catalogue (1)

Dear Electronics Enthusiast 1 April 2006

The products that are advertised in this new catalogue can bepurchased at our shop. You are invited to visit our shopand see the products firsthand, however for your convenienceall the products may also be ordered from our website.Electronics123 is a well-established company providing aservice to thousands of electronic hobbyists, students andprofessionals throughout South Africa.

Best regards,Jaco Smit.

Manager:Jaco Smit

Editor:Cornelius

Mail Orders:Hilda

Administration:Vicky

Store:Lucas

Sales:AnaniasJoshuaNormanWelcome

Shop1 Moulton Centre, Cnr. of Codonia & Moulton Street, Waverley, Pretoria, South AfricaPO Box 31113 Waverley Pretoria 0135, Tel: (012) 332 2356, Fax: (012) 332 0487E-mail: [email protected], Internet: http://www.electronics123.co.za

Members: JJ Smit/ JH Smit/ J Smit

ELECTRONICS123

Archimedes Products cc t/a

Going online:www.electronics123.co.za

Our website makes online shoppingas easy as 123

Step 1: Use the Catalogue for product codes.Step 2: Know immediately if we have stock.Step 3: Get the exact price of the product.

TECHNOLOGY STATION IN ELECTRONICS

ElectronicAssembly Facility

Introduction

Situated at the Tshwane University of Technology(TUT), the Technology Station in Electronics(TSE) aims to assist SMEs to become globalcompetitors through:

Automated Electronic AssemblyRapid PrototypingPrototype Rework

Contacts

Dr SJ Jacobs(Director)Mr Kobus Vorster (Facility Co-ordinater)Tel: (012) 318-5039Fax: (012) 318-4166E-mail: [email protected]@tsem.co.za

9

INDEX

BOOKS & MAGAZINESMAGAZINES..................................................................01.1

HI-FI AND AUDIO.......................................................... 01.4

COMPUTERS................................................................ 01.4

MICROCONTROLLERS................................................ 01.4

DATA, THEORY AND REFERENCE............................. 01.5

GENERAL CIRCUITS AND PROJECTS.......................01.8

SERVICING MANUAL................................................... 01.9

KITS & MODULESROBOTICS AND MECHANICAL MOTION................... 02.1

BATTERY CHARGERS AND ACCESSORIES............. 02.5

POWER SUPPLIES....................................................... 02.6

INVERTERS AND CONVERTERS................................ 02.9

CIRCUIT PROTECTION................................................ 02.10

SIGNAL GENERATORS................................................02.11

SOUND IMITATIONS..................................................... 02.12

VARIOUS SOUNDS.......................................................02.13

AUDIO AMPLIFIERS..................................................... 02.16

AUDIO SIGNAL MODIFIERS........................................ 02.27

LIGHT EFFECTS........................................................... 02.29

FLASHERS.................................................................... 02.31

RUNNING LIGHTS........................................................ 02.33

SOUND TO LIGHT MODULATORS.............................. 02.37

AUDIO SIGNAL LEVEL INDICATORS......................... 02.39

DISPLAYS......................................................................02.40

GAMES AND FUN STUFF.............................................02.45

SPY STUFF.................................................................... 02.48

TELEPHONE ACCESSORIES...................................... 02.48

INTERCOMS..................................................................02.49

RECORDING DEVICES.................................................02.49

HEALTH, SAFETY AND ENVIRONMENT.....................02.50

CAR ACCESSORIES.....................................................02.52

COMPUTER ACCESSORIES........................................02.54

MICRO CONTROLLER PROGRAMMERS................... 02.58

REMOTE CONTROLLERS............................................02.60

RELAY UNITS AND SWITCHES...................................02.63

FLUID LEVEL SENSORS..............................................02.66

TEMPERATURE SWITCHES........................................ 02.66

SOUND SWITCHES...................................................... 02.68

LIGHT SENSITIVE SWITCHES.....................................02.69

TOUCH SWITCHES.......................................................02.70

LIGHT DIMMERS...........................................................02.70

MOTOR SPEED CONTROLLERS................................ 02.71

RADIO TRANSMITTERS...............................................02.73

RADIO RECEIVERS...................................................... 02.74

TV AND VIDEO..............................................................02.76

SECURITY......................................................................02.77ALARM SIMULATORS AND DETERRENTS

ELECTRONIC KEY AND KEY-PAD SWITCHES.......... 02.77

ALARM CONTROL PANELS........................................ 02.78

LIGHT BARRIERS.........................................................02.79

TIMERS..........................................................................02.80

TESTING INSTRUMENTS AND DEVICES................... 02.84

MISCELLANEOUS KITS............................................... 02.86

EXPERIMENTATION PROJECTSEXPERIMENTATION PROJECTS.................................02.86

NO SOLDERING REQUIRED PROJECTS................... 02.88

SOLDERING FOR STARTERS..................................... 02.89

CONSUMER PRODUCTSCLOCKS........................................................................ 03.1

LIGHT PRODUCTS....................................................... 03.1

AUDIO PRODUCTS.......................................................03.2

TOYS..............................................................................03.2

HOME AND GARDEN................................................... 03.3

CAR AND MOTORCYCLE............................................ 03.3

SECURITYVIDEO CAMERA MODULES........................................ 04.1

FAKE SECURITY CAMERAS....................................... 04.2

HOME AND BUSINESS SECURITY SYSTEMS...........04.2

CAR / MOTOR CYCLE SECURITY SYSTEMS............ 04.3

SWITCHES AND LOCKS.............................................. 04.5

SIRENS AND WARNING LIGHTS.................................04.5

SECURITY SENSORS...................................................04.7

REMOTE CONTROLS...................................................04.9

SECURITY COMMUNICATORS....................................04.11

TOOLSTEST AND MEASUREMENTOSCILLOSCOPES........................................................ 05.1

SIGNAL GENERATORS................................................05.3

MULTIMETERS..............................................................05.4

PANEL MOUNT DISPLAYS...........................................05.6

TESTING DEVICES....................................................... 05.7

TOOLSANTI-STATIC PROTECTION.........................................05.8

IC HANDLING................................................................ 05.8

ASSISTING TOOLS.......................................................05.8

TWEEZERS................................................................... 05.9

PLIERS AND CUTTERS................................................05.9

WIRE STRIPPERS.........................................................05.10

CRIMPING TOOLS........................................................ 05.10

SCREWDRIVERS.......................................................... 05.11

TOOL KITS.................................................................... 05.11

PCB DRILLING TOOLS................................................ 05.12

DRILL BITS....................................................................05.13

MILLING BITS............................................................... 05.13

CUTTING DISCS........................................................... 05.13

GRINDING BITS............................................................ 05.14

SURFACE FINISHING BITS..........................................05.14

SOLDERING IRONS......................................................05.15

SOLDERING IRON REPLACEMENT TIPS.................. 05.16

SOLDERING STANDS.................................................. 05.17

TOOLS FOR DESOLDERING....................................... 05.17AND SOLDER REMOVAL

SOLDER WIRE.............................................................. 05.17

CIRCUIT PROTOTYPINGBREADBOARDS........................................................... 05.18

JUMPER WIRES............................................................05.18

STRIPBOARD / VEROBOARD..................................... 05.19

PRINTED CIRCUIT BOARD (PCB)...............................05.19

PCB ACCESSORIES.....................................................05.20

SOFTWAREELEKTOR CD-ROMS.................................................... 05.20

EDUCATIONAL CD-ROMS........................................... 05.22

EAGLE PCB DESIGN SOFTWARE.............................. 05.23

POWER SUPPLIES AND INVERTERSRECTIFYING POWER SUPPLIES................................ 05.23

PLUG IN UNREGULATED AC TO DC ADAPTORS.....05.24

FIXED VOLTAGE...........................................................05.24REGULATED POWER SUPPLIES

VARIABLE VOLTAGE................................................... 05.24REGULATED POWER SUPPLIES

INVERTERS...................................................................05.25

VOLTAGE CONVERTERS.............................................05.26

SOLAR PANELS AND ACCESSORIES........................05.27

HARDWAREMISCELLANEOUSADHESIVES...................................................................06.1

TAPE.............................................................................. 06.1

ADHESIVE RUBBER FEET...........................................06.1

GROMMETS.................................................................. 06.1

GEARS AND PULLEYS................................................ 06.1

NUTS AND BOLTSSTEEL............................................................................06.3

DISTANCE BOLTS........................................................ 06.3

SPACERS...................................................................... 06.3

ENCLOSURESSTANDARD PLASTIC ENCLOSURES......................... 06.3

FLANGED PLASTIC ENCLOSURES........................... 06.4

PLASTIC UTILITY / STORAGE ENCLOSURES.......... 06.4

SPECIAL PLASTIC ENCLOSURES............................. 06.4

SIMPLEX METAL ENCLOSURES................................ 06.5

SIMPLEX WITH VISOR METAL ENCLOSURES..........06.5

ALL PURPOSE + VISOR METAL ENCLOSURES....... 06.5

VENTILATED METAL ENCLOSURES..........................06.5

SPECIAL METAL ENCLOSURES.................................06.6

COMPONENTSBATTERIES AND ACCESSORIESLEAD ACID RECHARGEABLE BATTERIES............... 07.1

GENERAL PURPOSE BATTERIES.............................. 07.1

ALKALINE BATTERIES................................................ 07.2

LITHIUM BATTERIES....................................................07.3

NICKEL CADMIUM RECHARGEABLE BATTERIES...07.3

NI-MH RECHARGEABLE BATTERIES........................ 07.3

BATTERY HOLDERS.................................................... 07.4

BATTERY CHARGERS AND ACCESSORIES............. 07.5

LIGHT PRODUCTSXENON STROBE LAMPS.............................................07.5

FLUORESCENT LAMPS...............................................07.6

ULTRAVIOLET BLACKLIGHTS................................... 07.7

NEON LAMPS / INDICATORS...................................... 07.7

SPOTLIGHTS AND COLOURED LAMPS.................... 07.7

FILAMENT LAMPS........................................................07.7

LAMPHOLDERS AND REFLECTORS......................... 07.8

LIGHT EFFECT / DISPLAY DEVICES.......................... 07.9

CABLES AND ACCESSORIESPANEL FLEX................................................................. 07.10

RIPCORD / TWIN FLEX................................................ 07.10

LOUDSPEAKER CABLE.............................................. 07.10

POWER CABLE............................................................ 07.11

SIGNAL / BURGLAR ALARM CABLE......................... 07.11

CATEGORY 5E LAN DATA CABLE..............................07.11

RIBBON CABLE............................................................07.11

SCREENED AUDIO COAXIAL CABLE........................ 07.12

COAXIAL CABLE..........................................................07.12

FIBRE OPTIC CABLE................................................... 07.12

ENAMEL INSULATED COPPER WIRE........................ 07.12

TINNED COPPER WIRE............................................... 07.12

RESISTANCE WIRE...................................................... 07.12

HEAT SHRINK TUBING.................................................07.13

CABLE CLIPS............................................................... 07.13

CABLE TIES.................................................................. 07.13

ADHESIVE MOUNTING BLOCKS................................ 07.13

SPIRAL CABLE WRAPPING........................................ 07.13

EMI FILTER CABLE CLAMPS......................................07.13

CONNECTORS AND SOCKETSIC SOCKETS................................................................. 07.14

AUDIO JACK CONNECTORS...................................... 07.14

RCA PHONO / XLR CONNECTORS............................ 07.15

ADAPTERS AUDIO JACK / XLR / RCA PHONO.........07.16

RJ10, RJ11, RJ12, RJ45 CONNECTORS.................... 07.17

BANANA CONNECTORS............................................. 07.18

DC / AC POWER CONNECTORS.................................07.18

MAINS POWER CONNECTORS...................................07.19

’D’ TYPE AND COMPUTER CONNECTORS............... 07.20

IDC HEADER PLUGS AND SOCKETS........................ 07.22

SINGLE ROW HEADER PLUGS AND SOCKETS....... 07.22

POWER CONNECTOR PLUG / SOCKET SETS..........07.23

SCREWLOCK MULTIPIN CONNECTORS................... 07.23

DIN SOCKETS AND PLUGS.........................................07.23

BNC / TNC / SMA CONNECTORS............................... 07.24

N / PL259 (UHF) TYPE CONNECTORS....................... 07.25

RADIO / TV / SATELLITE CO-AX CONNECTORS...... 07.26

TERMINAL / CONNECTOR TAGS AND....................... 07.27PRESS CONNECTORS

LOUDSPEAKER CONNECTORS................................. 07.28

TERMINAL BLOCKS.....................................................07.29

CROCODILE CLIPS...................................................... 07.29

WIRE CLIPS.................................................................. 07.29

THERMAL MANAGEMENTHEATSINKS................................................................... 07.30

HEATSINK ACCESSORIES.......................................... 07.30

COOLING BRUSHLESS FANS.....................................07.30

PELTIER MODULE........................................................07.31

CIRCUIT PROTECTIONFUSES........................................................................... 07.31

FUSE HOLDERS........................................................... 07.32

PTC RESETTABLE FUSES.......................................... 07.33

THERMAL CUTOFF FUSES......................................... 07.33

THERMAL CIRCUIT BREAKERS................................. 07.33

GAS TUBE ARRESTORS............................................. 07.33

METAL OXIDE VARISTORS (MOV)..............................07.33

TRANSIENT VOLTAGE SUPPRESSOR DIODES........07.34

PASSIVE COMPONENTSINDUCTORS.................................................................. 07.34

CAPACITORS................................................................ 07.35

RESISTORS...................................................................07.39

ANALOGUE COUNTING DIAL MECHANISMS........... 07.45

POTENTIOMETER KNOBS.......................................... 07.45AND KNOB ACCESSORIES

QUARTZ CRYSTALS.................................................... 07.48

CRYSTAL OSCILLATOR MODULES............................07.48

CERAMIC RESONATORS.............................................07.48

SEMICONDUCTORSINTEGRATED CIRCUITS.............................................. 07.48

TRANSISTORS..............................................................07.52

DIODES..........................................................................07.55

LEDs.............................................................................. 07.56

LASER DIODES............................................................ 07.60

OPTO COUPLERS........................................................ 07.60

THYRISTORS................................................................ 07.60

TRIACS.......................................................................... 07.60

SENSORSLIGHT SENSORS.......................................................... 07.60

SOUND SENSORS........................................................07.61

TEMPERATURE SENSORS..........................................07.61

DISPLAYSLCD WITH DRIVER....................................................... 07.62

PLAIN LCD.................................................................... 07.62

RADIO AND TVRF TRANSMITTER / RECEIVER MODULES............... 07.62

TV AMPLIFIERS............................................................ 07.64

ANTENNAS................................................................... 07.64

RELAYSREED RELAYS.............................................................. 07.64

PCB MOUNT RELAYS.................................................. 07.65

PLUG-IN RELAYS......................................................... 07.66

SWITCHESTACTILE / KEYBOARD SWITCHES.............................07.66

KEYPADS...................................................................... 07.67

PUSH-BUTTON SWITCHES......................................... 07.67

MICRO SWITCHES....................................................... 07.68

ROCKER SWITCHES....................................................07.68

TOGGLE SWITCHES.................................................... 07.68

SLIDE SWITCHES.........................................................07.70

ROTARY ENCODERS................................................... 07.70

ROTARY SWITCHES.....................................................07.70

KEY SWITCHES............................................................ 07.70

TILT SWITCHES............................................................ 07.71

TIME SWITCHES...........................................................07.71

REED SWITCHES......................................................... 07.71

PERMANENT MAGNETS..............................................07.71

LOUDSPEAKERS AND SOUNDPIEZO TRANSDUCERS................................................ 07.71

BUZZERS...................................................................... 07.71

HEADPHONES.............................................................. 07.72

MICROPHONES............................................................ 07.73

SPEAKERS....................................................................07.73

SPEAKERS IN ENCLOSURES.....................................07.73

SPEAKER ACCESSORIES...........................................07.74

MOTORSDC PERMANENT MAGNET MOTORS.........................07.74

DC GEARED MOTORS................................................. 07.75

STEPPER MOTORS......................................................07.76

MINI SERVO MOTORS................................................. 07.76

TRANSFORMERSCHASSIS MOUNT TRANSFORMERS..........................07.76

PCB MOUNT TRANSFORMERS.................................. 07.76

PLUG IN TRANSFORMERS......................................... 07.77

TOROIDAL TRANSFORMERS..................................... 07.77

VARIABLE TRANSFORMERS......................................07.77

SPECIAL APPLICATION TRANSFORMERS............... 07.77

TRANSFORMER AND FERRITE CORES.................... 07.78

Note: Our range of books cover avast spectrum in electronics andcomputers. For additional cir-cuits and data refer to the com-puter software section of the cat-alogue.We continuously expand ourrange of books. Our policy is tocater for the practical person,thus the books offered are filledwith circuits and projects tobuild. For electronic componentsrequired to build the circuitsdescribed in the books refer tothe Electronic Components sec-tion in this catalogue.

CATALOGUE

ELECTRONICS123 CATALOGUEThe catalogue contains over 5000 differentproducts including:Electronic projects, kits, books, components,wires, soldering tools, test equipment, alarmsystems, batteries, meters, enclosures andmore.(Should you order only the catalogue: thecatalogue with its postage and packaging willcost thirty Rand: R30 VAT is included).

ORDER CODE: XB001

ELECTRONIC MAGAZINES

Note: The following magazineswere in stock at the time of print-ing.

ELEKTORELEKTOR ELECTRONICS

(SEPTEMBER 2004)

In this issue:New Product Trends in MicrocontrollersVersatile: Basic, 8051, RS232, USB projectStep-by-step Construction: Rolling DiceBluetooth Remote using PDA / mobile phoneUSB Embedded Host Controller

ORDER CODE: AB387

ELEKTOR ELECTRONICS(OCTOBER 2004)

In this issue:Review on 22 OscilloscopesLabView: program for electronics engineersProfilab-Expert: PC acquisition card softwarePoor man’s 1GHz input buffer probeSlave Flash for Digital CamerasFour in a Row: electronic game project

ORDER CODE: AB391

ELEKTOR ELECTRONICS(DECEMBER 2004)

In this issue:Home automation using digital bus systemsUSB / I2C and SMBusI2C-homebus under PC controlCollection of circuits and component ideasIR Remote ControlKitchen table: LED Christmas Tree

ORDER CODE: AB715

ELEKTOR ELECTRONICS(JANUARY 2005)

In this issue:31 Power Supplies on the market comparedTheory: Cuk Switched-Mode Power SupplyBuild a Cuk SMPSUPIC18Flash Development Board

ATX Power Supply Tester checks voltagesDelphi for Electronic Engineers (1)

ORDER CODE: AB747

ELEKTOR ELECTRONICS(FEBRUARY 2005)

In this issue:Wireless Connectivity: WLAN, Bluetooth, etc.Build the following:13.56MHz RFID DetectorWireless MicrophoneVHF FM Antenna BoosterButterfy Dipole Indoor Antenna for DVB-TDelphi for Electronic Engineers (2)

ORDER CODE: AB993

ELEKTOR ELECTRONICS(MARCH 2005)

In this issue:Anti-noise SystemsOpinions on Valves versus Transistors2 x 40W High-end Power AmplifierEL156 Valve Audio Power AmplifierSolitaire Game using an ATMEL AT90S2313Serially Programmable Crystal OscillatorDelphi for Electronic Engineers (3)

ORDER CODE: AC581

ELEKTOR ELECTRONICS(APRIL 2005)

01.1

BOOKS & MAGAZINES

In this issue:Microcontroller Comparison Guide32-bit ARM micro. Development SystemSC-Analyser 2005: Semiconductor TesterSuper Lithium Batteries: new developmentsLithium-polymer bat. charger for 2 or 3 cellsNew Road Toll Systems: auto toll collectionDelphi for Electronic Engineers (4)

ORDER CODE: AC357

ELEKTOR ELECTRONICS(MAY 2005)

In this issue:PetInspect: wearable computer for petsUniversal DCC Programmer Model TrainsMagnetic Flux Density Tester5.1 Surround Switch Box: simply useful!Description of Automotive SensorsGlow Plug Heater for RC model enginesDelphi for Electronic Engineers (5)

ORDER CODE: AC601

ELEKTOR ELECTRONICS(SEPTEMBER 2005)

In this issue:Modifying the Microsoft XboxTesting popular USB PC-OscilloscopesDelphi for Electronic Engineers (7)Build the following:ESR / Capacitance MeterUltrasonic Distance / Liquid-level MeterPrecision Barometer / AltimeterOptical Racetrack Timer using PC software

ORDER CODE: AC843

ELEKTOR ELECTRONICS(OCTOBER 2005)

In this issue:Biometrical Imaging overviewFingerprint-based authentication explainedPC Data authentication and CryptographyFlash Lock for PCs instead of passwordTexas Instruments TIRIS RFIDs and ReaderDelphi for Electronic Engineers (8)

ORDER CODE: AC904

ELEKTOR ELECTRONICS(DECEMBER 2005)

In this issue:Electronic Warefare using invisible HPM8-Channel A/D Converter via USBTelephone Supervisor: logs calls on PCGreat ideas for Christmas giftsPC-controlled colourful Light StringsRemote Switching with mini R/C toy’s circuitsDelphi for Electronic Engineers (10)

ORDER CODE: AD010

ELEKTOR ELECTRONICS(JANUARY 2006)

In this issue:SMD Reflow Soldering OvenReverse engineering pulse-dial telephonesEnvironment: Battle against Electronic WasteBuild 95-Watt 19V 5A laptop PSU for the carBuild accurate camera shutter time meterBuild timer switch for your washing machine

ORDER CODE: AD267

ELEKTOR ELECTRONICS(MARCH 2006)

In this issue:Versatile FPGA Module with the schematicCheap Logger using a web routerTravel Charger: use solar cell, Li-ion chargerTge Good Old 6502 8-bit processor in useAvailable Electronic Development KitsTheory on Linear Motors and ApplicationsApplication Board for R8C/13 microcontroller

ORDER CODE: AD268

ELEKTOR ELECTRONICS(APRIL 2006)

In this issue:Electrical Safety in circuits versus priceRechargeable AA cell characteristics testerPower halogen lamps with PC power supplyUsing the R8C/13 hardware control functionsSPI Box quicker microcontroller programmer

ORDER CODE: AD269

NUTS & VOLTSNUTS AND VOLTS

(MARCH 2005)

In this issue:Analogue-to-Digital Flash ConversionBuild a Geiger Counter (part 1)Roulette / Dice ProjectHDTV: the past, present and its futureGetting Started with PLCs (part 2)PID controller theory (part 3)

01.2

ORDER CODE: AB988

NUTS AND VOLTS(MAY 2005)

In this issue:SupercomputersStrobe Light photograhy for fast picturesThermal chamber: do tests below 0 degreesPerforming Integer Square RootsVideo Text Over Video using a PIC (part 2)

ORDER CODE: AC579

NUTS AND VOLTS(JULY 2005)

In this issue:PIC-based Motorcycle Gear IndicatorBattery Analyzer for RC Power using a PCThe Ultimate Utility Meter (part 1)BLOG your new home on the internet awaitsConstruction of a BalloonSat for near spaceField Effect Transistors (FET) Basics

ORDER CODE: AC807

NUTS AND VOLTS(AUGUST 2005)

In this issue:Deter Bluetooth Phracking (phone hacking)PIC-Based Inductor / frequency MeterMidi-nator: the USB to MIDI interfaceThe Ultimate Utility Meter (part 2)SDR and Cognitive radio that thinks

ORDER CODE: AC905

NUTS AND VOLTS(SEPTEMBER 2005)

In this issue:Description of the Capacitor Family TreeBuild a pool timerTwo simple methods of D/A conversionThe Space Elevator (SE)

ORDER CODE: AC906

NUTS AND VOLTS(OCTOBER 2005)

In this issue:Basic Stamp Project: Candle with LED flameThe Heil Air Motion Transformer (AMT)Wireless Mesh Networks with multiple nodesBuild a Basic MP3 Player Platform (part 1)

ORDER CODE: AC950

NUTS AND VOLTS(NOVEMBER 2005)

In this issue:Human / PC interface using XHTML + voiceSmall DC motor PWM Speed ControlThe ZILOG Z8Encore! XP microcontrollerAn introduction to Analogue FiltersBuild a Basic MP3 Player Platform (part 2)

ORDER CODE: AD001

NUTS AND VOLTS(DECEMBER 2005)

In this issue:The fying Marbellos SculptureThe Poor Man’s CNC Milling MachineUsing the 4007UB CMOS digital ICDIY Ethernet/frame thrower using ENC28J60Internet End-to-End Digital Telephony

ORDER CODE: AD115

NUTS AND VOLTS(JANUARY 2006)

In this issue:CanadArm: the robotic arm like in spaceTheory on Analogue Music SynthesizersAuxiliary radio control channel for RC toysbuild the Perceptron circuit like one neuronGetting Started with PIC Microcontrollers

ORDER CODE: AD266

NUTS AND VOLTS(FEBRUARY 2006)

In this issue:Build a high speed photo flash triggerMagnetic Amplifier Technology of the 1950sOverview: short-range wireless technologiesMicrochip PIC-based resistor checkerUse the LM399 to measure tiny air currents

ORDER CODE: AD248

01.3

HI-FI AND AUDIO

BUILD YOUR OWN HIGH-END AUDIOEQUIPMENT

GB543

In the 1990s, top-of-the-range hi-fi apparatusbecame known as high-end equipment, andthe name is a good indication of the pricescharged for it. For those who cannot, or willnot, pay these high prices, there is a solutionoffered in this book: build your own at con-siderable cost savings. This book is aimednot only at this sector of the market, but alsoat the many enthusiasts who want to be ableto experiment and to make their own modifi-cations to their high-end equipment.Contents include solid-state and valve pre-amplifiers and power amplifiers, activecrossover filters, an active subwoofer, aheadphone amplifier and more. 262 Pages,size 17 x 23.5cm, softcover.

ORDER CODE: GB543

DESIGNING AUDIO CIRCUITS

GB544

How does speech, music, or, indeed, anysound get from the record, the CD, or thecassette tape to the loudspeaker? This is aquestion that many people keep on askingand to which this book endeavours to give acomprehensible answer.Understanding the background of theprocess is a first requirement, which is whythe author in the description of single com-ponents makes clear what exactly happensin the component. An understanding is alsoengendered of phenomena such as noise,hum, distortion, and others, as well as stan-dards such as the decibel and the RIAAcharacteristic.Designing circuits is well nigh impossiblewithout an understanding of the various net-works involved in the conversion of the inputsound to the sound emanating from a loud-speaker. To this end, the author describesfour important basic circuits using an opera-tional amplifier, a component without which

modern audio circuits can no longer beimagined. Variants of these four circuitsreturn in many of the other circuits containedin this book.Building circuits, including ancillary and spe-cial ones, forms the practical parts of thisbook. These circuits can be applied to audioequipment as well as certain musical instru-ments. There are preamplifiers, filters, outputstages, power supplies, compandors, mixerpanels, level meters, bandwidth limiters,headphone amplifiers, and playback stages,as well as tips on construction and faultfind-ing. 350 Pages, size 17 x 23.5 cm, softcover.

ORDER CODE: GB544

HANDBOOK FORSOUND TECHNICIANS

AB745

A sound technician has to be a jack-of-all-trades. The technician requires not only athorough knowledge of recordinf and play-back audio equipment and electro-acoustics,but must also have sufficient practical experi-ence in electronics. Knowledge of music andmusic instruments is also required to be ableto make recordings of a variety of musicinstruments.This book contains basic theory on micro-phones, musical instruments, various typesof amplifiers, loudspeakers, sound effectsequipment, recording techniques, lightingequipment, faultfinding and small repairs. Italso contains a useful description of termsthat are used in sound engineering and a listof adjectives that are used to describe soundcolouring. Written by F.P. Zantis, 318 Pages,size 17 x 23.5 cm, softcover.

ORDER CODE: AB745

COMPUTERS

PC INTERFACES UNDER WINDOWS

GB545

PC Interfaces can be used for more than justthe printer, mouse, modem and joystick!Although It was relatively easy to directly

access PC interfaces using a DOS comput-er, under Windows things are not all thatsimple. This book shows you how it can bedone.The construction and operation of programsand circuits for the following applications areextensively described:Control CircuitsMeasurement Equipment using the

sound card and video capture cardAnalogue / digital ConvertersEPROM ProgrammerStorage OscilloscopeI2C ApplicationsAsynchronous serial data transmissionand many moreIn addition to exact, practically orienteddescriptions of the traditional PC interfaces(what can they do and how they areaddressed via software), the authorsdescribe the DIY construction and program-ming of a number of highly interesting cir-cuits, all of which can be connected to thePC ports. It is not necessary to open up thePC for any of these projects.The applications described in this book arebased on 32-bit operating systems (Windows95/98). The preferred programming lan-guages are Visual Basic and Delphi.The CD-ROM contains all the example pro-grams in VB5, Delphi 3 or Delphi 4, with allsource files in executable form. PORT.DLL isalso included. In addition, there are two com-plete application programs on the CD-ROM:COMPUNI.EXE - a universal interface appli-cation programSSCAN.EXE - a complete oscilloscope appli-cation for the sound card.Burkhard Kainka, Hans-Joachim Berndt265 Pages, size 17 x 23,5 cm

ORDER CODE: GB545

MICROCONTROLLERS

EASY STEP'N VERSION 1.0

GB404

“Easy Step'n, An Introduction to StepperMotors for the Experimenter,” explains tothe reader how to determine surplus motorelectrical and mechanical specs by usingeasy-to-build electrical and mechanical testequipment. The experimenter will learn todesign and build microcontroller based con-trol systems and to design and build drivercircuits to switch power applied to steppermotor windings. The book is hands-on andfull of experiments. The format of the booksuses flow charts and many code examples ina step-by-step approach. By David Benson,200 pgs, 218 x 278mm.

ORDER CODE: GB404

01.4

EASY MICROCONTROL’N VERSION4.0

GB403

“Easy Microcontrol'n” is intended to ease thebeginner toward understanding and applica-tion of the PIC line of microcontrollers fromMicrochip Technology, Inc. This book is thesame as Easy PIC'n. Examples of assemblylanguage programs range from a simple oneto turn on LED's to more complex ones fortiming and for event-counting. Writing pro-grams is covered in-depth and the use offlow charts, as an aid to visualizing what aprogram does, is emphasized. The approachis hands-on with many examples, all ofwhich may be demonstrated using a verysimple demo board (a project) in the begin-ning of the book. By David Benson, 178pages, 218 x 278mm.

ORDER CODE: GB403

MICROCONTROL’N APPLICATIONSVERSION 2.0

GB369

“Microcontrol'n Apps” is an intermediate levelapplications guide covering MicrochipTechnology's PIC Microcontrollers. Thisbook is an improved “PIC'n Up ThePace”. Serial communication as a means oftransferring data between PIC microcon-trollers and peripheral chips and alsobetween two or more PIC microcontrollers isdescribed. Use of the 93C46 serial EEP-ROM is detailed as an example. Since welive in an analog world, A/D and D/A are dis-cussed with several methods illustrated foreach. Conditioning signals from sensors withan analog voltage output is described.Interfacing PIC microcontroller-controlledsystems with humans requires some math,binary to decimal conversion and vice versa,alphanumeric LCD interfacing and scanningkeypads. Single wire serial communicationwith a PIC-controlled LCD module which canbe built by the reader is included. A digitalthermometer project brings these topicstogether as an example. The book alsoexplains how to establish serial communica-

tion between a PIC microcontroller and a PCvia a RS-232 conversion circuit and a termi-nal program. These techniques are used in adigital voltmeter/data logger experiment foruploading data to a PC for display plusgraphing using a spreadsheet program.Moving up or down from the now familiarPIC16F84 to other devices is covered indetail so that you will easily be able to workwith the new devices being introduced byMicrochip. Finally, use of the Microchip in-cir-cuit debugger (ICD) is described."Microcontrol'n Apps" gives the reader thetools to design, build, and debug intermedi-ate level microcontroller-based instrumenta-tion and systems. By David Benson, 437pages, 218 x 278mm.

ORDER CODE: GB369

TIME’N AND COUNT’N VERSION 1.0

GB370

“Time'n and Count'n” is an intermediate levelbook on 16-bit timing and counting applica-tions using Microchip Technology's PICmicrocontrollers. Customers who havePIC'n Techniques should not buy thisbook. More opportunities for creating funprojects are described. Learning to use timer1 (TMR1) with it's powerful capture, compareand pulse width modulation (PWM) modeswill expand your PIC microcontroller designcapabilities significantly. TMR1, which is anon-board feature of many of the mid-rangePIC microcontrollers, is a 16-bit timer/count-er. The maximum count is 65,535 vs. 255 fortimer 0 (TMR0). This is a big help! TMR1used in conjunction with the capture, com-pare, PWM (CCP) module may be pro-grammed to do useful things unattendedleaving the PIC free to perform other tasks.A special pin may be used for external inputsto TMR1 and another special pin may beused as an external output from TMR1. Thetechniques presented in the book are usefulfor generating single time intervals and freerunning outputs as well as for measuringperiod and frequency. PWM using TMR1unattended is also described. These timingand counting techniques serve as the basisfor designing and building your own periodand frequency generating and measuringtest equipment as described in the book. ByDavid Benson, 218 pages, 218 x 278mm.

ORDER CODE: GB370

SERIAL COMMUNICATIONSVERSION 3.0

GB559

This book introduces serial communications,including asynchronous and synchronouscommunications. This book is the same asSerial PIC'n, but with new information onI2C hardware slave. It shows you how tocommunicate serially with the PICmicro fami-ly of microcontrollers and provides you witha large set of serial communications func-tions and subprograms. These source codemodules make up the PICmicro SerialCommunications Toolbox and implementmost of the serial operations you will needfor your embeded PICmicro applications.Serial Communications is a comprehensiveadvanced level book which details variousmethods for implementing serial communica-tions between a Microchip PIC microcon-troller and an external device. Asynchronousserial communications is covered both byusing an on-chip USART and by bit-bangmethods. The RS-232 standard is explained.A discussion of synchronous serial communi-cations includes the I2C (PhilipsSemiconductors), SPI (Motorola) andMicrowire (National Semiconductor) proto-cols. The Dallas Semiconductor 1-Wire busis described. Many code examples areincluded as modules which will provide thebasis for the reader's own PIC microcon-troller applications. By Roger Stevens, 566pages, 218 x 278mm.

ORDER CODE: GB559

DATA, THEORY AND REFERENCE

APPLIED BASIC ELECTRONICS /TOEGEPASTE BASIESE

ELEKTRONIKA

VB045

The main factor in writing this book is to pro-vide a book which is easy to read, easy tounderstand and has the minimum of mathe-

01.5

matics. The book’s main attempt is to give apractical, no nonsence introduction to thebasic components and circuits found ineveryday electronics. The book is written inboth English and Afrikaans. By DericAspeling

Die hoofoorweging vir die skryf van hierdieboek is om ’n boek daar te stel wat maklik isom te lees, te verstaan en wat ’n minimumwiskunde bevat. Die hoofdoel van die boekis om ’n praktiese, geen nonsens, inleidingte gee tot die basiese komponente enstroombane wat in die allerdaagse elektroni-ka aangetref word. Die boek is in beideAfrikaans en Engels geskryf. Deur DericAspeling.

ORDER CODE: VB045

APPLIED DIGITAL ELECTRONICS /TOEGEPASTE SYFERELEKTRONIKA

VB046

The book approaches the subject of applieddigital electronics in a practical and straight-forward manner, making it an easy teacherfor the hobbyist as well as for the seriousstudent. Mathematics has been kept to theabsolute essentials and should not deterthose readers without any schooling in high-er mathematics. Since the subject is a vastone and impossible to cover comprehensive-ly in a volume of this size. The book concen-trates on those standard digital buildingblocks to be found in any digital circuit. Thebook is written in both English and Afrikaans.By Deric Aspeling.

Die boek benader die onderwerp vantoegepaste syferelektronika op ’n praktieseen eenvoudige manier, wat dit ’n maklike’onderwyser’ maak vir beide die knutselaarasook die ernstige student. Wiskunde isbeperk tot die absoluut-noodsaaklike enbehoort dus nie daardie studente met geenopleiding in gevorderde wiskunde af te skriknie. Aangesien die onderwerp enorm is endit onmoontlik is om volledig te dek in ’n vol-ume van hierdie grote word daar gekonsen-treer op die standaard syferelektronika-boustene wat in enige syferstroombaanaangetref word. Die boek is in beideAfrikaans en Engels geskryf. Deur DericAspeling.

ORDER CODE: VB046

EASY CNCA BEGINNER'S GUIDE TO CNC

“Easy CNC” is a guide for beginners whowant to learn about CNC (computer numeri-cal control) concepts. CNC methods andmachines enables one to duplicate parts withminimum labor and cost. The authors goalwith this book is to present the EASY way ofactually making something with CNC. Theexamples in this book are based on usingsoftware that works and is easy to use.Software is not included. You do not have tobe a computer expert to use this book, butyou need to know the fundamentals.Some of the topics covered are as follows:

using a computerCNC concepts: toolpathCNC software: G-codeCNC machine operation:creating drawings: CAD programsusing a CAM program - DXF to G-code

By David Benson, 200 pages, 214 x 275mm.ORDER CODE: AC844

TECHNIKAELEKTRONIES/ELEKTRIES GR 10

Die boek bevat prakties uitvoerbare elektron-iese en elektriese eksperimente metbykomende vrae. Die teorie wat behandelword is ooreenkomstig die graad 10 skoolsil-labus. Elke eksperiment het meegaandepraktiese en teoretiese invulvrae metvoorgestelde punte toekennings.Gevolgtrekkings bevat invulvrae wat diewerking van kringbane en komponenteopsom. Alle eksperimente is praktiesgetoets. Volledige memorandums is apartbeskikbaar. Saamgestel en geskryf deur C.F.Marais, 96 bladsye, 210 x 297mm.

ORDER CODE: GB364

TECHNIKA ELEKTRONIES/ELEKTRIES GR 11

Die boek bevat prakties uitvoerbare elektron-iese en elektriese eksperimente metbykomende vrae. Die teorie wat behandelword is ooreenkomstig die graad 11 skoolsill-abus. Elke eksperiment het meegaandepraktiese en teoretiese invulvrae metvoorgestelde punte toekennings.Gevolgtrekkings bevat invulvrae wat diewerking van kringbane en komponenteopsom. Alle eksperimente is praktiesgetoets. Volledige memorandums is apartbeskikbaar. Saamgestel en geskryf deur C.F.Marais, 131 bladsye, 210 x 297mm.

ORDER CODE: GB365

MEMORANDUM VIREKSPERIMENTBOEK GR 11

Die boek bevat al die antwoorde op die vraein Eksperimentboek Graad 11 (GB365).Saamgestel en geskryf deur C.F. Marais,145 bladsye, 210 x 297mm.

ORDER CODE: GB367

TECHNIKA ELEKTRONIES/ELEKTRIES GR 12

Die boek bevat prakties uitvoerbare elektron-iese en elektriese eksperimente metbykomende vrae. Die teorie wat behandelword is ooreenkomstig die graad 12 skoolsil-

01.6

labus. Elke eksperiment het meegaandepraktiese en teoretiese invulvrae metvoorgestelde punte toekennings.Gevolgtrekkings bevat invulvrae wat diewerking van kringbane en komponenteopsom. Alle eksperimente is praktiesgetoets. Volledige memorandums is apartbeskikbaar. Saamgestel en geskryf deur C.F.Marais, 162 bladsye, 210 x 297mm.

ORDER CODE: GB366

TECHNICS ELECTRONIC/ELECTRICGR 12

This book is the English translation ofTechnika Elektronies / Elektries Gd 12(GB366). Compiled and written by C.F.Marais, 151 pages, 210 x 297mm.

ORDER CODE: GB554

MEMORANDUM VIREKSPERIMENTBOEK GR 12

Die boek bevat al die antwoorde op die vraein Eksperimentboek Graad 12 (GB366).Saamgestel en geskryf deur C.F. Marais,155 bladsye, 210 x 297mm.

ORDER CODE: GB373

N1 INDUSTRIAL ELECTRONICS

The companion bookfor those embarking ona course in Industrial Electronics N1 at anyTechnical College. The book is crammed

with essential formulae, circuit symbols andheaps of worked examples with detailed cal-culations to ensure success in N1 IndustrialElectronics. This book is also suitable forpersons studying Electrical or Radio and TVtheory, Grade 10 (Std 8) Technicon students,teachers and hobbyists. By Deric Aspeling,66 pgs, 256 x 289mm.

ORDER CODE: AA294

NTE CROSS-REFERENCEDATA BOOK

EB838

NTEs 11th edition of it`s SemiconductorTechnical Guide and Cross Reference. Thebook is designed to give assistance inselecting the NTE component best suited fortheir specific application or circuit. If youhave a device and know the part numberyou may simply turn to the cross-referencesection to locate and appropriate NTEreplacement. You can also the ProductAlphabetical Index to locate products.

ORDER CODE: EB838

TOWERS INTERNATIONALTRANSISTOR SELECTOR

UPDATE 5

EB890

This book has already established itself asthe most user-friendly short-form transistorsubstitution manual. Update 5 offers manynew entries plus a surface mount cross-index. There is enough data for the user tobe able to determine the salient parametersand likely alternatives for the majority of dis-crete bipolar transistors. Over 29 000 tran-sistors listed.

ORDER CODE: EB890

TOWERS INTERNATIONALMOSPOWER AND FET SELECTOR

EB889

The book contains some 9000 devices - highpower, small signal junction and MOSFETS.Similar in format to the companion EB890,this data reference will establish basicparameters and if necessary possible substi-tutes for the majority of discrete Field EffectTransistors.

ORDER CODE: EB889

UP-TO-DATE WORLDSTRANSISTORS, DIODES,

THYRISTORS & ICS VOL. 1

EB876

An excellent reference book. This book listssemiconductor manufacturer codes from A toZ. Over 200 000 comparisons and equiva-lents. Comparison tables of transistors,diodes, thyristors and ICs. Nearly 130 000types with brief data and pin assignment.

ORDER CODE: EB876

UP-TO-DATE WORLDSTRANSISTORS, DIODES,

THRYRISTORS & ICS VOL. 2

This book lists semiconductor manufacturercodes from 1N to 2S, numbers up to60 000 and codes starting with ‘µ’.

It includes comparison tables and brief data

01.7

and pin assignments of different types oftransistors, diodes, thyristors and ICs thatare used daily.Over 200 000 comparisons and equivalentsare given.

ORDER CODE: EB877

GENERAL CIRCUITSAND PROJECTS

302 CIRCUITS

GB542

Like its predecessors in the 300 series ofelectronics projects books, 302 Circuits isaimed at the active electronics enthusiast,professional or amateur. Since the serieswas started in the early 1980s, many thou-sands of readers have found in these booksthat new approach, new concept, or new cir-cuit they were looking for.In 302 Circuits you will find new ideas, newconcepts and new circuits covering thegamut of electronics. The book is arrangedin subject sections to make it easier for youto find the circuit or idea you are looking for.354 Pages, size 14 x 21 cm, softcover

ORDER CODE: GB542

304 CIRCUITS

GB538

Like its predecessors in the 300 series ofelectronics projects books, 304 Circuits isaimed at the active electronics enthusiast,professional or amateur. Since the serieswas started in the early 1980s, many thou-sands of readers have found in these booksthat new approach, new concept, or new cir-cuit they were looking for.In 304 Circuits you will find new ideas, newconcepts and new circuits covering thegamut of electronics. The book is arrangedin subject sections to make it easier for youto find the circuit or idea you are looking for.336 Pages, size 17 x 23,5 cm, softcover

ORDER CODE: GB538

305 CIRCUITS

GB537

Above all, 305 Circuits demonstrates thepractical aspects of electronics through proj-ects that can be built at home, in a smallworkshop, or in the physics or sciencedepartment of schools and colleges.There are projects for everyone, coveringaudio & hi-fi, computers & microcontrollers,music and electrophonics, radio & television,and test & measurement. The projects rangefrom fairly simple circuits for use in the hometo complex ones like communicationsreceivers and computer adjuncts.

ORDER CODE: GB537

307 CIRCUITS

GB536

307 Circuits, the eighth in the 300 series ofcircuit design books, is a compilation ofapplications, projects, circuits and tips origi-nally published in the July/August andDecember issues of Elektor Electronics mag-azine. This book brings the total of publisheddesigns in the 300 series to well over 2,300.Books in the 300 series are popular withengineers, students, teachers, hobbyists andother electronics enthusiasts all over theworld.

ORDER CODE: GB536

308 CIRCUITS

AB188

308 Circuits, the ninth in the 300 series ofcircuit design books, contains a wide rangeof circuits, tips and design ideas. This bookis a compilation of articles originally pub-lished in the Small Circuits Collection sec-tions of the July/August and Decemberissues of Elektor Electronics magazine, yearvolumes 2000, 2001 and 2002.The book has been divided into sections,making it easy to find related subjects in asingle category.308 Circuits not only detailed DIY electroniccircuits for home construction but also inspir-ing ideas for projects you may want todesign from the ground up. Because soft-ware in general and microcontroller program-ming techniques in particular have becomekey aspects of modern electronics, a numberof items in this book deal with these subjectsonly.Like its predecessors in the 300 series, 308Circuits covers the following disciplines andinterest fields of modern electronics: test &measurement, radio and television, powersupplies and battery chargers, general inter-est, computers and microprocessors, circuitideas and audio & hi-fi.368 Pages, Size 17 x 23,5 cm, softcover

ORDER CODE: AB188

THE 555 IC EXPERIMENTER’SCONSTRUCTION KIT

This book explains 23 useful circuits that youcan build. Fun for beginners and a usefulreference for experienced hobbyists. Thebook will teach you about the most commonof all Integrated Circuits - the 555 IC. Thebook is divided up into two parts - the practi-cal experiments, and the technical referenceabout the 555. All you need to build the proj-ects is school science and a bit of commonsense, the theoretical part is a bit harder andassumes that you have some idea aboutelectronics and that you know how a resistor,capacitor and a transistor works.

01.8

Please note that this is only the book andnothing else is supplied with it.

ORDER CODE: VB050

SERVICING MANUAL

HOW TO REPAIR TV’S IN SA(BLACK & WHITE TV’S)

The book aims at guiding the newcomer toTV repair through the faulty sets to easy andquick fault diagnosis. The book explains thefundamental operation of a TV receiver with-out using radio and electronic theory withcomplex mathematical equations. It isassumed that anyone attempting TV repairhas the necessary knowledge and experi-ence of fundamental electronic circuits andcomponent operation and testing. By DericAspeling, 128 pgs, 210 x 290mm.

ORDER CODE: VB047

FAULTFINDING IN COMPUTERSAND DIGITAL CIRCUITS

Modern electronic equipment is character-ized by the predominance of digital tech-niques, high clock rates and complexity. Thisapplies not only to specialized equipmentsuch as microprocessor systems, microcon-trollers and "industrial" PCs, but also to con-sumer items such as personal computers,multimedia devices, digital television and soon.The knowledge and technical skills neededto put such equipment into service, and tomaintain it in good working order, go beyondthe level of simple self-help tips and basicmeasurements.The object of this book is to help the readerto acquire this knowledge and understand-ing. It is primarily aimed at PC users, servicetechnicians, PC hobbyists and persons whoare responsible for their firm's PC systems,but it should also be useful for students andvocational trainees.This book addresses the following subjects:

Fault-finding basics:- fault sources, failure mechanisms and faultmodels- principles of testing and diagnosis- recognition and localization of faults- substitution and differential diagnosisBuilt-in provision for testing and fault-finding:- on-line error detection- accessibility- built-in self-test provisionTest and measurement techniques:- theory- measuring basic electrical values- using the oscilloscope- testing digital circuitsPractical testing and fault-finding:- an extensive treatment of testing and fault-finding at the component and assemblylevel, with specific reference to modern PCsystems.

ORDER CODE: AC609

01.9

Note: This section of the cata-logue contains kits and modules.Definitions:An electronic building kit con-sists of an instruction pamphlet,a PCB (printed circuit board) andall the electronic componentsthat are required to assemble thecomplete circuit board of the kit.The aim with a kit is for the enduser to do all the assembly workby soldering (mounting) the elec-tronic components onto the PCB.The supplied instruction pam-phlet should be used as anassembly guide.

A module is a pre-assembled kit.A module is a completely sol-dered, pre-assembled electronickit / circuit that is tested beforesale.

Please Note: Some of the kits areused with mains, 230Vac, powersupply and should only be usedunder responsible supervision.

ROBOTICS AND MECHANICAL MOTION

MOTORISED MECHANICALWOODEN KITS

A series of motorised, mechanical, wooden,non soldering kits for future engineers. Learnabout the operation of transmissions steeredby gears and driven by an electric DC motor.It is easy to build and does not require anyglue or soldering.Features:Transmission: gear drive operation,supplied with: pre-punched boards, gearbox,gears, shafts, switch, motor, battery holderand all necessary parts,instructions are easy to follow,Power Supply: 2 x 1.5V size AA cells (notincluded)Required Tools: knife, screwdriver, long-nosepliers

TYRANNOMECH

Dimensions: 410 x 175 x 75mmKIT ORDER CODE: GC138

STEGOMECH


SKELETON


ROBOMECH

Dimensions: 80 x 90 x 210mmKIT ORDER CODE: GB825

COPTERMECH


AUTOMECH


TRAINMECH

Dimensions: 218 x 95 x 150mm KIT ORDER CODE: GC142

HEXAPOD ROBOT

This Hexapod Robot kit is ideal for the futureengineer. Build this kit and find out howmuch fun electronics & mechanics can be!This Hexapod Robot uses infrared (IR) emit-ting diodes for eyes and propels itself with its6 legs. It moves backward, to the left, whiledetecting an obstacle in front of it and fromthen on it keeps moving forward as long asthe sensor does not detect any new obsta-cles. This kit contains two motors, each withits own gear set (unassembled).Specifications:power supply:Powering the Motors:

2 x 1.5V size AA cells (not included)Powering the Electronics:

9V-battery (not included)Dimensions: 130 x 140mm, 100mm height

KIT ORDER CODE: GB828

02.1

KITS & MODULES

ROBOT FROG

This is a robot kit for the future engineer.Build these kits and find out how much funelectronics & mechanics can be!The Robot Frog has a sound sensor. Controlit by clapping your hands each time that youwant to change the way it moves. Its motionchanges sequentially, with every clap, in thefollowing order:start (move forward) -> stop -> left turn ->stop -> right turn -> stop.This kit contains two motors, each with itsown gear set (unassembled).Specifications:Powering the Motors:

2 x 1.5V size AA cells (not included)Powering the Electronics:

9V-battery (not included)Dimensions: 110 x 125mm, 80mm height


ROBOT CAR

This is a robot kit for the future engineer.Build these kits and find out how much funelectronics & mechanics can be!This Robot Car makes use of a sound sen-sor. It usually moves straight forward, buteach time the sensor detects noise or whenthe car bumps into an object it will reverse tothe left and automatically go forward again.This kit contains one motor with a gear set(unassembled).Specifications:Power Supply: 2 x 1.5V size AA cells (notincluded)Dimensions: 90 x 115mm, 60mm height


CRAWLING MICROBUG

This is an attractive, brightly coloured, bug-shaped, miniature robot kit. The CrawlingMicrobug is always hungry for light and con-sequently it drives towards it.Features:it uses 2 open chassis sub-miniature motors,it has adjustable light-sensitivity that suitsalmost any light condition and controls it’s‘bug-like’ behaviour,adjustable driving speed,choose between two different walks,LED ‘eyes’ indicate the driving direction,it stops in total darknessSpecifications:Power Supply: 2 x 1.5V size AAA cells (notincluded)Dimensions: 110 x 90mm


CRAWLING MICROBUG WITH SHELL

This is the Crawling Microbug kit that is sup-plied with a bug-shaped shell. The shell ismade of lightweight plastic. This kit has thesame specifications as (GB601) except forthe additional shell.Specifications:Power Supply: 2 x1.5V size AAA cells (notincluded)Dimensions: 130 x 90mm, 50mm height

KIT ORDER CODE: AB356

RUNNING MICROBUG

This is an attractive, brightly coloured, bug-shaped, miniature robot kit. The RunningMicrobug is always hungry for light and con-sequently drives towards it!Features:It uses two open chassis sub-miniaturemotorsit has adjustable light-sensitivity that suitsalmost any light condition and controls it’s‘bug-like’ behaviourLED ‘eyes’ indicate the driving direction

it stops in total darkness.Specifications:Power Supply: 2 x 1.5V size AAA cells (notinclude)Dimensions: 100 x 60mm


SCARAB ROBOT KIT

The Scarab Robot is an attractive, bug-shaped, miniature robot that uses 2 touchsensors to detect obstacles. One must trybuilding this kit to find out just how much funelectronics and mechanics can be!When its antennas (touch sensors) detect anobstacle, it will first step back and then auto-matically execute a two-step maneuver. Themaneuver is a combination of “left turn”,“right turn”, “reverse” and “stop”. It does soin an attempt to avoid bumping hard intoobstacles or getting stuck. The robot moves about on 6 legs. Two setsof differently designed legs, which move intheir own distinct way, are supplied with thiskit.Specifications:Power Supply: 4 x 1.5V size AAA cells (not

included) use (AC589)Dimensions: 175 x 145 x 85mm

KIT ORDER CODE: AC856

LADYBUG ROBOT KIT

The Ladybug Robot is an attractive, bug-shaped, miniature robot. One must try build-ing this kit to find out just how much funelectronics and mechanics can be!It uses IR (infra-red) emitting diodes and IRsensitive photo diodes for “eyes”.The robot normally walks in a straight line.When it senses an obstacle, in front of it, itwill automatically keep on making a left turnuntil its forward path is clear again.The robot moves about on 6 legs. Two setsof differently designed legs, which move intheir own distinct way, are supplied with thiskit.Specifications:Power Supply: 4 x 1.5V size AAA cells (not

included) use (AC589)Dimensions:Robot: 120 x 150 x 85mmLength per Feeler: 40mm

KIT ORDER CODE: AC857

02.2

ESCAPE ROBOT KIT

The Escape Robot is an attractive, bug-shaped, miniature robot. One must try build-ing this kit to find out just how much funelectronics and mechanics can be!It never fails to find its way out of a maze. Ituses 3 IR (infra-red) emitting diodes to trans-mit invisible light and 1 IR receiver module toreceive IR light that is reflected back.A built-in microprocessor enables it toprocess the gathered information on itsimmediate surroundings so that it can avoidbumping into obstacle.The robot moves about on 6 legs. Two setsof differently designed legs, which move intheir own distinct way, are supplied with thiskit.Specifications:Power Supply: 4 x 1.5V size AAA cells (not

included) use (AC589)Dimensions: 140 x 150 x 100mm

KIT ORDER CODE: AC855MANUFACTURED BY: VELLEMAN

DRIVER FOR 6 WIRESTEPPER MOTORS

This module can drive a 6 wire steppermotor without using a personal computer.The direction and speed of rotation of thestepper motor’s axis can be controlled. Adouble pole switch (FB801) is required forchanging the direction of rotation. A linear1M Ohm potentiometer (HB171) is requiredfor changing the speed of rotation. The oper-ating voltage of the module and the steppermotor is the same.Specifications:Supply Voltage: 5 - 12VdcSupply Current: 2A max.Stepping Frequency: 2 - 1000 Hz

MODULE ORDER CODE: GB799MANUFACTURED BY: KEMO

COMPUTER INTERFACEFOR 4 WIRE

STEPPER MOTORS

This module drives 4-wire, bipolar steppermotors, like (GB500), by using a personalcomputer. The motor may either be con-trolled by hand, using the computer key-board, or by automatic program flow, writtenby the user. It is connected to the computer’sprinter port, LPT1, and is controlled with thesupplied software:

DOS and Win98 / NT / 2000 / ME / XP.The user manual is also supplied on disk.The operating voltage of the module and thestepper motor is the same. It is possible tooperate up to 4 of these modules simultane-ously by using the PC Interface Splitter mod-ule (GB808).Specifications:Supply Voltage: dual supply ± (4 - 18Vdc)Supply Current: 2A max.Dimensions: 120 x 50 x 24mm


COMPUTER INTERFACEFOR 6 WIRE

STEPPER MOTORS

This module drives 6-wire, unipolar steppermotors, like (GB499) and (AB217), by usinga personal computer. The motor may eitherbe controlled by hand, using the computerkeyboard, or by automatic program flow,written by the user. It is connected to thecomputer’s printer port, LPT1, and is con-trolled with the supplied software for DOSand Windows. The user manual is also sup-plied on disk. The operating voltage of themodule and the stepper motor is the same. Itis possible to operate up to 4 of these mod-ules simultaneously by using PC InterfaceSplitter module (GB808).Specifications:Supply Voltage: 5 - 18VdcSupply Current: 2A max.

Dimensions: 120 x 50 x 24mmMODULE ORDER CODE: GB754

MANUFACTURED BY: KEMO

4-WAY INTERFACE SPLITTER

This 4-way interface splitter module is meantto be used with the 4 wire stepper motordriver (GB785) or 6 wire stepper motor driver(GB754). It is connected to the computer’sprinter port, LPT1, and then up to 4 motorinterface modules may be connected andoperated independently at the 4 interfaceoutputs.


BIPOLARSTEPPER MOTOR DRIVER

This is a very useful circuit to drive bipolarstepper motors that have 4 or more wires. Asix wire unipolar stepper motor can be con-nected as a bipolar motor if the two center,(common), wires are left unused. The circuitand stepper motor may use separate supplyvoltages. It uses four MTP2955 and fourIRFZ44 high current MOSFETS. It can oper-ate either freestanding or PC-controlled. Themotor can be stepped single steps with aSTEP input. The direction of rotation can beset with the DIRection input. Both inputs areopto-isolated by the 4N25 optocouplers andshould be controlled with externally supplied5Vp-p pulses / levels. This innovative circuitonly uses standard CMOS IC's 4013 and4030.Specifications:Supply Voltage: (kit) 8 - 30Vdc

(stepper motor): 5 - 50VdcTrigger Voltage: 5VdcTrigger Current: 4.3mASupply Current: (kit) 100mA max.

(stepper motor): 6A max. per windingDimensions: 75 x 86mm, 25mm height

KIT ORDER CODE: AB134MANUFACTURED BY: DIY

02.3

UNIPOLARSTEPPERMOTOR DRIVER

This kit is a very useful circuit for driving 5, 6or 8-wire unipolar stepper motors. It canoperate either freestanding or PC-controlled.The circuit and stepper motor may use sepa-rate supply voltages. Four high currentIRFZ44 MOSFETs are used at the output.The motor can either be stepped by theinternal, variable oscillator or by external5Vp-p pulses. The direction of rotation canbe set with a switch. This innovative circuitonly uses standard CMOS ICs 4013, 4030and 4093. Full explanations are given.Specifications:Supply Voltage: (kit) 7 - 12Vdc

(stepper motor): 8 - 35VdcSupply Current: (kit) 0.1A max.

(stepper motor): 6A max. per windingDimensions: 46 x 75mm, 25mm height

KIT ORDER CODE: GB572 MANUFACTURED BY: DIY

UNIPOLAR STEPPER MOTORDRIVER (555 & UCN5804)

This kit drives any 5, 6 or 8-lead unipolarstepper motor. The circuit is based on thepurpose made stepper motor controller IC,UCN5804, from Allegro Microsystems. Allfeatures of this IC (direction, on/off, pins 9 &10) are utilised using 5 on-board SPDTswitches. A continues pulse train from a 555astable, adjustable oscillator is used to con-trol the stepper motors’ stepping rate of rota-tion. In order to do fine, single-step position-ing, switch to manual mode and press theon-board tactile switch each time to make astep. Four LEDs enable one to see thephase pattern, coils being turned on/off, dur-ing every step that is made. Three steppingmethods are supported. Full explanation isgiven.Specifications:Supply Voltage: 6 - 35VdcSupply Current per Winding: max. 1.25ADimensions: 50 x 67mm, 25mm height

KIT ORDER CODE: EB629MANUFACTURED BY: DIY

STEPPER MOTOR-CONTROL

A 6-branch unipolar stepper motor can beoperated with this kit. The kit works without acomputer. Suitable for 6 to 12V steppermotors with a maximum branch current of1.5A. The stepping rate can be adjustedbetween 15 and 240 steps per second. Anaddisional double pole, double throw (DPDT)toggle switch (DB252) is required to changethe direction of rotation. The operating volt-age of the stepper motor is the same as thesupply voltage of the kit (6 to 12VDC).

