capital training adult course prospectus

ctCAPITAL TRAINING

(SW) LIMITED

Capital TrainingAdult Course Prospectus

www.capitaltrainingsw.com

Units 11-12 Eastgate Business Park,Wentloog Avenue, Cardiff, CF3 2EY

02920 365625

CLICK!

Choosing a course let alone actually enrolling to do it is one of life’s educational challenges, and that’s one of the reasons why at Capital Training we’ve decided to offer a variety of courses that can be joined to ensure that you the learner, discover and develop your full training potential, so when you leave our training centre, you can achieve high potential job prospects or even start up your own business.

Whatever your ambitions, we will ensure you receive full information, advise and guidance. For example if you enrolled on a course in Brick-laying, however you had no experience of ever laying a brick, nevertheless your long-term ambitions were to be self employed, we would encourage you enrol on a package course, where you’d learn bricklaying, plastering and rendering, on top of that we would ask you to look into computer skills that would help with any business.

If you were simply looking for training in short DIY courses or courses to help you get a job, Capital Training, will get you there, we have the contacts to point you to, in regards to funding, or other needs you may require. Whatever your experience, you have made the right choice, and we at Capital Training hope you have a great training experience that lets your doors to a successful career, fully open.

1. Basic Plumbing 17. Plastering2. Bathroom Installation 18. Power Tools3. Bricklaying 19. Wall & Floor Tiling4. Carpentry 20. Womens Only DIY5. Floor Covering 21. PTLLS6. DIY 22. Health & Safety (CSCS)

23. IOSH24. NEBOSH25. Social Care

7. Basic Electrics8. 17th Edition9. 2391-1010. 2392-1011. Part P12 . PAT Testing13 . Kitchen Fitting14 . Labourers Course15 . Painting & Decorating16. PASMA

ctCAPITAL TRAINING

(SW) LIMITED


Capital TrainingAdult Course s

http://www.youtube.com/watch?v=SpfzVDHmuE0&feature=player_embeddedhttp://www.youtube.com/watch?v=3C2v3h7deEM&feature=player_embedded

BasicPlumbing

02920 365625

Watch a Clip

Duration: 1 Week Mon - Fri 09:00 am - 4:00 pmLocation: Cardiff

This intensive 5 day course has been designed to both equip candidates with underpinning knowledge and an understanding of the practical skills required to cope with basic and/or emergency plumbing tasks. On completion candidates will receive an Agored Cymru Accreditation (OCN).

Course Details

Day 1

• Health and safety• Explain plumbing parts and tools • Demonstrate how to do basic measurements in mm• Demonstrate how to use pipe benders • Start to make bends for angles • Start practicing measuring in mm

Day 2

• Demonstrate how to solder using scrap pieces of pipe• Solder bends, tees, reducers and connectors in 22mm

and 15mm pipe• Recap over the two days answering any questions that

may arise

Day 3

• Lecture on building regulations for notching and drilling of Joists

• Demonstrate how to notch and drill a Joist correctly• Lecture on 1st fix / carcus Installation, quoting• Industry standards for pressure testing, using a scale

drawing (plans)

Day 4

• Lecture on the different hot water systems, and how to shut off the supply

• Lecture on cold water systems, and how to turn of the supply

• Strip down and reassemble pillar taps.• Strip down and reassemble ball valve.

Day 5

• Show different types of traps and how to maintain them.

• Recap all of the above answering any questions that may arise.

• Learners to take multiple choice questions on hot and cold water supplies (40 questions each subject, 1 hour period for each)

• Recap on the test results and give explanations• Lecture on building regulations for soil and waste pipe

requirements


BathroomInstallation

02920 365625

Ask us a question...

www.capitaltrainingsw.com/form.asp?i=6

?click below ct

CAPITAL TRAINING(SW) LIMITED

CLICK!

Cost: £500 ex VATDuration: 1 Week Mon - Fri 09:00 am - 4:00pmLocation: Cardiff

This 5 day basic course has been specially designed by Capital Training (SW) to equip you with both the underpinning knowledge and an understanding of the practical skills required to completely decommission and install a new bathroom suite.

No previous experience is required to take part in this course. This course is suitable for anyone who is looking to complete a DIY project or who is looking to move forward and develop a career change.

Our Bathroom fitting training and its department adheres to City & Guilds Requirements; therefore ensuring excellent facilities are in place for you to work through this intensive course. Our classes are small to ensure every one gets the benefit of our instructor’s knowledge and time for any questions that you may have. Once you have completed the course our instructors are a phone call away for any difficulties you may come across, they are here to help.

Course Details

• An introduction to plumbing regulations• The correct usage of plumbing tool, equipment & blow

lamps• An oversight of plumbing materials • Tap & waste trap maintenance• Removal & installation of copper and plastic pipes• Removal & installation of sanitary wear• Drain down water system• An introduction to copper & plastic pipe-work jointing • Pipe-Bending

What do you need to bring?

All tools and equipment will be fully provided and demonstrated. You will need to wear safety boots for the duration of the course - you can either supply these yourself or purchase them from us at a cost of £15.

On completion of the course you will receive either a Capital Training (SW) certificate of competency or OCN Accreditation, helpful notes and a photographic portfolio showing the stages of the work you have carried out during the period you have trained with us. Throughout your training all tools and equipment will be fully provided and demonstrated.


