bulletin no. mce-c 5017p
TRANSCRIPT
1
MOTOYAMA Style JNO/JNB safety relief valves covermost process plant overprotection applications
and complement our other extensive linesto satisfy your diversified requirements
GUARANTEE "All Products of MOTOYAMA ENGINEERING WORKS LTD. are guaranteed for a period of one year from date of shipment to be free from defective workmanship and material. Within this period, any of our products claimed defective may be returned to our factory after written notification to and authorization by us, and if found to be defective after examination by us, the products will be repaired or replaced free of charge. F.O.B. our factory. Such defects shall be exclusive of the effects of corrosion, erosion,normal wear or improper handling or storage.
We make no representation, warranty or guaranty, express or implied, with regard to our products except as specifically stated. When in doubt as to the proper application of any particular product, you are invited to contact our International Sales Sect. We cannot otherwise be responsible for the selection of unsuitable equipment. Suitability of the material and product for the use contemplated by the buyer shall be the sole responsibility of the buyer.
Except as specifically set forth above and for warranty of title, MOTOYAMA MAKES NO WARRANTY, EXPRESS OR IMPLIED, OF ANY KIND INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
In no event will MOTOYAMA be liable for incidental or consequential damage."
CONTENTS
●Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1●Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2●Designation/Code for Style JNO/JNB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3●JNB & JNO-H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4●JLT-JNO/JLT-JNB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6●Caps and lifting levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12●Standard valve materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14●Special valve materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15●Sizes, pressure‚ temperature limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16●Saturated steam capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44●Air capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45●Water capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46●Seat tightness—metal-to-metal seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47●Valve installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48●Flanges and flange facing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49●Equivalents and conversion factors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50●Ordering information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51●On site acceptance inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52●Other products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Notice: Specification in this bulletin is subject to change without notice due to time-to-time improvement.
Page
1
Specifications
⃝JNO/JNB full nozzle top guided and direct spring loaded safety relief valves are manufactured in accordance with requirements of ASME Code Section VIII.
※1 For other than the ASME certification product, MOTOYAMA execute API std527 by a request.
⃝Allowable. leak rate
⃝Inlet flange ratings
⃝Outlet flange rating
⃝Temperature ranges
⃝Sizes
⃝Orifices
⃝Dimensions
API Standard 527 (except steam service) ※1
150 lb to 2500 lb ASME
150 lb and 300 lb ASME
–268˚C (–450F) to +538˚C (+1000F)
1"D2" to 8"T10"
D (0.709cm2) to T (167.740cm2)
Conforming to API Standard 526
Service
Style
JNO (Conventional type)
JNB (Balanced Bellows type)
JLT-JNO/JNB(JNO/JNB with liquid trim)
JNO-H (Open bonnet type)
Gasor
Vapor
–
– – –––
– – –
10
10
10
25
25
10
7
7
7
25
25
10
Liquid Steam
Overpressure (%)
Gas orVapor or
SteamLiquid
Blowdown (%)
Gas orVapor or
SteamLiquid
O-Ringsoftseat
Valve Styles and Services
: Recommended : Acceptable
Features
1 Outstanding PerformanceSmooth flow pattern enables to obtain large capacity of discharge in a stable manner. Capacities are certified by the National Board of Boiler and Pressure Vessel Inspectors.
2 Single Ring AdjustmentBlowdown control is provided with the adjustable nozzle ring only.
3 Positive Self AlignmentDouble universal ball joint assures tight-seal and proper alignment.
5 Excellent Seat Tightness
6 High Coefficient of Discharge for Liquid Service
Flat and thermally balanced disc insert makes no thermal distortion.
Patented JLT liquid trim acquires high capacity.
7 Easy and Economical Maintenance Minimized parts number saves customer's investment to own and to maintain valves.
4 Non Galling TroublesSpindle guide employes the advantages of large guiding ratio and of difference in material hardness.
2
Designation/Code for Style JNO/JNB
JNBlank ; Standard Trim
Blank ; Standard structure
JLT– ; Liquid trim
H
O
; Blanced bellows
O
B
; Conventional
1 ; Inlet Flange ASME/JPI CI 150
(Style JNO and ASME SEC. VIII only)
2 ; Inlet Flange ASME/JPI CI 300
3 ; Inlet Flange ASME/JPI CI 300
4 ; Inlet Flange ASME/JPI CI 600
5 ; Inlet Flange ASME/JPI CI 900
6 ; Inlet Flange ASME/JPI CI 1500
7 ; Inlet Flange ASME/JPI CI 2500
; Open Bonnet for Steam Service
; O-Ring for Soft Seat
P
J
; Piston-Balanced Type
; Jacketed Body
[Pressure Rating]A ; Screwed cap(Standard)
B ; Screwed cap and test gag
C ; Open cap and Regular lifting lever
D ; Bolted cap and Packed lifting lever
E ; Bolted cap and Packed liftinglever and test gag
G ; Bolted cap
H ; Bolted cap and test gag
[Caps Types]
2 ; –268 deg. C to 101 deg. C ASTM CF8M, JIS SCS14A
4 ; –59 deg. C to 30 deg. C ASTM CF8, JIS SCS13A
5 ; –29 deg. C to +232 deg. C ASTM WCB, JIS SCPH2
3 ; –100 deg. C to 60 deg. C ASTM CF8, JIS SCS13A
6 ; +233 deg. C to +427 deg. C ASTM WCB, JIS SCPH2
7 ; +428 deg. C to +538 deg. C ASTM WC6, JIS SCPH21
[Temperature Ranges]〈Standard body materials〉
Blank ; Standard Material
S0, S04, S05, S, S1, S4, S5,M, M1, M4, M5, etc.
[Optional Materials Code]
Style Code
3
4 5
JNO & JNO-H
Style JNO closed bonnet
Style JNO-H open bonnet
JNO Conventional typeJNO is a basic type of the J series and is a high-performance safety valve acquiring certification of ASME SEC. VIII.The closure member secures a high alignment by universal joint and spindle guide style and maintains high sealing characteristics.Because JNO is simple structurally, part replacement is easy, and maintenance performance is high. Therefore, this series can simplify the type change, too.
JNO-H Open Bonnet typeStyle JNO-H with open bonnet and Type C regular lifting lever is available as an option for ASME Section VIII steam applications. Only the bonnet need be changed to convert a Style JNO Type C to Style JNO-H.With the open bonnet feature, carbon steel spring material can be used to +343˚C (+650F).
5
JNB & JNB-P
JNB Balanced Bellows type
Bellows
Vent hole with nipple & elbow
SizeD·E : Rc⅜F~T : Rc½
Style JNB-P Piston-Balanced
JNB Balanced Bellows typeA high capacity Safety-Relief Valve, but developed especially for services where the valve must operate under conditions of built-up or superimposed back pressure due to being connected to a closed blowdown system, and for those services where severe corrosion or fouling of working parts can be anticipated. The bellows subassembly is the only construction difference between style JNB and JNO valves and conversions from one style to the other are simple.
JNB-P Piston-Balanced typeJNB-P maintains certain performance without set pressure changing by action of the supporting piston even if the bellows are demaged by any possibility.This piston is construction of the labyrinth seal and minimizes leakage of the fluid to the ambient in the bellows failure.Therefore, this type establishes double security and keeps the characteristics of the safety valve until damaged bellows are exchanged.
6 7
JLT-JNO/JLT-JNBJLT Liquid Trim
Full lift and rated capacity at 10% overpressure with stable operation from a pressure relief valve specifically designed for liquid service.
High Coefficient of Discharge
The JLT Liquid trim construction has a high coefficient of discharge. Generally a smaller JLT orifice size may be selected than that of a conventional pressure relief valve sized for the same application. Smaller orifice sizes mean reduced valve and related piping costs.
High Capacity at 10% Overpressure
Published valve capacities are based on capacity certification tests performed at 10% overpressure. This eliminates the need to use the traditional overpressure derating factor based on 25% overpressure is based on the ASME Boiler and Pressure Vessel Code that permits pressure in a vessel to rise 10% above the maximum allowable working pressure (MAWP) of the vessel during an overpressure excursion.
Typical Valve Opening and closing Curve
7
JNO-O/JNB-OO-Ring Soft Seat
O-Ring Soft Seat Materials and Pressure/Temperature Limits
Kalrez® (80)Q(80)FKM(70)
Kalrez® (90)
Kalrez® (90)FKM(90)
NBR(70)EPDM(90)Kalrez® (80)Q(70)FKM(75)
NBR(90)EPDM(90)Kalrez® (90)FKM(90)
Q(70)
PTFE
Q(80)
PTFE
Figures in ( ) are Durometer Hardness Specifications
NB
R(5
0)Q
(50)
Q(5
0)K
alre
z®(8
0)Q
(50)
FK
M(7
0)K
alre
z®(8
0)This O-Ring of JNO/JNB is placed in a groove of the disc insert and slightly touches nozzle seat. The spring load is supported with metal seat.Moreover, it was in the construction which had superior closure characteristics to use inlet pressure because an O-Ring was located inside of nozzle seat.EPDM = Ethylene Propylene RubberNote: Other soft seat materials are available on request.
For O-Ring seats below –150F (–101˚C) consult MOTOYAMA.For steam service, metal-to-metal seats are recommended; consult MOTOYAMA if soft seats are required.
MAXIMUM SETPRESSURE LIMITS
ORIFICE
DEFGHJKLMNPQRT
14801480148014801480148014801000110010001000
600300300
10.2010.20 10.20 10.20 10.20 10.20 10.20
6.897.586.896.894.132.062.06
MAXIMUM SETPRESSURE
PSIG MPaG
8 9
This series is the construction that enclosed a body portion in jacket and is the type which can warm a valve in hot oil, steam or hot water.This type is most suitable for a paraffin series fluid having high viscosity coefficient at atmospheric temperature.There are the semi-jacket type which only a valve casing enclosed and the full-jacket type enclosed to a valve casing, an inlet and an outlet.
Semi Jacket Type
Full Jacket Type
Size RatingInlet
RatingASME
Dimensions
E P F Q
Approx. Height HACap TypeA,B C,D,E
3/4 D 11( ) 150 160 130 18.5 41 470 515
2( ),3( ) 300 160 130 18.5 41 470 5154( ) 600 160 130 18.5 41 470 515
1 DE 2l( ) 150 160 125 18.5 41 470 515
2( ),3( ) 300 160 125 18.5 41 470 5154( ) 600 160 125 18.5 41 470 515
11/2 F 2
1( ) 150 175 152.5 18.5 41 550 5952( ) 300 175 152.5 18.5 41 550 5953( ) 300 175 152.5 18.5 41 550 5954( ) 600 175 152.5 18.5 41 550 595
11/2 G 21/2
1( ) 150 150 135 18.5 41 525 5702( ) 300 150 135 18.5 41 525 5703( ) 300 180 152.5 18.5 41 555 6004( ) 600 180 152.5 18.5 41 555 600
11/2 H 31( ) 150 185 150 18.5 47.5 580 6252( ) 300 185 150 18.5 47.5 580 625
2 H 33( ) 300 180 150 18 44 580 625
47 600 180 150 18 44 580 6254( ) 600 200 170 18 50 630 680
2 J 31( ) 150 165 160 18 41 540 5852( ) 300 165 160 18 41 540 585
21/2 J 43( ) 300 220 190 16 45 670 710
47 600 220 190 16 45 670 7104( ) 600 220 190 16 45 755 795
Size( )×( )
Connect-flangeRating
InletRatingASME
Dimensions
E P F Q
Approx. Height HACap TypeA,B C,D,E
3/4 D 1(11/2 )×(2)
1( ) 150 160 130 18.5 41 470 5152( ),3( ) 300 160 130 18.5 41 470 515
4( ) 600 160 130 18.5 41 470 515
1 DE 2
(2)×(3)
1( ) 150 160 125 18.5 41 470 5152( ),3( ) 300 160 125 18.5 41 470 515
4( ) 600 160 125 18.5 44.5 470 515
11/2 F 2(21/2 )×(3)
1( ) 150 175 152.5 18.5 47.5 550 5952( ) 300 175 152.5 18.5 47.5 550 5953( ) 300 175 152.5 18.5 47.5 550 5954( ) 600 175 152.5 18.5 47.5 550 595
11/2 G 21/2
(21/2 )×(4)
1( ) 150 180 152.5 18.5 47.5 555 6002( ) 300 180 152.5 18.5 47.5 555 6003( ) 300 180 152.5 18.5 47.5 555 6004( ) 600 180 152.5 18.5 47.5 555 600
11/2 H 3(3)×(5)
1( ) 150 185 150 18.5 47.5 580 6252( ) 300 185 150 18.5 47.5 580 625
2 H 3(3)×(5)
3( ) 300 190 150 18 50 590 63547 600 190 150 18 50 590 635
4( ) 600 200 170 18 50 630 680
2 J 3(3)×(5)
1( ) 150 185 160 18 42 560 6052( ) 300 185 160 18 47 560 605
21/2 J 4(4)×(6)
3( ) 300 230 190 16 55 680 72047 600 230 190 16 55 680 720
4( ) 600 230 190 16 55 765 805• Rc1/2 is normal, but can produce NPT(F)1/2 by a request
about the connection of an inlet and an outlet of the jacket.
