures SIST ENV 1992-1-1: 1999

SIST ENV 1993-1-1: 1996 SIST ENV 1933-1-1/Al:1996 SIST ENV 1993-1-2: 1999 ENV 1994

ENV 1995

ENV 1998

Design of composite steel and concrete structures


Design for provisions for earthquakes and geotechnical aspects

SIST ENV :994-1-1:1998

SIST ENV 1995-1-1:1998

SIST ENV 1998-1-1:2000 SIST ENV 1998-1-1:1995 SIST ENV 1998-1 -2: 1995 SIST ENV 1998-1-3:1995 SIST ENV 1998-1-3:2000 SIST ENV 1998-1-4:2000 SIST ENV 1998-2:1995 SIST ENV 1998-5:1995

Regulatory Body Ministry of Environment and Physical Planning Dunuska cesta 48 SI-1000 Ljubljana

tel.: (+ 383) 1 478 7400 Fax: +386 2 478 7422 www.sigov.si/mop/

Notes National Construction Inspectorate Parmova 33, 1000 Ljubljana 1386 1 232 32 58 +386 1 231 08 40 Acting Chief Construction Inspector: Angelca Cepelnik E-m4: [email protected]

‘The SIST EN documents are identical to their European counterparts.


SOUTH AFRICA

National Regulations National Building Regulations Act No 103 of 1977, as amended National Homebuilders Registration Council (NHBRC) Home Building Manual Part 1: 1999 General Requirements Home Building Manual Part 2 1999 Design Standards Home Building Manual Part 3: 1999 Construction standards

Standards Buildings SABS 0400: 1990 SABS 0401: 1989 Foundations SABS 0161 : 1980 Loading SABS 0160 : 1989 Steel structures SABS 0162 - Part 3: 1984 SABS 01 62 - Part 2 1993 SABS 0162 -Part 1: 1993 Concrete structures SABS 0100-Part 1: 1992 SABS 0100-Part 2: 1992

e

The application of the National Buildiqg Regulations The construction of dwelling houses 14 accordance with the National Building Regulations

The design of foundations for buildin@

The general procedures and loadings, to be adopted in the design of buildings

The structural use of steel. Allowable tress design steelwork The structural use of steel. Limit-sat4 design of cold-formed steelwork The structural use of steel. Limit-state design of hot-rolled steelwork

The structural use of concrete. Design The structural use of concrete. Materials and execution of work

Masonry structures SABS 0164: Part 1: 1980 SABS 0164: Part 2 1992

Timber structures SABS 0163: Part 1: 1994 SABS 01 63: Part 2: 1994

The structural use of masonry. Unrein rced masonry walling The structural use of masonry. Struct&l design and requirements for reinforced and prestressed masonry

The structural use of timber. Allowabl The structural use of timber. Limit-sta

Acceptable Foreign Standards A competent person such as someone registered by the Engineering Cou)’Icil may opt to use a foreign building design code thus producing a ‘relational design’ as defined in the terms of the National Builging Regulations.

Regulatory Body Department of Trade and industry Private Bag X84 Pretoria South Africa 0001

e Notes National Home Builders Registration Council P 0 Box 461 RANDBURG 2125 Tel: (01 1) 886 3636 Fax: (01 1) 781 214

Any innovative designs not referenced in the Building Regulations requirejapproval from:- Agrhent South Africa CSlR , P 0 Box 395 PRETORIA 0001 Tel: (012) 841 370W3711 Fax: (012) 841 2539

Construction Technology

0 BSI 2000 Sep-00


TURKEY

National Regulations Specification for structures to be built in disaster areas Part 3 - Earthquake Disaster Prevention (Issued 2.9.97, Official Gazette No 23098 Effective from 1 .1.1998 Amendk on 2.7.98. Official Gazette No 23390)

Standards TS 1914: 1975 (IS0 2394: 1973 EQW TS 8024: 1990 TS 9111: 1991 Loading TS 498.1987 TS 2968 1978 (IS0 2633: 1974 EQV) TS 6793: 1989 (IS0 21 03: 1986 EQV)

General principles for the verification of the safety of structures

General principles on reliability for s ctures - List of equipment - Terms Specifications for designing residenti 4 buildings for the disabled

Design loads for buildings Determination of imposed floor load iri production buildings and warehouses

! Loads due to use and occupancy in r+dential and public buildings

TS 7b46: 1989 (IS0 4355: 1981 EQV) TS IS0 9194

Determination of snow loads on roofs

Bases for design of structures; actionq due to the self weight of structures, non-structural elements and stored materials; dansi*


a See above Steel structures TS 648: 1980 TS 3357 1979 TS 4561: 1985 TS 1 1372: 1994 Concrete structures TS 500 1984 TS 3233: 1979 TS 9967: 1992

Masonry structures TS 2510: 1977 Timber structures TS 647: 1979 TS EN 380 TS EN 1195

Building code for steel structures

Rules for plastic design of steel stru Building code for the design

Light weight steel structures

Bulldlng code requireme Building code requirements for pre-s Design construction and elements structures and buildings

reinforced and pre-stressed concrete

Design and construction methods for masonry

Timber structures; test methods; gen Timber structures - Test methods - P

Building code for timber structures principles for static load testing rmance of structural steel floor decking

Acceptable Foreign Standards The following Eurocodes have been adopted in Turkey

a

Deslgn of Concrete structures

ENV 1991

TS ENV 19914: 1996

Basis of deslgn and actlon on s!tructures TS ENV 1991-1: 1996 TS ENV 1991-3: 1996

TS ENV 1991 -2-1 : 1996 TS ENV 1991-2-2: 1996 TS ENV 1991-2-3: 1996 TS ENV 1991-24: 1996 TS ENV 1991-2-6: 1997

TS ENV 1992-1-1 : 1996 TS ENV 1992-1-2+AC TS ENV 1992-1-3: 1996 TS ENV 1992-14: 1996 TS ENV 1992-1-5: 1996 TS ENV 1992-2: 1996

TS ENV 1993-1-1+Al: 1996 TS ENV 1993-1-2: 1996 TS ENV 1993-1-3: 1996

ENV 1992

ENV 1993 Deslgn of Steel structures

TS ENV 1993-14: 1996 ENV 1994 Deslgn of composite steel and 4oncrete structures

0 BSI 2000 Sep-00

TS ENV 1994-1-1: 1996 TS ENV 1994-1-2: 1996

TS ENV 1995-l-l+AC 1996 TS ENV 19951-2 1996

TS ENV 1996-1-1: 1996

ENV 1995

ENV 1996

ENV 1997 Geo-technical Design

ENV 1998 TS ENV 1998-5: 1996

Design of Timber structures

Design of Masonry structures

TS ENV 1997-1: 1996

Design provision for earthquake resistance of structures TS ENV 1998-2: 1996

TS ENV 1998-1-1: 1996 TS ENV 1998-1-2: 1996 TS ENV 1998-1-3: 1996 TS ENV 1998-1-4: 1996

International Standards IS0 2103: 1986 IS0 2394: 1973 IS0 2633: 1974 IS0 4355: 1981

Regulatory Body Ministry of Public Works and Settlement Necatibey Cad No. 63 Kizilay Ankara Turkey