KIT ORDER CODE: FB645MANUFACTURED BY: KEMO

ENCODERSTEPPER MOTOR DRIVER

This kit illustrates the complex operationsthat can go on inside modern dedicated inte-grated circuits. A pre-programmed PIC16C54and a stepper motor driver IC UCN5804B,from Allegro Microsystems, are used in thiskit. The kit is designed for 6-wire unipolarstepper motors. A bi-directional, digital,rotary encoder is supplied to step a unipolarstepper motor. Each turning click of theencoder causes the stepper motor to turneither half a step or one step at a time. Thedirection in wich the encoder knob is turneddetermines the turning direction of the step-per motor. The driving voltage of the steppermotor is the same as the supply voltage ofthis kit. The stepper motor is not included.Specifications:Supply Voltage: 6 - 30VdcSupply Current per Winding: max. 1.25ADimensions: 46 x 57mm, 25mm height


PARALLEL PORTDUAL STEPPER MOTOR DRIVER

This kit enables users to control two unipolarstepper motors via a parallel/printer port of aPC. Four digital inputs are also included.These can be used for monitoring externalswitches and inputs. The kit does not require

any power source. The stepper motorsrequire power. The kit is designed to fit intoan extended D-shell plastic case (included).A DOS based program written specifically todrive stepper motors should be downloadedfrom the Internet:http://kitsrus.com/soft.html the file k113.zip(C source code for DOS).

KIT ORDER CODE: AA249MANUFACTURED BY: DIY

STEPPER MOTOR CARDWITH STEPPER MOTOR

This is a stepper motor card kit that is capa-ble of controlling uni- and bi-polar steppermotors (maximum 1A). A high precision, 12Vstepper motor, (AB216), and a test programis supplied with this kit. This kit has to beused together with the PC Interface Board(GB693) (not included). It is easily connect-ed to the PC interface board, via 3 wire con-nections. While the motor turns you cansimultaneously check the status of switchesusing the PC interface board or drive anoth-er stepper motor. You can always give anemergency stop signal. There are two on-board tactile push-buttons to test the cardwithout the PC Interface Board. The circuitand stepper motor have to use the samesupply voltage. This kit can be used in everyapplication where positioning is required: forexample a plotter, a printer, a valve, etc…Specifications:Motor and Circuit Supply Voltage: (depends

on the motor voltage) 7 - 25V DC or ACSupply Current:

200mA (card) + 1A max. (motor)Communication Protocol: I²CControlled by a computer printer port via

the required PC Interface Board (GB693)The address, 0 to 15, of the card is selec-table via 4 on-board DIP-switchesPlease note that only up to 4 controller cardscan be used per PC Interface BoardProgram: Turbo Pascal in DOS, Quick Basic

and Visual Basic (Win95/98/ME)Adjustable drive speedEmergency stop can be sent to one

or all cardsDimensions: 90 x 100mm, 35mm height

KIT ORDER CODE: GC061MANUFACTURED BY: VELLEMAN

1 TO 4 SERVO MOTOR DRIVERUSING PIC16C711

Using a PIC16C711 this kit will independent-ly control up to 4 servo motors. Servomotors are used in radio-controlled models

02.4

(cars, planes), robotics, theme park specialeffects, test equipment, industrial automa-tion. The motors themselves are black boxeswhich contain a motor, gearbox and decoderelectronics. Three wires go into the box; 5V,ground and signal. One potentiometer isrequired for each motor. The potentiometersand the servo motors are not supplied.Full instructions provided. The program isincluded in the instruction paper.Required potentiometer(s): 1 to 4 poten-tiometers 10k Ohm (HB167) (not included)Supply Voltage: 5V DC


BATTERY CHARGERSAND BATTERYACCESSORIES

13.8V/1A POWER SUPPLY /CHARGER

This 13.8Vdc regulated power supply mod-ule can serve as a charger specifically for12V lead acid batteries. It has an output cur-rent limit between 1 and 2 Amps. It can bepermanently connected to a 12V lead acidbattery without over charging it. It has abuilt-in output diode that prevents the batteryfrom ever discharging into the charger. It has2 output leads with spade connectors and apower on indicator LED. It requires a 16VDC / AC power supply like (PB032).

MODULE ORDER CODE: FB400

13.8V/1A POWER SUPPLY /LEAD ACID BATTERYCHARGER

This module is a regulated 13.8VDC powersupply with built-in 1.5A current limiting.It can serve as a 12V lead acid batterycharger that starts charging when the batteryvoltage decreases below 13.8V. The chargercan be left to “trickle” charge 12V lead acidbatteries indefinitely, even when the batteriesare not used. It can also be used with solarpanels to charge 12V batteries. It stopscharging when the battery voltage reaches13.8 - 14.2V.Specifications:Input Voltage: 16 - 20VdcOutput Voltage: regulated 13.8 - 14.2VdcOutput Current: 0 - 1.5A max. depending

on the charging state of the battery Short circuit and reverse current proofDimensions: 71 x 46 x 20mm

MODULE ORDER CODE: GB772

LEAD-ACID BATTERYCHARGER / CONDITIONER

This lead-acid battery charger/conditioner kitis suitable for charging and maintaining bothsealed and open type 6V and 12V lead-acidbatteries. Charging current: 0.3 or 1A. Thebattery can be hooked-up to the unit for anindefinite time, and will be kept in optimalcondition. The battery voltage and chargingcurrent are selectable, while the chargingprocess is fully automatic. The heat sink issupplied. It requires an 18V transformer.Specifications:Supply Voltage: 18VacSupply Current: 1.5A

a suitable 18V transformer is (AA750)Please Note: Do not charge NiCd, NiMH or

non-rechargeable batteries with this unitRecharge only one 6V or 12V, sealed or

open type, lead-acid battery at a timeSelectable Charging Current: 0.3 or 1AStatus Indicator LEDs: for charge, float, end-

of-charge and for reversed battey polarityProtection against reversed battery polarityDimensions: 97 x 140mm, 40mm height

KIT ORDER CODE: GC111MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K8012

CHARGING CURRENT SPLITTERFOR TWO LEAD ACID BATTERIES

This module has to be connected to the out-put of a lead acid battery charger. It maythen be used to distribute the charging cur-rent, from the charger, between two identicallead acid batteries, (of the same voltage).More current will flow to the empty battery,that has a lower voltage, than to the chargedone. This module is useful for motor cara-vans where one battery powers a televisionor radio while the other must remain chargedin order to start the motor.Specifications:Input Current: max. 8A continuousOutput: 2 lead acid batteries of the samevoltage: 6 to 24VDimensions: 61 x 35 x 23mm


UNIVERSAL NI-CD BATTERYCHARGER 5-600MA

This is a battery charger for 1.2 to 15 VoltNiCd batteries. It automatically adjusts thecharging voltage across the battery in orderto regulate the constant charging current. Anindicater LED shines while batteries arecharging. The constant charging current isset by using one of seven supplied resistors.A heatsink is supplied.Specifications:Supply Voltage: 18 - 20V (AC or DC)Supply Current: 0.6ASelect one of the following charging currents:

5, 10, 25, 45, 100, 200 or 600mA.Dimensions:PCB: 55 x 55mmHeatsink: 60 x 72 x 18mmNot Included:Transformer: 230 to 2 x 9V, 0.6A (AB888)


MANUFACTURER CODE: B079

LOW COSTUNIVERSAL BATTERY CHARGER

This is a low cost charger kit for NiCd andNiMH batteries. It has a connector socket forconnecting to a mains adapter. It is ideal forcharging the batteries of cellular phones,toys, portables, etc... Selectable chargingcurrent. LED charge indication.Specifications:Supply Voltage: from 6.5V to 21V depending

on the voltage of the battery being chargedSupply Current: same as charging currentSelect the Charging Current with a resistor:

50mA, 100mA, 200mA, 300mA or 400mAPower supply reverse polarity protectedLED Indicator: Shines while chargingDimensions: 40 x 60, 30mm height


02.5

NICD AND NIMH BATTERYCHARGER / DISCHARGER

This is an universal NiCd and NiMH batterycharger kit. It can be used to charge differentNiCd and NiMH batteries at two differentcharging rates. In order to ensure that thebattery is fully discharged prior to charging,and thus has a longer life cycle, an automat-ic discharger is also included.Specifications:Supply Voltage: 15VdcSupply Current: 800mACharging Currents: 15, 30, 55, 75, 100, 120,150, 200, 300, 400, 550 and 750mABattery Voltages: 1.2, 2.8, 3.6, 4.6, 6, 7.2,

8.4 and 9.6VAutomatic Discharge followed by the ChargecycleCharging Time:

Quick Charge: 52 minutesNormal Charge: 14 hours

Dimensions: 85 x 78mmKIT ORDER CODE: GC109

MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K7300

BATTERY GUARD 3 TO 15V

This kit warns one when the battery voltagebecomes too low in order to prevent totalbattery discharge. It can be used for batteryvoltages between 3 and 15 Volt. A LED indi-cator will light up whenever the battery volt-age falls below the predetermined value.This threshold voltage value, that is used forcomparing to the actual battery voltage, isadjustable. There is no need for any addi-tional power supply as this kit is powered bythe batteries that it is testing.



CAR BATTERY CHECKER KIT

This kit is very simple, easy to build andinexpensive. It is easily mounted inside acar’s dashboard. It is used to help preventunpleasant “surprises” by indicating a 12Vcar battery’s state of charge. This kit can be

permanently connected to a car’s battery ter-minals due to its low current consumption.It has three indicator LEDs. The red LEDshines when the battery is under charged.The green LED shines when the battery isfully charged. The orange LED shines whenthe battery is over charged.Specifications:Supply Voltage: 8 - 15VdcSupply Current: 40mA max.3 Indicator LEDsDimensions: 26 x 48mm

KIT ORDER CODE: AC927MANUFACTURED BY: SMART KIT

MANUFACTURER CODE: 1034

BATTERY GUARD FOR 12VCAR BATTERY (MODULE)

This device protects the 12V car batteryagainst total discharge by disconnecting thebattery load when the battery voltage dropsbelow 12V+/-0.2V. This device has a relayoutput with contact rating of 8A max. Therelay resets (reconnects the load) againwhen the battery is recharged to 12.5V.


POWER SUPPLIES UNREGULATED

POWER SUPPLY MODULE

This kit makes the ideal unregulated powersupply for audio circuits: power amplifiers,mixer panels, etc. The transformer is notincluded. Center tapped, toroidal core, trans-formers may be used for symmetric outputvoltages.Specifications:Symmetric Voltage Outputs:

+24Vdc and -24Vdc / 2A max.Two fuse holders for 20 x 5mm 2A fusesMaximum Transformer Voltage: 17-0-17VacMaximum Transformer / Output Current: 2APCB Dimensions: 60 x 60mm

KIT ORDER CODE: FB691 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K2667

DUAL UNREGULATED+40V AND -40V / 3A

POWER SUPPLY

Many power amplifiers require a dual DCpower supply for their operation. Usually thisconsists of some diodes and electrolyticcapacitors to convert an AC voltage to a +/-DC voltage. This kit is a dual unregulatedpower supply. It consists of a PCB, four on-board 3A/100V diodes and four 2200µF/50Velectrolytic capacitors. It has to be poweredby a center-tapped transformer (not includ-ed).Maximum Transformer Voltage: 28-0-28VacMaximum Transformer / Output Current: 3ADimensions: 48 x 75mm, 40mm height


MANUFACTURER CODE: K114

DUAL UNREGULATED+40V AND -40V / 10A

POWER SUPPLY

This is a DC power supply kit designed forhigh power audio amplifiers. It is suitable forcircuits requiring a positive and negative railvoltage of up to 45 Volts per side. This is a+40V and -40V / 10A dual unregulatedpower supply kit. This rectifying power sup-ply requires a suitable center-tapped trans-former. Never use a transformer larger than32-0-32V, as the capacitors voltage ratingwill be exceeded. It consists of a PCB, a10A/560V rectifier diode bridge and four4700µF/50V radial electrolytic filter capaci-tors.Maximum Transformer Voltage: 30-0-30VacMaximum Transformer / Output Current: 10ADimensions: 61 x 80mm, 45mm height

KIT ORDER CODE: AB340MANUFACTURED BY: VELLEMAN


02.6

POWER SUPPLY MODULE FORFB696 AND FB697 AMPLIFIERS

Many power amplifiers require a dual DCpower supply for their operation. This is a+40V and -40V / 6A dual unregulated powersupply kit. This rectifying power supplyrequires a suitable center-tapped transformer(not included). It is ideal for the Vellemanaudio power amplifiers:

200W Mono/Stereo Amplifier (FB696) and400W Mono/Stereo Amplifier (FB697)

It consists of a PCB, a 6A/140V rectifierdiode bridge and two 10 000µF/50V radialelectrolytic filter capacitors. It has 2 PCBmounted 6.3A fuses and 2 power-on indica-tor LEDs.Optional two Filter Capacitors: 2 x (AB343)Maximum Transformer Voltage: 30-0-30VacMaximum Transformer / Output Current: 6ADimensions: 77 x 116mm, 42mm height

KIT ORDER CODE: AB303MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4006

+40V AND -40V / 6APOWER SUPPLY

The ideal unregulated power supply for highpower audio amplifiers. Ideal for an amplifierthat requires +40Vdc, -40Vdc and 0V supplyvoltages and 3A current per channel. If thepower supply is used for a MONO amplifier,a 2 x 28V / 3A transformer is required. If yousupply a STEREO amplifier, the transformershould have an 6A rating, 2 x 28V / 6A.Suitable transformers: (not included)

28-0-28V / 4A (code: RB012) or30-0-30V / 5A (code: AA259)

Specifications:Symmetric Voltage Outputs:

+40Vdc / -40Vdc with 2 x 28V transformerCurrent Rating: 6A max. per supply railTwo 20 x 5mm fuse holdersMaximum Transformer Voltage: 30-0-30VacMaximum Transformer / Output Current: 6ADimensions: 58 x 106mm, 54mm height

KIT ORDER CODE: SB023MANUFACTURED BY: SMART KIT


POWER SUPPLIESFIXED REGULATED

+12V AND -12V 0.5A STABILIZEDPOWER SUPPLY

This is a symmetrical stabilized power supplythat has a +12V and -12V supply rail andcommon ground. This kit can be used formany different applications that require adual supply voltage. It can also supply24Vdc if only the +/-12Vdc outputs are used.Specifications:Supply Voltage: 12-0-12V (AC or DC)Supply Current: 500mAOutput Voltages: +12Vdc, -12Vdc and 0VOutput Current: 500mA max.Dimensions: 55 x 70mm, 40mm heightNot Included:Transformer: 12-0-12V, 0.5A (code: QB074)Two Heatsinks: 2 x (AA787) or 2 x (HB262)

KIT ORDER CODE: PB197MANUFACTURED BY: SMART KIT


UNIVERSAL DUAL POLARITYSTABILIZED POWER SUPPLY

This kit contains the parts to build a dualpolarity stabilized power supply, but itexcludes the required 2 voltage regulatorsand centre tapped transformer. Both the pos-itive regulator, a 78xx series, regulator andthe negative, a 79xx series, has to be 3 ter-minal TO-220 packages. These regulatorscan handle maximum 1A load current. Thepositive and negative regulators do not haveto be matched. You can for example:

Use a +5V (7805) and -8V (7908)regulator pair. The transformer must be8-0-8V / 1A for 1A max. load current.

Use the following pos. / neg. regulators:(there are no regulators included)+ 7805 (HB107) / - 7905 (HB115)+ 7806 (HB265) / - 7906 (HB269)+ 7808 (HB108) / - 7908 (HB116)+ 7809 (HB298) / - 7909 (GB578)+ 7812 (HB109) / - 7912 (HB117)+ 7815 (HB110) / - 7915 (HB118)and following centre tapped transformers:(there are no transformers included)6-0-6V / 1A (QB072)8-0-8V / 1A (QB073)12-0-12V / 1A (EB925)15-0-15V / 1A (AA731)

Maximum transformer voltage 18-0-18VacPCB Dimensions: 45 x 80mm



POWER SUPPLIESVARIABLE REGULATED

POWER SUPPLY 1

Batteries soon become an expensive way topower your electronic kit and electronicgames. This is a basic power supply in a boxusing two 7805 regulators. Input up to 20VAC from a transformer or power pack. Tworegulated outputs are available - one fixed at5V, the other variable. Good introduction tothree terminal regulators.



UNIVERSAL POWER SUPPLY5 - 14VDC / 1A

This is an adjustable power supply kit that issuitable for electronic circuits that require aregulated voltage between 5 and 12Vdc, andno more than 1A. It has thermal overloadprotection.Specifications:Supply Voltage: 7 - 16VdcSupply Current: 1AMaximum Power Dissipation: 7WOutput Voltage Range: 5 - 14Vdc (regulated)Output Current: max. 1APCB Dimensions: 77 x 61mm


POWER SUPPLY 0 TO 12V 0.8A

This is an adjustable electronic power supply

02.7

kit. It is simple to construct and ideal forpowering experimental circuits.Specifications:Supply Voltage: 15Vac or 15VdcSupply Current: 800mAAdjustable Output Voltage: 0 to 12VdcOutput Current: 0 - 800mA max.Not Included:

transformer (QB073)heat sink: (AB008) or larger

Dimensions: 22 x 65mm, 30mm heightKIT ORDER CODE: FB618

MANUFACTURED BY: KEMOMANUFACTURER CODE: B184

1A POWER SUPPLY KIT

This is a compact, adjustable, regulated volt-age power supply kit. The output voltage isadjusted with a pre-set potentiometer. TheLM317 regulator is used. Please note that aheatsink is required (AB008) or larger.Specifications:Maximum Supply Voltage: 39Vdc or 28VacSupply Current: 1.5AOutput Voltage Range: 1.5 - 35VdcOutput Current: 1.5A max.PCB Dimensions: 52 x 52mm


1.5 TO 30V / 1.5AADJUSTABLE POWER SUPPLY

This is a basic adjustable voltage power sup-ply using the popular three pin regulator,LM317T. You can select any voltagebetween 1.5V and 30V using a potentiome-ter. The LM317T is rated at 1.5A so youmust use a larger heat sink when drawinghigh currents. Unregulated AC or DC inputvia terminal block or power jack.Suitable transformer for upto 20V output isCode: AA579 or AA750.

KIT ORDER CODE: PB210MANUFACTURED BY: DIY


POSITIVE ADJUSTABLEPOWER SUPPLY

This is an positive, adjustable, regulatedpower supply kit. It is compact, and easy tobuild. The voltage is adjusted with a multi-turn trimpot. It is ideal for powering anyapplication requiring a positive DC supplyvoltage at current levels up to 1.5A.A dual-rail power supply can be built byusing this kit together with the kit: “NegativeAdjustable Power Supply” (EB636).Specifications:Supply Voltage: (AC or DC supply voltage)

AC Supply Voltage: 0 to 24Vac orDC Supply Voltage: 0 to 37Vdc

Note: The magnitude of the supply voltagemust be at least 3V more than the magni-tude of the kit’s output voltage.Supply Current: 1.5AAdjustable Output Voltage: 1.5 to 35VdcOutput Current: 1.5A maximumDimensions: 37 x 84mm, 45mm heightNot Included:Transformer: 12-0-12V, 1.5A (code AA753)



NEGATIVE ADJUSTABLEPOWER SUPPLY

This is a negative, adjustable, regulatedpower supply kit. It is compact, and easy tobuild. The voltage is adjusted with a multi-turn trimpot. It is ideal for powering anyapplication requiring a negative DC supplyvoltage at current levels up to 1.5A.A dual-rail power supply can be built byusing this kit together with the kit: “PositiveAdjustable Power Supply” (EB635).Specifications:Supply Voltage: (AC or DC supply voltage)

AC Supply Voltage: 0 to 24Vac orDC Supply Voltage: 0 to -37Vdc

Note: The magnitude of the supply voltagemust be at least 3V more than the magni-tude of the kit’s output voltage.Supply Current: 1.5AAdjustable Output Voltage: -1.5 to -35VdcOutput Current: 1.5A maximumDimensions: 37 x 84mm, 45mm heightNot Included:Transformer: 12-0-12V, 1.5A (code AA753)



POWER SUPPLY 1.2V TO 30V / 2A

This is a regulated, adjustable voltage powersupply kit. It makes use of a voltage regula-tor IC.Specifications:Supply Voltage: 24Vac or 34VdcSupply Current: 2AAdjustable Output Voltage: 1.2 - 30VdcOutput Current: 1.5A maximum

(2A maximum using a large heatsink andthe output voltage must exceed 15Vdc)

Dimensions: 52 x 57mm, 45mm heightNot Included:Transformer: 24Vac, 2A (AC661)Heatsink: (AB266) or (AB267)



3 TO 30 VOLT 2.5 AADJUSTABLE POWER SUPPLY

This is a variable, stabilized, voltage powersupply for electronics workshop use. It isvery reliable and therefore suitable for pro-fessional or amateur applications. No work-shop should be without one! It is short circuitprotected. It uses the well known voltageregulator IC LM723 and one 2N3055 powertransistor. A large heatsink is supplied withthis kit.Specifications:Supply Voltage: 24Vac or 35VdcSupply Current: 3AAdjustable Output Voltage: 3 - 30VdcOutput Current: 2.5A maximumShort-Circuit ProtectedDimensions:PCB: 56 x 111mm, 45mm heightHeatsink: 65 x 121 x 38mmNot Included:Transformer: 24Vac, 3A (Code: PB196).



02.8

3 TO 30 V / 3A POWER SUPPLY

This kit is meant to be used as an auxiliaryor permanent power supply for electronic cir-cuits that require a stabilised DC voltagebetween 3 and 30V provided that the currentconsumption does not exceed 3A. The volt-age is adjusted with an on-board trimmerpotentiometer. It may also be used as anadjustable power supply unit by replacing thetrimmer with a panel mountable potentiome-ter. The transformer not supplied. The heatsink is supplied with this kit.Specifications:Supply Voltage: 9 to 30Vac (depending on

the desired output voltage)Required transformer for up to 30Vdc output:

230V to 15-0-15V 2x5.33A 160VA (AB374)Adjustable Output Voltage: 3 - 30VdcMaximum Output Current: 3AOutput Voltage Ripple : 0.5mVShort-circuit protectedOverload protectedOptional: 10k Ohm potentiometer (HB167)Dimensions: 91 x 130 x 50mm


POWER SUPPLY 1.2 TO 30V / 5A

This is a stabilized, 1.2 to 30V variable volt-age, 5A, power supply kit. It makes use ofthe LM337 adjustable negative voltage regu-lator and a high-power NPN bipolar junctionbypass-transistor, like the 2N3055, to boostthe output current to 5A maximum.Specifications:Supply Voltage: (for 30 Vdc max. output)

24 Vac transformer or35Vdc

Supply Current: 5AOutput Voltage Range: 1.2 - 30 Vdc / 5ANot Included:

24Vac / 5A transformer (Code: AA752)Heatsink (AB267)



POWER SUPPLY 1.2 TO 18V / 8A

This kit is an adjustable, high-power, regulat-ed, voltage supply. It works with 5 adjustablevoltage regulators, of the LM317 type, thatare connected in parallel. Four 25A diodesare supplied that can be used for rectifyingan AC-supply voltages to DC-voltage.Specifications:Supply Voltage: 18Vac or 24VdcSupply Current: 10AAdjustable Output Voltage: 1.2 - 18VdcOutput Current: 8A maximumDimensions: 48 x 85mm, 35mm heightNot Included:Transformer: 9-0-9V, 2 x 8.8A (AB295)Heatsink: 15 x 10 x 2 cm or larger (AB266)Mica Insulators for TO220: 5 x (DB312)Insulating Bushes for TO220: 5 x (DB315)Nuts, Bolts, WashersHeatsinks for Rectifier Diodes: 2 x (AC824)Optional (instead of using four 25A diodes):Rectifier Diode Bridge: 25A, 400V (MB085)



0 - 30V / 0 - 10A POWER SUPPLY

This laboratory power supply kit is no doubta valuable tool for both the professional andamateur electronics engineer. It has a digitalvoltmeter and a digital ampere-meter withred LED, 7-segment displays on the frontpanel. This power supply is capable of oper-ating at full load for extended periods of timedue to the integrated fan. The housing,knobs, transformers and digital displays aresupplied with this kit.Specifications:Supply Voltage: 220VacPower Consumption: 300WattOutput Voltage Range:

continuously adjustable from 0 to 30VdcOutput Current Range:

current limit is adjustable from 0 to 10A8A continuously, but only 10A peaking

LED Indication: shines during a current limitDigital Voltmeter: 3 digit, 0.1V accurateDigital Ampere-meter: 3 digit, 0.01A accurateMaximum Voltage Ripple: 0.5mVrmsFine Tuning Range: over 1VShort-circuit protectionDimensions:Width: 330mmHeight: 90mmDepth: 215mmHint: You should ground the front panel if thedisplays are unstable.


INVERTERS ANDCONVERTERS DC TO DC

VOLTAGE TRANSFORMERINPUT: 6 TO 12V,

OUTPUT: 12 TO 30V

This kit makes a DC to DC Converter, that isalso called a voltage step-up power supply. Itis ideal for powering appliances that requirea higher operating voltage than what is avail-able. Example: Use this step-up power sup-ply to power 12Vdc amplifiers, CB-radiosfrom a 6V-battery. The output voltage can belimited electronically. The step-up trans-former is supplied with this kit.Specifications:Input Voltage Range: 6 - 12VdcInput Current: 5A maximumOutput Voltage:

for 6Vdc input: 12 - 13.5Vdc outputfor 12Vdc input: 15 - 30Vdc output

Output Current: 1A maximumDimensions:PCB unit: 55 x 55mm, 35mm heightTransformer: 38 x 63mm, 33mm heightNot Included:Insert a 5A fuse, (AA951), between the step-up power supply and its input voltage.Insert a 2A fuse, (AA947), at the output ofthe step-up power supply.In-line Fuse Holders: 2 x (FB471)Heatsink: 8 x 8 x 2cm or larger (AB267)



INVERTERS ANDCONVERTERS DC TO AC

FLUORESCENCE KIT 11-16 VDC8 - 40WATT

This circuit is useful for the country andcamping. It is powered from a car batteryand can light any fluorescent lamp in 8-40Watt size. The special design of the circuitensures the maximum illumination withoutinserting any spikes in the mains.Power supply: 11 to 16 VDC / 1.3AFrequency: 58 kHzDimensions: 47 x 163mm, 35mm height

KIT ORDER CODE: PB026MANUFACTURED BY: SMART KITMANUFACTURER CODE: 1069A

02.9

FLUORESCENT LAMPVOLTAGE CONVERTER 12VDC

Fluorescent lamps can be powered with thisvoltage converter module that requires only12Vdc, like a car battery. It is ideal for camp-ing, gardenhouses etc. It operates at highfrequency and low current consumption. It isenergy efficient even at full brightness.Lamps may be connected to the modulewithout any series devices like chokes orstarters!Technical data:Supply Voltage: 12 - 13.8VdcSupply Current: 0.7 - 1.5A (variable)Output Voltage: with no load > 600VOperating Frequency: 10 - 30 kHzOutput Power: 8 - 18 WattDimensions: 70 x 60 x 26 mm

(without brackets + cooling angle)MODULE ORDER CODE: GB789

FLUORESCENT LAMPVOLTAGE TRANSFORMER

Fluorescent lamp voltage transformerKIT ORDER CODE: FB543


INVERTER 12V INUP TO 220VAC 70WATT

Voltage converter for 12V car-battery up to220V alternating voltage, approx. 50 Hz(adjustable). Also necessary: 2 cooling ele-ments approx. 10 x 15 x 4 cm (or similar)and one power transformer 220V / 2 x 10V,approx. 20 to 120VA (transformer powershould be twice as much as the desired out-put power).



INVERTER 12VDC TO 220VAC /50 HZ 100 WATT

A useful project for those who like campingand caravaning but not leaving behind mod-ern facilities that require a mains power sup-ply. This circuit will convert 12 VDC to 220VAC and can supply loads of up to 150Watts. The kit includes the heatsinks for thepower transistors (transformer not included).Suitable transformer SB041.Power supply: 12VDCOutput voltage: 220VAC square waveOutput frequency: 50 Hz

KIT ORDER CODE: QB064MANUFACTURED BY: SMART KIT


INVERTER 12VDC TO 220VAC /50 HZ / 160 WATT

This inverter kit is ideal for use in cars,trucks, boats, caravans or other placeswhere only 12 volt battery power is available.Output of 220Vac for powering audio equip-ment, video recorders, television, computer,electric shaver, etc.It will automatically shut-off when the voltageof the 12V battery (supply) dropps below 9V.The heatsink is supplied.Please Note: This inverter is not suitable forelectric motors and requires a step-up trans-former (not included). Specifications:Supply Voltage: 12VdcSupply Current: (from 12V battery)

quiescent current: 0.5Arequired for full load: 15A

Output Voltage: 220VacMonitors:

Output Voltage is controlledLow Battery Voltage indication / protection

Output Frequency: 50Hz (crystal oscillator)Output Power: 160Watt max.Efficiency: 90%Noise Suppress Output Filter built inFET Power Transistors are usedDimensions:

PCB: 82 x 110mmHeatsink (supplied): 75 x 173 x 28mm

Not Included:

9-0-9V to 220V / 160VA (AB295)KIT ORDER CODE: GC036


CIRCUIT PROTECTION

LOUDSPEAKER PROTECTION UNIT9-15VDC

This kit is an ideal accessory for your audiosystem. It works with any amplifier from 1 to100 Watts and protects your speakers frompeak signals and you from unpleasant andexpensive surprises! It completely eliminatesthe possibility of loud speaker burning due tooverloading.Specifications:Supply Voltage: 9-15VdcSupply Current: 2mAMax. speaker current required by kit: 50mAMax. input power to speaker: 100W

KIT ORDER CODE: AA205MANUFACTURED BY: SMART KIT


SPEAKER PROTECTION MODULE

Faulty power amplifier output stages oftenresult in speaker voice coil burn out. Thissimple but efficient device prevents the lossof your expensive speaker. It also includesan anti-plop function. This device only pro-tects one speaker output. The power amplifi-er’s output is connected to the 2 input spadeconnectors and the speaker is connected tothe 2, spring loaded, lever connectors.Specifications:Supply Voltage: 12VdcSupply Current: 50mADC Changeover Voltage: 2VdcMinimum amplifier operating voltage: 10VdcMaximum amplifier operating voltage: 90VdcMaximum current handling: 10AmpsMaximum Audio Power: 300Wrms

MODULE ORDER CODE: AA345

LOUDSPEAKER PROTECTION UNITFOR ONE CHANNEL

Burn out of a power amplifier’s output stage

02.10

nearly always results in a dangerous directcurrent to the loudspeaker’s terminals. Inturn, this results in loudspeaker burn out.This kit is a speaker protection device thatdoes not require an additional power supply.It is simply connected between the amplifi-er’s speaker output terminals and the speak-er in the speaker cabinet. This device dis-connects the speaker as soon as a directcurrent flows through the speaker cable.Ideally suited for use in the car.Specifications:Does not require an external power supplyMaximum Input Voltage: 90VdcMaximum Current: 10AMinimum Safety Voltage: 10VdcDimensions: 40 x 67mm


LOUDSPEAKER PROTECTION UNITFOR TWO CHANNELS

This kit is a stereo speaker protectiondevice. It is connected between the amplifi-er’s speaker output terminals and the speak-ers. It prevents switch-on clicks by delayingthe speakers connections directly afterswitch-on. It also prevents DC componentson the speakers. It disconnects the speakeras soon as a direct current flows through thespeaker cable.Specifications:Power Supply: 220VacIndicator-LED:

for occuring switch-on delay andError: DC on amplifier’s speaker outputs

Switch-delay: ±6 secondsMaximum Input Voltage: 200VppMaximum Current per channel: 10AMinimum Safety Voltage: ±1VPCB Dimensions: 55 x 125mm


AUDIO SIGNALGENERATORS

FIXED FREQUENCY

1 KHZ SIGNAL GENERATOR

Features:The kits output signal: sine wave, triangle,square wave and integrator (selectable

through jumper)signal frequency: approximately 1kHz (fixed)output amplitude: adjustable from 0 to100mVrms (LEVEL potentiometer)Specifications:Power Supply: 9V battery (not included)Dimensions: 56 x 40mm

KIT ORDER CODE: FB665 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: MK105

SIGNAL-INJECTOR

Universal square-wave sound generator withapproximately 1000 Hz basic frequency anda great number of harmonic waves whichlead up to VHF-range. The signal can be lis-tened through a highly ohmic earphone orcould be amplified for loudspeakers throughan amplifier. Ideal as repair equipment forradios and amplifiers, in order to feed asound signal at various stages of the defectobject. Operating voltage: 6 to 12VDC



3 KHZ MINI SIGNAL HORN 6 TO 12V

With a mini-loudspeaker (approx. 14 x 11mm) this device emits a tone of approxi-mately 3000 Hz. Ideal for fitting it into minia-ture models, as signal unit, morse soundgenerator, etc. Of course, it is possible toconnect a greater loudspeaker.Operating voltage: 6 to 12VDC



OSCILLATOR BUILDING BLOCKS

A learning module. Build and experimentwith astable, monostable and SR flip-flopmultivibrators on the one PCB. 6 LED`s &9V battery-powered. See and understandexactly how each works. Good introductionto electronics.



SIGNAL GENERATORSVARIABLE FREQUENCY

20HZ-20KHZFUNCTION GENERATOR

An audio frequency function generator capa-ble of covering the frequency range between20Hz and 20KHz. It produces sinusoidal, tri-angular (sawtooth) and square waveforms. Itcan be used very well for accurate adjust-ments in the laboratory. It has separate levelcontrols for each waveform shape and it canbe easily set to give exactly the same signallevel for each waveform at the same time.Operating voltage: 24VACOutput voltage: 4V RMS (10V pp) Sine andTriangular10V RMS (16V pp) Square waveOutput inpedance: 600 OhmPCB size: 120x65mm



20MHZ FUNCTION GENERATOR

This is a compact function generator kit builtaround the MAX038 from Maxim IntegratedProducts. It provides sine, square and trian-gle waveforms up to 20 MHz over 3 ranges.It has fine and course frequency adjustmentcontrols. Output amplitude is adjustable. ATTL output is also provided. BNC outputconnectors are used. An enclosure with silk-screened front and rear panels is supplied.Specifications:Power Supply: 7-12V transformer (QB071)Frequency Range:

Sine: 10Hz - 20MHzSquare: 10Hz - 10MHzTriangle: 10Hz - 10MHz

Sinewave Distortion: less than 2%Squarewave Rise/Fall Time: less than 10nsOutput Voltage Range: 0 - 2 VppTTL Output: between 0 and 2 - 5V

synchronised with analogue zero crossingOutput Impedance: 50 OhmDimensions of Enclosure: 140x35x110mm



02.11

OP-AMP FUNCTION GENERATOR6 - 6000 HZ 9VDC

Good value-for money & simple circuit togenerate square, (pseudo) sine and trianglewaveforms in the 6 - 6000 Hz audio range. Ituses a quad op-amp LM348 and passivecomponents. The sine wave is made bywave shaping. It requires a 9V battery like(EB160).



METRONOME

This kit includes a miniature speaker and aLED-beat-indicator. Adjustable volume andbeats / minute by using potentiometers. On /off switch on board.Specifications:Power Supply: 9V battery (not included)Dimensions: 60 x 43mm


SQUARE WAVE OSCILLATOR5 - 18VDC

A square wave oscillator is one of thosepieces of equipment that has many uses inthe workshop yet few hobbyists have. Thiskit, based on the popular 555 timer IC, gen-erates 6 preset frequencies for 1Hz to100kHz. It has a wide operating voltage randand even provides visual indication of theoutput.PCB size: 78x50mm (Enclosure supplied)Supply voltage: 5 - 18VDC



UNIVERSAL CRYSTAL TIMEBASE

In many clocks and circuits mains frequencyis used as the time base, because of its highaccuracy. If these devices are to be suppliedby batteries (e.g. in the event of power fail-ure) another time base should be provided toprevent the clock from stopping. This kit pro-vides the standard 50Hz mains frequency,100Hz (for devices operating with hundredsof seconds) or 400Hz signals (selectable).Specifications:Output Frequency: 50, 100 or 400Hz (adapt-able for 1Hz)Supply Voltage: 5 - 25VDCSupply Current: 5mADimensions: 50 x 45mm

KIT ORDER CODE: GB660 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K2656

SOUND IMITATIONSMACHINES AND

MECHANICAL SOUNDS

ROBOT VOICE 9 TO 12 VDC

The kit distorts the introduced speech so thatit sounds like the voice of a robot. Adjustableeffects. The device should be connectedbetween the microphone and amplifier (ortape recorder).Operating voltage: 9 to 12VDC



SUPER DIESEL SHIP MOTOR

This kit produces exceptionally original, rum-bling sound of a Super Diesel motor. The fol-

lowing are independently adjustable: exhaustsystem noise, rumbling of the valves, run-ning velocity. The running velocity can beadjusted continuously to sound like an elec-tro traction motor.For loudspeaker: 4 to 8 Ohm 7 to 10 WattOperating Voltage: 7.5 to 12 VoltDimensions: 35x70mm, 30mm height



MARINE DIESEL MOTOR

The kit produces the very real noise of a run-ning marine diesel engine. The diesel soundand the running speed are adjustable.Operating Voltage: 12VDCLoudspeaker: 4 to 8 OhmDimensions: 47x55mm, 30mm height



FOUR TRAIN SOUNDS (COB PCB)WITH MOTHERBOARD 2.4 - 6VDC

The kit imitates four train sounds: whistle-blowing, chugging, level crossing bell andthe clackety clack of a train crossing abridge. Just 4 switches and 4 components toadd. Motherboard supplied to fit COB PCBand components into. Dimensions:PCB assembly: 24x33mm, 17mm heightSpeaker: 80mm diameter, 25mm heightSupply voltage: 2.4 - 6VDC (battery holderincluded)


MANUFACTURER CODE: SG1MKIT

02.12

STEAMER NOISE WITHSTEAM WHISTLE AND BELL

The kit produces very life-like the wheezingand hissing of a steamer. Furthermore asteam whistle and steam bell may resound.The noises can be released individually bymeans of a switch. The sound and speed ofthe noises are ajustable. Besides the singlenoises, it is also possible to play a programincluding all noises of a train arriving at thestation: The train approaches, becomeslouder, whistles and tinkles, enters the sta-tion vociferously, slows down and stops witha loud hissing. Operating voltage: 4.5 to 6 VoltLoudspeaker connection: 8 Ohm, 1 WattDimensions: 45x55mm, 20mm height



STEAM ENGINE SOUNDGENERATOR WITH WHISTLE

This kit generates the sound of a vintagesteam engine. The “speed” and volume isadjustable. It is great for model railroads,radio plays, stage and as a gadget. With“steam whistle”-push button.Specifications:Power Supply: 9V battery (not included)Dimensions: 65 x 78 x 30mm

KIT ORDER CODE: GB603 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: MK134

SOUND IMITATIONSANIMAL AND

INSECT SOUNDS

ELECTRONIC CRICKET

This kit can be used for fun and also to sim-ulate cricket sounds during a hot summernight. It automatically comes on when it getsdark. This Cricket’s light sensitivity is alsoadjustable. The repetition rate (time betweentwo cricket sounds) and tone of the cricketsounds are adjustable. Specifications:Power Supply: 9V battery (not included)Supply Current: 5mADimensions: 60 x 10 x 25mm


4 ANIMAL SOUNDS:HEN, CAT, COW, DOG

This Chip-on-Board PCB contains four ani-mal sounds. It requires a power supply 2.4Vto 6V. The standby current is less than 1 uA.Operating current is 0.17 to 0.23 mA.There are four animal sounds:Switch 1, catSwitch 2, henSwitch 3, cowSwitch 4, dog



ELECTRONIC DOG BARKING9 VOLT

Produces almost realistically and loudly thebarking of a dog. For one loudspeaker 8ohms, > 1 W. The barking is stored on a

special-voice-synthesizer-IC. The sound isadjustable, i.e. from little yelper to bignaughty dog. Operating voltage 9V



VARIOUS SOUNDS

CELLULAR PHONE SOUNDS(COB PCB) WITH MOTHERBOARD

2.5 - 5VDC

The cellular phone sounds kit imitates realphone tones like the engaged and ringingsounds, in total eight different electronicsounds are produced. The kit is ideal for usein childrens toys.Motherboard supplied to fit COB PCB andcomponents into. COB PCB: 16x29mm.Supply voltage: 2.5 - 5VDC (battery holderincluded)


MANUFACTURER CODE: SG02M

SOUND EFFECTS GENERATOR9VDC

An easy to build project that will create manyinteresting sound effects. It can producemany different sounds from bird chirps tosirens. The sound combinations which areproduced are practically infinite! The circuitcan be operated from a small 9VDC battery.Power supply: 9VDC / 20mAOutput power: 0.05 Watt.



SOUND GENERATOR

The ideal device for DJ's, jingles for radiostations or just to attract attention. With oneoutput for direct connection to a speaker andone line output for connecting to a mixerpanel or amplifier. The following effects maybe generated directly by means of a pushbutton :

02.13

European sirenUS sirenPhasor gunMachine gunRacing car with motor howlScreeching of car tires on a curveExplosionMortar fire followed by explosion“Wild charge tune”, “Snake charmers tune”

Specifications:Supply Voltage: 8 - 10Vdc or 9V battery (not

included)Supply Current: 100mALine Output: 1VrmsSpeaker Output: 1WPCB Dimensions: 75 x 75mm


SIRENS, ALARM BELLS,DISTRESS AND

DANGER SOUNDS

9V SIREN

A surprisingly loud siren for such a simplecircuit. Uses voltage controlled oscillator. 1/2Watt, 8 ohm speaker supplied. 9V operation.Ideal to attach to an alarm system whichrequires a siren sounder module.



PIEZO ALARM SIREN 110DB

Do you want to know what noise with a110dB sound pressure sounds like? This kitgenerates 108 to 111dB measured at 1meter distance using a sound level meter. Anenclosure (resonant cavity) with 2 pregluedpiezo sounders, with soldered red/blackleads, is also supplied. The oscillating fre-quency is swept about the resonant frequen-cy of the piezo sounders for maximum loud-ness.Specifications:Supply Voltage: 5 - 15VDCSupply Current: 400 - 500mASound Pressure: 108 - 111dBDimensions : 32 x 55 x 114mm



POLICE SIREN

Enter the world of amazing electronicsounds and noises. Create or imitate sirensof all kinds by adjusting 3 trimmers. Powerfulsound with a 2W amplifier on the PCB.Specifications:power supply : 8 - 14VDC / 1Adimensions : 79 x 57mm

KIT ORDER CODE: FB683MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K2604

FBI SIREN 12V 15W

Audible electronic siren with a tone of theamerican police siren.Operating voltage: 12V.Loudspeaker: 8 to 32 OhmPower: 3 to 15 Watt, depending on the loud-speaker.



KOJAK-SIREN 12V 15W

Especially audible siren, in rapid sequencesrising up and reducing sound (like the oneused in Kojak police cars). Due to the highoperating frequency the sound will becomeextremely aggressive and widely audible!For loudspeakers: 8 to 32 Ohm



MARTIN SIREN GERMAN POLICESIREN 12V

An especially high-powered siren with thetune similar to the german police siren:tatü...tatü...tatü.Loudspeaker connection: 8 to 16 Ohm

KIT ORDER CODE: FB555 MANUFACTURED BY: KEMO


3 SIRENS & MACHINE GUN

The classic noises little children love! Threesirens- ambulance, police and fire engines-plus a machine gun. All with 2 flashingLEDs. COB PCB 16mm x 29mm with moth-erboard.

KIT ORDER CODE: EB590 MANUFACTURED BY: DIY


8 DIFFERENT SOUNDS:SIREN, BOMB & RIFLE SOUNDS

AB683

This kit can generate 8 different sounds thatinclude siren, bomb and rifle sounds. Itmakes use of a sound generator CMOS LSIchip. This preprogrammed chip is bondedonto a PCB and is called a COB (chip-on-board). The COB, loudspeaker, battery hold-er and 8 push-button switches are supplied,one for each sound. Once a button ispressed, the sound that is associated withthat specific button starts to play for a shortwhile and then stops automatically.Specifications:Supply Voltage: 2.5 - 5Vdc

the supplied battery holder takes two 1.5Vsize AA Cells (not included)

Supply Current:Quiescent Current in stand-by: 5µAOperating Current (no speaker): 0.6mA

Number of Sounds: 8Speaker: 8 Ohm / 0.5 Watt min.

02.14

Dimensions:Speaker: 77mm diameter, 25mm heightCOB: 16 x 29mmMotherboard: 23 x 34mmBattery Holder: 17 x 30 x 65mm


MANUFACTURER CODE: SG12

SIREN SOUND GENERATOR

This kit generates 4 different sounds : policesiren, fire brigade, emergency vehicle andlaser gun. The sound pitch is adjustable (pot.RV1). On/off switch and PCB speaker areincluded.Specifications:Power Supply: 9V battery (not included)Dimensions: 60 x 40mm


SHIP SIREN

The kit produces a loud, deep hooter tonesimilar to those of the big vessels. Also suit-able for alarm-systems, door bells etc.Operating Voltage: 6 to 12 VoltLoudspeaker socket: 8 Ohm, max. 5W



FOG HORN 5W

The kit generates a deep, noisy sound simi-lar to the fog-horns of ships. Operating volt-age: 4.5 to 12 Volts. Power: max. 5Wdepending on the voltage. For 8 ohms -loudspeakers.



DESTROYER SIREN

Warship siren ’Clear decks for action’. Inrapid intervals sounds a shortly swellingtone: Uiiit... Uiiit...Power: 3 to 15 W, depending on the operat-ing voltageOperating Voltage: 6 to 12 VoltLoudspeaker: 8 Ohm



SIREN MAX. 1W, 3 TO 9VDCAIR-RAID SIREN

Loud siren with increasing and decreasingsound. Perfect for model making! Completewith loudspeaker!



SPACE SIREN 12V, 15W

Extremely audible, nerve-shattering sirensound with the attack alarm known from themovie ’Star Wars’.Operating Voltage: 12 Volt 0.3 to1.2 ALoudspeaker: 8 to 32 Ohm.Power: 3 to 15 Watt, depending on the loud-speaker



DOOR SOUNDERS,CHIMES AND GONGS

16 DOOR CHIMES

Sixteen door chime tunes. Tunes cyclethrough the sixteen tunes with each key-press. LED fluctuates according to the soundlevel. Designed for high quality melody prod-ucts. Supplied with motherboard.



MULTI-TONE CHIME

Electronic tones can be generated simplyand cheaply using the device. This kit is pri-marily intended for use as a replacement forthe traditional mechanical doorbell. Ofcourse, it can also be used for many othertypes of applications. The number of tonesmay be selected up to a maximum of three,each of which is output one after the other.This can be used to help locate the placebeing called. Volume and tone can also beset. The existing bell transformer can beused as a power supply.Specifications:adjustable tone and volume control1, 2 or 3 tones selectableloudspeaker output : 0.3W / 8ohmpower supply : 6 to 9VAC / 0.2A or 4.5V bat-tery (3 x 1.5V AA batteries (not incl.)idle current : less than 10µAdimensions : 53 x 59mm


3 TONE GONG 9 VOLT

Melodious, electronic 3-tone Gong with theSiemens IC SAB 600. Ideal as doorgong,identification signal, announcement of newsetc. Operating voltage: 9 V. For loudspeaker8 Ohm. Released through a pushbutton orwith a voltage 6 to 12V coming from thedoorbell system (DC or AC voltage).

02.15



DING/DONG DOOR CHIME(COB PCB) WITH MOTHERBOARD

AND SPEAKER 3 VDC

The chip on board PCB contains the tradi-tional ding dong door chime. All the compo-nents and switches are supplied. Extracapacitors are supplied so you may experi-ment with the ’ding’ and the ’dong’ dura-tion’s. Motherboard supplied to fit COB PCBand components into. The speaker is alsoincluded. Power supply: 3VDC (battery holder includ-ed)



MUSIC, MELODIES,TUNES AND SONGS

6 MELODY GENERATOR

Every time after pressing the key, themelody generator plays one of the 12 storedmelodies in succession. The melodiesalways play for about 15 to 25 seconds.Use: doorbell, break signal, etcOperating voltage: 3 to4.5VDCNot Included:Loudspeaker: 4 to 8 Ohm



MUSIC BOX ENGINE 3 VDC

This kit is the electronic equivalent of amechanical music box. It has a range oftunes that are contained in an IC. Tunes arestarted by light falling on an LDR. The kitcan be placed anywhere that you want atune to play when light falls on it for examplea jewely box, toy chest, cupboard etc. Twomusic IC’s provided.Power supply: 3VDC (battery holder includ-ed)



TWO MELODY TRANSISTORS KIT(SPEAKER NOT INCLUDED) 3 VDC

Two melody transistors in a TO92 package.All you have to do is connect 3VDC and aspeaker. The tune will play continuously aslong as the power is connected. The kit issuitable to use in birthday cards, childrenstoys etc. Speaker not included, suitablespeaker: PB244.Supply: 3 VDC (2 x battery holders included)


MANUFACTURER CODE: SG6KIT

TWO COMPLETE MELODY UNITS

AB685

These are two identical melody generatormodules. Each continuously rotates throughthree Christmas melodies only while the on-board switch is closed. Each has adhesivebacking and is ideal for mounting inside aChristmas card so that it sounds when it isopened. There is one preprogrammedCMOS LSI chip and one 1.5V button-cellbonded onto each PCB. The chip has a built-in oscillator and directly drives a piezo trans-ducer (speaker). This kit can easily be modi-fied to be used as a building block for doorbells, alarms etc.Specifications:Supply Voltage: 1.5 - 3Vdc3 Christmas Tunes: Jingle Bells and 2 othersDimensions: 29 x 51mm, 5.5mm height

MODULE ORDER CODE: AB685MANUFACTURED BY: DIY

MANUFACTURER CODE: SG14

ELECTRONIC MELODY:IT´S A SMALL WORLD

This kit plays the famous Waltz melody in anexpressive high-quality sound. The melodywill start through a push-button and stopautomatically. Loudspeaker included.

Operating voltage: 3VKIT ORDER CODE: FB600


ELECTRONIC MELODY:COO COO WALTZ

This kit plays the famous Waltz melody in anexpressive high-quality sound. The melodywill start through a push-button and stopautomatically. Loudspeaker included. Operating voltage: 3V



MICROPHONEPREAMPLIFIERS

MICROPHONE PREAMPLIFIER6-20V

The input impedance is adjustable for anymicrophone from 4 Ohm up to 100 k Ohm.Input: approx. 2 to 40mVOutput: max. 1.8 Vpp.Amplification is adjustable.Frequency: approx. 20 to 40.000 HzOperating Voltage: 6 to 20 Volt



MICROPHONE PREAMPLIFIER6-12V

A preamplifier to use with an electret or othermicrophone to boost the signal before feed-ing into an amplifier. It has a gain greaterthan 40dB which is more than enough formost applications. The kit is simple and easyto build. (include electret microphone)Power supply: 6 to 12VDCCurrent drain at 12V: 3mACurrent drain at 9V: 2mAPCB size: 30x43mm



02.16

PARABOLIC-MICROPHONE 9VDC

This highly sensitive microphone is able toreceive after being fitted in a half-ball-shapedreflector (divided play ball), noises andwords from more than some hundredmeters. Ideal for observing animals, fordetectives etc.Technical data:Operating voltage: 9VDCMicrophone: highly sensitive electret micro-phoneOutput impedance: 8 Ohm for headphone orloudspeakerPCB size: 55x44mm

KIT ORDER CODE: AA983MANUFACTURED BY: KEMO


SUPER STEREO MICROPHONES

This stereo audio microphone amplifierboosts sound 50 times. It is great for thehearing-impaired (e.g. when watching TV),as a gadget, science projects, ... With vol-ume control and on/off switch.Specifications:Power Supply: 3 x 1.5V AA batteries (notincluded)Dimensions: 62 x 54 x 44mm


VARIOUS AUDIOPREAMPLIFIERS

UNIVERSAL PRE-AMPLIFIERMODULE 9 - 24VDC

This mono pre-amplifier module is used toamplify weak audio input signals. It is simplyconnected between the output of a weak sig-nal source, like a microphone, and the inputof a power amplifier. The voltage gain, frominput to output, depends on the module’s

supply voltage.Specifications:Frequency Range: 10 Hz - 100k HzSupply Voltage: 9 - 24VdcSupply Current: 2mA max.Input Signal Voltage Range: 2 - 50mVOutput Voltage Range: 200mV - 1VVoltage Gain versus Supply Voltage:

65 using 9Vdc80 using 12Vdc100 using 24Vdc


UNIVERSAL, MONO, SUPER WIDEBAND PRE-AMPLIFIER

A 2-step preamplifier for 12 to 30V operatingvoltage. Input: 2 to 20mV, output: 200mV to2V. Application: pre-amplifier for high-poweramplifier, headphones-amplifier, etc.



UNIVERSAL MONO PRE-AMPLIFIER

This kit has been developed for use as apre-module for a number of audio applica-tions where there is insufficient input signalamplitude. It may be used as a microphonepre-amplifier or for signal level correction.Specifications:Power Supply: 10 - 30VdcSupply Current: 10mAOutput Impedance: 1kOhmAdjustable Signal Gain: max. 40dBFrequency Range: 20Hz to 20kHz (-3dBBandwidth)max. Input Signal Amplitude: 40mVDimensions: 30 x 44mm


UNIVERSAL STEREOPRE-AMPLIFIER

This kit is a universal, low-noise stereo pre-amplifier.Specifications:Frequency Range: 40Hz - 30kHz (-3dB

Bandwidth)max. Input Voltage: 50mVrmsAdjustable Voltage Gain: 40dB max.Output Impedance: 1KohmPower Supply: 10 - 30VdcSupply Current: 5mADimensions: 44 x 65mm


STEREO RIAA PRE-AMPLIFIER

This kit is a RIAA stereo pre-amplifier for md(record player) pick-ups. Low noise.Specifications:Supply Voltage: 10 - 30Vdc (regulated)Supply Current: 5mAGain (at 1kHz): 35dBInput Signal Range: 5 - 10mVInput Impedance: 47kOhmDimensions: 44 x 65mm


GUITAR PREAMPLIFIER WITHTONE CONTROL 9-12V

This is a preamplifier with very good specifi-cations that will satisfy even the mostdemanding users. It has BASS and TREBLEcontrols and can be connected to any ampli-fier. The circuit is small enough to be placedinside the guitar. It uses the well know IC TL-082.Power supply: 9 to 12VDCMax. current: 50mAPCB size: 55x52mm



GUITAR HEADPHONEAND PREAMPLIFIER

An electric guitar cannot be connected tojust any amplifier or audio installation. Thispre-amplifier has been designed for this pur-pose and provides you with a headphoneoutput, allowing you to practice without dis-turbing others. Moreover, it is fitted with aspecial device for tone adjustment, allowinganyone to create their personal sound.

02.17

Specifications:Adjustable ToneAdjustable Input SensitivityLow NoiseHeadphones Output Power: max. 2 x 50mW/ 32ohmMetal Enclosure includedPower Supply: 9V battery (not included)Dimensions: 70 x 30 x 105mm

KIT ORDER CODE: GB575 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4102

DIGITALLY CONTROLLEDAUDIO PREAMPLIFIER

A pre-amplifier is an indispensable device forcontrolling a power amplifier. This pre-ampli-fier was developed with DIGITAL control forall functions, so that it contains no poten-tiometers at all! All functions, such as vol-ume, tone control, balance and input selec-tion can be operated using push buttons. ALED display gives a clear indication of allsettings. All functions may be operated withan optional remote control unit (GC018).Specifications:Input Sensitivity:

PHONO RIAA: 5.5mV / 50 kOhmCD: 500mV / 32 kOhmTUNER, TAPE1 & 2: 360mV / 22 kOhm

LINE Output Level: 1VppSignal-to-noise Ratio (A weighted):

PHONO: 75dBTAPE, CD, TUNER: 100dB

Total Harmonic Distortion: 0.01%Frequency Response (-3dB): 8Hz - 150kHzChannel Separation: 90dBCross talk: -99dBHeadphones Output: 280mW / 32 OhmPower Consumption: 6W max.Dimensions: 425 x 50 x 350mmWeight: 5kg


IR TRANSMITTER FORDIGITAL PREAMPLIFIER GC017

This IR transmitter may be used to remotelyoperate the pre-amplifier (GC017). A specialkey has been provided, which allows thememory content to be preserved. Not only itsversatility, but also its aluminium housingand the special VELLEMAN tactile keyboardmakes this remote control unit kit unique.Specifications:Transmitter Range: 30mPower Supply: 9V battery (not included)Dimensions: 50 x 22 x 175mm


VALVE CONTROL AMPLIFIER

This is an audio control amplifier kit thatmakes use of valves. Connect up to four sig-nal sources to this amplifier’s stereo RCAinputs: Auxiliary, CD, Tuner and A/V audioinputs. One audio signal source is selectedat a time. This signal is split in 2: one signalis connected to the MONITOR output andthe other is amplified (x2 or x4 max.) beforebeing connected to the LINE output. TheLINE output should be connected to theinput of an audio power amplifier.Features:No compromise high-end designFour stereo audio inputsExclusive, high finish, aluminium enclosureHigh quality ALPS volume potentiometerFull valve designAuto 30 sec. muting (warm up) at power onHighly reliable reed relay input selectionSeparate left and right input sectionsProgrammable level adjustment: +6dB

additional / increase in gain for each inputRegulated DC filament supplyMute function for LINE outputOn / off switchable MONITOR output

(for tape, CDR, MD,...)Specifications:Power Supply: 230VacPower Consumption: 16W max.Input Sensitivity for 0dB (0.775Vrms) output

LINE signal with the Gain set at x4 max.:200mV min. / 50 kOhm input

Maximum Output Signal Level: 35VppOutput Load Impedance: 10 kOhm or higherSignal-to-noise Ratio: (A-weighted ref. 0dB)

for LINE Output: 100dBTotal Harmonic Distortion: 0.04% at 1kHz

using load with 47 kOhm impedanceGain: (adjustable)

x2 max. (default maximum gain) orx4 max. (when + 6dB LED indicator is on)

Frequency Bandwidth: (with x2 gain)7Hz to 150kHz within (-3dB)18Hz to 55kHz within (-0.3dB)

Channel Separation: 85dB at 0dB inputInput Cross Talk: -100dB at 0dB inputDimensions: 290 x 165 x 68mmWeight: 2.7kg


HIGH-END CONTROL AMPLIFIER

This is an audio control amplifier kit withsuperb specifications although it does notuse valves. Connect up to four signalsources to this amplifier’s stereo RCA inputs:Phono / Auxiliary, CD, Tuner and A/V audioinputs. It has a headphone output. The vol-ume knob adjusts the headphone and LINEoutputs. One audio signal source is selectedat a time. This signal is split in 2: one signalis connected to the MONITOR output andthe other is amplified (x2 or x4 max.) beforebeing connected to the LINE output. TheLINE output should be connected to theinput of an audio power amplifier.Features:No compromise high-end designFour stereo audio inputsExclusive, high finish, aluminium enclosureHigh quality ALPS volume potentiometerAudio grade selected op-ampsCapacitor-less output couplingHighly reliable reed relay input selectionSeparate left and right input sectionsProgrammable level adjustment: +6dB

additional / increase in gain for each inputHeadphones output socketMute function for LINE output (not phones)On / off switchable MONITOR output

(for tape, CDR, MD,...)Built-in phono RIAA input section and the

Phono / Aux input can be configured aseither a phono or line input

Specifications:Power Supply: 230VacPower Consumption: 6W max.Input Sensitivity for 0dB (0.775Vrms) output

LINE signal with the Gain set at x4 max.:PHONO: 3mV / 47 kOhm inputAuxiliary or LINE: 200mV / 50 kOhm input

Maximum Output Signal Level: 26VppSignal-to-noise Ratio: (A-weighted ref. 0dB)

for LINE Inputs: 105dBfor the PHONO Input: 83dB

MONITOR Output Impedance: 1 kOhmLINE Output Impedance: 360 OhmLINE Output Load Impedance: >10 kOhmHeadphones Power: 250 mW max. / 32 OhmTotal Harmonic Distortion: 0.003% at 1kHz

using load with 47 kOhm impedanceGain: (adjustable)

x2 max. (default maximum gain) orx4 max. (when + 6dB LED indicator is on)

Frequency Bandwidth: (with x2 gain)4Hz to 500kHz within (-3dB)10Hz to 100kHz within (-0.3dB)

Channel Separation: 90dB at 0dB inputInput Cross Talk: -100dB at 0dB inputDimensions: 290 x 165 x 68mmWeight: 2.2kg


02.18

AUDIO POWER AMPLIFIERS

0.5 WATT TO 8 WATT

INTRODUCTION TO CLASS ABMONO AMPLIFIERS

Using amplifier modules is modern, quickand easy but it teaches nothing about howthey work. Here is a Class AB amplifiermade from individual components which willdeliver several watts of power into an ordi-nary 8 ohm speaker. Gives hands-on learn-ing about cross-over distortion, bootstrap-ping, complementary pairs, and push-pull.Detailed explanations given.



