bus bar tubing[1]
TRANSCRIPT
-
7/27/2019 Bus Bar Tubing[1]
1/2
Reduces bus bar clearance
requirements
Protects against accidental flashover
Continuous operatingo o
temperature: -40 C to 125 C
Meets the requirements ofESI 09 13
Halogen free
oShrink Temperature : 120 C
Track Resistant
Suitable for medium voltage
switchgear applications up to36 kV
High dielectric strength
Good Weather/ UV
M-Seal Bus Bar Tubings are made of specially formulated, irradiation cross-linked,
flame-retardant, track-resistant polyolefins which will shrink to fit rectangular,
square or round bus bars. These tubing's are especially designed for insulating
medium voltage bus bars (till 36kV). We have developed M-seal Bus Bar Insulation
tubings with only one word in mind: SAFETY. These are highly recommended for
covering exposed bus bars in pillar, boxes, electrical switch gears, cabinets and bus
ducts. This greatly reduces the risk of accidental electrocution of personnel
working on or near live bus bars.
The tubes are highly flexible, enabling them to be easily installed on curves and
bends without fear of cracking. They are available in different sizes to cover the
entire range of copper and aluminum bus bars. They are available in wide range of
expansion ratios so each size of tubing fits over a wide range of bus bars. The
tubings are ideal for original equipment assembly and for retrofit applications
where access to only one end is available. The M-Seal bus bar heat-shrinkable
tubes are also ideal for installation on overhead lines to protect against accidental
bridging caused by birds and animals.
Bus Bar Tubing
-
7/27/2019 Bus Bar Tubing[1]
2/2
Fully Shrunk
di wi
Expanded
Di
Dimensions Chart
Said Size
MAT 30/10
MAT 35/12
MAT 40/16
MAT 42/19 mw
MAT 42/19 tw
MAT 60/29
MAT 76/38
MAT 100/49
MAT 130/50
Internal diameter
as recovered
10
11
16
17
17
27
36
49
49
di
Recovered
Wall thickness
2.5
3
4
3.5
4.5
3.5
3.5
3.8
4
wi
Diameter as
supplied
32
37
42
44
44
62
78
102
134
Di
Technical Specifications
Properties
Density
Longitudinal Change
Tensile strength
Ultimate Elongation
Shrink Temperature
Continuous Operating
Temperature0
Heat Shock, 4 Hrs @ 225 C
Properties after Thermal Aging0
168 hrs @ 150 C
Tensile strength
Ultimate Elongation
Corrosion Resistance
Low Temperature Flexibility
Flammability
Fungus Resistance
Di-electric strength
Relative Permittivity
Volume ResistivityTracking Resistance
Water Absorption
Unit
gm/cc
%2
N/mm
%0C
0C
2N/mm
%
kV/mm
ohm.cm
%
Testing Methods
ASTM D 792
ESI 09-13
ASTM D 638
ASTM D 638
ASTM D 2671
ASTM D 2671
ASTM D 638
ASTM D 638
ASTM D 2671
ESI 09-13
UL 94HB
ASTM D 2671
ASTM D 149
ASTM D 150
ASTM D 257ASTM D 2303
ASTM D 570
Typical Value
1.22