catalog - gogatec kabelverschraubungen relais emv …€¦ · · 2017-02-07other manufacturers is...

2017 / 18

CATALOGSUCCESSFUL AUTOMATION

VIPA Elektronik-Systeme GmbH A-1130 Vienna, AustriaHietzinger Kai 85Phone: +43/1/895 93 63 – 0Fax: +43/1/895 93 63 – 50eMail: [email protected]

rene

rene

TABLE OF CONTENTS

2

VIPA - AUTOMATION PAGEVIPA SPEED7 Overview CPU-Modules 4 - 5

VIPA SPEED7 StUDIO 6

VIPA SLIO iMC7 7

VIPA SPEED7 CPU-Modules 8 - 9

VIPA SLIO terminals 10 - 14

SIGnAMAtIC EP800 IEC60870 remote control system 15

VIPA MICRO PLC 16

VIPA 300S CPUs with Instruction Set S7-300/S7-400 by SIEMEnS 17 - 19

VIPA 300V I/O-Units, CPs & Fieldbus 20

VIPA 300V Accessories 21

VIPA 200V Modular PLC-System 22 - 24

VIPA 100V Micro PLC-Compact System 25

VIPA General Accessories 26 - 27

VIPA teleservice 28

VIPA Safety with Samos Pro 29

VIPA tD/OP-textpanels 30

VIPA touch Panel Computers: Professional-Series 31

VIPA touch Panel Computers: ECO-Series 32

VIPA touch Panel Computers: Multi touch Series 33

VIPA touch Panel Computers: General 34

HILSCHER & VSCOM- COMMUNICATION PAGEHILSCHER Protocol Converters 35 - 36

HILSCHER Fieldbus Cards 36 - 37

VSCOM Protocol Converters & PC-Cards 38

rene

PLCSPEED7-TECHNOLOGY – compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

SPEED7 INCREASES THE PRODUCTIVITY OF YOUR PLANTS AND MACHINERY• Performance: Very fast processing and cycle times increase the output of machinery and

manufacturing plants• Interfaces: Onboard Ethernet, MPI, EtherCAt, PROFInEt, PROFIBUS-DP Master/Slave,

PtP serial RS485 interface and integrated CP 343/543 Ethernet

• Programming language: Programmable with StEP®7 by Siemens, tIA portal and SPEED7 Studio

• Standard SD Card: the SD card is used for backup, storage of program and data and also for running the CPU (the SD-Card is not necessary to run the CPU)

•Memory Management: Via VSC card it is possible to increase the work memory of the CPU up to 8MByte without changing the hardware

• Stock cost: Only a few of CPU types

4

TECHNICAL DATA SLIO 013C SLIO 014 SLIO 015 SLIO 017 SLIO IMC7

Work memory (50% program /50% data) 64-128kB 128-256kB 256-512kB 512kB - 2MB 256-512kB

Processingtime (Bit/Word/Fix-/ 20/20 20/120 10/60 10/60 10/60Floatingpoint in nanoseconds)

Number range: FB, FC, 8191DB 8191

Bit memory / Counter / Timer 8 8192 / 512 / 512 16kB / 2048 / 2048 8192 / 512 / 512

Local data loc. (per Prio class configurable) 1024Byte 4096Byte 1024Byte

I/O Adress area 1024 / 1024Byte 4096 /4096Byte 1024 / 1024Byte

Process image I/O 1024 / 1024Byte 4096 /4096Byte 1024 / 1024Byte

MPI max. Speed 12 MBd

Fieldbus: PROFIBUS-DP-Master integrated (under Developement) optional optional optional optional

Fieldbus: PROFIBUS-DP-Slave integrated optional optional optional optional optional

Fieldbus: PROFINET-Master integrated -- -- 4 4 --

Feldbus: ETHERCAT-Master integrated -- -- -- -- 4

PtP 4 4 4 4 4

PtP on PROFIBUS jack/MPI jack toggleable 4 4 4 4 4

Ethernet PG/OP-Port integrated/Connections 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4

Ethernet CP 343 integrated/Connections -- /-- -- /-- 4 / 8 4 / 24 -- /--ISOonTCP/ISO(H1)/S7/TCP/UDP Connections -- -- 8 24 (16) --

MOTION-axis integrated -- -- -- -- optional (4/8/16/20)

VIPA SPEED-BUS -- -- -- -- --

AE / AA / Pt100 2 / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

DE / DA / DEA’s 16 / 12 / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

Counter / PWM or Stepper (switchable) 4 (100kHz) / 2 (20kHz) -- / -- -- / -- -- / -- -- / --

Dimensions in mm: (W x H x D) 116,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5

SPEED7 is available world-wide. More than 60 VIPA branch offices offer service and support

rene

SPEED7-TECHNOLOGY – compatible SIEMENS S7-300®


PLC

SPEED-Bus Interfaces Memory management

• the patented and unique VIPA SPEED bus is available in select CPUs for very fast appli -cations.

• A clear competitive advantage for you and yourapplication.

• In addition to the MPI and PtP interfaces, an Ethernet-PG/OP interface is, of course, always available.

• this interface will remain our standard.

• Expand your work memory by inserting a VIPA MCC without changing the CPU.

• this will remain our standard.

• Because of the enormously powerful SPEED7 chipyou will find hardly any limitations in automationtechno logy.

• Powerful, flexible and very communicative.

• All 300S are programmable via SPEED7 Studio from VIPA or via tools of other manufacturers as wellas StEP®7 and tIA Portal by SIEMEnS.

• With VIPA, you decide which engineering toolyou want to apply!

• the mixture of VIPA modules with modules ofother manufacturers is of course possible.

• this also minimizes your warehousing costs. Just think about it!

Performance User friendly Compatible

5

TECHNICAL DATA 312SC 313SC 313SC/DPM 314SC/DPM 314ST/DPM 315SB/DPM 315SN/NET 315PN 317SE/DPM 317SN/NET 317PN

Work memory (50% program /50% data) 128kB -1MB 256kB -1MB 512kB -2MB 512kB -2MB 1MB -4MB 4MB -8MB

Processingtime (Bit/Word/Fix-/21/125 21/125 11/63 13/75 10/58

Floatingpoint in nanoseconds)

Number range: FB, FC, 2047 8191DB 4095 8191

Bit memory / Counter / Timer 8192 / 512 / 512 16K / 2K / 2K

Local data loc. (per Prio class configurable) 512Byte 8192Byte (configurable)

I/O Adress area 1024 / 1024Byte 2048 / 2048Byte 8192 / 8192Byte

Process image I/O 128 / 128Byte 8192 / 8192Byte

MPI max. Speed 187,5kBit 12 MBd

Fieldbus: PROFIBUS-DP-Master integrated -- -- 4 4 4 4 4 4 4 4 4

Fieldbus: PROFINET-Master integrated -- -- -- -- -- -- -- 4 -- -- 4

Feldbus: ETHERCAT-Master integriert -- -- -- -- -- -- -- -- -- -- --

PtP 4 4 4 -- -- -- -- -- -- -- --

PtP on PROFIBUS jack toggleable -- -- 4 4 4 4 4 4 4 4 4

PtP on PROFIBUS jack/MPI jack toggleable -- -- -- 4 -- -- -- -- -- -- --

Ethernet PG/OP-Port integrated/Connections 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4

Ethernet CP 343 integrated/Connections -- / -- -- / -- -- / -- -- / -- -- / -- -- / -- 4/ 32 4/ 32 -- / -- 4/ 32 4/ 32

ISOonTCP/ISO(H1)/S7/TCP/UDP Connections -- -- -- -- -- -- 8 8 -- 64 24

MOTION-axis integrated -- -- -- -- -- -- -- -- -- -- --

VIPA SPEED-BUS -- -- -- -- 4 -- -- -- 4 4 4

AI / AO/ Pt100 -- / -- / -- 4 / 2 / 1 4 / 2 / 1 4 / 2 / 1 4 / 2 / 1 -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

DI / DO/ DIO’s 16 / 8 / -- 24 /16 /-- 16 /16 /-- 24 / 16 / 8 8 / -- / 8 -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

Counter / PWM or Stepper (switchable) 2 (10kHz) 3 (30kHz) 3 (30kHz) 4 (60kHz) 4 (100kHz) -- -- -- -- -- --

Dimensions in mm: (W x H x D) 80x125x130 120x125x130 80x125x130 120x125x130 80x125x130 40x125x130 80x125x130

rene

SW010L1MA 0,-

SW010B1MA 333,-

SW010P1MA 777,-

SPEED7 STUDIOIntelligent + intuitive + open = instant entry

SPEED 7 Studio – the new VIPA engineering software, withwhich any SPEED7 controller can be programmed moreeconomically and efficiently.

The new intelligence of the hardware configuration, the intuitiveuser interface and the system openness make SPEED7 Studio thepowerful and easy-to-use tool. Optimize automation tasks, reducedevelopment costs to a minimum, and save time- and cost intensivesoftware training. The user can again focus on his actual engineer-ing tasks.SPEED7 Studio is systematically based on user friendliness. Every-thing has been freshly designed, from the hardware configuration,pogramming and networking to the parametrization of frequencyinverters and drives, and even visualization. All functions, propertiesand libraries are automatically prepared and displayed in the SPEED7Studio editor view. Unique SPEED7 tools make the software attractive and efficient. Highspeed applications are even more economic with the SPEED busfunctions. EtherCAT is fully integrated. The EtherCAT configuratorquickly and safely configures applications, automatically reads themand labels them with standard symbols. Integrated SLIO functiona-lities such as automatic calculation of power consumption andintegrated process image calculation, make SPEED7 Studio a highlyefficient tool that holistically integrates the SPEED7 product spectrum.

PLC

6

SPEED7 SOFTWARE PRICEOrder No.: Description in Euro

1x Software licence SPEED7 Studio LItE for projects up to 128kB, (up to 3 PCs)

1x Software licence SPEED7 Studio BASICfull version, unlimited memory, (up to 3 PCs)

1x Software licence SPEED7 Studio PROfull version, unlimited memory, Motion-Control(up to 3 PCs)

Highlights• Photorealistic Hardware-/Network-Configuration• Intuitive User Interface• Free Window Docking• Tool-Tips• Known S7-Programming Environment• VIPA-specific Blocks• Full integrated Visualization• WEB-Visualizationadditionally SPEED 7 STUDIO BASIC• SCADA-System MOVICONadditionally SPEED 7 STUDIO PRO• Motion-Control using PLCopen Standard• Intuitive Axes Configuration• CAM Editor

rene

015-CEFNR00 645,-

Speed7Studi o

955-0000000 50,-

FSC-C0ME040 349,-

FSC-C0NE040 649,-

FSC-C0PE040

VIPA

015

-CEF

NR00

YASKAWA and VIPA have laid the foundation for a new kind of automation technology.

The experiences of VIPA with PLC control technology have beencombined with those of YASKAWA in the field of motion contol. Theresult is the SLIO CPU iMC7, a PLC with integrated motion controlfunctions.EtherCAT is available for simple communication with the YASKAWAinverters and servo drives. The combination of the SPEED7 Studioengineering platform, the new Sigma-7 series and the iMC7 makesit possible to realize motion control tasks easily in a VIPA SPEED7controller.SPEED7 Studio provides a catalog of YASKAWA drives. This makesit possible to add these components to the fieldbus using a drag-and-drop function. Project planning also becomes much easier.With the motion control setup it is possible to define axes in themotion contol instructions. These axes are assigned to the servodrives and encoders, and the axis parameters are set. The CAMprofile editor allows complex movements to be divided into simple,sequential parts. These parts can be smoothly merged by enteringthe transitional conditions.

Motion control PLC:SLIO CPU iMC7• A CPU for standard and motion control applications• Fully integrated EtherCAT master• Proven SPEED7 technology for maximum takt rates• Isochronous operation and multi-axis applications via EtherCAT• Programmable with SPEED7 Studio by VIPA• Very flexible, modular system• Single-source solution for control and drive components• Compact design (W) 131,5 × (H) 109 x (D) 83 mm

SLIO– The smart I/O systemCPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

PLC

7

SPEED7 SLIO-CPUs PRICEOrder No.: Technical data in Euro

CPU 015-SPEED7 technology, DC 24V, incl. 256kByte (up to 512kByte),nVS-RAM, MPI-interface,SD-Slot, clock, Ethernet interface for PG/OPcommunication, RS485 interface with library for ASCII, StX/EtX, USS,3964R, ModbusRtU Master/Slave or MPI (switchable), RFC1006, tCP/IPand S7 communication for 8 connections, optional EtherCAt for 4/8/20 Motionaxes and PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.(W x H x D) 131.5 x 109 x 83mmHW identification: in Speed7Studio included

SPEED7 SLIO-CPUs PRICEOrder No.: MEMORY & FUNCTION EXTENSIONS in Euro

VIPA SD-Card standard (VSD), empty

FSC-EXTENSION CODE

EtherCAt MAStER + 256kByte + MC 4 axes

EtherCAt MAStER + 256kByte + MC 8 axes

EtherCAt MAStER + 256kByte + MC 20 axes on request

rene

TIASTEP®7

013-CCF0R00 495,-

1

2

3

RAM64

RAM128

RAM256

RAM512

RAM1024

RAM1536

VIPA

013

-CCF

0R00

Reference:SIEMEnS

318

SIEMEnS SIEMEnS SIEMEnS VIPA SIEMEnS SIEMEnS VIPA VIPA VIPA VIPA SIEMEnSS7 1214 S7 318-2 S7 151-8 SLIO 014 S7 317-2FPn/DP S7 317-2Pn/DP SLIO 015 315(7)Sn/Pn SLIO 013 SLIO 017 319-3Pn/DP

CPU 013C 014 015 017 iMC7


CPU 014-SPEED7 technology, DC 24V, incl. 64kByte (up to 128kByte), nVS-RAM, MPI-interface, SD-Slot, clock, 16 DI, 12 DO, 24 VDC/0,5A, 2 AI, 4x counter (100kHz), 2x PWM (20 kHz),Ethernet interface for PG/OP communication, RS485 interface with libraryfor ASCII, StX/EtX, USS, 3964R, ModbusRtU Master/Slave or MPI (switchable), optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line. (W x H x D) 116.5 x 109 x 83mmHW identification: 6ES7314C-2 Pn/DP + 6GK343-1EX30-0XE00


PLC

8

Memory extension

Fieldbus

SPEED7 BY VIPA – VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs

rene

TIASTEP®7

014-CEF0R01 395,-

015-CEFPR01 595,-

017-CEFPR00 995,-

955-0000000 50,-

955-C000M00 200,-

955-C000S00 75,-

955-C000020 90,-

955-C000M20 290,-

955-C000S20 165,-

955-C000030 135,-

955-C000M30 335,-

955-C000S30 210,-

955-C000040 180,-

955-C000M40 380,-

955-C000S40 255,-

955-C0ME040 349,-

955-C0NE040 649,-

955-C0PE040

955-C000050 390,-

955-C000M50 590,-

955-C000S50 465,-

955-C000060 590,-

955-C000M60 790,-

955-C000S60 665,-

955-C000070 790,-

955-C000M70 990,-

955-C000S70 865,-

VIPA

014

-CEF

0R01

VIPA

015

-CEF

PR01

VIPA

017

-CEF

PR00

TIASTEP®7

TIASTEP®7


PLC


CPU 014-SPEED7 technology, DC 24V, incl. 128kByte bis 256kByte, NVS-RAM, MPI-interface, SD-Slot, clock, Ethernet interface for PG/OP communication, RS485 interface with libraryfor ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable), optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line. (W x H x D) 131.5 x 109 x 83mmHW identification: 6ES7315-2EH14-0AB0 + 6GK343-1EX30-0XE00

