Siemens AP 01 · 2016 US Edition

6Sp

are

Parts

Spar

e Pa

rts

TechnicalSupport

TechnicalConsultingTechnicalConsulting TechnicalSupport

Service ProgramsServicePrograms

Engineering SupportEngineering Support

TrainingTraining

Modernization ServicesModernization Services

Online Support

Online Support

Field

ServiceField

Service

Optimization Services Optimization Services

6/2 SITRAIN - Training for Industry

6/4 PIA Life Cycle Portal6/4 Engineering, Ordering, Installation and

Operation tool

6/5 Partner at Siemens

Siemens Automation Cooperates with Education

6/6 Simplify your education in automation

Online Services6/8 Information and Ordering Options on the

Internet and DVD6/9 Information and Download Center,

Social Media, Mobile Media

Industry Services6/11 Industry Services – Portfolio overview6/13 Online Support

6/14 Software Licenses

6/16 Subject index

6/18 Article No. index

Appendix

© Siemens AG 2016

6/2 Siemens AP 01 · 2016 US Edition

AppendixSITRAIN – Training for Industry

6

Your benefit from practical training directly from the manu-facturer

SITRAIN – Training for Industry – provides you with comprehen-sive support in solving your tasks.

Training directly from the manufacturer enables you to make cor-rect decisions with confidence.

Increased profits and lower costs:• Shorter times for commissioning, maintenance and servicing• Optimized production operations• Reliable configuration and startup• Shorten commissioning times, reduce downtimes, and faster

troubleshooting• Exclude expensive faulty planning right from the start.• Flexible plant adaptation to market requirements• Compliance with quality standards in production• Increased employee satisfaction and motivation • Shorter familiarization times following changes in technology

and staff

Your benefits with SITRAIN – Training for Industry

Certified top trainers

Our trainers are skilled specialists with practical experience. Course developers have close contact with product develop-ment, and pass on their knowledge to the trainers and then to you.

Practical application with practice

Practice, practice, practice! We have designed the trainings with an emphasis on practical exercises. They take up to half of the course time in our trainings. You can therefore implement your new knowledge in practice even faster.

300 courses in more than 60 countries

We offer a total of about 300 classroom-based courses. You can find us at more than 50 locations in Germany, and in 62 countries worldwide. You can find which course is offered at which loca-tion at:www.siemens.com/sitrain

Skills development

Do you want to develop skills and fill in gaps in your knowledge? Our solution: We will provide a program tailored exactly to your personal requirements. After an individual requirements analy-sis, we will train you in our training centers near you or directly at your offices. You will practice on the most modern training equipment with special exercise units. The individual training courses are optimally matched to each other and help with the continuous development of knowledge and skills. After finishing a training module, the follow-up measures make success cer-tain, as well as the refreshment and deepening of the knowledge gained.

Contact

Visit our site on the Internet at:www.siemens.com/sitrain

or let us advise you personally. You can request our latest training catalog from:

SITRAIN – Training for Industry SITRAIN Customer Support Germany:

Tel.: +49 911 895-7575Fax: +49 911 895-7576

Email: info@sitrain.com

© Siemens AG 2016

6/3Siemens AP 01 · 2016 US Edition

AppendixSITRAIN – Training for Industry

6

■ U.S. Course Offer

Title Duration/Medium

Course code

Process Analyzers

CEMS System Overview 3 Days PIA-PACONAC1

ULTRAMAT 6 Service & Repair 1 Day PIA-PACONAC2

OXYMAT 6 Service & Repair 1 Day PIA-PACONAC3

ULTRAMAT 23 Service & Repair 1 Day PIA-PACGAC23

NOXMAT 6 Service & Repair 1 Day PIA-PACONAC5

FIDAMAT 6 Service & Repair 1 Day PIA-PACONAC4

LDS-6 LASER 6 Operations and Maintenance 1 Day PIA-PACGLDS6

Process Gas Chromatography

Introduction to Process Gas Chromatography 10 Hours eLearning PIA-PAOILOPTIA1

Introduction to Process Gas Chromatography 3 Days PIA-PAOPTIA1

Maxum Operation with GCP Level 1 4 Days PIA-PAMAXGCP1

Maxum Operation with GCP Level 1, Refresher 2 Hours eLearning PIA-PAMAXGCP1-RA1

Maxum Operation with GCP Level 2 4 Days PIA-PAMAXGCP2

Maxum Gas Chromatograph Portal Workshop 2 Days IA-PAMAXGCPWS

Maxum MaxBasic Software Development 4.5 Days PIA-PAMAXUM3

Maxum Analyzer Networks 4.5 Days PIA-PAMAXUM5

Maxum HRVOC Operation and Maintenance Short 3 Days PIA-PAMAXHR3

Maxum Performance Tools 2 Days PIA-PAMAXSTAT

Maxum Simulated Distillation 2 Days PIA-PAMAXUM8

MicroSAM Maintenance 3 Days PIA-PAMSAMS1

Total Sulphur Application 15 Hours eLearning PIA-PAOILMAXTSA

Total Sulphur Application 2 Days PIA-PAMAXTSA

© Siemens AG 2016

6/4 Siemens AP 01 · 2016 US Edition

AppendixPIA Life Cycle Portal

Engineering, Ordering, Installation and Operation Tool

6

■ Overview

The PIA Life Cycle Portal provides the appropriate functionality in all stages of the Product Life Cycle for products of Process In-strumentation, Process Analytics and Weighing Technology.

The application guides you through Engineering & Selection, supports you at the Order and provides tools and information for Installation and Operation.

• Phase 1: Selection & Planning• Phase 2: Ordering• Phase 3: Installation & Operation• Additional features: e. g. PIA Mobile

Phase 1: Selection & Planning

Selection

Achieve product solutions that meet your requirements by specifying rel-evant parameters according to the measuring point by using the guided selection or select the prod-uct directly in the product and ac-cessories tree.

Configuration

Configure a selected product step by step and use the integrated configuration knowl-edge to avoid errors.

Sizing & calculation

Sizing & calculation tools for Gas Analyzers, Weighing and Batching Systems and Flow measurement instruments.

Phase 2: Ordering

Bulk upload

Verify several part numbers in one step by uploading a simple text file.

Watchlist & projects

Collect products in a watch list and save it as a project for later use.

