camx2016-textile applications using thermoplastic towpreg
TRANSCRIPT
Flexible Thermoplastic
Towpreg For Textiles
Robert Davies
CEO, Fibrtec Inc.
Anaheim Convention Center | Anaheim, California, USA
Company History
• Fibrtec was formed in 2008 in Florida to
commercialize patented thermoplastic
composite materials
• In 2013 we moved to Atlanta, TX.
• Modern 50,000 SF Facility
Continuous Fiber TP Prepreg Processes • Most TP Prepreg Processes Require Costly Conversion of
Resin To Adapt To The Process
– Solution
– Powder
– Film
– Fiber or Filaments
Source: Wakeman, M.D., Månson, J-AE, Design and Manufacture of Textile Composites, Chapter 6, 2005.
Fibrtec’s Low Cost Solution
• FibrFlex process utilizes thermoplastic
resin pellets as supplied
– Directly extruded on the fiber – Carbon, Glass
Aramid tows.
– No Resin Conversion = low cost
– No Tape Slitting, further reducing cost
– Rapid consolidation during molding
10 - Fibrflex® Towpreg Cross section
12 - Fiber Not Coated
14 - Extruded Resin Sheath
16 – Partially Coated Fiber
Uniquely Flexible Tow Construction
Adaptable to Basic Textile
Processes
UD Fabrics and Tapes
Woven Fabrics
Braided Sleeves
Tow Placement
Filament winding
Hybrid Preforming with FibrFlex
7
Mix: Woven Fabrics + UD Fabrics
Combine Tailored Fiber
Placement with Fabrics
Stack Multiple Plies & Cut Net Shape
Unlimited down
stream Options
Example Parts Made From TPC
Towpreg
Side covers on sight made with PEEK/Carbon Fiber
IED Detector -Nylon/Carbon Fiber
Crew Seat Bottom for Commercial Airplane -PPS/Fiberglass
Complex Geometry Parts Nylon/Carbon Fiber