carlisle ft training programme 2017 · training programme 2017 special requirements of course, it...

Training Programme 2017

Training

Carlisle FT

Programme

2017


A Vital RoleIn most manufacturing industries, spraying is still a labour intensive job and depends totally on the experience and care of the operator. In the wrong hands a spray gun can be very inefficient, producing a poor finish, creating a high percentage of costly rejects and wasting increasingly expensive paints and coatings.

Training has a vital role to play in any trade or profession and the skill of spray finishing is a prime example where a small investment can provide significant rewards in the overall efficiency of a paint shop or body shop.

Structured CoursesCarlisle Fluid Technologies UK have a long and successful track record in training at all levels and the Centre offers four standard courses structured to meet the requirements of operators, supervisory staff and management

Under the guidance of our full time Technical Support and Training personnel, the courses concentrate on spray gun handling, techniques, maintenance and fault finding to provide a valuable complement to the courses on paint and materials organised by the coatings manufacturers.

Emphasis is placed on practical experience and hands-on use of the equipment in order to instil as much spraying confidence and basic knowledge to the trainee as is possible in the time available.


Special RequirementsOf course, it is possible that you want something slightly different and not met by the standard sessions. If this is the case then please talk to us. It is possible for us to formulate specialised training sessions just for you. The range of subjects and equipment that can be covered include the following:

Continual reference is made to paints and coating materials. It is not our specialised subject, but we can point you in the direction of our Coatings Manufacturing colleagues, with whom we closely work. Although not normally carried out in our standard courses, it is possible on special occasions for us to have ‘guest’ speakers from any of the material manufacturers, to add their knowledge of their products.

Likewise we are willing to work with manufacturers of complementary equipment so that we may provide a complete training package. Get in touch with us to check the current prices for special sessions held in the Training school. Involvement of other non-Carlisle Fluid Technologies personnel may involve additional charges. Contact us for more details and to discuss your particular requirements

Training at your PremisesIf it is difficult for you to come to us then we can come to you! We can train, at your premises, with similar sessions to those already mentioned above. Of course, as you will appreciate, it is not so easy to cover such a wide range of equipment on site as we will not have our normal facilities or equipment store on hand, and hence, if at all possible, we prefer to do training courses at Bournemouth. We charge a rate per day plus mileage and expenses. Telephone, Fax or email us with your details and to find out our current charges.

Air Assisted AirlessAirless

Automatic Spray EquipmentCompressed Air

EPAHealth and Safety in the Spray

Shop

Air Atomised Spray EquipmentAir Management EquipmentBreathing EquipmentCOSHHFluid Feed and PumpsLiquid ElectrostaticLow Pressure Spray EquipmentSpraying Techniques


Who do we train?The attendees to our courses come from all aspects of the finishing industry and we have regular visits from the following sectors:

Adhesives and bonding

Armament & Munitions

Bathroom & Kitchen

suppliers

Bus & Transport

Ceramics

Electrical & Electronics

Heating & Pumping

HM Prisons

Lighting & Electrics

Marine & Shipbuilders

Royal Air Force

Painting & Decorating

Railway & Underground

Universities & Colleges

Aerospace

Automotive Manufacturing

British Army

Car & Motorcycle restoration

Civil Airlines

Food Processing

Housing & Construction

Leather Processing

Locks & Security

Royal Navy

Paint and Materials manufacturers

Plastics coating & Manufacturing

Toys and Games

Wood and Furniture Manufacturing

as well as Private Individuals


5 DAY AIR ATOMISING COURSE


Day 1

• Compressed Air Supply - Control and Treatment

• Masks and Respiratory Protection• Conventional Air Atomisation Theory• Suction and Gravity Feed systems• Health & Safety in the Spray shop

Day 2

• Conventional Air Atomising Gun Strip-down

• Gun Troubleshooting & Maintenance• Spray technique Theory• Getting used to Suction & Gravity guns*• Paints and sprayed materials - a

background• Preparation of Test pieces and Panels• Using Conventional Suction & Gravity

Guns on • Test pieces and Panels*

Day 3

• Introduction to Pressure feed systems• Construction, working and set-up of

Pressure feed systems• Preparation of Test pieces and Panels• Using Pressure feed Conventional Guns

on Test pieces and Panels*

Day 4

• The Development of HVLP equipment• What’s the difference between

Conventional, HVLP and Trans Tech equipment?