Interface to the Industry Mall

Order the selected products with the order-ing system for Siemens' automation and drive solutions.

Phase 3: Installation & Operation

Spare parts

Find appropriate spare parts for selected products or corresponding product fami-lies.

After sales support

Go to the Service and Support Portal to ac-cess manuals, certificates and further infor-mation concerning service & support.

Device information and history

Serial number specific product information for installed devices

Additional features

Personalize

Register in order to customize the applica-tion to your personal needs.

PIA Mobile

Use the product selection, configuration and device information and history with the version optimized for mobile devices. www.siemens.com/piamobile

Product details

Find all relevant product information at a single glance: commercial and technical data, certificates, images and documents, etc.

■ More information

PIA Life Cycle PortalOstliche Rheinbrückenstraße 5076187 Karlsruhe, GermanyTel.: +49 (721) 595 2114E-Mail: support.pia-portal@siemens.comwww.siemens.com/pia-portal

© Siemens AG 2016

6/5Siemens AP 01 · 2016 US Edition

AppendixPartner at Siemens

6

At Siemens we are resolutely pursuing the same goal: long-term improvement of your competitive ability. We are committed to this goal. Thanks to our commitment, we continue to set new standards in automation and drive technology. In all industries – worldwide.

At your service locally, around the globe for consulting, sales, training, service, support, spare parts ... on the entire Industry Automation and Drive Technologies range.

Your personal contact can be found in our Contacts Database at:www.siemens.com/automation-contact

You start by selecting • the required competence, • products and branches, • a country, • a city

or by a• location search or• person search.

© Siemens AG 2016

6/6 Siemens AP 01 · 2016 US Edition

AppendixSiemens Automation Cooperates with Education

Simplify your education in automation

6

■ Unique support for educators and students in educational institutions

Siemens Automation Cooperates with Education (SCE) offers a global system for sustained support of technical skills. SCE supports educational institutions in their teaching assign-ment in the industrial automation sector and offers added value in the form of partnerships, technical expertise, and know-how. As the technological leader, our comprehensive range of ser-vices can support you in the knowledge transfer for Industry 4.0.

Our services at a glance• Training curriculums for your lessons• Trainer packages for hands-on learning• Courses convey up-to-date specialist knowledge• Support for your projects / textbooks• Complete didactic solutions from our partners• Personal contact for individual support

Training curriculums for your lessons

Use our profound industrial know-how for practiceoriented and individual design of your course. We offer you more than 100 di-dactically prepared training curriculums on the topics of auto-mation and drives technology free of charge. These materials are perfectly matched to your curricula and syllabuses, and optimally suited for use with our trainer packages. This takes into account all aspects of a modern industrial solution: installation, configuration, programming, and commissioning. All docu-ments, including projects, can be individually matched to your specific requirements.

Particular highlights: • The new SIMATIC PCS 7 curriculums and trainer packages.

Using plant simulation, you can pass on basic, practice-oriented PCS 7 knowledge at universities within about 60 hours (= 1 semester).

• The new TIA Portal training materials for SIMATIC S7-1500 / S7-1200 / S7-300 are available in English, German, French, Italian, Spanish, Portuguese and Chinese for download.

www.siemens.com/sce/curriculums

Trainer packages for hands-on learning

Our SCE trainer packages offer a specific combination of origi-nal industrial components which are perfectly matched to your requirements and can be conveniently used in your course. These price-reduced bundles available exclusively to schools include innovative and flexible hardware and software pack-ages. SCE currently offers more than 80 SCE trainer packages includ-ing related equipment e.g. Micro Memory. These cover both the factory and process automation sectors. You can use them to im-part the complete course contents on industrial automation at a very low cost.

Trainer packages are available for:• Introduction to automation technology with LOGO! logic

module• PLC engineering with SIMATIC S7 hardware and STEP 7

software (S7-1500, S7-1200, S7-300 and TIA Portal)• Operator control and monitoring with SIMATIC HMI• Industrial networking over bus systems with SIMATIC NET

(PROFINET, PROFIBUS, IO-Link)• Sensor systems with VISION, RFID and SIWAREX• Process automation with SIMATIC PCS 7• Networked drive and motion technologies with

SINAMICS/SIMOTION• Power Monitoring Devices SENTRON PAC 4200• Motor Management SIMOCODE• CNC programming with SinuTrain

Important ordering notes:

Only the following institutions are authorized to obtain trainer packages: vocational schools, Colleges and Universities, in-house vocational training departments, non commercial re-search institutions and non commercial training departments.

To purchase a trainer package, you require a specific end-use certificate, which you can obtain from your regional sales office.

www.siemens.com/sce/tp

© Siemens AG 2016

6/7Siemens AP 01 · 2016 US Edition

AppendixSiemens Automation Cooperates with Education

Simplify your education in automation

6

■ Unique support for educators and students in educational institutions (continued)

Courses convey up-to-date specialist knowledge

Profit from our excellent know-how as the leader in industrial technologies. We offer you specific courses for automation and drive technology worldwide. These support you in the practice-oriented transferring of product and system know-how, are in conformance with curriculums, and derived from the training fields. Compact technical courses especially for use at universi-ties are also available.

Our range of courses comprises a wide variety of training modules based on the principle of Totally Integrated Automation (TIA). The focus is on the same subject areas as with the SCE trainer packages.

Every PLC and drive course is oriented on state-of-the-art tech-nology. Your graduates can thus be prepared optimally for their future professional life.

In some countries we are offering classes based on our training curriculums. Please inquire with your SCE contact partner.

www.siemens.com/sce/courses

Support for your projects/textbooks

Automation and drive technology is characterized by continuous and rapid developments. Service and Support therefore play an important role.

We can provide you with consulting for selected projects and support from your personal SCE contact as well as our web-based and regional Customer Support.

As a particular service, SCE supports technical authors with our know-how as well as with intensive technical consulting. Siemens library of special textbooks covering the industrial automation sector provides an additional resource for you and your students. These can be found at the SCE web site.

www.siemens.com/sce/contact www.siemens.com/sce/books

Complete didactic solutions from our partners

Our partners for learning systems offer a wide range of training systems and solutions for use in your courses or laboratory.