Tel: +90 312 231 72 40 Fax: +90 312 418 04 06

Loads due to use and occupancy in residentid1 and public buildings General principles on reliability for structures Determination of Imposed floor Bases for design of structures -


TURKMENISTAN

National Regulations SNIP 2.01.07-85 SNIP 11-7-81 SNIP 11-23-81 SNIP Ill-16-75 SNIP 2-03-01-84 SNIP 2-03-02-86 SNIP 2-03-03-85

SNIP 2-06-0847 SNIP 2-03-04-84

SNIP 11-22-81 SNIP 11-25-80 Standards Loading

Loads and effects Building in seismic zones Steel structures Metallic structures Concrete and reinforced concrete stru Dense silicate plain concrete and rein r rced concrete structures wire fabric reinforced concrete

res

Deslgn manual for concrete and rein concrete structures for use at high temperatures for hydraulic Structures

Wooden structures

See above Earthquake resistance

See above Steel structures

See above Alumlnlum structures

Concrete structures

Masonry structures

Tlmber structures


See above

See above

See above

See above

Regulatory Body Ministry of Construction and Building Materials of Republic of Turkmenistan Ashgabad 744000 Alishera NAVO 1 , s A6 R224

Notes Turkmenistandartlari Republic of Turkmenistan Ashgabad. 744000 A65l113

0 BSI 2001 Feb-Ol


UKRAINE

National Regulations SNIP 2.01.07-85 SNIP 11-7-81 SNIP 11-23-81 SNIP ill-18-75

SNIP 2.03.01-84 SNIP 2.03.06-85

SNIP 2.03.02-86 SNIP 2.03.03-65 SNIP 2.03.04-84

SNIP 2.06.0887 SNIP 11-22-81 SNIP 111-2475 SNIP 11-2580

Standards Loading GOST 27751 -88 Earthquake resistance

Steel structures ACTY 6 6.2.6-8-95 (GOST 3024594) ACTY 6 6.2.6-9-95 (GOST 2404594) Aluminium structures ACTY 6 6.2.6-3-95 (GOST 22233-93) Concrete structures

Masonry structures ACTY 6 6.2.6-2-95

ACTY 6 6.2.781-97 ACTY 6 6.2.7-80-98 Tlmber structures

Loads and effects Construction in Seismic areas Steel structures Metal structures Aluminium structures Concrete and reinforced concrete stru Dense silicate plain concrete and rein tf? rced concrete structures wire fabric reinforced concrete Design manual for concrete and reinforced concrete structures for the use at high and extremely high temperatures Concrete and reinforced concrete stru@~~res for hydraulic facilities Masonry and reinforced masonry strudtures Industrial furnaces and stacks Wood structures

res

Reliability of the constructlons and the foundations. Principle rules of the calculations

See regulations

Steel bent welded closed square and dectangular profiles for building structures. Specifications.

Steel sheet bent profiles with trapezoiq corrugations for construction purpose. Specifications

Extruded profiles of aluminium alloys fbr enclosure building structures. General specifications.

Reinforced concrete products. General technical requirements

Brick and ceramic facing stone. Techdcal requirements Brick and silicate bricks. Technical reqbirements

See regulations

Acceptable Foreign Standards Eurocodes are not valid in the Ukraine

Regulatory Body

TEXHI~HMA KOMITET CTAWPTM~A~IT 'SYATU(H0PMYBAHHFI' Ylcpalna, 03141, ~.Kule-141, N c 937

'Budtechnorm'

Notes SNIP: Building regulations and rules of the former USSR. They are legal i Ukraine with some corrections (or without) GOST: Standards in the former USSR. They are iegai in Ukraine with so4e corrections (or without) ACTY: Government approved (national) standards

0 BSI 2000 sep-oo


UNITED STATES

National Regulations International Bulldlng Code: 2000’. This new code supersedes the three former codes. It is effective immediately and only depends on adoption by the State jurisdictions.

Chapter 16: Structural Design Chapter 17: Structural tests and Special Inspections Chapter 1 8 Soil and Foundations Chapter 19: Concrete Chapter 20: Aluminium Chapter 21: Masonry Chapter 22: Steel Chapter 23: Wood

Standards ASCE 1 1-90 ASCE 24-98 Loading ASCE 7-98 AFBPNASCE 1695 AlSC LRFD (1993)

Earthquake resistance AlSC Seismic (1997)

Guideline for structural condition asse sment of existing buildings Flood resistance design and construc$on standard

Minimum design loads for buildings a d other structures Standard for load and resistance fad design (LRFD) for engineered wood construction Load and resistance factor design for structural steel buildings, including Supplement No. 1 Janl998

Seismic Provisions for structural steel building - including Supplement No 1 1999

Aluminium structures AA-94

AA ASM 3580 Steel structures

Aluminium Design manual: Part 1-A uminium structures, allowable stress design: and Part 1-8 - Aluminium structures, Load and resi tance factor design of buildings and similar type

Aluminium sheet metal working In buiiqing construction Structures 1 Structural steel buildings - Allowable s ess design, plastic design Specification for the Design of steel h llow structural sections Specification for design of cold-form f steel structural members

Building Code Requirements for Strudural Concrete

AlSC ASD (1 989) AlSC HSS (1997) AlSl(1996), ASCE 6-90 Concrete ACI 318:1999 and commentary

Masonry structures ACI 530:99, ASCE 599. TMS 402-99 I

ACI 530.1-99, ASCE 699. TMS 602-99

ACI 31 8R-99

Building code requirements for masoniy structures

Masonry structures

Timber structures AFBPA NDS-97 AlTC 104-84

Wood construction and supplement , Typical construction details

Composite structures ASCE 3-84


Standard for the structural design of c+mposite slabs

None. The IBC is a prescriptive Code.

Regulatory Body Department of Housing and Urban Development (HUD)’s Federal Housind Administration (FHA)

a 0 BSI 2000 Sep-00

Notes 'The International Building Code 2000 is a new Code which is designed to replace the three existing codes, namely: 1.Natlonal Bulldlng Code BOCA - The Building Officials and Code Administrators International 2.The Uniform Bulldlng Code - ICBO - The International Conference of Building Officials 3.Standard Building Codes - SBCCl - The Southern Building Code Congress International The process of adoption by each state is in progress.

The lnternabional Building Code is a stand-alone document which coordinates wi all the other 2000 International Codes including: International Plumbing Code(tm) (IPC). the International Private Sewage Disposal 7 Code(tm) (IPSDC) the International Fire Code, and the International Mechanical Code(tm) (IMC) to create a set of comprehensive performance-based guidelines for the design an4 installation of building systems.

Regulatory requirements for building are very localized in the US. Local reguiatiods are based on the Model Building Code (lac). For code compliance contact:-

.

ICBO Evaluation Service Tel: (800) 423-6587 Fax: (562) 6954694 e-mail: [email protected]

AA Aluminium Association 900-1p Street NW, Suite 300 Washington, DC 20006

AFBPA American Forest and Paper Association 1 11 1 1 Sm Street. NW Suite 800 Washington, DC 20036

AlSl American Iron and Steel Institute 1101 - lp Street, NW, Suite 1300 Washington, DC 200364700

ACI American,Concrete Institute PO Box 9094 Farmington Hills. MI 48333-9094


URUGUAY

National Regulations lntendencia Municipal de Montevideo Municipal Digest. Title I to XIV. Article R 1.625 include refers to building r6guilations

Standards Loading UNIT 50

Earthquake reslstance None

Steel structures American Standards always used.

