businesslineisdn - swisscom · pbx partial rerouting: calls are rerouted direct-ly by the central...

3
01.03.2008 Swisscom SME | Calling made easy A PBX that offers flexible capacities • ISDN access to the fixed-network of Swisscom • Any number of lines: 2 basic access and/or 30 primary access lines with one main access number, both with or without direct dialling • Up to 10 number blocks of 10, 100 or 1000 direct dialling numbers each. Programmed for optimum functionality Call Completion to Busy Subscriber: automati- cally redials the number called as soon as the line becomes free. (Only available to customers without Carrier Preselection, i.e. another carrier’s prefix. CCBS does not redial mobile connections.) Outgoing Call Barring: At your wish, barring of 0906 erotic numbers or all added value numbers (service 0900, 0901, 0906). Three additional bar- ring sets (e.g. all international calls) are available as fee-based options. Subadress: enables an additional level of addres- sing to the B-subscriber’s number, for example to call a specific terminal on a local area network (LAN). The address length may be up to 20 bytes. Multiple Hunting: enables the distribution of incoming calls to free lines (message or B chan- nels) on the ISDN basic and primary connections of the relevant BusinessLINE ISDN . User-to-User Signalling: transmits short messages during call setup or teardown (e.g. a call-back request). PBX Partial Rerouting: Calls are rerouted direct- ly by the central exchange, thus not tying up two PBX message channels. Multiple identification or recognition options Your ISDN terminal displays a caller’s number. And when you call someone, you see the numb- er of the access line where your call is received. Reversely, you can use the keypad for individual calls to prevent your number being displayed at the recipient’s ISDN access. Or before taking a call, you can activate COLR to prevent the number where you receive the call from being displayed on the caller’s ISDN terminal (this function must however be supported by the PBX and the ISDN terminal). With the voice message «The Swisscom customer does not wish to receive calls from unidentified calling numbers.», you can reject calls not permitting calling-line identification. BusinessLINE ISDN Efficient fixed-line communications for your company.

Upload: others

Post on 17-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: BusinessLINEISDN - Swisscom · PBX Partial Rerouting: Calls are rerouted direct-ly by the central exchange, thus not tying up two PBX message channels. Multiple identification or

01.0

3.20

08Sw

issc

om S

ME

| C

allin

g m

ade

easy

A PBX that offers flexible capacities

• ISDN access to the fixed-network of Swisscom• Any number of lines: 2 basic access and/or

30 primary access lines with one main access number, both with or without direct dialling

• Up to 10 number blocks of 10, 100 or 1000 direct dialling numbers each.

Programmed for optimum functionality

Call Completion to Busy Subscriber: automati-cally redials the number called as soon as the line becomes free. (Only available to customers without Carrier Preselection, i.e. another carrier’s prefix. CCBS does not redial mobile connections.)

Outgoing Call Barring: At your wish, barring of 0906 erotic numbers or all added value numbers (service 0900, 0901, 0906). Three additional bar-ring sets (e.g. all international calls) are available as fee-based options.

Subadress: enables an additional level of addres-sing to the B-subscriber’s number, for example to call a specific terminal on a local area network (LAN). The address length may be up to 20 bytes.

Multiple Hunting: enables the distribution of incoming calls to free lines (message or B chan-nels) on the ISDN basic and primary connections of the relevant BusinessLINEISDN.

User-to-User Signalling: transmits short messages during call setup or teardown (e.g. a call-back request).

PBX Partial Rerouting: Calls are rerouted direct-ly by the central exchange, thus not tying up two PBX message channels.

Multiple identification or recognition options

Your ISDN terminal displays a caller’s number. And when you call someone, you see the numb-er of the access line where your call is received. Reversely, you can use the keypad for individual calls to prevent your number being displayed at the recipient’s ISDN access. Or before taking a call, you can activate COLR to prevent the number where you receive the call from being displayed on the caller’s ISDN terminal (this function must however be supported by the PBX and the ISDN terminal). With the voice message «The Swisscom customer does not wish to receive calls from unidentified calling numbers.», you can reject calls not permitting calling-line identification.

BusinessLINEISDN

Efficient fixed-line communications for your company.

Page 2: BusinessLINEISDN - Swisscom · PBX Partial Rerouting: Calls are rerouted direct-ly by the central exchange, thus not tying up two PBX message channels. Multiple identification or

Swis

scom

SM

E |

Cal

ling

mad

e ea

sy01

.03.

2008

Full calling costs transparency

Running/accrued connection charges are dis -played during an/or at the end of a call. Howe -ver, the display does not contain any discounts

a detailed list of all calls (number called, date, time, duration and charges) placed from your line. The DDI is given separately.

Service and support

Directory listing and one free directory: For each

free printed telephone directory of your region, and you are entitled to one main entry in the (continuously updated) central electronic direc -tory and the corresponding book.

The Swisscom repair service: is always available on number 0800 055 055. In the case of systemmalfunctions, BusinessLINE ISDN

service.

And many more interesting options

Call Forwarding Unconditional:provided at the Swisscom exchange. Perma -nently or temporarily you can renounce on your old physical network connection. It’s a form of call forwarding especially useful in case of

You continue to be reached at the old number. (Please note: The caller pays charges only up to the number dialled. The costs from the forwar -ding terminal to the destination are charged to you. These charges do not appear on the charge meter.)

Permanent Calling Line Identification Restric-tion: You can prevent your number ever being displayed at the recipient’s ISDN access. Excepti -on: emergency calls.

Calling/Connected Line Identification Presen-tation with Special Arrangement: In addition

from/to the caller/recipient without being

numbers are provided to the recipient (the

number). The caller is only provided with the

Refusal of Reversed-Charge Calls (which the called party would have to pay): By refusing reversed-charge calls, e.g. owners of hotels,

their guests’ calls. (Please note: certain foreign providers don’t respect reversed-charge call blo -cking. In such cases, Swisscom has to disclaim liability for any calling charges incurred.)

Combox pro – the invisible answering machine with fax and Internet access: No additional equipment is required because Combox pro is

and is installed as a supplementary service to your telephone line. You can order Combox pro installation free of charge through our help desk on 0800 55 22 86. For further information see Swisscom’s Web site or visit any Swisscom Shop. You can control your Combox pro from

mobile phone or any PC with an Internet con -nection.

Page 3: BusinessLINEISDN - Swisscom · PBX Partial Rerouting: Calls are rerouted direct-ly by the central exchange, thus not tying up two PBX message channels. Multiple identification or

Swis

scom

SM

E |

Cal

ling

mad

e ea

sy

Among the benefits Combox pro provides are:• Your personal fax number• Memory for 50 voice and 50 fax messages• Receive multiple faxes at the same time• Outgoing messages for domestic and interna-

tional calls• Automatic redial through keypad• Automatic forwarding of your voice and fax

messages by e-mail• The ability to print your faxes on any fax

machine in the world• Notice of new messages through your

telephone (Message Waiting Indication (MWI), as soon as the service is available)

• Location-independent notification of new messages by SMS or e-mail

• Voice control in your choice of D, F, I, E• Direct dialling in (DDI): all terminals connected

to a private branch exchange (PBX) can be dialled directly.

Please note: Combox pro is available only for Swisscom fixed network lines without Carrier Preselection (CPS).

For actual information on BusinessLINEISDN see www.swisscom.ch on the Internet, your Swisscom advisor or specialist retailer.

01.0

3.20

08