BuiltTough

PUMP SPECIFICATION SHEET

HEAVY DUTYAutomatic self-priming single stage end suction pump

SOLIDS HANDLINGLarge solids capacity while maintaining hydraulic efficiencies

CORROSION RESISTANTStainless steel 316 (CF8M) internals as standard.

SEWAGE & WASTE

RentalConstruction & Civil

Sewage & Waste Water

MarineAgricultureQuarries

Sykes SW250-380-SR Perkins 1106D-E70TA 186kW

MATERIALS OF CONSTRUCTION AUSTRALIA AMERICAS

STANDARDS MATERIAL GRADE AS GRADE ASTM

Tee Piece SG Iron 400/12 1831 65-45-12 A536

Front Adaptor Plate SG Iron 400/12 1831 65-45-12 A536

Pump Casing (Volute) SG Iron 400/12 1831 65-45-12 A536

Front Wear Plate Stainless 316/H6B 2074 CF8M A351

Impeller Stainless 316/H6B 2074 CF8M A351

Rear Wear Plate Stainless 316/H6B 2074 CF8M A351

Rear Adaptor Plate SG Iron 400/12 1831 65-45-12 A536

Pump Shaft Stainless 431 2074 98b-431 A276

Bearing Bracket SG Iron 400/12 1831 65-45-12 A536

Bearing Covers SG Iron 400/12 1831 65-45-12 A536

Mechanical Seal Multi spring balanced mechanical seal assembly with silicon carbide/silicon carbide mechanical seal faces in self-contained oil reservoir.

STANDARD RANGE (SR) INCLUSIONS• Galvanised steel, dual point lifting frame.

• Manual diesel fuel fill (lockable).

• Pump and engine control panel with emergency stop as standard.

• Heavy duty battery, complete with battery box enclosure.

• Vacuum (suction inlet) and Pressure (discharge outlet) gauges.

• Pump operating range sign for optimum pump life and reliability.

• Galvanised steel sled, complete with tyne pockets and tie down points for transportation.

OPTIONAL EXTRAS Please contact us to discuss these options:

• Additional operational, mobility and safety extras such as: suction and discharge couplings, strainers, battery isolators, heavy duty sleds and trailers. These can all be selected and fitted to our Standard Range (SR) pump units.

• Our SR build configuration uses Perkins diesel engines, however, alternative engine brands are available upon request.

• Other pump materials of construction are also available upon request: full 316 stainless steel, CD4MCU, chromium steel, SAF 2205 and SAF 2507.

* Based on standard engine brake specific fuel consumption.

Final weight and dimensions will depend on completed specifications and options, subject to manufacturing tolerances. All the information in this document is substantially correct at the time of creation and may be altered at the manufacturer’s sole discretion. Any quotes and related material provided supersedes the contents hereof.

This pump and engine combination will produce up to 1,700 RPM of non-overload pump performance.

0 1000 2000 3000 4000 5000 6000

-65

-15

35

85

135

185

-20

-10

0

10

20

30

40

50

60

0 50 100 150 200 250 300 350 400

FLOW (US GPM)

HEAD

(FEE

T)

HEAD

(MET

RES)

FLOW (LITRES PER SECOND)

SW250 Performance Curve

RECOMMENDEDOPERATING RANGE

PUMPEND:

SW250

IMPELLER DIA:

380mm / 14.96"

SOLID HANDLING SIZE:

100mm / 3.93"

SUCTION SIZE:

250mm / 10"

DISCHARGE SIZE:

200mm / 8"

Revision: 0 29/10/2018

POW

ER k

W (H

P)

Best Efficiency Point(s)

Power curves include power consumption of pump priming system

0 / 0

150 / 201

1500 rpm

1600 rpm

1700 rpm

1800 rpm

1400 rpm

¹Performance to AS2417/ISO9906 Grade 2 for clear, cold (15°C) water at sea level. Other liquids may require performance adjustments.²Performance curves do not include discharge check or non return valve losses.

100 / 134

50 / 67

1800 rpm

1300 rpm

1300 rpm

1400 rpm1500 rpm

1600 rpm1700 rpm

0175 / 235

125 / 168

75 / 101

25 / 34

TECHNICAL DATA

DESIGN DETAILS

Auto self priming, centrifugal single stage, end suction, 3 vane semi open impeller

Suction Flange 250mm / 10”

Delivery Flange 250mm / 10”

Solids Handling 100mm / 4”

Maximum Head 55m / 180ft

Maximum Flow 355L/sec / 5,627 USgal/min

Engine Type Perkins 1106D-E70TA 186kW

Engine Adaptor SAE #3

Shaft Diameter 50mm / 1.97”

Fuel Rate @ BEP 1,600rpm 31.1L/hr / 0.14 USgal/min *

Fuel Tank Capacity 900L / 234 USgal

REV11062019

TECHNICAL DATA

* Based on standard engine brake specific fuel consumption.

Final weight and dimensions will depend on completed specifications and options, subject to manufacturing tolerances. All the information in this document is substantially correct at the time of creation and may be altered at the manufacturer’s sole discretion. Any quotes and related material provided supersedes the contents hereof.

REV11062019

3130123.2

O/ALL SLED

100039.4

FORK TYNE CTRS (NOM.)

15°

92

036

.2

(NO

M.)

2359.3

(NOM.)

ELEVATION

250mm TABLE 'E' / 10" ANSI 150GALVANISED SUCTION SPOOL

TWO POINT LIFT(W.L.L. = 5 TONNE [11020 LBS])

TIE DOWN HOLESFOR TRANSPORTATION

2 X 12V BATTERY

OPERATING RANGE SIGN

SW250 PUMPENDC/W SUCTION VACUUM GAUGE

DISCHARGE PRESSURE GAUGE

140555.3

= O/ALL SLED =

144056.7

= (NOM.) =

165

565

.2

(NO

M.)