0.5 WATT LOW VOLTAGE LM386MONO AUDIO AMPLIFIER 4-12V

A kit designed to be used as a small poweraudio amplifier or as a building block projectwhere a battery powered, variable gainaudio amplifier is required, for example radioamplifiers, ultrasonic and server drivers, volt-age converters etc. The semiconductorLM386 is a general purpose power amplifierdesigned for use in low voltage applications.Gain may be set between 20 and 200.LM386 data sheet included.Power supply: 4 to 12VDC



1 WATT LOW VOLTAGE TDA7052MONO AUDIO AMPLIFIER 6-12V

This kit is a 1 Watt peak mono amplifierusing the Philips TDA7052 IC. It is a usefulbuilding block where a battery poweredaudio amplifier is required. Requires noheatsink. Two may be used for stereo appli-cations.Output Power: 250 mW rms / 8 Ohm load

using 12Vdc supplySupply Voltage: 3 - 15 VdcSupply Current: 300 mA max.

Frequency Bandwidth: 20 - 20 000 HzKIT ORDER CODE: AB098MANUFACTURED BY: DIY


MONO AMPLIFIER 1 WATT

Small universal amplifier with a peak soundcapacity of 2 Watt. Operating voltage: 6 to 9VdcInput sensitivity: approx. 50 mVLoudspeaker connection: 8 ohmFrequency range: approx. 20 to 25000 Hz



1 WATT STEREO AUDIO AMPLIFIER

This stereo amplifier kit makes use of theKA2209 or TDA2822. It is designed forportable radios etc. Wide operating supplyvoltage of 1.8 to 9Vdc suitable for batteryoperation. Data sheet on Internet:http://www.kitsrus.com/pdf/ka2209b.pdfSpecifications:Supply Voltage: 1.8 - 9VdcStereo Output (using 4 Ohm speaker):

3Vdc supply voltage: 0.1W/ch6Vdc supply voltage: 0.65W/ch9Vdc supply voltage: 1W/ch

PCB Dimensions: 35 x 52mmKIT ORDER CODE: AB110MANUFACTURED BY: DIY


1 WATT STEREO AUDIO AMPLIFIER

This stereo amplifier kit makes use of thePhilips TDA7053. 1 Watt peak output powerper channel at 6Vdc supply voltage. It isdesigned for portable radios etc. Wide oper-ating supply voltage of 3 to 18Vdc suitablefor battery operation.Specifications:Supply Voltage: 3 - 18VdcSupply Current: 1A max.Idle Current: 16mA max.Peak Output Power per channel:

6Vdc supply voltage: 1W 4 - 8 Ohm load9Vdc supply voltage: 1W 4 - 16 Ohm12Vdc supply voltage: 2.5W 8 - 16 Ohm12Vdc supply voltage: 0.25Wrms 8 Ohm

Frequency Response -3dB: 10 - 100 000HzGain 39dBInput Impedance: 4.7kOhmPCB Dimensions: 34 x 37mm



1 WATT STEREO AUDIO AMPLIFIERWITH DC VOLUME CONTROL 12V

The TDA7053A is an integrated stereo audiopower amplifier with DC volume control in a16-pin dual-in-line plastic package. It isdesigned for use in TVs and monitors but isalso suitable for battery-operated equipment.Power Supply: 4.5 to 15V DC.



1 WATT STEREO AMPLIFIER WITHVOLUME CONTROL 4-12V

The kit uses two LM386N ICs on one PCB. Ithas independent volume control as well asan on-board jumper to change between again of 20 and 200.Power supply: 4 - 12V DCRequires speakers rated 3W or more.



2 WATT MONO AUDIO AMPLIFIER

This mono audio power amplifier kit is builtaround the National Semiconductor LM380.The peak power output is 2 Watt into a 4Ohm loudspeaker. The circuit requires only afew components. It does not require aheatsink. It is short circuit and overload pro-tected. High amplification gain.Specifications:Supply Voltage: 10 - 20 VdcSupply Current: approximately 0.3 AIdle Current: 7 - 15 mAGain: (50x) or 34 dB max.Power Output: (4 - 8 Ohm speaker loads)

2 Watt max. at 20Vdc supply voltage0.5 Wrms at 12Vdc supply voltage

Frequency Bandwidth-3dB: 20 - 100 000HzDimensions: of PCB 44 x 44mm

assembled total height: 25mm

02.19



STEREO AMPLIFIER 2 X 2.5 WATT

The amplifier has an input sensitivity ofapproximtaely 100mV. If it is desired to con-nect signal transmitters with inferior outputvoltage (eg. some microphones), a preampli-fier has to be connected in series. Any signalsource with superior output voltage as100mV, as eg crystal record player, cassettetape-recorder, diode receiver etc. can, ofcourse, be connected directly. The amplifierachieves its maximal power only with 12Voperating voltage and using a 8 ohm loud-speaker. Screened cable will prevent anyhum interferences in the amplifier. Operating Voltage: 6 to 12VLoudspeaker: 8 to 16 Ohm



3W MONO AMPLIFIER

This mono audio amplifier kit is small butpowerful. The design makes use of theTDA7267A fromST Microelectronics. It issuitable for a wide range of low voltage,audio amplifier applications.Specifications:Supply Voltage: 6 - 15VdcSupply Current: 500mA max.Maximum Output Power: 3Wrms

using 15Vdc supply voltage at 10% THDSpeaker Impedance: 4 - 8 OhmVoltage Gain: 32dB (40x)Frequency Response: 50 - 20 000HzThermal and Short Circuit ProtectionDimensions: 42 x 50mm, 20mm heightRequires: a log. 47k Ohm potentiometer:

(AB831)KIT ORDER CODE: AB956


UNIVERSAL 3.5WAMPLIFIER MODULE

A mono audio amplifier module that is capa-ble of driving a loudspeaker at 3,5 Watt.Specifications:Supply Voltage: 4.5 - 12VdcMaximum Output Power: 3,5WSpeaker Impedance: 4 - 16 OhmInput Sensitivity: 80mVFrequency Response: 40 - 20 000HzDimensions: 30 x 25 x 15mmRequires: a linear 10k Ohm potentiometer:

(HB167)MODULE ORDER CODE: GB753

3 WATT STEREO AMPLIFIER 12V

A simple stereo 3 watt per channel amplifierbased on the BA5406 power amplifier mono-lithic IC. Minimum component count. Runson 12Vdc power supply. Good general pur-pose amplifier. Dimensions = 67mm x38mm. Requires heatsink (supplied.)



6 WATT STEREO AMPLIFIER

This is a stereo class AB audio power ampli-fier built around the TDA2005 ideal for hi-fiapplications. Maximum output power of 8Wrms is obtained with 2 Ohm speaker perchannel at 16Vdc / 2A. For maximum powerIt will require a larger heatsink than what issupplied. Note that the power supply shouldbe well filtered to prevent mains hum.Specifications:Supply Voltage: 8 - 18VdcSupply Current: 2AInput Signal level: 150mV for full powerGain: 30dB max.Frequency Bandwidth -3dB: 15 - 50000kHzOutput Power per channel:

12Vdc supply voltage: 4Wrms 4 Ohm16Vdc supply voltage: 6Wrms 4 Ohm16Vdc supply voltage: 8Wrms 2 Ohm

Dimensions: of PCB is 46 x 76mmtotal assembled height: 40mm



7W MONO AUDIO AMPLIFIER

Features:This small amplifier kit is constructed aroundthe TDA2003 IC, capable of delivering4Wrms at 4ohms. The IC is completely ther-mally and short-circuit protected. A conven-tional direct voltage supply can be connect-ed.Specifications:Peak Music Power Output: 7W / 4OhmRMS Power Output: 3.5W / 4Ohm or 2W /8OhmTotal Harmonic Distortion: 0.05% (1W /1kHz)Frequency Response: 20Hz to 20kHz (-3dBBandwidth)Signal-to-Noise Ratio: 86dB (A weighted)Input Sensitivity: 40mV / 150kOhmOverload and Short-Circuit ProtectedSupply Voltage: 15Vdc (8 to 18Vdc is possi-ble)Supply Current: 0.5ADimensions: 55 x 35mm

KIT ORDER CODE: FB694MODULE ORDER CODE: AB353

MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4001 / VM114


This kit is a mono audio power amplifierusing 1 TDA2002 or TDA2003. 8 Watt peakpower for 4 Ohm load at 16Vdc. Theheatsink and all components are suppliedexcept the loudspeaker.Operating Voltage: 6 to 18 VdcSupply Current: 1.2 max.Input Sensitivity: 100 mV / 40 dB gainLoudspeakers: 2 to 8 OhmOutput Power: 4 Wrms / 4 Ohm, 12VdcFrequency Bandwidth -3dB: 20 - 40 000HzDimensions: 51 x 51 x 41mmNot Included:Heatsink: (GB550)



02.20


A Hi-fi amplifier with one IC. At the amplifiercould be connected signal sources with atleast 160mV output voltage (e.g. crystalrecord players, cassette recorders, etc.).With a pre-amplifier it will be feasible toincrease the sensitivity up to approx. 1mV.Then, it would be possible to connect mir-cophones, too. In case that you want to con-nect at the amplifier magnetic record play-ers, it will be necessary to pre-connect anequalizing pre-amplifier. The amplifier willachieve its max. power with 8 W at an oper-ating voltage of 16 V. With lower voltage, themax. power will decrease correspondingly. Operating voltage: 6 to 16 Vdc.Sensitivity: approx. 160mVLoudspeakers: 4 to 16 OhmFrequency range: 40 to 20000Hz



STEREO AMPLIFIER 2X8W

The amplifier has an input sensitivity ofapprox. 250mV. In case the signal sources,to be connected, have low output voltages(e.g. microphones), it is necessary to pre-connect a preamplifier. The amplifier willachieve maximal power solely with 15Vdcoperating voltage and with a 4 Ohm loud-speaker. When lowering operating voltagesand increasing loudspeaker impedance therated power will decrease correspondingly.Please only use screened wires when forconnections at the input of the amplifier andmake sure to connect the screening networkwith power supply ’earth’ (negative battery).The screened wire will help to prevent anyhum interferences within the amplifier. Suppy Voltage: 6 to 15VdcSupply Current: 1.5ALoudspeaker Impedance: 4 to 16 Ohm




8 WATT TO 80 WATT

10 WATT MONO HI-FI POWERAMPLIFIER

This is a general purpose mono hi-fi amplifi-er, it is based on the TDA2002 IC. It can beused with any stereo preamplifier and withtwo of these kits you can make a very goodlow power hi-fi system. It has an input sensi-tivity of 50mV and works off 9 - 16VDC sup-plies making it suitable for use as a boosterin the car or as an extra amplifier in portableequipment.Input sensitivity: 50mVOutput impedance: 2-8 ohmFreq. response: 40Hz- 15KHzPower supply: 9 to 16VDC / 1.2AQuiescent current: 20mAMax. currentL 1.2A



10 WATT STEREO AMPLIFIER 8-28V

The kit uses the TDA2009 which is a classAB dual hi-fi audio amplifier IC designed forquality stereo applications. This is a standarddata book application circuit using a mini-mum of external components. Each channelis capable of delivering 10 Watts into 4 Ohmspeakers using a 24VDC supply voltage.Supply voltage: 8 - 28VDCPCB size: 77x43mm



UNIVERSAL 12WAMPLIFIER MODULE

A mono audio amplifier module that is capa-ble of driving a loudspeaker at 12 Watt.Specifications:Operating Voltage: 6 - 16VdcMaximum Output Power: 12WSpeaker Impedance: 4 - 16 OhmInput sensitivity: 80mVFrequency Response: 40 - 20 000Hz

Dimensions: 61 x 35 x 23mmRequires: a linear 10k Ohm potentiometer:


MONO AMPLIFIER 12W

Hi-Fi amplifier, output: 4 to 12 watts,depends on operating voltage and loud-speaker.Operating voltage: 8 to 16VLoudspeaker: 1.6 to 8 ohmsFrequency range: approx. 40 to 20.000 Hz.Vi: 50mVNot Included:Heatsink: approx. 10x4x2cm



15 WATT MONO AMPLIFIERMODULE 10 TO 20 VDC

This sensitive mono amplifier module is idealfor replacing obsolete small amplifier circuits.It has two inputs, with different input sensitiv-ities, that makes it a very useful boostedextension speaker driver.Features:Short circuit proof and thermally protectedHigh (speaker) and Low (line) level inputsBoosted extension speaker driverAdjustable gain using trimmer potentiometerAutomatic quiescent current settingSingle voltage rail power supplyVertical and horizontal mounting holesSpecifications:Supply Voltage: 10 - 20VdcSupply Current: 0.5 - 1AMaximum Output Power (4 Ohm): 15 WattOutput Load Impedance: 4 - 16 OhmFrequency Response: 15Hz to 80kHzSize: 75 x 65 x 35mmNot Included:Rectifying power supply Code: AA290 andTransformer Code: QB072


UNIVERSAL 18WAMPLIFIER MODULE

A mono audio amplifier module that is capa-ble of driving a loudspeaker at 18 Wattmusic power.Specifications:Supply Voltage: 6 - 20VdcMaximum Output Power: 18W

02.21

Speaker Impedance: 4 - 16 OhmInput Sensitivity: 80mVFrequency Response: 40 - 20 000HzDimensions: 61 x 35 x 23mmRequires: a linear 10k Ohm potentiometer:


18 WATT AUDIO POWERMONO AMPLIFIER 8-18V

This kit contains the essential components tobuild a low voltage, high power mono 18WBridge Tied Load (BTL) amplifier moduleusing the Hitachi HA13118. The circuit isstraight out of the data sheet. Only a fewexternal passive components are required tomake the module. The IC contains surgeprotection circuits and thermal shutdown cir-cuits.Output power: 18W (THD = 10%) 14W (THD= 1%)Input resistance: 20 - 40k OhmFrequency response: 50Hz - 20kHz (-3dB)20Hz - 40kHz (-6dB)Current @ 18W: 2.5A (approx)Operating voltage: 8 - 18V



25 WATT MONO AMPLIFIER25-0-25VDC

Kit contains the essential components tobuild a hifi amplifier module using theLM1875 IC. Heatsink, speakers and cablesare to be supplied by the user.Power Supply: dual +/- 25VDC



BOOSTER AMPLIFIER 2 X 25W

A very well designed power amplifier suitablefor use in the car as a power booster for theexisting stereo system. It can be connecteddirectly to the output of the car STEREO(cassette player or radio). The heatsinks aresupplied.Specifications:Supply Voltage: 12VdcOutput Power: 2 x 25W / 4 Ohm speakersQuiescent Current: 50mAInput sensitivity: 200mVLoad Impedance: 4OhmPCB Dimensions: 76 x 79mm

KIT ORDER CODE: AB208MANUFACTURED BY: SMART KIT


2 X 30W AUDIO POWER AMPLIFIER

Features:This small stereo amplifier kit is constructedwith the TDA1521 IC, with a maximum out-put power capability:

2 x 15Wrms (4 Ohm)2 x 10Wrms (8 Ohm)

The IC is thermally and short-circuit protect-ed. Additional rectifier and smoothing filterare unnecessary, as an AC, (alternating cur-rent), supply voltage can be directly connect-ed to the amplifier. The heat sink is supplied.Specifications:Peak Music Power Output: 2 x 30W / 4ohmRMS Power Output: 2 x 15Wrms / 4 Ohm or

2 x 10Wrms / 8 OhmTotal Harmonic Distortion: 0.07%

specified at (1W / 1kHz)Channel Separation: 70dBFrequency Response: 7Hz to 60kHz (-3dBBandwidth)Signal-to-Noise Ratio: 98dB (A weighted)Input Sensitivity: 300mV / 150k OhmTransient Suppression On/Off SwitchOverload and Short-Circuit protection:

for max. 1 hourPower Supply: 2 x 12VacSupply Current: 2A use a centre-tapped

transformer like (PB196) (not included)Dimensions: 70 x 50mm,

KIT ORDER CODE: FB695 MODULE ORDER CODE: AB352

MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4003 / VM113

35 WATT STEREO AMPLIFIERMODULE 16 TO 32VDC

This versatile, sensitive, stereo amplifiermodule, with its large voltage and wattagerange, is ideal for replacing obsolete small tomedium amplifier circuits.Features:Short circuit proof and thermally protectedStereo: separate left and right channelsEach channel’s gain is adjusted with a

trimmer potentiometerSingle voltage rail power supplyVertical and horizontal mounting holesSpecifications:Supply Voltage: 16 - 32VdcSupply Current: 1 - 2AMaximum Output Power (4 Ohm):

35 Watt MP or 20 Watt RMSFrequency Response: 15Hz to 100kHzInput Sensitivity: 500mV for full outputInput Impedance: 100k OhmOutput Load Impedance: 4 - 16 OhmSize: 65 x 87 x 30mmNot Included:Rectifying power supply Code: AA291 andTransformer Code: AA579 or AA750


40W POWERAMPLIFIER MODULE

Audio amplifier module that is capable ofdriving loudspeakers at 40 Watt musicpower.Specifications:Supply Voltage: 6 - 16VdcLoudspeaker Impedance: 4 - 8 OhmMaximum Output Power: 40W into 4 Ohm

loud speaker using 16Vdc supply voltageInput Sensitivity: 500mVFrequency Range: 20 - 25 000HzDimensions: 61 x 35 x 23mmRequires: a linear 10k Ohm potentiometer:

(HB167) and alsoNot Included:Heat Sink: approx. 10 x 4 x 2 cm


50 WATT MONO AMPLIFIERMODULE 10 TO 36 VDC

02.22

This sensitive mono amplifier, with its widevoltage range and on board gain control, isideal for replacing obsolete medium powerICs and amplifier circuits.Features:Short circuit proof and thermally protectedAdjustable gain using trimmer potentiometerAutomatic quiescent current settingWide supply voltage rangeSingle voltage rail power supplyVertical and horizontal mounting holesSpecifications:Supply Voltage: 10 to 36 VdcSupply Current: 1.5 - 3 AMaximum Output Power (4 Ohm):

50 Watt MP or 25 Watt RMSFrequency Response: 15Hz to 80kHzInput Sensitivity: 200mV for full outputInput Impedance 100k OhmOutput Load Impedance: 4 - 16 OhmDimensions: 65 x 80 x 30mmNot Included:Rectifying power supply Code: AA291 andtransformer Code: AA753 or PB196


50 WATT MONO AMPLIFIER

This is a mono 50Watt rms power amplifierkit that makes use of the ST ElectronicsTDA7294. It is intended to be used as aclass AB, high-quality, Hi-Fi amplifier. Itrequires a large, high power heatsink anddual voltage supply.Specifications:Power Supply: ±30Vdc dual supplySupply Current: ±2AInput Sensitivity: 1.3Vpp for full powerInput Impedance: 10 kOhmFrequency Response: 16Hz - 100kHzSlew Rate: 10V / µsPower Output:

50Wrms into 8 Ohm loudspeaker82Wrms into 4 Ohm loudspeaker

Not Included:Heatsink: 1.4 °C/W use (AB267) and larger




High-quality Hi-Fi amplifier including bridgecircuit with IC. Power: 50W music, 30W sine. Operating voltage: 6 to 18 VoltCurrent supply: max. 3ALoudspeaker: 4 to 8 Ohm

Sensibility: 300mVFrequency: 20 to 30.000 HzNot Included:Heatsink: 10x4x2cm



50 WATT STEREO AUDIOAMPLIFIER MODULE

(21-0-21VDC DUAL SUPPLY)

This robust, versatile, stereo amplifier mod-ule, with its large voltage and wattage range,is ideal for replacing obsolete small to medi-um amplifier circuits. Its efficient dual supplyconfiguration giving more watts and clearsound makes it an ideal hi-fi building block.Features:Short circuit proof and thermally protectedStereo: separate left and right channelsEach channel’s gain is adjusted with a

trimmer potentiometerDual voltage rail power supplyPower on mute-off of output signalVertical and horizontal mounting holesSpecifications:Dual Supply Voltage: -21Vdc and +21VdcSupply Current: 1.2 - 2.5AMaximum Output Power (4 Ohm):

50 Watt MP or 25 Watt RMSFrequency Response: 15Hz to 60kHzInput Sensitivity: 800mV for full outputInput Impedance: 100k OhmOutput Load Impedance: 4 - 16 OhmSize: 65 x 82 x 30mmNot Included:Rectifying power supply Code: AA292 andtransformer Code: PB196 or AA731


60 WATT MONOHI-FI POWER AMPLIFIER

This is a very well designed power amplifierthat will give you true hi-fi quality. An amplifi-er for the most demanding constructors. Thecircuit incorporates electronic protection forthe output transistors. Suitable power supplySB023 and transformer RB012.Output power: 60W / 8 ohm or 80W / 4 ohm(RMS)Supply voltage: 40-0-40 VDC (8 Ohm load)Supply voltage: 30-0-30 VDC (4 Ohm load)Quiescent current: 60mAMax. current: 4A

Amplification factor: 24Sensitivity: 0.707-1.5 VFreq. response: 5-35,000 HzDistortion: 1 kHz - 0.05%, 10 KHz-0.08%, 20kHz - 0.1%

KIT ORDER CODE: QB002MANUFACTURED BY: SMART KIT



A high quality power amplifier using aTDA2030 amplifier IC.Operating voltage: 24 to 40 V max.Loudspeaker: 4 to 16 OhmFrequency Range: 20 to 20.000 HzNot Included:Heatsink: min. 15 x 5 x 3 cmthermal resistance < 2K/W andInsulating material for 3 x TO220 packages




80 WATT TO 400 WATT

140 WATT MONO AUDIO AMPLIFIERMODULE (40-0-40V DUAL SUPPLY)

This mono amplifier module gives the high-est practical wattage obtainable from a sin-gle IC without forced cooling. The amplifier isideal for use as an active speaker driver, PAamplifier or hi-fi building block. The heatsinkis supplied with this module.Features:Short circuit proof and thermally protectedAdjustable gain using trimmer potentiometerDual voltage rail power supplyPower on mute-off of output signalMute and standby functionsProduces full output into both 4 or 8 OhmVertical and horizontal mounting holesSpecifications:Dual Supply Voltage: 30-0-30 Vdc (4 Ohm)Dual Supply Voltage: 40-0-40 Vdc (8 Ohm)Supply Current: 1.2 - 2.5 AMaximum Output Power (4 - 8 Ohm):

140 Watt MP or 70 Watt RMSFrequency Response: 15Hz to 60kHzInput Sensitivity: 1.3V for full outputInput Impedance: 100k OhmOutput Load Impedance: 4 - 16 OhmDimensions:Amplifier Module: 62 x 65 x 30mmHeat Sink: 72 x 115 x 35mm (is supplied)

02.23

Not Included:Rectifying power supply Code: AA258 andTransformer Code: GB995 or AA275


STEREO 70W RMS/CHANNEL(OR 140W RMS MONO)

POWER AMPLIFIER

This stereo amplifier module gives the high-est practical wattage obtainable from a pairof ICs without forced cooling. The amplifier isideal for use as an active speaker driver, PAamplifier or hi-fi building block. The heatsinkis supplied with this module.Features:Short circuit proof and thermally protectedSafe operating area protectedStereo: separate left and right channelsEach channel’s gain is adjusted with a

trimmer potentiometerOn-board rectifying power supply, but thetransformer is not includedPower on mute and anti plop circuitMute and standby functions connector pinsAn on-board, full wattage rated, heat sink issupplied with this amplifier moduleProduces full output into both 4 or 8 OhmCan also be modified to be a 300W PMPOor 140W RMS mono bridged power amplifierSpecifications:Supply Voltage (4 Ohm): dual 21-0-21 VacSupply Voltage (8 Ohm): dual 30-0-30 VacSupply Current: min. 3A - ideally 5AMaximum Output Power per Channel:

140 Watt PMPO or 70Watt RMSFrequency Response: 15Hz to 60kHzInput Sensitivity: 1.3V for full outputInput Impedance: 100k OhmOutput Load Impedance: 4 - 16 OhmSize: 90 x 205 x 55mm (including heatsink)Not Included:Transformer Code: (AA275) or (RB012)


CAR BOOSTER 2 X 100W

At last a kit that enables you to build anaffordable high power amplifier for your car.Thanks to its universal connections, thispower amplifier may be connected to anyequipment. For trucks, it can be adapted tobe supplied from a 24V source. Doubleswitched mode power supply (PWM) withMOSFET transistors. The heat sink andhousing is supplied.Specifications:Power Supply: 10 - 16Vdc

can be adjusted for 24Vdc supply voltageOutput Power: 2 x 100W max.CD / LINE / LS input and selectableFrequency Bandwidth: 10Hz - 100kHz with

the signal connected at the CD input.Input Impedance: 47 kOhm or 135 OhmDimensions: 250 x 190 x 50mm


ANTI SPEAKER PLOP FORCAR BOOSTER GC037

This kit is used to prevent any annoying plopfrom occurring in speakers when switchingthe car booster, (GC037), on and off. In addi-tion, it provides protection for the MOSFETtransistors and the car battery (monitoringthe voltage drop). The entire circuit can bebuilt into the the housing of the car booster.Specifications:Only suitable for CAR BOOSTER 2 X 100W

kit with order code GC037Soft start of the switched mode power supplySwitch-on delay of the speakers: ± 2 sec.Immediate switch-off of the speakers when

the car booster is switched offBattery Voltage Monitor: switch off at 10VPCB Dimensions: 57 x 51mm


200W MONO AMPLIFIER

High-power mono amplifier kit of top-classquality for a loudspeaker from 4 to16 Ohm.It makes use of two TDA2030 amplifier ICs.Operating voltage: 24 to 36V max. 5AFrequency Range: 20 to 20.000 HzInput Sensitivity: 0.5 - 0.8VNot Included:Heatsink: min. dimensions are 20x10x4cm

(thermal resistance < 1K/W) andInsulators for six TO220 packages



DISCRETE 200WMONO POWER AMPLIFIER

This 200W mono amplifier kit is excellentvalue for money. Only discrete componentsare used in this design. The output section ofthe amplifier makes use of epitaxial darling-ton transistors. The amplifier is overload and

short-circuit protected. It is ideal for use inan active speaker system, driving a sub-woofer, guitar amplifier, home theatre sys-tems etc.The kit includes an AC to DC voltage rectify-ing power supply. The transistor mica insula-tors, insulating bushes, washers, nuts andbolts are supplied. The heatsink and trans-former are not included.Specifications:Supply Voltage: 2 x 25 - 30VacSupply Current: 2APeak Music Power Output:

200W into one 4 Ohm loudspeakerRMS Output Power:

100W into one 4 Ohm loudspeaker70W into one 8 Ohm loudspeaker

Distortion: 0.02% @ 1KHz / 10WDamping Factor: >800Frequency Response (-3dB): 3Hz - 200kHzInput Sensitivity: 0.6VrmsSignal-to-Noise Ratio: 115dBPCB dimensions: 107 x 62mmNot Included:Heatsink: 173 x 75 x 28mm (AC885) andTransformer: 230 to 2 x 30V, 2A (AC884)

KIT ORDER CODE: AC858MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K8060

200W MONO / STEREO AMPLIFIER

Universal, robust and compact are the wordsto describe this amplifier kit.Universal:A stereo or a mono amplifier. Three inputsensitivities are selectable.Robust:Overload and short-circuit protection, protec-tion against incorrect power supply polarityand thermally protected too. Speaker tran-sient suppression.Compact:The PCB housing also functions as theheatsink. The amplifier may be used as abuilt-in module, or as a freestanding unit.Specifications:RMS Output Power:

2 x 50W / 4Ohm ; 2 x 40W / 8OhmRMS Mono-Bridged Output Power:

100W / 8OhmTotal Music Output Power: 200WHarmonic Distortion: 0.01% at 1kHzSignal-to-Noise Ratio: 102dB (A weighted)Stereo Channel Separation: 85dBDamping Factor (at 100Hz): > 1000Input Impedance: 22kOhmInput Sensitivity: either 300mV, 550mV or 1VswitchableThermal Protection: max. 1hourShort-Circuit and Overload Protection: max.10 sec.Supply Voltage: + 28Vdc and - 28Vdc max.Supply Current:

For two x 8 Ohm loudspeakers: 2.5A max.For two x 4 Ohm loudspeakers: 4A max.Mono-Bridged single 8 Ohm: 4A max.

Required Transformer: (not included)230V to 18-0-18V 2x4.44A 160VA (GB995)

Required Power Supply: (not included)50V-0-50Vdc / 6A Module (AA258) or+40V and -40V / 6A kit (AB303)

Dimensions: 210 x 85 x 64mm

02.24

KIT ORDER CODE: FB696 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4004B

65W MONO AUDIOVALVE AMPLIFIER

This is a valve audio power amplifier kit. Ithas one channel, low distortion, deep bassand delivers up to 65 Watt of pure class Apower. An attractive enclosure, with chromeplated valve base rings and heavy duty cabi-net feet, has been supplied to match thisstate-of-the-art design.Features:Four quality KT88 output valves are used

in a push-pull combinationGold plated speaker and RCA connectionsEasy bias adjustment with LED readoutStandby mode stretches valve lifeSoft start prevents fuse tripping at power-upVery high quality components are usedRemovable cabinet bottomTransformers for power and output suppliedSpecifications:Power Supply: 230VacMaximum Power Consumption: 300VARMS Output Power: 65W class A into

one 4 or 8 Ohm loudspeakerValves: 4 x KT88, 1 x ECC81, 1 x ECC82Bandwidth (-3dB): 8Hz to 80kHz at 1WHarmonic Distortion: 0.1% at 1W / 1kHzSignal-to-Noise Ratio: 110dB (A-weighted)Input Sensitivity: 1Vrms min. (adjustable)Dimensions: 360 x 360 x 160mm


90W RMS MONO AUDIOVALVE AMPLIFIER

Upgrade your guitar amplifier, jukebox orconstruct your own audio system with thissuperb valve amplifier kit. It has one chan-nel, low distortion, deep bass and deliversup to 90 Watt of audio power. It will satisfyeven the most critical listener. A single PCBis used and the manual, valves, toroidalpower and output transformers are suppliedPlease note that this kit does not include anyenclosure.Features:Four quality EL34 output valves are used

in a push-pull combinationEasy bias adjustment with LED readoutStandby mode stretches valve lifeSoft start prevents fuse tripping at power-upVery high quality components are used

Specifications:Power Supply: 230VacPower Consumption:

required at full power: 230Win standby mode: 60W

RMS Output Power: 90W intoone 4 or 8 Ohm loudspeaker

Valves: 4 x EL34, 1 x ECC81, 1 x ECC82Bandwidth (-3dB): 2Hz to 125kHz at 1WHarmonic Distortion: 0.1% at 1W / 1kHzSignal-to-Noise Ratio: 104dB (A-weighted)Input Sensitivity: 1Vrms min. (adjustable)PCB Dimensions: 245 x 320mm


HIGH-END 90W RMS MONOMOSFET POWER AMPLIFIER

This is a mono MOSFET power amplifier kit.This high-end design has superb specifica-tions. Special attention was given to theexclusive, high finish, solid aluminium enclo-sure. The power output level indicator, withbacklight, is very pleasing to the eye.Features:No compromise high finish, high-end designHigh grade speaker and input connectionsIdeal to place next to the speaker (shorter

speaker wires are required)Bypass output to drive bi-wired speakers

using separate amplifiersAuto-power on mode when an input signal is

sensedAuto-standby function after 15 minutes when

no input signal has been sensedHigh quality D-MOS IC output stageRobust supply with total of 40mF capacitorsRelay-less speaker DC protectionReal Clipping distortion LED indicatorOverheating protection with LED indicatorOverload protectionSpecifications:Power Supply: 230VacMaximum Power Consumption: 100WSignal-to-noise Ratio (A-weighted ref. max.

out): 105dBTotal Harmonic Distortion:

0.003% at 1kHz ref. 1WFrequency Bandwidth (-3dB):

9Hz to 120kHz in 50WInput:Input Sensitivity for maximum output:

0dBm 1Vpp (0.775Vrms)Input Impedance: 15 kOhmMinimum auto-power switch on voltage:

5mVrmsOutput:Maximum RMS Output Power:

90W / 4 Ohm and 70W / 8 Ohm speakerMinimum Load Impedance: 4 Ohm speakerDamping Factor (ref. 8 Ohm / 100Hz): 1000Dimensions: 290 x 165 x 68mmWeight: 3.4kg


2 X 90W AUDIO VALVE AMPLIFIERWITH CHROME FINISH

For most of us a high power valve amplifieris unaffordable. This kit changes that, so thatnow everybody can enjoy that sublime “valvesound”. The sound of valves has never beensurpassed by transistors nor by FETs. In thecourse of developing this amplifier, specialattention was given to the housing so thatthe expensive valves are on display in a waythat is very pleasing to the eye. The weakestpoint of an valve amplifier are the outputtransformers ; that’s why we use two ultra-linear and over-rated output transformers(toroidal) to guarantee a rich bass response.To extend the life of the precious valves, theamplifier is provided with a switch-on delay,(1 minute), so that the high voltage supply isswitched on after the valves have warmedup.Features:Pure valve sound with high quality EL34valvesUltra-linear and output transformers(toroidal)High quality black and chrome housing:

chrome valve socket coversRemovable bottom for easy access andserviceGold plated input and speaker terminalsEasy bias adjustment with LED indicationStandby function“Soft start” circuit for power transformerSpecifications:RMS Output Power:

2 x 0 - 15 W class A2 x 15 - 90 W class AB

Output Impedance: 4 or 8 OhmPower Bandwidth (-3dB): 15Hz - 40kHz

for 50W outputFrequency Range (-3dB): 8Hz - 80kHz

for 1W outputHarmonic Distortion:

02.25

0.1% (1kHz at 1W)0.7% (1kHz at 90W)

Signal-to-noise Ratio: > 105dB(A-weighted ref. 90W)

Channel Separation: > 75dB (ref. 90W) Input Impedance: 34 kOhmInput Sensitivity: 1Vrms for 90W outputDamping Factor: > 10 (at 100Hz)Weight: 17kgDimensions: 425 x 130 x 350mm


2 X 90W AUDIO VALVE AMPLIFIERWITH BLACK FINISH

This valve power amplifier kit has the samespecifications as the 2 x 90Wrms valveamplifier, (GC015), except that this amplifi-er’s housing has a black instead of chromefinish.

KIT ORDER CODE: GC016MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4040B

400W MONO / STEREO AMPLIFIER

This kit is a universal, robust and compactaudio power amplifier.Universal:It may be configured as a stereo or monoamplifier. Three input sensitivities are selec-table.Robust:Overload and short-circuit protection, protec-tion against incorrect power supply polarityand also thermally protected. Speaker tran-sient suppression.Compact:The PCB housing also functions as theheatsink. The amplifier may be used as abuilt-in module, or as a freestanding unit.Specifications:RMS Output Power:

2 x 100W / 4ohm or 2 x 75W / 8ohmRMS Mono-Bridged Output Power: 200W /8ohmTotal Music Output Power: 400WTotal Harmonic Distortion: 0.003% specifiedat 1kHzSignal-to-Noise Ratio: 96dB (A-weighted)Stereo Channel Separation: 76dBDamping Factor (at 100Hz): > 2000Input Impedance: 22kOhmInput Sensitivity: either 150mV, 300mV or950mV (selectable)Supply Voltage:For 8 Ohm Speakers:

+(40 to 45)Vdc and -(40 to 45)Vdc / 2.5ARequired: (Not included)+40V and -40V / 6A kit (AB303) or50V-0-50Vdc / 6A Module (AA258) and30-0-30 V Transformer (AA259)

For 4 Ohm Speakers or Mono-Bridged:+(30 to 35)Vdc and -(30 to 35)Vdc / 5ARequired: (Not included)+40V and -40V / 6A kit (AB303) or50V-0-50Vdc / 6A Module (AA258) and25-0-25 V Transformer (AA275)

Dimensions: 350 x 62 x 85mmKIT ORDER CODE: FB697

MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4005B

300W MONO MOSFET AMPLIFIER

This kit is a mono MOSFET audio poweramplifier that meets the strictest standardsfor quality and robustness. The final outputstage is carefully designed for Class A oper-ation, though without unnecessary powerloss. It is called “Efficient Class A”. There areno adjustments required. The heatsink andtransformer are included. Ideally suited forinstallations in disco, bars and active speak-er systems.Specifications:Peak Music Power Output:

300W / 4 Ohm or 200W / 8 OhmRMS Power Output:

155W / 4 Ohm or 100W / 8 OhmTotal Harmonic Distortion: 0.005%Damping Factor: > 600Input Sensitivity: 1VrmsSignal-to-Noise Ratio: 112dB (A-weighted)Frequency Response: 3Hz - 120kHzSpeaker Switch-On Delay and SpeakerProtectionThermal and Short-Circuit ProtectionPower Supply: 230VacDimensions: 270 x 90 x 140mmWeight: 4.8kg


300W RMS MOSFET MONO AUDIOAMPLIFIER WITH POWER SUPPLY

This powerful state of the art MOSFETpower amplifier gives true hi-fi performance.The generous power supply with its toroidaltransformer and the use of constant currentgenerators permit it to have a superior slewrate. This very high speed response timeenables it to accurately reproduce even thefastest changes in the music, giving cleancrisp sound right through the audio spec-trum. Two amplifiers can be used at 600WRMS in dual bridge operation.Specifications:Supply voltage: 220Vac

(a 12Vdc output point is included)Output Power (4 Ohm): 310 Watt RMSOutput Power (8 Ohm): 180 Watt RMSOutput Load Impedance: 4 - 16 OhmFrequency response: 15Hz - 60kHzInput sensitivity: 0.775V RMS for full outputInput impedance: 47k OhmHarmonic Distortion: less than 0.01%Slew rate: 100V/µsSignal to Noise Ratio: 105dB

(measured at 1W into an 8 Ohm load)Maximum Heatsink Temperature: 100°CDimensions:

350 x 100 x 115mm (including heatsink)MODULE ORDER CODE: AA877

600W MONO / STEREOMOSFET AMPLIFIER

This audio power amplifier meets thestrictest standards for quality and robust-ness. Using a very special circuit. The endstage is always set to CLASS A, without anyunnecessary loss of power. That is why it iscalled “EFFICIENT CLASS A”. It is stereowith two separate mono amplifiers. Byswitching both channels into a bridge config-uration, a mono amplifier with double poweris obtained.A major advantage of this amplifier kit is thatNOT A SINGLE ADJUSTMENT is needed toany of the settings ! It comes complete withheatsinks, transformers, housing and frontpanel.Optional: a LED power meter is availablewith order code (GC014).Specifications:Power Supply: 230Vac / 50HzPower Consumption: 450W max.Music Power: 2 x 300W / 4 Ohm speakers

2 x 200W / 8 Ohm speakerRMS Power: 2 x 155W / 4 Ohm speakers

2 x 100W / 8 Ohm speakersBridged Configuration Power: (Music Power)

600W Mono into one 8 Ohm speakerHarmonic Distortion: 0.005%Damping Factor: > 600Input Sensitivity: 1VrmsSignal-to-noise Ratio: 112dB (A-weighted)Frequency Response: 3Hz - 120kHzSpeaker switch-on Delay and ProtectionThermal and Short-circuit Protection Dimensions: 425 x 90 x 355mmWeight: 11kg


MONO / STEREOLED POWER METER FOR

MOSFET AMPLIFIER GC013

This LED power meter kit has to be built intothe GC013 MOSFET amplifier in order todisplay amplifier power output. It includestwo meter panels that are mounted behindthe correct scale, which has to be illuminat-ed, according to the speakers connected tothe amplifier (4 or 8 Ohms). When the ampli-fier is switched into a bridge configuration,then both meters may be connected inseries.Specifications:Stereo Scale: (2 vertical displays)

0.001 to 100W / 8 Ohm speakers or0.002 to 200W / 4 Ohm speakers

Each panel with 12 power levels, dividedover 12 LEDs, another 16 LEDs for scaleillumination

02.26

Mono Bridge Configuration: (horizontal)0.001 to 400W / 8 Ohm speaker

The two panels are used together to indicate24 power levels, divided over 24 LEDsSupply Voltage: + 40V and - 40V supplied bythe amplifier GC013Dimensions: 78 x 72mm

KIT ORDER CODE: GC014 MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K4021

AUDIO SIGNALMODIFIERS

VOLUME CONTROL WITHRF REMOTE CONTROLLER

This is a stereo, passive, audio volume con-trol kit with RF remote controller. The volumeknob, (potentiometer), is motorised. It can becontrolled either by the supplied, keychain-style, RF remote control unit or manually.It can be connected to two stereo signalsources and it has one stereo signal output.It can select only one signal source at atime. The selected input signal is first attenu-ated by the stereo potentiometer, (volumecontrol), before being connect to the signaloutput. The signal output of this deviceshould only be connected to the input of apre-amplifier or power amplifier. This devicecan not amplify the input signal, but onlyattenuate it, (make it smaller).The 3-function, RF remote control unit hastwo push-buttons: one for volume up and theother for volume down. Pressing both but-tons simultaneously changes the input signalselection.Features:Gold plated RCA connectorsStereo audio signal path only consists ofpassive componentsMotor or Manual operation is possibleRF remote control for all functionsThe RF remote does not need to 'see' the

receiver like IR doesSelf-learning codeRange: 15m max.Relay (DPDT) controlled input selectionPlease note that the RF remote control unitrequires a 12V battery (DB247).

Specifications:Volume Control with Volume Knob:Power Supply: 12VdcSupply Current: 300mATwo Stereo Audio Inputs: RCA connections

Input Impedance: 5 kOhmInput Signals Range: 1Vpp (line level)

One Stereo Audio Output: RCA connectionsOutput impedance Range: 0 to 2.5 kOhmOutput Signal Range: 0 to 1Vpp (line level)the output signal amplitude is adjustable tobe smaller than or equal to the input signal

Volume Control: motorised, stereo, 5 kOhm,0.1W, Log., single turn potentiometer

Volume Control Speed: 15s (min. to max.)Indicator LEDs:

Two for channel 1 or 2 input selectionTwo for volume up or volume down action

Dimensions: 235 x 165 x 47mm

RF remote control unit:Power Supply: 12V (A23) battery (DB247)

(not included)keychain-style with 2 push-button switchesOperating Frequency: 433MHzApproved design: (report BLC/96-0452

according to I-ETS 300 220)Dimensions: 39 x 15 x 57mm


ELECTRONIC STEREOVOLUME CONTROL

This is a stereo audio volume controller kit. Ithas a built-in IR-receiver that enables one tocontrol the volume using an IR remote con-trol. The 2-Channel IR Remote Transmitterkit (AB299) (not included) will be suitable.This kit controls the volume of line-levelaudio signals, suitable for PC or hi-fi applica-tions. It is small enough to be built into exist-ing units e.g. CD & DVD players, ...Specifications:Supply Voltage: 9 - 12VdcSupply Current: 100mA2 Tactile Push-button Switches:

for volume up / down (mute)‘Mute’-function with auto fade-inSignal Amplitude: stereo line level input and

output: 2Vrms max.Volume Range: 0dB to -78dB (62 steps)Dimensions: 82 x 35mm, 15mm heightOptional: 2-Channel IR Remote Transmitterkit (AB299)

KIT ORDER CODE: AB322MANUFACTURED BY: VELLEMANMANUFACTURER CODE: MK163

IR ELECTRONIC VOLUME CONTROL

This is a stereo audio volume controller kit. Ithas a built-in IR-receiver that enables one tocontrol the volume using an IR remote con-trol. The 2-Channel IR Remote Transmitterkit (AB299) (not included) will be suitable.The enclosure is supplied with the kit. It issuitable for PC or hi-fi applications. It can beplaced next to existing units like CD, DVDplayer, ...Specifications:Supply Voltage: 9 - 12VdcSupply Current: 100mAIR control of volume: up / down (mute)‘Mute’-function with auto fade-in

Signal Amplitude: stereo line level input andoutput: 2Vrms max.

Volume Range: 0dB to -78dB (62 steps)LED volume indicationDimensions: 80 x 55mm, 33mm heightOptional: 2-Channel IR Remote Transmitterkit (AB299)

KIT ORDER CODE: AB323MANUFACTURED BY: VELLEMANMANUFACTURER CODE: MK164

MONO SOUND CONTROLLER

This mono sound controller must be super-posed to the mono final amplifier. Trebles,basses and volume are adjustable separate-ly.Operating Voltage: 9 to 18 Volt



3-INPUTS MONO MIXER 18 VDC

This is an easy to build, inexpensive fullyfeatured mono mixer. It will prove itself veryuseful in amateur FM transmitters, for mixingthe output of musical instruments, in disco’sand more. The circuit allows for individualsetting of the input sensitivity of each inputand also has separate BASS and TREBLEcontrols.Input sensitivity: 150-300 mV pp. Max. input signal before distortion: 1 V pp. Output signal level: 2.5 V pp Max. output level before distortion: 15 V ppSupply voltage: 18 VDCPCB size: 185x60mm



GRAPHIC EQUALISER 12V DC

A graphic equaliser with five bands over theaudio spectrum. A must for those who wishto listern to real hi-fi sound and want thebest frequency response with a minimum ofdistortion. Ideal for the car.Working voltage: 12V DCCurrent: 100mAAdjustment Frequencies: 60, 250, 1000,4000, 16000HzPCB size: 145x48mm


02.27


MONITOR AND EFFECTS FORAUDIO MIXER

Monitor mixer amplifier (mono). Parametricequaliser with controls for attenuation, centrefrequency and bandwidth to prevent micro-phone ’howl’. Effects mixer amplifier withoutput level control. Effect return control tomix the processed signal directly into themaster output, without using an additionalinput channel.Specifications:output level : 0.775 / 1.5 / 2.5Vrmscenter frequency : 100Hz to 10KHzQ-factor : 0.4 to 2.5attenuation : 0dB to 30dBPCB dimensions : 58 x 203mm


DAUL INPUT AMPLIFIERFOR AUDIO MIXER

Two input amplifiers, each may be built as :- Mono microphone input, symmetric orasymmetric- Mono line input, symmetric or asymmetric- Stereo line input- Stereo phone inputEach amplifier has one gain control (±25dB).Specifications:two stereo channelsgain adjustment : 25dBsignal to noise ratio : > 80dBtotal harmonic distortion : < 0.05%frequency response : 20Hz to 20KHz (0.5dB)RIAA correction : > 1dBPCB dimensions : 63 x 98mm


STEREO MIXER UNIT

It is possible to mix up 3 stereo signals andto adjust each channel separately. Eachstereo channel has been mounted at an ownprinted board. Therefore, it is possible to

mount them separated from each other in ahousing.Operating voltage: 6 to 12 VoltOutput: max. 3VFrequency: 20 to 20000 Hz



ACTIVE STEREO PRE-AMPLIFIERMODULE 8 TO 50VDC

This is a true hi-fi pre-amplifier module withthe following features:Stereo: separate left and right channelsBalance Range: greater than -40dBBass Filter: from 40dB cut to 20dB boostTreble Filter: from 15dB cut to 15dB boostSelectable filter contourProtected input and outputHigh gain, low noiseThe amplifier’s internal voltage is kept

constant by an on-board voltage regulator,therefore the amplifier’s performance is noteffected by varying supply voltage

Specifications:Supply Voltage: 8 - 35VdcVolume Range: -90 to +23dBInput Sensitivity: 100mV input for full outputMaximum Input Voltage: 2.5VrmsMaximum Output Voltage: 3VppFrequency Response: 10Hz - 100kHzDimensions: 160 x 50 x 25mm


STEREO PREAMPLIFIER ANDTONE CONTROL

This stereo preamplifier kit with tone controlmakes use of the Philips TDA1524A.It provides up to 20dB of voltage gain forboth channels, +/-15dB of bass and treblecontrol, left/right channel balance and selec-table loudness contour. It is able to drivemost power amplifiers.Specifications:Supply Voltage: 12V battery/15Vdc adaptorSupply Current: 50mA min.Input Voltage / Gain: 300mV / Gain = 20dB

3Vrms / Gain = 0dBOutput Voltage: 3VrmsInput Impedance: 10 kOhmOutput Impedance: 300 OhmFrequency Response -1dB: 10 - 50 000HzBass boost/cut: 15dB at 50 HzTreble boost/cut: 15dB at 15 kHzDimensions: of PCB is 67 x 114mm

assembled height: 25mmKIT ORDER CODE: AB114MANUFACTURED BY: DIY


STEREO TONE CONTROL

This stereo-tone-control may be connectedin front of the output-amplifier.Treble, bass, and volume are separatelyadjustable.Operating voltage: 9 - 18 volts.



KARAOKE

Features:Sing along with your favourite musichook-up the unit between your CD-player,MD-player or any other line-level source andyour amplifierRCA input and output socketsit has a 6.35mm microphone jack that fitsmost microphonesadjustable microphone level“vocal reduction”-switch reduces originalvocals on most stereo recordingson/off switch and LED power indicatorSpecifications:Power Supply: 9V battery (not included)Supply Current: 16mADimensions: 100 x 84 x 25mm


GUITAR TREMOLO 9V DC

This is a TREMOLO with professional speci-fications. It creates fantastic effects with anyelectric guitar. It has a variable tremolo fre-quency (1-12 Hz) and adjustable modulationlevel from 0 to 90 % which makes it veryversatile and suitable even for professionalguitarists. It operates off a 9V battery which,as the circuit has very low consumption willlast for a quite long time.Supply voltage: 9V DCInput sensitivity: 200mV

02.28

Consumption: 5mATremelo frequency: 1 - 20HzFrequency responce: 10Hz - 16KHzPCB size: 100x50mm



LIGHT EFFECTSFIXED LED

DECORATIVE SHAPES

TRAFFIC LIGHT

This kit is a miniature traffic light as used onfour-way junctions. It operates realisticallywith an adjustable delay. It uses 12 LEDs. Itis great for model railroads, exhibitions, as atoy, ... Specifications:Power Supply: 9V battery (not included)Supply Current: 22mAON/OFF switchDimensions: 50 x 35 x 115mm


HALLOWEEN PUMPKIN

Features:This kit uses 25 LEDs, bright-colouredpumpkin-shape, Halloween gadgetit has a random flash effect that simulates aflickering candlecontains 1 extra high intensity yellow LEDthat illuminates the pumpkinon/off switchSpecifications:Power Supply: 9V battery (not included)Supply Current: 20mADimensions: 100 x 80 x 33mm


FLASHING HEART

The kit flash 30 super-bright, red LEDs in avariety of different patterns. The patterns areread from a lookup table in a micro-con-troller. Electrically both circuits are the same;it is only the lookup table and the physicallayout of the LEDs which is different. Thesecircuits would be impossible using normalICs. Both circuits are used with permissionfrom the designer, Les grant. All source codeis provided.



FLASHING LED SWEETHEART

Show your love in an original way and alsothat your heart still beats faster for him orher. This kit uses 28 LEDs to form 2 blinkinghearts, one within another.Specifications:Power Supply: 9V battery (not included)Supply Current: 8mADimensions: 60 x 60 x 30mm


RIDING SANTA

Features:This kit is a 126 LED multicolour animatedXmas gadget. There is no need to removethe battery when using an external supply.Operating voltage of 12Vdc makes it possi-ble to use in cars, lorries, trucks. On/offswitch is included.Specifications:Power Supply: 9 to 12Vdc or 9V alkaline bat-tery (not included)Supply Current: 48mADimensions: 80 x 145mm


MANUFACTURED BY: VELLEMANMANUFACTURER CODE: MK116 /

MMK116

83 LED ANIMATED BELL

This kit is a multicolour bell. There is noneed to remove the battery when using anexternal supply. Operating Voltage of 12Vmakes it possible to use in cars, lorries,trucks. On/off switch is included.Specifications:Power Supply: 9 to 12Vdc or 9V alkaline bat-tery (not included)


FLASHING STAR 12V

The kit flashes 30 super-bright, red LEDs ina variety of different patterns. The patternsare read from a lookup table in a micro-con-troller. These circuits would be impossibleusing normal ICs. The circuits are used withpermission from the designer, Les Grant. Allsource code is provided.Power Supply: 12V



02.29

3D CHRISTMAS TREE

This kit is the ultimate Christmas gadget.Features:It uses 16 flashing red LEDscontains extra green and yellow LEDs pro-vided to customize your tree,it can be hung on and powered with wires.Specifications:Power Supply: 9V battery (not included)it will operate on 12VDC (e.g. in cars, ...)Supply Current: 8mADimensions: 80 x 88 x 102mm


CHRISTMAS TREE 9V

With 16 blinking LED’s. For decoration pur-poses.Dimensions: 10 x 7.5cmOperating voltage: 9VDC



DE LUXE CHRISTMAS TREE

Features:This kit makes a beautiful tree using 134LEDs. 18 randomly blinking candles. Thereis no need to remove the battery when usingan external supply. Operating Voltage of 12Vmakes it possible to use in cars, vans,trucks. On/off switch is included.Specifications:Power Supply: 9 to 12Vdc or 9V alkaline bat-tery (not included)Supply Current: 40mADimensions: 143 x 81mm



MMK117

ELECTRONIC CHRISTMAS TREE

Christmas was never before so cheerful!This kit really makes the difference. It uses16 blinking LEDs.Specifications:Power Supply: 9V battery (not included)Supply Current: max. 4mADimensions: 60 x 100 x 25mm

KIT ORDER CODE: EB858MODULE ORDER CODE: AB361


MMK100

FIXED LED DECORATIVESHAPES USING SURFACE

MOUNT DEVICES

SMD LED STICK-ON-FLASHER

Instructional construction set using SMD chipconstruction parts. Included you will find avery extensive and illustrated SMD introduc-tion. When the parts are successfully sol-dered to the PC board, the result will be astick-on pin with an atomium motive and aLED alternating blinker, built up with modernSMD parts.Operating voltage: 9 Volt Battery



SMD HAPPY FACE

Features:This is a miniature size decorative gadgetit uses 2 LEDs that flash alternatelycan be operated pending (cord supplied)great to attract attentionideal introduction to SMD (Surface MountedDevice) technologysome extra parts are supplied, in case someget lost or damagedHint: Use tweezers and a soldering iron witha fine tip (25W max.) and thin solder wire.Specifications:Power Supply: 3Vdc Lithium button cell (e.g.CR2025 or CR2032)Supply Current: 9mADimensions: Ø29 x 8mm


02.30

SMD FLASHING HEART

Features:This is a miniature size decorative gadgetit uses 6 LEDs that flash alternatelycan be operated pending (e.g. around theneck) or can be worn as a badge (pin sup-plied)great to attract attentionideal introduction to SMD (Surface MountedDevice) technologysome extra parts are supplied, in case someget lost or damagedHint: Use tweezers and a soldering iron witha fine tip (25W max.) and thin solder wire.Specifications:Power Supply: 3Vdc Lithium button cell (e.g.CR2025 or CR2032) (not included)Supply Current: 7mADimensions: 49 x 44 x 8mm


SMD CHRISTMAS TREE

Features:This is a miniature size decorative Christmasgadgetit uses 6 LEDs that flash alternatelytree can be operated pending (e.g. from theceiling or Xmas tree) or can be worn as abadge (pin supplied)great to attract attentionideal introduction to SMD (Surface MountedDevice) technologysome extra parts are supplied, in case someget lost or damagedHint: Use tweezers and a soldering iron witha fine tip (25W max.) and thin solder wire.Specifications:Power Supply: 3V Lithium button cell (e.g.CR2025 or CR2032)Supply Current: 5mADimensions: 45 x 41 x 8mm


SIMPLE LED FLASHERS

JUMBO LED FLASHER

Electronic flasher unit with a great 10 mmlight emitting diode. Ideal for decoration,models etc.Operating voltage: 6 to 12 VFlashing frequency: 120 to 240 times perminute



FLASHING LED 230VAC

A flash circuit with one red light emittingdiode Ø 5 mm which can be operated direct-ly at 230VAC. Flash frequency: 2 Hz.Usage: Control-lamp for devices and alarmsystems, start control for machines etc.



LED ALTERNATING FLASHER

This kit has one red and one yellow LED(light emitting diode) that flash alternately.The flashing rate is adjustable. It can beused to make a dummy alarm, for flashingadornments, display boards, etc.Specifications:Supply Voltage: 6 - 12VdcSupply Current: 20mA max. at 12VdcAdjustable Flashing Rate: 2.5 - 5HzDimensions: 24 x 26mm, 20mm height



FLASHING LEDS

This kit is useful for different applications(such as model construction), and recre-ational. Adjustable flashing speed with twopotentiometers.Specifications:Power Supply: 9V battery (not included)Supply Current: 8mADimensions: 30 x 35 x 15mm


TWO LED FLASHERUSING THE 555 IC

This kit makes use of the popular 555 IC. Inthis kit it is used as an astable oscillator togenerate a square wave. It has 2 LEDs con-nected, to pin 3 of the IC, in such a mannerthat one LED is always on while the other isoff. The two LEDs flash alternately. The dutycycle and rate of flashing is adjustable.Specifications:Supply Voltage: 5 - 15VdcPCB Dimensions: 28 x 34mm



LED FLASHER / 555 TESTER9-12 VDC

A useful project when you need a flasher likein alarm systems, warning devices, indica-tors, signaling, toys and more. The circuituses the well known 555 TIMER IC andbesides all its other applications it can beused as a tester for the 555 IC.Power supply: 9 to 12VDC / 30 mA



02.31

DUAL WHITE LED STROBOSCOPE

Features:It uses two super bright white LEDspowerful flash effectgreat for party’s, in scale models, to attractattention, to observe moving parts, etc...slow/fast selector switch and speed adjustingknobspeed is adjustable between approx. 1 and60 flashes/secondon/off switchSpecifications:Power Supply: 9V battery (not included)Supply Current: 40mA max.Dimensions: 55 x 32 x 40mm


DUAL SUPERBRIGHT FLASHINGRED LIGHTS

Features:This kit uses two super bright red LEDsvery powerful flash effectit may be used for emergencies, warningsigns, as an eye-catcher, ‘alarm-active’ -simulation, etc ...it can be set to turn on at dark withadjustable sensitivityon/off switchSpecifications:Power Supply: 9V battery (not included)(12V is possible)Dimensions: 55 x 32 x 40mm


INCANDESCENT LAMP FLASHERS

FLASHER 6 TO 12V 100MA

Electronic flasher unit for glow lamps 6 to12VDC maximum 100mA. Also suitable asalternating flasher.Flashing frequency: 1 to 3 times per second.Ideal for usage within miniature constructing!Together with the additional kit FB631 relaycard (not included in this kit) it is feasible tooperate flashers with loads up to 6 Amperecurrent consumption!


FLASHER 4.5 TO 12V

Electronic flasher unit for one or severalglow lamps. Adjustable flash period: approxi-mately 1 to 3 times per seconds. Usage: forminiature builders, as bicycle blinker, flash-ing brooch etc.Operating Voltage: 4.5 to 12 VoltMaximal current load: 100mA


ALTERNATING FLASHER FOR2 SMALL LAMPS

Flashes up 2 lamps or lamp groups alternat-ing (max 100mA 4.5 to 16V). Adjustableflash period. For miniature construction!


FLASHER FOR SMALL LAMPSMODULE 6 - 12VDC

It is possible to connect small glow lamps upto a max. current load of 300mA.

Suitable as flasher or alternating flasher.Specifications:Operating voltage: 6 - 12 VdcOperating mode: flasher or alternating flash-erOutput: 2 outputs each for max. 300mAFlash sequence:approx. 2 - 3Hz (120 - 180 per minute)Flashing / rest ratio: 50 : 50Dimensions: 18 x 15 x 12mm

(without fixing straps)MODULE ORDER CODE: GB768

FLASHER FOR 1A LAMPSMODULE 5 - 12VDC

Electronic flashing device for glow lamps upto max. 1A current load.Flash / rest ratio: 50 : 50Specifications:Operating voltage: 5 - 12Vdc

(depending on the connected lamp)max. Current of the lamp: 1AFlashing Rate: 2 - 4Hz

(120 - 240 flashes per minute)Dimensions: 25 x 22 x 17mm


LIGHT SWELLER 12VDCMODULE 24W MAX.

