catalog - rocket rack® · rocket rack® u.s. patents: d608,183 s, d599,194 s, d599,193 s, d653,524...
TRANSCRIPT
ROCKET RACK® Sanitary Support System For Electrical & Mechanical Installations
www.rocket-rack.com903.680.4222 [email protected]
Don't see the size you need? Call 903.680.4222.
ROCKET RACK® TENTEDTM
U.S. Patent #D653,524 S
ROCKET RACK® Tented™ is fabricated with the slot and mounting holes cut on the heel of the angle and hung trapeze style from ceiling of structure using ROCKET ROD™. ROCKET RACK® Tented™ is used to support process pipe & electrical conduit or cable tray. Hygienic design features sloped sides (45°) to eliminate a horizontal ledge where dirt and bacteria can accumulate. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run, creating a beautiful installation, even suitable for high-end residential or commercial buildings. Pipe & conduit are secured with U-Bolts or ROCKET STANDOFFS™ & approved sanitary clamps. Made from 2x2x1/4 Angle, ROCKET RACK® Tented™ is pre-engineered to withstand heavy loads. Radius corners for added safety.
Length (in inches) refers to overall length of the rack, NOT to the length of the slot. We can fabricate racks almost any length and width. Just let us know the center to center distance between mounting holes. Call for pricing and lead time on lengths not listed here or racks made from 316 Stainless.
FACTORY STOCK AVAILABLE FOR TENTEDTM RACKS LISTED BELOW
ROCKET RACK® Tented™ is supplied with specially-designed
stainless mounting hardware – 3/8" or 1/2" – leaving no gaps or
spaces between the rack and mounting rod.
PART NUMBER DESCRIPTION
RRTNT304123/8 RRTNT304121/2 RRTNTALU123/8 RRTNTALU121/2 12" ROCKET RACK® TentedTM | 2x2x1/4
RRTNT304243/8 RRTNT304241/2 RRTNTALU243/8 RRTNTALU241/2 24" ROCKET RACK® TentedTM | 2x2x1/4
RRTNT304483/8 RRTNT304481/2 RRTNTALU483/8 RRTNTALU481/2 48" ROCKET RACK® TentedTM | 2x2x1/4
RRTNT304183/8 RRTNT304181/2 RRTNTALU183/8 RRTNTALU181/2 18" ROCKET RACK® TentedTM | 2x2x1/4
RRTNT304363/8 RRTNT304361/2 RRTNTALU363/8 RRTNTALU361/2 36" ROCKET RACK® TentedTM | 2x2x1/4
RRTNT304303/8 RRTNT304301/2 RRTNTALU303/8 RRTNTALU301/2 30" ROCKET RACK® TentedTM | 2x2x1/4
3/8" HDW304 STAINLESS 6061-T6 ALUM.
3/8" HDW1/2" HDW 1/2" HDW
1
SPECIALTY MOUNTING HARDWARE INCLUDED
A
B
www.rocket-rack.com Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
Specially-designed stainless mounting hardware supplied with tented angle, one set per mounting hole. Please specify rod size – 3/8" or 1/2"
ROCKET RACK® TENTEDTM ASSEMBLY DETAILSU.S. PATENT NO. D653,524 S
DIMENSIONS
A: 1 7/8" when using 1/2" rod or 3/8" rod
B: 7/8" when using 1/2" rod or 3/8" rod
Simply cut your ROCKET ROD® one inch longer than where you want to place the bottom of your pipe. Then skin off Dimension A and you are ready to install!
ROCKET RACK® TENTEDTM
2
ROCKET RACK Tented is ideally suited for use with rigid conduit—Stainless, aluminum or galvanized steel–anchored with ROCKET RACK Stainless U-Bolts. Please note that when using thin-walled tubing or coated conduit we recommend standing off the rack with ROCKET Standoff™ and a sanitary clamp (each sold separately—See ROCKET RACK Stainless Hardware). ROCKET RACK Tented supplied with specially-designed mounting hardware. All other items sold separately.
NSF InternationalFounded in 1944, NSF International is an independent, accredited organization, that tests, audits and certifies products and systems.
NSF CertificationRecognized by regulatory agencies at the local, state, federal and international level, NSF certification demonstrates that a product complies with all standard requirements. NSF conducts periodic facility audits and product testing to verify that the product continues to comply with the standard.
The NSF mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today. It is valued by consumers, manufacturers, retailers and regulatory agencies worldwide.
The NSF certification mark on a product means that the product complies with all standard requirements. NSF conducts periodic unannounced inspections and product testing to verify that the product continues to comply with the standard.
The mark provides:* Knowledge that an impartial review against established criteria or guidelines has been conducted* Evidence that product labeling and claims have been objectively reviewed by a trusted third party* Backing by a team of professionals dedicated to public health and safety operating in more than 170 countries around the world
Robroy Industries Rocket Rack Products have been tested & certified under the Food Safety and Quality Product/System Category to standard NSF/ANSI/3-A 14149-1 -2014.
About NSF
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
ROCKET RACK® STANDARDU.S. Patent #’s D608,183 S & D599,194 S
ROCKET RACK® Standard is fabricated with the slot and mounting holes cut into the leg of the angle and hung trapeze style from ceiling of structure using ROCKET ROD™. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run, creating a beautiful installation, even suitable for high-end residential or commercial buildings. Pipe & conduit are secured with ROCKET RACK U-Bolts or ROCKET STANDOFFS™ & approved sanitary clamps. Made from 2x2x1/4 Angle, ROCKET RACK® Standard is engineered to withstand heavy loads. Radius corners for added safety.
Length (in inches) refers to overall length of the rack, NOT to the length of the slot. We can fabricate racks almost any length and width. Just let us know the center to center distance between mounting holes. Call for pricing and lead time on lengths not listed here or racks made from 316 Stainless.