Bricklaying

02920 365625

http://www.youtube.com/watch?v=rKPmAvbgWgs&feature=player_embeddedWatch a Clip

5 Day

Duration:1 Week Mon - Fri 09:00am - 4:00pmLocation: Cardiff

The Bricklaying course is a 1 week course with the outcome of an Agored Cymru (OCN) Accreditation.

Course Details

• Correctly mixing mortar and stacking out materials• Laying bricks to a line by setting out your building lines

correctly and gauging your work• Plumbing your walls correctly and ensuring that they are square• Building corners • Using various joint finishes i.e. bucket handle, struck joint and

raked out• The different types of bonds used in 9" and 4" walls

10 Day

Duration: 2 Weeks Mon - Fri 09:00am - 4:00pmLocation: Cardiff

The Bricklaying course is a 2 week course with the outcome of an Agored Cymru (OCN) Accreditation.

Course Details

• Correctly mixing mortar and stacking out materials• Laying bricks to a line by setting out your building lines correctly

and gauging your work• Plumbing your walls correctly and ensuring that they are square• Building corners• Using various joint finishes i.e. bucket handle, struck joint and

raked out• The different types of bonds used in 9" and 4" walls• Setting out arches

30 Day

Duration: 6 Weeks Mon - Fri 09:00am - 4:00pmLocation: Cardiff

This 6 weeks hands on City & Guilds Bricklaying course will see you progress from a beginner to a competent Bricklayer whilst building a portfolio of your work as you go. The course is designed to build your skills and confidence gradually until bricklaying becomes second nature. Our newly designed bricklaying division here at Capital Training’s new multifunctional training centre has been specifically designed to challenge you by teaching you to deal with the more difficult jobs that you unexpectedly encounter.

There are 7 mandatory Units and you must complete any 2 Units from the 7 optional units to achieve the FULL award.

The 7 Mandatory Units are:

045 - Working with stretcher bond walling 046 - Block wall 102.5mm thick 047 - Cavity wall with frame recess 048 - Timber frame faced with best brickwork 049 - Stepped foundation using trench blocks 050 - Cavity wall using pre-cast stone arch 051 - Brick and block gable end

The 7 Optional Units are:

030 - Semi-circled arch - rough ringed 052 - Single flue chimney and pot using DPC 053 - One brick thick Flemish bond with projection 054 - Attached pier in English garden wall bond 055 - One brick thick EGWB with oversailing course 056 - Course and random rubble stonework 057 - English bond manhole


5 Day Course

Duration: 1 Week Mon - Fri 09:00am - 4:00pmLocation: Cardiff

This course is suitable for anyone who is looking to complete a DIY project or perhaps who is looking to move forward and develop a career in Carpentry. On completion the candidate will receive an Agored Cymru Accreditation (OCN).

Course details

• How to use hand tools such as chisels, planes etc• How to cut basic joints• Cut and fit dado rails, architraves, skirting boards

and door furniture• Lay laminate flooring• Fit a door lining and/or frame• Hang a door• Fit door furniture

10 Day Carpentry Course Information Coming Soon

30 Day Carpentry Course Duration: Mon - Fri 09:00am - 4:00pmLocation: Cardiff

This is a six week course with a one week break off before new course commences. The course is City & Guilds Accredited (6217) Course details There are 6 mandatory Units and you must complete any 2 Units from the 3 optional units to achieve the FULL certificate.


• 001 Fixing skirting to a timber background• 002 Fixing floor joists and laying flooring• 003 Fixing door lining in stud partition or block work

opening• 004 Hanging an internal door• 005 Making a casement window • 058 Fixing and stabilising trussed rafters The 3 Optional Units are:

• 059 Accessing for carpentry and joinery• 060 Setting out and cutting one pair of common rafters• 061 Operating basic wood machines


Carpentry

02920 365625



?click below ct


CLICK!

Our Floor Covering courses are designed to teach the learner the basic understanding of tools, equipment, adhesives, laying as well as health & safety regulations. Candidates will also learn about and work on a variety of floor coverings such as carpet and vinyl. We run 5, 10 and 30 day courses.

5 Day


• Introduction to floor covering tools and health & safety• How to use tools• How to measure and mark out flooring and carpet• How to lay underlay for carpet and laminate• How to lay carpet grippers• Laying a small basic floor using carpet, vinyl, laminate and floor tiles• Preparing work area ready to secure vinyl• How to measure work area for laminate flooring• How to lay laminate flooring and cutting to work area• How to measure work area for floor tiles• How to lay floor tiles• How to use adhesives

10 Day

Cost: £850 ex VATDuration: 2 Week Mon - Fri 09:00 am - 4:00 pmLocation: Cardiff

• Introduction to Floor Covering tools & health & safety• How to use tools• How to measure and mark out flooring• Cutting flooring ready to be laid• Laying a small basic floor using vinyl, carpet, laminate or carpet tiles• Preparing floor area to secure coverings• Measuring and estimating correct materials• Marking work area to secure coverings• Laying coverings & basic floor using vinyl• Preparing work area ready to secure vinyl and laminate flooring• Mark out area to secure vinyl• Lay vinyl to correct specification• Welding joints to secure vinyl• Using adhesives and primers• Measuring work area for flooring• Lay underlay to secure laminate flooring

