cable tray / ladder / aluminum nema load class: 16b / · pdf file(loading, finish and...
TRANSCRIPT
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. B4A
Classified by UL as equipment grounding conductors per NEC 392.7.
B4A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayB4A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.00 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 4.12” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 12’ Long
B4A 12 - 24 - 144RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
B4
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
120 = 10’144 = 12’
ORDERING DATA EXAMPLE:
NEMA Load Class: 16B / 12C CSA Load Class: D1-3m
POWER-TRAY RAIL DATA RAIL TYPE: B4A
SPAN (ft) 6 8 10 12 14 16
MAX LOAD (lbs/ft) 487 284 181 126 93 71
DEFLECTION MULTIPLIER 0.001 0.003 0.008 0.016 0.030 0.052LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 4.12”Load Depth: 3.05”
4.12"
3.06" TRAY WIDTH
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO.ML4A
Classified by UL as equipment grounding conductors per NEC 392.7.
ML4A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayML4A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: .60 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 3.95” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 12’ Long
ML4 A 12 - 24 - 144
ORDERING DATA EXAMPLE:
TRAY WIDTH
NEMA Load Class: 8B CSA Load Class: 123 kg/m 3.7
co
nn
ecto
r
Siderail: 3.95”Load Depth: 3.08”
LoA
D c
HA
rt*
rUnG SPAce
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MAterIAL
A = ALuMINuM 6063 - T6 ALLOY
rAIL SerIeS
ML4
trAY WIDtH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
trAYLenGtH
144 = 12’
PoWer-trAY rAIL DAtA rAIL tYPe: ML4A
SPAN (ft) 6 8 10 12
MAX LOAD (lbs/ft) 200 113 81 76
DEFLECTION MULTIPLIER 0.0015 0.0047 0.011 0.024
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO.MB4A
Classified by UL as equipment grounding conductors per NEC 392.7.
MB4A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayMB4A Series Cable Tray / Ladder / Aluminum
1/2RUNG
SPACING
RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.50 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 4.18” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
MB4 A 06 - 24 - 144
ORDERING DATA EXAMPLE:
NEMA Load Class: 20A CSA Load Class: E-3m
co
nn
ecto
r
Siderail: 4.18”Load Depth: 3.08”
LoA
D c
HA
rt*
rUnG SPAce
06 = 6”09 = 9”12 = 12”04 = VENTEDSB = SOLID BOTTOM
MAterIAL
A = ALuMINuM 6063 - T6 ALLOY
rAIL SerIeS
MB4
trAY WIDtH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
trAYLenGtH
144 = 12’240 = 20’
PoWer-trAY rAIL DAtA rAIL tYPe: MB4A
SPAN (ft) 10 12 14 16 18 20
MAX LOAD (lbs/ft) 224 156 114 88 69 56
DEFLECTION MULTIPLIER 0.006 0.012 0.022 0.038 0.061 0.093
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. L7A
Classified by UL as equipment grounding conductors per NEC 392.7.
L7A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayL7A Series Cable Tray / Ladder / Aluminum
1/2RUNG
SPACING
RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 0.60 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 7.5” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
L7A 06 - 24 - 144
ORDERING DATA EXAMPLE:
7.50" 6.41"
.75"
TRAY WIDTH
NEMA Load Class: 12B CSA Load Class: 182 kg/m 3.7m
co
nn
ecto
r
Siderail: 7.50”Load Depth: 6.48”
PoWer-trAY rAIL DAtA rAIL tYPe: L7A
SPAN (ft) 6 8 10 12
MAX LOAD (lbs/ft) 209 123 89 77
DEFLECTION MULTIPLIER 0.0047 0.012 0.026 0.029LoA
D c
HA
rt*
rUnG SPAce
06 = 6”09 = 9”12 = 12”04 = VENTEDSB = SOLID BOTTOM
MAterIAL
A = ALuMINuM 6063 - T6 ALLOY
rAIL SerIeS
L7
trAY WIDtH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
trAYLenGtH
144 = 12’
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. L6A
Classified by UL as equipment grounding conductors per NEC 392.7.
