cable tray - unitech-ikk.com · 5 specialized factory for steel products co. ltd specialized...

CABLE TRAYCATALOGUE

www.ikkgroup.com

- About SFSP

- Cable Trays

- Cable Tray Fittings

- Cable Tray Accessories

- Cable Tray Support System

- Concrete Support Anchors

- How to Order

- Contact Us

INDEXCable Tray Catalogue

4

22

38

52

62

70

84

88

2

www.sfsp-ikk.com

3

ABOUTSFSP

4

Specialized/Sigma Factory for Steel Products (SFSP) was first established in KSA in 1989 and has been expanding ever since through a variety of products and through its geographical presence.Production at the factory is observed using modern practices of manufacturing methods in the steel construction industry with a definite compliance to international standards of fabrication. SFSP has manufacturing facilities in KSA, UAE, Egypt, and Lebanon. SFSP adapts quickly and easily to market demands and requirements. The factory is operating a top of the line production machinery, fully automated with highest technology to ensure quality and maintain speed with delicacy.

Quality at SFSP is uncompromised; the factories have been able to acquire ISO 9001: 2008 Quality Management System, ISO 14001:2004 Environmental Management certified factory, and OHSAS 18001:2007 Occupational, Health and Safety Management factory.

HOT-DIP GALVANIZATIONSFSP has an in-house state of the art Hot-Dip Galvanization facility, which permits a full control of the quality of its finished products, offering better services to our clients globally.

Specialized Factory for Steel Products Co. LtdSigma Factory for Steel Productswww.sfsp-ikk.com

5

Specialized Factory for Steel Products Co. Ltdwww.sfsp-ikk.com

Specialized Factory for Steel Products Co., ltd, which is part of Isam Khairi Kabbani Group of companies is a leading fabricator of steel construction products serving the kingdom of Saudi Arabia since 1989.

The factory operates under TQM ISO modules, using the latest modern technology in the steel fabrication and manufacturing industry in conformity with International standards for safety and in compliance with the environmental regulations in the Kingdom.

The factory has inaugurated its new manufacturing facilities which is located in the 3rd Industrial Area of Jeddah with a total built facilities of 37,000 squared meters.

The facilities include two manufacturing areas, a hot dip galvanization advanced section, warehousing areas and administrative building. The project is an advanced environmental low emissions factory built with a definite consideration of the safety of its workers and visitors.

6


A crucial factor in the job of a factory is to provide continuous technical services and consultations.That’s why SFSP has invested in a professional team of researchers and specialists.

SFSP has recruited brilliant graduates and experienced engineers having the appropriate knowhow on the on latest technology changes and development in the steel building materials industry.

The product range is developed and updated according to the relevant standards of fabrication across markets, whilst the business processes are evaluated to achieve maximum efficiency.

SFSP R&D Core Objectives- Carry out responsibilities effectively in a safe and healthy work environment.- Develop and implement research programs relevant to the products and solutions introduced and ensure that the

results are communicated clearly in-house and among the clients , concisely and accurately.

Unitech Deutshland GmbH is the design office of Unitech for Building and Construction Materials and is situated in Stuttgart, Germany.

DESIGN AND ENGINEERING OFFICE - GERMANY

TECHNICAL SERVICES

7

SOCIAL RESPONSIBILITY

Being socially responsible is a part of who we are and how we do our business. We aim to provide useful products and services, to provide jobs and development opportunities for our communities, and to gain satisfaction through meaningful work. We make a difference by acting on the values and principles of our societies and we inspire others to do so. At SFSP, we anticipate and reduce threats caused by environmental changes or natural disasters, and we are well adapted to significant social changes. We contribute to a more sustainable society by means of value and support to our consumers, supply chains, and stakeholders. We are keen to identify ways they can improve our impacts on the people and places we work and live in, and thereby become more valuable and valued members of society.

- Organizational governance: We promote accountability and transparency at all levels, thus, promoting responsibility

- Human care: We treat individuals with respect; and make efforts to help members of vulnerable groups

- Labor practices: We provide just, safe and favorable conditions to workers

- Environment: At SFSP, we Identify and improve environmental impacts of our operations, including the resource use of natural resources and waste disposal.

- Fair operating practices: Practicing accountability and fairness in dealings with other businesses

At SFSP, we are committed to continuous improvement – ongoing learning, process review and innovative thinking that foster new initiatives; and better practices. Our environmental programs evolve to meet today’s changing needs while; protecting resources for future; generations.

HEALTH AND SAFETY

The Factory Management regard the health and safety of the employees, clients and all others that may be affected by their operations to be of a major importance.

In support of this, the management promotes health and safety throughout the Factory’s operations and endeavour to engender a positive attitude in all employees towards the prevention of accidents and maintenance of healthy working arrangements.

The Factory satisfies the requirements of the Health, Safety and related legislation by setting out the responsibilities of all levels of staff and the arrangements for carrying out those responsibilities and in particular do what is reasonably practicable to:1. Maintains safe & healthy working conditions.

2. Ensures that all facilities and equipment are safe and properly maintained.

3. Provides products that can be applied and used safely and without risk to health.

4. Provides and maintain working procedures, that are safe and without risk to health, throughout the its operations in respect of:

• The use, handling, storage, transports and disposal of materials and substances.

• The use of factory equipment. • Potential emergency situations, including first aid,

fire and escape of substances.5. Ensure the competence of employees.

The factory is an OHSAS 18001:2007 Occupational, Health and Safety Management certified Factory.

8

SFSP facilities are equipped with the most technologically advanced machinery amongst are Laser Cut Machines, Robot Bending Sets, Welding Robot Sets, sophisticated Cable Management Production Lines, as well as Specialized Industrial Sections for its Hot Dip Galvanization facilities.

ENVIRONMENTAL AWARENESS

SFSP is committed to the following:• Compliance with all statutory and regulatory

requirements related to its activities, products and services and the environmental aspects.

• Identifying quality and environmental objectives by review and audit of the processes both in-house and on-site.

• Formally setting objectives based on the results of the process reviews and their significance in relation to their impact on the environment and the continual improvement of the quality and environmental management system.

• Implementing management programs to achieve these objectives.

• Investing in a well-trained and motivated workforce.• Working closely with suppliers and customers to

ensure mutual understanding and benefits of the environmental aspects consideration.

• Reviewing our policy and objectives as part of the Management Review Process.

• Communicating this policy to all persons working for or on behalf of the organization.

• Preventing and minimizing Pollution to the environment.

SFSP operates under environmental management system certification BS EN ISO 14001:2004 and maintain it through registration and annual review.

9

CNC MACHINES

WELDING ROBOT

SETS

CNC PUNCHING

FIBER LASER CUT

ROBOTIC BENDING

CELL

10

ISO 14001 Certified (Environment Management System)

SFSP CERTIFICATION

11

ISO 18001 Certified (Health & Safety Management system)

SFSP CERTIFICATION

12

ISO 9001 certified (Quality Management System)

SFSP CERTIFICATION

13

BS EN 61537:2007 (KEMA certified for cable management products)

SFSP CERTIFICATION

14

* for SFSP UAE

UL Certification*

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20170811-R38825 Report Reference R38825-20170811

Issue Date 2017-AUGUST-11

Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

Issued to: Sigma Factory for Steel Products Saih Shuaib 3, 4 R/A Dubai Industrial City Opposite DEWA Substation Dubai UNITED ARAB EMIRATES

This is to certify that representative samples of

CHUTE-TYPE FIRE DOORS Chute-type fire door and frame assembly of the insulated type, rated up to and including 2 hr, 450°F Temperature Rise Rating.

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 10B, Fire Tests of Door Assemblies Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product.

15

SFSP PRODUCTS

SFSP produces a variety of products ranging from cable management systems; cable trays, cable ladders, basket trays, trunkings and support systems, to mechanical cladding fixations, steel lintels and block work accessories, plasterers’ beads, expanded metal and block work reinforcement, strut channel systems, pipe clamps & hangers, gypsum profiles as well as garbage and linen chutes. With the introduction of new machines and the enhancement of production methods, SFSP continues to develop its production methods systematically as well as thoroughly. Its design office in Stuttgart, Germany provides a comprehensive design and calculation case studies, enabling the factory to have the safety factors required for the usage of its products.


CABLE TRAYS & ACCESSORIESCable Trays are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrications and finishes.

CABLE LADDERS (WELDED & SWAGED)Cable Ladders of different side heights are available upon request.

BASKET TRAYS & ACCESSORIESSFSP’s Basket Tray systems make connections fast and simple with limited need for tools. Its design allows for continuous airflow, and prevents heating up of cables. SFSP’s Basket Tray comes in a full range of sizes and is made with high-strength welded steel wires.

CABLE TRUNKINGSCable Trunkings and Accessories are offered in a comprehensive range. Mill galvanized, hot-dip galvanized, and powder coated are the various finishes produced in our factories.

UNDERFLOOR TRUNKINGUnderfloor Trunking Systems solutions incorporate a range of products for the distribution of power and data services , it is a coordinated set of containments that protect, segregate, contain, and route cables within a given environment.

16

EXPANDED METALS, PLASTERERS` BEADSExpanded Metals help the formation of joints, protection of corners and resistance against cracks, chips and impact damage.

BLOCK LADDER REINFORCEMENTSFSP ladder and truss types are used for the reinforcement of brick and block masonry to give improved tensile strength to walls subjected to lateral loading e.g. wind and seismic. SFSPblock reinforcements reduces the risk of cracking either at stress concentration around opening.

STEEL LINTELS & BLOCK WORK ACCESSORIESSteel Lintels provide a combination of strength and light weight, resulting in efficient load bearing performance and increased productivity on site. They are characterized by their ease of installation in addition to time as well as money saving.

PIPE CLAMPS & HANGERSPipe Clamps and Hangers from SFSP used in the support of pipes and equipments are manufactured according to the highest standards of fabrication.A diversified choice of Pipe Hangers, Pipe Clamps, EMT Straps, Omega Clamps, Beam Clamps, J and U-Bolts and Threaded Accessories.

MARBLE & GRANITE FIXINGSStangle Cladding Fixation includes design, calculation and production of several types of mechanical fixings and accessories used for cladding purposes. Stainless and galvanized steel are among the various materials used in the fabrication.

DRY WALL & CEILING PROFILESSFSP provides a complete product range for dry wall and ceiling constructions. Studs, Runners, Furring Channels, Ceiling Channels and Wall Angles are among the range of products produced to service the dry wall installers.

GARBAGE & LINEN CHUTESChutes from SFSP are very convenient, simple and low cost method of controlling and disposing of refuse and linen. Chutes meet the most stringent requirements of environmental health and safety. Chutes are used as original equipment in new buildings, such as : Hotels, Hospitals, High Rises and Residential Towers.

C-CHANNEL STRUT SYSTEMSSFSP’s Metal Framing Systems provide an economical solution for electrical, mechanical and industrial supports with a wide variety of applications in the construction industry.Applications: - Pipe and Conduit Supports - Tunnel Pipe Stanchions - Racks and Shelvings - Wall Framings.

CABLE MANAGEMENT SUPPORT SYSTEMSCable Support Systems are well designed to provide necessary support for cable trays, cable ladders and trunkings. Cable supports are manufactured according to common standards from high quality raw materials.

17

SFSP Products are solely distributed by UNITECH for Building and Construction Materials

Isam Kabbani & Partners for Building and Construction Materials Co., Ltd.

Jordan Build Co. for Building & Construction Materials –

UNITECH ME s.a.r.l –

Issam Kabbani Trading Est. –

+971 4 8181925, Ext. 4269+966 13 8590097, Ext. 3214

Isam Kabbani Trading Est.

KSA

Hassan Kabbani for General Contracting Est.

KUWAIT

UNITECH Egypt for Building Materials

EGYPT

JORDAN

Isam Kabbani & Partners Trading Co.

OMAN

LEBANON

BAHRAIN UAE

UAEKSA

All Products Manufactured by SFSP are Solely Distributed by SFSP Sister Companies in the Following Countries

SFSP CUSTUMER SERVICE CALL CENTER

Senegal

Kazakhstan

Spain

France

German yPoland

Greece

Albania

HungaryAustria

Slovakia

Czech RepUkraine

Maldova

Romania

Bulgaria

SerbiaCroatia

Italy

Turkey

Georgia

PortugalTurkmenistan

Afghanistan

Pakistan

Uzbekistan

Tajikistan

IRAN

Tehran

Ashgabat

Kabol

Skakah

Gurayyat

Mak kahAl Taif

BeirutCyprus

SAUDI ARABIA

SYRIA

EGYPT

LEBANON

JORDAN

IRAQ

UAE

BAHRAIN

Najran

Khamis Mushayt

Riyadh

Hail Qassim

Yanbu

Jeddah

Dammam Manama

JubailHafr Al Batin

Gizan

Baha

Ma dinah

Hufuf

Cairo

YEMEN

SUDANChad

Niger

Aqaba

Al Kharj

Amman

Ajman

6th of October

Jebel Ali

TabukLIBYAALGERIA

TUNISIA

Malta

MOROCCO

OMAN

KUWAIT

Tripoli Banghazi

AlgeriaOranTanger

Casablank a

Muscat

Sanaa’

Adan

Khartoum

Salalah

Erbi l

Baku

DubaiSharjah

U A Q

Nigeria

Cameroon

Ethiopia

Djipouti

Eritre a

Somalia

CentralAfrican

Republic

Mali

Burkina Faso

GhanaCote

d’lvoire

Guinea

Mauritania

Benin

Abuja

Stuttgar t

Norway

Birmingha m

Ireland

Sweden

Finland

Denmark

Netherlands

Switzerland

Belgium

Finland

Estonia

Latvia

Lithuania

Azerbaija nArmenia

Belarus

Istanbul

UK

Qatar

IKKGroup of Companies

The IKK Group is a major business institution, serving most of the Arab World in the industrial, construction and trading fields, as well as in specialized maintenance and services.

Today, the IKK Group of Companies is a pioneer in waterproofing, weatherproofing, building material supplies, UPVC and CPVC and high density polyethylene pipes and fittings and several other products for the construction industry.

The Group is also represented in the sanitary products, steel production, kitchen manufacturing, telecommunications, food, decoration, re-insurance and real estate business domain.

Composed of 60 companies, the IKK Group operates through almost 200 divisions, branches and outlets; it is spread over 12 countries, covering all major cities in the region and employing around 13,000 employees.

Our vision is to maintain and improve our leading position as a contractor whose reputation is built on the ability to completely satisfy customers by providing high quality services. As specialists in their respective fields, our teams of professionals are dedicated to a standard of excellence for quality and performance, through continuous development, which will set standards in our industry.We are simply providing solutions for a future of success.

Our mission is to provide our part of the Arab World with local and reliable services in a variety of sectors and products.

To create employment to thousands of personnel and in-house training for hundreds of young Arab graduates in crucial sectors to the benefit of the IKK Group, the graduates themselves and their own communities.

To set a good example of our basic business philosophy: “Hire well, train well, pay well and treat well.”

UNITECH ISAM KABBANI & PARTNERS FOR BUILDING & CONSTRUCTION MATERIALS

Isam Kabbani & Partners for buildings & construction materials co. Ltd (UNITECH) which is part of the IKK group of companies is recognized and acknowledged for the quality and reliability of its products and services as well as for the commitment, professionalism and experience of its employees.

Isam Kabbani & partners for buildings & construction materials co. Ltd (UNITECH) core valuse are to offer value products and services to its clients, to work closely with them in a lasting business partnership that provides an outstanding performance.

A partnership based on trust, harmony, and a hard to beat services and solutions.

Our Factories have acquired, in addition to ISO 9001:2008 Quality Management System, the ISO 14001:2004 Environmental Management System.

Our care for the environment has been translated via Isam Kabbani &partners for buildings &construction materials co. Ltd (UNITECH)’s membership in the US Green Building Council as a Golden Member.

Our VisionUNITECH to be the Customer’s First Choice.

Our MissionWe have the conviction to be the leader in building & construction industry through:- Providing Excellence in Services with Passionate and

Educated Sales Force- Strengthen Culture through Unified Sense of Purpose- Innovative Product Range which is Customer Centric- Reputable and Quality Service Company- Attracting, Engaging and Retaining Talent

18

CABLE MANAGEMENT SYSTEMS

Cable Management Systems` types fittings and accessories from SFSP are manufactured in compliance with :

- IEC 61537:2007- BS EN 61537:2007

International Electrotechnical Commission(Cable management, Cable tray systems and cable ladder systems)

- SASO IEC (61537:2006) Saudi Standard(Cable management, Cable tray systems and cable ladder systems)

- NEMA VE 1 - 2009 National Electrical Manufacturers Association.(Metal Cable Tray Systems)

- NEMA VE 2 - 2006 National Electrical Manufacturers Association.(Metal Cable Tray Installation Guide Lines)

- NEC (ANSI / NFPA 70) National Electric Code(Metal Cable Tray Guide Lines)

SFSP Cable Management Systems, fittings and accessories are manufactured in compliance with international standards. SFSP provides a wide range of products capable of providing the characteristics which respond to the proposed application, along with quality of assembly, speed of installation and cost-saving Cable Management Systems. Calculations are provided by our design office in Stuttgart, Germany.

SFSP Cable Management Systems are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrication and finishing. Cable Management Systems are economical wire and cable management systems designed to support and protect electrical wires and cables.

National Electric Code (NEC) permits Cable Trays in a wide variety of indoor and outdoor applications. The NEC also permits Cable Trays for use as equipment ground conductor.

Cable Management Systems can provide significant advantages in cable filling over other wiring methods.This can provide savings in the size or number of raceways required, thereby, reducing both materialand labor costs. In many cases, NEC permits greater conductor ampacities in Cable Tray Systems than for other wiring methods.

Under certain conditions, the NEC allows “Free Air” rating of large, single conductor power cables (4/0 & larger) in ventilated Cable Management Systems. This can provide significant savings in conductor costs. Cable Management Systems permit much greater spacing between support hangers than most other systems, providing savings in support costs and installation labor.

19

20

www.sfsp-ikk.com

www.sfsp-ikk.com

CABLETRAYS

22

Cable Trays, are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrication and finishing.

This catalogue is designed to be helpful to engineers and contractors in the application and selection of tray products for construction and maintenance.

If a unique application requires a special product not included in this catalogue , SFSP engineering personnel are ready to furnish design consultation and realistic cost estimates. In addition, our know-how is available for your convenience.

23

PRODUCTS RANGE

The different types of tray designs are described below:

Ladder (Cable Ladder)Swaged rounded tubular (Aluminum or Steel) or welded c-channel (steel). A prefabricated metal structure consisting of two side rails connected by individual transverse embers or rungs. Cable Ladder Trays are the most common and the most economical types of trays. They also provide maximum ventilation for cabling.

Swaged Rounded Tubular Welded C-Channel

Perforated Cable Tray (Cable Trays)A prefabricated metal structure consisting of a bottom with openings within the cable bearing surface.Solid bottom Cable Trays completely eliminate cable sagging and offer maximum protection for the cables.

Perforated Cable Tray

Wire Mesh (Basket Tray)Is ideally suitable for light - to medium-duty commercial and industrial applications where space is at a premium. SFSP wire Basket Trays have a fast connection profile for installations requiring long runs of straight Cable Trays lengths. Applications : Network cabling, wiring closets, fiber-to-desktop applications and can often be used in suspended ceiling plenum areas and under computer room flooring.

Wire Mesh

Solid (Cable Trunking)A prefabricated metal structure consisting of a one-piece solid bottom channel section not exceeding 6”(150mm) in width .

Cable Trunking

24

Types Overview and Components

SFSP cable trays and accessories from SFSP are manufactured in compliance with BS EN 61537:2007/BS 5750/BS EN 10130/BS EN 10131/ BS EN 10051 and NEMA standards. And, as per cabling standards CENELEC EN 50173-1; EIA/ITA 568 A; ISO/IEC 11801; 2002.

We manufacture a wide range of products capable of providing the characteristics which respond to the proposed application, along with quality of assembly, speed of installation, and cost-saving cable trays.

Light Duty - LCT - 100Thickness : 1.00 mmSide Height : 50 mm Length : 2440 mm / 3000 mm Width : 50 - 1000 mm

Medium Duty - MCT - 120Thickness : 1.20 mmSide Height : 50 ,75 and 100 mm Length : 2440 mm / 3000 mm Width : 50 - 1000 mm

Heavy Duty - HCT - 150Thickness : 1.50 mmSide Height : 50 ,75 and 100 mm Length : 2440 mm / 3000 mm Width : 50 - 1000 mm

Very Heavy Duty - VCT - 200Thickness : 2.00 mmSide Height : 50 ,75 and 100 mm Length : 2440 mm / 3000 mm Width : 50 - 1000 mm

MATERIALSPre-Galvanized, Hot-Dip Galvanized, Stainless Steel and Aluminium

MATERIAL THICKNESS1.00 mm | 1.20 mm | 1.50 mm | 2.00 mm

TYPES OF SIDE HEIGHTS

STR RFI RFO CTI CTO

Straight Return Flange Inside Return Flange Outside C-Type Inside C-Type Outside

All illustrations, drawings and descriptive material in this publication are of a generally informative nature only, and do not form a complete package of the specifications or description of the goods. Most of the dimensions shown are nominal.

SFSP can make modifications and design, materials or finishes as it deems necessary or desirable.

TYPES OF PERFORATION DIMENSIONS

Serial

Staggered

15

Oblong holes7 x 32

L

W

2525

25 25

327

15

Oblong holes7 x 32

L

W

2525

25 25

327

15

Oblong holes7 x 32

L

W

2525

25 25

327

H

* Other Thickness Available Under Request

25

Materials & Finishes

Materials

Mild Steel - Plain

A. Hot Rolled Steel Plates, Sheets and Coils S235 JR, as per:EN 10025 -2 / DIN 17100 / BS 4360 / ASTM A 653M / ASTM A 1011 / ASTM A 1011-01a JIS 3101 / JIS 3106 / GB 700 / GB / T1591.ASTM A 907 / ASTM A 1018M.ASTM A 570M / ASTM A 572M.B. Cold Rolled Steel DC 01, as per:EN 10130 / DIN 1623, Part 2 / BS 1449:1 / ASTM A366 / ASTM A 1008 / JIS G 3141 / GB 699.EN 10131 / ASTM A 568M

Mild Steel - Galvanized

C. Continuously Pre- Galvanized Hot–Dip Zinc Coated Steel DX 51D + Z, as per: EN 10327 / DIN 17162 / BS 2989/ ASTM A 527M / ASTM A 653M / JIS G 3302.EN 10326/ EN 10142 / ASTM A 526, 527, 528/ ASTM A 146

D. Electro Galvanized Steel (Electrolytic Coating) DC01 + ZE v, as per: EN 10152 / DIN 17163 / ASTM A591 / JIS G 3313 / JIS G 3141/BS 1449:1EN 10131

Aluminum

E. Aluminum 6063 T6

Stainless Steel

F.Austenitic Stainless Steels SS 304 & SS 316, as per: ASTM A 240 /EN 10088-2/ DIN 17400 / BS 1449:2 / ASTM A480 / ASTM A666 / ISO 3506 / EN 10028-7 /JIS G 4304F.1 Stainless Steel Fasteners EN 3506F.2 Stainless Steel Wire BS 1554 ,ASTM A276

Finishes

1- Hot–DIP Galvanization after Fabrication

as per:ASTM A 123 / ASTM A 153 / ISO 1461.BS 729 / DIN 50976

2- Zinc Electroplating after Fabrication

as per:ASTM B633 / EN 12329 / ISO 4042/ BS 1706 / BS 3382 / DIN 50961

3- Powder Coating

Epoxy / Polyester / Epoxy & Polyester

BS 3900 / ISO 2409 / ISO 1519 / ISO 1520

26

Item Code Cable traySupport distance

(m)Load kN/m

SVCTBS_F_00012382

LCT 50 -50 1.00 1.50

width (w) : 50 mm

1.20 1.30

1.50 0.80

2.00 0.40

SVCTBS_F_00071213

LCT 100 -50 1.00 1.50

width (w) : 100 mm

1.20 1.40

1.50 0.90

2.00 0.50

SVCTBS_F_00071193

LCT 150 -50 1.00 1.50

width (w) : 150 mm

1.20 1.40

1.50 0.90

2.00 0.50

SVCTBS_F_00071221

LCT 200 -50 1.00 1.50

width (w) : 200 mm

1.20 1.40

1.50 0.90

2.00 0.50

SVCTBS_F_00097763

LCT 225 -50 1.00 1.50

width (w) : 225 mm

1.20 1.10

1.50 0.70

2.00 0.35

SVCTBS_F_00000992

LCT 300 -50 1.00 0.80

width (w) : 300 mm

1.20 0.55

1.50 0.35

2.00 0.15

SVCTBS_F_00055823

LCT 400 -50 1.00 0.45

width (w) : 400 mm

1.20 0.30

1.50 0.15

SVCTBS_F_00058355

LCT 450 -50 1.00 0.30

width (w) :450 mm

1.20 0.20

1.50 0.10

LCT - 50

(Side Height 50 mm)

Light Duty -1.00 mm Thickness

32 7

25

25

W

50

L

25 25

Thickness : 1.00 mmSide Height : 50 mmLength : 3000 mm Width : 50 - 450 mmSafety : 1.5

Order Example: LCT50 - Side height (h) - Width(w) - Thickness - Side type For more ordering details, please check page 84-85

Width

(mm)

Order Example

Item (h) (w) (t) Type

50 LCT50 050 0050 1 RFI

100 LCT50 050 0100 1 RFI

27


(m)Load kN/m

SVCTBS_F_00012374

MCT 50 - 50 1.00 1.50

width (w) : 50 mm

1.20 1.50

1.50 1.00

2.00 0.48

SVCTBS_F_00145001

MCT 100 - 50 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.10

2.00 0.60

SVCTBS_F_00136443

MCT 150 - 50 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.10

2.00 0.60

SVCTBS_F_00053157

MCT 200 - 50 1.00 1.50

width (w) : 200

1.20 1.50

1.50 1.10

2.00 0.65

SVCTBS_F_00077529

MCT 225 - 50 1.00 1.50

width (w) : 225

1.20 1.50

1.50 1.10

2.00 0.65

SVCTBS_F_00000996

MCT 300 - 50 1.00 1.50

width (w) : 300

1.20 1.00

1.50 0.65

2.00 0.35

SVCTBS_F_00010686

MCT 400 - 50 1.00 0.80

width (w) : 400

1.20 0.50

1.50 0.30

2.00 0.15

SVCTBS_F_00010278

MCT 450 - 50 1.00 0.60

width (w) : 450

1.20 0.40

1.50 0.20

2.00 0.10

MCT - 50

(Side Height 50 mm)

Medium Duty - 1.20 mm Thickness

32 7

25

25

W

50

L

25 25

Thickness : 1.20 mmSide Height : 50 mmLength : 3000 mm Width : 50 - 450 mmSafety : 1.5

Order Example: MCT50 - Side height (h) - Width(w) - Thickness - Side type For more ordering details, please check page 84-85

Width

(mm)

Order Example


50 MCT50 050 0050 2 RFI

100 MCT50 050 0100 2 RFI

28


(m)Load kN/m

SVCTBS_F_00091413

MCT 100 - 75 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.50

2.00 1.15

SVCTBS_F_00011414

MCT 150 - 75 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.20

SVCTBS_F_00012214

MCT 200 - 75 1.00 1.50

width (w) : 200

1.20 1.50

1.50 1.50

2.00 1.20

SVCTBS_F_00199827

MCT 225 - 75 1.00 1.50

width (w) : 225

1.20 1.50

1.50 1.50

2.00 1.20

SVCTBS_F_00000756

MCT 300 - 75 1.00 1.50

width (w) : 300

1.20 1.50

1.50 1.35

2.00 0.75

SVCTBS_F_00010702

MCT 400 - 75 1.00 1.20

width (w) : 400

1.20 1.10

1.50 0.70

2.00 0.35

SVCTBS_F_00010310

MCT 450 - 75 1.00 1.00

width (w) : 450

1.20 0.85

1.50 0.50

2.00 0.25

(Side Height 75 mm)


MCT - 75

32 7

25

25

W

75

L

25 25

Thickness : 1.20 mmSide Height : 75 mmLength : 2440 mm / 3000 mm Width : 100 - 450 mmSafety : 1.5


Width

(mm)

Order Example


50 MCT75 075 0100 2 RFI

100 MCT75 075 0150 2 RFI

29

Item Code Cable traySupport dis-

tance (m)Load kN/m

SVCTBS_F_00001330

MCT 100 - 100 1.00 1.50

width (w) :100 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00050097

MCT 150 - 100 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00012318

MCT 200 - 100 1.00 1.50

width (w) : 200 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00016678

MCT 225 - 100 1.00 1.50

width (w) : 225 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00000814

MCT 300 - 100 1.00 1.50

width (w) : 300 mm

1.20 1.50

1.50 1.50

2.00 1.30

SVCTBS_F_00010462

MCT 400 - 100 1.00 1.20

width (w) : 400 mm

1.20 1.20

1.50 1.20

2.00 0.65

SVCTBS_F_00065369

MCT 450 - 100 1.00 1.00

width (w) : 450 mm

1.20 1.00

1.50 0.90

2.00 0.50

MCT - 100

(Side Height 100 mm)


732

L

100

W

25

25

25 25



Width

(mm)

Order Example


100 MCT100 0100 0100 2 RFI

150 MCT150 0100 0150 2 RFI

30


(m)Load kN/m

SVCTBS_F_00012398

HCT 50 - 50 1.00 1.50

width (w) : 50 mm

1.20 1.50

1.50 1.25

2.00 0.60

SVCTBS_F_00052969

HCT 100 - 50 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.35

2.00 0.75

SVCTBS_F_00057311

HCT 150 - 50 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.40

2.00 0.75

SVCTBS_F_00052961

HCT 200 - 50 1.00 1.50

width (w) : 200

1.20 1.50

1.50 1.45

2.00 0.80

SVCTBS_F_00077385

HCT 225 - 50 1.00 1.50

width (w) : 225

1.20 1.50

1.50 1.45

2.00 0.80

SVCTBS_F_00001000

HCT 300 - 50 1.00 1.50

width (w) : 300

1.20 1.50

1.50 1.30

2.00 0.70

SVCTBS_F_00010690

HCT 400 - 50 1.00 1.50

width (w) : 400

1.20 1.00

1.50 0.65

2.00 0.35

SVCTBS_F_00010282

HCT 450 - 50 1.00 1.20

width (w) : 450

1.20 0.80

1.50 0.50

2.00 0.25

SVCTBS_F_00010406

HCT 500 - 50 1.00 0.95

width (w) : 500

1.20 0.65

1.50 0.35

2.00 0.15

SVCTBS_F_00011770

HCT 600 - 50 1.00 0.60

width (w) : 600

1.20 0.40

1.50 0.20

2.00 0.10

SVCTBS_F_00053673

HCT 700 - 50 1.00 0.40

width (w) : 700

1.20 0.25

1.50 0.10

HCT - 50

32 7

25

25

W

50

L

25 25

Thickness : 1.50mmSide Height : 50 mmLength : 2440 mm / 3000 mm Width : 50 - 700 mmSafety : 1.5

(Side Height 50 mm)

Heavy Duty - 1.50 mm Thickness

Order Example: HCT50 - Side height (h) - Width(w) - Thickness - Side type For more ordering details, please check page 84-85

Width

(mm)

Order Example


50 HCT50 050 0050 3 RFI

100 HCT50 050 0100 3 RFI

31


(m)Load kN/m

SVCTBS_F_00060171

HCT 100 -75 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.50

2.00 1.40

SVCTBS_F_00011430

HCT 150 -75 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00012230

HCT 200 -75 1.00 1.50

width (w) : 200 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00060163

HCT 225 -75 1.00 1.50

width (w) : 225 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00000772

HCT 300 -75 1.00 1.50

width (w) : 300 mm

1.20 1.50

1.50 1.50

2.00 1.45

SVCTBS_F_00010718

HCT 400 -75 1.00 1.50

width (w) : 400 mm

1.20 1.50

1.50 1.40

2.00 0.75

SVCTBS_F_00128473

HCT 450 -75 1.00 1.50

width (w) : 450 mm

1.20 1.50

1.50 1.00

2.00 0.55

SVCTBS_F_00010190

HCT 500 -75 1.00 1.50

width (w) : 500 mm

1.20 1.35

1.50 0.85

2.00 0.45

SVCTBS_F_00077517

HCT 600 -75 1.00 1.20

width 600 mm

1.20 0.90

1.50 0.55

2.00 0.25

SVCTBS_F_00150165

HCT 700 -75 1.00 0.90

width 700 mm

1.20 0.60

1.50 0.35

2.00 0.15

(Side Height 75 mm)


HCT - 75

32 7

25

25

W

75

L

25 25



Width

(mm)

Order Example


100 HCT75 075 0100 3 RFI

150 HCT75 075 0150 3 RFI

32


(m)Load kN/m

SVCTBS_F_00001330

HCT 100 - 100 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00050097

HCT 150 - 100 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00107353

HCT 200 - 100 1.00 1.50

width (w) : 200 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00016678

HCT 225 - 100 1.00 1.50

width (w) : 225 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00083593

HCT 300 - 100 1.00 1.50

width (w) : 300 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00010462

HCT 400 - 100 1.00 1.50

width (w) : 400 mm

1.20 1.50

1.50 1.50

2.00 1.35

SVCTBS_F_00065369

HCT 450 - 100 1.00 1.50

width (w) : 450 mm

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00058315

HCT 500 - 100 1.00 1.00

width (w) : 500 mm

1.20 1.00

1.50 1.00

2.00 0.80

SVCTBS_F_00048558

HCT 600 - 100 1.00 0.80

width (w) : 600 mm

1.20 0.80

1.50 0.80

2.00 0.50

SVCTBS_F_00150117

HCT 700 - 100 1.00 0.70

width (w) : 700 mm

1.20 0.70

1.50 0.60

2.00 0.30

HCT - 100



732

L

100

W

25

25

25 25



Width

(mm)

Order Example


100 HCT100 0100 0100 3 RFI

150 HCT100 0100 0150 3 RFI

33


(m)

Load kN/m

SVCTBS_F_00148097

VCT 50 - 50 1.00 1.50

width (w) : 50 mm

1.20 1.50

1.50 1.50

2.00 0.90

SVCTBS_F_00151147

VCT 100 - 50 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00151139

VCT 150 - 50 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00145147

VCT 200 - 50 1.00 1.50

width (w) : 200

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00151127

VCT 225 - 50 1.00 1.50

width (w) : 225

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00001016

VCT 300 - 50 1.00 1.50

width (w) : 300

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00055659

VCT 400 - 50 1.00 1.50

width (w) : 400

1.20 1.50

1.50 1.50

2.00 0.90

SVCTBS_F_00010290

VCT 450 - 50 1.00 1.50

width (w) : 450

1.20 1.50

1.50 1.20

2.00 0.60

SVCTBS_F_00055667

VCT 500 - 50 1.00 1.50

width (w) : 500

1.20 1.50

1.50 1.00

2.00 0.50

SVCTBS_F_00057527

VCT 600 - 50 1.00 1.50

width (w) : 600

1.20 1.00

1.50 0.60

2.00 0.30

SVCTBS_F_00055683

VCT 700 - 50 1.00 1.10

width (w) : 700

1.20 0.70

1.50 0.40

2.00 0.15

VCT - 50

(Side Height 50 mm)

Very Heavy Duty -2.00 mm Thickness

32 7

25

25

W

50

L

25 25


Order Example: VCT50 - Side height (h) - Width(w) - Thickness - Side type For more ordering details, please check page 84-85

Width

(mm)

Order Example


50 VCT50 050 0050 4 RFI

100 VCT50 050 0100 4 RFI

Width

(mm)

Order Example


50 VCT50 050 0050 4 RFI

100 VCT50 050 0100 4 RFI

SVCTBS_F_00011822

VCT 750 - 50 1.00 0.90

width (w) : 750

1.20 0.60

1.50 0.30

2.00 0.10

SVCTBS_F_00011902

VCT 800 - 50 1.00 0.80

width (w) : 800

1.20 0.50

1.50 0.20

2.00 0.10

SVCTBS_F_00086265

VCT 900 - 50 1.00 0.50

width (w) : 900

1.20 0.35

1.50 0.15

SVCTBS_F_00012018

VCT 1000 - 50 1.00 0.40

width (w) : 1000

1.20 0.20

1.50 0.10

34


(m)

Load kN/m

SVCTBS_F_00093263

VCT 100 - 75 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00011462

VCT 150 - 75 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00012262

VCT 200 - 75 1.00 1.50

width (w) : 200

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00000796

VCT 300 - 75 1.00 1.50

width (w) : 300

1.20 1.50

1.50 1.50

2.00 1.00

SVCTBS_F_00010734

VCT 400 - 75 1.00 1.50

width (w) : 400

1.20 1.50

1.50 1.50

2.00 0.90

SVCTBS_F_00010326

VCT 450 - 75 1.00 1.50

width (w) : 450

1.20 1.50

1.50 1.20

2.00 0.60

SVCTBS_F_00010206

VCT 500 - 75 1.00 1.50

width (w) : 500

1.20 1.50

1.50 1.00

2.00 0.50

SVCTBS_F_00085497

VCT 600 - 75 1.00 1.50

width (w) : 600

1.20 1.15

1.50 0.65

2.00 0.30

SVCTBS_F_00205557

VCT 700 - 75 1.00 1.50

width (w) : 700

1.20 1.15

1.50 0.65

2.00 0.30

SVCTBS_F_00056603

VCT 800 - 75 1.00 0.50

width (w) : 800

1.20 0.15

1.50 0.65

2.00 0.30

SVCTBS_F_00055935

VCT 900 - 75 1.00 1.30

width (w) : 900

1.20 0.85

1.50 0.50

2.00 0.20

32 7

25

25

W

75

L

25 25


(Side Height 75 mm)


VCT - 75


Width

(mm)

Order Example


50 VCT75 075 0050 4 RFI

100 VCT75 075 0100 4 RFI

35


(m)

Load kN/m

SVCTBS_F_00182823

VCT 100 - 100 1.00 1.50

width (w) : 100 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00011562

VCT 150 - 100 1.00 1.50

width (w) : 150 mm

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00012350

VCT 200 - 100 1.00 1.50

width (w) : 200

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00063977

VCT 300 - 100 1.00 1.50

width (w) : 300

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00010478

VCT 400 - 100 1.00 1.50

width (w) : 400

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00183445

VCT 500 - 100 1.00 1.50

width (w) : 500

1.20 1.50

1.50 1.50

2.00 1.50

SVCTBS_F_00057027

VCT 600 - 100 1.00 1.50

width (w) : 600

1.20 1.50

1.50 1.50

2.00 1.30

SVCTBS_F_00103225

VCT 700 - 100 1.00 1.50

width (w) : 700

1.20 1.50

1.50 1.50

2.00 0.90

SVCTBS_F_00011838

VCT 800 - 100 1.00 1.50

width (w) : 800

1.20 1.50

1.50 1.20

2.00 0.60

SVCTBS_F_00011978

VCT 900 - 100 1.00 1.35

width (w) : 900

1.20 1.35

1.50 0.90

2.00 0.45

SVCTBS_F_00097331

VCT 1000 - 100 1.00 1.20

width (w) : 1000

1.20 1.10

1.50 0.70

2.00 0.30

VCT - 100

732

L

100

W

25

25

25 25





Width

(mm)

Order Example


100 VCT100 0100 0050 4 RFI

150 VCT100 0100 0100 4 RFI

36

www.sfsp-ikk.com

37

CABLE TRAYFITTINGS

38

Item Code Cable tray

SVCTBA_F_00052799 HCT 50 - 50 width (w): 50

































(Side Height 50 mm) (Side Height 75 mm)



BEND 45°

39























(Side Height 75 mm)


BEND 90° - 50


SVCTBA_F_00052781 HCT 50 - 50 (w): 50

SVCTBA_F_00000034 HCT 100 - 50 (w): 100










(Side Height 50 mm)