These models have been designed based on our trainer pack-ages and thus save you the time and cost of selfconstruction of individual components. The Partner systems provide you with simple and effective help in the fulfillment of your teaching assignment.

www.siemens.com/sce/partner

Contact for individual support

You can find your personal SCE contact on our Internet site. Your local SCE Promoter will answer all your questions concerning the complete SCE offering, and provide you with timely and compe-tent information about innovations. When you encounter chal-lenges, you can profit from our global team of excellence.

If a direct SCE contact is not listed for your country, please con-tact your local Siemens office.

www.siemens.com/sce/contact

SCE Support Finder for your Internet request

You are an educator and need support on the topic of industry automation? Send us your request:

www.siemens.com/sce/supportfinder

© Siemens AG 2016

6/8 Siemens AP 01 · 2016 US Edition

AppendixOnline Services

Information and Ordering Options on the Internet and DVD

6

■ The Future of Manufacturing on the Internet

Detailed knowledge of the range of products and services available is essential when planning and engineering automa-tion systems. It goes without saying that this information must always be as up-to-date as possible.

Industry is on the threshold of the fourth industrial revolution as digitization now follows after the automation of production. The goals are to increase productivity and efficiency, speed, and quality. In this way, companies can remain competitive on the path to the future of industry.

You will find everything you need to know about products, systems and services on the internet at:

www.siemens.com/industry

■ Product Selection Using the Interactive CA 01 Automation and Drives Catalog

Detailed information together with user-friendly interactive functions: The CA 01 interactive catalog covers more than 100,000 products, thus providing a comprehensive overview of the product range provided by Siemens.

You will find everything you need here for solving tasks in the fields of automation, switching, installation and drives. All information is provided over a user interface that is both user-friendly and intuitive.

You can order the CA 01 product catalog from your Siemens sales contact or in the Information and Download Center:

www.siemens.com/industry/infocenter

Information about the CA 01 interactive catalog can be found on the Internet at:

www.siemens.com/automation/ca01

or on DVD.

■ Easy Shopping with the Industry Mall

The Industry Mall is the electronic ordering platform of Siemens AG on the Internet. Here you have online access to a huge range of products presented in an informative and attractive way.

Data transfer via EDIFACT allows the whole procedure, from selection through ordering to tracking and tracing, to be carried out online. Availability checks, customer-specific discounts and bid creation are also possible.

Numerous additional functions are provided for your support. For example, powerful search functions make it easy to select the required products. Configurators enable you to configure complex product and system components quickly and easily. CAx data types are also provided here.

You can find the Industry Mall on the Internet at:

www.siemens.com/industrymall

© Siemens AG 2016

6/9Siemens AP 01 · 2016 US Edition

AppendixOnline Services

Information and Download Center, Social Media, Mobile Media

6

■ Downloading Catalogs

In addition to numerous other useful documents, you can also find the catalogs listed on the back inside cover of this catalog in the Information and Download Center. You can download these catalogs in PDF format without having to register.

The filter dialog above the first catalog displayed makes it possible to carry out targeted searches. If you enter "MD 3" for example, you will find both the MD 30.1 and MD 31.1 catalogs. If you enter "IC 10", both the IC 10 catalog and the associated news or add-ons are displayed.

Visit us at:

www.siemens.com/industry/infocenter

■ Social and Mobile Media

Connect with Siemens through social media: visit our social networking sites for a wealth of useful information, demos on products and services, the opportunity to provide feedback, to exchange information and ideas with customers and other Siemens employees, and much, much more. Stay in the know and follow us on the ever-expanding global network of social media.

To find out more about Siemens' current social media activities, visit us at:

www.siemens.com/socialmedia

Or via our product pages at:

www.siemens.com/automation or www.siemens.com/drives

Connect with Siemens Industry at our central access point to read all the news on the future of manufacturing, watch current videos and inform yourself about all the latest industry developments:

www.siemens.com/future-of-manufacturing/news.html

Discover the world of Siemens.

We are also constantly expanding our offering of cross-platform apps for smartphones and tablets. You will find the current Siemens apps at the App Store (iOS) or at Google Play (Android):

https://itunes.apple.com/en/app/siemens/id452698392?mt=8

https://play.google.com/store/search?q=siemens

The Siemens app, for example, tells you all about the history, latest developments and future plans of the company – with informative pictures, fascinating reports and the most recent press releases.

© Siemens AG 2016

6/10 Siemens AP 01 · 2016 US Edition

AppendixIndustry Services

6

■ Overview

Unleash potential – with services from Siemens

Increase your performance – with Industry Services

Optimizing the productivity of your equipment and operations can be a challenge, especially with constantly changing market conditions. Working with our service experts makes it easier. We understand your industry’s unique processes and provide the services needed so that you can better achieve your business goals.

You can count on us to maximize your uptime and minimize your downtime, increasing your operations’ productivity and reliabil-ity. When your operations have to be changed quickly to meet a new demand or business opportunity, our services give you the flexibility to adapt. Of course, we take care that your production is protected against cyber threats. We assist in keeping your operations as energy and resource efficient as possible and re-ducing your total cost of ownership. As a trendsetter, we ensure that you can capitalize on the opportunities of digitalization and by applying data analytics to enhance decision making: You can be sure that your plant reaches its full potential and retains this over the longer lifespan.

You can rely on our highly dedicated team of engineers, techni-cians and specialists to deliver the services you need – safely, professionally and in compliance with all regulations. We are there for you, where you need us, when you need us.

TrainingServices

ServicePrograms andAgreements

Retrofit andModernizationServices

G_DA65_XX_00272RepairServices

Field andMaintenanceServices

Spare PartsServices

Plant DataServices

Support andConsultingServices

© Siemens AG 2016

6/11Siemens AP 01 · 2016 US Edition

AppendixIndustry Services

Industry Services – Portfolio overview

6

■ Overview

Make your industrial processes transparent to gain improve-ments in productivity, asset availability, and energy efficiency.

Production data is generated, filtered and translated with intelli-gent analytics to enhance decision-making.

This is done whilst taking data security into consideration and with continuous protection against cyber attack threats.

www.industry.siemens.com/services/global/en/portfolio/plant-data-services/Pages/index.aspx

From the basics and advanced to specialist skills, SITRAIN courses provide expertise right from the manufacturer – and encompass the entire spectrum of Siemens products and systems for the industry.

