c10_11-08_completo.pdf

EDITION 11/08 - English

®

01

GENERAL INDEX

GENERAL INDEX 01

COMPANY INTRODUCTION 02

UNIVER DOORS EI2 30 – EI2 60 – REI 60 – REI 120 04 – 29

PROGET DOORS MULTIPURPOSE – REI 60 – REI 120 30 – 89

MULTIPURPOSE DOORS REVER 90 – 96

HINGED DOORS - VERTICAL SLIDING DOORS - SLIDING DOORS – REI 120 – REI 180 98 – 115

GLAZED DOORS – GLAZED FIXED WINDOWS – REI 30 – REI 60 – REI 90 – REI 120 116 – 146

PAGE

Ninz company maintains the right to introduce technical modifications any time without notice.All dimensions expressed in mm.

®

02

COMPANY INTRODUCTION

NINZ FIREDOORS have been enga-ged in the manufacturing and saleof firedoors for both domestic andinternational markets since 1976. Par-ticular attention is paid to respectingall norms currently in force. The com-bination of the company’s researchprogramme and continuous fire-resistance tests in the testing ovensensures the consistently high qualitystandard of the products.

The NINZ certificates conform to thenew UNI 9723 standard.

The wide product range and aboveall the large dimensions of the testmodels, combine to give enormousdesign flexibility within the size limitsimposed by the UNI 9723 norm.

The great flexibility of the machineryand of the computer-controlledequipment allow for the speedymanufacturing of REI 60 and REI 120firedoors as well as multipurposedoors in both single-leaf and double-leaf versions. Many doors are avai-lable in standard sizes or special sizes,with a considerable colour range tochoose from. All manufacturing pro-cesses, from the initial cutting of thesheet metal, to the painting and at-tention to the most minute details,are carried out in the facilities locatedin Bolzano (BZ) and Ala (TN).

®

03

®

04

UNIVER DOORS

EI2 30 - EI2 60

REI 60 - REI 120


Fire break doors are normally installed to compartmentalize the inside of buildings and are built forthat purpose.

UNIVER DOORS INDEX

UNIVER DOORS INDEX 04

ILLUSTRATIONS – UNIVER DOORS 05-06

MODELS/CERTIFICATES – UNIVER SINGLE-LEAF DOORS EI2 30 07

MODELS/CERTIFICATES – UNIVER SINGLE-LEAF DOORS EI2 60 07

MODELS/CERTIFICATES – UNIVER DOUBLE-LEAF DOORS EI2 60 08

MODELS/CERTIFICATES – UNIVER SINGLE-LEAF DOORS REI 60 09

MODELS/CERTIFICATES – UNIVER DOUBLE-LEAF DOORS REI 60 10

MODELS/CERTIFICATES – UNIVER SINGLE-LEAF DOORS REI 120 11

MODELS/CERTIFICATES – UNIVER DOUBLE-LEAF DOORS REI 120 12

SPECIFICATIONS/SECTIONS – UNIVER EI2 30 SINGLE-LEAF DOORS 14

SPECIFICATIONS/SECTIONS – UNIVER EI2 60 SINGLE-LEAF DOORS 15

SPECIFICATIONS/SECTIONS – UNIVER EI2 60 DOUBLE-LEAF DOORS 16

SPECIFICATIONS/SECTIONS – UNIVER REI 60 SINGLE-LEAF DOORS 17

SPECIFICATIONS/SECTIONS – UNIVER REI 60 DOUBLE-LEAF DOORS 18

SPECIFICATIONS/SECTIONS – UNIVER REI 120 SINGLE-LEAF DOORS 19

SPECIFICATIONS/SECTIONS – UNIVER REI 120 DOUBLE-LEAF DOORS 20

DIMENSIONS – UNIVER SINGLE-LEAF DOORS 21-22

DIMENSIONS – UNIVER DOUBLE-LEAF DOORS 23-24

POSITIONS OF BRACKETS/ENCUMBRANCES – UNIVER DOORS 25

ENCUMBRANCES/GLASS PANELS – UNIVER DOORS 26

ACCESSORIES – UNIVER DOORS 27-28

SURFACE FINISHING – UNIVER DOORS 29

PAGE

®

• Versions EI2 30 singleleaf doors

• Versions EI2 60 / SM / C5 single and double-leaf doors

• Versions REI 60 / REI 120 single anddouble-leaf doors

• Reversible SX or DX

• Immediate delivery from stock

• Fix with anchors or expansion screws

• Adjustable hinges

• With or without bottom frame

• Frame including cover profile also on the traverse

• Preparation for fittings

05

ILLUSTRATIONS Univer doors

• Versions EI2 30 singleleaf doors

• Versions EI2 60 / SM / C5 single and double-leaf doors

• Versions REI 60 / REI 120 single anddouble-leaf doors

• Reversible SX or DX

• Immediate delivery from stock

• Fix with anchors or expansion screws

• Adjustable hinges

• With or without bottom frame

• Frame including cover profile also on the traverse

• Preparation for fittings

Opening left (SX)double-leaf door

Opening right (DX)single-leaf door

Opening right (DX)double-leaf door

Main

leaf

Secondaryleaf

Opening left (SX)single-leaf door

Mainleaf

Secondary

leaf

®

06

ILLUSTRATIONSUniver doors

Removable cover profile to be laid on a finished floor. Brackets to fix with mortar. Preparation for fixing with expansion screws.

Black safety handle set steel core. Packed individually in nylon on pallets.

Hinge with self-closing spring. Ball-bearing hinge with screws for the vertical adjustment.

Bottom-part frame, removable. Without frame at floor.

®

07

MODELS/CERTIFICATES

Univer EI2 30 single-leaf doors

Versions Wall openingCertificates /Government approval

Notes /Glass panel dimensions

Univer EI2 60 single-leaf doors



EI2 30

CSI1250FR(UNI EN 1634)

with BRACKETS

EI2 60

IFT 27132191IFT 27132192

EI2 60

IFT 27132191IFT 27132192

b

a

L = 250H = 400

a minimum 250b minimum 300

EI2 60

IFT 27132191IFT 27132192

b

a

L = 1800 - 1150H = 1780 - 2150

L = 540 - 1150H = 1780 - 2150

L = 1750 - 1150H = 1780 - 2150

L = 1800 - 1150H = 1780 - 2150

with BRACKETS orEXPANSION SCREWS


L = 300H = 400



diam. = 300diam. = 400



EI2 60

IFT 27132191IFT 27132192

L = 1740 - 1150H = 1780 - 2150

Ø300

L = 1840 - 1150H = 1780 - 2150

Ø400

ba

®

08

MODELS/CERTIFICATES

Univer EI2 60 double-leaf doors



EI2 60

IFT 27132706IFT 27132707

b

a

b

* = mainleaf

*

a

EI2 60

IFT 27132706IFT 27132707

b

a

b

a

*

* = mainleaf

bb

a

*

* = mainleaf

EI2 60

IFT 27132706IFT 27132707

EI2 60

IFT 27132706IFT 27132707

EI2 60

IFT 27132706IFT 27132707

EI2 60

IFT 27132706IFT 27132707

EI2 60

IFT 27132706IFT 27132707

a

L = 1700 (L1 850 + L2 850)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1350 (L1 850 + L2 500)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1800 (L1 900 + L2 900)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1400 (L1 900 + L2 500)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1000 (L1 500 + L2 500)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150


L = 250H = 400



L = 250H = 400



L = 300H = 400



L = 300H = 400



diam. = 300diam. = 400



diam. = 300diam. = 400



L = 1480 (L1 1740 + L2 1740) -

H = 1780 - 2150

Ø300

H = 1780 - 2150

Ø400

L = 2000 (L1 1000 + L2 1000) -

L = 1680 (L1 840 + L2 840) -

L = 1240 (L1 1740 + L2 1500) -

H = 1780 - 2150

Ø300

Ø400

L = 2000 (L1 1000 + L2 1000) -

L = 1340 (L1 1840 + L2 1500) -

H = 1780 - 2150L = 2000 (L1 1000 + L2 1000) -

®

09

MODELS/CERTIFICATES

Univer REI 60 single-leaf doors



REI 60

I.G.117935/1812RFI.G.117936/1813RF

BZ050REI060P022F2

L = 540 - 1000H = 1780 - 2150

REI 60

CSI0750RFCSI0751RF

BZ050REI060P024F2

REI 60

CSI1181FR

BZ050REI060P028E1

b

a

REI 60

CSI1181FR

BZ050REI060P028E1

with EXPANSION SCREWS

b

REI 60

CSI1181FR

BZ050REI060P028E1


a

b

a

L = 1145 - 1350H = 1938 - 2150

L = 850 - 1020H = 1780 - 2150

L = 740 - 1020H = 1780 - 2150

L = 900 - 1167H = 1938 - 2150




L = 856 - 1144H = 1938 - 2150

L = 250

H = 400

a minimum 300

b minimum 300

L = 300

H = 400

a minimum 300

b minimum 300

diam. = 300

a minimum 220

b minimum 300

L = 880 - 1167H = 1938 - 2150

L = 880 - 1167H = 1938 - 2150

®

10

MODELS/CERTIFICATES

Univer REI 60 double-leaf doors



REI 60

CSI1181FR

BZ050REI060P028E1

b

a

b

* = mainleaf

*

aREI 60

CSI1181FR

BZ050REI060P028E1

b

a

b

a

*

* = mainleaf

bb

a

*

* = mainleaf

REI 60

CSI1181FR

BZ050REI060P028E1

REI 60

CSI1181FR

BZ050REI060P028E1

REI 60

CSI1181FR

BZ050REI060P028E1

REI 60

CSI1181FR

BZ050REI060P028E1

L = 1700 (L1 850 + L2 850)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1250 (L1 850 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1800 (L1 900 + L2 900)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1300 (L1 900 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1480 (L1 740 + L2 740)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150






L = 1140 (L1 740 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150


REI 60

CSI1181FR

BZ050REI060P028E1

with EXPANSION SCREWSL = 940 (L1 540 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

a

L = 250

H = 400

a minimum 300

b minimum 300

L = 250

H = 400

a minimum 300

b minimum 300

L = 300

H = 400

a minimum 300

b minimum 300

L = 300

H = 400

a minimum 300

b minimum 300

diam. = 300

diam. = 300

a minimum 220

b minimum 300

a minimum 220

b minimum 300

®

11

MODELS/CERTIFICATES

Univer REI 120 single-leaf doors






REI 120

CSI0735RFCSI0739RF

BZ050REI120P023F2

REI 120

CSI0740RFCSI0741RF

BZ050REI120P021F2

REI 120

CSI1211FR

BZ050REI120P030F1

REI 120

CSI1211FR

BZ050REI120P030F1


REI 120

CSI1211FR

BZ050REI120P030F1

L = 540 - 1000H = 1780 - 2150

b

a

b

a

b

a

L = 1145 - 1350H = 1938 - 2150

L = 850 - 1020H = 1780 - 2150

L = 900 - 1167H = 1938 - 2150

with EXPANSION SCREWSL = 740 - 1020H = 1780 - 2150

L = 250

H = 400

a minimum 300

b minimum 300

L = 300

H = 400

a minimum 300

b minimum 300

L = 856 - 1144H = 1938 - 2150

L = 880 - 1167H = 1938 - 2150

diam. = 300

a minimum 220

b minimum 300

L = 880 - 1167H = 1938 - 2150

®

12

MODELS/CERTIFICATES

Univer REI 120 double-leaf doors



REI 120

CSI1211FR

BZ050REI120P030F1

b

a

b

* = mainleaf

*

aREI 120

CSI1211FR

BZ050REI120P030F1

b

aREI 120

CSI1211FR

BZ050REI120P030F1

REI 120

CSI1211FR

BZ050REI120P030F1





b

*

* = mainleaf

REI 120

CSI1211FR

BZ050REI120P030F1


L = 1700 (L1 850 + L2 850)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1250 (L1 850 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1800 (L1 900 + L2 900)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 1300 (L1 900 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

L = 940 (L1 540 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150

b

a

*

* = mainleaf

REI 120

CSI1211FR

BZ050REI120P030F1

REI 120

CSI1211FR

BZ050REI120P030F1

b

a

L = 1480 (L1 740 + L2 740)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150


L = 1140 (L1 740 + L2 400)- 2000 (L1 1000 + L2 1000)

H = 1780 - 2150


a

L = 250

H = 400

a minimum 300

b minimum 300

L = 250

H = 400

a minimum 300

b minimum 300

L = 300

H = 400

a minimum 300

b minimum 300

L = 300

H = 400

a minimum 300

b minimum 300

diam. = 300

diam. = 300

a minimum 220

b minimum 300

a minimum 220

b minimum 300

®

13

®

14

SPECIFICATIONS/SECTIONSUniver EI2 30 single-leaf doors

Vertical sections

32FFL+

15+

5

Net

pass

age=

FM

H -

40

Wall

open

ing=

(FM

H)

Exte

rnal f

ram

e= F

M H

+ 1

3

10

Horizontal sections

33

53

55

+20+10

appr

ox. F

M H

/2 +

50

Univer EI2 30 single-leaf doors (UNI EN 1634):❏ Galvanized steel-sheet reversible door leaf with insulating-

material core, total thickness 50 mm.❏ Assembled corner reversible frame, with or without bottom frame,

made of galvanized steel-sheet profile, with brackets to be setinto wall.

❏ Reversible opening pull right (DX) or left (SX) for standard,semistandard and to order door version.

❏ Full lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder

bore and keyholes for patent keys.❏ 2 hinges: one hinge with self-closing spring, one ball-bearing hinge

with screws for the vertical adjustment.❏ Strengthening plates inside door leaf for fastening door closer and

emergency handle if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-

scratch beaten finish - light pastel turquoise for door leaf (NCS4020-B50G), and a darker shade for the frame (NCS5020-B50G). Byrequest, powder coating in RAL or decorative NDD – Ninz DigitalDecor can be applied for decorative or graphic elements. Surfacetreatment of the door leaf is carried out using oven-baked epoxy-polyester powder and graphic printing of the decoration on theflat side of the door leaf by means of sprayed inks. The decorationis protected by transparent varnish. The finishing can be smoothor embossed in accordance with the decoration selected.

❏ Maximum dimensions: 1150 x 2150.❏ Weight approx. 29 kg/m2 metre wall opening.

N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on

the page on “surface finishing”.- For door repainting follow instructions on page “surface treatment”.- FFL = Finished floor level.

Wall opening (FM L)

External frame = FM L + 32

Net passage = FM L - 74

®

15

SPECIFICATIONS/SECTIONSUniver EI2 60 single-leaf doors

+15

+5

Univer EI2 60 single-leaf doors (UNI EN 1634):❏ Galvanized steel-sheet reversible door leaf with insulating-

material core, total thickness 60 mm.❏ Assembled corner reversible frame, with or without bottom frame, made

of galvanized steel-sheet profile, with brackets to be set into wall andpreparation for fixing with expansion screws.

❏ Reversible opening pull right (DX) or left (SX) for standard, semistandard andto order door version.

❏ Full lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and

keyholes for patent keys.❏ 2 hinges: one hinge with self-closing spring, one ball-bearing hinge with

screws for the vertical adjustment.❏ Strengthening plates inside door leaf for fastening door closer and

emergency handle if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ On request the door can also be supplied as an EI2 60-Sm smoke control

door in accordance with standard EN 1634-1 and EN 1634-3. In this casethe door comes fitted with a rubber seal FF /CR, an anodised automatic sillseals and a strike seal fitted to the central post.

❏ Fitted with door closer CP1 or CP 2 the door can be classified C.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaf (NCS4020-B50G), anda darker shade for the frame (NCS5020-B50G). By request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leaf iscarried out using oven-baked epoxy-polyester powder and graphic printingof the decoration on the flat side of the door leaf by means of sprayedinks. The decoration is protected by transparent varnish. The finishing canbe smooth or embossed in accordance with the decoration selected.

❏ Maximum dimensions: 1150 x 2150.❏ Weight approx. 35 kg/m2 wall opening.

N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page

on “surface finishing”.- For door repainting follow instructions on page “surface treatment”.- FFL = Finished floor level.

appr

ox. F

M H

/2 +

50

Vertical sections

32FFL

Wall

open

ing =

(FM

H)

Exte

rnal f

ram

e =

FM

H +

13

Net

pass

age

= F

M H

- 4

0

+20+10Wall opening (FM L)


10

65

33

53 Horizontal sections


®

16

SPECIFICATIONS/SECTIONSUniver EI2 60 double-leaf doors

+15

+5

Univer EI2 60 double-leaf doors (UNI EN 1634):❏ Galvanized steel-sheet reversible door leaf with insulating-material core, total

thickness 60 mm.❏ Corner reversible frame, with or without bottom frame, made of galvanized

steel-sheet profile, with brackets to be set into wall and preparation for fixingwith expansion screws. The frame is supplied non-assembled.

❏ Reversible opening pull right (DX), transformable in pull left (SX) for standard,semistandard and to order door version.

❏ Full lock in main leaf with cylinder bore and plastic keyhole for patent key, included.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Milled slot for the automatic blocking lock on the secondary door leaf prepared

for the application of panic hardware.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes

for patent keys.❏ 4 hinges, one per leaf with spring for the self-closing and one per leaf ball-

bearing with screws for the vertical adjustment.❏ Locking regulator to guarantee the correct locking sequence.❏ Strengthening plates inside door leaf for fastening door closer and emergency

handle if required.❏ Floor catch to be fitted by means of screws/plugs onto the finished floor.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ On request the door can also be supplied as an EI2 60-Sm smoke control door

in accordance with standard EN 1634-1 and EN 1634-3. In this case the doorcomes fitted with a rubber seal FF /CR, two anodised automatic sill seals and astrike seal fitted to the central post.

❏ Fitted with two door closers CP1 or CP2 the door can be classified C5.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten

finish - light pastel turquoise for door leaves (NCS4020-B50G), and a darkershade for the frame (NCS5020-B50G). By request, powder coating in RAL ordecorative NDD – Ninz Digital Decor can be applied for decorative or graphicelements. Surface treatment of the door leaves is carried out using oven-bakedepoxy-polyester powder and graphic printing of the decoration on the flat sideof the door leaves by means of sprayed inks. The decoration is protected bytransparent varnish. The finishing can be smooth or embossed in accordance withthe decoration selected.

❏ Maximum dimensions: 2000 x 2150 mm.❏ Weight approx. 35 kg/m2 wall opening.N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on

“surface finishing”.- For door repainting follow instructions on page “surface treatment”.- FFL = Finished floor level.

+20+10

appr

ox. F

M H

/2 +

50

Vertical sections

32FFL

Wall

open

ing =

(FM

H)

Exte

rnal f

ram

e =

FM

H +

13

Net

pass

age

= F

M H

- 4

0

Horizontal sections

External frame = FM L +26

Net passage = FM L -80

53

Wall opening (FM L)

10

33

Net passage main leaf = L1 -75

L2 L1

if necessary,floor catch set

65

®

17

SPECIFICATIONS/SECTIONS Univer REI 60 single-leaf doors

Univer REI 60 single-leaf doors:❏ Galvanized steel-sheet reversible door leaf with insulating-material

core, total thickness 50 mm.❏ Assembled corner reversible frame, with or without bottom frame, made


❏ Reversible opening pull right (DX) or left (SX) for standard, semistandardand to order door version.




emergency handle if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaf (NCS4020-B50G), anda darker shade for the frame (NCS5020-B50G). By request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leaf iscarried out using oven-baked epoxy-polyester powder and graphic printingof the decoration on the flat side of the door leaf by means of sprayedinks. The decoration is protected by transparent varnish. The finishingcan be smooth or embossed in accordance with the decoration selected.

❏ Maximum dimensions: 1350 x 2150 mm.❏ Weight approx. 33 kg/m2 wall opening.



appr

ox. F

M H

/2 +

50

Vertical sections

32FFLN

et p

ass

age

= F

M H

- 4

0

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

13

+15

+5

10

Horizontal sections

33

53

Wall opening (FM L)



55

+20+10

®

18

SPECIFICATIONS/SECTIONS Univer REI 60 double-leaf doors

Univer REI 60 double-leaf doors:❏ Galvanized steel-sheet reversible door leaf with insulating-material

core, total thickness 50 mm.❏ Corner reversible frame, with or without bottom frame, made of galvanized

steel-sheet profile, including preparation for plugs. The frame is suppliednon-assembled.


❏ Full lock in main leaf with cylinder bore and plastic keyhole for patent key,included.

❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Milled slot for the automatic blocking lock on the secondary door leaf

prepared for the application of panic hardware.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and

keyholes for patent keys.❏ 4 hinges, one per leaf with spring for the self-closing and one per leaf

ball-bearing with screws for the vertical adjustment.❏ Locking regulator to guarantee the correct locking sequence.❏ Strengthening plates inside door leaf for fastening door closer and

emergency handle if required.❏ Floor catch to be fitted by means of screws/plugs onto the finished floor.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaves (NCS4020-B50G),and a darker shade for the frame (NCS5020-B50G). By request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leavesis carried out using oven-baked epoxy-polyester powder and graphicprinting of the decoration on the flat side of the door leaves by meansof sprayed inks. The decoration is protected by transparent varnish. The finishingcan be smooth or embossed in accordance with the decoration selected.