Concrete structures UNIT 104 PU 1050: 2000

Wind actions on structures

Execution of reinforced concrete Project and executionof concrete or rdnforced concrete structures (Public enquiry)

Masonry structures No codes or technical standards

Timber structures No codes or technical standards


1984)

Regulatory Body

Structural use of concrete - Design and construction Germany) Design, calculation and execution of reinforced concr 0 te and pre-stressing concrete structures. (Argentina

Building code. Requirements for reinforced concrete (USA)

CIRSOC 201 DIN 1045

ACU 318

Ministerio de Wienda, Ordenamiento Territorial y Medio Ambiente Zabala 1432 Montevideo Uruguay

Tei: +598 2 91 6 59 26/28 Fax: +598 2 91 6 59 26/27

0 BSI 2001 Aug-Ol

UZBEKISTAN

National Regulations SNIP 11-7-81 SNIP 22-01-96 SNIP 2.01.1590

SNIP 11-23-81 SNIP 111-1875 SNIP 2.03.06-85 SNIP 2.03.01-84 SNIP 2.03.02-86 SNIP 2.03.03-85 SNIP 2.03.04.84

SNIP 11-22-81 SNIP 111-24-75 SNIP 11-25-80 KMK 2.01.09-97

Standards Loading GOST 23337-78 (CTC3B 2600- 80) KMK 2.03.10-96 KMK 2.06.04-97

KMK 2.01.07-97 Earthquake resistance KMK 2.01 .OS96

KMK 2.01.01.94 PCTY3 836-97

Steel structures KMC 21 .I 5.004-96 GOST 23682-79

GOST 24045-94 GOST 26047-83 KMK 2.03.1 1-96 KMK 2.03.0597 Aluminium structures GOST 22233-93 GOST 24767-81

KMK 2.03.0697 Concrete structures GOST 13015.0-83 KMK 2.03.04-98

KMK 2.06.08-97 KMK 2.03.01-96 KMK 2.03.02-96 KMK 2.03.09-98

Masonry structures KMC 21.60.01-00 GOST 24992-81 CT C3B 4417-83 KMK 2.03.07-98

Timber structures GOST 4981-87 KMK 2.03.08.98

Construction in seismic areas Geophysics of dangerous natural influences Engineering protection of territories, buildings\ structures from dangerous geological processes. Basic design rules. Steel structures Metal structures Aluminium structures Concrete and reinforced concrete structures Dense silicate plain concrete and reinforced doncrete structures Wire fabric reinforced concrete Design manual for concrete and reinforced concrete structures for the use oat high and extremely high temperatures Masonry and reinforced masonry structures Industrial furnaces and stacks Wood structures Temporary building constructions in gardens and relocatable cabins for builders

Noise. Methods of noise measurement in residential areas and in the rooms of residential, public and community buildings Roofs and a roofing Loadings and influences on hydraulic engineering tests of a construction (wave, ice and from Courts) Loadings and influences

Construction in seismic areas The Scale for definition of intensity of earthquake in limits from 6 up to 10 points Building climatic conditions and geophysics

Metal products. General specifications. Steel stepped columns for buildings with genqral purpose travelling electric cranes having load- carrying capacity up to 50 t. Specifications Steel sheet cold-formed sections with trapezdidal corrugations for building. Specifications Steel building structures. Conventional signs (grades) Protection of building designs against corrosibn Steel designs. Norms of designing

Extruded profiles of aluminium alloys for enclqsure building structures. General specifications Cold bent Drofiles of aluminium and aluminium allovs for enclosure buildina structures. Specifications Aluminium structure designs

Precast concrete structures and members the Concrete and ferro-concrete designs intended for work in conditions of influence of raised (increased) and high temperatures Concrete and ferro-concrete designs of hydrablic engineering constructions Concrete and ferro-concrete designs Concrete and ferro-concrete designs from dense silicate concrete Asbestos- cement designs

Bricks and ceramic stones Masonry structures. Method of estimating bo Masonry structures. Reliability of design and . Stone and designs Masonry structures

Wooden joists Wooden design structures

Acceptable Foreign Standards Eurocodes are not acceptable in Uzbekistan although there are plans to accept dritish, US and German Standards in the future. a 0 BSI 2002 July 2002


Regulatory Body Gosarhitektstroj of Republic of Uzbekistan. 70001 1, Tashkent,. Abaja street, 6, Tel: + 3712 144-07-00

Notes SNIP documents are building regulations and standards from the former USSR. GOST- standards are from the former USSR. They continue to be used in Uzbekistan both with and without changes. KMC standards are state standards of Uzbekistan Republic.

0 BSI 2002 July 2002


VANUATU

National Regulations National Building Code 2000 This is not a law but outlines performance requirements and 'Deemed-to-gatisfy Provisions'. The code was written in response to the significant threat of death and de$truction that cyclones pose for Vanuatu every summer.

The following Standards are ated in the Code. Standards Loading AS 1170-2 With local applications

Minimum design loads on structures ($AA Loading code) Part 2: Wind loads

Earthquake resistance NZS 4203 Part 1,2.3 With local applications

General structural design and design Ibading for buildings

Steel structures NZS 3404 Steel structures standard

Aluminium structures e

ASlNZS Aluminium structures

Concrete structures NZS 3101 PARTS 1&2:1995 NZS 3109:1997 Concrete construction NZS 31241987

The design of concrete structures

Specification for concrete constructions for minor works

Masonry structures NZS 4210:1989 NZS 4229: 1 999 NZS 4230

Timber structures AS 1720 Design of timber structures NZS 3603 Timber structures standard

Acceptable Foreign Standards French, British, Australian and New Zealand are the main foreign Standaas specified in contract documentation.

Regulatory Body e The Building Code was developed by a number of Government Ministries

Notes Vanuatu is subject to cyclones

0 BSI 2000 Sep-00


VIETNAM

National Regulations Vietnam construction code Construction Quality management regulation Standards Loadlng TCVN 2737: 1995 Loads and actions. Design standard [Mandatory Standard)

Earthquake resistance Building on the earthquake regions - Oesign standard (Under the writing process)

Steel structures TCVN 5575: 1991 TCXD 170:1989

Aluminium structures None listed

Concrete structures TCVN 411885 TCVN 4452-87

TCVN 4453:1995

TCVN 5574: 1 991 TCVN 51241993

TCVN 6285: 1997 (IS0 6935'2)

Maaonary structures TCVN 5573: 1991 TCVN 4085:1985 limber structures TCVN 46101988 Other TCVN 4088-97 TCVN 409185 TCVN 4252-86 TCVN 4448-87 TCVN 4449-87 TCVN 445087 TCVN 4451-87 TCVN4454-87

Steel structures. Design standard l!jOt!(A4) Steel structure - Technical requlrem~t for errection and acceptance