30 Day

Duration: 6 Weeks Mon - Fir 09:00 am - 4:00 pmLocation: Cardiff

Week 1

• Introduction to Floor Covering tools & health & safety• How to use tools• How to measure and mark out flooring• Cutting flooring ready to be laid• Laying a small basic floor using vinyl, carpet, laminate or carpet

tiles

Week 2

• Removing existing floor materials• Preparing floor area to secure coverings• Measuring and estimating correct materials• Marking work area to secure coverings• Cutting coverings to size ready to be laid• Laying coverings & basic floor using vinyl

Week 3

• Preparing work area ready to secure vinyl• Measuring and estimating correct materials• Mark out area to secure vinyl• Lay vinyl to correct specification• How to prepare work areas for screeding• Using primers and latex screeds• Welding joints to secure vinyl• Laying a small basic floor

Week 4-6

• Using adhesives and primers• Using latex screeds• Preparing work area ready to secure laminate flooring• Measuring work area for flooring• Lay underlay to secure laminate flooring• Laying basic floor using vinyl, laminate and carpet• Using floor profiles• Assessment for all flooring coverings

Floor Covering

www.capitaltrainingsw.com02920

365625

http://www.youtube.com/watch?v=P4jL1E3bfnE&feature=player_embeddedWatch a Clip

02920 365625


Handy Person (DIY)

Short Courses Duration: 1 - 2 Weeks Mon - Fri 09:00am - 4:00pm

Location: Cardiff

This course is designed to give you the learner a wide range of hands on experience within the construction industry. Please note course content may change depending on tutors availability.

Course details • Introduction to carpentry• Introduction to tiling• Introduction to electrics• Introduction to plumbing• Introduction to floor covering

• Wall paper hanging• Painting and decorating• Introduction to motor mechanics• Basic I.T. (Microsoft office)• Bricklaying• Courses are subject to change dependant on tutor

availability

Advanced Courses

We are keen for anyone interested in a Handyperson course to be able to undertake as many modules as they wish and so have made this as affordable as possible.

With this in mind Capital Training are offering the following modules:

• Tiling• Kitchen Fitting• Carpentry• Plumbing• Bathroom Installation• Bricklaying • Plastering• Electrical Installation • Painting & Decorating• Floor Covering

You can choose between 4 and 10 of these modules - One Module = One Week

Any 4 Modules @ £2,200* = £550/Subject - 4 week course




* Plus VAT

For a detailed description of each modules please visit our website.

Optional Courses Include:



?click below ct


• Safe Isolation procedures.• Basic domestic circuits• Replacing a plug top, connections, size

of fuses and Faults. • Changing Switches and Dimmers.• Changing Lampholders, pendants and

flexes.• An overview of basic electrical cables,

Fuses, MCB, and consumer units.

At Capital Training (SW) Limited we offer hands-on practical Electrical training. This 2 day short course is designed so that you are involved at every stage and are participating throughout to acquire both knowledge and skills. All aspects of your training will be provided in our purpose built construction training centre. This ensures the standard of training given by our highly skilled instructors is of the highest quality and is equal to everyone, regardless of age, ability or gender. Our Electrical training and its department adheres to City & Guilds requirements, therefore excellent facilities are in place for you to work through this training course.

No previous experience is required to take part in this course. The course is suitable to anyone who is looking to complete a DIY project or who is looking to move forward and develop a career in electrical.

Duration: 2 Days 9:00 am - 4:00 pmLocation: Cardiff

Course Content

On completion of the course you will receive either a Capital Training (SW) certificate of competency or OCN Accreditation. Throughout your training all tools and equipment will be fully provided and demonstrat-ed. You may bring your own tools and test equipment with no liability to Capital Training SW Ltd.

What do I need to bring?

You will need to wear safety boots for the duration of the course - you can either supply these yourself or purchase them from us at a cost of £15.

BasicElectrics

Electricswww.capitaltrainingsw.com

02920 365625

ctCAPITAL TRAINING

(SW) LIMITED

• Selection & sizing of cables• Bonding requirements• Layout of the regulations• New definitions• Use of tables & graphs• Special locations• All additions & alterations

to regulations (Update only)

Course Details

The course is intended for practising electricians or anyone who works within the electrical industry, this could include company managers, design engineers, supervisors, maintenance engineers, part trained plumbers and many more. It is also suitable for anyone who simply wants a basic knowledge of the wiring regulations.

Course Aims

To gain an understanding of the 17th Edition wiring regulations and become familiar with the layout, content and use of the regulations book. When applying for the update learners should possess C & G 2381 16th edition qualification, C & G 2356, C & G 2330 Level 2 or 3 installation (building & structures) or equivalent, C & G 2360 Level 3 part 2, certificate must be from January 2004 onwards. C & G 2351 certificate in knowledge of electrical installation engineering.

Full Course


Update Course

Duration: 1 Day 9:00 am - 4:30 pmLocation: Cardiff


You will need to bring a copy of the 17th Edition Regulations Book for use during the training and the two hour open book exam. A copy of the relevant certificate e.g. City & Guilds 2381, must be provided to the centre on the day.

Course Details

17th EditionWiring Regulations

Electrics


02920 365625

CLICK!

