CASE STUDIES OF SUCCESSFUL ENTREPRENEURS TRAINED UNDER

“SCHEME FOR ASSISTANCE TO TRAINING INSTITUTIONS” (ATI)

Sponsored by

Ministry of MSME

Govt. of India, New Delhi

Jointly published by

National Institute of Micro, Small and Medium Enterprises (ni-msme)

An Organization of the Ministry of MSME, Government of India, Hyderabad

Central Institute of Plastics Engineering & Technology (CIPET)

Department of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India IDA, Phase II, Cherlapally, Hyderabad – 500 051

CASE STUDIES OF SUCCESSFUL

ENTREPRENEURS TRAINED UNDER

ATI SCHEME OF

MINISTRY OF MSME, GOVERNMENT OF INDIA

Edited &

Compiled by:

Shri V Kiran Kumar Chief Manager (Project) & Head

CIPET-HYDERABAD +91-9959333415 040-27263750,

July 2015

Foreword

Creating an environment for a strong culture of entrepreneurship is a key for economic development of

the country. It is heartening to mention that India has been growing at a relatively high rate in the last

few years, and is likely to be the largest economy in the world by 2050. Fortunately, India is a young

country with about 63 percent population currently being in the working age group of 15 to 59 years

and it is pertinent to mention that improved training and skill development is critical for providing wage

employment or self-employment. The Ministry of MSME has been implementing skill training through

National Institute for Micro, Small and Medium Enterprises (ni-msme)to help and assist potential

people to become entrepreneurs or secure wage employment under the “Scheme of Assistance to

Training Institutes” since 2009-10 onwards. We gratefully acknowledge the support of the Ministry in

conducting the programmes.

It has been a journey of full of challenges. In general, most of youth are interested to go for wage

employment as most of them are not aware of the policies and schemes of the Ministry. They are also

not equipped with necessary skills to venture into business or secure wage employment. Therefore,

there was a need for programme on entrepreneurship and skill development with practical learning. ni-

msme has been privileged to be a part of this noble initiative through scheme of Assistance to Training

Institutes since inception. ni-msme has been Implementing the scheme in Southern India through

various esteemed partner Institutions. We are putting our best efforts to impart effective training,

monitoring and follow up. The efforts of ni-msme and its partner Institutions is resulting in to success

of our trainees. ni-msme has already brought one volume of success stories.

Moving forward, ni-msme would like to bring out few more success stories to present a glance of the

joint efforts of ni-msme & its Partner Institutions in nurturing entrepreneurship and enterprises in

many locations of few States. The credits of this success goes to collective efforts of Ministry of MSME,

ni-msme family & its Partner Institutions and our trainees for their efforts in learning, enhancing their

skills and endeavor to start their business.

These cases will continue to inspire various stakeholders as well as the future generation of

Trainees. In this context, we would like to thank the Heads of partner Institutions, Programme

coordinators and ni-msme Faculty members for their commitment and effective implementation of the

scheme for empowering the youth through necessary skills for self and wage employment.

Expecting many more such volumes from Partner Institutions in near future ……

M. Chandrasekhar Reddy

Director General

a

Success Story-1

Manasa Madasu is an Engineering graduate in the branch of Bio-Technology, PGDBM in Bio

Informatics at Osmania University, PGBM at HLU. Her Father is a Retired Sr. Manager from

BHEL, Hyderabad and mother is a Business women. Seeing the family in Business from her

childhood, she always had an ease in Business. The chosen industry was established for the

improvement of the importance of Bio Medical Engg. In India. The Hospital management

awareness is very much in need to every individual but bio medical is the source to start up.

As the basic bio products are through Disposals in Plastics.

She approached with the idea to MSME balanagar. The officials there have referred her

to Mr. Sai Surendra from CIPET for future industry & Technology ideas.

MED AVIO POLYMERS:

The Initiative to start the Industry is with the involvement in many live projects works in

college & with family support. She was identified for the EDP Programme sponsored by

ni-msme. She has completed the training and learnt about the Plastics Technology to start

up the Bio medical products in Plastics. She has availed a bank loan of Rs. 40 lakhs through

State Bank of Hyderabad, BHEL branch. The unit was set up at:

M/s Med Avio Polymers,

165/E, IDA, Phase-II, Cherlapally, Hyderabad-51

Mob: 9912855185

Email: Manasa.medavio@gmail.com

SUCCESS STORIES-2

V corps Poly Engineers are set up by Mr L Vinay Kumar is an B Tech Engineering graduate

who hails from Mahaboobnagar. As his father Mr Gopal Kishan Rao and mother was a

house wife and was settled in Hyderabad from past 25 years in Business, he has completed

his graduation from JNTU, Hyderabad. He has also completed his M tech from University of

Mysore while he has started his business plans.