Hydraulic engineering concrete and inforced concrete structures. Design standard Precast concrete and reinforced con?rete structures. Code for e x d o n and acceptance 2otr(A4) Monolithic concrete and reinforced 4ncrete structures. Code for e x d o n and acceptance 50tr(M) Concrete and reinforced conaete s ctures. Design standard 96qA4) Concrete and reinforced concrete sqctures. Minimum technical conditions for e x d o n and acceptance Steel for the reinforcement of concretb. Ribbed ban. (Mandatory Standard)

Brick and stone and reinforeed brick nd stone structures. Design standard 68qA4) Mansonary structure - Spdcation dr constrction and acceptance

Timber structure - Technical requirement for design

Climatic data for constntction design Acceptance of buildings WA5) Procedure for design, organization a d execution in conshction Guide for dkttict center planning

Design standard 25qA4)

Acceptable Foreign Standards If there are no Vietnamese Standards available Standards from the foliowfng country are accepted: US, Europe, ISO, Australia. UK, France, Germany, Russia

The Ministry of Construction should a h y s be consulted before using fo ign standards for the following mandated a m : Safety of construction. loading and actions on structures. and envimnme ?t

Regulatory Body Ministry of Construction Department of Sdence and Technology 37 Le Dal Hanh. Hanoi, Vietnam

Tel: 844-97607551821 5662 Fax: 84489780676 Email: [email protected]

0 BSI 2002 Jan-2002


APPENDIX i

LIST OF WORLD-MDE STANDARlDS ORGANIZATIONS ’ ALBANIA@PS) General Directorate of Standardization “Mine Peza” Str. Nr 14313 PO Box 98 Tirana

Tel: Fax: E-mail: dscQicc. al.eu.org

+ 355 42 2 62 55 + 355 42 471 77

ALGERIA (IANOR) Institut alghien de normalisation (IANOR) 5 , rue Abou Hamou Moussa (es-rue Daguerre) B.P. 104RP Alger

Tel: +2 13 2 64 20 75 Fax: +2132641761 Email: ianor@,Wssal.dz

ANTIGUA AND BARBUDA (ABBS) Antigua and Barbuda Bureau of Standards P.O. Box 1550 Redcliffe Street St. John’s

Tel: +1268 462 15 42 Fax: +1268 462 16 25 E-mail: [email protected]

ARGENTINA Instituto Argentino de Normalizacion Peru 5521556 1068 Buenos Aires http:llwww.iram.org.arlhome-es.htm

Tel:+54 11 43 46 06 02 Fax: +54 11 43 46 06 05 E-mail: [email protected]

ARMENIA(SARM) Department of Standardization, Metrology and Certification Komitas Avenue 4912 375051 Yerevan

Tel: +374 1 23 56 00 Fax: +374 1 28 56 20 Email: [email protected]

A U S W I A (SAI) Standarh Australia International Ltd 286 S w e x St (corner of Bathmt St) Sydney, NSW 2000

Postal Address GPO. Bbx 5420

Tel: +612 82 06 60 00 Fax: +612 82 06 60 01 Emd. , [email protected]

Sydney;- NSW. 2001

A U S T (ON) Osterreichisches Normungsinstitut Heinesaasse 38 Postfacl4 130 A-1021 Wien

Tel: +43 1 213 00 Fax: Email: elisabethstampfl-blahaaon-normat

+43 1 21 30 06 50

AZERBlAIJAN (AZGOST) Azerbaijan State Standardization and Metrology Centre Mardaubv Gardashlary, 124 370074d Baku

Tel: Fa: E-mail [email protected]

+99 412 40 51 54 +99 412 40 37 98

B A “ W M D ) Directomte of Standards and Metrology minis try^ of Commerce P.O. Bod 5479 Bahrain

Tel: + 973 52 30 30 Fax: + 973 53 07 30 Email: bsmdQbaTe1:co. com.bh

BANGLDESH (BSTI) Bangladesh Standards and Testing Institution 1 161A, $ejgaon Industrial Area Dhaka 1308

Tel: + 880 2 88 14 62 Fax: + 880 2 91315 81 Email: bstiQbangla.net

JANUARY 2002

LIST OF WORLD-MDE STMDAR.@S ORGANIZATIONS

BARBADOS (BNSI) Barbados National Standards Institute “Flodden” Culloden Road St. Michael

Tel: +1246 426 38 70 Fax: +1 246 436 14 95 Email: [email protected]

BELARUS (BELST) Committee for Standardization, Metrology and Certification Starovilensky Trakt 93 Minsk 220053

Tel: Fax: Emaik belgiss@)ail.belpak.by

+375 172 37 52 13 +375 172 37 25 88

BELGIUM (IBN) Institut belge de normalisation AV. de la Brabanqonne 29 B- 1040 Bruxelles


BENIN (DPQC) Direction de la Promotion de la Qualite et du Conditionnement des Produits MA Ministere du developpement Rural B.P. 362 Cotonou Tel: +229 31 22 89 Fax: +229 31 53 76 Email: [email protected]

BOLIVIA (IBNORCA) Instituto Bolivian0 de Nonnalizaci6n y Calidad AV. Camacho Esq. Bueno No 1488 Casilla 5034 La Paz

Tel: +5912 241 90 38 Fax: +5912 241 82 62 Email: ibnorcadceibo . enTel : net. bo

AND HERZEGOVINA (BASMP) Standardization, Metrology and

Patents I

71000 darajevo


BOTS~ANA (BOBS) Botswaxpa Bureau of Standards Plot No. 14391, New Lobatse Road Gaboro$e West Industrial Private bag BO 48 Gaborane


B q (AB”) Associ ao Brasileira de Normas T6cnicas AV. 13 3- e Maio, no 13,28O andar 20003-600 - Rio de Janeiro-RJ

Tel: +552139742300 Fax: +55 21 22 20 17 62 Email: I [email protected]

Planning and Research Unit

Brunei Darussalam

Tel: Fax: Email: [email protected]

+673 2 38 10 33 +673 2 38 IS 41

and Metrology 2 1, 6th Sept/ember Street 1000 Sdfia

Tel: +359 2 989 8488 Fax: +359 2 986 1707 E-mail: [email protected]:.bp;

JANUARY 2002

LIST OF WORLD-MDE STANDARlpS ORGANIZATIONS

BURUNDI(BBN0) Bureau b m d a i s de normalisation et de contr6le de la qualitk 25, rue de la Victoria B.P. 3535 Bujumbura

Tel: +257 22 15 77 Fax: +257 22 18 15

BURKINA FASO (FASONORM) Direction de la Normalisation et de la promotion de la Qualite Office National du Commerce Exterieur B.P. 389 Ouagadougou 1


CAMBODIA ( I S C ) Ministry of Industry, Mines and Energy Department of Industrial Techniques Industrial Standards Bureau 45, Norodom Blvd Phnom Penh


+855 12 92 95 22 +855 23 98 23 03

CAMEROON (CCNQ) Cellule de la Normalisation et de la Qualite Ministere du developpement industriel et commercial. Direction du developpement industriel Yaounde

0

Tel: +237 22 11 20 Fax: +237 22 95 86 Email: [email protected]