CPU 015-SPEED7 technology, DC 24V, incl. 256kByte (up to 512kByte), NVS-RAM, MPI-interface,SD-Slot, clock, Ethernet interface for PG/OP communication, RS485 interface with libraryfor ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable),RFC1006, TCP/IP and S7 communication for 8 connections, PROFINET- & optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.(W x H x D) 131.5 x 109 x 83mmHW identification: 6ES7315-2EH14-0AB0 + 6GK343-1EX30-0XE00

CPU 015-SPEED7 technology, DC 24V, incl. 512kByte (up to 2MByte), NVS-RAM, MPI-interface,SD-Slot, clock, Ethernet interface for PG/OP communication, RS485 interface with libraryfor ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable),RFC1006, TCP/IP and S7 communication for 8 connections, PROFINET- & optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.(W x H x D) 131.5 x 109 x 83mmHW identification: 6ES7317-2EK14-0AB0 + 6GK343-1EX30-0XE00

SPEED7 SLIO-CPUs PRICEOrder No.: MEMORY & FUNCTION EXTENSIONS in Euro

VIPA SD-Card standard (VSD), empty

FSC-EXTENSION CODE

PROFIBUS MASTER

PROFIBUS SLAVE

64kByte

PROFIBUS MASTER + 64kByte

PROFIBUS SLAVE + 64kByte

128kByte



256kByte



EtherCAT MASTER + 256kByte + MC 4 axes

EtherCAT MASTER + 256kByte + MC 8 axes

EtherCAT MASTER + 256kByte + MC 20 axes on request

512kByte



1024kByte



1536kByte



9

rene

SLIO– The smart I/O systemBus Terminals

INTERFACE-MODULE (IM)the space-saving Interface-Module represents the interface betweenprocess level and bus system. All control signals are transmitted tothe Electronic Module through the internal backplane bus.

• Supports various fieldbus systems• Exchangeable Power Module, easy-to-maintain• Functional DIP-switch for address setting for PROFIBUS-DPand CAnopen with transparent cover

• IP addressing in clear text on the front• Potential decoupling between fieldbus and input/output level • Up to 64 Signal and Function Modules per Interface Module

SIGNAL-MODULE (SM)Electronic Module for connection of sensors and actuators, registration ofdigital and analog signals in and out of the process.• Direct allocation and monitoring of channel states via status LEDs • Secure and time-saving installation due to terminal assignment on themodule

• Item designation will remain unchanged in case of module exchange • Individual labelins of channels with blank strips

FUNCTION-MODULES (FM)Electronic Module for realization of automation requirements, e.g. fastcounting. For measuring and positioning the following function moduleswill complement the SLIO® system in the future:

• SSI-Module • Counter-Module • Others in preparation

POWER-MODULE (PM)Power Module for refreshing of backplane bus power. the double-component-design ensures easy maintenance due to the separation of electronics fromthe terminal Module.

• Decoupling of potential groups• Voltage supply on sensor/actuator level• Mounting security due to reverse-connect and overvoltage protection

EASY INSTALLATION AND MAINTENANCE• two-component modules with terminal Module and Electronic Modulefor easy maintenance

• Easy mounting due to plug-in mechanism• Click-connection for fast mounting of shield connection• Protection against wrong combination of terminal- and

Electronic-Modules per encoding

CLEVER ANDUSER-FRIENDLY LABELLING• Status-LEDs with direct allocation on the labelins strip• terminal assignment and connection diagrams on each module• Item designation will remain unchanged in case of module exchange• Blank strips for individual labeling of modules

CLEAR STATUS MONITORING AND DIAGNOSIS• Indication of diagnosis and channel states via LEDs• Clear allocation and indication of channel states• Secure and time-saving installation and maintenance through terminalassignment printed on the module

PERFORMANCE-ORIENTED BACKPLANE BUS• One terminal Module for all Signal and Function Modules• transmission rate 48Mbit/s• Fast response time of 20µs upwards• Detailed diagnosis of each Electronic Module in the system

SPACE AND TIME-SAVING CONNECTION TECHNOLOGY• Space-saving staircase-shaped wiring with cage clamps• Quick pre-wiring due to separate installation level• Easy module exchange due to standing wiring• High modularity due to 2, 4 and 8 channel modules

Demand for a more compact and flexible automationsolutions with a reasonable price-performance ratiohas been constantly increasing. With the developmentof the completely new I/O system SLIO®, VIPA is settinga new standard in the automation sector.The VIPA I/O system SLIO combines high functionalitywith an intelligent mechanical concept and an extremelycompact design.SLIO® is a synonym for slice-I/O. With its very compactdesign, the system can be set-up “step by step” toexactly meet the requirements of the application.The Interface Modules (IM) for PROFIBUS-DP, CANopen,PROFINET, EtherCAT and Modbus can support up to64 Electronic Modules (EM).The Power Modules (PM), which are contrasting incolor to Signal Modules (SM) and Function Modules(FM), supply voltage to the Electronic Modules. Decoupled potential groups can be defined if required.The Electronic Modules are connected to the Terminal

ModuleTM using a secure plug-in mechanism. TheTerminal Module is comprised of a clamp, connectionof Electronic Modules and mechanical bus connector.Therefore, if maintenance or repair are required, onlythe Electronic Module will have to be exchanged bysimply pulling it out of the Terminal Module. Wiringand mounting on the 35mm DIN rail will remainunchanged.The staircase-shaped cage, which clamps on theTerminal Module offers fast, clear, and secure wiring.With the integrated status-LEDs and the labeling stripon the front, an exact state monitoring of channelson the Electronic Module is possible.The new backplane bus system with a transmissionrate of 48Mbit/s offers very short response timeswith a signal processing of less than 20µs.SLIO® is one of the most powerful and cost-effectivedecentralized systems available in the market.

PLC

1 DC 24V for powersec tion supply I/O area(max. 10A via0AA00/1AB00)

2 DC 24V for electronicpower supply buscoupler

3 DC 24V for powersection supply I/O area(max. 4A via 1AB10)

4 DC 24V for electronicpower supply buscoupler

10

rene

050-1BA00 169,-

050-1BA10 169,-

050-1BB00 169,-

050-1BB30 127,-

050-1BB40 169,-

050-1BS00 180,-

054-1BA00 246,-

054-1CB00 246,-

054-1DA00 204,-

040-1BA00 209,-

040-1CA00 209,-

053-1CA00 136,-

053-1DN00 136,-

053-1DP00 136,-

053-1PN00 204,-

053-1EC00 116,-

053-1MT00 136,-

053-1IP00 170,-

060-1AA00 101,-

061-1BA00 163,-

001-1BA00 17,-

001-1BA10 17,-

001-1BA20 17,-950-0KD30 17,-

290-1AF00 54,-

290-1AF30 18,-

000-0AB00 10,-007-1AB00 17,-

007-1AB10 113,-

FUNCTIONS-MODULESINCL. 001-0AA00 TERMINAL MODULE PRICE

Order No.: Name / Technical data in Euro

FM 050 - Counter module / Counter 1x32Bit (AB), DI 24VDC, up to 100kHz,DO 1x 24VDC/0,5A, Gate-, Latch-, Reset-Connector, Alarm, Diagnose

FM 050 - Counter module/Counter 1x32Bit (AB), DI 5VDC, up to 500kHzDifferential signal, Reset-Connector, Alarm, DiagnoseFM 050 - Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 100kHzAlarm, Diagnose

FM 050 - ECO Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 100kHz

FM 050 - Counter module/Frequenz 2x24Bit (AB), DI 24VDC, up to 600kHz

FM 050S - SSI-Modul / 1xSSI, RS422, 24/32 Bit, 100/300/600kBit/s

MOTION-MODULESINCL. 001-0AA00 TERMINAL MODULE PRICE


FM 054 - stepper module / 1-channel with feedback, 2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz,step pattern 64-times microstepping

FM 054 - DC-motor module / 2-channel with feedback, 2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC, PWM clock frequency 32 kHz

FM 054 - Pulse train output module / 1-channel RS422 with feedback,2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz

COMMUNICATION-MODULESINCL. 001-0AA00 TERMINAL MODULE PRICE


CP 040 - Communication processor, RS232 interface Communication: ASCII, 3946R, ModbusRtU/ASCII (Master/Slave,short/long) lenth of telegram: max. 250Byte, up to 250 telegrams receive-/send buffer: 1024Byte

CP 040 - Communication processor, RS422/485 interface,Communication: ASCII, 3946R, ModbusRtU/ASCII (Master/Slave,short/long) lenth of telegram: max. 250Byte, up to 250 telegrams receive-/send buffer: 1024Byte

FUNCTION-MODULES (FM)Electronic Module for realization of automation requirements,e.g. fast counting. For measuring and positioning thefollowing function modules will complement the SLIO®

system in future:

• SSI-Module

• Counter-Module

• Others in preparation


INTERFACE-MODULE (IM)the space-saving Interface-Module represents the interface betweenprocess level and bus system. All control signals are transmitted tothe Electronic Module through the internal backplane bus.

• Supports various fieldbus systems

• Exchangeable Power Module, easy to maintain

• Functional DIP-switch for address setting for PROFIBUS-DP, PROFInEtand CAnopen with transparent cover

• IP addressing in clear text on the front

• Potential decoupled between fieldbusand input/output level

• Up to 64 Signal and Function Modulesper Interface Module

INTERFACE-MODULESINCL. 007-0AA00 POWER-MODULE PRICE


IM 053CAn / CAnopen-Slave, max. PB (parameterbytes): 128

IM 053Dn / Devicenet-Slave, max. PB (parameterbytes): 256

IM 053DP / PROFIBUS-DP-Slave, max. PB (parameterbytes): 244

IM 053Pn / PROFInEt-IO slave transfer rate 100MBd, PB: 512

IM 053EC / EtherCAt-slave transfer rate 100MBd, PB: 4kB

IM 053nEt / Modbus-/tCP/IP slave, adjustable I/O cycle 0.5..4msec

IM 053Mt / Ethernet/IP-Slave, PB (Parameterbytes): 512

IM 060 / Line Extension, Master

IM 061 / Line Extension, Slave

POTENTIAL DISTRIBUT0R-MODULESMAX. TERMINAL CURRENT 10A PRICE

Order No.: Name / Technical data in EuroPotential distributor module 24V/8xDC +24V clamps

Potential distributor module 24V/8xDC 0V clamps

Potential distributor module 24V/4xDC +24V and 4xDC 0V terminalsPOTENTIAL DISTRIBUTOR-MODULES PRICE

Order No.: Name in Euro

SLIO Line Extension Cable, length: 2m, 2x RJ45

35 mm Alu DIn-Profile Rail, Length: 2000mm

35 mm Alu DIn-Profile Rail, Length: 530mm

SLIO Shield Bus Carrier, 10 pieces

POWER-MODULESINCL. 001-0AA00 TERMINAL-MODULE PRICE


Power Supply connection module, DC 24V, max. 10A

Power Supply connection module, DC 24V, max. 4Awith integrated power supply 5V/2A for the internal electronics

PLC

11

rene

021-1BB00 22,-

021-1BB50 28,-

021-1BD00 28,-

021-1BD40 30,-

021-1BD50 30,-

021-1BF00 44,-

021-1BF01 49,-

021-1BF50 44,-

021-1DF00 68,-

021-1BB10 81,-

021-1BD10 133,-

021-1SD00 165,-

022-1SD00 187,-

021-1BB70 95,-

022-1BB70 101,-

021-1BD70 149,-

022-1BD70 165,-

022-1BB00 27,-

022-1BB50 32,-

022-1BB20 44,-

022-1HB10 42,-

022-1HD10 64,-

022-1BD00 38,-

022-1BD50 38,-

022-1BD20 48,-

022-1BF00 48,-

022-1BF50 48,-

022-1DF00 75,-

022-1BB90 130,-

SIGNAL-MODULES DIGITAL INPUT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 021 - Digital input / DI 2xDC 24V

SM 021 - Digital input / DI 2xDC 24V, nPn


SM 021 - Digital input / DI 4xDC 24V (4x2/3--wire)



SM 021 - Digital input / DI 8xDC 24V, 0,5 ms


SM 021 - Digital input / DI 8xDC 24V, wiring diagnosis

Digital input SM 021, DI 2 x speed inputs, input filter time delay parameterized 2μs ... 4ms, PB: 9

Digital input SM 021, DI 4 x fast inputs, input filtertime delay parameterized 2μs ... 4ms, PB: 11

SIGNAL-MODULES DIGITAL OUTPUT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 022 - Digital output / DO 2xDC 24V, 0,5A

SM 022 - Digital output / DO 2xDC 24V, 0,5A, nPn

SM 022 - Digital output / DO 2xDC 24V, 2A

SM 022 - Digital output / DO 2xDC 30V/AC 230V, 3Arelays, potential decoupled per channel

SM 022 - Digital output / DO 4xDC 30V/AC 230V, 1,8Arelays, potential decoupled per channel



SM 022 - Digital output / DO 4xDC 24V, 2A



SM 022 - Digital output / DI 8xDC 24V, 0,5A, wiring diagnosis

SM 022 - PWM - Digital output / DO 2xDC 24V, 0,5A, max. 40kHz, PB: 12

SIGNAL-MODULE (SM)Electronic Module for connection of sensors and actuators, registrationof digital and analog signals in and out of the process.

• Direct allocation and monitoring of channel status via state LEDs

• Secure and time-saving installation due to terminal assignment onthe module

• Item designation will remain unchanged in case of module exchange

• Individual labeling of channels with blank strips

PLCSLIO– The smart I/O systemBus Terminals

SPACE AND TIME-SAVING CONNECTION TECHNOLOGY• Space-saving staircase-shaped wiring with cage clamps• Quick pre-wiring due to separate installation level• Easy module exchange due to standing wiring• High modularity due to 2, 4 and 8 channel modules

THE SAFETY MODULES FOR SLIO:• 4-channel or 2-channel inputs and outputs for higher Safety requirements (SIL3)

• Digital signals: 24 V• Used Safety protocol: PROFIsafe for PROFIBUS and PROFInEt• Up to 4095 Safety modules in an equipment possibly• Safe parameters: Input delay, change-over between one andtwo channel analysis, channel activation a.s.o.