40

INTERSECTION - 50








































41

OUTSIDE RISER BEND 45°- 50








































42

INSIDE RISER BEND 45°- 50








































43

OUTSIDE RISER BEND 90°- 50








































44

INSIDE RISER BEND 90°- 50








































45

REDUCER - 50


SVCTBA_F_00211689 HCT 700 - 50 x 50 x 1.5

SVCTBA_F_00088753 HCT 700 - 100 x 50 x 1.5

SVCTBA_F_00211697 HCT 700 - 150 x 50 x 1.5

SVCTBA_F_00211705 HCT 700 - 200 x 50 x 1.5

SVCTBA_F_00211713 HCT 700 - 225 x 50 x 1.5

SVCTBA_F_00211721 HCT 700 - 300 x 50 x 1.5

SVCTBA_F_00211729 HCT 700 - 400 x 50 x 1.5

SVCTBA_F_00088761 HCT 700 - 450 x 50 x 1.5

SVCTBA_F_00211737 HCT 700 - 500 x 50 x 1.5

SVCTBA_F_00149035 HCT 700 - 600 x 50 x 1.5

SVCTBA_F_00211745 HCT 600 - 50 x 50 x 1.5

SVCTBA_F_00026460 HCT 600 - 100 x 50 x 1.5

SVCTBA_F_00026468 HCT 600 - 150 x 50 x 1.5

SVCTBA_F_00026476 HCT 600 - 200 x 50 x 1.5

SVCTBA_F_00026484 HCT 600 - 225 x 50 x 1.5

SVCTBA_F_00026492 HCT 600 - 300 x 50 x 1.5

SVCTBA_F_00026500 HCT 600 - 400 x 50 x 1.5

SVCTBA_F_00026508 HCT 600 - 450 x 50 x 1.5

SVCTBA_F_00026516 HCT 600 - 500 x 50 x 1.5

SVCTBA_F_00211753 HCT 500 - 50 x 50 x 1.5

SVCTBA_F_00211761 HCT 500 - 100 x 50 x 1.5

SVCTBA_F_00026548 HCT 500 - 150 x 50 x 1.5

SVCTBA_F_00211769 HCT 500 - 200 x 50 x 1.5

SVCTBA_F_00026532 HCT 500 - 225 x 50 x 1.5

SVCTBA_F_00026540 HCT 500 - 300 x 50 x 1.5

SVCTBA_F_00211777 HCT 500 - 400 x 50 x 1.5

SVCTBA_F_00211785 HCT 500 - 450 x 50 x 1.5

SVCTBA_F_00211793 HCT 450 - 50 x 50 x 1.5


SVCTBA_F_00026860 HCT 450 - 100 x 50 x 1.5

SVCTBA_F_00026812 HCT 450 - 150 x 50 x 1.5

SVCTBA_F_00078643 HCT 450 - 200 x 50 x 1.5

SVCTBA_F_00026764 HCT 450 - 225 x 50 x 1.5

SVCTBA_F_00026716 HCT 450 - 300 x 50 x 1.5

SVCTBA_F_00139755 HCT 450 - 400 x 50 x 1.5

SVCTBA_F_00211801 HCT 400 - 50 x 50 x 1.5

SVCTBA_F_00060075 HCT 400 - 100 x 50 x 1.5

SVCTBA_F_00139771 HCT 400 - 150 x 50 x 1.5

SVCTBA_F_00060067 HCT 400 - 200 x 50 x 1.5

SVCTBA_F_00139763 HCT 400 - 225 x 50 x 1.5

SVCTBA_F_00050983 HCT 400 - 300 x 50 x 1.5

SVCTBA_F_00211809 HCT 300 - 50 x 50 x 1.5

SVCTBA_F_00027068 HCT 300 - 100 x 50 x 1.5

SVCTBA_F_00065745 HCT 300 - 150 x 50 x 1.5

SVCTBA_F_00026964 HCT 300 - 200 x 50 x 1.5

SVCTBA_F_00026908 HCT 300 - 225 x 50 x 1.5

SVCTBA_F_00091429 HCT 225 - 50 x 50 x 1.5

SVCTBA_F_00027164 HCT 225 - 100 x 50 x 1.5

SVCTBA_F_00027116 HCT 225 - 150 x 50 x 1.5

SVCTBA_F_00051007 HCT 225 - 200 x 50 x 1.5

SVCTBA_F_00106167 HCT 200 - 50 x 50 x 1.5

SVCTBA_F_00043800 HCT 200 - 100 x 50 x 1.5

SVCTBA_F_00039570 HCT 200 - 150 x 50 x 1.5

SVCTBA_F_00051673 HCT 100 - 50 x 50 x 1.5

SVCTBA_F_00091437 HCT 150 - 50 x 50 x 1.5

SVCTBA_F_00206249 HCT 150 - 100 x 50 x 1.5

(Side Height 50 mm)


46

REDUCER - 75


SVCTBA_F_00211817 HCT 700 - 100 x 75 x 1.5

SVCTBA_F_00211825 HCT 700 - 150 x 75 x 1.5

SVCTBA_F_00211833 HCT 700 - 200 x 75 x 1.5

SVCTBA_F_00211841 HCT 700 - 225 x 75 x 1.5

SVCTBA_F_00211849 HCT 700 - 300 x 75 x 1.5

SVCTBA_F_00211857 HCT 700 - 400 x 75 x 1.5

SVCTBA_F_00211865 HCT 700 - 450 x 75 x 1.5

SVCTBA_F_00211873 HCT 700 - 500 x 75 x 1.5

SVCTBA_F_00211881 HCT 700 - 600 x 75 x 1.5

SVCTBA_F_00199911 HCT 600 - 100 x 75 x 1.5

SVCTBA_F_00199903 HCT 600 - 150 x 75 x 1.5

SVCTBA_F_00211889 HCT 600 - 200 x 75 x 1.5

SVCTBA_F_00199891 HCT 600 - 225 x 75 x 1.5

SVCTBA_F_00072909 HCT 600 - 300 x 75 x 1.5

SVCTBA_F_00211897 HCT 600 - 400 x 75 x 1.5

SVCTBA_F_00199883 HCT 600 - 450 x 75 x 1.5

SVCTBA_F_00211905 HCT 600 - 500 x 75 x 1.5

SVCTBA_F_00149075 HCT 500 - 100 x 75 x 1.5

SVCTBA_F_00211921 HCT 500 - 150 x 75 x 1.5

SVCTBA_F_00211929 HCT 500 - 200 x 75 x 1.5

SVCTBA_F_00211937 HCT 500 - 225 x 75 x 1.5

SVCTBA_F_00149099 HCT 500 - 300 x 75 x 1.5

SVCTBA_F_00149107 HCT 500 - 400 x 75 x 1.5


SVCTBA_F_00211945 HCT 500 - 450 x 75 x 1.5

SVCTBA_F_00124431 HCT 450 - 100 x 75 x 1.5

SVCTBA_F_00199875 HCT 450 - 150 x 75 x 1.5

SVCTBA_F_00211953 HCT 450 - 200 x 75 x 1.5

SVCTBA_F_00124423 HCT 450 - 225 x 75 x 1.5

SVCTBA_F_00124415 HCT 450 - 300 x 75 x 1.5

SVCTBA_F_00211961 HCT 450 - 400 x 75 x 1.5

SVCTBA_F_00211969 HCT 400 - 100 x 75 x 1.5

SVCTBA_F_00211977 HCT 400 - 150 x 75 x 1.5

SVCTBA_F_00149059 HCT 400 - 200 x 75 x 1.5

SVCTBA_F_00211985 HCT 400 - 225 x 75 x 1.5

SVCTBA_F_00072917 HCT 400 - 300 x 75 x 1.5

SVCTBA_F_00048388 HCT 300 - 100 x 75 x 1.5

SVCTBA_F_00184319 HCT 300 - 150 x 75 x 1.5

SVCTBA_F_00048372 HCT 300 - 200 x 75 x 1.5

SVCTBA_F_00061739 HCT 300 - 225 x 75 x 1.5

SVCTBA_F_00061747 HCT 225 - 100 x 75 x 1.5

SVCTBA_F_00211993 HCT 225 - 150 x 75 x 1.5

SVCTBA_F_00212001 HCT 225 - 200 x 75 x 1.5

SVCTBA_F_00048380 HCT 200 - 100 x 75 x 1.5

SVCTBA_F_00212009 HCT 200 - 150 x 75 x 1.5

SVCTBA_F_00061763 HCT 150 - 100 x 75 x 1.5

(Side Height 75 mm)


47


REDUCER - 100



SVCTBA_F_00212017 HCT 700 - 100 x 100 x 1.5

SVCTBA_F_00212025 HCT 700 - 150 x 100 x 1.5

SVCTBA_F_00212033 HCT 700 - 200 x 100 x 1.5

SVCTBA_F_00212041 HCT 700 - 225 x 100 x 1.5

SVCTBA_F_00212049 HCT 700 - 300 x 100 x 1.5

SVCTBA_F_00212057 HCT 700 - 400 x 100 x 1.5

SVCTBA_F_00212065 HCT 700 - 450 x 100 x 1.5

SVCTBA_F_00212073 HCT 700 - 500 x 100 x 1.5

SVCTBA_F_00212081 HCT 700 - 600 x 100 x 1.5

SVCTBA_F_00100703 HCT 600 - 100 x 100 x 1.5

SVCTBA_F_00093985 HCT 600 - 150 x 100 x 1.5

SVCTBA_F_00102969 HCT 600 - 200 x 100 x 1.5

SVCTBA_F_00192271 HCT 600 - 225 x 100 x 1.5

SVCTBA_F_00079985 HCT 600 - 300 x 100 x 1.5

SVCTBA_F_00043716 HCT 600 - 400 x 100 x 1.5

SVCTBA_F_00095939 HCT 600 - 450 x 100 x 1.5

SVCTBA_F_00212089 HCT 600 - 500 x 100 x 1.5

SVCTBA_F_00212097 HCT 500 - 100 x 100 x 1.5

SVCTBA_F_00212105 HCT 500 - 150 x 100 x 1.5

SVCTBA_F_00212113 HCT 500 - 200 x 100 x 1.5

SVCTBA_F_00212121 HCT 500 - 225 x 100 x 1.5

SVCTBA_F_00212129 HCT 500 - 300 x 100 x 1.5

SVCTBA_F_00212137 HCT 500 - 400 x 100 x 1.5


SVCTBA_F_00212145 HCT 500 - 450 x 100 x 1.5

SVCTBA_F_00095955 HCT 450 - 100 x 100 x 1.5

SVCTBA_F_00112687 HCT 450 - 150 x 100 x 1.5

SVCTBA_F_00154381 HCT 450 - 200 x 100 x 1.5

SVCTBA_F_00212153 HCT 450 - 225 x 100 x 1.5

SVCTBA_F_00095947 HCT 450 - 300 x 100 x 1.5

SVCTBA_F_00212161 HCT 450 - 400 x 100 x 1.5

SVCTBA_F_00090603 HCT 400 - 100 x 100 x 1.5

SVCTBA_F_00212169 HCT 400 - 150 x 100 x 1.5

SVCTBA_F_00153753 HCT 400 - 200 x 100 x 1.5

SVCTBA_F_00212177 HCT 400 - 225 x 100 x 1.5

SVCTBA_F_00212185 HCT 400 - 300 x 100 x 1.5

SVCTBA_F_00073849 HCT 300 - 100 x 100 x 1.5

SVCTBA_F_00095963 HCT 300 - 150 x 100 x 1.5

SVCTBA_F_00073841 HCT 300 - 200 x 100 x 1.5

SVCTBA_F_00212193 HCT 300 - 225 x 100 x 1.5

SVCTBA_F_00212201 HCT 225 - 100 x 100 x 1.5

SVCTBA_F_00212209 HCT 225 - 150 x 100 x 1.5

SVCTBA_F_00212221 HCT 225 - 200 x 100 x 1.5

SVCTBA_F_00050471 HCT 200 - 100 x 100 x 1.5

SVCTBA_F_00154389 HCT 200 - 150 x 100 x 1.5

SVCTBA_F_00154397 HCT 150 - 100 x 100 x 1.5

48

TEE BRANCH - 50








































50

www.sfsp-ikk.com

51

CABLE TRAYACCESSORIES

52

Straight connector / 1000

Order Example: 1000 - Side height (h) - Thickness (t)

For more ordering details,please check pages 84-85

Order Example

Item (h) (t)

1000 050 2

1000 100 2

1000

Angle Connector / 1010 - 1020 - 1030

1010

1020

1030

Order Example

Item (h) (t)

1010 050 2


For more ordering detailsplease check pages (68-69)

Order Example

Item (h) (t)

1020 050 2



Order Example

Item (h) (t)

1030 050 2



53

Expansion Connector / 1020

1040

Adjustable Connector / 1050

1050

Horizontal Adjustable Connector / 1060 Aluminum Horizontal Adjustable Connector / 1070

10701060

Joint plate-Fish plate / 1080 End plate / 1090 Drop-out plate / 2000

20001080 1090

54

Crimping Type Copper / 2100 Tinned Copper Flexible Braids / 2200

Tubular Cable Terminal Ends Crimped with Connectors/ Terminals

G

ED C

H B

Cable mm

2Stud Hole

Dimensions (mm)

A C D G H B J

1.5 6.5 1.8 3.7 10 4 6 6 18

2.56.58.4

2.42.4

44.2

1012

56

69

88

2126

46.58.4

3.13.1

4.85.0

1012

56

69

88

2126

66.58.4

3.83.8

5.55.5

1012

56

69

1010

2428

106.58.4

4.54.5

6.26.2

1112

66

79

1010

2628

166.58.4

5.45.4

7.17.1

1212

77

77

1212

3030

20 8.4 6 7.7 12 7 7 12 32

256.58.4

6.86.8

8.88.8

1313

77

77

1212

3030

Size mm

2

Dimensions (mm) Current rating AMPJ E1 E2

4

50100150200

6666

6666

50505050

10

50100150200

6666

6666

90909090

16

100150200250300

8.58.58.58.58.5

8.58.58.58.58.5

125125125125125

25

100150200250300

1010101010

1010101010

160160160160160

2100 2200

55

Cable tray cover

Cable tray cover with locking clamp / 3200

Functions Cable tray covers shall be considered for any of the following purposes:• Protection from falling objects or debris, as may occur beneath personnel walkways.• Shielding from ultra-violet rays of the sun and guarding against other weathering elements.• Minimizing accumulation of foreign contaminants such as ash or other industrial deposits.• Protection of cables and personnel where a riser tray penetrates a floor or grating.

Covers Side Height Types :

• Solid without flange• Solid with flange• Ventilated without flange• Ventilated with flange

- (SOF)

- (SWF)

- (VOF)

- (VWF)

- Cable Ladder covers are supplied with or without a 15 mm downturned flange.- Straight section covers are furnished 3000 mm long. All fitting covers are furnished in solid design only.