• Complete necessary certificate, Reports and Schedules

• Instruments, checks, compliance and characteristics

• Test sequence and all tests required• Test results, appropriate tables• Practice exam questions• 3 hour practical exam• Design project exam• Written exam ( to be arranged with the

City and Guilds)

Course Details

At Capital Training (SW) Limited we offer hands-on practical Electrical training. This 5 day intensive short course is designed so that you are involved at every stage and are participating throughout to acquire both knowledge and skills.

All aspects of your training will be provided in our purpose built construction training centre. This ensures the standard of training given by our highly skilled instructors is of the highest quality and is equal to everyone, regardless of age, ability or gender. Our Electrical training and its department adheres to City & Guilds and CAA requirements, therefore excellent facilities are in place for you to work through this intensive training course.

Some previous experience is required to take part in this course. The course is suitable to anyone who is looking to complete a Level 2 Inspection, Testing and Commissioning Qualification.


Course Content

On completion of the course you will receive a City & Guilds 2391-10 certificate of competence. Throughout your training all tools and equipment will be provided and demonstrated. If you wish to bring your own tools and or test equipment, you can do so with no liability to Capital Training SW Ltd.


You will need to wear safety boots for the duration of the course - you can either supply these yourself or purchase them from us at a cost of £15. A copy of 17th Edition BS 7671 Regulations, a copy of the On Site Guide and a copy of The IEE Guidance Notes 3 (Inspection & Testing).

2391-10(Inspection, Testing and Commissioning)

Electrics


02920 365625

CLICK!


• Preparation for Testing of Domestic Installation

• An overview of 3 phase• Initial Verification• Related Documentation – Electrical

certificates, Minor works certificate, Pe-riodic Report, Test schedule, Inspection Schedule.

• Earthing Conductors and Systems • Test Sequence • Test Results and Procedures

The aim of this course gain an understanding of initial verification, inspection, testing and documentation for quality installation. On completion of the course you will receive a City & Guilds 2392-10 certificate of competency.

Course Details

This course is aimed at the qualified domestic installer or qualified electrician working towards 2391, working in the electrical industry, this includes company manager, supervisors, maintenance engineers and many more. It is also suitable for anyone with prior knowledge of electrical installation.


Toe protective boots, overalls are optional. A copy of BS7671 17th Edition, On-site guide and guidance note 3.


Course Content

Electricswww.capitaltrainingsw.com

02920 365625

ctCAPITAL TRAINING

(SW) LIMITED

2392-10(Fundamental Inspection, Testing and Initial Verification) CLICK!

• Use hand tools, installation techniques, etc.• Install different wiring systems and containment.• Identify materials and quantities.• Fault diagnosis and rectification.• Overview of three phase installations• Test, inspect and commission domestic

installations.• Heath and safety, Electrical principles, Electrical

regulations and Building regulations.

Course Details

No previous experience is required to take part in this course. The course is suitable to anyone who is looking to gain competence as a Domestic Installer whether you are a plumber, kitchen fitter or someone who is looking to start their own business and move forward and develop a career as an electrician.



You will need to wear safety boots for the duration of the course - you can either supply these yourself or purchase them from us at a cost of £15. Overalls are optional.

Course Content

Part P

Electrics


365625

ctCAPITAL TRAINING

(SW) LIMITED

On completion of the course you will receive either a EAL certificate of competency as a domestic installer. Throughout your training all tools and equipment will be fully provided and demonstrated, you are welcome to use your own tools and test equipment (with no liability to Capital Training SW Ltd).


• Law of management of electrical equipment maintenance

• Types, use and testing of electrical equipment• Procedures, documentation and

responsibilities• Appropriate testing and instruments used.

Course Details

The course is intended for practising electricians or anyone who works within the electrical industry, this could include company managers, supervisors, maintenance engineers and many more. It is also suitable for anyone who simply wants knowledge of the inspection and testing of electrical equipment (portable appliances) .


Course Aims

To gain an understanding of the 2377 inspection & testing of inserviced electrical equipment and become familiar with the content of PAT Testing book. Sure knowledge of electrical systems and electrical hazards would be an advantage. On completion of this course you will receive a City and Guilds 2377 Certification of competency.


You will need to bring a copy of the Code of Practice for In-service Inspection and Testing of Electrical Equipment 3rd Edition.

Course Content

PATTesting Portable Appliance Testing-2377

Electrics


365625

ctCAPITAL TRAINING

(SW) LIMITED

CLICK!


This course is suitable for anyone who is looking to complete a DIY project or perhaps who is looking to move forward and develop a career in Kitchen Fitting. On completion the candidate will receive an Agored Cymru Accreditation (OCN).

Course Details

• Selecting the right units for a kitchen, reading manufacturers scale drawing and planning of a basic kitchen layout

• Marking, setting out and levelling of units to a Datum line

• Assembling and fixing base and wall units

• Practice scribing then cutting of a 45 and/or 90 degree masons mitres using a work top jig and router

• Cutting inserts for sink and hobs in workshops

• Hanging doors and templates for fitting of door furniture

• Marking, cutting and fixing of cornice, pelmet and plinth

• Health and safety requirement for personnel protective equipment (PPE) + the building regulations applicable to kitchen fitting in respect of electrics and water

About Capital Training Here at Capital Training Skill Centre we aim to give you the best facilities and training that you can get. We have a wide range of workshops with fully qualified tutors and technicians’ available to you to pass on their knowledge and skills.

