busbar systems and accessories - ec electrical &...

Busbar systems and accessories

Above prices do not include VAT. E&OE

new

202

03599

D

Vertical bars

TOP compact adjustable busbar support - up to 4500A (IEC 60439-1)

• universal fixing support • adjustable distance between phases• high short-circuit strength (see page 221 for ratings)• non magnetic aluminium prepunched profile (AL EN AW-6060 Alloy)• easy to install - cost effective• for bars 30-120mm wide / 5 or 10mm thick• type tested according to IEC 60439-1 certification: ACAE LOVAG (65/75/100kA eff 1 sec) for busbar no. type thickness bars description price

Three pole (supplied with insulated supports and all screws, nuts, washers)

TOP1005 5mm 1-2 TOP2/5T busbar support kit 179.00TOP1025 10mm 1 TOP1/10T busbar support kit 179.00TOP1035 10mm 1-2 TOP2/10T busbar support kit 225.00TOP1045 10mm 1-3 TOP3/10T busbar support kit 266.00

Four pole (3Ph+N) supplied with insulated supports and all screws, nuts, washers)

TOP1010 5mm 1-2 TOP2/5TN busbar support kit 232.00TOP1040 10mm 1-2 TOP2/10T N busbar support kit 286.00TOP1050 10mm 1-3 TOP3/10T N busbar support kit 370.00

TOP1000 perforated aluminium profile(12.5mm pitch) (2 metre length) 246.00

Accessories

TOP1100 horizontal busbar supports mounting brackets 67.00TOP1105 vertical busbar supports mounting brackets 52.00TOP1055 rislan tube (for insulating threaded rods) only req for minimum distance 9.90

Busbar clamps (zinc, passivated steel 5mm thick)

• permits tap-off of flexible and solid bars, from main bar (without drilling)

max. bar flexi bar type width width description price

Rectangular

SBR1000 50mm 20/24mm busbar tap-off clamps 100.70SBR1005 50mm 32mm busbar tap-off clamps 101.40SBR1010 50mm 40mm busbar tap-off clamps 102.50SBR1020 80mm 32mm busbar tap-off clamps 110.00SBR1025 80mm 50mm busbar tap-off clamps 113.00

Square

SBQ1000 30mm 30mm busbar tap-off clamps 111.00SBQ1005 40mm 40mm busbar tap-off clamps 116.00SBQ1015 63mm 63mm busbar tap-off clamps 149.00SBQ1020 80mm 80mm busbar tap-off clamps 199.00SBQ1025 100mm 100mm busbar tap-off clamps 218.00

Insulated busbar supports 250 - 400A (multi-pole)

• glass fibre reinforced, self extinguishing to UL94VO• working temperature: -40ºC ~ 130ºC, glow wire test: 960ºC• M6 screws included to fasten bars• for threaded busbars (see page below)

PSP250 250A 4 pole insulated support (for 15/20x5 threaded bar) ea 130.00

PSP400 400A 4 pole insulated support (for 20/30x5 threaded bar) pair 420.00PSP400

SBR...

TOP...



new

203

01231

01537

01563

01495

01356

01601

Horizontal bars

Busbar Supports (for horizontal mounting of bars 15/20/25/30mm wide) for busbar size (mm) no.type wide thick poles description amps price

01601 15-30mm 5/10mm 1 universal busbar support 630A 69.4001356 15-30mm 5/10mm 2 universal busbar support 630A 111.0001495 15-30mm 5/10mm 3 universal busbar support 630A 111.0001485 15-30mm 5/10mm 4 universal busbar support 630A 169.00

“H” profile busbar supports

01116* 30mm “H” profile 1 “H” profile busbar support 1600A 145.0001231 30mm “H” profile 3 “H” profile busbar support 1600A 392.00

