cat i editable - vibro technologies & engineering pte ltd
TRANSCRIPT
Vibration Analyst Category I (CAT.I) certification courseprepares attendees to perform basic machinery vibrationanalysis on industrial machinery using single-channelmeasurements, with or without triggers signals, accordingto established and recognized procedures.
It covers basics of sensors, database anddata collector setup, data collection, signal processing,fault analysis, and basics of single plane balancing.
It is also a partial preparation for the Vibration AnalystCategory II (CAT.II) certification course.
The Course:
Course Dates:16 - 19 March 202122 - 25 June 202114 - 17 September 202109 - 12 November 2021
You should attend if: You are a technical/maintenance personnel who is new to Vibration and/or wish to enhance his knowledge in vibration.
TRAINING REPRESENTATIVE
Examination Location:
Vibro Technologies & Engineering Pte Ltd60 Ubi Crescent #01-05 Ubi TechparkSingapore 408569
Classroom / Online Learning
Training Center:Vibro Technologies & Engineering Pte Ltd60 Ubi Crescent #01-05 Ubi TechparkSingapore 408569
Topics that will be covered:
1. Vibration: sources, uses, effects2. Definitions, terminology, measurements; demonstrations3. Measures, analysis, natural frequencies; demonstrations4. Data collection demonstration5. Machine knowledge6. Vibration testing7. Basic spectrum analysis8. Common machine faults9. Vibration severity
Why should you attend this course?
Get certified as Category I (CAT.I) Vibration Analyst from the reputableVibration Institute USA.
Be one that is proficient to perform reliable pre-determined singlechannel vibration measurements, ability to compare such measurementsagainst pre-established alarms, identify of errors in collected data, reportvisual observations on the condition of equipment and transfer collecteddata to a computer based system.
Course Details
Course Fees:
Course Fees - SGD 2400.00 per person per paxinclusive of examination.All fees are subjected to 7% GST.
Re-examination fees - SGD 900.00 per pax( Including admin fees ) + 7% GST.
Full payment is to be made upon enrolment.Course fees include course materials.
Excludes VI membership/ surveillance fees orfees associated to Vibration Institute.
Terms & conditions apply.
Certification:
Attendance certificate will be issued byVibro.
VI Certification will be issued to thosewho pass the examination.
Mode Of Delivery:
Examination Date:
Scheduled ONE month after completion of course
About The Facilitator:
Nick Kang is the Director/Entrepreneur of Vibro Technologies &Engineering Pte Ltd and possess more than 20 years of experiencein diagnostics/predictive based maintenance.
He is a certified vibration analyst category III in accordance to ISO18436-2 and a certified SDT hatch cover inspector.
For additional information or enrollment:
Tel: +65 6749 2426( Helen/Ruby/Houston)
Email to: [email protected]( Attn: Helen/Ruby/Houston )
This course is organized and conducted by:
VIBRO TECHNOLOGIES & ENGINEERING PTE LTD
No Problem! Only Solutions