❏ Maximum dimensions: 2000 x 2150 mm.❏ Weight approx. 33 kg/m2 wall opening.N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on


appr

ox. F

M H

/2 +

50

+15

+5

Vertical sections

32FFLN

et p

ass

age

= F

M H

- 4

0

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

13

+20+10Wall opening (FM L)

Horizontal sections

53



55

10

33


L2 L1

if necessary, floor catch set

®

19

SPECIFICATIONS/SECTIONSUniver REI 120 single-leaf doors

Univer REI 120 single-leaf doors:❏ Galvanized steel-sheet reversible door leaf with insulating-material

core, total thickness 60 mm.❏ Assembled corner reversible frame, with or without bottom frame, made


❏ Reversible opening pull right (DX) or left (SX) for standard, semistandardand to order door version.




emergency handle if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaf (NCS4020-B50G), anda darker shade for the frame (NCS5020-B50G). By request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leaf iscarried out using oven-baked epoxy-polyester powder and graphic printingof the decoration on the flat side of the door leaf by means of sprayedinks. The decoration is protected by transparent varnish. The finishingcan be smooth or embossed in accordance with the decoration selected.




appr

ox. F

M H

/2 +

50

+5

+20+10

+15

Horizontal sections

33

Wall opening (FM L)



53

65

10

Vertical sections

32FFL

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

13

Net

pass

age

= F

M H

- 4

0

®

20

SPECIFICATIONS/SECTIONSUniver REI 120 double-leaf doors

Univer REI 120 double-leaf doors:❏ Galvanized steel-sheet reversible door leaf with insulating-material

core, total thickness 60 mm.❏ Corner reversible frame, with or without bottom frame, made of

galvanized steel-sheet profile, including preparation for plugs. The frame issupplied non-assembled.


❏ Full lock in main leaf with cylinder bore and plastic keyhole for patent key,included.

❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Secondary leaf with internal upper and lower closing rod with central manual

control and prepared to receive the anti-panic kit.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and

keyholes for patent keys.❏ 4 hinges, one per leaf with spring for the self-closing and one per leaf

ball-bearing with screws for the vertical adjustment.❏ Closing regulator to guarantee the correct closing sequence.❏ Strengthening plates inside door leaf for fastening door closer and emergency

handle if required.❏ Floor catch to be fitted by means of screws/plugs onto the finished floor.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaves (NCS4020-B50G),and a darker shade for the frame (NCS5020-B50G). By request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leavesis carried out using oven-baked epoxy-polyester powder and graphicprinting of the decoration on the flat side of the door leaves by meansof sprayed inks. The decoration is protected by transparent varnish. The finishingcan be smooth or embossed in accordance with the decoration selected.


N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on


appr

ox. F

M H

/2 +

50

+5

+20+10

+15

Vertical sections

32FFL

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

13

Net

pass

age

= F

M H

- 4

0

Wall opening (FM L)

Horizontal sections


Net passage = FM L -80

53

65

10

33


L2 L1

if necessary, floor catch set

®

21

DIMENSIONS Univer single-leaf doors

+20+10 +15

+ 5

Dimensions for EI2 30 and EI2 60doors only.

Dimensions for REI 60 and REI 120doors only.

+20+10

+15+ 5

NET PASSAGE EXTERNAL FRAME

Single-leaf SEMISTANDARD doors reversible

width

min. max.

WALL OPENING

height height heightwidth width

min.max. max.min.

1000

205020502050

726 2010 832 2063

21502150

726826

2110 832932

21632110

2110

2163

2163

800900

800900

826926

20102010

9321032

20632063

1350 2150 1276 1382

2110 21631000 2150 926 1032

540 572466

805

905

731

831

837

937

795

895

995

2050

2050

2050

721

821

921

2010

2010

2010

827

927

1027

2063

2063

2063

2150

21502150

2110

21102110

2163

21632163

1005

11451205

1140

11951340

931

10711131

1066

11211266

1037

11771237

1182

12271372

1350 2050 1276 2010 1382 20631200 2050 1126 2010 1232 2063

1200 2150 1126 2110 1232 2163

height width height

Single-leaf STANDARD doors reversibleWALL OPENING NET PASSAGE EXTERNAL FRAME

heightwidth width

1005 1037931

1005

1145

931

1071

1037

1177

1150

1140

1195

2050

2050

2050

1076

1066

1121

2010

2010

2010

1182

1172

1227

2063

2063

2063

1131 12372050 1266 2010 1372 20631205 1340

540 572466

805

905

731

831

837

937

795

895

995

2150

2150

2150

721

821

921

2110

2110

2110

827

927

1027

2163

2163

2163

931 10372150 1076 2010 1182 21631005 1150

Specify the opening direction of the following one leaf doors:• all doors with window apertures• all doors featuring electro handles ELM• all doors featuring non-standard locks.

The customer must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of 2000 mm.(=wall opening 2040 mm).

The dimensions of doors are limited according to the specifications on the page “models/certificates”.

22

®DIMENSIONSUniver single-leaf doors

NET PASSAGE

max.

REI 60 and REI 120 - single-leaf doors reversible TO ORDER

heightwidth

WALL OPENING

min. max. min.heightwidth

min. max. max.min.

EXTERNAL FRAME

width heightmax.min. max.min.

NET PASSAGE

max.

EI2 30 and EI2 60-single-leaf doors reversible TO ORDER

heightwidth

WALL OPENING

min. max. min.heightwidth

min. max. max.min.

EXTERNAL FRAME

width heightmax.min. max.min.

1780 572 17932150 2110 2163466540 1150 1076 1740 1182

+20+10

+15+5

1780 572 17932150 2110 2163466540 1350 1276 1740 1382

+20+10

+15+5

23

®DIMENSIONS

Univer double-leaf doors

Dimensions for EI2 60doors only.

Dimensions for REI 60 and REI 120doors only.

width heightwidth

LEAF DIVISION

main L1 second. L2total main

WALL OPENING NET PASSAGE EXTERNAL FRAME

height heightwidth

Double-leaf STANDARD doors reversible

1150 2050 400 1070 675 2010 1176 2063

1200 500 1120 625 2010 1226

1400 400 1320 925 1426

1500 750 1420 675 1526

1700 800 1620 825 1726

750

700

1000

750

900

2050

2050

2050

2050

2010

2010

2010

2063

2063

2063

2063

1200 400 1120 725 12268002050 2010 20631250 450 1170 725 12768002050 2010 2063

1300 500 1220 725 13268002050 2010 2063

1400 500 1320 825 14269002050 2010 2063

1350 450 1270 825 13769002050 2010 2063

1450 450 1370 925 147610002050 2010 2063

1600 800 1520 725 16268002050 2010 2063

1200 600 1120 525 2010 12266002050 2063

1300 650 1220 575 13266502050 2010 2063

1300 400 1220 825 13269002050 2010 2063

1400 700 1320 625 14267002050 2010 2063

2150 2110 2163

21502150

21502150

21502150

215021502150

21102110

21102110

21102110

211021102110

21632163

21632163

21632163

216321632163

2150 2110 21632150 2110 2163

2150 2110 2163

2150 2110 2163

2150 2110 2163

2150 2110 2163

+20+10

+15+5

1800 900 1720 825 18269002050 2010 20631900 900 1820 925 192610002050 2010 20632000 1000 1920 925 202610002050 2010 2063

2150 2110 21632150 2110 21632150 2110 2163

1150

1200

1400

1500

1700

12001250

1300

1400

1350

1450

1600

1200

1300

1300

1400

180019002000

750

700

1000

750

900

800800

800

900

900

1000

800

600

650

900

700

90010001000

400

500

400

750

800

400450

500

500

450

450

800

600

650

400

700

9009001000

1070

1120

1320

1420

1620

11201170

1220

1320

1270

1370

1520

1120

1220

1220

1320

172018201920

675

625

925

675

825

725725

725

825

825

925

725

525

575

825

625

825925925

1176

1226

1426

1526

1726

12261276

1326

1426

1376

1476

1626

1226

1326

1326

1426

182619262026

24

®DIMENSIONSUniver double-leaf doors

Specify the opening direction of the following two leaf doors:• all doors featuring anti panic bar on the secondary leaf• all doors featuring window apertures• all doors featuring the electro handle ELM• all doors featuring non-standard locks.

Standard, semistandard and to order two leaf doors not included in the above list, where notspecifically requested by the customer, are supplied with pull opening direction right DX.

The customer must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of 2000 mm.(=wall opening 2040 mm).


heightwidth

WALL OPENING LEAF DIVISION NET PASSAGE

min. max. min. min.max. max. min. max.height

total widthmain L1 secondary L2

Double-leaf SEMISTANDARD doors reversible

LEAF DIVISION

max.

El2 60 - double - leaf doors reversible TO ORDER

heightwidth

WALL OPENING

min. max. min.secondary L2main L1

min. max. max.min.

NET PASSAGE

total width heightmax.min. max.min.

LEAF DIVISION

max.

REI 60 and REI 120 - double - leaf doors reversible TO ORDER

heightwidth

WALL OPENING

min. max. min.secondary L2main L1

min. max. max.min.

NET PASSAGE

total width heightmax.min. max.min.

1780 920 17402150 1000 21105001000 2000 1000 500 1920

+20+10

+15+5

940 8602000 540 1000 400 1000 1920 20102050

940 8602000 540 1000 400 1000 1920 21102150

+20+10 +15

+5

1000 9202000 500 1000 500 1000 1920 20102050

1000 9202000 500 1000 500 1000 1920 21102150

1780 860 17402150 1000 2110540940 2000 1000 400 1920

+20+10

+15+5

®

25

POSITIONS OF BRACKETS/ENCUMBRANCES Univer doors

+37FM L2

FM H

2 FM H

2

Wall opening (FM L)

80

200

-97

Wall

openin

g (FM

H) 342

334

+33

Single-leaf door opening right DX

FFL

+37FM L2

FM H 2 FM H 2

Wall opening (FM L)

80

200

-41

Wall

openin

g (FM

H) 342

334

+89

FFL

Single-leaf door opening left SX

Wall opening (FM L)

80

200

-41

334

342

+33

Wall

openin

g (FM

H)

FM H

2 FM H 2

FFL

Wall opening (FM L)

80

200

-41

334

342

+33

Wall

openin

g (FM

H)

FM H 2

FM H

2FFL

B

A

40

37

Wall opening (FM L)

X

Z17

5

20

X = FM L +29Z = FM L -198A TW = 110A SL = 75A TX = 130A TB = 74B REI120 = 74B REI60 = 64B EI2 60 = 74B EI2 30 = 64Height of handlesee page”Specifications/Sections”

37

Wall opening (FM L)

Z175

30

X

X = FM L +4Z = FM L -223Height of handle see page ”Specifications/Sections”Door with CP2 not openable to 180°

280 80

10

Double-leaf door opening right DX Double-leaf door opening left SX

Maximum dimensions for single-leaf doors opening 90° Maximum dimensions for single-leaf doors opening 180°

L2-232 L2-232 L2-232 L2-232

®

26

ENCUMBRANCES/GLASS PANELSUniver doors

Maximum dimensions for double-leaf doors opening to 90°

X = L1 +35Y = L2 +64Z = L1 -198A TW = 110A SL = 75A TX = 130A TB = 74

Maximum dimensions for double-leaf doors opening to 180°

Z175

30

X

Wall opening (FM L)

L1 L2

Y

280

10

8040

B REI120 = 77B REI60 = 67B EI2 60 = 77Height of handle seepage ”Specifications/Sections”

X = L1 +5Y = L2 +34Z = L1 -223Height of handle see page ”Specifications/Sections”Door with CP2 or RC2 not openable 180°

A20

Z17

5

4040

B

X

L1 L2

Wall opening (FM L)

Y

Horizontal section

of rectangularwindowwith EI2 60 glass

Horizontal section

of rectangularwindowwith REI 60 glass

Horizontal section

of rectangularwindowwith REI 120 glass

Horizontal section

of circularwindowwith EI2 60 glass

Horizontal section

of circularwindowwith REI 60 glass

Horizontal section

of circularwindowwith REI 120 glass

50

15

Edge Glass dim. LxH

50

15

Edge Glass dim. LxH

50

15

Edge Glass dim. LxH

60 50

60

53.5

60

16.5

Edge Glass dim. Ø

53.5

50

16.5

Edge Glass dim. Ø

53.5

16.5

Edge Glass dim. Ø

60

Glass panelØ300Ø400

FM H 2150 A = 1600 (Ø300)

Glass PanelL 250 x H 400L 300 x H 400 m

in.

Wal

l ope

ning

(FM

H) m

in.2

050

300

min

.

Wal

l ope

ning

(FM

H) m

in.2

050

A

Ø G

lass

300

(FM L/L1/L2)

(FM L/L1/L2)

REI 60 / 120

REI 60 / 120

1350

FM H

205

0-21

49

1450

FM H

215

0

FM L / L1 / L2 min. 900

FM L / L1 / L2 min. 850

El2 60

El2 60

L 300 x H 400

L 250 x H 400

FM L min. 800

FM L min. 750 L1 / L2 min. 850

L1 / L2 min. 900

L 300 x H 400

L 250 x H 400

A = 1600 (Ø400)

FM H = 2050-2149 A = 1600 (Ø300) A = 1550 (Ø400)

REI 60 / 120 Ø300 FM L / L1 / L2 min. 740

El2 60 Ø400 FM L / L1 / L2 min. 840

El2 60 Ø300 FM L / L1 / L2 min. 740

®

27

ACCESSORIES Univer doors

FF black weather stripping to beinserted into the special channelprovided on the frame. Suppliedonly on request and in loose rollsfor cutting and fitting on site.

Glass holders IM in galvanizedsteel (thickness 1.5 mm). Thermallypowder coated in pastel turquoiseor RAL on request. To be fixed withscrews and plugs. Delivery uponrequest and does not includescrews/expansion screws. Holesare not prepared.

All doors are supplied without CILcylinders. These are supplied onlyon request or together with emer-gency handles. Each cylinder comeswith 3 keys, either with its ownindividual number or as part of asystem with master key.

Overhead door closer CP1 withflat form arm, lateral regulation ofclosing speed and back check. Fi-nish silver. Adjustable closing force3 to 4.

Panic hardware Twist, Taurus-stainless steel and Slash withinternal locking, two control boxesand bar.The panic hardware handles aresupplied unassembled.The external cover plate is suppliedof series with the Slash-panic hard-ware for single-leaf doors and formain-leafs on double-leaf doors.The various types are listed on thepage for “accessories / antipanichandles” in the chapter on PROGET.

TWIST (TW) SLASH (SL)

Holes-cover plate

TAURUS INOX (TX)

73

51

200

210

38 33

approx. 290

L= 35 mm for leafwith thickness 50 mm

L= 40 mm for leafwith thickness 60 mm

L L L 10

®

28

ACCESSORIESUniver doors

Fire resistant doors prepared forthe application of handle M14 orfor bar Twist and Slash type A aresupplied with a carrier arm (notfitted) to permit application of thedoor closer regulator by pushingonly the secondary door leaf.

Door closer regulator RC/STD fortwo leaf doors Univer in itscomponent parts not fitted, to befitted on the bracket included indelivery.

Horizontal sectionsCarrier arm

Secondary leaf Main leaf

*........Opening angle regolable

Vertical sections

Support withclosing regulator

90°

*

®

29

SURFACE FINISHINGUniver doors

Doors are supplied with paint finishfor indoor use. For repainting proceedas follows:- sand and dust off the surfaces

thoroughly- apply a base coat of opaque beige

0059(made by ALCEA of Milan) 2-component epoxy paint EPOX 5203

- repaint the surfaces with the enamelor paint desired.

The door must not be ex-posed to atmospheric agentsand direct sunlight.

Other RAL tones upon request: RAL1001-RAL1007-RAL1014-RAL1021-RAL1023-RAL1033-RAL2010-RAL3003-RAL3004-RAL3009-RAL3011-RAL3020-RAL5000-RAL5002-RAL5003-RAL5005-RAL5007-RAL5008-RAL5009-RAL5011-RAL5012-RAL5013-RAL5014-RAL5015-RAL5017-RAL6011-RAL6012-RAL6016-RAL6018-RAL6019-RAL6028-RAL6029-RAL7001-RAL7004-RAL7011-RAL7016-RAL7022-RAL7030-RAL7032-RAL7036-RAL7037-RAL7040-RAL7042-RAL7046-RAL7047-RAL8014-RAL8017-RAL8019-RAL8023-RAL9005

RAL tones for outside use: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010-RAL5011-RAL5014-RAL6000-RAL6005-RAL6018-RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036-RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020

For the cleaning of our products we recommend the use of water and neutral soap. Do not usecleaning fluids or other solvents. We do not accept responsibility for future complaints should theserecommendations not be adhered to.

(For printing reasons the colours might not be like the original ones)

RAL

1013

RAL

900

1

RAL

900

2

RAL

901

8

RAL

1003

RAL

1015

RAL

300

0

RAL

501

0

RAL

600

0

RAL

600

5

RAL

7024

RAL

7035

RAL

703

8

RAL

801

1

RAL

901

1

RAL

502

4

RAL

901

0

List of RAL tones at stock

®

30

PROGET DOORS

MULTIPURPOSE

REI 60 - REI 120

®

31

®

PROGET DOORS INDEX 32ILLUSTRATIONS – PROGET DOORS 33-34MODELS/CERTIFICATES – PROGET REI 60 SINGLE-LEAF DOORS 35MODELS/CERTIFICATES – PROGET REI 60 DOUBLE-LEAF DOORS 36-37MODELS/CERTIFICATES – PROGET REI 120 SINGLE-LEAF DOORS 37-38MODELS/CERTIFICATES – PROGET REI 120 DOUBLE-LEAF DOORS 38-40MODELS/CERTIFICATES – PROGET REI 60 SINGLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING 40-41MODELS/CERTIFICATES – PROGET REI 60 DOUBLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING 41-42MODELS/CERTIFICATES – PROGET REI 120 SINGLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING 42MODELS/CERTIFICATES – PROGET REI 120 DOUBLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING 43MODELS/CERTIFICATES – PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD PARTITION 44MODELS/CERTIFICATES – PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD PARTITION 44MODELS/CERTIFICATES – PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD PARTTITION 45MODELS/CERTIFICATES – PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD PARTTITION 46MODELS/CERTIFICATES – PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 46MODELS/CERTIFICATES – PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 46-47MODELS/CERTIFICATES – PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 47-48MODELS/CERTIFICATES – PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 48-49SPECIFICATIONS/SECTIONS – PROGET MULTIPURPOSE SINGLE-LEAF DOORS 51SPECIFICATIONS/SECTIONS – PROGET MULTIPURPOSE DOUBLE-LEAF DOORS 52SPECIFICATIONS/SECTIONS – PROGET REI 60 AND 120 SINGLE-LEAF DOORS 53SPECIFICATIONS/SECTIONS – PROGET REI 60 AND 120 DOUBLE-LEAF DOORS 54SPECIFICATIONS/SECTIONS – PROGET REI 60 AND 120 SINGLE-LEAF DOORS ON SUB-FRAME 55SPECIFICATIONS/SECTIONS – PROGET REI 60 AND 120 DOUBLE-LEAF DOORS ON SUB-FRAME 56SPECIFICATIONS/SECTIONS – PROGET REI 60 AND 120 SINGLE-LEAF DOORS EXPANSION SCREW FIXING 57SPECIFICATIONS/SECTIONS – PROGET REI 60 AND 120 DOUBLE-LEAF DOORS EXPANSION SCREW FIXING 58SPECIFICATIONS/SECTIONS – PLASTERBOARD PARTITION - PROGET REI 60 DOORS 59-60SPECIFICATIONS/SECTIONS – PLASTERBOARD PARTITION - PROGET REI 120 DOORS 61-62SPECIFICATIONS/SECTIONS – PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME 63SPECIFICATIONS/SECTIONS – PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME 64SPECIFICATIONS/SECTIONS – PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME 65SPECIFICATIONS/SECTIONS – PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APP. WALL CLAMP FRAME 66DIMENSIONS – PROGET SINGLE-LEAF DOORS – STANDARD 67DIMENSIONS – PROGET SINGLE-LEAF DOORS – SEMISTANDARD AND TO ORDER 68DIMENSIONS – PROGET DOUBLE-LEAF DOORS – STANDARD 69DIMENSIONS – PROGET DOUBLE-LEAF DOORS – SEMISTANDARD AND TO ORDER 70POSITIONS OF BRACKETS – PROGET DOORS TO BE SET BY MORTAR 71-72ENCUMBRANCES – PROGET SINGLE-LEAF DOORS 73ENCUMBRANCES – PROGET DOUBLE-LEAF DOORS 74ACCESSORIES – HANDLES 75ACCESSORIES – EMERGENCY HANDLES 76GLASS PANELS – PROGET MULTIPURPOSE DOORS 77GLASS PANELS – PLASTIC LOUVRE – PROGET MULTIPURPOSE DOORS 78GLASS PANELS – PROGET REI 60 AND REI 120 DOORS 79SECTIONS GLASS PANELS – PROGET REI 60 AND REI 120 DOORS 80ACCESSORIES – DOOR CLOSER AND CARRIER ARM FOR PROGET DOORS 81ACCESSORIES – SEQUENCERS FOR PROGET DOORS 82ACCESSORIES – SPECIAL ACCESSORIES FOR PROGET DOORS 83FRAME EXTENSIONS/APPLICATIONS – PROGET DOORS 84SURFACE FINISHING – PROGET DOORS 85DETECTORS/ELECTROMAGNETS 86ELECTRIC HANDLE ELM 87-88SYSTEM ”CONTROLLED OPENING”/LOCK 3 CLOSING POINTS 89

32

PROGET DOORS INDEX

Ninz company maintains the right to introduce technical modifications at any time without notice.All dimensions are expressed in mm.Fire break doors are normally installed to compartmentalize the inside of buildings and for thatpurpose they are built.