Worldwide, SITRAIN courses are available wherever you need a training course in more than 170 locations in over 60 countries.

www.industry.siemens.com/services/global/en/portfolio/training/Pages/index.aspx

Industry Online Support site for comprehensive information, application examples, FAQs and support requests.

Technical and Engineering Support for advice and answers for all inquiries about functionality, handling, and fault clearance.

Information & Consulting Services, e.g. SIMATIC System Audit; clarity about the state and service capability of your auto-mation system or Lifecycle Information Services; transparency on the lifecycle of the products in your plants.

www.industry.siemens.com/services/global/en/portfolio/support-consulting/Pages/index.aspx

Are available worldwide for smooth and fast supply of spare parts – and thus optimal plant availability. Genuine spare parts are available for up to ten years. Logistic experts take care of procurement, transport, custom clearance, storage and order management. Reliable logistics processes ensure that compo-nents reach their destination as needed.

Asset optimization services help you design a strategy for parts supply where your investment and carrying costs are reduced and the risk of obsolescence is avoided.

www.industry.siemens.com/services/global/en/portfolio/spare_parts/Pages/index.aspx

Plant DataServices

TrainingServices

Support andConsultingServices

Spare PartsServices

© Siemens AG 2016

6/12 Siemens AP 01 · 2016 US Edition

AppendixIndustry Services

Industry Services – Portfolio overview

6

■ Overview (continued)

Are offered on-site and in regional repair centers for fast resto-ration of faulty devices’ functionality.

Also available are extended repair services, which include addi-tional diagnostic and repair measures, as well as emergency services.

www.industry.siemens.com/services/global/en/portfolio/repair_services/Pages/index.aspx

Siemens specialists are available globally to provide expert field and maintenance services, including commissioning, functional testing, preventive maintenance and fault clearance. All services can be included in customized service agreements with defined reaction times or fixed maintenance intervals.

www.industry.siemens.com/services/global/en/portfolio/field_service/Pages/index.aspx

Provide a cost-effective solution for the expansion of entire plants, optimization of systems or upgrading existing products to the latest technology and software, e.g. migration services for automation systems.

Service experts support projects from planning through commis-sioning and, if desired over the entire extended lifespan, e.g. Retrofit for Integrated Drive Systems for an extended lifetime of your machines and plants

www.industry.siemens.com/services/global/en/portfolio/retrofit-modernization/Pages/index.aspx

A technical Service Program or Agreement enables you to easily bundle a wide range of services into a single annual or multi-year agreement.

You pick the services you need to match your unique require-ments or fill gaps in your organization’s maintenance capa-bilities. Programs and agreements can be customized as KPI-based and/or performance-based contracts.

www.industry.siemens.com/services/global/en/portfolio/service_programs/Pages/index.aspx

RepairServices

Field andMaintenanceServices

Retrofit andModernizationServices

ServicePrograms andAgreements

© Siemens AG 2016

6/13Siemens AP 01 · 2016 US Edition

AppendixIndustry Services

Online Support

6

■ Overview

Online Support is a comprehensive information system for all questions relating to products, systems, and solutions that Siemens has developed for industry over time. With more than 300,000 documents, examples and tools, it offers users of auto-mation and drive technology a way to quickly find up-to-date information. The 24-hour service enables direct, central access to detailed product information as well as numerous solution examples for programming, configuration and application.

The content, in six languages, is increasingly multimedia-based – and now also available as a mobile app. Online support’s “Technical Forum” offers users the opportunity to share informa-tion with each other. The “Support Request” option can be used to contact Siemens’ technical support experts. The latest content, software updates, and news via newsletters and Twitter ensure that industry users are always up to date.

www.siemens.com/industry/onlinesupport

Online Support App

Using the Online Support app, you can access over 300,000 documents covering all Siemens industrial products – anywhere, any time. Regardless of whether you need help implementing your project, fault-finding, expanding your system or are plan-ning a new machine.

You have access to FAQs, manuals, certificates, characteristic curves, application examples, product notices (e.g. announce-ments of new products) and information on successor products in the event that a product is discontinued.

Just scan the product code printed on the product directly using the camera of your mobile device to immediately see all techni-cal information available on this product at a glance. The graphical CAx information (3D model, circuit diagrams or EPLAN macros) is also displayed. You can forward this informa-tion to your workplace using the e-mail function.

The search function retrieves product information and articles and supports you with a personalized suggestion list. You can find your favorite pages – articles you need frequently – under “mySupport”. You also receive selected news on new functions, important articles or events in the News section.

The app is available free of charge from the Apple App Store (iOS) or from Google Play (Android).

https://support.industry.siemens.com/cs/ww/en/sc/2067

s

Scan the QR code for information on our Online Support app.

© Siemens AG 2016

6/14 Siemens AP 01 · 2016 US Edition

AppendixSoftware Licenses

6

■ Overview

Software typesSoftware requiring a license is categorized into types.The following software types have been defined:• Engineering software• Runtime software

Engineering softwareThis includes all software products for creating (engineering) user software, e.g. for configuring, programming, parameteriz-ing, testing, commissioning or servicing. Data generated with engineering software and executable programs can be duplicated for your own use or for use by third-parties free-of-charge.

Runtime softwareThis includes all software products required for plant/machine operation, e.g. operating system, basic system, system expan-sions, drivers, etc.The duplication of the runtime software and executable pro-grams created with the runtime software for your own use or for use by third-parties is subject to a charge. You can find information about license fees according to use in the ordering data (e.g. in the catalog). Examples of categories of use include per CPU, per installation, per channel, per instance, per axis, per control loop, per variable, etc.Information about extended rights of use for parameteriza-tion/configuration tools supplied as integral components of the scope of delivery can be found in the readme file supplied with the relevant product(s).

License typesSiemens Industry Automation & Drive Technologies offers vari-ous types of software license:• Floating license• Single license• Rental license• Rental floating license• Trial license• Demo license• Demo floating license

Floating licenseThe software may be installed for internal use on any number of devices by the licensee. Only the concurrent user is licensed. The concurrent user is the person using the program. Use begins when the software is started. A license is required for each concurrent user.

Single licenseUnlike the floating license, a single license permits only one installation of the software per license. The type of use licensed is specified in the ordering data and in the Certificate of License (CoL). Types of use include for example per instance, per axis, per channel, etc. One single license is required for each type of use defined.