This light sweller regulates incandescentlamps (halogen lamps, too) slowly from"dark" to "light" and back again in continu-ously recurring succession. It is like a flash-er, apart from the fact that the lamps do notblink but slowly become light and dark.Swelling sequence: every 5 - 8 secondsSupply Voltage: 8 - 15Vdcmax. lamp Current: 2ADimensions: 60 x 45 x 20mm


LAMP POWER FLASHER12 VDC / 40WATT

A power flasher suitable for alarms, warningdevices, car hazard lights, signaling devicesand more. It uses a power transistor to drivethe lamp and solid state circuitry to providethe necessary pulses which turn the lamp on

02.32

and off.Supply voltage: 12VDCMax. current: 4AMax. Load: 50WFlash rate: 40-90 flashes p/minute


LIGHT PULSE DEVICE 230VAC

The kit is suitable as a flasher for alarm sys-tems or for disco units using 230V light bulbs(max. 880W). The flash rate is adjustablebetween approximately 0.5Hz up to 10Hz.Technical data:Supply voltage: 230VACLoad: Maximum 880W (4A)PCB size: 35x35mm


POWER BLINKER 230VAC

This blinking kit is designed for the activationand deactivation of 230Vac loads. It is ideallysuited for steering e.g. disco lights, safetysigns, light bulbs, low-voltage halogen light-ing with wirewound transformer, etc ...The on and the off durations can be adjustedseparately. The load can be resistive andslightly inductive.Specifications:Noise suppressed according to EN55015Power Supply: 240VacLoad Current: 3A max. fusedPower Output: 500W / 200VA max. 240VacAdjustable ON and OFF durations:

ON-time adjustable: 50ms and 2.5sOFF-time adjustable: 0.5s and 15s

Two Indicator LEDs for ON and OFF statesDimensions: 100 x 82 x 36mmModule Dimenions: 106 x 101 x 44.5mmWeight: 172g

KIT ORDER CODE: GC065MODULE ORDER CODE: GC114

MANUFACTURED BY: VELLEMAN

SLOW FLASHERMODULE 110/230VAC

This mains flasher has an adjustable flashingperiod: 0.6 - 9 seconds turn-on time.For electric light bulbs up to 300 W / 230VSpecifications:Supply Voltage: 110 - 240VacRupturing capacity: for electric light bulbs

110V up to max. 150W230V up to max. 300W

Minimum Power Load: 15WSafety Fuse: installed 1.6A slow-blowFlashing Period:

On-time: 0.6 - 9 seconds (djustable)Off-time: 50% of the on-time


FLASHER MODULE 230VAC

This is a 2-channel running light. This 2-channel running light can flash alternately 2lamps or lamp groups.Flashing Period: 0.5 - 1 secondSpecifications:Supply Voltage: 230 - 240VacChannels: 2Power Rating: max. 500W per channelFlashing Frequency: 1 - 2HzDimensions: 60 x 45 x 20mm


RUNNING LIGHTS

FIVE ULTRA BRIGHT LED FLASHER3 VDC

Five LEDs flash on and off in a randomsequence or sequential mode depending onwhether a switch is open or connected high.Continuous flashing mode or toggle on/off isselectable by another switch. The kit uses asmall chip on board PCB. A trimpot is usedto adjust the flashing rate. Motherboard sup-plied to mount all components.Power supply: 3VDC (battery holder includ-ed)Operating current: 10-16mAPCB size: 39x30mm


8 LED MULTI SEQUENCE FLASHER

This is a versatile LED or filament bulb flash-ing kit. It is designed to make use of aPIC16F84A microcontroller from Microchip.The microcontroller is preprogrammed andthe software can also be downloaded. Theuser can arrange the 8 LEDs in a patternthey want. The brightness of each LED con-tinually varies between fully on to fully off.Flashing appears to be random. There are 5switches used to select from up to 32effects. Supply Voltage: 9 - 12VdcOutputs: 8 x transistor open collector type

max. 0.5A / 45Vdc eachKIT ORDER CODE: AB138MANUFACTURED BY: DIY

FIVE LED MULTI SEQUENCEFLASHER (COB/PCB)

Five Ultra Bright LEDs flash in seven pat-terns. The modes can be cycled throughusing an on-board switch. When the desiredflashing pattern is found just leave the switchand the pattern will remain flashing as longas power goes to the board and the switchremains set. Flash rate can be adjusted.Power Supply: 3VDC (Battery holder includ-ed)PCB Size: 40x30mmCOB PCB: 30x15mm


LED RUNNING LIGHT

This kit uses 8 LEDs. Different LED runningeffects are selectable (PROG push button).Adjustable effect speed (SPEED potentiome-ter). Power stand-by push button (OFF pushbutton).Specifications:Power Supply: 9V battery (not included)Supply Current: 18mADimensions: 95 x 40mm

KIT ORDER CODE: FB667 MANUFACTURED BY: VELLEMAN

02.33

MINI TRAFFIC LIGHT

This is a mini traffic light kit. It has 3 LEDs:one green, one red and one yellow. Afterconnecting the power it takes a few secondsbefore the LEDs start flashing sequentially,one after the other. It is possible to connectup to 12 LEDs to the circuit using 4 of eachcolour. The additional LEDs are not included.Specifications:Supply Voltage: 4.5 - 6VdcSupply Current (using 3 LEDs): 350mA at 6VDimensions: 35 x 45mm, 25mm heightOptional: (not included)LEDs: Green 3 x (HB075), yellow 3 x(HB076), Red 3 x (HB074) together withResistors: 150 Ohm 9 x (DB046)


MINI RUNNING LIGHT 9 - 12VDC

This mini running light has 3 small light bulbsand the running velocity is adjustable. It isideal for model construction, indication platesetc. It requires a supply voltage between 9 -12VDC.


3-CHANNEL RUNNING LIGHT6 TO 24V

Adjustable running velocity, operating volt-age depends on the voltage of the lampsconnected. Each channel may be loadedmax. 3 Amps. The operating voltage of theboard depends on the lamps used in themounting. For example, when using a 12Vlamp, the running light should be operatedthrough 12V.


3-CHANNEL RUNNING LIGHT230VAC

The running speed is adjustable. Each chan-nel max. 500 Watt. It is possible to connectsingle-lamps, light strings, or lamp combina-tions. Usage: For light effects in discothe-ques, shops, etc.


4-CHANNEL RUNNING LIGHT230VAC + 12VDC

This digital 4-channel running light controls 4different lamp outputs one after another andin regular intervals, lighting up the corre-sponding lamps one after another. Thevelocity is adjustable. The device works withfullwave control.For 230VAC glow lamps, max. 100 Watt peroutputOperating Voltage: 12VDC and 230VAC


4-CHANNEL RUNNING LIGHTMODULE 230VAC

This running light makes 4 lamps or lampgroups light up one after the other at regularintervals and go out again. The runningspeed is adjustable: 20 - 200 cycles perminute. For incandescent bulbs up to 300watt maximum per channel (maximum totaloutput: 1200W).Depending on the connection, the modulemay be used for various applications:

For luminous advertising in shopwindows, for exhibition stands or lightwarning signs.

Specifications:Supply Voltage: 230 VacChannels: 4Power Load per channel: max. 300 WattRunnig speed: adjustableDimensions: 144 x 70 x 54mm


4-CHANNEL RUNNING LIGHT230VAC

This running light kit is the perfect addition toyour existing lighting system if you want tocreate the kind of effects used in a disco. Itmakes use of microprocessor technology.The speed of this module can be adjustedmanually. Each of the four outputs has aLED indicator.Specifications:Noise suppressed according to EN55015Power Supply: 240VacLoad Current: 2A max. fusedChannels: four 230Vac / 2A outputsMaximum Channel Output Power:

400W / 100VA max. 230Vac per channelFlashing Rate: 0.2 to 3 times / secondDimensions: 100 x 83 x 36mmModule Dimenions: 106 x 101 x 44.5mmWeight: 177g



4-CHANNEL MULTI-FUNCTIONRUNNING LIGHT 230VAC

This kit does more than an ordinary runninglight: it not only runs in both directions, but italso flashes with two groups of lamps (flip-flop) and with all the lamps at the same time.The four light effects follow each other auto-matically. This device can be synchronisedwith mains frequency or it can work asyn-chronously. The running speed is fixed insynchronous mode and it can be adjusted inasynchronous mode. Radio interference isonly suppressed in synchronous mode.Specifications:Supply Voltage: 220Vac4 Triac Outputs: max. 2A / 220Vac eachOutput Power: max. 400 Watt per outputDimensions: 110 x 85mm, 35mm height


ATOMIUM

An especially decorative device, 6 yellow

02.34

LED’s (electrons) rotate around one red LED(atomic nucleus) optically. Ideal as adorn-ment, identity disc, clothes-pin, etc.Operating Voltage: 9VDC


LED RUNNING LIGHT10 CHANNELS

Electronic running light with 10 light emittingdiodes. The running velocity of the kit isadjustable. For usage in decorations, warn-ing advices etc. Operating voltage: 9 to 12VDC


RUNNING LIGHT0.1A X 10 CHANNELS 12VDC

Adjustable running speed. You may connectsmall incandescent bulbs or light emittingdiodes (individually or in groups) up to a totaloutput of 100mA per channel. Ideal to usefor: Decorative illumination of paintings, toys,model systems (e.g. model airports for thelanding area lighting), etc.


10 CHANNEL RUNNING LIGHT9VDC + 230VAC

This digital 10-channel running light controls10 different lamp outputs one after anotherand in regular intervals, lighting up the corre-sponding lamps one after another. Thevelocity is adjustable. The device works withfullwave control.For 230VAC glow lamps, max. 100 Watt peroutputOperating Voltages: 9VDC and 230VAC


DISCO LIGHT EFFECTS

XENON TUBE FLASHER 6VDC

This Kit builds the circuit to trigger a highvoltage xenon flashtube using a 6 volt DCinput from a power supply. The flashrate isfixed but we explain how you can vary it bychanging resistor and / or capacitor values.


XENON TUBE FLASHER 12VDC

A 12V battery powered xenon tube flasher.The flash rate is adjusted by a trimpot. Thefrequency of the flash rate can be adjustedfrom about once every 2 seconds to about 4per second. The kit is useful for runners orcyclists to aid in their visibility. The step-uptransformer is supplied with the kit. Fullinstructions are provided.Power supply: 12VDC


DISCO STROBE LIGHT 230VAC

Flashlight-stroboscope with U-flash tube andlarge charging capacitor for bright flashes.The speed of the flashes is adjustableapproximately 1-10Hz. Ideal as light shows,discos or special effect photography.Supply voltage: 230VACPCB size: 60x62mm


DISCO / WARINING STROBE LIGHT220VAC

The best of all light effects, previously avail-able only as professional equipment for dis-cos, now available to amateur constructorsat a very reasonable price. A 200/240Vxenon flash tube exactly like those found onaircraft, signal beacons and discos is includ-ed. The flash tube is rated for 2 000 000flashes.Supply voltage: 220 VACStrobe frequency: 0.3 -3Hz

KIT ORDER CODE: SB021MANUFACTURED BY: DIY

STROBOSCOPE 220VAC

Flashing light effects for discos. Make yourown snapshots and "lightning" light effects. Ithas an adjustable flashing rate.Specifications:Supply Voltage: 220 - 240VacAdjustable Flashing Rate: 2 - 20 flash / sec.PCB Dimensions: 87 x 65mm


DUAL FUNCTION STROBE 220VAC

This high power, strobe light kit creates fan-tastic light effects for disco, photographics,signalling, etc... It has two operating modes.The first mode flashes the strobe on powerdown. It is ideal for using together with the

Light Computer kit (GC069) or with the kit4-Ch. Multi-function Running Light (GC068)

The second mode flashes continuously withadjustable flashing rate. Simple screw termi-nal power connections. High power, linear,Xenon flash tube. Power on LED. A reflectoris also supplied with this kit.Specifications:Supply Voltage: 230VacPower Consumption: 20W max.

3W on standbyFuse Protection: 20 x 5mm 250mA in holderMaximum Flashing Rate: 20 flashes per sec.Dimensions: 70 x 120mm, 50mm height


LASER SHOW 6VDC

With this laser show many different geomet-ric figures can be projected onto a wall bymeans of a laser. With the two controllersyou can regulate two reflecting motors viathe installed electronics so that many differ-ent figures can be shown. (Requires a lasermodule Code: FB110).Supply voltage: 6VDCMax. current: 0.3APCB size: 100x74mm

02.35


LIGHT COMPUTER

This is a light effects controller kit that hassixteen different programs and seven triacoutputs. This kit can be used for party light-ing, discotheques, advertisement lighting,signalling, etc. Each output is provided withan indicator LED to view the programsdirectly. The complete circuit can be installedso that the program selector, rotary switch,and all the indicator LEDs are mounted on afront panel. To enhance the spectacle fur-ther, an unlimited number of circuits can beconnected together to work synchronously.Two light computers can easily be cascadedto have a combined 14 outputs. Only useincandescent light bulbs with this kit. Thisdevice is not suitable for inductive loads.Specifications:Circuit Supply Voltage: 7.5 - 9Vac or 12VdcCircuit Supply Current: 250mANumber of Outputs: 7Supply Voltage for the Lights: 24 - 240VacCurrent per Output: 1.5A max.Number of Programs: 16Adjustable Speed: 1 - 15 steps per secondInput for external clock signal: 5VppDimensions: 134 x 79mm, 35mm height


10-CHANNEL LIGHT EFFECTGENERATOR 12VDC

This is a light effects generator kit. It has tendifferent pre-programmed light patterns toselect from. It has ten outputs that can beused to drive 12V light bulbs. It is ideal touse for advertisement lighting, party lightsand discos. There are two on-board push-button switches. One button is used forselecting different light patterns and theother button can simultaneously switch allthe outputs on or off. The speed of the dis-play can be adjusted with an on-board pre-set potentiometer. There is a LED indicatorfor each output.Specifications:Supply Voltage: 12VdcSupply Current: 4A max.10 Selectable Programs10 Outputs:

voltage per output: 12Vcurrent per output: 400mA max.

Dimensions: 100 x 140mm, 30mm heightKIT ORDER CODE: GC081


QUAD TRIAC SWITCH CARD

Relays are usually used to switch AC volt-ages by means of an electronic controlbecause of their simplicity. However, whenswitching occurs too frequently or too quicklythe life time of the relay contact points isshortened considerably. This can be solvedperfectly by replacing the relays with triacs.Using optocouplers for input isolation, theentire, low DC voltage, interface networkremains electrically isolated from the ACvoltage that has to be switched.Specifications:Supply Voltage: 9VdcSupply Current: 220mAFour Triac Outputs: 24 - 240VacOutput Current per Output: max. 1.5AFour Opto-isolated InputsFour Indicator LEDs: shine when triac is onInput Impedance: 820 OhmOne Input per Triac Output:

The ‘-’ input has to be pulled active low,(connected to the negative supply rail), toactivate the corresponding indicator LEDand triac when all ‘+’ inputs are 9 - 15VdcTriac is off if the input is not connected

Input Current: each input consumes 15mAwhen 15Vdc is connected across the‘+’ and ‘-’ input terminals of each input

Dimensions: 78 x 91mm, 25mm heightKIT ORDER CODE: GC059


LIGHT CONTROL SYSTEM-BASE UNIT

This is the base unit kit that is required tobuild your own domestic, modular, light con-trol system. It has PCB mounted socketsthat can connect up to five plug-in controllerunits. Only the following plug-in units can beused with this base unit kit:

“Multifunction Relay Module” kit (GC077),“Relay Output Module” kit (GC079),“Dimmer Module” kit (GC076),“Slow On-Off Dimmer” kit (GC080)

Each plug-in unit has three different inputs.This base unit has five inputs that can beconnected to open-collector transistor out-puts from controlling kits like:

“User-definable 8-Channel Touch Panel”kit (AB304),“10-Channel, 2-Wire Remote Control”kit (GC057),“15-Channel IR Receiver” kit (AB306),“PC Interface Board” kit (GB693)

There are five push-button switch inputs thatare optically isolated. The push-buttonswitches are not included. There are five on-

board, tactile, push-button switches. Low-voltage (24Vac) control circuit for extra safe-ty. Each plug-in socket is fused.Specifications:Supply Voltage:

for control circuit: 24Vacfor plug-in units: 110 - 240Vac

Supply Current: for control circuit: 300mAfor plug-in units: 2.5A fuse per plug-in unit

5 Separated plug-in unit channelsInput Current:

for the five inputs that can be connected toopen-collector outputs: 35mA per inputPush-button Control Current: 150mALED Indicators:

1 LED for 24Vac control circuit power1 LED for 230Vac mains power5 LEDs to indicate active control signals,one for each plug-in unit.

Dimensions: 107 x 160 x 70mmOptional:Transformer: 12-0-12V 0.5A 12VA, (QB074)Push-button Switches: 5 x (GB723)


MULTIFUNCTION RELAY MODULE

This is a programmable, multifunctional,230Vac timer kit with an output relay switch.This kit is a plug-in unit for the Light ControlSystem - Base Unit kit (GC075). It makesuse of a preprogrammed microcontroller.Two pre-programmed delays and learningmode for delay times.The microcontrollerhas EEPROM data storage to prevent mem-ory loss if the power is removed. Functionsare selected with 4 on-board DIP-switches.This kit has 14 different functions thatinclude timing, switching, flashing, interval,random switching... On-board transient filterfor relay contacts or load (selectable). It issuitable for controlling incandescent lighting,halogen lighting, fluorescent lighting, fans,valves, buzzers... This kit is also available asa stand-alone version with screw terminals:(GC102).Specifications:Supply Voltage:

110 - 125Vac or 220 - 240Vac 50 / 60HzMaximum Output Current: 2.5A2 Delay Times: each programmable for

2 sec. up to 12 daysOutput Relay: 2.5A / 220Vac contact ratingTransient Filter for the relay contactsDimensions: 65 x 57, 30mm height


02.36

RELAY OUTPUT MODULE

This is a 230Vac relay output switch that issuited for both resistive and inductive outputloads. This kit is a plug-in unit for the LightControl System - Base Unit kit (GC075). Ifthis kit is used as a stand-alone unit then itcan be activated by an external push-buttonswitch or an open-collector output from acontrolling circuit. This kit has a transientsuppressor to reduce sparking across therelay contacts.Specifications:Supply Voltage: 110 - 240Vac 50 / 60HzMaximum Output Current: 2.5A / 220VacTransient Filter for the relay contactsLED Indicator: shines while relay is poweredDimensions: 65 x 57, 30mm height


DIMMER MODULE

This is a 230Vac light dimmer kit. This kit isa plug-in unit for the Light Control System -Base Unit kit (GC075). This kit is used forincreasing and decreasing the brightness ofmains power light sources. A brief push of asingle push-button (not included) toggles thelight on or off, while continually pushing it willstart the dimming function. The dimmer hasa non volatile memory that saves the lastlight level setting before being switched off. Ithas a soft start and automatic turn-off func-tion that extends the life of the bulbs andsaves energy. It can be used for low voltage(12V) halogen lighting only if it is usedtogether with a suitable wire-wound 230 to12V step-down transformer.Specifications:Supply Voltage:

110 - 125Vac or 220 - 240Vac 50 / 60HzMaximum Output Current: 2.5AMaximum Output Power:

170W at 115Vac or 350W at 230VacTransient Suppressor: used to avoid radio /

TV interference according to EN55015Maximum Phase Shift: 30 degrees

(when powering inductive loads at output)Dimming Speed: approximately 5 secondsAutomatic Turn-off Time: 12 hoursDimensions: 65 x 57, 25mm height


SLOW ON-OFF DIMMER

This is a dual mode, 230Vac light dimmer kit.This kit is a plug-in unit for the Light ControlSystem - Base Unit kit (GC075). It makesuse of a preprogrammed microcontroller. Ithas two pre-programmed delay times and alearning mode for independently changingthe delay times. The microcontroller hasEEPROM data storage to prevent memoryloss if the power is removed. Modes areselected with 2 on-board DIP-switches.Mode 1:This mode simulates a ‘regular’ dimmer. Thelight level is slowly increased from off to fullyon during the first time delay. The dimmingdirection is changed every time the push-button switch (not included) is pressed. Afterthe button has been pressed the secondtime delay starts and the light level slowlydecreases until the light is off at the end ofthis delay. The light level can also be setmanually and saved.Mode 2:The light switches fully on after the buttonhas been pressed and stays on for the dura-tion of the first time delay. The second timedelay starts immediately after the first timedelay has ended. The light level starts todecrease, at the start of the second timedelay, until the light is off at the end of thisdelay. This kit has a soft start function thatextends the life of the bulbs. It is not suitablefor low voltage halogen lighting or electrictransformers.Specifications:Supply Voltage:

110 - 125Vac or 220 - 240Vac 50 / 60HzMaximum Output Current: 1.3AMaximum Output Power:

150W at 120Vac or 300W at 230VacNoise is suppressor according to EN550152 Delay Times: each programmable for

1 sec. up to 1 hourDimensions: 67 x 57, 25mm height


WHITE LED FLASHLIGHT

Features:This kit makes use of white LED technologyit uses 2 high-power LEDs (4500mcd)estimated LED life: > 100.000 hours (morethan 11 years at a stretch!)low power consumptioncan run up to 10 hours on a single battery(test conditions: 15s ON, 60s OFF continu-ous for 7 hours/day)automatic battery management for efficientuse of battery powerbuilt-in strobe effect for emergencies, can beused to attract attention, ...Specifications:Power Supply: 12V battery e.g. (DB247)(battery not included)Dimensions: 60 x 40 x 14mmWeight: 31g (with battery)

KIT ORDER CODE: GB611 MANUFACTURED BY: VELLEMAN

SOUND TO LIGHTMODULATORS

LOW VOLTAGE LIGHT ORGAN

This kit operates at safe voltage level (notmains voltage). It makes lamps flash to therhythm of the music. Usable for halogenbulbs. It receives its input signal (opticallyisolated) directly from a speaker. Adjustablesensitivity. Can be used in the car, if thelamps are isolated from the chassis.Specifications:Input Sensitivity: 2W to 60WPower Supply: 12V to 24V DC or ACmax. load: 50W / 12V or 100W / 24VDimensions: 45 x 88mm


SIMPLE 1 CHANNEL LIGHT ORGAN

This kit receives its input from a loudspeak-er. It modulates a lamp according to themusic signal at the input. The input is opti-cally isolated from the loudspeaker.Adjustable sensitivity.Specifications:Input Sensitivity: 2W to 60Wmax. load: 120W at 120Vac and 230W at230VacDimensions: 60 x 41mm


02.37

MUSIC TO LIGHT WITHOPTO-COUPLER 230VAC

A music-to-light modulator is a circuit whichcontrols the intensity of one or more lights inresponse to an audio input. The kit is ideal togive the rhythm to any party or disco withoutmuch money. It uses an opto-coupler as acoupling device between the audio and themains controlling stages of the circuit.Operating voltage: 230 VACPower handling: up to 250 WattsInput sensitivity: 2-60 Watts


SOUND-TO-LIGHT UNIT

This kit, which uses four high-intensity LEDsand a microphone, lights up and reactssimultaneously on every sound. It may beused for different funny and practical applica-tions, such as: sound indicator, simplesound-to-light unit for music, for the hearingimpaired: can be used to indicate the tele-phone, doorbell. Input sensitivity isadjustable with a potentiometer.Specifications:Power Supply: 9V battery (not included)Supply Current: max. 12mADimensions: 40 x 55 x 35mm


MUSIC TO LIGHT FOR THE CAR12VDC

Bring something of the atmosphere of adisco in your car with this fascinating lighteffect. The circuit has three different chan-

nels with 6 LEDs each that will respond todifferent frequencies to create a beautifullight effect. Add colour to your car’s interiorwith this easy to build project.Power supply: 12VDC / 20mA


3 CHANNEL MUSIC TO HALOGENLAMPS 12VAC

With this light organ it is possible to connect12V halogen lamps up to a maximum of 300Watt (100W per channel). Each channel isindependently adjustable. To be used only ata 12V-transformer (alternating voltage), notfor DC-voltage.


MUSIC TO LIGHT MODULE3 CHANNEL 230VAC

This 3 channel music to light module hasthree pre-fixed channels. The module cre-ates a special play of light full of life. Thecontroller is also programmed with alternat-ing effects. It has to be wired to a speakeroutput.This device requires an additional2Watt, wire-wound potentiometer 100 - 250Ohm (not included)Power supply: 230 VACPower Rating: max. 1500W (500W/230Vacper channel)

MODULE ORDER CODE: AA316MANUFACTURED BY: KEMO

MUSIC TO LIGHT 3 CHANNELWIRELESS 12VDC + 230VAC

A music to light kit with mircophone pick-up,therefore there is no need of connection toan amplifier. Each channel is individualyadjustable. Can handle a maximum of1000W / 230Vac per channel.Supply voltage: 12VDC and 230V for thelight bulbs.PCB size: 66x60mm


3-CHANNEL LIGHT ORGAN

This is a 3-channel music to light kit with astylish enclosure. The three channels are forthe low-, mid- and high-frequency ranges ofmusic. It receives sound waves with a built-in microphone. You can adjust the micro-phone sensitivity with the master level con-trol knob. The output level for each channelcan be adjusted independently of each other.This device is only suited for incandescentlight bulbs.Specifications:Supply Voltage: 220 - 240VacMaximum Power Output per Channel: 200WNoise suppressed according to EN55015LED Indication: 1 power-on LED

3 testing LEDs, one for each channelDimensions: 155 x 160mm, 45mm heightNot Included:1 power plug for 230Vac (AA280)3 European 2-pin AC plugs: 3 x (GB830)3 lights from (AA977, AA978, AA979, AA980)3 lampholders: 3 x (EB276)power cable (AA498) length as you require


MUSIC TO LIGHT 4 CHANNELWIRELESS 230VAC

A four channel music to light modulator thatcan be used with any sound source, as itrequires no electrical connection with theamplifier. The kit includes a microphone thatis used to pick up the sound waves. Eachchannel has a separate sensitivity control. Itis ideal for parties and discos.Specifications:Power Supply: 230VacOutput Power: 4 x 300W max.Channel Frequencies:500Hz, 1kHz, 5kHz and 10kHzPCB size 114 x 39 mm

KIT ORDER CODE: AA760MANUFACTURED BY: ELECTRONICS123

02.38

MUSIC TO LIGHT 6 CHANNEL230VAC (MONO OR STEREO)

Each channel can be adjusted separately. Itis feasible not to connect lamps of more than500 Watt per channel. Extremely high inputsensitivity. Ideal for discos.Supply voltage: 230VACTotal load: 3000WPCB size: 70x100mm


AUDIO SIGNALLEVEL INDICATORS

POCKET VU METER

Surprise your friends in the disco. 5 LEDsmove to the rhythm of the music. This kituses 5 bright, red LEDs and a microphone.Adjustable input sensitivity.Specifications:Power Supply: 3V disk type CR2032 battery

(AB018) (not included)Supply Current: 10mA maximum

KIT ORDER CODE: EB524MANUFACTURED BY: VELLEMAN

POCKET VU METERBUILT INTO ENCLOSURE

This is a pocket-sized VU-meter kit. Thepocket VU-meter, (EB524), has been so suc-cessful that this version of the kit was madewith an attractive enclosure.Specifications:Power Supply: 3V disk type CR2032 battery

(AB018) (not included)

On / Off slide switchBuilt-in Microphone: senses audible soundVolume Indication: 5 LEDs light up sequen-tially (bar display) with increased volumeDesigner Enclosure: is supplied with an

adjustable sensitivity knobDimensions: 87 x 50 x 25mm


LED-RECORDINGLEVEL INDICATOR 12VDC

An almost inertia-free measuring instrumentwith a 5-LED indicators. Perfect as a record-ing level indicator for amplifiers or loud-speaker enclosures. The kit is also suitablefor use as a volt or ampmeter.Technical data:Supply voltage: 12VDCIndication: 5 LEDsPCB size: 44x23mm


LED-VU-METER-11 LED’S

This is an 11-LED, voltage level indicator kitthat is almost linear. It accepts DC and ACinput voltages. The left-most, green LED, iscontinually lit while this device is powered.The remaining 10 LEDs indicate the inputlevel in bar graph style. Minimum level isindicated at the second green LED and max-imum level at the last red LED. The inputsensitivity can be adjusted.Specifications:Supply Voltage: 12VdcSupply Current: 70mA max.Input Impedance: 22k OhmInput Voltage Range at Maximum Sensitivity:

0 to 1.5Vdc max. (all LEDs on at 1.5V)Dimensions: 46 x 92mm, 15mm height


LED-VU-METER 30 LED’S

This is a 30-LED, voltage level indicator kitthat is almost linear. It accepts DC and ACinput voltages. The LED, at the bottom-left,is lit when the input is grounded, (connected

to 0V), or disconnected. As the input level isincreased the LEDs light up sequentially,only one LED is on at a time, in a clock wisedirection. The maximum level is indicated bythe bottom-right LED. The input level is dis-played in “dot mode”. The input sensitivitycan be adjusted.Specifications:Supply Voltage: 8 -16VdcSupply Current: 25mA max.30 Green LEDsInput Impedance: 25k OhmMaximum Input Voltage: 50VdcInput Voltage Range at Maximum Sensitivity:

0 to 9Vdc max. with 12Vdc supply voltageDimensions: 93 x 93mm, 20mm height


DUAL STEREO VU METER

If all inputs of the mixer panel are to beviewed or pre-adjusted, then this is indispen-sable. This module contains 2 stereo VUmeters with 2 x 5 LED indicators and can beused with the 6 or 12 channel mixing panel.May also be used with other equipment, toindicate the output level of an amplifier. Specifications:indication : -13, -8, -3, 0, +3dBsensitivity : 0dB = 0.775Vrms (easilyadjustable)supply voltage : 14 - 18VDC / 62mAPCB dimensions : 28 x 98mm

KIT ORDER CODE: FB692MANUFACTURED BY: VELLEMAN

MONO VU-METER 10 LEDS

VU meter with a audio power level scaleconsisting of 10 LEDs. It has adjustableinput sensitivity. Dot or bar display. Suppliedwith 1 front panel suitable for horizontal orvertical mounting.Specifications:Supply Voltage: 10 - 15VdcSupply Current: 110mA max.Scale: -20, -10, -7, -5, -3, -1, 0, 1, 2, 3dBFrequency Range: 20Hz - 30kHzInput Sensitivity: (select only 1 of 2 inputs)

Low Input: 150mV to 6Vrms with47 kOhm input impedance for LINE levelsHigh Input: 1.5V to 60Vrms with470 kOhm input impedance

PCB Dimensions: 37 x 68mmKIT ORDER CODE: GC019


02.39

STEREO VU-METER 2 X 10 LEDS

Stereo VU meter with two audio power levelscales with 10 LEDs each. It has adjustableinput sensitivity. Dot or bar display. Suppliedwith 1 front panel suitable for horizontal orvertical mounting.Specifications:Supply Voltage: 10 - 15VdcSupply Current: 250mA max.Scale: -20, -10, -7, -5, -3, -1, 0, 1, 2, 3dBFrequency Range: 20Hz - 30kHzInput Sensitivity: (select only 1 of 2 inputs)




STEREO LED POWER DISPLAYMODULE 5 TO 20 VDC

This colourful, stereo indicator can give anaccurate display of the amplifiers outputpower once calibrated. It will enhance theamplifiers appearance or look good mountedinto the dashboard of your car. The unitsinputs are directly connected across thespeaker outputs of the amplifier. Inputs canbe connected in parallel for mono amplifiers.A separate DC supply powers this unit. It hasno effect on amplifier performance. Thepower range (sensitivity) is adjustable. Red,yellow and green LED display. Specifications:Single Supply Voltage: 5 to 20VdcSupply current: max. 250mAAudio Power Range: 25 to 150 WattsLoad Impedance: 4 - 16 OhmsDimensions: 70 x 50 x 20mm


STEREO VU-METER 2 X10 LEDS

A simple, low cost stereo VU meter. TwoLM3915 dot/bar display driver ICs are usedto drive 2 rows of 10 LEDs (14 green, 6 red)in a moving bar display. Each row of LEDsspans a power range of 0-30 dB in ten 3-dBsteps. This VU meter indicates “peak musicpower” when used with audio amplifiers.Ideal add-on for any of the amplifier kits.Dimensions: 65mm x 42mm.


PRECISION STEREO VU METER2 X 15 LEDS

Stereo VU meter with two audio power levelscales with 15 LEDs each. It has adjustableinput sensitivity. Dot or bar display. Suppliedwith 1 front panel suitable for horizontal orvertical mounting.Specifications:Supply Voltage: 12 - 15VdcSupply Current: 300mA max.Scale: -23, -13, -10, -8, -6 and

-4, -3, -2, -1, 0, 1, 2, 3, 4, 5dBAccuracy: ± 0.5dB (at 1kHz)LEDs: 10 green, 2 yellow, 3 red per channelFrequency Range (-3dB): 20Hz - 30kHzInput Sensitivity: (select only 1 of 2 inputs)




MONO AUDIO POWER METER

This audio power meter kit has a 10 levelLED scale and can measure up to

2000Wrms. It does not require a specialpower supply as it is powered directly by thespeaker output. Ideal for use with car audiosystems and PA systems. Also usable forbridged amplifiers. A front panel and fourattractive front scale stickers are suppliedwith the kit.Specifications:Selection of 4 different scales:1) 4 Ohm load in Low Power Mode:

0.3 to 400Wrms2) 4 Ohm load in High Power Mode:

10 to 2000Wrms3) 8 Ohm load in Low Power Mode:

0.15 to 200Wrms4) 8 Ohm load in High Power Mode:

5 to 1000WrmsMinimum Input Voltage: 1.1Vrms (in Low

Power Mode)Maximum Input Voltage: 130Vpeak (in High

Power Mode)Current Consumption: 25mA at full scaleLuminous Intensity of LED: 8 to 20mcdDimensions: 120 x 40 x 28mm


STEREO LED-VOLUME INDICATOR

Almost inertialess volume indicator for ampli-fier units from 2 to 100 Watt. Indication isrealised through 22 LED’s (2 x 11 LED).Easy connection with the loudspeakers. Operating voltage: 12 V


FIXED MESSAGELED DISPLAYS

20CM LED DISPLAY“COMMON ANODE”

This kit makes a single digit, 7-segment LEDdisplay. It consists of 12 LEDs per segmentand 4 LEDs for the decimal point. There are8 inputs with a common ground (0V) connec-tion. Each input has to be pulled high, rela-tive to ground, to activate the correspondingsegment.Specifications:Supply Voltage: 22 - 26Vdc (non-regulated)Current per Segment: (static) 40mA

(multiplexed): 75mATotal Current in static mode: 400mA max.

02.40



20CM LED DISPLAY“COMMON CATHODE”

This kit makes a single digit, 7-segment LEDdisplay. This kit has the same specificationsas (GC084) except that this kit is a commoncathode display.


LUMINOUS LETTERS

With this kit it is made possible to mount anycapital letter of the alphabet or any digit from0 to 9. The concrete description of each let-ter and of each digit has been enclosed. Thekit includes especially bright LED’s. Theprinted wiring board could be equipped alsowith LED’s of any other colour. With each kitit is feasible to mount any digit and puttingseveral kits together, you are capable tobuild luminous nameplates, signboards,house numbers etc.Operating voltage: 12VCurrent consumption: 100 to 300 mA,depending on the digitDimensions: 90x65 mm


LUMINOUS LETTER CONTROL

The device switches luminous letters or lampgroups slowly one after another on, keeps allletters switched on for a while and switchesoff all letters at the same moment. Then, theprocess starts again. There are 4 connectingoutputs at which in each case either 1 letteror one letter group could be connected (witha lot of letters or with a whole text). The con-necting velocity is ajustable. The control isespecially suitable to be used with our LED-

luminous letters Kit FB634. Operating voltage: 12 to 15 VConnecting outputs: 4, each max. 5 A


ADVERTISEMENT LED DISPLAYWITH RED LEDS

Create your own message for personaladvertisements. The kit includes 12 selfdefinable characters, which are made by thecustomer. 150 bright LEDs are supplied withthe kit. Many spectacular light effects on themessage (scrolling, blinking, rolling, panningetc). Adjustable effect speed. Vertical or hori-zontal position possible. Fixed displaying ispossible (no effects). Different displays canbe synchronized, to create longer messagesor to create giant advertisements.Pleasenote that this display is not programmable.Specifications:Supply Voltage: 12 to 28VdcSupply Current: 760mA150 Bright Red LEDs: 60 - 80mcd max.Number of Characters: 125 x 7 LED matrix for each of the charactersOscillator output for synchronisation with

other display(s) (master / slave configu-ration)

Optional:Housing for this display (AB331)Spare 50 red LEDs for this display (GC074)PCB size: 80 x 473mm


ADVERTISEMENT LED DISPLAYWITH GREEN LEDS

This is an advertisement LED display kit with12 self definable characters. This kit has thesame specifications as (EB849) except thatits LEDs have a green colour instead of red.Optional:Housing for this display (AB331)Spare 50 green LEDs for display (GC073)


HOUSING FOR ADVERTISEMENTLED DISPLAY EB849 AND GC072

This enclosure is specially made for theAdvertisement LED Display kits (EB849) and(GC072). The picture is meant to show whatthe assembled kit, (EB849) or (GC072),mounted inside this enclosure will look like.Please note that this is only the empty enclo-sure and there are no LEDs or electronicssold with it.Dimensions:Length: 482mmWidth: 85mmHeight: 25mm


VARIABLE MESSAGEDISPLAYS

LCD MINI MESSAGE BOARD

Features:This kit is a miniature message board mak-ing use of a 16 character 1 line LCD displaya message scrolls across from right to leftwith adjustable speedapplications: at exhibitions, for advertising, togreet visitors at the front door, as name tag,...46 character message memoryit enables you to add pauses during scrollingSpecifications:Power Supply: 2 x AAA 1.5V cells,Dimensions: 100 x 38 x 32mm

KIT ORDER CODE: GB605MANUFACTURED BY: VELLEMAN

LCD MINI MESSAGE BOARD WITHBACKLIGHT AND ENCLOSURE

Features:This kit is a miniature message board mak-ing use of a 16 character 1 line LCD display.The LCD has a backlight. The enclosure issupplied. A message scrolls across withadjustable speed. It has a built-in messageeditor. You can add scrolling pauses into themessage. Applications: use at exhibitions, foradvertising, to greet visitors at the front door,as name tag, ...Specifications:Power Supply: 9VdcSupply Current: 100mAMessage Memory: 124 character EEPROMRS232-programming Mode: connect 2 wires

between a computer and the kit’s built-inRS232 interface. You can use this mode totype in your message via a Visual Basicprogram that can be downloaded:

http://www.velleman.beVelleman Product Code: MK158Dimensions: 115 x 43 x 75mm


PROGRAMMABLEMESSAGE BOARD

This is a programmable message board kit.

02.41

It makes use of a 16 character, 1 line, backlitLCD. Messages can be transferred from acomputer via its RS232 port. Message trans-fer software can be downloaded from:http://www.velleman.beVelleman Order Code: K8045You can replace up to 9 indicators or lampswith this kit. Up to 9 sixteen-character mes-sages are stored in non-volatile memory(EEPROM). Messages can be recalled bypressing a push-button switch. It also has 8inputs. It has 4 operating modes:1) Simultaneously display status of all inputs2) Display all active inputs3) Display the active input that has the high-est priority4) Display text messages in a ‘tickertape’-fashionA default message can be displayed to showthat no inputs are active.Specifications:Supply Voltage: 9-0-9Vac (AA749) (not incl.)

or 9 - 12VdcSupply Current: 150mAInputs: 8 inputs accept logic levels, and can

be connected to open-collector outputsInput Voltage Range: 24V max.Display: supertwist 16 char., 1 line, backlitCommunication: RS232 serial, 2400/N/8/1,

no handshakingOptional: (not included)For a RF wireless link you require:1 Transmitter Module (AB341) together with1 Receiver Module (AB342)Dimensions: 73 x 124mm, 30mm height


JUMBO 1-DIGIT CLOCK

This is a very unique 1-digit time display kit.It displays the following digits successively:first the ‘10-hour’ unit followed bythe hour unit,the ‘10-minute’ unit andlast the minute unitfor example: time 12:57 ‘1’, ‘2’, ‘h’, ‘5’, ‘7’Features:Gadget ClockTime is displayed as a sequence of digitsBright, red, 57mm height 7-segment displayEnclosure is also supplied with the kitSingle button operationDisplay-blank function to save powerSpecifications:Supply Voltage: 9 - 12VdcSupply Current: 150mA max.Display: 12 hour system

1 digit displays time digits sequentiallyAccuracy: 30ppmOuter Dimensions: 74 x 59 x 32mm


THE BIG PIC CLOCK

This digital clock kit makes use of aPIC16F84 microcontroller. Large 41 x 57mm,hi-efficiency, red 7-segment digits are usedto display hours and minutes, while smaller10 x 14mm digits display the seconds. It canbe set for either 12 or 24 hour display for-mat. The circuit has a dimming feature thatdecreases the display brightness in the dark.The clock may be adjusted for long-termaccuracy. Commented source code is avail-able on the Internet.Specifications:Dimensions: 2 x PCBs of 235 x77mm

assembled total height: 33mmSupply Voltage: 12VdcSupply Current: 1A max.Note that the following is not included:Space is provided for backup batteries:4 x AA NiCd cells: 4 x (JB039) and4 x single AA battery holders: 4 x (EB893)


MULTIFUNCTIONAL CLOCK /DISPLAY WITH RF

6 x 36mm high digits. Time, Date & tempera-ture indication, selectable with toggle option.1 sec. resolution chronometer with lap func-tion. Count down function to a specific date,the last day H:M:S are displayed.Scoreboard function (two players or teams,count up to 199). Random generator from 00to 99. 2 digit dice. Count function. Chimebeep option. Relay output for temperaturecontrol or time alarm. US or Europe displayoption for time, date, degrees Celsius orFahrenheit format. All functions and settingsare wireless remote controlled. Specifications:Power supply : 12VDC/300mAFixed 433.92MHz transmitter frequency, asrequired by lawKeychain remote control includedTemperature indication : from -20 to +70°C(resolution 1°)Temperature indication : from 0 to +150°C(resolution 2°)Memory backup option : 9V batteryRelay output : 1A / 24V max.PCB dimensions : 255x80mm


DIGITAL LED CLOCK

This is a digital, 7-segment, red LED displayClock kit. An attractive enclosure is supplied

with the kit. The time base is selected:internal or mains-frequency (50/60Hz) con-trolled. The internal time base can be fine-tuned with the adjustable capacitor. The timewill be displayed for a couple of secondsafter the button was briefly pushed during apower failure.Specifications:Power Supply: 9Vac or 9Vdc recommended

adaptor: (GB836) (not included)Backup Batteries: 3 x AA 1.5V cells:

(AB748) (not included)Time Display Selection: 12h- or 24h-modeDimensions: 92mm width, 45mm depth,

101mm heightKIT ORDER CODE: AB296


ROLLING CLOCK

This kit makes a nicely animated rolling timeand date display. Graphic display with 35LEDs. Select hours, minutes, month or daywith SELECT and enter the values with SET.Time display in 12h-mode (24h-mode whensetting clock). Fine-tune the clock by turningCV1.Specifications:Power Supply: 9 - 12VdcSupply Current: 20mA maxBackup Battery: 9V block type 6LR61 / 6F22Dimensions: 46/89 x 67mm

KIT ORDER CODE: EB847 MANUFACTURED BY: VELLEMAN

ROLLING MESSAGE

Create your own moving message. This kituses a 35-LED graphic display. The mes-sage can be up to 16 characters long.Adjustable scrolling speed. Press “SET” tochange a particular character. Press the upor down-key to select a character and endwith the “<”-sign. Display standby function:press “Stby” (press RUN to restart).Specifications:Power Supply: 9 - 12VdcSupply Current: 20mA max. / 4mA standbyBackup Battery: 9V block type (6LR61/6F22)Dimensions: 46/89 x 67mm


02.42

MAGIC MESSAGE

Features:Amaze your friends: wave the wand to makethe message appearthe message seems to be floating in the air...lots of built-in messages and also gives youthe ability to enter your own 7-charactermessageapplications: novelty gadget, in emergencies,at concerts or TV-shows, to welcome people,etc...it has excellent visibility due to the use ofhigh intensity red LEDslow power consumption

auto power-offSpecifications:Power Supply: 2 x AAA batteries (not includ-ed)Dimensions: 160 x 26 x 24mm


5 IN 1 EMERGENCY TOOL

Features:This kit makes use of microprocessor tech-nologyfunctions include: flashlight, emergencyflasher, SOS Morse code flasher, SOS mes-sage wand and lighting distance meterapplications: camping, biking, hiking, boat-ing, in the car, etc...attractive enclosure with belt cliplow power consumptionSpecifications:Power Supply: 2 x 1.5V AAA batteries (notincluded)Dimensions: 160 x 26 x 24mm


DIGITAL 7-SEGMENT PANEL METERS

LED DIGITAL VOLTMETER

This is an electronic, DC (direct current), dig-ital voltmeter kit. It has a 3-digit, 7-segment,green LED, digital display. The measuringrange may be extended up to max. 750V bymeans of a prevoltage divider that is notsupplied. It is possible to mount the LEDindication unit separately from the display’sdriving electronics. The measuring input andpower supply have a common, “-”, groundconnection.Specifications:Supply Voltage: 4.5 to 5.5VdcSupply Current: 200mA max.Voltage Measuring Range: 0 to +999mVdcPrecision: max. 0.1%LED Character Height: 13 mmDimensions: 70 x 70mm, 14mm height


LED 3 1/2 DIGIT PANEL METER5VDC

Make this general design 3 1/2 digit LEDpanel meter into your own voltage or currentmeter. Or customize it to measure input froma transducer. Two PCBs allow low-profileend-on viewing. All instructions to assembleand operate meter are included. Meter candirectly input an offset voltage, for examplefrom a weighbridge, use non-standard volt-age inputs, measure current or high volt-ages.Power supply: 5VDC


DIGITAL PANEL METER

This panel voltage meter kit is a goodreplacement for the traditional, moving-coiltype, analogue instrument. It has good accu-racy and stability. As it is very compact, thisunit can be built into all kinds of housings oreven into existing equipment.Specifications:Supply Voltage: 5VdcSupply Current: 250mAMinimum Voltage Displayed: -99mVdcMaximum Voltage Displayed: +999mVdcOut-of-range Indication: positive / negativeVoltage Resolution: 1mVInput Impedance: 100M OhmPCB Dimensions: 33 x 65mmHints: Use a 100 Ohm resistor for Rx.


GENERAL 3 1/2 DIGIT PANELMETER (7106)

Make this general purpose 3 1/2 digit LCDpanel meter into your own voltage or currentmeter or custom-make it to measure voltageinput from a transducer. Full details aregiven in the documentation. Uses the verypopular 7106 IC. The LCD section of thePCB may be cut off and mounted separately.


3 1/2 DIGIT LCD PANEL METER

The 7106 contains in it all the active circuitryfor a 3 1/2 digit panel meter (DPM) in a sin-gle chip. It was designed to interface directlyto a liquid crystal display (LCD). Voltage is

02.43

the most frequently measured electricalquantity. In temperature meters, currentmeters, wind speed meters and resistancemeters what is actually being measured isvoltage, or more correctly, the potential dif-ference between two points. With a few addi-tional external passive components the 7106chip may be made into an easy to use meterfor any of these purposes especially multiplerange digital volt meters.


LCD PANEL METER

This is a 3 ½ digit, LCD, (liquid crystal dis-play), panel voltage meter kit. It is a lot easi-er to read and much more precise than itsanalogue equivalent. It is compact and andeasy to use. It can easily be used with asensor or adapter circuit that gives a voltageoutput.Specifications:Supply Voltage: 8 - 15Vdc or a 9V batterySupply Current: 60mA max.Display: 3 ½ digit LCDSelectable Voltage Measuring Ranges:

-200mVdc to +200mVdc or-2Vdc to +2Vdc



3-DIGIT LED COUNTER

PB300

This kit is an up counter with a 3 digit LED-display. It has two push-button switches:COUNT and RESET. Both buttons aredebounced to enable accurate counting andreliable reset. There is an input for latchingthe currently displayed count value. There isa carry output that enables one to connecttogether two or more counters to make a sixor nine digit display counter.Specifications:Supply Voltage: 6 - 9VdcSupply Current: 200mA max.Display: 3 digit, 7-segment, red LED displayCounting Sequence:Count from 0 to 999 then back to 0 again,increment of +1 with every press of theCOUNT push-button.Dimensions:Display Unit: 50 x 80mm, 13mm heightDebounced Push-buttons Unit: 34 x 36mmPush-buttons: 9mm diameter, 18mm heightEnclosure: 54 x 83mm, 29mm height


4 DIGIT PRESETTABLEDOWN COUNTER WITH OUTPUT

This is a low cost 4 Digit Presettable DownCounter with output and reset. The countinput can be used for both high and lowspeed counting applications. The counterhas four modes of operation that control howthe output behaves when the count reacheszero.Specifications:Supply Voltage: 9 to 12VdcSupply Current: 50mA max.4 Operating Modes:

count stops at zero and holds output lowover-count past zero and holds output lowauto-reset at zero and pulse output lowover-count past zero and pulse output low

Count range: 0000 to 9999 (10,000 max).Count speed: Low 30 cps / High 30,000 cps.Inputs: Reset, Count, Rate.Output Switch: 100mA 30V max.

(Open-Collector of NPN Transistor)Display: red, 4-digit, 7-segment LED

Display Dimensions: 19 x 50mmDimensions: 51mm x 64mm, 15mm height


GENERAL 4 1/2 DIGITCOUNTER (7224)

This general purpose 4 1/2 digit LCD counteris built around the 7224 IC. All the 7224 pinsare brought out. You can custom design it foryour own counter application.


4 DIGIT UP/DOWN COUNTER

This is a low cost 4-digit Up/Down counter.The count range is from 0000, 1, 2 … to9999 (counting up) or 0000, 9999, 9998, ….0001 (counting down). The Overflow outputpulses low (25ms) when the count wrapsaround to zero. This output allows two coun-ters to be connected together to make an 8digit counter. There are 5 control pins:RESET, CLOCK, DOWN, DISABLE andOVERFLOW.Power supply: 9 to 15VDC.Maximum count rate: 30 counts per second.


MULTIFUNCTIONALUP/DOWN COUNTER

Features:This kit comes in handy for people counting,part counting, score keeping, ...counts up or downthe count input may be obtained through on-board pushbuttons or by external pulsesdisplay modes: normal or time (hh:mm andmm:ss)an internal oscillator allows time measure-mentsprogrammable pre-set value with equal out-putself diagnostic mode at power upeasy board-to-wire connector included(20cm wire)Specifications:Counter Input Voltage Range: 3 - 12Vdc

(dry contact switching also possible)EQUAL Output: 5Vdc / max. 50mAmax. Counting Speed: 200 counts / sec.

(2 / sec. with long debounce delay)max. Count: 4 digits (9999 / 23h59m /

59m59s)Power Supply: 9 - 12Vdc or transformer 2 x9Vac / 300mASupply Current: max. 150mADimensions: 125 x 75 x 18mm


02.44

MULTIFUNCTIONALCOUNTER MODULE

This multifunctional counter is Ideal for:counting people or parts, for keeping scores,etc... The HOURS:MIN and the MIN:SECfunctions are also very practical (displays23:59 & 59:59). A built-in oscillator makes itpossible to measure time intervals withoutmaking use of an external oscillator (clockfunction). Counting impulses (addition & sub-traction) can be received from the front panelpush-buttons and the counting inputs. Amemory function constantly compares thecurrent value with a pre-set value and acti-vates an output for as long as both countsare equal.Features:Display Modes: normal time or time interval

(hh:mm and mm:ss)The Internal Oscillator enables one to dotime measurementsCount input through panel push-buttons orby external pulsesSelectable input debounce delayProgrammable pre-set value and an outputfor when the count is equal to pre-set valueSpecifications:Supply Voltage: 9-0-9Vac (AA749) or

9 - 12Vdc (AA729)Supply Current: 150mAMaximum Value Display:

23h59m: 23 hours, 59 minutes or59m59s: 59 minutes, 59 seconds orCount 4 digits: 0000 up to 9999

Maximum Counting Speed:200 counts per sec. or2 counts per sec. (long debounce delay)

Counter Input Voltage Range: 3 - 12Vdccan also use push-button like (GB723) orreed switch and magnet (MB049) orIR single beam crossing detector (AA703)EQUAL Output: 5VDC / max. 50mADimensions (frame included):Height: 90mm, Width: 165mm, Depth: 35mm

MODULE ORDER CODE: AB317MANUFACTURED BY: VELLEMAN

FREQUENCY METER 10HZ - 1MHZ

A reliable frequency meter for the laboratory.It counts with great accuracy from 1Hz to1MHz covering the frequency areas of all thetrade generators .The meter will not load thesignal source that is connected to its input,nor will it cause its frequency to change.Specifications:Supply Voltage: 12Vdc

Supply Current: 160mADisplay: LED, digital, 5 digits, 7-segmentPCB Dimensions (2 PCBs):

70 x 121mm and 33 x 77mmKIT ORDER CODE: AB210

MANUFACTURED BY: SMART KIT

50MHZ, 8-DIGITFREQUENCY METER

This kit is a stand-alone frequency metercapable of measuring the frequency of peri-odic signals up to 50MHz. It has two fre-quency ranges and two sampling rates. Thefrequency is displayed on an 8-digit, LCDdisplay. A plastic enclosure and screen-print-ed front panel is supplied.Specifications:Frequency Ranges:

1Hz to 15MHz and10Hz to 50MHz

Input Impedance: 1MOhm in parallel 10pFInput Socket: BNC panel typeSupply Voltage: 9 - 12VdcSupply Current: 180mADimensions: 70 x 130 x 41mm


HUMIDITY METER WITH LCD

A digital humidity meter with LCD (LiquidCrystal Display) suitable for measuring therelative humidity from 10 - 90 %. The circuitis built around a special humidity sensor,made by Philips Semiconductor, and nineother integrated circuits.Specifications:Supply Voltage: 9VdcPCB Dimensions: 72 x 101mm


TEMPERATURE / LCDPANEL METER 9VDC

Introduces 3 1/2 digit LCD and the very pop-ular 7106 IC. This IC has been used in low-cost multimeters for over 13 years. We use itto measure temperature using a ordinarysignal transistor as the sensor. Data sheetsare provided as is a breadboard area so youcan extend the circuit to build your own volt-meter, ammeter, resistance meter or extend-ed-range temperature meter. Takes away themystery of how multimeters work. Box pro-vided.Supply voltage: 9VDC.PCB Size: 94x55mmDisplay Size: 50x20mm


DIGITAL TEMPERATURE SENSORWITH LED DISPLAY -40 TO 85ºC

This kit makes use of the DS18B20 tempera-ture sensor from Dallas Semiconductor. Apreprogrammed PIC16F630 microcontrollerreads the temperature from this sensor anddisplays it with a 2 digit, 7-segment, red,LED display. Source code is also supplied.This kit introduces one to SMD (SurfaceMount Devices) resistors that has to be sol-dered to the PCB.Power Supply: 3 - 5Vdc

3 x 1.5V AA cells, (AB748) (not incl.)Supply Current: 30mA at 4.5VdcTemperature Range: -40 to 85ºCDimensions: 50 x 55mm, 16mm height

Batter Holder: 48x63x17mmKIT ORDER CODE: AB196

MODULE ORDER CODE: AB242MANUFACTURED BY: ELECTRONICS123

GAMES AND FUN STUFF

ELECTROSTSTAT APPARATUS

The device produces from a 3 to 4.5V bat-tery voltage pulsating high-voltage pulses ofapproximately 80 to 500V.Usage: As joke, for use in physical tests or inorder to catch earthworms required for fish-ing.


02.45

DEFTNESS GAME

The object of the game is to pass a smallwire loop through a thread wire with a lot ofbends and obstacles. The person who touch-es the thread wire with the wire loop, willrelease an acoustic and optic signal. Aninteresting game for parties and for nev-erending evenings.Operating voltage: 9 to 12 Volt


STAIRWAY TO HEAVEN

A game of skill to turn on the Stairway of 6LEDs as the bi- colour LED flashes.Introduces you to several electronics basiccircuits with a surprisingly difficult game toplay. Box included. Good introduction toelectronics. 9V battery.


QUIZ TABLE

Up to four players can compete. LED indi-cates first button pushed. Quizmaster‘RESET’ -button with ‘button pushed’-indica-tion. Two units can be daisy-chained foreight-player-fun!Specifications:on/off switchPower Supply: 9V battery (not included)Dimensions: 110 x 78 x 28mm


BRAIN GAME

This kit using 4 LEDs and 4 push buttonscan provide hours of fun. The aim-of-the-game is to repeat a pattern that is generatedat random. The game can be played bothvisually and audible or visually only (selec-table). It features 4 difficulty levels that canbe selected at start-up. The replay speedgradually increases during the game, tomake it even more challenging. Low powerconsumption. Microprocessor controlled.Auto power off.Specifications:Power Supply: 3 x 1.5V AA cells: (AB748)

(not included)Supply Current: 45mA max.Dimensions: 50 x 65mm


BRAIN GAME WITH COVER

This is the brain game kit that is suppliedwith a stylish cover and knobs. This kit hasthe same specifications as (EB523) exceptfor the additional cover and knobs.Specifications:Power Supply: 3x1.5V AAA cells

(not included)Dimensions: 84 x 67mm, 41mm height


LOVE TESTER

Features:Check your love life!each partner holds one end of the PCB, thenthey join hands, watch the meter go...great fun at parties, among friends, etc...it has a 10 LED readout and an audible‘love-level’-indication

flashing LEDs indicate that you’re a red-hotloverit has a wide sensitivity range that covers theentire spectrum, from the cool to a steamingLatin lover!power switch includedSpecifications:Power Supply: 9V battery (not included)Dimensions: 105 x 80 x 25mm


ELECTRONIC DECISION MAKER

This kit helps making difficult YES or NOdecisions. Ideal for the indecisive. Simplypush the button to start the flashing ofYES/NO LEDs. The flashing speed graduallydecreases and finally one LED remains lit.Specifications:Power Supply: 9V battery (not included)Supply Current: 1µA idle / 8mA in use (this isvery low)auto power-offDimensions: 55 x 30 x 35mm


ELECTRONIC DICE

This kit is an electronic die with LED indica-tion. It rolls out slowly when the push buttonis released.Specifications:Power Supply: 9V battery (not included)Supply Current: 10mA max.Dimensions: 42 x 60mmHint: If the normally dimmed LEDs are stilllighting up, you can replace the 2V7 ZD1with a 3V6 zener diode (500mW).


02.46

DICE WITH LED DISPLAYUSING PIC16C54

One of the most popular electronic kits everis the LED dice. Now we have used the pop-ular small micro-controller, the PIC16C54 to’roll the dice’. All software code is availableon the Internet: http://kitsrus.com/soft.html inthe file k69.zip. The documentation is com-mented so that you can learn how to pro-gram these devices yourself.Power supply: 9V battery (EB160)


SHAKING DICE

Features:This kit requires no push buttons, just give ita shakeit rolls out slowly and flashes the last combi-nationmicroprocessor-controlledauto power-offSpecifications:Power Supply: 3Vdc battery (CR2025 orCR2032) (not included)Supply Current: 9mADimensions: 36 x 36 x 32mm


LED DICE WITH SLOWDOWN 9 VDC

The kit uses 7 LEDs to simulate the rolling ofa dice after the Roll button is pushed. It hasa slowdown feature so you can see the’rolling’ of the dice slowing down and thenstop. The box is included with the kit.Power supply: 9VDC


DAUL ELECTRONIC DICE

Board games provide an excellent source ofpleasant and healthy entertainment.However, the dice can be a constant sourceof distraction : they fall off the table, allowcheating, one or more players don’t see theresults properly and so on. There can be nodoubt at all about the result displayed on thiselectronic dice module, and cheating is outof the question. Two fully independent dice.At your choice you can play with one or twodice. Displays are switched off automaticallyafter 30 seconds to save battery power.Specifications:power supply : 8 to 12VDC or 6VAC / 60mAPCB dimensions : 76 x 70mm


WHEEL OF FORTUNE

Features:This kit is a 10-LED wheel of fortunepush the button to start the spinning actionthe spinning speed gradually decreasesfinally it stops and one LED remains litauto power-offlow power consumptionSpecifications:Power Supply: 9V battery (not included)Supply Current: 19mADimensions: Ø64 x 33mm

KIT ORDER CODE: GB587 MANUFACTURED BY VELLEMAN

ROTATING ROULETTE 10 LEDS9 VDC

Ten LEDs are arranged in a circle. Pressingthe switch turns one LED on in turn to simu-late a roulette ball spinning in the wheel. Aslowdown circuit gradually brings the ball toa stop. The circuit uses the versatile 4017 ICand a voltage controlled oscillator circuit.

Power supply: 9VDCKIT ORDER CODE: PB301MANUFACTURED BY: DIY

ELECTRONIC WHEELOF FORTUNE

After releasing the push-button, the light sig-nal rotates quickly at the 10 LED’s, slowsdown and then stops at random at one of theLED’s. During operation all LED’s shineexcept that LED that just receives the signal.That’s why the luminous board looks verydecorative.Operating voltage: 9 to 12VDC


ROULETTE

This kit uses 37 LEDs. It generates a spin-ning sound when active. There is a ‘Winner’-tune for each colour. It spins LEDs betweengames. Pushbutton operation. It makes useof microprocessor technology.Specifications:Power Supply: 3 x AA batteries (not includ-ed)auto power-offlow power consumptionDimensions: Ø91 x 33mm


CLASSIC TV GAME - PAL VERSION

This kit is used to play a Tennis type BallGame on TV (complying with the PAL stan-dard). One player mode: four difficulty levels,to select a level hold one of the move but-tons then press RESTART. Two playermode: press RESTART. Press both movebuttons to “smash” or to start serve. Only theserver can score points.