PAGE

®

33

ILLUSTRATIONS

All NINZ series products are constructedusing technologies completely new to thefiredoor sector. To guarantee maximum ri-gidity, the metal sheets of the door leavesare glued to the insulating-material core. Theframe comes unassembled so as to facilitatetransportation from the factory to the instal-lation site. All door components are fullygalvanized, and a perfect, aesthetic finishresults from the use of thermo-hardenedpowder coating.All accessories and their functions are speciallyselected and studied so that all relevantnorms, in particular those regarding the self-locking mechanism of the secondary doorleaves, are adhered to.Many years of concentrated research andconstant testing in the company’s own labo-ratories have led to the creation of a me-chanically dependable and fire-proof product.

Proget doors

®

34

ILLUSTRATIONSProget doors

®

35

MODELS/CERTIFICATES

Proget REI 60 single-leaf doors

L = 546 - 900H= 1775 - 2000

L = 546 - 1000H= 1775 - 2150

L = 750 - 900H= 1775 - 2000

L = 250 - 400H= 250 - 600


a

b

L = 850 - 1000H= 1775 - 2150

REI 60CSI0420RFBZ050REI060P005F1





L = 750 - 900H= 1775 - 2000

L = 779 - 1037H= 1803 - 2197

L = 250 - 400H= 630 - 1400min. area 0,25m


L = 250 - 400H= 250 - 600


bb

a

a

b 2

VersionsCertificates /Government approval

Glass paneldimensions

Wall openingdimensions

L = 546 - 1340H= 1775 - 2670


L = 970 - 1340H= 1775 - 2670


L = 250 - 620H= 250 - 400


b

a

®

L = 1500(L1 750+L2 750)- 1800(L1 900+L2 900)H= 1775- 2000

1:L= 250- 400 H= 630-1400 min. area 0,25m2:L= 250- 400 H= 250- 600a minimum 250b minimum 300

REI 60CSI0447RFBZ050REI060P004F1L = 1538(L1 771,5+L2 766,5)-

2062(L1 1028,5+L2 1033,5)H= 1803 - 2197

L = 1100(L1 750+L2 350)- 1800(L1 900+L2 900)H= 1775 - 2000 REI 60

CSI0447RFBZ050REI060P004F1

L = 250 - 400H= 630 - 1400min. area 0,25 m


L =1538(L1 771,5+L2 766,5)- 2062(L1 1028,5+L2 1033,5)H=1803 - 2197

L = 890(L1 540+L2 350)-2540(L1 1270+L2 1270)

H= 1775-2670 REI 60CSI0621RFBZ050REI060P016F2

a

bb

2 1

*

a

bb*

36

MODELS/CERTIFICATES

Proget REI 60 double-leaf doors

L = 890(L1 540+L2 350)- 2000(L1 1000+L2 1000)H= 1775 - 2150 REI 60


L = 1700(L1 850+L2 850)- 2000(L1 1000+L2 1000)H= 1775 - 2150 REI 60


L = 250 - 400H= 250 - 600


b

a

L =1200(L1 850+L2 350)- 2000(L1 1000+L2 1000)H= 1775 - 2150 REI 60


L = 250 - 400H = 250 - 600


L =1390(L1 540+L2 850)- 2000(L1 1000+L2 1000)H= 1775 - 2150 REI 60


L = 250 - 400H= 250 - 600


b

a

b

a

*

*




* = mainleaf

* = mainleaf

* = mainleaf

* = mainleaf

2

2

®

L = 1800 (L1 900+L2 900)-2540(L1 1270+L2 1270)

H= 1775 - 2670 REI 60CSI0621RFBZ050REI060P016F2

L = 250 - 620H= 250 - 400


L = 1250 (L1 900+L2 350)- 2540(L1 1270+L2 1270)H= 1775 - 2670 REI 60


L = 250 - 620H= 250 - 400


L = 1440(L1 540+L2 900)- 2540(L1 1270+L2 1270)H= 1775 - 2670 REI 60


L = 250 - 620H= 250 - 400


a

b

b

a

*

b

a

*

37

MODELS/CERTIFICATES





* = mainleaf

* = mainleaf





L = 546 - 900H= 1775 - 2000


L = 546 - 1000H= 1775 - 2150


L = 890 - 900H= 1775 - 2000


L = 250 - 260H = 250 - 455


a

b

®

38

MODELS/CERTIFICATES

L = 970 - 1340H= 1775 - 2670


L = 250 - 620H= 250 - 400


b

a


L = 890(L1 540+L2 350)- 2000(L1 1000+L2 1000)H= 1775 - 2150 REI 120









L = 850 - 1000H= 1775 - 2150


L = 250 - 400H = 250 - 600


L = 750 - 900H= 1775 - 2000


L = 250 - 400H = 630 - 1400min.area 0,25 m


L = 779 - 1037H= 1803 - 2197b

b

a

a

b

L = 546 - 1340H= 1775 - 2670


L = 890 - 1162H= 1775 - 2620


L = 250 - 522H= 500 - 1460min.area 0,25 m


L = 997 - 1332H= 2361- 2670

b

a

2

2

®

39

MODELS/CERTIFICATES


L = 1100(L1 750+L2 350)- 1800(L1 900+L2 900)


L = 250 - 400H= 630 - 1400min. area 0,25 m


L = 1538(L1 771,5+L2 766,5)- 2062(L1 1028,5+L2 1033,5)

H= 1803 - 2197

L = 890(L1 540+L2 350)- 2540(L1 1270+L2 1270)


L = 1800(L1 900+L2 900)- 2540(L1 1270+L2 1270)


L = 250 - 620H= 250 - 400


*

a

bb

b

a

L = 1200(L1 850+L2 350)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L = 1700 (L1 850+L2 850)- 2000(L1 1000+L2 1000)H= 1775 - 2150 REI 120


L = 250 - 400H= 250 - 600


L = 1500(L1 750+L2 750)- 1800(L1 900+L2 900)

H= 1775 - 2000

1: L= 250- 400 H= 630-1400 min. area 0,25 m2: L= 250- 400 H= 250- 600a minimum 250b minimum 300

REI 120CSI0454RFBZ050REI120P006F1L = 1538(L1 771,5+L2 766,5)-

2062(L1 1028,5+L2 1033,5)H= 1803 - 2197

L = 1390(L1 540+L2 850)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


*

a

b

a

b

*

*

2 1

a

b

a

bb




* = mainleaf

* = mainleaf

* = mainleaf

2

* = mainleaf

2

®

L = 850 - 1170H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1004 - 1340H= 2050 - 2500

L = 600 - 1170H= 1775 - 2275

L = 1004 - 1340H= 2050 - 2500

b

a

40

MODELS/CERTIFICATES





L = 1250(L1 900+L2 350)- 2540(L1 1270+L2 1270)


L = 250 - 620H= 250 - 400


L = 1440(L1 540+L2 900)- 2540(L1 1270+L2 1270)


L = 250 - 620H= 250 - 400


*

*

a

b

a

b

L = 1240(L1 890+L2 350)- 2315(L1 1155+L2 1160)


L = 250 - 515H= 500 - 1460min. area 0,25 m


L = 1975(L1 989+L2 986)- 2540(L1 1268+L2 1272)

H= 2361 - 2670

L = 1900(L1 890+L2 1010)- 2315(L1 1155+L2 1160)

H= 1775 - 2620

2: L= 250- 400 H= 250- 6001: L= 250- 515 H= 500-1460 min. area 0,25 ma minimum 320b minimum 300c minimum 380

REI 120CSI0460RFBZ050REI120P007F1L = 1975(L1 989+L2 986)-

2540(L1 1268+L2 1272)H= 2361 - 2670

*

*

2 1

b

ac

b

a

* = mainleaf

* = mainleaf

* = mainleaf

* = mainleaf

2

2

Proget REI 60 single-leaf doorson sub-frame or expansion screw fixing




REI 60CSI1174FRBZ050REI060P027F1

REI 60CSI1174FRBZ050REI060P027F1CSI1254FRBZ050REI060P031

CSI1254FRBZ050REI060P031

®

b

a

*

L = 890(L1 540+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1700(L1 850+L2 850)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L= 1200(L1 850+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L= 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

a

b

L = 1390(L1 540+L2 850)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1800(L1 900+L2 900)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

a

b

b

a

*

41

MODELS/CERTIFICATESProget REI 60 single-leaf doors

on sub-frame or expansion screw fixing




Proget REI 60 double-leaf doorson sub-frame or expansion screw fixing

* = mainleaf




* = mainleaf

L = 900 - 1170H= 1775 - 2275

diam. max.= 400


L = 1004 - 1340H= 2050 - 2500

b

a

REI 60CSI1174FRBZ050REI060P027F1CSI1254FRBZ050REI060P031











®

L = 1250(L1 900+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1440(L1 540+L2 900)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

b

a

b

a

*

*

L = 850 - 1170H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1004 - 1340H= 2050 - 2500

L = 600 - 1170H= 1775 - 2275

L = 1004 - 1340H= 2050 - 2500

b

a

L = 900 - 1170H= 1775 - 2275

diam. max.= 400


L = 1004 - 1340H= 2050 - 2500

b

a

42

MODELS/CERTIFICATESProget REI 60 double-leaf doorson sub-frame or expansion screw fixing

Proget REI 120 single-leaf doorson sub-frame or expansion screw fixing




* = mainleaf

* = mainleaf









REI 120CSI1114RFBZ050REI120P025F1CSI1248RFBZ050REI120P032F1


REI 120CSI1114RFBZ050REI120P025F1CSI1248RFBZ050REI120P032F1

®


L = 890(L1 540+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L =1700(L1 850+L2 850)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1200(L1 850+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

a

b

b

a

*

L = 1390(L1 540+L2 850)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1800(L1 900+L2 900)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

a

b

b

a

*

on sub-frame or expansion screw fixing

L = 1250(L1 900+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1440(L1 540+L2 900)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

b

a

b

a

*

*

43

MODELS/CERTIFICATES




* = mainleaf

* = mainleaf

* = mainleaf

* = mainleaf















®

L = 1700(L1 850+L2 850)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L = 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5)

H= 1938 - 2363

L = 1200(L1 850+L2 350)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L = 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5)

H= 1938 - 2363

L = 1390(L1 540+L2 850)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L = 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5)

H= 1938 - 2363

bb

a

b

a

a

*

*

44

MODELS/CERTIFICATES

L = 546 - 1007H= 1775 - 2150

REI 60CSI0660RFBZ050REI060P019F2L = 864 - 1153

H= 1938 - 2363

L = 850 - 1007H= 1775 - 2150


L = 250 - 400H= 250 - 600


L = 864 - 1153H= 1938 - 2363

b

a

Proget REI 60 double-leaf doorsPlasterboard partition

L= 890(L1 540+L2 350)- 2000(L1 1000+L2 1000)

H= 1775 - 2150 REI 60CSI0660RFBZ050REI060P019F2L= 1707(L1 855,5+L2 851,5)-

2293(L1 1144,5+L2 1148,5)H= 1938 - 2363

Proget REI 60 single-leaf doorsPlasterboard partition







* = mainleaf

* = mainleaf

®

L = 546 - 1007H= 1775 - 2150


H= 1938 - 2363

L = 850 - 1007H= 1775 - 2150


L = 250 - 400H= 250 - 600


L = 864 - 1153H= 1938 - 2363

b

a

Proget REI 120 single-leaf doorsPlasterboard partition

L= 890(L1 540+L2 350)- 2000(L1 1000+L2 1000)

H= 1775 - 2150 REI 120CSI0636RFBZ050REI120P017F2L= 1707(L1 855,5+L2 851,5)-

2293(L1 1144,5+L2 1148,5)H= 1938 - 2363

L= 1700(L1 850+L2 850)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5)

H= 1938 - 2363

L= 1200(L1 850+L2 350)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5)

H= 1938 - 2363

L= 1390(L1 540+L2 850)- 2000(L1 1000+L2 1000)


L = 250 - 400H= 250 - 600


L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5)

H= 1938 - 2363

bb

a

b

a

a

*

*

Proget REI 120 double-leaf doorsPlasterboard partition

45

MODELS/CERTIFICATES




* = mainleaf

* = mainleaf




®

L = 850 - 1170H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1004 - 1340H= 2050 - 2500

b

a

L = 900 - 1170H= 1775 - 2275

L = 1004 - 1340H= 2050 - 2500

diam. max.= 400


a

b



L = 600 - 1170H= 1775 - 2275

REI 60CSI1218FRBZ050REI060P029F1L = 1004 - 1340

H= 2050 - 2500

Proget REI 60 single-leaf doorsApplication in plasterboard walls by means of clamp frame

Proget REI 60 double-leaf doorsApplication in plasterboard walls by means of clamp frame

*

L = 890(L1 540+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1700(L1 850+L2 850)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1200(L1 850+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275

L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

a

b

b

a




46

MODELS/CERTIFICATES







* = mainleaf

®


L = 1250(L1 900+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275 REI 60CSI1218FRBZ050REI060P029F1

diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1440(L1 540+L2 900)- 2252(L1 1126+L2 1126)


diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500*

*

b

a

a

b

L = 1800(L1 900+L2 900)- 2252(L1 1126+L2 1126)


diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

b

a


L = 600 - 1170H= 1775 - 2275


H= 2050 - 2500

L = 850 - 1170H= 1775 - 2275


L = 250 - 564H= 250 - 443


L = 1004 - 1340H= 2050 - 2500

b

a

47

MODELS/CERTIFICATES




*

L = 1390(L1 540+L2 850)- 2252(L1 1126+L2 1126)


L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

b

a* = mainleaf

* = mainleaf

* = mainleaf




®


L = 900 - 1170H= 1775 - 2275


H= 2050 - 2500

diam. max.= 400


a

b


a

b

b

a

b

a

b

a

*

*

L = 890(L1 540+L2 350)- 2252(L1 1126+L2 1126)

H= 1775 - 2275 REI 120CSI1137RFBZ050REI120P026F1L = 1962(L1 996+L2 966)-

2540(L1 1270+L2 1270)H= 2050 - 2500

L = 1700(L1 850+L2 850)- 2252(L1 1126+L2 1126)


L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1200(L1 850+L2 350)- 2252(L1 1126+L2 1126)


L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1390(L1 540+L2 850)- 2252(L1 1126+L2 1126)


L = 250 - 564H= 250 - 443


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1800(L1 900+L2 900)- 2252(L1 1126+L2 1126)


diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

48

MODELS/CERTIFICATES







* = mainleaf

* = mainleaf

®

L = 1250(L1 900+L2 350)- 2252(L1 1126+L2 1126)


diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500

L = 1440(L1 540+L2 900)- 2252(L1 1126+L2 1126)


diam. max.= 400


L = 1962(L1 996+L2 966)- 2540(L1 1270+L2 1270)

H= 2050 - 2500*

*

a

a

b


49

MODELS/CERTIFICATES




* = mainleaf

* = mainleaf

®

50

®

51

SPECIFICATIONS/SECTIONSProget MULTIPURPOSE single-leaf doors

Proget MULTIPURPOSE single-leaf doors:❏ Galvanized steel-sheet door leaf with insulating-material core, without

bottom frame, total thickness 60 mm.❏ Corner frame made of galvanized steel-sheet profile, with brackets to

be set into wall, joints for on-site assembly, and screw-on bottom spacer.❏ Lock complete with cylinder bore and keyhole for patent keys.❏ Black safety handle with steel core, supplied with plates, cylinder bore and



emergency handle if required.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaf (NCS4020-B50G), anda darker shade for the frame (NCS5020-B50G). On request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leaf iscarried out using oven-baked epoxy-polyester powder and graphic printingof the decoration on the flat side of the door leaf by means of sprayedinks. The decoration is protected by transparent varnish. The finish can beflat or beaten in accordance with the decoration selected.

❏ Maximum dimensions 1340 x 2670 mm.❏ Weight approx. 26 kg/m2 wall opening.


on “surface finishing”.- Should the door be repainted the instructions outlined on the “surface

treatment” page must be followed.- FFL = Finished floor level.

1050

(FM

H >

175

0)

FM H

/2

+45

(FM

H <

175

0)

Opening left - single-leaf door (SX) Opening right - single-leaf door (DX)

Vertical sections

Net

pass

age

= F

M H

- 4

0

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

30

FFL


40

35

50

70

Wall opening (FM L)


100

15

Horizontal sections

+20+10

+15

+5

®

52

Proget MULTIPURPOSE double-leaf doors:❏ Galvanized steel-sheet door leaf with insulating-material core, without

bottom frame, total thickness 60 mm.❏ Corner frame made of galvanized steel-sheet profile, with brackets to

be set into wall, joints for on-site assembly, and screw-on bottom spacer.❏ Lock for main leaf, with cylinder bore and keyhole for patent keys.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Cavity for lock on secondary leaf also suitable for emergency-handle lock.❏ Black safety handle with steel core, supplied with plates, cylinder bore and

keyholes for patent keys.❏ 4 hinges, one per leaf with spring for the self-closing and one ball-bearing

hinge with screws for the vertical adjustment.❏ Strengthening plates inside door leaf for fastening door closer and

emergency handle if required.❏ Floor catch set with 3 screws/dowels to fix on finished floor.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch

beaten finish - light pastel turquoise for door leaves (NCS4020-B50G),and a darker shade for the frame (NCS5020-B50G). On request, powdercoating in RAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment of the door leavesis carried out using oven-baked epoxy-polyester powder and graphicprinting of the decoration on the flat side of the door leaves by meansof sprayed inks. The decoration is protected by transparent varnish. Thefinish can be flat or beaten in accordance with the decoration selected.

❏ Maximum dimensions 2660 x 2670 mm.❏ Weight approx. 28 kg/m2 wall opening.N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page

on “surface finishing”.- Should the door be repainted the instructions outlined on the “surface

treatment” page must be followed.- FFL = Finished floor level.

SPECIFICATIONS/SECTIONSProget MULTIPURPOSE double-leaf doors

1050

(FM

H >

175

0)

FM H

/2

+45

(FM

H <

175

0)

Vertical sections

FFL

15

40

100

L2

50

70

L1

35

Opening left - double-leaf door (SX)

Mainleaf

Secondary

leaf Main

leaf

Secondaryleaf

Opening right - double-leaf door (DX)

Net

pass

age

= F

M H

- 4

0

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

30

Wall opening (FM L)



Floor catch set

Horizontal sections

Net passage main leaf = L1 - 81

+20+10

+15

+5

®

53

SPECIFICATIONS/SECTIONSProget REI 60 and REI 120 single-leaf doors

Proget REI 60 and REI 120 single-leaf doors:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom

frame, total thickness 60 mm.❏ Corner frame made of galvanized steel-sheet profile, with brackets to be set into

wall, joints for on-site assembly, and screw-on bottom spacer.❏ Lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes

for patent keys.❏ 2 hinges: one hinge with self-closing spring, one ball-bearing hinge with screws for

the vertical adjustment.❏ Strengthening plates inside door leaf for fastening door closer and emergency handle

if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish

- light pastel turquoise for door leaf (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating in RAL or decorative NDD –Ninz Digital Decor can be applied for decorative or graphic elements. Surfacetreatment of the door leaf is carried out using oven-baked epoxy-polyester powderand graphic printing of the decoration on the flat side of the door leaf by means ofsprayed inks. The decoration is protected by transparent varnish. The finish can beflat or beaten in accordance with the decoration selected.

❏ For minimum and maximum dimensions possible please see page “models/certificates”.❏ Sound insulation with automatic sill seal: REI 60 = 29,5 dB

REI 120 = 30 dB❏ Weight approx.: REI 60 37 kg/m2 wall opening.

REI 120 46 kg/m2 wall opening.N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on “surface

finishing”.- Should the door be repainted the instructions outlined on the “surface treatment”

page must be followed.- FFL = Finished floor level.

1050

Vertical sections

Net

pass

age

= F

M H

- 4

0

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

30

FFL


40

35

50

70

Wall opening (FM L)


100

15

Horizontal sections

Opening right - single-leaf door (DX)Opening left - single-leaf door (SX)

+20+10

+15

+5

®

54

SPECIFICATIONS/SECTIONSProget REI 60 and REI 120 double-leaf doors

Proget REI 60 and REI 120 double-leaf doors:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom

frame, total thickness 60 mm.❏ Corner frame made of galvanized steel-sheet profile, with brackets to be set into

wall, joints for on-site assembly, and screw-on bottom spacer.❏ Lock for main leaf, with cylinder bore and keyhole for patent keys.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Cavity for lock on secondary leaf also suitable for emergency-handle lock.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes

for patent keys.❏ 4 hinges, one per leaf with spring for the self-closing and one ball-bearing hinge with

screws for the vertical adjustment.❏ Closing regulator to ensure correct closing sequence.❏ Strengthening plates inside door leaf for fastening door closer and emergency handle

if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame and in the vertical

joint of leaves.❏ Floor catch set with 3 screws/dowels to fix on finished floor❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish

- light pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating in RAL or decorative NDD –Ninz Digital Decor can be applied for decorative or graphic elements. Surfacetreatment of the door leaves is carried out using oven-baked epoxy-polyester powderand graphic printing of the decoration on the flat side of the door leaves by means ofsprayed inks. The decoration is protected by transparent varnish. The finish can beflat or beaten in accordance with the decoration selected.