Rental licenseA rental license supports the "sporadic use" of engineering software. Once the license key has been installed, the software can be used for a specific period of time (the operating hours do not have to be consecutive). One license is required for each installation of the software.

Rental floating licenseThe rental floating license corresponds to the rental license, except that a license is not required for each installation of the software. Rather, one license is required per object (for example, user or device).

Trial licenseA trial license supports "short-term use" of the software in a non-productive context, e.g. for testing and evaluation purposes. It can be transferred to another license.

Demo licenseThe demo license support the "sporadic use" of engineering soft-ware in a non-productive context, for example, use for testing and evaluation purposes. It can be transferred to another license. After the installation of the license key, the software can be operated for a specific period of time, whereby usage can be interrupted as often as required.One license is required per installation of the software.

Demo floating licenseThe demo floating license corresponds to the demo license, except that a license is not required for each installation of the software. Rather, one license is required per object (for example, user or device).

Certificate of license (CoL)The CoL is the licensee's proof that the use of the software has been licensed by Siemens. A CoL is required for every type of use and must be kept in a safe place.

DowngradingThe licensee is permitted to use the software or an earlier ver-sion/release of the software, provided that the licensee owns such a version/release and its use is technically feasible.

Delivery versionsSoftware is constantly being updated.The following delivery versions• PowerPack• Upgradecan be used to access updates.Existing bug fixes are supplied with the ServicePack version.

PowerPackPowerPacks can be used to upgrade to more powerful software.The licensee receives a new license agreement and CoL (Certificate of License) with the PowerPack. This CoL, together with the CoL for the original product, proves that the new soft-ware is licensed. A separate PowerPack must be purchased for each original license of the software to be replaced.

UpgradeAn upgrade permits the use of a new version of the software on the condition that a license for a previous version of the product is already held.The licensee receives a new license agreement and CoL with the upgrade. This CoL, together with the CoL for the previous product, proves that the new version is licensed.A separate upgrade must be purchased for each original license of the software to be upgraded.

© Siemens AG 2016

6/15Siemens AP 01 · 2016 US Edition

AppendixSoftware Licenses

6

■ Overview

ServicePackServicePacks are used to debug existing products. ServicePacks may be duplicated for use as prescribed accord-ing to the number of existing original licenses.

License keySiemens Industry Automation & Drive Technologies supplies software products with and without license keys.The license key serves as an electronic license stamp and is also the "switch" for activating the software (floating license, rental license, etc.).The complete installation of software products requiring license keys includes the program to be licensed (the software) and the license key (which represents the license).

Software Update Service (SUS)As part of the SUS contract, all software updates for the respec-tive product are made available to you free of charge for a period of one year from the invoice date. The contract will automatically be extended for one year if it is not canceled three months before it expires.The possession of the current version of the respective software is a basic condition for entering into an SUS contract.

© Siemens AG 2016

6/16 Siemens AP 01 · 2016 US Edition

AppendixSubject index

6

A Adjustment ..................................................................................................1/4Analysis of biogas .....................................................................................4/38Analytical Application Set ...........................................................................4/2• Set ASM ................................................................................................4/57• Set BGA ................................................................................................4/38• Set CEM 1 ...............................................................................................4/8• Set CEM CERT ........................................................................................4/7• Set CV ..................................................................................................4/18• Set GGA ...............................................................................................4/42Analyzer cabinet .......................................................................................4/43

CCalibration ...................................................................................................1/4CALOMAT 6 ............................................................................................1/148CALOMAT 62 ..........................................................................................1/168Certificates ................................................................................................5/12Combination probe D-RX 250 ...................................................................4/27Cross-duct sensor CD 6 ...........................................................................2/20Cross-interference ..................................................................................1/140Cross-sensitivity ..........................................................................................1/4Communication• Analyzer System Manager ASM ...........................................................4/57• Extractive ................................................................................................5/2Continuous emission monitoring .................................................................4/3Continuous gas analyzers• Extractive ................................................................................................1/2• In-situ ....................................................................................................2/20Continuous monitoring of hydrogen-cooled generators ...........................4/42

DDefinitions .................................................................................................5/39Determination of the quality of natural gas ...............................................4/47Diode laser gaz analyzer .............................................................................2/3Display and control unit for dust and volume flow measuring instruments D-ISC 100...............................................................................4/33Dust and opacity measurement ................................................................4/19• D-R 220 Dust and opacity measuring instrument ................................4/19• D-R 290 New Generation, Dust concentration measuring instrument .4/21• D-R 320 Dust measuring instrument .....................................................4/23• D-R 800 Dust measuring instrument ....................................................4/25• D-RX 250 Combination probe ..............................................................4/23

EELAN ...........................................................................................................5/2Electrochemical sensor ............................................................................1/16Environmental and process data management systems• D-EMS 2000 .........................................................................................4/35• D-EMS 2000 CS ....................................................................................4/37Ex versions ................................................................................................5/13Explosion protection ...................................................................................1/4

FFAT & factory certificates ..........................................................................5/12FIDAMAT 6 ..............................................................................................1/187Flammable gases .......................................................................................1/4

GGas analysis library ....................................................................................5/7Gas chromatograph ..................................................................................3/27

HH2S determination ....................................................................................1/16HM-1400 TRX Total mercury analyzer system ..........................................4/17

IIn-situ O2 gas analyzer SITRANS SL .......................................................2/31Infrared two-beam alternating light principle ...........................................1/80Installation frame .......................................................................................4/43International Standards ............................................................................5/37

LLDS 6 ........................................................................................................2/20

MMAXUM edition II ........................................................................................3/3Measuring procedures• Extractive ...............................................................................................1/2• Infrared two-beam alternating light principle .......................................1/46• Infrared measurement...........................................................................1/14• Molecule-specific absorption .............................................1/14, 1/46, 1/80• Oxygen measurement...........................................................................1/15• Paramagnetism .....................................................1/16, 1/81, 1/103, 1/125• Substance-specific ............................................................................1/191• Thermal conductivity................................................................1/151, 1/171MicroSAM .................................................................................................3/18MODBUS ....................................................................................................5/9Molecular absorption spectroscopy ...........................................................2/6Monitoring in flue gases ..............................................................................4/8

NNatural gas analysis ..................................................................................3/24