* attaches to 01231 or can be mounted individually

End covers for busbar supports

01573 end cover for 3 busbar support 01495 (ea) 33.0001131 end cover for 4 set right and left 01485 (pr) 88.0001234 end cover for 3 “H” profile busbar support 01231 (ea) 40.00

Busbar termination (for direct clamping onto busbars - no drilling) 1 Phase • clip-on terminals for cable conductors

for busbar size (mm) cable size mm2type wide thick min max description amps

01284 15-30mm 5mm 1.5 - 16mm2 1P cable conductor terminal 180A 8.8001285 15-30mm 5mm 4 - 35mm2 1P cable conductor terminal 270A 12.8001287 15-30mm 5mm 16 - 70mm2 1P cable conductor terminal 400A 17.2001289 15-30mm 10mm 1.5 - 16mm2 1P cable conductor terminal 180A 14.0001290 15-30mm 10mm 4 - 35mm2 1P cable conductor terminal 270A 20.4001292 15-30mm 10mm 16 - 70mm2 1P cable conductor terminal 400A 23.6001203 15-30mm 10mm 16 - 120mm2 1P cable conductor terminal 440A 39.00 CRITO proficlip, brace terminals (for 5mm, 10mm and “H” profile bars)

01318 20-30mm 5/10/”H” 95 - 185mm2 1P cable conductor terminals 500A 130.0001760 20-30mm 5/10/”H” 120 - 300mm2 1P cable conductor terminals 600A 182.00

3 Phase clamp-on terminals (fully insulated, internally partitioned)

For bars 12/15/20/25/30mm x 5/10m or “H” profile

01563 12-30mm 5/10mm 1.5 - 16mm2 3P cable conductor terminal 80A 156.0001240 12-30mm 5/10/”H” 6 - 50mm2 3P cable conductor terminal 300A 242.0001243 12-30mm 5/10/”H” 35 - 120mm2 3P cable conductor terminal 440A 347.0001199 20-30mm 5/10/”H” 95 - 185mm2 3P cable conductor terminal 460A 540.0001537* 20-30mm 5/10/”H” 120 - 300mm2 3P cable conductor terminal 560A 675.00

* adjustable phase separation distance - supplied without cover

Conductor terminals for connecting solid or flexible bars directly to Busbar System 1 Phase

for busbar size terminal spacetype wide thick wide high description amps

01319 20-30mm 5/10/”H” 30 - 20mm 1P conductor terminal 750A 130.0001069 20-30mm 5/10/”H” 55 - 28mm 1P conductor terminal 1600A 581.0001070 20-30mm 5/10/”H” 68 - 28mm 1P conductor terminal 1600A 714.0001071 20-30mm 5/10/”H” 105 - 28mm 1P conductor terminal 1600A 1090.00

3 Phase Conductor terminals

01538 20-30mm 5/10/”H” 32 - 20mm 3P conductor terminal 800A 672.00



new

204

01554

0102501245

Eques easy connector (clamps and terminates directly onto busbar - no drilling)

Includes: DIN rail supports for circuit breakers, contactors, fuse holders conductorsfrom base are directly connected to busbars, for busbars 15/20/25/30mm wide

for busbar size terminal dimensionstype wide thick mm2 H x W amperage price 32431 15-30mm 5/10/”H” 4mm2 45 x 200 2 rails 25A 225.0032442 15-30mm 5/10/”H” 6mm2 54 x 200 2 rails 32A 263.0032455 15-30mm 5/10/”H” 10mm2 54 x 200 2 rails 63A 295.0032459 15-30mm 5/10/”H” 10mm2 81 x 200 2 rails 63A 398.00

Universal Busbar adaptor (to accomodate MCCB’s and switcgear)

• for commercially available switchgear M4 fixing screws

32214 20-30mm 5/10/”H” clamp term. 222 x 108 200A 554.0032168 20-30mm 5/10/”H” clamp term. 320 x 110 250A 608.0032004 20-30mm 5/10/”H” clamp term. 320 x 238 630A 1210.00