CANADA (SCC) Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario KlP 6N7


+1 613 238 32 22 +1 613 569 78 08

CHILE4(INN) Instituto Nacional de Normalizaci6n Matib Cousin0 64-6O piso Casilla 995 - Correo Central Santiago

Tel: Fax: Emaik inn@enTel:chile.net

+56 2 441 03 30 ,+56 2 441 04 27

CHINAi (CSBTS) China S h e Bureau of Quality & Technical Superviqion 4, Zhi Chun Road, Haidian District P.O. Bo% 8010 Beijing LOO088

Tel: , F a : E-mail: [email protected]

+ 86 10 62 00 06 75 +86 10 62 03 37 37

COLOl$lBIA (ICONTEC) Institutoi Colombiano de N o m T6cnicas y Certificdcion Carrera 87 No. 52-95, Edificio ICONTEC P.0 Box 14237 Bogota


+57 1 315 03 77 +57 1 222 14 35

et de l'artisanat

B.P 474' Moroni

Tel: +269 74 42 32 Fax: .+269 73 01 44 Email: [email protected]

CONGC), DEMOCRATIC REPUBLIC OF THE Office qongolais de Controle (OCC) 98 Aven' e du Port

KinshasblGombe B.P. 880, !6l

Tel: + 243 88 051 27 Fax: +243 12 219 74 Email: [email protected]

JANUARY 2002

LIST OF WORXD- WIDE STANDARDS ORGANIZATIONS

COSTA RICA (INTECO) Instituto de Normas T6cnicas de Costa Rica Barrio G o d e z Flores Ciudad Cientifica de la Universidad de Costa Rica San Pedro de Montes de Oca San Jose


COTE-d’IVOIRE (CODINORM) Cote d’Ivoire - Normalisation Angle Bd Botreau RousseYRue du Commerce, 5e Et. Immueble “LE GENERAL” Plateau, 01 BP 1872 Abidjan

Tel: +225 20 2155 12 Fax: +225 20 21 56 11 Email [email protected]

CROATIA (DZNM) State Office for Standardization and Metrology Ulica gradaVukovata 78 10000 Zagreb

Tel: +385 16106320 Fax: +385 1 610 93 20 Email: wed. ravnaTel:[email protected]

CUBA(Nc) Oficina Nacional de Normalizacih Calle E No 261 Entre 11 y 13 Vedado La Habana 10400


CYPRUS (CYS) Cyprus Organization for Standards and Control of

Ministry of Commerce, Industry and Tourism Nicosia 1421

Quality

Tel: + 357 2 86 71 90 Fax: +357 2 75 41 03 Email: [email protected]

C Z E d REPUBLIC (CSNI) Czech Sbndards Institute

Tel: Fax: Email: ! [email protected]

,+420 2 21 80 21 11 .+420 2 21 80 23 11

DK-292 Kollegiv Charlottenlund


+45 39 96 61 01 +45 39 96 61 02

D O W I C A (DBOS) Dominiqa Bureau of Standards 28 Kennj=dy Avenue, First Floor

Tel: +O 1 767 448 16 85 Fax: +O 1 767 449 92 17 E-mail: [email protected]

D O W I C A N REPUBLIC Direccio General de Normas y Sistema

Edificio be Oficinas Gubemamentales Juan Pablo Duarte, Piso 11 Santo Dbmingo

de Cali d L

Tel: .+l 809 686 22 05 Fax: +1 809 688 38 43 Email: xligenor@codeTel: .net.&

E C U ~ O R @YEN) Institutc’Ecuatoriano de Normalizacion Calle BAuerizo Moreno 454 y Almagrd, Edificio INEN

Quit0 PO BOX j 17-01-3999

Tel: Fax: Email: hen 1 @hen. gov.ec

+593 22 56 56 26 +593 2 56 78 15

JANUARY 2002

LIST OF WORLD- WIDE STANDARDS ORGANIZATIONS

EGYPT (EOS) Egyptian Organization for Standardization and Quality Control 16 Tadreeb El-Modarrebeen St El-Ameriya Cairo

Tel: +202603 1349 F a : +2022593480 E-mail: [email protected]

EL SALVADOR (CONACYT) Consejo Nacional de Ciencia y Tecnologia Colonia Medica Ave. Dr E. Alvarez y Pje Dr Guillermo Rodriguez No 5 1- Edificio Espinoza


ESTONIA (ESK) Eesti Standardikeskus 10, Aru Street 10317 Tsllinn

Tel: + 372 605 50 50 Fax: +372 605 50 70 Email: [email protected]

ETHIOPIA (QSAE)

0 Quality and Standards Authority of Ethiopia P.O. Box 23 10 Addis Ababa

Tel: Fax: Email: qsae@Tel :ecom.net . et

+ 251 1 46 05 25 +251 1 46 08 80

FIJI (FTSQCO) Fiji Trade Standards and Quality Control Office Ministry of Commerce, Business Development and Investment Naibati House P 0 Box 2118 Suva


0

FINLAND (SFS) Finnish Standards Association SFS P.O. Boqr 116 FIN-OOi41 Helsinki

Tel: Fax: Email: sfs@sfs. fi

+358 9 149 93 31 +358 9 146 49 25

FRANCE (AFNOR) Associat$on h q a i s e de normalisation Tour Eutope F-92049 Paris La Defeme Cedes

Tel: + 33 1 41 62 80 00 /+33 1 41 62 81 95 Fax: +33 1 49 17 90 00 E-mail: [email protected]

GE-(Dm DIN De tsches Institut fur Normung Burg4nstrasse 6 D-1078 Berlin Postal Avdress D-10772, Berlin

Tel: +49 30 26 01-0 Fax: Email: :[email protected]

+49 30 26 01 12 31

GHANA (GSB) Ghana Sbdards Board PO Box k 245 Accra

Tel: Fax: Email: '[email protected]

+233 21 50 00 65 +233 21 50 00 92

GREEqE (ELOT) Hellenic;Organization for Standardization 3 13, Acdarnon Street GR-11145 Athens

Tel: +30 1 21 20 100 Fax: +30 121 20 131 Email: [email protected]

GREN A(GDBS) Grenada Bureau of Standards Lagoor T oad St. Geo&e's


+ 1 473 440 58 86 + 1 473 440 5554

JANUARY 2002

LIST OF WORLD- MDE STANDARDS ORGANIZATIONS

GUATEMALA (COGUANOR) Comision Guatemalteca de Normas 8a Avenida 10-43, Zona 1 Guatemala


+502 238 33 30 Ext. 1703 +502 238 330 Ext. 1775

GUINEA(INNM) Institut national de normalisation et de metrologie Ministere de la promotion du secteur prive, de l'industrie et du commerce B.P. 1639 CO*

Tel: +224 41 28 16 Fax: +224 41 39 90 Email: inm@soTel:fi .net. gn

GUYANA (GNBS) Guyana National Bureau of Stand& Flat 15, Sophia Exhibition Complex

Greater Georgetown sophia

Tel: +592 2 590 41 Fax: +592 2 574 55 Email: gnbsQsdnp.org.gy

HONDURAS (COHCIT) Consejo Hondureno de Ciencia y Tecnologia Colonia Alameda Avenida Julio Lozano Diaz, cas8 No. 1354 Tegucigalpa Postal Address Aparatado Postal 4458