JNO-J/JNB-J
9
Selection of the safety valveWhen an engineer decides really a safety valve, the person confirms the application law or standard, and it is necessary to know fluid condition in detail as possible exactly. Additionally, it is necessary to consider the specification of the material for the corrosive fluid (see page15 on the material code) and the cap type (see page 12). In the sizing in particular, the engineer must understand requirements such as relieving pressure, back pressure, the required relieving capacity, molecular weight, relieving temperature as possible exactly.For example, when an engineer calculates liquid service with gas by mistake and greatly roughly estimates required relieving capacity, The calculated safety valve size is large, and a safety valve having the orifice area that is excessive than really required orifice area may be chosen.When such a safety valve operates, chattering and hunting phenomenon occur and may cause the damage of equipment and the safety valve.
The selection of the safety valve, please follow the following orders.
1. Calculation of the required relieving areaPlease calculate required relieving area according to each application law or standard shown in page10. Please consider the correction such as the overpressure or viscosity coefficient.
2. Determination of the orifice sizeThe determination orifice is larger than previous calculated required relieving area and the nearest orifice is chosen.
3. Determination of a valve type, a size and the connectionThe combination of inlet size, outlet size and connection rating for each orifice was decided based on longtime experience and experiment to meet design (strength, flow rate) in the relieving.Therefore, please avoid evaluating a special safety valve except this combination. Additionally, it is the reason that it does not often satisfy relieving capacity to select excessive orifice except this combination.Please choose this combination by "Size, Pressure, Temperature limits" of page16 to 43.
4. Selection of a cap and the special material (see page12, 13, 15)
10 11
The application low and calculating equationFrom applicable code / standard and state of service fluid, select one of calculation form Nos. from the following table. And then make sure that allowable overpressure conform to purpose of the overpressure protection at the customer's specification. Calculate required effective discharge area by substituting each value in the service conditions of customer's inquiry with each designation in the following equation. Any specific coefficient to be substituted in the relevant equation can be referred in ENGINEERING HANDBOOK (PRESSURE RELIEF VALVES).
Calculation From No.
State of Fluids
Applicable Code and Standard
Equations for Required Orifice Area Unit of Area Descriptions for Designation in Equation
SI01 Steam
MOTOYAMA STANDARD/API STD 520, PART I Sizing and Selection (2008) /ASME Sec. Vll (PRESSURE VESSEL)
A´ =190.5×W´
P1×K×Kw×Kc×Kn×Kshmm2
A' = required effective discharge area (mm2)W' = required flow rate (kg/h)P1 = the upstream relieving pressure (kPaA)
P1=P(1+OVRP)+101.3P=set pressure (kPaG)OVRP=allowable overpressure (%)
When 207kPaG of set pressure and 10% overpressure is required, P1 will beP1=P+21+101.3
K = effective coefficient of discharge, K=0.975Kw = backpressure correction factor, for conventional
PRV, Kw is Kw=1.0.Kc = combination correction factor for installation
with a rupture disk upstream of the PRVKc = 1.0, when a rupture disk is not installed;Kc = 0.9, when a rupture disk is installed
in combination with a PRV and the combination does not have a certified value;
Kn = correction factor for the Napier equation and Kn=1.0 (P1 ≦ 10339 kPaA)
Ksh= superheat correction factor, for saturated steam at any pressure, Ks 1.0.
SI03Gas&
Vapor
MOTOYAMA STANDARD /API STD 520,PART I Sizing and Selection (2008) /ASME Sec.Vlll (PRESSURE VESSEL)
W´A´ =
C×K×P1×Kw×KcM
Z×Tmm2
A' = required effective discharge area (mm2)W' = required flow rate (kg/h)P1 = the upstream relieving pressure (kPaA)
P1=P(1+OVRP)+101.3P=set pressure (kPaG)OVRP=allowable overpressure (%)
When 207kPaG of set pressure and 10% overpressure is required, P1 will beP1=P+21+101.3
K = effective coefficient of discharge, K=0.975C = a function of ratio of the ideal gas specific
heats (k=Cp/Cv) of gas or vapor at inlet relieving temperature
Kw = backpressure correction factorwhich is the capacity correction factor due to back pressure.
Kc = combination correction factor forinstallation with a rupture disk upstream of the PRVKc = 1.0, when a rupture disk is not installed;Kc = 0.9, when a rupture disk is installed
in combination with a PRV and the combination does not have a certified value;
M = molecular weight of the service fluidZ = compressibility factor. If it is unknown, use Z=1.0T = relieving temperature (Absolute Temperature: K)
11
Calculation From No.
State of Fluids
Applicable Code and Standard
Equations for Required Orifice Area Unit of Area Descriptions for Designation in Equation
SI04 Liquid
MOTOYAMA STANDARD/API STD 520, PART I Sizing and Selection(2008)/ASME Sec.Vlll (PRESSURE VESSEL)
(Only for Style JLT-JNO/JNB and Series #900)
mm2
A' = required effective discharge area in mm2 ;W' = required flow rate, L/Min ;P = upstream relieving pressure in kPaG;
this is P1=P(1+OVRP)P=set pressure, kPaGOVRP = allowable overpressure, %
PB = backpressure in kPaGKK = effective coefficient of discharge K=0.65Kw = backpressure correction factor which is the
capacity correction factor due to backpressure. For conventional PRVs, use Kw=1.0
Kc = combination correction factor for installation with a rupture disk upstream of the PRVKc = 1.0, when a rupture disk is not installed;Kc = 0.9, when a rupture disk is installed
in combination with a PRV and the combination does not have a certified value;
Kv = capacity correction factor due to viscosity.G = specific gravity of the liquid at the flowing
temperature referred to water at standard conditions;
11.78×W´A´ =
K×Kw×Kc×Kv×P1−PB
G
SI44 Liquid
API STD 520, PART I Sizing and Selection (2008)
(For PRVa not requiring capacity certification)
mm2
A' = required effective discharge area in mm2 ;W' = required flow rate, L/Min;P = set pressure in kPaGPB = total backpressure in kPaGK = effective coefficient of discharge, K=0.62Kw = backpressure correction factor which is the
capacity correction factor due to backpressure. For conventional PRVs, use Kw=1.0
Kc = combination correction factor for installation with a rupture disk upstream of the PRVKc = 1.0, when a rupture disk is not installed;Kc = 0.9, when a rupture disk is installed
in combination with a PRV and the combination does not have a certified value;
Kv = capacity correction factor due to viscosity.Kp = correction factor due to overpressure;
at 25% overpressure, Kp is equal to 1.0.G = specific gravity of the liquid at the flowing
temperature referred to water at standard conditions;
11.78×W´A´ =
K×Kw×Kc×Kv×Kp×1.25P−PB
G
SI00 Steam
ASME Sec. l (POWER BOILER)
A´ =W´
5.25×K×P1×Kshmm2
A' = required effective discharge area (mm2)W' = required flow rate (kg/h)P1 = the upstream relieving pressure (kPaA)
P1=P(1+OVRP)+0.101P=set pressure (MPaG)OVRP=allowable overpressure (%)
When set pressure is less than 0.467PaG, P1 will beP1=P+0.014+0.101
Ksh= superheat correction factor, for saturated steam at any pressure, Ksh=1.0.
K = effective coefficient of discharge, K=0.878
12 13
Caps and lifting leversAvailable Cap Types
Cap Types Top Construction Application
Type A
Screwed Cap
Cap
Gasket
This is standard cap. If no other cap type is required, it is automatically selected.
Type B
Screwed Cap and Test Gag
Cap Plug
Cap Top
Test Gag
Cap Plug Gasket
Gasket
When hydrostatic test is carried out while leaving the PRV installed on the over pressure system or vessel, type B is recommended to hold the valve seatclose with the Test Gag.
Type C
Open Cap and Regular Lifting
Lever
Spindle Nut
Cap
Lever
Pin
Pin
Forked Lever
Cap Set Screw
Cap Plug
Cap Plug Gasket
Test Gag
For steam and air service where the valve cap is not required to be tight on the discharge side and where conditions are such that periodic testing is desirable. Regular lifting levers may be furnished with a supplementary gagging device on special order. When inlet pressure of PRV is pressurized at 75% and over of set pressure, you can lift the lever up to discharge and relief the pressure.
13
Cap Types Top Construction Application
Type D
Bolted Cap and Packed Lifting
Lever
Cap
Cap stud Bolt
Cap stud Nut Lever
Spindle Nut
Casket
Dog
Dog Shaft
For services where tightness on the discharge side is necessary and where conditions are such that periodic testing is desirable. Also recommended for hot water services. When inlet pressure of PRV is pressurized at 75% and over of set pressure, you can lift the lever up to discharge and relief the pressure.
Type E
Bolted Cap and Packed Lifting Lever and Test
Gag
Cap
Cap Plug
Cap Plug Gasket
Cap Stud Bolt
Cap Stud Nut
Spindle Nut
Gasket
Dog
Test Gag
Dog Shaft
Lever
Valves with screwed caps, packed levers or bolted caps can be fitted to accommodate test rods which will hold the valve closed when the equipment on which are installed is hydrostatically tested.
Type G
Bolted Cap
Cap
Cap Stud Bolt
Cap Stud Nut
Gasket
Bolted Cap is available on request as option. Better seal tightness than that of screwed cap can be obtained,
Type H
Bolted Cap and Test Gag
Cap
Cap Plug
Cap Plug Gasket
Cap Stud Bolt
Gasket
Test Gag
Cap Stud Nut
Type G Bolted Cap changes to Type H Bolted Cap and Test Gag.
14 15
Standard valve materialsJNO/JNB valve materials
● = Recommended spare parts◇ = Style JNB employs 316 St. St.※ 1 For steam service, CoCr alloy is processed.※ 2 Guide Stem used J~T Orifice, D~H Orifice is one Piece Disc Holder.※ 3 See Page 7 for O-Ring Soft Seat materials and Pressure/temperature limits.
Ref.
No.Part Name
–29˚Cto +232˚C
JNO/JNB ( ) 5
+233˚Cto +427˚C
JNO/JNB ( ) 6
+428˚Cto +538˚C
JNO/JNB ( ) 7
–59˚C to –30˚C
JNO/JNB ( ) 4
–100˚C to –60˚C
JNO/JNB ( ) 3
01
02
03
04
● 05
● 5C
5D
● 06
07
08
09
● 10
● 11
12
13
14
15
16
● 18
● 19
20
21
22
● 23
Body
Nozzle
Nozzle Ring
Set Screw
Disc Holder
Bellows
Guide Stem ※ 2
Disc lnsert
O-Ring ※ 3
Guide
Spindle
Spring
Spring Washer (s)
Bonnet
Bonnet Stud
Bonnet Nut
Adjusting Bolt
Adj. Bolt Nut
Set Screw Gasket
Guide Gasket
Seal & Wire
Seal Clip
A Cap
Cap Gasket
Carbon Steel
304 St. St. ※ 1
316 St. St.
304 St. St.
304 St. St. ※ 1
316L St. St.