02.47

Features:It has Video and Audio OutputAdjustable Brightnessauto power offSpecifications:Power Supply: 3 x 1.5V AA batteriesDimensions: 75 x 140mm


SPY STUFF

LISTENING STETHOSCOPE

You are able to listen through thin walls,doors, windows, etc. Highly sensitive pream-plifier with microphone capsule and head-phone. To be used for observing animals(e.g. mice), as baby-alarm etc.Operating Voltage: 9VDC


TAPE RECORDER SWITCHFOR TELEPHONE

This kit uses a FET to switch on a taperecorder when the phone is picked up. It willwork with low voltage tape recorders as lowas 1.5V. It requires the REMOTE & MICjacks of the tape recorder to be available.Plugs are provided.


AM / FM TRANSMITTER ‘BUGS’DETECTOR 9VDC

The placement of electronic eavesdroppingdevices (bugs) is becoming a usual phenom-enon. The detection of electronic eavesdrop-ping devices is not very easy. Using thisdetector you can ensure the privacy of yourpersonal life, because it allows you to sweepfor electronic eavesdropping devices.Sensitivity is adjustable using a potentiome-ter. Audible indication using a loudspeaker.Loudspeaker and telescopic antenna areincluded.Supply Voltage: 9Vdc

Supply Current: 30mA max.Detection range: 1 - 1000 MHzPCB Dimensions: 15 x 30mm

KIT ORDER CODE: GB734MANUFACTURED BY: SMART KIT

HF-DETECTOR MODULE

With this high frequency (HF) detector it ispossible to locate small bugging devices thatare active in a room, computer or telephone.The sensitivity of this detector is set so thatonly the powerful, > 50mW, bugging devices,with a transmitting radius larger than 150m,are detected. This instrument is used todetect bugging device signals in the frequen-cy range 1 to 200 MHz. Requires a 9V bat-tery.


TELEPHONEACCESSORIES

REMOTE CONTROL VIA GSMMOBILE PHONE (PHONE NOT INC.)

Features:Turn equipment ON and OFF from a randomplace via a cellular phone, that you speciallyreserved to use with this kit.Applications: Single relay output turns on thelights or the heating, opens your gate, con-trols animal feeders, make believe you are athome, activate a car alarm, etc. It requires a cellular phone to receive all itsactivating incoming calls. It can not receivephone calls directly. Ring detection is used inthe circuit to avoid phone charges.No need to open or modify your cellular orconnect it with other devices Compatible with most cellular phonesSpecifications:Dual operation mode: toggle ON/OFF or ONwith auto turn-off timer Timer settings: 0.5s, 2s, 30s, 1 min, 5 min,15 min, 30 min and 1 hour Single relay output: COM, NO/NC 3APower supply: 12VDC / 100mA

Dimensions: 101 x 42 x 23mmKIT ORDER CODE: GB819


DTMF TONE GRABBER /DECODER 12VDC

This DTMF grabber kit can detect anddecode the dial tones generated by a tele-phone (does not detect pulse dialling). It canbe connected to the telephone line orreceive audio DTMF from a loudspeaker viathe built-in microphone. It makes use of theDTMF receiver CM8870 from CaliforniaMicro Devices and a preprogrammed micro-controller. The digits represented by theDTMF dial tones are displayed on a 16 char-acter, single line LCD display. Although only16 digits are displayed, up to 32 digits canbe saved in memory. All 32 digits can beread by scrolling the display left and right.There is also a serial output for sending thedetected tones to a PC using ASCII charac-ters.Specifications:Supply Voltage: 9 - 12VdcDisplay: 16 digit, single line LCDBuffer: max. 32 digitsInputs: connect directly to telephone line or

via audio from speaker to microphoneOutputs: LCD display and serial RS232 in

ASCII character formatDimensions: 56 x 97mm, 20mm height


REMOTE CONTROL BY TELEPHONE

This kit makes it possible to remotely turn upto three devices on or off over the telephoneline. There is place for 3 output relays, butonly 1 is supplied. It can only be controlledby a tone dialing (DTMF) telephone. It isalso possible to check the condition of oneswitch (open or closed). Example: when youare away on holiday, you may switch thelights on and off from time to time, turn onthe heating before returning home or checkthe alarm. A major advantage of this circuitlies in the fact that audio signals are used totell whether a specific output has beenturned on or off. Operation is protected by auser defined security code, which is simplykeyed in from the telephone keypad.Specifications:Supply Voltage: 12Vac / 300mAOutput Relay Switch: (only 1 supplied)

12V SPDT 10A / 250Vac relay is used,only the common and normally openconnections are used

Automatic pick-up can be selected for

02.48

± 3 or ± 8 ringsAutomatic hang-up if no code is entered

within 20 secondsDimensions: 105 x 130mm, 20mm heightOptional (not included):Two Output Relays: 12V SPDT 10A / 250Vac

2 x (AC897)KIT ORDER CODE: GC043


TELEPHONE LINE SWITCHER II12VDC

This device connects to the telephone lineand can be used to remotely control up to 4relay outputs using a DTMF (tone dialing)telephone. A number of user settings areavailable to improve the useability and secu-rity of the device. The kit comes completewith a small plastic case with silk-screenedfront and rear panels.The unit is controlled by an Atmel 89C2051microcontroller. Source code is not available.


TELEPHONE CALL LOGGER 12VDC

This is a telephone call logger kit. It recordsall outgoing telephone call numbers, their“real time” start and stop times. It acceptsonly DTMF tone keypresses. Data is storedin 16K (is supplied) of non-volatileEEPROM memory that is expandable up to64K for storing 2848 10-digit phone num-bers. This memory remembers data evenafter power was removed. Although it oper-ates stand alone, it does not have to be con-nected to a PC while logging, a PC isrequired to receive call data via serial port.This call data is in a format that can be easi-ly imported into Microsoft Excel. An enclo-sure with screen-printed front and rear pan-nels is supplied.Supply Voltage: 9 - 12VdcSupply Current: 300mADimensions: 100 x 132 x 30mm


TELEPHONE AMPLIFIER

This telephone amplifier may be used as afreestanding amplifier with speaker, e.g. tolisten to a telephone conversation, or theoutput may be connected to an amplifier ormixing panel (e.g. radio stations).Specifications:Input: isolation transformer interfaceSpeaker Output: 0.5W / 8OhmLine Output: 0dB (0.775Vrms)Power Supply: 7 - 9Vac or 9 - 12Vdc /150mADimensions: 63 x 52mm


SUCTION CUP PHONE PICKUPWITH SPEAKER

It is often convenient for people in a room tolistern to both sides of a telephone conversa-tion. The amplifier in this kit has beendesigned for this purpose. A magnetic pickup with suction cup attaches onto the ear-piece of your phone at one end and into theamplifier at the other end. Feeds into an 8ohm speaker (included) after amplification.Volume control trimpot built in. There is nodirect electrical connection to the telephonesystem.


INTERCOMS

TWO STATION INTERCOM 6-12 VDC

A very useful kit which can be used wherev-er a light, economical and portable intercomis required. Each unit contains its own micro-phone, speaker and audio power amplifiercircuit using the LM386. The circuit may bemodified to become a hard wired bug. Thekit includes 10m of cable and two speakers.PCB Size: 55x30mm

Power supply: 6 to 12VDCKIT ORDER CODE: PB049MANUFACTURED BY: DIY

FIBRE OPTICS VOICETRANSMISSION 9VDC

The kit allows you to send sound through1mm plastic fibre optic cable (4m cableincluded). On the transmitter circuit boardthere is a microphone and a circuit to modu-late the light emitted from a LED. The LED iscontained in a plastic case which allowseasy connection of the fibre optic cable. Onthe receiver board there is a photo-darling-ton receiver unit, a speaker and a circuit toconvert and amplify the detected signal backinto a sound wave. Because the signal trav-els in the fibre optic cable as a light wave itis unaffected by any electric or magneticfields that it travels through.Supply Voltage: 9VDC for each PCBPCB size Tx: 25x45mmPCB size Rx: 43x43mm


RECORDING DEVICES

4 OR 20 SECOND MESSAGERECORDER / PLAYBACK MODULE

This is kit makes a high-quality voice (sound)recorder with playback capability. It can beused to greet visitors, play pranks, warn bur-glars,…It can record 1 message of up to 20 secondsor 5 different messages of up to 4 secondseach.Two Playback modes:

Push once to play message orPlay message until button is released

It makes use of EEPROM technology with100-year message retention. No memoryloss in case of power failure. A line-outputand loudspeaker output is available. A loud-speaker and built-in microphone is supplied.Optional: a rotary switch is required to selectone of five messages.Specifications:Power Supply: 8 - 18Vdc at power socket or

6V battery (4 x AA or AAA) (not included)Supply Current:

DC at power socket: 4mA to 100mA max.Battery: 20µA standby / 100mA playback

Speaker Output: 120mW into 8 to 16 OhmSampling Frequency: 6.4kHz

02.49

Dimensions: 94 x 73mm, 25mm heightNot Included:Rotary Switch: (HB313)


40 SECOND MESSAGERECORDER ISD2540

Record as many messages as you can inthis modern, non-volatile, combined audioprocessing & memory chip from InformationStorage Devices (ISD2540). One button toSTART/PAUSE & a second button toRESET. There is also the option to endlesslyloop the first recorded message.Power Supply: 6Vdc


120 SECOND MESSAGE RECORDERISD25120

Record as many messages as you can inthis modern, non-volatile, combined audioprocessing & memory chip from InformationStorage Devices (ISD25120). One button toSTART/PAUSE & a second button toRESET.Power Supply: 6V DC.


HEALTH, SAFETY ANDENVIRONMENT

ANTI-FLEA-GENERATORFOR THE CAT BASKET

This generator produces ultrasonic sounds,which are adjustable within the range ofapproximately 8 to 35kHz. It is said, thatcrawling and jumping parasites are banishedthrough the ultrasonic sound. Frequency canbe adjusted so that the domestic animal willnot be disturbed.Specifications:Supply Voltage: 9VdcNot Included:Loudspeaker 8 Ohm (not piezo) ora dynamic 8 Ohm earphone


MOSQUITO, FLEA AND TICKREPELLER 9VDC

The kit emits an adjustable, especially highpitched whistling sound. This sound is avoid-ed by mosquitoes. The frequency isadjustable through a trimmer pot. The soundis adjustable from an especially high sound(audiable by humans) to the deep ultrasonicrange (not audiable by humans). Theseultrasonic sounds also repell vermins suchas ticks and fleas.Power supply: 9VDCInput current: <7mAFrequency: adjustablePCB size: 27x55mm

KIT ORDER CODE: PB004MANUFACTURED BY: KEMO

ULTRASONIC DOG WHISTLE

This electronic ultrasonic whistle emits high-powered ultrasonic sounds which are widelyaudible for dogs. These high frequencies aremostly not to be heard for the human being,dogs can be drilled with it. The frequency isadjustable between approximately 8000 to25000 Hz. A special piezo loudspeaker isincluded. Indispensable for all dog-owners! Operating voltage: 9V


ULTRASONIC SOUND GENERATOR

This ultrasonic generator module can gener-ate ultrasonic sounds that scare away ani-mals and insects: e.g. rats, mice, wild rab-bits, mosquitoes. It can also be used as adog whistle. It generates powerful, pulsating,high pitched sound-waves with adjustablefrequency. The module contains a built-in,special piezo loudspeaker. In case more out-put is required one can connect an additional“piezo-tweeter with flare” (GB784) or “ultra-sonic wall loudspeaker module” (GB773).Specifications:

Supply Voltage: 12 - 14VdcSupply Current: 40mALoudspeaker Output: max. 4 additional

piezo loudspeakers!Audio Frequency Range: (adjustable)

12kHz - 38kHzDimensions: 92 x 55 x 28mm


POWERFUL ULTRASONICSGENERATOR

This module can generate ultrasonic soundsthat scare away animals like rodents. It gen-erates pulsating, powerful, ultrasonic sound-waves (high pitched audio signals) withadjustable frequency. There are 4 piezo-loudspeakers included with this module.Specifications:Supply Voltage: 12 - 24VdcSupply Current: 50mA at 12Vdc and

100mA at 24VdcLoudspeaker Output: only for piezo loud-

speakers!Audio Frequency Range: (adjustable)

10kHz - 40kHzDimensions: 75 x 45 x 28mmDimensions of the piezo-loudspeakers:

(round part) 14mm x 30mm diameterMODULE ORDER CODE: GB788


ULTRASONIC SOUNDGENERATOR MODULE

This module can generate ultrasonic soundsthat scare away animals and insects: e.g.rats, mice, wild rabbits, mosquitoes. It canalso be used as a dog whistle. It generatespulsating high pitched audio signals withadjustable frequency.Specifications:Supply Voltage: 12 - 15VdcSupply Current: 50mA at 12Vdc and

100mA at 15VdcLoudspeaker Output: only for up to 5 piezoloudspeakers!Audio Frequency Range: (adjustable)

10kHz - 40kHzDimensions: 75 x 45 x 28mmIt requires a piezo-speaker, like (GB784) or

(GB773) (not included)MODULE ORDER CODE: GB779


02.50

SMOKE ALARM 12V

This visual smoke alarm switches a relay ifthick smoke gets between the installedinfrared light barrier. Sirens, alarm lamps etc.may then be switched by means of the relay.This Smoke Alarm is a circuit for instructionand amateur purposes. It is not suitable foruse as smoke alarm for the protection ofproperty and life! The circuit does not reactor hardly reacts to ”thin” smoke like e.g. cig-arette smoke. So to try out you should useheavy and thick smoke. Operating voltage: 12VDC 150mA


GAS SENSOR - SPIRITS TESTER

This instrument indicates gases such asalcohol, acetone, benzole, propane, carbonmonoxide (contained in the smoke of fire).Perfect as alarm for gases and fire.Operating voltage: 12V approx. 150mAIndication: LED and relay ( 1 x ON 3 A)Dimensions: 45x55mm, 25mm height


CLEAN-AIR MEASURING DEVICE

Changes of the clean-air are indicated with ameasuring unit. Depending on the intensity,air contaminations through cigarette smoke,solvent vapours, exhaust gas, kitchenvapours, factory exhaust gas etc. are indicat-ed by means of a measuring device. Thedevice only indicates that the air quality haschanged, it is not able to analyse the kind ofair contamination (no chemical classifica-tion!).Operating voltage: 12VDC 200mA


GEIGER-MULLER COUNTER KIT

Radiation and radio active waste is bad forthe living and environment. This kit is usedto measure radiation and give an acousticindication of its intensity. The sensitivity is atits highest for gamma rays and high energybeta rays. The assembly is compact andmay be mounted into a plastic enclosure,together with a 9V battery.Specifications:Power Supply: 9V battery (EB160) (not incl.)

battery life is approximately 2 months forcontinuous use and normal radiation levels

PCB Dimensions: 55 x 100mmAssembled Height: 25mmOptional: (not included)Enclosure: (EB548) or (AA042)


ION GENERATOR

Create your own Indoors Health ResortClimate with this device. This kit charges airmolecules negatively to become negativeair-ions. This is done by generating a veryhigh negative output voltage that is requiredto transfer electrons to surrounding air mole-cules. Although the output voltage is high,the output current is very low.This kit has an air-regenerating effect byremoving dust and bacteria from the air. Ahigh share of negative air-ions is necessaryfor the general well being: it reduces trou-bled sleep, aggressiveness, headache, sen-sitivity to changes in the weather, lack ofconcentration, etc.Specifications:Supply Voltage: 9 - 12VdcSupply Current: 80 - 150mAOutput Voltage: 3 - 7kVDimensions: 44.5 x 54.5mm, 25mm height


NEGATIVE OR POSITIVE IONGENERATOR 220 VAC

A mains powered ion generator which maybe made into a negative or positive ion gen-erator depending on the orientation of the 30diodes. The use of this circuit will greatlybenefit your health by cleaning the air fromdust, pollen, smoke and pollution and effec-tively reduces the severity of symptoms insome respiratory troubles. An increased con-centration of negative ions in the air makes itfeel fresher, brings a feeling of well being,helps in reducing stress.This kit makes use of the Crockroft-Waltonvoltage multiplier that consists of a string ofdiodes and capacitors connected in succes-sion. Although the output voltage is high, thecurrent is very low. A neon light indicateswhether the kit is on or off. The kit must bebuilt into a ventilated enclosure for routineoperation.Specifications:Supply Voltage: 220VacFuse Protection: 20 x 5mm, 100mA / 250VOutput Voltage: 5kVDimensions: 52 x 110mm, 20mm height


ELECTRONIC ACUPUNCTURE3 TO 6VDC

This electronic acupuncturing machine canbe used to cure many disorders using theelectronic acupuncturing method.An illustration describes effective acupunc-ture points on the body where this kit can beused.Dr. Kazumi Masaki of the University ofOsaka was the first to make use of this elec-tronic technique.Not only did it prove great success but evenimproved on the age-old acupuncturing tech-niques.By placing 2 electrodes against the skin theacupuncturing machine stimulates the nervepoints and relaxes musclespainless unlike the old needle technique.This method could one day even replaceconventional medicines.Operating voltage: 3-6VDC


DECALCIFIER AGAINSTCALCIFICATION

This device is not harmful to the environ-ment, i. e. without chemicals and operateson a physical-inductive base. Easy to mount,no intervention into conduits. This moduleprotects washing machines, dish washers,heating boilers etc. Operating Voltage: 9 to 12VDC

02.51

Current load: <50mAKIT ORDER CODE: FB646


ULTRASONIC WIND SPEED METER

This kit is used to measure wind speed. Ithas no moving parts and makes use of twoultrasonic transducers facing each other andspaced 18cm apart. Wind speed is displayedon a 2 line, 16 character LCD. The circuit iscontrolled by a PIC16F628 microcontroller.Speed is displayed in meters and feet persecond and also kilometer and mile per hour.There is also a full averaging mode usingprevious readings.Specifications:Power Supply: 9V batteryWind Speed: up to 80 km/h (50 mile/hour)PCB Dimensions: 50 x 83mm


CAR ACCESSORIES

PARKING RADAR

If you have problems parking then this kit isfor you. Using (ultrasonic) sound waves,whose frequency is beyond our range ofhearing, we can "measure" a distance.Consequently, a sensor mounted at the backof the car can give an indication of the dis-tance between your car and the car parkedbehind you or other obstacles (only at thesame height as the sensor). When the pre-set minimum distance is crossed, an audiblesignal is generated.Specifications:detection range : 5cm - 1.5m (adjustable)detection angle : 5°supply voltage : 10 - 15VDC / 16mAPCB dimensions : sensor : 28 x 95mmbase : 48 x 125mm


ULTRASONIC DISTANCERALERTER / ALARM

A LED lights up if a body approaches theultrasonic sensors at a distance of 10 to 80cm. Ideal to use as a parking-in assistancefor cars in garages, alarm signal for personsor animals staying in a certain area, objectrecognition at assembly lines, theft monitor-ing for larger objects etc. The device worksaccording to the same principle as the ultra-sonic echo ranging of bats! Operating voltage: 9 to 12VDC


CRYSTAL-LOCKED ULTRASONICMOVEMENT DETECTOR

This kit is useful for detecting movementwithin 4m range in a 40 degree cone in frontof the sensor. A matched pair of ceramictransducers, operating at 40 kHz is used forsensing. No calibration is needed since a 40kHz crystal oscillator drives the circuit at theoptimum frequency of the transducers.Sensitivity is adjustable. A LED lights up anda transistor output goes low when movementis detected. Operating voltage: 9 to 12VDC


MOVEMENT DETECTOR II

This kit is useful for detecting movementthrough a doorway. A matched pair of ceram-ic transducers, operating at 40 kHz is usedfor sensing. The ultrasonic sensors are mostsensitive within a 40 degree cone in front ofthe kit. No calibration is needed since a 40kHz crystal oscillator drives the circuit at theoptimum frequency of the transducers.Sensitivity is adjustable. A LED lights up anda transistor output goes low when movementis detected. It is best not to power this kitwith batteries, that go flat, because the kit’ssensitivity is dependent on the supply volt-age. Use a plug-in DC-supply like (AA729).

Operating Voltage: 9 to 12VdcKIT ORDER CODE: AB684MANUFACTURED BY: DIY

ULTRASONIC RADAR 12 VDC

A circuit that can be used as a movementdetector in any closed space. It can be usedas a sensor for any alarm system. The circuitis ideal for use in the car. The useful rangeof the radar is about 10 meters. The sensitiv-ity of the detector can be adjusted to suityour particular need.Power supply: 12VDC


ANALOGUE R.P.M. INDICATORWITH LED’S 12 VDC

The electronic version of the most essentialmeasuring instrument within a car. It is reli-able and simple to construct. The small sizemakes the installation possible almost any-where within a car. It provides a readingwithin the range of 0 to 7000 rpm. The dis-play takes the form of a circular light barmade up by LEDs and provides a readingwith a discrimination of 250 revolutions perLED.Power supply: 12VDC / 130mAInput impedance: 100k Ohm


DIGITAL TACHOMETER

For cars or motorcycles with a petrol engine.May be used as a general purpose revolu-tion counter.range : 100 - 9900 revolutions/minute2 digit displayeasy calibrationpower supply : 10 - 15VDC / 200mAPCB dimensions : 80 x 45mm + 80 x 60mm

02.52

front panel dimensions : 70 x 90mmSee special instructions in manual for usewith electronic ignition.


DIGITAL R.P.M. INDICATOR 12 VDC

The most essential and most useful instru-ment needed for a car is offered in an elec-tronic version. The circuit is reliable, highlyaccurate and easy to assemble. The enginerevolutions are counted and the result is dis-played on a four digit display. Engine revolu-tions in the range between 0 and 7000 rpmare measured. The circuit can be installed inalmost any car due to its small size.Power supply: 12VDC / 180mAMaximum reading: 7300 r.p.m.


ELECTRONIC TRANSISTORIGNITION FOR CARS

This kit gives your car the feel of an expen-sive luxury car. Better starting and smootherrunning, particularly at very high and verylow RPM. Lower fuel consumption, less pol-lution, lower servicing costs. Drive economi-cally and drive electronically. It may only beused with petrol or gasoline engines andonly for cars with negative ground.Specifications:Supply Voltage: 12Vdc (6V is also possible)Hint: For use on a 6V system replace the fol-lowing parts:R1, R2 with 150 Ohm / 1WR3 with 68 Ohm 1/4WR5, R6 and R7 with 68 Ohm / 1WSupply Current: 4A max.connection speed: up to 500kHzDimensions: 70 x 35mm


HEAD LIGHT WARNING ALARM12VDC

The head light indicator may be set for one

or two functions. To indicate that the headlights should be switched off after switchingoff the ignition contact (battery protection), orto indicate that the head lights should be ononce ignition contact is switched on (obliga-tory in some countries). Supply voltage: 12V DCPCB size: 48x57mm


COURTESY LIGHT DELAY 12 VDC

A clever and useful circuit for the driver.When you enter the car and the doors areclosed it keeps the interior lights on for a fewseconds to give you time to put the key inthe lock, fasten your safety belt and start thecar. Stop fumbling in the dark! The delay isadjustable. The circuit has been designed towork off a car battery.Power supply: 12VDC


CAR COURTESY LIGHTCONTROL KIT 12 VDC

This kit is useful for finding the ignitionswitch or seat belt in the dark. This kit canbe used to control the interior illumination ofa car. One push-button operation. Adjustableswitch off delay. A safety circuit automaticallyswitches off the interior light after 5 minutes.A Push-button is supplied. Protected againstbattery polarity reversal.Specifications:Power Supply: 12 - 15VdcSupply Current: 13mA min.Switch-off delay: (adjustable) 0 to 60 sec.Dimensions: 45 x 70mm, 20mm height


WINDSHIELD WIPER CONTROLLERWITH RELAY 12 VDC

A very useful circuit that will let you adjustthe pause-time-interval between wipes ofyour car’s wipers. One can adjust the wiperrate according to the heaviness of the rain. Itcan be fitted easily in any car. The kitincludes an output relay switch.Working voltage: 12 - 14VDCCurrent: max. 200mA

Wiper Rate: 10 - 60 times per minuteKIT ORDER CODE: PB130

MANUFACTURED BY: SMART KIT

WINDSHIELD WIPER ROBOT ORINTERVAL TIMER 12 VDC

This is an adjustable interval, periodic timerkit with two identical relay output switches.Both relays switch simultaneously. Up to 3different time intervals can be selected withthe PCB mounted rotary switch. Ideal for thewindshield wipers of a car. It can also beused for an automatic slide projector.Specifications:Supply Voltage: 12 - 15VdcSupply Current:

relays off: 25mArelays on: 100mA

Timing Periods: (selectable) 5, 10 or 20 sec.Output Relay Swithes: (Two SPDT relays)

2 x COM., 2 x NC and 2 x NO connectionsare available at screw terminals

Relay Contact Rating: 7A / 220V eachDimensions: 52 x 82mm, 25mm height


CAR INTERFERENCE SUPPRESSOR12 VDC

This kit is an electric filter that was designedto eliminate the interference signals generat-ed by a car’s engine, wipers, flash indicatorsand air conditioning. These radio frequencyinterference signals are particularly annoyingwhen trying to listen to weak radio broad-casts. This kit has to be connected in serieswith the power supply cables of your radio.Specifications:Supply Voltage: 18Vdc max.Current Rating: 3ADimensions: 59 x 72mm, 45mm height

ORDER CODE: PB190

02.53

UNVERSAL CAR NOISE FILTER

This is yet another high quality electric filtermodule that is used to suppress interferingsignals generated by a car’s engine. Thesesignals can affect devices such as the carradio and audio system. You simply connectthis filter in series with the power line of theaffected device.Supply Voltage: 12 - 48VdcMaximum Current: 20ADimensions: 45 x 50mm, 22mm height

MODULE ORDER CODE: AC527MANUFACTURED BY: KEMO

COMPUTER ACCESSORIES

SERIAL KEYPAD MODULE

AB609

This serial keypad module can be used toinput numerical information into a PC. Itmakes use of a pre-programmed microcon-troller. Data communication is done via theserial port of a PC. Data is sent in ASCIIcharacter format that can be accessed withHyper Terminal, a standard Windows com-munication program. This module is ideal forprogrammers who want to quickly test theirown serial interface programs or speed upthe design process of a product. Computersoftware is not included.Specifications:This module is powered by the serial portand does not require an external power sup-plyCurrent Consumption: 3mAKeypad: 12 push-button, 3x4 matrix keypadData Format: ASCII charactersBaud-rate: 9600 bits per secondParity Bits: noneData Bits: 8Stop Bits: 1Dimensions: 55 x 82mm, 25mm heightNot Included:A free serial RS232 port on a PCA serial cable 9-way plug to socket: (AB419)


12-BIT DATA ACQUISITION UNIT

12-bit Data Acquisition System. It uses aMAX186 ADC. It all fits inside an extended Dshell case which plugs onto the parallelDB25 connector of your PC. It has 8 analoginputs, 4 digital inputs & 4 digital outputs.


PARALLEL PORT POCKETSAMPLER 0-2V OR 0-20V

This compact PC-driven sampler monitorsvoltage changes over periods ranging frommilliseconds to months. It can also be usedas a simple low frequency digital scope toexamine audio and other signals up to about5kHz. No batteries are required as it is pow-ered from the computers parallel port. Thekit fits into an extended D shell case that isincluded. Software is only on the Internet:http://kitsrus.com/soft.html and use the filek112_v4.zip.


TEMPERATURE DATA LOGGER

This is an 8-pin micro controller based circuitfor temperature data logging via the serialport of any computer.Up to four remote digital temperature sen-sors, DS1820 or DS18S20, can be connect-ed to this kit. Only one sensor is supplied inthis kit. Use a terminal program or download thesoftware from the Internet to capture a con-tinuous temperature data stream. A jumper isused to select either Degrees Celsius orFahrenheit temperature calibration. This kitdoes not require an external power supplyas the computer’s serial port powers it.PCB Dimensions: 38 x 38mm

Optional (not included):Three Additional Temperature Sensors:DS1820 or DS18S20: 3 x (AC848)


4 CHANNEL USBRECORDER / LOGGER

This kit can be used to record DC signals orslow-moving signals over very long periods.It is connected to the USB port. The meas-urements are automatically stored on yourhard disk for further processing. No powersupply is required as it is powered by theUSB connection. Installation is easy andstraightforward. Signals are displayed on thePC screen using a DVM or analogue display.The enclosure, USB cable and PC-LAB2000Software is supplied.System requirements:

IBM compatible PC, Windows 98SE, ME,XP software can be down loaded fromthe Internet: http://www.velleman.beclick on Support, Downloads select the file:PC-Lab2000 v1_36.zip or later and also,K8047_PCS10_DLL.zipSVGA display card (min. 800x600),mouse, CD-Rom playerfree USB port

Specifications:Hardware:USB connected and poweredfour DC-coupled input channelsinput impedance: 1Mohmmaximum sampling frequency: 100Hzfour input ranges: 3V, 6V, 15V and 30Vinput sensitivity: 10mVaccuracy: ± 3% of full scalemaximum input: 30Vdc max.power and recording / diagnostic LEDSoftware:digital DVM readout or analogue trace4 channels record simultaneouslyminimum / maximum sample hold functiontimescale: 1 sec. - 1000 sec. per divisionscreens or data can be saved and recalledautomatic recording option (long recordings)on screen markers for time and voltageDLL included for transferring Waveform Data

to an Excel SpreadsheetKIT ORDER CODE: GC093

MODULE ORDER CODE: AB316MANUFACTURED BY: VELLEMAN

02.54

ONE CHANNEL DIGITAL PC SCOPE

The kit is a single channel digital storageoscilloscope, using a computer and its moni-tor to display waveforms. All standard oscillo-scope functions are available in theWindows program supplied. Its operation isjust like a normal oscilloscope. Connection isthrough the computer's parallel port, thescope is completely optically isolated fromthe computer port.Features and General Information:frequency response: 0Hz - 12MHz (± 3dB)single channelinput impedance: 1Mohm / 30pFmarkers for voltage, time and frequencyvertical resolution: 8 bitauto setup functionoptically isolated from computerrecord and display of screens and datasupply voltage: 9 - 10Vdc / 500mAdimensions: 230 x 165 x 45mmweight: 400gminimum system requirements:

IBM compatible PC, Windows 95, 98,ME, (Win2000 or NT possible),XP software can be down loaded fromthe Internet: http://www.velleman.beclick on Support, Downloads select the file:PC-Lab2000 v1_36.zip or later,SVGA display card (min. 800x600),mouse, CD-Rom playerfree printer port LPT1, LPT2 or LPT3

Specifications:Oscilloscope:timebase: 0.1µs - 100ms per divisiontrigger source: Channel 1 or free runningtrigger level: adjustable per ½ divisioninput sensitivity: 10mV - 3V / divisionrecord length: 4096 samplessampling frequency: 800Hz - 32MHz

(Real time)true RMS readout (only AC component)Transient recorder:timescale: 20ms - 2000s / divisionmax. record time: 9.4hour / screenautomatic storage of dataautomatic recording for more than 1 yearmarkers for time and amplitudezoom functionSpectrum analyser:frequency range: 0 .. 400Hz - 16MHzlinear or logarithmic timescalezoom functionoptional: (not included)insulated measurement probe x1 / x10:

EB310 / GB407soft carrying case: GB577adapter 9Vdc / 850mA: AB006

KIT ORDER CODE: GC092MODULE ORDER CODE: GB835 / GB823


PC FUNCTION GENERATOR0 - 1MHZ

This DDS, (direct digital wave synthesis),signal generator kit has to be connected toyour PC printer port.Features:frequency range: from 0.01Hz to 1MHzcrystal-based stabilityoptically isolated from the PClow sine wave distortionTTL-level synchronisation outputstores up to 32K of waveform pointsyou can create your own waveforms with

the integrated signal wave editorfunction generator screen with signal

preview predefined library waveforms are included:

noise, sweep, ...standard waveforms: sine, square, triangleextended bode plot possibility, used with

Velleman PC oscilloscopescan be chained with Velleman PC

oscilloscopes to the same PC printer port(LPT1, 2 or 3)

includes:enclosure, user manual, CD withPC-Lab2000 Windows™ software:95, 98, ME, Win2000, XP or NT possiblefor the function generator and VellemanPC oscilloscopes

minimum system requirements:IBM compatible PC, Windows 95, 98, ME(Win2000 or NT possible),XP software can be down loaded fromthe Internet: http://www.velleman.beclick on Support, Downloads select the file:PC-Lab2000 v1_36.zip or later,SVGA display card (min. 800x600),mouse, CD-ROM,and free printer port LPT1, LPT2 or LPT3

Specifications:maximum sample rate: 32M samples / sec.direct digital wave synthesis (DDS)32K wave tabledistance control via RS232frequency setting resolution: 0.01%amplitude range: 100mVpp to 10Vpp with

a 600 Ohm output loadamplitude resolution: 0.4% of full scaleoffset: from 0 to -5V or 0 to +5V max.

(resolution 0.4% of full scale)vertical resolution: 8 bits (0.4% of full scale)typical sine wave distortion (THD): < 0.08%output impedance: 50 Ohmdimensions: 235 x 165 x 47mmsupply voltage: 12Vdcsupply current: 800mAOptional: (not included)soft carrying case: GB577PC parallel cable: GB714output signal connecting cablesadapter 12Vdc / 800mA

KIT ORDER CODE: GC091MODULE ORDER CODE: GB840 / GB648


PC DATA ACQUISITION UNIT

Use the parallel port of your PC as a realworld interface. It enables your PC to bothmonitor & control external events anddevices. The world is a mixed analog & digi-tal world. With the appropriate sensors thePC can monitor physical variables such aspressure, temperature, light intensity, weight,switch state, movement, relays, etc, processthe information and then use the result tocontrol physical devices such as motors,sirens, other relays, servo motors (up to 11)& two stepper motors.Hardware Features:Eight digital Outputs. Open collector, 500mA,33V max. Sixteen Digital Inputs. 20V max. Protection1K in series, 5.1V zener to ground. Eleven Analog Inputs. 0-5V, 10 bit(5mV/step.) One Analog Output. 0.2.5V or 0-10V. 8 bit(20mV/step.) Small plastic box (140mm x 110mm x35mm) with screen printed front & rear pan-els supplied. Connected to the PC by a 25 pin straightthrough cable. Software utilities & programming examplessupplied. Seven pages of documentation plusschematic. Requires heatsink (supplied.)


SERIAL ISOLATED I/O MODULE

Serial Isolated I/O Module. 8-Relay ModuleAn extension of our Kit 74, PC controlled 8-Relay Board with safe & protected 250Vswitching relays and added features. It is ina plastic case, latched relay operation,250V/12A certified relays switched by usingDinkle connectors (250V rated), and with 4external inputs. Supply 9-12Vdc, 500mA min.Programmable. Comes with case and endpanel pieces as shown in the photos. Usesserial port so it can be located over 100yards from the PC. After programming thePC can be disconnected.


02.55

USB EXPERIMENTINTERFACE BOARD

This kit is an interface board that has 5 digi-tal input channels and 8 digital output chan-nels. There are also two analogue inputsand two analogue outputs with 8 bit resolu-tion. The number of inputs/outputs can befurther expanded by connecting more (up toa maximum of four) cards to the PC's USBconnectors. All communication routines arecontained in a Dynamic Link Library (DLL).You may write custom Windows (98SE,2000, Me, XP) applications in Delphi, VisualBasic, C++ Builder or any other 32-bitWindows application development tool thatsupports calls to a DLL. The diagnostic soft-ware with its DLL is supplied with this kit.Features:Diagnostic / Test Software:

separate output / input testingclear all / set all functioncounter function on inputs 1 and 2 withadjustable debounce (max 2kHz dependson the total I/O load)analogue output set slidersanalogue input bar-graph indication·

Minimum System Requirements:Pentium class CPUUSB1.0 or higher connectionWindows 98SE or higher(Windows NT excluded)CD ROM player and mouse

Specifications:Conversion Time: 20ms per commandDiagnostic software with DLL included5 digital inputs (0= ground, 1= open)

(on board N.O. test buttons are provided)2 analogue inputs with attenuation / amplifi-cation option (test +5V reference provided)8 digital outputs with indicator LEDs

open collector type (max. 50V/100mA)2 Digital to Analogue Conversion (DAC)Analogue outputs:

Voltage Range: 0 to 5V (8 bit resolution)Output Resistance 1.5k Ohm

2 Pulse Width Modulation (PWM) outputs:Duty Cycle Range: 0 - 100%open collector type (max. 40V/100mA)

Power Supply: via USB connector: 70mARequires an USB Cable (AB176)Dimensions: 145 x 88 x 20mm

KIT ORDER CODE: AB029MODULE ORDER CODE: AB313


PC INTERFACE BOARD

This kit is used to enable a computer tocommunicate with the outside world. A com-puter is usually fitted with a keyboard, a dis-play and perhaps a mouse. If however it is to

be used in certain control applications, orcertain control functions are to be carriedour, then an interface is needed. This kit isan interface card that excels in its simplicityof use and installation. The card is connect-ed in a very simple way to the printer port(there is no need to open up the computer).Likewise there is no need to install an extraprinter port, even if a printer is to be used.The printer can be connected to the card inthe usual manner. Connection to the com-puter is optically isolated, so that damage tothe computer from the card is not possible.The Software works under Dos, Win3.11,Win95, Win98 or WinME. The card may becontrolled using Turbo Pascal, Qbasic,Visual Basic or C++ procedures. These pro-cedures are pre-programmed and are pro-vided along with test and example programson the supplied diskette. The card has 16optically isolated digital connections that canbe configured as either inputs or outputs (eg.6 inputs and 10 outputs). Furthermore, thecard has 9 analogue outputs, of which one ishigh precision, and 4 analogue inputs. thecard is simply connected to the printer port.If it is desired to use the interface card inde-pendently, without connecting to a computer,it can be done using the IndependentProgrammable Control Module (GC060). TheStepper Motor Card kit, (GC061), requiresthis interface card to operate. The digital out-puts can also be connected to the Universal16 Relay Card (GC055).Specifications:Supply Voltage: 230VacDigital outputs are optically coupled opencollector type: 50mA max. 30VdcDigital inputs are optically coupled: 5V/5mA,max. 20V/40mAAnalogue outputs:

8 outputs DAC1 to DAC8 with Resolution:64 steps

min. Output Voltage: 0.1V at 2mAmax. Output Voltage: 11.5V adjustable at

2mAResolution per step from 0.1 to 11.5V:

160mV +/- 90mV1 Precision Output DA1, with Resolution:

256 stepsmin. Output Voltage: 0Vmax. Output Voltage: 4.5V adjustable at

0.5mAResolution per step from 0 to 4.5V:

17.5mVAnalogue inputs:

4 analogue inputs AD1 to AD4 withResolution: 256 steps

min. Input Voltage: 0Vmax. Input Voltage: 5VInput Impedance: 50MohmResolution per step: 19.5mV

Communication Protocol: I²CbusLED indication for each I/O25 pin D-type connector for computer25 pin D-type connector for printerDimensions: 237 x 133mmHint: Resistor R19 must be changed:Replace the supplied 47 Ohm resistor with a100 Ohm (DB044) (not included).


INDEPENDENT PROGRAMMABLECONTROL MODULE

This programmable controller kit has to beused together with the PC Interface Board(GB693). If it is desired to use the interfaceboard independently, without connecting to acomputer, it can be done using this kit. It caneasily be connected to the PC interfaceboard, via 5 wire connections, and once pro-grammed by a computer it can be decoupledfrom the computer and the system can con-tinue to work independently. Programming ofthis kit is done using its own 64 instructionset, developed for this purpose, to write aprogram of around 2500 instruction. Theinstructions can be divided into the followinggroups:Branch: to skip part of the programTimer: to start and stop time delaysBit: to execute logical operations between

different bit variablesComparison: to compare analogue valuesByte: to process analogue variablesConversion: to convert bit variables to byte

variables and the other way roundThe program can only be stored if the backup batteries have been inserted in its holder.The latest software version for this kit isavailable from:http://www.velleman.beVelleman Product Code: K8001Please note that this kit is not suitable foruse with the stepper motor card (GC061).Specifications:Supply Voltage: 5Vdc (regulated)

from the PC Interface Board (GB693)Supply Current: 50mABattery Back Up: 3 x 1.5V AA-cells,

(AB748) (not included)Battery Back Up Current: 100mAIndependent control and monitoring of up tofour PC Interface BoardsCommunication Protocol: I²CbusTime bases of 1, 2, 4, 8, 16, 32 and 64sec.Eight programmable timersDelays up to 128sec. in steps of 0.5sec.Delays up to 9 hours 6 minutes in steps of

128sec.Own Instruction Set: 64 commandsInstruction Cycle Time: 145msec. (average)Volatile Memory: around 2500 instructionsProgram is written via any ASCII word

processor on a MS-DOS machineCompiler and programming software is

supplied for MS WindowsProgrammed by a computer printer port via

the required PC Interface Board (GB693)Dimensions: 73 x 149mm, 35mm heightNot Included:PC Interface Board Kit: (GB693)


02.56

4 CHANNEL COMPUTER SWITCH

This module enables one to switch up to 4different electronic devices independentlyusing a personal computer. It is connected tothe computer’s printer port, LPT1, and iscontrolled by the included software. The usermanual is also included on disk. An addition-al 25 pin D-type connector (JB048) isrequired for connecting the output wires. Themodule may only be operated with a DCvoltage supply and the total current of all 4outputs added together should not exceed2A. Voltages in the range 6 - 24Vdc can beswitched at the outputs. Use additionalrelays (DB003) and a 12Vdc supply (AA729)to switch larger load currents. 4 LEDs indi-cate which channel(s) are switched on. Themodule is electrically isolated from the com-puter by means of optocouplers.Dimensions: 73 x 56 x 29mmNot Included:25 pin D-type Connector: (JB048)4 Relays: (DB003)


SERIAL RELAY MODULE

AB608

This serial relay module has four relayswitches that can be switched on or off indi-vidually by a PC. It makes use of a pre-pro-grammed microcontroller. Data communica-tion is done via the serial port of a PC. Datamust be in ASCII character format that canbe sent with Hyper Terminal, a standardWindows communication program. Thismodule is ideal for programmers who wantto quickly test their own serial interface pro-grams or speed up the design process of aproduct. Computer software is not included.Specifications:Supply Voltage: 12VdcSupply Current: 200mA max.4 Indicator LEDs: each relay switch has one

red LED that shines when the respectiverelay is switched on

Number of Relay Switches: 4Output Relay Contacts: each relay is SPDTwith the following three switch contacts:

1 N.O. (normally open),1 N.C. (normally closed) and1 COM. (common)

Relay Contact Rating: max. 10A / 230VacData Format: ASCII charactersBaud-rate: 9600 bits per secondParity Bits: noneData Bits: 8Stop Bits: 1Dimensions: 62 x 90mm, 20mm height

Not Included:A free serial RS232 port on a PC andA serial cable 9-way plug to socket: (AB419)


8 CHANNEL COMPUTER SWITCH

This module enables one to switch up to 8different electronic devices independentlyusing a personal computer. It is connected tothe computer’s printer port, LPT1, and iscontrolled by the included software. The usermanual is also included on disk. An addition-al 25 pin D-type connector (JB048) isrequired for connecting the output wires. Theoutputs are 8 solid-state-relays that canswitch maximum 0.4Adc or 0.2Aac per chan-nel. The maximum voltage that can beswitched at an output is 40V (dc or ac). Useadditional relays (DB003) and a 12Vdc sup-ply (AA729) to switch larger load currents.The module is electrically isolated from thecomputer by means of optocouplers.Dimensions: 73 x 56 x 29mmNot Included:25 pin D-type Connector: (JB048)8 Relays: (DB003)


PARALLEL PORT PC RELAYBOARD WITH 8 RELAYS 12VDC

Do you have an old PC lying around thehouse which absolutely no one wants? Thenyou can convert it into a dedicated controller.Communicate with the real world via the par-allel printer port on you PC. Simply connectthe printer cable from the computer to theCentronics connector on the relay board.There are 8 relays, each capable of switch-ing 12VDC/10A or 240VAC/5A. Each relayhas a LED to indicate when it is operated.We provide two sets of complete, stand-alone software to control the relays: oneworks under DOS so you can write your ownbatch files to control individual relays, theother under Windows 3.1.Power supply: 12VDC


8-CHANNEL-RELAY BOARD

The device is suitable for switching differentappliances, lamps or motors by means of acomputer program. The relay points can be

loaded up to 3A each at maximum. Bymeans of the enclosed software it is possibleto switch on and off up to 8 different appli-ances at different times. It is also possible toprogramme certain switching sequences(also for several days) or attractive effectlighting for stages and discotheques! Themodule has to connected at the printer portof a standard PC. Diskette 3.5’ is enclosed.With DOS-software from AT286 and WIN 9Xsoftware from P100 on. Operating voltage of the relay board: 12VDC


SERIAL LCD MODULE

AB607

This serial LCD (liquid crystal display) mod-ule can be used to display alpha-numericalmessages that are sent from a PC. It makesuse of a pre-programmed microcontroller.Data communication is done via the serialport of a PC. Data must be in ASCII charac-ter format that can be sent with HyperTerminal, a standard Windows communica-tion program. This module is ideal for pro-grammers who want to quickly test their ownserial interface programs or speed up thedesign process of a product. Computer soft-ware is not included.Specifications:This module is powered by the serial portand does not require an external power sup-plyCurrent Consumption: 6mA max.Display:

16 characters x 2 line alpha-numeric LCD(it does not have a backlight)

Displayed Characters:This serial LCD module can display mostof the printing characters in the ASCII-table within the range: 20h to 7Eh

Implemented Control Characters:Clear Screen: 02hBell / Buzzer: 07hBackspace: 08hLine Feed: 0Ah

Data Format: ASCII charactersBaud-rate: 9600 bits per secondParity Bits: noneData Bits: 8Stop Bits: 1Dimensions: 38 x 100mm, 20mm heightNot Included:A free serial RS232 port on a PC andA serial cable 9-way plug to socket: (AB419)


INTRODUCTION TO LCDs

Introduction to LCDs. Learn how to connect

02.57

a 2x16 LCD to a PC parallel port. First thiskit will show you how to write keystrokesfrom the PC keyboard to display on the LCD.It will show you how to process this data(rotate the string left and right.) All the codeis provided. Second, there is an on-boardDS1620 to measure temperature. The tem-perature is displayed in F or C. Just press abutton to display either. With the DS1620you may set breakpoints to turn a thermostaton/off. We provide all the code to do this.Once the DS1620 is programmed it may beremoved and placed in another device fortemperature control. Many web referencesare given.


MICRO CONTROLLERSPIC EXPERIMENTATION

PROGRAMMERS

INTRODUCTION TO THE PIC16F84DEVELOPMENT

PROGRAMMER FOR PC

SB043

The PIC16F84 has fast become the entrypoint for hobbyists and beginners into microcontroller programming. This kit contains aPIC16F84A micro controller, that is used forprogramming, and all the components andhardware that are required for programmingand testing. The software is easy to use andis written for use on Windows 9x / NT / 2000operating systems. The software and 40page user manual is available on theInternet. Four detailed, fully commentedsource code examples are explained thatmake the 5 on-board LEDs flash in a varietyof ways.Specifications:Supply Voltage:

17 to 30Vdc or13 to 20Vac

Supply Current: 200mA max.Dimensions: 66 x 71mm, 20mm height


PIC PROGRAMMER ANDEXPERIMENT BOARD

This is a FLASH PIC programmer kit. It isideal for experimenting with flash PICs that

can be reprogrammed up to 1000 times. Ithas test push-buttons and LED indicators tocarry out educational experiments asdescribed in the programming examples.Software and one PIC16F627 is supplied.This kit has to be connected to the serialport of a computer.Minimum System Requirements:

IBM compatible PC, Pentium or betterWindows™ 95 / 98 / ME / NT / 2000 / XPCDROMfree serial RS232 port

Specifications:Supply Voltage: 15VdcSupply Current: 300mASupplied: Software to compile and programyour source code andone 18 pin PIC16F627 microcontrollersuitable for programming Microchip FLASHPIC microcontrollers like:8 Pin: PIC12F629, PIC12F67514 Pin: PIC16F630, PIC16F67618 Pin: PIC16F83, PIC16F84, PIC16F84(A),

PIC16F627, PIC16F627(A), PIC16F628,PIC16F628(A), PIC16F648(A), PIC16F818,PIC16F819

28 Pin: PIC16F870, PIC16F872, PIC16F873,PIC16F873(A), PIC16F876, PIC16F876(A)

and other FLASH PICs that fit the 4 socketsPCB Dimensions: 145 x 100mm

KIT ORDER CODE: AB310MODULE ORDER CODE: AB314


PIC PROGRAMMERS

ALL-FLASH, USB PORTPIC PROGRAMMER

This is a PIC programmer that is connectedto your PC using the USB port. This pro-grammer does NOT program non-Flashchips! Please make sure you know whichPIC chips are Flash (the ones with the 'F'!)and which are not. It can also be used forICSP programming via the supplied 5 wirecable. It makes use of the user interfacesoftware MicroPro.exe that has to be downloaded from the Internet.http://www.kitsrus.com/upuc.html. SomePICs that it can program: 12F629, 12F675,16F627, 16F627A, 16F628, 16F628A,16F630, 16F648A, 16F676, 16F684,16F688, 16F73, 16F74, 16F76, 16F77,16F737, 16F747, 16F767, 16F777, 16F83,16F84, 16F84A, 16F87, 16F88, 16F818,16F819, 16F870, 16F871, 16F872, 16F873,16F873A, 16F874, 16F874A, 16F876,16F876A, 16F877, 16F877A, 18F242,18F248, 18F252, 18F258, 18F442, 18F448,18F452, 18F458, 18F1220, 18F1320,18F2220, 18F2320, 18F4220, 18F4320.This kit is powered by the serial port anddoes not require an external power supply.Most components are already pre-soldered,but some thru-hole components should stillbe soldered onto the PCB. An USB Cable Aplug to B plug (AB176) is required. Pleasenote: although the ZIF socket (BB007) is notincluded, a 40 pin IC socket is included.Dimensions: 36 x 72mm, 16mm height


ICSP, FLASH, USB PORTPIC PROGRAMMER

AB613

This ICSP PIC programmer module is con-nected to your PC using the USB port. It canonly program FLASH PICs. It can programthe same PICs as the “ALL-FLASH USBPORT PIC PROGRAMMER” kit, (AB121). Itdoes not have a programming socket as itcan only be used for ICSP programming viathe supplied 5 wire cable. It is not the pur-pose of this module to teach ICSP. It makesuse of the user interface softwareMicroPro.exe that has to be down loadedfrom the Internet. This module is powered bythe serial port and does not require an exter-nal power supply. An USB Cable A plug to Bplug (AB176) is required.Dimensions: 31 x 57mm, 16mm height

MODULE ORDER CODE: AB613MANUFACTURED BY: DIY

ATMEL PROGRAMMERS

ATMEL 89CXXXX PROGRAMMER16VDC

This kit is a powerful programmer for theAtmel 8051 family of microcontrollers. It sup-ports the following devices: 89C1051,89C2051, 89C4051, 89C51, 89LV51, 89C52,89LV52, 89C55, 89LV55, 89S8252,89LS8252, 89S53 and 89LS53. The pro-grammer connects to the computer using aserial port. All the programming intelligenceis built into the programmer so you do notneed any special software to run it. Uses anyterminal emulator program capable of ASCIItext file transfer. On-board firmware supplied.Supply Voltage: 16VDCPCB size: 118x70mm


ATMEL AVR PROGRAMMER 12VDC

This kit is a powerful programmer for theAtmel AT90Sxxx (AVR) family of microcon-trollers. The following AVR devices are sup-

02.58

ported: AT90S1200, AT90S2313, AT90S4414and AT90S8515. It can also program theAT90S4434 and AT90S8535 using kit(AB120). It uses the serial port so it can useany terminal emulation software. W95/98use Hyperterminal. On-board firmware sup-plied.Supply Voltage: 12VDCPCB size: 109x68mm


ADAPTER BOARD FORAT90S4434 AND AT90S8535

This is the adapter board kit that enablesone to program the AT90S4434 andAT90S8535 using kit (EB223).


OTHER PROGRAMMERS

PROGRAMMER FOR 8 BITSERIAL EEPROMS

This PC parallel port programmer kit is usedto program 8-bit, serial EEPROMS. It pro-grams the following 24xxx and 93xxx seriesEEPROMS: (generic part numbers)2401, 2402, 2404, 2408, 2416, 2432, 2464,24128, 24256,9346, 9356, 9366, 9376, 9386You can use a 16 pin ZIF socket (not includ-ed) for volume programming.Supply Voltage: 9 - 12Vdc / 150mA adapterDownload the software from the Internet:“EEPROG.EXE” http://kitsrus.com/soft.htmlThe software is DOS based but will rununder Windows 3.1, Windows 9x andWindows NT4 (service pack 5).


BASIC STAMP 1STARTER KIT

BASIC Stamp microcontrollers, manufac-tured by Parallax, have been used by engi-neers and hobbyists since 1992. BASICStamps are microcontrollers (tiny computers)that are designed for use in a wide range ofelectronic and robotic projects that require alevel of intelligence. Programming is done in PBASIC specificallyfor the BASIC Stamps. This programminglanguage is simple and easy to learn. Itincludes many BASIC instructions like:GOTO, FOR...NEXT, IF...THEN, etc. PBASICalso includes unique instructions like: PWM,SERIN, COUNT, etc.

BASIC Stamp1 IC.The BASIC Stamp 1 starter kit is built aroundthe BS1-IC (BASIC Stamp 1 IC). The BASICStamp IC contains a BASIC Interpreter chip,internal memory (RAM and EEPROM), a 5Vregulator, a number of general-purpose(TTL-level: 0 - 5 volt) I/O (input / output) pinsand a set of built-in commands for mathe-matical and I/O functions.

BASIC Stamp Super Carrier.The picture above shows the BASIC StampSuper Carrier Board with the BS1-IC proper-ly inserted into the socket. This board pro-vides prototyping space for simple or moder-ate circuits. It has a 3-pin programming con-nector for conneting to a personal computerfor programming the BS1-IC. On-board resetbutton, 9V-battery clip, DC-power connector,5V-regulator and power indicator LED.Includes:BASIC Stamp 1 Module (BS1-IC)BASIC Stamp Development Software on CDBASIC Stamp ManualBASIC Stamp Super Carrier BoardBASIC Stamp 1 Serial AdapterMinimum System Requirements:IBM compatible PC, Windows 95, 98,(Win2000 or NT possible),16MB of RAM1MB of available hard drive spacemouse, CD-ROM andfree printer port LPT1, LPT2 or LPT3 (DB25)Specifications:Supply Voltage: 6 - 15VdcProgramming Language: PBASICNumber of PBASIC Commands: 32Microcontroller: Microchip PIC16C56AProcessor Speed: 4 MHzInstruction Rate: 2000 instructions per sec.Program Size: 80 instructionsNumber of I/O Pins: 8PC Interface: Serial Printer Port connectionText Editor Windows Software: Stampw.exeDimensions: 78 x 107mm, 30mm heightRequired: (not included)9V-battery (EB160) or230Vac to 6 - 15Vdc Power Adapter (AA729)

together with one DC-power plug (AA582)MODULE ORDER CODE: AB697

MANUFACTURED BY: PARALLAX

BASIC STAMP 2STARTER KIT

BASIC Stamp microcontrollers, manufac-tured by Parallax, have been used by engi-neers and hobbyists since 1992. BASICStamps are microcontrollers (tiny computers)that are designed for use in a wide range ofelectronic and robotic projects that require alevel of intelligence. Programming is done in PBASIC specificallyfor the BASIC Stamps. This programminglanguage is simple and easy to learn. Itincludes many BASIC instructions like:GOTO, FOR...NEXT, IF...THEN, etc. PBASICalso includes unique instructions like: PWM,SERIN, COUNT, etc.

BASIC Stamp2 IC.The BASIC Stamp 2 starter kit is built aroundthe BS2-IC (BASIC Stamp 2 IC). The BASICStamp IC contains a BASIC Interpreter chip,internal memory (RAM and EEPROM), a 5Vregulator, a number of general-purpose(TTL-level: 0 - 5 volt) I/O (input / output) pinsand a set of built-in commands for mathe-matical and I/O functions.

