career development course catalog w / s 2017 j -...

GARY WORKS –Location 1221 E Ridge Road, Gary

USW - 1066 Union Hall

Debbie 219-884-7930

Renee 219-884-8368

CAREER DEVELOPMENT COURSE CATALOG

W INTER / SPRING 2017

JANUARY - JUNE

MIDWEST—Location 1919 Willowcreek, Portage

USW– 6103 Union Hall

Tracy 219-762-1010

Laura 219-762-1044

Locals: # 1014

# 1066

# 2695

# 5133

# 6103

You are Never to Old to LEARN….

So start by signing up TODAY!!!

2

CUSTOMIZED COURSE GUIDELINES

Classes are open to active Union Steelworkers

Classes will be taken on the employee’s own time

Classes can only be taken once

Classes where spouses may attend (with employee) are noted

If you have to drop, you MUST contact Career Development or you will get

charged the class amount against your yearly limit.

* * * * * * Customized Class Limits * * * * * *

Effective January 1, 2003, The Governing Board for ICD has put a limit on customized classes of $2,000 per participant per year. What this means to the participant is in most cases, each participant will be able to take approximately 5 courses per year. On an average, most classes cost $400 per person and basic computer classes run $275 and some courses cost more or less than others so each participant’s spending will be monitored. Also, there is a limit of 2 Limited Customized courses per year.

In addition to customized classes USW members are eligible for Tuition Assistance.

You may use up to a maximum of $1,800/calendar year (Jan. to Dec.) for an

accredited school.

Funds may be used for tuition, required textbooks and course-related fees. Funds

cannot be used to pay for materials, equipment, or supplies.

Approved Correspondence Courses may be reimbursed (upon proof of successful

completion) for 50% of the tuition costs of up to a maximum of $900 per calendar year (applied against the $1,800 limit).

You must receive a passing grade for all courses taken. Tuition funds cannot be

used to pay for courses you fail or drop/withdraw. IF this happens, an appeal form must be filed and you must pay up front for your next classes. You must submit a copy of your grades/certificate of completion to Career Development upon completion of the course, to be eligible for further Tuition Assistance Funds on a case-by-case basis.

Please Remember. . .Career Development is COMPLETELY Confidential!

TUITION ASSISTANCE

3

USS Site Info & Locations

Midwest Career Development

Gary Works Career Development

Please Note: ALL Employees Gary Works and Midwest class offerings are combined.

You may take any class listed in this book.

To register, please contact the office at the mill where you work, NOT the class location.

Offices are located at: 1221 E Ridge Road, Gary, IN—1066 Union Hall

Computer Classes are at: McBride Hall - 1014 Union 1301 Texas Street, Gary

Program Coordinator: Debbie Rodriguez 219-884-7930 [email protected]

Program Assistant: Renee Aker 219-884-8368 [email protected]

1919 Willowcreek Road, Portage, IN (Local 6103 Union Hall)

Program Coordinator: Tracy Clark 219-762-1010 [email protected]

Program Assistant: Laura Mayer 219-762-1044 [email protected]

4

Career Development

Local Joint Committee Members

USS Gary Works LJC Committee Phone Number

Charva Jones, District 7, Sub District 5 Director 219-881-6211 Craig McClory, Director – Productivity Improvement 219-888-5301 and Workforce Planning Rodney Lewis, President LU 1014 219-885-1014 X-101 Robert Vasquez Member LU 1014 219-888-1513 Mark Sakon, Training Coordinator LU 1014 219-882-1391 William McCall, President LU 1066 219-887-0594 Ruth Bussey, Committee Member LU 1066 219-741-7492 Frank Pokrywczynski, Training Coordinator LU 1066 219-306-6882 Rich Tarin, President LU 2695 219-781-2264 Shelly Shahbaz, Committee Member LU 2695 219-888-3015 Ron St. Myers, Committee Member LU 2695 219-888-3470 Jason Hughes, President LU 5133 219-545-8386 Pete Smith, Committee Member LU 5133 219-888-6881

USS Midwest LJC Committee Phone Number Mike Young, President LU 6103 219-771-4758 Tom Potter, Vice President LU 6103 219-508-7001 Mike Farver, Training Coordinator LU 6103 219-763-5639 Charva Jones, District 7 Sub District 5 Director 219-881-6211 Craig McClory, Director – Productivity Improvement 219-888-5301 and Workforce Planning

5

Ta b l e o f C o n t e n t s CLASS NAME PAGE

2016 Naional Electrical Code 37

Access-Level 1 11

All About Smokers 39

Amazon Alexa- New Class 10 & 16

Amazon Fire Stick with Kodi 18 & 23

Amazon Fire Sticks-New Class 11 & 13

Android TV Box with Kodi-New Class 19 & 24

Appliance Troubleshooting 41

Apply Charts 27

Arts and Craft Workshop 36

Auto Heating and Cooling 37

Basic Motorcycle Maintenance & Repair 32

Build a Game Table 39

Build your own Barbeque or Cooler Cart 33

Cake and Cupcake Decorating 39

Cell Phone Repair Technician 25

Cement Jewelry 38

Civil Procedure 28

Cloud Storage 14

COMM 104 Workplace Communication 33

Contracts 28

Cooking 101 51

Cooking The Dutch Oven Way 33

Create Your Own Photo Book 15

Create your Own Will 10

Crowdfunding Basics 45

Cut the Cable-Free TV 11

Desktop PC Laptop Upgrade and Repair 20 & 25

Detecting Trends 27

Digital Camera: A Five Week Class 30

Driveco-CDL 34

Drywall 42

EBAY-Buying and Selling 12

Electrical 42

Electronic Workshop 40

Federal Tax Returns Using Turbo Tax 26

Fitness for Life 29


Fitness Thru Self Defense 36

Fitness Trackers and Comparisons 20 & 25

Fitness Trackers and On-Line Healthy Help 13

Framing/ Siding 42

Get Healthy On-Line with Fitness Trackers & More 12

Getting Movies From Here To There 15

Glass Etching 37

Grant Workshop 46

Heating and Air 51

Home & Business Security Camera Surveillance Systems 22 & 26

Home Entertainment Technology 16

HVAC 100 Technology 50

Industrial Math Tune-Up 31

Insulation 42

Introduction into Web Design and Development 31

IPAD-Using It More Than You Are Now 17

iPhone and iPad Tips and Tricks 20 & 24

ITUNES-Finally Understanding It 17

Jewelry Making 43

Lawn Equipment Maint. And Repair 45

Learn to Play the Piano/Keyboard-Level 1-4 35

Linux- Ubuntu Operating System 21

Microsoft Excel- Introduction 21 & 25

Money for College 31 & 46

Mosaic Garden Bench/Open Lab 32

Network+Certification 14

Non-Profits:How to Form One 31

Open Lab - Every Tuesday 13

Personal Success Pathways 46

Personalized Wood Signs and Decor 40

Photo II: a Five Week Class 30

Photshop Elements 17

Pilot / Ground School Classes 49

Planning for Retirement? 34


Politics and Wall Street 27

PowerPoint MOS Certification 11

Print Reading 50

Programmable Logic Controllers 48

Property 1 28

Quicken 15

Raspberry Pi (Part 2) -Customizing and Enhancing KODI 23

Raspberry Pi- A Computer for You-New Class 12 & 14

Residential Electrical Wiring 30

Retire Ready 44

RetroPie for Raspberry Pi- New Class 19

Rising Interest Rates 27

Sametime-Navigating the Employee Portal 34

Scuba Classes 52

Social Security 44

Solutions at Work 29

Stained Glass Classes 41

Stained Glass Lamp 32

Sublimation-Custom Items 9

Succulent Plants 51

Technical Lab 9

Thermoplastic Welding 32

Travel: Choose Your Own Adventure 29

Tutoring 36

Understanding Investment Risk 34

Raspberry Pi3 model B Computer Rasbian and KODI 18 & 23

Upgrade That PC 16

Upgrade to Windows 10 21& 24

Virus Protection Seminar 14

Vinyl Cutting Workshop 40

Where is your money taking you? 41

Wills and Trusts 28

Windows 10 10

Wirless Alarm Security Systems for Home and Business 22 & 26

Word MOS Certification 9

Wordpress-Design a Web-Site 13

Yoga 47

8

Tino Fulimeni Scholarship Fund

In 2016, ICD will award seven $1000 scholarships to various children and grandchildren of steelworkers.

The Tino Fulimeni Scholarship Fund was established to honor the memory of Brother Fulimeni. Tino was a fanatic about ICD. His commitment and contribu-tion are evident in the success of the Career Development Program. The Fund is administered by ICD in Merrillville, IN. The following criteria must be met to be eligible for the scholarship drawing:

Applicant must be a high school graduate enrolled in college and begin-ning in the fall semester of 2017 or the spring semester of 2018 or a col-lege student returning to school in the fall semester of 2017 or spring se-mester of 2018.

Applicant must have maintained, in the past, at least a cumulative 3.0 grade point average and can demonstrate this with a transcript if selected.

Applicant must be the child/grandchild of a steelworker who is currently eli-gible to participate in the Career Development Program.

Drawing will take place November2017.

ICD will accept applications in their office until the application deadline of August 31, 2017

You can apply on-line at www.icdlearning.org Applications can be obtained from your local program

or by calling ICD at (219) 738-9029.

9

Computer Classes HELD at MIDWEST Computer Lab 1919 Willowcreek, Portage

Spouses can attend with employee at no charge Class Times Noon-2:30pm OR 4-6:30pm (if 12+ student we will add 8am class)

TECHNICAL LAB – EVERY WEDNESDAY – Every Month Dates: Jan 11 – June 28 (10:00am – 6:00pm) Trainers: Sam Laker

Every Wednesday between the hours of 10am and 6pm we have a technician waiting for you to bring in your very slow, broken, needing upgrading PCs! We can help with: Fixing Slow or Broken Machines, Upgrading software /Transfer data, making sure your PC is Protected, and Upgrading Computers. Just stop by or call and make an appointment. This is an incredible opportunity, don’t miss it! Keep in mind if you need any hardware or non-free software you will need to purchase it. Sam will assist in getting you the necessary software and hardware.

WORD MOS Certification Dates: Jan 17 – Feb 28, Tuesdays for 7 weeks Trainers: Computer Education Institute You will learn everything in our Word 1 and Word 2 classes including Formatting, Columns, Tables, etc. At the end of this class you will be ready to take the WORD 2010 MOS certification exam.

SUBLIMATION- Custom Items Dates: Jan 23 – Jan 30 Mondays for 2 weeks

OR June 20 – June 27 Tuesdays for 2 weeks Trainers: Computer Education Institute Come let your creative side come out. Sublimation printing is the process of placing pictures and sayings on Tin Boxes, Wooden Boxes, Key Chains, Coasters, etc. Come to either of these classes, pick your picture, pick your saying, pick your items of choice and make wonderful customized beautiful items! These make great presents and keepsakes!

