bunker hedging
TRANSCRIPT
EDUSCAN ACDAMIC & TRAINING CENTRE
PROJECT ON Bunker Hedging
Completing my MBA in Banasthali University
India
Submitted by Usman Khalanthar
2008
2
CONTENTS Pages
1. Introduction 4
History
Nature of shipping industry
2. Chartering 11
Cargo Ship chartering
Types of chartering
Vessel types
3. Dry Bulk Carriers 16
Cargo ship
Charter Party
4. Implementing Hedging Technique on bunkering 24
Contract of affriegtment
Maritime Fuel
Implementing hedging Technique on COA
Analyzing with example
5. Conclusion 29
3
INTRODUCTION
4
The industry devoted to moving goods or passengers by water. Passenger operations
have been a major component of shipping, but air travel has seriously limited this aspect of the
industry. The enormous increase, however, in certain kinds of cargo, for example, petroleum, has
more than made up for the loss of passenger traffic. Although raw materials such as mineral ores,
coal, lumber, grain, and other foodstuffs supply a vast and still growing volume of cargo, the
transportation of manufactured goods has increased rapidly since World War II.
HISTORY
Commercial shipping began perhaps with the activities of the Phoenician merchants who
operated their own vessels, transporting goods in the Mediterranean. The practices they
developed were adopted by the merchants of ancient Greece and Rome and were continued by
the maritime powers through the middle Ages to modern times. The Venetians, from 1300 to 1500,
owned a huge merchant fleet that served the interests of the merchant traders and the city -state
exclusively. From 1600 to 1650 the Dutch ranked first in shipping activity, operating a globe-
circling tramp service for merchants of Western Europe.
Advances in the 19th Century.
Until the 19th century, ships were owned by the merchant or by the trading company;
common-carrier service did not exist.
On Jan. 5, 1818, the full-rigged American ship James Monroe, of the Black Ball Line,
sailed from New York City for Liverpool, inaugurating common-carrier line service on a
dependable schedule. A policy of sailing regularly and accepting cargo in less-than-shipload lots
enabled the Black Ball Line to revolutionize shipping.
Two technological developments furthered progress toward present-day shipping
practices: the use of steam propulsion and the use of iron in shipbuilding. In 1819 the American
sailing ship Savannah crossed the Atlantic under steam propulsion for part of the voyage,
pioneering the way for the British ship Sirius, which crossed the Atlantic entirely under steam in
1838. Iron was first used in the sailing vessel Ironsides, which was launched in Liverpool in 1838.
The opening of the Suez Canal in 1869 was of great economic importance to shipping.
Coinciding with the perfection of the triple-expansion reciprocating engine, which was both
5
dependable and economical in comparison with the machinery of the pioneer vessels, the
completion of the canal made possible rapid service between Western Europe and Asia. The first
steam-propelled ship designed as an oceangoing tanker was the Glückauf, built in Great Britain in
1886. It had 3020 deadweight tons (dwt; the weight of a ship's cargo, stores, fuel, passengers,
and crew when the ship is fully loaded) and a speed of 11 knots.
The 20th Century.
Among the technological advances at the turn of the century was the development by the
British inventor Charles A. Parsons (1854–1931) of the compound steam turbine, adapted to
maritime use in 1897. In 1903 the Wandal, a steamer on the Volga River, was powered by the first
diesel engine used for ship propulsion. The Danish vessel Selandia was commissioned as the first
seagoing motor ship in 1912.
After World War I significant progress was made especially in the perfection of the
turboelectric drive. During World War II, welding in ship construction supplanted the use of rivets.
The keel of the first nuclear-powered passenger-cargo ship, the Savannah, was laid in
Camden, N.J., on May 22, 1958, and the ship was launched in 1960. In 1962 it was chartered to a
private company for experimental commercial use, but it did not prove financially successful.
NATURE OF THE SHIPPING INDUSTRY
Shipping is a private, highly competitive service industry. The activity of the industry is
divided into several categories, namely, liner service, tramp shipping, industrial service, and
tanker operation, all of which operate on certain well-established routes.
6
Trade Routes.
Most of the world's shipping travels a relatively small number of major ocean routes: the
North Atlantic, between Europe and eastern North America; the Mediterranean-Asian route via the
Suez Canal; the Panama Canal route connecting Europe and the eastern American coasts with
the western American coasts and Asia; the South African route linking Europe and America with
Africa; the South American route from Europe and North America to South America; the North
Pacific route linking western America with Japan and China; and the South Pacific route from
western America to Australia, New Zealand, Indonesia, and southern Asia. The old Cape of Good
Hope route pioneered by Vasco da Gama and shortened by the Suez Canal has returned to use
for giant oil tankers plying between the Persian Gulf and Europe and America. Many shorter
routes, including coastal routes, are heavily traveled.
