car cooling system
TRANSCRIPT
![Page 1: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/1.jpg)
1
Cooling Systems Theory and operation Components
Thermostat Hoses Radiator Radiator cap Coolant recovery Fans Water pumps
Anti-freeze
![Page 2: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/2.jpg)
2
Theory and Operation
The cooling system removes excess heat to keep the inside of the engine at an efficient temperature, about 200o F (94o C).
Animation: Cooling System
![Page 3: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/3.jpg)
3
Coolant Flow
Coolant flows through the water jackets where it absorbs heat. It then flows through the radiator where heat is transferred to the air passing through. The amount of flow is determined by the water pump. The flow direction is controlled by the thermostat.
![Page 4: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/4.jpg)
4
Cold Engine
When an engine is cold, the thermostat is cold. Coolant flow is through the bypass hose and the water jackets. This allows the engine to warm up evenly.
![Page 5: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/5.jpg)
5
Warm Engine
The thermostat opens when the engine warms up. This allows coolant to circulate through the radiator and the water jackets.
![Page 6: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/6.jpg)
6
Theory and Operation Maintains operating temperature
of approx. 200-235 degrees When temperature is low, bypass
blocks coolant flow through radiator
When correct temperature is reached, thermostat opens and excess heat is absorbed through water jackets and passed on to air flowing through radiator
![Page 7: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/7.jpg)
7
Problem: A cylinder head has been removed
from an engine Two exhaust valves are badly burned The head is warped Coolant is in combustion chambers
What caused this problem? What should be done to repair
this?
![Page 8: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/8.jpg)
8
Thermostat
The spring in this thermostat has closed the valve. When it gets hot, the heat motor will push the valve open.
Animation: Thermostat Operation
![Page 9: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/9.jpg)
9
Thermostat Operation Where is it located? How does it control the engine’s
temperature? Can it be installed incorrectly? How often should it be replaced?
![Page 10: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/10.jpg)
10
Thermostats
![Page 11: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/11.jpg)
11
What if… What is likely to happen if the
thermostat were removed from a vehicle?
![Page 12: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/12.jpg)
12
Hoses
Reinforced rubber hoses transfer the coolant from the engine to the radiator, coolant reservoir, and heater core.
![Page 13: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/13.jpg)
13
Hoses and Clamps
![Page 14: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/14.jpg)
14
Hoses Why are hoses necessary? How often should they be
replaced? Why do some hoses have internal
springs and what would happen if they were removed?
Why are hose clamps so critical to the overall operation of the cooling system?
![Page 15: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/15.jpg)
15
Radiator
The hot coolant flows through the radiator tubes and heat is transferred to the fins and then to the air passing through radiator.
![Page 16: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/16.jpg)
16
Radiator Types
Older vehicles used downflow radiators with the coolant flowing from the top to the bottom. Modern vehicles use crossflow radiators with the coolant flowing from one side to the other.
![Page 17: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/17.jpg)
17
Radiator Composition Soldered copper or brass
Repairable Aluminum cores with plastic tanks
Lighter weight Corrosion resistant More inexpensive Better heat transfer
![Page 18: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/18.jpg)
18
Problem: A plastic/aluminum radiator is
leaking at it’s seam How can it be repaired?
What is the main advantage of a crossflow radiator over a downflow radiator?
![Page 19: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/19.jpg)
19
Radiator Cap
The upper gasket prevents coolant from escaping to the outside. The lower gasket keeps a pressure in the radiator. The cam lock pushes the two gaskets against the sealing surfaces when the cap is installed. The safety stop prevents the cap from being opened too quickly.
Animation: Pressure Cap
![Page 20: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/20.jpg)
20
Radiator Pressure
Radiator pressure results from the expansion of the coolant as the engine warms up.
The radiator cap creates the pressure by holding the coolant in the radiator.
Coolant volume increases about 10% as the temperature increases from 70 to 180o F (21 to 82o C).
The coolant’s boiling point increases about 3o F for each psi increase in pressure.
![Page 21: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/21.jpg)
21
Coolant Recovery Reservoir
When the engine warms up, the radiator cap allows the expanding coolant to flow into the coolant recovery reservoir.When the engine and coolant cool down, the coolant returns to the radiator and water jackets through the vacuum valve in the cap.
![Page 22: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/22.jpg)
22
What will happen if: A customer’s vehicle has a very
slight leak at the thermostat housing?