10



WINDOWS 10

Dates: February 6 – March 6, Mondays for 5 weeks Trainers: Computer Education Institute

They did it again, A new version of Windows and boy is it different from 7. This class will teach you what you need to do if you want to upgrade, what are the differences between Window 7,8 and 10, and then finally how to use the new Windows and get the most out of it. Learn about Tiles, Apps, The new Control Panel, The new Desktop, START button, File Explorer, History, Making and creating folders and tile groups, Login screen, Customizing 10 to fit your needs, creating a Microsoft Account, the user Portal and much much more.

CREATE your OWN WILL Dates: March 7, Tuesday OR Dates: May 9, Tuesday Trainers: Computer Education Institute Do you have a will? Have you been putting it off because you don’t want to hire an attorney and you really don’t want to think about it. Well, now is the time because it is so easy. Come to this class and learn the different packages available to use and begin creating yours today! Don't let the court decide the outcome of your estate! Don't delay the distribution of your assets to your loved ones! Take just a few minutes to write your Last Will and Testament today (CEI is not offering any legal advice in this class, we are showing you how to use pre-designed software to create a will)

AMAZON ALEXA – New Class!!!! Dates: March 13, Monday Trainers: Computer Education Institute

You may have heard about Amazon Echo, well this is her “Little Sister”. Come learn how the dot Plays music, controls smart home devices, provides info, sets alarms, and more. Voice Controlled · Alexa Enabled As part of this class you will receive an Echo Dot to use and keep at the end of the class. Come see what everyone is talking about.

11



POWERPOINT MOS Certification Dates: March 21 – May 2 (Tuesdays for 7 weeks) Trainers: Computer Education Institute

Create dazzling presentations! This class begins with the basics of PowerPoint from using the auto-content wizard, adding new slides, using the slide layouts and using the different views. Learn how to give your presentation dimension by adding shapes with text from the drawing toolbar, adding clipart & pictures and adding a design template to bring it all together. Work with Graphs and Organizational charts. Add transitions and sounds then learn how to save time by making global changes to your presentation using the slide master. By the end of this class, you will be ready to take the MOS certification exam.

AMAZON FIRE STICKS – New Class!!!! Dates: April 3 – April 17 Mondays for 3 weeks Trainers: Computer Education Institute

With a huge selection of movies and TV episodes, voice search that actually works, and exclusive features like ASAP and Prime Music, Fire TV Stick is an easy way to enjoy Netflix, Amazon Video, Hulu, HBO NOW, low-cost movie rentals, live and on-demand sports, music, photos, games, and more. As part of this class you will receive a Fire stick to use and keep at the end of the class. Come see what everyone is talking about.

CUT THE CABLE – FREE TV

Dates: April 24 – May 8, Mondays for 3 weeks Trainers: Computer Education Institute

Do you wish you could ditch your expensive cable or satellite TV services? This class will discuss the state of Internet Streaming video, including smart TVs, set top boxes and free or premium video services to obtain the kinds of content you currently enjoy with your cable TV subscription. Some options maybe NetFlix, Google, Amazon, YouTube, etc…

ACCESS – LEVEL 1 Dates: May 16 – June 13, Tuesdays for 5 weeks

A database is a collection of data arranged for easy search and retrieval. Access 1 covers the basic terminology used with databases. You will learn how to create and modify a table, adding, editing, finding and deleting records. Learn how to create a select query and perform calculations. Creating forms using the Form Wizard and reports using the Report Wizard are also introduced in this class.

12



Get HEALTHY ON-LINE with Fitness Trackers & More - Updated Class

Dates: May 15 – May 29, Mondays for 3 weeks Trainers: Computer Education Institute So, you REALLY want to get healthy in 2017. This class will help you begin. We will show you some of the best web-sites for exercises, motivation, healthy menus, keeping track of daily food intake and much much more. Make yourself a priority today! We will also talk about the different types of Fit-ness Trackers, showing you the pro’s and con’s of several different models. As part of this class you will receive a FitBit to use and keep at the end of the class. Come see what everyone is talking about.

EBAY – BUYING AND SELLING

Dates: May 4 – May 18, Thursdays for 3 weeks Trainers: Computer Education Institute This class will make you a pro when it comes to EBay. Come learn from a specialist how to set up accounts, determine postage, determine the best verbiage for the items you are selling, and deter-mine a selling price. We will then have you sell your items on EBay and then show you how to get the best rating possible for future sales.

RASPBERRY PI – A COMPUTER FOR YOU *** NEW CLASS Dates: June 12 – June 26, Mondays for 3 weeks Trainers: Computer Education Institute The Raspberry Pi 3 is a tiny computer about the size of a credit card but comes with endless possibilities for everyone from programmers looking to create fun new projects to students learning about program-ming in the classroom. With the additions of Bluetooth and Wi-Fi, the Raspberry Pi 3 is able to be used as a central hub to connect smart home devices and sensors. As part of this class you will receive a Raspberry 3 to use and keep at the end of the class. Come see what everyone is talking about.

13

Computer Classes HELD at Arcelor Mittal/Burns Harbor-1275 1/2 McCool Rd.


OPEN LAB – EVERY TUESDAY Dates: January – June 10:00am – 6:00pm Trainers: Sam Laker

Every Tuesday we have a technician at the Computer lab waiting for you to bring in your very slow, broken, needing upgrading PCs! Here is a brief list of things we can help with: Fixing Slow or Broken Machines, Upgrading software /Transfer data, making sure your PC is Protected, and Upgrading Computers. Just stop by or call and make an appointment. This is an incredible opportunity, don’t miss it! Keep in mind if you need any hardware or non-free software you will need to purchase it. Sam will assist in getting you the necessary software and hardware.

FITNESS TRACKERS AND ON-LINE HEALTHY HELP

Dates: January 11 – January 25, Wednesdays for 3 weeks Trainers: Computer Education Institute

It’s the new year… what are you doing to keep healthy? THIS IS YOUR YEAR! Technology has made it much easier to get started. From Healthy recipes, to daily exercise programs (ok every other day if necessary), to fitness trackers, there has never been a better time. As part of this class you will receive a Fitness Tracker to help get you started.

AMAZON FIRE STICKS – New Class!!!!

Dates: January 23 –February 6, Mondays for 3 weeks Trainers: Computer Education Institute

With a huge selection of movies and TV episodes, voice search that actually works, and exclusive features like ASAP and Prime Music, Fire TV Stick is an easy way to enjoy Netflix, Amazon Video, Hulu, HBO NOW, low-cost movie rentals, live and on-demand sports, music, photos, games, and more. As part of this class you will receive a Fire stick to use and keep at the end of the class. Come see what everyone is talking about.

WORDPRESS – DESIGN A WEB-SITE

Dates: February 1 – March 1, Wednesdays for 5 weeks Trainers: Computer Education Institute Have you ever wanted to be a web designer? Well here is your chance. Learn all the new techniques to create a new interactive web site. We will walk you thru the proper steps in design, formatting, and linking your pages. Then when it is absolutely beautiful we will walk you thru publishing to the web. If you ever wanted to create your own website, this is the class for you.

14

Computer Classes HELD at Arcelor Mittal/Burns Harbor -1275 1/2 McCool Rd.


CLOUD STORAGE

Dates: February 2 – February 9, Thursdays for 2 weeks Trainers: Computer Education Institute Ok, everyone is talking about CLOUD, and how wonderful it is, but do you even know what it is? Come to this class and learn how to store your data, pictures and files using CLOUD. There is Google Drive, DropBox, Crashplan, iCloud, Microsoft One Drive (Skydrive), plus many more. Come see which one would be best for you, and why you should be using Cloud storage!

RASPBERRY PI – A COMPUTER FOR YOU *** NEW CLASS

Dates: February 13 – February 27, Mondays for 3 weeks Trainers: Computer Education Institute

The Raspberry Pi 3 is a tiny computer about the size of a credit card but comes with endless possibilities for everyone from programmers looking to create fun new projects to students learning about programming in the classroom. With the additions of Bluetooth and Wi-Fi, the Raspberry Pi 3 is able to be used as a central hub to connect smart home devices and sensors. As part of this class you will receive a Raspberry 3 to use and keep at the end of the class. Come see what everyone is talking about.

NETWORK+ CERTIFICATION

Dates: February 16 – May 25, Thursdays for 15 weeks Trainers: Computer Education Institute

Network+ is a testing program sponsored by the CompTIA that certifies the knowledge of networking technicians with 18-24 months experience in the IT industry. Earning the Network+ certification means that the candidate possesses the knowledge needed to configure and install the TCP/IP client.

VIRUS PROTECTION SEMINAR Dates: March 27, Monday one day Trainers: Computer Education Institute Having problems with your Internet? Are those pop-up’s driving you crazy? Not sure what is the best search engine to use? Security issues a big concern for you? Come to this 1 day class and you will once again be in love with the INTERNET!

15

Computer Classes HELD at Arcelor Mittal/Burns Harbor-1275 1/2 McCool Rd.


QUICKEN Dates: March 8 – April 5, Wednesdays for 5 weeks Trainers: Computer Education Institute Having trouble finding out where all your money went? Could you have really spent $5,000 on groceries? Come to this class and learn how to use the computer to keep track of all your bills, checks, deposits, etc. You will get a trial copy of Quicken with this class.

GETTING MOVIES FROM HERE TO THERE

Dates: April 3 – April 17, Mondays for 3 weeks Trainers: Computer Education Institute Are you tired of purchasing movie and not being able to put them on your iPad or computer? How about all of those DVD’s that you have sitting around the house, like to get them on your tablet or Computer? This class will show you the multiple software packages that are available to get you up and running. Say NO to just watching movies on your TV!

CREATE YOUR OWN PHOTO BOOK Dates: April 19 – May 17, Wednesdays for 5 weeks Trainers: Computer Education Institute This class will teach you how to go on-line and create your own personalized photo books, You will learn to use the one that best fits your needs. We will show you many many different sites to visit. We will show you our favorites and the ones that will save you the most money! We will help you to use the sites to create your own personalized book.

16

Computer Classes HELD at Arcelor Mittal/Burns Harbor -1275 1/2 McCool Rd.


UPGRADE THAT PC

Dates: May 8 – May 22, Mondays for 3 weeks Trainers: Computer Education Institute Need to upgrade your PC but you don’t want to have to deal with the Geek Squad and their expensive bills. Be your own Geek Squad! This class will show you hands-on how to upgrade a computer. If you want to bring in your own computer for upgrading, you can work on it in class.

HOME ENTERTAINMENT TECHNOLOGY Dates: June 1 – June 15, Thursdays for 3 weeks Trainers: Computer Education Institute In this class you will learn: Universal Remotes:Programming One Remote to do the work of Five Remote Controls; Using the One you have Recording TV; Recording off a satellite or cable box Recording TV; Programming a VCR with VCR+ Digital Video Recording; Tivo, ReplayTV Cabling; Which cables to use for your TV, VCR, DVD Player, Stereo, Camera A/V Receivers - Integrating all your home entertainment A/V Receivers _ Getting the best sound out of what you already have A/V Receivers _ Making surround sound work HDTV _ The future of television Computer _ Integrating your PC into a home entertainment system Going wireless _ Taking sound (and video) out of your living room Projectors _ turn your home into a real theater. COME HAVE FUN.