304N2 St. St.
304 St. St. ※ 1
304 St. St. ※ 1
420 St. St.
Carbon Steel
Steel
Carbon Steel
Alloy Steel
Steel
420 St. St.
Steel
Soft Steel
Soft Steel
St. St. & Tin
St. St.
Carbon Steel
Soft Steel
Alloy Steel
Chrome Moly Steel
Chrome Moly Steel 304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 N2 St. St.
304 St. St.
Carbon Steel
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
◇
◇
◇
316 St. St.
316 St. St.
304 St. St.
316 St. St.
–268˚Cto –101˚C
JNO/JNB ( ) 2
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
NBR,FKM,Q,Rubber
15
Special valve materialsSpecial materials
Ref.
No.Part Name
Standard Material
JNO/JNB ( ) 5
SCPH 2/304 St.St.
( )( ) SO4
SCPH 2/316 St.St.
( )( ) S1 ( )( ) S4
304 St.St.
( )( ) SO5 ( )( ) SO
01
02
03
04
05
5C
※5D
06
7
08
09
10
11
12
13
14
15
16
20
22
Body
Nozzle
Nozzle Ring
Set Screw
Disc Holder
Bellows
Guide Stem
Disc lnsert
O-Ring ※ 3
Guide
Spindle
Spring
Spring Washer (s)
Bonnet
Bonnet Stud
Bonnet Nut
Adjusting Bolt
Adj. Bolt Nut
Gasket
Seal & Wire
A Cap
Carbon Steel
304 St. St.
316 St. St.
304 St. St.
304 St. St.
316L St. St.
304N2 St. St.
304 St. St.
NBR, FKM, Q, Rubber
304 St. St.
420 St. St.
Carbon Steel
Steel
Carbon Steel
Alloy Steel
Steel
420 St. St.
Steel
Soft Steel
St. St.
Carbon Steel
304 St. St.
304 St. St.
304 St. St.
316 St. St.
316 St. St.
316 St. St.
420 St. St.
420 St. St.
Steel
Soft Steel
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304N2 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
304 St. St.
316 St. St.
304 St. St.
Ref.
No.Part Name
Standard Material
JNO/JNB ( ) 5
316 Stainless Steel
( )( ) S5 ( )( ) S
Carbon Steel/MONEL®
( )( ) M1 ( )( ) M4
MONEL®
( )( ) M5 ( )( ) M
01
02
03
04
05
5C※5D
6
7
08
09
10
11
12
13
14
15
16
20
22
Body
Nozzle
Nozzle Ring
Set Screw
Disc Holder
Bellows
Guide Stem
Disc lnsert
O-Ring ※ 3
Guide
Spindle
Spring
Spring Washer (s)
Bonnet
Bonnet Stud
Bonnet Nut
Adjusting Bolt
Adj. Bolt Nut
Gasket
Seal & Wire
A Cap
Carbon Steel
304 St. St.
316 St. St.
304 St. St.
304 St. St.
316L St. St.
304N2 St. St.
304 St. St.
NBR, FKM, Q, Rubber
304 St. St.
420 St. St.
Carbon Steel
Steel
Carbon Steel
Alloy Steel
Steel
420 St. St.
Steel
Soft Steel
St. St.
Carbon Steel
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
Carbon Steel
MONEL®
304 St. St.
304 St. St.
304N2 St. St.
MONEL®
304 St. St.
420 St. St.
Carbon Steel
Steel
Carbon Steel
420 St. St.
Steel
Soft Steel
Carbon Steel
MONEL®
MONEL®
MONEL®
MONEL®
MONEL®
MONEL®
MONEL®
304 St. St.
MONEL®
MONEL®
MONEL®
MONEL®
MONEL®
MONEL®
MONEL®/INCONEL®
MONEL®
〔Remarks〕The material Hastelloy® C is available to manufacture.The pressure-temperature tables and charts on page 16 to 43 apply to standard materials.※Guide Stem used J~T Orifice, D~H Orifice is one Piece Disc Holder.
Al Meta
16 17
Specifications-Styles JNO, JNB and JNO-HSizes, pressure‚ temperature limits
D Orifice0.709 cm2
(0.110 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
※Weight of D or E cap increases by 6kg.
Dimensions and Weights D Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
3/4 ×1
3/4 ×13/4 ×1
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
55, 56, 57, 65, 66, 67
75, 76, 77
1×2
1×2
1×2
11/2 ×2
11/2 ×3
95.0
95.0
95.0
105.0
105.0
105.0
105.0
139.5
110.0
110.0
110.0
114.5
114.5
114.5
139.5
178.0
395
395
395
405
405
405
445
475
440
440
440
450
450
450
515
545
10
10
10
15
15
15
20
32
31.3
31.3
31.3
39
39
39
51
63JNOJNB
15253545
556575
(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)
11/2 ×211/2 ×2
11/2 ×3(21/2)
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
16263646
566676
(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)
11/2 ×211/2 ×2
11/2 ×3(21/2)
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
JNOJNB
3747
576777
(3/4)1×2(1)(3/4)1×2(1)
11/2 ×211/2 ×2
11/2 ×3(21/2)
300600
150150
90015002500
300300300
14243444
(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)
150300300600
150150150150
13233343
(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)
150300300600
150150150150
12223242
(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)(3/4)1×2(1)
150300300600
150150150150
1.891.894.969.92
1.891.894.969.92
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3025.5441.36
12.7221.2341.36
1.961.961.961.96
4.134.135.10
1.581.581.581.58
3.443.443.44
20.020.052.0
104.0
156.0260.5421.8
13.020.043.286.8
20.020.020.020.0
129.7216.5421.8
42.142.152.0
20.020.020.020.0
42.142.152.0
20.020.0
42.142.152.0
16.116.116.116.1
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
35.135.135.1
16.116.116.116.1
35.135.135.1
16.116.1
35.135.135.1
13.020.043.286.8
129.7216.5421.8
5.620.028.858.0
86.8144.8241.1
35.871.3
107.2178.5297.4
15.130.2
45.775.9
126.5
1.581.581.581.58
3.443.443.44
1.581.58
3.443.443.44
1.961.961.961.96
4.134.135.10
1.961.96
4.134.135.10
1.271.964.248.51
12.7221.2341.36
0.551.962.825.68
8.5114.2023.64
3.516.99
10.5117.5129.16
1.482.96
4.487.44
12.41
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.581.581.581.58
1.581.581.581.58
1.581.581.581.58
19.319.350.6
101.2
19.319.350.6
101.2
19.319.350.6
101.2
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
Approx.Weight
(kg)TypeA※
17
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
D Orifice0.709 cm2
(0.110 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500, cl 2500
18 19
Specifications-Styles JNO, JNB and JNO-H
E Orifice1.264 cm2
(0.196 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
※Weight of D or E cap increases by 6kg.
Dimensions and Weights E Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
1×2
1×2
1×2
55, 56, 57, 65, 66, 67
75, 76, 77
11/2 ×2
11/2 ×3
105.0
105.0
105.0
105.0
139.5
114.5
114.5
114.5
139.5
178.0
405
405
405
445
475
450
450
450
515
545
15
15
15
20
32
39
39
39
51
63JNOJNB
15253545
556575
1×21×21×21×2
11/2 ×211/2 ×2
11/2 ×3(21/2)
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
16263646
566676
1×21×21×21×2
11/2 ×211/2 ×2
11/2 ×3(21/2)
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
JNOJNB
3747
576777
1×21×2
11/2 ×211/2 ×2
11/2 ×3(21/2)
300600
150150
90015002500
300300300
14243444
1×21×21×21×2
150300300600
150150150150
13233343
1×21×21×21×2
150300300600
150150150150
12223242
1×21×21×21×2
150300300600
150150150150
1.891.894.969.92
1.891.894.969.92
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3025.5441.36
12.7221.2341.36
1.961.961.961.96
4.134.135.10
1.581.581.581.58
3.443.443.44
20.020.052.0
104.0
156.0260.5421.8
13.020.043.286.8
20.020.020.020.0
129.7216.5421.8
42.142.152.0
20.020.020.020.0
42.142.152.0
20.020.0
42.142.152.0
16.116.116.116.1
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
35.135.135.1
16.116.116.116.1
35.135.135.1
16.116.1
35.135.135.1
13.020.043.286.8
129.7216.5421.8
5.620.028.858.0
86.8144.8241.1
35.871.3
107.2178.5297.4
15.130.2
45.775.9
126.5
1.581.581.581.58
3.443.443.44
1.581.58
3.443.443.44
1.961.961.961.96
4.134.135.10
1.961.96
4.134.135.10
1.271.964.248.51
12.7221.2341.36
0.551.962.825.68
8.5114.2023.64
3.516.99
10.5117.5129.16
1.482.96
4.487.44
12.41
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.581.581.581.58
1.581.581.581.58
1.581.581.581.58
19.319.350.6
101.2
19.319.350.6
101.2
19.319.350.6
101.2
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
Approx.Weight
(kg)TypeA※
19
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
E Orifice1.264 cm2
(0.196 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500, cl 2500
20 21
Specifications-Styles JNO, JNB and JNO-H
F Orifice1.980 cm2
(0.307 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
※Weight of D or E cap increases by 6kg.
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
15253545
556575
11/2 ×211/2 ×2
11/2 ×2
11/2 ×2
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
16263646
566676
11/2 ×211/2 ×2
11/2 ×2
11/2 ×2
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
JNOJNB
3747
576777
11/2 ×211/2 ×2
11/2 ×211/2 ×2
11/2 ×3(21/2)
300600
150150
90015002500
300300300
14243444
11/2 ×211/2 ×2
11/2 ×2
11/2 ×2
150300300600
150150150150
13233343
11/2 ×211/2 ×2
11/2 ×2
11/2 ×2
150300300600
150150150150
12223242
11/2 ×211/2 ×2
11/2 ×2
11/2 ×2
150300300600
150150150150
1.891.894.969.92
1.891.894.969.92
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3025.5434.47
12.7221.2334.47
1.961.961.961.96
5.105.105.10
1.581.581.581.58
3.443.443.44
20.020.052.0
104.0
156.0260.5351.5
13.020.043.286.8
20.020.020.020.0
129.7216.5351.5
52.052.052.0
20.020.020.020.0
52.052.052.0
20.020.0
52.052.052.0
16.116.116.116.1
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
35.135.135.1
16.116.116.116.1
35.135.135.1
16.116.1
35.135.135.1
13.020.043.286.8
129.7216.5351.5
5.620.028.858.8
86.8144.8241.1
35.871.3
107.2178.5297.4
15.130.2
47.178.4
130.8
1.581.581.581.58
3.443.443.44
1.581.58
3.443.443.44
1.961.961.961.96
5.105.105.10
1.961.96
5.105.105.10
1.271.964.248.51
12.7221.2334.47
0.551.962.825.68
8.5114.2023.64
3.516.99
10.5117.5129.16
1.482.96
4.487.44
12.41
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.581.581.581.58
1.581.581.581.58
1.581.581.581.58
19.319.350.6
101.2
19.319.350.6
101.2
19.319.350.6
101.2
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
Dimensions and Weights F Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
11/2 ×2
11/2 ×2
11/2 ×2
55, 56, 57, 65, 66, 67
75, 76, 77
11/2 ×3
11/2 ×3
124.0
124.0
124.0
124.0
139.5
120.5
152.5
152.5
165.0
178.0
495
495
495
510
585
540
540
540
555
680
20
24
24
32
42
41
43
43
51
63JNOJNB
Approx.Weight
(kg)TypeA※
21
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
F Orifice1.980 cm2
(0.307 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500, cl 2500
22 23
Specifications-Styles JNO, JNB and JNO-H
G Orifice3.245 cm2
(0.503 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
※Weight of D or E cap increases by 6kg.