FACTORY STOCKAVAILABLE FOR STANDARD
RACKS LISTED BELOW
ROCKET RACK® Standard can be installed using a Serrated
Flange Nut, a Nyloc Flange Nut and ROCKET ROD™, ALL SOLD
SEPARATELY
PART NUMBERDESCRIPTION
RRSTD30412 RRSTDALU12 12" ROCKET RACK® Standard | 2x2x1/4
RRSTD30424 RRSTDALU24 24" ROCKET RACK® Standard | 2x2x1/4
RRSTD30448 RRSTDALU48 48" ROCKET RACK® Standard | 2x2x1/4
RRSTD30418 RRSTDALU18 18" ROCKET RACK® Standard | 2x2x1/4
RRSTD30436 RRSTDALU36 36" ROCKET RACK® Standard | 2x2x1/4
RRSTD30430 RRSTDALU30 30" ROCKET RACK® Standard | 2x2x1/4
6061-T6ALUMINUM
304 STAINLESS
903.680.4222 [email protected]
Don't see the size you need? Call 903.680.4222.3
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
ROCKET RACK® STANDARD
903.680.4222 [email protected]
Don't see the size you need? Call 903.680.4222.4
ROCKET RACK® FLAT
PART NUMBERDESCRIPTION
RRFR0412 RRFRALU12 12" ROCKET RACK® Flat | 2x1/4
RRFR0424 RRFRALU24 24" ROCKET RACK® Flat | 2x1/4
RRFR0448 RRFRALU48 48" ROCKET RACK® Flat | 2x1/4
RRFR0418 RRFRALU18 18" ROCKET RACK® Flat | 2x1/4
RRFR0436 RRFRALU36 36" ROCKET RACK® Flat | 2x1/4
RRFR0430 RRFRALU30 30" ROCKET RACK® Flat | 2x1/4
6061-T6ALUMINUM
304 STAINLESS
FACTORY STOCKAVAILABLE FOR FLAT RACKS
LISTED BELOW
ROCKET RACK® Flat can be installed using a Serrated Flange
Nut, a Nyloc Flange Nut and ROCKET ROD™, ALL SOLD
SEPARATELY
U.S. Patent #D649,863 S
ROCKET RACK® Flat is used for vertical or horizontal pipe runs along the wall. It is mounted off the wall several inches using ROCKET ROD™ for easy access during cleaning. ROCKET RACK® Flat can also be used with the ROCKET RACK® Post Mount System. Patented slot design allows for additional lines to be added at a future time and assures a perfectly straight run, creating a beautiful installation, suitable even for high-end residential or commercial buildings. Pipe & conduit are secured with ROCKET RACK U-Bolts or ROCKET STANDOFFS™ & approved sanitary clamps. Made from 2x1/4 Flat Stock with radius corners for added safety.
ROCKET RACK® Flat IS FOR WALL AND POST MOUNT INSTALLATIONS ONLY. NEVER HANG FLAT STOCK TRAPEZE STYLE.
Length (in inches) refers to overall length of the rack, NOT to the length of the slot. We can fabricate racks almost any length and width. Just let us know the center to center distance between mounting holes. Call for pricing and lead time on lengths not listed here or racks made from 316 Stainless.
ROCKET RODTM
by ROCKET RACK®
ROCKET ROD™ – 304S or Zinc-plated all-thread rod with FDA-CertifiedPVC encasement – is available in ¼" – ¾" diameters and 6’ & 12’ lengths. A proprietary manufacturing process ensures the encasement is tight and snug making it clean and smooth with no exposed threads – perfect for food and beverage-grade installations.
The installer simply cuts the rod to length, uses a utility knife to strip away the amount of FDA-Certified encasement to reveal precisely the threads needed, then mounts the rack. No on-site threading of rod saves time and substantial-ly reduces the danger of product contamination, while increasing on-the-job safety.
PART NUMBER
PART NUMBER DESCRIPTION
DESCRIPTION
ROCKET RODTM | 1/4"- 20x6' PVC Encasement ATR
ROCKET RODTM | 1/2"- 13x6' PVC Encasement ATR | FDA cert. PVC
ROCKET RODTM | 3/8"- 16x12' PVC Encasement ATR | FDA cert. PVC
ROCKET RODTM | 3/8"- 16x6' PVC Encasement ATR | FDA cert. PVC
ROCKET RODTM | 3/4"- 10x6' PVC Encasement ATR | FDA cert. PVC
ROCKET RODTM | 5/8"- 11x6' PVC Encasement ATR | FDA cert. PVC
ROCKET RODTM | 1/2"- 13x12' PVC Encasement ATR | FDA cert. PVC
RRPVC304061/4
RRPVC304061/2
RRPVC304123/8
RRPVC304063/8
RRPVC304063/4
RRPVC304065/8
RRPVC304121/2
304 STAINLESS
RRPVCZNC061/4
RRPVCZNC061/2
RRPVCZNC123/8
RRPVCZNC063/8
RRPVCZNC063/4
RRPVCZNC065/8
RRPVCZNC121/2
Zinc-Plated
FACTORY STOCKAVAILABLE FOR ROCKET RODTM
LISTED BELOW
6 ft.
12 ft.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
Don't see the size you need? Call 903.680.4222.5
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
Don't see the size you need? Call 903.680.4222.6
PART NUMBER DESCRIPTION
PART NUMBER
PART NUMBER DESCRIPTION
PART NUMBER
DESCRIPTION
DESCRIPTION
RRHDWSUBS1/2
RRHDWSSERFLN3/8
RRHDWSRODCUP3/8
RRHDWSBEVNUT3/8
1/2" U-Bolt, 3/8" - 16, for 1/2" Rigid Pipe/Conduit
3/8"- 16 Serrated Flange Nut
3/8"- 16 Rod Coupler 11/16" Heavy Hex x 1_1/8" Long
3/8" Beveled Nyloc Nut, can be used with U-Bolts on ROCKET RACK® Tented™
RRHDWSUBS1 1" U-Bolt, 3/8" - 16, for 1" Rigid Pipe/Conduit
RRHDWSUBS2
RRHDWSUBS4
2" U-Bolt, 3/8" - 16, for 2" Rigid Pipe/Conduit
4" U-Bolt, 3/8" - 16, for 4" Rigid Pipe/Conduit
RRHDWSUBS3/4
RRHDWSSERFLN1/2
RRHDWSRODCUP1/2
3/4" U-Bolt, 3/8" - 16, for 3/4" Rigid Pipe/Conduit
1/2"- 13 Serrated Flange Nut
1/2"- 13 Rod Coupler 11/16" Heavy Hex x 1_3/4" Long
RRHDWSUBS1-1/2
RRHDWSUBS3-1/2
1_1/2" U-Bolt, 3/8" - 16, for 1_1/2" Rigid Pipe/Conduit
3_1/2" U-Bolt, 3/8" - 16, for 3_1/2" Rigid Pipe/Conduit
RRHDWSUBS1-1/4
RRHDWSUBS3
1_1/4" U-Bolt, 3/8" - 16, for 1_1/4" Rigid Pipe/Conduit
3" U-Bolt, 3/8" - 16, for 3" Rigid Pipe/Conduit
RRHDWSUBS2-1/2
RRHDWSUBNUT3/8
2_1/2" U-Bolt, 3/8" - 16, for 2_1/2" Rigid Pipe/Conduit
3/8" Nyloc Flange Nut, for use with U-Boltsalso available for separate purchase
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Drawn by:
OLD WAY
MM MM/RM 3-2018
SMPL.031318
304 SS
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Drawn by:
OLD WAY
MM MM/RM 3-2018
SMPL.031318
304 SS
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Drawn by:
OLD WAY
MM MM/RM 3-2018
SMPL.031318
304 SS
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Drawn by:
OLD WAY
MM MM/RM 3-2018
SMPL.031318
304 SS
ROCKET RACK® STAINLESS U-BOLTS & HARDWARE
All ROCKET RACK® Hardware is made from 304 Stainless. ROCKET RACK® U-Bolts are custom manufactured to fit ROCKET RACK® products with the least amount of exposed threads, virtually eliminating pathogen harborage points. All U-Bolts are supplied with one pair of Stainless Nyloc Flange nuts. If ordering U-Bolts for Stainless or Copper Tube, please provide Tube O.D.