AMAZON ALEXA – New Class!!!!

Dates: June 5, Monday Trainers: Computer Education Institute You may have heard about Amazon Echo, well this is her “Little Sister”. Come learn how the dot Plays music, controls smart home devices, provides info, sets alarms, and more. Voice Controlled · Alexa Enabled As part of this class you will receive an Echo Dot to use and keep at the end of the class. Come see what everyone is talking about.

17

Computer Classes HELD at CEI -

100 W US Highway 20, Porter ~ 926-5740

Spouses can attend with employee at no charge

Class Times at 4 pm—7pm

PHOTOSHOP ELEMENTS Dates: March 7 – March 21, Tuesdays for 3 weeks Trainers: Computer Education Institute Times: 4-7pm Adobe Photoshop is the premiere image manipulation tool for both print and the Web. If you are planning on working with images in any way, you need to know it. Learn the basics of Photoshop in this thorough five-lesson beginner course. You will learn how to select, enhance, distort, color, scale and manipulate scanned images and artwork — or create them from scratch.

IPAD – USING IT MORE THAN YOU ARE NOW! Dates: April 5 – April 12, Wednesdays for 2 weeks Trainers: Computer Education Institute Times: 4-7pm So, once again Apple has come out with a new toy. Is it something that you should buy? This class will show you how to use an IPAD, what are the really cool things about it and what are the drawbacks. Learn about gestures, the parts of the screen and all of the buttons, the built in apps, connecting to Wi-FI, customizing your settings, backing up, using the Camera, Photostream, and much much more.

ITUNES – FINALLY UNDERSTANDING IT Dates: May 3 – May 10, Wednesdays for 2 weeks Trainers: Computer Education Institute Times: 4-7pm So, you have an “I” device and you are trying to figure out iTunes. Good luck. As simple as it may seem, it can also be very confusing. This class will teach you all about iRadio, syncing, the settings for iTunes, getting music into iTunes that was not purchase in iTunes, getting movies into iTunes not purchased in iTunes, and much much more!

18

Computer Classes Held at Local Union 1066 —

1221 E. Ridge Road, Gary ~ 888-5981


Updated: Raspberry Pi3 model B computer with Raspbian and KODI

Dates: January 10-January 19, Tuesdays and Thursdays for 2 weeks OR February 2-February 23, Thursdays for 4 weeks OR April 11-May 2, Tuesdays for 4 weeks Times: 11:00am-2:00pm OR 3:30pm-6:30pm Instructor: George Zahariadis This class now covers the Raspberry Pi 3 Model B, the high end model that sports a 64-bit 1.2GHz quad-core chipset and 1GB of RAM, built in Wi-Fi and Bluetooth. Pi3 is cited to deliver more than a 50% power bump compared to its predecessor. The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV and uses a standard keyboard and mouse. It's capable of doing everything you'd expect a desktop computer to do, from browsing the Internet and playing high-definition video, to making spreadsheets, word-processing, and playing games. This class also covers the LibreElec OS enabling you to run the popular KODI media streaming software and showing you how to stream movies, music, TV, and pictures. Attend this class to see the Raspberry Pi 3 uses; every person in this class now will get a Raspberry Pi 3 model B computer to use in class and keep at the completion of class.

**NEW Class: Amazon Fire Stick with Kodi

Dates: February 14-February 28, Tuesdays for 3 weeks OR May 11-May 25, Thursdays for 3 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis

Fire TV Stick connects your HDTV to a world of online entertainment. You get a huge selection of movies and TV episodes, and voice search capabilities. In this class we will learn how to install the KODI app on the Fire Stick to gain access to thousands more streaming selections. Every person in this class will get an Amazon Fire Stick with remote to use in class and keep at the completion of class.

19

Computer Classes Held at Local Union 1066 —

1221 E. Ridge Road, Gary ~ 888-5981


**NEW Class: Android TV Box with Kodi

Dates: March 7-March 21, Tuesdays for 3 weeks OR June 13-June 27, Tuesdays for 3 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis The Android TV Box 4K turns your TV into a fully featured "smart" device. An-ything a modern smartphone or tablet can do, now your TV can do it too and do it better. Stream content from Netflix, YouTube, Skype, Amazon Video, and many others as well as play games, and download from the Google Play Store. This 2Ghz 64bit Quad Core Android box supports Wi-Fi has full HD 4K and 1080p output and supports multiple external devices and comes with Kodi pre-installed. This Android box puts both Apple TV and Mac Mini used to run Kodi to shame. We will learn how to update and upgrade apps and Kodi on this box. Every person in this class will get an Android TV Box with remote to use in class and keep at the completion of class.

**NEW Class: RetroPie for Raspberry Pi

Dates: March 30-April 6, Tuesday & Thursday for 2 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis RetroPie allows you to turn your Raspberry Pi or PC into a retro-gaming machine. It builds upon Raspbian, EmulationStation, RetroArch and many other projects to enable you to play your favorite Arcade, home-console, and classic PC games with the minimum set-up. RetroPie sits on top of a full OS, you can install it on an existing Raspbian, or start with the RetroPie image and add additional software later. It's up to you. In this class you will learn how to install and use popular arcade game systems even get the specs on how to build your own arcade console. Every person in this class now will get a Raspberry Pi 3 model B computer and gamepad to use in class and keep at the completion of class.

20


Fitness Trackers and Comparisons

Dates: January 24, Tuesday for 1 week Times: 11:30am-1:30pm OR 3:30pm-5:30pm Instructor: George Zahariadis Have you ever thought of purchasing a fitness tracking device? Come to this class to see and compare the different fitness track watches and items available. We will show you the benefits and how to track and log your movements, heart rate, and even sleep patterns. We will use smart phone and PC software to track and log your history. Every student in this class will receive a fitness tracking watch to keep after class.

iPhone and iPad Tips and Tricks

Dates: January 11-January 18, Wednesdays for 2 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis

Are you an iPhone or iPad user? You should attend this class and become more productive and efficient in using them. Learn many tricks and tips that will make you enjoy your de-vice even more. We will be concentrating on the latest iOS system available at the time of class.

Desktop PC or Laptop Upgrade and Repair

Dates: April 13-May 4, Thursdays for 4 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis If you have been having troubles with your desktop PC or laptop and need repairs, upgrades, or just a tweak to your system to have it function more efficiently and faster, this class is for you. Bring

your desktop or laptop to class to review the possible issues or upgrades and costs available. Stu-dents will work with their systems and help each other on different desktop and laptop issues and upgrades. You'll learn through lecture, but most of all through hands-on experience.

Computer Classes McBride Hall, Local 1014, 1301 Texas Street — Gary

21


Upgrade to Windows 10

Dates: February 1 – February 8, Tuesday & Wednesdays for 2 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis All new Windows PCs, laptops, tablets, and phones, now come with Windows 10. If you have a Windows 7 or Windows 8 system, or thinking of purchasing a computer system or tablet in 2016, you should attend this class and educate yourself on Windows 10. This class will show you how to use the Windows 10 interface and its new features.

Linux – Ubuntu Operating System

Dates: February 15-March 1, Wednesdays for 3 weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis

In this class you will learn how to install Linux Ubuntu OS, navigate and use the operating system, install programs and devices and learn useful terminal commands. By the conclusion of this course, you will have the necessary knowledge and skills needed to navigate your way through this operating system and be able to take full advantage of the powerful features availa-ble in Linux Ubuntu. This is a great class for someone wanting to use an older desktop or laptop and take full advantage of the free Ubuntu operating system and programs available.

Microsoft Excel - Introduction

Dates: March 8-March 29, Wednesdays for 4 Weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis

This class introduces the skills necessary for productive development of work- books.

It includes tasks to explore Excel, create formulas, copy and move data, and print worksheets. The

student will also learn how to work with ranges and use the Office assistant, basic workbook skills,

and page setup. This class covers basic skills needed to prepare worksheets for publication. It in-

cludes tasks to format numbers, text, and cells.


22


Home and Business Security Camera Surveillance Systems

Dates: April 5-April 26, Wednesdays for 4 Weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis In this class we will guide students toward the best possible and most eco-nomical type of PC and Standalone Camera Security Systems and Digital Video Recorders, based on their requirements and budgets. If you have an

older PC, why not convert it to a surveillance system? We will show where to purchase and how to install different systems and use the internet to monitor and see what is happening in your home or business. Many small businesses in your area are in need of Surveillance systems, this class can provide a great part or full time income.

Wireless Alarm Security Systems for Home and Business

Dates: May 3-May 24, Wednesdays for 4 Weeks Times: 11:30am-2:00pm OR 3:30pm-6:00pm Instructor: George Zahariadis The types of Alarm Security systems can drastically differ in price, features, and quality. In this class we will compare and setup/install different types of wireless home-security systems. This class will help you find the wireless system that best fits your household or business needs. Purchasing your own home or business-security systems, allows you to bypass the monthly fees if you use a non-monitored system or we will show you how to save in monthly fees for a mon-itored system.

Visit Gary Works on Facebook: U.S. Steel Gary Works Career Development Program


23

Computer Classes HELD at Leon Lynch Training Center

1410 Broadway Avenue, East Chicago ~ 888-5981

Spouses can attend with employee at no charge All Classes at Leon Lynch are bases upon Approval

Updated: Raspberry Pi3 model B computer with Raspbian and KODI

Dates: January 10-January 19, Tuesdays and Thursdays for 2 weeks OR April 18-May 9, Tuesdays for 4 weeks Times: 7:30am-10:30am OR 7:00pm-10:00pm Instructor: George Zahariadis

This class now covers the Raspberry Pi 3 Model B, the high end model that sports a 64-bit 1.2GHz quad-core chipset and 1GB of RAM, built in Wi-Fi and Bluetooth. Pi3 is cited to deliver more than a 50% power bump compared to its predecessor. The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV and uses a standard keyboard and mouse. It's capable of doing everything you'd expect a desktop computer to do, from browsing the Internet and playing high-definition video, to making spreadsheets, word-processing, and playing games. This class also covers the LibreElec OS enabling you to run the popular KODI media streaming software and showing you how to stream movies, mu-sic, TV, and pictures. Attend this class to see the Raspberry Pi 3 uses; every person in this class now will get a Raspberry Pi 3 model B computer to use in class and keep at the completion of class.

Raspberry Pi (Part 2) - Customizing and Enhancing KODI

Dates: January 26-February 9, Thursdays for 3 weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm

Instructor: George Zahariadis Prerequisites: Raspberry Pi3 model B with Raspbian & KODI or KODI Knowledge

This is a continuation of the Raspberry Pi 3 class and will show you how to customize your KODI system to your preferences, how to get the latest updates, and work with builds, wiz-ards, and TV guides. Steps to enhance the performance of your KODI system will also be

discussed and practiced.