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
15253545
556575
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
11/2 ×3(21/2)2×32×3
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
16263646
566676
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
11/2 ×3(21/2)2×32×3
150300300600
150150150150
90015002500
300300300
JNOJNBJNO-H
JNOJNB
JNOJNB
3747
576777
11/2 ×3(21/2)11/2 ×3(21/2)
11/2 ×3(21/2)2×32×3
300600
150150
90015002500
300300300
14243444
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
150300300600
150150150150
13233343
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
150300300600
150150150150
12223242
11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)11/2 ×3(21/2)
150300300600
150150150150
1.891.894.969.92
1.891.894.969.92
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3025.5425.54
12.7221.2325.54
1.961.961.961.96
5.105.105.10
1.581.581.581.58
3.243.243.24
20.020.052.0
104.0
156.0260.5260.5
13.020.043.286.8
20.020.020.020.0
129.7216.5260.5
52.052.052.0
20.020.020.020.0
52.052.052.0
20.020.0
52.052.052.0
16.116.116.116.1
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
33.033.033.0
16.116.116.116.1
33.033.033.0
16.116.1
33.033.033.0
13.020.043.286.8
129.7216.5260.5
5.620.028.858.8
86.8144.8241.1
35.871.3
107.2178.5263.6
15.130.2
45.775.9
126.5
1.581.581.581.58
3.243.243.24
1.581.58
3.243.243.24
1.961.961.961.96
5.105.105.10
1.961.96
5.105.105.10
1.271.964.248.51
12.7221.2325.54
0.551.962.825.68
8.5114.2023.64
3.516.99
10.5117.5125.85
1.482.96
4.487.44
12.41
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.581.581.581.58
1.581.581.581.58
1.581.581.581.58
19.319.350.6
101.2
19.319.350.6
101.2
19.319.350.6
101.2
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
Dimensions and Weights G Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
11/2 ×3(21/2)
11/2 ×3(21/2)
11/2 ×3(21/2)
55, 56, 57
55, 56, 57, 65, 66, 67
11/2 ×3
2×3
124.0
124.0
124.0
124.0
155.5
120.5
152.5
152.5
165.0
171.5
495
495
495
565
590
540
540
540
660
685
22 (20)
26 (24)
26 (24)
37
45
41
43
43
51
70JNOJNB
Approx.Weight
(kg)TypeA※
23
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
G Orifice3.245 cm2
(0.503 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500, cl 2500
24 25
Specifications-Styles JNO, JNB and JNO-H
H Orifice5.064 cm2
(0.785 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
※Weight of D or E cap increases by 6kg.
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
15253545
5565
11/2 ×311/2 ×3
2×32×3
2×32×3
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
16263646
5666
11/2 ×311/2 ×3
2×32×3
2×32×3
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
3747
5767
2×32×3
2×32×3
300600
150150
150300
150300
14243444
11/2 ×311/2 ×3
2×32×3
150300300600
150150150150
13233343
11/2 ×311/2 ×3
2×32×3
150300300600
150150150150
12223242
11/2 ×311/2 ×3
2×32×3
150300300600
150150150150
1.891.894.969.92
1.891.894.969.92
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3018.96
12.7218.96
1.961.961.961.96
1.965.10
1.581.581.581.58
1.582.86
20.020.052.0
104.0
156.0193.3
13.020.043.286.8
20.020.020.020.0
129.7193.3
20.052.0
20.020.020.020.0
20.052.0
20.020.0
20.052.0
16.116.116.116.1
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
16.129.1
16.116.116.116.1
16.129.1
16.116.1
16.129.1
13.020.043.286.8
129.7193.3
5.620.028.858.8
86.8144.8
35.871.3
107.2178.5
15.130.2
45.775.9
1.581.581.581.58
1.582.86
1.591.59
1.582.86
1.961.961.961.96
1.965.10
1.961.96
1.905.10
1.271.964.248.51
12.7218.96
0.551.962.825.68
8.5114.20
3.516.99
10.5117.51
1.482.96
4.487.44
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.581.581.581.58
1.581.581.581.58
1.581.581.581.58
19.319.350.6
101.2
19.319.350.6
101.2
19.319.350.6
101.2
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
Dimensions and Weights H Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37,47
42, 43, 44, 45, 46
11/2 ×3
2×3
55, 56, 57, 65, 66, 67 2×3
130.5
130.5
154.0
124.0
124.0
162.0
510
510
625
555
555
720
23
28
50
41
43
2×3 154.0 162.0 570 620 3643
57JNOJNB
Approx.Weight
(kg)TypeA※
25
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
H Orifice5.064 cm2
(0.785 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500
26 27
Specifications-Styles JNO, JNB and JNO-H
J Orifice8.303 cm2
(1.287 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
※Weight of D or E cap increases by 6kg.
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
15253545
5565
2×32×3
3(21/2)×43(21/2)×4
3×43×4
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
16263646
5666
2×32×3
3(21/2)×43(21/2)×4
3×43×4
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
3747
5767
3(21/2)×43(21/2)×4
3(21/2)×4
3×4
300600
150150
9001500
150300
14243444
2×32×3
3(21/2)×4
3(21/2)×4
150300300600
150150150150
13233343
2×32×3
3(21/2)×4
3(21/2)×4
150300300600
150150150150
12223242
2×32×3
3(21/2)×4
3(21/2)×4
150300300600
150150150150
1.891.893.454.30
1.891.893.454.30
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3018.61
12.7218.61
1.961.961.961.96
1.964.13
1.581.581.581.58
1.581.58
20.020.052.0
104.1
156.0189.8
13.020.043.286.8
20.020.020.020.0
129.7189.8
20.042.1
20.020.020.020.0
20.042.1
20.020.0
20.042.1
16.116.116.116.1
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
16.116.1
16.116.116.116.1
16.116.1
16.116.1
16.116.1
13.020.043.286.8
129.7189.8
5.620.028.858.8
86.8144.8
35.871.3
107.2178.5
15.130.2
45.775.9
1.581.581.581.58
1.581.58
1.581.58
1.581.58
1.961.961.961.96
1.964.13
1.961.96
1.964.13
1.271.964.248.51
12.7218.61
0.551.962.825.68
8.5114.20
3.516.99
10.5117.51
1.482.96
4.487.44
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.581.581.581.58
1.581.581.581.58
1.581.581.581.58
19.319.335.143.9
19.319.335.143.9
19.319.350.6
101.2
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
19.319.319.319.3
16.116.116.116.1
Dimensions and Weights J Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37,47
42, 43, 44, 45, 46
2×3
3×4
136.5
184.0
124.0
181.0
495
615
540
660
24
40
41
52
3×4 184.0 181.0 700 740 5552
55, 56, 57, 65, 66, 67 3×4 184.0 181.0 730 825 7068JNOJNB
Approx.Weight
(kg)TypeA※
27
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
J Orifice8.303 cm2
(1.287 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500
28 29
Specifications-Styles JNO, JNB and JNO-H
K Orifice11.858 cm2
(1.838 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
※Weight of D or E cap increases by 10kg.
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
15253545
5565
3×43×43×43×4
3×63×6
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
16263646
5666
3×43×43×43×4
3×63×6
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
3747
5767
3×43×4
3×63×6
300600
150150
9001500
150300
14243444
3×43×43×43×4
150300300600
150150150150
13233343
3×43×43×43×4
150300300600
150150150150
12223242
3×43×43×43×4
150300300600
150150150150
1.891.89 3.614.13
1.891.89 3.614.13
1.891.894.969.92
1.961.965.10
10.20
1.271.964.248.51
15.3015.30
12.7215.30
1.961.961.961.96
1.964.13
1.031.031.031.37
1.371.37
20.020.052.0
104.0
156.0156.0
13.020.043.286.8
20.020.020.020.0
129.7156.0
20.042.1
20.020.020.020.0
20.042.1
20.020.0
20.042.1
10.510.510.514.0
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
14.014.0
10.510.510.514.0
14.014.0
10.514.0
14.014.0
13.020.043.286.8
129.7156.0
5.620.028.858.8
86.8144.8
35.871.3
107.2156.0
15.130.2
45.775.9
1.031.031.031.37
1.371.37
1.031.37
1.371.37
1.961.961.961.96
1.964.13
1.961.96
1.964.13
1.271.964.248.51
12.7215.30
0.55 1.962.82 5.68
8.5114.20
3.516.99
10.5115.30
1.482.96
4.487.44
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
1.031.031.031.37
1.031.031.031.37
1.031.031.031.37
19.319.336.942.1
19.319.336.942.1
19.319.350.6
102.1
19.319.319.319.3
10.510.510.514.0
19.319.319.319.3
10.510.510.514.0
19.319.319.319.3
10.510.510.514.0
Dimensions and Weights K Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37,47
42, 43, 44, 45, 46
3×4
3×4
155.5
155.5
162.0
162.0
670
670
715
715
52
55
52
52
3×4 184.0 181.0 745 790 7052
55, 56, 57 3×6 198.5 216.0 850 985 7068
65, 66, 67 3×6 197.0 216.0 850 985 7068JNOJNB
Approx.Weight
(kg)TypeA※
29
Pressure-Temperature Limit Chart - To ASME (ANSI) cl 600
K Orifice11.858 cm2
(1.838 Sq. In.)Effective Area
Pressure-Temperature Limit Chart - ASME (ANSI) cl 900, cl 1500
30 31
※Weight of D or E cap increases by 10kg.
Specifications-Styles JNO, JNB and JNO-H
L Orifice18.406 cm2
(2.853 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
JNOJNB
15253545
55
3×43×44×64×6
4×6
150300300600
150150150150
900 150
JNOJNBJNO-H
JNOJNB
16263646
5666
3×43×44×64×6
4×64×6
150300300600
150150150150
9001500
150300
JNOJNBJNO-H
JNOJNB
3747
5767
4×64×6
4×64×6
300600
150150
9001500
150300
14243444
3×43×44×64×6
150300300600
150150150150
13233343
3×43×44×64×6
150300300600
150150150150
12223242
3×43×44×64×6
150300300600
150150150150
1.891.893.693.69
1.891.893.693.69
1.891.89 4.96 6.89
1.961.965.106.89
1.271.964.246.89
10.34 10.34
1.961.961.961.96
1.96
0.690.691.171.17
1.17
20.020.052.070.3
105.4
13.020.043.270.3
20.020.020.020.0
105.4 20.0
20.020.020.020.0
20.020.0
20.020.0
20.020.0
7.0 7.0
11.911.9
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
11.9
7.0 7.0
11.911.9
11.911.9
11.911.9
11.911.9
13.020.043.270.3
105.4105.4
5.620.028.858.0
86.8105.4
35.870.3
105.4105.4
15.130.2
45.775.9
0.690.691.171.17
1.171.17
1.171.17
1.171.17
1.961.961.961.96
1.961.96
1.961.96
1.961.96
1.271.964.246.89
10.3410.34
0.551.962.825.69
8.5110.34
3.516.89
10.3410.34
1.482.96
4.487.44
1.891.89 1.891.89
1.891.89 1.891.89
1.891.89 1.891.89
0.680.681.171.17
0.680.681.171.17
0.680.681.171.17
19.319.337.637.6
19.319.337.637.6
19.319.350.670.3
19.3 19.3 19.3 19.3
7.0 7.0
11.911.9
19.3 19.3 19.3 19.3
7.0 7.0
11.911.9
19.3 19.3 19.3 19.3
7.0 7.0
11.911.9
Dimensions and Weights L Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
3×4
4×6
4×6
55, 56, 57, 66, 67 4×6
155.5
179.5
179.5
197.0
165.0
181.0
203.0
222.0
745
775
790
870
785
815
835
1005
65
81
97
110
49
55
58
74JNOJNB
Approx.Weight
(kg)TypeA※
32 33
※Weight of D or E cap increases by 10kg.