• Preparation of Test pieces and Panels• Using HVLP & Compliant Suction,

Gravity & Pressure feed Spray Guns on Test pieces and Panels*

Day 5

• Examination of Painted panels and test pieces

• Housekeeping and Clean-up• Manufacturing Facility Tour• Quick Questionnaire• Any other questions?• Depart after Lunch

Notes:* Indicates practical work carried out in the spray boothDetailed maintenance training is not carried out during this course. Specific training would need to be arranged.Price includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by trainee.Carlisle Fluid Technologies reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in-depth troubleshooting and material trials. Separate arrangements will need to be made.

5 Day Air Atomisation Course Basic Agenda

Duration:Monday to Thursday 09.30 to 16.30Friday 09.30 to 12.45

Course Dates:Monday 12th to Friday 16th June 2017

Price:£900.00 + VAT

Location:Carlisle Fluid Technologies Training Centre Bournemouth

Aimed At:Novice sprayers and management new to spraying or wanting to improve their knowledge of correct practice in the spray shop


2 DAY AIR ATOMISING COURSE


Day 1

AM:• Compressed Air Supply - Important facts• Air Atomisation Theory• Suction and Gravity Spray guns• Key Spray Gun Components• What the difference between

Conventional, HVLP and Compliant equipment?

• Preparation of Test pieces and Panels• Break for Lunch

PM:• Tips on Gun Application Technique

*Getting the most from your 'Cup' gun*Practical Spraying with Compliant 'Cup' Guns

Day 2

AM:• Pressure Feed tanks - an introduction • Construction & working of Pressure

Feed Tanks• A brief mention of Diaphragm Pumps• Preparation of Test pieces and Panels

Break for Lunch

PM:

*Getting the most from your 'Pressure' gun

*Practical Spraying with Pressure Feed systems

Gun Cleaning, Troubleshooting & Maintenance

Any other questions?

Notes:* Indicates practical work carried out in the spray boothDetailed maintenance training is not carried out during this course. Specific training would need to be arrangedPrice includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by traineeCarlisle Fluid Technologies UK reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in-depth troubleshooting and material trials. Separate arrangements will need to be made.

Two Day Air Atomisation Course Basic Agenda

Duration:Day 1 09.30 to 17.00Day 2 09.30 to 16.00

Course Dates:Tuesday 24th to Wednesday 25th January 2017Tuesday 24th to Wednesday 25th October 2017


Location:Carlisle Fluid Technologies Training Centre, Bournemouth

Aimed At:Novice sprayers and management new to spraying or wanting to improve their knowledge of correct practice with Air atomising Equipment


TWO DAY HIGH PRESSURE EQUIPMENT COURSE


Day 1

AM:High Pressure Pump Construction and Working

• Airless Atomisation• Gun and Tip Construction• 'Fingers' and 'Tails'• Transfer Efficiency• Airless pros and cons• Common Airless Problems

Break for Lunch

PM:• Setting up the equipment*• Modified Spray technique*• Practical spraying with Airless*• Cleaning out the Equipment*

Day 2

AM:Airless vs. Air Assisted Airless Pumps

• Air Assisted Airless Atomisation• Gun and Tip Construction• 'Fingers' and 'Tails'• Transfer Efficiency• Airless pros and cons• Common Airless Problems

Break for Lunch

PM:• Setting up the equipment*• Modified Spray technique*• Practical spraying with Airless*• Cleaning out the Equipment*• Cleaning out the Equipment*

Airless vs. AAA - Recap

Duration: Price:Day 1 09.30 to 17.00 £500.00 + VATDay 2 09.30 to 16.00

Location: Carlisle Fluid Technologies Training Centre Bournemouth

Course Dates:Tuesday 28th to Wednesday 29th March 2017 Aimed At:Tuesday 25th to Wednesday 26th July 2017 Newcomers to High Pressure

equipment (particularly Air Assisted Airless) and its capabilities

Notes:* Indicates practical work carried out in the spray boothDetailed maintenance training is not carried out during this course. Specific training would need to be arrangedPrice includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by traineeCarlisle Fluid Technologies UK reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in‐depth troubleshooting and material trials. Separate arrangements will need to be made.

