castable 16 pds.pdf

Insulating Castables Cast Data CASTABLE #16 CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600°F as a hot face material and 1800°F as a backup insulation. CASTABLE #16 has a good strength to weight ratio and can replace block insulation for many applications. The most useful property is the very low K-factor. Maximum Service Temperature: 1800 o F (982 o C) Bulk Density: After 220 o F (105 o C) 38 lbs/ft 3 (608 kg/m 3 ) After 1500 o F (815 o C) 35 lbs/ft 3 (560 kg/m 3 ) Cold Crushing Strength: After 220 o F (105 o C) 180-300 psi (13-21 kg/cm 2 ) After 1500 o F (815 o C) 70-250 psi ( 5-18 kg/cm 2 ) Permanent Linear Change (%): After 1500 o F (815 o C) 0.0 to -3.0 Thermal Conductivity or “K” Factor: Mean Temp. BTU/ft 2 /Hr/ o F/in W/mK 500 o F (260 o C) 1.10 0.16 1000 o F (540 o C) 1.30 0.19 1500 o F (815 o C) 1.60 0.23 Typical Chemical Analysis (%): Al 2 O 3 SiO 2 Fe 2 O 3 CaO MgO TiO 2 Alkalies 16.8 55.8 1.4 18.0 5.3 0.7 2.0 Standard Packaging: 50-40 lb. bags per pallet The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted) conducted under controlled condition (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice. RESCO PRODUCTS disclaims any express or implied warranties based on this sheet. 02/28/08 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCO website to determine you have the current sheet

Upload: salomon-aldape

Post on 01-Oct-2015

238 views

Category:

Documents

2 download

Report

Download

Embed Size (px):

TRANSCRIPT

Insulating Castables Cast Data

CASTABLE #16

CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600F as a hot face material and 1800F as a backup insulation. CASTABLE #16 has a good strength to weight ratio and can replace block insulation for many applications. The most useful property is the very low K-factor. Maximum Service Temperature: 1800oF (982oC) Bulk Density: After 220oF (105oC) 38 lbs/ft3 (608 kg/m3) After 1500oF (815oC) 35 lbs/ft3 (560 kg/m3) Cold Crushing Strength: After 220oF (105oC) 180-300 psi (13-21 kg/cm2) After 1500oF (815oC) 70-250 psi ( 5-18 kg/cm2) Permanent Linear Change (%): After 1500oF (815oC) 0.0 to -3.0 Thermal Conductivity or K Factor: Mean Temp. BTU/ft2/Hr/oF/in W/mK 500oF (260oC) 1.10 0.16 1000oF (540oC) 1.30 0.19 1500oF (815oC) 1.60 0.23 Typical Chemical Analysis (%): Al2O3 SiO2 Fe2O3 CaO MgO TiO2 Alkalies 16.8 55.8 1.4 18.0 5.3 0.7 2.0 Standard Packaging: 50-40 lb. bags per pallet The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted) conducted under controlled condition (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice. RESCO PRODUCTS disclaims any express or implied warranties based on this sheet. 02/28/08 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCO website to determine you have the current sheet