Specifications-Styles JNO, JNB and JNO-H
M Orifice23.225 cm2
(3.60 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
15253545
4×64×64×64×6
150300300600
150150150150
16263646
4×64×64×64×6
150300300600
150150150150
JNOJNB 56
3747
4×6
4×64×6
900 150
300600
150150
JNOJNBJNO-H
JNOJNB
57 4×6 900 150
14243444
4×64×64×64×6
150300300600
150150150150
13233343
4×64×64×64×6
150300300600
150150150150
12223242
4×64×64×64×6
150300300600
150150150150
1.891.89 3.614.13
1.891.89 3.614.13
1.891.894.967.58
1.96 1.965.10 7.58
1.27 1.96 4.24 7.58
1.961.961.961.96
0.550.551.101.10
20.020.052.077.3
13.020.043.277.3
20.020.020.020.0
20.020.020.020.0
20.020.0
20.0
19.319.319.319.3
5.65.6
11.211.2
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
5.65.6
11.211.2
11.211.2
20.0 11.2
11.3
5.65.6
11.211.2
13.020.043.277.3
5.620.028.858.0
35.870.3
15.130.2
77.3 77.3
77.3 45.7
0.550.551.101.10
1.10
1.101.10
1.961.961.961.96
1.96
1.961.96
1.28 1.96 4.24 7.58
7.58
0.55 1.96 2.82 5.68
7.58
3.516.89
1.482.96
1.101.967.58 4.48
1.961.961.961.96
1.891.891.891.89
1.891.891.891.89
0.550.551.101.10
0.550.551.101.10
0.550.551.101.10
19.319.336.942.1
19.319.336.942.1
19.319.350.677.3
19.319.319.319.3
5.65.6
11.211.2
19.319.319.319.3
5.65.6
11.211.2
Dimensions and Weights M Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
4×6
4×6
4×6
56, 57 4×6
178.0
178.0
178.0
197.0
184.0
184.0
203.0
222.0
750
805
875
945
795
850
915
1080
81
95
113
120
55
55
59
65JNOJNB
Approx.Weight
(kg)TypeA※
34 35
※Weight of D or E cap increases by 10kg.
Specifications-Styles JNO, JNB and JNO-H
N Orifice27.999 cm2
(4.34 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
15253545
4×64×64×64×6
150300300600
150150150150
16263646
4×64×64×64×6
150300300600
150150150150
3747
4×64×6
300600
150150
JNOJNB
14243444
4×64×64×64×6
150300300600
150150150150
13233343
4×64×64×64×6
150300300600
150150150150
12223242
4×64×64×64×6
150300300600
150150150150
1.891.893.103.44
1.891.893.103.44
1.891.894.966.89
1.96 1.965.10 6.89
1.27 1.96 4.24 6.89
1.961.961.961.96
0.550.551.101.10
20.020.052.070.3
13.020.043.270.3
20.020.020.020.0
20.020.020.020.0
19.319.319.319.3
5.65.6
11.211.2
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
5.65.6
11.211.2
20.020.0
11.211.2
5.65.6
11.211.2
13.020.043.270.3
5.620.028.858.0
35.870.3
15.130.2
0.550.551.101.10
1.101.10
1.961.961.961.96
1.961.96
1.271.964.246.89
0.55 1.96 2.82 5.68
3.516.89
1.482.96
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
0.550.551.101.10
0.550.551.101.10
0.550.551.101.10
19.319.331.635.1
19.319.331.635.1
19.319.350.670.3
19.319.319.319.3
5.65.6
11.211.2
19.319.319.319.3
5.65.6
11.211.2
Dimensions and Weights N Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
4×6
4×6
4×6
197.0
197.0
197.0
209.5
209.5
209.5
905
905
905
950
950
950
111
111
119
55
55
59
Approx.Weight
(kg)TypeA※
36 37
※Weight of D or E cap increases by 24kg.
Specifications-Styles JNO, JNB and JNO-H
P Orifice41.161 cm2
(6.38 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
15253545
4×64×64×64×6
150300300600
150150150150
16263646
4×64×64×64×6
150300300600
150150150150
3747
4×64×6
300600
150150
JNOJNB
14243444
4×64×64×64×6
150300300600
150150150150
13233343
4×64×64×64×6
150300300600
150150150150
12223242
4×64×64×64×6
150300300600
150150150150
1.201.202.063.31
1.201.202.063.31
1.891.893.626.89
1.961.963.62 6.89
1.271.963.626.89
1.961.961.961.96
0.550.551.131.13
20.020.036.970.3
13.020.036.970.3
20.020.020.020.0
20.020.020.020.0
19.319.319.319.3
5.65.6
10.610.6
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
5.65.6
10.610.6
20.020.0
10.510.5
5.65.6
10.510.5
13.020.036.970.3
5.620.028.858.0
35.870.3
15.130.3
0.550.551.131.13
1.031.03
1.961.961.961.96
1.961.96
1.271.963.626.89
0.551.962.825.69
3.516.89
1.482.96
1.891.891.891.89
1.891.891.891.89
1.891.891.891.89
0.550.551.031.03
0.550.551.031.03
0.550.551.031.03
12.312.321.133.8
12.312.321.133.8
19.319.336.970.3
19.319.319.319.3
5.65.6
10.510.5
19.319.319.319.3
5.65.6
10.510.5
Dimensions and Weights P Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
4×6
4×6
4×6
181.0
225.5
225.5
228.5
254.0
254.0
935
980
1030
1050
1095
1145
115
122
171
52
58
58
Approx.Weight
(kg)TypeA※
38 39
※Weight of D or E cap increases by 24kg.
Specifications-Styles JNO, JNB and JNO-H
Q Orifice71.290 cm2
(11.05 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
15253545
6×86×86×86×8
150300300600
150150150150
16263646
6×86×86×86×8
150300300600
150150150150
3747
6×86×8
300600
150150
JNOJNB
14243444
6×86×86×86×8
150300300600
150150150150
13233343
6×86×86×86×8
150300300600
150150150150
12223242
6×86×86×86×8
150300300600
150150150150
1.131.13 1.722.06
1.131.131.722.06
1.131.132.064.13
1.131.132.064.13
1.131.132.064.13
0.790.790.790.79
0.480.480.790.79
11.611.621.042.1
11.611.621.042.1
8.08.08.08.0
8.08.08.08.0
8.08.08.08.0
4.94.98.08.0
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
4.94.98.08.0
8.08.0
8.08.0
4.94.98.08.0
11.611.621.042.1
5.611.621.042.1
11.642.1
11.630.2
0.480.480.790.79
0.790.79
0.790.790.790.79
0.790.79
1.131.132.064.13
0.55 1.13 2.064.13
1.134.13
1.132.96
0.790.790.790.79
0.790.790.790.79
0.790.790.790.79
0.480.480.790.79
0.480.480.790.79
0.480.480.790.79
11.611.617.521.0
11.611.617.521.0
11.611.621.042.1
8.08.08.08.0
4.94.98.08.0
8.08.08.08.0
4.94.98.08.0
Dimensions and Weights Q Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
42, 43, 44, 45, 46, 47
6×8
6×8
6×8
239.5
239.5
239.5
241.5
241.5
241.5
1065
1065
1165
1180
1180
1280
220
220
260
57
57
68
Approx.Weight
(kg)TypeA※
40 41
Specifications-Styles JNO, JNB and JNO-H
R Orifice103.220 cm2
(16.0 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
15253545
6×86×86×106×10
150300300600
150150150150
16263646
6×86×86×106×10
150300300600
150150150150
3747
6×86×10
300600
150150
JNOJNB
14243444
6×86×8
6×106×10
150300300600
150150150150
13233343
6×86×86×106×10
150300300600
150150150150
12223242
6×86×86×106×10
150300300600
150150150150
0.370.37 1.031.37
0.370.371.031.37
0.680.68 1.582.06
0.680.68 1.582.06
0.680.68 1.582.06
0.41 0.410.680.68
0.41 0.410.680.68
7.07.0
16.121.0
7.07.0
16.121.0
4.24.27.07.0
4.24.27.07.0
4.24.27.07.0
4.24.27.07.0
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
4.24.27.07.0
4.27.0
4.27.0
4.24.27.07.0
7.07.0
16.121.0
7.07.0
16.121.0
7.021.0
7.021.0
0.41 0.410.680.68
0.410.68
0.41 0.410.680.68
0.410.68
0.680.68 1.582.06
0.550.68 1.582.06
0.692.06
0.682.06
0.41 0.410.680.68
0.41 0.410.680.68
0.41 0.410.680.68
0.41 0.410.680.68
0.41 0.410.680.68
0.41 0.410.680.68
3.83.8
10.514.0
3.83.8
10.514.0
7.07.0
16.121.0
4.24.27.07.0
4.24.27.07.0
4.24.27.07.0
4.24.27.07.0
Dimensions and Weights R Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26, 37
32, 33, 34, 35, 36
42, 43, 44, 45, 46, 47
6×8
6×10
6×10
239.5
239.5
239.5
241.5
266.5
266.5
1205
1205
1205
1320
1320
1320
231
250
260
58
68
68
Approx.Weight
(kg)TypeA※
41
Pressure-Temperature Limit Chart
R Orifice103.220 cm2
(16.0 Sq. In.)Effective Area
0.5 1.0 1.5 2.52.0
42 43
※Weight of D or E cap increases by 24kg.
Specifications-Styles JNO, JNB and JNO-H
T Orifice167.740 cm2
(26.0 Sq. In.)Effective Area
Low Set Pressure Limits:JNO=0.10 MPaG (1.0 kg/cm2G)JNB=0.17 MPaG (1.75 kg/cm2G)
Sizes and Pressure/Temperature Limits (See also Set Pressure Chart Opposite)
*Upper temperature limit of JNO-H-15, 25, 35 and 45 valves is +343˚C (+650F)
Valve Style
Valve Size StandardConnectionsASME (ANSI)
FlangesRaised Face
Maximum Set Pressure (MPaG) Back Press.Limit @ 38˚C
(MPaG)
Back Press.Limit @ 38˚C(kg/cm2G) Inlet
tem-pera-ture
InletMaximum Set Pressure (kg/cm2G)
Inlet–268˚C
to–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
–268˚Cto
–101˚C
–59˚Cto
–30˚C
–100˚Cto
–60˚C
–29˚Cto
38˚C* 232˚C 427˚C 538˚C JNO
JNB
Inlet Outlet
Inlet×
Outlet
JNOJNBJNO-H
15253545
8×108×108×108×10
150300300600
150150150150
16263646
8×108×108×108×10
150300300600
150150150150
37 8×10 300 150
JNOJNB
142434
8×108×108×10
150300300
150150150
132333
8×108×108×10
150300300
150150150
122232
8×108×108×10
150300300
150150150
0.340.340.44
0.340.340.44
0.440.440.82
0.440.44 0.822.06
0.440.440.822.06
0.20 0.200.410.68
0.20 0.200.410.68
4.54.58.4
21.0
4.54.58.4
21.0
2.1 2.14.2 7.0
2.1 2.14.2 7.0
2.12.14.2
2.12.14.24.2
–29˚Cto
232˚C
233˚Cto
427˚C
428˚Cto
538˚C
–30˚Cto
–59˚C
–60˚Cto
–100˚C
–101˚Cto
–268˚C
2.12.14.24.2
7.0 7.0
2.12.14.2
4.54.58.4
21.0
4.54.58.4
21.0
21.0 15.1
0.20 0.200.410.68
0.68
0.20 0.200.410.68
0.68
0.440.440.822.06
0.440.440.822.06
2.06 1.48
0.200.200.41
0.200.200.41
0.200.200.41
0.200.200.41
0.200.200.41
0.200.200.41
3.53.54.5
3.53.54.5
4.54.58.4
2.12.14.2
2.12.14.2
2.12.14.2
2.12.14.2
Dimensions and Weights T Orifice
Valve Style Valve Size
Valve Dimensions (mm)Center to Face Used To
Find Bolt LengthInlet Outlet
E P
Approximate HeightValve (Cap) TypeA, B, G C, D, EQ
JNOJNBJNO-H
12, 13, 14, 15, 16, 22, 23, 24, 25, 26
32, 33, 34, 35, 36, 37
45, 46
8×10
8×108×10
276.0
276.0
276.0
279.5
279.5
279.5
1410
1410
1410
1495
1495
1495
350
380
390
65
65
65
Approx.Weight
(kg)TypeA※
43
Pressure-Temperature Limit Chart
T Orifice167.740 cm2
(26.0 Sq. In.)Effective Area
0.5 1.0 1.5 2.52.0
44 45
Saturated steam capacities
Kilograms per Hour (90% Rating) at Set Pressure plus 10% overpressureMeet Requirements of ASME Boiler and Pressure Vessel Code, Section VIII.