At Capital Training we believe that we are Unique with our facilities, training flexibilities, tutors and enthusiasm for the variety of courses and teaching - whether it is tiling, bricklaying, hair and beauty, plumbing, IT or any other of our wide range of workshops.

Once you start, you will go through a training rota that has flexibility and progression. Whether it’s just up-skilling, short courses, day/night course, weekend course, basic DIY or advanced level training, Capital Training can cater to your needs.

Kitchen Fitting

www.capitaltrainingsw.com02920 365625

http://www.youtube.com/watch?v=VzyUB6yc_N0&feature=player_embeddedWatch a Clip


This course is designed to give you the learner a wide range of hands on experience within the construction industry and working on a live sites, whilst being aware of the health and safety site regulations.

Course details

• Observe the work place and surrounding area• Find out where the nearest water supply and

electrical supply are situated• Look for any dangers or hazards, roads, overhead

cables, parked cars etc• If materials or plant are being delivered look for the

safest and most convenient drop off position• Setting out of materials for 1. Brick wall 2. Block

wall 3. Cavity wall• Correct method for loading materials for ground

floor job/project

• Correct method for loading materials on a scaffold or working platform

• Correct way to load and unload wheelbarrow for 1. Bricks 2. Blocks 3. Mortar

• Correct way of loading and unloading mixer with 1. Sand, cement and water 2. Sand, cement, lime and water

• Correct way of adding plastercizer by liquid or powder

• Correct method of loading mortar/spot board• Correct method of cleaning 1. Walls 2. Mortar

droppings 3. Mixer 4. Wheelbarrow and tools • If the job/project is on going the correct way to protect

the work already carried out and cover and protect the materials for the next site/project visit

• Ensure the materials are stacked and loaded correctly for the protection of other operatives and the general public

• In addition to this practical training that has been specifically designed to provide you with the knowledge and skills to source employment as a site operative; you will also receive a City & Guilds Power Tools Qualification and undertake CSCS training and testLabourers

Course




?click below ct


CLICK!

http://www.youtube.com/watch?v=Qbsbh-_A324&feature=player_embedded

5 Day Course

10 Day Course

Duration: 2 Weeks 9:00 am - 4:00 pmLocation: Cardiff

• An introduction to the tools required for the job• An introduction to powder & ready made fillers• An introduction to water & oil based paints• Wall and ceiling preparation• How to cut in and roll walls and ceilings• How to cut in and roll wall with different colours• Learning what paints to use for different surfaces• The preparation of woodwork• Introduction to the painting of woodwork with oil based paints • The preparation of walls ready for wallpaper hanging• How to set out, match pattern and hang wallpaper

30 Day Course

Duration: 6 Weeks Mon-Fri 9:00 am - 4:00 pmLocation: Cardiff

This intensive 5-6 weeks hands on City & Guilds Painting & Decorating course will see you progress from a beginner to a competent Painter & Decorator whilst building a portfolio of your work as you go. The course is designed to build your skills and confidence gradually until painting & decorating becomes second nature. Our newly designed painting & decorating division here at Capital Training has been specifically designed to challenge you by teaching you to deal with the more difficult jobs that you unexpectedly en-counter.

Course Details:

The 6 Painting & Decorating Mandatory Units are:

006 – Painting a timber window frame 007 – Applying emulsion to wall by roller008 – Painting doors and frames 009 – Applying oil based paint to walls by roller 062 – Removing and hanging wallpaper to walls 063 – Hanging paper to ceilings and painting

The 7 Painting & Decorating Optional Units are:

010 – Rust removal and priming metal 011 – Applying paint by spraying 012 – Introduction to glazing for painting and decorating 013 – Using broken colour techniques014 – Working with hardwood finishes 015 – Removing and refitting a water-filled radiator 064 – Introduction to artexing and coving

Duration: 1 Week 9:00 am - 4:00 pmLocation: Cardiff

• An introduction to the tools required for the job• An introduction to powder fillers & ready-made fillers• An introduction to water and oil based paints• Wall and ceiling preparation• How to cut in and roll walls and ceilings• How to cut in and roll wall with different colours• Learning what paints to use for different surfaces

On completion of the 5 or 10 day course you will receive either a Capital Training (SW) certificate of competency or an Agored Cymru Accreditation (OCN), helpful notes and a photographic portfolio

Painting& Decorating


Watch a Clip

Duration: 1 DayLocation: Cardiff centre and Company Sites The Pasma mobile aluminium tower training course is designed for managers, supervisors and operatives who may need to construct and or inspect Mobile Aluminium Towers.

Practical Session

• Erection of the tower• Full Inspection• Safe dismantling of the structure

Training Methods

Classroom based tutorials with the use of DVD & group participation combined with practical exercises. Delegates must successfully pass both theory & practical assessments.

Additional Information

Delegates should provide a NI number on the day of training, for production of ID cards. Full PPE is required on the day of training (Hard Hat, Safety Footwear & Gloves are optional). They must be physically & mentally fit to withstand the rigours of training.