Coastwise Shipping.
Technically, coastal shipping is conducted within 32 km (within 20 mi) of the shoreline, but
in practice ship lanes often extend beyond that distance, for reasons of economy and safety of
operation. In the U.S., coastal shipping is conducted along the Pacific, Atlantic, and Gulf coasts.
Under the restriction known as cabotage, the U.S. and many other nations permit only vessels
registered under the national flag to engage in coastal trade. Among many small European
countries cabotage does not apply, and short international voyages are common. A special feature
of coastal shipping in the U.S. is the trade between the Pacific coast and the Atlantic and Gulf
coasts. Vessels engaged in this trade traverse the open sea and utilize the Panama Canal;
however, they are covered by cabotage laws. In coastal and short-distance shipping, special-
purpose ships are often employed, such as car ferries and train ferries.
Inland Waterways.
A major part of all the world's shipping moves on inland waterways—rivers, canals, and
lakes. Usually such shipping employs smaller, lighter vessels, although in some cases oceangoing
ships navigate inland waterways, for example, the Saint Lawrence Seaway route to the Great
Lakes of North America. Containerization, lighter-aboard-ship, and barge-aboard-ship operations
7
have facilitated the shipping of cargoes between oceangoing vessels and those of the inland
waterways.
Liner Service.
Liner service consists of regularly scheduled shipping operations on fixed routes. Cargoes
are accepted under a bill-of-lading contract issued by the ship operator to the shipper.
Competition in liner service is regulated generally by agreements, known as conferences,
among the shipowners. These conferences stabilize conditions of competition and set passenger
fares or freight rates for all members of the conferences. In the U.S., steamship conferences are
supervised by the Federal Maritime Commission in accordance with the Shipping Act of 1916.
Rate changes, modifications of agreements, and other joint activities must be approved by the
commission before they are effective. Measures designed to eliminate or prevent competition are
prohibited by law.
Tramp Shipping.
Tramps, known also as general-service ships, maintain neither regular routes nor regular
service. Usually tramps carry shipload lots of the same commodity for a single shipper. Such
cargoes generally consist of bulk raw or low-value material, such as grain, ore, or coal, for which
inexpensive transportation is required. About 30 percent of U.S. foreign commerce is carried in
tramps.
Tramps are classified on the basis of employment rather than of ship design. The typical tramp
operates under a charter party, that is, a contract for the use of the vessel.
The center of the chartering business is the Baltic Exchange in London, where brokers
representing shippers meet with shipowners or their representatives to arrange the agreements.
Freight rates fluctuate according to supply and demand: When cargoes are fewer than ships, rates
are low. Charter rates are also affected by various other circumstances, such as crop failures and
political crises.
Charter parties are of three kinds, namely, the voyage charter, the time charter, and the
bareboat charter. The voyage charter, the most common of the three, provides transport for a
single voyage, and designated cargo between two ports in consideration of an agreed fee. The
8
charterer provides all loading and discharging berths and port agents to handle the ship, and the
shipowner is responsible for providing the crew, operating the ship, and assuming all costs in
connection with the voyage, unless an agreement is made to the contrary. The time charter
provides for lease of the ship and crew for an agreed period of time. The time charter does not
specify the cargo to be carried but places the ship at the disposal of the charterer, who must
assume the cost of fuel and port fees. The bareboat charter provides for the lease of the ship to a
charterer who has the operating organization for complete management of the ship. The bareboat
charter transfers the ship, in all but legal title, to the charterer, who provides the crew and
becomes responsible for all aspects of its operation.
The leading tramp-owning and tramp-operating nations of the world are Norway, Great
Britain, the Netherlands, and Greece. The carrying capacity of a typical, modern, well -designed
tramp ship is about 12,000 dwt, and its speed is about 15 knots. The recent trend is toward tramps
of 30,000 dwt, without much increase in speed.
Industrial Carriers.
Industrial carriers are vessels operated by large corporations to provide transportation
essential to the processes of manufacture and distribution. These vessels are run to ports and on
schedules determined by the specific needs of the owners. The ships may belong to the
corporations or may be chartered. For example, the Bethlehem Steel Corp. maintains a fleet of
Great Lakes ore carriers, a number of specialized ships that haul ore from South America to
Baltimore, Md., and a fleet of dry-cargo ships that transports steel products from Baltimore to the
Pacific coast. Many oil companies maintain large fleets of deep-sea tankers, towboats, and river
barges to carry petroleum to and from refineries.