• Response times <10 ms• Registration to SIL3 (Safety Integrity level) and PL e (performance level)

SAFETY-MODULESINCL. 001-0AA00 TERMINAL MODULE PRICE


SM 021 - SAFEtY Digital input / DE 4xDC 24V, PB: 44

SM 022 - SAFEtY Digital output / DA 4xDC 24V/0,5A, PB: 44

12

ETS SIGNAL-MODULES DIGITALINCL. 001-0AA00 TERMINAL MODULE PRICE


EtS Digital input SM 021, DI 2 x 24VD, PB: 10EtS-Buffer: 15 time stamps, time resolution: 1μsec

EtS Digital output SM 022, DO 2 x 24VDC/0,5A, PB: 6 EtS-Buffer: 15 time stamps, time resolution: 1μsec

EtS Digital input SM 021, DI 4 x 24VDC, PB: 12 EtS-Buffer: 15 time stamps, time resolution: 1μsec

EtS Digital output SM 022, DO 4 x 24VDC/0,5A, PB: 6EtS-Buffer: 15 time stamps, time resolution: 1μsec

ETS TIMESTAMP SYSTEMThere are digital input and output modules with ordermemory (FIFO) available to buffer the signal edges. Theseterminals are marked with the abbreviation ETS (EdgeTimestamp System). SLIO ETS offers a temporary signifi-cantly improved exactness at the µs area for all supportedfieldbus systems.

rene

031-1BB10 126,-

031-1BB30 126,-

031-1BB40 126,-

031-1BB60 126,-

031-1BB70 126,-

031-1BD30 136,-

031-1BD40 136,-

031-1BD70 136,-

031-1BF60 164,-

031-1BF74 164,-

032-1BB30 134,-

032-1BB40 134,-

032-1BB70 134,-

032-1BD30 144,-

032-1BD40 144,-

032-1BD70 144,-

032-1CB30 162,-

032-1CB40 162,-

032-1CB70 162,-

032-1CD30 170,-

032-1CD40 170,-

032-1CD70 170,-

031-1CB30 148,-

031-1CB40 148,-

031-1CB70 148,-

031-1CD30 158,-

031-1CD35 158,-

031-1CD40 158,-

031-1CD45 158,-

031-1CD70 158,-

031-1BD80 192,-

031-1LD80 192,-

031-1BB90 165,-

031-1LB90 165,-

031-1CA20 235,-

PLC

SIGNAL-MODULES ANALOG INPUT 12BIT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mAsupply 2x 35mA for 2x 2-wire sensors integrated, PB: 15

SM 031 - Analog input / AI 2x12Bit, 0 - 10V, PB: 6

SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, PB: 6

SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, sensor, PB: 6

SM 031 - Analog input / AI 2x12Bit, -10V ... +10V, PB: 6



SM 031 - Analoge input / AI 4x12Bit, -10V ... +10V, PB: 8


SM 031 - Analoge input / AI 8x12Bit, -10V ... +10V, PB: 10

SIGNAL-MODULES ANALOG OUTPUT 12BITINCL. 001-0AA00 TERMINAL MODULE PRICE


SM 032 - Analog output / AO 2x12Bit, 0 - 10V, PB: 8

SM 032 - Analog output / AO 2x12Bit, (0) 4 - 20mA, PB: 8

SM 032 - Analog output / AO 2x12Bit, -10V ... +10V, PB: 8



SM 032 - Analog output / AO 4x12Bit, -10V ... +10V, PB: 10

SIGNAL-MODULES ANALOG INPUT 16BIT INCL. 001-0AA00 TERMINAL MODULE PRICE










SM 031 - Analog input / AI 4x16Bit, R, RtD (2x3/4-wire),Pt100/Pt1000, ni100/ni1000, 0 - 3000 Ohm, PB: 34

SM 031 - Analog input / AI 4x16Bit, R, RtD (2x3/4-wire),Pt100/Pt1000, ni100/ni1000, 0 - 3000 Ohm, PB: 12

SM 031 - Analog input, AI 2x16Bit, tC (-80mV..+80mV), thermocouplertyp B, C, E, J, K, L, n, R, S, t, PB: 22terminal Module 001-0AA20 with temperature compensation included

SM 031 - Analog input, AI 2x16Bit, tC (-80mV..+80mV), thermocouplertyp B, C, E, J, K, L, n, R, S, t, PB: 10terminal Module 001-0AA20 with temperature compensation included

SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bitauto/self calibration, parallel operation of load cells, onboard power supply 2,5V, 5V, 7,5V, 10V, 12V

SIGNAL-MODULES ANALOG OUTPUT 16BITINCL. 001-0AA00 TERMINAL MODULE PRICE









13

SIGNAL MODULES ANALOGSignal modules (SM) to connecting sensors and actuatorsare the interfaces of the system to the process. Analogsignal modules acquire the analog control signals (e.g.measurement data) to and out of the process level.Depending on the application and type the control signalsare acquired from the process level and converted intointerpretable signals for controlling. Analog output modulesconvert the internal control signals into signals suitablefor the process level.

A variety of different analog signal modules accuratelyprovide the inputs and outputs that are required for eachtask. The analog modules differ in the number of channels,voltage and current ranges, isolation, and diagnostic andalarm capability.

CHARACTERISTICS• 2 or 4 channel with 12 bit or 16 bit resolution

• Functions of the inputs / outputs programmable

• Most various assemblies, suitable for measuringtransducers (current/voltage, resistance or temperaturesensors)

• Direct mapping and readability of the channelconditions via status LEDs

• Safe and time-saving installation by the terminalassignment mounted on the module

• When changing the module equipment identification(BMK) is retained on the TM

• Individual single-channel lettering on insertion strip

rene

054-1BA00 246,-

054-1CB00 246,-

054-1DA00 204,-

031-1CA20 235,-

031-1PA00 235,-

RS422

PLCSLIO– The smart I/O systemBus Terminals

14

MOTION-MODULESINCL. 001-0AA00 TERMINAL MODULE PRICE


FM 054 - stepper module / 1-channel with feedback, 2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz,step pattern 64-times microstepping

FM 054 - DC-motor module / 2-channel with feedback, 2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC, PWM clock frequency 32 kHz

FM 054 - Pulse Train Output Module / 1-channel RS422 with feedback,2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz

DMS-MODULEINCL. 001-0AA00 TERMINAL MODULE PRICE


SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bitauto/self calibration, parallel operation of load cells, onboard power supply 2,5V, 5V, 7,5V, 10V, 12V

ENERGYMEASURE-MODULEINCL. 001-0AA00 TERMINAL MODULE PRICE


SM 031 - Energymeasure-Module, 1/3-phase, 230/400VACresolution measured value 24 bit, avialable measurement: active energy, temperature, frequency, voltage RMS, current RMS,active power, reactive power, apparent power, cos phi, harmonic voltage RMS, harmonic current RMS

SLIO DMS-ModulesThe SLIO DMS modules allows direct connectionof a resistor full bridge (DMS) or load cell in the4- or 6-wire connection. Power supply alreadyintegrated.

Typical fields of applications• Filling level monitoring of silotanks and bunkers

• Measuring and determination of rope and crane loads

• Force measuring, Container scales,Platform scales, Crane scales

STEPPER ModuleOperating types• Reference• Positioning• Speed control

PulseTrain moduleOperating types• Reference• Positioning• Speed control

DC-Motor moduleOperating types• Reference• Positioning• Speed / torque control

SLIO Energiemess-ModulThe module allows the measurement of electric data forcounting energy and power measurement. Here, the voltagemeasurement of each phase is directly measured and thecurrent is measured indirectly via current transformers. Inconsideration of the permissible total current, you can alsoperform an energy measurement on devices, which arewithin the same phase.

• 3-phase and neutral wires 230/400V 1A• Retentive storage of the energy values• Diagnostic function• Resolution of the measured value 24bit• The following measurements can be found in 4-quadrantoperation:– Voltage, current– Electrical power– Electrical work– Harmonics– Phase shift cos phi– Frequency

rene

VIPA 953-1LE00 98,-VIPA 953-1LF00 147,-VIPA 953-1LG00 217,-VIPA 953-1LH00 309,-VIPA 953-1LJ00 488,-VIPA 953-1LK00 731,-VIPA 953-1LL00 1.023,-VIPA 953-1LM00 1.509,-VIPA 953-1LP00 2.240,-

VIPA

312

SCVI

PA 3

13SC

VIPA

313

SC/D

PMVI

PA 3

14SC

/DPM

VIPA 953-0KX10 € 122,-

VIPA 312-5BE23 505,-

VIPA 313-5BF23 746,-

VIPA 313-6CF23 1.010,-

VIPA 314-6CG23 1.370,-

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

MEMORY CONFIGURATION CARD PRICEOrder No.: Additional memory extension: in Euro

32kByte (16kByte program/16kByte data)

64kByte (32kByte program/32kByte data)128kByte (64kByte program/64kByte data)256kByte (128kByte program/128kByte data)512kByte (256kByte program/256kByte data)1MByte (512kByte programm/512kByte data)2MByte (1MByte programm/1MByte data)4MByte (2MByte program/2MByte data)8MByte (4MByte program/4MByte data)

All cards have a minimum capacity of 512MByte and can be usedadditional for programm backup.

PLC

VIPA CPUs and peripheral modules with the instructionset S7-300® by Siemens are more than 20 times fasterthan the similar S7-300® products. VIPA offers SPEED7,the technology of tomorrow, based on a million timesproven STEP®7-programming platform. A flexible memorymanagement covers all possible applications from 64kByteto 1MByte. Program and data are stored in one memory,no extra loading memory is necessary. A pluggableMMC/SD-Card-Card allows configuration as well as projectand data saving in a FAT16 format compatible with PC.

Ethernet for PG communication, online maintenance andOP communication are always on Board (PtP). The wellknown serial system bus from the S7-300® series bySIEMENS is completely supported and allows the use ofthe S7-300® units of SIEMENS and VIPA. All importantcertifications exist. The complete STEP®7/S7-300®

command set is available and was tested for fullaccuracy, examined from an independent Test institutein extensible test rows.

SPEED7-CPUs PRICEOrder No.: Technical data in Euro

CPU 312SC-SPEED7 technology DC 24V, incl. 128kByte (up to 1MByte),MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 8DO 24VDC/0,5A, 2x counter (10Khz) RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication.HW identification: 6ES7312-5BE03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 313SC-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A, AI 4x12Bit(U/I), 1x12Bit(Pt100), AO 2x12Bit(U/I), 3x counter (30Khz), RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication.HW identification: 6ES7313-5BF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 313SC/DPM-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 16DO 24VDC/0,5A, 3x counter (30Khz), PROFIBUS-DP master/slaves with 12Mbps and up to 125 slaves, alternative RS485 interface with library for ASCII, StX/EtX, 3964R,Modbus master protocols, Ethernet interface for PG/OP communication.HW identification: 6ES7313-6CF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 314SC/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2MByte),MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A+8 DI/O in adition, AI 4x12Bit(U/I), 1x12Bit(Pt100), AA 2x12Bit(U/I), 4x counter (60Khz),PROFIBUS-DP master/slave with 12Mbps and up to 125 slaves, alternative RS485interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols,Ethernet interface for PG/OP communication.HW identification: 6ES7314-6CG03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

MCC-MEMORY CONFIGURATION CARDVIPA MCC offers the possibility to extend the RAM ofSPEED7 CPUs. The MCC is a specifically prepared MMC(multimedia Card). Plug the MMC into the card slot andexecute an overall reset and the extension becomesavailable. The MCC must remain plugged in, otherwisethe CPU switches to STOP after 48 hrs.

The MCC can’t be exchanged to a MCC with the samememory configuration, but it can be used for the projectbackup (Copy RAM > ROM). The shown MCC memoryvalue increases the already available basic memory ofthe CPU by the value of the card. However, the maximummemory shown of the CPU can’t be overridden, even if abigger memory extension is plugged in.




MMC flashcard, 512MByte, only forprogram back up, recommended ifno MCC-Card is used.

17

rene

VIPA

315

SNVI

PA 3

15SB

VIPA 314-2BG23 513,-

VIPA 314-2AG23 922,-

VIPA 315-2AG23 1.278,-

VIPA 315-4NE13 1.834,-

VIPA 315-4PN23 1.834,-

VIPA 315-4PN43 997,-

80mm

125mm

120mm

40mm

125mm

120mm

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7



VIPA CPUs and peripheral modules with instruction set S7-300®/S7-400® by Siemensare faster than the currently strongest S7-300®, S7-400® systems. VIPA offersSPEED7, the technology of tomorrow, based on a million times proven STEP®7-programming platform. A flexible memory management covers all possible appli-cations from 64kByte to 8MByte. Program and data are stored in one memory, sono extra loading me mory is necessary. A pluggable MMC/SD-Card allows configu-ration as well as project and data secu rity in a FAT16 format compatible with PC. PROFIBUS-DP master or optional master CANopen and Ethernet for PG communi-cation, on-line maintenance and OP communication are al ways on Board (PtP).

In addition, an EthernetCP is able to become in tegrated directly into the CPU cabinet,compatible with CP343, 10/100Mbps.The well known serial system bus from the S7-300® series by Siemens iscompletely supported and allows the use of the S300® units of SIEMENS and VIPA.Not only are 8 modules able to be switched on, but also the CPUs support to driveup to 32 modules in a line. All relevant certifications exist. The complete STEP®7/S7-300®/400®er commandset is available and has been examined by an independent test institute inextensible test rows to ensure complete accuracy.

SPEED7-CPUs PRICEOrder No.: Technical data in Euro

CPU 314SE/DPS-SPEED7 technology, DC 24V, incl. 256kByte (up to 1MByte), MPI-interface, SD-slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP-Slave or RS485, PtP-Communication for ASCII-, StX/EtX-, 3964R-, ModbusRtU master protocol with library. 32 I/O-units per lineHW identification: 6ES7315-2AG10-0AB0/V2.6 + 6GK343-1EX11-0XE00

CPU 314SB/DPM-SPEED7 technology, DC 24V, incl. 512kByte (up to 1MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 315SB/DPM-SPEED7 technology, DC 24V, incl. 1MByte (up to 4 MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 315Sn/nEt-SPEED7 technology, DC 24V, 1MByte (up to 2 MByte),MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, add. integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

315Sn/nEt-SPEED7 technology, DC 24V, incl. 1MByte (up to 2 MByte),MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFInEt- & PROFIBUS-DP master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. 32 I/O-units per lineHW identification: 6ES7315-2EH13-0AB0 + 6GK343-1EX11-0XE00

315Sn/nEt-SPEED7 technology, DC 24V, incl. 512kByte, MPI interface,SD slot, clock, Ethernet interface for PG/OP-Communication, PROFInEt-master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols. 32 I/O-units per lineHW identification: 6ES7315-2EH13-0AB0 V2.6 + 6GK343-1EX11-0XE00


PLC

18

rene

VIPA 314-6CF23 1.329,-

VIPA 317-2AJ23 1.988,-

VIPA 317-4NE23 3.060,-

VIPA 317-4PN23 3.060,-

VIPA 342-1CA70 763,-

VIPA 342-1DA70 814,-

VIPA 342-1IA70 814,-

VIPA 342-2IA71 1.432,-

VIPA 343-1EX71 1.103,-

VIPA 321-1BH70 195,-

VIPA 322-1BH70 216,-

VIPA 323-1BH70 238,-

VIPA 331-7AF70 693,-

VIPA 331-7BF70 693,-

VIPA 307-1FB70 161,-

VIPA 391-1AF10 142,-

VIPA 391-1AF30 171,-

VIPA 391-1AF50 193,-

VIPA 391-1AJ10 142,-

VIPA 391-1AJ30 171,-

VIPA 391-1AJ50 193,-

VIPA

317

SN

VIPA

314

STVI

PA 3

22-1

BH70

VIPA

342

-1CA

70

VIPA

343

-1EX

71

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

SPEED BUS PERIPHERAL MODULES PRICEOrder No.: Technical data in Euro

Speed bus, CAnopen master RS485, 320 Bytes, up to 127 CAn knots.