Operator/Demonstrator

1a - Static Vertical1b - Static Boom3a - Mobile Vertical3b - Mobile BoomH - Harness

Health & Safety

• Health & Safety at Work Act 1974• Management Regulations - Risk Assessment• Working at heights Regulations• Provisions of Work Equipment Regulations• Manual Handling Regulations• Construction Welfare Regulations• Personal Protective Equipment at Work Regulations• RIDDOR• BS1139 Product Standard (BSEN1004)• BSEN1298 Mobile Tower Instruction Manual

Theory Session

• Tower Components Inspection• Erecting the Mobile Tower (3T/Advanced Guard Rail)• Tower Stability• inspection of Structure (Scaff tag)• Movement of Towers• Tower Dismantling• Hazards

Other Courses Available

• Half day low level course• Working at Heights• Module 2 Cantilever• Module 3 Bridging Units• Module 4 High Clearance• Supervisors Inspection• Ladder & Steps

PASMAMobile aluminium tower training course


CLICK!

http://www.youtube.com/watch?v=dM-NbHR91YA&feature=player_embedded

Rendering & Plastering - 5 day

Duration: 1 week Mon - Fri 09:00am - 4:00pmLocation: Cardiff

This one week course is designed to give you an insight into the plastering trade. It concentrates on the rendering and skimming elements of this extensive construction skill.

Plasterboarding & Skimming - 5 day


This one week course is designed to give you an insight into the plastering trade. It concentrates on the plasterboarding and skimming elements of this extensive construction skill.

Rendering, Plasterboarding & Skimming - 10 day

Duration: 10 Days Mon - Fri 09:00am - 4:00pmLocation: Cardiff

This 2 week course is designed to give the learner an introduction to the skills needed for rendering,plaster-boarding and skimming. Completion of this course will give you an Agored Cymru (OCN) Accreditation.

Plastering - 30 day course

Duration: 6 weeks Mon - Fri 09:00am - 4:00pmLocation: Cardiff

The course is City & Guilds Accredited (6217)

Course details

There are 7 mandatory Units and you must also complete any2 Units from the 8 optional units to achieve the full award.


016 - Repairing a patch in a plastered wall065 - Boarding and setting a ceiling in one coat066 - Applying a floating coat to wall and attached pier067 - Applying and finishing the setting coat to a floored wall and attached pier068 - Applying a floating coat to a square or rectangular column069 - Applying a floating finishing coat to a square or rectangular column070 - Scrim and skim finish plaster

The 8 Optional Units are:

017 - Screeding a sand and cement floor from a given level of datum point018 - Introduction to fixing floor tiles and skirting tiles071 - Applying a textured finish with border072 - Replaster over textured ceiling using bonding agent073 - Applying a plain rendering and finish with a wood float074 - Applying a Tyroean hand machine finish to a prepared wall075 - Fixing bell cast bead and applying scratch coats to wall areas076 - Applying pebble dash finish to a prepared wall

Plastering


Watch a Clip

Duration: 2 days 09:00am - 4:00pmLocation: Cardiff

Course Content

This is a certified and accredited course which will help learners reduce the risk of being affected by Hand Arm Vibration Syndrome. The course is alsodesigned to help reduce both the human and financial cost to the operator and the employer whilst also providing evidence of accredited training in accordance with health & safety legislation.

The course is City & Guilds Accredited, course number 2342 – Safe Use of Portable Power Tools. Candidates completing course are awarded an accreditation card which, like CSCS, carries candidates details and qualifications.


Course Elements

1. Health and Safety Requirements2. Risk Assessment3. Hand-Arm Vibration Syndrome (HAVS)4. Personal Protective Equipment5. Safe operation of hand operated power tools6 . Selected power tool practical assessment

The course can cover the use of up to three nominated power tools on day one (subject to the type of power tool). Where additional tools are nominated the course would be extended accordingly.

List of Tools:

Rotary drills, Diamond core percussion drills, Rotary hammer drills, Demolition hammers, Percussion drills, Cordless drill drivers, Auto feed screw drivers,Angle grinders and polishers, Abrasive cut off saws, Circular saws, Jig saws, Reciprocal saws, Slide compound/mitre saws, Power planers, Planer thicknessers, Routers and trimmers, Orbital sanders, Belt sanders, Impact wrenches, Hedge trimmers, Cut off machines, Power drills, Strimmers, Brush cutters, Hedge cutters, Generators, Blowers, Vacuum shredders, Mist blowers, Lawnmowers, Portable Compressors, Pneumatic Staplers, Pneumatic Nailers / Pinners, Pneumatic Pliers & Clippers, Pneumatic Drills, Pneumatic Hammers, Pneumatic Screw Drivers, Pneumatic Impact Wrenches, Pneumatic Sanders, Gas Nailers

Power Tools

02920 365625



?click below ct


CLICK!

5 Day


Course content

• Health & safety in relation to course tasks• Tools, methods and techniques relative to course tasks• Room assessment, measurement and setting out for tiling• Surface preparation (Wall & Floor)• Information on various tiles, adhesives & grouts• The mixing of powdered materials• The correct application of adhesive• The correct setting of tiles into adhesive• Measuring, marking and cutting tiles using various techniques• The grouting and finishing of tiled areas

10 Day

Duration: 2 Weeks Mon - Fri 09:00 am - 4:00 pmLocation: Cardiff

Course content

The course content for our 10 day course is the same as that listed for the 5 day course plus the following additional elements:

• Advanced tile cutting around obstacles• Planning and tiling with various window openings

On completion of the courses you will receive a certificate of attendance from Capital Training (SW) Ltd. You will also receive a comprehensive information pack detailing the topics covered during the course.