OOPC server .................................................................................................5/8Operator functions of Series 6...................................................................5/11OXYMAT 6 ................................................................................................1/98OXYMAT 61 ............................................................................................1/122OXYMAT 64 ............................................................................................1/134

PParamagnetic oxygen cell ........................................................................1/16Paramagnetic alternating pressure method ....................................1/75, 1/98Process engineering ...................................................................................3/2Process gas chromatographs• MAXUM Edition II ....................................................................................3/2• MicroSAM..............................................................................................3/18• SITRANS CV..........................................................................................3/27Process gas chromatography ....................................................................3/2PROFIBUS ..................................................................................................5/5PROFIBUS DP ............................................................................................5/7Test gas skid..............................................................................................4/43

SSet ASM ....................................................................................................4/57Set BGA ....................................................................................................4/38Set CEM 1 ...................................................................................................4/8Set CEM CERT ...........................................................................................4/4Set CV ......................................................................................................4/47Set GGA ...................................................................................................4/42SIMATIC PCS 7 ...........................................................................................5/7SIPROCESS UV600 ................................................................................1/202SITRANS CV .............................................................................................3/27SITRANS SL ..............................................................................................2/31Specific light absorption .............................................................................2/3

© Siemens AG 2016

6/17Siemens AP 01 · 2016 US Edition

AppendixSubject index

6

TTables ........................................................................................................5/34Thermal conductivity..........................................................1/148, 1/151, 1/171Total mercury analyzer system HM-1400 TRX ...........................................4/17Turbo generators, hydrogen-cooled .........................................................4/42

UULTRAMAT 23 .............................................................................................1/5ULTRAMAT 6 .............................................................................................1/41ULTRAMAT/OXYMAT 6 ..............................................................................1/75

VVolume flow measurement.........................................................................4/29Volume flow measurement systems• D-FL 100 ...............................................................................................4/29• D-FL 220 ...............................................................................................4/31

© Siemens AG 2016

6/18 Siemens AP 01 · 2016 US Edition

AppendixArticle No. index

6

7KQ...7KQ2150 ....................................................4/537KQ2151 ....................................................4/547KQ2152 ....................................................4/557KQ2153 ....................................................4/567KQ2158-0A.00 .........................................4/567KQ2160 ....................................................3/337KQ3101 ....................................................3/237KQ3105 ....................................................3/33

7MB...7MB1933-8AA..........................1/22, 1/25, 1/287MB1950....................................................4/457MB1953....................................................4/147MB1955....................................................4/407MB1957......................................................4/67MB2001..................................................1/1287MB2011..................................................1/1157MB2021..................................................1/1087MB2023....................................................1/867MB2024....................................................1/897MB2041..................................................1/1427MB2111....................................................1/647MB2112....................................................1/677MB2121....................................................1/797MB2123....................................................1/517MB2124....................................................1/547MB2335....................................................1/217MB2337....................................................1/237MB2338....................................................1/267MB2355....................................................1/297MB2357....................................................1/307MB2358....................................................1/317MB2421..................................................1/1957MB2511..................................................1/1617MB2521..................................................1/1547MB2531..................................................1/1807MB2541..................................................1/1747MB2621..................................................1/2077MB3040......................................................1/37MB6121....................................................2/117MB6122....................................................2/257MB6221....................................................2/477MB8000-1AA.............1/66, 1/68, 1/116, 1/1627MB8000-2BA.............1/66, 1/68, 1/116, 1/1627MB8000-2BB.............1/66, 1/68, 1/116, 1/1627MB8000-2CA.............1/66, 1/68, 1/116, 1/1627MB8000-2CB.............1/66, 1/68, 1/116, 1/1627MB8000-3AB.............1/66, 1/68, 1/116, 1/1627MB8000-4AA.............1/66, 1/68, 1/116, 1/1627MB8000-4AB.............1/66, 1/68, 1/116, 1/1627MB8000-5AA.............1/66, 1/68, 1/116, 1/1627MB8000-6BA.............1/66, 1/68, 1/116, 1/1627MB8000-6BB.............1/66, 1/68, 1/116, 1/1627MB8100....................................................5/12

A5E...A5E00054148...........................................1/167A5E00054148...........................................1/217A5E00056834...........................1/22, 1/25, 1/28A5E00057159...........................1/22, 1/25, 1/28A5E00057307.................1/50, 1/53, 1/56, 1/88,.................................1/91, 1/109, 1/128, 1/142,...........................................1/155, 1/174, 1/195A5E00057312.................1/50, 1/53, 1/56, 1/88, .................................1/91, 1/109, 1/128, 1/142,...........................................1/155, 1/174, 1/195A5E00057315........................1/66, 1/68, 1/116,......................................................1/162, 1/181A5E00057317..............1/66, 1/68, 1/116, 1/162A5E00057318........................1/66, 1/68, 1/116,......................................................1/162, 1/181

A5E00061505 ...................... 1/74, 1/121, 1/167A5E00064223 ....................... 1/66, 1/68, 1/116,...................................................... 1/162, 1/181A5E00095332 .......................................... 1/167A5E00114838 .......................................... 1/133A5E00116454 .......................................... 1/167A5E00116455 .......................................... 1/167A5E00116456 .......................................... 1/167A5E00116457 .......................................... 1/167A5E00116458 .......................................... 1/167A5E00118527 ................................ 1/74 , 1/121A5E00118530 ................................. 1/74, 1/121A5E00123066 .......................................... 1/132A5E00123067 .......................................... 1/132A5E00123068 .......................................... 1/132A5E00123069 .......................................... 1/132A5E00123070 .......................................... 1/132A5E00124182 .......................................... 1/167A5E00221703 .......................................... 1/200A5E00222135 .......................................... 1/200A5E00222138 .......................................... 1/200A5E00222141 .......................................... 1/200A5E00222144 .......................................... 1/200A5E00248790 .......................................... 1/201A5E00248795 .......................................... 1/201A5E00248819 .......................................... 1/201A5E00248822 .......................................... 1/201A5E00248845 .......................................... 1/201A5E00248851 .......................................... 1/201A5E00248920 .......................................... 1/201A5E00253111 ............................................ 2/30A5E00253112 ............................................ 2/30A5E00253113 ............................................ 2/30A5E00253142 ............................................ 2/26A5E00259978 .......................................... 1/133A5E00283770 .......................................... 1/201A5E00283780 .......................................... 1/201A5E00283800 .......................................... 1/201A5E00283817 .......................................... 1/201A5E00284092 .......................................... 1/201A5E00284094 .......................................... 1/201A5E00284095 .......................................... 1/201A5E00284096 .......................................... 1/201A5E00295107 .......................................... 1/201A5E00295333 .......................................... 1/201A5E00295469 .......................................... 1/201A5E00295816 .......................................... 1/201A5E00295893 ............................................ 2/30A5E00295894 ............................................ 2/30A5E00295895 ............................................ 2/30A5E00295896 ............................................ 2/30A5E00295928 .......................................... 1/201A5E00295976 .......................................... 1/201A5E00296562 .......................................... 1/201A5E00296565 .......................................... 1/201A5E00302916 ............................................ 1/74A5E00313839 .......................................... 1/201A5E00338487 ............................................ 2/30A5E00338490 ............................................ 2/30A5E00338533 ............................................ 2/30A5E00338563 ............................................ 2/30A5E00338572 ............................................ 2/30A5E00362720 ............................................ 2/30A5E00476038 .......................................... 1/200A5E00478463 .......................................... 1/200A5E00478466 .......................................... 1/200A5E00478468 .......................................... 1/200A5E00478469 .......................................... 1/200A5E00534662 ............................................ 2/30A5E00534663 ............................................ 2/30A5E00534664 ............................................ 2/30