**NEW Class: Amazon Fire Stick with Kodi

Dates: January 30-February 8 (no class on February 6), Monday & Wednesdays for 2 weeks OR June 14-June 28, Wednesdays for 3 weeks Times: 8:30am-10:30am OR 7:00pm-9:00pm Instructor: George Zahariadis

Fire TV Stick connects your HDTV to a world of online entertainment. You get a huge selection of movies and TV episodes, and voice search capabilities. In this class we will learn how to install the KODI app on the Fire Stick to gain access to thousands more streaming selections. Every person in this class will get an Amazon Fire Stick with remote to use in class and keep at the comple-tion of class.

24




**NEW Class: Android TV Box with Kodi

Dates: April 5-April 12, Wednesdays & Thursday for 2 weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis

The Android TV Box 4K turns your TV into a fully featured "smart" device. Anything a modern smartphone or tablet can do, now your TV can do it too and do it better. Stream content from Netflix, YouTube, Skype, Amazon Video, and many others as well as play games, and download from the Google Play Store. This 2Ghz 64bit Quad Core Android box supports Wi-Fi has full HD 4K and 1080p output and supports multiple external devices and comes with Kodi pre-installed. This Android box puts both Apple TV and Mac Mini used to run Kodi to shame. We will learn how to update and up-grade apps and Kodi on this box. Every person in this class will get an Android TV Box with re-mote to use in class and keep at the completion of class.

Fitness Trackers and Comparisons

Dates: January 25, Wednesday for 1 week Times: 8:30am-10:30am OR 7:00pm-9:00pm Instructor: George Zahariadis

Come to this class to see and compare the different fitness track watches and items available. We will show you the benefits and how to track and log your movements, heart rate, and even sleep patterns. We will use smart phone and PC software to track and log your history. Every student in this class will receive a fitness tracking watch to keep after class.

iPhone and iPad Tips and Tricks

Dates: January 11-January 18, Wednesdays for 2 weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis

Are you an iPhone or iPad user? You should attend this class and become more productive and efficient in using them. Learn many tricks and tips that will

make you enjoy your device even more. We will be concentrating on the latest iOS sys-tem available at the time of class.

Upgrade to Windows 10

Dates: April 20-May 4, Thursdays for 3 weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis

All new Windows PCs, laptops, tablets, and phones, now come with Windows 10. If you have a Win-dows 7 or Windows 8 system, or thinking of purchasing a computer system or tablet in 2016, you should attend this class and educate yourself on Windows 10. This class will show you how to use the Windows 10 interface and its new features.

25




Desktop PC or Laptop Upgrade and Repair

Dates: February 15-March 8, Wednesdays for 4 weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis

If you have been having troubles with your desktop PC or laptop and need re-pairs, upgrades, or just a tweak to your system to have it function more effi-ciently and faster, this class is for you. Bring your desktop or laptop to class to review the possible issues or upgrades and costs available. Students will work with their systems and help each other on different desktop and laptop issues and upgrades. You'll learn through lecture, but most of all through hands-on experience.

Cell Phone Repair Technician

Dates: January 31-April 11, Tuesdays for 10 weeks (no class on March 28) Times: 7:30am-10:30am OR 7:00pm-10:00pm Instructor: George Zahariadis

The explosive growth in cellular subscribers equals a greater need for well-trained technicians to meet the growing demand. Classes are hands-on, so you gain immediate con-fidence in doing repairs starting with the correct use of tools for this industry. The following topics are covered: Replace broken glass digitizers, replace broken LCDs, disassemble the iPhone and Sam-sung Galaxy, open and dismantle all makes and models of cell phones. Data transfer and recovery, cell phone unlocking, water damage, physical damage, troubleshooting, advanced soldering tech-niques on replacing components on iPhone, Samsung, HTC, LG, Blackberry, Motorola and much more are covered in this class. Great extra or new income stream from cell phone repairs available for trained technicians. Take this class to tap into a multi-billion dollar market. Students can bring their own phones to class for repairs.

Microsoft Excel - Introduction

Dates: May 3-May 24, Wednesdays for 4 Weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis This class introduces the skills necessary for productive development of work- books. It includes tasks to explore Excel, create formulas, copy and move data, and print worksheets. The student will also learn how to work with ranges and use the Office assistant, basic workbook skills, and page setup. This class covers basic skills needed to prepare worksheets for publication. It includes tasks to format numbers, text, and cells.

26




Federal Tax Returns Using Turbo Tax

Dates: March 2 – March 16, Thursdays for 3 weeks Times: 9:00am-12:00am OR 3:30pm-6:30pm Instructor: George Zahariadis

Learn how to finish your taxes in three easy steps. Each student receives TurboTax 2016 for their personal taxes. This course introduces the Turbo Tax forms and performs all calculations automati-cally. The Final Review finds missing information, overlooked deductions, and entries that could trig-ger audits. It also gives you money-saving tax advice for this year and next. Turbo Tax prints ready-to-file IRS approved forms on plain paper or, you could file your federal tax returns electronically to receive your refunds faster. Tax laws and regulations change frequently and their application can vary widely based upon the specific facts and circumstances involved. Users are encouraged to con-sult their own professional tax advisors concerning their specific tax circumstances. ICD, USW, Z-Tech, and Intuit, disclaim any responsibility for the accuracy or adequacy of any positions taken by users in their tax returns. The above mentioned are not liable for any in direct, special, incidental, or consequential damages (including damages for loss of business, loss of profits or investments, or the like), whether based on breach of contracts, breach of warranty, tort, (including negligence), product liability or otherwise.

Home and Business Security Camera Surveillance Systems

Dates: May 11-June 1, Thursdays for 4 Weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis

In this class we will guide students toward the best possible and most economical type of PC and Standalone Camera Security Systems and Digital Video Recorders, based on their requirements and budgets. If you have an older PC, why not convert it to a surveillance system? We will show where to purchase and how to install different systems and use the

internet to monitor and see what is happening in your home or business. Many small businesses in your area are in need of Surveillance systems, this class can provide a great part or full time income.

Wireless Alarm Security Systems for Home and Business

Dates: June 20-June 29, Tuesdays and Thursdays for 2 Weeks Times: 8:00am-10:30am OR 7:00pm-9:30pm Instructor: George Zahariadis The types of Alarm Security systems can drastically differ in price, features, and quality. In this class we will compare and setup/install different types of wireless home-security systems. This class will help you find the wireless system that best fits your household or business needs. Purchasing your own home or business-security systems, al-lows you to bypass the monthly fees if you use a non-monitored system or we will show you how to save in monthly fees for a monitored system.

27

Investment / Stock Classes McBride Hall, Local 1014, 1301 Texas Street — Gary

The Art of Investing

This series of financial investment courses will be taught by Instructor Ed Guldenzopf,

a former stockbroker and securities principal.

Politics and Wall Street

Dates: February 3-March 10, Fridays for 6 weeks Times: 8am-10am or 4pm-6pm From presidential politics to public policy, to the Fed and the budgetary process in Congress, what impact does politics have on Wall Street, and ultimately, on your quest for financial profits? Come to this class and learn.

Apply Charts

Dates: June 16-July 21, Fridays for 6 weeks Times: 8am-10am or 4pm-6pm

Using charts is an important tool in making profits on Wall Street. But, like everything else, there are dos and don’ts. In this class, we will explore some of the better ways to use charts, all with an eye towards making you money.

Detecting Trends

Dates: May 5-June 9, Fridays for 6 weeks Times: 8am-10am or 4pm-6pm It’s been said the trend is your friend when it comes to financial markets. Here we will learn how to look for in trends on Wall Street and apply them in various money-making scenarios.

Rising Interest Rates

Dates: March 17-April 28, Fridays for 6 weeks Times: 8am-10am or 4pm-6pm

How can you profit in an environment of rising interest rates when it comes to stocks and bonds when it looks like that is where the markets are headed. Come to this class and walk away with a better chance to increase your bottom line.

NO INVESTMENT ADVICE WILL BE GIVEN BY THE INSTRUCTOR. THE COURSE IS SOLELY EDUCATIONAL IN NATURE.

28

Paralegal Studies at Gary Works Local Union 1066 — 1221 E. Ridge Road, Gary

The Paralegal Certificate program prepares you to work directly under the supervision of an attorney or to perform general background work in the legal environment. Upon successful completion of the ten required courses, you will earn a Paralegal Certificate from the American Paralegal Institute. Classes are taught by Attorney Ed Guldenzopf.

Contracts

Dates: February 2- April 6, Thursdays 10 for weeks Times: 8am-11am or 4pm-7pm This course emphasizes contract theory, focusing especially on the basic elements of a contract: agreements, consideration, capacity and legality. The elements will be considered at length. Many applications will be provided to the participant.

Property I

Dates: April 12-June 14, Wednesdays for 10 weeks Times: 8am-11am or 4pm-7pm Such personal property concepts as bailments and gifts, and real property concepts such as estates and future interests will be considered, as will the idea that property is bundle rights.

Wills and Trusts

Dates: April 13 – June 15, Thursdays for 10 weeks Times: 8am-11am or 4pm-7pm This course will cover the basic elements of wills and trusts. The participant will learn about the various requirements needed to effectuate a will or trust. A focus of the course may include estate planning.

Civil Procedure

Dates: February 1- April 5, Wednesdays for 10 weeks Times: 8am-11am or 3pm-7pm This course exposes the participant to the matters involved in commencing and resolving a lawsuit in civil court. Examples of complaints, answers, and various litigation motions will be offered. Such legal procedures as the discovery process and establishing jurisdiction will be considered. Finally, the participant will study various legal documents such as a complaint.

29

Gary Works Career Development Center Local Union 1066 - 1221 E. Ridge Road, Gary

Solutions at Work

Dates: January 24 – April 11, Tuesdays for 12 weeks Times: 8am-10am or 4pm-6pm

The purpose of this program is to provide resources and education for em-ployees on fitness and nutrition to improve their quality of life. Nutrition will be the first hour of class and exercise will be the second hour. Please dress in comfortable clothes and athletic shoes in order to fully participate. Each student must complete a Fitness Assessment prior to starting class. Contact Ashlee Johnson at Omni with any questions at 219-983-9832 Ext 210. This 3-month program consists of 12-nutrition sessions and 12-fitness training sessions. Each week participants will meet with a nutrition instructor to discuss different topics such as Pro-teins,Fats,Carbs,Portion Control etc… In addition participants will also meet with a Certified Person-al Trainer to learn and discuss different elements of physical activity. The program also allows partic-ipant’s full access to both fitness centers (Chesterton and Schererville) throughout the 12 weeks. Both facilities offer over 60 Group Exercise Classes each week for all fitness levels. Please check website for a full description of classes and schedules.

Fitness for Life Dates: April 17-May 22, Monday for 6 weeks Times: 8am-9am or 4pm-5pm Instructor: Denny Finnearty

The Fitness and Nutritional training program, Fitness for Life, provided by Universal Fitness and Training are designed to provide participants with the knowledge to differentiate between healthy and unhealthy lifestyle patterns. Participants will learn to classify food sources and food groups and to interpret product labels as well as nutritional content and value. Discussions will cover how healthy eating habits maintain a healthy weight, lower the risk of disease, keep all body systems functioning properly, and create energy and well-being. We will also explain how beneficial daily physical activity is and its contributions to overall wellness.