❏ For minimum and maximum dimensions possible please see page “models/certificates”.❏ Weight approx.: REI 60 35 kg/m2 wall opening

REI 120 45 kg/m2 wall openingN.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on “surface

finishing”.- Should the door be repainted the instructions outlined on the “surface treatment”


1050

Vertical sections

Net

pass

age

= F

M H

- 4

0

Wall

open

ing (FM

H)

Exte

rnal f

ram

e =

FM

H +

30

FFL

15

40

100

Wall opening (FM L)


L2

50

70

L1


Floor catch set

Horizontal sections

35Net passage main leaf = L1 - 81


Mainleaf

Secondary

leaf Main

leaf

Secondaryleaf


+20+10

+15

+5

®

55


on sub-frameFire door PROGET REI 60 and REI 120 conform to UNI 9723 with one doorleaf, installed and finished “key in hand” by means of screws on the metalsub-frame consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom

frame, total thickness 60 mm.❏ An angular frame made of profiled galvanised sheet steel, supplied already fitted

with insulation material, with joints for on-site assembly, interior spacers with screwsand holes for the installation on the frame.

❏ Lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes





❏ For minimum and maximum dimensions possible please see page “models/certificates”. 600 - 1170 x 1775 - 22751004 - 1340 x 2050 - 2500

❏ Sound insulation with automatic sill seal: REI 60 = 29,5 dBREI 120 = 30 dB

❏ Weight approx.: REI 60 37 kg/m2 wall opening.REI 120 46 kg/m2 wall opening.

N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on “surface finishing”.- Should the door be repainted the instructions outlined on the “surface treatment”


1050

Vertical sections

FFL

Net

pass

age

= F

M H

- 4

0

Wall

open

ing =

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30


40

35

50

70

100

Horizontal sections

Wall opening = (FM L)


15


®

56

SPECIFICATIONS/SECTIONSProget REI 60 and REI 120 double-leaf doorson sub-frameFire door PROGET REI 60 and REI 120 conform to UNI 9723 with double doorleaf, installed and finished “key in hand” by means of screws on the metal sub-frame consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom



❏ Lock for main leaf, with cylinder bore and keyhole for patent keys.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Cavity for lock on secondary leaf also suitable for emergency-handle lock.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes




joint of leaves.❏ Floor catch set with 3 screws/dowels to fix on finished floor❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish

- light pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating in RAL or decorative NDD –Ninz Digital Decor can be applied for decorative or graphic elements. Surfacetreatment of the door leaves is carried out using oven-baked epoxy-polyester powderand graphic printing of the decoration on the flat side of the door leaves by means ofsprayed inks. The decoration is protected by transparent varnish. The finish can beflat or beaten in accordance with the decoration selected.

❏ For minimum and maximum dimensions possible please see page “models/certificates”. 890 (540 + 350) - 2252 (1126 + 1126) x 1775 - 22751962 (996 + 996) - 2540 (1270 + 1270) x 2050 - 2500

❏ Weight approx.: REI 60 ca. 35 kg/m2 wall opening. REI 120 ca. 45 kg/m2 wall opening.N.B.- Cylinder and weather stripping are supplied only upon request.- All the RAL colours available are listed on the order form and on the page on “surface finishing”.- Should the door be repainted the instructions outlined on the “surface treatment”


1050

Vertical sections

FFL

Net

pass

age

= F

M H

- 4

0

Wall

open

ing =

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30


40

50

70



15

100

Floor catch set

Horizontal sections

L2 L1


Mainleaf

Secondary

leaf Main

leaf

Secondaryleaf



®

57


expansion screw fixingFire door PROGET REI 60 or 120 conform to UNI 9723 with one door leafinstalled and finished “key in hand” by means of plugs, consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom



❏ Lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes






❏ Sound insulation with automatic sill seal: REI 60 = 29,5 dBREI 120 = 30 dB

❏ Weight approx.: REI 60 37 kg/m2 wall opening.REI 120 46 kg/m2 wall opening.



1050

Vertical sections

FFL

Net

pass

age

= F

M H

- 4

0

Wall

open

ing =

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30


40

35

50

70

100

Horizontal sections



15


®

58

SPECIFICATIONS/SECTIONSProget REI 60 and REI 120 double-leaf doorsexpansion screw fixingFire door PROGET REI 60 or 120 conform to UNI 9723 with double door leafinstalled and finished “key in hand” by means of plugs, consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom frame,

total thickness 60 mm.❏ An angular frame made of profiled galvanised sheet steel, supplied already fitted with

insulation material, with joints for on-site assembly, interior spacers with screws and holesfor the installation on the frame.

❏ Lock for main leaf, with cylinder bore and keyhole for patent keys.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Cavity for lock on secondary leaf also suitable for emergency-handle lock.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes for

patent keys.❏ 4 hinges, one per leaf with spring for the self-closing and one ball-bearing hinge with

screws for the vertical adjustment.❏ Closing regulator to ensure correct closing sequence.❏ Strengthening plates inside door leaf for fastening door closer and emergency handle if

required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame and in the vertical joint

of leaves.❏ Floor catch set with 3 screws/dowels to fix on finished floor❏ Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish

- light pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating in RAL or decorative NDD – NinzDigital Decor can be applied for decorative or graphic elements. Surface treatment of thedoor leaves is carried out using oven-baked epoxy-polyester powder and graphic printingof the decoration on the flat side of the door leaves by means of sprayed inks. Thedecoration is protected by transparent varnish. The finish can be flat or beaten in accordancewith the decoration selected.


❏ Weight approx.: REI 60 ca. 35 kg/m2 wall opening. REI 120 ca. 45 kg/m2 wall opening.



1050

Vertical sections

FFL

Net

pass

age

= F

M H

- 4

0

Wall

open

ing =

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30


40

50

70



15

100

Floor catch set

Horizontal sections

L2 L1


Mainleaf

Secondary

leaf Main

leaf

Secondaryleaf



®

59

SPECIFICATIONS/SECTIONSPlasterboard partition - Proget REI 60 doors

Plasterboard walls constructed with: metal mesh in thehorizontal guide profile in a “U” form in galvanizedsteel with thickness 0.6 mm and section 100 x 40 mm (15),blocked at the top and on the floor, vertical installationprofiles in “C” form in galvanized steel with thickness0.6 mm and section 100 x 47 mm (14). The mesh sectionis rebated by 75 mm (09, 12) next to the door and thetwo installation profiles are internally reinforced by anadditional “C” profile in galvanized steel with thickness0.6 mm and section of 50 x 47 mm (08); the two faces ofthe mesh are covered with a skin, in the door area witha double layer plate of plasterboard KNAUF GKF AKfireproof, with an external thickness of 15 mm (06) andan internal thickness of 12.5 (11); the mesh rebate of 75mm next to the door is filled with mineral wool strips witha density of 70 kilos per cubic metre (13). The door frameis specially prepared for REI 60 application and thisrequirement must be specifically mentioned on ordering.

1050

1050

20

43

43

3

8

Horizontal sectionsWall opening (FM L)

11

06

04-Self-tapping screw *

05-Silicone Seal

08

02-Rivet *


09

* supplied by NINZ

13

12

14

07-Metal angle bead KNAUF 31x31mm

03-Fixing metal angle *

Covered plasterboard type KNAUF GKB 9.5mm-10

®

60


Fireproof doors PROGET REI 60 single or double door leaf prepared for fixing in plasterboard wallconsisting of :Door leaves in beaten galvanized sheet, filled with insulation material, without bottom profile, total thickness 60 mm. Insulatedangled frame consisting of galvanised sheet steel profiles with connectors for assembly on site, bottom spacer to be screwedand fixing holes on the wall. Lock seat including opening for cylinder and insert for patent key. Self blocking lock on thesecondary door leaf with a opening lever. The seat is also prepared for the application of hardware with an anti-panic handle.Safety bolts in the door leaf. Black accident prevention handle with a steel core complete with a cover prepared with anaperture for the cylinder and insert for patent key.A pair of hinges, one for a door leaf with automatic closing spring and one fitted with a resistance bearing with verticaladjustment screws.Closing regulator to guarantee the correct closing sequence for double doors. Internal reinforcement of the door leaf toaccommodate possible fitting of door closers and anti-panic handles. Thermal expansion seal in the proper channel in theframe and in the counter profile on the secondary door leaf.Floor catch set with 3 screws/plugs to be installed on the finished floor. Consignment label with relevant information locatedin the rebate of the principal door leaf.Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish pastel turquiose lighter tone for the doorleaves (NCS4020-B50G), and a darker shade for the frame (NCS5020-B50G). On request, powder coating in RAL ordecorative NDD – Ninz Digital Decor can be applied for decorative or graphic elements. Surface treatment of the door leavesis carried out using oven-baked epoxy-polyester powder and graphic printing of the decoration on the flat side of the doorleaves by means of sprayed inks. The decoration is protected by transparent varnish. The finish can be flat or beaten inaccordance with the decoration selected. Door weight approx. 35 kg/m2 of wall opening. For minimum and maximum dimensionspossible please see page “models/certificates”.Single door leaf 546 - 1007 x 1775 - 2150 Double door leaf 890 (540 + 350)-2000 (1000 + 1000) x 1775-2150

864 - 1153 x 1938 - 2363 1707 (855,5+851,5) -2293 (1144,5+1148,5) x 1938-2363

Cylinders and seals are only supplied on request. Orders are carried according to the RAL colour range outlined on the ”surfacetreatment” page.Should the door be repainted the instructions outlined on the “surface treatment” page must be followed.

3

8

43

Wall

open

ing (FM

H)

Vertical sections15

09

12

08

09

06

130

®

61


Plasterboard walls constructed with: metal mesh in thehorizontal guide profile in a “U” form in galvanizedsteel with thickness 0.6 mm and section 100 x 40 mm (10),blocked at the top and on the floor, vertical installationprofiles in “C” form in galvanized steel with thickness0.6 mm and section 100 x 47 mm (12). The mesh sectionis rebated by 75 mm (09) next to the door the two facesof the mesh are covered with a double skin, in the doorarea with a triple layer plate of plasterboard KNAUFGKF AK fireproof, each with a thickness of 12.5 (07); themesh rebate of 75 mm next to the door is filled withmineral wool strips with a density of 70 kilos per cubicmetre (11).The structure of the door (01) consists of: two sheet steelinstallation profiles (50 x 75 mm) thickness 4 mm anchoredby means of two telescopic profiles and fitted with fixingplates for ceiling and floor; a traverse in sheet steel (50x75)with a thickness of 4mm anchored on the two structuralinstallation profiles by means of two telescopic profilesand fitted with plates to be fixed with 5.5 mm self cuttingscrews.The door frame is prepared for REI 120 applications andthis should be specified on ordering.

1050

1050

Horizontal sections

* supplied by NINZ** optional supplied by NINZ

Wall opening (FM L)

8

43

20

63

3

06-Silicone seal


03-Rivet *


04-Fixing metal angle *

12

11

09

** Galvanised structure-01

07

08-Metal angle bead KNAUF 31x31mm

®

62


Fireproof doors PROGET REI 120 single or double door leaf prepared for fixing in plasterboard wallconsisting of :Door leaves in beaten galvanized sheet, filled with insulation material, without bottom profile, total thickness 60 mm. Insulatedangled frame consisting of galvanised sheet steel profiles with connectors for assembly on site, bottom spacer to be screwedand fixing holes on the wall. Lock seat including opening for cylinder and insert for patent key. Self blocking lock on thesecondary door leaf with a opening lever. The seat is also prepared for the application of hardware with an anti-panic handle.Safety bolts in the door leaf. Black accident prevention handle with a steel core complete with a cover prepared with anaperture for the cylinder and insert for patent key.A pair of hinges, one for a door leaf with automatic closing spring and one fitted with a resistance bearing with verticaladjustment screws.Closing regulator to guarantee the correct closing sequence for double doors. Internal reinforcement of the door leaf toaccommodate possible fitting of door closers and anti-panic handles. Thermal expansion seal in the proper channel in theframe and in the counter profile on the secondary door leaf.Floor catch set with 3 screws/plugs to be installed on the finished floor. Consignment label with relevant information locatedin the rebate of the principal door leaf.Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish pastel turquiose lighter tone for the doorleaves (NCS4020-B50G), and a darker shade for the frame (NCS5020-B50G). On request, powder coating in RAL ordecorative NDD – Ninz Digital Decor can be applied for decorative or graphic elements. Surface treatment of the door leavesis carried out using oven-baked epoxy-polyester powder and graphic printing of the decoration on the flat side of the doorleaves by means of sprayed inks. The decoration is protected by transparent varnish. The finish can be flat or beaten inaccordance with the decoration selected. Door weight approx. 46 kg/m2 for single leaf, double leaf doors approx. 45 kg/m2

of wall opening. For minimum and maximum dimensions possible please see page “models/certificates”.Single leaf 546 - 1007 x 1775 - 2150 Double leaf 890 (540 + 350)-2000 (1000 + 1000) x 1775-2150 864 - 1153 x 1938 - 2363 1707 (855,5+851,5) -2293 (1144,5+1148,5) x 1938-2363

Cylinders and seals are only supplied on request. Orders are carried according to the RAL colour range outlined on the ”surfacetreatment” page.Should the door be repainted the instructions outlined on the “surface treatment” page must be followed.

Wall

openin

g (FM

H)

Vertical sections

3

8

43

10

09

11

11

07

07

150

®

63

SPECIFICATIONS/SECTIONSProget REI 60 single-leaf doors /

Application in plasterboard walls by means of clamp framePROGET REI 60 single leaf doors for clamp fitting prepared for fixingin plasterboard wall consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom

frame, total thickness 60 mm.❏ Frame constructed of Insulated galvanized sheet steel clamp profiles with accessories

for assembly on site prepared with fixing holes and cover plugs.❏ Lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes



if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.

Identification plate on door edge.❏ Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish



❏ Sound insulation with automatic sill seal: 29.5 dB❏ Weight approx. 37 kg/m2 wall opening.

Cylinder and weather stripping are supplied only on request. Should the door be repaintedthe instructions outlined on the “surface treatment” page must be followed. FFL = Finishedfloor level.Plasterboard walls consisting of : metal mesh in galvanized steel with “U” guide profile75 x 40 mm, vertical structural profiles in “C” form 75 x 47 mm (doubled against the doorframe), both sides and the frame profiles are covered with a single skin plasterboardmodel KNAUF GKF AK fireproof with a thickness of 12,5 mm.

1050


Allow spaceb e t w e e nframe andcieling forthe screwfixing of theangles

Horizontal sections

Hole to prepare = FM L -25

Nominal / order dimensions wall opening (FM L)



50

70

FFL

Net

pass

age

= F

M H

-40

Vertical sections

Hole

to p

repare

= F

M H

-12

Nom

inal

/ o

rder

dim

. wal

l ope

ning

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30

100

1515

®

64

SPECIFICATIONS/SECTIONSProget REI 60 double-leaf doors /Application in plasterboard walls by means of clamp framePROGET REI 60 double leaf doors for clamp fitting prepared for fixingin plasterboard wall consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom


for assembly on site prepared with fixing holes and cover plugs.❏ Lock for main leaf, with cylinder bore and keyhole for patent keys.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Cavity for lock on secondary leaf also suitable for emergency-handle lock.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes




joint of leaves.❏ Floor catch set with 3 screws/dowels to fix on finished floor❏ Identification plate on door edge.❏ Epoxy-polyester oven-baked powder coated with anti-scratch beaten finish - light

pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for the frame(NCS5020-B50G). On request, powder coating in RAL or decorative NDD – NinzDigital Decor can be applied for decorative or graphic elements. Surface treatmentof the door leaves is carried out using oven-baked epoxy-polyester powder andgraphic printing of the decoration on the flat side of the door leaves by means of sprayed inks.The decoration is protected by transparent varnish. The finish can be flat or beatenin accordance with the decoration selected.

❏ For minimum and maximum dimensions possible please see page “models/certificates”. 890 ( 540 + 350) - 2252 (1126 + 1126) x 1775 - 22751962 ( 996 + 996) - 2540 (1270 + 1270) x 2050 - 2500

❏ Weight approx. ca. 35 kg/m2 wall opening.

Cylinder and weather stripping are supplied only on request.Should the door be repainted the instructions outlined on the “surface treatment” pagemust be followed. FFL = Finished floor level.Plasterboard walls consisting of : metal mesh in galvanized steel with “U” guide profile75 x 40 mm, vertical structural profiles in “C” form 75 x 47 mm (doubled against the doorframe), both sides and the frame profiles are covered with a single skin plasterboardmodel KNAUF GKF AK fireproof with a thickness of 12,5 mm.

1050


Mainleaf

Secondary

leaf Main

leaf

Secondaryleaf



FFL

Net

pass

age

= F

M H

-40

Floor catch set

Horizontal sections

Net Passage main leaf = L1 -81


50

70Hole to prepare = FM L -25



L2 L1

1515

Vertical sections

Hole

to p

repare

= F

M H

-12

Nom

inal

/ o

rder

dim

. wal

l ope

ning

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30

100

®

65

SPECIFICATIONS/SECTIONSProget REI 120 single-leaf doors /

Application in plasterboard walls by means of clamp framePROGET REI 120 single leaf doors for clamp fitting prepared for fixingin plasterboard wall consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom


for assembly on site prepared with fixing holes and cover plugs.❏ Lock complete with cylinder bore and keyhole for patent keys.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes



if required.❏ Thermoexpanding gasket inserted in appropriate cavity in frame.❏ Identification plate on door edge.❏ Epoxy-polyester oven-baked powder coated with anti-scratch beaten finish - light

pastel turquoise for door leaf (NCS4020-B50G), and a darker shade for the frame(NCS5020-B50G). On request, powder coating in RAL or decorative NDD – NinzDigital Decor can be applied for decorative or graphic elements. Surface treatmentof the door leaf is carried out using oven-baked epoxy-polyester powder and graphicprinting of the decoration on the flat side of the door leaf by means of sprayed inks.The decoration is protected by transparent varnish. The finish can be flat or beatenin accordance with the decoration selected.


❏ Sound insulation with automatic sill seal: 30dB❏ Weight approx. 46 kg/m2 wall opening.

Cylinder and weather stripping are supplied only upon request.Should the door be repainted the instructions outlined on the “surface treatment” pagemust be followed. FFL = Finished floor level.Plasterboard walls consisting of : metal mesh in galvanized steel with “U” guide profile75 x 40 mm, vertical structural profiles in “C” form 75 x 47 mm (doubled against the doorframe), both sides and the frame profiles are covered with a single skin plasterboardmodel KNAUF GKF AK fireproof with a thickness of 12,5 mm.

1050


Horizontal sections




15


50

70

Vertical sections

FFL Hole

to p

repare

= F

M H

-12

Nom

inal

/ o

rder

dim

. wal

l ope

ning

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30

Net

pass

age

= F

M H

-40

125


®

66

SPECIFICATIONS/SECTIONSProget REI 120 double-leaf doors /Application in plasterboard walls by means of clamp framePROGET REI 120 double leaf doors for clamp fitting prepared for fixingin plasterboard wall consisting of:❏ Galvanized steel-sheet door leaf with insulating-material core, without bottom


for assembly on site prepared with fixing holes and cover plugs.❏ Lock for main leaf, with cylinder bore and keyhole for patent keys.❏ Self-locking mechanism with built-in release lever on secondary door leaf.❏ Cavity for lock on secondary leaf also suitable for emergency-handle lock.❏ Safety bolt in hinge-side leaf edge.❏ Black safety handle with steel core, supplied with plates, cylinder bore and keyholes




joint of leaves.❏ Floor catch set with 3 screws/dowels to fix on finished floor❏ Identification plate on door edge.❏ Epoxy-polyester oven-baked powder coated with anti-scratch beaten finish - light

pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for the frame(NCS5020-B50G). On request, powder coating in RAL or decorative NDD – NinzDigital Decor can be applied for decorative or graphic elements. Surface treatmentof the door leaves is carried out using oven-baked epoxy-polyester powder and graphicprinting of the decoration on the flat side of the door leaves by means of sprayed inks.The decoration is protected by transparent varnish. The finish can be flat or beatenin accordance with the decoration selected.


❏ Weight approx. 45 kg/m2 wall opening.

Cylinder and weather stripping are supplied only upon request. Should the door berepainted the instructions outlined on the “surface treatment” page must be followed.FFL = Finished floor level.Plasterboard walls consisting of : metal mesh in galvanized steel with “U” guide profile75 x 40 mm, vertical structural profiles in “C” form 75 x 47 mm (doubled against the doorframe), both sides and the frame profiles are covered with a single skin plasterboardmodel KNAUF GKF AK fireproof with a thickness of 12,5 mm.

