CAR ALARM

KEETEC TS 100CAR ALARM

KEETEC TS 10

Car alarm with two remotes with hopping code and built-in ultrasonic sensor with adjustable sensitivity. Its designed for vehicles with 12V supply voltage and it protects doors, trunk and bonnet. The car alarm system can be controlled by its remotes or by the factory remotes (using external CAN BUS module EASY CAN). PC Setup program for easy configuration. The system comes with 4 various sets of remotes.

Car alarm with two remotes with hopping code and dual-zone shock sensor. Its designed for vehicles with 12V supply voltage and it protects doors, trunk and bonnet. The car alarm is equipped with functions as re-arming, vehicle searching, lock reminder, silent activation and many others. 4 various sets of remote controls.

MAIN FEATURES:MAIN FEATURES:

CAR ALARM WITH 2 REMOTES WITH HOPPING CODEBUILT-IN IMMOBILIZATION CIRCUIT (NO/NC)MONITORING DOORS, TRUNK AND HOODBUILT-IN ULTRASONIC SENSOR WITH ADJUSTABLE SENSITIVITYWARNING FUNCTION AT 433MHZ INTERFERENCECAN BUS CONNECTION (OPTIONAL)CONFIGURATION VIA PC (PC SETUP)EMERGENCY PIN CODE DEACTIVATION ALARM HISTORYLED VALET SWITCH

CAR ALARM WITH 2 REMOTES WITH HOPPING CODEDUAL-ZONE SHOCK SENSORDOUBLE LOCK/UNLOCK PULSESEQUENTIAL TURN SIGNALS OUTPUT IMMOBILIZER OUTPUT (-300MA)CENTRAL LOCKING OUTPUTS (-300MA)EMERGENCY PIN CODE DEACTIVATION

car alarms&immobilizers

www.keetec.eu

TSS GroupTř. Tomáše Bati 145763 02 Zlín - LoukyCzech Republic

tel.: +420 577 019 603e-mail: export@tssgroup.czhttp://en.tssgroup.cz

CAN BUS CAR ALARM

KEETEC TS CANCONTACTLESS IMMOBILIZER

KEETEC TS IMOGSM CAR ALARM

KEETEC TS GSM

CAN BUS car alarm with built-in immobilizer circuit controlled by factory remotes. TS CAN system can be installed as analogue system or using CAN BUS or combination of both. PC Setup program for configuration of all settings, functions, view of alarm history and for online diagnostic of inputs and much more. The car security is increased with additional RF SMART module.

Anti-theft system with wireless transmitters, RFID card and two built-in immobilizer circuits. The system is always active (engine immobilization), if the transmitter is out of the range or E-card is not scanned or combination of both. The remotes are equipped with motion sensor to increase the battery lifetime. PC Setup program for easy configuration.

CAN BUS car alarm with built-in GSM/GPS module, immobilizer, RF interface, accelerometer. The system sends SMS with GPS location or it makes a call on authorized phones, when alarm is triggered. Alarm can be controlled by factory remotes or additional remotes. Firmware and database of supported vehicles are monthly updated. The RF SMART functionality can increase the car security.

MAIN FEATURES: MAIN FEATURES: MAIN FEATURES:CAN BUS OR ANALOGUE SYSTEMBUILT-IN IMMOBILIZATION CIRCUIT (NO/NC)TWO INPUTS FOR ADDITIONAL SENSORSSEQUENTIAL OUTPUT FOR DIRECTIONAL LIGHTSALARM HISTORYCONFIGURATION VIA PCMONTHLY FIRMWARE UPDATESEMERGENCY DEACTIVATION BY PINRF SMART MODULE (OPTIONAL)SIREN 20W

HIGH-SECURITY IMMOBILIZER2 BUILT-IN IMMOBILIZATION CIRCUITS (NO/NC)3 MODES OF IMMOBILIZER DEACTIVATION2 WIRELESS TRANSMITTERS WITH RANGE UP TO 5 METERSLONG REMOTE´S BATTERY LIFE (SLEEP MODE)IDENTIFICATION E-CARD (RFID)CONFIGURATION VIA PC (PC SETUP)EMERGENCY PIN CODE DEACTIVATION ALARM OUTPUT (SIREN OR GSM PAGER)VALET MODE

GSM/GPS CAR ALARM WITH GPRS CAN BUS WITH ANALOGUE SUPPORTBUILT-IN IMMOBILIZATION CIRCUIT (NO/NC)BUILT-IN ACCELEROMETERBUILT-IN RF INTERFACECONFIGURATION VIA PCPOWER ANALOG OR SEQUENTIAL OUTPUT FOR DIRECTIONAL LIGHTSALARM HISTORYMONTHLY FIRMWARE UPDATESSMS NOTIFICATION, VOICE CALLING

module RF SMART (optional)

RC SMART (optional)