Busbar Mounted Fuse bases (clamp-on terminates on busbar)

10 x 38 Cylindrical Fuse Bases

31954 20-30mm 5/10/”H” spring term. 3pole fuse holder 32A 436.00

NH DIN (blade type fuse bases)

03656 20-30mm 5/10/”H” M8 screw size “00” fuse holder 160A 440.0003704 20-30mm 5/10/”H” M10 screw size “1” fuse holder 250A 1984.0003693 20-30mm 5/10/”H” M10 screw size “2” fuse holder 400A 2440.00

Accessories

79448 grip-lug protection cover for size “00” fuses (1 per fuse) (ea) 18.3079449 grip-lug protection cover for size “1-3” fuses (2 per fuse) (per pair) 24.30

Busbar Mounted 3 Pole Fuse Switch Disconnectors

10 x 38 Cylindrical Fuse Switch

31232 20-30mm 5/10/”H” clamp term. 3pole fuse switch 32A 1016.00

Busbar covers (for finger touch protection of bubars)

Single cover (clips directly onto busbar) 1meter length

01245 single busbar cover (1 meter) clips directly onto busbar 10x30 112.0001252 single busbar cover (1 meter) clips directly onto busbar “H” profile 187.00

Reserve section cover (used to cover 3 pole busbars-requires 2 x supports 01026)

01025 reserve section cover (1100mm) requires 01026 supports 296.00

01026 support for reserve section cover (01025) 15/20/25/30 x 5/10/”H” 45.00

System cover (can be used to make-up any sized cover for bars, terminals etc.)

• mounts directly onto busbars 15/20/25/30 x 5/10/”H” (88mm deep cover)

01554 front cover section (1100mm) requires 01136 supports 246.0001555 upper/lower section (1100mm) requires 01136 supports 159.0001136 holder set (left + right) for cover 15/20/25/30 x 5/10/”H” 128.00


Above prices do not include VAT. E&OE205

01479

33201 33203

Horizontal bars

01230

31110

31115

31118

100/185mm system technology 1250/1600A

• silicone-free, chlorine-free• self extinguishing to UL94VO• creepage resistance CTI 200• temperature stability 120ºC• up to 80kA fault level

for busbar size (mm) no.type wide thick poles description amperage price

100mm System (100mm distance between busbar centres)

01479 30/40/50/60 10 3 universal busbar support 1250A 284.00

01245 end cover for busbar support 3p 01749 140.00

185mm System (185mm distance between busbar centres)

01230 30 - 120 10/”H” profile 3 universal busbar support 1600A 340.00

33341 end cover for busbar support 3p 01230 337.00

Surface/rail mount fuse holders and fuse switch disconnectors

AMBUS easy switch cylindrical fuse holderHolder for cylindrical fuses with box terminals

• modular rail mounting, shock protection to DIN VDE 0660/IEC/EN 60947-3• silicone-free, chlorine-free• self extinguishing to UL94• Creepage resistance CTI 200

rated fuse width intype current poles size description 17.5mm price

31110 32A 1 10x38 cylindrical fuseholder 1 23.8031113 32A 3 10x38 cylindrical fuseholder 3 74.50

31115 50A 1 14x51 cylindrical fuseholder 1.5 172.5031118 50A 3 14x51 cylindrical fuseholder 4.5 517.00

31120 125A 1 22x58 cylindrical fuseholder 2 244.0031123 125A 3 22x58 cylindrical fuseholder 6 732.00

Quadron Volbreaker

NH fuseswitch disconnectors3 pole switching DIN VDE 0660-IEC/EN 60947-3

• shock protection with intergrated positive action closure and arc chambers• fuses with mechanical retention in disconnector lid• degree of protection IP30 (front)• silicone-free, chlorine-free• temperature stability (size 000,00) 120ºC (size1,2,3) 150ºC• self extinguishing to UL94