Two Day High Pressure Course Basic Agenda


TWO DAY ELECTROSTATIC EQUIPMENT COURSE


Day 1

AM:Electrostatic Systems Construction and Working

• System Types• How it works• Safety considerations• Gun and Tip Construction• Transfer Efficiency• Pros and cons• Common Problems

Break for Lunch

PM:• Setting up the equipment*• Modified Spray technique*• Practical spraying with Electrostatics*• Cleaning out the Equipment*

Day 2

AM:Practical Electrostatic setup & Spraying

• Electrostatic Safety considerations

• Air and Fluid Feed systems• Pressure Feed Tank intro• Diaphragm Pump intro

Break for Lunch

PM:• Setting up the equipment*• Modified Spray technique*• Practical spraying with Electrostatic*• Cleaning out the Equipment*

Duration: Price:Day 1 09.30 to 17.00 £500.00 + VATDay 2 09.30 to 16.00


Course Dates:Tuesday 25th to Wednesday 26th April 2017 Aimed At NewcomersTuesday 26th to Wednesday 27th September 2017

Notes:* Indicates practical work carried out in the spray boothDetailed maintenance training is not carried out during this course. Specific training would need to be arrangedPrice includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by traineeCarlisle Fluid Technologies UK reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in‐depth troubleshooting and material trials. Separate arrangements will need to be made.

Two Day Electrostatic Course Basic Agenda


ONE DAY ELECTROSTATIC EQUIPMENT MAINTENANCE COURSE


Day 1

AM:Electrostatic Systems Construction and Working

• System Types• How it works• Safety considerations• Gun and Tip Construction• Common Problems• Gun Disassembly and Rebuild• Technical Bulletin use

Break for Lunch

PM:• Setting up the equipment*• Modified Spray technique*• Practical spraying with Electrostatics*• Cleaning out the Equipment*

Duration: Price:Day 1 09.30 to 17.00 £300.00 + VAT


Course Dates:Tuesday 7th February 2017 Aimed AtTuesday 9th May 2017 Newcomers Tuesday 14th November 2017

Notes:* Indicates practical work carried out in the spray boothPrice includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by traineeCarlisle Fluid Technologies UK reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in‐depth troubleshooting and material trials. Separate arrangements will need to be made.

One Day Electrostatic Maintenance Course Basic Agenda


1 DAY AIR ATOMISING GUN MAINTENANCE COURSE


Day 1

AM:• Compressed Air Supply - Important facts• Air Atomisation Theory• Suction and Gravity Spray guns• Key Spray Gun Components• Gun disassembly and assessment exercise• Technical bulletin use• Break for Lunch

PM:• Gun Assembly• Gun Setup and check• Practical Spray exercise

*Gun setup and test*Practical Spraying with Compliant Guns

Notes:* Indicates practical work carried out in the spray boothPrice includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by traineeCarlisle Fluid Technologies UK reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in-depth troubleshooting and material trials. Separate arrangements will need to be made.

One Day Air Atomisation Gun Maintenance Course Basic Agenda

Duration:Day 1 09.30 to 17.00

Course Dates:Tuesday 21st February 2017Tuesday 23rd May 2017Tuesday 12th September 2017Tuesday 18th November 2017


Location:Carlisle Fluid Technologies Training Centre Bournemouth

Aimed At:Novice sprayers and management new to spraying or wanting to improve their knowledge of correct maintenance practice with Air atomising Equipment


ONE DAY HIGH PRESSURE EQUIPMENT MAINTENANCE COURSE


Day 1

AM:High Pressure Pump & Gun Construction and Working

• Gun and Tip Disassembly• High Pressure Pump Theory & disassembly• Common Airless Problems• Selecting Spares

Break for Lunch

PM:• Gun and Pump Assembly• Pre-start procedures and checks*• Pump Operation*• Practical Spray test exercise*• Cleaning out the Equipment*

Duration: Price:Day 1 09.30 to 17.00 £300.00 + VAT


Course Dates:Tuesday 14th February 2017 Aimed At:Tuesday 16th May 2017Tuesday 21st November 2017 Newcomers to High Pressure

equipment (particularly Air Assisted Airless) and its capabilities

Notes:* Indicates practical work carried out in the spray boothPrice includes all refreshments while on site and a cold buffet lunchAll travel and Hotel Accommodation to be arranged by traineeCarlisle Fluid Technologies UK reserve the rights to cancel any training session should bookings be less than 3 trainees. All trainees will be informed of the cancellation 2 weeks prior to the date of training session.Discussion of Customer application problems where applicable will be included but time does not allow for in‐depth troubleshooting and material trials. Separate arrangements will need to be made.