1050


Mainleaf

Secondary

leaf Main

leaf

Secondaryleaf


Vertical sections

FFL Hole

to p

repare

= F

M H

-12

Nom

inal

/ o

rder

dim

. wal

l ope

ning

(FM

H)

Exte

rnal f

ram

e =

FM

H +

30

Net

pass

age

= F

M H

-40

Floor catch set

Horizontal sections

Net passage main leaf = L1 - 81





L2 L1

50

70

1515

125


® DIMENSIONSProget single-leaf doors

67

width height+20+10

+15+ 5

1000

2150

2150

720

820

2110

2110

860

960

2180

2180

1000

1300

2000

2000

2000

2000

720 1960 860 2030

1300

2050

2050

720

820

2010 860

960

2080

2010

2010

2010

2080

2080

2080

800

900

800

900

800

900

820

920

1220

1960

1960

1960

960

1060

1360

2030

2030

2030

1300 2150 1220 2110 1360 2180

2150

1340 2150 1260 2110 1400 2180

920 2110 1060 2180

1200 2150 1120 2110 1260 2180

1200 2050 1120 1260

2050

2010 20801000 2050 920 1060

1220 1360

1340 2010 20802050 1260 1400

height width height

Single-leaf STANDARD doorsWALL OPENING NET PASSAGE EXTERNAL FRAME

width

®DIMENSIONSProget single-leaf doors

68

+20+10 +15

+ 5

+20+10

+15+ 5

Dimensions for multipurpose doors only

H min. 800 only for Proget Multipurpose doors.H min. 1775 only for Proget fire rated doors.The tollerances to be applied on doors REI 60 and REI 120 for walled installation.It is not possible to produce doors with height less than width.

In case of doors to be installed on concealed frame (REI120, REI 60, or multipurpose) the wall openingdimension is the dimension which should be ordered (nominal dimension); the real wall opening isthat which takes the encumbrance of the concealed frame into account.

Doors REI 120 with dimensions FM L 891-1340 x FM H 2381-2670 are indicated CP1.

The customer must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of 2000 mm.(= wall opening 2040 mm).

The dimensions of REI doors to be applied in plasterboard walls as well as the version to be screwfixed are limited according to the specifications on the page “models/certificates”.

The dimension of the fixing holes to be made on the plasterboard wall where clamp profiles areused, do not correspond to the wall opening ordered and must be prepared in accordance with theappropriate technical information sheet.


NET PASSAGE EXTERNAL FRAME

Single-leaf SEMISTANDARD doors

width

min. max.

WALL OPENING

height height heightwidth width

min.max. max.min.

500 606420

500 606420

546 466 560

546 466 560

500 606420546 466 560

805

905

805

905

805

905

725

825

725

825

725

825

865

965

865

965

965

865

795

895

995

795

895

995

795

895

995

2150

2150

2150

2000

2000

2000

2050

2050

2050

715

815

915

715

815

915

715

815

915

2110

2110

2110

1960

1960

1960

2010

2010

2010

855

955

1055

855

955

1055

855

955

1055

2180

2180

2180

2030

2030

2030

2080

2080

2080

min.

height

max.min.

height

max.min.


width width

min. max. min. min.max. max.

Single-leaf doors TO ORDER

max.

width height

760 8301735 1805546 420 606466 5601340500 2670800 1775 1260 2630 1400 2700

® DIMENSIONSProget double-leaf doors

69

215021502150215021502150215021502150215021502150215021502150

800800800900900900100010001000800900900100010001000

3504004503504004503504004508008009008009001000

107011201170117012201270127013201370152016201720172018201920

719719719819819819919919919719819819919919919

211021102110211021102110211021102110211021102110211021102110

121012601310131013601410141014601510166017601860186019602060

218021802180218021802180218021802180218021802180218021802180

20002000

10001000

9001000

18201920

919919

19601960

19602060

20302030

20002000200020002000200020002000

9001000100010008009009001000

450350400450800800900800

12701270132013701520162017201720

819919919919719819819919

19601960196019601960196019601960

14101410146015101660176018601860

20302030203020302030203020302030

20002000200020002000

800800800900900

350400450350400

10701120117011701220

719719719819819

19601960196019601960

12101260131013101360

20302030203020302030

10001000

9001000

18201920

919919

19602060

9001000100010008009009001000

450350400450800800900800

12701270132013701520162017201720

819919919919719819819919

14101410146015101660176018601860

800800800900900

350400450350400

10701120117011701220

719719719819819

12101260131013101360

205020502050205020502050205020502050205020502050205020502050

20102010

20802080

2010201020102010201020102010201020102010201020102010

2080208020802080208020802080208020802080208020802080

width heightwidth

LEAF DIVISION

main L1 second. L2total main


height heightwidth

Double-leaf STANDARD doors

115012001250125013001350135014001450160017001800180019002000

19002000

13501350140014501600170018001800

11501200125012501300

19002000

13501350140014501600170018001800

11501200125012501300

+20+10

+15+5

®DIMENSIONSProget double-leaf doors

70

Dimensions for multipurpose doors only

H min. 800 only for Proget Multipurpose doors.H min. 1775 only for Proget fire rated doors.

Doing the following calculation you obtain the external frame dimensions:width = wall opening +60 height = wall opening +30

The tollerances to be applied on doors REI 60 and REI 120 for walled installation.

It is not possible to produce doors with height less than width.

In case of doors to be installed on concealed frame (REI120, REI 60 or multipurpose) the wall openingdimension is the dimension which should be ordered (nominal dimension); the real wall opening isthat which takes the encumbrance of the concealed frame into account.

Doors REI 120 with dimensions FM L 1761-2540 x FM H 2381-2670 are indicated CP1.

The customer must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of 2000 mm.(= wall opening 2040 mm).

The dimensions of REI doors to be applied in plasterboard walls as well as the version to be screwfixed are limited according to the specifications on the page “models/certificates”.

The dimension of the fixing holes to be made on the plasterboard wall where clamp profiles areused, do not correspond to the wall opening ordered and must be prepared in accordance with theappropriate technical information sheet.


heightwidth

WALL OPENING LEAF DIVISION NET PASSAGE

min. max. min. min.max. max. min. max.height

total widthmain L1 secondary L2

Double-leaf SEMISTANDARD doors

LEAF DIVISION

max.

Double-leaf doors TO ORDER

heightwidth

WALL OPENING

min. max. min.

secondary L2main L1

min. max. max.min.

NET PASSAGE

width height

max.min. max.min.

2110890

1960

810

890 810

2010890 810

2000 2150

2000 2000

2000 2050

540

540

540

1000

1000

1000

350

350

350

1000

1000

1000

1920

1920

1920

850 1775 810 17352670 1270 2630540890 2540 800 500 1270 350 770 2460 760

+20+10 +15

+5

+20+10

+15+5

®

71

POSITIONS OF BRACKETSProget doors to be set by mortar

Single-leaf doorFM L= 500-1340 x FM H= 800-1749

Single-leaf doorFM L= 500-1035 x FM H=1750-2200

Double-leaf door FM L= 850-2540 x FM H= 800-1749opening DX right

Single-leaf doorFM L=500-1340 x FM H=2201-2670FM L=1036-1340 x FM H=1750-2200

Double-leaf door FM L= 850-2540 x FM H= 800-1749opening SX left

270

285

87580

Wall opening (FM L)

Wa

ll op

enin

g (FM

H)

Wa

ll op

enin

g (FM

H)

Wall opening (FM L)

FFL

Wa

ll op

enin

g (FM

H)

FFL

Wall opening (FM L)

270

285

87580

FFL

1/2 1/2

Wall opening (FM L)

270

285

80

675

1/2 1/2

Wa

ll op

enin

g (FM

H)

FFL

270

285

80

-30FM L

2

Wall opening (FM L)

275 275

Wa

ll op

enin

g (FM

H)

FFL

270

285

80

-30

275 275

FM L

2

200 200

200

200 200

®

72

POSITIONS OF BRACKETSProget doors to be set by mortar

Double-leaf door FM L= 850-2070 x FM H=1750-2200opening DX right

Double-leaf door FM L= 850-2070 x FM H=1750-2200opening SX left

Double-leaf door FM L=850-2540 x FM H=2201-2670FM L=2071-2540 x FM H=1750-2200 opening DX right

Double-leaf door FM L=850-2540 x FM H=2201-2670FM L=2071-2540 x FM H=1750-2200 opening SX left

875

875W

all

op

enin

g (FM

H)

FFL

270

285

80

-30FM L

2

Wall opening (FM L)

Wa

ll op

enin

g (FM

H)

FFL

270

285

80

FM L

2

Wall opening (FM L)

Wa

ll op

enin

g (FM

H)

FFL

270

285

80

-30FM L

2

Wall opening (FM L)

-30

Wa

ll op

enin

g (FM

H)

FFL

270

285

80

Wall opening (FM L)

-30

275 275

875

675

875

675

275 275

FM L

2

200 200

200 200

®

73

ENCUMBRANCESProget single-leaf doors

80

X = FM L +27Y = FM L -200A emergency handle TWIST = 110A emergency handle SLASH = 75

Wall opening (FM L)

X

Maximum dimensions for single-leaf doorsopening to 90°

X = FM L -7Y = FM L -233Height of handle see page ”Specifications/Sections”Door with CP2 not openable to 180°

Maximum dimensions for single-leaf doorsopening to 180°

40A

40

Y17

5

20A emergency handle TOUCH BAR = 74Height of handle see page ”Specifications/Sections”

A emergency handle TAURUS INOX = 130

40

X

25 5

Wall opening (FM L)Y175

80280

®

74

ENCUMBRANCESProget double-leaf doors

Maximum dimensions fordouble-leaf doors opening to 180°

Maximum dimensions fordouble-leaf doors opening to 90°

4080 A

40

Wall opening (FM L)

X

Z17

5

Y

20

L1= main leaf portion L2= secondary leaf portion

3113

0m

ax.

X = L1 +35Y = L2 +75Z = L1 -193A emerg. handle TWIST = 110A emerg. handle SLASH = 75A emerg. handle TAURUS INOX =130A emerg. handle TOUCH BAR = 74Height of handle see page”Specifications/Sections”

X = L1 +1Y = L2 +42Z = L1 -226Height of handle see page ”Specifications/Sections”Door with CP2 or RC2 not openable to 180°

40

Wall opening (FM L)

Y

X

Z175

25

L1= main leaf portion L2= secondary leaf portion

31 130max.

5

80 280

®

All doors are fitted with M1 black plastic handles with steel core. The alternative versions illustrated above can be supplied at request.Handles are classified as accessories and are supplied not installed. The handles M1 and M2 can also be supplied instainless steel with a satin finish and rounded cover plate.The models M2, M4, M5, M9 e HOT CIL can not be combined with three point locks.* Door handle combined with anti-panic push hardware** Handle to combine with pull anti-panic lock for hotel rooms.

75

ACCESSORIESHandles

M 2M 1

** HOT CILM 20

135

70

M 11 M 14 not antipanic or emergency version

* M 3 M 4emergency handle

M 5 M 9

®

Emergency Twist (TW) and Slash (SL) handles, with lock inside door leaf, two control boxes with plastic rods and steel core,black, bar in natural anodized aluminium. Versions available: BM - BSP - BS - BMC - BC and B suitable for single-leafdoors or main leaves.The version A emergency handle is suitable only for use with secondary door leaves without external operation; the lockingmechanism consisting of upper and lower closing rods and the appropriate lock are hidden out of sight inside the secondaryleaf.

Secondary leaves with dimension L2 > 350 and < 500 can be fitted with handle SL AR with reduced control box. Emergencyhandles are supplied not installed, leaves prepared. The holes cover plate has to be ordered seperately.* The external cover plate for the PROGET door should be ordered purpose made.Anti-panic handles Taurus stainless stell (TX), with lock on the interior side of the door leaf, two control boxes and barin stainless steel and steel core. Models BM – BSP and B to be applied on single leaf doors or principal door leaves, modelA is only appropriate for secondary door leaves with no external function.The models TW BSP, TW BS, TX BSP, SL BSP e SL BS can not be combined with three point locks.

76

ACCESSORIESEmergency handles

TWIST (TW)

for second.leaf

TW BMC

TW BMTX BM

TW BSPTX BSP

SLASH (SL)

SL BC

SL BMCSL BSSL BM SL BSP

TW ATX A

TW BTX B

TW BC

for second.leaf

SL ASL B SL AR

TW BS

for second.leaf

PL SL

TAURUS INOX (TX)

70

70

200

38

75

110

210

13033

*Holes-cover plate

®

If requested rectangular glass panelscomplete with screw-in holding framesmay be fitted to both single-leaf anddouble-leaf multipurpose doors. Dimen-sions may be standard, as illustratedabove, or to order, as long as the pre-scribed edge dimensions are respected.The term „edge“ refers to the distancebetween the structural opening of thedoor and the glass in its frame.

Types of glass available:Float transparent 5 mmWired translucent 6,5 mmWired polished transparent 6,5 mmSafety laminated (4+4) 8 mmSafety laminated (3+3) 6 mm

Multipurpose rectangular window. Multipurpose circular window Tiltable window with wired glass 6,5mm thickness with frame painted likedoor (dimension 400 x 600mm).

77

GLASS PANELSProget MULTIPURPOSE doors

min

. 300

Glass panel L 300 x H 400

Wal

l ope

ning

(FM

H) m

in. 1

750

min. 900


300

Wa

ll op

enin

g (FM

H)

(FM L / L1 / L2)

250 min.min. 250

min

. 300

min

. 250

Wal

l ope

ning

(FM

H) m

in. 1

800

min. 900


300

min.250

min

.

A = 1350 FM H 2050-2149A = 1450 FM H 2150

Glass panel to orderA

min

. 300A

min

. 300

min

. 300

A

min

.

A = 1150 FM H 2050-2149A = 1250 FM H 2150

min

.

A = 550 FM H 2050-2149A = 650 FM H 2150

Gla

ss d

imen

sions

(M

V)

MV

Wal

l ope

ning

(FM

H) m

in. 1

750

(FM L/L1/L2)

min. 800

300

(FM L/L1/L2) (FM L/L1/L2)

Wal

l ope

ning

(FM

H) m

in.19

50

A200

Ø G

lass

(FM L/L1/L2)

Glass panel Ø300 and Ø400m

in.

A = 1550

A = 1600

min. 700FM L / L1 / L2

FM H = 1950-2149

FM H 2150

min. 800

Glass Ø 400Glass Ø 300

A = 1600

A = 1600

Verticalsection

Hin

ge

side

Glass dim. Ø

Wall opening

Horizontal section53.5

16.515

Glass dim. L x H

Wall opening

50

Horizontal section

®

Vision panel for single and double leaf PROGET doors made with rubber EPDM outer profile black colour and laminated3+3 transparent safety glass.

Ventilation louvre for multipurposedoors of special or standard dimensionsmade of steel and varnished like the leaf.

Ventilation louvre black or white,dimensions 482 x 99 mm (air passageapprox. 150 cm2).

Steel louvre

Steel louvre + bird mesh(net 11 x 11 x 1 mm)

Steel louvre + insect mesh(net 5 x 5 x 0.5 mm)

Bird mesh (net 16 x 16 x 3 mm)

78

GLASS PANELS/PLASTIC LOUVREProget MULTIPURPOSE doors

Hin

ge

side

Hin

ge

side

Hin

ge

side

Hin

ge

side

Verticalsection

Wall

openin

g (FM

H)

1600

(FM L/L1/L2)

Wall

openin

g (FM

H)

H

1500

(FM L/L1/L2)

L

FM L/L1/L2

Glass Ø400Glass Ø300 LxH 400x700LxH 300x500

min. 700 min. 800 min. 700 min. 800

FM H min. min. 1950 min. 2000 min. 1950 min. 2050

38

11

Ød /

H

Ø G

lass

®

79

GLASS PANELSProget REI 60 and REI 120 doors

If requested rectangular glass (REI 60 or REI 120) panels with screw-in holding frames may be fitted to both single- and double-leaf firedoors. Dimensions may be standard, as illustrated above, or else to order, with regard to the dimensional limitationsof this glass the dimensions of the edge should also be taken into consideration in accordance with the specifications on the“models/certificates” page of current catalogue. The term edge refers to the distance between the structural opening of thedoor and the glass in its frame. The glass panels are supplied mounted and sealed. Circular windows can be applied to doorsprepared for screw fixing and those fitted with clamp frames for installation in plasterboard walls. For trouble-free operationwe recommend the fitting of a door closer to all doors containing glass panels of more than 0,25 m2 surface area.

The fitting of a door closer is compulsory if the result of the following formulae is exceeded:door width x door height x 35 + (width x height window x 17) * = max. 140 for REI 60 doorsdoor width x door height x 45 + (width x height window x 84) ** = max. 140 for REI 120 doors

The values to be entered in the calculation table are lineal metres

For circular windows insert the following values :* for circular windows Ø 300 = 2, for circular windows Ø 400 = 3; for doors REI 60** for circular windows Ø 300 = 6, for circular windows Ø 400 = 10; for doors REI 120

The dimensions of glass panels have to be re-considered when used together with SLASH emergency handles.Caution: REI glass panels become opaque if exposed to the sun-rays or other atmospheric agents,both during storing and installation.Fire rated glass, due to its production process, may have some aesthetic defects which cannot beclaimed by the customer.

Wal

l ope

ning

(FM

H) m

in.2

050

Glass panel Ø300 and Ø400 REI 60 or REI 120

min

.300

Glass panel L 300 x H 400 REI 60 or REI 120

Wal

l ope

ning

(FM

H) m

in.1

775

(FM L / L1 / L2)


300

Wal

l ope

ning

(FM

H) m

in.1

800

(FM L / L1 / L2)


300

A

min

.

min

.

Wal

l ope

ning

(FM

H) m

in.1

775

(FM L / L1 / L2)

300

A

min

.

A = 1350 FM H 2050-2149A = 1450 FM H 2150

A = 1150 FM H 2050-2149A = 1250 FM H 2150

A = 550 FM H 2050-2149A = 650 FM H 2150

A

A

(FM L / L1 / L2)Ø

Gla

ss

300

min

.

A = 1550

A = 1600

min. 900FM L / L1 / L2

FM H = 2050-2149

FM H 2150

min. 1000

Glass Ø400Glass Ø300

A = 1600

A = 1600

®

80

SECTIONS-GLASS PANELSProget REI 60 and REI 120 doors

Horizontal section of rectangular window with REI 60glass

Horizontal section of rectangular window with REI 120glass

Horizontal section of circular window with REI 60 glass Horizontal section of circular window with REI 120 glass

Glass. dim. Ød

Wall opening

Edge

16.5

53.5

Glass. dim. Ød

Wall opening

Edge

16.5

53.5

Glass. dim. L x H

Wall opening

50

15

Edge Glass. dim. L x H

50

15

Edge

Wall opening

®

81

ACCESSORIESDoor closer and carrier arm for Proget doors

CP2 – CP2-EMF CP2 rack-operated over-headdoor closer with rail and closing-speed regulation. Colour silver.Strenght EN 4.

Doors ordered with CP2 are sup-plied with holes for the applicationof a door closer on the door leafand guide rail on the frame, theaccessories themselves are suppliedpacked for installation on site.NB. The maximum leaf-opening =170°Door closer CP2-EMF has, com-pared to CP2, an electromagneticblocking device which permits thefixing of the door leaf in an openposition and regulates the angleof closing from 80° to 120° max.

CP1 rack-operated over-headdoor closer with dual regulation,for closing speed and for closingimpact. Colour silver. Tensionadjustable from 3 to 4.

Carrier arm

Secondary

leaf

Mainleaf

Firedoors prepared for the fittingof M14 handles or TW A or SL Aemergency handles are suppliedwith a carrier arm (not installed)which activates the closing regulatorif only the secondary leaf is pushed.

CP1

approx. 290

51

52

®

82

ACCESSORIESSequencers for Proget doors

RC/STD closing regulator (sequencer) with built-in impact damper for double-leaf doors. Inserted in weather stripping cavityin frame head.

RC/STD

Horizontal section

RC2 closing regulator, complete set of 2 CP2 rack-operated door closers with control system incorporated in rail. Minimumwall opening 1200 mm. Colour silver. Strenght EN 4.Doors ordered with closing regulators are supplied prepared both on leaf and frame.Closing regulators are classified as accessories and are supplied not installed NB. The maximum leaf-opening = 170°.Closing system RC2-EMF1 has, compared to RC2, an electro-meccanical blocking device which enables the blocking of thedoor leaf in the open position.NB. The blocking point of principal door leaf can be regulated at any position up to 130°, at the same time the secondaryleaf can be regulated from 80° to 130° max.

RC2 - RC2-EMF1

Horizontal section

®

1537

FF black rubber weather stripping tobe inserted into the special cavityprovided on the frame and on thecentral jamb of the secondary leaf inthe case of double-leaf doors. Suppliedonly on request and in loose rolls forcutting and fitting on site.

All doors are supplied without CILcylinders. These are supplied only onrequest or together with emergencyhandles and HOT CIL handle. Eachcylinder comes with 3 keys, either withits own individual number or as partof a system with master key.

Automatic sill seal to install onthe external part of the leaf oppositeto the hinges, for better sound insu-lation.Wall opening max. 1340/main leaf

1270/sec.leafWall opening min. 500/main leaf

406/sec.leaf

Satined stainless steel INOX kick-plates,thickness 10/10 mm to be installedwith adhesive tape at the bottom partof door.Supplied on request for singleand double leaf doors (indicate sideof installation).

Satined, stainless steel INOX plates,thickness 10/10 mm, to be installedwith adhesive tape at the door leaf,at handle height. Supplied on requestfor single-and double-leaf doors (in-dicate side of installation).

Dropper of galvanised steel-sheet toinstall externally at bottom part, finis-hing like door.