(Unit : kg/h)
NOTE: For superheated steam multiply above capacities by correction factor Ksh.
SetPressure
(kg/cm2G)
ORIFICE LETTER AND EFFECTIVE AREA (cm2)
D0.709
1.01.52.02.5
3.03.54.04.55.0
5.56.06.57.07.5
8.08.59.09.5
10.0
11.012.013.014.015.0
16.017.018.019.020.0
22.024.026.028.030.0
32.034.036.038.040.0
42.044.046.048.050.0
55.060.065.070.075.0
80.085.090.095.0
100.0
7595
114134
154173193212232
274309344379413
430484539594648
703792882971
1060
10991239137915191658
18012030225924882717
25742901322835553882
39944501500955166023
50415681632169617602
60766848762083929163
893510069112041233913474
1544617431193962136023325
2240325248280943094033785
3640941033456585028354907
252271291310330
448483518553588
703758812867921
11501239132914181507
17981938207722172357
29463175340436323861
42094536486351905517
65317038754580538560
824288829523
1016310803
993510707114791225113023
1460915744168791801419149
2529027254292193118333148
3663139476423224516848013
5953264157687827340678031
349369389408428
623658692727762
9761031108511401195
15971686177518651954
24962636277629163055
40904319454847775006
58446171649868257152
90689575
100821059011097
1144412084127241336514005
1379414566153381611016882
2028421419225542368924824
3511337077390424100742971
5085953705565505939662242
82656872809190596530
101155
467506545584624
832902971
10411111
13041413152316321741
21332312249026692848
33353614389441734452
54635921637968377294
7806846091149768
10422
1211213126141411515616171
1528616566178471912720408
1842619969215132305724600
2709429363316333390336173
4690050830547595868862617
6793373624793168500790698
110404119653128903138152147402
663702741780819
11811250132013901459
18501960206921782288
30263205338435633741
47325011529155705850
77528210866891259583
1107611730123841303813692
1718518200192152023021244
2168922969242502553126811
2614427688292313077532319
3844340713429834525247522
6654770476744057833482264
96390102081107772113463119155
156651165901175150184399193649
898976
105411331211
15991738187820172157
25062725294331623380
40994456481451715529
64086967752680858644
1049911414123301324514161
1500016308176161892420232
2327425303273332936231392
2937231934344953705639617
3540638493415814466847756
5206256602611426568170221
9012297981
105839113697121556
12891368144615241603
22962436257527152854
35993818403642554473
58866244660169587316
92039761
103201087911438
1507615992169071782318738
2154022848241562546426772
3342135451374803951041539
4217944740473014986252424
5084353930570186010563192
7476179301838408838092920
129414137273145131152990160848
16811759183819161994
29943133327234123551
46924910512953485566
76738031838887469103
1199712556131141367314232
1965420569214852240023316
2808029388306963200433312
4356945598476274965751686
5498557546601076266965230
6628069367724557554278629
97460101999106539111079115619
168707
21902386258227782973
39004249459749465295
61136659702577528298
999710890117841267813571
1562917026184231982021218
2560527893301823247134760
3658239853431234639349663
56760618346690771918
7163378036844399084397246
3634894066
101785109503
126968139317149667161016
31693365356137573953
56435992634166897038
884593919938
1048411031
1446515359162521714618039
2261524012254092680628203
3704839337416264391546204
5293356203594736274366013
E1.264
135169204239
F1.980
211266320375
G3.245
346435524614
H5.064
541680820960
J8.303
886111513441573
K11.858
1266159319202247
L18.406
1964247229793486
M23.225
2479312037604400
N27.999
2989376045325304
P41.161
4395553066657800
Q71.290
76089573
1153713502
R103.22
11020138661671119557
T167.74
17910225342715931784
45
Air capacities
Normal cubic meters per minute at 15.6˚C plus 10% overpressureMeet Requirements of ASME Boiler and Pressure Vessel Code, Section VIII.
(Unit : Nm3/min)
SetPressure
(kg/cm2G)
ORIFICE LETTER AND EFFECTIVE AREA (cm2)
D0.709
1.01.52.02.5
3.03.54.04.55.0
5.56.06.57.07.5
8.08.59.09.5
10.0
11.012.013.014.015.0
16.017.018.019.020.0
22.024.026.028.030.0
32.034.036.038.040.0
42.044.046.048.050.0
55.060.065.070.075.0
80.085.090.095.0
100.0
1.6862.1212.5562.992
3.4273.8624.2984.7335.168
6.1026.8777.6538.4289.203
9.56410.77911.99413.20914.424
15.64117.62819.61521.60223.588
24.45327.56030.66633.77236.878
40.06145.14950.23855.32760.415
57.23764.50771.77779.04886.318
88.806100.087111.360122.640133.920
112.076126.313140.540154.780169.020
135.099152.259169.410186.580203.740
198.652223.885249.110274.350299.580
343.876387.555431.230474.910518.590
498.087561.354624.620687.880751.150
809.483912.305
1015.1201117.9401220.760
1323.5901426.4101529.2301632.0501734.870
9.97810.75311.52912.30413.079
15.63816.85318.06819.28320.498
25.57527.56229.54931.53633.522
39.98443.09046.19749.30352.409
65.50470.59375.68180.77085.858
93.588100.859108.129115.399122.670
145.200156.480167.760179.040190.320
183.250197.490211.720225.960240.200
220.900238.060255.220272.380289.540
324.810350.050375.280400.510425.750
562.270605.950649.630693.310736.990
814.420877.690940.950
1004.2201067.490
1837.6901940.5102043.3302146.1602248.980
13.85414.62915.40416.18016.955
21.71322.92824.14325.35726.572
35.50937.49639.48341.47043.456
55.51558.62161.72764.83367.940
90.94796.036
101.124106.213111.302
129.940137.210144.481151.751159.021
201.600212.890224.170235.450246.730
254.430286.670282.910297.140311.038
306.700323.860341.020358.180375.340
450.980476.210501.440526.680551.910
780.670824.350868.020911.700955.380
1130.7601194.0201257.2901320.5601383.830
2454.6202660.2602865.9003071.5503277.190
18.50520.05621.60623.15624.707
29.00231.43233.86236.29138.721
47.43051.40455.37759.35163.325
74.15280.36486.57792.78999.001
121.479131.656141.833152.011162.188
173.562188.102202.643217.184231.724
269.290291.850314.410336.970359.530
339.850368.320396.790425.270453.740
409.660443.980478.300512.620546.940
602.380652.840703.310753.770804.240
1042.7401130.1001217.4601304.8201392.180
1510.3601636.9001763.4301889.9702016.500
3482.8303688.4703894.1204099.7604305.400
26.25727.80729.35830.90832.458
41.15143.58146.01148.44050.870
67.29871.27275.24579.21983.193
105.213111.426117.638123.850130.063
172.365182.542192.720202.897213.074
246.265260.806275.346289.887304.427
382.090404.650427.210449.770472.330
482.210510.680539.150567.630596.100
581.260615.590649.910684.230718.550
854.710905.170955.640
1006.1101056.570
1479.5401566.9001654.2501741.6101828.970
2143.0402269.5702396.1102522.6402649.180
35.55938.66041.76144.86147.962
55.73060.58965.44970.30875.168
91.14099.087
107.034114.982122.929
142.487154.912167.337179.761192.186
233.429253.783174.138284.492314.847
333.509362.590391.671420.753449.834
517.450562.570607.700652.820697.940
653.040709.990766.930823.880880.820
787.190855.830924.470993.110
1061.760
1157.5001258.4401359.3701460.3001561.230
2003.6902178.4102353.1302523.8402702.560
51.06354.16457.26460.36563.466
80.02784.88789.74694.60699.466
130.876138.823146.771154.718162.665
204.610217.035229.460241.884254.309
335.201355.556375.910396.265416.619
478.915507.996537.078566.159595.240
743.060788.180833.300878.420923.540
937.770994.710
1051.6501108.6001165.540
1130.4001199.0401267.6801336.3201404.960
1662.1601763.1001864.0301964.9602065.890
2877.2803052.0003226.7103401.4303576.150
66.56669.66772.76875.86978.969
104.325109.185114.044118.904123.763
170.612178.560186.507194.454202.401
266.734279.158291.583304.007316.432
436.974457.328477.683498.037518.392
624.321653.403682.484711.565740.646
968.6701013.7901058.9101104.0301149.150
1222.4901279.4301336.3801393.3201450.270
1473.6101542.2501610.8901679.5301748.170
2166.8302267.7602368.6902469.6202570.500
3750.870
86.72194.473
102.225109.977117.728
135.912148.061160.210172.359184.508
222.269242.138262.006281.874301.742
347.494378.555409.617440.678471.740
569.278620.164671.050721.930772.820
813.350886.053958.756
1031.4501104.160
1261.9501374.7601487.5601600.360
1592.6301734.9901877.3502019.7102162.070
1919.7802091.3802262.9802434.590
2822.8003075.2003327.5003579.800
125.480133.232140.984148.736156.488
196.656208.805220.954233.103245.252
321.610341.478361.346381.214401.082
502.801533.863564.925595.986627.048
823.700874.590925.480976.360
1027.250
1176.8601249.5601322.2701394.9701467.670
5.6046.0396.4756.9107.345
7.7818.2168.6519.0879.522
10.39311.26312.13413.00513.876
14.74615.61716.48817.35918.229
19.97121.71223.45425.19526.936
28.67830.41932.16133.90235.644
37.38539.12740.86842.60944.351
48.70553.05857.41261.76566.119
70.47374.82679.18083.53387.887
E1.264
3.0023.7774.5525.327
F1.980
4.7045.9197.1348.349
G3.245
7.6949.681
11.66713.654
H5.064
12.02915.13518.24121.347
J8.303
19.70624.79529.88434.972
K11.858
28.15535.42642.69649.966
L18.406
43.68554.96566.24677.526
M23.225
55.13269.36883.60497.840
N27.999
66.45783.617
100.778117.938
P41.161
97.720122.953148.186173.419
Q71.290
169.158212.837256.517300.196
R103.22
245.017308.284371.552434.819
T167.74
398.198501.019603.841706.662
46 47
Water capacities (JLT liquid trim only)
Liters per Minute at Set Pressure plus 10% overpressure
(Unit :ℓ/min)
NOTE: Where back pressure exists, use instead of set pressure, the difference between set pressure and the back pressure.