30 Day

Duration: 6 Weeks Mon - Fri 09:00 am - 4:00pmLocation: Cardiff

Course content

Week 1

• Overview of the tools that are used, common adhesives as well as a demonstration on how they're used and maintained

• Estimating• Health & Safety regulations outlined as industry standards

Week 2• Preparation, marking, measuring, spacing and cutting tiles for work

areas• Mixing and applying grout

Week 3• Setting up Dantum line using various methods• Preparing a wall area and marking out grout rod• Removing surplus• Highlighting potential hazards• Fixing tiles to selected wall areas• Fixing batterns to wall areas• Cutting tiles with Octagonal patterns to fully tile kitchen and

bathroom areas

Week 4 - 6• Competent learners in wall tiling will be allowed to develop their skills

in floor tiling• How to prepare floor areas for tiling• Which tolls and adhesives to use for laying a floor• Tiling, spacing and lining• Grout and measure out around pedestal• Hand cutting and sawing required tile shapes• Questions and answer session

Wall & Floor Tiling


http://www.youtube.com/watch?v=SpfzVDHmuE0&feature=player_embeddedWatch a Clip

WOMENONLY


Course details:-

• Introduction to carpentry• Introduction to tiling• Introduction to electrics• Introduction to plumbing• Introduction to floor covering

Optional courses available include:-

• Wall paper hanging• Painting and decorating• Introduction to motor mechanics• Basic I.T. (Microsoft office)• Bricklaying

This course is designed to give you the learner a wide range of hands on experience within the construction industry.

Course content will include carpentry, tiling, electrics, floor covering and plumbing, please note course content may change depending on tutors availability.

WOMEN’sDIY

(Please note optional courses offered may vary)


365625

02920 365625

Preparing to teach in the lifelong learning section

PTLLS

What do I need?

You will be provided with course content and have access to Capital Training’s facilities.


Course Details

At Capital Training (SW) Limited we offer BTEC Level 3 Preparing to Teach in the Lifelong Learning Sector. This course is the starting point for anyone involved in the delivery of adult learning. The course is part of the National Qualifications Framework and is set at Level 3 and 4.There are no specific entry requirements for this qualification. However, there is a considerable amount of written work to be completed.

This will involve reading of supplied reference books, researching specific topics, applying theory to practice scenarios and demonstrating knowledge and understanding through written work. Therefore, candidates for this course should have a good standard of written and verbal communication skills.

Course content

• This program is designed to enable delegates to adopt an integrative approach to the theory and practice of teaching and training.

• Reflect on your own current levels of experience, practice and skills.

• Build up knowledge of principles in learning, teaching, assessment and evaluation.

• Develop your communication and interpersonal skills.

• Develop an awareness of your role as a trainer and the legal requirements for carrying out that role.




?click below

ctCAPITAL TRAINING

(SW) LIMITED




?click below ct


CLICK!

Han

ds on Training

Sk ills fo r Life!

02920 365625

Health & Safety (CSCS)


If you need a CSCS card to work on site, you will need to pass a health and safety test. Capital Training (SW) Ltd is currently preparing operatives for the all important test.The Capital Training (SW) Ltd Health & Safety test sets the standard for the industry. Taken by over 500,000 people every year, it ensures that everyone working in construction has a minimum level of health and safety awareness.

The test is under continuous review to keep it in line with current legislation and ensure it meets industry requirements. The test involves answering 35 ques-tions in 40 minutes. The questions are multiple-choice, answered via a touch-screen computer. Help will be available to take you through a practice session before the test, if you wish.

Cost: £99 plus VAT (this includes the cost of the CSCS test)Location: Cardiff

The course will include:

• Underpinning knowledge and home study pack• All test arrangements made by us!• Advice and information on obtaining the full card

ctCAPITAL TRAINING

(SW) LIMITED

02920 365625

IOSH Managing SafelyDuration: 5 DaysLocation: Cardiff Who should attend?

Managing Safely is a course for managers and supervisors and is relevant to any sector and any organisation. It covers the main health and safety issues and will enable managers to effectively handle health and safety within their workplace.

Course Content

• Assessingrisks• Controllingrisks• Understandingyourresponsibilities• Identifyinghazards• Investigatingaccidentsandincidents• Measuringperformance• Protectingtheenvironment

The course culminates in a 45 minute examination, along with a practical work based project which is done at a later date.

For those students not in work, a suitable venue can be supplied by West End Training. Students who are successful are awarded an IOSH Certificate in Managing Safely which is valid for 3 years.

IOSH Working SafelyDuration: 1 DayLocation: Cardiff Who should attend?

Everyone at any level, in any sector, needing a grounding in the essentials of health and safety. The course highlights why health and safety is important, and how individuals can help protect themselves and their colleagues through a greater understanding of safety issues.

Course Content

• Introducingworkingsafely• Defininghazardandrisk• Identifyingcommonhazards• Improvingsafetyperformance• Protectingourenvironment

Assessments are built into the course so there is no need for follow –on tests on separate days.

