ORDERLY LIQUIDATION SALEBY PRIVATE TREATY OF

CONSOLIDATED EXTRUSIONS PTY LTD.Ingleburn, Australia (30 km from Sydney Airport)

Machinery for the Melting, Casting, Extrusion,Drawing, Pickling, Stretching, Straightening,and Finishing of Copper and Brass Shapes,

Rounds, Tubes, Flats & Busbar

Machinery International Corp.10A Hershey Drive, Ansonia, CT, USA 06401 +1 203-736-9000 +1 203-736-9003

www.machyintl.com sales@machyintl.com

FOR SALE EXCLUSIVELY THROUGH

3040 Ton UBE Oil Hydraulic Extrusion Press (8268)

MELTING AND CASTING DEPT.

Machinery International Corp. +1 203-736-9000 +1 203-736-9003

MELTING FURNACES

CASTING LINES

210kw Pantech Junker Induction Melting Furnace, 14 Ton Capacity, Channel Type, 4.8 Tons/HR, New 1990 (8252)

2.5 MW Inductotherm Coreless Induction Melt Furnace, 10 Ton Capacity, 7.75 Tons/HR, PLC Controls, New 1997 (New Power Unit 2003) (8253)

2.5 MW Inductotherm Coreless Induction Melt Furnace, 12 Ton Capacity, 7.75 Tons/HR, PLC Controls, New 2000 (8254)

Technica Guss Twin Strand Billet Caster w/ 300kw Junker Holding Furnace, 11 Ton Cap., Twin Billet Caster for 180mm (7”) and 240mm (9 1/2”) Dia., Billets, Travelling Saw, Withdrawal Unit, 1990 (8255)

Twin Strand Billet Caster w/ 300kw Channel Holding Furnace, 11 Ton Cap., Twin Billet Caster for 180mm (7”) and 240mm (9 1/2”) Dia. Billets, Travelling Saw, Withdrawal Unit, 1997 (8256)

Twin Strand Semi-Continuous Caster for 180mm (7”), 200mm (7.8”) and 240mm (9 1/2”) Dia. Billets, 4.2m Length (8257)

Torftech Gas-Fired Swarf Dryer, 1 Ton/HR, 1989 (8258)

Lahr Baghouse Air Cleaning Unit, 70,000 cu. Meters/HR, Emission Monitoring and Logging, Quench System, New 1989 (8259)

Kaltenbach Billet Saw for Billets up to 260mm (10”), 1200mm (48”) Dia. Blade, Driven Roller Tables, Upgraded 2003 (8260)

Moroz Alligator Scrap Shear, Model HF30 w/ Tables (8262)

Technica Guss 3 Strand Caster (8255)

Inductotherm Melting Furnace (8254)

Junker Furnace Control Room (8252)

Kaltenbach Automatic Billet Saw (8260)

EXTRUSION PRESSES

Machinery International Corp. +1 203-736-9000 +1 203-736-9003

3040 Ton UBE Oil Hydraulic Extrusion Press w/ 593 Ton Piercer, New 1984, Billet Size 194mm (7 1/2”) and 245mm (9.6”), 6 Variable and 4 Fixed Pumps, 10x160 kw Main Motors, Modicon PLC Controls, Junker Gas-Fired Billet Heater, 6 Zone, For 180mm - 250mm (7”-10”) Billets and New PLC Controls in 2001, Runout for Straight Lengths 12 m (39 ft), Dual Coilers for 600mm (24”) ID x 1000mm (39”) OD, Double Saw Cutoff System New 2004 (8268)

3040 Ton UBE Press (8268)

3040 Ton UBE - Exit End (8268) 3040 Ton UBE - Discharge Conveyor (8268)

3040 Ton UBE - Junker Billet Furnace (8268)

EXTRUSION PRESSES

Machinery International Corp. +1 203-736-9000 +1 203-736-9003

2050 Ton Schloemann Oil Hydraulic Extrusion Press with 315 Ton Piercer, Billet Size 125mm (5”) and 250mm (10”) Dia. x 760mm (30”) Long, 3 Variable and 2 Fixed Pumps, 2 x 300 kw and 1 x 140 kw Motors, New Siemens PLC Controls 1989, New Discard System 1997, Granco Gas Fired Billet Furnace, 10 Tons/HR, Walking Beam Runout System, 40m (131 ft), Dual Coilers 600mm ID x 1000mm OD, Double Cutoff Stops (8266)

