List of MAK and BAT Values 2015. DFG, Deutsche ForschungsgemeinschaftCopyright Õ2015 WILEY-VCH Verlag GmbH&Co.KGaA, WeinheimISBN: 978-3-527-69553-9
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
CAS number Substance
35851-08-2 4-tert-Butyl-2-(5-tert-butyl-2-hydroxy-3-(hydroxymethyl)benzyloxy-methyl)-6-(hydroxymethyl)phenol (formaldehyde condensation product with ptBP)
not specified (yellow pages)64741-89-5 Distillates (petroleum), solvent-refined light paraffinic (yellow pages)64742-46-7 Distillates (petroleum), hydrotreated middle (yellow pages)64742-47-8 Petroleum distillates, hydrotreated light64742-48-9 White spirit64742-49-0 White spirit
CAS Number Index278
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
CAS number Substance
64742-52-5 Distillates (petroleum), hydrotreated heavy naphthenic; base oil not specified (yellowpages)
64742-54-7 Distillates (petroleum), hydrotreated heavy paraffinic; base oil not specified (yellowpages)
64742-55-8 Distillates (petroleum), hydrotreated light paraffinic; base oil not specified (yellow pages)64742-65-0 Distillates (petroleum), solvent-dewaxed heavy paraffinic; base oil
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
CAS number Substance
103223-10-5 2-[(4-Hydroxy-3-(hydroxymethyl)phenyl)methyl]-6-(hydroxymethyl)phenol(formaldehyde condensation product with phenol)
103223-11-6 4-[(4-Hydroxy-3,5-bis(hydroxymethyl)phenyl)methyl]-2-(hydroxymethyl)phenol(formaldehyde condensation product with phenol)
benzyloxymethyl)phenol (formaldehyde condensation product with ptBP)499219-07-7 4-tert-Butyl-2-(5-tert-butyl-2-hydroxybenzyloxymethyl)-6-(5-tert-
butyl-2-hydroxy-3-hydroxymethylbenzyloxymethyl)phenol(formaldehyde condensation product with ptBP)
CAS Number Index280
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 13.00.038 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Saturation Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: K=K CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Saturation Black Point Compensation: no Preserve Black: K=K Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes