MC-2228AC

* Refer to complete instructions for use for detailed technique and instructions.

TO ORDER CALL: 800-BIS-DENT (800-247-3368)

BISCO products are proudly made in the U.S.A.

www.bisco.com

ORDERING INFORMA-

KIT CONTENTSACE ALL-

BOND TE STARTER KIT B-36100K 2 ACE ALL-BOND TE Cartridges (2ml ea., mixed), 1 ACE Dispenser, 1 Syringe UNI-ETCH w/BAC (5g), Accessories, Instructions/MSDS

REFILLS 4 CARTRIDGE PACKAGE B-36050P 4 ACE ALL-BOND TE Cartridges (2ml ea., mixed), Accessories, Instructions/MSDS

ACE DISPENSER U-30220P 1 ACE Dispenser, 1 Mixing Well, Instructions

AC

E®

ALL-B

ON

DSE

®

ACE® ALL-BOND SE® sets new standards in self-etch bonding technology.

Rx Only

ORDERING INFORMATION

Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U-30110K2 ACE ALL-BOND SE Cartridges (2ml ea., mixed), 1 ACE Dispenser, Accessories, Instructions/MSDS

4 Cartridge Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U-30201P4 ACE ALL-BOND SE Cartridges (2ml ea., mixed), Accessories, Instructions/MSDS

ALL-BOND SE LINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U-3015P1 Bottle ALL-BOND SE Liner (4ml), Instructions/MSDS

ACE Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U-30220P1 ACE Dispenser, 1 Mixing Well, Instructions

ALL-BOND SE takes self-etch bonding to a whole new level of performance

DIRECT RESTORATION PLACEMENT TECHNIQUE USING ACE ALL-BOND SE*

Dry preparation DispenseALL-BOND SE

Light cureGently air dry Mix until pink Apply ALL-BOND SE

SELF-ETCH SIMPLICITY

The following clinical case illustrates the use of a self-etch adhesive system for a patient wishing toreplace an amalgam restoration in the upper left firstmolar. The treatment choice was a direct compositerestoration. ALL-BOND SE was selected as the bond-ing agent because it maintains a secure seal to preventmicroleakage and thus help prevent post-operative sensitivity while reducing chairtime.

Remove amalgam restorationand isolate tooth with a rubber dam.

Mix ALL-BOND SE until uniformly pink.

Place ALL-BOND SE onenamel and dentin. Agitateand air dry, then light cure for10 seconds.

Place ALL-BOND SE Liner ina very thin layer and lightcure for 10 seconds.

Restoration followingcomposite build-up.

Courtesy of Dr. Rolando Nuñez

1 2

3 4

5

Upper left first molar with existing amalgam restoration.

6

UNIVERSAL COMPATIBILITYIN A SELF-ETCH ADHESIVEA major limiting factor in the use of self-etch bonding is theincompatibility of most self-etch adhesives with self- anddual-cured materials.

ALL-BOND SE is compatible with light-, self- and dual-cured materials without the use of any additional activators, freeing dentists who prefer the convenient self-etch bonding process from any procedural limitations.

ALL-BOND SE can be used for indirectapplications or with self- or dual-cured composites and cements and does notrequire extra steps to achieve compatibility.

Directs Indirects

LC DC Cement DC CementComposite in in

Products LC Mode SC Mode

ALL-BOND SE® YES YES YES

Clearfil® S3 Bond YES NO NO

G-Bond™ YES YES NO

Adper™ Prompt™ L-Pop™ YES NO NO

Xeno® IV YES YES YES*

Clearfil® SE Bond YES NO NO

Optibond® All-in-One YES YES YES**

* Xeno IV requires a separate dual-cure activator.** With Optibond All-in-One, NX3 resin cement must be used when there is

no or limited light accessibility.

Data compiled from respective manufacturer’s instructions for use.Trademarks are property of their respective owners.

THE NEW STANDARD IN SELF-ETCH BONDING

INCREASED FLEXIBILITY

ALL-BOND SE provides universal compatibility, addedbond strength, a color change indicator ensuring a propermix and other unique characteristics that give dentists all-new flexibility in providing patients with quality treatmentusing a self-etch bonding agent.

RADIOPAQUE RESIN LAYER FOR EASY IDENTIFICATION ON RADIOGRAPHS

Another advantage of the ALL-BOND SE Liner is that it isradiopaque, allowing the adhesive layer to be identifiedwhen viewed on X-rays in areas where adhesives com-monly pool. The radiopacity assists in reducing the risk ofmisdiagnosing caries.

ADDED BOND STRENGTH AND RELIABILITY

ALL-BOND SE was developed to provide superior bondstrength from a self-etch adhesive. With the additional useof ALL-BOND SE Liner, added strength and support to thebond interface can be achieved, especially important in larger restorations. As a hydrophobic layer, ALL-BOND SELiner acts as an additional barrier in preventing permeabilityof the bond interface. This improves the duration andintegrity of the bond.

This Scanning Electron Microscope (SEM)image shows a perfect coupling of ALL-BOND SE Liner with the ALL-BOND SEAdhesive and dentin. Ideal sealing fordentin under a reduced step application.

ALL-BOND SELiner Layer

ALL-BOND SEAdhesive Layer

Dentin

Shear Bond Strength to Dentin (MPa) Shear bond strength generated using

Ultradent method on dentin

As shown above, ALL-BOND SE outperformsother self-etch adhesives in shear bond strength.

Data on file. BISCO, Inc.

As shown here, the ALL-BOND SE Liner is visible on the radiograph.

REDUCED PATIENT POST-OPERATIVE SENSITIVITY

The use of ALL-BOND SE effectively reduces or eliminatesthe potential for post-operative sensitivity. ALL-BOND SEworks with the smear layer in maintaining a secure seal toprevent microleakage and fluid movement, ensuring yourpatients will not experience post-operative sensitivity.

ACE ALL-BOND SE* is the innovative, hand-held, all-in-one

adhesive system that lets you etch, prime and bond in one

simple application. ALL-BOND SE is a light-cured self-etching

adhesive available in a convenient cartridge delivery that fits

into the ACE dispenser. ACE takes the guess work out of every

procedure by accurately dispensing the correct proportion of

material for predictable results every time.

CONVENIENT AND PREDICTABLE DISPENSING

PROVEN ALL-BOND TECHNOLOGY -

Only BISCO can offer

you the stability of a two

component self-etch

adhesive with the ease

and convenience of

one bottle adhesive.

* Patent Pending.

• Easy to use

• Superior and reliable bond strength

• Minimizes post-operative sensitivity

• Compatible with all curing methods(without additional activators)

In an 18-month Class V clinical evaluation,

AALLLL--BBOONNDD SSEE aacchhiieevveedd eexxcceelllleennttrreessuullttss wwiitthh 9922..55%% rreetteennttiioonn!!

(Independent University Study)