Tanker Operation.
All tankers are private or contract carriers. In the 1970s some 34 percent of the world
tanker fleet, which aggregates about 200 million dwt, was owned by oil companies; the remaining
tonnage belonged to independent shipowners who chartered their vessels to the oil companies.
So-called supertankers, which exceed 100,000 dwt, are employed to transport crude petroleum
9
from the oil fields to refineries. The refined products, such as gasoline, kerosene, and lubricating
oils, are distributed by smaller tankers, generally less than 30,000 dwt, and by barges.
10
CHARTERING
11
Chartering (Shipping)
In some cases a charterer may own cargo and employs a shipbroker to find a
ship to deliver the cargo for a certain freight rate. Freight rates may be on a per-ton basis over a
certain route (e.g. for iron ore between Brazil and China) or alternatively may be expressed in
terms of a total sum - normally in U.S. dollars - per day for the agreed duration of the charter.
A charterer may also be a party without their own cargoes who takes a vessel on charter
for a specified period from the owner and then trades the ship to carry cargoes at a profit to the
hire rate, or even makes a profit in a rising market by re-letting the ship out to other charterers.
Depending on the type of ship and the type of charter, normally a standard contract form called a
charter party is used to record the exact rate, duration and terms agreed between the shipowner
and the charterer.
Chartering types as follows.
1. Time charterer
2. Voyage charterer
3. Period charterer
4. Bareboat charterer
1. Time chartering:
It is hiring of a vessel for a specific amount of time; the owner still manages
the vessel, but the charterer selects the ports and directs the vessel where to go. The Charterer
pays for all fuel the vessel consumes, port charges and a daily 'hire' to the owner of the vessel.
2. Voyage charterer
It is the charter or hiring of a vessel and crew for a voyage between a load port
and a discharge port. The Charterer pays the vessel owner on a per-ton or lump-sum basis. The
vessel owner pays the port costs (excluding stevedoring), fuel costs and crew costs.
3. Period charterer
12
4. Bare Boat chartering
It is an arrangement for the hiring of a vessel, whereby no administration or
technical maintenance are included as part of the agreement. The Charterer pays for all operating
expenses, including fuel, crew, port expenses and hull insurance. Usually, the Charter period
(normally years) ends with the Charterer obtaining title (ownership) in the hull. Effectively, the
Owners are financing the purchase of the vessel.
5. Demise Chartering
It Demise charter shifts the control and possession of the vessel; the charterer
takes full control of the vessel along with the legal and financial responsibility for it.
VESSEL TYPES
Merchant ships are classified as passenger carriers, cargo ships, and tankers. During the
height of passenger travel by ship, the largest as well as the most glamorous ships afloat were the
famed liners of the North Atlantic, which, beginning in the mid-19th century, sailed regular
schedules between the Americas and Europe. Competing in speed as well as in size and
appointments, such ships as the Cunard's Mauretania 2 (1939–65), Queen Mary (1936; a hotel
and tourist attraction since 1967, docked in Long Beach, Calif.), and Queen Elizabeth (1938–68),
as well as the United States, (built in the U.S. in 1940s and used as a military vessel and a luxury
liner, moored in Philadelphia since 1996) and the French Line passenger ship, the France (1960,
sold and renamed Norway in 1979, retired in the 2000s), gradually reduced the time for the North
Atlantic crossing to less than four days. Their size, from about 45,000 to 75,000 metric tons and
up to 305 m (1000 ft) in length, was gigantic by the standards of the first half of the 20th century,
but they have been dwarfed by the oil tankers of the 1970s and '80s. Today's passenger liners
operate principally in the cruise trade.
At the beginning of the 21st century there was revived interest in ocean travel. Setting a
new standard for size, weight, and elegance, the Cunard's newest flagship, the Queen Mary 2, is
the largest (151,400 tons), longest (345 m/1132 ft), tallest (72 m/236 ft), widest (41 m/135 ft), and
13
most costly ($800 million) liner ever built. It set out on her first voyage in 2004, with a planned
schedule of 12 trans-Atlantic crossings in 2004 and 26 crossings in 2005; the latter number is
double the number of crossings made by her sister ship, the Queen Elizabeth 2 (1968, retired in
2004).
