case study for oakham primary school .pdf
TRANSCRIPT
7/30/2019 Case Study for Oakham Primary School .pdf
http://slidepdf.com/reader/full/case-study-for-oakham-primary-school-pdf 1/2
BSD
Lord Combustion Limited
Education
DW Flue System
MHS ADI LT
High Efficiency Condensing
Front Entrance
Twin wall flue
Airtherm have recently designed, supplied and installed a complete twin wall stainless steel flue system serving each MHS Adinox ADI LT 200 modulating boiler at Oakham Primary School in Dudley in the West Midlands.
The existing cast iron boilers were removed by the contractor during the Schoolsummer shut-down, working on a tight program the MHS high efficiency boilerswere installed followed by the installation of our flue system. All of the plant wascommissioned in time for the return of the pupils to enter a new begging.
The flue system installed was designed to completely evacuate the productscombustion taking into account for the over-pressure from each appliance. Eachprimary flue incorporated a volume control damper and draft regulator in the eventof unstable operation. The complete system had a 3 0 fall back to the appliance toallow condense to vacate and drain from the flue.
Airtherm Engineering Ltd only uses branded products which are synonymous withthe highest quality - and it is this reputation that enables specifiers and contractorsto use our versatile product range with total confidence
We can provide technical solutions for the specialist areas of high temperatureexhaust systems, serving generators & combined heat and powder units, fanassisted, flue dilution and atmospheric applications.MHS ADI LT Boilers
Header System with 3 0 incline
7/30/2019 Case Study for Oakham Primary School .pdf
http://slidepdf.com/reader/full/case-study-for-oakham-primary-school-pdf 2/2
• Boilers: MHS• Model: ADI LT 200
• Application: Chimney / Flue system
• Operating mode: Wet
• Pressure: Negative / positive pressure
• Working pressure: 200 Pa (product will operate 1000pa max)
• Inner wall: 316L1.4404/1.457 thickness 0,6 mm
•
Outer wall: 304/ 1.4301 thickness 0,5• Insulation: 30mm thick Rockwool insulation
• Sealant : Tri-lip 'o' type silicone ring
• Fuel type: Gas
•
• Condensing boilers
• Atmospheric gas-fired boilers
• Gas blown boilers
• Industrial ovens, large-scale establishments
• Wood-fired stoves
rtherm Masterflue
Airtherm Engineering Ltd
Ventilation House
Pedmore
Stoubridge
West Midlands
DY9 0DS
Tel: 0844 8092509
Fax: 01562 887312
imary Flues