Board of Education.The picture above shows the Board ofEducation programming board with the BS2-IC properly inserted into the socket. Thisboard provides a small breadboard for quick-ly prototyping simple or moderate circuits. Ithas a DB9 programming connector for con-neting to a personal computer for program-ming the BS2-IC. On-board reset button, 4servo connectors, 9V-battery clip, DC-powerconnector, 5V-regulator and power LED.Includes:BASIC Stamp 2 Module (BS2-IC)

02.59

BASIC Stamp Development Software on CDBASIC Stamp ManualBASIC Stamp Board of EducationSmall Component Pack10 Jumper wiresSerial CableMinimum System Requirements:IBM compatible PC, Windows 95, 98,(Win2000 or NT possible),16MB of RAM1MB of available hard drive spacemouse, CD-ROM andfree serial port (DB9)Specifications:Supply Voltage: 6 - 15VdcProgramming Language: PBASICNumber of PBASIC Commands: 42Microcontroller: Microchip PIC16C57CProcessor Speed: 20 MHzInstruction Rate: 4000 instructions per sec.Program Size: 500 instructionsNumber of I/O Pins: 16PC Interface: Serial Port DB9 connectionText Editor Windows Software: Stampw.exeDimensions: 78 x 107mm, 30mm heightRequired: (not included)9V-battery (EB160) or230Vac to 6 - 15Vdc Power Adapter (AA729)together with one DC-power plug (AA582)

MODULE ORDER CODE: AB696MANUFACTURED BY: PARALLAX

(IR)REMOTE CONTROLLERS

INFRA-RED TOGGLE SWITCH 8-15VDC

This is an IR (infra-red) toggle switch thatwill work with any button on any modern IRremote control such as a TV IR remote con-trol unit. Press any button on the IR remoteand the (SPDT) 1A on-board relay will switchon. Press any button later and the relay willswitch off. The on-board Kodenshi IR receiv-er module detects IR light that is on-off-mod-ulated at 37.9kHz. One D-type flip-flop isconfigured as a toggle flip-flop. This toggleflip-flop does not only perform the latchingfunction of the relay, but also toggles therelay between an on or off state.Specifications:Supply Voltage: 8 to 15VdcSupply Current: 40mA max.Dimensions: 30 x 75mm, 15mm height


INFARED DETECTOR

With the aid of this circuitry it is made possi-ble to carry out functional tests of infraredremote controls used in TV-sets and videodevices, etc. Whenever there is radiation ofinfrared beams on the Special-Sensor, the

LED will light up and indicate that theinfrared remote control is operated. Asaccessories is available our kit FB631 RelayCard. This could be connected with theInfrared Detector and it is then possible toswitch through the relay contact loads up to6 A. Operating voltage: 9VDC


IR REMOTE CHECKER

This kit makes it easy to check that an IR(infra red) remote operates properly. Simpleoperation: point the remote at this kits IRsensor and push any button. 4 FlashingLEDs indicate remote operation.Specifications:Power Supply: 9V battery (not include)low power consumptionDimensions: 55 x 30 x 33mm


2-CHANNEL IR TRANSMITTER

This 2-channel, keychain-style, IR transmit-ter kit is used to control the 2-Channel Infra-red Remote Receiver (AB298). Easy channelconfiguration using the 2 push-button switch-es, there are no jumpers required. Specifications:Power Supply: 12V (A23) battery (DB247)

(not included)Two ChannelsTransmitter Range: max. 15m

(only when used indoors)Infra-Red Light Code TransmissionCoding: 16 possible channelsSingle LED: transmit-indicationDimensions: 60 x 40 x 14mm


2-CHANNEL IRREMOTE RECEIVER

This is a 2-channel IR (infra-red) remotereceiver kit with a program push-buttonswitch. Any of the following IR transmitterscan be used to control this kit:

2-Channel IR Transmitter (AB299) or15-Channel IR Transmitter (AB305) and15-Channel IR Remote Stick (AB307)

The 2 output relay switches can be pro-grammed individually for toggle or pulseoperation. Settings are stored in EEPROM.Specifications:Power Supply: 12VdcSupply Current: 75mA max.Two ChannelsInfra-Red Light Code Receiver3 LED Indicators:

2 LEDs: indicates which relay(s) is on1 LED: programming and signal receive

2 Output Relays: 1A SPST (COM, NO)momentary or toggle operation setting

Range: 15m max. (when used indoors)Dimensions: 45 x 50mm, 15mm height


12 CHANNEL IR REMOTERELAY BOARD 12VDC

This kit consists of a commercial 14-buttoninfra-red (IR) remote control unit and a 12relay IR receiver board. This kit makes itvery easy to add an IR remote control sys-tem to any project or existing equipment.One button is assigned to each relay outputwith its own indicator LED. Outputs can beset for momentary or toggling operation.Specifications:Power for IR remote: 2 x 1.5V AAA cellsSupply Voltage: 12Vdc / 500mA adapterSupply Current: 400mA max.Dimensions: 122 x 113 x 20mm

KIT ORDER CODE: AB127 MANUFACTURED BY: DIY

02.60

IR REMOTE CONTROLLERAND DECODER IC

This kit makes it easy to build your own IR(infra red) remote operated system.This kit contains:A commercial 14-button remote control unitthat transmits digital coded IR pulses when abutton is pressed.A 3-pin IR receiver module that converts themodulated 38kHz IR signal into electric digi-tal data pulses.A pre-programmed microcontroller that isused to decode the received digital datapulses. It sets only 1 of its 14 output pinsactive low when receiving a valid code.All the required components for the micro-controller are also supplied:A 12 MHz ceramic resonator used for theoscillator, resistor, capacitor and diode forthe power-on reset circuit andtwo 10k Ohm pullup resistors.A sample application / test circuit diagram, a330 Ohm resistor and a LED are also sup-plied for testing.Note that the PCB is not supplied, it is up tothe user to test on breadboard and maketheir own PCB. Ideal for practical classes!Specifications:Power Supply: Remote Control: 2 x 1.5V AAA cells not inclReceiver IR module and decoder IC: 5Vdc


15-CHANNEL IR TRANSMITTER

This is a 15-channel IR (infra-red) transmitterkit. It has 10 rubber keypad push-buttonswitches. 4 Addresses allow the use of up to4 receivers in 1 room. For example 3 trans-mitters can access 45 channels in 1 room.Features:It can be used with:2-Channel IR Remote Receiver (AB298),15-Channel IR Receiver (AB306),IR Remote Controlled Dimmer (GC053) and1-Channel IR Receiver (GC054).Specifications:Power Supply: 3 x 1.5V AAA-cells (not

included)Range: 20m max. using IR receiver (AB306)

(only when used indoors)Up to 15 channels can be operatedRubber KeypadLED Function Indication

Dimensions: 150 x 58 x 20mmKIT ORDER CODE: AB305


15-CHANNEL IR REMOTE STICK

This is a 15-channel IR (infra-red) transmitterkit. Its enclosure has a sleek design. It has 2push-button switches. It can be set to 1 of 3addresses, allowing the use of up to 3receivers in 1 room. Consequently 3 trans-mitters can access 45 channels in 1 room.The built-in ‘all clear’-function allows the userto turn-off all channels of the current addressat the same time. You can operate theremote and select the correct channel evenin total darkness.Features:It can be used with:2-Channel IR Remote Receiver (AB298),15-Channel IR Receiver (AB306),IR Remote Controlled Dimmer (GC053) and1-Channel IR Receiver (GC054).Specifications:Power Supply: 2 x 1.5V AAA-cells (not

included)Range: 20m max. using IR receiver (AB306)

(only when used indoors)Up to 15 channels can be operatedSingle push-button channel selection and

operationLED Function IndicationDimensions: 160 x 27 x 24mm


15-CHANNEL IR RECEIVER

This is a 15-channel IR (infra-red) receiverkit.Features:It can be controlled by:15-Channel IR Transmitter (AB305)15-Channel IR Remote Stick (AB307)Its 15 open-collector outputs can be connect-ed to the following relay cards:4 Relay Card (GC058)8-Channel Relay Card (AB308)Universal Relay Card 8 Relays (GC056)Universal Relay Card 16 Relays (GC055)Specifications:Power Supply: 2 x (6 to 12)Vac or

8 to 14VdcSupply Current:

Standby Current: 10mAAll Outputs On: 150mA

Outputs: (each is pulled active low when on)15 NPN Bipolar Junction Transistor Open-Collector Screw Terminals Connections

Current Rating per Output: max. 50mA / 50VLED Indication for each outputTransmitter - Receiver Range: 20m max.Operating Modes: (4 modes)

15 independent outputs or15 rotary outputs or7 independent and 8 rotary outputs or7 rotary outputs and 8 rotary outputs thatare independent of each other

Address Selection: (3 addresses)allows the use of up to 3 receivers in oneroom using 3 transmitters, like (AB305) or(AB307), that should each be set for usewith a specific receiver

Dimensions: 71 x 114mmKIT ORDER CODE: AB306


IR REMOTE CONTROLLED DIMMER

This is a single channel IR dimmer kit thatcan be used together with: (not included)15-Channel IR Transmitter (AB305) or15-Channel IR Remote Stick (AB307)This kit can be set to receive 1 of 15 trans-mitter codes so that 15 dimmers can beoperated, independently of each other, in thesame room. It has two memories to preservedistinct dimmer presettings. A front plate witha push-button panel key is supplied. Thanksto its compact design this kit fits into a stan-dard light switch housing. Please note thatthis dimmer is not suitable for halogen lights.Specifications:Power Supply: 220VacSuppressed TRIAC Output: 2A max.Power Output: 440 Watt max.Channels: select only one of 15 channelsAddresses: 4Memory: for 2 dimming, or on/off, statesPanel Push-button: for local dimmer controlDimmer can be set for:

dimming to adjust brightness of bulbs onlytoggle, change on/off state with each presspulse output, only on as long as you press,

IR Transmitter-Receiver Range: 7m max.Front Panel Dimensions: 85 x 85mm


1-CHANNEL IR RECEIVER

This is a single channel IR receiver kit thatcan be used together with: (not included)15-Channel IR Transmitter (AB305) or15-Channel IR Remote Stick (AB307)This kit can be set to receive 1 of 15 trans-mitter codes so that 15 receivers can beoperated, independently of each other, in thesame room. It has a relay output switch.Specifications:Power Supply: 220Vac

02.61

Channels: select only one of 15 channelsAddresses: 42 Memories: each saves an on or off state1 Push-button: for local controlReceiver can be set to:

toggle, change on/off state with each presspulse output, only on as long as you press,

IR Transmitter-Receiver Range: 9m max.LED Indicator: shines when the relay is onOutput Relay: SPDT, N.O., N.C., COM with

max. 5A / 220Vac contact ratingNoise Suppressor for the relay contactsDimensions:Part 1: 37 x 48mm, 17mm heightPart 2: 47 x 48mm, 25mm height


10-CHANNEL, 2-WIREREMOTE CONTROL

This kit allows you to control up to 10devices using only 2 wires, over a long dis-tance, between the sender and receiver.Microprocessor controlled. The 10 inputs, atthe sender, can be controlled with push-but-tons, switches or open collector outputs fromanother device. The receiver has 10 opencollector outputs that allow you to directlycontrol externally connected relays. Screwterminals are used for all input and outputconnections. This kit can be used to reducethe number of wires between the kits:User-definable 8-Chan.Touch Panel (AB304)and the 8-Channel Relay Card (AB308)Specifications:Supply Voltage: 12 - 15V AC or DCNumber of Channels: 102-Wire Connection Range: 50mInput Impedance: 10 kOhmOne Input per Channel:

The input has to be pulled active low,(connected to the negative supply rail), toactivate the corresponding indicator LEDand open-collector output on the receiveroutput is off If the input is not connected

Open Collector Outputs: 10 outputsEach output can sink max. 100mA / 50V

Dimensions:Sender: 70 x 50mm, 16mm heightReceiver: 103 x 50mm, 25mm height


(RF)REMOTE CONTROLLERS

2-CHANNEL RF CODE-LOCKREMOTE TRANSMITTER

This is a keychain-style RF transmitter kitwith 2 push-button switches. It can be usedto control the “2-Channel RF Code-LockRemote Receiver” kit (AC908) or the assem-bled 2-channel receiver module (AB319).Specifications:Power Supply: 12V (A23) battery (DB247)

(not included)Two ChannelsOperating Frequency: 433MHzSAW resonator is usedRange: 30m max. (only when used outdoors)Approved Design: according to

I-ETS 300 220Coding: generates unique 32-bit codemore than 1,000,000,000 unique codesThe code is easily changedThere are no jumpers requiredSelect continuous or 'burst' transmissionSingle LED on / off and battery indicationDimensions: 63 x 40 x 16mm


2-CHANNEL RF CODE-LOCKREMOTE RECEIVER

This is a two channel RF code-lock receiverkit that works with random code.It can be controlled by the “2-Channel RFCode-Lock Remote Transmitter” kit (AC916)or the assembled 2-channel transmitter mod-ule (AB318).This kit has to be used together with at leastone of these transmitters to form the ideal 2-channel remote control system for all kindsof applications. Some applications: garagedoor controller, car alarms and / or centraldoor locking systems, as well as for wirelessoperation of in-door and out-door lighting,etc. It is possible to use several transmitterswith one receiver and the other way round.Specifications:Supply Voltage: 9 to 12V AC or DCSupply Current: 100mA max.Two Channels with relay output switchesOperating Frequency: 433MHzRange: 30m max. (only when used outdoors)Can be programmed to use any of more

than 1,000,000,000 unique codesCan learn 32-bit transmitter codesStore up to 31 transmitter codes in memoryProgramming: using ‘setup’ button and LEDs4 LED Indicators:

2 to show relay on / off,2 for mode and timer functions

2 Output Relays: 3A SPDT (COM, NO, NC)select pulse or toggle operation per output

Pulse Mode: set either of the two relay out-puts by pressing the corrosponding transmit-ter button or set both outputs simultaneouslyby pressing the two transmitter buttons atthe same time.Selectable Output Relay Timers: 0.5s, 5s,

30s, 1min, 5min, 15min, 30min and 60minDimensions: 82 x 100mm, 25mm heightRequired: (not included)keychain RF transmitter:

kit (AC916) or module (AB318)KIT ORDER CODE: AC908


RF 2-CHANNEL RELAY SWITCH

This kit is a 2-channel version of (AB139)with a 2 button key-ring RF transmitter and 2relay receiver board. This RF remote controlsystem makes use of the rolling code dataencryption technique that is close-to-impos-sible to brake. This high-security remote con-trol system is ideal for use with alarm sys-tems.Specifications:Power Supply:

Transmitter: 12V battery (A23) (DB247)Receiver: 12Vdc / 200mA

Pre-built transmitter and receiver modulesOperating Frequency: UHF 433MHzRange: 100m max.Rolling Code Operation: 7.3 x 1019 codesChannels: 2 button transmitter, 2 relay

receiver board with 2 indicator LEDsOutput Relays: 2A SPDT (COM, NO, NC)

momentary or toggle operation settingDimensions: 61 x 85 x 25mm


RF 4-CHANNEL RELAY SWITCH

This kit uses a 4 button (4-channel) key-ringRF transmitter and 4 relay receiver board.This RF remote control system makes use ofthe rolling code data encryption techniquethat is close-to-impossible to brake. Thishigh-security remote control system is idealfor use with alarm systems.Specifications:Power Supply:

Transmitter: 12V battery (A23) (DB247)

02.62

Receiver: 12Vdc / 200mAPre-built transmitter and receiver modulesOperating Frequency: UHF 433MHzRange: 100m max.Rolling Code Operation: 7.3 x 1019 codesChannels: 4 button transmitter, 4 relay


momentary or toggle relay operationDimensions: 78 x 85mm, 25mm height


ROLLING CODE 10-CHANNELRADIO CONTROL

AB682

This kit uses a 4 button key-ring RF trans-mitter and 10 relay receiver board. This RFremote control system makes use of therolling code data encryption technique that isclose-to-impossible to brake. This high-secu-rity remote control system is ideal for usewith alarm systems. The key-ring transmit-ter’s 4 buttons can be pressed in ten differ-ent combinations:1) press a single button, 1 of 4 buttons, at atime in order to control 4 channels2) press two of the 4 buttons simultaneouslyat a time, for 1 of 6 different combinations, inorder to control another 6 channels.Specifications:Power Supply:

Transmitter: 12V battery (A23) (DB247)Receiver: 12Vdc / 250mA

Pre-built transmitter and receiver modulesOperating Frequency: UHF 433MHzRange: 100m max.Rolling Code Operation: 7.3 x 1019 codesChannels: 4 button transmitter, 10 relay


momentary or toggle relay operationDimensions: 85 x 103mm, 25mm height


8-CHANNEL RFREMOTE CONTROL

This is a 8-channel RF (radio frequency)transmitter kit. It has 10 rubber keypad push-button switches. 8 Addresses allow the useof up to 8 receivers in 1 room. This kit isused to control the 8-Channel Relay Card(AB308) (not included). The transmitter hasan ‘all clear’- function that simultaneouslyswitches off all the relays on the receiver. Italso has a momentarily (pulse) or toggle(latching) mode for each key.Specifications:Power Supply: 3 x 1.5V AAA-cells (not

included)Range: 50m max. (only when used outdoors)Operating Frequency: 433MHzUp to 8 channels can be operatedRubber KeypadLED Function / Mode IndicationDimensions: 150 x 58 x 20mm


8-CHANNEL RELAY CARD

This 8-channel relay card kit can be used inseveral ways:1) each of the 8 relays can be controlled byan open-collector output or N.O. (normallyopen) switch at each of the 8 inputs. This kitdoes not have to be connected to any com-puter when it is used in this way.2) the relay card can be remote controlledusing the 8-Channel RF Remote Control kit(AB309) together with the 433MHz ReceiverModule (AB342) ( both are not included) or3) the relay card can be remote controlled bya computer, using the RS232 protocol, via 2wires.Since the card can be addressed usingRS232 commands, you may write customapplications in any programming languageon any platform. Test software can be down-loaded from the Velleman web site at:http://www.velleman.beVelleman Product Code: K8056DIAGNOSTIC / TEST SOFTWARE:(only required if one wants to control this kitby using a computer)1) separate relay on/off test with momentarily(pulse) or toggle (latching) function2) clear all or set all relays function3) address selection: up to 255 addresses,one per relay card, can be selected4) emergency stop switches off all the relayson a relay cardMinimum Computer System Requirements:

Pentium class CPUWindows 95 or highermouse and free RS232 port

Specifications:Power Supply: 12Vac or

15 - 17VdcSupply Current: 500mAUnregulated Output Voltage: 12Vdc / 200mANumber of Relays: 810 Indicator LEDs:

1 Power LED: shines if card is powered1 Data In LED: indicates incoming data8 LEDs: one for each output relay switch,that shines to indicate which relay(s) is on

Input Impedance: 300 OhmInput Current drawn for Relay On: 50mAOne Input per Relay Output Switch:

The input has to be pulled active low,(connected to the negative supply rail), toactivate the corresponding indicator LEDand output relay switchRelay is off If the input is not connected

RS232 Input:to drive the card with computer or terminalbaud rate: 2400, no parity, 8 data bits,

1 stop bitInput impedance: selectable 1 or 10 kOhm

RF Control: (this function requires):433MHz Receiver Module (AB342) with8-Channel RF Remote Control (AB309)

Output Relay Contacts: each relay is SPST(single pole single through) with Contacts:1 x N.O. (normally open) and1 x COM. (common)

Output Contact Rating: max. 5A / 230VacRelay outputs are all transient suppressedDimensions: 160 x 107mm, 30mm height


RELAY UNITS ANDSWITCHES

TOGGLE FLIP-FLOP SWITCH12V / 5A RELAY CONTACTS

This electronic switch is either on or off andchanges state with every press of a pushbutton. The on-board relay can switch cur-rent loads up to a maximum of 5 Amps12VDC. An on-board fuse is included for cur-rent protection. The switch is controlled by aremote N.O. push button switch (not includ-ed) (code: HB209). An on-board red LEDindicates the state of the relay. A remote indi-cation LED (included) can be connecteddirectly to the board. It requires a 12VDC or16-26VAC power supply.


TOGGLE FLIP-FLOP SWITCH220V / 10A RELAY CONTACTS

This electronic switch is either on or off andchanges state with every press of a pushbutton. The on-board relay can switch cur-rent loads up to a maximum of 10 Amps220VAC. An on-board fuse is included forcurrent protection. The switch is controlledby a remote N.O. push button switch (notincluded) (code: HB209). An on-board redLED indicates the state of the relay. Aremote indication LED (included) can beconnected directly to the board. It requires a12VDC or 16-26VAC power supply.


02.63

RELAY BOARD

Quite often the hobbyist needs to use arelay. To fill this need this simple kit wasmade consisting of 1 SPDT, (single poledouble throw), electro-mechanical relay, 1PCB, 1 back-EMF protection diode and 5screw terminal blocks. The input to the 12Vrelay coil is electrically isolated from therelay output switch contacts.Specifications:Relay Coil Input Voltage: 12Vdc for relay on

connect +12V to ‘+’ and 0V to ‘-’ terminalInput Impedance: 400 OhmRelay Coil Current Consumption: 30mAOutput Relay Contacts: SPDT with contacts

1 x N.O. (normally open),1 x N.C. (normally closed) and1 x COM. (common)

Output Contact Rating: max. 2A / 230VacDimensions: 31 x 37mm, 25mm height


RELAY BOARD FOR 2X 1AMINIATURE RELAYS

Quite often the hobbyist needs to use a com-pact, low power, dual relay unit. This simplekit is ideal to fill these needs. It consists of 2SPDT relays, 1 PCB, 2 back-EMF protectiondiodes and 10 screw terminal blocks for con-necting the input / output signals. The inputsto the 12V relay coils are electrically isolatedfrom the relay output switch contacts.Specifications:Relay Coil Input Voltage: 12Vdc for relay on

connect +12V to ‘+’ and 0V to ‘-’ terminalInput Impedance: 700 OhmCurrent Consumption per Relay Coil : 18mAOutput Relay Contacts: two SPDT relays

Total number of Contacts:2 x N.O. (normally open),2 x N.C. (normally closed) and2 x COM. (common)

Output Contact Rating: max. 1A / 30VDimensions: 30 x 53mm, 15mm height


RELAY CARD 12V

This is a transistor switched relay card kit.The SPST (single pole single throw) relay isswitched on by any weak, positive going,input DC-signal of approximately 5mA ormore. It is ideal for use as a switching ampli-fier for other kits, which only have a LED(light emitting diode) as output. The inputsignal is electrically isolated from the outputrelay switch contacts.Specifications:Supply Voltage: 12VdcSupply Current: 80mA max. (relay on)Input Impedance: 330 OhmInput Signal Voltage Range: 3 - 12VdcInput Current: 5mA min.Output Relay Contacts: SPST with contacts

1 x N.O. (normally open) and1 x COM. (common)



12V AC/DC RELAY12V/5A RELAY CONTACTS

This relay module consists of a 12V pcbmounted relay with back-EMF diode protec-tion and five pcb mounted screw terminals.Two screw terminals, marked ‘VIN’, are usedfor connecting 12V to the relay coil. Threescrew terminals are used for the relay con-tact connections that are marked ‘N.C’.,‘N.O’. and ‘COM’.Specifications:Relay Coil Input Voltage: 12Vac or 12VdcRelay Coil Input Current: 37mA at 12VacRelay Contact Current Rating: 5ARelay Contact Voltage Rating: 12VDimensions: 30 x 50mm, 20mm height


12V AC/DC RELAY220V/10A RELAY CONTACTS

(FUSED)

This relay module consists of a 12V pcbmounted relay with back-EMF diode protec-tion and five pcb mounted screw terminals.Two screw terminals, marked ‘VIN’, are usedfor connecting 12V to the relay coil. Threescrew terminals are used for the relay con-tact connections that are marked ‘N.C’.,‘N.O’. and ‘COM’. An on-board fuse is usedfor protecting the relay contacts.Specifications:Relay Coil Input Voltage: 12Vac or 12VdcRelay Coil Input Current: 45mA at 12VacRelay Contact Current Rating: 10ARelay Contact Voltage Rating: 220VDimensions: 30 x 60mm, 20mm height


RELAY SWITCH MAINS POWER

Many electronic projects use a low-voltagecircuit that has to control mains voltage,(230Vac), electrical devices and appliances.Well this kit is the answer! It will take a +12V,high or low going, input signal to switch onthe output relay that can switch 5A / 240Vacloads. One DPDT (double pole double throw)relay is used so that both sides of the mainssupply can be switched simultaneously. Theinput signals are electrically isolated from theoutput relay switch contacts. Screw terminalsare used for easy connections.Specifications:Supply Voltage: 12VdcSupply Current: 50mA max. (relay on)Input Impedance: 8.2 kOhmTwo Inputs for Relay Output Switch:

Input step-down is pulled active low toswitch relay on, input range 0 - 6VdcInput step-up is pulled active high toswitch relay on, input range 6 - 12VdcRelay is off If the inputs are not connected

Output Relay Contacts: one DPDT relayTotal number of Contacts:2 x N.O. (normally open),2 x N.C. (normally closed) and2 x COM. (common)

Output Contact Rating: max. 5A / 230VacFuse Protection: 20 x 5mm holder 5A fuseLED-indicator: shines when the relay is onDimensions: 51 x 67mm, 25mm height


DUAL RELAY BOARDTRANSISTOR SWITCHED

This kit has two identical SPDT (single poledouble throw) relays. Each relay has two lowcurrent, TTL logic level input buffers. Theinput signals are electrically isolated from theoutput relay switch contacts. Screw terminalsare used for easy connections.Specifications:Supply Voltage: 12VdcSupply Current: 110mA max. (both relays on)Input Impedance: 10 kOhmTwo Inputs per Relay Output Switch:

Input L has to be pulled active low toswitch relay on, input range 0 - 0.8VdcInput H has to be pulled active high toswitch relay on, input range 2.4 - 12VdcRelay is off If the inputs are not connected

Output Relay Contacts: two SPDT relaysTotal number of Contacts:2 x N.O. (normally open),2 x N.C. (normally closed) and2 x COM. (common)

02.64



4 RELAY CARD

Connecting a number of relays to the out-puts of an electronic network may seem verysimple, but in reality it might create someproblems regarding the cabling. This 4 relaykit is a compact alternative. It has 4 inputs,one for each transistor switched SPDT relay.Each relay is activated by a negative goinginput signal. Can be controlled by a devicewith open-collector outputs. The input sig-nals are electrically isolated from the outputrelay switch contacts.Specifications:Power Supply: 9 - 10VdcFor 12V Supply: replace

R1, R2, R3, R4 with 82 Ohm: 4 x (AA096)For 6V Supply: replace

R1, R2, R3, R4 with wire jumpersSupply Current: 340mA max. (4 relays on)4 Indicator LEDs: shine when relay is onInput Impedance: 820 OhmOne Input per Relay Output Switch:

The input has to be pulled active low,(connected to the negative supply rail), toactivate the corresponding indicator LEDand output relay switchRelay is off If the input is not connected

Output Relay Contacts: four SPDT relaysTotal number of Contacts:4 x N.O. (normally open),4 x N.C. (normally closed) and4 x COM. (common)



UNIVERSAL RELAY CARDWITH 16 RELAYS

This 16 relay card kit has screw terminals forall connections and a PCB mount powersupply transformer is also supplied. The 12Vpower supply can be used to power otherelectronic devices. Every relay output can beequipped with a noise suppressor network.16 DIP-switches are supplied to allow manu-al control of the relays in case of mainte-nance work. The relay card can be con-trolled with TTL / CMOS logic levels whenusing the 2 supplied ULN2803 Darlingtontransistor array ICs. It can also be controlledby open-collector outputs, but then these ICs

must not be mounted. The input signals areelectrically isolated from the output relayswitch contacts. It is ideal for improving theoutput capabilities of the following kits:PC Interface Board (GB693)15-Channel IR Receiver (AB306)10-Channel 2-Wire Remote Control (GC057)Specifications:Power Supply: 230VacPower Consumption: max. 12WOutput Voltage: 12Vdc / 250mA max.Number of Relays: 16Manual Control DIP-Switches: 1617 Indicator LEDs:

1 Power LED: shines if 230V is connected16 LEDs: one for each output relay switch,that shines to indicate which relay(s) is on

Input Impedance:When using ULN2803 ICs: 2.7 kOhmWithout ULN2803 ICs: 263 Ohm

One Input per Relay Output Switch:When using ULN2803 ICs:

Input accepts TTL / CMOS voltage levelsRelay On: input range 3 - 30VdcRelay Off: input range 0 - 0.8Vdc

Without ULN2803 ICs:The input has to be pulled active low,(connected to the negative supply rail), toactivate the corresponding indicator LEDand output relay switchRelay is off If the input is not connected

Output Relay Contacts: each relay is SPDT(single pole double through) with Contacts:1 x N.O. (normally open),1 x N.C. (normally closed) and1 x COM. (common)

Fuse Protection: 20 x 5mm 250mA fuseOutput Contact Rating: max. 5A / 230VacDimensions: 150 x 212mm, 55mm height


UNIVERSAL RELAY CARDWITH 8 RELAYS

This 8 relay card kit is a down graded ver-sion of the Universal Relay Card with 16Relays (GC055). It has 8 SPDT 5A / 230Vacoutput relays with screw terminals for each.It has a PCB mount transformer.Specifications:Power Supply: 230Vac / 12WOutput Voltage: 12Vdc / 250mA max.Number of Relays: 8Fuse Protection: 20 x 5mm 250mA fuseDimensions: 150 x 212mm, 55mm height


MASTER-SLAVESWITCHING MODULE 230VAC

This module is useful for switching on or offa secondary device after the primary 230Vacdevice (master) has been powered. Forexample: A vacuum cleaner (secondary) isautomatically switched on via the module’srelay switch when switching on a drillingmachine (primary). The vacuum cleaner willbe switched off automatically after the drillingmachine has been switched off. This modulehas to be connected in a power cable of the230Vac primary device. This module sensesthe electric current conducting through theconnected 230Vac primary load and thenswithes the built in, potential-free, SPDTrelay switch. This module can also be usedas an automatic safety-cutoff of a secondarydevice when powering the primary device.Specifications:Operating Voltage: 230Vac / 410VacOutput Relay: with COM.,NO.,NC. (SPDT)Switching Capacity: max. 6A / 230Vac and

max. 10A / 24VacDimensions: 65 x 67 x 37mm


AC POWER SLAVE SWITCH

This kit is useful for activating a secondary“slave” device when a primary “master”230Vac device starts up. This device can beused for automatic connection of a vacuumcleaner when switching on a machine orautomatic safety-cutoff when starting anoth-er. This module senses the current conduct-ing to the connected 230Vac primary loadand then swithes the built in, potential-freerelay switch. The secondary device will auto-matically disconnect a short while after theprimary device has been disconnected. Thedevice is protected against current variationsin the primary load.Specifications:Operating Voltage: 230VacOutput Power Rating for Primary Device:

400W / 230Vac / 2A max.Detects small resistive and inductive loadsAdjustable SensitivityMinimum Detectable Primary Load: 5WOutput Relay for Secondary Device:

(SPST) with COM. and NO contactsRelay Switching Capacity: max. 5A / 230Vac

for max. 1100W / 230V secondary loadOutput Relay contacts are protected againstvoltage spikes that are caused by the switch-ing of inductive loads

02.65

2 Power Indicator LEDs: Master and SlaveDimensions: 83 x 101 x 44.5mmModule Dimenions: 106 x 101 x 44.5mmWeight: 187g



FLUID LEVEL SENSORS

Note: Never use liquid sensors inan inflammable enviroment, likeliquid gas or petrol, that willcause fire or explosion. Do notuse the supplied sensors in cor-rosive chemicals, like acids,since it will be eroded. Ratheruse sensor electrodes that aremade of inert metals.

SMD HUMIDITY ALARM:WATER AND RAIN DETECTOR

Electronic humidity alarm with modern SMD-chip construction parts and dynamical micro-loudspeaker. Whenever both sensors of thedevice get in touch with water, an audiblesound will be heard. Ideal as warning devicefor wet baby’s napkins, overflown washing-machines, for miniature boats, etc. Operating voltage: 9 Volt


WATER DETECTOR

The detector will make alarm in case of con-tact with water. This device will indicate mainwater pipe bursts, overflown washing-machines, full baths, etc. The sensor may beconnected through a longer cable. Operating Voltage: 6 to 9 VDC


WATER ALARM

This kit generates an alarm sound when itdetects water. Incorporated alarm buzzer.Water sensor can be placed at a distance bycutting the board and using wires to connectthe sensor.Specifications:Power Supply: 9V battery (not included)Dimensions: 45 x 70mm


FLUID LEVEL SENSOR /RAIN ALARM 12 V

A very useful circuit that constantly monitorsthe level of any liquid in a container, andconnected with a suitable pump can maintainit within certain limits which you can presetby placing the maximum and minimum levelsensors there. It can also be used as a raindetector. Sensors are not included.Please note: Never use the sensors in aninflammable enviroment that will cause fireor explosion.Supply Voltage: 12 VdcSupply Current: 60mARelay: (SPST) with COM., N.O. and N.C.Relay Contact Rating: max. 2A / 250VDimensions: 31 x 57mm, 25mm height


LIQUID LEVEL CONTROLLER

This kit is used to monitor and control liquidlevel. Perhaps forgotten to turn off the tap,leaking washing machines, water level drop-ping in your aquarium, rain tank or watertank suddenly dry or over flowing. This kitcan keep the liquid level within 2 limits, lowand high mark, by controlling a pump orvalve. An output relay switch with common,normally-open and -closed connections issupplied. The relay can be used to operate abell or other alarm device.A PCB is supplied with 2 level sensors:

Sensor1 for detecting the high level markSensor2 for detecting the low level mark

It has 4 indicator LEDs:High-level indicator LED1Middle-level indicator LED2Low-level indicator LED3Relay on indicator LED4

An alternating sensing voltage with a 1kHzfrequency is used to avoid electrolysis ordeposits on the sensors.Please note: Never use the sensors in aninflammable enviroment that will cause fireor explosion. Do not use the supplied sen-sors in corrosive chemicals, like acids, since

it will be destroyed.Specifications:Supply Voltage: 16 - 18Vdc or 12 - 14VacSupply Current: 0.1Adc or 0.3AacOutput Relay Contact Rating: 240V/3A max.Dimensions:

Controller PCB: 60 x 104mmSensor PCB: 25 x 104mm


WATER LEVEL SENSOR 9V

Whenever two bare wires make contact withwater, the light emitting diode will light up.The device is suitable to set an alarm incase of overflowing rain barrels and gutters.Optionaly one can connect (FB631), RelayCard, to this kit that can switch other devices(e.g. pumps) up to a maximum current con-sumption of 3A. Supply Voltage: 9Vdc


TEMPERATURESWITCHES

FROST INDICATOR

This temperature sensing kit is used as alow temperature warning device. It has anindicator LED that only lights up close tofreezing point (0 to 3°C), by flashing, butbelow this temperature (-3°C) it will remainon continuously. A reliable thermistor, withmounting stud, is supplied to sense the tem-perature. It can be mounted on the outsideof a vehicle to sense the road temperature.Calibration of trigger temperature is possible.Specifications:Supply Voltage: 10 - 15VdcSupply Current: 25mATemperature Sensor: stud-mount thermistor

NTC 6.8 kOhm / 25°CDimensions: 56 x 42mm, 20mm height


02.66

TEMPERATURE SWITCH-30 TO 120 °C 12V

The kit switches a relay on or off accordingto a preset temperature. It is ideal to use asa thermostat, ice alarm, fire detector, etc.The temperature range is approximately -30deg C to 120°C.Operating voltage: 12VDCRelay: max. 3APCB size: 45x22mm


THERMOSTAT

This kit is a general-purpose low-cost ther-mostat using a NTC temperature sensor. Ithas a relay as output and a LED-indicator.Specifications:Temperature Range: +5°C to +30°C approx.(41°F to 86°F)Relay Power Rating: 24VDC/AC 3APower Supply: 12VDCSupply Current: 100mADimensions: 54 x 62 x 28mm


DIGITAL TEMPERATURECONTROLLER WITH LED DISPLAY

This kit is a digital temperature controller thatmeasures temperature with the DS18B20temperature sensor from DallasSemiconductor. This sensor is factory cali-brated. The kit is controlled with a prepro-grammed PIC16F627A microcontroller. Thesource code is supplied. The measured tem-perature is displayed on a 2 digit, 7-seg-ment, red, LED display. This kit can alsocontrol temperature by switching an externalheating or cooling element using the on-board relay switch.Temperature Trigger Settings:The on-temperature is the lower limit abovewhich the relay switches on.The off-temperature is the upper limit below

which the relay switches off.These 2 temperature settings can be inde-pendently set by the user.Specifications:Supply Voltage: 12VdcSupply Current: 150mA max.Temperature Range: -40 to 85°C

2 trigger settings are within this rangeTemperature Hysteresis:This kit can be used to keep the measuredtemperature within a fixed range. The small-est temperature range is 1°C.Output Relay: SPDT with COM., N.O., N.C.

contact rating: 5A max.Dimensions: 65 x 80mm, 25mm height

KIT ORDER CODE: AB197 MODULE ORDER CODE: AB243

MANUFACTURED BY: ELECTRONICS123

TEMPERATURE SENSOR

This temperature sensor kit has been devel-oped especially to be used together with kits:

Temperature Controller (GC099) andMicroprocessor Controller / Timer (GC097)

This sensor is used with these kits to build atemperature regulation and control system.The advantage of a separate sensor lies inthe fact that the distance between the actualcontroller and the sensor is of no impor-tance.Specifications:Supply Voltage: 10 - 14VdcSupply Current: 20mASensor Temperature Range: -40°C to 150°CSensor Linearity:

from -10°C to 50°C is better than 0.5%full scale: better than 2%

Output Signal: (PWM) the pulse width ismodulated with temperature: 200µsec/°C

Generated Pulse Width:at -40°C: 2 msec. (adjust ± 500 µsec.)at +150°C: 40 msec. (adjust ± 2500 µsec.)

Output Current: 15mA current loopDistance: is tested up to 50m (distance

between sensor PCB and controller)PCB Dimensions: 45 x 47mmHints:For temperatures below 0°C and above70°C it is advisable not to install the elec-tronic circuitry (pcb with components) nearthe actual sensor with 2 leads. If you experi-ence difficulties with calibration, replaceRV3, 5K with a 20K type, or replace theSG3524 IC ( Texas ) with a CA3524 ( Harris) type.


TEMPERATURE SENSORWITH LED DISPLAY

This temperature sensor kit has the samefeatures as the Temperature Sensor kit(GC098). In addition, it has a LED display,that shows the following three items:1) The current temperature reading2) Minimum temperature setting3) Maximum temperature setting.It can be used together with kits:

Temperature Controller (GC099) andMicroprocessor Controller / Timer (GC097)

A splendid aluminium housing with frontsticker is supplied with this kit.Specifications:Supply Voltage: 12 - 15VdcSupply Current: 150mAmin. and max. thermometerSensor Temperature Range: -50°C to 150°CIt can be set to degrees FahrenheitLED Display: 3 ½ digit, 7-segmentResolution: 0.1°CDimensions: 144 x 50 x 22mm


TEMPERATURE CONTROLLER

This is a dual output temperature controllerkit that displays temperature and time.Unlike a normal thermostat, this kit has twooutput relay switches. The HI-relay is forswitching on a cooling device when themeasured temperature is too high, likeswitching on the air conditioning fan. TheLO-relay is for switching on a heating devicewhen the temperature is too low, like switch-ing on the central heating system. Both relayoutputs have a temperature trigger point andhysteresis that can be independently adjust-ed. One external temperature sensor kit isalso supplied with this kit.Specifications:

02.67

Supply Voltage: 9Vac (50Hz for clock timing)Supply Current: 300mAOne optocoupled input for connecting to the

supplied Temperature Sensor kit (GC098)(one Temperature Sensor kit is supplied)

Optional: (if sensor should have own display)One can replace the supplied TemperatureSensor kit, (GC098), with the TemperatureSensor with LED Display kit (GC100).

Two Relay Outputs: each SPDT with COM.NO. and NC. contact connections

Relay Contact Rating: max. 5A / 220VacDisplay: 4 digit, 7-segment, red LEDsTemperature Display Range: -40°C to 150°CResolution: ± 0.1°CRelay Trigger Point Temperature Range:

from -50°C to +154°CTime Display: 24-hour format clock

(requires 50Hz mains frequency for timing)Dimensions:

Front Panel: 60 x 117mmBuilding-in Depth: 80mm min.


THERMOSTAT WITH LCD DISPLAY

This is a temperature controller kit with 3 ½digit LCD display. It attempts to steer themeasured temperature towards anadjustable set temperature. When you pressthe pushbutton, switch1, the set temperatureis displayed else the measured temperatureis displayed. The display can be calibrated indegrees Celsius or in degrees Fahrenheit. Ithas an on-board output relay to do theswitching of the heating or cooling device.The amount of temperature hysteresis isadjustable. There is also a connection for aneconomy switch that lowers the set tempera-ture, for example the room temperature dur-ing your absence, to save energy. Specifications:Supply: 230Vac (transformer is supplied)Temperature Range: -50°C to +150°CAdjustable Hysteresis: 0.2 to 10°CDisplay Resolution: 0.1°COutput Relay: SPDT with COM., N.O., N.C.

contact rating: 240V / 3A max.Dimensions: 124 x 62 x 65mmOptional: (not included)Enclosure for this thermostat kit: AC982

KIT ORDER CODE: GC096 MANUFACTURED BY: VELLEMAN

HOUSING FOR THERMOSTAT WITHLCD DISPLAY GC096

This enclosure is specially made for the ther-mostat with LCD display kit (GC096).Please note that this is only the empty enclo-sure and there are no electronics sold with it.Dimensions:Length: 130mmWidth: 70mmHeight: 70mm


THERMOSTAT WITH REMOTECONTROL VIA TELEPHONE

This thermostat kit is used as any other tem-perature controller, but with the added fea-ture that one can select either the day ornight temperature. Selection between day ornight setting is done by means of a push-button on the device front panel or a tele-phone. The remote control facility is operat-ed via the telephone keypad, thus a DTMFtype phone is required (does not acceptpulse dialling). It can indicate if the day ornight temperature setting is being used bymeans of audio signals sent down the tele-phone line. It can be switched between theday or night temperature setting by using asecurity code, set by the user, which iskeyed into the telephone in a simple manner.It can be set to control the ambient tempera-ture in a room by switching a heating device(not included). The preferred end-tempera-ture can be set to either the day or nighttemperature setting. The specific tempera-ture settings can only be set manually withthe two turning knobs on the front panel ofthe thermostat. The enclosure is supplied.Specifications:Supply Voltage: 220VacOutput Relay: SPDT with COM., N.O., N.C.

contact rating: 240Vac / 5A (1200W) max.Local manual controlSeparate Temperature Settings:1 for day time temperatures:

adjustable between 14°C and 26°C and1 for night time temperatures:

adjustable between 6°C and 18°CTemperature Hysteresis (allowed tempera-ture swing): ± 0.1°CThree LED indicators for:

Day time temperature is selectedNight time temperature is selectedTelephone call was received and

thermostat has picked-up the lineRelay output switch is active (on)

Telephone pick-up after ± 3 or 8 ringsReport when the temperature is below 3°CAutomatic hang-up if no security code isreceived within 40 secondsPossible security codes: from 000 to 999Dimensions: 180 x 90mm, 40mm height


SOUND SWITCHES

TELEPHONE TWO-CALL/ DEVICENOISE SWITCH

This acoustic switch works with a micro-phone and a relay. Whenever there is anykind of noise, (e.g. ringing of a telephone,doorbell etc.), the microphone senses it andswitches on the output relay switch. It stayson until the noise stops. With the aid of thisdevice you may activate a sounder or light inanother room. Ideal for persons with hearingproblems. It can be used in rooms with highambient noise levels, as an acoustic alarmsystem etc. The microphone pick-up sensi-tivity is adjustable. Operating voltage: 9 VDC


MINI-VOX AND RELAY 12VDC

The idea behind a VOX kit is that instead ofthe user pressing a pushbutton switch, thesound of the users voice activates a relayswitch. This kit enables hands-free controlover devices like tape recorders.Power Supply: 12Vdc.


VOX FOR AUTOMATIC RECORDING6VDC

This is a very sensitive, sound or voice acti-vated switch which plugs into the remoteplug of a tape recorder. It is ideal for handsfree operation of a tape recorder. It has amicrophone, a delay circuit and adjustablesensitivity. It will turn on the tape recorderwhen the microphone detects sound that islouder than the preselected trigger soundlevel. The recorder will remain on while thesound continues. The circuit will turn off thetape recorder approximately 6 seconds afterthe sound level has remained below the trig-ger level. A battery holder for 4 AA size 1.5Vcells is supplied.Power supply: 6VDC


02.68

CLAP SWITCH 12V

This is a sound sensitive switch that togglesa relay on and off whenever there is a noiselike the clapping of hands. The relay switchwill change from off to on or from on to offwith every clap. It does not have a built-intimer. The sound sensitivity is adjustable.Usage: For switching on and off lamps orother devices like alarm system by simplyclapping your hands.Specifications:Supply Voltage: 12VdcSupply Current: 80mA max.Relay Contact Rating: 3A max.Dimensions: 45 x 57mm, 30mm height


CLAP ON/OFF SWITCH

Features:You can operate your lighting with a simplehandclap. It is ideal for disabled or elderlypeople. It has good immunity against sur-rounding noises. It is microprocessor con-trolled. Output relay operation can be select-ed to be either ‘pulse’ or ‘toggle and latch’.Select one of two activation modes:‘1-clap’ or ‘2-clap’-mode selection‘2-clap’-mode features built-in safety turn-offtimer (5h approx.)The output relay has a LED-indicator.Specifications:Relay Power Rating: 24VDC/AC 3APower Supply: 12VDC / 150mADC adapter socket is includedDimensions: 79 x 73 x 22mm

KIT ORDER CODE: GB606MANUFACTURED BY: VELLEMAN

LIGHT SENSITIVESWITCHES

LIGHT BARRIER

Whenever there is incidence of light onto thephototransistor, the light barrier will switch on

a LED.As soon as the Light beam will be interrupt-ed, the LED will switch off.Operating voltage : 6-12VDC


LIGHT ALARM 9 VDC

This kit detects the slightest light. Protectyour cash drawer, medicine cabinet or cook-ie jar with this light alarm. The kit uses theMAL12 darlington phototransistors and a4011 CMOS IC containing 4 logic NANDgates. This kit is a good introduction to sev-eral electronic building blocks, especiallyNAND gate operation and how to get a piezoto sound loudly by using an inductor.Power Supply: 9V batteryPCB Size: 23 x 50mm


LIGHT CONTROLLED RELAYSWITCH 12VDC

This device has a sensor that is sensitive toordinary light and controls a relay. It can beused in alarm systems and for twilightswitches. The relay can be set to switch onwhen the light intensity is above or below aspecific level. This reference light level isadjustable. It requires a 12VDC power sup-ply. The relay can switch current loads up to6 Amps 12VDC.


LIGHT / DARK ACTIVATED RELAYSWITCH 12-15 VDC

A simple and inexpensive circuit, suitable formany applications like the automatic switch-ing of the lights in a shop window or a roomaccording to the ambient light level. The cir-cuit uses a light dependent resistor (LDR). Alight/dark option has been incorporated. Theterm ’light/dark’ is used because the circuithas a PCB-mounted switch on board. In oneswitch position a light-to-dark transition willactivate the relay. In the other position adark-to-light transition is required. So youcan use the falling light on the detector toswitch on a normally off circuit or switch off anormally on circuit.Power supply: 12 to 15VDCRelay: 240VAC/5APCB: 60x32mm


LIGHT SENSITIVE SWITCH

This kit automatically Switches on at duskand turns off at dawn.Features:wide-range adjustable sensitivitydelay circuit avoids on/off-cyclingSpecifications:Power Supply: 12VdcRelay Output (SPDT): max.5A/24VdcAdapter-Connector is includedDimensions: 65 x 50mm


THREE LDR LIGHT / DARKACTIVATED RELAY SWITCHES

Three different light sensitive kits each with aLDR (Light Dependent Resistor) and outputrelay switch. Each circuit has its own fea-tures and disadvantages that are examined.The kits feature:Kit (A) can be set to switch the relay outputeither on or off when the light level increasesabove a preset value. Relay chatter occursduring on/off switching.Kit (B) is an improved version of (A) withmuch less relay chatter. It makes use of aLM741 op-amp used in a Schmidt Triggerconfiguration.Kit (C) is similar to (B). Two transistors areused for the Schmidt Trigger.Specifications:Supply Voltage: 12VdcOutput Relay: SPDT with N.O., N.C. andCOM. contacts with 230V/10A max. ratingPCB Dimensions (3 PCBs): 37x60mm max.


LIGHT BARRIER-HEAT SWITCH 12V

With this ’combination construction set’ youmay optionally construct a light barrier, aheat switch (-40ºC...+100ºC), ice alarm or atwilight switch.Operating voltage: 12 VThe relay has a max. load of 6 A


02.69

TWILIGHT SWITCH 230VAC

The switch is capable of switches loads upto 3A 230VAC (e.g. energy saving lamps)automatically at dusk via an installed relayand switches off again at dawn. The kit canalso work the other way round: Switching offat dusk and connection at dawnDimensions: 40x51mm, 30mm height.


TOUCH SWITCHES

SENSOR SWITCH 9V

Whenever the two screw heads will betouched with the fingers, this device will lightup a light emitting diode. If a relay card, kitFB631, is connected with the sensor switch,it is feasible to switch through the relay con-tact loads up to 3A.Operating voltage 9VDC


SENSOR TOUCH SWITCH

By soft touching of the sensors with the fin-gers, nose, etc. it is possible to connect andswitch off devices (by a relay). Ideal assecret switch (screw heads), as original bell,for use in hidden switches, etc.Operating voltage: 12 VDCDimensions: 45x55mm, 30mm height


RELAY TOUCH SWITCH

This touch switch kit is activated by justtouching a wire or touch plate. It is built

around the LM/NE555, from NationalSemiconductor, used as a monostable multivibrator circuit. It switches on a relay onceactivated that stays on for 1 or 5 seconds.The relay has a 10A contact rating.Operating voltage: 12 VDC


TOUCH / CONTACT SWITCH12VDC / 220VAC

This kit combines a touch switch and a touchplate all together in the same kit. In thetouch switch two leads must be shortedtogether by your finger touching them. In thetouch plate on one plate need to be touched.A battery can power the touch switch but amains power supply must be used for thetouch plate to work. A 12V relay rated atswitching 240V/3A is supplied.Supply voltage: 12VDC / 220VACPCB size touch switch: 50x47mmPCB size touch plate: 50x47mm


LIGHT DIMMERS

TOUCH LIGHT DIMMERWITH MEMORY 220VAC

This is a very modern dimmer that onlyneeds a light touch to operate. A light tap onits sensor will turn the light on or off. A longertouch will either increase or decrease thelight level. The circuit incorporates a memoryand will switch the light on at exactly thesame level it was before switching off. Verystable operation.Working voltage: 220 VACMaximum power: 400WMaximum current: 3.5 A


DC CONTROLLED DIMMER 220VAC

This kit is a small but handy circuit that isideal for replacing an existing dimmer orswitch, in order to be able to control a lamp,set of lamps or even a motor via anadjustable DC voltage. One obvious applica-tion is control via low voltage interfaceboards, thanks to its optically isolated input.It has a pre-set adjustment for full brightnessand “soft start” feature to lengthen lamp life.It is suitable for incandescent lamps, mainsvoltage halogen lighting and low voltagehalogen lighting in combination with a con-ventional transformer. Specifications:Supply Voltage: 110Vac or 230-240Vac,

50 or 60HzSuppression of radio and TV interference

according to EN55015Power Output: 750W / 230Vac max.Load Current: 3.5A max.max. phase shift with inductive load: 30°Stepless Control Range: 0 - 98%Control Voltage Range: 0 - 12Vdc max.Input Current: 2.25mA max. for 12V inputLEDs for status indicationDimensions: 90 x 75 x 40mm


PUSHBUTTON CONTROLLEDDIMMER 220VAC

This is a mains light dimmer kit. A singlepushbutton switch is used to control thebrightness of a light. A brief push of theswitch toggles the light either on or off, whilecontinual pushing initiates the dimmingaction. It has a soft-start function. It is suit-able for low voltage halogen lighting. Thedimmer saves the preferred light level involatile memory. The dimmer will lose itsmemory if the mains supply voltage is dis-connected from it. Note that it requires amains rated push-button switch (GB723).Specifications:Operating Voltages: 220 - 240VacPower Output: 750W / 3.5A max.Noise is suppressed according to EN55015Dimming speed: 3.5s between fully off / onDimensions: 62 x 49mm, 38mm height


02.70

TRANSFORMER CONTROLLERMODULE 230VAC

This device may be used to control thepower input to a tranformer. It is connectedat the 230Vac primary side of a transformer.The brightness (power output) of low-voltagehalogen lamps can be controlled indirectly bycontrolling the power input to the step-downtransformer that powers the lamp(s).Specifications:Operating Voltage: 230VacPower Output: max. 400W at the input side

(primary) of a transformerDuty Cycle Range: 5 - 95 %Required potentiometer: 500k Ohm linear:

(HB170)Dimensions: 71 x 49 x 26 mm


MULTIFUNCTIONAL DIMMER

This multifunctional dimmer kit is designedfor controlling 230Vac lighting. It makes useof microprocessor technology.It has an advanced protection system withLED fault indication. This protection systemautomatically switches off the dimmer unitwhen the load is too inductive or no load isdetected.The dimmer can be operated from variousremote places by the parallel connection ofmains rated push-button switches (GB723).The “soft start”-function prolongs the life ofyour light bulbs.It has 13 operating modes like on/off toggle,regular dimmer, staircase light control, slowon/off dimmer, interval timer, speed adjust-ment for fans, etc...It is suitable for both resistive and inductiveloads: incandecent lightbulbs, high-voltagehalogen lighting and low-voltage halogenlighting with wirewound transformer. Onboard fuse and mode selection push-button.Specifications:Noise suppressed according to EN55015Two delay timers that can be programmedthrough the learning mode:

each between 5 seconds and 2 hoursNo Memory Loss in case of power failureAutomatic Frequency Detection: 50 or 60HzPower Supply: 110 to 240VacLoad Current: 2.5A max. fusedPower Output: 600W / 300VA max. 240VacDimensions: 100 x 82 x 36mm

Module Dimenions: 106 x 101 x 44.5mmWeight: 207g



SUPPRESSED 3.5A DIMMER 230VAC

This is a compact dimmer kit that will easilyreplace an existing on / off light switch. Thiskit enables one to vary the brightness of asingle light or a group of lights that are con-nected in parallel. It may also be used toadjust the speed of a vacuum cleaner or any230Vac motor with carbon brushes. A mainsnoise suppressor is used to filter out RFinterference.Specifications:Supply Voltage: 230VacOutput Current: 3.5A max.Output Power: 750W max. at 240VacNoise suppression according to EN55015Protected against induction voltage peaksFuse Protection: 20 x 5mm 4A fuse in holderDimensions: 60 x 60 x 40mm


MAINS LIGHT DIMMER 220/240VAC

This is a standard triac light dimmer circuitthat can be used to adjust the brightness ofmains lights. It can also be used to controlthe speed of AC motors. It has built in RFanti-noise suppression in the circuit. It worksbetter than some commercial units on themarket especially at low light levels. It doesnot flicker at low light levels. Power supply:220VACMaximum Load: 600WMust be built into a box for regular operation.


MOTOR SPEEDCONTROLLERS(AC MOTORS)

LAMP DIMMER,MOTOR CONTROLLER

MODULE 600W / 230VAC

This device may be used to adjust and regu-late the power used by incandescent lamps,heaters, hand drills, etc.A potentiometer is used to adjust the powerconsumption of loads with operating volt-ages: 110 - 230Vac. An interface module(GB801) may be used for making adjust-ments, using control voltages or digital sig-nals, instead of a potentiometer.Specifications:Operating Voltage Range: 110 - 230Vac /

50 - 60 HzMax. admissible short time current: 6A and

(3A continuous duty)Power Output at 230Vac: max.1200W and

600W continuous dutyPower Output at 110Vac: max 600W and

300W continuous dutyDuty Cycle: 100% at 3A or

20% at 6A (max. 3 min.)Control: via a firmly connected rotary

potentiometer with knob (is included)Loads: for ohmic or inductive loadsDimensions: 61 x 35 x 23mm


DC OR PULSE CONTROLLEDINTERFACE MODULE 230VAC

This device is specifically made to interfacewith power controller modules (GB750) and(GB796). This device enables one to adjustthe above mentioned modules without usingpotentiometers, but directly replacing them.The module can receive either a DC voltageor TTL periodic pulse train input signal froma microcontroller or computer. The inputs areoptically isolated from the internal circuitry.

02.71

The input signal is linearly interpreted todrive the device output. The output is con-nected in the potentiometers place (refer toincluded connection diagrams).Specifications:Operating Voltage: 110 or 230Vac is led to

the device via the connectionsOutput Signal: a control voltage for the

potentiometer input of (GB750) / (GB796)Input Signals: (only 1 input used at a time)

DC Voltage Inputs: 1-5V / 1.4k Ohm,3-12V/4.1k Ohm, or 6-24V / 9.1k OhmPulse Train Input: pulses 0-5V / 1.1k Ohmwith Frequency Range: 1 - 10kHz andDuty Cycle Range: 10% - 90% (full on)Adjustment is done by changing thepulse width.



DRILL SPEED CONTROLLER220VAC

This is a circuit that may be used to adjustthe speed of rotation of drills and small elec-tric motors in general. It is ideal for use whenthe drill is used to drive a screw into place orto wind a coil.Power supply: 220VACMaximum Load: 600WPCB size: 65x48mm


SPEED CONTROLLER

This is an AC motor speed controller kit. It isdesigned to control only single phase ACmotors that must have carbon brushes, likeelectric saws, drilling machines, vacuumcleaners, etc… This kit maintains acceptablemotor torque, even at low rotational speeds(r.p.m.). It may also be used to control lowvoltage, 24Vac, motors. The output load cir-cuit, that includes the motor, is electricallyisolated from the mains power supply.Specifications:Supply Voltage: 110 - 240VacOutput Load Voltage: 24 - 240VacMaximum Output Current: 5.5AAdjustable Speed: 5 - 95% of full speedSuppression of radio and TV interferencePCB Dimensions: 130 x 75mm


POWER CONTROLLER MODULE230VAC / 2600W MAX.

This mains voltage power controller is idealfor driving ohmic and inductive loads, likemotors, heating sets, glow lamps etc.Note that this device is not suitable for driv-ing motors that require a starting capacitor orfluorescent lamps. An expansion module(GB801) may be used for making adjust-ments, using control voltages or digital sig-nals, instead of a potentiometer.Specifications:Operating voltage: 230VacPower Output Rating: max. 2600VARequired Potentiometer: 500k Ohm linear:

(HB170)In case a fine control is required also useadditional potentiometer: 100k Ohm linear:

(HB169)Dimensions: 70 x 55 x 20 mm


POWER CONTROL DIMMER2600W, 230VAC

This unit controls steplessly glow lamps,heating devices, (e.g. soldering irons,heaters etc.) as well as motors (universalmotors like drilling machines, keyhole saws,etc.). Max. operating power: 2600 Watt. Max.temporary operating power: 3600 Watt.There is also necessary a cooling elementwith minimum dimensions: 10x10x3cm


MOTOR SPEEDCONTROLLERS(DC MOTORS)

DC TO PULSE WIDTH MODULATOR8 -35VDC

This control circuit is ideal for the accuratecontrol of DC motors, lighting levels, smallheaters as well as other applications. Thecircuit converts a DC voltage into a series ofpulses, such that the pulse duration is direct-ly proportional to the value of the DC volt-age. The great advantage of such a circuit isthat almost no power is lost in the control cir-cuit. Protected against overload and shortcircuit.Supply voltage: 8 - 35V DCMaximum output current: 6.5AInput voltage: 2.5 and 35V DCPCB size: 85x48x45mm


DC MOTOR SPEED CONTROLLER5 - 15 VDC

This kit will control the speed of any com-mon DC motor rated up to 100V (5A). Thecircuit operates on 5V to 15Vdc. It uses aNE556 to pulse-width modulate a high cur-rent switching power MOSFET, IRFZ44N orIRF530N. In this way motor torque is main-tained regardless of the adjusted speed.Supply Voltage: 5-15 VDCDimensions: 55 x 96mm, 30mm heightEnclosure Dimensions: 60 x 100 x 30mm


BIDIRECIONAL DC MOTORSPEED CONTROLLER

6 - 32 VDC

This kit enables one to control the rotationspeed and direction of a DC motor with asingle potentiometer. The motor is off in thecenter position of the potentiometer. Themotor will turn in opposite directions, whenthe potentiometer is turned, to the left and

02.72

then to the right of center position. The fur-ther the potentiometer is turned, away fromthe center position, the faster the motor willturn. The motor’s speed is controlled byusing the PWM, (pulse width modulation),current switching technique. Two IRFZ44Nand two IRF4905 power MOSFETs are usedfor current switching. The circuit and motorhave to use the same supply voltage.Specifications:Motor and Circuit Supply Voltage: 6 - 32VdcMaximum DC Motor Current: 5ADimensions: 42 x 93mm, 30mm height


DC MOTOR SPEED REGULATOR /LIGHT DIMMER 12 - 24VDC / 10A

Electronic DC output regulator for incandes-cent lamps and motors up to max. 120W(10A). The power can be extended up tomax. 360W (30A). When using operatingvoltages of 14 to 24V, it is necessary to buy3 resistors (100 Ohm, 7W) in addition.


SPEED CONTROL FORMINI-DRILLING MACHINES

This device is suitable for operation of minia-ture drilling machines with DC-motors at atransformer. The rectifier is already fitted,you need only a transformer with AC-voltage,voltage according to the drilling machine. Formotors up to 3A current input.Operating Voltage: 12 to 24V


RADIO, TV, VIDEOTRANSMITTERS

Note: This section contains radiotransmitters: FM- , VHF-oscilla-tors, telephone bugs and FM-transmitters. It is very importantto know that transmitted radiosignals may interfere with otherradio signals and radio equip-ment. It is the full responsibilityof the client (user of radio equip-

ment) to obtain the requiredlicense and obey the regionalregulations on radio communica-tions and radio equipment.

FM OSCILLATOR

Mini FM modulator (100 - 108MHz).Integrated pre-amplifier, to which any type ofmicrophone may be connected. Familybroadcasts, babyphone, security. May bereceived by any portable FM radio or tuner.Specifications:power supply : 9 - 12VDCinput sensitivity preamplifier : 5mVPCB dimensions : 45 x 70mmAttention: Use of this device has to be inaccordance with your country regulations.


VHF-OSCILLATOR 2W

Suitable for microphone or tape connector. Inthe EC the device may only be used bylicensed radio amateurs. The use as buggingdevice (mini-spy) or private radio transmitteris prohibited and a punishable offence inmany countries (e.g. Europe). Exceptionsexist in the USA or international waters. Therequired coil is not enclosed. It is to bewound by using own material (bare wire).Adjustable: approx. 80 to 120 MHzOperating voltage: 9 to 26V max. 2W input.Attention: Use of this device has to be inaccordance with your country regulations.


TELEPHONE "BUG" TRANSMITTER

It is suitable for listening to telephone con-versations within a small distance around thetransmitter. It is connected in series with thetelephone and as soon as the receiver ispicked up it starts transmitting. It is poweredfrom the telephone line.Attention: Use of this device has to be inaccordance with your country regulations.


FM TEST TRANSMITTER

Mini FM radio transmitter with a built-inmicrophone. The transmitter frequency canbe adjustedSpecifications:Frequency Range: 88 - 108 MHzPower Supply: 9V batteryDimensions: 30 x 17 x 12mmAttention: Use of this device has to be inaccordance with your country regulations.


TELEPHONE FM TRANSMITTER

This kit is attached to your telephone linewith the supplied alligator clips. When thereis a signal on the line, (when you pick up thehandset), the circuit will transmit the conver-sation a short distance in the 86 - 95 MHzFM band. The transmission frequency maybe adjusted with the trimcap. No antenna isrequired. The phone line itself acts as anantenna. There is no battery required.Attention: Use of this device has to be inaccordance with your country regulations.


9V FM TRANSMITTER BUG

This FM transmitter `bug` kit has improvedfrequency stability and range. The oscillatorcoil (inductor) is etched onto the PCB andthe tracks are thicker. Frequency is tunedwithin 89 - 109 MHz FM band using a trim-capacitor. Range of 100m in the open. Youcan experiment with the antenna length foroptimum distance. The circuit is explained.Attention: Use of this device has to be inaccordance with your country regulations.


MINIATURE BUG

This FM transmitter is a minuature version ofKit AA218 using normal passive compo-nents. Components have been squashedtogether as much as possible while stillallowing good access to the tuning capacitor.Attention: Use of this device has to be inaccordance with your country regulations.


02.73

FM TRANSMITTER TWO STAGE9VDC

Our most powerful FM transmitter to date.Easy to build and tune in the upper part ofthe FM band. Reaches between 100m to 1Km in the open. Uses RF transistor for itsfinal stage. An on/off switch is mounted onthe PCB. Full circuit schematic provided.Working frequency range: 63 - 130 MHz.Power supply: 9V DC.PCB size: 70x17mm.Attention: Use of this device has to be inaccordance with your country regulations.