One Day High Pressure Maintenance Course Basic Agenda


Course Application FormCompany Name:

........................................................................................................................................

Postal Address:

..........................................................................................................................................

.........................................................................................................................................

.........................................................................................................................................

Telephone No: ....................................... Fax No: .................................................

Delegates Name:....................................................................

Position/Job Title:........................................................................

Please give brief details of the delegate's background and their current responsibility.

...........................................................................................................................................

...........................................................................................................................................

...........................................................................................................................................

...........................................................................................................................................

Course and Dates Selected: .......................................................

Course Fee: 1 Week course1 Day Course £ 300.002 Day course

* Breathing Air Kit @ £250.00 each

Sub Total

VAT @ 20%

Cheque enclosed for Total of

Free equipment required* DeVilbiss Advance HD Gravity * DeVilbiss Advance HD Pressure* DeVilbiss Breathing Air Kit

Signed: ............................................... Position Held: ......................................................

Date: .................................................. Email:. ........................................................

* See Equipment Offers. Make all Cheques Payable to : Carlisle Fluid Technologies UK

£ 900.00

£ 500.00-------------------£ .00

£ :00

£ :-------------------£ :

£ FREE£ FREE£ FREE

(Delete where applicable)

Please specify which free product you require – one only – for 2 and 5 day courses only


Questionnaire Please fill in this Questionnaire to enable us to know what you do in your particular field of Spray Finishing.

Production ProcessTypes of Product being Sprayed?.

.....................................................................................................................................

....................................................................................................................................

Types of Coating being applied?.

...................................................................................................................................

...................................................................................................................................

Conveyorised System? YES NO

Hand Spray or Automatic? HAND AUTO

Equipment Used Please specify the spray equipment makes and models in use:

Conventional Air Atomisation(Pressure, Gravity or Suction Feed?) ..............................................................................

HVLP / Low Pressure ............................................................

Airless:...................................................................

Air Assisted Airless: ........................................................

Electrostatic: ........................................................................

Fluid Feed Method (Pressure Feed Tanks, Fluid Pumps, Circulating System etc.)

........................................................................................

Where did you hear about this course: .........................

Distributor/Paint Company who recommended the course: .........................

Please complete a separate form for each applicant and return to:

Julie Kirby at: Carlisle Fluid Technologies UKRingwood Road, Bournemouth, Dorset. BH11 9LH


Special Offers

All attendees on our 2 and 5 day 2017 courses held in Bournemouth have the opportunity to receive either a free DeVilbiss Advanced HD Spray Gun (Pressure or Gravity complete with 510 air cap and 1.4 tip) or a DeVilbiss Pro Visor Kit.

During the practical sessions of our equipment courses, in order to conform to Safety regulations, students will be required to have Air-Fed masks available for use. While there are spare masks available for the trainees to use, should you like to purchase one for your own personal use if not already selected as your free product, then you may like to take advantage of the special price we offer to students of £250.00+VAT. The complete Breathing Air Kit available comprises a Full face Visor, Belt, Regulator and Cartridge Filter and the Airline from the Belt unit to the Spray Gun.

Likewise, whilst on the training course, trainees may like to take advantage of purchasing spray guns and other equipment at special discount prices. This offer is only open to private purchases (no bulk company orders please) and payment must be made by cheque. This offer only applies for the duration of the specific course attended.

In Conclusion

We have the ability and experience to carry out the training you need. Pick up the telephone, send a fax or write an e-mail and talk to us. Alternatively send us the idea of any special requirements you have, and we will contact you.

We look forward to meeting you.


PaymentPayment should be by Company or personal cheque made payable to Carlisle Fluid Technologies UK, and should be enclosed with the application form (unless you hold a current direct account with us). A place will then be reserved for you on the required course.