A5E00534668 ...................................2/12, 2/26A5E00534675 ............................................2/12A5E00823339001 ......................................2/12A5E00823339002 ......................................2/12A5E00823339003 ......................................2/12A5E00823339004 ......................................2/12A5E00823339005 ......................................2/12A5E00823339006 ......................................2/12A5E00823339007 ......................................2/12A5E00823339008 ......................................2/12A5E00823339009 ......................................2/12A5E00823339011 ......................................2/12A5E00823339012 ......................................2/12A5E00823339013 ......................................2/12A5E00823339014 ......................................2/12A5E00823339015 ......................................2/12A5E00829150 ............................................2/26A5E00829151 ............................................2/26A5E00852382 ................1/22, 1/25, 1/28, 1/50,.......................................1/53, 1/56, 1/66, 1/68, ...................................1/78, 1/91, 1/109, 1/116,...............................1/128, 1/142, 1/155, 1/162,...........................................1/174, 1/181, 1/195A5E00852383 ................1/22, 1/25, 1/28, 1/50,.......................................1/53, 1/56, 1/66, 1/68,...................................1/88, 1/91, 1/109, 1/116,...............................1/128, 1/142, 1/155, 1/162, ...........................................1/174, 1/181, 1/195A5E00853896 ............................................2/30A5E00853911 ............................................2/30A5E00854188 ............................................2/12A5E00880382 ..........................................1/147A5E00880383 ..........................................1/147A5E00880384 ..........................................1/147A5E00880385 ..........................................1/147A5E00880386 ..........................................1/147A5E00881392 ..........................................1/186A5E00881393 ..........................................1/186A5E00881395 ..........................................1/186A5E00881396 ..........................................1/186A5E00881398 ..........................................1/186A5E00882121 ..........................................1/201A5E00891855 ..........................................1/186A5E01000694 ............................................2/48A5E01000740 ............................................2/48A5E01008972 ..........................................1/147A5E01009881 ............................................2/48A5E01009883 ............................................2/48A5E01009892 ............................................2/48A5E01009897 ...........................................2/48A5E01010033 ............................................2/48A5E01040312 ..........................................1/201A5E01040317 ..........................................1/201A5E01061561 ..........................................1/147A5E01075594 ............................................2/12A5E01090409 ............................................2/30A5E01090413 ............................................2/30A5E01132948 ............................................2/49A5E01132949 ............................................2/49A5E01132951 ............................................2/49A5E01132952 ............................................2/49A5E01132953 ............................................2/49A5E01143755001 ......................................2/12A5E01143755003 ......................................2/12A5E01143755004 ......................................2/12A5E01143755006 ......................................2/12A5E01267567 ............................................2/48A5E01714061 ............................................2/48A5E02091214 ............................................2/48A5E02091532 ............................................2/48A5E02183375 ............................................2/48

© Siemens AG 2016

6/19Siemens AP 01 · 2016 US Edition

AppendixArticle No. index

6

A5E02509347 ............................................ 2/48A5E02522036 ............................................ 2/48A5E02528048 ............................................ 2/48A5E02528052 ............................................ 2/48A5E02568437 ............................................ 2/48A5E02568457 ........................................... 2/48A5E02568463 ............................................ 2/48A5E02568465 ............................................ 2/48A5E02569944 ............................................ 2/48A5E02571180 ............................................ 2/48A5E02571184 ............................................ 2/48A5E02571186 ............................................ 2/48A5E02608594 ........................................... 2/48A5E02608597 ............................................ 2/48A5E02789535 ............................................ 2/48A5E03328473 ............................................ 2/48A5E03328474 ............................................ 2/48A5E03693426 ............................................ 2/12A5E03707235 .......................................... 1/208A5E03707236 .......................................... 1/208A5E03707240 .......................................... 1/208A5E03707757 .......................................... 1/208A5E03707918 .......................................... 1/208A5E03707919 .......................................... 1/208A5E03707920 .......................................... 1/208A5E03707921 .......................................... 1/208A5E03707925 .......................................... 1/208A5E03707941 .......................................... 1/208A5E03707942 .......................................... 1/208A5E03707943 .......................................... 1/208A5E03707968 .......................................... 1/208A5E03707969 .......................................... 1/208A5E03707970 .......................................... 1/208A5E03707971 .......................................... 1/208A5E03707986 .......................................... 1/208A5E03707987 .......................................... 1/208A5E03707988 .......................................... 1/208A5E03792459 .......................................... 1/201A5E31503119 ............................................ 2/48A5E33259745 ............................................ 2/48A5E34821625 ................ 1/22, 1/25, 1/28, 1/50,....................................... 1/53, 1/56, 1/66, 1/68,................................... 1/88, 1/91, 1/109, 1/116,............................... 1/128, 1/142, 1/155, 1/162,........................................... 1/174, 1/181, 1/195A5E34830928 ............................................ 2/48A5E34831050 ............................................ 2/48A5E34831075 ............................................ 2/48A5E34831078 ............................................ 2/48A5E34834296 ............................................ 2/48A5E34834297 ............................................ 2/48