Travel: Choose Your Own Adventure

Dates: January 24, Tuesday for 1 day Times: 9am-Noon OR 3pm-6pm Instructor: Katie Taylor r

You don’t have to be a millionaire to travel far and wide. Learn how to make most of your vacations by creating memorable trips. In this one day seminar, you’ll learn:

The best websites for booking trips for less How to balance your money between basic travel expenses and the fun extras How to find all the information you need to smooth out potential problems Tricks of the Trade-tips from a world traveler.

Whether you want to travel in the United States or abroad, learn how to make the most of your trips in this three-hour class. Oh the places you’ll go!

30

Gary Works Career Development Center Local Union 1066 — 1221 E. Ridge Road, Gary

Residential Electrical Wiring

Dates: January 10-February 28, Tuesday 8 weeks. Times: 8am-11:00am OR 3:30pm-6:30pm Instructor: Bill Cameon This class will help participants on completing tasks that will benefit then by using safe wiring procedures required by the National Electrical Code and local Codes. Wiring of switches, receptacles and hanging lighting fixtures will be performed. Discussion will participants realize unsafe conditions that may exist in their homes, such as where GFCI’s are required, smoke detectors and the misuse of temporary wiring practices that create a hazard. There will be several hands-on items along with lecture discussion.

Getting the Most Out of Your Digital Camera: A Five Week Class Dates: May 26-June 23, Fridays for 5 weeks Times: 9am-Noon OR 3:30pm-6:30pm Instructor: Bill Staniec We will get into the many features that most digital cameras have hidden away. Camera operation and photo composition will be covered in depth. There will be weekly assignments designed to make you a better and more confident photographer. Hopefully, this class will be informative and fun. Photography is a great hobby; enjoy it with some sound photographic skills that you will learn in this class.

Photo II: A Five Week Class Dates: March 31-May 5, Friday 5 weeks (No Class April 14) Times: 9am-Noon OR 3:30pm-6:30pm Instructor: Bill Staniec In Digital Photo II, continue your photographic thinking and go beyond regular through the lens (TTL) metering and learn methods that will allow you be more precise with exposure and color. Focus on techniques to improve the technical aspects of your photographs. Histograms, grey cards, color temperature, white balance, and light meters are just some of the lessons we will cover in Photo II. These lessons will help you develop strategic approaches to handle mixed lighting and other hard-to-shoot situations so you may better predict your photograph's outcome before you shoot. We will also continue to focus on the artistic side of photography, and many of the lessons will cover approaches to aesthetically improve your photography. With discussions on composition, shadows, lighting and angle, to name a few, you will discover new ways to see and capture imagery from the world around you. By combining technical and artistic lessons, Digital Photo II will provide a solid framework to allow you to improve your photographs overall. You must have a general understanding of how aperture, shutter speed and ISO are manipulated to achieve the correct exposure using your camera's TTL metering.

31


Money for College

Dates: January 27, Friday 1 day class Times: 3:30pm-6:30pm Instructor: Robert Smith

Seeking scholarships for your child or grandchild? This seminar will give you the momentum you need to prepare for success. First hear about the basics of seeking assistance for college, including types of financial help, the typical deadlines and some search strategies for your states’ residents. Second, discuss saving for college ithe governments opportunities and how to jump smoothly through their hoops. Then we will get online and begin an exploration of what’s currently available to you. Finally, access the instructors help for six months as you pursue your search for support. An up-to-date hand book and materials are included. Bring family members, especially students!

Industrial Math Tune-UP

Dates: February 9-March 9, Thursdays 5 weeks Times: 8am-11am or 3:30pm-6:30pm Instructor: Robert Smith

This course teaches the technical math expectations and nothing more. If your goal is to become an industrial specialist but your math is more rusty than trusty, this tune-up will provide practice and self confidence. Meet the tests of future occupational challenges in the company of fellow wannabies. This class accompanies Bill Cameon’s technical classes.

Non-Profits: How to Form One

Dates: March 16, Thursday 1 day class Times: 8am-11am or 3:30pm-6:30pm Instructor: Robert Smith

Everyone faces the same rules when starting a no-for-profit organization. So why do some people get their applications approved in a few weeks while others get bogged down for more than a year? This class answers that question, shows both the guidelines to follow and pitfalls to avoid. Many steelworkers have already started 501© (3)s, and you can too. This gets you started, and continued access to the instructor afterward allows a smooth follow through. Success brings benefits to your community, tax freedom, and increased eligibility for grant awards.

Introduction into Web Design and Development

Dates: February 1 – May 30 Times:8am – Noon OR 4pm-8pm Instructor: Daniel Owsley This class will cover the basics of building, publishing and maintaining a website. Also the basics of HTML,CSS, JavaScript, PHP and MySOL as the languages to build a website. You will learn how and where to gather information to continue to improve your skills as a web designer.

32


Thermoplastic Welding

Dates: March 8– March 29, Wednesday for 4 weeks Times: 8am-11am or 4pm-7pm Instructor: Jim Balina Topics covered: Filler material selection, identification, joint design and equipment setup with emphasis on bead types and applications. Upon completion of the course students will be able to perform fillet and groove welds using thermoplastic materials. Each student will receive a 80 watt iron plastic welding kit at completion of course.

Basic Motorcycle Maintenance & Repair

Dates: April 5- May 10, Wednesdays for 6 weeks Times: 8am-11am or 4pm-7pm Instructor: TBA

This class incorporates the latest tips & techniques available for the upkeep & repair of motorcycles. Students will gain hands on experience in all facets of motorcycle systems. This class can save students thousands of dollars. Bring in your bike and get it in top condition. An OIL CHANGE FOR YOUR BIKE IS INCLUDED IN CLASS!

Stained Glass Lamp

Dates: March 8- April 12, Wednesdays 6 weeks. Times: 8am-Noon OR 2pm-7pm Location: Gary Career Development Instructor: Beth Harrigan Students will create a decorative lamp for their home. Pattern books, glass and the lamp base will be provided for the students to create a unique and beautiful addition to add a splash of color to their home décor.

Mosaic Garden Bench/Open Lab

Dates: May 3- June 7, Wednesday 6 weeks Times: 8am-Noon OR 2pm-7pm Location: Gary Career Development Instructor: Beth Harrigan Learn the art of glass mosaics and create your own unique outdoor concrete garden bench. Learn how to transfer a template on to your bench top and cut the glass tile into shapes with two wheeled nippers. You will also learn to use glue and grout. The bench, glass, grout and all supplies needed

are included.

33


COMM 104 Workplace Communication—3 Credit hours Dates: January 16-May 8, Mondays for 16 weeks Times: 8am-12pm OR 3:30pm-7:30pm Instructor: Robert Smith Prerequisites: ENGL 093 Introduction to College Writing and ENGL 083 Reading Strategies for College or ENGL 095 Integrated Reading and Writing or FOUN 071 Tech Foundations II This course focuses on developing workplace communication skills for students in programs within Ivy Tech’s School of Technology. This course will define characteristics of communication in different workplace contexts, including barriers to effective communication. It will also afford students opportunities to examine and practice strategies for listening critically, building functional interpersonal work relationships, communicating in groups, and enhancing self-expression. Another course focus will be on technology-driven communication channels that are common in the workplace so that students can become effective consumers and providers of information in these channels. By taking a pragmatic approach to understanding human communication, students will increase their workplace as well as their personal communication competence.

“Cooking The Dutch Oven Way”

Dates: May 15-June 12, Mondays for 4 weeks (No class May 29) Times: 8am-11am or 4pm-7pm Instructor: Jeff Berghoff

Come to class and learn to cook outdoors with both traditional and modern recipes and techniques to fully enjoy one of the most enjoyable methods of cooking outdoors – THE DUTCH OVEN WAY!

Build your Own Barbeque or Cooler Cart

Dates: May 17- June 14, Wednesdays for 5 weeks Times: 8am-11am or 4pm-7pm Instructor: Jim Balina

BBQ Cart - Come to class and build a versatile backyard addition for your outdoor entertaining. This outdoor work center on wheels offers generous tiled counter space with storage for charcoal, propane, spices and grilling tools. All wood, materials, hardware and tools will be provided. Cooler Cart - Build a beautiful, yet functional ice chest cart for your deck, patio or backyard. We will supply the pattern, materials and of course the tools needed to complete the cart in this 5 week course. Earn some extra income and make this for your family and friends. Start your summer off right with this exciting project.

34


Planning for Retirement?

Dates: February 7, Tuesday or May 2, Tuesday 1 day class Times: 4pm-7pm Instructor: Mike Miller and Amanda Schrama A successful retirement requires clear goals, careful planning and diligence. Establishing your financial goals is an important step in retirement planning, and the guidance of an experienced and knowledgeable professional can help you to realize these goals. A Morgan Stanley Financial Advisor can work with you to create a retirement strategy designed to meet you specific objectives and address your unique challenges. Join us and learn how we can help you achieve your retirement goals.

Understanding Investment Risk

Dates: April 4, Tuesday 1 day class Times: 4pm-7pm Instructor: Mike Miller

Many factors can play a role in the potential risks and returns associated with an investment. A thorough understanding of the risks involved with investing is important when selecting the investments that are right for you. This seminar will provide an overview of investment risk and help you to understand how to manage this risk when developing an investment strategy and selecting investment options.

Drive co-CDL

Dates: January 30—April 3, Mondays for 10 weeks Times:8am – Noon OR 4pm-8pm

The world needs more truck drivers. Truck drivers transport goods around the country. Driveco’s Tractor Trailer Driving program is designed to teach you everything you need to know to successfully maneuver a tractor trailer. You will be capable of operating a tractor trailer with a gross vehicle weight of 80,000 lbs., an articulated vehicle with a trailer in excess of 10,001 lbs., or a straight truck in excess of 26,001 lbs. This training will provide you with range and road skills along with in-depth classroom material to help you develop your career as a Tractor Trailer Driver.

Sametime- Navigating the Employee Portal

Do you need to use the US Steel employee portal but aren’t sure how to use it? This 1 hour class will teach the in’s and out’s of SAMETIME, navigating the US Steel employee portal. This is a 1 hour class. Please chose from one of the sessions listed below Date & Times: Monday, January 23 @ 8am Monday, January 30 @ 4pm

Monday, February 27 @ 4pm Tuesday, March 28 @ 4pm Wednesday April 19 @ 8am Thursday, June 1 @ 4 pm

35

HELD at Leon Lynch Training Center 1410 Broadway Avenue, East Chicago ~ 888-5981

All Classes at Leon Lynch are bases upon Approval

Learn to Play the Piano/Keyboard – Level 1 Dates: January 12-March 16, Thursdays for 10 weeks OR April 18-June 20, Tuesdays for 10 weeks Times: FIRST 5 Weeks: 11:15am-12:30pm or 4:45pm-6:00pm LAST 5 Weeks: 11:15am-1:15pm and 4:45pm-6:45pm Instructor: Frances Zahariadis

Learning and playing the piano/keyboard can open up an incredible door of creativity for you, as well as a fulfilling life of music making. Learn from an instructor with over 35 years of playing experience. This class will take someone who is new or with little experience, through a solid foundation of music theory and the basics of piano/keyboard playing. This class will also cover and teach you the basic chords along with chord progressions. Knowledge of Chords will eventually assist you in learning to accompany other instruments, as well as singing along. This class can serve as the beginning of your musical journey.