35 Ton, 10m (32 ft) Draw, 1985 with Push Pointer (8277)23 Ton, 75 HP, 6m (20 ft) Draw with 120 Ton Push Pointer (8273)17 Ton, 60 HP, 6m (20 ft) Draw for Large Flats with Cutoff Saw, PLC Controls (8273)15 Ton, 50 HP, 6m (20 ft) Draw from Coil, Push Pointer, Saws (8276)11 Ton, 50 HP, 6m (20 ft) Draw with 80 Ton Push Pointer (8272)10 Ton, 25 HP, 5.7m (18 ft) Draw with Push Pointer (8275) 5 Ton, 40 HP, 10m (32 ft) Draw for Shapes, Band Saw Pointer (8327)

2050 Ton Schloemann Press (8266)

Drawbench for Bars & Flats (8276) Drawbench for Bars & Flats (8273)

2050 Ton Schloemann Press -Discharge Conveyor (8266)

DRAWBENCHES

DRAWING & FINISHING

Machinery International Corp. +1 203-736-9000 +1 203-736-9003

Schumag K-0B, 3-8mm Hex & Square, 0-120 m/min. with Dual Chamfer, Polisher, Siemans PLC, New 1998 (8283)Schumag KZ-RPG 0, 2-6.5mm Hex & Square, Integrated Cut to Length and Dual Chamfer (8282 & 8286)Schumag KZRP-1, 4-13 mm Hex & Square, In-Line Cut to Length and Dual Chamfer (8284)Schumag KZRP-1, 5-13mm Rounds, Hex & Square, w/ Integrated Rissingold Cut to Length and Dual Chamfer (8285)Schumag KZRP-2B, 12.7-28mm Round, Hex & Square, Polisher, Push Pointer, Integrated Cut to Length and Dual Chamfer, (8281)

Kieserling WRB 40BF Two Roll Straightener for 10-51mm (0.4”-2”) Bar, 45kw, Fully Automated, Siemans PLC, Cut to Length, Auto Loading and Discharge, New 1996 (8293)Torrington 18 Roll 2 Plane Straightener, 15-51mm (0.6”-2”) Bar, In-Line Cut to Length and Chamfer (New 2001) 20 HP (8290)Robertson 12 Roll 2 Plane Straightener, 30-76mm (1.2”-3”) Bar & Hex, 30 HP (8288)Robertson 16 Roll 2 Plane Straightener, 12-40mm (1/2”-1 1/2”) Bar & Hex with Ris-Ingold AG 4657 Type RID68 Dual Chamfer / Cut to Length (8289) 75 Ton Hyd. Stretch Straightener, 12m (40 ft.) with Saw (8322) 45 Ton Hyd. Stretch Straightener, 12m (40 ft.) with Saw (8321) 25 Ton Hyd. Stretch Straightener with Cut to Length, Mod. 1998 (8320) 8 Ton Hyd. Stretch Straightener with Integrated End Cut Saws (8323)150 Ton Hyd. Straightening Press for Bars up to 76mm (3”) Dia. (8330)

Schumag Combined Drawing Machines

Rod & Bar Finishing

Kieserling Automated Straighten/Chamfer (8293) Torrington Str., Cut & Chamfer (8290)

SchumagModel KZRP-2B

(8281)

Schumag Model K2-OB(8283)

SAWS & WIRE

Machinery International Corp. +1 203-736-9000 +1 203-736-9003

Adige CM500 Automatic Load, Feed, Cut and Sort (8324)Elumatic 8A 103/25 with Auto Feed for Slugs & Parts (8325)

RWF Two Stand Wire Flattening Mill with 9” x 8” Water Cooled Rolls, Welder, Wipers, Turkshead, Take-up Capstan and Traversing Spooler (8305)Koch Triple Black Wire Drawer with 670-670-600mm (26”-26”-24”) Blocks, Takeup, PLC Controls (8300)Showa Triple Block Wire Drawer with 620-560-460mm (24”-22”-18”) Blocks, Tandem or Separate (8309)