Speed bus, PROFIBUS-DP master RS485, 12 MBaud, up to 125 Slaves.

Speed bus, interbus master, RS422, Dual port master,up to 512 subscribers, number of the process data: In 1920 binary I/Os.

Speed bus, 2x interbus master, 2x RS422, Dual port master,up to 512 subscribers, number of the process data: In 1920 binary I/Os.

SPEED-Bus, CP343S tCP/IP-Ethernet CP, S7 communication, RFC1006, H1, tCP/IP, UDP, up to 16 connections.

SM 321S-FASt SPEED-Bus, digital input DI 16xDC 24V, 2,56µs to 40ms adjustable.

SM321S-FASt SPEED-Bus, digital output tH 16x DC 24 V, 0.5A, 100kHz

n.M. 321S-FASt speed bus, digital input DI/O 16xDC24V, digital output DO0,5A, 100 kHz, 2.56 µs to 40ms adjustable.

SM 331S-FASt SPEED-Bus, analog supported input AI 4x16Bit, 100µsec per channel,+/- 20mA, adjustable 32 kByte cache memories per channel after trigger.

n.M. 331S-FASt speed bus, analog input AI 8x16Bit, 100 µs per channel,+/-10 V, adjustable 32 kByte cache memory per channel after trigger.

SPEED BUS POWER SUPPLY

PS307 power supply unit, only for SPEED-BUS units,Input:110...240VAC, Output: 24VDC, 6...12A

Order No.: SPEED BUS PROFILE RAILSPRICEin Euro

530 mm for 2 high-speed extension slots






SYSTEM COMPONENTS FOR SPEED BUSTo be able to use the high-speed system performance fully, up to 10 VIPA moduleswith the new VIPA 32bit highspeed-bus (40 MByte/s) can be connected to the leftside of the CPU. Very fast E/A units and counters as well as PROFIBUS-DP master and

Interbus master units are available. Any of the VIPA High-Speed CPUs will beconnected to the SPEED Bus rail. With the Standard-Bus, any VIPA or Siemensmodules can quickly and easily be placed to the right.

SPEED7-CPUs FOR SPEED-BUS PRICEOrder No.: Technical data in Euro

CPU 314St/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2 MByte), MPI interface,SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, DI 8-16 / DO 8-0, AI 4, AO 2, 1 Pt100, 4 counters (100 kHz),PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317SE/DPM-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317Sn/nEt-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP, S7 communication for max. 64 connections. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317Sn/nEt-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFInEt & PROFIBUS-DP-Master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP, S7 communication for max. 16 connections. 32 I/O-units per lineHW identification: 6ES7317-2EK13-0AB0 + 6GK343-1EX11-0XE00



PLC

19

rene

6ES7321-1BH01-0AA0 VIPA 321-1BH01 119,-

6ES7321-1BL00-0AA0 VIPA 321-1BL00 239,-

6ES7321-1FH00-0AA0 VIPA 321-1FH00 162,-

6ES7322-1BF01-0AA0 VIPA 322-1BF01 140,-

6ES7322-1BH01-0AA0 VIPA 322-1BH01 165,-

6ES7322-1BH01-0AA0 VIPA 322-1BH41 24VDC/2A 212,-

6ES7322-1BL00-0AA0 VIPA 322-1BL00 331,-

6ES7322-1HH01-0AA0 VIPA 322-1HH00 246,-

6ES7322-5FF00-0AB0 VIPA 322-5FF00 227-

6ES7323-1BL00-0AA0 VIPA 322-1BH60 854,-6ES7323-1BH01-0AA0 VIPA 323-1BH01 182,-

6ES7323-1BL00-0AA0 VIPA 323-1BL00 309,-

6ES7 331-1KF01-0AB0 VIPA 331-1KF01 328,-

6ES7331-7KB01-0AB0 VIPA 331-7KB01 183,-

6ES7331-7KF01-0AB0 VIPA 331-7KF01 468,-

6ES7332-5HB01-0AB0 VIPA 332-5HB01 305,-

6ES7332-5HD01-0AB0 VIPA 332-5HD01 390,-

6ES7334-0KE00-0AB0 VIPA 334-0KE00 288,-

VIPA 353-1DP01 204,-

VIPA 341-1AH01 720,-

VIPA 341-1CH01 774,-

VIPA 343-2AH10 510,-

VIPA 343-2AH10

VIPA 353-1DP01

VIPA 332-5HD01

VIPA 321-1BH01VIPA 322-1BL00

VIPA 341-1CH01

40mm

PLC

DIGITAL INPUTIdentification Order No.: In- PRICESIEMENS VIPA puts in Euro

1624VDC32

24VDC16

120/230VAC

DIGITAL OUTPUTIdentification Order No.: Out- PRICESIEMENS VIPA puts in Euro

8 trans. outputs24VDC/2A


16 trans. outputs


16 Rel. outputs24VDC/230V/5A

8 triac. outputs120/230VAC/2A

16 trans. outputs1 input manual

16 switsches A/H

DIGITAL INPUT AND OUTPUTIdentification Order No.: Inputs & PRICESIEMENS VIPA Outputs in Euro

8/8

16/16

Identification Order No.: ANALOG INPUT/OUTPUT PRICESIEMENS VIPA Technical data in Euro

Analog input, 8x13Bit, 4 conductors, ±50, ±500mV, ±1, ±5, ±10V, 1...5V, 0...10V,±20mA, 0...20mA, 4...20mA, 0...600/6000Ohm, Pt100, ni100/1000

Analog input, 2x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V,10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, ni100, thermocouples J,R,K,n,L,E,t,S,B,C

Analog input, 8x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V, 10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, ni100, thermocouples J,R,K,n,L,E,t,S,B,C

Analog output, 2x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop

Analog output, 4x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop

Analog input/output, 4 input/12Bit, 0...10V, Pt100 (RtD-4L), 0...10kOhm, 2 output/12Bit, 0...10V

SYSTEM 300V – compatible SIEMENS S7-300®

Modules – I/O-Modules, CPs & Fieldbus-Units

PROFIBUS SLAVE ADAPTOR PRICEOrder No.: Technical Data in Euro

DP-Slave, 1 DP-connection, DP-V0, V1, max. 32 units / lines

COMMUNICATION PROCESSORS PRICEOrder. No.: Technical Data in Euro

RS232, SubD 9 pol., potential decoupled, ASCII, 3964R

RS422/485, SubD 9 pol., potential decoupled, ASCII, 3964R

AS-i-Master, Profil M3, max. 62 Slaves

20

rene

VIPA 390-1AB60 18,-VIPA 390-1AE80 28,-VIPA 390-1AF30 33,-VIPA 390-1AJ30 44,-VIPA 390-1BC00 76,-VIPA 390-9BC00 672,-

VIPA 392-1AJ00 24,-VIPA 392-1AM00 36,-VIPA 922-3BC50 48,-VIPA 922-3BD20 49,-VIPA 922-3BF00 55,-VIPA 922-6BC50 74,-VIPA 922-6BD20 75,-VIPA 922-6BF00 81,-

VIPA 307-1BA00 105,-

VIPA 307-1EA00 131,-

VIPA 307-1KA00 173,-

VIPA 950-0KB31

VIPA 953-1LE00 98,-VIPA 953-1LF00 147,-VIPA 953-1LG00 217,-VIPA 953-1LH00 309,-VIPA 953-1LJ00 488,-VIPA 953-1LK00 731,-VIPA 953-1LL00 1.023,-VIPA 953-1LM00 1.509,-VIPA 953-1LP00 2.240,-

VIPA 953-0KX10 122,-

VIPA 950-0KB01 202,-

VIPA 950-0KB31 256,-

VIPA

307

-1BA

00

VIPA

307

-1EA

00

SYSTEM 300V – compatible SIEMENS S7-300®

Accessories – memory cards, profile rails, connectors, power supplies

PROFILE RAILS PRICEOrder No.: Length max. mounting in Euro

160mm 1 CPU / 1 Unit

482mm 1 CPU / 8 Unit530mm 1 CPU / 10 Unit

830mm 1 CPU / 16 Unit2000mm 1 rail

2000mm ECO-stack, 10 rails

FRONT CONNECTOR PRICEOrder No.: Technical data in Euro

20-pole with screw contact40-pole with screw contact20-pole with 2,5m cable20-pole with 3,2m cable20-pole with 5,0m cable40-pole with 2,5m cable40-pole with 3,2m cable40-pole with 5,0m cable

POWER SUPPLIES PRICEOrder No.: Technical data in Euro

Primary: 100-230VAC, Secondary: DC 24V, 2,5A

Primary: 100-230VAC, Secondary: DC 24V, 5A

Primary: 110...240VAC, Secondary: DC 24V, 10A

MEMORY CONFIGURATION CARDS PRICEOrder No.: Additional memory extension: in Euro






1MByte (512kByte programm/512kByte data)

2MByte (1MByte programm/1MByte data)

4MByte (2MByte program/2MByte data)

8MByte (4MByte program/4MByte data)

All cards have a minimum capacity of 512MByte and can be usedadditionally for program back-up.

PLC

21

MMC-FLASHCARDPRICE

Best. Nr.: in Euro

512MByte flashcard, only for program back-up,recommended if no MCC-Card is used.

PROGRAMMING ADAPTERSPRICE

Best. Nr.: in Euro

S7-MPI adaptor for PC/RS 232COM interfaces, automatic Baud rate setting 9.6 - 115 kBaud,suitable for the use with StEP®7 by SIEMEnS, Cable length MPI 1.2m, serial cable 3m, Supply via CPU, PG interface.

S7-MPI adaptor for PC USB interface, incl. USB driver suitable for the use with StEP®7 of SIEMEnS,Cable length MPI 1.2m, serial cable 3m,supply via USB-interface. (Win7 32 bit)

rene

VIPA 214-1BC03 361,-VIPA 214-1BA03 410,-VIPA 214-2BE03 450,-VIPA 214-2BP03 461,-VIPA 214-2BM03 725,-VIPA 214-2CM03 725,-VIPA 214-2BS03 785,-VIPA 214-2BS13 458,-VIPA 214-2BS33 461,-VIPA 214-2BT13 884,-VIPA 215-1BA03 724,-VIPA 215-2BE03 754,-VIPA 215-2BP03 775,-VIPA 215-2BM03 1.030,-VIPA 215-2CM03 1.030,-VIPA 215-2BS03 1.030,-VIPA 215-2BS13 772,-VIPA 215-2BS33 775,-VIPA 215-2BT13 1.030,-VIPA 953-0KX10 122,-VIPA 950-0KB00 52,-

VIPA 214-1BC06 361,-VIPA 214-1BA06 410,-VIPA 214-2BM06 725,-VIPA 215-1BA06 724,-VIPA 215-2BE06 754,-VIPA 215-2BT16 1.030,-

VIPA 253-1DP01 161,-VIPA 253-1DP11 192,-VIPA 253-1CA01 161,-VIPA 253-1DN00 161,-VIPA 253-1IB00 169,-VIPA 253-1NE00 247,-

TIASTEP®7

STEP®7

VIPA 253-1DP31 138,-

VIPA 253-1CA30 138,-

PLC

22

CPUCPU HW identification uniformly: 6ES7315-2AF03-0AB0/V1.2

CPU 21x Memory/ Inter- PRICEOrder No.: Load memory faces in Euro

48/80kByte MPI96/144kByte MPI96/144kByte MPI/LAn (PG/OP) 96/144kByte MPI / DP-Slave96/144kByte MPI / DP-Master96/144kByte MPI/CAnopen-Master 96/144kByte MPI / 2xRS23296/144kByte MPI / 1xRS23296/144kByte MPI / 1xRS485 96/144kByte MPI / LAn (CP343)128/192kByte MPI128/192kByte MPI/LAn (PG/OP)128/192kByte MPI/DP-Slave128/192kByte MPI/DP-Master128/192kByte MPI/CAnopen-Master128/192kByte MPI / 2xRS232128/192kByte MPI / 1xRS232128/192kByte MPI / 1xRS485 128/192kByte MPI / LAn (CP343) 512MByte MMC flash card

– PG/AG-download cable

CPUCPU HW identification uniformly: 6ES7315-2AG10-0AB0/V2.6

CPU 21x Memory/ Inter- PRICEOrder No.: Load memory faces in Euro

48/80kByte MPI96/144kByte MPI96/144kByte MPI/DP-Master128/192kByte MPI128/192kByte MPI / LAn (PG/OP)128/192kByte MPI / LAn (CP343)

FIELDBUS-SLAVE INTERFACES PRICEOrder No.: Technical data in Euro

PROFIBUS-DP, address 1-99PROFIBUS-DP, LWL, address 1-99

CAnopen, address 1-99Devicenet, address 0-63Interbus, to 16 modulesEthernet, ModbustCP

The CPUs of the system 200V need only 30% of the space required of the S7-300®

CPUs, but nevertheless operate with the full STEP®7 instruction set S7-315® bySIEMENS. Through the standard MPI interface via PG programming unit, PC adaptor andoperator panels from SIEMENS, ESA, ADVANTECH, VIPA a.s.o. can be connected.To save the project, a custom MMC card can be used.

The RAM and Flash memory necessary for the operation are included in the CPU.Additionally PROFIBUS-DP master, DP-Slave, RS232 interface or TCP/IP CP-unitcan be combined in different CPU variations. High memory sizes up to 128kByteprogram memory and 192kByte load memory with short cycle times offer a bigarea of application. A CPU can supply up to 32 units.