L6A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayL6A Series Cable Tray / Ladder / Aluminum
1/2RUNG
SPACING
RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 0.60 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 5.88” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
L6A 06 - 24 - 144
ORDERING DATA EXAMPLE:
NEMA Load Class: 12B CSA Load Class: 162 kg/m 3.7m
co
nn
ecto
r
Siderail: 5.88”Load Depth: 5.02”
PoWer-trAY rAIL DAtA rAIL tYPe: L6A
SPAN (ft) 6 8 10 12
MAX LOAD (lbs/ft) 207 123 89 77
DEFLECTION MULTIPLIER 0.0047 0.012 0.026 0.029LoA
D c
HA
rt*
rUnG SPAce
06 = 6”09 = 9”12 = 12”04 = VENTEDSB = SOLID BOTTOM
MAterIAL
A = ALuMINuM 6063 - T6 ALLOY
rAIL SerIeS
L6
trAY WIDtH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
trAYLenGtH
144 = 12’
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. L5A
Classified by UL as equipment grounding conductors per NEC 392.7.
L5A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayL5A Series Cable Tray / Ladder / Aluminum
1/2RUNG
SPACING
RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 0.60 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 5.88” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
L5A 06 - 24 - 144
ORDERING DATA EXAMPLE:
NEMA Load Class: 12B CSA Load Class: 121 kg/m 3.7m
co
nn
ecto
r
Siderail: 4.88”Load Depth: 4.02”
PoWer-trAY rAIL DAtA rAIL tYPe: L5A
SPAN (ft) 6 8 10 12
MAX LOAD (lbs/ft) 205 123 89 75
DEFLECTION MULTIPLIER 0.0047 0.012 0.026 0.029LoA
D c
HA
rt*
rUnG SPAce
06 = 6”09 = 9”12 = 12”04 = VENTEDSB = SOLID BOTTOM
MAterIAL
A = ALuMINuM 6063 - T6 ALLOY
rAIL SerIeS
L5
trAY WIDtH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
trAYLenGtH
144 = 12’
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. L4A
Classified by UL as equipment grounding conductors per NEC 392.7.
L4A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayL4A Series Cable Tray / Ladder / Aluminum
1/2RUNG
SPACING
RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 0.40 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 3.88” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
L4A 06 - 24 - 144
ORDERING DATA EXAMPLE:
NEMA Load Class: 8B CSA Load Class: N/A
co
nn
ecto
r
Siderail: 3.88”Load Depth: 3.02”
PoWer-trAY rAIL DAtA rAIL tYPe: L4A
SPAN (ft) 6 8 10 12
MAX LOAD (lbs/ft) 135 76 44 27
DEFLECTION MULTIPLIER 0.002 0.006 0.015 0.032LoA
D c
HA
rt*
.75"
3.88" 2.97" TRAY WIDTH
rUnG SPAce
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MAterIAL
A = ALuMINuM 6063 - T6 ALLOY
rAIL SerIeS
L4
trAY WIDtH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
trAYLenGtH
144 = 12’
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. F8A
Classified by UL as equipment grounding conductors per NEC 392.7.
F8A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayF8A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 2.00 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 8” High Ladder, Aluminum, 09” Rung Spacing, 24” Wide, 30’ Long
F8A 09 - 24 - 360RUNG SPACE
09 = 9” 12 = 12”
MATERIAL
A = Aluminum 6063 - T6 Alloy
RAIL SERIES
F8
TRAY WIDTH
12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
TRAYLENGTH
360 = 30ft.300 = 25ft.
ORDERING DATA EXAMPLE:
NEMA Load Class: 20C + CSA Load Class: 240 kg/m 9.1m
POWER-TRAY RAIL DATA RAIL TYPE: F8A
SPAN (ft) 20 22 24 26 28 30 40
MAX LOAD (lbs/ft) 363 300 252 215 185 161 101
DEFLECTION MULTIPLIER 0.007 0.0010 0.013 0.019 0.025 0.033 0.146 LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 8.00”Load Depth: 6.18”
18"
7.25"
3/8” ALUMINUM
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. E7A
Classified by UL as equipment grounding conductors per NEC 392.7.
E7A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayE7A Series Cable Tray / Ladder / Aluminum
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 2.00 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 7.40” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 30’ Long
E7A 12 - 24 - 360RUNG SPACE
09 = 9” 12 = 12”
RAIL SERIES
E7A = 7.40” 6063 -T6 Aluminum
TRAY WIDTH
12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
TRAYLENGTH
300 = 25ft.360 = 30ft.