Successful candidates who complete the written and practical assessments have a choice of either an IOSH Working Safely certificate, or an IOSH Passport card.

IOSHInstitution of Occupational Safety and Health (UK) Capital Training (SW) Ltd IOSH course in association with WETC Ltd

www.capitaltrainingsw.com ctCAPITAL TRAINING

(SW) LIMITED

02920 365625

NEBOSHNational Examination Board in Occupational Safety and Health

Duration: 11 consecutive days (10 days tuition plus 1 day for examinations)Location: Cardiff

Who should attend?

Managers, supervisors and staff from all types of organisations who need a broad understanding of health and safety issues. The certificate helps them manage risks effectively. Many people take the NEBOSH Certificate as a first step on a career in health and safety. It provides a valuable overview, and is a sound basis for further professional study.

Course content

The course covers the main legal requirements for safety in the UK, a range of workplace hazards, and methods of control. The Certificate syllabus is based on the Employment National Training Organisation (ENTO) standards. These are reviewed regularly to keep up with developments in the workplace and in legislation.

Unit 1 – Management of Health & Safety

• Health & safety foundations• Policy• Organising for Health & safety• Promoting a positive health & safety culture• Risk assessment• Principles of control• Monitoring, review and audit• Incident and accident investigation, recording and

reporting

Unit 2 – Controlling workplace hazards

• Movement of people – hazards and control• Manual and mechanical handling hazards and control• Work equipment hazards and control• Electrical hazards and control• Fire hazards and control• Chemical and biological health, hazards and control• Physical and psychological health, hazards and control• Construction activities, hazards and control

The examinations consist of two 2 hour papers , one taken in the morning and one in the afternoon. The practical test can be taken at the delegates workplace or the training venue and involves writing an assessment of the hazards noted by the student. Successful candidates will be awarded a National General Certificate on completion of the examinations and practical assessment.

The Qualification

The NEBOSH Certificate is accepted by IOSH – the Institution of Occupational Safety and Health – in meeting the academic requirements for Technician Membership of IOSH (Tech IOSH). It is also accepted by The International Institute of Risk and Safety Management (IIRSM) for associate membership.

Capital Training (SW) Ltd NEBOSH course in association with WETC Ltd


(SW) LIMITED

CLICK!General Certificate

www.capitaltrainingsw.com02920 365625 ct


SocialCare

Induction course Duration: 2 WeeksLocation: Cardiff

This course will cover statute regulations in line with the (CSIW) Care and Social Services Inspectorate Wales.

Course Content

• Vulnerable Adults• Fire Prevention in the Care Home• First Aid• Health and Safety in Health and Social Care• All Wales Manual Handling Safety Passport• Food and Hygiene• Deprivation of Liberty• Infection Control• Understanding Epilepsy• Medication Awareness• Care Values and Principles• Option Day – Choice of one of the following:

Positive Approach to Challenging Behaviour, Child Protection, Dementia, Understanding Autism, Learning

Capital Training (SW) Ltd Social course in association with WETC Ltd

Other Courses that we offer

• Abuse Of Adults With Learning Disabilities• All Wales Manual Handling Passport Scheme A –F• Autism Awareness• Dementia Awareness• Deprivation Of Liberty Safeguards Awareness Training

(Dols)• Effective Communication In Care• Emergency First Aid• Epilepsy Awareness• Fire Safety Awareness In The Care Home• Infection Control• Managing Challenging Behaviour• Medication In The Care Home• Midas Minibus Driver Awareness Scheme• Paediatric First Aid• Palliative Care Awareness• Principles Of Care• Principles Of Person Centered Care• Protection Of Children (Poca) – Level 1• Protection Of Children (Poca) – Level 2• Protection Of Children (Poca) – Level 3• Protection Of Vulnerable Adults (Pova) – Level 2• Recognising Indicators Of Child Abuse• Role Of The Care Worker• Understanding Child Protection• Violence And Aggression

02920 365625


(SW) LIMITED

Certificate inEnvironmentalManagement

NEBOSH

Duration: 5 DaysLocation: Cardiff

The NEBOSH National General Certificate qualification has been recognised for many years as an excellent introduction to the fundamentals of occupational health and safety. The NEBOSH National Certificate in Environmental Management is designed to provide a similarly sound foundation in environmental management.

Who should attend?

Managers, supervisors and employees based in the UK, who have responsibility for managing environment issues, as part of their day to day duties. The qualification focuses on UK law and environmental management systems. It also provides a sound basis for progression on to the NEBOSH National Diploma in Environmental management.

The NEBOSH National Certificate in Environmental Management, will benefit companies who are seeking to implement effective environmental management systems, ensuring that line managers have a sound understanding of the principles of managing environmental risk. This qualification is relevant to all industry sectors.

What does the course cover?

It covers the practical issues of managing environmental risk. The syllabus takes a risk management approach based on the best practice and international industry standards, including:

• Environmental Management Systems and Impact Assessments

• Sources and use of energy and energy efficiency• Control of pollution• Planning for and dealing with environmental

emergencies

Assessment

Students are assessed by a written examination and a practical Environmental Review of the student’s own workplace.

Capital Training (SW) Ltd NEBOSH course in association with WETC Ltd

capital training adult course prospectus

Documents

day course

training potential

course detailsday

package course

training centre

capital training hope

capital training weve

great training experience