Cargo Ships.
Cargo ships carry packaged goods, unitized cargo (cargo in which a number of items are
consolidated into one large shipping unit for easier handling), and limited amounts of grain, ore,
and liquids such as latex and edible oils. A few passengers are accepted on some cargo liners.
Specialized ships are designed and built to carry certain types of cargo, for example, automobiles
or grain.
Container Ships.
In the late 1950s container ships set the pattern for technological change in cargo
handling and linked the trucking industry to deep-sea shipping. These highly specialized ships
carry large truck bodies and can discharge and load in one day, in contrast to the ten days
required by conventional ships of the same size. The rapid development of the container ship
began in 1956, when Sea-Land Service commenced operations between New York City and
Houston, Tex. Barge-aboard, or lighter-aboard, ships, also called seabees (sea barges) or LASH
(lighter-aboard ships), resulted from an evolutionary development of the containership. They are
capable of carrying about 38 barges, or up to 1600 containers, or a combination of containers and
barges. Their design enables them to deliver cargo to developed or undeveloped ports, without
the need for berthing.
Tankers.
Tankers, designed specifically to carry liquid cargoes, usually petroleum, have grown to
many-compartmented giants of a million metric tons and more. Despite their great size, their
construction is simple, as is, for the most part, their operation. A major problem with the giant
tankers is the severe environmental damage of oil spills, resulting from collision, storm damage, or
leakage from other causes.
14
Specialized tankers transport liquefied natural gas (LNG), liquid chemicals, wine, molasses, and
refrigerated products.
Treaties and Conventions.
Many treaties and conventions have been adopted over the years with the objective of
increasing the safety of life at sea. One of the most important agreements provided for the
establishment of the International Iceberg Patrol in 1913, after the Titanic disaster. Under the
International Load-Line Convention of 1930, ship loading was regulated on the basis of size,
cargo, and route of the vessel. The International Convention for the Safety of Life at Sea, which
governs ship construction, was ratified by most maritime nations in 1936, and updated in 1948,
and again in 1960 and 1974.
15
DRY BULK CARRIERS
16
Dry Bulk Carriers (Cargo Ship)
Here are a few notes on the characteristics of a typical cargo ship of just after 1945, and
things have probably not changed greatly. The terms are often very confusing if you are not
familiar with them, so I have explained them as best I can. There are some variations, but I have
chosen what appears to be the most common practice. The technical information is taken from
Kent's handbook.
The knot is a unit of speed, one nautical mile (6080.22 ft) per hour. Multiply speed in knots
by 1.15 to get speed in mph. The nautical mile is one minute of arc on a great circle of the earth,
assumed to be a sphere of radius 6371 km. It is an annoyance that also appears in wind velocities
from official sources, but it does make it easy to find the distances along great circles, which is
why it was originally defined.
Sea water weighs about 64 pcf, or 1026 kg/m3. Buoyancy is discussed in Hydrostatics. The action
of propellers, though mainly for air, is treated in Fans.
The sketch at the right shows the principal dimensions of a cargo ship. The length can be
the length overall (LOA) or the length between perpendiculars (LBP) at the water line. The depth
is measured from the keel to the upper continuous deck. The draft is measured from the keel to
the water line of the loaded ship. The beam is the width of the ship. The front of the ship is the
bows, the rear the stern. The starboard side is the right side, facing the front of the ship, while the
port side is the left. Our example ship, the AP2 (or VC2) Victory ship, has a LOA of 455 ft, a LBP
of 436.5 ft, a beam of 62 ft, a
depth of 38 ft, and a draft of 28.5
ft.
The tonnage of a ship
is not a weight, but a volume. One ton is 100 cubic feet. The total internal volume of a ship is its
gross tonnage, and if we subtract all the volume not used for cargo, we get the net tonnage. The
AP2 had gross tonnage 7850, net tonnage 4850. This means that the cargo occupied 485,000
cubic feet and fuel, engine, crew quarters, etc. occupied 300,000 cubic feet. From the ship's
17
dimensions, we find that LBP x beam x depth = 1,028,000 cubic feet, which, of course, is
somewhat greater than the gross tonnage, but is consistent with it.
Formulas were created to estimate the tonnage of a ship from its dimensions. For wooden
ships, Builder's Old Measure was instituted in 1773, in which tonnage = (L - 0.6W)W2/188. Applied
to the AP2, this formula gives 8540 tons, somewhat less than the actual tonnage, indicating that
the modern steel ship is less "blocky" than the wooden cargo ship. Of course, formulas applying to
the newer ships have also been developed. The tonnage of a ship was used for assessing port
dues and other charges.