33217 125A 3 C00(000) DIN(blade)fuseswitch disconnector 691.0033222 160A 3 C00 DIN(blade)fuseswitch disconnector 450.0033201 250A 3 1 DIN(blade)fuseswitch disconnector 1561.0033202 400A 3 2 DIN(blade)fuseswitch disconnector 2200.0033203 630A 3 3 DIN(blade)fuseswitch disconnector 2792.0033204 1600A 3 4 DIN(blade)fuseswitch disconnector 14490.00

Quadron Volbreak NH bus-mounting, fuse switch disconnector

33216 20-30mm 5/10/”H” 50mm2 size “000” fuse switch 125A 691.0033198 20-30mm 5/10/”H” 70mm2 size “00” fuse switch 160A 762.0033601 20-30mm 5/10/”H” 120mm2 size “1” fuse switch 250A 2455.0033602 20-30mm 5/10/”H” 240mm2 size “2” fuse switch 400A 2990.0033603 20-30mm 5/10/”H” 2x185mm2 size “3” fuse switch 630A 4405.00

Busbar support systems (Multiphase)


new

Vertical bars

206

5025 5110

5024 6400

5020 2030

5026 0450

5028 0410

SBC ER - compact adjustable busbar support - IEC 60439-1 4000A

Universal multipolar (edgewise mounting) busbar support system

• easy to install - cost effective• adjustable distance between phases (5mm increments)• for bars 30 - 125mm wide x 5/10mm thick (one or two bars per phase)• up to 50kA rms Icc 110kA peak short circuit current• high dielectrical resistance• high mechanical strength• high short circuit strength (see page 222)

type for busbar no. bars insulation interphase description price thickness per phase voltage distance

5025 5110 10mm 1-2 1000V adjustable busbar support slots (ea) 42.005025 5105 5mm 1-3 1000V adjustable busbar support slots (ea) 42.00

5025 5100 universal clamping studs for busbar supports (2 required) (per pair) 106.00

5025 5124 perforated support slot profile 380mm (ea) 140.005025 5125 perforated support slot profile 480mm (ea) 169.005025 5126 perforated support slot profile 580mm (ea) 194.005025 5128 perforated support slot profile 780mm (ea) 222.00

One Complete Busbar Support System: 2 x support slots (per phase) (3P=6 / 4P=8) 1 x (Pr) clamping studs 2 x support profiles (1 x top,1 x bottom)

SBC 10 - compact busbar support - IEC 60439-1 2500A

Multipolar (edgewise mounting) busbar support system fixed interphase distance

• for bars 30-120mm wide x 10mm thick (one or two bars per phase)• up to 50kA rms Icc 110kA peak short circuit current• reverse support to accomodate busbar offset (for joining bars)

5024 6400 10mm 1(or)2 800V 65mm 3pole busbar support (ea) 168.005024 6700 10mm 1(or)2 800V 65mm 4pole busbar support (ea) 171.00

For complete system, order: 2 x supports + 1 x mounting accessory kit (below)

Accessories - (mounting accessory kits) 2 x M8 threaded studs/insulation spacers/nuts

5020 2030 mounting accessory kit (rods/spacers/nuts) for 30mm busbars 127.005020 2040 mounting accessory kit (rods/spacers/nuts) for 40mm busbars 134.005020 2050 mounting accessory kit (rods/spacers/nuts) for 50mm busbars 135.005020 2060 mounting accessory kit (rods/spacers/nuts) for 60mm busbars 140.005020 2080 mounting accessory kit (rods/spacers/nuts) for 80mm busbars 154.005020 2100 mounting accessory kit (rods/spacers/nuts) for 100mm busbars 168.00

SBP 44 - 4 pole angled busbar support system 630A

4 Pole angled busbar support system

• for bars 20-32mm wide x 5-10mm thick (solid or perforated)• up to 30kA rms/Icc 63kA peak short circuit current • thermoplastic • self-extinguishing UL94VO