Please note that provisionally booked places will only be held until 14 days before the commencement of the course. After that date places will be reserved on a first come first serve basis, on receipt of remittance. We will invoice you immediately on receipt of your cheque. The fee includes lunches and refreshments during the course, but transport to and from the Training Centre and overnight accommodation will need to be arranged by the trainee and/or their employer unless previously arranged. We also reserve the right to cancel courses if less than 3 people are booked on them. Should this be necessary, we will let booked attendees know of cancellation at least one working week prior to the scheduled start date

Dress Code

Whilst we do provide overalls for you to wear during the course, we recommend that you wear clothes that you do not mind getting paint on as a precaution. We also recommend the wearing of safety shoes whilst on our premises.


Delegate Terms & Conditions:

Payment

The course fee must be paid, in full, no later than 4 weeks prior to the start of the course. Carlisle Fluid Technologies reserves the right to re-allocate the course place to another delegate if fees are not paid in time.

Cancellation or Postponements:

If the client wishes to postpone or cancel a course, the following cancellation fees will be charged:

Between 2 and 4 weeks 50% of course feesLess than 2 weeks 100% of course fees

Delegates attending any part of a course will be charged the full amount. No refund can be issued where clients leave the course early.

A supplementary fee invoice will be issued for cancellation and/or transfer fees and payment is due within 14 days of that invoice.

Changing delegate details:

There will be no charge if a substitute person wishes to replace the original delegate. Please inform our office of any change to the original booking.

Cancellation of course by Carlisle Fluid Technologies and changes to course content:

Carlisle Fluid Technologies courses are constantly updated and improved and Carlisle Fluid Technologies reserves the right to alter course content.

Carlisle Fluid Technologies reserves the right to cancel a course at any time without liability. In these circumstances, delegates will be offered an alternative date or credit note.


Carlisle Fluid Technologies UKRingwood RoadBournemouth

BH11 9LH

Telephone: +44 (0) 1202 571111Fax: +44 (0) 1202 573488

[email protected]

JANUARY FEBRUARY

M T W T F S S M T W T F S S

1 1 2 3 4 5

2 3 4 5 6 7 8 6 7 8 9 10 11 12

9 10 11 12 13 14 15 13 14 15 16 17 18 19

16 17 18 19 20 21 22 20 21 22 23 24 25 26

23 24 25 26 27 28 29 27 28

30 31

MARCH

M T W T F S S

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30 31

MAY JUNE

M T W T F S S M T W T F S S

1 2 3 4 5 6 7 1 2 3 4

8 9 10 11 12 13 14 5 6 7 8 9 10 11

15 16 17 18 19 20 21 12 13 14 15 16 17 18

22 23 24 25 26 27 28 19 20 21 22 23 24 25

29 30 31 26 27 28 29 30

JULY AUGUSTM T W T F S S M T W T F S S

1 2 1 2 3 4 5 6

3 4 5 6 7 8 9 7 8 9 10 11 12 13

10 11 12 13 14 15 16 14 15 16 17 18 19 20

17 18 19 20 21 22 23 21 22 23 24 25 26 27

24 25 26 27 28 29 30 28 29 30 31

SEPTEMBERM T W T F S S

1 2 3

4 5 6 7 8 9 10

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30

OCTOBER

M T W T F S S

1

2 3 4 5 6 7 8

9 10 11 12 13 14 15

16 17 18 19 20 21 22

23 24 25 26 27 28 29

30 31

NOVEMBER DECEMBERM T W T F S S M T W T F S S

1 2 3 4 5 1 2 3

6 7 8 9 10 11 12 4 5 6 7 8 9 10

13 14 15 16 17 18 19 11 12 13 14 15 16 17

20 21 22 23 24 25 26 18 19 20 21 22 23 24

27 28 29 30 25 26 27 28 29 30 31

APRILM T W T F S S

1 2

3 4 5 6 7 8 9

10 11 12 13 14 15 16

17 18 19 20 21 22 23

24 25 26 27 28 29 30

No in 2017 Course Description

Duration (Days) Cost per person

2 Conventional Spray Master 2 £500

4 Conventional Tech Master 1 £300

2 AAA Spray Master 2 £500

3 AAA Tech Master 1 £300

2 Electrostatic Spray Master 2 £500

3 Electrostatic Tech Master 1 £300

1 Spraying Master 5 £900

17

carlisle ft training programme 2017 · training programme 2017 special requirements of course, it...

Documents