The total weight of the ship and everything in it is the displacement, measured in long tons of
2240 lb. A long ton is only a little larger than a metric ton of 1000 kg, but is considerably larger
than the U.S. short ton of 2000 lb. The displacement of the AP2 is 15,200 tons. This weight
displaces 532,000 cubic feet of sea water weighing 64 pcf, and loads the ship down to the normal
water line. The deadweight is the difference in displacement when the ship is completely
unloaded, of cargo, fuel, crew and so forth. The cargo deadweight is the weight of the cargo
alone. For the AP2, the deadweight is 10,800 tons. Therefore, the weight of the ship alone is
15,200 minus 10,800 tons, or 4400 tons. The reference does not give the cargo deadweight of the
AP2, but if it is in the same proportion to the deadweight as the net tonnage is to the gross
tonnage, it would be 6673 tons. Most of the difference would probably be fuel.
The Victory ships, of which the AP2 is an example, were a little larger than the Liberty
ships that preceded them, but much less Spartan. The first, SS United Victory, was launched 28
February 1944, and there were 534 in all. Like the Liberty ships, they were all-welded. Instead of
the 2000 hp triple-expansion reciprocating engine of the Liberty ships, they had a 6000 hp (or
8500 hp) cross-compound steam turbine geared to the propeller axis. This raised the speed from
11 knots to 15.5 knots, lessening the danger from submarine attack. They were armed with a 5"
stern gun, a 3" bow gun, and 8 20mm machine guns. The fuel in both cases seems to have been
Bunker C fuel oil. The relation between horsepower, speed and displacement is given
approximately by the Admiralty Coefficient C = (displacement)2/3(speed)3/hp, where displacement
is in tons and speed in knots. For a typical cargo ship of the period, C was about 400. For the
18
AP2, it was 427, using the slightly different figures 14,800 tons and 16.2 knots. The displacement
and the speed could differ under different coditions of loading, so the figures are not always
consistent.
The AP2 had a single propeller of 18.25 ft. diameter and 4 blades, rotating at 100 rpm.
The good-practice diameter of a propeller in feet is given by d = 50(hp/rpm3)1/5, and this propeller
agrees with the formula. The pitch of the propeller was 17.5 ft. The power plant was amidships,
with a long shaft to the propeller in the stern.
This ship carried approximately as much as a heavy U.S. railway freight train (7000 tons), using
about the same horsepower, but the freight train will move at twice the speed of the ship on the
level, or more, up to about 48 knots. The train will require a crew of three at the present time, or
nine considering 24-hour operation, while the Victory ship had a crew of 54. There are no tracks in
the sea, or water on land, but the comparison is interesting. Ships today seem to carry most of
their cargo in containers on deck, which must affect their stability; it would be nice to know how
this is managed. A cargo ship generally proceeds at a constant full speed, about 80% of the full
horsepower available, when at sea, and is most efficient at this speed.
Charterer Party
Charter-parties are, as we have already explained, either for a
voyage or for a period of time. (1) A charter-party for a voyage is a formal agreement made
between the owner of the vessel and the charterers by which it is agreed that the vessel being
tight, staunch and strong, and every way fitted for the voyage, shall load at a certain named place
a full cargo either of goods of a specified description or of general merchandise, and being so
loaded shall proceed with all possible despatch either to a specified place or to a place to be
named at a specified port of call, and there deliver the cargo to the charterers or their assigns.
There are clauses which provide for the amount of freight to be paid and the manner and time of
payment; for the time, usually described as lay days, to be allowed for loading and discharging,
and for the demurrage to be paid if the vessel is detained beyond the lay days; usually also a
19
clause requiring the cargo to be brought to and taken from alongside at merchant's risk and
expense; a clause that the master shall sign bills of lading for the cargo shipped either at the same
rate of freight as is payable under the charter-party or very commonly at any rate of freight (but in
this case with a stipulation that, if the total bill of lading freight is less than the total freight payable
under the charter-party, the difference is to be paid by the charterers to the master before the
sailing of the vessel); and there is usually what is called the cesser clause, by which the charterer's
liability under the charter-party is to cease on shipment of the cargo, the shipowner taking a lien on
the cargo for freight, dead freight and demurrage. The charter-party is made subject to exceptions
similar to those which are found in bills of lading. There are also usually clauses providing for the
commissions to be paid to the brokers on signing the charter-party, the address commission to be
paid to the agents for the Vessel at the port of discharge, and other matters of detail. The c lauses
in charter-parties vary, of course, indefinitely, but the above is probably a sufficient outline of the
ordinary form of a charter-party for a voyage.