C...C71121-Z100-A159 ................................... 1/74C71121-Z100-A159 ................................... 1/97C71121-Z100-A159 ................................ 1/131C71121-Z100-A159 ................................ 1/133C71121-Z100-A99 ..................................... 1/40C74121-Z100-A6 ....................................... 1/97C74121-Z100-A6 ..................................... 1/131C74121-Z100-A6 ..................................... 1/133C79000-B5200-C216................................. 1/40C79000-B5272-C216................................. 1/40C79000-B5276-C216................................. 1/40C79000-B5277-C216................................. 1/40C79000-B5278-C216................................. 1/40C79000-G5200-C143 ................................ 1/73C79000-G5200-C143 ................................ 1/96C79000-G5200-C143 .............................. 1/120C79000-G5272-C143 ................................ 1/73C79000-G5272-C143 ................................ 1/96C79000-G5272-C143 .............................. 1/120

C79000-G5276-C143.................................1/73C79000-G5276-C143.................................1/96C79000-G5276-C143...............................1/120C79000-G5277-C143.................................1/73C79000-G5277-C143.................................1/96C79000-G5277-C143...............................1/120C79000-G5278-C143.................................1/73C79000-G5278-C143.................................1/96C79000-G5278-C143...............................1/120C79121-Z100-A24 ....................................1/74C79121-Z100-A24 ....................................1/97C79121-Z100-A32 ...................................1/133C79121-Z100-A32 ....................................1/97C79121-Z100-A32 ..................................1/121C79127-Z400-A1 .......................................1/40C79165-A3042-B504 .................................1/74C79165-A3042-B505 ...............................1/121C79165-A3042-B506 .................................1/97C79165-A3042-B508 ...............................1/166C79165-A3044-B176 .................................1/74C79302-Z1210-A2 .....................................1/40C79302-Z1210-A2 .....................................1/74C79302-Z1210-A2 .....................................1/97C79302-Z1210-A2 ...................................1/121C79302-Z1210-A2 ...................................1/133C79402-Z560-T1........................................1/40C79402-Z560-T1........................................1/74C79402-Z560-T1........................................1/97C79402-Z560-T1......................................1/121C79402-Z560-T1......................................1/133C79402-Z666-E20......................................1/40C79451-A3008-B43 ...................................1/40C79451-A3008-B60 ...................................1/40C79451-A3040-D101 ...............................1/201C79451-A3040-D102 ...............................1/201C79451-A3040-D103 ...............................1/201C79451-A3040-D105 ...............................1/201C79451-A3040-D112 ...............................1/201C79451-A3040-D113 ...............................1/201C79451-A3040-D121 ...............................1/201C79451-A3040-D122 ...............................1/201C79451-A3277-B22 ................................1/121C79451-A3277-B535 ..........1/97, 1/121, 1/133C79451-A3277-B536 .....................1/97, 1/121C79451-A3277-B537 .....................1/97, 1/121C79451-A3277-B538 .....................1/97, 1/121C79451-A3458-B55 ...................................1/40C79451-A3460-B525 ...........1/97, 1/121, 1/133C79451-A3460-B526 .....................1/97, 1/121C79451-A3462-B151 .......................1/74, 1/97C79451-A3462-B152 .......................1/74, 1/97C79451-A3462-D501 ........................1/74, 1/97C79451-A3468-B515 .................................1/40C79451-A3468-B516 .................................1/40C79451-A3474-B605 .......................1/74, 1/97,..........................................1/121, 1/133, 1/147,......................................................1/167, 1/187C79451-A3474-B606 ...................1/121, 1/133C79451-A3478-C9 ............................1/74, 1/97C79451-A3480-B25 .....................1/121, 1/186C79451-A3480-C10 .............1/97, 1/121, 1/133C79451-A3480-C37 .......................1/97, 1/121C79451-A3480-D33 ...................................1/53C79451-A3480-D33 .................1/56, 1/88, 1/91

C79451-A3480-D511 ............. 1/50, 1/53, 1/56,............................................. 1/88, 1/91, 1/109, ......................................... 1/128, 1/142, 1/155, ....................................................... 1/74, 1/195C79451-A3480-D512 ..................... 1/50, 1/109C79451-A3480-D518 .................... 1/97, 1/121C79451-A3480-D519 ............................... 1/97C79451-A3480-D519 ............................. 1/121C79451-A3492-B605................................. 1/40C79451-A3494-B10................................... 1/40C79451-A3494-B11................................... 1/40C79451-A3494-B16................................... 1/40C79451-A3494-B33................................... 1/40C79451-A3494-D501 ................................ 1/40C79451-A3520-C5 ........................ 1/97, 1/121C79451-Z1589-U1.................. 1/22, 1/25, 1/28,...................................... 1/50, 1/53, 1/56, 1/66,.................................... 1/68, 1/88, 1/91, 1/109,.............................. 1/117, 1/128, 1/142, 1/155,............................... 1/162, 1/174, 1/191, 1/195

W...W75025-B5001-B1 ............... 1/74, 1/97, 1/121,.................................................... 1/133, 1/147, ..................................................... 1/167, 1/186W75040-B21-D80......................... 1/167, 1/186W75040-B31-D80......................... 1/167, 1/186W75041-E5602-K2 ................. 1/40, 1/74, 1/97,.................................................... 1/121, 1/133, ..................................................... 1/147, 1/167W75050-T1201-U101 ................................ 1/40W75054-T1001-A150 ..................... 1/74, 1/121W75083-A1004-F120 .......... 1/74, 1/121, 1/186W79054-L1010-T630.......... 1/71, 1/105, 1/128,......................................... 1/121, 1/133, 1/147,..................................................... 1/167, 1/186W79054-L1011-T100............ 1/74, 1/97, 1/121,.................................................... 1/133, 1/147, .................................................... 1/167, 1/186, W79054-L1011-T125................................. 1/40W79054-L1011-T160................................. 1/74W79054-L1011-T250............. 1/74, 1/97, 1/121

© Siemens AG 2016

6/20 Siemens AP 01 · 2016 US Edition

AppendixNotes

6

© Siemens AG 2016