83

ACCESSORIESSpecial accessories for Proget doors

29

26

40 40 40 10

230

230

®

84

FRAME EXTENSIONS/APPLICATIONSProget doors

Wall covering galvanized steel glass holding frame partsIM (1) which can be assembled with a 45 degree cornerjoint, with a thickness of 15/10 mm. Thermally powdercoated with epoxy polyester with an anti-scratch beatenfinish dark pastel turquiose tone (NCS5020-B50G), orRAL finish on request.To be fixed with screws and plugs.Fixing holes prepared on request however delivery iswithout the necessary screws and plugs. Delivery uponrequest and does not include screws/expansion screws.

Wall covering galvanized steel glass holding frame partsIM (4) which can be assembled with a 90 degree cornerjoint, with a thickness of 15/10 mm. Thermally powdercoated with epoxy polyester with an anti-scratch beatenfinish dark pastel turquiose tone (NCS5020-B50G), orRAL finish on request.To be fixed with screws and plugs.Fixing holes prepared on request however delivery iswithout the necessary screws and plugs. Delivery uponrequest and does not include screws. Holes are notprepared. We recommend this combination with a closingseal on the finished floor.

Embracing frame made of galvanized steel-sheetprofile, with a thickness of 15/10 mm for single anddouble leaf PROGET multipurpose door. Supplied in 3pieces with 45° cutted corners to join with screws, finishingwith powder coatings, nylon wrapping. Indicate the walltype and the wall thickness in the order form (from 100to 400mm).

Frame adapted for installation in a wall opening forMultiuso PROGET with one or two doors in galvanisedsheet steel with a thickness of 15/10 mm with seals foron-site installation, reinforcement bars, fixing holes andcovering plugs.

73

73

Order dimensions = FM min. 35

20 50

100

20 50

Order dimensions = FM 30

®


RAL-tones for outside using: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010-RAL5011-RAL5014-RAL6000-RAL6005-RAL6018-RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036-RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020

We recommend the use of water and neutral soap. Do not use cleaning fluids or other solvents. Wedo not accept responsibility for future complaints should these recommendations not be adhered to.


Doors are supplied with paint finishas described herein. The paint is par-ticularly hard-wearing and is charac-terized by its attractive finish. It issuitable for indoor use. The standardcolours of the frame and the doorleaf are approximately those illustratedat side. For repainting proceed asfollows:- sand and dust off the surfaces

thoroughly- give a base coat of opaque beige

0059(made by ALCEA of Milan)2-component epoxy paint EPOX5203

- repaint the surfaces with theenamel or paint selected

The door must not be ex-posed to atmospheric agents.

The colour fades when ex-posed to direct sunlight.

85

SURFACE FINISHINGProget doors

List of RAL tones at stock

RAL

1013

RAL

900

1

RAL

900

2

RAL

901

8

RAL

1003

RAL

1015

RAL

300

0

RAL

501

0

RAL

600

0

RAL

600

5

RAL

7024

RAL

7035

RAL

703

8

RAL

801

1

RAL

901

1

RAL

502

4

RAL

901

0

®

EM wall-mounted electro-magnet withwhite plastic casing, complete withrelease button. Anchor made of nickleiron plates with a hinged base.

Power source: 24VdcAbsorption: 60mARetention strenght: 550NMarked: CE

86

DETECTORS/ELECTROMAGNETS

C1

EMP

EM

35

RFC*

90

75

65

53

65

65

53

65

114

70

104

Ø126

56

150

50

240

Power supply: 230Vac – 50HzControl voltage: 24VdcMax. output current: 500mAProtection rating: IP30Backup battery charge output: 24Vdc (27.6Vdc)Power on signal: Green LEDAlarm signal: Red LEDFault signal: Yellow LEDAcoustic alarm: Internal buzzerLow Battery warning: Intermittent internal buzzer

The C1 power and control device supplies a 24 V power feed to the electromagnets that hold the fire doorsopen. If an alarm is generated by the associated smoke and heat detector, the device switches off this feed torelease the doors. The system can be reset either automatically of manually, by pressing the reset button oncethe alarm condition is eliminated. The C1 power and control device can work with up to six EM or EMPelectromagnets and 20 RFC* smoke and heat detectors. It can also drive an external alarm siren. The devicecan be connected to an external backup battery. The C1 control device is certified according to the electromagneticcompatibility and electrical safety standards application. ABS box in beige colour for wall fixing.

Operating voltage: 10.5V – 33V, typically 24VStandby consumption: 62μA - 70μA, typically 65μAFixed activation temperature: 54°C - 65°C, typically 60°COperating temperature range: -0°C…+70°CMax. relative humidity: 95%Warning signal: Red LED

RFC* smoke and heat detector without ionization chamber or any other system liableto emit radiation, with white coloured plastic box. The detector is designed to measurerapid increases in temperature (>10°C) in the warm air that flows horizontally acrossthe ceiling. The detector should be located where there are normally no strongdraughts. The RFC* smoke and heat detector is certified to UNI EN 54-7 standard.

Electro magnet EMP for floor fittingconsisting of a galvanized iron corewith block release button andinstallation base. Anchor made ofnickle iron plates with a hinged base.

Power source: 24VdcAbsorption: 60mARetention strength: 550NMarked: CE

®

Multi-voltage electro handle for controlledopening system, manufactured with metallic bodyand aluminium handle varnished in black colour.

Controlled opening system for the door thatthrough an electronic device will switch “on” thehandle. The supply could it be indifferently 12 Vdc,12 Vca, 24 Vdc and 24 Vca. – in rush startingcurrent 700mA, maintenance current 500mA.Supplied with internal timer: 30 seconds openingpermission length; when the green Led is “on” itmeans that there is a temporary activation. Thecustomer may also choice the time for thetemporary activation. The supply cable is passingthrough the inside of the door leaf and it is wiredto the electric contact of the leaf (height from thefinished floor: 850 mm).

Electro handles are supplied in thier componentparts, not fitted.

The opposite side of the electro handle iscompatible with various opening systems here insuccession shown.

Function of the ELECTRO-DOOR-HANDLE com-bined with emergency handle.The opening direction is only the pull direction (onthe electro-door-handle door leaf).When locked with a key the electro-door handleis set out of action while the push side is alwaysoperable by means of the anti-panic bar.Application: Single and double door leafs foremergency exits and where controlled access isrequired on the pull side.

87

ELECTRIC HANDLE ELM

TWIST ELM

225

38

TAURUS INOX ELM

SLASH ELM

®

Function of the ELECTRO-DOOR-HANDLEcombined with door handle MSC.The controlled opening direction can be pushor pull in accordance with the location of theelectro-door-handle.Should the door be locked with a key both theelectro-door-handle and the handle are set outof action.Application: Single and double leaf doorswhere controlled access is required in one ofthe two directions of opening, but also keylocking to prevent through traffic at times whenaccess is not permitted.

Function of the ELECTRO-DOOR-HANDLEcombined with door handle MCC/S.The controlled opening direction is only pull(the door leaf with the electro-door-handle).Should the door be locked with a key, only thedoor handle MCC/S (door leaf push) is set outof action but not the electro-door-handle.Application: Single and double leaf doorswhere controlled access is required only on thepull door leaf, while access through the pushdoor leaf is only possible if the door is not keylocked.

Function of the ELECTRO-DOOR-HANDLEcombined with door handle MCC/TThe controlled opening direction is only push (the doorleaf with the electro-door-handle).Should the door be locked with a key, only the doorhandle MCC/T (door leaf pull) is set out of action but notthe electro-door-handle.Application: Single and double leaf doors wherecontrolled access is required only on the push door leaf,while access through the pull door leaf is only possibleif the door is not key locked.

Function of the ELECTRO-DOOR-HANDLEcombined with door handle MCC/ALocking the lock with a key prevents the functioning of theelectro door handle (push door leaf), with leaf handleMCC/A exit is always garanteed even if the lock is lockedby key (anti panic function).Application: Single and double leaf doors wherecontrolled access is required only on the push door leaf,while access through the pull door leaf is only possibleif the door is not key locked.

88

ELECTRIC HANDLE ELM

®

A-A

08

”Controlled opening” system with anti-panic crossbar (Drawing A) or with handle (Drawing B).The door is kept closed by the electromagnet and by the tongue of the lock. Opening from outside by means of magneticcard and by moving back the tongue with handle or with key. From inside the electromagned is released by a button (alsoremote), a microswitch inserted in the antipanic crossbar or also by a magnetic card, the tongue of lock must be moved back(with crossbar, handle or key). 01 holding electromagnet 300 kg.complete of joined anchoring and (08) fasteningplate; 02 Control system with programming cards; 03 AC/DC Converter 220V/12V; 04 Release switch; 05 TW or SL equippedwith microswitch; 06 Wire tube in nickel-plated brass; 07 Simple magnetic coded card;

89

CONTROLLED OPENING/LOCK 3 CLOSING POINTS

07

01

02

A

A

DRAW. A

03

05

06

appro

x. 9

20

02

03

07

01A

A

DRAW. B

04

Lock with 3 closing points on jamb for Proget multi-purpose doors.Combined with cylinder and M1 lever-handle inside andoutside, or in the antipanic version BM with lever handleoutside, B outside completely blind and antipanic crossbarTwist TW, Slash SL, Taurus Inox TX or Touchbar TB internally.Can be delivered also on main leaf of double leaf doors.

®

90

REVER MULTIPURPOSE DOORS INDEX

MULTIPURPOSE DOORS

REVER

PAGE

REVER MULTIPURPOSE DOORS INDEX 90

SPECIFICATIONS/SECTIONS - MULTIPURPOSE SINGLE-LEAF DOORS 91

SPECIFICATIONS/SECTIONS - MULTIPURPOSE DOUBLE-LEAF DOORS 92

ACCESSORIES - REVER MULTIPURPOSE DOORS 93-94

ADDITIONS - REVER MULTIUPURPOSE DOORS 95

SURFACE FINISHING/POSITION OF BRACKETS/FRAME EXTENSIONS 96


Rever doors are normally installed to compartmentalize the inside of buildings and are built for thatpurpose.

®

Rever MULTIPURPOSE single-leaf doors consisting of:❏ Galvanised steel-sheet door leaf, filler of rigid honey-comb

fibre structure, total thickness 39 mm.

❏ Assembled corner frame made of profiled galvanised steel-sheet prepared for installation with brackets or bolts.

❏ Lock with cylinder bore and plastic key-hole for patent keyincluded.

❏ Black colour safety-shaped handle fitted at a height ofapprox. 1075/1125 (FM H 2050/FM H 2150) above thefinished floor.

❏ 2 pcs. Bearing hinges and 3 safety bolts on hinge side.

❏ Painted with epoxy-polyester oven-baked powder paintwith anti-scratch goffered finish - light pastel turquoise fordoor leaves (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating inRAL or decorative NDD – Ninz Digital Decor can beapplied for decorative or graphic elements. Surfacetreatment of the door leaf is carried out using oven-bakedepoxy-polyester powder and graphic printing of thedecoration on the flat side of the door leaf by means ofsprayed inks. The decoration is protected by transparentvarnish. The finish can be flat or beaten in accordance withthe decoration selected.

❏ Reversible door for opening right or left with bottom frameadaptable to floor or detachable for use without bottomframe.

❏ All Rever doors are prepared to receive a three-pointclosing device (Kit Secur).

Dimensions wall opening FM L x FM H available:700 x 2050/2150 1000 x 2050/2150800 x 2050/2150 1350 x 2050/2150900 x 2050/2150

NB.To request the doors can be supplied in different RAL tones,combined with anti-panic crossbars, door-closers, ventilationholes, louvers, frame extensions or special casings.3

2

Wall

openin

g (FM

H)

Net pass

age =

FM

H -

40

Ext

ern

al fr

am

e =

FM

H +

8

With floor-part frame

FFL

Vertical Sections

Wall opening (FM L)



Horizontal Sections

91

SPECIFICATIONS/SECTIONSRever MULTIPURPOSE single-leaf doors

44

7

®

Rever MULTIPURPOSE double-leaf doors consisting of:

❏ Leaf of galvanised steel-sheet, filler of rigid honey-combfibre structure, total thickness 39 mm.

❏ Corner frame made of profiled galvanised steel-sheetprepared for installation with brackets or bolts The frameis supplied non-assembled.

❏ Standard lock in main leaf with cylinder bore and keyholefor patent keys. Secondary leaf with central manual boltsfor closing at top and bottom.

❏ Black colour safety-shaped handle fitted at a height ofapprox. 1075/1125 (FM H 2050/FM H 2150) above thefinished floor.

❏ Each leaf with 2 bearing hinges and 3 safety bolts athinge side.

❏ Painted with epoxy-polyester oven-baked powder paintwith anti-scratch goffered finish - light pastel turquoise fordoor leaves (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating inRAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment ofthe door leaves is carried out using oven-baked epoxy-polyester powder and graphic printing of the decorationon the flat side of the door leaves by means of sprayedinks. The decoration is protected by transparent varnish.The finish can be flat or beaten in accordance with thedecoration selected.

❏ Reversible door for opening right or left with bottom frameadaptable to floor or detachable for use without bottomframe.

❏ All Rever doors are prepared to receive a three-pointclosing device (Kit Secur).

Dimensions wall opening FM L x FM Havailable:

1200 ( 800 + 400) x 2050/2150

1300 ( 900 + 400) x 2050/2150

1400 ( 700 + 700) x 2050/2150

1600 ( 800 + 800) x 2050/2150

1800 ( 900 + 900) x 2050/2150

2000 ( 1000 + 1000) x 2050/2150

NB.To request the doors can be supplied indifferent RAL tones, combined with anti-panic crossbars, door-closers, ventilationholes, louvers, frame extensions or specialcasings.

32

Wall

openin

g (FM

H)

Net pass

age =

FM

H -

40

Ext

ern

al fr

am

e =

FM

H +

8

With floor-part frame

FFL

Vertical Sections

NP main leaf = L1 - 74

Wall opening (FM L)



Floor catch set

L2 L1

Horizontal Sections

92

SPECIFICATIONS/SECTIONSRever MULTIPURPOSE double-leaf doors

7

44

®

Closing point

Dim

. gl.

panels

Glass panels Ø300

FM L min. = 700

Glass panels Ø400

FM L min. = 800

Glass panels 300 x 500

FM L min. = 700

Glass panels 400 x 700

FM L min. = 800

1600

1600

1500

1500

Sectionsglass panels

Vision panel for single and double leaf REVER doors madewith rubber EPDM outer profile black colour and laminated3+3 transparent safety glass. Opening direction of doornecessary.

Ventilation holes for single and main leaf of double leafREVER doors by sheet-holing like shown in picture, air passageapprox. 200 square cm.Rever doors with ventilation holes maintain the reversibility.

REVER SECUR version of single leaf door and main leaf ofdouble leaf doors with 3 points closing lock including europeancylinder. Available also in kit secur for site-installation. ReverSecur doors maintain the reversibility.

3 25

15

Opening left (SX) Opening right (DX)

93

ACCESSORIESRever MULTIPURPOSE doors

®

for

seco

ndary

leaf

Series TWISTTAURUSINOX

TW BMCTW BSTW BSP TW ATW BC

Series SLASH SL BMCSL BSSL BM SL BSP SL ASL BC

TW BM

Anti-panic crossbars TWIST model made of steel andprotection material made of black plastic, aluminium barnaturally anodised - encumbrance 100 mm. Types BM -BSP - BS - BMC and BC to install on single leaf doors oron main leaf, type A for secondary leaf. Available also inkit for site-installation. Taurus stainless steel (TX) withstainless steel control box and bar.

Anti-panic crossbars SLASH model made of steel andprotection material made of black plastic, aluminium barnaturally anodised - encumbrance 75 mm. Types BM - BSP- BS - BMC and BC to install on single leaf doors or onmain leaf, type A for secondary leaf. Available also in kitfor site-installation.

for

seco

ndary

leaf

Overhead doorcloser CP1 with compass arm with dualregulation for closing speed and impact. Silver colour.

Rubber gasket FF black colour to insert by pressing inthe gap of the frame. Supplied to request only in looserolls to cut and install at site.

Air vent grill, black or white as requested, dimensions482 x 99 mm (air passage approx. 150 cm2). Indicatethe opening direction of the door.

94

ACCESSOIRESRever MULTIPURPOSE doors

approx. 290

51

®

FM = Wall opening order dimensionfor standard REVER door single and double leaf.




* Removing with chisel or other tool part of existing cement walls orbricks or sub-frames of wood, 10 mm width may be gained.

95

ADDITIONSRever MULTIPURPOSE doors

Net passage

Wall

thic

kness

15

10 *

15W

all

thic

kness

20

Order dimension

Hole to prepare

Net passage

Hole to prepare

Order dimension

10 *

Hole to prepare

Order dimension

70

60

70

Wall

thic

kness

15

Net passage

Wall opening

Wall

thic

kness

appro

x. 15

48

Embracing door casing SPEED forRever door to assemble at site, galva-nised steel sheet thickness 1,25 mm tograsp on finished partition with 6 inte-grated wrenches and 2 distancers tobolt or screw-on, including the rubbergasket and the RAL tone finishing.Profile 55/70.

Order dimension Hole to prepare* Net passageFM L (width) FM L + 20 FM L - 64FM H (height) FM H + 10 FM H - 34

Embracing door casing SOLID forRever door to assemble at site, galva-nised steel sheet thickness 1,25 mm tofix by mortar or with iron band to boltor screw-on, including removable bot-tom distancer, rubber gasket and RALtone finishing. Profile 45/45.


Telescopic embracing door casingTESCOP for Rever doors in twopieces, galvanised steel sheet thickness1,25 mm to bolt on finished partition,including removable bottom distancer,rubber gasket and RAL tone finishing.Profile 55/70.


Glass holders for wall covering to be assembled for REVERdoors, made of galvanized sheet steel with a thickness oft 12/10mm. Angled seal to be screwed. Thermally epoxy polyester powdercoated. Packing included. The fixing holes are the customer’sresponsibility. Delivery upon request and does not include screws.Holes are not prepared.

Order dimension Net passage

FM L (width) FM L - 74FM H (height) FM H - 40

Net passage

approx. 32

approx. 32

approx. 32

28

28

®

Doors are supplied with paint finish as described herein. Thepaint is particularly hard-wearing and is characterized by itsattractive finish. It is suitable for indoor use. The standard coloursof the frame and the door leaf are approximately those illustratedat side. For repainting proceed as follows:- sand and dust off the surfaces thoroughly- give a base coat of opaque beige 0059 (made by ALCEA of

Milan) 2-component epoxy paint EPOX 5203- repaint the surfaces with the enamel or paint selected.

The door must not be ex-posed to atmospheric agents.

The colour fades when ex-posed to direct sunlight.



RAL-tones for outside use: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010-RAL5011-RAL5014-RAL6000-RAL6005-RAL6018-RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036-RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020

We recommend the use of water and neutral soap. Do not use cleaning fluids or other solvents. We do not accept responsibility for futurecomplaints should these recommendations not be adhered to.

96

SURFACE FINISHING/POSITION OF BRACKETS/FRAME EXTENSIONSRever MULTIPURPOSE doors

1/2 1/2

Wall opening (FM L)

200

160

80

Wal

l ope

ning

(FM

H)

223

215

-50

L2 -280 L1 -280

223

215

180

80

160-8

L1 -280 L2 -280

223

215

16018

080

-8

75

FM L

-206

175 FM

L +

11

50

A

FM L -4 Wall opening (FM L)

175 FM L -221 47 37

Side-part. min. 40

75

37

A

47

175 L1 -221

L1 -4 L1 L2 L2 +42

Wall opening (FM L)

175

L1-2

06

L1 +

11

L2 +

56

2FM

H 2FM

H 2FM

H

Encumbrances for double-leaf doorsEncumbrances for single-leaf doors

FFL

Side-part. min. 40

Wall opening (FM L) Wall opening (FM L)

Wal

l ope

ning

(FM

H)

Wal

l ope

ning

(FM

H)

FFL FFL

Height of handle = FM H 1/2 +51.5A TW = 110A SL = 75A TX = 130A TB = 74

Height of handle = FM H 1/2 +51.5A TW = 110A SL = 75A TX = 130A TB = 74

Door with CP2 not openable to 180° Door with CP2 or RC2 not openable to 180°

RAL9010

Serial colour

Colours always available

Brackets position for single-leafdoors opening right and left (DX - SX)

Brackets position for double-leafdoors opening left (SX)

Brackets position for double-leafdoors opening right (DX)

RAL 9018 RAL3000

RAL7024

RAL9011

RAL1013

RAL5010

RAL7035

RAL9001

RAL1003

RAL6000

RAL7038

RAL9002

RAL 1015

RAL6005

RAL8011

RAL5024

®

97

®

98

HINGED DOORS

VERTICAL SLIDINGDOORS

SLIDING DOORS

REI 120 - REI 180

®

IDOORS INDEX 99

ILLUSTRATIONS 100

SPECIFICATIONS – DOUBLE-LEAF REI 120 HINGED DOORS 101

SECTIONS – DOUBLE-LEAF REI 120 HINGED DOORS 102

ENCUMBRANCES – DOUBLE-LEAF REI 120 HINGED DOORS 103

SPECIFICATIONS / SECTIONS – REI 120 VERTICAL SLIDING DOORS 104

SPECIFICATIONS – REI 120 SINGLE-LEAF SLIDING DOORS 105

SECTIONS - REI 120 SINGLE-LEAF SLIDING DOORS 106

SPECIFICATIONS – REI 180 SINGLE-LEAF SLIDING DOORS 107

SECTIONS - REI 180 SINGLE-LEAF SLIDING DOORS 108

SPECIFICATIONS – REI 120 DOUBLE-LEAF SLIDING DOORS 109

SECTIONS - REI 120 DOUBLE-LEAF SLIDING DOORS 110

DESCRIPTIONS – REI120 TELESCOPIC SLIDING DOORS 111

SECTIONS – REI120 TELESCOPIC SLIDING DOORS 112

WORKING SYSTEMS – THERMAL FUSE OR ELECTROMAGNETS 113

OPTIONALS – RETURNED COUNTERWEIGHT AND BRAKING DEVICE 114

OPTIONALS 115

99

DOORS INDEX

Fireproof doors, because of their dimensions and specific functions have to be carefully planned. Allthe measurements of any installation place have to be taken and the verticality of walls and floorlevels have to be verified.