Learn to Play the Piano/Keyboard – Level 2

Prerequisite: Learning to Play the Piano/Keyboard -Level 1 or equivalent knowledge Dates: April 20-June 22, Thursdays for 10 weeks Times: 11:15am-12:30pm and 4:45pm-6:00pm

This class is a continuation of Piano/Keyboard -Level 1. Students will continue to learn more music theory, which will give them the ability to play a wider variety of songs. Additional notes and tech-niques will be introduced, giving students the opportunity to play songs with fuller sounds.


Prerequisite: Learning to Play the Piano/Keyboard -Level 2 or equivalent knowledge Dates: January 12-March 16, Thursdays for 10 weeks Times: 10:00am-11:15am or 3:30pm-4:45pm Instructor: Frances Zahariadis This class is a continuation of Piano/Keyboard -Level 2. Students will continue to learn more music theory and advanced techniques. Students will be assigned music every week to practice and play in class for the instructor. Lab time will be incorporated in this class.


Prerequisite: Learning to Play the Piano/Keyboard -Level 3 Dates: April 20-June 22, Thursdays for 10 weeks Times: 10:00am-11:15am or 3:30pm-4:45pm Instructor: Frances Zahariadis

This class is a continuation of Piano/Keyboard -Level 3. Students will continue to learn more music theory and advanced techniques. Students will be assigned music every week to practice and play in class for the instructor. Lab time will be incorporated in this class.

36

Career Development Classes @ Various Locations

Fitness Thru Self-Defense

Dates: January 9 –February 17, Mondays AND Fridays for 6 weeks OR April 13 -May 12, Mondays AND Fridays for 6 weeks Times: 6pm-7:30pm Instructors: Brian Saule and Amy Messmer Location: 5822 E. US HWY 6, Portage Are you tired of the same boring workout routines? Come experience physical fitness through the art of self defense. Improve strength, muscle tone, and flexibility while learning self-defense from and instructor with over 15 years of experience. Learn proper stretching methods, efficient strikes and basic self-defense tactics, spouses are welcome for free with employee.

Tutoring

Dates & Times: As arranged Instructor: Robert Smith Tutoring is available to active steelworkers in virtually any subject area. Whether it is math, test preparation, or some other subject matter, receive the personalized assistance you need for a short-term or long-term learning experience. Meet with a veteran teacher at times and places that fit your schedule’s changing demands. Please call YOUR career Development Office Gary 884-7930 OR Midwest 762-1010 to get scheduled today.

Arts and Craft Workshop

Dates: April 3 – May 8, Mondays for 6 weeks Times: 8am-6pm, come whatever time works Instructor: Kim Riley Location: 266 Stone Ridge Court, Chesterton, IN Do you have any projects that you have always wanted to make and were not sure of what to buy or how to start? Have you ever wanted to paint or etch glass, cast leaves with concrete to make stepping stones or paint on furniture? You have my entire studio at your disposal. You can bring in any project or use the supplies of use the supplies I have on hand to make a variety of projects. The doors open at 8am until 6pm.

37

Midwest Career Development Center 1919 Willowcreek Rd., Portage ~ Local 6103 Union Hall

2017 National Electrical Code

Dates: January 19 – March 16, Thursday 8 weeks. ( no class Feb. 2) Times: 8am-11:00am or 3:30pm-6:30pm Instructor: Bill Cameon

This course covers the current National Electrical Code and prepares participants for safe installations of electrical tasks. A person taking this course is better prepared to do safe electrical installations and has a better chance of scoring higher on electrical exams for contractors licensing. Each week a different chapter of electrical systems is covered and discussed using a lecture format and Power Point Presentations. Each participant will receive the 2017 National Electric Code book, Chapter Tabs and the 2017 Electrical Systems based on the 2017 workbook.

Glass Etching – Beginning and Advanced

Dates: March 9-30 Thursday, 4 week class Times: 8am-11am or 4pm-7pm Instructor: Jim Balina

Glass etching is the abrading or roughening of a piece of glass in selected areas in order to produce a design. It is a way to produce a “frosted” design on the surface of a piece of glass, but it is much more that that! It can also be used to carve a design deep into the glass or to produce a shaded design that looks like delicate airbrushing but is permanently etched in the glass. Using the same equipment and techniques, it is also possible to etch or carve on stone, ceramic or wood. We will be introducing sand blasting in the advanced class.

Auto Heating and Cooling

Dates: April 6- May11, Thursdays for 5 weeks Times: 8am-11am or 4pm-7pm Instructor: Jim Balina

This course is intended to give the student a thorough understanding of the HVAC system used on all vehicles. The student will learn how to use all the modern test equipment and also learn proper test procedures. The students will learn proper techniques to look up diagnostics procedures, test specifications, and much more. Bring your own car to work on in class!

Like US — Midwest on Facebook U.S. Steel Midwest Career Development Program

38


Basic Cement Jewelry I & II

Dates: January 23 – February 20, Mondays for 5 weeks Times: 8am – Noon OR 3pm -7pm Instructor: Lynn Mason In Part I of this class the basics of casting cement, mixing cement, curing times, staining, sealing and troubleshooting. They will make and complete 3 different items. They can choose leather or ribbon from where they can hang their completed piece of jewelry. Students will receive a mold of their choice, cement and their three finished products they completed. In Part II of this class the student will learn how to cast earrings with or without the metal finding or how to glue findings to the cement and cast and complete matching necklace, sealing and finishing making it ready to wear. They will also cast a pin which the finding can be imbedded or glued.

Cement Jewelry Unique Accents I

Dates: February 28—March 14, Tuesdays for 3 weeks Times: 8am – Noon OR 3pm -7pm Instructor: Lynn Mason Prerequisite Basic Cement Jewelry 1 & II This class is going to consist of time casting or gluing items to the cast piece of cement by imbedding or gluing the item to the cement and then finishing with a sealer. You have then created three unique one of kind pieces of jewelry. These are great for gifts or selling.

Cement Jewelry With Metal Accents

Dates: June 13 - June 27, Mondays for 3 weeks Times: 8am – Noon OR 3pm -7pm Instructor: Lynn Mason Prerequisite Basic Cement Jewelry 1 & II This class is reinforcing the first two classes and adding metal to the casting to make each a truly custom one of a kind artistic creation. The student will have the opportunity to completely finish three pieces of their choice.

39


Cake & Cupcake Decorating Dates: February 2- February 23, Thursdays for 4 weeks Times: 8am-11am or 4pm-7pm Instructor: TBA Learn from a pro! This course is designed to acquaint students with the tools and techniques that are used to decorate cakes and cupcakes in a variety of styles. This course is 100% hands on. The course covers frosting, borders, color combinations, piping, flowers and writing.

“All About SMOKERS” Dates: May 16-June 6, Tuesdays for 4 weeks Times: 8am-11am or 4pm-7pm Instructor: Jeff Berghoff

This is your opportunity to learn to be a backyard Pit Master! In this 12 hour class, you will learn about marinades, rubs, sauces and mops. You will make and take home your own Memphis Dust Rub that brings out the flavors of many meats. Learn about proper smoking times and tempera-tures, the many woods used in smoking and the foods that they best pair with for maximum flavor. We will smoke seafood, chicken, beef and vegetables and you’ll get to taste our results. Also each week we smoke using a different wood so the students get a great feel for that particular wood. The use of our rub is very tasty. We smoke cheeses, spices, and prepare smoked pig on the beach us-ing shrimp and sausage, smoked chicken cherry bombs, beef and pork meatloaf muffins, bacon wrapped stuffed sausage fatty, smoked tilapia, and smoked salmon. Be the best backyard cook in your neighborhood! Amaze your family and friends with the mouth watering meals you can prepare using your smoker. This is your chance to be your own Pit Master.

Build A Game Table

Dates: May 18-June 15, Thursdays for 5 weeks Times: 8am-11am or 4pm-7pm Instructor: Jim Balina It’s game on with this beautiful indoor game table. The inlaid table top will be a chess/checker board made from wood veneer. You will be expertly guided through the project by observing a demonstra-tion of each step as you build your own table. All wood, materials, tools and hardwood will be pro-vided in class.

40


Electronic Workshop/ Open Lab - 1

Dates: February 1-March 15, Wednesdays 7 weeks Times: 8am-11am or 3:30pm-6:30pm Instructor: Jimmy Morson Learn electronics by bringing in your own projects to work on. Learn to troubleshoot and identify electronic components.

Electronic Workshop / Open Lab - 2

Dates: March 29- May 10, Wednesdays 7 weeks. Times: 8am-11am or 3:30pm-6:30pm Instructor: Jimmy Morson Electronic workshop -2 is a continuation of Electronic Workshop -1. In this class you can continue to work on projects not yet finished and bring in new ones to work on.

Personalized Wood Signs and Decor Dates: January 24 – February 21, Tuesdays for 5 weeks Times: 8am-11pm OR 3:30pm-6:30pm Instructor: Kim Woods Construct personalized, fun and unique wood decor projects from scratch. In this class you will see how to put signs together. Also, you will learn all the techniques to get your board to have your own look. The students will do a hands-on take home project each week.

Vinyl Cutting Workshop Dates: May 17—June 7, Wednesdays for 4 weeks Times: 8am-11pm OR 3:30pm-6:30pm Instructor: Kim Woods The students will get to use different types of vinyl. Using the Silhouette Cameo Cutter learn how to use Heat transfer for T-Shirts. Also, the students will learn how to make signs using a stencil mask. These vinyl’s are also great for scrap books and card making.

41


Stained Glass Garden Stakes

Dates: March 6- April 10, Mondays for 6 weeks Times: 8am-12pm OR 2pm-7pm Instructor: Beth Harrigan Students will make a garden stake to decorate their yard and garden. These will be made by design-ing a pattern, cutting the glass, soldering the pieces, and attaching to a wrought iron garden stake to create a beautiful and unique piece of art work

Stained Glass Sun Catchers and Wind Chimes Dates: May 8- June 19, Mondays for 6 weeks (No class May 29) Times: 8am-12pm OR 2pm-7pm Instructor: Beth Harrigan Did you know Ancient Chinese invented wind chimes to balance the Yin and Yang energies of a home by placing wind chimes outside the doorways. It’s all about the Feng Shui! Students will use glass shells and beads to create a beautiful wind chime for their home

Appliance Troubleshooting Basic & Advanced

Dates: March 21—May 9, Tuesdays for 8 weeks Times: 8am-11am OR 4pm-7pm Instructor: Roland Alverez

This class is for the beginner to advanced student. The new technology in major appliances has changed dramatically. This 8-week hand on course will provide the student and updated knowledge of how to troubleshoot, diagnose, and then repair a variety of major appliances with an understand-ing of this new technology.