ORDERING DATA EXAMPLE:
NEMA Load Class: 20C + CSA Load Class: 152 kg/m 9.1m
Co
NN
ECTo
R
Siderail: 7.40”Load Depth: 6.23”
PoWER-TRAY RAIL DATA RAIL TYPE: E7A
SPAN (ft) 20 22 24 26 28 30
MAX LOAD (lbs/ft) 232 192 161 136 117 102
DEFLECTION MULTIPLIER 0.011 0.016 0.023 0.031 0.042 0.055LoA
D C
HA
RT*
TRAY WIDTH 7.40"
2"
6.24"
BUFFALO OFFICE: CORPORATE OFFICE:180 HOPKINS STREET
BUFFALO, NEW YORK 14220 PHONE: (716) 821-1344
FAX: (716) 821-1345
4 INTERNATIONAL DRIVERYEBROOK, NEW YORK 10573
PHONE: (914) 934-2075FAX: (914) 934-2190
NOTES:UNLESS NOTED, DRAWING UNITS ARE IN INCH.1.PARTS TO BE COMERICALLY CLEAN AND FREE OF BURRS, SCRATCHES & OIL.2.
PROJECT/JOB NAME HERE
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MONOSYSTEMS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MONOSYSTEMS INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6063-T6
DRAWN BY
CHECKED BY
DATENAME
DRAWING TITLE:
SIZE
BPART NUMBER: REV
EST. WEIGHT (LBS): 1.01 SCALE: 6:8
AJJB
* *
02/11/13
MID-SPAN SPLICE PLATES
SHEET 1 OF 1
AX-2012
PROJECT:
BUFFALO OFFICE: CORPORATE OFFICE:180 HOPKINS STREET
BUFFALO, NEW YORK 14220 PHONE: (716) 821-1344
FAX: (716) 821-1345
4 INTERNATIONAL DRIVERYEBROOK, NEW YORK 10573
PHONE: (914) 934-2075FAX: (914) 934-2190
NOTES:UNLESS NOTED, DRAWING UNITS ARE IN INCH.1.PARTS TO BE COMERICALLY CLEAN AND FREE OF BURRS, SCRATCHES & OIL.2.
PROJECT/JOB NAME HERE
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MONOSYSTEMS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MONOSYSTEMS INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6063-T6
DRAWN BY
CHECKED BY
DATENAME
DRAWING TITLE:
SIZE
BPART NUMBER: REV
EST. WEIGHT (LBS): 1.01 SCALE: 6:8
AJJB
* *
02/11/13
MID-SPAN SPLICE PLATES
SHEET 1 OF 1
AX-2012
PROJECT:
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. D6A
Classified by UL as equipment grounding conductors per NEC 392.7.
D6A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayD6A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.50 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 6.20” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
D6A 06 - 24 - 144 RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
D6
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
144 = 12’240 = 20’
ORDERING DATA EXAMPLE:
NEMA Load Class: 20C CSA Load Class: E-6m
POWER-TRAY RAIL DATA RAIL TYPE: D6A
SPAN (ft) 14 16 18 20 24
MAX LOAD (lbs/ft) 210 161 127 103 72
DEFLECTION MULTIPLIER 0.0071 0.012 0.019 0.030 0.061 LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 6.19”Load Depth: 5.08”
6.20" 5.10"
2"
TRAY WIDTH
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. C6A
Classified by UL as equipment grounding conductors per NEC 392.7.
C6A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayC6A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.50 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 6.17” High Ladder, Aluminum, 06” Rung Spacing, 24” Wide, 12’ Long
C6A 06 - 24 - 144RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
C6
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
144 = 12’240 = 20’288 = 24’
ORDERING DATA EXAMPLE:
NEMA Load Class: 20B/16C CSA Load Class: E-6m
POWER-TRAY RAIL DATA RAIL TYPE: C6A
SPAN (ft) 12 14 16 18 20 24
MAX LOAD (lbs/ft) 233 171 131 104 84 69
DEFLECTION MULTIPLIER 0.0043 0.008 0.014 0.022 0.033 0.049LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 6.17”Load Depth: 5.06”
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. C5A
Classified by UL as equipment grounding conductors per NEC 392.7.