Covers Side Height Types :• Solid without flange - (VOF)• Solid with flange - (VWF)

Locking clampThickness: 2mm

LockCover

Tray

Solid Cover / 3000 Ventilated Cover / 3100

3000 3100

Item Item Code

Solid Cover SVCTCS – F –00044554

Ventilated Cover SVCTIS – F – 00136105

Locking Clamp STCB_F_00178149

3300

56

FRAMING SYSTEMS

Washers (SRW) | DIN 125 | ASTM F436

Washers (SRW) | DIN 440 | DIN 9021

Square Washers (SSW)

Zinc Plated Stainless SteelD d S

(mm) (mm) (mm)

M6 M6 12 6.4 1.6

M8 M8 16 8.4 1.6

M10 M10 21 10.5 2

M12 M12 24 13 2.5

M16 M16 30 17 3

M18 M18 34 19 3.2

M20 M20 39 20.5 3.6

Order Example: SRW - M 12 -DIN 115

ASTM F436

Round Washers DIN 440, DIN 9021

Square Washers SSW

DIN Zinc Plated Stainless

Steel

D d S

(mm) (mm) (mm)

440 M6 22 6.6 2

9021 M8 M8 24 8.4 2

9021 M10 M10 30 10.5 2.5

440 M12 45 13.5 4

9021 M12 M12 37 13 3

9021 M16 M16 50 17 3

Order Example: SRW - M 12 DIN 9021

H.D. Galvanized BoltStainless Steel

Bolt

a x b x d

(mm)

M8 M10 40 x 40 x (4-5-6)

M10 M12 40 x 40 x (4-5-6)

M12 M16 40 x 40 x (4-5-6)

Order Example: SSW 41/41 M 12 - d

SSW 40/40 for all channels 41/21 Series

SSW 41/41 for all channels41/41 Series

57

Round Head (SRH) | DIN 7985

Coupler Sleeves (SCS)

Fully Threaded Rods Grade 4.6 DIN 975 ASTM A 36, A193

Round Head Machine Screws

Coupler Sleeves Rounded

Zinc Plated Thread Length Load cap.

(mm) (kN)

M6 2000/3000 2.2

M8 2000/3000 4.0

M10 2000/3000 6.4

M12 2000/3000 12.9

M16 2000/3000 17.3

M18 2000 22.0

M20 2000 27.0

Threaded Rod (STR) - DIN 975 - ASTM A36

Zinc Plated Thread

Length d

(mm) (mm)

M6 30-40 6.0

M8 30-40 8.0

M10 20-60 10.0

SRH - M10 DIN 7985

Electro-plated Thread

Stainless Steel Thread

D LLoad

Capacity

(mm) (mm) (kN)

M6 M6 10/10 15 2.2

M8 M8 12/14 20 4.0

M10 M10 13/16 25 6.4

M12 M12 16/20 30 9.3

M16 M16 21/25 40 17.3

M20 M20 26/32 50 27.0

SCS - M16

FRAMING SYSTEMS

58

FRAMING SYSTEMS

Zinc Plated Thread

Stainless Steel Thread

S/mDIN

S/mISO

e

(mm) (mm) (mm)

M6 M6 10/5 10/6 11.5

M8 M8 13/6.5 13/7.5 15.0

M10 M10 17/8 16/9.5 19.6

M12 M12 19/10 18/12 21.9

M16 M16 24/13 24/15.5 27.7

M18 M18 26/16 26/16 22.0

M20 M20 30/18 29/20.5 27.0

Order Example: SHN - M12

Zinc Plated

H.D. Galvanized Grade 4.6

Head HeadSquare Width

Square Depth

(E) (E)(A) mm

(H) mm

(O) mm(P)

mm

M5 M5 12.0 3.0 5.0 3.2

M6 M6 15.1 3.70 6.40 4.0

M8 M8 18.3 4.50 8.23 4.75

M10 M10 21.44 5.30 9.86 5.56

M16 M16 34.14 8.74 16.3 8.74

Order Example: STC - M6

Roofing Bolts (SRB)

Carriage Bolts (STC)

Hexagon nut (SHN) | DIN 934 or ISO 4032 (= DIN EN 24032) | ASTM A563

Roofing Bolts

Carriage Bolts with Nut Below Head DIN 603

Hexagon Nuts DIN 934, DIN EN 24032, ASTM A 563

Thread Size

M4

x - y M5x - y

M6x - y

M8x - y

(mm) (mm) (mm) (mm)

Length 10 - 50 10 - 80 12 - 120 16 - 150

Order Example: SRB - M6

- Materials : low carbon steel , carbon steel - Steel S235 , grade 4.6 , 4.8 and 8.8- Surfaces : plain , black and zinc plated - Length = X (mm) – Y (mm)

59

Hexagonal Rod Coupler with view hole (SHR)

Hex Head Bolt (SHB) | DIN 933 or EN 24017 ASTM A307, A449 (without nut)

Hexagonal Rod Coupler Grade 8.8 ASTM a 563

DIN 933, DIN 24017, ASTM A307, A449

Electroplated Thread Stainless Steel Thread

D LLoad

capacity

(mm) (mm) (kN)

M10 M10 13 40 6.4

M12 M12 17 40 9.3

M16 M16 22 50 17.3

M 18 M 18 23 60 22.0

M 20 M 20 25 70 27.0

Order Example: HRC - GV - M 12

Zinc Plated Dimen-sion

Stainless Steel Dimension

S DIN S EN

(mm) (mm)

M 6 x 1210 10

M 6 x 25

M 8 x 25 M 8 x 2513 13

M 8 x 40

M 10 x 20

17 16

M 10 x 30 M 10 x 30

M 10 x 45 M 10 x 45

M 10 x 60

M 10 x 70

M 12 x 22

19 18

M 12 x 25 M 12 x 25

M 12 x 30 M 12 x 30

M 12 x 40 M 12 x 40

M 12 x 50

M 12 x 60 M 12 x 60

M 12 x 80 M 12 x 80

M 12 x 90

M 16 x 40 M 16 x 40

24 24M 16 x 60 M 16 x 60

M 16 x 90 M 16 x 90

M 18 x 40 M 18 x 40

27 26M 18 x 50 M 18 x 50

M 18 x 60 M 18 x 60

M 18 x 80 M 18 x 80

M 20 x 40 M 20 x 40

32 32M 20 x 50 M 20 x 50

M 20 x 60 M 20 x 60

M 20 x 80 M 20 x 80

FRAMING SYSTEMS

60

www.sfsp-ikk.com

61

CABLE TRAYSUPPORT SYSTEM

62

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Z

Z

YY

Z

Z

YY

Z

Z

YY

Z

Z

Y Y

21.0

7.0

41.0

21.0

41.0

22.0

42.0

7.0

41.0

22.0

41.0

7.0

41.0

41.0

41.0

22.0

82.0

7.0

41.0

22.0

50

30

13

Part NoChannel Dimensions

ThicknessHeight “H” Width “W”

CCH - 220/221 21.0 mm 41.0 mm 1.5 mm

CCH - 240/241 41.0 mm 41.0 mm 1.5 mm

CCH - 320/321 21.0 mm 41.0 mm 2.0 mm

CCH - 340/341 41.0 mm 41.0 mm 2.0 mm

CCH - 420/421 21.0 mm 41.0 mm 2.5 mm

CCH - 440/441 41.0 mm 41.0 mm 2.5 mm

Toothedchannel

CCH 320 3 2 0

Channel Patterns PT - 0ST - 1B2B - 2

Size mm 21/41 - 2mm 41/41 - 4

Material Thicknessfor 1.5 mm 2

for 2.0 mm 3 for 2.5 mm 4

TFor Toothed Channel add “T” after the Part no. ex.: CCH-220T

Metal Framing Channels

GENERAL INFORMATION

CHANNEL

SFSP’s metal framing channel is cold formed on modern rolling machines from low carbon steel manufactured according to BS 6946:1988. A continuous slot provides the ability to make attachments at any point.

LENGTHSStandard length: 3000mm with ± 3.2mm length tolerance.Custom lengths are available upon request.

FINISHESStandard Finishes: Pre-Galvanized finish (ASTM A653M coating G90 and G60). Hot Dip Galvanized after fabrication (ASTM A123 or BSEN ISO1461:2009) . Other custom coatings are available upon request.

SELECTION CHART

63

ST SLOTTED TYPE B2B TYPE

Channel Hole Patterns

PT PLAIN TYPE

64

CANTILEVER ARM BRACKET

F1

1/2 A 1/2 A

or F2

Length A (mm)

h

2525

h-50

b t

Base plate : height (h) x width (b) x thickness (t) 100 50 8 •In the case of concrete support frame, use anchor M10•In the case of concrete C-Channel frame, Hex bolt M8 .** Connection force (pull-out force) : 3.10 (kN)

Base plate : height (h) x width (b) x thickness (t) 140 50 10 •In the case of concrete support frame, use anchor M16 .•In the case of concrete C-Channel frame, Hex bolt M8.** Connection force (pull-out force) : 7.50 (kN)

Cantilever Arm Brackets - SCA

Length Allowable Load

A (mm) F1* F2* Fz**

150 1.10 0.60 3.10

300 0.60 0.30 3.10

450 0.40 0.20 3.10

600 0.30 0.10 3.10

700 0.20 0.10 3.10

800 0.20 0.10 3.10

900 0.20 0.10 3.10

1000 0.20 0.10 3.10


A (mm) F1* F2* Fz**

150 3.10 1.50 7.50

300 1.50 0.80 7.50

450 1.00 0.50 7.50

600 0.80 0.40 7.50

700 0.70 0.30 7.50

800 0.60 0.30 7.50

900 0.50 0.30 7.50

1000 0.50 0.20 7.50

* Given Loads are always in [kN] “ Allowable characteristic live load “

CCH421 41x21x2.5

A

A

65

Base plate : height (h) x width (b) x thickness (t) 140 50 10

•In the case of concrete support frame, use anchor M12.•In the case of concrete C-Channel frame, Hexbolt M8. ** Connection force (pull-out force) : 4,8 (kN)

Base plate : height (h) x width (b) x thickness (t) 180 60 12 •In the case of concrete support frame, use anchor M16.•In the case of concrete C-Channel frame, Hex bolt M10 .** Connection force (pull-out force) : 8,30 (kN)

Cantilever Arm Brackets - SCA


A (mm) F1* F2* Fz**

150 2.50 1.30 4.80

300 1.30 0.60 4.80

450 0.80 0.40 4.80

600 0.60 0.30 4.80

700 0.50 0.30 4.80

800 0.50 0.20 4.80

900 0.40 0.20 4.80

1000 0.40 0.20 4.80


A (mm) F1* F2* Fz**

150 7.00 3.50 8.30

300 3.50 1.80 8.30

450 2.30 1.20 8.30

600 1.80 0.90 8.30

700 1.50 0.80 8.30

800 1.30 0.70 8.30

900 1.20 0.60 8.30

1000 1.10 0.50 8.30

F1

1/2 A 1/2 A

or F2

Length A (mm)

h

b t

2525

h-50

* Given Loads are always in [kN] “ Allowable characteristic live load “

CCH422 41x21x2.5 B2B

CCH442 41x41x2.5 B2B

A

A

66

U - Support / 3000

I - Support / 3050

Wall Bracket | 3200 - 3250

Head Plate / 3100

Order Example

Item (h) (t)

3000 0200 5

Order Example

Item (L) (t)

3200 0210 5

U-Support with welded-on head plate 200 x 100 x 5mm

U-Support with welded-on head plate 200 x 100 x 5mm

3000

3050

Order Example: 3000 - Length (L) - Thickness (t) For more ordering details, please check pages 84-85


200 x 100 x 5mm

3100

3200 3250

5 mm thickness

for U-Support

for I-Support


68

www.sfsp-ikk.com

69

CONCRETE FIXATIONANCHORS

70

Direction of LoadingThe direction of the applied load shall be considered to determine the most appropriate anchor. The tension and shear components shall be lesser than the recommended load/design resistance in the direction concerned.

Tensile LoadingTensile loads are applied along the axis of fixing (see Fig.1).Common examples include suspended ceiling applications and the suspension of mechanical services, pipe work , duct work ,etc ...

Shear LoadsShear loads act at right angles to the axis of fixing and directly against the face of the structural material (see Fig.2).Shear performance is governed mainly by the shear strength of the bolt material and by the compressive strength of the supporting substrate.

Oblique / Combined LoadsOblique loads are a combination of tension and shear components (see Fig.3).If the angle of the applied oblique load is within 10˚ of pure tension or pure shear, the safe working load for that direction may be assumed. Otherwise, the applied oblique load shall be resolved into its shear and tensile components.

Offset LoadsOffset loads act at right angles to the fixing axis but are offset from the surface (see Fig.4).In this situation, the deflection of the bolt due to bending needs to be considered as well as the shear capacity of the anchor

Slotted Holes in FixtureWhen fixing anchors through slotted holes; it is important to ensure that there is an adequate surface of contact between the washer and the fixture to guarantee a positive clamping force. If in doubt, a square plate washer with a thickness of 3mm or above would be recommended in place of the standard washer supplied.

Diamond Drilled HolesWhen holes are formed in the structure using a diamond drilling system; extra care is required to ensure the holes are thoroughly cleaned by brushing and blowing for at least three times. Also, to make a key for the anchor (particularly if a bonded anchor is installed) the sides of the hole shall be roughened up by inserting a standard masonry bit into the hole attached to a hammer action drilling machine. A resin with minimal shrinkage shall be selected for diamond drilled holes.

71

Fig.1

Fig.2

Fig.3

Fig.4

72

STM STM/H

EXPANSION STEEL ANCHOR - STM

Features:

• Suitable for all screws or threaded bolts with metric thread.• Low energy impact, power-saving assembly.• Multiple removing and fixing.• Inside threaded anchor, allows great flexibility.• Can use variable lengths and art of threaded rods or bolts.• Small edge distance and small distance between anchors.• Provide uniform load by tightening the screw or hexagon nut, the cone pulls into the expansion anchor and tightens against

the drilled hole. • Suitable for use in concrete and natural stone.

Typical Applications:

Cable Management , handrails, brackets, staircases, ladders, machines, window panels, base plates, scaffoldings and frameworks

Technical Data:

Recommended loads (non cracked -concrete C 20/25).

Type(Order No)

Tension Load Shear LoadBendingMoment

Screw Grade

(kN) (kN) (Nm)

M6 2.5 2.3 3.9 8.8

M8 3.3 4.4 17 8.8

M10 4.7 6.5 34 8.8

M12 6.9 8.5 60 8.8

*for cracked concrete we shall use 0,5 x this value (approximately)

Materials:

• Zinc plated steel.• Stainless steel [ SS 304 (A2), SS 316 (A4) ].