HONG KONG, CHZNA (ITCHKSAR) Innovation and Technology Commission 36E Immigration Tower 7 Gloucester Road wan chai Hong Kong


HUNGARY (MSZT) Magyar Szabvhyiigyi Testulet mSi ut 25 Pf. 24 H-1450 Budapest 9

Tel: +36 1 456 68 00 Fax: +36 1456 68 23 Email: isolineQmszt.hu

I C E L W (STIU) Icelandid council for Standardization Laugavegur 178 IS-105 Reykjavik

Tel: +354 520 7150 Fax: +354 520 7171 Email: [email protected]

INDIA @Is) Bureau qf Indian Standards Man& ghavan 9 Bahad$r Shah Zafar Marg New D e w 110002

Tel: Fax: E-mail: [email protected]

+91 11 323 79 91 +91 1 1 323 93 99

INDO sIA(BsN) Badan S dardisasi Nasional (Nation Standardization Agency of Indonesia) manggal wanabakti Blok 4, 4" Floor a JI. Jenderal Gatot Subroto, Senayan Jakarta 110270

Tel: Fax: Email: /bsn@bsn. or. id

+62 21 574 70 43 ,+62 21 574 70 45

IRAN, $LAMIC REPUBLIC OF IRAN (ISIRI) Institute bf Standards and Industrial Research of Iran P.O. Bod 14155-6139 IR-Tehnan

Tel: + 98 261 280 60 31-8 Fax: +98 261 280 50 15 Email: [email protected]

JANUARY 2002

LIST OF WORLD-WDE STANDARDS ORGANIZATIONS

IRA0 (COSQC) 0 I '

Cen&'Org&tion for Standardization and Quality Control Council of Ministers P.O. Box 13032 AL- Jaderiya Iq-Baghdad

Tel: +964 1 778 05 95 Fax: +964 1718 73 51 E-mail: cosqc@urukl inlc.net

IRELAND (NSAI) National Standards Authority of Ireland Glasnevin Dublin-9

0 Tel: +353 18073800 Fax: Email: [email protected]

+353 1 807 38 38

ISRAEL (Sn) Standards Institution of Israel 42 Chaim Levanon Street Tel: Aviv 69977

Tel: +972 3 646 51 54 Fax: +972 3 641 96 83 Email: iso/[email protected]

ITALY m n Ente Nazionale Italian0 di Unificazione Via Battistotti Sassi 1 l/b 0 1-20133 Milano


+39 2 70 02 41 +39 2 70 10 61 49

JAMAICA (JBS) Jamaica Bureau of Standards 6 Winchester Road P.O. Box 1 13 Kingston 10

Tel: Fax: +1876 929 47 36 E-mail: [email protected]

+ 1 876 926 31 40-7

JAPAN (JISC) Japanesk Industrial Standards Committee d o S&ds Department Minisq of International Trade and Industry 1-3- 1, €&mmigaseki, Chiyoda-ku Tokyo 100 - 8901

Tel: ' +81 3 35 01 94 71 Fax: +81 3 35 80 86 37 Email: [email protected]

JORDAN (JISM) Jordan Ihstitution for Standards and Metrology P.O. Bob 941287 Amman 11194


+962 6 568 01 39 +962 6 568 10 99

KAZAIbSTAN (KAZMEMST) Commit)ee for Standardization, Metrc.Jgy and Certification Pushkin,str 166/5 473000 h a n a Tel: Fax: E-mail: [email protected]

t7 3 17 2 39 50 84 +7 317 2 39 50 66

KENYA WEBS) Kenya gureau of Standards Off MoIfibasa Road, Behind Belle Vue Cinema P.O. Box 54974 Nairobi'

Tel: + 254 2 50 22 10/19 Fax: + 254 2 50 32 93 Email: kebs@users . africaonlhe . Co. ke

C o d e for Standardization of the Democratic People' t Republic of Korea Zung GS Yok Seungli-Street

Tel: F a :

+85 02 57 15 76 +85 02 381 44 80

JANUARY 2002

~~ ~ -~

LIST OF WORLD- W D E STANDARd)S ORGANIZATIONS

KOREA, REPUBLIC OF (KATS) Korean Agency for Technology and Standards Ministry of Commerce, Industry and Energy 2 Joogangg-dong, Kwanchon-city Kyonggi-do 427-010


+82 2 509 73 99 +82 2 503 79 77

KUWAIT (KOWSMD) Public Authority for Industry Standards and Industrial Services Affairs Standards and metrology Department Post Box 4690 Safat 13047 Kuwait

Tel: +965 43 1 84 5 1 Fax: +965 431 81 59 Email: kowsmd@pai. gov.kw

KYRGYZSTAN (KYRGYZST) State Inspection for Standardization and Metrology 197 Panfilova Str 720040 Bishkek

Tel: +996 31 2 22 78 84 Fax: +996 31 2 66 13 67 Email: gostQkmc.bishkek.gov. kg

LATVIA (LVS) Latvian Standards 157, Kr. Valdemara Street 1013 Riga


+371 7 37 13 08 +371 7 37 13 24

LEBANON (LIBNOR) Lebanese Standards Institution Gedco Centre 3, Bloc B, 10th Floor Shehab AV, between Mkalles & Hayed Sin El-Fil-Dekwaneh Beirut Postal Address P.O. Box 55 120 Sin El Fil Beirut

Tel: Fax: Email: 1ibnorQcnrs.edu.lb

+961 1 48 59 27 +961 1 48 59 29

LIBYAey ARAB JAMAHIRWA (LNCSM) Libyan National Centre of Standardization and Metrolagy Industrial Research Centre Building P.O. BOK 5178 Tripoli '


LESOTHO (LSQAS) Standarb and Quality Assurance Section Ministry of Industry, Trade and Marketing PO Box 747 Maseru 100

Tel: +266 31 28 02 Fax: , +266 3 1 03 26 E-mail: [email protected]

LITW/4NIA (LST) L i t h q a n Standardization Board T. Kosc uskos g. 30 2600 V i u s

Tel: +370 2 70 93 60 Fax: +370 2 22 62 52 Email: , [email protected]

L U X E ~ U R G (SEE) Service , e 1'Energie de 1'Etat (SEE) Organisline luxemburgeoise de Normalisation 34, avenbe de la Porte-Neuve BPlO '

L-2010 Luxembourg

Tel: Fax: Email: isee.normalisationQeg.etat.lu

+352 46 97 46 1 '+352 46 97 46 39

Transfer Center

Edificio Associaqao Comercial de Macau 6Oandar

MO- Mgcau

Tel: +853 781 313 Fax: +453 788 233 E-mail: : [email protected]

JANUARY 2002

LIST OF WORLD- WIDE S T M D m S ORGANIZATIONS

MADAGASCAR (BNM) 0

Bureau de Normes de Madagascar B.P. 1316 Antanamrivo 101

Tel: +26120 22 238 60 Fax: +26120 22 264 26

MALAWI (MBS) Malawi Bureau of Standards PO Box 946 Blantyre


MALAYSIA @SM) Department of Standards Malaysia Ministry of Science, Technology & the Environment of Malaysia Level 1 & 2, Block C4, Parcel C Federal Government Administrative Centre MY-Putrajaya 62502

