cad week 02 slide
TRANSCRIPT
-
8/14/2019 CAD Week 02 Slide
1/20
Week 2
Editing & Modifying Sketches:
-
8/14/2019 CAD Week 02 Slide
2/20
Kulliyyah of EngineeringInternational Islamic University
MME 1102MME 1102COMPUTER AIDED DRAFTINGCOMPUTER AIDED DRAFTING
Section 2Section 2
-
8/14/2019 CAD Week 02 Slide
3/20
-
8/14/2019 CAD Week 02 Slide
4/20
Extend FigureExtend Figure
is used to extend the sketched entity to intersectthe next available entity.
The sketched entity is extended up to itsintersection with another sketched entity or amodel edge.
Sketched entities beforeextending
Sketched entities after
extending
Entities to be selectedfor extending
-
8/14/2019 CAD Week 02 Slide
5/20
Trim Figure Trim Figure
To remove unwanted intersect portion To remove unwanted intersect portionof a sketched elementof a sketched element
-
8/14/2019 CAD Week 02 Slide
6/20
Entities to be trimmed Sketch after trimming theentities
-
8/14/2019 CAD Week 02 Slide
7/20
2D Fillet2D Fillet
To create a corner between 2 intersection To create a corner between 2 intersectionwith a given radiuswith a given radius
Sketched entities beforeand after filleting
Sketched entities beforeand after filleting
-
8/14/2019 CAD Week 02 Slide
8/20
2D Chamfer2D Chamfer
To create a chamfer of a figure with a To create a chamfer of a figure with agiven distance.given distance. Default 45 degree.Default 45 degree.
Entities to be selectedfor chamfering Distance of chamfering
Entities to be chamfered Sketched entities after chamfering
-
8/14/2019 CAD Week 02 Slide
9/20
MirrorMirror
Creating a reflection copy of the figureCreating a reflection copy of the figureabout an axis lineabout an axis line
-
8/14/2019 CAD Week 02 Slide
10/20
MoveMove
is used to move the selected entitiesfrom its base location to a desiredlocation.
Start point of translationEnd point of translation
-
8/14/2019 CAD Week 02 Slide
11/20
RotateRotate
is used to spin the selected entitiesfrom its base location to a desiredlocation.
Centre point of rotation
-
8/14/2019 CAD Week 02 Slide
12/20
RepeatRepeat
While sketching the base feature of a model,sometimes you may need to place the sketchedentities in a particular arrangement such asalong linear edges or around a circle.
Base feature with slots createdabout linear edges
Base feature with slotscreated around a circle
-
8/14/2019 CAD Week 02 Slide
13/20
Repeat: LinearRepeat: Linear
original
horizontallinearpath
verticallinearpath
-
8/14/2019 CAD Week 02 Slide
14/20
-
8/14/2019 CAD Week 02 Slide
15/20
Practice W2-1Practice W2-1In this practice, you will draw the sketch shown in Figure B on one sideand then mirror it on the other side. The solid model is given only foryour reference. Use Dimension tool to dimension the sketch accordingly.
Figure A Model for Practice 1-1 Figure B Sketch of Practice 1-1
-
8/14/2019 CAD Week 02 Slide
16/20
Practice W2-2Practice W2-2In this practice, you will draw the sketch of the model, as shown in Figure A . The sketch is
shown in Figure B using Profile and Rectangle tool . You will not dimension the sketch.The solid model and the dimensions are given only for your reference.
Figure A: Solid Model for Practice 1-2 Figure B: Sketch of the Model
-
8/14/2019 CAD Week 02 Slide
17/20
Class Assignment W2-1Class Assignment W2-1Save as: c1w1.CATpartSave as: c1w1.CATpart
Draw the sketch of the model shown in Figure A . The sketch to be drawn is shown inFigure B . Complete the drawing with correct dimensions by adjusting grid spacing to 10mm .
Figure A : Solid model for ClassAssignment W1
Figure B : Sketch of the model
Submit your class assignment (filename indicate above) at
http://10.101.230.65:8080/cad.php
-
8/14/2019 CAD Week 02 Slide
18/20
Class Assignment W2-2Class Assignment W2-2 Draw the sketch
using the toolsusing the toolsyou haveyou havelearned so far.learned so far.
Submit your class assignment (filename indicated above) at
http://10.101.230.65:8080/cad.php
-
8/14/2019 CAD Week 02 Slide
19/20
Home Assignment W2-1Home Assignment W2-1 Save as: h1w1.CATpartSave as: h1w1.CATpart
Complete the drawing in Figure B with correct dimensions using all the tools thatyou have learned previously.
Figure A : Model for Home Assignment 1
Figure B : Sketch for Home Assignment 1
To be submitted on Week 2 class at http://10.101.230.65:8080/cad.php
-
8/14/2019 CAD Week 02 Slide
20/20
Home assignment W2-2Home assignment W2-2Draw one segment of theobject and use the tools todraw all segments andcomplete the sketch
1.Constructionline
2. Circle
3. Circle
To be submitted on Week 3 class at http://10.101.230.65:8080/cad.php