SetPressure
(kg/cm2G)
ORIFICE LETTER AND EFFECTIVE AREA (cm2)
D0.709
1.01.52.02.5
3.03.54.04.55.0
5.56.06.57.07.5
8.08.59.09.5
10.0
11.012.013.014.015.0
16.017.018.019.020.0
22.024.026.028.030.0
32.034.036.038.040.0
42.044.046.048.050.0
55.060.065.070.075.0
80.085.090.095.0
100.0
46566573
80869298
103
142154165175184
223241258274289
367396423449473
572618661701739
9391014108411501212
13411448154816421731
20812248240325492687
26262837303332173391
31663420365638784088
46555028537557026010
8063870993119875
10410
1167512610134811429915072
1897320493219082323724494
108113118122126
193202210218226
303316329342354
496519540560580
775810843874905
12711328138214341484
18161896197420482120
28182944306431803291
35563715386640124153
42884478466148375007
63036584685371117361
1091811403118691231712749
1580816511171851783418460
2568926831279272898129999
130134138142146
233240247254261
365376387398408
599617635653670
935964992
10191045
15331580162616711714
21902257232323862448
33993504360537043801
42894421455046744796
51715330548556355782
76027836806382848500
1316713573139661434914722
1906519652202222077621315
3098231936328623376234639
153160166173179
273285297308319
428447466483500
702734764792820
10961145119212371280
17981878195520282100
25682682279228972999
39864163433344974655
50305253546856745874
60646333659268417081
891593119691
1005710410
1544016127167851741918030
2235623350243032522126106
3633037946394954098642425
185190196201207
330340350359369
517533548563578
847873899923947
13221363140314411478
21682235230023632424
30973192328533753463
48074955509952395375
60666253643466116782
73137538775779708177
1075111082114041171612021
1862219195197512029220820
2696227792285982938130145
4381645164464744774748988
217226236244253
387404420436452
606633659684708
9931038108011211160
15511620168617491811
25432656276428692969
36323793394840974241
56375888612863606583
71137430773380258307
8576895793239675
10014
1260713168137061422314722
2183622807237382463425499
261269277285292
466481495508522
731753775797817
11981235127113061340
18701928198420382091
30673161325333423429
43804515464647734897
67997008721174097602
85798843910093499592
1034310661109701127111564
1520515673161271656917000
2633527146279332869829444
300307314320327
534547559571583
837857876895914
13731405143714681498
21432193224222912338
35133596367737563834
50185136525253655475
77897973815283278499
989210060102861050710724
1184912128124011266712929
1742017830182301862219006
30171
343358373387400
612639665690714
9581001104210811119
15711641170817721835
24522561266627662863
40214200437145364695
57425998624364786706
891493109690
10056
1124811748122271268913134
13560141631474115297
19934208212167122489
414426439451463
738761783804825
11561192122612601293
18951953201020652119
29573048313732233306
48494999514352845422
69267139734675477743
E1.264
82101116130
F1.980
129158182204
G3.245
211259299335
H5.064
330405467522
J8.303
542664766857
K11.858
774948
10951224
L18.406
1201147216991900
M23.225
1516185721442398
N27.999
1828223925852891
P41.161
2687329238014250
Q71.290
4655570165837361
R103.22
674082559532
10657
T167.74
10954134151549117319
47
As system pressure approaches the valve set pressure, the differential force tending to hold the seats in contact is diminished. Consequently, to obtain an acceptable degree of tightness capability, the valve must be designed and built with a high level of quality.
MOTOYAMA pressure relief valves are carefully engineered and manufactures ti provide those features essential for good valve performance and continuous long term protection. The inherent high degree of seat tightness found in MOTOYAMA pressure relief valves is possible due to the following design features.
1. Positive alignment of the seats through generous guiding and ball joints.
2. Minimum distortion as a result of full nozzle construction and thermally balanced disc design.
3. Excellent flatness and surface finish of the seating surfaces by precision machining and custom lapping.
Cleanliness of the system and proper installation of the valve are also essential for good seat tightness.
DefinitionAmbiguous terms such as "bubble tight", "drop tight", "zero leakage" and "commercial tightness" have been used in the past. Since these terms were used without uniform definition, they lacked true practical meaning.
Now with the adoption of a standard that defines the terminology used to describe pressure relief devices (ASME Performance Test Code PTC-25.3), and the adoption of a standard describing a method of determining seat tightness of relief valves (API Standard 527), there should exist a degree of uniformity throughout the industry.
"Commercial" Seat Tightness Standard(API Standard 527)The following API Standard of "commercial" tightness has been adopted by industry and users in order to clarify testing methods and tightness standards for the sake of uniformity. It applies to pressure relief valves.
The API Standard is as follows:Scope:This standard describes a method of determining seat tightness of pressure relief valves as covered in API Standard 527 Seat Tightness of Pressure Relief Valves. The maximum acceptable leakage rates are defined for commercial pressure relief valves with, metal-to-metal and soft neats for set pressures up to 6000 psig (414 barg). If greater tightness is required it can be supplied but must be specified on the purchase order or inquiry. See page 6 for O-Ring soft seat pressure-temperature limits.
Test ApparatusA typical test arrangement for determining seat tightness for pressure relief valves is shown in Fig.1. Leakage measurement shall be made with use of a 5/16 in. (7.93 mm) OD tubing with 0.035 in. (.88 mm) wall. The tube end shall be cut square and smooth. It shall be parallel to and 1/2 in. (12.7 mm) below the surface of the water A clamp type seat leak apparatus is available from Crosby. Contact the factory.
ProcedureWith the valve mounted vertically, as shown in Fig. 1, the leakage rate in bubbles per minute shall be determined with pressure at the valve inlet held at 90 percent of the cold differential test pressure, except for valves set at 50 psig (3.44 barg) or below, in which case the pressure shall be held at 5 psig (.34 barg) below the cold differential test pressure. The test pressure shall be applied for a minimum of 1 minute for valves of inlet sizes through 2 in. (50.8 mm); 2 minutes for sizes 2-1/2, 3 and 4 in. (63.5, 76.2 and 101.6 mm); 5 minutes for sizes 6 in. and 8 in. (152.4 and 203.2 mm). Air at approximately atmospheric temperature shall be used as the pressure midium.
Tightness StandardThe leakage rate in bubbles per minute shall not exceed the values indicated in Table 1 below. For soft seated valves there shall be no leakage for one minute (zero bubbles for one minute)
Table 1
Maximum Seat Leakage RateMetal Seated Pressure Relief Valves
MOTOYAMA Seat Tightness Standard-Water Service Valves(Style JLT)MOTOYAMA pressure relief valves are checked for seat tightness by a quantitative seat leakage test. All of the test fluid passing through an assembled valve is collected and measured under the following test conditions:
1. The inlet pressure is adjusted to a test pressure which is 90% of the "Cold Differential Test Pressure". Valves set below 50 psig (3.44 barg) are tested at 5 psig (.34 barg) below the cold differential test pressure.
2. The seat leak pressure is maintained for a period of not less than ten minutes.
Allowable Leak RateThe maximum allowable leakage rate should not exceed 10 cubic centimeters per hour per inch of diameter of nominal valve inlet size. For nominal valve sizes of 1 inch(25.4 mm) or less the leakage rate shall not exceed 10 cubic centimeters per hour. For soft seated valves there shall be no leakage for one minute.
Seat tightness-metal-to-metal seatsPressure relief valve seat tightnessMetal-to-Metal seat and soft seat
SetPressure
psig(barg)
15-1000(1.03-68.9)
1500 (103.4)2000 (137.9)2500 (172.4)3000 (206.8)4000 (275.8)5000 (344.8)6000 (413.7)
40
6080
100100100100100
0.60
0.901.201.501.501.501.501.50
0.017
0.0260.0340.0430.0430.0430.0430.043
20
3040506080
100100
0.30
0.450.600.750.901.201.501.50
0.0085
0.0130.0170.0210.0260.0340.0430.043
MAX.Bubbles
PerMinute
Effective Orifice Sizes0.307 in.2 and Smaller
Effective Orifice SizesLarger Than 0.307 in.2
ApproximateLeakage RatePer 24 Hours
StandardCubicFeet
StandardCubic
Meters
StandardCubicFeet
StandardCubic
Meters
MAX.Bubbles
PerMinute
ApproximateLeakage RatePer 24 Hours
48 49
Valve installation
StorageRelief valves are often on hand at the job site months before they are actually installed. Unless they are properly stored and protected their performance may be affected injuriously. Roughness in handling may damage flanges or cause misalignment of the valve parts. It is best to leave valves in shipment cases, store them in a dry place and give them a protective covering until they are to be used.
InstallationInlet Piping–The valve should be mounted vertically in an upright position either directly on a nozzle from the pressure vessel or on a short connection fitting that provides direct and unobstructed flow between the vessel and the valve Installing a pressure relief valve in other than this recommended position might adversely affect its operations. Where rounded or beveled approaches cannot be provided ahead of the valve it is recommended that one size large riser or fitting be used. A valve should never be installed on a fitting having a smaller inside diameter than the inlet connection of the valve. Compliance with the above recommendations will assure clean positive valve operation.Many valves are damaged when first placed in service because of failure to clean the connections properly when installed. Both the valve inlet and the vessel and/or line on which the valve is mounted must be thoroughly cleaned of all foreign material. The inlet connection bolts or studs should be drawn down evenly to avoid straining the valve body with possible distortion of the nozzle flange or base. The design and analysis of the inlet piping for a pressure relief station must include all of the valve operating forces (reaction forces) as well as the installation loads and forces.
Outlet Piping–Discharge piping should be simple and direct. Where possible a short vertical pipe discharging into the atmosphere is the most desirable type of outlet piping, and affords little trouble. (See illustration.) However, if this is impractical and the discharge must be piped to some definite place, the precautions listed below should be carefully considered.
All Valves:1. MOTOYAMA valves are designed with reinforced inlet necks to
minimize effects of discharge piping loads. However, regardless of this reinforcement, discharge piping should be designed for minimum load on the valve under all conditions of valve operation.
2. Expansion joints or large radius bends of proper design and cold spring should be provided to prevent excessive strain on the valve body under normal operating conditions. An excessive expansion load is a continuous source of trouble in improperly designed installations. (See illustration below.)
3. The piping should be anchored to prevent any swaying or vibration while the valve is discharging.
4. Where possible, open drains should be provided to prevent any accumulation of corrosive media in the valve body.
Conventional Valves5. When two or more valves are installed to discharge into a common
header the discharge pressure due to the opening of one (or more) valve(s) may affect the opening pressure of the remaining valves in the system.
5a Closed Top Valves With Bonnets NOT VENTEDThe discharge line pressure of these valves will increase the opening pressure by the amount (p.s.i.) of the discharge pressure.
5b Closed Top Valves With Bonnets VENTEDThe set pressure of the remaining valves in the system will be reduced by the amount(p.s.i.) of the discharge pressure.
Where either of the above conditions are unacceptable the use of Style JNB Balanced Bellows valves as described below is recommended.
Note: Conventional Valves with vented bonnets are not suitable for continuous back pressure.
Bellows Valves5c The Style JNB Balanced Bellows Safety-Relief valve is particularly
adapted to installations where two or more relief valves must be vented into a closed exhaust system resulting in variable back pressures which would affect the performance of a conventional type relief valve. The metal bellows used in Style JNB is so designed that the effective area of the bellows is equivalent to that of the valve seat. Because of this balanced area design, back pressure surges, whether constant or variable, do not adversely affect the performance of the valve. These valves are regularly furnished with atmospheric vents from the bonnet.
Recommended Installation –Discharging to Atmosphere; Inlet Piping
Direct as above or as in other illustration.
Recommended Installation –Outlet Pipe Designed for Minimum Strain on Valve;
Inlet Piping Direct as above or as in other illustration.
DISCHARGE PIPE
49
Flanges and flange facing
Dimensions of flanges conform to current ASME standards. On full nozzle valve inlets, however the thicknesses are greater than the minimum required by ASME standards. Dimension X shown opposite should be used to determine bolt length. Dimension X remains the same for raised face or ring joint flanges and is found on pages 16 through 43.
All flange facings are finished with spiral serration. Concentric serration finish are optional. Flange facings on valves for marine or Navy use must follow government specifications. Drilling of inlet and outlet flange holes straddle the valve center line. Inlet and outlet flanges are spot faced on back for stud nuts. Center-to-face dimensions are Subject to tolerance of ±1/16"(1.5 mm) for valves through 4" inlet size and ±1/8"(3.2 mm) for valves with inlet size larger than 4".
In addition to standard raised face or ring joint flanges, tongue and groove or other facings are optionally available.
50 51
Equivalents and conversion factors
This table may be used in two ways: (1) Multiply the unit under column A by the figure under column B, the result is the unit under column C.
(2) Divide the unit under column C by the figure under column B, the result is then in the unit under column A.
Atmospheres
Atmospheres
Atmospheres
Atmospheres
Atmospheres
Atmospheres
14.697
1.033
29.92
760
407
33.90
Pounds per square inch
Kilograms per sq. cm.
Inches of mercury
Millimeters of mercury
Inches of water
Feet of water
Centimeters
Centimeters
Centimeters
Centimeters
Cubic Centimeters
Cubic feet
Cubic feet
Cubic feet per second
Cubic inches
Cubic inches
Cubic inches
Cubic meters per hour
0.3937
0.03281
0.01
0.01094
0.06102
7.48055
0.17812
448.833
16.39
0.004329
264.17
4.4
Inches
Feet
Meters
Yards
Cubic inches
Gallons
Barrels
Gallons per minute
Cubic centimeters
Gallons
Gallons
Gallons per minute
Feet
Feet
Feet
Feet of water
Feet of water
0.3048
0.3333
30.48
0.882
0.433
Meters
Yards
Centimeters
Inches of mercury
Pounds per square inch
Gallons (U.S.)