What has been said with regard to bills of lading as to the voyage, the place of delivery,
the exceptions and excepted perils, and the liability of the shipowner and his lien applies equally
to charter-parties. It may be desirable to add a few words on demurrage, dead Freight, and on the
cesser clause.
Demurrage is, properly speaking, a fixed sum per day or per hour agreed to be paid by the
charterer for any time during which the vessel is detained in loading or discharging over and
above the time allowed, which is, as we have said, usually described as the lay days. Sometimes
the number of days during which the vessel may be kept on demurrage at the agreed rate is fixed
by the charter-party. If no demurrage is provided for by the charter-party, and the vessel is not
loading or discharging beyond the lay days, the shipowner is entitled to claim damages in respect
of the loss which he has suffered by the detention of his ship; or, if the vessel is detained beyond
the fixed number of demurrage days, damages for detention will be recoverable. Sometimes there
is no time fixed by the charter-party for loading or discharging. The obligation in such cases is to
load or discharge with all despatch that is possible and reasonable in the circumstances; and if
the loading or discharging is not done with such reasonable despatch, the shipowner will be
20
entitled to claim damages for detention of his ship. The rate of demurrage (if any) will generally be
accepted as the measure of the damages for detention, but is not necessarily the true measure.
When the claim is for detention and not demurrage the actual loss is recoverable, which may be
more or may be less than the agreed rate of demurrage. The contract usually provides that
Sundays and holidays shall be excepted in counting the lay days, but unless expressly stipulated
this exception does not apply to the computation of the period of detention after the lay days have
expired.
Dead freight is the name given to the amount of freight lost, and therefore recoverable by
the shipowner from the charterer as damages if a full and complete cargo is not loaded in
accordance with the terms of the charter-party.
The cesser clause has come into common use because very frequently the charterers are
not personally interested in the cargo shipped. They may be agents merely, or they may have
chartered the vessel as a speculation to make a profit upon the bill of lading freight. The effect of
the clause is that when the charterers have shipped a full cargo they have fulfilled all their
obligations, the shipowner discharging them from all further liability and taking instead a lien on
the cargo for payment of all freight, demurrage or dead freight that may be payable to him. It has
become an established rule for the construction of the cesser clause that, if the language used will
permit it, the cesser of liability is assumed to be co-extensive only with the lien given to the
shipowner; or, in other words, the charterers are released from those liabilities only for which a
lien is given to the shipowner. The shipowner is further secured by the stipulation already referred
to, that if the total freight payable under the bills of lading is less than the full chartered freight the
difference shall be paid to the shipowner before the vessel sails. A difficulty which sometimes
arises, notwithstanding these precautions, is that although an ample lien is given by the charter-
party, the terms of the bills of lading may be insufficient to preserve the same extensive lien as
against the holder of the bills of lading. The shippers under the bills of lading, if they are not the
charterers, are not liable for the chartered freight, but only for the bill of lading freight; and unless
the bill of lading expressly reserves it, they are not subject to a lien for the chartered freight. The
master may guard against this difficulty by refusing to sign bills of lading which do not preserve
21
the shipowner's lien for his full chartered freight. But he is often put into a difficulty by a somewhat
improvident clause in the charter-party requiring him to sign bills of lading as presented. See
Kruger v. Moel Tryvan, 1907 A. C. 272.
(2) A time charter-party is a contract between the shipowner and charterers, by which the
shipowner agrees to let and the charterers to hire the vessel for a specified term for employment,
either generally in any lawful trade or upon voyages within certain limits. A place is usually named
at which the vessel is to be re-delivered to the owners at the end of the term, and the freight is
payable until such re-delivery; the owner almost always pays the wages of the master and crew,
and the charterers provide coals and pay port charges; the freight is usually fixed at a certain rate
per gross register ton per month, and made payable monthly in advance, and provision is made
for suspension of hire in certain cases if the vessel is disabled; the master, though he usually is
and remains the servant of the owner, is required to obey the orders of the charterers as regards
the employment of the vessel, they agreeing to indemnify the owners from all liability to which they
may be exposed by the master signing bills of lading or otherwise complying with the orders of the
charterers; and the contract is made subject to exceptions similar to those in bills of lading and
voyage charter-parties. This is the general outline of the ordinary form of a time charter-party, but
the forms and their clauses vary, of course, very much, according to the circumstances of each
case.
