card gateway guide · payment gateways payguard® can connect to the following uk card payment...
TRANSCRIPT
June 2020 - Version 200602AN
Card Gateway Guide
Page 2 l Contents
Contents
Section 1 - Page 3: Gateways - An overview of the UK Card Gateways PayGuard® can integrate with.
Section 2 - Page 5: PayGuard® - A guide for setting up PayGuard’s® own Gateway.
Section 3 - Page 7: Stripe - A guide for integrating PayGuard® with Stripe.
Section 4 - Page 9: Worldpay - A guide for integrating PayGuard® with Worldpay.
Section 5 - Page 13: SagePay - A guide for integrating PayGuard® with SagePay.
If your Gateway is not listed above, please contact us for instructions.
www.payguard.co | 03333 660 560
GatewaysWhich Gateways can PayGuard® work with?
Payment Gateways
PayGuard® can connect to the following UK card payment gateways, so you don’t need to change who you currently work with and your reconciliation stays the same.
Option 2: Integrate your Existing Payment Service Provider
Acapture
Adyen
Authorize.net
Barclaycard Smartpay
Barclays ePDQ Extra Plus
BlueSnap
Borgun
Braintree
Cardstream
CenPOS
Checkout V2
Checkout.com
Clearhau
Credorax
CyberSource
DIBS
DataCash
Elavon
Ezic
Global Iris
Global Connect
IXOPAY
Ingenico Payments
Optimal Payments
Payacard
PayPal
PayVector
Payment Express
Paymill
QuickPay
QuickPay V10
Realex
SafeCharge
SagePay
SecurionPay
Stripe
TNS
Wirecard
WorldPay
eWAY Rapid
iATS Payments
iVeri
Option 1: Use PayGuard® as your Payment Service Provider (Payment Gateway).
www.payguard.co | 03333 660 560Page 4 l Section 1: Gateways
PayGuard® GatewayUse PayGuard® as your card payment gateway.
Overview
www.payguard.co | 03333 660 560Page 6 l Section 2: PayGuard® Gateway
StripeIntegrate your existing Stripe account with PayGuard®
Overview
www.payguard.co | 03333 660 560Page 8 l Section 3: Stripe
WorldPayIntegrate your existing WorldPay account with PayGuard®
Overview
PayGuard® can integrate with your existing WorldPay account so that payments are processed through WorldPay as they are today . Payment information is collected by PayGuard®, tokenized, and then sent to WorldPay for immediate processing.
In order to successfully integrate, PayGuard® requires certain information from WorldPay about your account, and your WorldPay account will need to have an XML Installation with two settings added/changed.
In a nutshell, for us to integrate your WorldPay account with your PayGuard® account we need you to:
PayGuard’s® Integration with WorldPay
Once done, PayGuard® can complete the integration and you can start using PayGuard® to process payments using your WorldPay g ateway.
www.payguard.co | 03333 660 560Page 10 l Section 4: WorldPay
Request an ‘XML Installation’ on your existing WorldPay account
Get approval for an ‘XML Invisible Installation’
Turn off the ‘Capture Delay Setting’
Provide the XML Username and Password to PayGuard®
Step 1
Email WorldPay on [email protected] requesting they add an ‘XML Installation’ to your account . You will need to provide them with your ADMIN code, or Administration Code, which should be 12 letters in block capitals. Use the text below i f helpful:
Step 1: XML Installation
www.payguard.co | 03333 660 560
“Good afternoon, we would like to add an XML installation to our account. Our ADMIN code is XXXXXXXXXXXX. Please approve us for an ‘XML Invisible Installation’.”
You may get this message from Worldpay: “In order to set up an XML installation on your account we need to be sure your payment processing environment is PCI compliant. If your shopping cart is in the approved list then you can simply reply to this email with your proof of purchase (i.e. invoice) attached.”
PCI Compliant / Shopping Cart Message
Fusion Telecom work with Spreedly to tokenise credit and debit card information as well as process payments. Spreedly is on WorldPay’s approved ‘Shopping cart’ list. Therefore, your reply would be:
“We have a contract with Fusion Telecom to supply us with their product called PayGuard®. PayGuard® captures card, and other transaction information, which PayGuard® then passes to Spreedly for processing. Fusion Telecom is a PCI level 1 Service Provider.”
Note: You may be asked to provide evidence of relationships, as well as Fusion Telecom’s PCI compliance. Three documents suffice: (1) Your contract with Fusion Telecom Ltd, (2) Fusion Telecom’s PCI Compliance AOC, and (3) an Invoice from Spreedly to Fusion Te lecom. You have of course the contract between us. If the other documents are required, please request them from us.
Page 11 l Section 4: WorldPay
Further Steps
www.payguard.co | 03333 660 560
You will need to ensure the following settings are complete:
Step 2: Settings
Turn off the ‘Capture Delay Setting’ (you can do this in your WorldPay portal
You need to be approved by WorldPay for an ‘XML invisible Installation’
Please provide us with the following information you can obtain from WorldPay:
Step 3: Provide Us With …
ADMIN code / Administration Code (usually 12 block capital letters.)
XML Username / Merchant Code (usually identical to ADMIN code above with an ‘M’ and number appended. NOT the Merchant ID.)
XML Password (usually 8 alphanumeric characters.)
Page 12 l Section 4: WorldPay
SagePayIntegrate your existing SagePay account with PayGuard®
Overview
www.payguard.co | 03333 660 560Page 14 l Section 5: SagePay
Thank you for your attention
Thank you for considering PayGuard® as your chosen payments partner. If you need further information in order to take this pr oject to the next stage, or have any other questions, please do not hesitate to contact us.
We look forward to working with you and creating a Partnership that will benefit us both for years to come.
Contact
03333 660 560
www.payguard.co | 03333 660 560
Page 16 l Thank you