Particular attention must be paid to the measurement of any projections or surfaces that could inhibitthe functioning or the free movement of the door.

In view of the weight of the doors, the bearing capacity of the walls and of the supporting beamsmust also be verified, and these must also be suitable for the fixing of rails and frames.

Our technical office, is at your disposal for any other explanation that may be required, and holdsthe forms for orders or offers.

Ninz company keeps the right to introduce technical modifications any time without notice.All dimensions expressed in mm.

Fire break doors are normally installed to compartmentalize the inside of buildings and for thatpurpose they are built.

PAGE

®

100

ILLUSTRATIONS

Color light pastelturquoise

Firebreak doors are available in singleand double leaf horizontal sliding orhinged versions and as drop shutter,certified for integrity and insulationaccording to the Italian UNI 9723norm and approved by the Ministryof Interior.They are used principally for largeopenings or particular situations andbuilt to order dimensions. The leavesconsist of steel sheets with fire resistantcore in vertical modules with flushjoints.

®

101

SPECIFICATIONSDouble-leaf REI 120 hinged doors

Opening left (SX) Opening right (DX)

Main leafSecondary leafMain leaf

Secondary leaf

Double-leaf REI 120 hinged door in accordance with UNI9723 consisting of:

❏ One piece leaves of joined moduls made of steel-sheet, core with insulating materials. Flush joints, withoutsill. Total thickness 73mm.

❏ Corner frame of “Z“ profiled steel-sheet with anchors for installation.

❏ Lock with cylinder on main leaf.

❏ Black, dual-lever safety handle with steel core, and plates.

❏ Secondary leaf including self-locking mechanism at top and floor.

❏ 2 extra-strong hinges for each leaf.

❏ Self expanding gasket inserted in the edge of leaves.

❏ Identification plate with reference details on one leaf edge.

❏ Maximum opening through 150° with door closer.

❏ Thermally epoxy polyester powder coated, with a beaten anti-scratch finish, pastel turquoise - light tone(NCS4020-B50G) for doors with a maximum height of 4500 mm.A beaten anti-scratch finish, pastel turquoise – light tone for doors with a height of more than 4500 mm.

❏ Dimensions on request.

❏ Compulsory accessories: 1 door closer for leaf.1 sequencer to ensure the correct closing sequence of the leaves.

❏ Weight of door approx. 60 kg/m2 of wall opening.

❏ Packing: Door leaf in one piece in metal containers or on disposable timber pallets.

N.B.- FFL = Finished floor level.- Caution: leaves are supplied in one piece, this must be considered for handling and bringing to installation

place.- All orders are carried out in accordance with the RAL colour range as listed for Proget doors.

The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated 19.03.1996all doors used for emergency ways or exits must have a minimum height of 2000 mm. (= wall opening2050 mm). Application of a revolving door as an emergency exit is at the customer’s risk.

For particular on site situations (e.g. air draughts) it may be necessary to fit two door closers in pairson each door leaf. One door closer per door leaf is included in the price of the element, the price ofthe second door closer must be added.

®

102

SECTIONSDouble-leaf REI 120 hinged doors

AA

B

B

1050

FFL

Net

pass

age

= H

- 5

0

Exte

rnal f

ram

e =

H +

40

B-B27

38

12

Wall

open

ing =

H

90

50

12

40 50

90

Net passage = L - 100

L1 - 85

A-A38

External frame = L + 80

Wall opening = L 40

27

40

®

103

ENCUMBRANCESDouble-leaf REI 120 hinged doors

50 A

L2 = secondary leaf portion L1 = main leaf portion

Wall opening (L)

43

40 40

Y

X

X = L1 +47Y = L2 +67Z = L1 -250A emergency handle TWIST or CISA = 100Height of handle 1050

Maximum dimensions fordouble-leaf doors opening to 90°.N.B.: Maximum open 150°

Z17

5

20

®

104

SPECIFICATIONS/SECTIONSREI 120 vertical sliding doors

REI 120 vertical sliding door in accordance with UNI9723consisting of:

❏ One piece door leaf with continual beaten sheet steel panels filled withinsulation material. Door leaf thickness 80 mm.

❏ Firm pressure-formed steel-sheet labyrinths; door runs on lateral railsand flame-proof low-friction arresters.

❏ Adjustable counterweights.❏ Recessed handles located on the lower part on both sides.❏ Thermoexpanding gasket on all labyrinths.❏ Identification plate with reference details on handle.❏ Finishing with primer coat oven-dried at 160°, in light pastel turquoise.❏ Dimensions on request.❏ Normal operation:

The door remains in the open position, held by a thermal fuse locatedat the top on the labyrinth distancer. The door can be closed manually.In case of fire the door closes as soon as the thermal fuse breaks.

❏ The door may also be fitted with electromagnets if the customer requests it.Electromagnets medium size: -Nominal tension: 24V.d.c.

-Nominal current: 125mA-Retain strenght: 600N

Electromagnets big size: -Nominal tension: 24V.d.c.-Nominal current: 200mA-Retain strenght: 1400N

❏ The fitting of any other accessories normally depends on the dimensionsof the door.

N.B.- Minimum wall opennig = 300mm x 500mm.- All colours in the RAL range are available to order.

Wal

l ope

n. =

H (m

in.50

0)H

+ 2

25 *

Exte

rnal f

ram

e m

in.1

225

Room

Vertical sections

Shelfat customer’s expense

* Variable dimensions for large doors.

Wall opening = L

30

200*

30

200*

External frame

120

Horizontal sections

®

REI 120 single-leaf sliding door in accordance with UNI9723 consisting of:

❏ To install on weight-bearing wall or insulated steel beam or insulated steel structure.

❏ One piece door leaf with continual beaten sheet steel panels filled with insulation material. Screw assembly.Door leaf thickness 80 mm.

❏ Horizontal, pressure-formed steel-sheet rail, pre-drilled for fixing with expansion screws (not included). Toplow friction-sliding trolley mechanism, with bolt outside wall opening on floor. A pressure-formed steel-sheetprotection covers the top running guide.

❏ Pressure-formed sheet-steel labyrinths.

❏ Adjustable counterweight covered with pressure-formed steel-sheet guard with cavity for door edge.

❏ Recessed handles on both sides.

❏ Thermoexpanding gasket on all labyrinths and under door leaf.

❏ Identification plate with reference details direct on handle.

❏ Finished, with brimer coat oven-dried at 160°, in light pastel turquoise tone.

❏ Packing: in disposable metal containers.

❏ Dimensions to request.

❏ Working of series-produced doors with thermal fuse:The door remains in any position, as it is left. The counterweight remains connected to the thermal fuse andcloses the door only if the fuse breaks.

❏ Working of doors ordered with electromagnets (to request):The door remains normally open. The counterweight is always pulling the door leaf and the door closes whenthe current to the electromagnets is interrupted.For reasons of safety all doors equipped with electromagnets must also be fitted with a braking device.Electromagnets for leaves up to 12 m2: -Nominal tension: 24V.d.c.


Electromagnets for leaves of more than 12 m2: -Nominal tension: 24V.d.c.-Nominal current: 200mA-Retain strenght: 1400N

❏ The fitting of any other accessories normally depends on the dimensions of the door.❏ Weight of sliding door approx. 50 kg/m2 of wall opening.

N.B.- All colours in the RAL range are available to order.- For reasons of safety we recommend the fitting of the braking mechanism to control

the closing speed of the door.- FFL = Finished floor level.

105

SPECIFICATIONSREI 120 single-leaf sliding doors

Opening left (SX) - single-leaf door Opening right (DX) single-leaf door

®

106

SECTIONSREI 120 single-leaf sliding doors

B

B

A-A

150

120

230

Wall

open

ing =

H (m

in. 5

00)

250* Wall opening = L L + 250

120

A A

Supportingbeam


FFL

B-B

INCLINATION OF RAIL 2mm/r.m.

Room

51

Supporting beam

suitable for expansion screws

1015

300

®

REI 180 single-leaf sliding door in accordance with UNI9723 consisting of:

❏ To install on weight-bearing wall:




❏ Adjustable counterweight covered with pressure-formed steel-sheet guard with cavity for door edge.

❏ Recessed handles on both sides.

❏ Thermoexpanding gasket on all labyrinths and under door leaf.


❏ Finished, with brimer coat oven-dried at 160°, in light pastel turquoise tone.



❏ Working of series-produced doors with thermal fuse:The door remains in any position, as it is left. The counterweight remains connected to the thermal fuse andcloses the door only if the fuse breaks.

❏ Working of doors ordered with electromagnets (to request):The door remains normally open. The counterweight is always pulling the door leaf and the door closes whenthe current to the electromagnets is interrupted.For reasons of safety all doors equipped with electromagnets must also be fitted with a braking device.

Electromagnets for leaves up to 12 m2: -Nominal tension: 24V.d.c.-Nominal current: 125mA-Retain strenght: 600N


❏ The fitting of any other accessories normally depends on the dimensions of the door.❏ Weight of sliding door approx. 75kg/m2 of wall opening.

N.B.

- All colours in the RAL range are available to order.- For reasons of safety we recommend the fitting of the braking mechanism to control


107

SPECIFICATIONSREI 180 single-leaf sliding doors

Opening left (SX) - single-leaf doors Opening right (DX) - single-leaf doors

®

108

SECTIONSREI 180 single-leaf sliding doors

bearing beamin brick or inreinforcedconcrete



Supporting beam


B

B

A-A

Wall

open

ing =

H (m

in. 5

00)

210

180

180

A A

FFL

B-B

51

250* Wall opening = L L + 250

1015

300

230

Room

®

REI 120 double-leaf sliding door in accordance with UNI9723 consisting of:

❏ To install on weight-bearing wall or insulated steel beam or insulated steel structure.




❏ Adjustable counterweights covered with pressure-formed, sheet-steel guards.

❏ Recessed handles on both sides of the leaves.

❏ Thermoexpanding gasket on all labyrinths and under door leaves.


❏ Finished, with primer coat oven-dried at 160°, in light pastel turquoise tone.



❏ Working of series-produced doors with thermal fuse:The door leaves remain in any position, as they are left. The counterweights remain connected to the thermalfuses and close the door only if the fuses break.

❏ Working of doors ordered with electromagnets (to request):The leaves remain normally open. The counterweights are always pulling the door leaves, and close when thecurrent to the electromagnets is interrupted.For reasons of safety each leaf of doors equipped with electromagnets must also be fitted with a brakingdevice.Electromagnets for leaves up to 12 m2: -Nominal tension: 24V.d.c.



❏ The fitting of any other accessories normally depends on the dimensions of the door.

❏ Weight of sliding door approx. 50 kg/m2 of wall opening.



109

SPECIFICATIONSREI 120 double-leaf sliding doors

Opening left Opening right

®

110

SECTIONSREI 120 double-leaf sliding doors

Supportingbeam

B-B

B

A-A

150

120

230

Wall

open

ing =

H (m

in. 5

00)

Room

A A

B

1/2 L + 350 min.* Wall opening = L 1/2 L + 350 min.*

120


FFL

Inclination of rail 2 mm/r.m.

Supporting beam


1015

300

®

REI 120 telescopic sliding door in accordance with UNI9723 consisting of:

❏ To be installed in structural walls or from the ceiling.

❏ Continuous module door leaf panels constructed of beaten sheet steel sandwich filled with insulation material.Screw assembly. Total thickness of the door leaf 80 mm.



❏ Closing counter weight which can be calibrated, in a protective pressure formed sheet steel case with a rebatefor the strike profile and distance spacer.

❏ Recessed door handles on both sides.

❏ Thermally expanding seal located on all labyrinths and under the door leaf.


❏ Finished, with primer coat oven-dried at 160°, in light pastel turquoise tone.

❏ Packaging: modules in disposable metal containers.


❏ Function of standard doors with thermal insulation material:When released the door remains stationery regardless of position. The counterweight remains attached tothe themal insulation material and closes the door only when the material is damaged.

❏ Function of door elements with an electromagnet (on request):Normally the door remains open. The counterweight remains attached to the door leaf and the closing devicecloses each time the electrical current from the electromagnet is interrupted.For safety reasons the customer must apply a braking device to door elements equipped with electromagnets.

Electromagnets for leaves up to 12 m2: -Nominal tension: 24V.d.c.-Nominal current: 125mA-Retain strenght: 600N


❏ The fitting of any other accessories normally depends on the dimensions of the door.

❏ Sliding force is approx. 50 kg/m2 metre of wall opening.



111

SPECIFICATIONSREI 120 telescopic sliding door

Opening right (DX) single-leaf doorOpening left (SX) single-leaf door

®

112

SECTIONSREI 120 telescopic sliding door

Supportingbeam

B-B

Room

Wall

open

ing =

H (m

in.5

00)

260

100

A-A

Supporting beam



110

150

250* Wall opening = L L/2 + 250

* Variable dimensions in particular cases

220

230

CHARACTERISTICS

Bi-lateral

FFL

Mono-lateral

B

B

A A

1015

300

®

Door leaves fitted with thermalfuses are not affected by thecounterweight in normal use. The finalclosing impact is absorbed by thedamper.

Door leaves fitted with electro-magnets are always affected bythe counterweight. They can be eitherheld open by the electro-magnet orpulled shut by the counterweight.

113

WORKING SYSTEMS

Thermal fuse

SAM end buffer

Cable

SAM end buffer

70°

Stop

ElectromagnetPlate

Electricalconnection

Thermal fuse or electromagnets

L + 200 (Normal counterweight)L + 350 (Returnet counterweight)

H +

90

Exit positionof electric wire

E

®

Sliding doors can be supplied withreturned counterweight on re-quest, should the encumbrances atthe closing side of the door make itnecessary. However, the 100 mm over-lap of the leaf must be guaranteed.Indicate in the orders NORMAL orSPECIAL joint.

The fitting of a braking device onall doors is recommended in theinterests of safety.

114

OPTIONALSReturned counterweight and braking device

Return pulley

70°

Braking device VT

NORMAL SPECIAL100 min.130

®

On request sliding doors can be fittedwith a night lock (not included incertificate).

Door elements with a width of morethan (height H - 800 mm) x 2 must befitted with a pulley (1) to ensure thecomplete closing of the door.Standard pulley is used up to a maxi-mum width of (height H - 800 mm) x4.Special pulley (2) equipped withmultiplier are used up to a maximumwidth of (height H - 1150 mm) x 6.Encumbrance of protection coverapprox. 350 mm.

A beam with a span of 100 x200 mm is applicable for single anddouble leaf sliding door elements inaccordance with REI 120.The beam is supplied prepared forthe fixing to one side. With an L over2500 mm also, fixing to the ceiling isprepared. The covering of the beamwith two panels of 12,5 mm plaster-board is the responsibility of thecustomer.

Warning:Encumbrance of the slidingrail to install on insulated steelbeam = 230 mm.

Encumbrance of the slidingrail to install on reinforcedconcrete beam = 230 mm.

OPTIONALS

115

1 2

Wall opening LFFL

Beam in passage

1

2

3

4

5

Beam in passage of100 x 200 mm

Plasterboard panelsthickness 12,5 mm

Mineral wool150 kg/mc

Fastening plate

Gate

Room

Room

Wall

open

ing H

FFL

1

2

3

4

5

230

®

116

GLAZED DOORS

GLAZED FIRMWINDOWS

REI 30 - REI 60

REI 90 - REI 120

®

117

GLAZED DOORS INDEX

Considering the weight of glazed doors the load of walls and beams must be verified (REI30 = 45kg/m2, REI 60 = 70kg/m2, REI 90 = 130kg/m2, REI 120 = 140kg/m2).Our technical office, is at your disposal for any other explanation or enquiries, and providesthe forms for orders or offers.Ninz maintains the right to introduce technical modifications any time without prior notice.All dimensions are expressed in mm.Fire break doors are normally installed to compartmentalize the inside of buildings andfor that built for that purpose.- REI glass becomes opaque if exposed to the sun rays.- REI glass deteriorates if exposed to the atmosphere.Should the materials be installed in a place even with partial exposure to sun rays,appropriate colours and glasses have to be used; in these cases contact our technicaldepartment for instructions.Fire rated glass due to its production process may have some aesthetic defects which cannotbe claimed by client.N.B. where the secondary door leaf L2 is smaller than 600 mm or the wall opening is lessthan 1200 mm, the closing device is installed on the opposite side to the hinges and canonly be opened up to an angle of 110 degrees.

GLAZED DOORS INDEX 117

ILLUSTRATIONS / SURFACE FINISHING 118

SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 30 AND REI 60 SINGLE-LEAF DOORS, STEEL 119

SECTIONS - GLAZED REI 30 AND REI 60 SINGLE-LEAF DOORS, STEEL 120

SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 30 AND REI 60 DOUBLE-LEAF DOORS, STEEL 121

SECTIONS - GLAZED REI 30 AND REI 60 DOUBLE-LEAF DOORS, STEEL 122

SPECIFICATIONS / SECTIONS - GLAZED COMPLEX REI 30 AND REI 60 DOORS, STEEL 123

SECTIONS - GLAZED COMPLEX REI 30 AND REI 60 DOORS, STEEL 124

INSTALLATIONS - GLAZED REI 30 AND REI 60 DOORS, STEEL / HORIZONTAL SECTIONS 125

INSTALLATIONS - GLAZED REI 30 AND REI 60 DOORS, STEEL / VERTICAL SECTIONS 126

SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 60 SINGLE-LEAF DOORS, ALUMINIUM 127

SECTIONS - GLAZED REI 60 SINGLE-LEAF DOORS, ALUMINIUM 128

SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 60 DOUBLE-LEAF DOORS, ALUMINIUM 129

SECTIONS - GLAZED REI 60 DOUBLE-LEAF DOORS, ALUMINIUM 130

SPECIFICATIONS / SECTIONS - GLAZED COMPLEX REI 60 DOORS, ALUMINIUM 131

SECTIONS - GLAZED COMPLEX REI 60 DOORS, ALUMINIUM 132

INSTALLATIONS - GLAZED REI 60 DOORS, ALUMINIUM / HORIZONTAL SECTIONS 133

INSTALLATIONS - GLAZED REI 60 DOORS, ALUMINIUM / VERTICAL SECTIONS 134

SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 90 AND REI 120 SINGLE-LEAF DOORS, ALUMINIUM 135

SECTIONS - GLAZED REI90 AND REI 120 SINGLE-LEAF DOORS, ALUMINIUM 136

SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 90 AND REI 120 DOUBLE-LEAF DOORS, ALUMINIUM 137

SECTIONS - GLAZED REI90 AND REI 120 DOUBLE-LEAF DOORS, ALUMINIUM 138

SPECIFICATIONS / SECTIONS - GLAZED COMPLEX REI 90 AND REI 120 DOORS, ALUMINIUM 139

SECTIONS - GLAZED COMPLEX REI 90 AND REI 120 DOORS, ALUMINIUM 140

INSTALLATIONS - GLAZED REI 90 AND REI 120 DOORS, ALUMINIUM / HORIZONTAL SECTIONS 141

INSTALLATIONS - GLAZED REI 90 AND REI 120 DOORS, ALUMINIUM / VERTICAL SECTIONS 142

SPECIFICATIONS / SECTIONS - GLAZED FIRM STEEL WINDOWS TYPE REI 60 TO BE BUILT INTO THE WALL 143

SPECIFICATIONS / SECTIONS - GLAZED FIRM STEEL WINDOWS TYPE REI 120 TO BE BUILT INTO THE WALL 144

SPECIFICATIONS / SECTIONS - GLAZED FIRM STEEL WINDOWS TYPE REI 30 OR REI 60 145

SPECIFICATIONS / SECTIONS - GLAZED FIRM ALUMINIUM WINDOWS TYPE REI 60, REI 90 OR REI 120 146

PAGE

®

118

ILLUSTRATIONS/SURFACE FINISHING

for glazed steel window for glazed alu windowWhite RAL 9010 RAL 9010White aluminium RAL 9006Grey light RAL 7035 RAL 7035Black RAL 9005Green RAL 6005 RAL 6005Red RAL 3000 RAL 3000Blue RAL 5010 RAL 5010Brown RAL 8017 RAL 8017Ivory RAL 1013 RAL 1013Pastel turquoise clear NCS 4020-B50GAluminium Ox Silver, clear bronze, brown, black

Glazed fire break doors certified according to the UNI 9723norm are available in single and double leaf versions and incomplex systems REI 30, REI 60, REI 90 and REI 120.Colours which are always available include:

WARNING: standard colours Ninz (NCS4020-B50Gand NCS5020-B50G) are not carried out on aluminiumglazed doors. Other tones are made to request only.

