catalog no. date project type k6sar | 6 led ...16' 5.0 13.3 fixture delivered lumens: 1151.1...

DATE PROJECT TYPE

CATALOG NO.

REV1220

CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.

K6SAR | 6" LED Remodel Non-IC StopAire Downlight

1. TRIAC and ELV dimming for 120V only.2. Lutron Hi-Lume dimming only available in 120V.

1-7/8"

2-15/16"

5-1/4"

15-9/16"

6-15/16"

15"

1. Lumen values are approximate, see photometric test results

WATTAGE

LUMEN OUTPUT1

COLOR TEMPERATURE

CRI

SYSTEM RATING

DRIVER INPUT WATTAGE

DRIVER INPUT CURRENT (A) 120/277

DRIVER INPUT VOLTAGE120V Dimming (Triac, ELV, 0-10V)

277V Dimming (0-10V)Lutron HiLume® Dimming

Lutron EcoSystem® Dimming

DRIVERPower Factor

THD

LISTING

WARRANTY

10W 14W 20W

900Lm 1200Lm 1600Lm

2700K, 3000K, 3500K, 4000K

90+

50,000 Hours @ 70% Lumen Maintenance

10W 14W 20W

.08/.03 .12/.05 .17/.08

120V AC, 50/60Hz277V AC, 50/60Hz120V AC, 50/60Hz120-277V AC, 50/60Hz

> 0.90< 20%

cCSAus Certified to UL StandardsSuitable for damp locationsAll housing options (except those with Lutron dimming options) are ENERGY STAR® Certified with the following trims only:

– CTR3002(-PL, -CLR, -WHT, -BLK)– CTR3002-B-BLK– CTR3001H(-WHT, -P)– CTR3001(-WHT, -P, -B)

Conforms to Washington State Energy code (WSEC) for low air infiltration; tested in accordance with ASTM E283 (2.0 CFM or less)

Five (5) Year Replacement after Date of Purchase

Ceiling Opening: 6-1/2"Ceiling Thickness: 1/2" – 5/8"

P1

Ordering Information

Housing/LED SeriesK6SAR1 - 10W 900lm K6SAR2 - 14W 1200lm K6SAR3 - 20W 1600lm

Electrical/DimmingMVD1 - Triac, ELV, 0-10V12D32 - Lutron Hi-Lume 1% 2-Wire LED Driver (120V Forward Phase Only)MVD4 - Lutron Hi-Lume 1% EcoSystem LED Driver with Soft-on, Fade-to-Black

Beam Dist.S - SpotF - FloodW - Wide Flood

Replacement OpticsK6OPTS - Spot Optic K6OPTF - Flood Optic K6OPTW - Wide Flood Optic

Example Order: K6SAR327KCMVDW

Color TempHigh CRI 90+ 27KC - 2700K30KC - 3000K35KC - 3500K40KC - 4000K

DATE PROJECT TYPE

CATALOG NO.

REV1220



P2

Features• Aluminum housing and heat-sink with galvanized steel mounting

arm and junction box; requires minimum 3" clearance around fixture from insulation material. Thermal protection provided in case of improper insulation use.

• Housing secured to ceiling by four (4) spring clamps• Output over-voltage, over-current and short circuit protection• Approved for through-circuit wiring; max: (4) #12 AWG (2 in/2

out); wiring should be rated for at least 90°C• Engineered optical system consists of a thermo-plastic optical

housing, aluminum reflector and highly transmissive diffusion lens• Light engine consists of a single, high output multi-chip LED array• Excellent fixture to fixture color consistency within a 3-step

MacAdam Ellipse tolerance• Many trim options available to complement any design style; see

attached trim spec sheet for information and details

Performance Summary• System provides a smooth uniform beam while eliminating view

of LED array• Three beam distributions available; optics are field interchangeable• All K6SAR LED downlights are available for non-dimming and

dimming applications; for a list of compatible dimmers, refer to the Dimming Specifications sheet