Nyloc Flange Nuts Included
ROCKET POSTSTM
& POST-TENTED
TM
RACK
ROCKET Posts can be used to run conduit and process pipe vertically or horizontally using our ROCKET RACK Flat or Post-Tented Racks.
ROCKET Posts, made from 2” Sch. 40 304S pipe are sold individually. ROCKET Posts have a weld-sealed cap and mounting plate, (2” Sch 40 304S Butt Welded Cap and 4x6x1/4 304S Mounting Plate with four 9/16” Mounting Holes). Post-Tented Racks are fabricated with the slot in the peak of the angle, but with no mounting holes. These racks are welded to a 2x4x3/8 plate with holes perfectly spaced for use with a 2" ROCKET RACK U-Bolt (sold separately) and milled with a radius that fits the curvature of the post.
B.1
PART NUMBER DESCRIPTION
DESCRIPTIONPART NUMBER
RRPOSTM30448
RRTNT304MOD12
48" ROCKET Post, 2" Sch. 40 Pipe
12" Post-Tented Rack for ROCKET Post, 2x2x1/4
RRPOSTM30472
RRTNT304MOD24
72" ROCKET Post, 2" Sch. 40 Pipe
24" Post-Tented Rack for ROCKET Post, 2x2x1/4
RRPOSTM30496
RRNTT304MOD48
96" ROCKET Post, 2" Sch. 40 Pipe
48" Post-Tented Rack for ROCKET Post, 2x2x1/4
RRPOSTM30460
RRTNT304MOD18
60" ROCKET Post, 2" Sch. 40 Pipe
18" Post-Tented Rack for ROCKET Post, 2x2x1/4
RRPOSTM30484
RRTNT304MOD36
84" ROCKET Post, 2" Sch. 40 Pipe
36" Post-Tented Rack for ROCKET Post, 2x2x1/4
RRPOSTM30478
RRTNT304MOD30
RRPOSTM304120
78" ROCKET Post, 2" Sch. 40 Pipe
30" Post-Tented Rack for ROCKET Post, 2x2x1/4
120" ROCKET Post, 2" Sch. 40 Pipe
RRPOSTM304108 108" ROCKET Post, 2" Sch. 40 Pipe
A.1
Figure A.1 shows ROCKET RACK Flat affixed to two ROCKET Posts using ROCKET RACK U-Bolts creating a vertical mounting system. This system is a quick and versatile way to attach disconnects, operator interface panels or mechanical devices, such as water-flow meters and valves. This same system can be used to run conduit or cable tray vertically.
Figure B.1 shows Post-Tented Rack affixed to two ROCKET Posts using ROCKET RACK U-Bolts. This system is used in instances requiring horizontal pipe runs along equipment where other mounting means are unavailable or unfeasible. It provides a quick and sanitary installation that allows for fine adjustments. The installer can add pipe runs without drilling or welding in the field.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
Don't see the size you need? Call 903.680.4222.7
Post-Tented™ Rack
Figure A.2 shows two ROCKET Posts that are spanned by ROCKET RACK® Flat. In this example the system is supporting a disconnect, and the conduit runs vertically.
Figure B.2 shows four ROCKET Posts, each pair spanned by Post-Tented Racks supporting conduit and cable tray horizontally independent of an attachment point, such as a wall.
A.2 B.2
ROCKET Post, ROCKET RACK® Flat, Post-Tented Racks and U-Bolts all sold separately. Call for pricingand lead times for ROCKET Post System.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
8
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
9
ROCKET RACK® CUSTOMIZABLE ROCKET POSTSTM
ROCKET Posts are useful when no other means of fastening conduit or process pipe is available. This system allows the installer to bring conduit, basket tray or process piping down to the next to equipment, process lines or conveyors. It provides a secure and sanitary way to feed devices and equipment and gives a very clean and sleek-looking installation that is completely adjustable. ROCKET Post System can be tailored to suit your needs, as posts and racks are customizable in height and length.
SINGLE ROCKET POST WITH SANITARY CLAMP: A single conduit is attached to a single ROCKET Post by means of Sanitary Clamps.
ROCKET POSTS WITH POST-TENTED CANTILEVER:Similar to Post-Tented Racks – no mounting holes, slots only – but only one end is fitted with a welded plate. Here two Post-Tented Cantilever Racks are mounted to two ROCKET Posts by means of ROCKET RACK U-Bolts.
ROCKET POSTS WITH ROCKET RACK® FLAT, WELDED: A multiple conduit run is supported by ROCKET RACK Flat. The Flat racks are secured to the Posts by means of a ROCKET Spacer™, with a clean, tight, sanitary weld. Distance of ROCKET RACK Flat from Post is customizable by changing the length of ROCKET Spacer.
ROCKET RACK® STANDARD POSTS: Similar to the ROCKET Post System, but based on our Standard rack design. Our Standard Posts provide a more economical way to run conduit & process pipe along conveyors and equipment. Basket tray is attached to Standard Posts with Niedax Clamps (see Sanitary Clamp page).
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
10
ROCKET PLATETM
for INSULATED METAL PANEL WALLS (IMP)and other wall mounting applications
IMP Walls provide a sanitary finish that can be easily washed down and withstand harsh chemical cleaning. Many food manufacturers are using IMP walls in the construction of their facilities. The inset above shows an IMP wall cutaway and how the ROCKET Plate is anchored using a FAB-LOK® Fastener, which provides a secure fit and high resistance to vibration loosening. ROCKET Plate is a stainless steel plate, 4" x 2" x ¼" with 3/8" mounting holes – center hole threaded to accept rod.
MULTIPLE CONDUIT/PROCESS PIPE RUN: When installing multiple conduit or process pipe runs along an IMP wall, the installer uses ROCKET RACK U-Bolts to attach the run to ROCKET RACK Flat racks (parts listed on facing page). ROCKET RACK Flat stands off the wall with a ROCKET Plate and Bald/Slick Rod.