FR AMI NG SY STEM S ACC ESSORI ES

s

L

D

L

Loadcap.

[kN]

Order example:

Order example:

Loadcap.

[kN]

S

[mm]

L

[mm]

D

[mm]

L

[mm]

10/10

12/14

13/16

16/20

21/25

26/32

13

17

22

15

20

25

30

40

50

40

40

50

2,2

4,0

6,4

9,3

17,3

27,0

6,4

9,3

17,3

M 6

M 8

M 10

M 12

M 16

M 20

M 10

M 12

M 16

M 6

M 8

M 10

M 12

M 16

M 20

M 10

M 12

M 16

CS - GV - M 16

HRC - GV - M 12

Coupler Sleeves, Square washers ,Sleeve Anchor ,Throught Anchor .......

Throught Anchor

Sleeve Anchor

b

da

b

d

a

Order Example: SW 41/41 - HDG - M 12

40 x 40 x 5

40 x 40 x 5

40 x 40 x 5

40 x 40 x 6

40 x 40 x 6

40 x 40 x 6

a x b x d

[mm]

M 10

M 12

M 16

M 6

M 10

M 12

M 6

M 10

M 12

M 10

M 12

M 16

ElectroplatedThread - GV


Stainless SteelThread


H.D. Galvanisedfor Bolts - HDG

Stainless Steelfor Bolts

Yellow zinc plated SteelThread (Zn)

L (mm)

Order example:

M 6

M 8

M 10

M 12

45

50

60

74

M 6

M 8

M 10

STM - Zn - M 12

Stainless Steel

Thread

Drill

(mm)

10

12

15

18

Min.Drill hole

(mm)

55

60

75

90

M 6

M 8

M 10

Stainless Steel

Thread


Screwx Length (mm)

Order example:

M 6

M 8

M 10

M 12

6x50

8x60

10x80

12x90

STMH - Zn - M 12

S max fixing(mm)

5

10

20

25

Yellow zinc plated Steel Thread (Zn)

10

25

45

75

10.3

12.2

17.1

25.3

9.6

17.5

27.8

40.5

M 6

M 8

M 10

M 12

TypeMax Torque

(mm)Pull Out

Shear

8

19

38

9.5

14

19

8.4

15.4

24.4

Max Torque(mm)

Pull Out

Shear


Pull-out values in KN -concrete R 250kg/cm2

its is advisable to apply safty factor in consideration of the various ways of employment

(1KN=100kg)

FR AMI NG SY STEM S ACC ESSORI ES

s

L

D

L

Loadcap.

[kN]

Order example:

Order example:

Loadcap.

[kN]

S

[mm]

L

[mm]

D

[mm]

L

[mm]

10/10

12/14

13/16

16/20

21/25

26/32

13

17

22

15

20

25

30

40

50

40

40

50

2,2

4,0

6,4

9,3

17,3

27,0

6,4

9,3

17,3

M 6

M 8

M 10

M 12

M 16

M 20

M 10

M 12

M 16

M 6

M 8

M 10

M 12

M 16

M 20

M 10

M 12

M 16

CS - GV - M 16

HRC - GV - M 12

Coupler Sleeves, Square washers ,Sleeve Anchor ,Throught Anchor .......

Throught Anchor

Sleeve Anchor

b

da

b

d

a

Order Example: SW 41/41 - HDG - M 12

40 x 40 x 5

40 x 40 x 5

40 x 40 x 5

40 x 40 x 6

40 x 40 x 6

40 x 40 x 6

a x b x d

[mm]

M 10

M 12

M 16

M 6

M 10

M 12

M 6

M 10

M 12

M 10

M 12

M 16





H.D. Galvanisedfor Bolts - HDG

Stainless Steelfor Bolts


L (mm)

Order example:

M 6

M 8

M 10

M 12

45

50

60

74

M 6

M 8

M 10

STM - Zn - M 12

Stainless Steel

Thread

Drill

(mm)

10

12

15

18

Min.Drill hole

(mm)

55

60

75

90

M 6

M 8

M 10

Stainless Steel

Thread


Screwx Length (mm)

Order example:

M 6

M 8

M 10

M 12

6x50

8x60

10x80

12x90

STMH - Zn - M 12

S max fixing(mm)

5

10

20

25

Yellow zinc plated Steel Thread (Zn)

10

25

45

75

10.3

12.2

17.1

25.3

9.6

17.5

27.8

40.5

M 6

M 8

M 10

M 12

TypeMax Torque

(mm)Pull Out

Shear

8

19

38

9.5

14

19

8.4

15.4

24.4

Max Torque(mm)

Pull Out

Shear


Pull-out values in KN -concrete R 250kg/cm2

its is advisable to apply safty factor in consideration of the various ways of employment

(1KN=100kg)

73

EXPANSION STEEL ANCHOR - STMSetting Data:

Edge distance > 1,5 x H eff., distance between anchors > 3 x H eff. Thickness of foundation > 2 x H eff.

SizeH eff.

Edge Distance

C

Distance BetweenAnchors S

Thickness ofFoundation

hmin

WasherTightening

TorqueSpanner

size

(mm) (mm) (mm) (mm) (Ø) (Nm) (mm)

M6 40 60 120 100 12 x 1.6 10 10

M8 45 68 135 100 16 x 1.6 20 13

M10 55 83 165 110 20 x 2.0 40 17

M12 70 105 210 140 24 x 2.5 75 19

Installation Parameters:H eff = Effective anchorage depth.

Bolt SizeLength

exp.unitDrill (Ø) Drilling depth H eff. Usable Length Screw Ø x Length

(mm) (mm) (mm) (mm) (mm) (mm)

M6 45 10 55 40 5 M6 x 50

M8 50 12 60 45 10 M8 x 60

M10 60 15 80 55 20 M10 x 80

M12 75 18 90 70 25 M12 x 90

Installation

H eff

Thickness of Foundation

Length

Washer

MSpanner

Size

Drilling depth

Usable Length

1 - Drill a hole and clean it with a brush, remove dust with a blower. | 2 - Place the plug and the object to fix. 3 - Tighten the screw. | 4 - Fixing completed.

3 42

Throughbolt, stainless steel A4/316

serutaeFetercnocdekcarcnurof7noitpOlavorppAlacinhceTnaeporuE•

• Torque controlled expansion• Applications in damp areas and outdoors• Stainless steel A4/316• Face xing or through xing

Applications ,senihcam,snoitcurtsnocleets,sgniliar,syartelbac,sedacaf

under-constructions, high-racks, pro les

Tension load (kN)

Shear load (kN)

Bending moment (Nm)

Edge Distance C (mm)

He�. (mm)

Distance betweenanchor S (mm)

Thickness offoundation

(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102

50 Mungo Befestigungstechnik AG

Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

1

74

DROP-IN ANCHOR - SDA

Features:

• Provides permanently fixed threaded socket in concrete.• Use in non-cracked concrete or cracked concrete and natural stone.• The anchor will spread and tighten against the drilled hole after inserting with setting tool.• Low setting depth, reduced drilling time.• Enables cost-effective assembly .• Multiple removing and fixing.


Pipes, ventilation ducts, suspended ceilings, sprinkler systems, brackets, threaded rods and Cable Trays.

Technical Data:

Type(Order No)

Tension Load Shear LoadBendingMoment

Screw Grade

(kN) (kN) (Nm)

M6 2.5 2.3 3.9 8.8

M8 3.3 4.4 17 8.8

M10 4.7 6.5 34 8.8

M12 6.9 8.5 60 8.8


Materials:

• Zinc plated steel.• Stainless steel [ SS 304 (A2), SS 316 (A4) ].

Setting Data:

Edge distance > 1.5 x effective anchorage depth, distance between anchors > 3,0 x effective anchorage depth, min. thickness of foundation > 2,5 x H eff.

SizeH eff.

Edge Distance

C



hminWasher

Tightening Torque

Spannersize

(mm) (mm) (mm) (mm) (Ø) (Nm) (mm)

M6 25 37.5 75 100 4 10 10

M8 30 45 90 100 9 13 13

M10 40 60 120 130 17 17 17

M12 50 75 150 140 30 19 19

M16 65 197.5 195 160 75 24

SDA

75

Installation Parameters:

H eff = Effective anchorage depth.

Thread Size

AnchorLength

ThreadLength

Drill (Ø)

Drilling Depth

Effective Anchorage Depth H eff.

Min. Screw Depth E

Max. Screw Depth E

(mm) (mm) (mm) (mm) (mm) (mm) (mm)

M6 25 11 8 25 25 6 12

M8 30 13 10 30 30 8 13

M10 40 15 12 40 40 10 17

M12 50 20 16 50 50 12 18

M16 65 25 20 65 65 16 23

Anchor Length

Drilling Depth

E E= Screw Depth

Drill Ø

H eff

Installation

1 - Drill a hole and clean it with a brush, remove dust with a blower. | 2 - Insert the anchor sleeve in the hole. 3 - Tighten to the recommended torque. | 4 - Fixing completed.






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

1 2 3 4

Manual Setting Tool

Use the setting tool to drive the internal wedge into the anchor.

34 Technical Advisory Service Tel: +44 (0) 1530 812 857, Fax: +44 (0) 1530 812 862

R-DCA WEDGE ANCHORFOR CONCRETE & STONE

DESCRIPTIONProvides permanently �xed threaded sockets in concrete. Allows bolts or studs to be installed and removed without damaging the anchor. Available in: zinc plated steel and stainless steel grade A4 (1.4401). Install with manual setting tool or mechanical setting tool for use with hammer action drilling machines.

SUITABLE FOR USE IN:ConcreteStone.

FEATURES1. Internally threaded to take stud or bolt.2. Easy to install by hammer action.3. Slotted sleeve and captive internal tapered wedge to

facilitate easy setting and expansion.

Product Information

Installation

1. Drill a hole of required diameter and depth.

2. Remove debris and thoroughly clean hole with brush and pump.

3. Insert wedge anchor, slotted end �rst.

5. Alternatively use mechanical setting tool with appropriate drilling machine.

4. Use the setting tool to drive the internal wedge into the anchor.

R-DCA WEDGE ANCHOR - ZINC PLATED

THREADSIZE(d)

ANCHORLENGTH

(mm)( l )

THREAD LENGTH(mm)(lG )

HOLE DIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )

PRODUCT CODE NEW CODE

M6 25 118 27 4.5 77-108 WA-06M8 30 13 10 32 11 77-120 WA-08

M10 40 15 12 42 22 77-132 WA-10M12 50 20 15 52 38 77-141 WA-12M16 65 25 20 67 95 77-150 WA-16M20 80 35 25 82 185 77-162 WA-20

Manual Setting Tool Mechanical Setting Tool

R-DCA WEDGE ANCHOR - STAINLESS STEEL

THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLE DIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 118 27 4.5 77-608 WA-A4-06M8 30 13 10 32 11 77-620 WA-A4-08

M10 40 15 12 42 22 77-632 WA-A4-10M12 50 20 15 52 38 77-641 WA-A4-12M16 65 25 20 67 95 77-650 WA-A4-16

ETA PENDING 2007

TYPICAL APPLICATIONSe For permanently �xing threaded sockets in concrete and good quality stone.e Ideal for secure �xing for mechanical services, cable trays, platforms, drain covers, suspended ceilings etc.e Securing equipment that may need to be removed or replaced.

Stainless Steelfor bolt



DESCRIPTIONProvides permanently xed threaded sockets in concrete.Allows bolts or studs to be installed and removed withoutdamaging the anchor.Available in: zinc plated steel and stainless steel grade A4(1.4401).Install with manual setting tool or mechanical setting tool for use with hammer action drilling machines.




Product Information

Installation


2. Remove debris andthoroughly clean hole withbrush and pump.

3. Insert wedge anchor,slotted end

5. Alternatively use mechanicalsetting tool with appropriatedrilling machine.



THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLEDIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 11 8 27 4.5 77-108 WA-06M8 30 13 10 32 11 77-120 WA-08

M10 40 15 12 42 22 77-132 WA-10M12 50 20 15 52 38 77-141 WA-12M16 65 25 20 67 95 77-150 WA-16M20 80 35 25 82 185 77-162 WA-20

Manual Setting Tool

THREAD SIZE(d)

M6M8

M10M12M16M20

Mechanical Setting Tool

THREAD SIZE(d)

GRIP TYPE

M6 SDS-plusM8 SDS-plus

M10 SDS-plusM12 SDS-plusM16 SDS-maxM20 SDS-max


THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLEDIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 11 8 27 4.5 77-608 WA-A4-06M8 30 13 10 32 11 77-620 WA-A4-08

M10 40 15 12 42 22 77-632 WA-A4-10M12 50 20 15 52 38 77-641 WA-A4-12M16 65 25 20 67 95 77-650 WA-A4-16

ETA PENDING 2007

TYPICAL APPLICATIONSe For permanently xing threaded sockets in concrete and good quality stone.e Ideal for secure for mechanical services, cable trays, platforms, drain covers, suspended ceilings etc.e Securing equipment that may need to be removed or replaced.

RAWL_KATALOG_2007_2008.indb 34 2007-10-15 14:34:42


Alternatively use the mechanical setting tool with an appropriate drilling machine.



DESCRIPTIONProvides permanently �xed threaded sockets in concrete. Allows bolts or studs to be installed and removed without damaging the anchor. Available in: zinc plated steel and stainless steel grade A4 (1.4401). Install with manual setting tool or mechanical setting tool for use with hammer action drilling machines.