What symptoms would the customer most likely notice?
![Page 23: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/23.jpg)
23
Radiator Cap Types
These caps are the same except for the vacuum valve. This valve opens to allow coolant to return from the CRR. The gravity vacuum valve opens much easier.
![Page 24: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/24.jpg)
24
Problem: If a customer’s pressure cap is
defective, what is the most likely symptom the customer would notice?
How often should a pressure cap be replaced?
![Page 25: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/25.jpg)
25
What will happen if: At normal operating temperature,
you remove the radiator pressure cap to check coolant level?
How can the coolant level be checked safely?
![Page 26: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/26.jpg)
26
Checking coolant level
![Page 27: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/27.jpg)
27
Radiator Air Flow
Air flows through the openings at the front of the vehicle, through the radiator and other heat exchangers, and exits past the engine. The fan with shroud assists the natural flow when the vehicle goes slow or is stopped.
![Page 28: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/28.jpg)
28
Fan and Fan Drive
Most rear wheel drive vehicles use a mechanically driven fan that is mounted onto the water pump.
Some vehicles use a hydraulic cooling fan
![Page 29: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/29.jpg)
29
Fan Clutch
The fan clutch allows the use of a large fan that can be driven at slower speeds. A thermal fan clutch senses temperature and will drive the fan only when it becomes necessary.
![Page 30: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/30.jpg)
30
Electric Fans
Most front wheel drive vehicles use fan that is driven by an electric motor. This fan assembly includes the motor, fan, and shroud.
Some vehicles use two fans and some of these have two speeds.
![Page 31: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/31.jpg)
31
Electric Fans Electric fans can be mounted in
front of or behind the radiator or combined
Electric fans are controlled by relays that are energized by a vehicle’s PCM
![Page 32: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/32.jpg)
32
Problem: How can an electric fan circuit be
tested?
![Page 33: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/33.jpg)
33
Fans Why would a hydraulic cooling fan
be advantageous over a traditional fan clutch?
Why is fan operation so closely controlled on a vehicle?
How can a fan clutch be tested?
![Page 34: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/34.jpg)
34
Drive Belt
The water pump and fan are driven by a flexible accessory drive belt that is driven by the crankshaft pulley.
![Page 35: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/35.jpg)
35
Water Pump Water pumps are centrifugal
pumps Some pumps are driven by
accessory drive belts Some pumps are driven by engine
timing belts Some pumps are driven by the
engine timing chain
![Page 36: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/36.jpg)
36
Water Pumps Weep holes:
Holes placed in bearing housing to keep coolant from infiltrating bearing
Weep hole allows any anti-freeze that passes by seal to exit bearing housing
If seal deteriorates, coolant will leak out of weep hole
![Page 37: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/37.jpg)
37
Water Pumps How often should a weep hole be
inspected for leakage? How can leakage be detected? What would happen if the leak was
ignored and vehicle continued to operate?
Why is water pump replacement wise on an application where the pump is driven by the timing belt?
![Page 38: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/38.jpg)
38
Coolant and Antifreeze
Coolant is a mixture of antifreeze and water. Antifreeze lowers the freezing point and raises the boiling point.Coolant also protects the system from rust and corrosion.
![Page 39: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/39.jpg)
39
Anti-freeze Coolant life is determined by the
life of the corrosion protection package
Older conventional coolants (IAT’s) should be changed every two years
Newer extended life coolants (OAT/ HOAT’s) should be changed every five years
![Page 40: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/40.jpg)
40
Anti-freeze IAT: inorganic additive technology OAT: organic acid technology HOAT: hybrid organic acid
technology Extended and conventional anti-
freezes cannot be mixed EG: ethylene glycol PG: propylene glycol
![Page 41: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/41.jpg)
41
Anti-freeze All anti-freezes contain:
Corrosion inhibitors: silicates, phosphates, borates
pH buffers: maintain acid-alkaline balance, prevent electrolytic corrosion
EG or PG base: to reduce freezing point and increase boiling point
Dye: to distinguish anti-freeze and type
![Page 42: Car cooling system](https://reader031.vdocument.in/reader031/viewer/2022020207/551e37d8497959d4398b4721/html5/thumbnails/42.jpg)
42
Anti-freeze Maximum concentration: 67% anti-
freeze Minimum concentration: 50% for
corrosion prevention Pure anti-freeze has higher
viscosity and does not flow well Does not transfer heat well