Gallons (U.S.)
Gallons (U.S.)
Gallons (Imperial)
Gallons (U.S.)
Gallons (U.S.)
Gallons of water
Gallons of liquid per
minuteGallons per minute
3785
0.13368
231
277.4
0.833
3.785
8.328
500× Sp.Gr.
0.002228
Cubic centimeters
Cubic feet
Cubic inches
Cubic inches
Gallons (Imperial)
Liters
Pounds (at 21˚C)
Pounds per hr. liquid
(at 21˚C)Cubic feet per second
Inches
Inches
Inches
Inches
Inches of mercury
Inches of mercury
Inches of mercury
Inches of mercury
Inches of water
Inches of water
2.54
0.0833
0.0254
0.02778
1.133
0.4912
0.0334
0.0345
0.03613
0.07355
Centimeters
Feet
Meters
Yards
Feet of water
Pounds per square inch
Atmospheres
Kilograms per sq. cm.
Pounds per square inch
Inches of mercury
Kilograms
Kilograms
Kilograms
Kilograms per minute
Kilograms per sq. cm.
Kilograms per sq. cm.
Kilograms per sq. cm.
2.205
0.001102
35.27
132.3
14.22
0.9678
28.96
Pounds
Short tons (2000 lbs.)
Ounces
Pounds per hour
Pounds per square inch
Atmospheres
Inches of mercury
AMULTIPLY
BBY
CTO OBTAIN
AMULTIPLY
BBY
CTO OBTAIN
Liters
Liters
Liters per hour
1000
0.2642
0.0044
Cubic centimeters
Gallons
Gallons per minute
Meters
Meters
Meters
Meters
3.281
1.0936
100
39.37
Feet
Yards
Centimeters
Inches
Pounds
Pounds
Pounds
Pounds
Pounds
Pounds per hour
Pounds per hour liquid
Pounds per sq. inch
Pounds per sq. inch
Pounds per sq. inch
Pounds per sq. inch
Pounds per sq. inch
Pounds per sq. inch
Pounds per sq. inch
453.6
0.0005
0.4536
0.000454
16
6.32/M. W.
0.002/
Sp. Gr. 27.684
2.307
2.036
0.0703
0.0680
51.71
0.7037
Grams
Short tons (2000 lbs.)
Kilograms
Metric tons
Ounces
Cubic feet per minute
Gallons per minute
liquid (at 21˚C)Inches of water
Feet of water
Inches of mercury
Kilograms per sq. cm.
Atmospheres
Millimeters of mercury
Meters of water
Specific Gravity
(of gas or vapors)Square centimeters
Square inches
28.97
0.1550
6.452
Molecular Wt.
(of gas or vapors)Square inches
Square centimeters
Water (cubic feet) 62.3 Pounds (at 21˚C)
Temperature
CENTIGRADE=5/9 (FAHRENHEIT –32)FAHRENHEIT=9/5 CENTIGRADE +32
51
Ordering Information
The primary purpose of Style JNO/JNB safety relief valves is to protect lives and property. In order to select the proper valve for your application, please provide the information listed below.
Details of the process fluid and conditions are especially important. If there is any doubt as to selection or application of valves or parts, please contact our International Sales Sect.
Ordering Information
QuantityNominal valve size (inlet × orifice × outlet)Valve styleInlet connection rating and facingOutlet connection rating and facingService (liquid, gas or vapor)Set pressureBack pressure if any, and whether constant or variableMaximum service temperature (˚C)Cap or lifting lever typeValve materialsSeat materialCode requirementsRequired capacityAccumulation (allowable overpressure)Molecular weight–vaporSpecific gravity–gases and liquidsViscosity–liquids
Example
54 × L × 6JNO-45600RF150RFair790PsiGatmosphereambient 15˚CType Cstandardmetal-to-metal standardASME Unfired Pressure Vessel Code Section VIII1217 Nm3/min10%–1.0–
PartsTo order parts, the following information should be included:
1. Quantity2. Part name, i.e. (disc insert)3. Size, style and valve number4. Serial number (from valve nameplate)5. Original purchase order number (if serial
number has been destroyed)
SpringsTo order springs, the required valve set pressure must also be specified in addition to the above parts information.
Replacement valvesTo replace a valve in service, the serial number, set pressure and previous order number should be specified.
52 53
Set position of nozzle ring at shipment
After the test is completed, it is necessary to lower the set position of the nozzle ring to the specified position (the position of the shipment state). Also,Please make sure to seal the set screw part.
Nozzle ring set position on test bench.
Rotate the nozzle ring to the left and raise it to the position where it hits the desk holder and lower it to the recommended ring position.
The nozzle ring is moved until the pop operation From the set position about 1 or 2 notches to the left side Please adjust it.
Nozzle Ring
Nozzle Ring
Nozzle
Nozzle
In
Out
Chamber
Chamber
Disk Holder
Disk Holder
Disk Insert
Disk Insert
Set ScrewThe clearance is wide
Nozzle Ring
Nozzle Ring
Nozzle
Nozzle
In
Out
Chamber
Chamber
Disk Holder
Disk Holder
Disk Insert
Disk Insert
Set ScrewThe clearance is narrow
This set is the ring position at shipment and recommended setting position.
In this state, since the gas supply capacity is small, the disk insert does not sufficiently lift up, so the set pressure is sure It may be difficult to recognize.
Because the clearance is narrow, you can temporarily lift the disk insert with a small amount of gas supply capacity.
NoteIf this nozzle ring position is used as it is, blowdown will not be performed reliably, causing chattering and damage to the parts.
①When checking set pressure with test benchRegarding the setting pressure check (popping test) by the test bench, the set pressure may not be confirmed because the capacity of the test bench is small. In that case, you will need to check the setting pressure by adjusting the set position of the nozzle ring.When adjusting the setting position of the nozzle ring, it is necessary to release the sealed part in the set screw part.
② About blowdown (blowdown pressure)At factory shipment, the ring position of the nozzle ring which adjusts the blowdown is shipped at the recommended ring position, The blowdown value is delivered depending on the fluid condition and the amount of fluid blown out used in the actual equipment, the piping and vessel capacity before and after the valve etc. It may differ from the design guarantee value stated in the written form and the inspection report.Please be forewarned that if you need to adjust the blowdown, you will need to make adjustments with actual equipment.
On site acceptance inspection
53
OTHER PRODUCTS
Series 900 ······ Thermal relief and small size
JPV ······ Pilot valves
Series H ······ For Steam
SIZEORIFICECONNECTION
TEMPERATURE
: ½×1~1×1: 0.074 to 0.11( in2): Threaded: ASME 150Lb to ASME 2500Lb: -450ºF to 750ºF
SIZEORIFICECONNECTION
APPLICATIONTEMPERATURE
Please refer to MCJ/E-902
Please refer to MC-C5112
Please refer to MCJ/E-C5114
◀HS
: 1D2 to 8T10: D(0.11 in2) to T(26 in2): ASME 150Lb to ASME 2500Lb: 30 to 6000psig: GAS or Vapor: -70ºF to 400ºF
SIZEHS
HSA
SIZEHC
HCA
: 1½F2 to 8T10: Max. Pressure 900psig,: Max. Temperatare 750ºF : Max. Pressure 900psig,: Max. Temperatare 1020ºF : 1½H3 to 6R10: Max. Pressure 1500psig,: Max. Temperatare 750ºF : Max. Pressure 3000psig,: Max. Temperatare 1020ºF
本 社 工 場 〒981-3697 宮城県黒川郡大衡村大衡字亀岡 5-2 TEL(022)344-4511(代表)FAX(022)344-4522E-mail : [email protected]
Main Office & Factory 5-2, Ohira Aza Kameoka, Ohira-mura, Kurokawa-gun, Miyagi, 981-3697, JapanTEL +81-22-344-4511 FAX +81-22-344-4522E-mail : [email protected]
http://www.motoyama-cp.co.jp
●販売・サービスネットワーク
東 京 支 店 〒210-0007 神奈川県川崎市川崎区駅前本町 10-5 クリエ川崎 11F TEL(044)381-8770(代表) FAX(044)381-8772
大 阪 支 店 〒550-0014 大阪市西区北堀江一丁目 12-19 クリモトビル 3F TEL(06)6535-8111(代表) FAX(06)6535-8655
国 際 営 業 部 〒210-0007 神奈川県川崎市川崎区駅前本町 10-5 クリエ川崎 11F TEL(044)381-8771 FAX(044)381-8773
札 幌 営 業 所 〒001-0912 札幌市北区新琴似 12条七丁目 1-47 TEL(011)766-1520 FAX(011)766-1521 リバティタウンP棟 101 号
東 北 営 業 所 〒981-3697 宮城県黒川郡大衡村大衡字亀岡 5-2 TEL(022)344-1761 FAX(022)344-1762大衡サービスセンター
上 越 営 業 所 〒942-0036 新潟県上越市大字東中島 2393 番地 TEL(025)542-5151 FAX(025)542-5252上越サービスセンター
関 東 営 業 所 〒290-0046 千葉県市原市岩崎西一丁目 5-19 TEL(0436)21-4400 FAX(0436)21-3540千葉サービスセンター
静 岡 営 業 所 〒422-8033 静岡市駿河区登呂二丁目 10-13 ハイツ富士 1F TEL(054)288-2237 FAX(054)288-2239
名古屋営業所 〒481-0012 愛知県北名古屋市久地野安田 36番地 TEL(0568)26-6681 FAX(0568)26-6631中部サービスセンター
阪神サービスセンター 〒561-0894 大阪府豊中市勝部二丁目 18-3 TEL(06)6854-7511 FAX(06)6854-7512
徳 山 営 業 所 〒745-0861 山口県周南市新地一丁目 6-11 TEL(0834)21-5012 FAX(0834)31-0450周南サービスセンター
四 国 営 業 所 〒792-0851 愛媛県新居浜市観音原町 1013-1 TEL(0897)40-0270 FAX(0897)40-0305新居浜サービスセンター
大 分 営 業 所 〒870-0108 大分市大字三佐字山ノ神 980-1 TEL(097)527-3704 FAX(097)522-2352大分サービスセンター
●海外関連会社本山阀门(大連)有限公司 〒116601 中国 遼寧省大連市金州新区港興大街 39-14-7 TEL +86-411-6589-1277 FAX +86-411-6589-1278
●海外販売代理店中国、韓国、台湾、シンガポール、インドネシア、マレーシア、サウジアラビア
●SALES AND SERVICE NETWORKOverseas Marketing & Sales Dept. :11th Floor, Clie Kawasaki, 10-5, Ekimaehoncho, Kawasaki-ku, Kawasaki-city, Kanagawa, 210-0007 Japan TEL +81-44-381-8771 FAX +81-44-381-8773Domestic Sales Branches : Tokyo, Osaka, Sapporo, Tohoku, Joetsu, Kanto, Shizuoka, Nagoya, Hanshin, Tokuyama, Shikoku, Oita
●OVERSEAS AFFILIATED COMPANYMOTOYAMA VALVE (DALIAN) CO., LTDGangxing Street 39-14-7, Jinzhou New District, Dalian-city, 116601 China TEL +86-411-6589-1277 FAX +86-411-6589-1278
●OVERSEAS NETWORKChina, Korea, Taiwan, Singapore, Indonesia, Malaysia, Saudi Arabia
■本カタログの記載内容は、商品の改良等のため予告なく変更することがありますので予めご了承下さい。■MOTOYAMA is continuously improving and upgrading its product design, specifications and/or dimensions. Information included herein is subject to change without notice.
■本カタログは正しい情報の提供を目的としたものであり、本製品の市場性また適合性の保証を証明するものではありません。■This catalog is supplied for information purpose only and should not be considered certified marketability and conformability of this product.
2019.10 SPP