Where Is Your Money Taking You? - Financial Workshop

Date: March 2, Thursday for 1 day Times: 8:30 am - 10 am OR 4:00 pm - 5:30 pm Instructor: Amy Messner

Where Is Your Money Taking You? If you’re not planning correctly, you could be on a financial road to nowhere. Find out how to give your finances a kick start. There’s a beautiful future on the horizon, and it’s calling your name. The three root causes of the financial problems most families face are: 1. Failure to Plan 2. Being uninformed 3. Misinformation This informative seminar will discuss the following issues The Rule of 72 , Debt Stacking, Revolving Debt Traps How Your Life Insurance Policy Works Understand and apply these principles, and you could change the face of your financial situation.

42


Framing/Siding

Dates: March 20 - May 8, Mondays for 8 weeks Times: 8am-11:00am or 3:30pm-6:30pm Instructor: Bill Cameon

In this hands-on class, students will learn and help to install steel siding on Post Frame buildings. Wood framing will be involved to complete the framing to accept the steel siding. We will also learn how and create the openings for doors and windows. Then we will install the windows and doors in the openings. Students will be introduced to and use power tools and tools that are unique to this type of work.

Electrical

Dates: May 15 – June 12, Mondays for 4 weeks Times: 8am-11:00am or 3:30pm-6:30pm Instructor: Bill Cameon

This class will be installing electrical conduits and components that are required by the National Electric Code for a safe and carefree environment. The class will learn conduit bending, proper type and size of wiring and the type of boxes and other material and how to terminate all item for a com-plete installation.

Insulation Dates: June 19 - 26, Mondays for 2 weeks Times: 8am-11:00am or 3:30pm-6:30pm Instructor: Bill Cameon

Insulation installed to satisfy the International energy code will be discussed. The proper type and r value of insulation will be used and the modern technique will be the main topic of a properly insulat-ed building for this climate zone.

Drywall Dates: July 10 - 31, Mondays for 4 weeks Times: 8am-11:00am or 3:30pm-6:30pm Instructor: Bill Cameon Hanging and taping drywall will be the main focus of this class. Participants will be expected to par-ticipate in all facets of the drywall installation and should get a pretty good idea of the amount of ef-fort and time it will take to become a proficient drywall person.

43


Jewelry Classes Saturday Workshops (lunch will be provided)

Classes presented by Hands in Harmony Instructor: Rhoda Jenkins

WIRE WEAVING DESIGNS

Date: January 14th Saturday (1 day only) Time: 9 am - 2:00 pm

Achieve success with wire weaving designs in a variety of styles with step-by-step guidance. Learn versatile techniques that will become the foundation for any wire-weaving projects. Beginning with the figure-eight and modified Soumak weaves. Shar-ing the secret to achieving tight, consistent weaves, and shows you how to incorporate thicker-gauge wire and texturizing techniques into your work for enhanced dimension. Explore layering and "sewing" methods to create elegant woven bands and decorative adornments, and learn how to securely attach an elegant bead or crystal to your design.

THE BEAUTY OF BEADS

Date: February 18th Saturday (1 day only) Time: 9am – 2:00pm

If you're looking for ways to make your bead designs more dynamic, these beautiful bead weaving techniques will definitely put you on the right track. From spiral stitching to openwork weaving, these beading patterns will If give your designs that extra detail that takes them from standard to stunning. Try incorporating some of these techniques in your next pieces, and you'll be amazed with the re-sults.

THE ART OF FOCAL BEADING

Dates: March 11th Saturday ( 1 day only) Time: 9 am - 2:00 pm

Discover essential forming, forging and fabrication techniques to turn heavy-gauge wire into high-end designs. Learn how to incorporate heavy-gauge embellishments into your designs, including coils, captured beads and a spiral-wire clasp. Add dimension to ear wires and earrings with a lesson on annealing textural wire strips, and craft an eye-catching pieces with a simple wrapping technique. Learn to make elegant and an array of elegant styles combining interlocking links with ease. Gain the skills to work with heavy-gauge wire, and elevate your designs today!

EVERYTHING JEWELED WITH FABRIC

Date: April 22nd

Saturday ( 1 day only) Time: 9 am - 2:00 pm

The fabric stand on its own, you'll learn so many ways to work with all different types of fabric as you peruse these Change it up! Trade in your shiny baubles and chains for something a bit on the softer side with these fabric craft ideas. These fabric projects will show you how to create jewelry with a flowy feminine air. Whether you're embellishing the fabric with beads, using scraps to upcycle an old piece, or letting free jewelry patterns. Fabric crafts aren't just for clothes and handbags. Manipulate material in a new way with these fabulous fabric craft ideas for jewelry.

44


Retire Ready

Date: April 17– May 1, Mondays for 3 weeks

Times: 8:30-10am OR 4:00 pm - 5:30 pm Instructor: Rob Engel

Are you trying to make the best decisions possible regarding your retirement but not sure where to start? Not sure what to do with your 401(k) when you retire? Many have come to realize that the stock market is risky and they don't want to worry about running out of money be-cause of a downturn in the market. We’ll cover the retirement process including SWPT, PBGC and Social Security and the resources you have available to make the best decisions possible. Have you considered an annuity but aren’t sure if it’s the best investment for you? Perhaps you’re trying to fig-ure out what state you should retire in to minimize taxes in retirement. Maybe you have experienced having a parent go into a nursing home and you’re thinking about how to protect everything you’ve saved if you need to go into a nursing home. Learn how to decide for yourself if an annuity is an ap-propriate investment for part of your retirement nest egg after learning what kinds of annuities there are and why they may not be the best investment for everyone. Learn valuable tips regarding where the best states to retire are based on your sources of retirement income. We will discuss specific strategies that will allow you to protect your hard earned retirement savings in the event you need Medicaid assistance. Finally, students will learn what retirement options are available to ensure you maximize the benefits you've earned rather than leave money on the table. Are you serious about making sure your money lasts longer than you do? This three week class will help you make sure you’re making the right choices to get the most out of your hard-earned retirement savings.

Social Security

Date: January 26, Thursday for 1 Day OR Wednesday for 1 Day Times: 8:30-10am OR 4:00 pm - 5:30 pm Instructor: Rob Engel

Do you have questions regarding Social Security? Learn about valuable strategies such as “Claim Now, Claim More Later” and “File and Suspend.” Learn how they work and when if they may be appro-

priate for your specific situation. Learn how your Social Security benefit is calculated and about the var-

ious terms used such as AIME and PIA, and what they mean. Are you worried Social Security may not be there through your entire retirement? We’ll examine the Social Security Trustees’ report which looks

at the next 75 years and what you can expect. Did you know that your Social Security benefits may be taxed? We’ll cover when and how much of your benefit will be included in taxable income. Are you con-

sidering taking your Social Security benefit while you are still working? We’ll cover what happens if you collect while still employed and how much of your benefit you’ll be required to pay back into the system

if you do. Do you want to get the most out of Social Security? Waiting to claim in order to get the high-est monthly benefit may not be the best decision for everyone. Learn how to use the tools available to

you to calculate what the best course of action may be depending on your individual situation. No two families are identical and what may be the right choice for someone else may not be the best decision

for you. Learn how to navigate the Social Security options available for you so you can make the most

of Social Security and have the retirement you deserve.

45


Lawn Equipment Maintenance and Repair - Winter

Dates: January 13 – March 31, Fridays for 12 weeks Times: 8am -11am OR 4pm-7pm Instructor: Mike Daly A foot of the fresh snow has just fallen and when attempting to start your snow blower, the starter cord snapped. When conditions were a little greener outside, your lawnmower was becoming increasingly hard to get started. Is your lawn equipment letting you down? Why not familiarize yourself with the equipment you own by taking this class and learning how to repair it. Students may bring mowers snow blowers, chain saws and other machines for simple repairs or complete overhauls. Two service manuals are included with the class.

Lawn Equipment Maintenance and Repair - Spring

Dates: April 7 – June 30, Fridays for 12 weeks (No Class on April 14) Times: 8am -11am OR 4pm-7pm Instructor: Mike Daly Spring is here and the harsh winter is just a memory. The trouble your snow blower gave you is not. Here is your opportunity to save big by bringing your equipment to class for tune-ups minor repairs, or complete over hauls. Mowers, tractors, tillers chainsaws, trimmers, blowers and that snow blower you struggled with last winter. A good time to prepare and repair all of these machines.

Crowdfunding Basics (A type of Fundraising)

Dates: March 23, Thursday 1 day class Times: 8am-11am or 4pm-7pm Instructor: Robert Smith Jumpstart the financing of your dreams through crowdfunding. Everyone has heard of Kickstarter and Indiegogo,but what else has come along recently to assist with personal or cause-related start-ups? Given that new crowdfunding sites appear almost every month how can we evaluate then and choose the ones best suited for our projects whether they are films, covering emergency health costs, forming new enterprises or advancing nonprofit ventures? Create a personalized list of the top ten crowdfunding programs currently available to you. This one-day seminar will also help you begin the working of web-delivered messages that will entice investors and caring individuals to assist you with realization of your dreams. Afterwards, you will enjoy access to professional grant writer who can edit your crowdfunding appeals.

46


Money for College

Dates: February 2, Thursday 1 day class Times: 4pm-7pm Instructor: Robert Smith Seeking scholarships for your child or grandchild? This seminar will give you the momentum you need to prepare for success. First the group will hear about the basics of seeking assistance for college, including types of financial help, the typical deadlines and some search strategies for your states’ residents. Second, we will discuss saving for college including the governments opportunities and how to jump smoothly through their hoops. Then we will get online and begin an exploration of what’s currently available to you. Finally, you will have access to the instructors help for six months as you pursue your search for support. An up-to-date hand book and other materials are included in the class. Bring family members, especially students.

Grant Workshop

Dates: March 30-April 27, Thursday 5 weeks Times: 8am-11am or 4pm-7pm Instructor: Robert Smith

Grant workshop is for anyone who wants to learn by doing. You will coauthor one real grant proposal with a veteran grant writer. Together, the specialist and you will select a grant maker to approach with a letter of inquiry, phone call and full proposal. Before the class is over, a grant proposal will be drafted and refined in class and then sent to one or more funding agencies. Your proposal may be submitted electronically, by mail or hand delivered. If you have an idea that may be fundable, find out via this workshop.

Personal Success Pathways

Dates: May 4, Thursday 1 day class Times: 8am-11am or 4pm-7pm Instructor: Robert Smith

Reach your maximum potential in all facets of life by understanding your own abilities. Unfortunately, many of us see our own strengths as unclearly as we our own faults. These blind spots can hold us back more than our faults do. This seminar combines, exploration and discussion of three key concepts: (1) individuals learning styles,(2) the Harvard theory that there are multiple intelligences, and (3) the 34 strengths which Gallup, revealed by conducting ten million surveys. We will focus on your positive traits by engaging each participant in a popular web-based assessment that first appeared in 2007. Learn your top five themes and use then to empower your life. NY Times best-selling book is provided.

