c l e a n i n g a n d ma i n te n a n c e i n s tr u c ti

6
We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing. Forestmade accepts no liability for any damage to the floor, walls, plumbing, vanity cabinet, sink, countertop, or personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the vanity for damage. If any damage is found, contact our Customer Relations team at 1-855-738-1378. ***Items that are damaged should NOT be installed*** Before Beginning Ensure that you have gathered all the required materials that are needed for the installation. Ensure that your bathroom floor is adequately supported, and the finished floor is level. Ensure that there is adequate support behind the bathroom wall before installation. Vanity Base installed square and plumb with wall and floor Vanity Base also needs to be level Getting Started Flat, non-abrasive work surface (blanket or smooth cardboard) Philips-head screwdriver Carpenter's level Utility blade Tool and Material Requirements Avoid abrasive and harsh chemical cleaners To maintain and protect luster of vanity sink components Cleaning and Maintenance Instructions Vanity Installation Guide

Upload: others

Post on 04-May-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: C l e a n i n g a n d Ma i n te n a n c e I n s tr u c ti

We recommend consulting a professional if you are unfamiliar with installing bathroom fixturesand plumbing. Forestmade accepts no liability for any damage to the floor, walls, plumbing,vanity cabinet, sink, countertop, or personal injury during installation. Observe all local plumbingand building codes. Unpack and inspect the vanity for damage. If any damage is found, contactour Customer Relations team at 1-855-738-1378. ***Items that are damaged should NOT be installed***

Before Beginning

Ensure that you have gathered all the required materials that are needed for the installation. Ensure that your bathroom floor is adequately supported, and the finished floor is level. Ensure that there is adequate support behind the bathroom wall before installation.Vanity Base installed square and plumb with wall and floor Vanity Base also needs to be level

Getting Started

Flat, non-abrasive work surface (blanket or smooth cardboard) Philips-head screwdriver Carpenter's levelUtility blade

Tool and Material Requirements

Avoid abrasive and harsh chemical cleaners To maintain and protect luster of vanity sink components

Cleaning and Maintenance Instructions

Vanity Installation Guide

Customer Service: 1 855-738-1378

[email protected]

Vanity Installation Guide | 1

Page 2: C l e a n i n g a n d Ma i n te n a n c e I n s tr u c ti

Customer Service: 1 855-738-1378

[email protected]

Vanity Installation Guide | 2

Tools and Materials

Crate Storage and Care

Keep the countertop and sink in its box untilinstallation Store Crate vertically in safe location

Do not stack anything on top of box

Page 3: C l e a n i n g a n d Ma i n te n a n c e I n s tr u c ti

Customer Service: 1 855-738-1378

[email protected]

Vanity Installation Guide | 3

Cabinet Installation1) Determine location of where you would like toinstall your vanity

2) Once located, mark the location of the studswhere vanity will be fastened too. Use stud finerto located studs.

IMPORTANT: if studs in your bathroom do not line up withmounting on your vanity - wood blocking can be installedbetween studs using 2 x 4's. We recommend consultingwith a professional if you are unfamiliar with installation.

3) Place vanity in the installation location. Checkthat vanity cabinet is level.

IMPORTANT: if not vanity cabinet is not leveled, usewooden shims to adjust.

4) Attach your vanity to the wall by screwing throughthe back of the vanity cabinet. Use the marked studlocations as a guide.

Page 4: C l e a n i n g a n d Ma i n te n a n c e I n s tr u c ti

Customer Service: 1 855-738-1378

[email protected]

Vanity Installation Guide | 4

Countertop Installation

1) Apply a bead of silicone sealant around the topedge of the vanity cabinet.

2) With another person, SLOWLY and CAREFULLYset the countertop onto the vanity cabinet. Once placed,press firmly into place. Wipe away any excess sealantusing a damp cloth.

IMPORTANT: The countertop is very fragile. Take cautionwhen handling and have someone to assist you.

3) BACK-SPLASH - place a generous amount ofsilicon sealant on the back of it and press back-splashinto place. Fill any gaps that are left with siliconesealant. Wipe any excess sealant with a damp cloth.

IMPORTANT: if not vanity cabinet is not leveled, usewooden shims to adjust.

4) Let the assembled vanity sit for 24 hours. Allowingsilicone sealant to fully dry. Once dry, proceed toinstall faucet and drain

24hr

Page 5: C l e a n i n g a n d Ma i n te n a n c e I n s tr u c ti

Customer Service: 1 855-738-1378

[email protected]

Vanity Installation Guide | 5

48" Single Acadian Vanity

Page 6: C l e a n i n g a n d Ma i n te n a n c e I n s tr u c ti

Customer Service: 1 855-738-1378

[email protected]

Vanity Installation Guide | 6

63" Double Acadian Vanity - Cabinet