cable junctions- logic simple
TRANSCRIPT
V10
Drawn by Bernard
5/10/2009 Feuille 1 /1
N/D
Z.I Perwez, B-1360 Perwez, BelgiumTel +32 81 26 50 80 Fax +32 81 26 50 90
Email [email protected]
www.ocea.be
Cable Junctions- LogicSimple
Cables arriving from the control panel - plant room
The connections between motor cable and the cables from the control panel
(5 x 1.5mm² + 24VDC power supply) are to soldered and be made in a resin sealed junction box
The cables must be in a manhole or chamber so that easy access is available.
Water tight corrugated pipe which must go above the water level.Pipe must be fixed to the sleeve with a stainless steel color clamp.
This scenario applies to paved or other types of pool surrounds. The motor cable does not exceed 3M.Avoid sharp bends in the pipes.