capp q paper.pdf
TRANSCRIPT
oot--Q.,Fr
O
BACHELOR OF TECHNOLOGY INMECHANICAL ENGINEERING (COMPUTER
INTEGRATED MANUFACTURING)
Term-End Examination
june, 2409
BME-011 : COMPUTER AIDED PROCESSPLANNING
Time : 3 hours Maxhnum Marks : 70
Note : Attempt any fioe questions. Ary dsta not supplied canbe assumed suitablv.
(u) Make a block diagram of mater ial
, requirement planning system. Describe the
role of computer in production planning
with the help of above diagram
(b) Briefly discuss the various approaches
avai lable f or computer aided process
planning.
(u) Describe the generative system of CAPP.How expert system or knowledge basedsystem is used to enhance the capability ofthis system ?
1 .
2.
BME-0L1 P.T.O.
3 .
(b) A forming tool machining at 40 m/ ninute
requires re-sharpening after 40 minutes.
What should be the cutting speed for
prolonging tool life to 80 minutes ? Assume
n : 0 .L5.
(u) With the help of a suitable block diagram
describe the data base system for
machinability and part print analysis.
(b) Explain the principles to be used for
selecting. cutting tools in the case of CNCturning centre.
(u) What is a pocket with respect to process
planning ? Explain the simple method that
can be used for pocket identification.c t {
(b) List the factors which dictate the optimum
sequence for a machining operation.
(a) What do you understand from the process
capabili$ of a manufacturing process ? Listdifferent parameters to determine theprocess capability.
4 .
J .
2BME-011.
(b) Assembly of a number of parts into
final product is shown in the figure 1,,
parts L, 2, 3, 4 and 5 have dimensions
A13, BlB, c1:, D* j and ElE. (A, B, c,
D and E are nominal dimension) Compute
the tolerance on the Dimension'F'.
l+Eted
Figure 1
(u) Describe computer aided process planning
with the help of suitable block diagram.
Name at least eight packages of CAPP
available so far.
(b) List at least six criteria for selecting a CAPP
system for casting processes.
6 .
F-B t b +;<-q -r c-+l+-D I d+l
l<-Aia --+l
BME-011 P.T.O.
7. (u) Briefly describe four different aspects ofmachine tool selection in machiningprocesses.
(b) Discuss the report generation module of theCAPP system. Briefly describe at least threeformat of the process plan under reportgeneration module.
- o O o -
BME-01L