®

119

SPECIFICATIONS/ENCUMBRANCESGlazed REI 30 and REI 60 single-leaf doors, steel

Glazed REI 30 and REI 60 single-leaf door, of steel profiles in accordance with UNI9723 consisting of:❏ Fireproof frame construction GLAZED 30 or 60 minutes, made of cold profiled steel tubing system 1,5 mm

thickness, insulated inside with a non-organic silicate compound without asbestos, provided with rebates forself-expanding and rubber gaskets. Total thickness of profile 50 mm.

❏ Heavy steel hinges 3 wings fixed with screws to the frame, ball-bearing type with stainless steel pivot.❏ Self-latching lock, release by rotation of handle.❏ Yale lock cylinder in nickle bronze.❏ Stainless steel fire proof door handle fitted at a height of 1040 mm above the finished floor and at 900 mm

in combination with a PUSH handle.❏ Overhead door closer for the self-closing of leaf.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total

thickness of the glass for REI 30 approx. 15 mm and for REI 60 approx. 23 mm.❏ Thermally powder coated surface treatment.❏ Assembled on galvanised tubular concealed frame, with anchors to be fixed by mortar which should be to

be ordered seperately.❏ Maximum dimensions: 1410 x 2610 mm

1450 x 2500 mm❏ Minimum dimension for leaf with anti-panic crossbar: L = 650 mm.

25

64

114

50

74

L -6

4

75

N.B.- The colours available as standard finishes are listed on the “surface treatment” page of the current catalogue.- FFL = Finished floor level

The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated 19.03.1996all doors used for emergency ways or exits must have a minimum height of 2000 mm. (= wallopening 2074 mm).

Opening left (SX) - single-leaf doof Opening right (DX) - single-leaf door

®

120

SECTIONSGlazed REI 30 and REI 60 single-leaf doors, steel

FFL

A-A

B-B

Net

pass

age

= H

-74

Conc

eale

d f

ram

e pass

age

= w

all

open

ing =

H

25

Concealed frame passage = wall opening = L

25

Net passage = L -148

B

A A

B

90

855

®

121

SPECIFICATIONS/ENCUMBRANCESGlazed REI 30 and REI 60 double-leaf doors, steel

Glazed REI 30 and REI 60 double-leaf door, of steel profiles in accordance with UNI9723 consisting of:❏ Fire break framework construction GLAZED 30 or 60 minutes, made of cold profiled steel tubing system 1,5 mm

thickness, insulated inside with a non-organic silicate compound without asbestos, having gaps to containself-expanding and rubber gaskets. Total thickness of profile 50 mm.


in combination with a PUSH handle.❏ Overhead door closer for the self-closing of the leaf.❏ Self-locking mechanism on secondary leaf and sequencer in sight for double leaf doors.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total

thickness of the glass for REI 30 approx. 15 mm and for REI 60 approx. 23 mm.❏ Thermallly powder coated surface treatment.❏ Assembled on galvanised tubular concealed frame, with anchors to be fixed by mortar which should be to

be ordered seperately.❏ Maximum dimensions 2700 x 2610 mm.❏ Minimum dimension for leaf with anti-panic crossbar:

asymmetric leaves symmetric leavesAnti-panic crossbar Twist Taurus BM for main leaf min 800 mm min 600 mmAnti-panic crossbar Twist Taurus A for secondary leaf min 400 mm min 600 mmAnti-panic crossbar Cisa Touch-bar BM for main leaf min 800 mm min 600 mmAnti-panic crossbar Cisa Touch-bar A for secondary leaf min 400 mm min 600 mm

N.B.- The colours available as standard finishes are listed on the “surface treatment” page of the current catalogue.- FFL = Finished floor levelThe client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated 19.03.1996all doors used for emergency ways or exits must have a minimum height of 2000 mm. (= wallopening 2074 mm).

Opening left (SX) - double-leaf door Opening right (DX) - double-leaf door

114

25

64

75

L1 -

5

L2 -

5

50


Secondary leaf

74

®

122

SECTIONSGlazed REI 30 and REI 60 double-leaf doors, steel

B-B

FFL

Net

pass

age

= H

-74

Conc

eale

d f

ram

e pass

age

= w

all

open

ing =

H

25

A-A

25

Passage main leaf = L1 -89



L2 L1

B

A A

B

90

855

®

123

SPECIFICATIONS/SECTIONSGlazed complex REI 30 and REI 60 doors, steel

Glazed complex REI 30 and REI 60 door, of steel profiles in accordance with UNI9723 consisting of:

❏ Fireproof frame construction GLAZED 30 or 60 minutes, made of cold profiled steel tubing system 1,5 mmthickness, insulated inside with a non-organic silicate compound without asbestos, provided with rebates forself-expanding and rubber gaskets. Total thickness of profile 50 mm.


in combination with a PUSH handle.❏ Overhead doorcloser for the self-closing of leaf.❏ Self-locking mechanism on secondary leaf and sequencer in sight for double leaf doors.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total


be ordered seperately.❏ Minimum dimension for leaf with anti-panic crossbar:

asymmetric leaves symmetric leavesAnti-panic crossbar Twist Taurus BM for main leaf min 800 mm min 600 mmAnti-panic crossbar Twist Taurus A for secondary leaf min 400 mm min 600 mmAnti-panic crossbar Cisa Touch-bar BM for main leaf min 800 mm min 600 mmAnti-panic crossbar Cisa Touch-bar A for secondary leaf min 400 mm min 600 mm

N.B.- The colours available as standard finishes are listed on the “surface treatment” page of the current catalogue.- FFL = Finished floor level.

The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated 19.03.1996all doors used for emergency ways or exits must have a minimum height of 2000 mm. (= H1= 2070mm).

A-A

L3


Net passage = L1 -14025

L1

®

124

SECTIONSGlazed complex REI 30 and REI 60 doors, steel

FFL

C-C

B-B

Net

pass

age

= H

1 -

70

Conc

eale

d f

ram

e pass

age

= w

all

open

ing =

H


L2

25

H1

H2

Pass. = L1 -140

L1

25

C

C

B A A B

90

855

®

125

INSTALLATIONSGlazed REI 30 and REI 60 doors, steel / Horizontal sections

20 50 50

130

4

50

Wall opening = concealed frame passage

30 and 60min. glass(integrity andinsulation)

Concealed frame of galvanised tubular

Screw TC 4,8 x 19

Self expanding gasket

Seal

Externalrest assemble

1

Corridor assemble2

Internalrest assemble

3

®

126

INSTALLATIONSGlazed REI 30 and REI 60 doors, steel / Vertical sections

Corridor assemble2Internalrest assemble3

20

50

50

130

50Wall

open

ing =

conc

eale

d f

ram

e pass

age


Screw TC 4,8 x 19

Self expanding gasketSeal


1

30 and 60 min. glass(integrity and insulation)

4

® SPECIFICATIONS/ENCUMBRANCESGlazed REI 60 single-leaf doors, aluminium

127

Glazed REI 60 single-leaf door, of aluminium profiles in accordance with UNI9723 consisting of:❏ Fireproof frame construction GLAZED 60 minutes, made of cold profiled steel tubing system 1,5 mm thickness,

insulated inside with a non-organic silicate compound without asbestos, provided with rebates for self-expandingand rubber gaskets. Total thickness of profile 70 mm.


in combination with a PUSH handle.❏ Overhead door closer for the self-closing of leaf.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total

thickness of the glass for REI 60 approx. 23 mm.❏ Thermally powder coated surface treatment.❏ Assembled on galvanised tubular concealed frame, with anchors to be fixed by mortar which should be to

be ordered seperately.❏ Maximum dimensions 1450 x 2529 mm

1427 x 2630 mm❏ Minimum dimension for leaf with anti-panic crossbar: L = 650 mm.


The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of2000 mm. (= wall opening 2064 mm).

Opening left (SX) - single-leaf door Opening right (DX) - single-leaf door

66

L -7

1

25

75 70

64 136

®

128

SECTIONSGlazed REI 60 single-leaf doors, aluminium

Net passage = L-128


25

170 N

et pass

age =

H -

64

Conce

ale

d f

ram

e p

ass

age =

wall

openin

g =

H

25

A-A

B-B

FFL

170

880

B

A A

B

®

129

66

25

75 70

L2 -

15

L1 -

15

64 136

Glazed REI 60 double-leaf door, of aluminium profiles in accordance with UNI9723 consisting of:❏ Fireproof frame construction GLAZED 60 minutes, made of cold profiled steel tubing system 1,5 mm thickness,

insulated inside with a non-organic silicate compound without asbestos, provided with rebates for self-expandingand rubber gaskets. Total thickness of profile 70 mm.




be ordered seperately.❏ Maximum dimensions 2740 x 2630 mm.❏ Mimimum dimension for leaf with:

asymmetric leaves symmetric leavesAnti-panic crossbar Twist Taurus BM for main leaf min 900 mm min 750 mmAnti-panic crossbar Twist Taurus A for secondary leaf min 600 mm min 750 mmAnti-panic crossbar Corni Push-bar BM for main leaf min 900 mm min 750 mmAnti-panic crossbar Corni Push-bar A for secondary leaf min 600 mm min 750 mmN.B.- The colours available as standard finishes are listed on the “surface treatment” page of the current catalogue.- FFL = Finished floor level.The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of2000 mm. (= wall opening 2064 mm).

SPECIFICATIONS/ENCUMBRANCESGlazed REI 60 double-leaf doors, aluminium



Secondary leaf

®

130

SECTIONSGlazed REI 60 double-leaf doors, aluminium

A-A

B-B

FFL

170

25

Net pass

age =

H-6

4

Conce

ale

d f

ram

e p

ass

age =

wall

openin

g =

H


L2 L1

25

Passage main leaf = L1 -72.5

Net passage = L-128

880

170

B

A A

B

®

131

Glazed complex REI 60 door, of aluminium profiles in accordance with UNI9723 consisting of:

❏ Fireproof frame construction GLAZED 60 minutes, made of cold profiled steel tubing system 1,5 mm thickness,insulated inside with a non-organic silicate compound without asbestos, provided with rebates for self-expandingand rubber gaskets. Total thickness of profile 70 mm.


in combination with a PUSH handle.❏ Overhead door closer for the self-closing of leaf.❏ Self-locking mechanism on secondary leaf and sequencer in sight for double leaf doors.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total


be ordered seperately.❏ Mimimum dimension for leaf with:

asymmetric leaves symmetric leavesAnti-panic crossbar Twist Taurus BM for main leaf min 900 mm min 750 mmAnti-panic crossbar Twist Taurus A for secondary leaf min 600 mm min 750 mmAnti-panic crossbar Corni Push-bar BM for main leaf min 900 mm min 750 mmAnti-panic crossbar Corni Push-bar A for secondary leaf min 600 mm min 750 mm


The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of2000 mm. (= H1 = 2085 mm).

SPECIFICATIONS/SECTIONSGlazed complex REI 60 doors, aluminium

A-A

25

L3

Net passage = L1- 170


L1

®

132

SECTIONSGlazed complex REI 60 doors, aluminium

FFL

C-C

B-B

25

L2


Pass. = L1 -170

L1

Net pass

age =

H1 -

85

H1

H2

Conce

ale

d f

ram

e p

ass

age =

wall

openin

g =

H

25

170

880

170

C

C

B A A B

®

133

INSTALLATIONSGlazed REI 60 doors, aluminium / Horizontal sections

Corridor assemble2


3

70

128


60 min. glass(integrity andinsulation)


Screw TC 4,8 x 19


Seal


1

®

134

INSTALLATIONSGlazed REI 60 doors, aluminium / Vertical sections

Corridor assemble2

70

128

Wall

open

ing =

conc

eale

d f

ram

e pass

age


Screw TC 4,8 x 19



3

Seal


1

60 min. glass (integrity and insulation)

®

135

SPECIFICATIONS/ENCUMBRANCESGlazed REI 90 and REI 120 single-leaf doors, aluminium

Glazed REI 90 and REI 120 single-leaf door, of aluminium profiles in accordance with UNI9723 consisting of:❏ Fireproof frame construction GLAZED 90 or 120 minutes, made of cold profiled steel tubing system 1,5 mm


❏ Heavy steel hinges 3 wings fixed with screws to the frame, ball-bearing type with stainless steel pivot.❏ Self-latching lock release by rotation of handle.❏ Yale lock cylinder in nickle bronze.❏ Stainless steel fire proof door handle fitted at a height of 1040 mm above the finished floor and at 965 mm

in combination with a PUSH handle.❏ Overhead doorcloser for the self-closing leaf.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total


be ordered seperately.❏ Maximum dimensions: 1250 x 2400 mm 1320 x 2374 mm.❏ Minimum dimension for leaf with anti-panic crossbar: L = 650mm


WARNING: the high weight of glazed REI 90 and REI 120 fire rated doors (130 kg/m2 of wall opening for REI 90 and 140kg/m2 for REI 120) in bigger dimensions might create difficulties to the operator, particularly to weak people like handicapped,sick or older persons. It is important to consider this factor so to destinate the doors to adeguate places and/or adapt differentoperaticve conditions i.e. the keeping normally open the leaves by means of electromagnets.


Opening left (SX) - single-leaf door Opening right (DX) - single-leaf door

64 161

9575

L- 7

1

25

66

®

136

SECTIONSGlazed REI 90 and REI 120 single-leaf doors, aluminium

FFL

B-B25

170

Net

pass

age

= H

-64

Conce

ale

d f

ram

e p

ass

age =

wall

openin

g =

H

A-A



25

170

880

B

A A

B

®

137

SPECIFICATIONS/ENCUMBRANCESGlazed REI 90 and REI 120 double-leaf doors, aluminium


Main leafSecondary leafMain leaf Secondary leaf

Glazed REI 90 and REI 120 double-leaf door, of aluminium profiles in accordance withUNI9723 consisting of:❏ Fireproof frame construction GLAZED 90 or 120 minutes, made of cold profiled steel tubing system 1,5 mm



in combination with a PUSH handle.❏ Overhead doorcloser for the self-closing leaf.❏ Self-locking mechanism on secondary leaf and sequencer in sight for double leaf doors.❏ Self expanding and rubber gaskets.❏ Extra clear panes of fire proof float glass interposed with immflammable thermally expanding material, total


be ordered seperately.❏ Maximum dimensions 2400 x 2400 mm.❏ Mimimum dimension for leaf with:



WARNING: the high weight of glazed REI 90 and REI 120 fire rated doors (130 kg/m2 of wall opening for REI90 and 140 kg/m2 for REI 120) in bigger dimensions might create difficulties to the operator, particularly to weakpeople like handicapped, sick or older persons. It is important to consider this factor so to destinate the doors toadeguate places and/or adapt different operaticve conditions i.e. the keeping normally open the leaves by meansof electromagnets.

The client must be aware that according to decrees 626 dated 19.09.1994 and 242 dated19.03.1996 all doors used for emergency ways or exits must have a minimum height of2000 mm. (= wall opening 2064 mm).

L2 -

15

L1 -

15

9575

25

66

64 161

®

138

SECTIONSGlazed REI 90 and REI 120 double-leaf doors, aluminium

A-A

25

Passage main leaf = L1 -72.5


L1L2


FFL

B-B

170

25

Net

pass

age

= H

-64

Conc

eale

d f

ram

e pass

age

= w

all

open

ing =

H

880

170

B

A A

B

®

139

SPECIFICATION/SECTIONSGlazed complex REI 90 and REI 120 doors, aluminium

Glazed complex REI 90 and REI 120 door, of aluminium profiles in accordance with UNI9723 consisting of:❏ Fireproof frame construction GLAZED 90 or 120 minutes, made of cold profiled steel tubing system 1,5 mm





be ordered seperately.❏ Mimimum dimension for leaf with:



WARNING: the high weight of glazed REI 90 and REI 120 fire rated doors (130 kg/m2 of wall opening for REI90 and 140 kg/m2 for REI 120) in bigger dimensions might create difficulties to the operator, particularly to weakpeople like handicapped, sick or older persons.It is important to consider this factor so to destinate the doors toadeguate places and/or adapt different operaticve conditions i.e. the keeping normally open the leaves by meansof electromagnets.


25

L3

A-A


Net passage = L1- 170

L1

®

140

SECTIONSGlazed complex REI 90 and REI 120 doors, aluminium

170

170

880

B-B

25

L2


Pass. = L1 -170

L1

Net pass

age =

H1 -

85

H1 C

once

ale

d f

ram

e p

ass

age =

wall

openin

g =

H

C-C

H2

25

FFL

C

C

B A A B

® INSTALLATIONSGlazed REI 90 and REI 120 doors, aluminium/Horizontal sections

141

2

3

95

128

Corridor assemble


90 and 120min. glass(integrity andinsulation)


Screw TC 4,8 x 19



1Externalrest assemble

Seal

®INSTALLATIONSGlazed REI 90 and REI 120 doors, aluminium/Vertical sections

142

2

95

128

Corridor assemble

Wall

openin

g =

conce

ale

d f

ram

e p

ass

age Concealed frame of galvanised tubular

Screw TC 4,8 x 19


Seal


90 and 120 min. glass(integrity and insulation)

1

3Internalrest assemble

®

143

SPECIFICATIONS/SECTIONSGlazed firm steel windows type REI 60

Glazed firm steel window with glass type REI 60 to be built into the wall consisting of:

❏ Frame made of steel tubular 50 x 30 mm with glass holding profiles and aerostop gasket 10 x 3 mm.❏ Fire rated glass, supplied not assembled, composed of float glass layered with self-expanding fire resisting

material, total thickness approx. 21 mm.❏ Preparation for fixing with bolts and with mortar (does not remain in sight).❏ Finishing of frame with green primer.❏ Maximum dimensions: 1200 x 2100 mm.❏ NOT CERTIFIED VERSION. Goods supplied with the certificate of glass producer only, without conformity

declaration and metallic label.

B

A A

B

Wall

openin

g H

55

B-B

A-A

Wall opening L

55

50

®

144

SPECIFICATIONS/SECTIONSGlazed firm steel windows type REI 120

Glazed firm steel window with glass type REI 120 to be built into the wall consisting of:

❏ Frame made of steel tubular 80 x 30 mm with glass holding profiles and aerostop gasket 10 x 3 mm.❏ Fire rated glass, supplied not assembled, composed of float glass layered with self-expanding fire resisting

material, total thickness approx. 52 mm.❏ Preparation for fixing with bolts and with mortar (does not remain in sight).❏ Finishing of frame with green primer.❏ Maximum dimensions: 1200 x 2100 mm.❏ NOT CERTIFIED VERSION. Goods supplied with the certificate of glass producer only, without conformity

declaration and metallic label.

55

Wall opening L

55

Wall

openin

g H

B-B

A-A

B

A A

B

80

® SPECIFICATIONS/SECTIONSGlazed firm steel windows type REI 30 or REI 60

Glazed firm steel window to install on sub-frame with glasstype REI 30 or REI 60 consisting of:

❏ Cold formed tubular steel structural profile 15/10 mm, internallyinsulated with asbestos-free silicate based inorganic material. Traversesand/or other dividers will be installed according to our criteria. Totalthickness of the element 50 mm.

❏ Fire rated glass, supplied not assembled, composed of very clear floatglass layered with self-expanding fire resisting material, total thicknessapprox. 23 mm.

❏ Special finishing by varnishing with thermo-hardened powders, colourto choice among our range (see page “surface treatment”).

❏ Sub-frame made of galvanised tubular with brackets to fix by mortar,to order separately.

❏ NOT CERTIFIED VERSION. Goods supplied with the certificate of glassproducer only, without conformity declaration and metallic label.

A-A

B-B

Sub-frame passage L25

Sub-f

ram

e p

ass

age H

25

Externalrest assemble1

Corridorassemble2

Internalrest assemble3

B

A A

B

145

50

74

®

146

SPECIFICATIONS/SECTIONSGlazed firm aluminium windows type REI 60, REI 90 or REI 120

25 Sub-frame passage L

A-A

Externalrest assemble1

Corridorassemble2

Internalrest assemble3

B-B

25Su

b-f

ram

e pass

age

H

Glazed firm aluminium window type REI 60, REI 90 or REI 120(M.I. Circ. 91) installed on sub-frame consisting of:❏ Fixed glass fire proof elements REI 60 or REI 90 or REI 120 constructed in special

steel/aluminium profiles. Traverses and/or other dividers will be installedaccording to our criteria.

❏ Fire rated glass, supplied not assembled, composed of very clear float glasslayered with self-expanding fire resisting material, total thickness approx. 23mm for REI 60, approx. 46 mm for REI 90 and approx. 24 mm for REI 120.

❏ Special finishing by varnishing with thermo-hardened powders , colour to choiceamong our range (see page “surface treatment”).

❏ Sub-frame made of galvanised tubular with brackets to fix by mortar, to order separately.❏ CERTIFIED VERSION according to the “circolare 91” up to a dimension of 1000

x 2200, goods supplied without metallic label and with the conformity declaration.

For bigger dimensions supplied not certified, with the certificate of the glassproducer only and without conformity declaration and without metallic label.

B

A A

B

64

*

*......for REI 60 = 70 mm for REI 90 = 95 mm for REI 120 = 95 mm

s.p.a. Corso Trento, 2/A I-38061 ALA (TN) / ITALYPhone +39 0 464 678 300 Fax +39 0 464 679 025 web www.ninz.it e-mail [email protected]

5002009/2-11/08-C10

c10_11-08_completo.pdf

Documents