Canon EOS Rebel T4i Flash ReplacementIn this guide, users will be able to take apart the flash piece of the camera.

Written By: Jordan Rabold

Canon EOS Rebel T4i Flash Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

INTRODUCTION

This guide details how to replace the flash bulb of this camera.

TOOLS:Tweezers (1)

Flush Wire Cutters (1)

Phillips #000 Screwdriver (1)

Canon EOS Rebel T4i Flash Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

Step 1 — Battery

Locate the battery cover at thebottom of the camera.

Pull down on the black tab to openthe cover.

Step 2

Push the grey tab on the right side ofthe battery.

Remove the battery from the slot.

Canon EOS Rebel T4i Flash Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

Step 3 — Flash

Using the Phillips screwdriver,unscrew the two 4.9mm Phillipshead screws which are locatedunderneath the flash.

Step 4

Remove the covering.

Canon EOS Rebel T4i Flash Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-18 02:37:17 AM.

Step 5

Use the tweezers to remove theexcess glue around the wiring. Thiswill allow you to cut the wire andremove the light in the next step.

Step 6

Use the wire cutters to cut the wiringconnected to the flash.

Canon EOS Rebel T4i Flash Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5