SINGLE CONDUIT/PROCESS PIPE RUN: When mounting a single conduit or process pipe to the IMP wall, the installer has several options (shown on facing page). The ROCKET Plate can be used with 1) ROCKET ROD®, 2) Bald Rod or 3) ROCKET SpacerTM. These options are customizable according to required distance from the IMP wall. All are pre-assembled & supplied with flange nuts. FAB-LOK® Fastener and Sanitary Clamps sold separately.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
11
ROCKET PLATETM
AND ROCKET PLATE ASSEMBLIES
ASSEMBLY 1: A short piece of ROCKET ROD®, secured with Serrated Flange NutsCOMPONENTS: ROCKET Plate, ROCKET ROD and Two Serrated Flange NutsPART # RRRPLTRRODSET
ASSEMBLY 2: Bald rod threaded on both ends, secured with Serrated Flange NutsCOMPONENTS: ROCKET Plate, Bald Rod and Two Serrated Flange NutsPART # RRRPLTBRODSET
ASSEMBLY 3: All-Thread rod run through ROCKET SpacerTM COMPONENTS: ROCKET Plate, All-Thread Rod (no exposed threads), and ROCKET Spacer PART # RRRPLTSPCRSET
ALL ASSEMBLIES LISTED HERE: • Distance X from wall customizable• Call for Pricing & Lead Time• FAB-LOK® Fasteners and Sanitary Clamps Sold Separately
Dra
win
g N
umbe
r:
Dra
win
g Tit
le:
AA
BB
22
11
Dat
e:M
ater
ial:
ROCK
ET R
ACK®
86
6-48
1-88
99
Uniq
ue M
etal
Sol
utio
ns, L
LCPO
Box
133
Gra
y Su
mm
it, M
O 6
3039
rock
et-ra
ck.c
om
Apr
vd b
y:D
raw
n by
:
OLD
WAY
MM
MM
/RM
3-20
18
SMPL
.031
318
304
SS
X
Dra
win
g N
umbe
r:
Dra
win
g Tit
le:
AA
BB
22
11
Dat
e:M
ater
ial:
ROCK
ET R
ACK®
86
6-48
1-88
99
Uniq
ue M
etal
Sol
utio
ns, L
LCPO
Box
133
Gra
y Su
mm
it, M
O 6
3039
rock
et-ra
ck.c
om
Apr
vd b
y:D
raw
n by
:
OLD
WAY
MM
MM
/RM
3-20
18
SMPL
.031
318
304
SS
X
Dra
win
g N
umbe
r:
Dra
win
g Tit
le:
AA
BB
22
11
Dat
e:M
ater
ial:
ROCK
ET R
ACK®
86
6-48
1-88
99
Uniq
ue M
etal
Sol
utio
ns, L
LCPO
Box
133
Gra
y Su
mm
it, M
O 6
3039
rock
et-ra
ck.c
om
Apr
vd b
y:D
raw
n by
:
OLD
WAY
MM
MM
/RM
3-20
18
SMPL
.031
318
304
SS
X
PART NUMBER DESCRIPTION
RRRPLATE304 ROCKET PlateTM FOR IMP, 304S, 4" X 2" X ¼"
RRRPLTBRODSET ROCKET PlateTM BROD SET (ASSEMBLY 2)
RRRPLTRRODSET ROCKET PlateTM RROD SET (ASSEMBLY 1)
RRRPLTSPCRSET
RRRHDWSFAB230
ROCKET PlateTM SPCR SET (ASSEMBLY 3)
FAB-LOK FOR MOUNTING RPLT TO IMP WALL
ROCKET PLATE & ACCESSORIES
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
12
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
13
PART NUMBER
PART NUMBER
DESCRIPTION
DESCRIPTION
RRBCLMPIPE1
RRHDWSSNDOFF
RRHDWSTSNDOFF
RRHDWSHEXBOLT
RRHDWSNIEDSET
Behringer® Compact Threaded Anchor for 1" Pipe/Conduit
ROCKET StandoffTM
TALL ROCKET StandoffTM
ROCKET Bolt™
NIEDAX UNIVERSAL WIRE MESH MOUNTING BRACKET SET
RRBCLMPVC75 Behringer® Compact Threaded Anchor for 3/4" PVC Coated Conduit
RRBCLMPIPE2 Behringer® Compact Threaded Anchor for 2" Pipe/Conduit
FOR SANITARY CLAMP ON TOP OF TNT RACK1"D x 1"L
FOR SANITARY CLAMP ON TOP OF TNT RACK1"D x 2"L
FOR SANITARY CLAMP ON UNDERSIDE OF TNT RACKBEVELED CUSTOM BOLT, 3/8"-16 x 11/16"Hex X 2_1/8"L
FOR USE WITH CABLE TRAYINCLUDES: NIEDAX CLAMP, ¼"-20 BUTTON FLANGE HEAD SCREW AND ¼"-20 NYLOCK FLANGE NUT
RRBCLMPVC1
RRBCLMPVC125
Behringer® Compact Threaded Anchor for 1" PVC Coated Conduit
Behringer® Compact Threaded Anchor for 1_1/4" PVC Coated Conduit
STAINLESS SANITARY PIPE CLAMPS & ACCESSORIES
ROCKET Bolt™: Used on the underside of ROCKET RACK Tented, securing the ROCKET Standoff. Beveled shoulders of bolt fit snugly into the peak of the angle, leaving no gaps or spaces where dirt or bacteria could collect.
BEHRINGER, 304SRRHDWSSNDOFF
NIEDAX BRACKETS
RRHDWSHEXBOLT
ROCKET StandoffTM: Used for installing Sanitary Clamps on ROCKET RACK Tented™ racks. Specially designed to fit the sloping sides of ROCKET RACK Tented, leaving NO gaps or spaces where bacteria or dirt could collect.
Don't see the size you need? Call 866.481.8899.
Don't see the size you need? Call 903.680.4222.
ROCKET RINGS®: A Cable Management/Mounting System, available threaded or unthreaded, to secure cabling for devices and drives on conveyors, skids or equipment.
ROCKET SPACERTM: Used to mount equipment, conduit, process pipe or ROCKET RACK Flat away from the wall or other structure to maintain desired distance for easy cleaning. One-inch diameter, available in various lengths, threaded or unthreaded.