150.6

(NOM.)

222

587

.6

O/A

LL

END ELEVATION

200mm TABLE 'E'DISCHARGE FLANGE

78530.9

(NOM.)

PLAN

BALL TYPE NON-RETURN VALVE

PERKINS 1106D-E70TADIESEL ENGINE

2" LOCKABLE FUEL FILL

S17 CONTROL PANELC/W E-STOP

ISOMETRIC VIEW

ISOMETRIC VIEW

NOTES:

SPECIFIED:- (NOTSHOWN)900L [238 US GAL] FUEL TANKELECTRONIC THROTTLE SPEED CONTROL

APPROX WEIGHT:-DRY = 2735 KG [6030 LBS]WET = 3485 KG [7680 LBS]

PUMPEND MATERIALSVOLUTE = SG IRON 400/12IMPELLER = STAINLESS STEEL GR316SHAFT = STAINLESS STEEL GR431FRONT WEAR PLATE = STAINLESS STEEL GR316REAR WEAR PLATE = STAINLESS STEEL GR316FRONT ADAPTOR PLATE = SG IRON 400/12REAR ADAPTOR PLATE = SG IRON 400/12PRIMING TEE = SG IRON 400/12NRV MATERIAL = SG IRON 400/12

GENERAL NOTES:-ALL DIMENSIONS IN MILLIMETRES [INCHES] U.N.O.

SW250-380 X PERKINS 1106D-E70TA - STANDARD PUMPSET OF SKIDSREVISION HISTORY

REV. DESCRIPTION DRAWN DATE CHECK DATE APPR. DATEA ISSUED FOR INFORMATION AD 28/02/19 BG 28/02/19 RCO 28/02/19

SIGN DATEDRAWN:CHECK:APPR:

AD

BG

RCO

28/02/19

28/02/19

28/02/19

AR-SW250-380-TOP DISCHARGE ON SKIDS

SR250380TDSDRG NO:

ITEM NO:SHEET 1 OF 1

REV:AF:\Cardiff Engineering\SolidWorks\SolidWorks Library\SP-DATA\Renders\SR-SW250-380\SR-SW250-380-TOP DISCHARGE SKIDS

TITLE

SIZE: A2

WET: 3,485 kg (7,690 lb)DRY: 2,235 kg (6,030 lb)

3130123.2

O/ALL SLED

100039.4

FORK TYNE CTRS (NOM.)

92

036

.2

(NO

M.)

15°

2359.3

(NOM.)

ELEVATION

250mm TABLE 'E' / 10" ANSI 150GALVANISED SUCTION SPOOL

TWO POINT LIFT(W.L.L. = 5 TONNE [11020 LBS])

TIE DOWN HOLESFOR TRANSPORTATION

2 X 12V BATTERY

OPERATING RANGE SIGN

SW250 PUMPENDC/W SUCTION VACUUM GAUGE

DISCHARGE PRESSURE GAUGE

140555.3

= O/ALL SLED =

144056.7

= (NOM.) =

64

025

.2

(NO

M.)

2208.7

(NOM.)

222

587

.6

O/A

LL

END ELEVATION

200mm TABLE 'E'DISCHARGE FLANGE

78530.9

(NOM.)

PLAN

FLAP TYPE NON-RETURN VALVE

PERKINS 1106D-E70TADIESEL ENGINE

2" LOCKABLE FUEL FILL

S17 CONTROL PANELC/W E-STOP

ISOMETRIC VIEW

ISOMETRIC VIEW

NOTES:

SPECIFIED:- (NOTSHOWN)900L [238 US GAL] FUEL TANKELECTRONIC THROTTLE SPEED CONTROL

APPROX WEIGHT:-DRY = 2735 KG [6030 LBS]WET = 3485 KG [7680 LBS]

PUMPEND MATERIALSVOLUTE = SG IRON 400/12IMPELLER = STAINLESS STEEL GR316SHAFT = STAINLESS STEEL GR431FRONT WEAR PLATE = STAINLESS STEEL GR316REAR WEAR PLATE = STAINLESS STEEL GR316FRONT ADAPTOR PLATE = SG IRON 400/12REAR ADAPTOR PLATE = SG IRON 400/12PRIMING TEE = SG IRON 400/12NRV MATERIAL = SG IRON 400/12

GENERAL NOTES:-ALL DIMENSIONS IN MILLIMETRES [INCHES] U.N.O.

SW250-380 X PERKINS 1106D-E70TA - STANDARD PUMPSET OF SKIDSREVISION HISTORY

REV. DESCRIPTION DRAWN DATE CHECK DATE APPR. DATEA ISSUED FOR INFORMATION AD 28/02/19 BG 28/02/19 RCO 28/02/19

SIGN DATEDRAWN:CHECK:APPR:

AD

BG

RCO

28/02/19

28/02/19

28/02/19

SR-SW250-380-UNDERSLUNG ON SKIDS

SR250380USSDRG NO:

ITEM NO:SHEET 1 OF 1

REV:AF:\Cardiff Engineering\SolidWorks\SolidWorks Library\SP-DATA\Renders\SR-SW250-380\AR-SW250-380-TOP DISCHARGE

TITLE

SIZE: A2

250mm TABLE ‘E’ / 10” ANSI150 DISCHARGE FLANGE

250mm TABLE ‘E’ / 10” ANSI150 DISCHARGE FLANGE