Product Information

Installation


2. Remove debris and thoroughly clean hole with brush and pump.

3. Insert wedge anchor, slotted end �rst.

5. Alternatively use mechanical setting tool with appropriate drilling machine.



THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLE DIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 118 27 4.5 77-108 WA-06M8 30 13 10 32 11 77-120 WA-08

M10 40 15 12 42 22 77-132 WA-10M12 50 20 15 52 38 77-141 WA-12M16 65 25 20 67 95 77-150 WA-16M20 80 35 25 82 185 77-162 WA-20

Manual Setting Tool Mechanical Setting Tool


THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLE DIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 118 27 4.5 77-608 WA-A4-06M8 30 13 10 32 11 77-620 WA-A4-08

M10 40 15 12 42 22 77-632 WA-A4-10M12 50 20 15 52 38 77-641 WA-A4-12M16 65 25 20 67 95 77-650 WA-A4-16

ETA PENDING 2007

TYPICAL APPLICATIONSe For permanently �xing threaded sockets in concrete and good quality stone.e Ideal for secure �xing for mechanical services, cable trays, platforms, drain covers, suspended ceilings etc.e Securing equipment that may need to be removed or replaced.

Stainless Steelfor bolt



DESCRIPTIONProvides permanently xed threaded sockets in concrete.Allows bolts or studs to be installed and removed withoutdamaging the anchor.Available in: zinc plated steel and stainless steel grade A4(1.4401).Install with manual setting tool or mechanical setting tool for use with hammer action drilling machines.




Product Information

Installation


2. Remove debris andthoroughly clean hole withbrush and pump.

3. Insert wedge anchor,slotted end

5. Alternatively use mechanicalsetting tool with appropriatedrilling machine.



THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLEDIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 11 8 27 4.5 77-108 WA-06M8 30 13 10 32 11 77-120 WA-08

M10 40 15 12 42 22 77-132 WA-10M12 50 20 15 52 38 77-141 WA-12M16 65 25 20 67 95 77-150 WA-16M20 80 35 25 82 185 77-162 WA-20

Manual Setting Tool

THREAD SIZE(d)

M6M8

M10M12M16M20


THREAD SIZE(d)

GRIP TYPE

M6 SDS-plusM8 SDS-plus

M10 SDS-plusM12 SDS-plusM16 SDS-maxM20 SDS-max


THREADSIZE(d)

ANCHORLENGTH

(mm)( l )


HOLEDIAMETER

(mm)(do)

HOLE DEPTH(mm)(ho )

MAXIMUMRECOMMENDED

TORQUE(Nm)

(Tinst )


M6 25 11 8 27 4.5 77-608 WA-A4-06M8 30 13 10 32 11 77-620 WA-A4-08

M10 40 15 12 42 22 77-632 WA-A4-10M12 50 20 15 52 38 77-641 WA-A4-12M16 65 25 20 67 95 77-650 WA-A4-16

ETA PENDING 2007

TYPICAL APPLICATIONSe For permanently xing threaded sockets in concrete and good quality stone.e Ideal for secure for mechanical services, cable trays, platforms, drain covers, suspended ceilings etc.e Securing equipment that may need to be removed or replaced.

RAWL_KATALOG_2007_2008.indb 34 2007-10-15 14:34:42

76

Features:

• Suitable for use in concrete, natural stone, brickwork and blockwork• Small distance between anchors.• Optimum performance in most base material types.• No protruding threads after installation.• Small distance between anchors and from edge.• Controlled expansion.• Zinc plated > 5µm.• Effective force distribution in the drilled hole.• Sleeve anchor with hexagon screw or with threaded bolt.


Uni-channel ,railings, steel constructions , machines, high-racks, cable support systems and mechanical fixations.

Technical Data: Materials:

Recommended loads (non cracked-concreted C 20/25).

Bolt SizeTension Load Shear Load Torque Moment

(kN) (kN) (Nm)

M6 2.56 2.0 5.0

M8 3.33 3.3 12.5

M10 4.1 5.0 25.5

M12 6.66 7.5 .......


Setting Data:

Edge distance > 1.5 x effective anchorage depth, distance between anchors> 3,0 x effective anchorage depth, min. thickness of foundation > 2,5 x H eff.

Bolt Size

H eff.Edge

DistanceC

Distance BetweenAnchors

S


hmin

Washer (Ø)

Tightening Torque Spanner

size

(mm) (mm) (mm) (mm) (mm) (Nm)

M6 35 52.5 105 70 18 x 1.6 8 10

M8 40 60 120 80 16 x 1.6 25 13

M10 50 75 150 100 20 x 2.0 40 17

M12 75 112.5 225 150 26 x 2.0 50 19

Sleeve Anchor - SAS:

With hexagon screw (non-cracked concrete C20/25).

SizeLength Drill

Hole Ø in Fixture

Drilling Depth

Setting Depth

H eff.Min.Usable

Length

(mm) (Ø) (mm) (mm) (Ø) (mm) (mm)

M6 45 8 10 55 35 35 5

M6 60 8 10 55 35 35 15

M8 60 10 12 60 40 40 15

M8 80 10 12 60 40 40 25

M10 70 12 14 70 50 50 15

M10 100 12 14 70 60 50 35

*for cracked concrete we shall use 0,5 x this value (approximately).

SLEEVE ANCHOR - SAS

• Zinc plated steel.• Stainless steel [ SS 304 (A2), SS 316 (A4) ].AHM Sleeve Anchor

serutaeFsecnatsidecapsdnaegdellamS•

• Torque controlled expansion• Zinc plated > 5µm• Through xing

Applications snoitcurtsnoc-rednu,selorp,senihcam,snoitcurtsnocleets

noitallatsnI

S-AHM Sleeve Anchor with hexagon screw htgneLmmØllirDmm

htpedgnillirDdaerhTmm

htgnelelbasUmm

htpedgnitteSmin.mm

6M6M8M8M01M01M

B-AHM Sleeve Anchor with threaded bolt and nut


Met

al P

rodu

cts

kat_en-2007-11-29.indd 58 4.12.2007 10:13:36 Uhr

Tension load (kN)

Type(Order No)

Shear load (kN)

Bending moment (Nm)


6M8M01M21M

2.03.05.0

5.7

105120150225

Min. thickness of found

(hmin) mm

Tighten torque(Nm)

Spannersize (SAS)

Spannersize (SAB)

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

10101212

M6M6M8M8

M10M10

4560608070

100

555560607070

51515251535

353540405050

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

101010121212161616

M6M6M8M8M8

M10M10M10M12M12M12

406550759575

10013065

110145

5555606060707070909090

5255

30501540705

2560

3535404040505050757575

Plug & drill Ø(mm)

Length(mm)

UsableDrilling Depth(mm)

Length(mm)

SettingDepth Min.

(mm)5406060807001

555506060707

55151525153

535304040505

8801012121

2.53.35.58.0

90.0100.0120.0140.0

10.013.017.0---

10.013.015.019.0

8.025.040.050.0

4.205.30

12.8025.0

Distance to edge C (mm)

55.060.075.0

115.0

Tinst

Setting Depth

H eff

Length

Washer

MSpanner

Size

Drilling DepthUsable Length

Drill Ø

SAS

77

1 - Drill a hole and clean it with a brush, remove dust with a blower. | 2 - Insert the sleeve anchor through the fixture into the hole. | 3 - Tighten to the recommended torque.






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

1

AHM Sleeve Anchor serutaeF

secnatsidecapsdnaegdellamS•• Torque controlled expansion• Zinc plated > 5µm• Through xing


noitallatsnI



htgnelelbasUmm

htpedgnitteSmin.mm

6M6M8M8M01M01M



Met

al P

rodu

cts

kat_en-2007-11-29.indd 58 4.12.2007 10:13:36 Uhr

Tension load (kN)

Type(Order No)

Shear load (kN)

Bending moment (Nm)


6M8M01M21M

2.03.05.0

5.7

105120150225


(hmin) mm

Tighten torque(Nm)

Spannersize (SAS)

Spannersize (SAB)

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

10101212

M6M6M8M8

M10M10

4560608070

100

555560607070

51515251535

353540405050

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

101010121212161616

M6M6M8M8M8

M10M10M10M12M12M12

406550759575

10013065

110145

5555606060707070909090

5255

30501540705

2560

3535404040505050757575

Plug & drill Ø(mm)

Length(mm)


Length(mm)

SettingDepth Min.

(mm)5406060807001

555506060707

55151525153

535304040505

8801012121

2.53.35.58.0

90.0100.0120.0140.0

10.013.017.0---

10.013.015.019.0

8.025.040.050.0

4.205.30

12.8025.0


55.060.075.0

115.0

Tinst

2




noitallatsnI



htgnelelbasUmm

htpedgnitteSmin.mm

6M6M8M8M01M01M



Met

al P

rodu

cts

kat_en-2007-11-29.indd 58 4.12.2007 10:13:36 Uhr

Tension load (kN)

Type(Order No)

Shear load (kN)

Bending moment (Nm)


6M8M01M21M

2.03.05.0

5.7

105120150225


(hmin) mm

Tighten torque(Nm)

Spannersize (SAS)

Spannersize (SAB)

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

10101212

M6M6M8M8

M10M10

4560608070

100

555560607070

51515251535

353540405050

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

101010121212161616

M6M6M8M8M8

M10M10M10M12M12M12

406550759575

10013065

110145

5555606060707070909090

5255

30501540705

2560

3535404040505050757575

Plug & drill Ø(mm)

Length(mm)


Length(mm)

SettingDepth Min.

(mm)5406060807001

555506060707

55151525153

535304040505

8801012121

2.53.35.58.0

90.0100.0120.0140.0

10.013.017.0---

10.013.015.019.0

8.025.040.050.0

4.205.30

12.8025.0


55.060.075.0

115.0

Tinst

3

With threaded bolt and nut.

SizeLength Drill (Ø)

Hole Ø in Fix-ture

Min.Drilling Depth

Min. Setting Depth

H eff.Max.

Usable Length

(mm) (mm) (mm) (mm) (Ø) (mm) (mm)

M6 49 8 10 29 27 25 20

M6 64 8 10 29 27 25 35

M8 60 10 12 34 32 30 25

M8 75 10 12 34 32 30 40

M8 105 10 12 34 32 30 70

M8 85 10 12 34 32 30 50

M10 73 12 14 44 42 40 25

M10 88 12 14 44 42 40 40

M10 108 12 14 44 42 40 60

M10 138 12 14 44 42 40 90

M12 100 16 18 64 62 60 30

M12 120 16 18 64 62 60 50

M16 165 20 22 84 82 80 70

Setting Depth H eff

Length

Washer

MSpanner

Size

Drilling Depth

Usable Length

Drill Ø

1 - Place the fixture (object) and drill a hole.| 2 - Remove dust with a blower and clean the hole with a brush.3 - Tap the anchor through the fixture with a hammer or a setting tool. | 4 - Tighten to the recommended torque.

1 - Drill a hole of requested diameter and depth. | 2 - Remove dust with a blower and clean the hole with a brush. 3 - Tap with a hammer or a setting tool until fixing depth is reached.| 4 -Tighten to the recommended torque.

1 22 33 44

2 3 41 2 3 4

Installation of Sleeve Anchor - SAS

Sleeve Anchor - SAB:

Installation ( push-through installation )

Installation ( pre-positioned installation )

78

Features:

• Suitable for use in cracked concrete or in non-cracked concrete and in natural stone.• Special design of the clip in stainless steel which ensures a safe hold in the hole.• Torque controlled expansion.• Zinc plated > 5µm.• User friendly, face fixing or through fixing.


Uni - channel, hand rails, steel construction, Cable Trays, supports, brackets, ducts and shelf feet.

Technical Data:

Through Bolt zinc plated (non-cracked C20/25).

Bolt SizeTension Load Shear Load Torque Moment

(kN) (kN) (Nm)

M6 2.1 1.9 4.0

M8 4.0 4.0 15.0

M10 5.9 5.95 30.0

M12 8.8 10.0 50.0

M16 12 16.0 100


Materials:

• Zinc plated steel. • Stainless steel [ SS 304 (A2) , SS 316 (A4) ].

THROUGH BOLT (WEDGE ANCHOR) - STB

Setting Depth H eff

Bolt Length

Washer

Drilling DepthUsable Length

Drill Ø






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

Through bolt




noitallatsnI



htgnelelbasUmm

htpedgnitteSmin.mm

6M6M8M8M01M01M



Met

al P

rodu

cts

kat_en-2007-11-29.indd 58 4.12.2007 10:13:36 Uhr

Tension load (kN)

Type(Order No)

Shear load (kN)

Bending moment (Nm)


6M8M01M21M

2.03.05.0

5.7

105120150225


(hmin) mm

Tighten torque(Nm)

Spannersize (SAS)

Spannersize (SAB)

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

10101212

M6M6M8M8

M10M10

4560608070

100

555560607070

51515251535

353540405050

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

101010121212161616

M6M6M8M8M8

M10M10M10M12M12M12

406550759575

10013065

110145

5555606060707070909090

5255

30501540705

2560

3535404040505050757575

Plug & drill Ø(mm)

Length(mm)


Length(mm)

SettingDepth Min.

(mm)5406060807001

555506060707

55151525153

535304040505

8801012121

2.53.35.58.0

90.0100.0120.0140.0

10.013.017.0---

10.013.015.019.0

8.025.040.050.0

4.205.30

12.8025.0


55.060.075.0

115.0

Tinst

SDB

Setting Data:

Edge distance > 1,5 H eff. , distance between anchors > 3 x H eff.Thickness of foundation > 2 x H eff.

Bolt Size

H eff.Edge

DistanceC


WasherThickness ofFoundation

hmin

Tightening Torque Spanner

Size

(mm) (mm) (mm) (Ø) (mm) (Nm)

M6 40 60 120 12 x 1.6 100 7 10

M8 50 75 150 16 x 1.6 100 14 13

M10 58 87 174 20 x 2.0 120 30 17

M12 68 102 204 24 x 2.5 140 35 19

M16 80 120 240 30 x 3.0 160 80 24

79

THROUGH BOLT (WEDGE ANCHOR) - STB






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

2






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

3

1 - Drill a hole and clean with a brush, remove dust with a blower. | Place the fixture and insert the through bolt with a hammer. | 3 - Tighten to the recommended torque.






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

1

Installation ( pre-positioned installation )

Installation Parameters:

Through bolt zinc plated, stainless steel or hot-dip galvanized.

