butterfly garden equipment manufacturer idea-2001design number: idea-2001 - compliance and technical...
TRANSCRIPT
Equipment Manufacturer
IDEA-2001
Butterfly Garden
0.5 1.0
05'
Meters2.0 3.0
10'
BUTTERFLY
CLIMBERS (Qty. 6)
PART# ZZXX0480
6'
[1.84M]
6'-1"
[1.87M]
6'-2"
[1.88M]
9'-1"
[2.76M]
6'
[1.83M]
6'-3"
[1.91M]
6'-1"
[1.86M]
6'-2"
[1.87M]
6'-1"
[1.85M]
32'
[9.76M]
26'-2"
[7.97M]
SILLY TREE
PART# ZZXX0885
GARDEN PANEL
W/ A-MAZ-ING INSERT
PART# ZZXX0888
PART# ZZUN4673
PLAYWORLD SYSTEMS, INC.
1000 Buffalo Road
Lewisburg, PA
17837-9795 USA
BPaper Size
DATE:
SCALE:PROJECT NO:
*PLAYGROUND SUPERVISION REQUIRED
DRAWN BY:
USER CAPACITY: AGE GROUP:
AREA: PERIMETER:
EQUIPMENT SIZE:
USE ZONE:
FALL HEIGHT:
CPSC #325ASTM F1487-
BU
TTER
FLY
GA
RD
ENC
AT
AL
OG
P
RE
-D
ES
IG
N
IDEA-2001 1/4"=1'-0"
M. MERTZ
24-JAN-20
-
32'0" x 26'2"9,768M x 7,97M
589 SqFt.54,72 SqM.
100'10"30,73M
0'10"0,25M
32 2-5
11
Activity Panels
ZZUN4673 11 A-MAZE-ING INSERT
Additional Tool & Maintenance Kits
ZZUN9910 12 SURFACING WARNING LABEL KIT
ZZUN9936 13 MAINTENANCE BOOK
ZZXXGNGUID 14 GENERAL INSTALLERS GUIDE
Part No. Description
Butterfly GardenDesign Number: IDEA-2001 - Bill Of Material
Ref.No. Quantity
Thursday, November 21, 2019 Page of1 1 Playworld.com
CertifiedZZXX04801 PLAYTOWN BUTTERFLY CLIMBER 6 238.80 1,127 6 6.00 1.80 6
N/AZZXX08852 SILLY TREE 1 854.00 TBD 18 6.00 0.00 12
N/AZZXX08883 GARDEN SENSORY WALL W/ 1 INSERT1 165.00 TBD 6 1.50 0.00 4
CertifiedZZUN46734 A-MAZE-ING INSERT 1 14.51 198 2 0.25 0.00 1
CertifiedZZUN99105 SURFACING WARNING LABEL KIT 1 0.05 1 0 0.25 0.00 0
N/AZZUN99366 MAINTENANCE BOOK 1 1.00 TBD 0 0.25 0.00 0
N/AZZXXGNGUID7 GENERAL INSTALLERS GUIDE 1 1
DescriptionConcrete
(Yds3)
TotalWeight
(lbs) Users
Pre-Consumer
Recycled Content(lbs)
CO2eFootprint
(kgs)InstallHours
Ref.No.
Butterfly GardenDesign Number: IDEA-2001 - Compliance and Technical Data Reference Document: ASTM F1487
UnitASTMStatus
ActivePlay
Events
Post-
Part No. Qty.
42 70 1,326 32 14.25 1.801,273.36 23Totals:
1 Metric Tons32 Kg19 Kg114.46 Kg 1.37 m3
Thursday, November 21, 2019 Page of1 2 Playworld.com
DescriptionConcrete
(Yds3)
TotalWeight
(lbs) Users
Pre-Consumer
Recycled Content(lbs)
CO2eFootprint
(kgs)InstallHours
Ref.No.
Butterfly GardenDesign Number: IDEA-2001 - Compliance and Technical Data Reference Document: ASTM F1487
UnitASTMStatus
ActivePlay
Events
Post-
Part No. Qty.
The lay-out for this custom playscape, design number IDEA-2001, has been configured to meet the requirements of the ASTM F1487 standard. In addition, each of the above components listed as "Certified" have been tested and are IPEMA certified. Components listed as "Not Applicable" do not fall within the scope of the ASTM F1487 standard and have not been tested. IPEMA certification can be verified on the IPEMA website, www.ipema.org. In the interest of playground safety, IPEMA provides a Third Party Certification Service which validates compliance.
The CO2e (carbon footprint given in Kilograms and Metric Tons) listed above is a measure of the environmental impact this play structure represents from harvesting raw materials to the time it leaves our shipping dock. Playworld Systems nurtures a total corporate culture that is focused on eliminating carbon producing processes and products, reducing our use of precious raw materials, reusing materials whenever possible and recycling materials at every opportunity. Playworld Systems elected to adopt the Publicly Available Specification; PAS 2050 as published by the British Standards Institute and sponsored by Defra and the Carbon Trust. The PAS 2050 has gained international acceptance as a specification that measures the greenhouse gas emissions in services and goods throughout their entire life cycle.
The lay-out was also designed to meet the 2010 Standards published 15-Sep-2010, by the Department of Justice when installed over a properly maintained surfacing material that is in compliance with ASTM F1951 "Accessibility of Surface Systems Under and Around Playground Equipment" as well as ASTM F1292, "Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment", appropriate for the fall height of the structure.
Installation times are based on one experienced installer. A crew of three experienced individuals can perform the installation within the given time, each member working 1/3 of the given hours. [Eg. Installation Time = 30 hours. For a crew of three, each member will work 10 hours on the installation for a total of 30 hours on the project.]
A measurement, in pounds, that qualifies the amount of material that was captured as waste and diverted from landfill during an initial manufacturing process and is being redirected to a separate manufacturing process to become a different product. E.g. 100% of our Aluminum Tubing is made from captured waste material during the manufacturing process of extruded Aluminum products such as rods, flat bars and H-channels.
A measurement, in pounds, that qualifies the amount of material that was once another product that has completed its lifecycle and has been diverted from a landfill as a solid waste through recycling and is now being used in a Playworld Systems' product. E.g. **20% to 40% of the steel in our steel tubing and sheet steel have been diverted from landfills. Automobiles are scrapped and recyclable steel is purchased by the steel mill that produces our raw product.** The amount of Post-Consumer recycled steel fluctuates daily based on the availability of the recycled steel.
ASTM F1487
2010 ADA Standards for Accessible Design
Installation Times
Carbon Footprint
Pre-Consumer Recycle Content
Post-Consumer Recycle Content
Thursday, November 21, 2019 Page of2 2 Playworld.com