PART NUMBER
PART NUMBER
PART NUMBER
DESCRIPTION
DESCRIPTION
DESCRIPTION
RRHDWSRRING11/4
RRBROD304123/8
ROCKET RING® ¼"D x 1_1/4"L
304S BALD/SLICK ROD, 3/8"D x 12'L
RRHDWSRRING2
RRBROD304121/2
RRHDWSSPCR1
ROCKET RING® ¼”D x 2"L
304S BALD/SLICK ROD, 1/2"D x 12'L
1"D x 1"L ROCKET SpacerTM
ROCKET RACK® STAINLESS HARDWARE & ACCESSORIES
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
14Don't see the size you need? Call 903.680.4222.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
15
The ROCKET RACK® slots are to be used for securing conduit and process pipe fasteners (U-Bolts, ROCKET STANDOFF™, Sanitary Clamps, etc.) only. The proprietary slot is NOT to be used as a means of installing the ROCKET RACK itself. The ROCKET RACK should be installed using only the mounting holes provided.
ROCKET RACK FLAT is for WALL MOUNT & POST MOUNT ONLY!
ROCKET RACK is a pre-engineered product. Do not attempt to cut or alter the ROCKET RACK product in any way. The load ratings provided in this document only apply to unaltered ROCKET RACK products. Robroy Industries, dba ROCKET RACK disclaims all potential liability that may result from improper installation of the ROCKET RACK product or from cutting the rack or changing the size of the slot or mounting holes. You agree to indemnify and hold Robroy Industries harmless from any loss, damage, claim, cost, or expense incurred or suffered by Robroy Industries relating to any ROCKET RACK product that you improperly installed or altered in any way.
Manufacturing the patented ROCKET RACK Conduit & Pipe Support Racks without the permission of Robroy Industries (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. Robroy Industries respects intellectual property rights and expects to have its rights respected. Robroy Industries has invested considerable resources in protecting its intellectual property, and fully intends to vigorously protect these assets against any infringement or other unlawful actions.
ROCKET RACK U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
LOAD RATINGS
***ATTENTION***
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
16
LOAD RATINGSROCKET RACK® TENTEDTM
U.S. PATENT NO. D653,524 S
• These slots and mounting holes are centered on the heel of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load ratings are based on an allowable stress equal to 60% of the material's Yield Stress, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
LOAD RATINGS ARE LISTED FOR TWO MATERIALS HAVING THE FOLLOWING PROPERTIES:
Material
304/316 Stainless Steel
6061-T6 Aluminum
Yield Stress (KSI)
30
37
Mod of Elasticity (KSI)
28100
10000
6 SLOT TENTEDTM
1 SLOT TENTEDTM
OVERALL LENGTH
SLOT LENGTH SLOT LENGTH SLOT LENGTH SLOT LENGTH SLOT LENGTH SLOT LENGTH
0.394" 1"
2" 916 "
1"
2"
SLOT LENGTH
OVERALL LENGTH
916 "
1"
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Patented: Drawn by:
ROCKET RACK® Tented™
D653,524S MM MM/RM 2-2018
TNT.
.394" wide slot
1"
2"
SLOT LENGTH
OVERALL LENGTH
916 "
1"
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Patented: Drawn by:
ROCKET RACK® Tented™
D653,524S MM MM/RM 2-2018
TNT.
.394" wide slot
• These slots and mounting holes are centered on peak or heel of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
17
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
0.720 0.2990.0642 0.1074
PART NUMBEROverall
RRTNT30412 | RRTNT31612 12"
14"
16"
18"
20"
22"
24"
26"
28"
30"
32"
34"
36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
773
644
552
483
429
386
351
322
297
276
258
242
227
215
203
193
184
176
168
161
155
149
143
138
133
0.0089
0.0129
0.0175
0.0229
0.0289
0.0357
0.0432
0.0514
0.0604
0.0700
0.0804
0.0914
0.1032
0.1157
0.1290
0.1429
0.1575
0.1729
0.1890
0.2058
0.2233
0.2415
0.2604
0.2801
0.3004
773
644
552
483
429
386
351
322
297
276
258
242
227
215
203
193
184
176
168
157
144
133
124
115
107
773
644
552
483
429
386
351
322
297
276
258
235
208
186
166
150
136
124
114
104
96
89
82
77
71
1546
1288
1104
966
859
773
703
644
595
552
515
483
455
429
407
386
368
351
336
322
309
297
286
276
267
0.0112
0.0161
0.0219
0.0286
0.0362
0.0447
0.0540
0.0643
0.0755
0.0875
0.1005
0.1143
0.1290
0.1447
0.1612
0.1786
0.1969
0.2161
0.2362
0.2572
0.2791
0.3019
0.3255
0.3501
0.3755
RRTNT30428 | RRTNT31628
RRTNT30420 | RRTNT31620
RRTNT30436 | RRTNT31636
RRTNT30446 | RRTNT31646
RRTNT30416 | RRTNT31616
RRTNT30432 | RRTNT31632
RRTNT30424 | RRTNT31624
RRTNT30440 | RRTNT31640
RRTNT30450 | RRTNT31650
RRTNT30456 | RRTNT31656
RRTNT30414 | RRTNT31614
RRTNT30430 | RRTNT31630
RRTNT30422 | RRTNT31622
RRTNT30438 | RRTNT31638
RRTNT30448 | RRTNT31648
RRTNT30454 | RRTNT31654
RRTNT30418 | RRTNT31618
RRTNT30434 | RRTNT31634
RRTNT30444 | RRTNT31644
RRTNT30426 | RRTNT31626
RRTNT30442 | RRTNT31642
RRTNT30452 | RRTNT31652
RRTNT30458 | RRTNT31658
RRTNT30460 | RRTNT31660
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
ROCKET RACK® TENTEDTM
TentedTM 304 & 316 Stainless 2x2x1/4
1546
1288
1104
966
859
773
703
644
595
552
515
483
455
429
400
361
327
298
273
250
231
213
198
184
172
1546
1288
1104
966
859
773
703
644
569
491
427
376
333
297
266
240
218
199
182
167
154
142
132
123
114