Saws

Wire Mill and Welding Wire

Single Die Blocks

RWF 2 StandWire Flattener

(8305)

Koch 3 Die Wire Drawer(8300)

Behringer HBP 360 A Horizontal Bandsaw with Tables (8326)Oliver Batch Cut Saw for Single, Multiple, or Bundle Cuts (8291)

HP(kw)75HP75HP55HP45HP30KW75HP75HP40HP30KW60KW

Size Range2 - 18mm3 - 18mm4 - 12mm4 - 10mm

2.6 - 10.5mm1.6 - 8mm

3.15 - 11mm1.2 - 4mm4 - 10mm

15 x 2.5mm - 50 x 3.18mm

Conex #52484951535459615657

IMC#8302829882998301830383048308831083068307

Block Dia.30”24”24”24”24”24“24”24”22”20”

MakerBartinShowaShowaKoch

CustomCustom

UnityMarshall RichardsMarshall Richards

Malmedie

Wire Straighten & Cut MachinesLewis 2.4-6.4mm (8313) Hudson 3-6mm (8314) MRP 2-5mm (8315) MRP 2-5mm (8316)Takashima 1.6-2mm (8311) Takashima 2-2.6mm (8312)

Annealing FurnacesMartin Gas-Fired Box Anneal, 6mx4mx1.4m Inside Dim. (8294)Dowel Gas-Fired Box Anneal, 4.3mx1.3mx3m Inside Dim. (8295)Furnace Engineering Gas-Fired Box Anneal, 6.5mx1.2mx1.5m Inside Dim (8296)

Rod Pickling Dept.Rod Pickle Tank System for Straight Lengths up to 6m (20 ft.) in Bundles up to 2500 kg (5500 lbs.) or Coils up to 2000 kg (4400 lbs.) with Copper Recovery Unit and Crane (8269)Rod Pickle Tank System for Coils up to 1100 mm (43”) O.D., 6 Tons/HR, Fully Automated, New 1989 (8270)

MISCELLANEOUS

Machinery International Corp. +1 203-736-9000 +1 203-736-9003

Complete Rod Storage Rack System with Side LoadersSeifer Model 5240 Large Section Corrector, New 1984 (8317)Seifer Model 7570 Small ection Corrector, New 1978, 50 Bars/HR, Two Avail. (8318)National Cold Forge 5/8” (15.8mm) Bolt Maker, 70 HP, 60/PPM, Tooled to Make Anode Balls (8329)Fenn Model 5F 4 Die Rotary Swager 8287)ARL Spectrometer, Type XRF, New 1989 with Software Installed 2004Jarrel Ash Inductively Coupled Plasma (ICP) Spectrometer with CID Camera System, New 2002 (8265)

75 TonStretch

Straightener (8322)

Behringer Bandsaw HBP 360A(8326)

PLUS A COMPLETE MACHINE SHOP,TOOLROOM AND DIE MAKING DEPARTMENT

Jarrel Ash ICP Spectrometer, New 2002 (8265) 70,000 Cu. M/HR Lahr Baghouse (8259)

TERMS OF SALE

Machinery International Corp.

Machinery International Corp.

Consolidated extrusions is located approximately 45 minutes from the Sydney,Australia Airport. All machines are subject to prior sale. Inspection visits are by appointment only and must be scheduled throughMachinery International Corporation. For additional technical information, visit our website at WWW.MACHYINTL.COMand click on the icon for “FOR SALE - COMPLETE ROD AND BAR PLANT, #8190” For prices, quotations, directions or to schedule an inspection visit, contact:

10A Hershey Drive, Ansonia, CT, USA 06401 USA +1 203-736-9000 +1 203-736-9003

www.machyintl.com sales@machyintl.com

ORDERLY LIQUIDATION SALE10A Hershey Drive, Ansonia, CT, USA 06401 USA sales@machyintl.com +1 203-736-9000 +1 203-736-9003 www.machyintl.com