cable assemblies - wagner companiescable assemblies 600 series and 700 series cable assemblies for...
TRANSCRIPT
128 ISO 9001:2015 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order – requiring a minimum quantity and a longer lead time. Visit shop.wagnercompanies.com for availability.
Cable Assemblies600 Series and 700 Series Cable AssembliesFor outside-of-post to inside-of-post applications, use the 600 or 700 Series (or 672 or 773 Series on page 129):
If wood posts, use the 601 Series. The tensioning device is a 31/2" long Invisiware® Receiver, which installs fl ush through the wood post on one end. A Push-Lock™ Lag is lagged into the other end. If 1 1/2" metal posts, use the 702 Series; if 2", use the 703 Series.The tensioning device is a 1 1/2" (or 2") long Invisiware Receiver, which installs fl ush through the metal post on one end. A Push-Lock Threaded Bolt is threaded into the other end.
1/8" Cable 3/16" CableCable
Length WOOD POST1.50"
METAL POST2"
METAL POST WOOD POST1.50"
METAL POST2"
METAL POST5' CR601-05 CR702-05 CR703-05 CR6016-05 CR7026-05 CR7036-0510' CR601-10 CR702-10 CR703-10 CR6016-10 CR7026-10 CR7036-1015' CR601-15 CR702-15 CR703-15 CR6016-15 CR7026-15 CR7036-1520' CR601-20 CR702-20 CR703-20 CR6016-20 CR7026-20 CR7036-2025' CR601-25 CR702-25 CR703-25 CR6016-25 CR7026-25 CR7036-2530' CR601-30 CR6016-3040' CR601-40 CR6016-4050' CR601-50 CR6016-50
For runs with two turns, use 672 or 773 Series shown on page 129.
Adjust-A-Body with Threaded Eye
1/8" or 3/16" Stainless
Steel Cable
Push-Lock Threaded Eye
Pre-attached Swaging Ferrule
CRSC6Screw
CRSC6Screw
500 Series
500 Series Cable AssembliesFor stairs, use the 500 Series – or the 200 Series with beveled washers:Use with CRLE6 Lag Eye for wood posts, CRLE6L extended length Lag Eye for wood posts with composite sleeves having an outside diameter of greater than 4 1/2", or CRTT6Bthreaded tab for metal posts.The tensioning device is an Adjust-A-Body® with Threaded Eye, which attaches via mounting screw to the lag eye or threaded tab. A Push-Lock with Threaded Eye attaches the same way to the other end.
1/8" Cable 3/16" Cable
Cable Length ANY TYPE POST ANY TYPE POSTWood Post
Add
Wood Post with Composite Sleeve
AddMetal Post
Add5' CR500-05 CR5006-05
Two CRLE6 Lag Eyes Per
Kit
Two CRLE6L Extended
Length Lag Eyes Per Kit
Two CRTT6BThreaded
Tabs Per Kit
10' CR500-10 CR5006-1015' CR500-15 CR5006-1520' CR500-20 CR5006-2025' CR500-25 CR5006-2530' CR500-30 CR5006-3040' CR500-40 CR5006-4050' CR500-50 CR5006-50
Invisiware Receiver
1/8" or 3/16" Stainless
Steel Cable
Push-Lock Threaded Bolt
Delrin Washer for Use with Metal Post
Pre-attached Swaging Stud
Invisiware Receiver
1/8" or 3/16" Stainless
Steel Cable
Push-Lock Lag
Stainless Steel Washer for Use with Wood Post
Pre-attached Swaging Stud
600 Series
700 Series
Cable Railing Assemblies – Ready to Install