SYSTEM 200V – STEP®7 programmableModular PLC-System – CPU-, Fieldbus-Interfaces

FIELDBUS-SLAVE ECO INTERFACES PRICEOrder No.: Technical data in Euro

PROFIBUS DP-Slave, address 1-125, up to 8 units, DC 24 V, 12MBaud, DP-V0, DP-V1

CAnopen-Slave, adress 1-125, up to 8 units, DC 24V, 1MBaud

Dimensions 1 slot(H x W x D): 76 x 25,4 x 74mm

Dimensions 2 slots(H x W x D): 76 x 50,8 x 74mm

rene

VIPA 238-2BC00 311,-

VIPA 250-1BA00 247,-

VIPA 250-1BS00 264,-

VIPA 253-1BA00 434,-

VIPA 254-1BA00 434,-

VIPA 207-1BA00 101,-

VIPA 207-2BA20 123,-

VIPA 201-1AA00 23,-

VIPA 201-1AA10 29,-

VIPA 201-1AA20 29,-

VIPA 201-1AA40 33,-

VIPA 290-1AF30 18,-

VIPA 208-1DP01 488,-

VIPA 240-1DA10 204,-

VIPA 240-1BA20 270,-

VIPA 240-1CA20 270,-

VIPA 240-1CA21 270,-

VIPA 240-1EA20 270,-

VIPA 240-0EA00 57,-

VIPA 240-0EA10 57,-

VIPA 240-1FA20 270,-

VIPA 260-1AA00 124,-

VIPA 261-1CA00 141,-

VIPA 260-1XY05 40,-VIPA 260-1XY10 44,-VIPA 260-1XY25 59,-

VIPA 290-0AA10 4,-VIPA 290-0AA20 7,-VIPA 290-0AA40 12,-VIPA 290-0AA80 21,-

PLC

23

FUNCTION MODULES PRICEOrder No.: Technical data in Euro

SM 238C system expansion, 12 DI, 4 DI/A24VDC 1A, 6 (16bits)/3 (32bits) of counter 30kHz,3x AI 12 bits: ±10V/4 V/400mV/20 mAand 4-20mA 1x AI 12 bits: Pt100 / 1000,ni100/1000, 600/3000 ohm, 2xAA 12bits:±10V/20 mA, 1-5V, 0-10V, 0-20mA, 4-20mA

2x32Bit / 4x16Bit incremental counterinputs 24VDC, max. 1Mhz, 2xDA 24VDC/1A

1x12/24 bits of counter input SSI, RS422,600kBd, 2xDA 24VDC /1A

Positioning-module for stepping motor1 axis, RS422, potential decoupled

Positioning-module FM for servomotor, 1 axis, incremental encoder RS422, potential decoupled, tU 3xDC 24 V, tH 2xDC 24 V/1A

POWER PACKS & PASSIV TERMINALS MODULES PRICEOrder No.: Technical data in Euro

prim. AC 100-240VAC/sec. 24VDC, 2A

prim. AC 100-230VAC/sec. 24VDC, 2A± on 2x11 terminals red/blue

2x11 terminals, in each case for thepotential distribution, grey-grey2x11 terminals, in each case for thepotential distribution, green/yellow-grey

2x11 terminals, in each case for thepotential distribution, red/blue

2x5 terminals, gray-gray2x6 terminals, red/blue

35 mm Alu DIn-Rail, Length: 530mm

CP- MODULES PRICEOrder No.: Technical data in Euro

PROFIBUS-DP master, up to 12Mbps, 100/200V

4 ports Ethernet Switch, 10/100Mbps,autonegotiation, speed sensing, crossover

RS232, DB9, ASCII, 3964R, MODBUS RtU/ASCII

RS485, DB9, ASCII, 3964R, MODBUS RtU/ASCII

RS422/RS485, DB9, ASCII, 3964R, MODBUS RtU/ASCII

ENOCEAN RADIOTRANSMITTER PRICEOrder No.: Technical data in Euro

Communication central processing unit for EnOcean, radio sensors, 868.3 MHz, SMA jack

EnOcean aerial for CP240,direct mounting on module

EnOcean aerial for CP240,magnet foot aerial incl. 1.5 m of cable

M-BUS PRICEOrder No.: Technical data in Euro

Communication processor for M-Bus-system (Metering-Bus), 2-wire fieldbus for data acquisition of consumption, electrical isolated, up to 6 slaves possible.



LINE EXTENTION PRICEOrder No.: Technical data in Euro

Basic module for CPU line,max. 3 extensions

Interface modul forextension line from 2. to 4.

cable connection 0.5 mcable connection 1 mcable connection 2.5 m

BACK WALL BUS PRICEOrder No.: Modules in Euro

1248

Arbitrarily addable to max. 32 units.

EnOcean is a radio system without any power supplywhich was developed in 2001 by the company EnOce-an. Based on the short signal duration of 0.5ms and10mW transmitting power the radio transmission tech-nology has a very low power demand of only 50 µ Ws.At this rate, the system uses energy from the smallestchanges of pressure or temperature for the electricitysupply of the sensors. The rangeof the sensors reachesup to 300m distance outside.

RADIOTECHNOLOGY FOR BUILDING AUTOMATION

SYSTEM 200V – STEP®7 programmableModular PLC-System – I/O-Units, Accessories

rene

VIPA 231-1BD53 228,-

VIPA 231-1BD60 341,-

VIPA 231-1BD70 341,-

VIPA 231-1BF00 378,-

VIPA 231-1FD00 386,-

VIPA 232-1BD51 228,-

VIPA 234-1BD50 291,-

VIPA 234-1BD60 296,-

VIPA 231-1BD30 138,-

VIPA 231-1BD40 138,-

VIPA 232-1BD30 145,-

VIPA 232-1BD40 145,-

VIPA 221-1BF00 65,-VIPA 221-1BF50 70,-VIPA 221-1BF10 65,-VIPA 221-1BF21 108,-VIPA 221-1BH10 129,-VIPA 221-1BH51 140,-VIPA 221-2BL10 246,-VIPA 221-1FD00 104,-VIPA 221-1FF20 116,-VIPA 221-1FF30 116,-VIPA 221-1FF50 116,-VIPA 221-1BH20 177-VIPA 221-1BF30 60,-VIPA 221-1BH30 108,-

VIPA 223-1BF00 92,-VIPA 223-2BL10 279,-

VIPA 222-1BF00 76,-VIPA 222-1BF10 87,-VIPA 222-1BF20 97,-VIPA 222-1BF50 82,-VIPA 222-1BH10 151,-VIPA 222-1BH20 189,-VIPA 222-1BH50 121,-VIPA 222-2BL10 284,-VIPA 222-1HF00 103,-VIPA 222-1HD10 70,-VIPA 222-1HD20 106,-VIPA 222-1FF00 153,-VIPA 222-1DB00 125,-VIPA 222-1BF30 70,-VIPA 222-1BH30 124,-

ANALOG INPUT AND OUTPUT PRICEOrder No.: Technical data in Euro

Analog input, 2 conductors/4x16Bit, 4 conductors/2x16 bitsPt100, Pt/ni1000, niCrni, thermocouple, J, K, n, R, S, t±10V, ±400mV, ±20mA, 4-20mAAnalog input, 4x12Bit, 0/4-20mA, potential decoupled channel

Analog input, 4x12Bit, ±10V, potential decoupled channel

Analog input 2conductor/8x16bits, 4conductor/4x16bitsPt100, thermocouple J, K, t, 0-60mV

Analog input FASt, 4x16Bit, ±400mV, ±4V, ±10V,±20mA, 4-20mA, process and diagnosis alarm, average value generation more than the last 2.4, 8 or 16 valuesCycle time 1ms for 4 channels

Analog source module,4outputs 0-10V, ±10V,0-20mA,12bits

Analog input and output 2x12 bits of input, 2x12bitsof output, ±10V, 0-10V, 1-5V, ±20mA, 0-20mA, 4-20mA

3x AI 12bits: ±10V/4 V/400mV/20 mA and 4-20mA,1x AI 12bits: Pt100/1000, ni100/1000, 600/3000 ohm,2xAA 12bits: ±10V/20 mA, 1-5V, 0-10V, 0-20mA, 4-20mA,Default value can be activated at PLC stop.

AI 4x12Bit, ±10V, ECO

AI 4x12Bit, 4..20mA, ±20mA, ECO

AO 4x12Bit, 0..10V, ±10V, ECO

AO 4x12Bit, 0/4..20mA, ECO

DIGITAL INPUT PRICEOrder No.: Technical data in Euro

DI 8x DC 24VDI 8x DC 24V, nPnDI 8x DC 24V, 0,2msDI 8x, alarm DC 24V, 0,2msDI 16x DC 24VDI 16x DC 24V, nPnDI 32x DC 24VDI 4x AC/DC 90...230V, potential decoupledDI 8x AC/DC 60...230VDI 8x AC/DC 24...48VDI 8x AC 180...265VDI 16x DC 24V, (2x counter)DI 8x DC 24V, ECODI 16x DC 24V, ECO

DIGITAL INPUT AND OUTPUT PRICEOrder No.: Technical data in Euro

DI/O 8x DC 24V, 1A, soft-configurableDI/O 16x DC 24V and DO 16x DC 24V, 1A

DIGITAL OUTPUT PRICEOrder No.: Technical data in Euro

DO 8x DC 24V, 1ADO 8x DC 24V, 2ADO 8x DC 24V, 2A, potential decoupled, (4 groups)D0 8x DC 24V, 0.5A, nPnDO 16x DC 24V, 1ADO 16x DC 24V, 2ADO 16x DC 24V, 0.5A, nPnDO 32x DC 24V, 1ADO 8x relay, 230VAC / 24VDC, 5ADO 4x relay, galvanic decoupled, 230VAC/30VDC, 5ADO 4x relay, galvanic decoupled, 230VAC/30VDC, 16ADO 2x, solid-state, 230VAC/400VDC, 0.5ADO 2x dimmer f. ohm., ind., cap. load, 230VAC/2ADO 8x DC 24V, 0.5A, ECODO 16x DC 24V, 0.5A, ECO

PLC

24



SYSTEM 200V – STEP®7 programmableModular PLC-System – I/O-Units, Accessories

rene

VIPA 112-4BH02 239,-

VIPA 114-6BJ02 304,-VIPA 114-6BJ03 369,-VIPA 114-6BJ04 423,-

VIPA 114-6BJ52 320,-VIPA 114-6BJ53 385,-VIPA 114-6BJ54 439,-

VIPA 115-6BL02 407,-VIPA 115-6BL03 472,-VIPA 115-6BL04 524,-




VIPA 953-0KX10 122,-

VIPA 152-4PH00 239,-

VIPA 152-6PH00 267,-

VIPA 152-6PL00 346,-

VIPA 151-4PH00 204,-

VIPA 151-6PH00 233,-

VIPA 151-6PL00 303,-

VIPA 153-4PF00 172,-

VIPA 153-4PH00 222,-

VIPA 153-6PH00 249,-

VIPA 153-6PL00 323,-VIPA 153-6PL10 313,-

VIPA 153-4CF00 172,-

VIPA 153-4CH00 222,-

VIPA 153-6CH00 249,-

VIPA 153-6CL10 298,-

VIPA 123-4EH01 147,-VIPA 123-4EJ01 227,-VIPA 123-4EL01 287,-VIPA 123-4EJ11 241,-

VIPA 123-4EJ20 323,-

VIPA 134-4EE00 282,-

VIPA 101-4FH50 69,-

PLC

25

MICRO-PLCs memory/Technical Data

PRICEOrder No.: loading memory in Euro

8/16kByte 8(12)DI/8(4)DO, 24VDC/0,5A, not extendable

16/24kByte16(20)DI (4DI with 30 kHz)/8(4)DO 24VDC/0,5A,24/32kByteof it 2DO as an impulse output, extendable32/40kByte

16/24kByte16DI (4DI with 30 kHz)/8DO relay,24/32kByte230VAC/24VDC/5A, extendable32/40kByte

16/24kByte16(20)DI (4DI with 30 kHz)/16(12)DO 24VDC/0,5A,24/32kByteof it 2DO as an impulse output, extendable32/40kByte

16/24kByte 16(20)DI (4DI with 30 kHz)/16(12)DO 24VDC/0,5A24/32kByte of it 2DO as an impulse output,32/40kByte + 1x RS232 interface

16/24kByte 16(20)DI (4DI with 30kHz)/16(12)DO 24VDC/0,5A24/32kByte of it 2DO as an impulse output,32/40kByte + 1x DP-Slave

16/24kByte 16(20)DI (4DI with 30 kHz)/16(12)DO 24VDC/0,5A24/32kByte of it 2DO as an impulse output,32/40kByte + 1x RS485 interface

512MByte MMC flash card

PROFIBUS OUTPUT MODULES

Order No.:Digital PRICEOutputs in Euro

16 transistor, 24 VDC, 1,2A

16 transistor, 24 VDC, 1,2A, 4x11terminals following 3 conductor sensors

32 transistors, 24 VDC, 1,2A

PROFIBUS INPUT MODULES

Order No.:Digital PRICE

Inputs 24 VDC in Euro

16

16 with 4x11 terminalsfor 3 conductors sensors

32

PROFIBUS I/O-MODULES

Order No.:Digital Inputs and PRICETransistor Outputs in Euro

8 DI / O with 2x11 terminalsDI 8 x DC 24 VDC

DO 8 x DC 24 VDC, 1A

DI 8 x DC 24 VDCDO 8 x DC 24 VDC, 1A

4x11 terminals

16 DI, 16 DO, 24 VDC, 1A

24 DI, 8 DO, 24 VDC, 1A

CANopen I/O-MODULESOrder No.: Digital Inputs and PRICE

Transistor Outputs in Euro

8DI / A with 2x11 terminals

8DI, 4DI / A, 4DO, 24VDC / 1A

8DI, 4DI / A, 4DO, 24VDC / 1A with 4x11 terminals

24DI, 8DO, 24VDC, 1A

CPU HW identification uniformly:6ES7 315-2AF03-0AB0/V1.2

SYSTEM 100V – STEP®7 programmableMicro PLC-Compact System – CPUs & I/O-Units

MICRO PLC EXTENSIONS PRICEOrder No.: Inputs and Outputs in Euro

8DI / 8DO, 24VDC/0,5A16DI / 8DO 24VDC/0,5A16DI / 16DO 24VDC/0,5A

16DI / 8DO relay, 230VAC/24VDC/5A16DI 60-230VAC / 8DO relay,

230VAC/24VDC/5A

2x12 Bit AI, 2x12 Bit AA/ +/-10V,0-10V,1-5V,+/-20mA,0-20mA,4-20mA,1x12 Bit AI Pt100/1000, ni100/1000,default value can be activated.

With the 100V expansion modules the bus connector is included.