ROCKET RACK® TENTEDTM
U.S. PATENT NO. D653,524 S
• These slots and mounting holes are centered on peak or heel of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
18
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
0.720 0.2990.0642 0.1074
PART NUMBEROverall
RRTNTALU12 12"
14"
16"
18"
20"
22"
24"
26"
28"
30"
32"
34"
36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
0.0310
0.0446
0.0607
0.0792
0.1003
0.1238
0.1498
0.1783
0.2092
0.2427
0.2786
0.3169
0.3578
0.4011
0.4469
0.4952
0.5460
0.5992
0.6549
0.7131
0.7738
0.8369
0.9025
0.9706
1.0412
0.0387
0.0557
0.0758
0.0990
0.1253
0.1548
0.1872
0.2228
0.2615
0.3033
0.3482
0.3962
0.4472
0.5014
0.5587
0.6190
0.6825
0.7490
0.8186
0.8914
0.9672
1.0461
1.1281
1.2133
1.3015
RRTNTALU28
RRTNTALU20
RRTNTALU36
RRTNTALU46
RRTNTALU16
RRTNTALU32
RRTNTALU24
RRTNTALU40
RRTNTALU50
RRTNTALU56
RRTNTALU14
RRTNTALU30
RRTNTALU22
RRTNTALU38
RRTNTALU48
RRTNTALU54
RRTNTALU18
RRTNTALU34
RRTNTALU44
RRTNTALU26
RRTNTALU42
RRTNTALU52
RRTNTALU58
RRTNTALU60
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
ROCKET RACK® TENTEDTM
TentedTM 6061-T6 Aluminum 2x2x1/4
1907
1426
1048
802
634
513
424
356
304
262
228
201
178
158
142
128
116
106
97
89
82
76
70
65
61
1369
951
698
535
422
342
283
238
202
175
152
134
118
106
95
86
78
71
65
59
55
51
47
44
41
953
794
681
596
530
477
433
397
367
340
318
298
280
265
251
238
227
217
207
199
191
183
177
170
164
1907
1589
1362
1192
1059
953
867
794
733
681
636
596
561
530
502
477
454
433
414
397
381
367
353
340
329
953
794
655
501
396
321
265
223
190
164
143
125
111
99
89
80
73
66
61
56
51
47
44
41
38
856
594
437
334
264
214
177
149
127
109
95
84
74
66
59
53
49
44
40
37
34
32
29
27
25
ROCKET RACK® TENTEDTM
U.S. PATENT NO. D653,524 S
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
19
• These slots and mounting holes are centered on peak or heel of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
ROCKET RACK® TENTEDTM ANGLEU.S. PATENT NO. D653,524 S
PART NUMBEROverall
RR3TNT30436 | RR3TNT31636
RR3TNT30444 | RR3TNT31644
RR3TNT30452 | RR3TNT31652
RR3TNT30460 | RR3TNT31660
RR3TNT30440 | RR3TNT31640
RR3TNT30448 | RR3TNT31648
RR3TNT30456 | RR3TNT31656
RR3TNT30464 | RR3TNT31664
RR3TNT30470 | RR3TNT31670
36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
62"
64"
66"
68"
70"
72"
681
643
610
579
552
526
504
483
463
445
429
414
399
386
374
362
351
341
331
0.0649
0.0727
0.0810
0.0898
0.0990
0.1086
0.1187
0.1293
0.1403
0.1517
0.1636
0.1760
0.1888
0.2020
0.2157
0.2298
0.2444
0.2595
0.2750
681
643
610
579
552
526
504
483
463
445
429
414
399
386
374
362
351
341
331
681
643
610
579
552
526
504
483
459
424
393
366
341
319
298
280
263
248
234
1363
1287
1219
1158
1103
1053
1007
965
927
891
858
827
799
772
747
724
702
681
662
0.0811
0.0909
0.1013
0.1122
0.1237
0.1358
0.1484
0.1616
0.1754
0.1897
0.2045
0.2200
0.2360
0.2525
0.2696
0.2873
0.3055
0.3243
0.3437
1363
1287
1219
1158
1103
1053
1007
965
927
891
858
827
799
764
716
672
632
595
562
1363
1287
1219
1147
1040
948
867
796
734
679
629
585
545
510
477
448
421
397
374
RR3TNT30438 | RR3TNT31638
RR3TNT30446 | RR3TNT31646
RR3TNT30454 | RR3TNT31654
RR3TNT30462 | RR3TNT31662
RR3TNT30468 | RR3TNT31668
RR3TNT30442 | RR3TNT31642
RR3TNT30450 | RR3TNT31650
RR3TNT30458 | RR3TNT31658
RR3TNT30466 | RR3TNT31666
RR3TNT30472 | RR3TNT31672
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
TENTEDTM ANGLE ROCKET RACK®
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
1.220 0.5010.3061 0.3217
TentedTM 304 Stainless 3x3x1/4
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
20
• These slots and mounting holes are centered on peak or heel of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
ROCKET RACK® TENTEDTM ANGLEU.S. PATENT NO. D653,524 S
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
1.220 0.5010.3061 0.3217
PART NUMBEROverall
RR3TNTALU36 36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
62"
64"
66"
68"
70"
72"
840
794
752
714
680
649
621
595
571
549
529
510
493
476
461
446
433
420
408
0.2248
0.2520
0.2808
0.3112
0.3431
0.3765
0.4115
0.4481
0.4862
0.5259
0.5671
0.6099
0.6542
0.7001
0.7476
0.7966
0.8471
0.8992
0.9529
530
472
424
383
347
316
289
266
245
226
210
195
182
170
159
149
141
132
125
353
315
283
255
231
211
193
177
163
151
140
130
121
113
106
100
94
88
83
1681
1587
1504
1428
1360
1299
1242
1190
1143
1099
1058
1020
985
952
922
893
866
840
816
RR3TNTALU52
RR3TNTALU44
RR3TNTALU60
RR3TNTALU70
RR3TNTALU40
RR3TNTALU56
RR3TNTALU48
RR3TNTALU64
RR3TNTALU38
RR3TNTALU54
RR3TNTALU46
RR3TNTALU62
RR3TNTALU72
RR3TNTALU42
RR3TNTALU58
RR3TNTALU68
RR3TNTALU50
RR3TNTALU66
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
TENTEDTM ANGLE ROCKET RACK®
TentedTM 6061-T6 Aluminum 3x3x1/4
0.2810
0.3150
0.3510
0.3889
0.4288
0.4706
0.5144
0.5601
0.6077
0.6573
0.7089
0.7623
0.8178
0.8751
0.9344
0.9957
1.0589
1.1241
1.1912
847
756
678
612
555
506
463
425
392
362
336
312
291
272
255
239
225
212
200
565
504
452
408
370
337
309
283
261
241
224
208
194
181
170
159
150
141
133
OVERALL LENGTH
1" 9
16 "
SLOT LENGTH
2" .394"
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Patented: Drawn by:
ROCKET RACK® Standard
D608,183S & D599,194S MM MM/RM 2-2018
STD.