Tel: + 60 3 55 19 80 33 Fax: +60388885060 Email: [email protected]

MALTA (MSA) Malta Standardisation Authority 206 Floor, Evans Building Merchants Street 0 VallettaVLT03


MALI(MLIDNI) Direction Nationale des Industries Boite postale 278 Centre commercial Rua Famolo Coulibaly, pork 152 Bamako


MAURITIUS (MSB) Mauritids Standards Bureau Villa Lane M o b


MExIcp @GN) Direcci6p General de Normas Calle Puente de Tecamachalco No 6 Lomas de Tecamachalco Secci6n Fuentes Naucalp de Jdrez 53950 t exico

Tel: +52 55 5729 94 80 Fax: +52 55 57 29 94 84 E-mail: [email protected]

MOLDQVA, Rep. of (MOLDST) Department of Standards, Metrology and Technical Supervision. Str. Coca 28 MD-or. Chisinau 2064


+373 2 74 85 88 +373 2 75 05 81

MONWLIA (MNCSM) Mongolib National Centre for Standardization and Metrology PO Box 48 Ulaanbdatar-51

Tel: Fax: Email: mncsm@magicnet,mn

+976 11 45 83 49 +976 11 45 80 32

MORO CO(SNIMA) Service f e normalisation indusmelle marocaine Ministet.edu commerce, de l’industrie et l’artisnat Angle A h u e A1 Film et rue Dadi Secteur 2 1 Hay Riad 10100 bat Tel: + 212 37 71 62 14 Fax: +2123771 1798 Email: [email protected]

JANUARY 2002

LIST OF WORLD- W D E S T M D D S ORGANIZATIONS

MOZAMBIQUE (INNOQ)

National Institution of Standardization and Quality C.P. 2983 Maputo


+258 1 30 38 22 +258 1 30 36 58

NAMIBIA (NSIQO) Namibia Standards Information and Quality Office Ministry of Trade and Industry Goethe Street, Private Bag 13340 Wmdhoek

Tel: Fax: E-mail: [email protected]

+264 61 283 71 11 +264 61 22 02 27

NEPAL (NBSM) Nepal Bureau of Standards and Metrology P.O. Box 985 SUUdhara Kathmandu


+977 1 35 08 18 +977 1 35 06 89

NETHERLANDS WEN) Nederlands Nonnalisatie-instituut Vlinderweg 6 NE2623 AX Delft

Postal Address PO Box 5059 2600 GB Delft

Tel: Fax: Email: inf0anen.d

+31 15 2 69 03 90 +31 15 2 69 01 90

NEW ZEALAND (SNZ) Standards New Zealand Radio New Zealand House 155 The Terrace Wellington 6001

Postal Address Private Bag 2439 WeUington 6020

Tel: Fax: Email: nelson.procter@>tmdards.com

+64 4 498 59 90 +64 4 498 59 94

NICARAGUA (DGCYT) Direccign General de Ciencia y Tecnologia Ministefio de Foment0 y Desarollo Apartaq postal No 8 Managua

Tel: Fax: +505 2 67 20 19 E-mail &[email protected]

+ 505 2 67 01 61 Ext. 1032

NIGER/M (SON) Standarb Organization of Nigeria Federal 'Secretariat Phase I, 9th Floor Ikoyi Lagos

Tel: Fax: Emak [email protected]

+234 1 26 96 178 +234 1 26 96 176

NORWAY (NSF) Norges Standardiserings forbund Drammqmveien 145 A Postbob 353 Skoyen N-0213 Os10


OMAN@GSM) Direct0 te General for Specifications and Meas f ments Ministry of Commerce and Industry P.O. Bok 550 Postal Cose No. 113 Muscat

Tel: +968 771 32 38 Fax: +968 771 59 92 Email: dgsm 123aomanTel: .net .om

PAKISTAN (PSI) Pakistad Standards Institution Block #p7, Pakistan Secretariat PK-Kadachi-74400


+92 2 1 920 62 6 1 . +92 21 920 62 63

JANUARY 2002

LIST OF WORLD- WIDE STAN'DARJbS ORGAN'IZATIONS

PALESTINE(PSI) Palestine Standards Institution P.O. Box 2258 Alburg Elakhdar Bldg. Nuzha Street PS- Ramallah

Tel: +972 2 298 41 44 Fax: +972 2 296 44 33 Emd. [email protected]

PANAMA (COPANIT) Comisi6n Panamena de Normas Industriales y T&cnicas Edificio Plaza Edison, Tercer Piso Avenida Ricardo J. Alfaro y Calle El Paical Apartado Postal 9658 PanamO, 4

Tel: +5073600600 Fax: +507 360 07 21 Email: dgnti@mici. gob. pa

PAPUA NEW GUINEA (NISI") National Institution of Standards and Industrial Technology P.O. Box 3042 National Capital District Boroko


PARAGUAY (IN") Instituto Nacional de Tecnologia y Normalizaci6n u." AV. Artigas 3973 Casilla de Correo 967 PY-Asunci6n


PERU (INDECOPI) Instituto Nacional de Defensa de la Competencia y de la Proteccion de la Propiedad InTe1:ectual Calle la Prosa 138 San Borja Lima 41


PHILIBPINES (BPS) Bureau bf Product Standards Departnbent of Trade and Industry 361 Sen. Gil J. Puyat Avenue Makati City Metro Manila 1200

Tel: +63 2 890 49 65 Fax: +63 2 890 51 31 Email: [email protected] .ph

POLAND (PKN) Polish Committee for Standardization ul. Swietoknyska 14B P.O. Bor 41 1

Warszawa PL-OO-950

Tel: +48 22 556 75 91 Fax: +4t3 22 556 77 86 E-mail: [email protected]

PORTUGAL (IPQ) Institutol Portugu6s de Qualidade Rua Anhonio Giao, 2 P-2829-513 Caparica


QATAR D e p e t of Standards, Measurements and Consumer Protection Ministry: of Finance, Economy and Commerce P.O. Box 1968 Doha

Tel: +974 40 85 55 Fax: 4-974 47 88 49 Email: [email protected]

ROMATfJIA (ASRO) Asociatic de Standardizare din Romania Str. Mefleleev 2 1-25 70168 V curesti 1 R0-701,8 i Bucuresa 1


+ 40 1 21 1 32 96 +40 1 210 08 33

JANUARY 2002

LIST OF WORLD- W D E STMDARP)S ORGANIZATIONS

RUSSIAN FEDERATION (COST R) State Committee of the Russian Federation for Standardization and Metrology Leninslq Prospekt 9 Mosha 117049

Tel: Fax: Email [email protected]

+7 095 236 40 44 +7 095 237 60 32

RWANDA (ORN) Office Rwandais de Normalisation (ORN) B.P. 6185 RW- Kigali

Tel: +250 829 45 Fax: +250 833 05 E-mail: poin~oc@fwandaTel: 1 .rwandal .com

SAUDI ARABIA (SASO) Saudi Arabian Standards Organization Imam Suad Ibn Abdul-Aziz Ibn Mohammed St (West End) P.O. Box 3437 Riyadh 11471

Tel: +966 1452 0000 Fax: +966 1 452 0086 Email: [email protected]