While he was trying his business plans, he has joined in a job named German Esher

Lyods as a Quality control engineer for their third party testing requirements. As he was

planning for his business plans, he has returned back to Hyderabad to start up his own unit.

V Corps Poly Engineers

He has seen an Advertisement of CIPET-NI MSME training programme and applied for the

training programme. He was trained in Plastics Technology majorly for setting up a film unit

for manufacturing Packaging films, Mulch Films, 40 Micron carry bags etc. and Epoxy

polymer coating for flooring. He has started his unit at :

M/s V Corps Poly Engineers,

Plot no 32, Shed no D, Phase-IV,

IDA, Cherlapally, Hyderabad-51

Mob: 9848353554

Email: vcorpsengineers@gmail.com

SUCCESS STORIES-3

Mr P Anil Kumar is a native of Narsaraopet, Guntur Dist. Andhra Pradesh. He hails from an

Agricultural family and mother is a home maker. His father is a govt. employee and his

mother has encouraged him to become an Entrepreneur. Mr Anil Kumar has completed his

degree in Engineering and later completed his Master of Technology (M Tech) as he was

very much interested in Entrepreneurship.

He has identified the prosperity of business in Plastics and approached CIPET when he

has seen the advt. of CIPET – NIMSME. CIPET has suggested him to get trained initially and

then later to start the unit. He has joined in the training programme and successfully

completed the programme. Within the programme he has identified the products he has to

make and started the unit with his own capital at Guntur industrial estate.

He has started the plastics injection moulding machine for manufacturing different types of

caps like: bottle caps, bubble top (20 lts caps) caps etc. The unit was started in Guntur Dist.

M/s S S Plastics Industries,

Lingamguntla, Narsaraopet,

Guntur Dist.

Success Stories-4

Mr Vishnu Vardhan Reddy is a native of Turkapally, R R Dist. Andhra Pradesh. He hails from

an agricultural family from a small village. His father is a farmer growing paddy and mother is

a home maker. From his childhood he was interested in Entrepreneurship and always

dreamt of it.

Mr Vishnu Vardhan Reddy has completed his graduation and was into agriculture and

Poultry farms growing chicken. Mrs M Ratna, partner was a home maker and has an

interest in Entrepreneurship and wanted to be a role model in her family. Mrs M Ratna has

completed her graduation and was waiting for the opportunity. Her husband was already in

granite business and was interested in helping

and support her in her venture of her like.

R V INDUSTRIES

Sri Vishnu Vardhan Reddy & Mrs M Ratna has an interest in setting up a

manufacturing unit in Partnership. In this context, he has seen an advertisement of CIPET in

the local newspaper and attended the ESDP training & has successfully completed the

training. Sri Vishnu Vardhan Reddy & Mrs M Ratna has attended the ni-msme ESDP

programme on “Programming & Operation for CNC Machines” from 23.01.2012 to

17.02.2012.

In the month of June 2012, he has availed the loan of Rs.15,50,000/- as Term loan and Rs.

5,40,000/- as working capital from Syndicate Bank, Alwal Branch, Hyderabad under

CGTMSE scheme.

He has put up his own capital of Rs. 8,00,000/- and successfully started the Unit of Blowing

of PET Bottles viz: Jars, Bottles for Water, Soda, Pharma and Cola bottles ranging from

200ml to 2000 ml. The unit was started at:

M/s R V Industries,

Plot No. 164/D, IDA, Phase-II, Cherlapally, Hyderabad-51.

Mob: 9989828582

SUCCESS STORIES-5

Mr Asif Khan is a graduate from Nizamabad dist. coming from a Minority family. He was the

5th son in his 06 brothers and sisters. As he has developed a strong idea for starting a

Recycling industry where his uncles are involved into the same business. But, he has made

up his idea for the plastics Recycling business. He has made a market study and found that

PET recycling unit is more profitable than normal polyolefin recycling industry.

At that moment he has seen Advt. of CIPET-NIMSME training and applied for the same. He

has started the PET Recycling unit after the training in his home town after resigning the

present job for the full time focus. CIPET has helped him in identifying the machinery and

was successful.

SUCCESS STORIES-6

G Janardhan Reddy has completed his graduation from Miryalguda and has completed his

PGDBM from Osmania University. His Father Late Mr G Nagi Reddy was a Govt. employee

and mother Mrs G Dhanamma was a home maker. After completing PGDBM, he worked as

a Software Engineer in TCS Mumbai for 2 Years. As he is more into entrepreneurship, he

enquired in different fields and finally chosen Plastic industry because of its usage .