C5A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayC5A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.50 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 5.06” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 12’ Long
C5A 12 - 24 - 144RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
C5
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
144 = 12’240 = 20’
ORDERING DATA EXAMPLE:
NEMA Load Class: 20B/16C CSA Load Class: E-3m
POWER-TRAY RAIL DATA RAIL TYPE: C5A
SPAN (ft) 10 12 14 16 18 20
MAX LOAD (lbs/ft) 310 215 158 121 96 77
DEFLECTION MULTIPLIER 0.0035 0.0079 0.014 0.023 0.037 0.057LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 5.06”Load Depth: 3.96”
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. C4A
Classified by UL as equipment grounding conductors per NEC 392.7.
C4A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayC4A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.50 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 4.21” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 12’ Long
C4A 12 - 24 - 144RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
C4
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
144 = 12’240 = 20’
ORDERING DATA EXAMPLE:
NEMA Load Class: 20B/16C CSA Load Class: E-6m
POWER-TRAY RAIL DATA RAIL TYPE: C4A
SPAN (ft) 10 12 14 16 18 20
MAX LOAD (lbs/ft) 320 222 163 125 99 80
DEFLECTION MULTIPLIER 0.005 0.009 0.017 0.030 0.047 0.072LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 4.20”Load Depth: 3.08”
TRAY WIDTH
TRAY WIDTH
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. B6A
Classified by UL as equipment grounding conductors per NEC 392.7.
B6A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayB6A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.00 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 6.12” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 12’ Long
B6A 12 - 24 - 144RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
B6
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
144 = 12’240 = 20’
ORDERING DATA EXAMPLE:
NEMA Load Class: 20A/16B CSA Load Class: D1-6m
POWER-TRAY RAIL DATA RAIL TYPE: B6A
SPAN (ft) 10 12 14 16 18 20
MAX LOAD (lbs/ft) 204 142 104 80 63 51
DEFLECTION MULTIPLIER 0.0028 0.006 0.011 0.019 0.03 0.045LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 6.12”Load Depth: 5.04”
TRAY WIDTH
TRAY WIDTH
L
4 International Drive Rye Brook, NY 10573
Toll Free: 1 888.764.7681Phone: 914.934.2075
Fax: 914.934.2190MonoSystems.com
1/2013 DOCUMENT REF. NO. B5A
Classified by UL as equipment grounding conductors per NEC 392.7.
B5A/Straight SectionManufactured in the USA by MonoSystems, Inc.
™PowerTrayB5A Series Cable Tray / Ladder / Aluminum
RUNGSPACING
1/2 RUNGSPACING
General InformationTRAY DESIGN: Construction and markings are per the latest edition of NEMA Standards Pub. VE1, CSA C22.2 No. 126.
TRAY GROUNDING CAPABILITY: Classified as an equipment grounding conductor per N.E.C. 392.7 with a maximum 1600 ampere rating. UL Cross Sectional area: 1.00 in2
CONNECTORS: Supplied in pairs with hardware. Splice resistance is less than 0.00033 ohms. Standard hardware: 3/8 in. cadmium-plated with clear zinc topcoat. Stainless steel hardware is available upon request.
MonoSystems trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2
Material: Aluminum 6063-T6 Alloy
* Values are based on simple beam tests per NEMA VE 1 on 36” wide cable tray with rungs spaced on 12” centers. Cable trays will support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed. Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.
Power-Tray, 5” High Ladder, Aluminum, 12” Rung Spacing, 24” Wide, 12’ Long
B5 A 12 - 24 - 144RUNG SPACE
06 = 6”09 = 9”12 = 12”18 = 18”04 = VENTEDSB = SOLID BOTTOM
MATERIAL
A = ALuMINuM 6063 - T6 ALLOY
RAIL SERIES
B5
TRAY WIDTH
06 - 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”42 = 42”
TRAYLENGTH
144 = 12’240 = 20’
ORDERING DATA EXAMPLE:
NEMA Load Class: 20A/12C CSA Load Class: D1-6m
POWER-TRAY RAIL DATA RAIL TYPE: B5A
SPAN (ft) 10 12 14 16 18 20
MAX LOAD (lbs/ft) 200 139 102 78 62 50
DEFLECTION MULTIPLIER 0.0049 0.010 0.019 0.032 0.051 0.078LOA
D C
HA
RT*
CO
NN
ECTO
R
Siderail: 5.00”Load Depth: 3.93”