SLOT LENGTH SLOT LENGTH SLOT LENGTH
ROCKET RACK® STANDARDU.S. PATENT NOS. D608,183 S & D599,194 S
• These slots and mounting holes are centered on horizontal flat leg of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load ratings are based on ASD, 9TH Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
LOAD RATINGS ARE LISTED FOR TWO MATERIALS HAVING THE FOLLOWING PROPERTIES:
Material
304/316 Stainless Steel
6061-T6 Aluminum
Yield Stress (KSI)
30
37
Mod of Elasticity (KSI)
28100
10000
4 SLOT STANDARD
1 SLOT STANDARD OVERALL LENGTH
916 ".394"
SLOT LENGTH
2"
1"
Drawing Number:
Drawing Title:
A A
B B
2
2
1
1
Date:Material:
ROCKET RACK® 866-481-8899
Unique Metal Solutions, LLCPO Box 133
Gray Summit, MO 63039rocket-rack.com
Aprvd by:Patented: Drawn by:
ROCKET RACK® Standard
D608,183S & D599,194S MM MM/RM 2-2018
STD.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
21
• These slots and mounting holes are centered on horizontal flat leg of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
• These slots and mounting holes are centered on horizontal flat leg of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load ratings are based on ASD, 9TH Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
22
ROCKET RACK® STANDARDU.S. PATENT NOS. D608,183 S & D599,194 S
PART NUMBEROverall
RRSTD30412 | RRSTD31612 12"
14"
16"
18"
20"
22"
24"
26"
28"
30"
32"
34"
36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
1507
1256
1076
942
837
753
685
628
580
538
457
380
443
419
397
377
359
342
328
314
301
290
279
269
260
0.0045
0.0065
0.0088
0.0115
0.0146
0.0180
0.0218
0.0260
0.0305
0.0354
0.0370
0.0373
0.0521
0.0584
0.0651
0.0722
0.0796
0.0873
0.0954
0.1039
0.1127
0.1219
0.1315
0.1414
0.1517
1507
1256
1076
942
837
753
685
628
580
538
457
380
443
419
397
377
359
342
328
314
301
290
279
269
260
1507
1256
1076
942
837
753
685
628
580
538
457
380
443
419
397
377
359
342
328
314
301
290
279
269
260
3014
2511
2153
1883
1674
1507
1370
1256
1159
1076
915
760
886
837
793
753
718
685
655
628
603
580
558
538
520
0.0056
0.0081
0.0110
0.0144
0.0183
0.0225
0.0273
0.0325
0.0381
0.0442
0.0462
0.0466
0.0652
0.0731
0.0814
0.0902
0.0994
0.1091
0.1193
0.1299
0.1409
0.1524
0.1644
0.1768
0.1896
3014
2511
2153
1883
1674
1507
1370
1256
1159
1076
915
760
886
837
793
753
718
685
655
628
603
580
558
538
520
3014
2511
2153
1883
1674
1507
1370
1256
1159
1076
915
760
886
837
793
753
718
685
655
628
594
549
509
473
441
RRSTD30428 | RRSTD31628
RRSTD30420 | RRSTD31620
RRSTD30436 | RRSTD31636
RRSTD30446 | RRSTD31646
RRSTD30416 | RRSTD31616
RRSTD30432 | RRSTD31632
RRSTD30424 | RRSTD31624
RRSTD30440 | RRSTD31640
RRSTD30450 | RRSTD31650
RRSTD30456 | RRSTD31656
RRSTD30414 | RRSTD31614
RRSTD30430 | RRSTD31630
RRSTD30422 | RRSTD31622
RRSTD30438 | RRSTD31638
RRSTD30448 | RRSTD31648
RRSTD30454 | RRSTD31654
RRSTD30418 | RRSTD31618
RRSTD30434 | RRSTD31634
RRSTD30444 | RRSTD31644
RRSTD30426 | RRSTD31626
RRSTD30442 | RRSTD31642
RRSTD30452 | RRSTD31652
RRSTD30458 | RRSTD31658
RRSTD30460 | RRSTD31660
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
ROCKET RACK® STANDARD
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
0.633 0.6260.248 0.209
Standard 304 & 316 Stainless 2x2x1/4
• These slots and mounting holes are centered on horizontal flat leg of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
23
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
0.633 0.6260.248 0.209
PART NUMBEROverall
RRSTDALU12 12"
14"
16"
18"
20"
22"
24"
26"
28"
30"
32"
34"
36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
1858
1549
1327
1161
1032
929
845
774
698
575
465
380
547
516
489
465
442
422
404
387
363
330
344
332
320
0.0156
0.0225
0.0306
0.0400
0.0506
0.0625
0.0756
0.0900
0.1032
0.1061
0.1057
0.1047
0.1807
0.2026
0.2257
0.2501
0.2757
0.3026
0.3307
0.3601
0.3815
0.3898
0.4558
0.4901
0.5258
1858
1549
1327
1161
1032
929
845
774
698
575
465
380
429
382
343
310
281
256
234
215
198
183
170
158
147
1858
1549
1327
1161
1019
826
682
573
489
421
367
323
286
255
229
206
187
171
156
143
132
122
113
105
98
3717
3097
2655
2323
2065
1858
1689
1549
1396
1150
931
760
1093
1032
978
929
885
845
808
774
726
659
688
664
641
0.0195
0.0281
0.0383
0.0500
0.0633
0.0781
0.0946
0.1125
0.1289
0.1327
0.1321
0.1309
0.2258
0.2532
0.2821
0.3126
0.3446
0.3782
0.4134
0.4501
0.4769
0.4873
0.5697
0.6127
0.6572
3717
3097
2655
2323
2065
1858
1638
1376
1173
1011
881
760
686
612
549
495
449
409
375
344
317
293
272
253
236
3717
3097
2655
2064
1631
1321
1092
917
782
674
587
516
457
408
366
330
300
273
250
229
211
195
181
169
157
RRSTDALU28
RRSTDALU20
RRSTDALU36
RRSTDALU46
RRSTDALU16
RRSTDALU32
RRSTDALU24
RRSTDALU40
RRSTDALU50
RRSTDALU56
RRSTDALU14
RRSTDALU30
RRSTDALU22
RRSTDALU38
RRSTDALU48
RRSTDALU54
RRSTDALU18
RRSTDALU34
RRSTDALU44
RRSTDALU26
RRSTDALU42
RRSTDALU52
RRSTDALU58
RRSTDALU60
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
ROCKET RACK® STANDARDStandard 6061-T6 Aluminum 2x2x1/4
ROCKET RACK® STANDARDU.S. PATENT NOS. D608,183 S & D599,194 S
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
24
• These slots and mounting holes are centered on horizontal flat leg of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
ROCKET RACK® STANDARDU.S. PATENT NOS. D608,183 S & D599,194 S
PART NUMBEROverall
RR3STD30436 | RR3STD31636 36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
62"
64"
66"
68"
70"
72"
1060
1001
948
901
858
819
783
751
721
693
667
643
621
600
581
563
546
530
515
2119
2002
1896
1801
1716
1638
1566
1501
1441
1386
1334
1287
1242
1201
1162
1126
1092
1060
1029
0.0417
0.0467
0.0520
0.0577
0.0636
0.0698
0.0762
0.0830
0.0901
0.0974
0.1051
0.1130
0.1212
0.1297