He approached CIPET for Technical Support to start industry. CIPET has suggested for

a training as it is starting a training programme in association with ni-msme. JSN Industries

has set up Plastics Reprocessing Granules

JSN INDUSTRIES

After training he has approached Bank of India for a bank loan and Rs. 15 lakhs was

sanctioned a working capital. He has invested Rs 25 lakhs for purchasing the machinery. At

present his production turnover is 03 tons per day at a margin profit of Rs. 5/- per Kg, which

brings to Rs 15,000 per day as profit. The unit was set up at:

M/s J S N Industries,

Plot no.141, IDA, Phase-II, Cherlapally,

Hyderabad-500051

Mob: 9603152070; Web: www.jsnindustries.com

SUCCESS STORIES-7

Mr. V V Subba Rao is a native of Bapatla, Andhra Pradesh. He hails from an Agricultural

family and mother is a teacher in a Govt. School at Bapatla. His father has an agricultural

land and his mother has encouraged him to become an entrepreneur. Mr Subba Rao has

completed his degree in Science and later completed his Master of Administration (MBA) as

he was very much interested in Entrepreneurship.

Mr. V V Subba Rao has an interest in setting up a manufacturing unit and incessantly looking

towards the more technical knowledge as well as entrepreneur’s skills to establish a unit

successfully. In the mean while, he has seen an advertisement of CIPET in the local

newspaper for the educated unemployed youth organized by CIPET-Hyderabad as a

partnership institution and Sponsored by National Institute of Micro, Small and Medium

Enterprises (ni-msme), Hyderabad, Ministry of MSME, Govt. of India. He scrutinized by the

selection committee for the ESDP course & he has attended the ESDP training in

“Programming & Operation for numerically controlled CNC machines” has successfully

completed the training. In the training programme he was trained in the area of CNC

machines, Programming and operation of all types of machines, Entrepreneurship and

project & Business plan etc.

M/s Pavanasuta Plastics/

After completion of the training, he has initiated the process for machinery to starting the unit

in the name of M/s G V Plast, Plot No. 93/3,, C Ramapuram main road, R C Puram mandal,

Chittor Dist with his own funds as he has some good friends to support him and availability of

Raw material. The unit was later shifted to M/s Pavanasuta Plastics, F No 1&2 , APIIC,

Thimmapur, Guntakal, Anantapur Dist. as the raw material was not available as expected in

Chittoor Dist. and has also identified some good potential customers.

In the month of march, he has put up his own capital and capital from his relatives of Rs.

7,00,000/- and successfully started the Unit of Recycling unit of Polypropylene (PP), High

Density Polyethylene (HDPE) & Low Density Polyethylene (LDPE), etc.

By Dec 2012, M/s Pavanasuta Plastics has reached around Rs. 1,00,000/- turnover per

month and an average turnover of Rs 12,00,000/- per annum is expected.

SUCCESS STORIES-8

Mr. A. Rafi Ahamed is a native of Trichy district from Tamil Nadu. He has completed his

Engineering Degree with a specialisation in Instrumentation Control from Moogambi College,

Anna University, Tamil Nadu during the year 2005. He hails from a business family. Mr.

Ahamed Rasool, F/o Mr. Rafi Ahamed was a Mechanical Engineer and established M/s

Texon Systems which manufacturers Texon Preventer, an electronic device similar to

stabiliser. Mr. Rafi was brought up in a business environment. His mother was a home

maker. In course of time, as grew up, Mr. Rafi has developed interest towards business

rather doing a job. Though he can join his father and take care of family business, he did not

opt for that. He started his efforts for his own business in the Field of Mechanical Streamline.

Mr. Rafi Ahmed has come to know about the training program through advertisement

published in local news paper by Periyar TBI, Thanjavur for educated unemployed youth.

Immediately he has approached the institute and scrutinized by selection committee for the

training. He has attended the Entrepreneurship Development Program sponsored by the

Ministry of MSME, Govt. of India conducted by National Institute for Micro, Small & Medium

Enterprises (ni-msme), Hyderabad.

He gains so many technical skills about business and how to establish an industry. The

program has generated awareness on important government schemes for entrepreneurs.

Ultimately he has gained enough confidence to launch a small scale industry.

M/s Cube Engineering Fabrication Industry:

Soon after the training program, he has applied for Prime Ministers Employment Generation

Program (PMEGP) scheme with the guidance provided by the training institution. After six

months, his application was approved and loan was sanctioned by the District Collector,

Pudukottai. Indian Overseas Bank, Cantonment Branch, Trichy has released Rs. 24 lakhs

as loan amount with 25% subsidy.

Mr. Rafi has started Cube Engineering Fabrication Industry at SF.No 133/1E, Vadakaadu,

via Rasipuram, Near Mathur, Mandiyur-622515, Pudukottai District. He has invested the

loan amount for necessary plant and machinery in two acres of land given by his father.He is

manufacuring different kind of tools & industrial items and supplying to Cethar Vessels, GB

Engineering, and Tyre I industries and even to the big companies like BHEL by order.