5026 0450 5/10mm 1 1000V 50mm 4p busbar support (1Pr) 562.00

SB E 44 - 4 pole stair type busbar support system 300A

4 Pole stair type busbar support system

• for flat bars 15/20/30mm wide x 5mm thick (solid or perforated)• up to 22kA rms/Icc 50kA peak short circuit current• DIN rail mountable or bolt down• thermoplastic • self-extinguishing UL94VO

5028 0410 5mm 1 1000V 35mm 4p stair type support (ea) 125.00

Miniature Circuit Breakers (MCB’s ) 3/4.5kA


new

Copper busbar

new

Please note: Prices of copper products are based on the London Metal Exchange and will vary from time to time. Consult our sales department for the latest pricing before placing orders.

MF

MF

IBS

207

GTI...

DZP3000

Maxiflex insulated flexible busbar

Stacked high conductivity electrolytic copper laminates protected within a durable PVC insulation -Offers unlimited twisting and bending possibilities for panelboard assembly.• conductor• insulation : UL94VO Self extinguishing : 2mm thickness : tensile strength 19.6 MPa• dielectric rigidity : 20 kV/mm• nominal voltage : 1000VAC / 1000VDC• working temperature : -40ºC - +105ºC• supplied in 2 meter lengths ∆ T (ºK) refer to description bottom pg

conductor size max. current capacity A at ∆ T (ºK)

type W (thick) 70º 60º 50º 40º 30º price

BFX 1005 9 3 x 0.8mm 196 180 162 141 119 215.00BFX 1020 9 6 x 0.8mm 291 266 240 210 176 332.00BFX 1035 15.5 4 x 0.8mm 339 310 279 244 205 365.00BFX 1045 15.5 6 x 0.8mm 424 389 350 306 257 495.00BFX 1060 20 3 x 1mm 396 363 326 286 240 435.00BFX 1070 20 5 x 1mm 523 479 431 377 317 655.00BFX 1100 24 5 x 1mm 600 550 494 433 363 768.00BFX 1135 32 5 x 1mm 749 686 617 540 453 995.00BFX 1170 40 5 x 1mm 894 818 736 644 541 1220.00BFX 1200 50 5 x 1mm 1068 978 880 770 646 1550.00BFX 1230 63 5 x 1mm 1288 1179 1061 929 779 1870.00

BFX 1150 32 10 x 1mm 1086 995 894 783 657 1870.00BFX 1185 40 10 x 1mm 1279 1171 1053 922 774 2310.00BFX 1215 50 10 x 1mm 1510 1383 1244 1089 914 2860.00BFX 1245 63 10 x 1mm 1798 1646 1481 1245 1088 3580.00

Insulated flexible connection (flexible connection of tinned copper braid with a PVC insulation)

No cutting - No stripping - No crimping - No lug

• pre-punched/ready to use • nominal voltage: 1000V AC - 1500V DC• quick and easy to install • working temperature: -40ºC ~ 105ºC• self extinguishing insulation (to UL94VO) • dielectric strength: 20kV/mm

25mm2 insulated braided link (holes 1 x 10.5mm 1 x 6.5)

GTI1005 20 3 330 mm 220 205 185 175 145 82.00GTI1010 20 3 430 mm 220 205 185 175 145 98.00GTI1015 20 3 530 mm 220 205 185 175 145 110.00GTI1020 20 3 630 mm 220 205 185 175 145 122.00


GTI1030 20 3.5 330 mm 275 250 225 205 170 99.00GTI1035 20 3.5 430 mm 275 250 225 205 170 119.00 GTI1040 20 3.5 530 mm 275 250 225 205 170 138.00 GTI1045 20 3.5 630 mm 275 250 225 205 170 150.00



120mm2 insulated braided link (holes 2 x 10.5mm)


240mm2 insulated braided link (holes 2 x 10.5mm)