SHUNTING FIELD PRICEOrder No.: to system 100 V in Euro

8 x 11 cage clamp terminals

rene

VIPA 972-0DP01 34,-

VIPA 972-ODP10 44,-

VIPA 972-ODP20 44,-

VIPA 972-ODP30 44,-

VIPA 972-9DP01

VIPA 972-9DP10

VIPA 972-9DP20

VIPA 972-9DP30

VIPA 972-0PN00 19,-

VIPA 972-8PN00 180,-

VIPA 830-0LC00 133,-

VIPA 830-0LD00 266,-

VIPA 830-0LE00 664,-

VIPA 830-0LF00 1.327,-

905-6AA00 110,-

VIPA 830-0PC00 205,-

VIPA 830-0PD00 399,-

VIPA 830-0PE00 989,-

VIPA 830-0PF00 1.905,-

VIPA 306-1LE00 1.061,-

VIPA 306-1UZ00 1.061,-

VIPA 306-1UE00 1.061,-

PLC

26

Features EasyConn and standard connector:• Visual connection check (cross wiring, position of shield and cable)• High sturgeon safety and robustness by solid zinc pressure castingfull metal casing

• Cable splicing via comfortable cutting-clamp technology• Lostsafe one-screw-mounting system• Integrated terminating resistor• Integrated PG/diagnosis jack• 0°, 45°, 90° cable departure• Additional PG connection with 90° cable departure

Features diagnosis electronic with EasyConn:• Status display via integrated LEDs for bus-test functions

PWR-LED : (on) power supply 4...5,5V for device OK

tXD-LED : (blinks) device activity on bus

term-LED : (off) terminating resistor deactivated (on) terminating resistor activated (blinks) terminating resistor defective

ERR-LED : (off) bus state OK (blinks) wrong signal level (on) no termination or open

PROFIBUS CONNECTORS PRICEOrder No.: Technical data in Euro

Standard PROFIBUS connector, 90°, PG jack,cutting-clamp technology

EasyConn PROFIBUS connector, 90°, PG jack, diagnosis electronics, cutting-clamp technology

EasyConn PROFIBUS connector, 45°, PG jack, diagnosis electronics, cutting-clamp technology

EasyConn PROFIBUS connector, 0°,diagnosis electronics, cutting-clamp technology

Standard PROFIBUS connector, 90°, PG jack,cutting-clamp technology, 100 pieces

EasyConn PROFIBUS connector, 90°, PG jack,diagnosis electronics, cutting-clamp technology,100 pieces

EasyConn PROFIBUS connector, 45°, PG jack,diagnosis electronics, cutting-clamp technology,100 pieces

EasyConn PROFIBUS connector, 0°,diagnosis electronics, cutting-clamp technology,100 pieces

PROFINET CONNECTORS PRICEOrder No.: Technical data in Euro

PROFInEt & EtherCAt plug, 180°, RJ45,8 wire, insulation displacement connection,AWG24/1 - 22/1; AWG26/7 - 22/7, 1 piece

PROFInEt & EtherCAt plug, 180°, RJ45,8 wire, insulation displacement connection,AWG24/1 - 22/1; AWG26/7 - 22/7, 1 pieces

PROFIBUS CABLES PRICEOrder No.: Length in Euro

100m

200m

500m

1.000m

PROFIBUS DISMANTLE TOOL

Dismantle tool (Manufacturer: SIEMEnS)

PROFINET CABLES PRICEOrder No.: Length in Euro

100m

200m

500m

1.000m

GENERAL ACCESSORIESPROFIBUS / PROFINET Connectors & Cables, S5 Retrofit – PROFIBUS DP slave modules

onrequest

onrequest

onrequest

onrequest

S5®-PROFIBUS SLAVE ADAPTOR PRICEOrder No.: Name in Euro

IM 306 DP-Slave - 115U ZG/EG IM*, power supply 24VDC inclusive

IM 306 DP-Slave - 135U/155U ZG CPU

IM 306 DP-Slave - 135U/155U ZG/EG IM, power supply 24VDC inclusive

* Adaptation capsules 6ES5 491-0LB11 for application in AG-115U racks necessary.

rene

VIPA 920-1CB50 1.300,-

VIPA 920-1BB10 360,-

VIPA 910-1EN50 110,-

VIPA 910-1EN80 145,-

VIPA 911-2PN50 360,-

VIPA 911-2PN80 545,-

PLC

27

PROFIBUS REPEATER PRICEOrder No.: Technical Data in Euro

ProfiHub B5, 5 galvanic isolated channels (repeater segments), 31 devices per channel,transparent for all PROFIBUS DP protocols (DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFI-safe, PROFIdrive a.s.o.), transmission speed 9.6kbps to 12Mbps (including 45.45kbps),PROFIBUS address not required, integrated termination facilities (switches), operating temperature -20 to +75°C, dimensions: 167 x 111 x 32mm, supply: 10-30 VDC, 130mA, isolation class IP 20

PROFIBUS Repeater B1, 1 repeater segment, 31 devices per channel, transparent for allPROFIBUS DP protocols (DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrivea.s.o.), transmission speed 9.6kbps to 12Mbps (including 45.45kbps), PROFIBUS addressnot required, integrated termination facilities (switches), operating temperature -20 to +60°C, dimensions: 106 x 55 x 33mm, supply: 19-28 VDC, 65mA, isolation class IP 20

ETHERNET SWITCHES PRICEOrder No.: Technical Data in Euro

Industrial-Switch En5-R, 5x RJ45 10/100BasetX full / half Duplex,supports IEEE 802.3 and IEEE 802.3u/x and automatic MDI/MDI-X recognition,redundant power supply for 12-45 VDC,IP30 aluminium housing for DIn rail mounting

Industrial-Switch En8-R, 8x RJ45 10/100BasetX full / half Duplex,supports IEEE 802.3 and IEEE 802.3u/x and automatic MDI/MDI-X recognition,redundant power supply for 12-45 VDC,IP30 aluminium housing for DIn rail mountin

PROFINET SWITCHES PRICEOrder No.: Technical Data in Euro

Industrial-Switch Pn5-RD, PROFInEt v2 Conformance Class B,Profinet diagnosis via GSD integration, Management functions such as IGMP Snooping, IEEE 802.1Q VLAn, QoS, RMOn, SnMP, Port mirroring, PROFInEt I/O parameters, I/O cyclic data, DCP, DHCP, turbo Ring and turbo Chain (recovery time < 20 ms)

Industrial-Switch Pn8-RD, PROFInEt v2 Conformance Class B,Profinet diagnosis via GSD integration, Management functions such as IGMP Snooping, IEEE 802.1Q VLAn, QoS, RMOn, SnMP, Port mirroring, PROFInEt I/O parameters, I/O cyclic data, DCP, DHCP, turbo Ring and turbo Chain (recovery time < 20 ms)

UNMANAGED ETHERNET-SWITCHES

MANAGED ETHERNET-SWITCHES

The industrial switches EN5-R (5-Port) and EN8-R are entry-level models which support the IEE802.3 or 802.3x/u with 10/100M full / half duplex and MDI/MDIX recognition. They are designed foroperating temperature ranges of -10° up to 60°C and can also be deployed in rough industrialenvironments.

The Ethernet switches PN5-RD (5-Port) and PN8-RD (8-Port) are Managed Ethernet switches withintegrated PROFINET functions. This makes it easier to integrate the PN switches into PROFINEToriented engineering systems and also support a variety of useful management functions such asIGMP Snooping, IEE802.1Q VLAN, Qos, Port mirroring, SNMP, bandwidth management and warningby e-mail or relay output.

The ProfiHub B5 PROFIBUS-DP repeater in a IP20 casing forindustrial automation, to implement long multi-device spur linesand backbone structures with star/tree segments for PROFIBUS-DP.It has the functionality of 5 galvanic isolated transparent repeaters.This allows network structures with extended spur lines that canhandle a maximum of 31 devices individually and a length equalto the main bus. The ProfiHub B5 refreshes a received message

on one channel and transfers it to all the other channels. Theadvanced 12Mbps core of the repeater B1 is identical to theProfiHub. It can be cascaded unlimitedly and is equipped withan isolated RS485 interface. The data is constantly monitoredfor glitches which are digitally filtered out. Every channel hason-board switchable termination and can drive 31 devices.

PROFIBUS DP-REPEATER

GENERAL ACCESSORIESPROFIBUS Repeater, ETHERNET & PROFINET Switches

rene

VIPA 900-2C510 442,-

VIPA 900-2C520 514,-

VIPA 900-2C580 566,-

VIPA 900-0AQ51 67,-

VIPA

900

-2C5

10VI

PA 9

00-2

C520

VIPA

900

-2C5

80PLC

28

As demonstrated by numerous studies, up to 70% of the maintenance costs canbe saved by preventative maintenance. A useful tool for this is the teleservice thatenables a continuous monitoring and maintenance of the systems. For this reason,with the VIPA teleservice modules we offer a modern and intelligent kind of tele-service for the different types of transmission. VIPA also has the complete productrange of teleservice modules with WAN, WIFI, 3G connection. The communication to your automatization modules are established via USB orvia the Ethernet interface, which belongs to each of our devices as standard. Theconfiguration of the VIPA teleservice modules is performed via a web browser.

Additional software is not required. In addition to the robust hardware, whichshines with the usual VIPA interface variety, VIPA also offers a free service calledTalk2M. Via this service you are able to establish a safe connection to yourconstruction within seconds, regardless of whether they are communicating viamobile phone or a landline. Teleservice of controllers, HMIs, frequency converters, roboters, IPCs etc. are notan impossible challenge for us. With the VIPA Teleservice modules, you have aperfectly balanced combination of hardware and software.

TELESERVICEIndustrial LAN/Modem-Router

TELESERVICE MODULES PRICEOrder No.: Technical data in Euro

tM-C VPn Router WAn/LAn4x RJ45 LAn 100 Mbit/s (configurable LAn/WAn), 2x digital input for internet release, 1x digital output for display talk2M, integrated web interface for configuration, OpenVPn for save internet connection with talk2Mhigh level protection through access control

tM-C VPn Router WIFI/WAn/LAn, WIFI interface for connection to a WIFI network,4x RJ45 LAn 100 Mbit/s (configurable LAn/WAn)2x digital input for internet release, 1x digital output for display talk2Mintegrated web interface for configurationOpenVPn for save internet connection with talk2Mhigh level protection through access control

tM-C VPn Router 3G+/WAn/LAn, 3G+ modem for external broadband communication4x RJ45 LAn 100 Mbit/s (configurable LAn/WAn),2x digital input for internet release, 1x digital output for display talk2M,integrated web interface for configuration,OpenVPn for save internet connection with talk2M,high level protection through access control

OPTIONS

tM antenna GSM/GPRS

Talk2M is an internet service portal, specially designed for the growing demands for secure broadband andmobile access to machinery and equipment.

rene

VIPA SW300 O1LAOP-MANAGER € 309,-

VIPA 603-1OP00 € 264,-

VIPA 603-1CC21 € 635,-

VIPA 603-1TD00 € 175,-

VIPA 950-0KB00 € 59,-

VIPA 603-2CC21 € 741,-

VIPA 660-0KB00 € 70,-

VISUALIZATIONOPERATOR SYSTEMSTD/OP-Textpanels

tD03-text display OP03, 2x20 chars, LCD, 4 F-buttons, numericBlock, ±, arrow keys, ESC, EntER. Project memory: 256kByte projectprogramming via Protool by Siemens, interface: MPISuitable for VIPA 100/200/300V, Siemens S7-300/400.Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm, Weight: 750g,mounting: in the device integrated, captive rocker arms.Supply: 18-32VDC/120 mA.Including MPI connection cable to the PLC VIPA 950-0KB50,Length 2.5 m with PG and diagnosis jack.

OP03-text display OP03, 2x20 chars, LCD, 4 F-buttons, numericblock, ±, arrow keys, ESC, EntER. Project memory: 128kByte projectprogramming via Protool by Siemens, interface: MPI. With integrated StEP®7/S7-300 CPU, 16 KB RAM / 24 KB loading memory,16 digital inputs/16 digital outputs (24VDC/1A).Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm. Weight: 750g,mounting: in the device integrated, captive rocker arms.Supply: 18-32VDC/120 mA.Including MPI connection cable to the PLC VIPA 950-0KB50,Length 2.5 m with PG and diagnosis jack..

VIPA “Green Cable“ programming cable fortD/OP03 and PG/AG download cable forVIPA 100/200/300V.

Programming-Tool for OP03

VIPA TEXT DISPLAYThe TD03 is a small, compact text display for showingmessages about current working conditions, for changingprocess parametres and setting flags with the built-in buttons.An S7®-MPI port can be used to connect it to all Siemens

S7-300/400® PLCs and VIPA series 100/200/300V PLC´s. The configuration is done with the VIPA TD-Wizard. Thegenerated parameters and data blocks are directly loadedin the PLC. The TD itself contains no project data.

VIPA OPERATOR PANELThe operator panel OP03 can be programmed by ProTool SWor OP Manager. It serves for the comfor table display andupdate of process values and the output of messages. AnS7®-MPI port can be used to connect it to all Siemens S7-

300/400® PLCs and VIPA series 100/200/300V PLC´s.

Up to 7 OPs are connectable at the same time to a PLC.As a specific feature the STEP®7 functions StatVAR andSteuVAR are implemented. For project transmission, the VIPAGreencable 950-0KB00 is used.

VIPA COMMANDER COMPACTVIPA CommanderCompact CC03 is an operator control panelwith a text display with 2x20 marks and an integrated PLCCPU, programmable with WinPLC7 by VIPA or with STEP®7by Siemens. The CPU of the CC03 disposes more than 16 KBof program memory and 24 KB of loading memory. In addition, 16 digital inputs and outputs are on board.

The CC03 can be extended with up to four 100V/200Vmodules. The programming can be done via Green Cablefrom VIPA or via standard MPI communication with MPIinterface. The alignment on high accessibility, functionalityand easy project development allows the various applica -tions with the CC03.

PROJECT DEVELOPMENTThe project development for theTD03 is done with TD-Wizard, thatgenerates one DB, which holds thesuitable data after the regis trationof the TD03 through an SFC.

PROJECT DEVELOPMENTThe project development of theOP03 can be done with the OPmanager of VIPA. Here, even complicated navi gations can berealized. The OPManager has aninte grated emulator which helpsyou to check all functions withoutadditional HW on an emulated panel.The transfer of the project can bedone with MPI. It is also possible touse Protool by Siemens.

DIMEnSIOnS tD03/OP03Cut-out: 156 x 78mmOutside: 173 x 88mmDeepness: 32mm

tD03-text display , 2x20 sign, LCD, 4 F-buttons + Shift, Up/DownArrow keys, ESC, EntER, text memory in PLC (data block), Projectdevelopment by tD-Wizard. Interface: MPI.Suitable for VIPA 100/200/300V and Siemens S7-300 / 400.Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm, Weight: 750g,mounting: in the device integrated, captive rocker arms.Supply: 18-32VDC/120 mA. Including MPI connection cable to thePLC VIPA 950-0KB50, Length 2.5 m with PG and diagnosis jack.

... in addition, with DP-Slave connection.

Peripheral-extension cable CC03 for up to 4 expansion modulesEM123 or system 200V. Length: 0.5 m.

30

rene

TP 605C TP 606C TP 608C TP 610C TP 612C

RS 422

‘

RS 232

‘

MPI, P

ROFIBU

SRS

485

o. C

An‘

USB-A

‘

USB B

‘

Ethe

rnet 10/10

0 ‘

Power ‘

Compact Flash

SD / MMC

Extremely powerful Touch Panels offer unique features and a very high scalability.Additionally you have the choice whether you want a panel with or without runtime.

The VIPA Touch Panel family is suited for all applications in the factory, processes andbuilding automation. The VIPA Touch Panels are particularly mechanically robust dueto the aluminum die-cast housing. With the front-side IP65 protection, these devicesalso survive in harsh industrial environments.

The portfolio ranges from 5.7" TFT up to 12.1" TFT color display, and the panels canbe opened either horizontally or vertically. This compact design and functionalityallows VIPA Touch Panels to be used in confined spaces.