SAINT LUCIA (SLBS) Saint lucia Bureau of Standards Heraldine Rock Building , 4m Floor, John Compton Highway Castries

Tel: + I 758 453 00 49 Fax: +1758 452 35 61 Email: [email protected]

SEYCHELLES (SBS) Seychelles Bureau of Standards Pointe Lame Mahe Postal Address PO Box 953 Victoria Mahe


SINGAPORE (PSB) Singapore Productivity and Standards Board 1 Sciedce Park Drive Singapbre 118221


SL0VAkKI.A (SUTN) Slovak !Institute for Standardization PO Bo? 246 Karloveska 63 840 00 Bratislava 4

Tel: Fax: Email: ms [email protected]

+4217 60 29 44 74 +4217 65 41 18 88

SLOqNIA (SMIS) S t a n w and Metrology Institute of the Republic of Slovenih Smartiqska 140 SI-1000 Ljubljana

Tel:: +386 1478 30 13 Fax: : +386 1 478 30 94 E-mail [email protected]

SOUTH AFRICA (SABS) South kfiican Bureau of Standards 1 Dr Lategan Road, Groenkloof Private Bag X 1 9 1 Pretorih 0001


SPAIN [AENOR) Asociacirjn Espanola de Normalizaci6n y Certi fichcion Genova(6, E-28004 Madrid


+34 91 432 90 00 +34 91 310 49 76

JANUARY 2002

LlST OF WORLD- W D E STMDARDS ORGANIZATIONS . SRILANKA(SLSI) Sri Lanka Standards Institution 17 Victoria Place Off Elvitigala Mawatha P.O. Box 17 Colombo 08


SWAZILAND (SQAS) Standardization and Quality Assurance Section Ministry of Enterprise and Employment P.O. Box 45 1 SZ- Mbabane

Tel: +268 404 32 01/2/3/4/5/6 Fax: +268 404 47 11 E-mail: [email protected]

0

SWEDEN (SIS) SIS - Standardiseringen I Sverige Swedish Standards Institute Sa& Paulsgatan 6 SE-118 80 Stockholm

Tel: +46 8 55 55 20 00 Fax: +46 8 55 55 20 01 E-mail: [email protected]

SWITZERLAND (SNV) Swiss Association for Standardization

CE-8400 Zurich 0 Biirglistrasse 29


SYRIAN ARAB REPUBLIC (SASMO) Syrian Arau Organization for Standardization and Metrology P.O. Box 11836 Damascus


+963 11 512 82 13 +963 11 512 82 14

S U D d (SSMO) Sudanege Standards & metrology Organization PO Boa 13573 SD-Khdrtoum


+249 11 77 74 80 +249 11 77 48 52

TANZ,$NIA, UNITED REP. OF (TBS) Tanzania Bureau of Standards Ubungo Area Morogo o Roadsam Nujoma Road Dares d alaam

Postal Address P.O. Bok 9524 Dar es Salaam


+255 22 245 02 98 +255 22 245 09 59

THAILAND (TISI) Thai Inclustrial Standards Institute Ministq of Industry Rama vt Street Bangkok 10400

Tel: +66 2 202 34 00-2 Fax: + 66 2 247 87 41 Email: [email protected]

THE F RMER YUGOSLAV REPUBLIC OF MACEqONIA (ZSM) Zavod za standardizacija I metrologija Ministry of Economy Samoilova 10 1000 Skopje


+389 91 23 91 15 +389 91 11 02 63

TRINIDlAD AND TOBAGO (TTBS) Trinidad, and Tobago Bureau of Standards 1-2 Centby Drive Trincity Industrial Estate Tunapupa Postal Address P.O. Box 467 Port of Spain

Tel: Fax: Email: ttbsacarib-link.net

+1 868 662 88 27 +1 868 663 43 35

JANUARY 2002

LIST OF WORLD- WDE STANDARLN ORGANIZATIONS

TUNISIA ("ORPI) Institut national de la normalisation et de la proprietd indwtrielle B.P. 23 1012 Tunis-Belvbdh-e

Tel: Fax: Email: inorpi@Email: .ati.tn

+ 216 71 78 59 22 +216 71 78 15 63

TURKEY (TSE) Tiirk Standardlari Enstitiisii Necatibey Cad. 112 Bakanliklar 06100 Ankara


+90 312 417 83 80 +90 3 12 425 43 99

TURKMENISTAN (MSIT) Major State Inspection "Turkmenistandartlary" Seydi, 14 744000 Ashgabat


UCANDA(UNB!3) Uganda National Bureau of Standards P.O. Box 6329 Kampala


-E @ S W State Committee of Ukraine for Standardization, Metrology and Certification (Derjstandart of Ukraine) 174 Gorkiy Street 03680 GSP, KYIV-680


+380 44 226 29 71 +380 44 226 29 70

UNITE ARAB EMIRATES (SSUAE) Direct0 T te of Standardization and Metrology Ministry/ of Finance and Industry El FalahIStreet P.O. Bo% 433 Abu DhCbi


UNITE KINCDOM(BSI)

389 Chidwick High Road GB- Lotdon W4 4AL

Tel: Fax: Email: infoabsi-global . com

British L dards Institution

+44 181 996 90 00 +44 181 996 74 00

URUG~AY (UNIT) Instituto/Uruguayo de Normas Tbcnicas Pza Independencia 8 12 Pis02 ,

Montefldeo Tel: Fax: Email: [email protected]

+598 2 901 20 48 +598 2 902 16 81

USA (?SI) Americ National Standards Institute 1819 L$reet,NW Washington, DC 20036


USA (+ME) Americ Society of Mechanical Engineers United Tgineering Center 345 Eastl47th Street New Yotk, N.Y. 10017-2392

Tel: '+1 212 605 3333

Metrology

Tel: Fax: E-mail: e uzgost@,naytov.com

+998 71 144 48 31 +998 71 144 80 29

JANUARY 2002

LIST OF WORLD-MDE STANDAR~S ORGANIZATIONS

0 VENEZUELA WONDONORMA) ' Fondo para la Nonnalizacion y Ce&ficacion de la Calidad Avda. An&& Bello-Edf. Torre Fondo C o m b Piso 11 y 12, Apartado Postal 51116 Caracas 1050 - A


+58 2 575 41 11 +58 2 574 13 12

VET NAM ("CVN) Directorate for Standards and Quality 70, Tran Hung Dao Street Hanoi

Tel: Fax: +84 4 942 24 18 5 '

+ 84 4 822 16 14

Email: [email protected]

YEMEN (YSMO) Yemen Standardization, Metrology and Quality Control Organization P.O. Box 19213 Sana'a

Tel: Fax:

+967 1 20 22 49 +967 1 20 22 49

WGO LAVIA(SZS) Savezr$avod za standardizaciju Kneza iloIa20 Post P&r. 609 W-11000 Beograd

Tel +381 11 361 31 50 Fax: +381 11 361 73 41 Email: I [email protected]

ZIMBFW (SM) Standarp Association of Zimbabwe P.O. BT 2259 Barare!

Tel: Fax: Email. sazinfo@mweb .CO .zw

+263 4 88 20 1719 +263 4 88 20 20

JANUARY 2002