Accessories

DZP3000 (H)76 x (W)38 Flexible bar spacer (3 partitions) 21.00

Miniature Circuit Breakers (MCBs ) 6kA


new

Solid copper bar

new

new

208

A

B

E

F

C

D

Solid copper bar (radius edge)

• ETP 99.90% min• conductivity : 100 IACS dimensions size(mm) current type W x D x length capacity description price

GI05020.3 20 5 3m 320A solid copper bar 470.00GI05030.3 30 5 3m 450A solid copper bar 702.00GI10030.3 30 10 3m 630A solid copper bar 1450.00GI10040.3 40 10 3m 850A solid copper bar 1875.00GI10050.3 50 10 3m 1000A solid copper bar 2340.00GI10060.3 60 10 3m 1250A solid copper bar 2810.00GI10080.3 80 10 3m 1500A solid copper bar 3740.00GI10100.3 100 10 3m 1800A solid copper bar 4680.00

New “H” profile solid busbar 720mm2

New “H” profile permits Busbar systems with hight current capacity (1600A) 720mm2

in a very compact area (60mm) busbar centre spacing) • utilizing Wohner 01231 3 pole busbar supports.

GI01249 30 “H” profile 2.4m 1600A “H” profile solid busbar 3750.00

Small dimensioned solid bars (radius edge)

• electrolytic copper• used with supports and clamping yokes to create earth/neutral bars for small distribution boards

GI106006.1 6 6 1m 80A square copper bar 68.00GI03010.1 10 3 1m 65A flat copper bar 55.00

Threaded busbars (bolt/screws not supplied)

• electrolytic copper Cu-ETP 99.90%• radius edge

dimensions size(mm) threaded type W x D x length hole DIA distance apart (mm) price

GI05015TH 15 5 1m M6 25mm threaded bar 180.00GI05020TH 20 5 1m M6 25mm threaded bar 218.00GI10030TH 30 10 2m M8 25mm threaded bar 1220.00

Drum busbar insulators DMC

Simple busbar stand-off insulators with threaded socket top and bottom

Values SM25 SM30 SM35 SM40 SM45 SM51 SM60 SM76

Tensile strength (kg) 220mm 260mm 280mm 300mm 300mm 470mm 700mm 700mm

Torque (kg) 2.8mm 3.8mm 4.8mm 4.8mm 4.8mm 9.5mm 15mm 19mm

Voltage withstand (kV) 6mm 8mm 10mm 12mm 12mm 15mm 20mm 25mm

Screw diameter (mm) 6mm 8mm 8mm 8mm 8mm 8mm 10mm 10mm

type height threaded voltage description price socket dia withstand

SM25 25mm 6mm 6kV busbar insulator 6.80SM30 30mm 8mm 8kV busbar insulator 8.90SM35 35mm 8mm 10kV busbar insulator 9.70SM40 40mm 8mm 12kV busbar insulator 12.00SM45 45mm 8mm 12kV busbar insulator 12.40SM51 51mm 8mm 15kV busbar insulator 12.80SM60 60mm 10mm 20kV busbar insulator 19.00SM76 76mm 10mm 25kV busbar insulator 22.00

Dimensions SM25 SM30 SM35 SM40 SM45 SM51 SM60 SM76

A 25mm 30mm 35mm 40mm 45mm 51mm 60mm 76mm

B 23mm 26mm 28mm 34mm 28mm 29mm 34mm 36mm

C 27mm 32mm 32mm 40mm 37mm 36mm 47mm 50mm

D Ø 6mm 8mm 8mm 8mm 8mm 8mm 10mm 10mm

E 9mm 10mm 10mm 10mm 10mm 13mm 13mm 16mm

F 9mm 10mm 10mm 12mm 10mm 12mm 14mm 23mm

Please note: Prices of copper products are based on the London Metal Exchange and will vary from time to time. Consult our sales department for the latest pricing before placing orders.

busbar systems and accessories - ec electrical &...

Documents