Part A

Part G (4 pieces)

Snowy mountainPart H (2 pieces) Part I (2 pieces) Part J (2 pieces)

Part B Part C Part D Part E Part F

Cut out the parts and fold them along the fold lines on each.

PAGE01

Slot parts A and B together at slot No. 1.

Slot part C onto the part you made in step 2, at slot No. 2.

Slot part D onto the part you made in step 3, at slot No. 3.

Pop-up Card(Snowman): Assembly Instructions

PAGE02

Slot part F onto the part you made in step 5, at slots No. 9, 10, 11, 12 and 13.

Slot part E onto the part you made in step 4, at slots No. 4, 5, 6, 7 and 8.

Slot part G onto the part you made in step 6, at slots No. 14, 15 and 16.

Slot part H onto the part you made in step 7, at slots No. 17, 18 and 19.

Slot part I onto the part you made in step 8, at slots No. 20, 21 and 22.

Attach part J to the lower glue tab on step 9 by gluing it from behind.

Pop-up Card(Snowman): Assembly Instructions

Assemble the pom-pom by slotting together.

Glue the part made in 2 to the top of the hat.

Attach the lower glue tabs to the inside of the top of parts C and E.

PAGE03

Attach together at the hat's glue tabs.

Use a cylindrical rod to curl the scarf and make it flexible.

Wrap it around the snowman's neck, using the slot to cross it at the front.*The cross-over point must actually be exactly in the middle, whether at the front or the back.

Fold the ends of the scarf along the fold line, and glue to the back.

Decorate the snowman to your liking.

Pop-up Card(Snowman): Assembly Instructions

PAGE04

Add decorations to the card as you wish.

16 is the completed card when the cover is stuck on to the other half side.

Stick on a colored paper cover onto half of the rear side of the base paper. Be careful to stick in on in the right direction.

Glue the snowy mountain to the glue spot on the base paper.

Attach the base together at the glue tab.

Insert the snowman's lower glue tabs into the slot and glue them to the underside of the base paper.

Pop-up Card(Snowman): Assembly Instructions