OPERATOR SYSTEMSTouch Panels Computer – Professional Panels

VISUALIZATION

31

Display size 5,7 6,5 8,4 10,4 12,1

Resolution 640x480 640x480 800x600 800x600 800x600

touch screen resistive resistive resistive resistive resistive

Processor XScale 800MHz XScale 1,1GHz XScale 1,1GHz XScale 1,1GHz XScale 1,1GHz

Interfaces 1x RS232 1x RS232 1x RS232 1x RS232 1x RS2321x RS422/485 1x RS422/485 1x RS422/485 1x RS422/485 1x RS422/485

1x USB-A 1x USB-A 1x USB-A 2x USB-A 2x USB-A1x USB-B 1x USB-B 1x USB-B 1x USB-B 1x USB-B1x Ethernet 1x Ethernet 2x Ethernet (Switch) 2x Ethernet (Switch) 2x Ethernet (Switch)

1x MPI/PROFIBUS-DP 1x MPI/PROFIBUS-DP 1x MPI/PROFIBUS-DP 1x MPI/PROFIBUS-DP 1x MPI/PROFIBUS-DP

Work memory 128 MB 256 MB 256 MB 256 MB 256 MB

User memory 2 GB 512 MB 512 MB 512 MB 512 MB

Cardslot for CF+SD/MMC CF+SD/MMC CF+SD/MMC CF+SD/MMC CF+SD/MMC

Housing Die-cast aluminium Die-cast aluminium Die-cast aluminium Die-cast aluminium Die-cast aluminium

Dimensions WxHxD 212 x 156 x 44,5mm 212 x 156 x 44,5mm 264 x 189 x 50,5mm 304 x 233 x 52,5mm 325 x 263 x 52,5mm

Integrated cut-out 200 x 144mm 200 x 144mm 250 x 175mm 287 x 217mm 311 x 249 mm

Operating System Windows Windows Windows Windows WindowsEmbedded Embedded Embedded Embedded EmbeddedCE 6.0 Prof. CE 6.0 Prof. CE 6.0 Prof. CE 6.0 Prof. CE 6.0 Prof.

Runtime Movicon11CE Movicon11CE Movicon11CE Movicon11CE Movicon11CEStandard Standard Standard Standard Standard

• Particularly small mounting depth of only 37 to 45mm• Horizontally and vertically deployable• Operating- and configuration-friendly• Extremely robust aluminium housing• Easy mounting through patented mounting bracket• Powerful XScale processor with 800 MHz

rene

eco+ TP 604LC+ TP 607LC+ TP 610LC+ TP 615LC+

eco TP 604LC TP 607LC TP 610LC TP 615LC

SD / MMC

Ethernet 10/100

USB-A

Power

RS 232/42/485

RS 232

ECO Panels – the solid Touch Panels, are not afraid of any common type of operation.The Movicon Runtime is already preinstalled for you. So you are ready to go. TheecoPanel series are not only distinguished by un compromising reliability andperformance, but impressive by an unsurpassed price-performance ratio. Ofcourse, we also paid attention to durability and quality of the products. This isachieved amongst others by a special construction, which enables a fanless anddisc free operation.

OPERATOR SYSTEMSTouch Panels Computer – ECO Panels

Display size 4,3 7 10 15

Resolution 480x272 800x480 1024x768 1024x768

touch screen resistive resistive resistive resistive

Processor Cortex-A8 CPU 1000MHz Cortex-A8 CPU 1000MHz Cortex-A8 CPU 1000MHz Cortex-A8 CPU 1000MHz

Interfaces 1x RS232 1x RS232 1x RS232 (SUB-D) 1x RS232 (SUB-D)1x RS232/422/485 1x RS232/422/485 1x RS232/422/485 (DB25) 1x RS232/422/485 (DB25)

1x USB-A 1x USB-A 1x USB-A 2x USB-A1x Ethernet 1x Ethernet 2x Ethernet 2x Ethernet

1x MPI/PROFIBUS-DP (option) 1x MPI/PROFIBUS-DP (option) 1x MPI/PROFIBUS-DP (option) 1x MPI/PROFIBUS-DP (option)

Work memory 256 MB 256 MB 256 MB 256 MB

User memory 128 MB 128 MB 128 MB 128 MB

Cardslot for SD SD SD SD

Housing plastic plastic aluminium / steel aluminium / steel

Dimensions WxHxD 140 x 116 x 57mm 212 x 156 x 57mm 325 x 263 x 56mm 400 x 310 x 56mm

Integrated cut-out 123 x 99mm 198 x 142mm 311 x 249mm 368 x 290mm

Operating System Windows Windows Windows Windows Embedded Embedded Embedded Embedded CE 6.0 Core CE 6.0 Core CE 6.0 Core CE 6.0 Core

Runtime Movicon11CE Standard Movicon11CE Standard Movicon11CE Standard Movicon11CE Standard

Processor Cortex-A8 CPU 1000MHz Cortex-A8 CPU 1000MHz Cortex-A8 CPU 1000MHz Cortex-A8 CPU 1000MHz

Work memory 256 MB 256 MB 256 MB 256 MB

Operating System Windows Windows Windows Windows Embedded Embedded Embedded Embedded CE 6.0 Core CE 6.0 Core CE 6.0 Core CE 6.0 Core

Runtime Movicon11CE Standard Movicon11CE Standard Movicon11CE Standard Movicon11CE Standard

• Five interfaces: see Table • Mounting depth 50 up to 60 mm • Industrial-grade and robust housing • Multilingual language support• Available for remote access

VISUALIZATION

32

rene

Multi Touch PPC010 PPC015 PPC021

33

OPERATOR SYSTEMSMultitouch Panels Computer – Multitouch Panel PC

VISUALIZATION

Panel PCs – Intelligent control and monitoring – with PC performance in the control cabinet.The combination of an industrial PC with state of the art perfor-mance features and a Touch Panel with ideal display capabilities,enables the user to concentrate high performance into thesmallest space. The latest Intel Atom processor technology,large integrated work memory, and display resolutions of up toFull HD with the 21.5” panel PC are state of the art. The panels also have numerous useful interfaces just likeother VIPA Touch Panels. The pre-installed operating systemsWindows Embedded Compact 7 or Windows Embedded Standard 7 are state of the art in the PC world.

volta

ge sup

ply

DC 12-30

V

VGA interfa

ce

Reset b

utton

2x RS2

32/RS4

22/RS4

85

4x USB

-A in

terfa

ce

2x RJ4

5 Ja

ck

3,5m

m Aud

io out

Display size 10,1“ (16:10) 15,6” wide (16:9) 21,5” wide (16:9)

Display resolution 1280 x 800 1366 x 768 1920 x 1080

touch Screen PCAP PCAP PCAP

Processor Intel Atom D2550 Intel Atom D2550 Intel Atom D2550dualcore @1,86 GHz dualcore @1,86 GHz dualcore @1,86 GHz

Interfaces 2x Ethernet (10/100/1000) 2x Ethernet (10/100/1000) 2x Ethernet (10/100/1000)4x USB2.0 4x USB2.0 4x USB2.0

2x serial (RS232, RS422/RS485) 2x serial (RS232, RS422/RS485) 2x serial (RS232, RS422/RS485)Audio out Audio out 1x MPI/PROFIBUS-DP (option)

Work Memory 2 GB 2 GB 2 GB

User Memory 2 GBwith WEC7/16 GBwith WES7 2 GBwith WEC7/16 GBwith WES7 2 GBwith WEC7/16 GBwith WES7

Card slot CFast CFast CFast

Casing aluminium / steel aluminium / steel aluminium / steel

Dimensions backside WxHxD 292 x 207 x 54,2mm 417,8 x 312,8 x 63,8mm 562,4 x 382,4 x 60,9mm

Integrated cut-out 297 x 212mm 401 x 296mm 547 x 367mm

Operating System Windows Embedded Compact 7 Windows Embedded Compact 7 Windows Embedded Compact 7or or or

Windows Embedded Standard 7 Windows Embedded Standard 7 Windows Embedded Standard 7

Runtime Movicon11CE Standard or Movicon11CE Standard or Movicon11CE Standard orMovicon11Win Standard (32 IO-Bytes) Movicon11Win Standard (32 IO-Bytes) Movicon11Win Standard (32 IO-Bytes)

Ambient temperature 0°C bis 50°C 0°C bis 50°C 0°C bis 50°C

• Latest Intel Atom process technology• High display resolution with up to Full HD with 21.5“ Panel• Numerous interfaces for adequate PC operation• Runtime Movicon 11 Win Standard optionally preinstalled• Optional customer programs also usable• Cooling without a fan• High-quality metal case

rene

62E-MGCO-CB 505,-

62H-MGCO-CB 752,-

62K-NHCO-CB 1.432,-

62P-NHCO-CB 1.741,-

961-0MP0 133,-

953-1SI00 93,-

ZOP7-RT-256 350,-

67K-PNL0-JX 1.849,-

67P-PNLO-JX 2.364,-

67S-PNLO-JX 2.879,-

62F-FEEO-CX 1.219,-

62G-FEEO-CX 1.670,-

62I-IEEO-CX 1.794,-

62K-JEEO-CX 1.905,-

62M-JEEO-CX 2.112,-

VIPA ZRT6-TP 200,-

574-2AH00 90,-

574-2AI00 107,-

953-1SI00 93,-

OPERATOR SYSTEMSTouch Panel Computer – Professional Panels, eco-Panels and Multitouch Panel PC

VISUALIZATION

34

ECO PANELS PRICEOrder No.: Technical data in Euro

4,3“, tFt, 480 x 272 pix, housing: plasticDimensions: 140 x 116 x 57mm, Cut-out: 123 x 99mm

7“, tFt, 800 x 480 pix, housing: plasticDimensions: 212 x 156 x 57mm, Cut-out: 198 x 142mm

10“, tFt, 1024 x 768 pix, housing: aluminium/steelDimensions: 325 x 263 x 56mm, Cut-out: 311 x 249mm

15“, tFt, 1024 x 768 pix, housing: aluminium/steelDimensions: 400 x 310 x 56mm, Cut-out: 368 x 290mm

OPTIONSPRICE

Order No.: in Euro

MPI/PROFIBUS-DP-interface optional

Secure Disc (SD-Card) 2 GB

OPTIONSPRICE

Order No.: in Euro

Extra charge for Zenon runtime Vers. 7.11 256 tags

PANEL PCS PRICEOrder No.: Technical data in Euro

10,1“, 1280 x 800 pix, housing: aluminium/steelDimensions: 292 x 207 x 54,2mm, Cut-out: 297 x 212mm

15,6“, 1366 x 768 pix, housing: aluminium/steelDimensions: 417,8 x 312,8 x 63,8mm, Cut-out: 401 x 296mm

21,5“, 1920 x 1080 pix, housing: aluminium/steelDimensions: 562,4 x 382,4 x 60,9mm, Cut-out: 547 x 367mm

PROFESSIONAL PANELS PRICEOrder No.: Technical data in Euro

5,7“, tFt, 320 x 240 pix, housing: Die-cast aluminiumDimensions: 212 x 156 x 44,5mm, Cut-out: 200 x 144mm





OPTIONSPRICE

Order No.: in Euro

Extra charge for Zenon runtime, Vers. 6.51 256 tags

Compact Flash (CF-Card) 1 GB

Compact Flash (CF-Card) 2 GB

Secure Disc (SD-Card) 2 GB

rene

NT 50-RS-EN 187,-

NT 50-CO-RS 187,-

NT 50-CO-EN 187,-

NT 50-DN-RS 187,-

NT 50-DN-EN 187,-

NT 50-DP-RS 187,-

NT 50-DP-EN 187,-

NT 100-RS-xx

NT 100-RE-CO 495,-

NT 100-RE-DN 495,-

NT 100-RE-DP 495,-

NT 100-CO-DN 495,-

NT 100-CO-DP 495,-

NT 100-DN-CO 495,-

NT 100-DN-DP 495,-

NT 100-DP-CO 495,-

NT 100-DP-DN 495,-

NT 100-DP-DP 495,-

NT100-xx-xx/ML +150,-

PROTOCOL CONVERTERSEthernet/Fieldbus, Ethernet/MPI, Serial/Fieldbus

PROTOCOL CONVERTER PRICEOrder No.: Data in Euro

nettAP50 Gateway RS232/422/485 - Ethernet

nettAP50 Gateway CAnopen - RS232/422/485

nettAP50 Gateway CAnopen - Ethernet

nettAP50 Gateway Devicenet - RS232/422/485

nettAP50 Gateway Devicenet - Ethernet

nettAP50 Gateway PROFIBUS-DP - RS232/422/485

nettAP50 Gateway PROFIBUS-DP - Ethernet

nettAP100 Gateway serial RS232/422/485 - fieldbus on request

PROTOCOL CONVERTER PRICEOrder No.: Data in Euro

nettAP100 Gateway Rt-Ethernet - CAnopen

nettAP100 Gateway Rt-Ethernet - Devicenet

nettAP100 Gateway Rt-Ethernet - PROFIBUS-DP

nettAP100 Gateway CAnopen - Devicenet

nettAP100 Gateway CAnopen - PROFIBUS-DP

nettAP100 Gateway Devicenet - CAnopen

nettAP100 Gateway Devicenet - PROFIBUS-DP

nettAP100 Gateway PROFIBUS-DP - CAnopen

nettAP100 Gateway PROFIBUS-DP - Devicenet

nettAP100 Gateway PROFIBUS-DP - PROFIBUS-DP

nXLIC netX-Master Licence für Rt-Ethernet, PROFIBUS-DP, CAnopen, Devicenet

The netTAP gateway family simply and efficientlymerges two protocols into each other. Whether it’sa simple serial bus, a classic Fieldbus or one of themany Real-Time-Ethernet protocols, netTAP providesa common platform for a transparent conversion ofany protocol of industrial automation. For plantsrecently upgraded using Fieldbus or modernized

with Real-Time-Ethernet, netTAP enables the use ofexisting and proven field devices still by simplyinterfacing between the new and old technology. The modular device design combines the two networkinterfaces in a DIN-rail mountable housing. NetTAPis configured and diagnosed by a universal FDT/DTMbased configuration tool suite.

LED indicators are visualizing status informationfor rapid on-site diagnostics. The protocol-conversionare pre-programmed and loaded as firmware ontothe device on demand. Because of the same physicalnetwork interface all Real-Time-Ethernet protocolscan be managed by one single device variant.

NETTAP 50 – THE LOW-COST GATEWAYnetTAP 50 is a protocol converter for simple conversions. It supports conver sions of1-port Real-Time-Ethernet to Fieldbus to serial automation protocols and realizes slaveto slave and slave to master combinations. As a master netTAP 50 provides full masterfunctionality to a single slave. This enables an effortless integration of a single fielddevice into the superordinated network.