It is apparent that under a time charter-party the shipowner to a large extent parts with the
control of his ship, which is employed within certain limits according to the wish and directions,
and for the purposes and profit of, the charterers. But, as we have already explained at the
beginning of this article, the shipowner continues in possession of his vessel by his servant the
master, who remains responsible to his owner for the safety and proper navigation of the ship.
The result of this, as has been already pointed out, is that the holder of a bill of lading signed by
the master, if he has taken the bill of lading without knowledge of the terms of the time charter-
party, may hold the owner responsible for the due performance of the contract signed by the
master in the ordinary course of his duties, and within his ostensible authority as servant of the
shipowner, although in fact in signing the bill of lading the master was acting as agent for and at
22
the direction of the time charterer, and not the shipowner. In the language of the ordinary time
charter-party the ship is let to the charterers; but there is no true demise, because, as we have
pointed out, the vessel remains in the possession of the ship-owner, the charterer enjoying the
advantages and control of its employment. Where the possession of a ship is given up to a hirer,
who appoints his own master and crew, different considerations apply; but though the instrument
by which the ship is let may be called a charter-party, it is not truly a contract of affreightment.
23
IMPLEMENTING HEDGING TECHNIQUE
ON VESSEL BUNKERING
24
Contract of Affreightment (COA):
It is the expression usually employed to describe the contract between a ship-owner and
another person called the charterer, by which the ship-owner agrees to carry goods of the
charterer in his ship, or to give to the charterer the use of the whole or part of the cargo-carrying
space of the ship for the carriage of his goods on a specified voyage or voyages or for a specified
time. The charterer on his part agrees to pay a specified price, called freight, for the carriage of
the goods or the use of the ship.
A ship may be let like a house to a person who takes possession and control of it for a
specified term. The person who hires a ship in this way occupies during the specified time the
position of ship-owner. The contract by which a ship is so let may be called a charter-party; but it
is not, properly speaking, a contract of affreightment, and is mentioned here only because it is
necessary to remember the distinction between a charter-party of this kind, which is sometimes
called a demise of the ship, and a charter-party which is a form of contract of affreightment.
As the first paragraph explains it is nothing but a contract with the charterer to lift a
specific cargo i.e. to load and to discharge to the receiver. In this kind of shipment the vessel will
be declared when the shipment is done. The freight is fixed for the entire contract of the shipment.
For example we can see a contract of affreightment.
Cargo has been taken on contract for moving it from west cost India to Persian Gulf.
Several aspects are fixed on the charterer party and the contract of quantity to move per shipment
is also fixed. Please find below the table of a contract.
25
From the column you can clearly understand that cargo to be moved totally of 110,000mt
of cargo. Where a contract has been fixed that these many shipments will be made by our
company with fixing the freight rate per mt.
When performing this kind of COA there are several aspects to be considered by the
company as a ship owner to reduce the cost and gain more profit out of the shipment. We are
going to take a major part of expense of owners on the shipment. Bunkering where the vessel is
going to be bunkered for the entire shipment from west cost India to Persian Gulf.
We are implementing a market technique for the bunker arrangement for the vessel. We
shall discuss about the Hedging technique.
Implementing Hedging Technique:
Making an investment to reduce the risk of adverse price movements in an asset. Normally,
a hedge consists of taking an offsetting position in a related security, such as a futures contract.
Investors use this strategy when they are unsure of what the market will do. A perfect hedge
reduces your risk to nothing (except for the cost of the hedge).
Voyage no vessel Preliminary Lay Tentative Lays lays Tonnage Target laod
Days 15 days Days 6 days MT Date
1 TBN 13-Jun-06 26-Jun-06 17-Jun-06 22-Jun-06 18000 20-Jun-08
2 TBN 13-Jul-06 26-Jul-06 17-Jul-06 22-Jul-06 15000 20-Jul-08
3 TBN 19-Aug-06 01-Sep-06 23-Aug-06 28-Aug-06 15000 26-Aug-08
4 TBN 13-Sep-06 01-Sep-06 17-Sep-06 22-Sep-06 15000 20-Sep-08
5 TBN 23-Oct-06 05-Nov-06 27-Oct-06 01-Nov-06 15000 30-Oct-08
6 TBN 22-Nov-06 05-Dec-06 26-Nov-06 01-Dec-06 15000 29-Nov-08
7 TBN 23-Dec-06 05-Jan-06 27-Dec-06 01-Jan-06 17000 30-Dec-08
26
Hedging is done is the bunkering of the vessel’s. Please find below the maritime fuel used
in the vessel.