Bolt SizeBolt Length Drill Ø

Hole Ø in Fixture

Drilling Depth Setting Depth H eff. Usable Length

Fix

(mm) (mm) (mm) (mm) (mm) (mm) (mm)

M6

40 6 6.5 35 27 ..... 3

55 6 6.5 35 35 35 15

70 6 6.5 35 35 35 30

95 6 6.5 35 35 35 55

M8

50 8 9 35 35 ..... 10

65 8 9 40 40 ..... 20

80 8 9 40 40 40 35

95 8 9 40 40 40 50

105 8 9 40 40 40 60

M10

65 10 11 40 40 40 15

80 10 11 50 50 50 20

95 10 11 50 50 50 35

115 10 11 50 50 50 55

120 10 11 50 50 50 60

M12

80 12 13 65 50 50 20

100 12 13 65 60 60 30

120 12 13 65 60 60 50

135 12 13 65 60 60 65

M16

105 16 18 85 70 70 15

140 16 18 85 80 80 40

180 16 18 85 80 80 80

220 16 18 85 80 80 120

H eff.= Effective anchorage depth

80

Features:

• Assembly detachable, multiple removing and fixing.• Low energy impact, power-saving assembly.• Force controlled expansion.• Flexibility inside threaded anchor.• Variable length and art of threaded rods or bolts.• By tightening the screw, the cone pulls into the sleeve and tense against the drill hole.• Small edge distance and small distance between anchor.• Expansion elements are held together by a spring.• Optimum taper nut angle for maximum expansion.• Pressed steel segment ensures consistent dimensional accuracy.• Provide a projecting stud to support fixture during installation and removal.• Suitable for use in concrete, natural stone, brick and sand stone.


For fixing: steel constructions, handrails, consoles, brackets, ladders, gates and spacing designs.

Technical Data:

(Recommended loads concrete C 20/25 and in brick work).

SizeDistance to Edge

CDistance Between

Anchors SMin. Thickness ofFoundation hmin

H eff.

(mm) (mm) (mm) (mm)

M6 52.5 105 70 35

M8 60 120 80 40

M10 75 150 100 50

M12 90 180 120 60

Materials:

• Zinc plated and die-cast.

Setting Data:

Edge distance > 1,5 x H eff., distance between anchors > 3 x H eff. Thickness of foundation > 2 x H eff.

Size

ConcreteBrick Work

Tension ShearTorque

ConcreteTorque Brick

Tension Shear

KN KN KN N.m N.m

M6 3.3 2.1 1.6 6.5 5.0

M8 4.8 4.4 2.1 15.0 7.5

M10 6.2 6.1 2.6 27.0 13.0

M12 9.7 12.4 3.9 50.0 23.0


SHIELD ANCHOR - SSA


secnatsidecapsdnaegdellamSTorque controlled expansionZinc plated > 5µmThrough xing


noitallatsnI



htgnelelbasUmm

htpedgnitteSmin.mm

6M6M8M8M01M01M



Met

al P

rodu

cts

kat_en-2007-11-29.indd 58 4.12.2007 10:13:36 Uhr

Tension load (kN)

Type(Order No)

Shear load (kN)

Bending moment (Nm)


6M8M01M21M

2.03.05.0

5.7

105120150225


(hmin) mm

Tighten torque(Nm)

Spannersize (SAS)

Spannersize (SAB)

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

10101212

M6M6M8M8

M10M10

4560608070

100

555560607070

51515251535

353540405050

Drill Ø(mm)

Size(mm)

Length(mm)

Usablelength(mm)

Drilling depth(mm)

Settingdepth min.

(mm)88

101010121212161616

M6M6M8M8M8

M10M10M10M12M12M12

406550759575

10013065

110145

5555606060707070909090

5255

30501540705

2560

3535404040505050757575

Plug & drill Ø(mm)

Length(mm)


Length(mm)

SettingDepth Min.

(mm)5406060807001

555506060707

55151525153

535304040505

8801012121

2.53.35.58.0

90.0100.0120.0140.0

10.013.017.0---

10.013.015.019.0

8.025.040.050.0

4.205.30

12.8025.0


55.060.075.0

115.0

Tinst

SSA

81

SHIELD ANCHOR - SSAInstallation

Installation Parameters:A- Using a hexagon screw: insert shield only, place the fixture over the hole and insert a hexagon screw with a washer through

the fixture.B- Using a threaded bolt and nut: insert the shield with a threaded bolt, position the fixture over the thread and add a washer

with a nut.A- Shield Anchor with Hexagon Screw:

SizeBolt Length Min.Drill Ø Shield Length Min. Hole Depth Setting Depth

H eff.

Usable Length Spanner Size


M6557085

12 45 50 35102540

10

M8658095

14 50 55 40102540

13

M107590

11516 60 65 50

102550

17

M1290

105120

20 75 85 60102540

19






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

11 22 33 44

1 - Drill a hole and clean it with a brush, remove dust with a blower.| 2 - Place the plug and the object to fix. 3 - Tighten the screw. | 4 - Fixing completed.

B- Shield Anchor with Threaded Bolt and Nut:

SizeThreaded

LengthMin. Drill Ø Shield Length

Min. Hole Depth Setting Depth

H eff.Usable Length Spaner Size


M66580

11512 45 50 35

102560

10

M8

7590

115125

14 50 55 40

10255060

13

M1090

105135

16 60 65 50153060

17

M12110125170

20 75 85 60153075

19

1 - Drill a hole and clean it with a brush, remove dust with a blower.| 2 - Place the plug and the object to fix. 3 - Tighten the screw. | 4 - Fixing completed.






Tension load (kN)

Shear load (kN)

Bending moment (Nm)


He�. (mm)



(mm)

Tighten torque(Nm)

Spanner size

6M 2.64.15.89.214

3.36.38.51223

5153050

100

5.513

26.546.5

118.5

4050586880

Washer (Ø)

12 x 1.616 x 1.620 x 2.024 x 2.530 x 3.0

02106 001 018M 05157 001 3101M 47178 021 7121M 402201 041 9161M 042021 061 42

noitallatsnI

2

03505604015660452086040459672505803010680501088055158805525980554511833506015301070185515901850301101855452101850604101850806101850010810194508218651011218603521218605541218607561218609581210701511610851031610803541610854061610856081610010306102


Plug & drill Ø(mm)

Length(mm)

UsableLength(mm)

Settingdepth min.

(mm)

kat_en-2007-11-29.indd 50 4.12.2007 10:12:24 Uhr

Bolt Size

Tinst

2 3 41

82

www.sfsp-ikk.com

83

HOW TOORDER

84

Side Height Varieties

Cable trays are available in the following side heights:• 25 mm • 50 mm • 75 mm • 100 mm* Other side heights can be manufactured upon request.

-Abbreviations

Straight end STR

Return flange outside RFO

C - Type outside CTO

Return flange inside RFI

C - Type insideCTI

Materials & Finishes

Stainless SteelPre-GalvanizedAluminium

Hot-dip GalvanizedElectrolytic GalvanizedPowder Coated

Thickness

Sheet of 1.0 mmSheet of 1.20 mm Sheet of 1.50 mmSheet of 2.0 mmSheet of 5.0 mm

Code

SSPGAl

HDEGPC

Code

12345

For more information on ordering and types, Uni-Metal technical staff are ready to assist you with all necessary details. www.unimetal-ikk.com

Cable trays and accessories are available in the following side height types:

ORDERING CABLE TRAY

85

General Information

Location of Couplers

Item & Order Number for Sections & Fittings

When ordering cable trays, the full order number shall include the material used, width of the tray, side height, type of side and the length of the tray.

Consideration shall be given to the following factors when undertaking the design of a cable tray run and a support system, although some of these (ex: wind loads) may not be relevant to every installation :

In practice, it is often difficult to pre-determine where the couplerswill be located within a straight run of a cable tray.However, it is worth making some efforts to roughly plan their position during the early stages of installation. The worst positions of the couplers are either at mid-span or immediately over a point of support; at these locations they will suffer the greatest stress.Both locations shall be particularly avoided at the end of an installation. From a practical viewpoint it is also more difficult to assemble or fix down a tray if the couplers are positioned immediately over the supports.The best position of joints in a continuous installation is one quarter of the span distance on either side of each point of support.

Examples:1- Order number for Hot-Dip Galvanized 2,400 mm length cable tray, 50 mm side height, 2mm sheet thickness and 500 mm width with outside return flange:130 050 0500 4/RFO 2400 PG PC

2- Order number for Pre-Galvanized 3,000 mm length cable tray, 50 mm side height, 1.25 mm sheet thickness and 300 mm width with inside return flange:110 050 0300 2/RFI 3000 PG PC

3- Order number for powder coated curved T-branch, 50 mm side height, 1.5 mm sheet thickness and 700 mm width with straight end:320 050 0700 3/STR PG PC

N.B.: Order number for connectors will include the item number, side height and thickness of the sheet

• Distributed loads e.g. cables, pipes.• Point loads• Thermal expansion & contraction• Wind & external forces

• Spacing of supports• Safety factor• Deflection

S/4

S

ORDERING CABLE TRAYS & ACCESSORIES

86

www.sfsp-ikk.com

87

LOCATIONS

88

OUTLETS

FACTORIES

SFSP - [email protected]

SFSP / Kingdom of Saudi ArabiaSpecialized Factory for Steel Products - 3rd Industrial City / JeddahTel: +966 12 637 4482Fax: +966 12 636 1963

Specialized Factory

www.sfsp-ikk.comfor Steel Products Co. Ltd

Sale Distributors

Kigdom Of Saudi Arabia [email protected]

Jeddah Tel : +966 12 627 8222Fax: +966 12 627 8722

Jeddah - Ghurab Showroom Tel : +966 12 667 2000Fax: +966 12 661 4306

Mak kah, TaifTel : +966 12 541 1206Fax: +966 12 532 1675

Riyadh NorthTel : +966 11 415 5465Fax: +966 11 456 6627

Riyadh SouthTel : +966 11 448 0112Fax: +966 11 447 7421

Riyadh - WestTel : +966 11 431 6271Fax: +966 11 431 7642

Qassim / BuraidahTel : +966 16 382 3946Fax: +966 16 385 2186

Qassim ShowroomTel : +966 16 385 2598Fax: +966 16 385 4262

Hafr el BatinTel : +966 13 729 3644Fax: +966 13 729 3644

HailTel : +966 16 543 3931Fax: +966 16 543 3935

Skakah / QurayyatTel : +966 14 626 3904Fax: +966 14 626 3905

TabukTel : +966 14 423 5203Fax: +966 14 423 5203

Khamis MushaytTel : +966 17 237 5929Fax: +966 17 237 8783

NajranTel : +966 17 546 3873Fax : +966 17 546 3873

SharorahTel : +966 17 532 8153Fax: +966 17 532 8153

Al -BahaTel : +966 17 237 5929Fax: +966 17 237 8783

GizanTel : +966 17 321 6660Fax: +966 17 321 0665

Al QunfudahTel : +966 17 7350 266Fax: +966 17 7350 266

Mad inahTel : +966 14 842 1095Fax: +966 14 842 1090

Mad inah Showroom - UPF Tel : +966 14 834 6244Fax: +966 14 834 5082 YanbuTel : +966 14 390 1499Fax: +966 14 322 7101

DammamTel : +966 13 859 0097Fax: +966 13 857 8177

Dammam / Showroom Tel : +966 13 834 9300Fax: +966 13 834 9457

JubailTel : +966 13 361 4390Fax: +966 13 362 4499

Hufuf Tel : +966 13 530 1474Fax: +966 13 530 7144

Hufuf / ShowroomTel : +966 13 586 9732Fax: +966 13 530 7144

89

FACTORIES

Sale Distributors

SFSP / [email protected]

SIGMA Factory for Steel Products - DIC (Dubai Industrial City)Tel : +971 4 818 1919


Specialized Factory for Steel Products Lot No. 235 A- 3rd industrial zone 2nd service road 6th of October City Giza Tel : +20 2 3820 6477Fax: +20 2 3820 6036


Specialized Factory for Steel Products / s.a.r.l Tanayel, BekaaTel: +961 8 514 290Fax: +961 8 514 291

Bahrain [email protected]

Manama / Bahrain Tel : +973 17 874 897Fax: +973 17 789 470

[email protected]

Kuwait City / Kuwait Tel : +965 2 4924 937Fax: +965 2 4924 938

United Arab EmiratesDubai -Al Rashidiyah / [email protected] : +971 4 2591 773Fax : +971 4 2591 774

Dubai - DIC / UAE Tel : +971 4 8181 900

Abu Dhabi - Musaffah / [email protected]: +971 2 552 3393Fax: +971 2 552 5499

[email protected]

Beirut / LebanonTel : +961 1 858 277Fax: +961 1 858 276

[email protected]

Muscat / OmanTel : +968 24 591 006Fax : +968 24 597 006

[email protected]

Amman / JordanTel : +962 6 556 3030Fax: +962 6 554 7911

AqabaTel : +962 6 556 3030Fax: +962 6 554 7911

[email protected]

Cairo 6th of October City / EgyptTel : +20 2 3820 6477Fax: +20 2 3820 6036

ENGINEERING, DESIGN, MARKETING & MULTIMEDIA

Unitech Deutschland [email protected] Tel : +49 711 6868 7222 Fax: +49 711 6868 7223

Multi-D s.a.r.lLebanon [email protected] Beirut Tel : +961 1 841 155Fax: +961 1 841 156

92

PP-CT-SVCT10-M17

www.sfsp-ikk.com

SFSP makes every effort to maintain the accuracy and quality of the information provided in this Catalogue.

However, SFSP cannot guarantee and assumes legal liability or responsibility for the accuracy or completeness of the information provided.

Whilst every care has been exercised in the preparation of this catalogue to ensure that any advice, recommendations or information is accurate, no liability or responsibility of any kind is accepted.

Project working details should be entrusted to appropriately qualified and experienced persons, case by case.

With a policy of continuous product development, SFSP may modify product design and specification without due notice.

In case of any questions or remarks, feel free to contact the R&D Department.

DISTRIBUTED BY:

cable tray - unitech-ikk.com · 5 specialized factory for steel products co. ltd specialized...

Documents