• All housing options (except those with Lutron dimming options) are ENERGY STAR® Certified with the following trims only:– CTR3002(-PL, -CLR, -WHT, -BLK)– CTR3002-B-BLK– CTR3001H(-WHT, -P)– CTR3001(-WHT, -P, -B)

• Conforms to Washington State Energy Code (WSEC) for low air infiltration; tested in accordance with ASTM E283 (2.0 CFM or less)

• Assembled in the USA

WarrantyThis complete fixture is covered by ConTech’s full five (5) year replacement guarantee after date of purchase

Product Details

CTR1912-P Albalite Shower Trim 5" I.D, 8-1/8" O.D.

Wet location listed. Flat Albalite glass. Beveled white steel trim ring. Polyethylene gasket. Two (2) torsion springs.

CTR1913-P Fresnel Shower Light Trim 5" I.D, 8-1/8" O.D.

Wet location listed. Beveled white steel trim ring. Polyethylene gasket. Flat, clear Fresnel glass lens. Two (2) torsion springs.

CTR1916-P Drop Opal Shower Light Trim, Glass Lens5" I.D, 7-7/8" O.D., 1" Drop

Wet location listed. Beveled white steel trim ring. Polyethylene gasket. Two (2) torsion springs.

CTR1916-PP Drop Opal Shower Light Trim, Plastic Lens5" I.D, 7-7/8" O.D., 1-1/2" Drop

Wet location listed. Beveled white high-heat ABS trim ring. Polyethylene gasket. Two (2) torsion springs.

CTR3001H SeriesHelical Phenolic Baffle5-3/4" I.D, 7-1/2" O.D.

Painted Steel Trim Ring. Two (2) coiled springs.

CTR3001 SeriesTapered Steel Baffle5-3/4" I.D, 7-1/2" O.D.

Tapered Steel Baffle. Thermoplastic trim ring. Two (2) coil springs.

CTR3002-B-BLKTapered Steel Specular Reflector5-3/4" I.D, 7-1/8" O.D.

Black Reflector, Black Trim Ring. Two (2) coiled springs.

CTR3002 SeriesTapered Aluminum Reflector5-3/4" I.D, 7-1/8" O.D.

White high heat rated ABS beveled trim ring. Two (2) coiled springs.

CTR3002-WHTWhite Multiplier5-3/4" I.D, 7-1/8" O.D.

White high heat rated ABS beveled trim ring. Two (2) coiled springs.

CTR3001-BBlack Baffle

Black Trim Ring

CTR3001-P Black Baffle

White Trim Ring

CTR3001-WHTWhite Baffle

White Trim Ring

CTR3002-BLKBlack Specular Reflector

White Trim Ring

CTR3002-CLR Clear Specular Reflector

White Trim Ring

CTR3002-PLPlatinum ReflectorWhite Trim Ring

CTR3001H-P Black Baffle

Matte White Trim Ring

CTR3001H-WHTWhite Baffle

Matte White Trim Ring

Trims for K6 Series LED Recessed Downlights

DATE PROJECT TYPE

CATALOG NO.

REV1220


DATE PROJECT TYPE

CATALOG NO.

REV1220



Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770

30

15

0

Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770

30

15

0

Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770

30

15

0

0 90°

15°0° 30°

45°8020

4050

12000

75°

60°

0 90°

15°0° 30°

45°1000

550

1400

75°

60°

0 90°

15°0° 30°

45°580

320

800

75°

60°

P3

Candela Curve

Lumen output values fluctuate based on CCT. To estimate lumen output of the various CCT options, multiply 3000K results by the following:

Photometrics

Photometric Multiplication Factors

Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)