FM TRANSMITTER 1 WATT

This is a simple but very powerful FM trans-mitter kit that will give you a very pleasantsurprise with its capabilities. It is built aroundtwo transistors. The first transistor stage isan AF (audio frequency) preamplifier and thesecond transistor stage is the RF (radio fre-quency) output oscillator. The kit includes apiezoelectric microphone. An open dipoleaerial can be used. This transmitter candeliver up to 2 Watts RF power if it is usedwith a power supply voltage that is in therange of 24 - 30 Vdc.Supply Voltage: 8 - 30 VdcPCB Dimensions: 42 x 45mmAttention: Use of this device has to be inaccordance with your country regulations.

KIT ORDER CODE: FB715MANUFACTURED BY: SMART KIT

PLL SYNTHESIZER FM 88-108 MHZ

Upgrade your FM transmitter, with a FM PLL(Phase Locked Loop) synthesizer, thatensures accurate tuning without the slightestdeclination.This is accomplished by using acombination of dip switches to select a cer-tain frequency. The stability of the circuit isexcellent, due to Motorola's MC145151 anda crystal. Bandwidth 88 to 108 MHz with50KHz steps. If you use this kit along with(AB204), you have a complete PLL transmit-ter.Specifications:Supply Voltage: 24 - 30 VdcPCB Dimensions: 65 x 12mmAttention: Use of this device has to be inaccordance with your country regulations.


VCO FM 88 - 108 MHZ3W TRANSMITTER

The ideal way to extend the range and thecapabilities of your transmitter withoutspending a lot of money. This kit makes alinear VCO, (Voltage Controlled Oscillator),VHF amplifier for the frequency band 88 to108 MHz and is used for frequency modula-tion, (FM), transmitters. This circuit isdesigned with high frequency transistors likethe BFS22A and has output RF power of 3Watt in the antenna. If you use this kit alongwith (AB203), you have a complete FM PLLtransmitter. Easy tuning. Very Important: A licence has to be obtainedto transmit with this kit. Be 100% sure thatyour transmission does not interfere withother radio station frequency bands.Specifications:Supply Voltage: 24 - 30 VdcPCB Dimensions: 65 x 160mmAttention: Use of this device has to be inaccordance with your country regulations.


FM STEREO ENCODER

This stereo encoder kit can improve thestandard of your FM broadcasting. You caneasily connect it to any existing FM transmit-ter or modulator, (100-108MHz), withoutspending a lot of money or making compli-cated conversions. Try it and start broadcast-ing in professional STEREO today!Specifications:Supply Voltage: 24VAC / 110mAPCB Dimensions (2 PCBs):

88 x 185mm and 36 x 165mmAttention: Use of this device has to be inaccordance with your country regulations.


LINEAR CB 30 WATT

A linear amplifier that will make possible longdistance communications, with your existingCB equipment in the 27 MHz Citizen Band. Itis connected at the transmitter output beforethe antenna and is very simple to built and

adjust. The heatsink is included in the kit.The circuit also has a relay that will switchthe aerial from the transmitter to the receiverautomatically.Supply voltage: 13.5 VDCSupply current: 2.5A max.Attention: Use of this device has to be inaccordance with your country regulations.

KIT ORDER CODE: FB717MANUFACTURED BY: SMART KIT

AUDIO/VIDEO TV MODULATOR12 - 15VDC

If it is desired to connect a video signal origi-nating from a camera or other video sourceto a normal TV set, you will need this modu-lator. This kit has two RCA inputs. The oneinput is for an audio signal and the other isfor a video signal. The two input signals areconverted into one UHF TV signal, at thePAL socket, that can be connected to a TVantenna input. In certain countries it is per-mitted to use this modulator as a mini trans-mitter by connecting a small antenna to itsoutput. With this facility it is possible toreceive the signal from the video recorder orcamera elsewhere within your home (max.range of 30m). Please note that this kit’smain purpose is to convert an audio andvideo signal to an UHF signal, it is NOTintended to be used for wireless transmis-sion. A metal enclosure is supplied with thiskit.Specifications:Supply Voltage: 12 - 15V DCSupply Current: 100mATwo RCA Socket Inputs: audio and videoAntenna / TV PAL Socket Output:

UHF channel 21 (450-500MHz adjustable)Dimensions: 70x104x30mmAttention: Use of this device has to be inaccordance with your country regulations.


RADIO, TV, VIDEORECEIVERS

FIELD-INTENSITY INDICATOR

With this indicator it is made possible to testif the transmitter of your remote controldevice, CB-radiotelephone device, radiotele-phone, garage-door boy, etc. does reallytransmit. It is possible to test within therange of 10MHz up to 100MHz. Indication isrealised through LED. The measuring devicehas simply to be connected with the antennaof your transmitter, there is no need of an

02.74

interference in your transmitter!Operating voltage: 9VDC


AM/FM ANTENNA AMPLIFIER

This amplifier provides 22dB gain whereveryou need it. DC power supply directly or viathe coax cable. Metal housing included.Specifications:gain : 22dBpower supply : 12V to 15V / 3mAinput- and output impedance : 50 - 75ohmfrequency range : 10MHz to 150MHzdimensions : 86 x 36 x 24mm


ANTENNA AMPLIFIER 30 - 850 MHZ9-12V

This wide band antenna amplifier covers thefrequency range of 30 to 850MHz. It is idealfor weak VHF and UHF television signalsand also for the amateur radio bands. Noneed for balancing.Power supply: 9 - 12VDCOutput impedance: 60 OhmMax. amplification: 20dBPCB Size 55x55mm

KIT ORDER CODE: MB095MANUFACTURED BY: KEMO

ANTENNA AMPLIFIER50 TO 1000MHZ

Single-stage antenna amplifier, with continu-ously adjustable amplification up to maxi-mum of 15 dB. For any television range fromchannel 2 up to channel 65, especially suit-able for VHF radio and cable television.Input and output impedance: 50 to 75 Ohm.There are prepared clamps for coaxial cableon the board. As required it is possible toconnect two antenna amplifiers one afteranother. The total amplification will corre-spondingly increase.Operating voltage: 6 to 18VDC


CONVERTER 100 TO 200 MHZ

The converter makes it feasible to receive,for example, taxi radio, amateur radio,marine radio broadcasting, television sound,etc. through an ordinary VHF-radio. The con-verter has simply to be placed within theantenna lead! It is necessary to observe thePostal Regulations! Operation is solelyallowed to amateurs holding the respectivelicence!


AM RADIO WITH AMPLIFIER STAGE(SPEAKER INCLUDED) 9 VDC

A complete AM radio on a single PCB. Theradio frequency is front end tuned. A singlechip is used for the RF amplifier and detec-tor and two stages of amplification of theaudio signal into a speaker. The tuning coil ispre-wound. All components included.Power supply: 9VDC


IC-RADIO HF-MF-LF

An easy to mount radio with loudspeaker. Itis possible to receive high, medium or longfrequency. Excellent sound! Operating mode:single-circuit. For 9V. Output: max. 1 Watt.


FM RADIO

Features:Double fun: building and listening!easy to assemble: no coils to windone single adjustmentpre-assembled and tested FM front endreceives the complete FM band: 88-108MHzwith ON/OFF switch, volume control andLED indicatorSpecifications:Power Supply: 12VDC / 100mA (adapterjack provided)Dimensions: 125 x 85mm


FM-VHF RADIO RECEIVER(SPEAKER REQUIRED) 9 VDC

This small high quality FM receiver is builtaround the TDA7000 IC. The kit has excel-lent reception properties and selectivity. Power supply: 9VDCRange: 88 - 108MHzLF-output power: approx. 1WattSuitable speaker is Code: (GB820).PCB size: 60x70mm

KIT ORDER CODE: MB090MANUFACTURED BY: KEMO

FM RADIO RECEIVER WITH 5 WATTAUDIO AMPLIFIER 9-12 VDC

A small FM receiver that will surprise youwith its sensitivity and quality. It uses theTDA7000 which is a complete FM receiver ina single IC package. It features varicap tun-ing for higher stability and also incorporatesa powerful audio amplifier with a 5 Watt out-put. The kit includes the speaker.Working voltage: 9-12 VDCSensitivity: 1.5 uVAudio output power: 5 WattsDistortion: 0.7%

02.75


VHF RECEIVER 9V

High-quality VHF-receiver with special-IC.There is hardly no tuning necessity (2 coilsto be winded). Extraordinary sensitive andselective!Output: approx. 40mV for a final amplifier orearphone.


STEREO DECODER 4.5 TO 12VOLT

The decoder has simply to be connected atthe A.F. output (e.g. loudspeaker connection)of a VHF-radio. It is then possible to connectat the output of the decoder a stereo amplifi-er. Disconnectible, automatic switch-overmono-stereo when receiving the stereo sig-nal. Stereo indication through LED.Operating voltage: 4.5 to 12V


VHF - FM - TV RECEIVER

A receiver that lets you listen to all the fre-quencies between 50 and 160 MHz. It canreceive signals in AM and FM. The tuning isdone by means of a VARICAP diode whichgives the receiver greater stability. Thereceiver has a 5 Watt output, audio, poweramplifier incorporated on the same board.Specifications:Supply voltage: 12 - 15VdcSupply Current: 0.5A max.Frequency Bandwidth: 50 - 160 MHzAF Output Power: 5 Watts


TV AND VIDEO

AUDIOSCOPE

The audioscope produces vertical black barson the TV-screen, which move according tothe rhythm of the music (similar to an oscilla-tor). Operating Voltage: 9 to 14 VDC


TV PATTERN GENERATOR 9 VDC

A pattern generator is a very useful instru-ment for the correct alignment of the timingcircuits of a television set. This circuit is abar generator that will produce horizontaland vertical stripes (bars) on the TV screen,that will help you align the vertical and hori-zontal scanning synchronization circuits ofthe receiver.Working voltage: 9 VDCCurrent drawn: 2 mAOperating Frequency: 170 - 250 MHz (VHF)Horizontal scan frequency: 16525 HzVertical scan frequency: 50 HzOutput impedance: 75 ohm


VIDEO SIGNAL AMPLIFIER 12V DC

Video cassette recorders are becoming everso popular and as it was to be expected themarket is flooding with accessories thatmake the use of the VCR easier andenhance its operation. This circuit is a broadband amplifier which will take the video sig-nals from your VCR and will amplify themsufficiently to drive up to 3 monitors, TV sets(provided that they can accept direct videosignals), or other VCR’s for recording fromone video to up to three others. It will also make possible to record from onevideo to two others and at the same timehave a monitor connected to check what youare recording. The amplifier is also very use-ful if the video recorder is far from the moni-tor. PCB 120mm x 35mm.Working voltage: 12V DCCurrent: 100 mA


VIDEO SIGNAL CLEANER 9VDC

Features:This kit is used to clean a video signal andremoves unwanted distortion. It stabilises thepicture quality and fluctuations in brightness.Also improves picture quality on LCD moni-tors and projectors.There are inputs and outputs for both PAL(composite video) and NTSC (S-video) for-mats. Please note that these video signalscan not be mixed. A LED indicates when thevideo signal is distorted. Warning: this kitmay only be used for making backup of per-sonal copies of which you are the rightfulowner. Check copyright information on theoriginal DVD, VHS, VCD,...Specifications:Supply Voltage: 9VdcRecommended Adapter: Supply Current: 100 - 300mAPCB Dimensions: 100 x 84mmModule Dimenions: 106 x 101 x 44.5mm

KIT ORDER CODE: AB213MODULE ORDER CODE: GC117


VIDEO AND RGBCONVERTER / PROCESSOR

This kit is used to process PAL colour videosignals. To process a PAL colour video sig-nal it first has to be converted back into theoriginal red, green and blue signals. This kitcan separately adjust these colour signalsalong with the colour intensity, brightnessand contrast. After processing, the signal canthen be converted back into the compositePAL video signal. There is a PAL compositevideo output and also separate RGB (red,green, blue) colour signal outputs. It is alsopossible to connect a SVHS input signal.The enclosure is supplied.Specifications:Supply Voltage: 15 - 18VdcSupply Current: 500mAColour System: PAL (CCIR)3 Controls for:

saturation (colour intensity)brightness andcontrast

3 Separate Controls for:Red, Green and Blue colour signals

Composite Video Input (RCA-connector)Input Amplitude: 1VppInput Impedance: 75 ohmComposite Video Output (RCA-connector)RGB-output: 9-pin SUB-D connectorOutput Amplitude: 1Vpp

02.76

Output Impedance: 75 ohmOptional: (not included)RF Modulator Module (RFMOD) (AB416)(module is used to generate UHF TV signal)PCB Dimensions: 170 x 140mmEnclosure Dimensions: 200 x 67 x 170mm


SECURITYALARM SIMULATORS

AND DETERRENTS

LED EMERGENCY KIT 6 TO 15V

If the operating voltage for the LED-Emergency light (transfo, power supply, bat-tery) breaks down, the LED still lumines-cences > 15 minutes! During this time anGold-Cap-Elca supplies the LED with cur-rent. Use: marking of emergency exits,switches, locks etc. Operating voltage: 6 to 15V (DC) or (AC)


CAR ALARM SIMULATOR

A flashing LED with ‘realistic-appearing’sequence simulates an active car alarm sys-tem.Features:It activates automatically when the engine isturned offeasy to install, just two wires to be connect-edadjustable sensitivitySpecifications:Supply Voltage: 12VdcSupply Current: 12mA maxA pre-wired LED-holder and two warninglabels are includedDimensions: 57 x 45mm


ALARM DISPLAY

In this alarm display there have been fitted 2different coloured light emitting diodes, whichflash alternatively in short sequences. Foruse in cars, weekend-houses, etc. in order tosimulate an armed alarm set.Operating voltage: 9 to 12VDC


ELECTRONIC WATCHDOG

A circuit that produces a natural soundingbarking dog with a sensitive “ear” to every-thing that comes near it. It is a faithful watch-dog, which never sleeps and never has to betaken out for a walk.Specifications:Power Supply: 2 x 8Vac or 9 - 12Vdc /500mAChoice of Two different “Dog Sounds”Reacts to surrounding Noise with AdjustableSensitivitySpeaker Output: 2W at 4OhmDimensions: 142 x 75mmHints: If bark frequency is to low (very slowbark) reduce the value of C3 to 1500pF. Ifmicrophone is to sensitive, lower the value ofR20 and increase the value of R2. If there isa metallic background noise, put a 33pFcapacitor between pin 7 of IC3 and ground.


HIGH VOLTAGE,LOW POWER

DETERRING DEVICES

PARALYSER 10000 VOLT

With the aid of this device it is feasible toproduce with a battery 4.5 to 6V high-voltagepulses of more than 10.000 Volt, which strikethrough clothing and provide an ideal self-defence weapon. The attacker will have a’shock’ due to the strong electric shock. InUSA this kind of paralyser (built-in riot sticks)are used by the police. Also effective againstwild animals. The deterrent effect is alreadyachieved through the jumping sparks and thespark discharge noises!


ELECTRONIC FENCE

This kit, when used together with an addi-tional 230V-to-12V transformer, produces

high-voltage pulses that may be as large as3000 Volt.This kit is used to make a weaker type ofelectric fence instrument that is only suitablefor smaller fences and small animals. It isnot suitable for larger pastures and biggeranimals that will require a stronger electricfence instrument. A heatsink and transformeris required for this kit to work and it is notincluded with this kit.Specifications:Supply Voltage: 6VdcSupply Current: 1.5AdcDimensions: 27 x 55mm, 25mm heightRequired (not included):Heatsink: 50x62x17.5mm (AC824)Nut, Bolt, Washer, InsulatorsTransformer: 230Vac to 12Vac, 1A (AC658)


ELECTRONIC KEY ANDKEY-PAD SWITCHES

ELECTRONIC KEY ACCESS

When holding the supplied key pendant infront of the sensor (distance 5 to 15 mm), arelay on the circuit board switches on.Application: non-contact door opener toswitch appliances etc. You may hide the sen-sor behind a non-metallic nameplate or adoor glass pane. In this case only ’insiders’know, at which point you have to hold thekey pendant in order to open the door.The key pendant does not require any bat-tery! One key pendant is supplied.Optional: spare key pendant (GB791)Operating voltage: 12VDC 0.1A

KIT ORDER CODE: FB656MODULE ORDER CODE: GB755


ELECTRONIC COMBINATION LOCK12VDC

An introduction to a basic but fully workingcombination lock. Separate touch pad with 9pads. Lock is reset if an incorrect digit ispressed. Relay is capable of switching 240V.Robust and versatile.Supply voltage: 12VDC


02.77

SENSOR NUMBER LOCK

By touching the correct numbers a relay willoperate. In case that false numbers aretouched, the lock will block automatically forsome time. The number can be preset freely.Usage: For opening doors and gatewayswithout keys, to switch machines and elec-tronic devices, which should not be operatedby unauthorized persons (through latchingrelay). For selfmade electric locks at safesand partition for valuables etc.Operating voltage: 12 VDC


DIGITAL NUMBER LOCKWITH KEYBOARD 6VDC

After typing in any four-figure number, therelay will pull up. The code number can beprogrammed freely and is easily changed.Usage: As doorlock without using a key, toswitch on devices (radio, TV sets, machines,etc.) which should not be operated bystrangers. Even suitable for safe doors!Relay contact: 1xIN max. 5A loadOperating voltage: 6 VDC


DIGITAL CODE LOCK

This is a 4-digit, digital, code lock kit. It maybe used to switch an alarm on and off or toopen a electro-mechanical door lock. A LEDon the operating panel indicates the state ofthe lock. The four code digits are easilydefined using wire jumpers. It has a relayoutput switch. The aluminium operating

panel, with nine membrane keys, can beused inside and outside the house.Specifications:Supply Voltage:

8 - 12Vac or9 - 15Vdc

Supply Current:with relay off: 300nAwith relay on: 40mA

4-Digit security code (one of 3000 codes)Time Limit for entering the code: 5 secondsOutput Relay: SPDT max. 5A / 220VRelay Pulse Setting: connect jumper 1 if the

relay should only be on for a short timeIndicator LED: lit if the lock is open (relay on)Front Panel Dimensions: 80 x 80mm


USER-DEFINABLE8-CHANNEL TOUCH PANEL

Ever wanted your own keyboard with yourpersonal layout and symbols? Here is thesolution: a soft-touch see-through panel with8 keys. Now simply print YOUR keyboardlayout on a transparent foil and make yourown keyboard! Each of the 8 keys has aLED indicator and open-collector output.Each key is backlit and can be set to eithermomentary or toggle operation. Use jumpersto select 1 of 4 different keyboard functions:1) 8 independent keys (toggle or momentary)2) 8 rotary keys (pushing one key will clearall previously pressed keys and only set thekey that is currently being pressed)3) combination of (1) and (2): 4 independentkeys and 4 rotary keys4) 1 key can be set to serve as a pre-setmemory for the other 7 keys or it can be setas a “clear all” keyCompleting the features of this unique key-board is a “click” sound when the keys areoperated. The enclosure is supplied. The 8open-collector outputs can easily be con-nected to your own application or to a relaycard like:the 8-Channel Relay Card (AB308) or theUniversal Relay Card, 16 Relays (GC055)Specifications:Supply Voltage: 9Vac or 12VdcSupply Current: max. 250mA8 Keys: set for toggle / momentary operation4 different functions (jumper selectable)8 open-collector output switches:

max. 100mA / 50V per outputBoard-to-wire Connectors: 20cm wirekeyboard operating force: 40gDimensions (frame included):Height: 90mm, Width: 165mm, Depth: 35mm


ALARMCONTROL PANELS

MINI ALARM SYSTEM

It is feasible to connect as much alarm con-tacts as desired. The contacts (not enclosedin the kit) have to be fixed at doors, win-dows, drawers, etc. which are to be protect-ed. Whenever the alarm is activated, therewill sound for approximatley 2 seconds acheeping, shortly swelling up and down tone.The sound is relatively silent, but will attractattention and could be increased through anadditional amplifier. A mini-loudspeaker Ø30mm is enclosed. Ideal as alarm unit fordrawers, cupboards and for children’srooms. Operating voltage: 9 to 12VDC


UNIVERSAL ALARMFOR CAR, BOAT, HOUSE

Professional alarm unit for 12 Volt.Connecting features: max. 20 rest contacts.Contact control and alarm indication viaLED’s.Adjustable rise-delay time and alarm dura-tion: approx. 2 to 15 seconds and 8 to 30seconds, in accordance with the police law.


MOTORBIKE ALARM 6 VDC

A project that will protect your motorbike. Ituses a simple vibration sensitive contact thatwill detect the slightest movement of the bike(sensitivity is adjustable) and will trigger thealarm. When the alarm is triggered the out-put relay closes and its up to you to connectit to a siren or the motorbike’s horn. The cir-cuit has a preset alarm time that resets auto-matically.Power supply: 6VDC


02.78

CAR ALARM SYSTEM 6 - 12 VDC

A circuit that will effectively protect your carfrom theft. It can be triggered from the vibra-tions that will inevitably be caused by any-one attempting to break into the car. It willalso detect a door opening as long as it isconnected with the courtesy light by sensingthe voltage drop across the car battery whenthe light is turned on. It has entry and exitdelays and the alarm duration is adjustable.It resets automatically after an alarm.Needs a Piezo siren code PB042 if not con-nected to your car’s horn.Power supply: 6 to 12 VDC


CAR ALARM

This car alarm kit can detect sudden voltagedrops of the battery when the interior, trunk,or hood lights are switched on. To ensurecorrect operation, a number of control indica-tions have been included, such as: flashingLED to indicate that the adjustable exit delayhas expired, after you have left the car, andthat the alarm is armed. Pre-alarm buzzer toindicate that the alarm is activated, so thatyou will not forget to switch it off when youget into the car. The alarm is easy to switchon and off, either automatically or by meansof the ignition switch or a latching remotecontrol unit. The alarm has a relay outputswitch that can be used to switch an externalsiren either continuously or intermittently.Specifications:Power Supply: 12V batteryStandby Current: 25mAOutput Relay Switch: SPDT with COM, N.O.

contacts with 10A ratingBattery Voltage Drop DetectionEntry Delay Time: 2 to 30 seconds with

buzzer indicationExit Delay Time: 2 to 180 seconds with

LED indicationSounding Duration: (siren is not included)

60 seconds with automatic resetDimensions: 62 x 100mm, 26mm heightHint: To make the voltage drop detectionmore sensitive replace R1 with a lowerresistance value between 100 and 470 Ohm


CAR ALARM SYSTEMRF REMOTE CONTROLLED

This kit makes an outstanding car alarm sys-tem. Please note that this kit has to be sol-dered and assembled by an experiencedconstructor. This alarm system is controlledby a RF (radio frequency) remote controlunit. It can be connected to a variety of sen-sors. The RF remote control unit allows thisalarm to control a central door locking sys-tem (not included).Features:Microprocessor technology is used in designMulti-functional remote control operationAudio and visual on/off indicatorsMultifunction dashboard mounted LEDAutomatic reset after alarmAdjustable voltage drop detection (reaction

to interior lighting)Voltage drop detection active immediately,

or after 5 minutesDirect alarm trigger inputWarning alarm trigger input (2 triggers within

15 seconds = alarm) from optionalultrasonic detector (FB089)

Warning input can be switched off with theremote controlAdjustable shock detector is supplied (canbe switched off with the remote control)Detector input for ventilator fan in order toavoid false alarms from voltage drop sensor2 Switches pin contact type for bonnet and

boot is suppliedInternal siren for on/off signal and alarmOutput for external siren and pager (5A)Alarm Sounding Duration: 30 secondsStarter interrupter for ignition or diesel fuel

pump (15A)special starter motor interrupter

(30A) relay is suppliedOutput to hazard lights (2 x 6A max.)Output for central locking (100mA) can be

used with door lock interface (FB095)Selectable code for the supplied RF remote

transmitter and receiver (8.748 codes)Automatically resets and arming in the event

of accidental switch off (60 seconds)Input for optional ignition cut-off via security

code keypad (FB087)Diagnosis facility to identify a triggered

sensor at a later timeSpecifications:Supply Voltage: 12VdcStandby Current: 50mATemperature Range: -40 to +85°CBattery for remote control unit: 12V type

(DB247) (not included)Hint: Use the following capacitor values on

the RF remote control receiver:C6 is 1nF (DB191) andC7 is 100nF (DB202)


LIGHT BARRIERS

PIR MOTION DETECTOR

This kit, a state of the art passive infra red(PIR) motion detector, uses a purpose madeIC, PCB-mounted Fresnel lens and a dualelement PIR detector. The sensitivity, light-level response and output on-time isadjustable. A transistor open collector typeoutput with a LED indicator.Supply Voltage: 9 to 12VdcRange: 3mDimensions: 50 x 77 x 19mm


COMPONENTS FORPIR MOTION DETECTOR

This kit contains the 3 essential componentsrequired to make the PIR movement detec-tor (AB099):1 dual element PIR sensor1 Fresnel lens1 purpose made PIR motion detector ICApplication Notes are included.


INFRARED SPOTLIGHT

With the infrared spotlight CCD- and videocameras may recognize objects also in com-plete darkness. The infrared light is invisibleto humans, CCD-cameras can see well withan infrared spotlight. Perfect for inconspicu-ous observation of entrances, drives etc.Operating voltage: 12 to 14VDC 300mARange: 5m


MINI-INFRARED LIGHT BARRIER10CM

Infrared-light barrier with transmitter andreceiver and a range of approximately 10cm. Application: for the model railway, entryholes for aviaries, beehives etc. With invisi-ble infrared light ray. The light-emitting diodeextinguishes if the light barrier is interrupted.As accessories the kit FB631 Relay card isavailable in case other loads shall beswitched via a relay. Operating voltage: 6 to 12VDC

02.79


INFRARED LIGHT BARRIER 5M

Infrared light barrier with transmitter andreceiver and a maximum range of approxi-mately 5 metres. If the invisible infrared rayof light is interrupted (if for example a personwalks through the ray of light), this will beindicated by a light-emitting diode. If otherappliances shall be switched with the lightbarrier (e.g. a siren), a relay can be connect-ed in addition: (6V, >120 Ohm, not containedin the kit). Operating voltage: 9 to 12VDC


IR LIGHT BARRIER 1 - 4M

Applications of this kit are: announce visi-tors, warn against burglars, set boundaries,for science projects,...Specifications:Audible (85dB) and Visual LED indicatoralertRange: 1 to 4mon/off switch is providedPower Supply:

Transmitter: 9Vdc / 50mA maxReceiver: 9Vdc / 20mA max

Both units contain a 9V battery holder andpower adapter jackDimensions:

Transmitter: 55 x 40mmReceiver: 100 x 50mm

Note: This kit is not recommended for out-door use.


INFRA RED LIGHT BARRIER 20M

This kit uses an IR (infra-red) light beam tomonitor door- and passage-ways for security.It is suitable for detecting customers enteringa shop, cars coming up a driveway, etc. Thekit consits of a transmitter, that sends a38kHz pulsed IR beam, and a receiver thatsenses the IR beam. These must be alignedso that the receiver can continuously detectthe IR beam. The receiver has a (SPDT) on-

board relay switch that can be connected toa buzzer or alarm system.Specifications:Supply Voltage: 9 - 12VdcSupply Current:

Transmitter: 40mAReceiver: 50mA

Range: 20mRelay Switch: SPDT with COM, NO and NCRelay Contact Rating: max. 3A / 250VacDimensions:

Transmitter: 33 x 46mm, 15mm heightReceiver: 49 x 52mm, 20mm height


INFRARED LIGHT BARRIER-RANGEOVER 18M

Light barrier with invisible infrared lightbeam. Transmitter and receiver included!Ideal for alarm systems, automatical animalpicturing, remote control for garage doors,etc. With incorporated infrared filter for dayoperation!Operating voltage: transmitter 9V, receiver12V, relay 1 x ON max. 3A


INFRARED LIGHT BARRIER 50M

With the enclosed optics and highly sensitivephotodetector this light barrier has a maxi-mum range of up to 50m. The infrared lightray is invisible to the human eye. If the lightray between the transmitter and receiver isinterrupted (if a person walks through it) therelay in the receiver switches. Operating voltage: transmitter: 9 to 12V70mA, receiver 12VDC 100mARelay contact: 1 x change over 3A


MONOSTABLE TIMERS

MINI-TIMER

Whenever the enclosed push button ispushed, the light emitting diode will light up

for approximately 60 to 100 seconds. Usage.As timer for games (e.g. for chess) or foreasy photographic and developing works. Itis possible to make time adjustable, if apotentiometer 1M linear is connected (notenclosed in the kit). We offer as accessoriesour kit FB631 Relay Card, through which it ismade feasible to switch greater loads up to 6A with the Mini-Timer. Operating voltage: 9VDC


PRECISION-SHORT-TIMER0 TO 10 MINUTES

After pushing the button the relay will switchon for approximately 2 seconds up to 5 min-utes (adjustable) and will then switch offagain. Without adjusting possibility it is pos-sible to set periods over 5 minutes (approxi-mately 10 to 20 minutes). Operating voltage: 12 VoltRelay contact: 1 x change over 5 A.


TIME SWITCH MODULE 12 - 15VDC

This electronic timer-switch module may beused for exposure devices, battery chargertiming, machines, toys, illumination, etc.It connects other devices by means of theinstalled, potential-free relay switch. Therelay connects at the beginning of a timingcycle after the start push-button has beenpressed and disconnects again automaticallyat the end of the pre-set time. The timingcycle may be stopped at any time by press-ing the stop push-button. In addition a 500kOhm linear potentiometer (HB170) and 2push-buttons, 2 x (HB209) or 2 x (GB723),for “start” and “stop” required (not included).Specifications:Supply Voltage: 12 - 15VdcSupply Current: 20mA (relay is off)

80mA (with the relay switched on)Output Relay: single connection (SPST)Switching Capacity: max. 3A / 25VTiming Duration:

without the 500k Ohm potentiometeradjustable 2 sec. - 10 minusing the 500k Ohm potentiometeradjustable 10 - 30 min.

2 LED indicators: Green for power andRed to indicate when the relay is on



02.80

ADJUSTABLE ELECTRONIC TIMER12V / 5A RELAY CONTACTS

This electronic timer module can be set foran adjustable time from 0.1 seconds to 20minutes. Course time adjustment is doneusing 2 jumpers to select 1 of 4 time ranges.Fine time adjustment is done using a presetpotentiometer. This timer’s trigger and resetinputs can be activated by connecting it tothe negative supply voltage rail. After thetimer has been triggered, the on-board relaywill be active for the selected time duration.The relay is deactivated after the selectedtime has ended. The relay activation timecan be ended prematurely by resetting thetimer. An on-board red LED indicates the on-state of the relay. The on-board relay canswitch current loads of up to 5 Amps maxi-mum at 12VDC. An on-board fuse is includ-ed for current protection. Two N.O. push-but-ton switches are required for trigger andreset (code: HB209) and also a 12VDC or16 to 26VAC power supply.


ADJUSTABLE ELECTRONIC TIMER220V / 10A RELAY CONTACTS

This electronic timer module can be set foran adjustable time from 0.1 seconds to 20minutes. Course time adjustment is doneusing 2 jumpers to select 1 of 4 time ranges.Fine time adjustment is done using a presetpotentiometer. This timer’s trigger and resetinputs can be activated by connecting it tothe negative supply voltage rail. After thetimer has been triggered, the on-board relaywill be active for the selected time duration.The relay is deactivated after the selectedtime has ended. The relay activation timecan be ended prematurely by resetting thetimer. An on-board red LED indicates the on-state of the relay. The on-board relay canswitch current loads of up to 10 Amps maxi-mum at 220VAC. An on-board fuse is includ-ed for current protection. Two N.O. push-but-ton switches are required for trigger andreset (code: HB209) and also a 12VDC or16 to 26VAC power supply.


PRECISION TIMER0 TO 40 MINUTES

Adjustable time switch for switching opera-tions from approximately 1 second toapproximately 40 minutes. The deviceswitches on after pressing the key andswitches off again when the adjusted timehas expired. The lapse of time may be inter-rupted any time with the reset key.Operating voltage: 12VRupturing capacity: max. 25V 3A


UNIVERSAL START / STOP TIMER

This is a compact timer kit with one start andone stop push-button switch. It also has anadjustable time delay between 1 second and15 minutes. The output relay is switched onand the time delay is started simultaneouslyby pressing the start push-button. After thepre-set time delay has expired the relay willswitch off. The relay can be switched off atany time by pressing the stop push-button.Specifications:Supply Voltage: 12VdcSupply Current:

while the relay is off: 20mAwhile the relay is on: 55mA

Adjustable Time Delay: 0 - 15 minutesLED Indicator: shines while the relay is onOutput Relay Switch: SPDT, with COM., NO.

and NC. contact connectionsRelay Contact Rating: max. 2A / 240VPCB Dimensions: 38 x 69mm


CLASSIC RC-TIMER12 - 15VDC SUPPLY, 240V / 10A

This is a classic monostable, RC-timer circuitusing the discharging of an electrolyticcapacitor as timing element. Transistorssense the capacitor voltage and switch therelay. The timing cycle is started by pressingthe push button. The relay is switched ononly during the timing cycle. The output isdisconnected, (open circuit), during the tim-

ing cycle. After the timing cycle has finishedthe output is connected to the positive 12Vsupply rail.Specifications:Supply Voltage: 12 - 15VdcTiming Range: (adjustable) 2 sec. - 6 min.Output Relay: 1 output connection with

240V / 10A max. contact ratingPCB Dimensions: 43 x 48mm


555 TIMER CIRCUIT

This is a classic monostable 555 timer circuitthat switches a relay for an adjustable periodof time. The time delay is determined by thevalues of the capacitor and resistor connect-ed to the 555 IC. The threshold trigger levelsare changed by connecting a voltage dividerto pin 5 of the 555 IC. A start push buttonstarts the timing cycle. The relay is onlyswitched on during the timing cycle. A stoppush button can stop the timing cycle beforethe total time delay has elapsed. The relayoutput has common, normally-open and -closed connections.Specifications:Power Supply: 12 - 15VdcTiming Range: 1 sec to more than 5 minutesOutput Relay: SPDT, N.O., N.C., COM with

240V / 10A max. contact ratingPCB size: 43 x 61mm


TIME SWITCH 8 TO 8192 SECONDS(2.3 HOURS) 12 VDC

This is a long duration monostable timer kit.The 555 timer IC is used as an astable oscil-lator that is set to 1Hz (1 cycle per second).The 555 output drives a 4020 IC that is a 14-stage binary ripple counter. Eleven of thecounter’s outputs are jumper selectable forperiods between 8 and 8192 seconds. Oneof the following timing periods can be used:8, 16, 32, 64, 128, 256, 512, 1024, 2048,4096 or 8192 seconds. Once the circuit ispowered the timing period starts. After onetiming period has finished the relay outputchanges state and the timer stops. The out-put relay can be set to be either on or offduring the timing period. The timer is resetby switching it off and on again, that is thesame as disconnecting the power supplyand powering it again when required.Specifications:Supply voltage: 12 VdcOutput Relay: SPDT, N.O., N.C., COM with

02.81

240V / 10A max. contact ratingPCB size: 53 x 58mm


THREE TIMER KITS

This set of 3 monostable timers consists ofthe following kits:(EB620), (EB619) and (PB211).


KITCHEN TIMER

This kit can be used for 1 minute to 1 hourtiming. Single button, straightforward opera-tion. Clearly visible 16-led readout. Audibleand visible alarm with discrete pre-alarm.Auto power-off. Attractive designer enclo-sure.Specifications:it makes use of microcontroller technologySettings:

1-10’: one minute steps10-30’: five minute steps30-60’: 15 minute steps

Basic Accuracy: better than 5%Power Supply: 3 x AAA 1.5V batteries (notincluded)Supply Current: 10mADimensions: 76.5 x 75 x 32mm


4 DIGIT PROGRAMMABLE TIMER

This 4-digit, programmable, down countingtimer kit makes use of a preprogrammedmicrocontroller. It has a 4-digit, 7-segment,red, 14mm LED display. It only displays sec-onds and counts down from a maximum of10 000 seconds, (2.7 hours), after theSTART button has been pressed. Also hasSTOP button. It has 4 operating modes thatcontrol the, active low open collector, outputwhen the timer reaches 0:1) Timer stops at 0 and the output is setactive low. Reset to continue2) Timer counts down to 0, sets output low,raps around to 9999 and counts down3) When it reaches 0 the output is low for

20ms and the count is reset to initial value4) Timer counts down to 0, sets output lowfor 20ms, raps around to 9999 and countsdown. Reset to return to initial valueSpecifications:Supply Voltage: 9 - 12VdcSupply Current: 50mA max.Output: transistor open collector 0.1A max.Dimensions: 52 x 67 x 12mm


0 TO 60 HOURS START/STOP TIMER

If a device has to be switched off after aspecified amount of time, then this timer kitis the ideal solution. Because of the largerange of the timer, it may be used in almostany applications, such as switching off televi-sion and hifi-equipment, lights (staircaselighting), safety timer for coffee machine,dark-room timer, providing a short ringingsignal, etc. Push buttons are provided forstarting and early stopping, but it is also pos-sible to control the circuit by means of arelay or a transistor open collector output.Specifications:Power Supply: 24Vac / 50mA or 220VacOutput Relay: SPDT, N.O., N.C., COM with

220V / 5A max. contact ratingTiming Range: 3 seconds - 60 hours


MAINS POWERED TIMERS

FAN TIMER

This mains powered timer kit is controlledwith one 230V-rated switch (not included). Ithas a triac output for driving 230Vac fanmotors and lighting. The output is off directlyafter the power has been connected to thistimer. The output is only powered once theswitch has been switched on. The outputremains powered as long as the switch ison. A count down timer starts once theswitch is switched off. After an adjustabletime delay the output will automatically turnoff. This turn-off timer is ideal for use in thekitchen or bathroom for lighting. It is alsosuitable for most types of fans. It can beconnected to existing installations. The triacoutput has a noise suppression filter.Specifications:Supply Voltage: 230VacOutput Current: max. 1AOutput Power: max. 200WattLED: shines when the output is poweredAdjustable Time Delay: 10sec. to 5min.Dimensions: 80 x 60mm, 25mm height


TIME SWITCH WITH TRIAC0 - 10 MIN 220 VAC

An easy to build, inexpensive but neverthe-less reliable and powerful time switch formany applications. The delay time isadjustable and can vary from a minimum of40 seconds up to 10 minutes maximum. Thepower load can be anything up to 900 Watts.The circuit draws its power from the mainsby means of an RC network. The switchingis done by a heavy duty triac avoidingmechanical relays that can cause arching,delays and interference. The heat sink issupplied. The timer’s output is poweredimmediately after the timers power has beenconnected. After an adjustable time delay theoutput will automatically turn off. The outputcan be powered by pressing the push-buttonswitch. The count-down timer is restartedafter the button has been released. The out-put is turned off again after the time delay.Supply voltage: 220VacOutput Current: max. 4AOutput Power: max. 900WDelay time: 40 sec to 10 minDimensions: 72 x 87mm, 45mm height


AUTOMATIC LIGHT TIMER-SWITCH 230VAC

This electronic time-switch module may beused for automatic staircase lighting, forexposure devices, alarm alert timing etc. Ithas a built-in potential-free, SPDT relayswitch that can be used to switch otherdevices on or off. The relay is activated atthe beginning of a timing cycle, after the startpush-button has been pressed, and is deac-tivated again automatically at the end of thepre-set time. The timing cycle may bestopped at any time by pressing a stoppush-button.Specifications:Power Supply: 230VacOutput Relay: with COM.,NO.,NC. (SPDT)Switching Capacity: max. 3A / 230VacTiming Duration:

using a 1M Ohm linear potentiometer toadjust: 1 sec. - 30 min

Required (not included):1M Ohm linear potentiometer (HB171) andtwo electrically insulated push-buttons2 x (GB723) for “start” and “stop”

02.82


MAINS TIMER (200V / 240V)

A 1 to 5 minute timer for the mains 200/240Vpower supply using standard electronicbuilding blocks. Uses LM358 and a 2N6075triac. Has START & RESET buttons.Educational kit mounts on box provided toshow how it works. Caution: Uses mains200/240V power supply. Kit must be safelyplaced in closed box for routine use.


PERIODICRELAY SWITCHES

INTERVAL SWITCH

The device is suitable for use as: intervalswitch for wiper/washer for cars, pulseswitch for lamps, motors, etc. Pulse genera-tor for alarm systems, etc.Pulse time: approx. 1 to 140 secondsPulse period: approx. 0.2 to 12 seconds(adjustable)Operating voltage: 7.5 to 15 VRelay: max. capacity of 6 A. Pulse indication: LED


INTERVAL TIMER

This is a periodic interval timer kit. It can beused for the intermittent switching of circuitsand equipment: blinking light, video / photosingle frame shooting, slide projector control,miniature models, etc...This design makes use of the well-knownNE555 timer IC (integrated circuit). The 555IC is used as an astable oscillator thatswitches the on-board relay switch on andoff periodically. The relay is switched on dur-

ing pulse time and it is off during pause time.The pulse and pause times can be adjustedindependently of each other.Specifications:Supply Voltage: 12 - 15VdcSupply Current: 100mAAdjustable Pulse Time: 0.5 to 5 secondsAdjustable Pause Time: 2.5 to 60 secondsLED Indicator: shines during pulse timesOutput Relay Switch: SPDT, COM. with dry

switch-over NO. and NC. contactsRelay Contact Rating: max. 3A / 24VDimensions: 40 x 58mm, 25mm height


MULTIFUNCTION TIMERS

MICROCONTROLLER-BASEDMULTI MODE TIMER

This programmable timer kit makes use of apreprogrammed microcontroller. It has 7 tim-ing modes and 4 time delay ranges that areselected with on-board DIP-switches. Noother adjustments are required. An on-board,optocoupler, trigger input is provided forelectrical isolation between the triggersource and timer kit. It also has a reset inputand a relay output switch.Specifications:Supply Voltage: 12VdcSupply Current: 300mATrigger Voltage: 6 - 81VTrigger Current: 5 - 80mATrigger Voltage Isolation: 2500VTrigger Pulse Width: min. 20msec.Output Relay: SPDT, N.O., N.C., COM with

240V/10A max. contact ratingTiming Modes:1) Level-trigger signal enables relay andstarts timing. Relay operates for set timethen releases. If trigger signal is removedthe timing resets and relay releases.2) Same as (1) except that when the edge-trigger signal is removed the timing is notreset. Triggering during timing causes thetimer to restart (retrigger) timing.3) Level-trigger starts timing. At end of settime the relay connects until trigger signal isremoved or if reset. If trigger signal isremoved during timing, the timer resets andrelay connects.4) Trigger signal enables the relay, but timingonly starts after trigger signal has beenremoved. Relay releases after set time.5) Trigger signal enables relay to oscillatewith on and off time equal to set time, (50%duty cycle). Oscillation stops if reset or whenthe trigger signal is removed.6) Level-trigger signal enables relay andstarts timing. Relay operates for set timethen releases. If trigger signal is removedthe timing pauses and relay is on. When trig-ger signal is re-applied timing will continueuntil the total set time then relay releases.7) Trigger signal enables relay to oscillate,starting with off-time, that is equal to the settime. After the set time the relay is connect-ed for 2 seconds and then it releases as thecycle is restarted. Oscillation stops if reset or

when the trigger signal is removed.Oscillation will continue from where itstopped when trigger is re-applied.Timing Ranges:1 - 255 seconds10 - 2550 seconds1 - 255 minutes10 - 2550 minutesDimensions: 48 x 97 x 25mm


MULTIFUNCTION RELAY SWITCH

This is a programmable, multifunctional timerkit. It makes use of a preprogrammed micro-controller. Two pre-programmed delays andlearning mode for delay times. EEPROMdata storage to prevent memory loss if thepower is removed. Functions are selectedwith 4 on-board DIP-switches.It has 15 different functions:1) Momentary Mode: relay is on only whilethe button is being pressed2) Toggle Mode: (latching) push once toswitch relay on then push again to switch off.3) Start/Stop Timer: relay starts when thebutton is pressed and stops after the pre-settime, even if the button is held down.4) Staircase Timer: Push button to switch therelay on and after pre-set time it will go off.Pushing button while on will restart the timer.5) Dual-Time Staircase Timer: Short pushstarts with delay time 1. Long push startswith delay time 2. Relay switches off afterselected delay time has elapsed.6) Non Re-triggerable Timer: Push button toswitch the relay on and after pre-set time itwill go off. Pushing the button during on-timehas no effect.7) Turn-on Delay: Push the button continual-ly for a pre-set time then the relay will switchon. Switches off when the button is released.8) Timer with Early Retrigger Prevention:Push button to turn on with pre-set delay 1.After time delay 1 has elapsed the relay isheld off for minimum time delay 2.9) Turn-off Delay: Push button to switch therelay on. The pre-set time starts after thebutton has been released and after pre-settime it will go off. Pushing the button duringthe timing period will restart the timer.10) Interval Timer: The relay switches onand off periodically only while the button isbeing pressed. On: delay 1. Off: delay 2.11) Blinking Circuit: The relay switches onand off periodically only while the button isbeing pressed at a fixed frequency of 1Hz.12) Blinking Circuit with Timer: Relay switch-es on and off periodically at a fixed frequen-cy of 1Hz if the button is pressed. After thebutton has been released, the timer startsand turns off after the pre-set time haselapsed. Pushing the button while the timeris on will restart the timer.13) Random Timer: The relay switches onand off in a random manner only while thebutton is being pressed. 9 min. to 2.5 hoursbetween every transition.14) Trigger-at-release Timer: Push the buttonthen release it to switch the relay on. Therelay switches on and the pre-set time starts

02.83

after the button has been released. After thepre-set time it will go off again. Pushing andreleasing the button while the timer is on willrestart the timer.15) Interruptable Real Time Staircase Timer:Short push starts with delay time 1. Longpush starts with delay time 2. Relay switchesoff after selected delay time elapses even ifthe button is held down continually. Thetimer can be stopped by briefly pushing thebutton.It has 1 on-board tactile switch and an inputfor an external push-button switch like(GB723), (not included). The SPDT outputrelay switch has transient protection for itsCOM., N.O. and N.C. contacts. Screw termi-nals are used for connections. Suitable forcontrolling incandescent ,halogen and fluo-rescent lighting, fans, valves, buzzers, etc.Specifications:Supply Voltage: 9 - 12ac or 12VdcSupply Current: 100mA max.Trigger Pulse Width: min. 20msec.Trigger Voltage: pull input active high to the

positive supply rail, input range: 5 - 12VdcTrigger Current: 3 - 10mA2 Delay Times: each programmable for

2 sec. up to 12 daysOutput Relay: SPDT, N.O., N.C., COM with

max. 2.5A / 220Vac contact ratingTransient Filter for the relay contactsDimensions: 87 x 41mm, 30mm height


MULTIFUNCTIONALTIMER MODULE 230VAC

This multifunctional timer module is ideal forcontrolling light bulbs, halogen lamps, fluo-rescent lighting, fans, electric valves,buzzers, etc, ...It makes use of a microcontroller. Thanks tothe EEPROM, this module’s delays arememorised, even in the event of a powerfailure.This timer has 15 operating modes for tim-ing, switching, blinking, interval, randomswitching, staircase light control, etc...Output Relay contacts are protected againstvoltage spikes that are caused by the switch-ing of inductive loadsIt can be mounted in a switch box on a DIN

rail or on a wallSpecifications:Power Supply: 240VacOutput Relay Contact Rating: SPDT with C,N.O. and N.C. max. 5A / 230VOutput Power: 1100VA max. at 230VacLearning mode for timing delays of 2s up to

12 daysTime Resolution: ±2 secondsTwo pre-programmed delaysDimensions: 106 x 101 x 44.5mmWeight: 282gRequired (not included):push-button switch for controlling (GB723)

MODULE ORDER CODE: GC113MANUFACTURED BY: VELLEMAN

MICROPROCESSORCONTROLLER / TIMER

This timer kit is controlled by a microproces-sor. It has a backlit liquid crystal displaywhere all data, such as: output relay number,the on/off state or temperature setting of aspecific relay switch, the day of the weekand time of day are displayed. It has an alu-minium operating panel with four membranekeys that are used for programming this kit.It has four output relay switches that arecontrolled independently of each other. Eachrelay has a timing program, that is definedby the user, that determines when it shouldbe switched on or off. The program, for eachrelay, can be up to 50 lines long. Up to fourexternal temperature sensors can be con-nected to this kit for sensing the temperatureat four different places. Each relay channelcan be programmed to control temperature,within user defined temperature limits, byusing the sensor information and accordinglyswitching an external heating device.Specifications:Supply Voltage: 220VacBattery for Memory Back-up: 9V (EB160)

(the battery is not included)Display: 1 line, 16 character, backlit LCDTime: 24 hour clock with day indication4 Opto-coupler temperature sensor inputs:Sampling Rate: one sample per secondOptional: (to measure / control temperature)then use up to four of the following kits:

Temperature Sensor (GC098) orTemperature Sensor with Display (GC100)

This unit detects the presence and tests forthe proper operation of the connectedtemperature sensors

4 Output Relay Switches: RF-noise freeSPDT with COM. NO. and NC. contacts

Relay Contact Rating: max. 5A / 220V4 LEDs: Indicate which relay-switches are on50 Programming steps per relay switch

(thus 4 relays have 200 in total)There are program instructions for switching

or temperature controlling events:1) for a specific time of day on every day,

like 12:34 all seven days of every week2) a specific time of day only on a specific

day of every week, like 12:34 on TuesdaysProgramming Resolution:

Time: 1 minuteTemperature: 0.1ºC

Each output has programmable temperature:Measuring / Control Range: -40 to +150ºCAccuracy: ± 0.1ºCHysteresis Range: 0 to 25ºC, (0.1ºC steps)

Dimensions:Operating Front Panel: 120 x 235mmPCB Dimensions: 102 x 214mmBuilding-in Depth: 50mm min.


TESTING INSTRUMENTSAND DEVICES

HANDHELD LCD OSCILLOSCOPE

This is a compact handheld oscilloscope kit.It has handy features which enables you toperform on-the-spot measurements that arequick, easy and accurate. Its high-contrast,wide viewing angle LCD screen enablesoperation under normal daylight conditions.All functions are accessible by means of atactile keyboard with a pleasant touch feel-ing. The current operating mode is displayedon-screen. If desired, auto-setup mode takescare of all scope settings for instant visuali-sation of waveforms. The marker functionenables you to make accurate measure-ments of voltage, time and frequency. Canbe used as a digital voltmeter that displaystrue rms, dB, peak-to-peak and DC volts.With its built-in variable gain sine generator,it allows easy service of audio equipment,etc... A RS232 port enables screen data tobe sent to a PC for use in different applica-tions. It has a built-in battery charging circuitwith indicator LED for rechargeable batteries(batteries are not supplied).Features:True RMS or peak to peak readoutdB measurementsmarkers for voltage and timeauto setup functionDC readout with zero reference functionfrequency readout through markerssample-dot join functionscreen hold functionwaveform memory (only 1 location)grid or ruler functionadjustable trigger leveltrigger mode: normal, auto or singletrigger edge: rising or fallingRS232 data output to computerauto power off after 8 min. (can be disabled)Specifications:Supply Voltage: 9Vdc (unregulated adapter)Battery Back-up: 6 of 1.2V AA NiMH cellsCharge Time: 14 hours min.Supply Current: 300mAMaximum Sampling Rate:

for repetitive signals: 5MHzfor single shot events: 0.5MHz

02.84

Input Amplifier Bandwidth (-3dB):750kHz at 0.4V / Div. setting

Auto Set-up Function Bandwidth:for repetitive signals: 400kHz

Input Impedance: 1M Ohm // 20pFMaximum Input Voltage: 100Vp (AC + DC)Input Coupling: DC, AC and GNDVertical Resolution: 8 bit

(6 bits displayed on LCD)Linearity: ±1 bit (for 8 bit data samples)A/D-Converter Accuracy: ±2 bitLCD Graphics: 64 x 128 pixels, high-contrastdB Measurement Range: -73dB to +40dBTrue RMS Range: (only for AC signals)

0.1mV to 80V (2.5% accuracy)Peak to Peak and DC Measurement Range:

0.1mV to 180V (2% accuracy)Timebase Range: (for repetitive signals)

20 and 50µs,0.1, 0.2, 0.5, 1, 2, 5, 10, 20, and 50ms,0.1, 0.2, 0.5, 1, 2, 5, 10 and 20s / Div.

Input Sensitivity: 5, 10, 20 and 50mV,0.1, 0.2, 0.4, 1, 2, 4, 8 and 20V / Div.

Sine Wave Output: ±400Hz andadjustable voltage: 0 - 1Vrms // 10k Ohm

Square Wave Output: ±400Hz, 3.5VppOperating Temperature Range: 0 - 50°CDimensions: 130 x 230 x 43mmWeight: 600g (excluding battery weight)Optional: (not included)Insulated measurement probe: (EB310)Power Adapter: 9Vdc / 500mA (GB836)Hints:If the scope shows ‘startup’ troubles, (the on-led lights, but the display remains blank),when run on batteries, try replacing T6,BC547B or BC547C with a BC517, (DB464),and replace ZD1, 5V6 with a 6V2, (HB344)type.


CONTINUITY TESTERWITH PIEZO BUZZER

Continuity tester with piezo buzzerKIT ORDER CODE: FB606


CONTINUITY TESTER

A continuity tester is one of the most usefulpieces of test equipment to have. It is usedfor testing the electrical continuity betweentwo points. Our tester will ``buzz`` up to aspecified resistance or less. Two on-boardresistance ranges available. Full theory ofoperation given. The user may adjust theresistance ranges to suit his own require-ments.Power supply: 9V battery (not supplied).


LOGIC PROBE

This is the most important piece of equip-ment for testing and measuring digital equip-ment. It is usually used in fault finding andtesting but can also assist in design workand to find out how digital equipment works.Switch for either TTL or CMOS. Our ownmodern design using a PUT. Includes detec-tion circuit for very fast pulses. Gives visual(3 LEDs) and audio (piezo buzzer) response.


LOGIC PROBE 8-15 VDC

A must for those who work with digital cir-cuits. It will detect and display the logicstates of “1” and “0” by lighting respectiveLEDs and will also give and indicate with athird LED if it detects a pulse train. Suitablefor TTL and CMOS circuits.Power supply: 8 to 15 VDC / 20mAPCB size: 80x20mm


TRANSISTOR TESTERWITH TESTING CLIPS 9 VDC

This is a circuit that will help you sort thetransistors you have in your electronic work-shop, and will also help you choose the bestof them for your projects. It will also showyou if the transistor is PNP or NPN. The cir-cuit can be used to check some types ofdiodes. The printed circuit board is small andif you use a small box to put it in you willhave a convenient and portable transistortester.Power supply: 9VDC / 50mA


OSCILLOSCOPE COMPONENTTESTER 8V AC

The most important instrument for the elec-

tronics laboratory is the oscilloscope. With agood oscilloscope, the experienced techni-cian can make many measurements whichare otherwise difficult if not impossible to do.One of the most important features found ina good oscilloscope is the COMPONENTTESTER. The component tester is an addon circuit which by using a small AC voltageand placing the components in a simple cir-cuit performs a dynamic test giving a quickand positive QUALITATIVE and approxi-mately QUANTITATIVE indication of thecomponent’s nature, its state and value. Thehorizontal and vertical dimensions andshape of the displayed figures are important.Components that can be Tested:Passive Components:

Inductors (Coils), Capacitors (Condensors)and Resistors

Semiconductors:LEDs, Plain-, Schottky-, Zener-Diodes,Diacs etc.

Working Voltage: 8Vac (mains transformer isincluded)Current: 50 mAPCB Dimensions: 40 x 45mm


MAINS VOLTAGE DETECTOR

With this device wires can be very easilychecked for mains voltage. It can be used tosearch for wires installed in or behind wallsor to trace interruptions in wiring. A flashingLED indicates whether or not voltage is pres-ent. The flashing speed indicates how closeby the wire is. If an audible signal is alsodesired, space has been provided on thePCB for a buzzer to be connected.Specifications:Detection of Mains Conducting CablesLED Indication (buzzer optional)Adjustable Detection Distance: max. 10cmDistance IndicationSupply Voltage: 9V battery (not included)Dimensions: 56 x 64mm


METAL SEARCHING DEVICE 9VDC

The device locates any metal element upto amaximum of 6 cm in walls, floors, etc.Indication is realized through LED. The sen-sitivity is adjustable. With the help of the fer-rite antenna exact locating is possible.

02.85

Operating voltage: 9VDCKIT ORDER CODE: FB539


METAL DETECTOR

This metal detector kit is ideal for beginners.It is undesirable to penetrate a water pipe orelectric cable while drilling a hole into a wall.It can have catastrophic consequences.Likewise, drilling into gas pipes or centralheating pipes can be extremely hazardous.This handy metal detector can be used todetermine beforehand whether there aremetal objects concealed inside a wall, ceilingor floor. It is operated with a single pus-but-ton switch. A LED indicates if a metal objectis in the vicinity of the detector.Specifications:Power Supply: 9V battery (EB160) (not

included)Supply Current: 30mA max.Metal Detection Range:

is adjustable up to 8cm maximumOn LED-Indicator: the brightness of the LED

indicates the distance and the size of themetal object

PCB Dimensions: 56 x 64mmHints:If you experience difficulties with the calibra-tion of the unit (if the LED does not turn off,if there is not any metal present), replace C1with a ceramic 1.2nF, (AA467), capacitor.This problem is due to the manufacturing tol-erances on the component values and differ-ences created when winding the coils.


PINK NOISE GENERATOR

This kit is used to analyse the acoustic prop-erties of a room (usually a living room). Agood pink noise generator together with aspectrum analyser is indispensable.Moreover, a microphone with as linear a fre-quency characteristic as possible (from 20Hzto 20kHz) is needed. If you have an graphicequaliser available, then the response cannot only be checked but also corrected.Easily adapted to produce “white noise”.Specifications:it generates Pseudo Random Digital NoiseRegulator Sliding Length: 33 bitClock Frequency: adjustable 30 - 100kHzPink Noise Filter: 3dB / octave (20Hz to20kHz)

Output Voltage: 150mVrmsOutput Impedance: 1KohmPower Supply: 12 - 15VDC or 9 - 12VACSupply Current: 5mADimensions: 72 x 43mmrecommended Housing: (G410)


SIGNAL TRACER / INJECTOR KIT

This signal tracer / injector has beendesigned to inject or detect a specific signalinto an audio circuit in need of repair (suchas amplifiers, radios, tone controls, andmore) so as to detect the fault. In this wayproblems can be traced more easily. The sig-nal tracer may also be used as a simplemonitor or amplifier.Injector: 0-2.5Vrms output (adjustable)Output impedance: 1.5K OhmFrequency: approximately 1KHzTracer: 3.5mV to 10Vrms sensitivityGain: 40dBInput impedance: 50K OhmOutput power: 0.5W / 8OhmsPower supply 9-12VDC or 7-9VAC / 150mAPCB size: 60x53mm


CABLE POLARITY CHECKER

This kit consists of two parts that must beconnected to the ends of a pair of cables. Ithas 4 indicator LEDs: to check cables forcontinuity (short between 2 wire ends), tocheck for open circuits and identify individualwires using the 2 polarity check LEDs, (cor-rect or wrong polarity), and the end connect-ing clips. Ideal for speaker cable polaritychecking. Pushbutton operation with autopower off.Specifications:Power Supply: 9V battery (not included)Supply Current: 10mA max.Dimensions:

Main Board: 56 x 40 x 33mmRemote Board: 40 x 7mm


MISCELLANEOUS KITS

LED SERIES PRINTED CIRCUITBOARD 230VAC

LED signal lamp which can be directly oper-ated at 230VAC. Use: signal lamp, operationindication for 230VAC devices etc.


EXPERIMEN-TATION

PROJECTS

EXPERIMENTATIONPROJECTS

10-IN-1 ELECTRONICPROJECT LAB KIT 3VDC

A great introduction into the world of elec-tronics. Educational , fun with solderless,spring terminal connections that make it safeand easy to operate. Easy to read fully illus-trated labstyle manual is included.Build 10 exciting circuits: morse code, bur-glar alarm, radio, ...

ORDER CODE: AB033MANUFACTURER CODE: EL101


This electronic kit is safe, solderless, excit-ing, educational and fun! Spring terminalsmake it safe and easy to operate. No tool orsoldering requiredEasy-to-read illustrated operating manualincludedLearn as you perform 20 exciting experi-ments involving light, magnetism, sound andtouchLearn and build your own SENSOR ROBOTsafely and easily

02.86

Power Supply: 1 x 9V battery (not included) ORDER CODE: AB034

MANUFACTURER CODE: EL201


A great introduction into the world of elec-tronics. Safe, educational and fun with sol-derless connections. Easy to read fully illus-trated labstyle manual is included.Build 30 exciting circuits: a radio, burglaralarm, water detector, morse code practicecircuit, simple computer circuits and muchmore.Power Supply: 2 x 1.5V AA cells (not includ-ed)

ORDER CODE: AA911MANUFACTURER CODE: EL301


A great introduction into the world of elec-tronics and the fun way of learning aboutelectronics and of studying the wonders ofscience. No experience required. Fun withsolderless, spring terminal connections thatmake it safe and easy to operate. Easy toread, fully illustrated, step-by-step, labstylemanual for easy project construction isincluded.Build 130 exciting circuits: build a radio, anAM broadcasting station, an electronicorgan, a kitchen timer, logic circuits andmuch more.Comes with built-in speaker, 7-segment LEDdisplay, two fully integrated circuits androtary controlsPower Supply: 6 x 1.5V AA-cells (not incl.)