47

Career Development Off-Site Custom Classes

Various Locations

YOGA AT TEAM O’CONNOR

Come experience the many benefits of Yoga in a very accessible style that brings strength, flexibility, and peace to the mind, body and spirit. Although no prior Yoga experience is required, this class is also perfect for the more experienced student. This Yoga is for everyone. Yoga mat is included. Spouses are welcome to come with the employee Location: Classes are held at 534 Broadway, Chesterton IN

TAKE ONE OR TAKE THEM ALL!

SESSION #1 (8 weeks)

Dates: Tuesdays session #1: Jan 10—Feb 28 Time: 9am or 6pm Dates: Fridays session #1 Jan 13—Mar 3 Time:3:30-4:30pm Dates: Sundays session #1: Jan 15—Mar 5 Time:2:00-3:00pm


Dates: Tuesdays session #2 Mar 7—April 25 Time:9am or 6pm Dates: Fridays session #2 Mar 10—April 28 Time:3:30-4:30pm Dates: Sundays session #2 Mar 12—April 30 Time:2:00-3:00pm


Dates: Tuesdays session #3 May 2—June 20 Time: 9am or 6pm Dates: Fridays session #3 May 5 —June 23 Time: 3:30-4:30pm Dates: Sundays session #3 May 7—June 25 Time: 2:00-3:00pm

48

INDT 205 Programmable Controllers I

Dates: January 1- April 10 Location: ON-LINE Prerequisite: INDT 113 Basic Electricity Credit Hours: 3 This class introduces the basic theory, operation and programming of programmable logic control-lers. We will demonstrate programming examples, set-up examples and troubleshooting, as well as PLC timing, counting, arithmetic and logic and sequencers.

INDT 206 Programmable Controllers II

Dates: January 16- April 10 Location: ON-LINE Prerequisite: INDT 205 Programmable Controllers I Credit Hours: 3 Serves as a further introduction to the field of industrial controls. Students will learn the principles of control systems and how they are applied to a production system to achieve automation. Sys-tems included in the courses are stepper motors, programmable logic controllers, microprocessors, computers and feedback systems. Emphasis is placed on programmable logic controllers and the local area network.

Career Development ON-LINE Custom Classes

Various Locations

49

Career Development Off-Site Custom Classes

Various Locations

FAA Part 141 Sport/Private Pilot Ground School

Dates: January 11 to March 1, Monday AND Wednesday for 8 weeks (no Class 1/16) Times: 6 pm - 8pm *****Make-up class sessions available for shift workers***** Location: Eagle Aircraft, 4001 Murvihill Road, Valparaiso Instructors: Michael Thomas Students will be issued a Cessna Pilot Kit to be used in conjunction with the class sessions. Stu-dents will have a lab to complete at home before attending the class sessions. The instructor will lead a group discussion using Power Point visuals and class lecture. The goal of this class is to give the students a general overview of aviation technology and terms so that the student will be able to pass the Private Pilot FAA Written Knowledge test. Students will take a practice test at the end of the course and then take the written test at Eagle Aircraft (by appointment). No prerequisite is re-quired for this course.

FAA Approved Instrument Ground School Course Dates: January 19 to March 23, Thursdays for 10 weeks Times: 6 pm - 8 pm Location: Eagle Aircraft, 4001 Murvihill Road, Valparaiso Instructors: Scott Ferguson and Michael Thomas

The Instrument Ground School is for the students who have a Private Pilot License and wish to move to the next step. Instrument Ground School prepares a student for flying in inclement weather so the student isn’t forced to land and wait for good weather before completing the trip. The goal of the class is to provide the student with a basic knowledge of instrument flight regulations and procedures. Student will receive operational knowledge of all rules and regulations pertaining to instrument flight. Student will gain knowledge of collecting and interpreting weather data and applying to make pilot in command decisions during flights under IFR conditions. Student will gain a working knowledge of various forms of navigations including GPS, VOR and ADF systems. Student will be prepared to pass an FAA Knowledge Test for an IFR rating.

50

INDT 102 Introduction to Print Reading Dates: January 16-May 8, Mondays 16 weeks Times: 9am-1pm OR 3:30pm-7:30pm Prerequisites: Demonstrated competency through appropriate assessment or earning a grade of “C” or better in MATH 015 Fundamentals of Algebra I This course provides an introduction to reading and interpreting machine shop symbols, welding blueprints and working drawings used in trades and crafts. It focuses on dimension, shape, fabri-cation and assembly. This class also applies basic mathematics to the solution of print and perfor-mance problems. This class is 3 credit hours.

HVAC 100 Introduction to HVAC Technology Dates: January 20 - May 12, Fridays for 16 weeks Times: 7:30-11:30am or 11:30-3:30pm or 3:30-7:30pm Instructor: Joe Thomas

This course covers many of the topics needed for students to be successful in the mechanical con-struction industry. Its modules include: History of the HVAC industry, OSHA 10-Hour construction industry training, communication and customer service skills, and an introduction to blueprints and other types of mechanical drawings.

Designing A Cocktail Party

Dates: May 1—June 5, Mondays Times: 9-11:30am OR 5-7:30pm Instructor: Brad Hindsley Students will get to experience the hands-on approach to developing their own cocktail party. We will start with developing a theme for the party and building everything around the central concept. This will include the décor and room set-up, invitations, and entertainment. Student will work the Chef to design an hors d’oeuvres menu that can be placed on a buffet or passed to the guests. These recipes will be tested and perfected by students. The students will also have the opportuni-ty to design a signature cocktail that fits the theme of the party. At the end of the class, each stu-dent will be allowed to invite up to 2 guests to the cocktail party that they have designed through-out the class. Recipes and a chef jacket/hat will be provided.

Career Development Arcelor/Mittal Burns Harbor

1275 1/2 McCool Road - Burns Harbor, IN

51

Cooking 101

Dates: January 23—February 27, Mondays Times: 9-11:30am OR 5-7:30pm Instructor: Brad Hindsley

Cooking skills for the Non-Professional” will create opportunities for the students to better under-stand basic cooking techniques. We will touch on soups and salads, fish, poultry, meats and side preparations. At the end of the class, the students will have a basic knowledge of developing reci-pes and menus, protein and product fabrication and dessert making. The goal of the class is to instruct students on creating healthy menus for them and their famines to enjoy.

Heating & Air Conditioning

The current class is full, but more will be coming! Call Career Development for dates. Do you want to earn more $$$, learn a new trade? The HVAC industry is the place to do it! With this knowledge you will be a VERY valuable asset to all of your family, friends, and neighbors. You will have the ability to earn up to 8 Nationally recognized Certifications! With knowledge and training you will become a HVAC Certified Technician. You will have the ability to Install, Repair, and Ser-vice HVAC equipment in the Residential & Light Commercial fields. The HVAC program meets one day a week for 64 weeks. Do not miss out on this Incredible opportunity for unlimited earning po-tential! The Following Certifications are available:

Type I,II, III Certifications for Air Conditioning & Refrigeration (Gov. Required)

Electrical Certification for Heating and Air Conditioning

Nationally recognized certifications for furnaces and air conditioners (from the Air Condi-tioning, Heating and Refrigeration Institute)

R-410A Certification (for new air conditioners)

Fiberboard Duct Design and Fabrication Certification

Gastite Piping Certification (CSST Gas Line)

Outdoor Art With Succulent Plants

Dates: May 15 - June 5, Mondays for 3 weeks Times: 8-Noon or 1-5pm Instructor: Kim Riley

Succulent Plants are very popular because they are so easy to care for. The vari-eties are endless. They range from blue to orange and make beautiful arrange-ments in almost any container. In class you will learn how to use large leaves to cast your own container out of cement. We will also be making hypertufa contain-ers out of a blend of peat, vermiculite and cement to create some very interesting containers for your succulents. You will learn how to grow your own plants from cuttings. By the end of the session you will have a variety of your own to start your own garden. We will be designing a living wreath made out of moss using your succulents for a beautiful addition to your garden. Come see why these little guys are gaining so much popularity.

Career Development Arcelor/Mittal Burns Harbor

1275 1/2 McCool Road - Burns Harbor, IN

52

You may attend any of the following scuba sites for accredited scuba courses

Goose’s Scuba Shack 1490 US Route 30, Dyer, IN

219-322-7222

Diver’s Lair 4405 N Calumet Avenue, Valparaiso, IN

219-465-3483

Lake County Divers 305 Main Street, Hobart, IN

219-942-0016

Contact the school to get their schedule and then call your Career Development office

Scuba Classes

53

On –Line Opportunities

NetTutor.com WHERE STUDENTS GET THE HELP THEY NEED

Expert tutors are waiting to help you in the following subject areas:

MyAcademicWorkshop (MAW)

MyAcademicWorkshop is a new and unique online math assessment, homework, and placement program customized for adult workers. This program is one of the most advanced educational tools available for learning mathematics in a familiar, learning management environment. Loaded with over 7,000 questions, MyAcademic Workshop contains math content beginning with Basic Math. Students like My Academic Workshop because it shows you how to do the problems by following step by step instruction, gives you the opportunity to try again with a similar problem, and ultimately better prepares you to get better grades on assignments or exams.

Contact Your Career Development Office to Sign Up!

MTM AND MTE -Mechanical and Electrical Classes

Internet web-based training offered by Dupont E-Learning (formerly Costal Online Training)

for Mechanical, Electrical, and Systems Repair modules including Instrument Repair/Process Control Training

Position yourself to successfully pass an M.T.M. or M.T.E. learner test Train on-line to strengthen your maintenance knowledge and skill level

Mathematics Accounting Finance English Composition Chemistry Biology Math en Español Information Technology Allied Health Foreign Language Physics Economics

NetTutor makes it easy to get help with a live tutor anytime. To sign-up for NetTutor call your Career Development

54

LEARNING CENTER LOCATIONS

Leon Lynch Learning Center 1410 Broadway Ave

East Chicago, Indiana

US Steel - Gary Works 1221 E. Ridge Road

Gary, Indiana

US Steel - Midwest Career Development 1919 Willowcreek Road

Portage, Indiana

USW/MITTAL-Burns Harbor 1275 ½ McCool Road Burns Harbor, Indiana

McBride Hall - Local Union 1014 1301 Texas Street

Gary, Indiana

Bernard Kleiman JobLink Learning Center 3333 N Michigan

East Chicago, Indiana

55

Career Development Class REGISTRATION FORM 2017

Name:

Address: City: State: Zip: Badge #: Plant WORK Location ? Gary Midwest Home Phone: Plant Extension: Union Local #: Do you work SHIFTS ? YES NO 12 Hours ? YES NO I wish to enroll in the following class:

Name of Class:

Location of Class:

Class Time: I wish to enroll in the following class:

Name of Class:

Location of Class:

Class Time: I wish to enroll in the following class:

Name of Class:

Location of Class:

Class Time:

USS Midwest & Gary Works PRESORT STD

Career Development Program U S Postage Paid

1919 Willowcreek Road Gary, IN

Portage, IN 46368 Permit # 104

Current Resident Or

Mark Your Calendar NOW!!!

USS Midwest Career Development

Open House

Thursday, June 29th

career development course catalog w / s 2017 j -...

Documents