In the maritime field another type of classification is used for fuel oils:
MGO (Marine gasoil) - roughly equivalent to No. 2 fuel oil, made from distillate only
MDO (Marine diesel oil) - A blend of gasoil and heavy fuel oil
IFO (Intermediate fuel oil) A blend of gasoil and heavy fuel oil, with less gasoil than
marine diesel oil
MFO (Medium fuel oil) - A blend of gasoil and heavy fuel oil, with less gasoil than
intermediate fuel oil
HFO (Heavy fuel oil) - Pure or nearly pure residual oil, roughly equivalent to No. 6 fuel
oil
Marine diesel oil contains some heavy fuel oil, unlike regular diesels. Also, marine fuel oils
sometimes contain waste products such as used motor oil.
How are futures used to hedge a position for bunkering the vessel?
Futures contracts are one of the most common derivatives used to hedge risk. A futures
contract is as an arrangement between two parties to buy or sell an asset at a particular time in the
future for a particular price. The main reason that companies or corporations use future contracts
is to offset their risk exposures and limit themselves from any fluctuations in price. The ultimate
goal of an investor using futures contracts to hedge is to perfectly offset their risk. In real life,
however, this is often impossible and, therefore, individuals attempt to neutralize risk as much as
possible instead. For example, if a commodity to be hedged is not available as a futures contract,
an investor will buy a futures contract in something that closely follows the movements of that
commodity.
27
When a company knows that it will be making a purchase in the future for a particular
item, it should take a long position in a futures contract to hedge its position. For example,
suppose that Company X knows that in seven months it will have to buy 6,000 mt of IFO and
2,500mt MGO to fulfill an order. Assume the spot price for Bunker is 500 USD IFO/MT and 900
USD MGO/MT. By buying the futures contract, Company X can lock in a price of Bunker is 500
USD IFO/MT and 900 USD MGO/MT. This reduces the company's risk because it will be able close
its futures position and buy 6,000mt of IFO and 2,500mt MGO in seven months.
If a company knows that the vessel will be consuming 6,000mt IFO and 2,500mt MGO, it
should take a short position in a futures contract to hedge its position. For example, assume
the spot price for bunker is 650 USD IFO/MT and 1200 USD MGO/MT and the futures price is 500
USD IFO and 900 USD MGO. Company X would short futures contracts on bunker and close out
the futures position in seven months. In this case, the company has reduced its risk by ensuring
that it will receive 500 USD IFO/MT and 900 USD MGO/MT it buys. At the end of each contract the
difference in the physical supplied amount and the future contract amount will be settled by the
trader.
Futures contracts can be very useful in limiting the risk exposure that an investor has in a
trade. The main advantage of participating in a futures contract is that it removes the uncertainty
about the future price of an item. By locking in a price for which you are able to buy or sell a
particular item, companies are able to eliminate the ambiguity having to do with expected expenses
and profits.
28
CONCLUSION
29
Conclusion
From the before chapter we have seen a brief of the hedging technique implemented on
the bunker against a COA for the cargo shipment. In this part we are going to see the profit gained
by implementing the technique. As clearly explained that it is a risk management system and
limited amount of product is hedged. We can see the below a week market price of the bunker and
the graph.
Price (USD/mt) Date IFO MGO
12/07/2006 572 1206 13/07/2006 649.5 1285 14/07/2006 637.5 1258.5 15/07/2006 636 1263 16/07/2006 650 1246.5 17/07/2006 679 1296.5 18/07/2006 702 985
BUNKER PRICES
0
200
400
600
800
1000
1200
1400
12/07
/2006
13/07
/2006
14/07
/2006
15/07
/2006
16/07
/2006
17/07
/2006
18/07
/2006
Date
Pric
e IFOMGO
30
From the graph we could understand that the bunker prices are varying daily. Now for the COA shipment
we have hedged for a limit of 6,000mt IFO and 2,500mt of MGO. We will be bunkering the vessel on the physical
market rate and the price difference of the future price hedged 500 USD IFO/MT and 900 USD MGO/MT.
The physically supplied market price is more than the future price hedged. We will be getting the
difference of amount from the trader. By this move of the market, as owners we gain a lot on the vessel bunkering.
At the same time when the bunker price falls down , which will intern be a big loss to owners. As we started this
chapter by explaining it is a technique of risk management.