SUCCESS STORIES-9

Mrs V Sunitha is a PGDPTCT from Central Institute of Plastics Engineering & Technology,

Hyderabad. Her husband is a Mechanical Engineering & working as a Production manager.

After a long time, she infers her knowledge but she wants to enhance the more technical

skills as well as Entrepreneurs skills to establish an industry.

She started an industry but due insufficient skills in establishing and running the industry.

She then approached CIPET. She was identified for the EDP Programme sponsored by

ni-msme. She completed the training and learnt about the Plastics Technology & Skills to

establish an industry. She approached for bank loan and was sanctioned by SBH,

Cherlapally of Rs. 1.40 Crores and self investment of Rs. 1.40 Crores.

SML Polymers:

She setup an industry of manufacturing PET performs & PET Bottles and supplying to SB

Beverages for Oxygem mineral water bottles and other esteemed customers.

M/s SML Polymers:

Plot No. 24, IDA,

Phase-III, Cherlapally,

Hyderabad- 500051

Email: smlp.smlg@gmail.com

Web: www.smlpolymers.com

SUCCESS STORIES- 10

Mr. K Uday Bhaskar is completed his Graduation from Warangal. His father is a farmer and

mother is a home maker.

He want to setup an industry but due insufficient knowledge about plastics and

entrepreneurship aspects. He came to know about CIPET and approached for technical

support and entrepreneurship development. He was scrutinized and advised to join in

Entrepreneurship Development Programme sponsored by ni-msme, Ministry of MSME. After

successful completion of training programme he gained some knowledge about Plastics.

Sonic Plastics:

He setup an industry by a self investment of Rs. 15 Lakhs to manufacture injection moulded

components. He is supplying various electrical components & accessories of appliances to

highly esteemed customers like Usha, Bajaj etc.

M/s Sonic Plastics:

FF-2 in Plot No 174, Survey No 246,

Subash nagar Colony,

IDA, Jeedimetla,

RangaReddy. Contact: 9440069042 Email: sonicplastics@gmail.com

SUCCESS STORIES- 11

Mrs D Aruna is a Post graduate in HR Department at Dr. B R Ambedkar Open University at

Hyderabad. she always had an ease in Business. She worked in Market field and She was

very much interested in Entrepreneurship. She wants to set up an Industry.

She approached with the idea to MSME balanagar. The officials there have referred her

to Mr. Sai surendra from CIPET for future industry & Technology ideas. CIPET has

suggested her to get trained initially and then later to start the unit. She has joined in the

training programme and successfully completed the programme She has availed a bank loan

through CGTMSE Scheme of Rs. 30 lakhs through Canara Bank, Ameerpet branch.

The unit was set up at :

M/s Ananya Greentech

Cherlapally, Hyderabad

SUCCESS STORIES- 12

JK Polymers are set up by Mr Kareem Shaik is a Post graduate. As his father Mr Madar

Saheb Shaik is also a business man and mother was a house wife

While he was trying his business plans and he was very much interested in

Entrepreneurship. He has identified the prosperity of business in Plastics Recycling and

approached CIPET when he has seen the advt. of CIPET – NIMSME. CIPET has suggested

him to get trained initially and then later to start the unit. He has joined in the training

programme and successfully completed the Programme

He has started the plastics Recycled Granules Manufacturing unit with a self investment of

Rs. 20,00,000/- . He was manufacturing Various types granuels like PP, HDPE, LDPE, Etc

The unit was started in:

M/s JK Polymers India Pvt. Ltd,

PLOT NO : D-36 , PHASE - 5,

IDA Jeedimetla, Hyderabad.

Mob: 9550776976

SUCCESS STORIES- 13

Mr Akhil Sanjeev is an B Tech Engineering graduate. As his father Mr Sanjeevi was an

entrepreneur in the area of plastics manufacturing and mother was a house wife. Seeing the

family in Business from his childhood, he always had an ease in Business. He want to

establish his own unit and He approached CIPET for Technical Support to start industry.

CIPET has suggested for a training as it is starting a training programme in association with

ni-msme.

After training he has approached Bank of Maharastra, Khairatabad for a bank loan

and Rs. 20 lakhs was sanctioned a working capital.

He has started the plastics Recycling unit

M/s Aavegh Polymers:

Plot No. 3 & 4, Survey No. 229-246,

BN Reddy Colony,

Phase 1, Main Road,

Cherlapally, Hyderabad.

Mob: 9966400007

For any further queries on courses and technical support provided by CIPET-Hyderabad.

Please contact:

Shri V Kiran Kumar, Chief Manager (Project) & Head

Central Institute of Plastics Engineering & Technology (CIPET), Hyderabad Ministry of Chemicals & Fertilizers, Govt. of India IDA, Phase II, Cherlapally, Hyderabad- 500051.

Phone: 040-27263750, 27263615: Fax: 91-40-27264051 Cell: 9959333415