Highlights• Cost optimized, compact design • 1-port-Real-time-Ethernet to Fieldbus, serial RS232/422/485 to Fieldbus

or 1-port Real-time-Ethernet • Ethernet service port • Integrated FDt/DtM based configuration tool• Suitable for OEMs or reseller • Slave to Slave, Slave to Master conversions

NETTAP 100 – GATEWAY WITHOUT LIMITSnetTAP 100 is the protocol converter for sophisticated conversions and manages nextto serial to Fieldbus to 2-port Real-Time-Ethernet also Fieldbus to Fieldbus conversions.It supports slave and master functionality in any combination. There is no restriction onthe master functionality. There is a memory card slot integrated, allowing the user tosave the firmware and configuration data on a removable card.

Power Supply: 18-30V/130 mA @ 24VOperating temperature: 0 ... 60 °C Size: (L x W x H) 100 x 25 x 70mm (without connector)

Power Supply: 18-30V/130 mA @ 24VOperating temperature: 0 ... 60 °C Size: (L x W x H) 100 x 52 x 70mm (without connector)

Highlights• Fieldbus to Fieldbus conversion • 2-port-Real-time-Ethernet to Fieldbus conversion• RS232/422/485 to Fieldbus or 2-port-Real-time-Ethernet conversion• Master and Slave functionality in any combination • Own serial protocols with netSCRIPt language• Memory card option for saving firmware and configuration • One single configuration tool • USB service port

Controller

I/O-Device

Controller

I/O-Devicenetwork configuration and diagnostics

netSCRIPt-editor anddebugger for nettAP 100

COMMUNICATION

35

Zahlenaktualisieren

rene

NT 50-MPI 540,-

NL 50-MPI 470,-

NL 51-DPL 175,-

PROFIBUS/MPI

Ethernet

NT50-MPI NL50-MPI

NL51-DPL

MICRO-CONVERTER PRICEArticle Description in Euro

Micro-converter Ethernet tCP/IP to S7-MPI/PROFIBUS-DP (up to 12Mbps) in the box of a nettAP50. Supply: 24VDC. For the use with StEP®7 of SIEMEnS.

Micro-converter Ethernet tCP/IP to S7-MPI/PROFIBUS-DP (up to 12Mbps) in the box of a Profibus-connector. Supply: 24VDCor via PG-Connector. For the use with StEP® of SIEMEnS.

Micro converter Profinet to PROFIBUS-DP-Link (up to 12MBd)in the box of a Profibus-connector. Power supply: 24VDC

PC CARDS IN ALL FORMATSWith the cifX communication interface, the user will have a unified standard for all Real-Time-Ethernet-and Fieldbus systems on different hardware platforms. The complete protocol stack will be exectued on thePC card and data exchange to the host will be done via Dual-Port-Memory or DMA. Hilscher offers the cifX

PC FIELDBUS CARDS

COMMUNICATION

NETLINK PROXYnetLInK PROXY integrates any PROFIBUS-DP slave in a superordinated PROFInEt net-work. As a connector the device is plugged directly on to the PROFIBUS-DP interfaceof the DP-Slave and connects to the PROFInEt network via the RJ45 socket. OnPROFInEt side netLInK behaves like an ordinary I/O device. the DP-Slave’s processdata is mapped in accordance with the present PI-organisation’s guideline into thePROFInEt slot/subslot addressing model. Commissioning is done via the PROFInEt.

Highlights• Integrates a single DP-Slave into PROFInEt network • For direct mounting on DP interface • Compatible to any PROFIBUS node• Automatic GSDML file generation from GSD file for PROFInEt import • Works in accordance with PI-organization’s proxy guideline

NETLINK MPIthe netLInK has a housing shape that fits in the PG sockets of the Siemens S7-300 andS7-400 controls. Ethernet: 10/100MBd with 16 connections. MPI/PROFIBUS-DP (up to 12MBd),DB9-connector, up to 32 MPI-connections. Protocol: IBH-Link for StEP®7 and RFC 1006.Power supply: 24VDC or via PG socket. Suitable for the use with StEP®7 of SIEMEnS.

Highlights• Parallel MPI communication to 32 controls via 16 tCP/IP connections• RFC 1006 protocol for connection of visualizing systems• Ethernet connection with auto crossover and autonegotiation• Power supply through the PLC MPI-port or alternatively via external 24V • RJ45 Port with status LEDs • Autobaudrate detection • Additional PG socket

Controller

Controller

PROFINET Device

PROFIBUS Device

+24 V

+24 V

Programming ToolVisualization

System

GATEWAYS

36

PC communication cards with PCI or PCI Express, MiniPCI or Mini PCI Express, PCI-104, PC/104 or CompactPCI interface. With a rotary switch an easy and reliab-le slot assignemt can be done for the PCI types. Acomplete software package including a singleFDT/DTM based configuration tool for all products andnetworks, documentation, loadable firmware anddriver tool-kit is always in the scope of delivery. Dueto the own network controller netX a 10-years deli-very is guaranteed.

• For all major network protocols• Available in all common PC card formats• Single hardware for all Real-time-Ethernet protocols• Minimum logistic and administrative effort trough least product variety

• Comprehensive accessories (OPC server & driver for different OS)

• Same software host interface for all protocols • Quick & Easy change of protocol by loadable firmware

rene

CIFX 50 RE 248,-

CIFX 50E-RE 298,-

CIFX 90-RE/F 347,-

CIFX 104-RE 318,-

CIFX 104C-RE 318,-

CIFX xxx-xx/ML +150,-

CIFX 50-DP 298,-

CIFX 50-CO 298,-

CIFX 50-DN 298,-

CIFX 50-2ASM 586,-

CIFX 50E-DP 348,-

CIFX 50E-CO 348,-

CIFX 50E-DN 348,-

CIFX 50E-2ASM 636,-

CIFX 50-2DP 423,-

CIFX 90-DP/F 347,-

CIFX 104-DP 368,-

CIFX 104-CO 368,-

CIFX 104-DN 368,-

CIFX 104C-DP 368,-

CIFX 104C-CO 368,-

CIFX 104C-DN 368,-

CIFX xxx-xx/ML +150,-

FIELDBUS CARDSPC Fieldbus Cards

Powerlink Controlled Node/SlaveCyclic Data max. 2980 Bytes

Acyclic Data SDO Up-/Download

Functions SDO via ASnD and UDP, Poll Request/Response Response time 1μs, Version V2

CANopen Nodes Masternodes max. 126Cyclic Data max. 1024 Bytes 7168 BytesSDO Up- a. Download max. 200Bytes/Request

Emergency Producer Consumer/Producer

Functions node-/Life Guard., Heartbeat, PDO Mapping, nMt Magagement, SYnC, Emergency

PDO Communication synchronized, remotely request and event driven (change of state) max. 64 Rx/txPDO max. 512 Rx/txPDO

CAn 11 Bit 11 Bit

PROFIBUS Slave Master

Slave max. 125Cyclic Data max. 488 Bytes 7168, 255 BytesDPV1 Class 1, 2 yes yesConfiguration Data 244 Bytes 244 Bytes/SlaveAppl. specific Parameter 237 Bytes 237 Bytes/Slave

AS-Interface MasterSlaves max. 62Cyclic Data max. Digital 62 Byte (4Bit/Byte)

Analog 31 Slaves x 4x16BitAyclic Data 220 Bytes/RequestFunctions transactionstypes 1-5, Profil for ext. Master: M4 Version 3.0

EtherCAT Slave Master

Slaves max 200

Cyclic Data max. 512 Bytes 11520 Bytes

Acyclic Data SDO Master/Slave CoE (CAnopen over EtherCAt) SDO Slave/Slave Up-/Download, max. 1500 Bytes

Functions COE Get OD List Emergency, Complex Slave Emergency, topology: Line 3 FMMUs and 4 SYnC-Manager Distributed Clocks

Article System Interface Operating Voltage Operating Temperature Dimensions (L x H x W)

CIFX 50-XX PCI, 33 MHz DPM, IO-DMA 3,3 V / typ. 650 mA -20 ... +55°C 120 x 86 x 18,5mm

CIFX 50E-XX PCI Express, One-Lane Port 3,3 V / typ. 800 mA 0 ... +55°C 120 x 73,2 x 18,5mm

CIFX 104-XX PC/104, 33 MHz DPM 3,3 V / typ. 650 mA -20 ... +70°C 97 x 91 x 24mm

CIFX 104C-XX PCI 104, 33 MHz DPM 3,3 V / typ. 650 mA -20 ... +70°C 97 x 91 x 24mm

CIFX REALTIME-ETHERNET UNITS PRICE

Article Description in Euro

PCI Communication Interface netX for Real-time-Ethernet - 2x RJ45

PCI Express Communication Interface netX for Real-time-Ethernet - 2x RJ45

PC-Card Mini PCI for Real-time-Ethernet - 2x RJ45

PC/104(ISA) Communication Interface netX for Real-time-Ethernet - 2x RJ45

PCI-104(PCI) Communication Interface netX for Real-time-Ethernet - 2x RJ45

nXLIC netX-Master Licence for Ethernet/IP / EtherCAt / PROFInEt / SERCOS III

CIFX FELDBUS UNITS PRICEArticle Description in Euro

PCI Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PCI Interface netX for CAnopen/Slave - SubD Stecker 9-pol.

PCI Interface netX for Devicenet/Slave - COMBICOn 5-pol.

PCI Interface netX for 2x AS-Interface Master - 2x COMBICOn 2-pol.

PCI Express Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PCI Express Interface netX for CAnopen/Slave - SubD Stecker 9-pol.

PCI Express Interface netX for Devicenet/Slave - COMBICOn 5-pol.

PCI Express Interf.netX for 2x AS-Interface Master- 2x COMBICOn 2 pol.

PCI Interface netX for 2x PROFIBUS/Slave - 2x SubD Buchse 9-pol.

PC-Karte Mini PCI für PROFIBUS DP

PC/104(ISA) Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PC/104(ISA) Interface netX for CAnopen/Slave - SubD Stecker 9-pol.

PC/104(ISA) Interface netX for Devicenet/Slave - COMBICOn 5-pol.

PCI-104(PCI) Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PCI-104(PCI) Interface netX for CAnopen/Slave - SubD Stecker 9-pol.

PCI-104(PCI) Interface netX for Devicenet/Slave - COMBICOn 5-pol.

nXLIC netX-Master Licence for PROFIBUS, CAnopen, Devicenet

PROFINET IO Device ControllerIO Devices max. 128Cyclic Data max. 2048 Bytes (IOCR) 11472 BytesAcyclic Data Read/Write Record, max 1024 Read/Write Record, max. 4096

Bytes/telegram Bytes/RequestFunctions Alarmtreatment, DCP minimum cycle time1 ms

Class 1&2 (unsynchronisiert) Alarmtreatment Class 3 (synchronised) Context Management by CLRPC DCP Diagnostic, max. 200 Bytes/telegram Context Management throug CLRPCtarget-actual comparison configuration per Device one buffer for diagnosticfor max. 244 Module, 1 Submodul data available

topologydetection LLDP, SnMP V1, MIB 2, Physik. Device

TECH

NICA

LDATA

The configuration software SYCON.NET isincluded in the delivery with all CIFX-Interfaces!

COMMUNICATION

37

rene

VS NETCOM Plus 111 159,-VS NETCOM Plus 811 630,-VS NETCOM Plus 813 690,-VS NETCOM Plus 1613 990,-

VSCOM 200E PCIex 70,-

VSCOM 400E PCIex 142,-

VSCOM 400H UPCI 132,-

VSCOM 200I UPCI 145,-

VSCOM USB-COM-mini 37,-VSCOM USB-COM-plus 94,-

DK-NCP 8,-WK-NCP 8,-NETZTEIL 19,-

PROTOCOL CONVERTER / PC-CARDSEthernet/Serial, USB/Serial, Accessories

CONVERTER USB-SERIAL

Ethernet-Serial converters allow an easy decentralised constructionof serial connections. Changes of existing software are not necessary.The provided drivers generate virtual COM ports in every operatingsystem which behave like real COM interfaces. The serial data streamwill transmit bidirectional and with evey handshake line via TCP/IP inthe standard Ethernet.

USB-Serialconverters allow furthermore the use of devices with serialinterface, even if the PC owns none or not enough COM interfaces.A virtual COM port which can be used by consisting programs withoutupdate is generated by the provided driver. The converters contain128 bytes FIFOs and can be set to any transfer speeds up to921.600Bps.

SERIAL DEVICE SERVER PRICEOrder No.: Technical data in Euro

1x RS232 DB9 to tCP/IP8x RS232 DB9 to tCP/IP8x RS232/422/485 DB9 to tCP/IP16x RS232/422/485 DB9 to tCP/IP

SERIAL INTERFACE PRICEOrder No.: Technical data in Euro

2x RS232 DB9, 16C950, 921kBd,PCI-Express, 128 Byte FIFO

4x RS232 DB9, 16C950, 921kBd,PCI-Express, 128 Byte FIFO

4x RS232 DB9, 16C950, 921kBd,PCI, 128 Byte FIFO

4x RS232/422/485 DB9, 16C950, 921kBd,PCI, 16 Byte FIFO

USB-SERVERCONVERTER PRICEOrder No.: Technical data in Euro

1x RS232 DB9 integrated in the connector2.0, 1x RS232/422/485, DB9, metal casing

ZUBEHÖR

DIn-Rail mounting kitWallmount kitPower adaptor 12 V / 1,5 A

SERIAL INTERFACE PC-CARDSSerial High speed-interface units with 2 or 4 COM ports, 16 or 128 bytes FIFO and in widerange adjustable transfer speed are the most cost-efficient solution to install further COMboards in PC systems. The cards fulfill the UPCI speci fication and can be operated on allcurrent boards. As a variation, low profile cards with lower dimensions are available.

Other constructions on request!

COMMUNICATION

38

Technical dataSerial Device server, 9.6-460kBd, 10/100Mbps Ethernet RJ45, incl. driver CD. Driver Modes: Port COM Mapping, zero modem tunnel, tCP RAW mode,

server/client, UDP. Protocols: tCP/IP, UDP, telnet, DHCP, ICMP, HttP, DnA, SnMP v1/2c/3-rd. Configuration: Driver control panel, web browser, telnet, SnMP.

rene

39

From the VIPA ecoPanels up tothe high performance VIPA Multitouch PCs, VIPA has the completerange of HMIs.

the new intelligence of the hardware confi-guration, the intuitive user interface and thesystem openness make SPEED7 Studio thepowerful and easy-to-use tool.

With the VIPA teleservice-Modulesyou have a safe and fail-proofsolution to service equipment.

Vipa Controls increases the productivity of your plants and machinery.

samosPRO is a fast, compact, modularsafety controller for monitoring and controlling mechanical and system engineering applications.

the SLIO bus terminals areboundless usable with allother CPU-manufacturers.

the GA700 has usable functionsto satisfy all requirement – onecan do all.

the new Sigma 7 Servo is developedfor high production speed and maximumof general plant safety.

High quality with phenomenal performance has a name: MOtOMAn robots

TOTAL SYSTEM SOLUTIONS

rene

rene

catalog - gogatec kabelverschraubungen relais emv …€¦ · · 2017-02-07other manufacturers is...

Documents