6' 282.9 1.2

8' 159.2 1.6

10' 101.9 2.0

12' 70.7 2.4

14' 52.0 2.8

16' 39.8 3.2

K6SA230KCMVDS/CTR3002-PLFixture Delivered Lumens: 1096.4Total Watts@120V: 13.6Lumens Per Watt: 80.6Center Beam Candle Power: 10186Beam Distribution: 11°Spacing Criterion: 0.19Color Rendering Index (CRI)1: 92Color Temperature (CCT)2: 3180KDesigned for 50,000 Hour Lamp Life3

LM-63 Test No. G20062903LM-79 Test No. S20070103

Candela Curve Spectral Power Distribution Chart4

Intensity Distribution

BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)

6' 35.5 5.0

8' 20.0 6.7

10' 12.8 8.3

12' 8.9 10.0

14' 6.5 11.6

16' 5.0 13.3

Fixture Delivered Lumens: 1151.1Total Watts@120V: 13.6Lumens Per Watt: 84.6Center Beam Candle Power: 1277Beam Distribution: 45°Spacing Criterion: 0.80Color Rendering Index (CRI)2: 91Color Temperature (CCT)3: 3183KDesigned for 50,000 Hour Lamp Life3


K6SA230KCMVDF/CTR3002-PLSpectral Power Distribution Chart4

Candela CurveIntensity Distribution

BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)

6' 21.5 8.0

8' 12.1 10.7

10' 7.7 13.4

12' 5.4 16.1

14' 3.9 18.7

16' 3.0 21.4

Fixture Delivered Lumens: 1094.5Total Watts@120V: 13.6Lumens Per Watt: 80.5Center Beam Candle Power: 772Beam Distribution: 68°Spacing Criterion: 1.03Color Rendering Index (CRI)2: 91Color Temperature (CCT)3: 3161KDesigned for 50,000 Hour Lamp Life3


K6SA230KCMVDW/CTR3002-PLSpectral Power Distribution Chart4

1. Accuracy of rendering colors 2. Color appearance of light source 3. Dependent on surrounding temperatures 4. Colors present within the light source

CCT SERIES 1 SERIES 2

2700K 0.9 0.57 0.76

3000K 1.0 0.57 0.76

3500K N/A 0.57 0.76

4000K 1.0 0.57 0.76

K4 SERIES* K6 SERIES* Dimming Options MVD Dimming Range

Manufacturer Product Model Light Output

Leviton IllumaTech IPL06-10z 3%-100%

Leviton IllumaTech IPI06-1LZ 17%-100%

Leviton SureSlide R62-6674 17%-100%

Leviton SureSlide R62-6633 >1%-100%

Lutron Skylark NT-600 >1%-100%

Lutron Diva DV600P 1%-100%

Lutron Diva DVLV-600P 3%-100%

Lutron D-600P 3%-100%

Lutron Diva DVCL-153P 2%-100%

Lutron Maestro MACL-153M 3%-100%

Cooper R1061-LA 7%-100%

Cooper Devine DAL06P-C1 >1%-100%

Cooper TAL06P-C1 >1%-100%

Cooper SAL06p >1%-100%

Cooper Decorator DAL06P-C2 >1%-100%

*277V Triac Dimming is not available

• Incandescent 120VAC dimmers adjust the light with “forward phase control”, where the dimmer “chops” the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required.

• Electronic vow voltage 120VAC dimmers adjust the light with “reverse phase control,” where the dimmer “chops” the back part of the AC wave to deliver less or more power to the light source. Neutral wire connection required.

• 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmer sends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray).

• Lutron HiLume and EcoSystem dirvers provide continuous dimming from 1%-100%. For a complete list of compatible dimmers and controls, please visit www.lutron.com

DIMMING SPECIFICATIONS | K4 and K6 Series

Notes1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information.5. Consult factory for additional dimming information.

REV1020


DATE PROJECT TYPE

CATALOG NO.

catalog no. date project type k6sar | 6 led ...16' 5.0 13.3 fixture delivered lumens: 1151.1...

Documents