0.1385
0.1476
0.1570
0.1666
0.1766
2119
2002
1896
1801
1716
1638
1566
1501
1441
1386
1334
1287
1242
1201
1162
1126
1092
1060
1029
2119
2002
1896
1801
1716
1638
1566
1501
1441
1386
1334
1287
1242
1201
1162
1126
1092
1060
1029
RR3STD30452 | RR3STD31652
RR3STD30444 | RR3STD31644
RR3STD30460 | RR3STD31660
RR3STD30470 | RR3STD31670
RR3STD30440 | RR3STD31640
RR3STD30456 | RR3STD31656
RR3STD30448 | RR3STD31648
RR3STD30464 | RR3STD31664
RR3STD30438 | RR3STD31638
RR3STD30454 | RR3STD31654
RR3STD30446 | RR3STD31646
RR3STD30462 | RR3STD31662
RR3STD30472 | RR3STD31672
RR3STD30442 | RR3STD31642
RR3STD30458 | RR3STD31658
RR3STD30468 | RR3STD31668
RR3STD30450 | RR3STD31650
RR3STD30466 | RR3STD31666
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
ROCKET RACK® STANDARD
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
1.008 0.6260.927 0.500
Standard 304 & 316 Stainless 3x3x1/4
0.0333
0.0374
0.0416
0.0461
0.0509
0.0558
0.0610
0.0664
0.0721
0.0779
0.0841
0.0904
0.0970
0.1038
0.1108
0.1181
0.1256
0.1333
0.1413
1060
1001
948
901
858
819
783
751
721
693
667
643
621
600
581
563
546
530
515
1060
1001
948
901
858
819
783
751
721
693
667
643
621
600
581
563
546
530
515
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
25
• These slots and mounting holes are centered on horizontal flat leg of the angle.
• Loads on these tables are based on utilizing the outside mounting holes.
• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.
• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222
SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING
Area Min. Section Mod. Moment of Inertia Radius of Gyration
(lbs.) (in.)(in.^4) (in.^3)
1.008 0.9590.927 0.5
ROCKET RACK® STANDARDU.S. PATENT NOS. D608,183 S & D599,194 S
PART NUMBEROverall
RR3STDALU36 36"
38"
40"
42"
44"
46"
48"
50"
52"
54"
56"
58"
60"
62"
64"
66"
68"
70"
72"
1307
1234
1169
1111
1058
1010
966
926
889
854
823
793
766
741
717
694
673
653
635
2614
2469
2339
2222
2116
2020
1932
1851
1777
1709
1646
1587
1532
1481
1433
1389
1346
1307
1270
0.1444
0.1618
0.1803
0.1998
0.2203
0.2418
0.2643
0.2877
0.3122
0.3377
0.3642
0.3916
0.4201
0.4496
0.4800
0.5115
0.5440
0.5775
0.6119
2565
2288
2053
1853
1681
1532
1401
1287
1186
1097
1017
945
881
824
771
724
681
641
605
1710
1525
1369
1235
1121
1021
934
858
791
731
678
630
588
549
514
483
454
427
403
RR3STDALU52
RR3STDALU44
RR3STDALU60
RR3STDALU70
RR3STDALU40
RR3STDALU56
RR3STDALU48
RR3STDALU64
RR3STDALU38
RR3STDALU54
RR3STDALU46
RR3STDALU62
RR3STDALU72
RR3STDALU42
RR3STDALU58
RR3STDALU68
RR3STDALU50
RR3STDALU66
Length
Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360
Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)
ROCKET RACK® STANDARD
0.1155
0.1295
0.1443
0.1598
0.1762
0.1934
0.2114
0.2302
0.2498
0.2701
0.2913
0.3133
0.3361
0.3597
0.3840
0.4092
0.4352
0.4620
0.4895
1307
1234
1169
1111
1051
957
876
804
741
685
636
591
551
515
482
452
425
401
378
1069
953
856
772
700
638
584
536
494
457
424
394
367
343
321
302
284
267
252
Standard 6061-T6 Aluminum 3x3x1/4
INFORMATION & DETAILS
ASK US ABOUT OUR LUNCH & LEARN PROGRAM
Thank you for your interest in the patented ROCKET RACK® Sanitary Support System for Electrical and Mechanical Installations.
Most items listed in this catalog are factory stock items to ensure quick order turnaround and product shipment to meet tight job time-line requirements.
For details on slot length & placement please call us at 903.680.4222.TO PLACE AN ORDER CALL 903.680.4222 OR SEND TO [email protected]
Since the invention of ROCKET RACK® by founder, Ron Meyer, ROCKET RACK continues to develop new and innovative products for our customers, always striving to make the contractor’s work easier, with faster and safer installations. Our design team is happy to assist with a unique and sanitary mounting solution for your next food-grade project. Just let us know what type of conduit or process piping you’ll be installing or the dimensions of any equipment you need to mount, and the size of the space you’ll be working in. We’ll be happy to support design efforts of your project! Our team has many years’ experience working in industrial facilities.
“ My customers really love the sleek design of ROCKET RACK® products. The racks have a nice simple, clean look and can be used in a variety of applications. No matter the project, the end result is a very sharp-looking installation.” - Electrical Contractor (Foreman), Missouri
“ We installed ROCKET RACK® supports for a recent plant upgrade. It was a quick and efficient installation. We’d previously had to custom make each support stand, and they don’t compare to your stands. We’re very pleased with the ROCKET RACK® product.” - Engineer, Pennsylvania
Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.
ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.
903.680.4222 [email protected]
26
INNOVATION & DESIGNROCKET RACK® continues to develop new and innovative products. We're always striving to make
the contractor’s job easier, with faster and safer installations. Call and tell us about your next project,
and our design team can create a ROCKET RACK® solution for you.
" The unique & simple design of the ROCKET RACK® is perfect for my customer’s facilities. It creates such a beautiful installation. Fast and clean, too. Their customer service is outstanding – Ron and his team are very helpful when I need a one-of-a-kind rack. I just tell him the type of equipment we’re installing & the dimensions, and he comes up with the perfect mounting solution. Great products. Great company.”
- Engineer/Project Manager, Missouri
903.680.4222 [email protected]