ELECTRONIC LAB KIT300-IN-1-WORKSTATION

Features:

Educational and fun projects, safe andsolderlessBuild 300 exciting circuits - safely andeasilyPractical and illustrated lab-style manualincluded300 electronics experiments in 1 packageSpecifications:Using this workstation gives one a greatintroduction into the world of advanced elec-tronicsEasy, quick and step-by-step learning of thebasics of electronics / no soldering or toolsare requiredEverything you need to build 300 excitingelectronic projects:a transistor radio, an IC organ, a burglaralarm, a battery checker, a delayed timer, anelectronic game, a voltage-controlled amplifi-er, multiplier, a multiple counter, a digital lightdimmer, a tone burst generator, an audio sig-nal tracer, an electronic candle, a voice levelmeter, a metal detector, a rain detector, avoltage drop alarm, a logic checker, a func-tion generator and much more Power Supply: 6 x 1.5V AA cells (not includ-ed)

ORDER CODE: GB658MANUFACTURER CODE: EL3001

DIGITAL TRAINER

This is a solderless, multi-purpose DigitalTrainer, (work station), that is ideal for digitalcircuit prototyping. The main purpose of thisDigital Trainer is to provide the junior col-lege, training center, factory and amateurhobbyist with the most convenient way oflearning digital logic design and training.Specifications:The Digital Trainer consists of:Book: “User’s Guide and Experiment of

Basic Gates”Power Supply: 230Vac to 9Vdc/1.5A adaptor

(is supplied)Solderless Breadboard: 117x172mm,Two Bounce-free Push-buttonsEight 0V/5V Logic Level DIP-switchesUser Power Supply: 5Vdc / 750mAPower Clip Terminals for Logic ProbeEight Buffered LED DisplayTwo Adaptors: pin tip hole to banana socketTwo Adaptors: pin tip hole to BNC socketClock Generator with Selector Switch:

10 - 40Hz and 1 - 20kHz, 0 - 5VppFine Clock Frequency Adjusting KnobLogic Probe LP-2800: (AA713) (is supplied)Dimensions: 310 x 255 x 50mm (LxWxH)Weight: 0.9kg

ORDER CODE: AB336MANUFACTURER CODE: DT-01

DIGITAL LAB

This is a solderless, multi-purpose Lab,(work station), that is ideal for digital circuitprototyping. The main purpose of this Lab isto enable the user to conveniently acquire asolderless breadboard with DC power sup-ply, signal generator, digital volt meter, eightLED display, two 7-segment LED displaysand logical function switches.Specifications:Power Supply: 220 - 240Vac / 0.5A max.The digital Lab consists of:Book: User Manual and PracticeBreadboard: 117x163mm, 1896 connectionsDual Adjustable DC Supply: 0 to +/- 15VdcDual DC Fixed Power Supply: +/- 5VdcDC supplies are short-circuit protectedFunction Generator: 1 Hz - 100kHz, 0 - 6Vpp

select from sine, triangle and square wave3½ Digit LED Voltmeter: 0.2, 2, 20 and 200VTwo 7-Segment LED DisplaysTwo Adaptors: pin tip hole to banana socketTwo Adaptors: pin tip hole to BNC socketEight Buffered LED DisplayEight data line DIP-switchTwo voltage selector switchesTwo tactile push-button switchesDimensions: 480 x 360 x 200mm (LxWxH)Weight: 4.2kg

ORDER CODE: AB365MANUFACTURER CODE: IDL-800

ANALOGUE LAB

This is a solderless, multi-purpose Lab,(work station), that is ideal for analogue cir-cuit prototyping. The main purpose of thisLab is to enable the user to convenientlyacquire a solderless breadboard with DCpower supply, signal generator, analoguecurrent- and voltmeter, potentiometer and

02.87

switches that are oftenly used, but not easilyinstalled.Specifications:Power Supply: 220 - 240Vac / 0.5A max.The analogue Lab consists of:Book: User ManualBreadboard: 117x163mm, 1896 connectionsDual Adjustable DC Supply: 0 to +/- 15VdcDual DC Fixed Power Supply: +/- 5VdcDC supplies are short-circuit protectedFunction Generator: 1 Hz - 100kHz, 0 - 6Vpp

select from sine, triangle and square waveAmpere Meter: 0 - 100µA, impedance:1OhmVoltmeter: 0 - 30Vdc, impedance: 320kOhmTwo Adaptors: pin tip hole to banana socketTwo Adaptors: pin tip hole to BNC socketTwo Slide Switches: 2-position (SPDT)One Slide Switch: 3-position (SP3T)One Rotary Switch: 6-position (SP6T)One Potentiometer: linear 1kOhmOne Potentiometer: linear 100kOhmOne Speaker: 8 OhmTwo voltage selector switchesDimensions: 420 x 360 x 200mm (LxWxH)Weight: 4.2kg

ORDER CODE: AB364MANUFACTURER CODE: IDL-600

NO SOLDERINGREQUIRED PROJECTS

ELECTRONIC AM RADIO KIT (CRYSTAL RADIO)

It's great fun to build your own amplitudemodulation (AM) radio and tune in to yourfavourite AM radio stations in the 500 -1600kHz frequency band. This experimentalkit is used to build an electronic crystal AMradio. A crystal diode converts radio frequen-cy (RF) power to audio power. Batteries arenot required since the radio is powered byradio waves received with a long antenna.Learn how radios work following the easy-to-read, illustrated operating manual. It is safe,solderless, exciting, educational and fun!One crystal earphone is supplied.


ELECTRONIC AM / FM RADIO KIT

Learn to build your own AM / FM radio usingthis experimental radio kit. It is an education-al, safe, solderless and fun project. 1

Earphone is included.Specifications:Frequency Range: 520 - 1650kHz (AM)

and 88 - 108MHz (FM)Power Supply: 1 x 9V battery (not incl.)


PHYSICS AND MAGNETISMPROJECTS LAB KIT

With this experimental kit, containing a set of43 elements, it is possible to perform 153physic and magnetism experiments.A booklet is included that describes everyexperiment in detail.Power Supply: 1 x 9V battery (not incl.)


SOLAR PLASTIC FAN

Use this plastic fan with electric motor(AA902). It can be attached to a 2mm motoraxis.Outer diameter: 58mm

ORDER CODE: AA926

Blister pack that contains one plastic fan thatcan fit onto a 2mm axis: 1 x (AA926).

ORDER CODE: AB749

BASIC ELECTRICITY 50-IN-1

This BASIC ELECTRICITY 50-in-1 kit wasdesigned to demonstrate elementary princi-ples in electricity. The 50 experiments thatcan be performed with this kit demonstratebasic principles such as:Conductivity properties of materials that arefound in and around the house.Electrical continuity in circuits.Electrical discontinuity in circuits resultingfrom poor electrical connections.Electrical shorts in circuits.Functioning of elementary electrical compo-nents such as switches, filament lamps,fuses, batteries, resistors and diodes.

This kit is ideal for the absolute beginnerwith no previous experience in electrical cir-cuitry. It is suitable for training students:grade 5 to 9 (standard 3 to 7). Every schoolteaching fundamental principals of electricityand every child in South Africa that is lackingthis basic knowledge needs this kit.This kit is rock bottom priced so that schoolsand pupils with limited funds can afford it.

ORDER CODE: AB788MANUFACTURED BY: ELECTRONICS123

THE LITTLE ELECTRO-TECHNICIAN4.5VDC

Easy instructional construction set for begin-ners. The cables are not soldered, onlyscrewed or twisted. The experiments aredescribed with diagrams and helpful descrip-tions. Some of the experiments that can beperformed are:1) ordinary circuit with small lamp2) electromagnetism3) current proof through compass needle4) radio transmitter system (Marconi)5) generator

02.88

6) self made battery and many more.Included: compass with coil, small lamp,electro-motor, luster terminals, litz, detailedinstructions.Supply voltage: 4.5V

ORDER CODE: AA314MANUFACTURED BY: KEMO

SOLDERINGFOR STARTERS

SOLDERING STARTER KIT 1

This soldering starter kit is ideal forbeginners.It contains:a soldering iron: 25Watt / 230Vacsolder wire: 17g of 1.0mm solder wirecontained in a dispensera soldering iron stand: (AA065)a pair of wire-cutters: (EB256)2 soldering kits: Flashing LEDs (FB662) andSound-to-light Unit (FB663)

ORDER CODE: GB613MANUFACTURED BY: VELLEMANMANUFACTURER CODE: K/START

SOLDERING STARTER KIT 2

This soldering starter kit is ideal forbeginners.It contains:a miniature 3.5 digit multimeter: 19 ranges,500V, 10A, 2M Ohm and diode/transistor testminiature long nose pliers: (EB257)2 soldering kits: Electronic Dice (FB669) andPocket VU-meter Wireless (EB524)Desoldering Solder Pump: (QB066)Precision Screwdriver Set: 2 cross and 4 flatscrewdrivers

ORDER CODE: GB614MANUFACTURED BY: VELLEMAN

MANUFACTURER CODE: K/START2

02.89

CLOCKS

QUARTZ CLOCK MECHANISM

This is a clock mechanism that can be usedinside self-made wall clocks. Damagedclocks can be repaired by simply replacingthe damaged clock mechanism with this one.The clock’s timing is regulated by means ofa quartz crystal. This unit has a suspensionclip that can be used for mounting the clock.Specifications:Power Supply: 1 x 1.5V AA-cell (not incl.)

use: 1.5V alkaline AA-cellsDimensions: 56 x 56 x 15mm

ORDER CODE: AC849

CLOCK WITH ALARM, DATE,STOPWATCH, COUNTDOWN AND

THERMOMETER

Features:Large display:

Top display: time clockmiddle display: month, date and daybottom display: temperature

Countdown: max. 29:59:59Temperature: switchable between ºC / ºFAlarm with snooze functionFreestanding deviceSpecifications:Power Supply: 3V CR2025 batt. (included)Dimensions: 110 x 55 x 28mm

ORDER CODE: GB711

CLOCK WITH HYGROMETER ANDIN / OUT THERMOMETER

Features:Large display:

Top display: time clockmiddle display: temperature ºC / ºFbottom display: relative humidity

Outdoor sensor with 3m weatherproofcable (included)

Memory for min. and max. temperature andrelative humidity

Built-in stand for desktop display, but canalso be mounted on a wall

Specifications:Power Supply: 1 x 1.5V AAA cell (included)Digit height: 15mmLCD size: 41 x 60mmDimensions: 108 x 58 15mm

ORDER CODE: GB712

TRAVELLING CLOCK WITH, DATE,TIMER, ALARM/COUNTDOWN

AND THERMOMETER

Features:Large LC-display with lightAlarm clock and snooze function200-year Calender (1900 - 2099)Temperature readout in ºC or ºFcountdown and count-up functionSelectable 12 / 24 hour formatSpecifications:Coloured blackPower Supply: 1 x 1.5V AAA cell (not

included)Dimensions: 92 x 85 x 17mm

ORDER CODE: GB728

MULTIFUNCTIONAL TRAVELLINGCLOCK WITH BACKLIGHT

Features:Large LC-display with backlightAlarm clock and snooze function200-year Calender (1900 - 2099)Temperature readout in ºC or ºF2 countdown functionsSelectable 12 / 24 hour formatSpecifications:Coloured blackPower Supply: 1 x 1.5V AAA cell (not


ORDER CODE: AB014

PEN HOLDER WITH CLOCKALARM, DATE AND TEMPERATURE

Features:5 Different modes:

Time mode: time, week and temperatureAlarm mode: set daily alarm with 8 tunesBirthday mode: birthday reminder-songTimer mode: countdown timer with ringThermometer mode: shows temperature

12 or 24 hour display modeSpecifications:Power Supply: 1 x 3V CR2025 battery (not


ORDER CODE: AB010

LIGHT PRODUCTS

LED AND HALOGEN HEADLAMP

Features:A 2 -in-1 LED / Halogen headlamp

03.1

CONSUMER PRODUCTS

Dual bulb headlampAdjustable headbandWaterproof battery compartmentwater-resistantLong-life LED: 100 000 hoursFocus control (for Halogen lamp)Operating time:

LED: 200 hours (alkaline cells)Halogen: 11 hours (alkaline cells)

Specifications:Power Supply: 4x1.5V D cells (not included)Bulb type:

LED: white 5mm diameterHalogen: 5.2V 5W G4 Halogen bulb

ORDER CODE: GB649

LED BIKE LIGHT

Features:Ultrabright LED bike lightLong-life LED: 100 000 hoursMounting braket fits all types of bicycleframesAngle and direction entirely adjustableEasy to take with and use a clip-on lightOperating time: 80 hours (alkaline cells)Specifications:Power Supply: 3 x 1.5V AA cells (included)Bulb type: white LED 5mm diameterDimensions: 82mm x 28mm diameter

ORDER CODE: GB650

WHITE LED LIGHT

Features:Ultrabright White LED lightCylinder-shaped with keychainSpecifications:Power Supply: 3 x 1.5V LR44 cells

3 x (GB718) (are included)Bulb type: white LED 5mm diameterDimensions: 55mm x 13mm diameterWeight: 35g

ORDER CODE: AB011

AUDIO PRODUCTS

DUAL 15-BAND GRAPHICEQUALISER WITH VU METERS

This is a stereo graphic equaliser thatenables one to control the frequency compo-sition of music. Each channel is divided into15 frequency bands. Each frequency bandhas its own slider knob that is used to adjustthe signal’s gain within a specific frequencyrange. Used for enhancing sound on stage.Features:

2 channels with 15 frequency bands each2 VU meters indicate output signal levelsthe housing is made to fit a 19 inch rackinput/output: actively balanced/unbalanced2 adjustable master signal level controls2 passive bypass switches2 signal clipping indicator LEDsbuilt-in low-cut filterSpecifications:Power Supply: 230Vac2/3 octave frequency band isolationfilter type: constant Qsignal gain range: ± 12dBlow-cut filter: 20Hz / -18dBtotal frequency range: 20Hz - 20kHz ± 1dBTHD + noise: < 0.01%signal-to-noise ratio: > 110dBDimensions: 482 x 123mm, 45mm heightWeight: 4.4kg

ORDER CODE: AC013

TOYS

TWO-WAY RADIO SET

Professional design with perfect receptionand long range (max. 2km). Perfect for out-door communication, like mountaineering,biking, hiking etc.Features:Personal Mobile Radio transmitter /

receiver set of two handsetsSelectable 8 channels 446 MHzLCD Display with blue backlight Call push-buttonVOX and Squelch controlBeep sounderLow-battery warning2 Earphones included2 blue and 2 red changeable front covers2.5mm Jack for microphone/earphoneSpecifications:Output Power: 500mW maximumOperating Frequency: 446 MHzNumber of Channels: 8Power Supply for Set:

total of 8 x 1.5V AAA cells (not included)Operating time: 15 hours maximum

when using alkaline cells (90% standby,5% transmission, 5% reception)

ORDER CODE: GB702

RADIO CONTROLLEDHELICOPTER

This Radio controlled helicopter is easy topilot thanks to its proportional control andcan fly over 15 meters!Features:Contains: 1 Helicopter, 1 remote control, 1helipad (charging/launching platform) and 1user manualSpecifications:The helicopter can change direction and hasvariable rotor speedOperating Frequency: 27.195 MHzDimensions: 400 x 365 110mmControl Range of Helicopter: max. 100mFlight time: on a full charge and in low windconditions the helicopter will fly between30 sec. - 2 minutesNote: Before the first flight you shouldcharge the helicopters battery 3 times.Built-in Safety Feature: built-in temperaturesensor automatically limits the rotor speedwhen the helicopters battery becomes toohot, causing the helicopter to land gentlyThe Remote control requires 6 x AA cells

(alkaline)The Helipad requires 8 x D cells

(alkaline)The Helipad contains a charging circuit for

the helicopters batteryThe Helicopter contains a built-in recharge-able battery (included)Full-charging time is about 3 minutesPlease note: This rechargeable 7.2V Ni-MHbattery is overstrained during charging andhas a very limited lifetime. 1 Hour chargingat 0.2A is better.Optional:rechargeable battery (AB285)remote control antenna (AC603)helicopter housing (AC604)helicopter motor (AC605)helicopter wing set (AC606)

ORDER CODE: GB824

REMOTE CONTROL ANTENNA

This is a spare telescopic antenna for theremote control unit of helicopter (GB824).M3 mounting bolt with 4mm length at base,fully extended length of antenna is 800mm

ORDER CODE: AC603

HELICOPTER HOUSING

This is a spare painted, polystyrene housingfor the helicopter (GB824).Dimensions: 60 x 150 x 65mm

ORDER CODE: AC604

03.2

HELICOPTER MOTOR

This is a spare electric motor with gearwheelfor the helicopter (GB824).Dimensions:

32mm length (excluding the shaft)20.5mm width x 15.5mm heightShaft: 2mm diameter x 7mm length

Weight: 33gORDER CODE: AC605

HELICOPTER WING SET

This is a spare set of rotor wings for the heli-copter (GB824). The set consists of a large,horizontally mounted main rotor and small,vertically mounted tail rotor.Dimensions:Main Rotor: 205 x 370mmTail Rotor: 98mm longest dimension

ORDER CODE: AC606

HOME AND GARDEN

IN / OUT THERMOMETER WITH MIN./ MAX. MEMORY

Features:Digital Thermometer -50ºC to +70ºCDual display: indoor / outdoor temperatureMin. / max. temperature memoryMountable on a wall or placed on a tableExternal waterproof temperature sensor

with extremely thin cable allows a user toshut the the window against the cable.

Specifications:Power Supply: 1 x 1.5V AAA cell (included)LCD size: 39 x 24mmCable length: 3mDimensions: 70 x 100 x 22mm

ORDER CODE: AB016

DECALCIFIER MODULE

This module is used to prevent calcificationand corrosion in water pipes like inside boil-ers and washing machines. It is not, in anyway, harmful to the environment. It does notuse any chemicals and its operation is basedon physical-induction of magnetic fields. It iseasy to mount and does not require interven-tion into water piping.Specifications:Supply Voltage: 6 - 15VdcSupply Current: 130mAOscillating Frequency of Magnetic Field:

2KHzDimensions: 72 x 50 x 27mmMeans of Field Transmission:

2 cables are coiled up helically aroundthe water pipe (10 windings per coil)

ORDER CODE: GB794

ELECTRONIC UNDERGROUNDRODENT PEST REPELLENT

This waterproof module emits powerful seis-mic oscillations (vibrations) underground.These oscillations are generated at a rapidrate. This module should be buried 10 -30cm deep, preferably close to the animal’s(mole or similar rodent) tunnel. The connect-ing cable between the module and its powersupply should also be buried.Specifications:Supply Voltage: 9Vdc max.Supply Current: 150mAEffected Area: 1000m² max.

ORDER CODE: GB778

CAR ANDMOTORCYCLE

IN / OUT THERMOMETER WITHDUAL DISPLAY, BACKLIGHT AND

BATTERY TESTER

Features:Digital Thermometer -50ºC to +70ºC and

Voltage meter / car battery analyserDual display: in / out temperature or

min. / max. temperature memory or

temperature / voltageExternal waterproof temperature sensorIce alertDigital voltage meter as car battery monitor,

and charging level monitorAnalogue car battery level analyser icon

from empty to fullVoltage guard function: green LED flashes

when battery level is too low or highSpecifications:Power Supply: 1 x 1.5V AAA cell (not incl.)12V car plug is included for LED backlight

ORDER CODE: AB015

MOTORCYCLE INTERCOM

This motorcycle intercom is of excellentquality and light weight. It has the mostadvanced design amongst those in its class.It is used between the motor-cyclist and onepassenger on the same motor cycle. Wiresare used to interconnect all the differentparts of this intercom system.Specifications:Power Supply : 2 x 1.5V AAA-cells (not incl.)Signal-to-Noise Ratio: more than 60 dBOutput Signal Level: 150 mVFrequency Response : 20 - 60000Hz ± 3dBVolume Control and Auxiliary Audio InputInput Circuit: 62dB ± 1dB (< 2.2Kohm unbal-anced)Output Earphone: 32 Ohm / 300mWDimensions of Control Unit:

63x56x25mmDimensions of Earphone + Microphone:

78x55x22mmWeight: 40g

ORDER CODE: FB096

RODENT-DETERRENT FOR THEMOTOR VEHICLE

This module is a powerful ultrasonic sound-generater. Humans do not hear it, butrodents find it very irritating and try to avoidit. In order to scare rodents away from themotor vehicle the module should be mount-ed inside its engine compartment.Specifications:Supply Voltage 12 - 24VdcSupply Current: 500mA max.Dimensions: 72 x 50 x 28mm

(without mounting straps)ORDER CODE: GB757

03.3

VIDEO CAMERAMODULES

MINI CAMERA B/W CCIRWITH MICROPHONE AND IR VISION

9 - 12VDC

A monochrome (black and white) CMOSvideo camera built into a miniature, bracket-ed metallic enclosure. It is ideal for short dis-tance viewing surveillance systems, videophones, industrial machine monitoring andtoys as a very high resolution is not requiredfor these applications. Each camera has 6 IR(Infra Red) LEDs, for night vision, and amicrophone, for audio monitoring, integratedinto its enclosure.Electrical Connectors are supplied for:DC Power Supply Input - 9V ‘PP3’ block bat-tery clip,Composite Video Signal Output - Yellow In-line RCA Phono Socket (female),Audio Sound Signal Output - White In-lineRCA Phono Socket (female),Specifications:Connects directly to standard video monitoror AV inputs of VCRSmall size: 40x34x30mmSupply Voltage: 9 to 12Vdc or 9V batterySupply Current: 40mA max.On-chip auto exposure controlImager: 1/4 inch B/W CMOS sensorPixels: 352(H) x 288(V) CCIRElectronic Shutter: 1/160 to 1/6000 secScanning: 2:1 interlaceResolution: 240 TV linesMin illumination: 0.1 Lux at F1.2Wide Viewing Angle: 92°Video Output: 1Vpp (75 Ohm load)Weight: 67g

ORDER CODE: AA420

INFRA-RED SPOTLIGHT MODULEFOR CCD CAMERAS

With this IR (infra-red) spotlight CCD-cam-eras may recognize objects in completedarkness. Although IR light is invisible to thehuman eye, CCD-cameras can see well withan infrared spotlight.It is perfect for inconspicuous observation of

entrances, drives etc.Supply Voltage: 12 - 15VdcSupply Current: 300 mARange: max. 5mDimensions: 72 x 50 x 18mm

ORDER CODE: GB762

MINI CAMERA COLOUR CCDWITH MICROPHONE 9VDC

A colour CMOS video camera built into aminiature, bracketed metallic enclosure. It isideal for security systems, video phones,industrial machine monitoring and toys.Eachcamera has a microphone, for audio moni-toring, integrated into its enclosure.Electrical Connectors are supplied for:DC Power Supply Input - 9V ‘PP3’ block bat-tery clip,Composite Video Signal Output - Yellow In-line RCA Phono Socket (female),Audio Sound Signal Output - White In-lineRCA Phono Socket (female),Specifications:Connects directly to standard video monitoror AV inputs of VCRSmall size: 40x34x30mmSupply Voltage: 9Vdc or 9V batterySupply Current: 45mA max.On-chip auto exposure controlImager: 1/3 inch colour CCD sensorPixels: 510(H) x 492(V) PALElectronic Shutter: 1/160 to 1/6000 secScanning: 2:1 interlaceResolution: 380 TV linesMin illumination: 5 Lux at F1.4Wide Viewing Angle: 72°Video Output: 1Vpp (75 Ohm load)Weight: 85g

ORDER CODE: AB022

2.43GHZ WIRELESS AUDIO / VIDEOTRANSMITTER / RECEIVER

This is a single channel 2.430GHz wireless(Radio transmission) audo / video transmitterand receiver set. This device can be usedwith all existing audio or video equipmentwith standard RCA connections. The unitoperates on 12Vdc. An 12Vdc adapter issupplied but you can also use an external12V-battery. The transmitter and receiverhave built-in directional antennas. This per-mits wireless transmission of audio andvideo signals over a distance of 100m inopen spaces or 30m indoors.Features:

12Vdc powered (adapters are included)(RCA) Audio/Video connectors andA/C connectionsTransmitter and Receiver both bave built-in,directional antennasApplications:

baby monitorentertainment equipmentsecurity systemswireless audio transmissionsfrom TV to TV, VRC to TV, CCD camerato monitor, or stereo set to another radio

This system works with all of your existingaudio or video componentsSpecifications:Carrier frequency: 2.430 GHzTransmission RF Power: 10mW max.Range: 100m max. open space line of sight

30m max. indoors optimal conditionsVideo Input / Output: max. 1Vpp / 75ohmAudio Input / Output: 0.8V nom. / 600 OhmAudio Bandwidth: 50 - 17000HzAudio / Video Connectors: RCARCA cables 2 x (EB550) (not included)Supply Voltage: 12VdcSupply Current:

Transmitter: 110mAReceiver: 180mA

Dimensions: 150 x 88 x 40mmORDER CODE: AB189

FLAT BLACK / WHITECRT MONITOR

This light and compact black / white monitoruses a CRT (cathode ray tube). It comeswithout an enclosure.Features:low power consumptionclear imagehigh resolutioninternal synchronisationSpecifications:4 inch B/W flat monitorSupply Voltage: 12VdcSupply Current: 460mAPower Consumption: < 6WComposite Video Input: 1Vpp, 75 Ohm4 inch B/W cathode-ray tube:

Operating Voltage: 12VOperating Current: 75mAG2 Voltage: 300VHigh Voltage: 6kVDimensions: 191 x 100 x 30mm

Resolution: 350 TV lines (H)Available Pixels: > 80% (H) / > 80% (V)Brightness: 100cd/m³ max.

04.1

SECURITY

Temperature Range: -10°C to +55°CExternal Dimensions: 204 x 105 x 35mmAccessories: 6-pin and 4-pin cable, manual

ORDER CODE: AB142

B/W VIDEO QUAD SELECTORFOR 4 CAMERA INPUTS

Features:This is a real-time, monochrome, quad videoselector that can be connected to up to 4video cameras like (AA420) and (AB022).It has 2 composite video outputs:1 Quad video signal: combination of 4 inputs

(this signal can be used to view all 4 videoinputs simultaneously on 1 screen)

1 Sequential, every 3 sec., switching signal(the device periodically selects 1 of the 4input signals, 1 at a time; full-screen view)

The gain of each video input can be adjust-ed independently.Specifications:Supply Voltage: 12Vdc ±10%Supply Current: 300mA max.Refresh Rate: 25 frames per secondResolution: 720 x 576 pixels CCIR

380 TV linesMonochrome: 256 grey shadesVideo Inputs: composite video camera signal

4 x inputs 1Vpp 75 Ohm BNC connectionsVideo Outputs: 1 quad and 1 switching

composite video 1Vpp 75 Ohm BNCDimensions: 48 x 218 x 214mmWeight: 1.5kgOptional: (not included)Five Adapters: BNC Plug to RCA Socket

5 x (EB430) for 4 inputs and 1 outputORDER CODE: AB244

FAKESECURITY CAMERAS

FAKE SECURITY CAMERAWITH MOTION

This is a very realistic looking fake securitycamera. It helps prevent and deter suspi-cious activity when placed in a survey arealike shops and at building entrances. Itappears to work like an actual security cam-era. It has a built in motion sensor that acti-vates a red LED and rotates it from side toside (motorised pan movement) at its basethat is connected to a mounting bracket. Nowiring needed. It has a on/off power switch.Mounting screws are included.Specifications:Power Supply: 3 x AA 1.5V cells (not includ-ed).

Detection Range: 5 to 100cmDimensions:

ORDER CODE: GB503

DUMMY SECURITY VIDEO CAMERA

This is a dummy CCTV system camera thatlooks very realistic. It can be used as a thiefand trespasser deterrent. The dummy canalso be used with your existing security sys-tem for additional protection. It is cream-coloured, has a life like lens and flashing redLED to attract attention. A mounting bracketand screws are included.Power Supply: 4 x ’AA’ 1.5V cells (included)Dimensions: 80 x 180mm, 210mm height

ORDER CODE: FB404

HOME AND BUSINESSSECURITY SYSTEMS

IDS805 CONTROL PANEL

The IDS805 Control Panel is a versatile,state of the art, microprocessor based, 8zone alarm panel. It is manufactured to thehighest specification and will provide manyyears of service if it is installed correctly andmaintained. Most features are optional andmay be programmed either directly throughthe keypad or via the telephone system,using the IDS download software and appro-priate modem. The IDS805 consists of anIDS keypad and control panel. The IDS805electronic control panel is built into a metalcabinet that should be mounted indoors. Themetal cabinet has enough space to also takea transformer (code: AA733) (not included)and stand-by battery (not included) (code:RB008). There are 8 programmable burglaryzones, appropriate outputs for siren and aux-iliary power and 5 outputs that may be pro-grammed to perform various trigger/switch-ing functions. It has a built in telephonedialer. For correct operation the IDS805requires a transformer / battery combination,sensors and signaling devices.

ORDER CODE: FB477

IDS816 CONTROL PANEL

The IDS816 Control Panel is a versatile,state of the art, microprocessor based, 8zone alarm panel. It is intended to be usedfor surveying up to 16 burglary zones. Thenumber of zones can be doubled by usingthe zone doubling method that requires twodifferent end-of-line resistors per zone. Therecommended, easier way of doubling thenumber of zones is by connecting one 8zone expander module, (AC010) (not includ-ed), to the IDS816 Control Panel.

It is manufactured to the highest specifica-tion and will provide many years of service ifit is installed correctly and maintained. Mostfeatures are optional and may be pro-grammed either directly through the keypador via the telephone system, using the IDSdownload software and appropriate modem.Together with the 8 programmable burglaryzones there are also a dedicated panic zone,monitored siren output, auxiliary power out-puts and 5 programmable outputs which maybe programmed to perform varioustrigger/switching functions.

The IDS816 electronic control panel is builtinto a metal cabinet that should be mountedindoors. It has a built in telephone dialer. Forcorrect operation the IDS816 requires atransformer / battery combination, keypad,sensors and signaling devices.Required: (not included)The metal cabinet has enough space to alsotake a transformer (AA733) and one12V 7Ah lead acid stand-by battery (RB008)IDS 16 zone digital keypad (AC009)IDS 8 zone expander module (AC010)suitable sensors and signaling devices.

ORDER CODE: AC008

IDS 16 ZONE DIGITAL KEYPAD

This is an electronic keypad that can only beused together with the IDS816 Alarm ControlPanel (AC008). It communicates digitally via2 wires with the IDS816 Control Panel. Italso receives its power from the IDS816Control Panel via another 2 wires. It can beconnected to the IDS816 Control Panel with4 core signal/alarm cable (TB004). Pleasenote that the IDS816 Control Panel will sup-port up to 8 keypads.

04.2

ORDER CODE: AC009

IDS 8 ZONE EXPANDER MODULE

This is an electronic 8 zone expander mod-ule that can only be used together with theIDS816 Alarm Control Panel (AC008). It isused to add another 8 zone connections tothe existing 8 zone connections of theIDS816 Control Panel. It is powered by theIDS816 Control Panel. Please note that theIDS816 Control Panel will support only oneexpander module.

ORDER CODE: AC010

ELECTRONIC CARD SWITCHMODULE

This device optically reads a the coding on acard and switches a relay if the coding iscorrect. It can be used by a selected few toswitch devices, machines, alarm systemsetc. 3 Identical cards are included and theircoding can be changed.Supply Voltage: 9VdcSupply Current: 150mARelay Output: max. 1A / 48V (SPST)

ORDER CODE: GB795

ELECTRONIC KEY MODULE 12VDC

When holding the electronic key tag in frontof the detection module (distance 5 - 15mm), a relay switches on. Application: non-contact door opener to switch appliancesetc. You may hide the detection modulebehind a non-metallic nameplate or a doorglass pane. Ideally only "insiders" knowwhere you have to hold the key tag to openthe door.The key tag does not require any battery!One key tag is supplied with the module.You may buy a spare key tag (GB791).Technical Specifications:Supply Voltage: 12Vdc

Supply Current: 100mA for the module.Key Tag Dimensions: 35 mm diameterModule Dimensions: 75 x 60 x 22mm

ORDER CODE: GB755

SPARE KEY FORELECTRONIC KEY MODULE

No battery is required!Electronic Key Tag Dimensions: 35mm dia.

ORDER CODE: GB791

MULTI-PURPOSESECURITY KEYPAD

This is a self-contained, dual output keypadfor security control applications. It makesuse of microprocessor technology. It hasEEPROM memory that protects the storeddata in case of a power failure. User settingsand entry codes are stored in this memory.There is one master code and two user entrycodes: code1 and code2. Over 100 millioncombinations are possible for the codes.User code 1 can be set to act as a duresscode that activates the duress output. Thisoutput is connected to an alarm system or atelephone dialler. Two separate relay out-puts. Audible key operation. Built-in tamperswitch. A plastic mounting box is supplied foreasy installation onto a flat surface.Specifications:Supply Voltage: 10 - 14VdcSupply Current: 10 - 100mAKeypad: 3 x 4 push-button keysCode Combinations: 111111100 possibilitiesTwo Relay Outputs:

output 1: 5 Amp max.output 2: 1 Amp max. with N.C., N.O. andCOM. dry contacts, 30Vdc max.

Duress Output: NPN transistor with opencollector output that switches to ground (-)when activated, 100mA / 25Vdc max.

Available Codes:User 1 & 2, Super User, Master, Duress and

Accelerated codesDimensions: 117 x 74 x 48mmWeight: ± 230g

ORDER CODE: AB379

MINI-FENCEHIGH-VOLTAGE GENERATOR

This device generates 2kVolt low powerpulses. It is not meant to deter burglars. it isuseful though for keeping small animalsbound or out of a garden with electric-fenc-ing around it.Supply Voltage: 12VdcSupply Current: 300mA max.

ORDER CODE: GB776

CAR / MOTOR CYCLESECURITY SYSTEMS

ULTRASONIC CAR ALARMWITH REMOTE CONTROL 12VDC

The alarm features the following:1) Two Key ring transmitters - each transmit-ter has 1 button (can be coded by user)2) Alarm status:The cars indicators will flash indicating whenthe alarm is turned on or off. If the alarm isturned on and any of the doors are left open,the siren will beep until the door is closed.The alarm system will then arm itself.3) Two point immobilizer:The immobilizer circuit will self arm 18 sec-onds after the vehicles ignition has beenturned off. There are two normally open con-tacts available rated at 20 Amps 12V DC.4) Alarm activation:Ultrasonic movement (ultrasonic sensor isadjustable on the head). Door switches(either positive or negative door switchescan be used). Panic switch (if the transmitterbutton is pressed for longer than 2 secondsthe alarm activates)5) Output for optional door lock control inter-face (FB095).6) Battery backup:A 9V battery can be connected (not sup-plied)

ORDER CODE: TB016

04.3

CAR ALARMWITH REMOTE CONTROL

This compact all-in-one car alarm providesoptimal protection. Four alarm channels (oneoptional). Built-in siren with current sensing.Output for optional door lock control inter-face (FB095). Multifunctional transmitter forremote control. Built-in adjustable shock sen-sor with pre-alarm option. Ignition cutoff andaudible and visual arming/disarming signal.Specifications:Operating Voltage : 8 - 16VdcPower consumption : arm/disarm : 100mA;stand-by :10mA; alarm : 450mABack-up Battery: 9V (EB160) (not included)Relay output (ignition cutoff) : 15A/120VacOperating range : 16 - 40mOptional second transmitter (AB183)Alarm cycle : 30 secondsPassive re-arming timer : 30 secondsSelf-learning code system sequences :118098 codes/alarm group ; 472392 differentcodesOutput sound level : 110dB / 1mImpact sensor : electronic shock sensorVibration : 6G repetitiveAlarm activation delay : 3 secondsTrigger input : minus 0.6Vdc dropGround output : 500mA maxTransmitting frequency : 433.92 MHzFlashing light output: two 5A outputs (fused)Main fuse (red wire) : 5ADimensions : 115x115x75mmWiring harness : 2.5m

ORDER CODE: FB085

REMOTE CAR ALARM (2 WIRE)

This car alarm system is very easy to installand is offered at a competitive price. Built-inshock sensor (with pre-alarm mode) andvoltage drop detector. Auxiliary ground trig-ger input.Please note that this alarm system does nothave any output for central door locking.Specifications:Operating Voltage: 9 - 16VdcPower consumption: stand-by 10mA,

alarm 650mAOperating range: 6 - 40mOptional second transmitter (AB183)Alarm cycle: 60 secondsSelf-learning Code System: 472392 differentcodesOutput sound level: 120dB / 1mImpact sensor: fully electronic piezo shocksensorVibration: 6G repetitiveAlarm activation delay: 3 secondsTrigger input: minus 0.6VDC dropCable length: 1.3mDimensions: 85x85x90mm

ORDER CODE: FB086

SPARE 2 CHANNEL TRANSMITTERFOR REMOTE CAR ALARM

This 2 channel key-ring transmitter is usedwith (FB085) and (FB086)Specifications:2 channelskeychain housingPower Supply: 12V battery (DB247) (incl.)Transmission Frequency: 433MHzDimensions: 50 x 37 x 14mm

ORDER CODE: AB183

IGNITION CUT-OFF SYSTEMWITH KEYPAD

This set consists of an illuminated keyboardand a relay. Can be disarmed with a person-al 4-digit code. Special key for disarming thesystem. The system is armed automatically15 seconds after the engine has been shutdown. Valet function for protection at yourservice station. A red flashing LED indicatesthat the alarm is armed.Specifications:Supply Voltage : 10.5 - 14VdcPower Consumption : Arm/disarm : 8mA;Stand-by : 44mA; Alarm : 140mARelay output : 12V / 20APassive arming timer : 15 secondsDimensions : 55x45x18mm

ORDER CODE: FB087

POWER DOOR LOCK INTERFACE

This central unit drives one or more doorlock motors: code (FB093) and (FB094).Features:Can be activated by an alarm system orremote control receiver, (both not included), using a single input connection. This inputhas to be pulled active low to ground, (con-nected to the negative supply rail), to acti-vate and unlock the door(s).Once the input is disconnected or pulledhigh, (connected to 12V supply rail), the doorlock motor(s) will return to the locked posi-tion again.Please note that when the wires of the doorlock motor are swopped the door will unlockinstead of lock and the other way round.Adjustable pulse cycle to prevent overheat-

ing of the door lock motor(s).Complete with connectionsSpecifications:Supply Voltage : 12VdcDimensions : 100x72x30mm

ORDER CODE: FB095

MOTORFOR CENTRAL DOOR LOCK

This is an actuator motor that can be used ina door locking system. You require 1 perdoor for every door that you wish to auto-matically lock and unlock.Dimensions : 120x60x28mm

ORDER CODE: FB094

MOTOR FOR CENTRALDOOR LOCK WITH SWITCH

This is an actuator motor that can be used ina door locking system. The motor comeswith a built-in switch and wire connections:Normally Closed (locked position) (brown)Normally Open (unlocked position) (white)Common (black)Motor Power (blue and green)Dimensions : 120x60x28mm

ORDER CODE: FB093

CENTRAL DOOR LOCKINGSYSTEM WITH 4 MOTORS

Features:Complete 4-door set that includes:

1 master motor with switch (FB093) foruse in the driver’s door and 3 slave actuator motors 3 x (FB094)1 door lock interfaceadjustable positioning hardware for easyand safe installation

After correct installation:When the driver’s door lock knob is pulledup (unlocked) or pushed down (locked) theother 3 door locks automatically do thesame. The 4 door locks can also be con-trolled by an alarm system or remote controlreceiver, (both not included). This is done by

04.4

using 2 control wires, (25: white and brown),that will toggle the door locks between alocked state and unlocked state. Every timethese wires are reconnected the door lockswill change state.Specifications:Supply Voltage: 12VdcActuator motor Force: push / pull 6kgFits any modelWater-resistant

ORDER CODE: AB071

ULTRASONIC DETECTOR

Detects glass breakage or other movementswithin the car.Features:Separate detectorsAdjustable sensitivityEasy installationLED indicationSpecifications:Voltage Supply : 12VdcWire length : ± 2mDimensions : 73x50x25mm

(detectors : Ø12 x 20mm)ORDER CODE: FB089

MOTOR CYCLE ALARM - REMOTE

This alarm system is equipped with the latestin security electronics. A multifunctionaltransmitter with self-learning code isenclosed. The indicators flash when the sys-tem is armed or disarmed. Ignition lockout isin effect when the alarm is ON. Built-inadjustable shock sensor with pre-alarm,extra protection is possible for the boot andfor accessories. The compact central unit iseasy to install on a dry spot. Specifications:Operating Voltage : 9 - 15VdcPower consumption : arm/disarm : 70mA;stand-by : 6mA; alarm : 40mARelay output (ignition cut-off) : 15A/120VacOperating range : 16 - 40mAlarm cycle : 30 secondsPassive rearming timer : 15 secondsSelf-learning code system : 472392 differentcodesOutput sound level : 110dB / 1mImpact sensor : fully electronic piezo shocksensorVibration : 6G repetitiveAlarm activation delay : 3 secondsTransmitting frequency : 433.92MHzWiring harness : 1.5mOutput indicator lights : 10AMain fuse (red wire) : 3A

Dimensions : 100x60x25mmORDER CODE: FB088

MOTOR CYCLE ALARM MODULE

This device automatically switches on aseries connected horn or siren when themotorbike is moved (tilted) from a parkingposition to any other. It is waterproof andshakeproof. It can also be used to protectany other objects, which should not bemoved.Technical Specifications:Switching Capacity: max. 1A / 40VSupply Voltage: no need of own operatingvoltage as it is just a switching deviceDimensions: 18 x 15 x 12mm(without mounting straps)

ORDER CODE: GB761

SWITCHES AND LOCKS

PANIC PUSH BUTTON

A rectangular white plastic push-button withwith the word ’EMERGENCY’ printed in redonto it. It has three screw terminals: N.O.,N.C. and COM. It may be used to manuallytrigger an alarm system.Dimensions: 23 x 76mm, 15mm height

ORDER CODE: HB015

GATE PUSH BUTTON

A rectangular white plastic push-button witha picture of a gate printed in black onto it. Ithas three screw terminals: N.O., N.C. andCOM. It can be used to open security gatesusing Standard Mortise Strike (PB127).Dimensions: 23 x 76mm, 15mm height

ORDER CODE: GB150

MORTICE LATCH FOR STRIKE

Narrow style latch for aluminum doors withdouble cylinders. It should be used togetherwith the mortice strike, (PB127), where thereis restricted access on both sides of thedoor. It has three identical keys that arerequired for locking and unlocking the doorespecially during a power failure when thereis no power for the mortice strike (not includ-ed). Dimensions: 23 x 130mm, 25mm depth.Length of brass Lock: 54mm

ORDER CODE: PB126

STANDARD MORTICE STRIKE12 VAC

This is a robust general purpose electricstrike suitable for installation in metal andwooden frames. Also used in custom metalhousing for grill gates.Specifications:Power Supply: 12 Vac / 0.5A transformer

PB163, EB913 or at best PB161 (not incl.)Resistance of Electromagnet: 30 OhmDimensions: 25 x 160mm, 30mm depth

ORDER CODE: PB127

SIRENS AND WARNING LIGHTS

MICRO PIEZO SIREN 6-14VDC

A powerful, micro, electronic, piezo siren. Ithas a black, ABS plastic enclosure. It has 2wires and 48.5mm spaced mounting holes.Specifications:Supply Voltage: 6 - 14VdcSupply Current: 170mA at 12VdcOscillating Frequency: 4.5kHzSound Pressure: 115dBA at 1mDimensions: 21 x 40 x 48mm

ORDER CODE: AB421

04.5

ELECTRONIC MINI SIREN6 - 12VDC

A mini electronic alarm siren on a swivelbracket with 22mm spaced mounting holesSupply Current: 140mA at 12VdcFrequency Range: 1.5 - 3.5kHzSound Pressure: 107dBA at 1mDimensions: 39 x 44 x 57mmWeight: 47g

ORDER CODE: EB222

ELECTRONIC PIEZO SIREN 12 VDC

A very piercing two tone siren in a toughivory coloured plastic housing. High soundpressure level using 2 piezo-elements.Connection to the unit is with two colourcoded leads (red +, black -). Two mountinglugs spaced 98mm apart are molded into thecase which allows the unit to be fixed to asurface using M3 size screws.Supply voltage: 6 to 15V DCOperating voltage: 12V DCCurrent usage at 12V DC: 120mASound Pressure: 97dBFrequency Range: 1.5 - 3.1kHzOverall dimensions: 84x54x32mmLeads: Approximately 130mm long

ORDER CODE: PB042

ELECTRONIC SIREN12 VDC 15 WATT

A compact electronic alarm siren, self-con-tained in a black plastic housing with anadjustable swivel mounting.Specifications:Supply Voltage: 6 - 12VdcSupply Current: 1.3A at 12VdcPower Consumption: 15WSound Pressure: 125dBA at 1mType of Sound: periodic yelping soundCase: Black ABS Plastic with metal bracketDimensions: 100mm x 110mm diameter.

ORDER CODE: XB009

ELECTRONIC SIREN 6 TONE20 WATT 12VDC

A compact electronic alarm siren, self-con-tained in a plastic housing with swivelmounting. (Up to 15 Watt sound output -select from 6 different sounds). Features lowcurrent drain.Voltage: 12VDC

ORDER CODE: FB453

OUTDOOR SIREN WITHSTROBE LIGHT 12VDC

A compact electronic alarm siren with redflashing light built into it. The siren and lightare activated simultaneously with a 12Vdctrigger input from an alarm panel or by cut-ting the power or by the hidden tamperswitch. It has a built-in, rechargeable back-up battery with battery recharger. It requiresa permanent DC supply.Specifications:Supply Voltage: 11 - 14VdcSupply Current:

Siren: 200mAStrobe Light: 250mA

Siren Output: 120dBStrobe Intensity: 25 lumenDimensions: 241 x 160 x 51mm

ORDER CODE: AB017

FLASHING LIGHT GREEN LENS12VDC (GLOBE)

Ideally suited for connecting to your homealarm system. Should your alarm be trig-gered, the light will flash and draw extraattention. The light comes in a splash proofhousing and has a built in flasher unit.Specifications:Supply Voltage: 12VdcSupply Current: 0.8ADimensions: 78mm diameter, 45mm height

ORDER CODE: FB403

FLASHING LIGHT RED LENS12VDC (GLOBE)

Ideally suited for connecting to your homealarm system. Should your alarm be trig-gered, the light will flash and draw extraattention. The light comes in a splash proofhousing and has a built in flasher unit.Specifications:Supply Voltage: 12VdcSupply Current: 0.8ADimensions: 78mm diameter, 45mm height

ORDER CODE: FB402

STROBE LIGHT RED LENS 12V(XENON)

This flashing xenon light is ideally suited forconnecting to the output of your home alarmsystem. This light starts to flash when pow-ered by your triggered alarm. The flashing ofthe light draws extra attention and indicateswhere the alarm is being made. The enclo-sure is water proof and has two power leads.Specifications:Supply Voltage: 12VdcSupply Current: 90mADimensions: 70mm diameter, 36mm height

ORDER CODE: SB034

STROBE LIGHT BLUE LENS 12VDC(XENON)

This flashing xenon light is ideally suited forconnecting to the output of your home alarmsystem. This light starts to flash when pow-ered by your triggered alarm. The flashing ofthe light draws extra attention and indicateswhere the alarm is being made. The enclo-sure is water proof and has two power leads.Specifications:Supply Voltage: 12VdcSupply Current: 150mADimensions: 70mm diameter, 46mm heigh

ORDER CODE: GB427

04.6

STROBE LIGHT RED LENS 12 VDC(XENON)


ORDER CODE: QB060

STROBE LIGHT AMBER LENS12VDC (XENON)


ORDER CODE: GB556

SECURITY SENSORS

FLANGED, ROUNDREED SWITCH NC

Recessable, flanged, round, in-line reedswitch with cylindrical permanent magnet.Ideal for flush mounting in door and windowframes.Specifications:Normally Closed Switch Contacts

(when the two parts are in close proximity)Operating Gap Distance: 20mm max.Dimensions:Front Mounting Disc: 19mm dia. x 2mm thickCylindrical Part: 9mm dia. x 32mm lengthMounting Hole Diameter: 9.5mm

ORDER CODE: AB414

DOOR-REED SWITCHAND MAGNET NC

A surface mounting reed switch and magnetin similar white plastic moldings. Contactsare NC (normally closed) when the reedswitch and magnet are in close proximity toeach other. This is the preferred door-reedswitch for security systems. It can be used toactivate an alarm system when a door isopened. Attached to surfaces by either dou-ble-sided tape or screws (not included).Specifications:Operating Gap (for Closed Switch Contacts):

0 to 18mm(between the magnet and reed switch thatare mounted onto non-metallic surfaces)

Reed Switch Contact Rating:max. 500mA / 100V

Dimensions (both parts): 55 x 12 x 13mmFixing centers: 54.5mm using M3 screws

ORDER CODE: MB049

DOOR-REED SWITCHAND MAGNET NO

A surface mounting reed switch and magnetin similar white plastic moldings. Contactsare NO (normally open) when the reedswitch and magnet are in close proximity toeach other. Can be used to activate analarm system when a door is opened.Attached to surface by either double-sidedtape or screws (not included).Specifications:Operating Gap (for open switch contacts):

0 to 18mm(between the magnet and reed switch thatare mounted onto non-metallic surfaces)

Reed Switch Contact Rating:max. 250mA / 30V

Dimensions (both parts): 55 x 12 x 13mmFixing centers: 54.5mm using M3 screws

ORDER CODE: MB163

VIBRATION DETECTOR

This sensor is attached to a window and willdetect any vibrations that are caused by aburglar trying to open or break the window.Dimensions: 55 x 12 x 13mm

ORDER CODE: AA483

ELECTRONIC SHOCK SENSOR

The sensor detects shocks, for example, col-lisions, break-ins, car towage, etc. It can beinstalled anywhere in your vehicle. It hasadjustable sensitivity and LED indication.Supply Voltage: 12VdcDimensions: 73x50x25mm

ORDER CODE: FB090

INFRA-RED LIGHT BARRIERMODULAR 4M

Already assembled IR (infra-red) light barriersystem consisting of separate IR transmitterand receiver units. Range of 4m. When thesingle IR beam, between the two units, isinterrupted, like when a person walksthrough it, a relay switches. The relay outputis in the IR receiver unit and its on-time isadjustable between 0.5 and 7 sec.With this system it is possible to switch acounting device or a bell for the on-time ofthe relay.Specifications:IR Beam Range: 4mSupply Voltage: 12VdcSupply Current: max. 100mA (each unit)Output Relay: max. 3A / 25V (SPST)Transmitter Dimensions: 40 x 25 x 21mm

(with mounting straps)Receiver Dimensions: 91 x 40 x 47mm

(with mounting straps)A tilted IR reflector mirror is recommended ifthe IR beams path should be deviated.

ORDER CODE: GB797

INFRA-RED SINGLE BEAMLIGHT BARRIER 30M

Already constructed IR (infra-red) light barri-er with separate transmitter and receiver.This device can be used to detect the cross-ing or intrusion at a gate or door entrance.The relay in the receiver switches when theIR beam across the entrance is interrupted.Separation range is 30 meters. Equipmenthas an on-indicator LED at the receiver forfunction indication and to assist when align-ing and mounting the transmitter. Technical Specifications:

04.7

Supply Voltage for Transmitter:9Vdc (approx. 60mA)

Supply Voltage for Receiver:12Vdc (100mA max.)

Relay Switch Output at Receiver:1 x change over (SPDT), max. 3A / 24V

Range: 30mRay of light:

Single IR (infra-red) beam that is invisibleto the human eye.

Optics: 2 clear 5mm IR LEDs at transmitter1 clear 16mm dia. lens at receiver

Receiver Dimensions: 72 x 50 x 41mmTransmitter Dimensions: 30 x 25 x 15mmA tilted IR reflector mirror is recommended ifthe IR beams path should be deviated.

ORDER CODE: GB748

INFRA-RED SINGLE BEAM 40M

This infra-red beam security sensor consistsof two units: a transmitter and a receiver.The units should be mounted on the oppo-site sides of an entrance. It can be usedboth indoors and outdoors. The transmittersends a modulated infra-red light beam tothe receiver. The receiver contains a relayswitch. The relay is switched on, (normalstate), only while the receiver detects theinfra-red beam. The relay has three connec-tions: normally open, normally closed andcommon.Specifications:Supply Voltage: 12 - 24VdcSupply Current:

Transmitter: 21mA at 12VReceiver: 43mA at 12V

Maximum Range: 40mRelay Switch Contact Rating: 5A / 220VacDimensions per unit: 57 x 105 x 30mm

ORDER CODE: AA703

SUNWAVE DUAL IR BEAM 30M

This is a security sensor that detects withtwo infra-red light beams. It consists of twounits: a transmitter and a receiver. The unitsshould be mounted on the opposite sides ofan entrance. It can be used both indoors andoutdoors. The system features two mecha-nisms that help to prevent false triggering.The system will only be triggered if:1) both beams are interrupted simultaneous-ly and2) the interruption endures for a certain mini-

mum time duration. This minimum time dura-tion is called the obstruction time. Theobstruction time is adjustable.The receiver contains a voltage monitor jack.Connect any DC volt meter (not included) tothe monitor jack. Use the voltage reading tohelp you align the transmitter and receiver tothe same optical axis.The relay has three connections: normallyopen, normally closed and common. Thetransmitter and receiver each have a mount-ing bracket and built-in tamper switch.Specifications:Supply Voltage: 10.5 - 28VdcSupply Current:


Maximum Range: 30mAdjustable Obstruction Time: 50 - 700 msec.Relay Switch Contact Rating: 0.5A / 30VdcDimensions per unit: 82 x 171 x 77mm

ORDER CODE: AC493

SUNWAVE DUAL IR BEAM 40M

This is a security sensor that detects withtwo infra-red light beams. It consists of twounits: a transmitter and a receiver. The unitsshould be mounted on the opposite sides ofan entrance. It can be used both indoors andoutdoors. The system features two mecha-nisms that help to prevent false triggering.The system will only be triggered if:1) both beams are interrupted simultaneous-ly and2) the interruption endures for a certain mini-mum time duration. This minimum time dura-tion is called the obstruction time. Theobstruction time is adjustable.The receiver contains a voltage monitor jack.Connect any DC volt meter (not included) tothe monitor jack. Use the voltage reading tohelp you align the transmitter and receiver tothe same optical axis.The relay has three connections: normallyopen, normally closed and common. Thetransmitter and receiver each have a mount-ing bracket and built-in tamper switch.Specifications:Supply Voltage: 10.5 - 28VdcSupply Current:


Maximum Range: 40mAdjustable Obstruction Time: 50 - 700 msec.Relay Switch Contact Rating: 0.5A / 30VdcDimensions per unit: 82 x 171 x 77mm

ORDER CODE: AC887

INFRA-RED REFLECTOR MIRROR

This IR (infra-red) reflector may be used withIR light barriers.Dimensions: 51 x 69mm, 8mm thick

ORDER CODE: GB809

PASSIVE INFRA-RED DETECTOR(PARADOX)

The Pro Plus detector has been redesignedwith improved Auto Pulse Signal Processing.Technical Specifications:Sensor Type Dual Element InfraredOperating Temperature -10 C to +50 CPower input 9 to 16Vdc / Vcc 31mA maxCoverage 110 Viewing angle (10.6m x10.6m) at an installation height of (2m to2.7m)Auto Pulse Signal ProcessingAutomatic Temperature CompensationRF Metal Shield

ORDER CODE: PB031

PASSIVE INFRA-RED MOTIONDETECTOR 230VAC WITH

230V / 5A RELAY CONTACTS

Features:This passive infrared detector is suitable forboth indoor and outdoor useDetection: 110° - max. 15mSwitching Capacity: 1000W / 230Vac (relayoutput)Adjustable: sensitivity, detection distanceand switching durationSpecifications:Power Supply: 230Vac / 50HzOutput Voltage: = supply voltage 230VacOutput Power Rating: 1000W / 5AWarm-up Time: about 30 sec.Adjustable Light Sensitivity: for night / daydifferentiation.

04.8

Detection Range: 15 m (at 20°C)Detection Angle: 110°Adjustable Detection Angle: ± 40°Adjustable Timer Duration: 5 to 320 sec.

ORDER CODE: AB019

PIR WALL SWITCH

This passive infrared sensor reacts tochanges in temperature emitted by objectsor persons passing through its detectionarea. This sensor is meant to be connectedin series with a 230Vac incandescent lightbulb inside the home. The light turns onautomatically when the this sensor senses aperson entering into a room. The light turnsoff automatically after the person leaves theroom. The automatic lighting drasticallysaves money on the electricity bill as it turnsthe light on only when it is needed. Theoverride feature allows the wall switch toperform the function of an ordinary lightswitch, as when the light switch is in the ón´position, the light will remain on for as longas the switch is in the ÓN´ position. Ideal forLiving Rooms, Staircases, Entrance Halls,Garages, etc.Feature:-Adjustable preset Auto-Stop time-Built-in Photocell adjusts the time for thesensor to activate-Switch controls on/off with Manual override-Adjustable sensing angle 110 degrees-Detecting distance of 9m at a height 5 - 6mSpecifications:Power Requirements 220V - 240V AC 50HzLighting Load: between 30 and 300 Watts

Please note: only use incandescent LightsFuse Rating 1.6A / 250VDetection Angle 110 degreesDetection Range up to 9m in lengthMounting Height 1 - 1.8m approximatelyPower consumption Standby current 30mAmax, operating current 35mA maxSwitching Function Auto, off and manualoverrideWarming up time About 1 minuteAdjustable Time Delay: 8 sec. to 9 min.Adjustable Light Sensitivity: 0 to 1000LuxManual override Switch is toggled back toÓn´ from Óff´ within 2 seconds

ORDER CODE: FB451

TWILIGHT SWITCHMODULE 12VDC

This device can be used to switch on securi-ty lights during night-time.It is a light-sensi-

tive switching device. Its output relay-switchis switched on when the light shining onto itslight-sensor is brighter than the pre-setvalue. The relay-switch is otherwise switchedoff. Not suitable for outdoor use.Specifications:Supply Voltage: 12VdcOutput Relay: 1 pole 2 way (SPDT), it hasCOM., N.O. and N.C. wire connectionsSwitching Capacity: max. 3A / 40V

ORDER CODE: GB775

DAYLIGHT TIME SWITCHSTANDARD 230VAC 10A

The day/night switch comes complete with arear entry 20mm treaded adapter for easyinstallation onto conduit. A unique snap onmounting bracket for wall/pole mounting isincluded. The switch should be so locatedthat only daylight will influence it (i.e. abovethe lamp being switched). It is suitable foroutdoor useSupply Voltage: 230VACMax. Current: 10Amp

ORDER CODE: EB214

TWILIGHT SWITCHMODULE 230VAC

This electronic twilight switch connects a230Vac lamp automatically by means of aninstalled relay at nightfall and off again atdaybreak. The module may also work theother way round: on at daybreak and off atnightfall. The module has a built in switchingdelay to prevent immediate reaction to shortlightning like headlights of a passing car. It issuitable for outdoor use.Specifications:Supply Voltage: 230VacSupply Current: 40mA max.Output Relay: (SPDT), max. 3A / 230VacSwitching Delay: 15 - 45 sec.Dimensions: 70 x 60 x 22mm (withoutmounting flanges)

ORDER CODE: GB749

REMOTE CONTROLS

SENTRY UNIVERSAL REMOTECONTROL TRANSMITTER

1 CHANNEL

This single channel Sentry Universal keyringtransmitter is used with the Sentry French

Remote Control Receiver (FB483). The codeis set by means of a single 12-way dipswitch.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 20mAOperating Frequency: 403MHzEnclosure dimensions: 14x32x66mm

ORDER CODE: FB478

SENTRY UNIVERSAL REMOTECONTROL TRANSMITTER

3 CHANNELS

This 3-channel Sentry Universal keyringtransmitter is used with the Sentry UniversalRemote Control Receiver and Sentry FrenchRemote Control Receiver (FB483). The codeis set by means of two 6-way dip switches.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 12mAOperating Frequency: 403MHzEnclosure dimensions: 14x32x66mm

ORDER CODE: FB479

SENTRY FRENCH REMOTECONTROL TRANSMITTER

1 CHANNEL

This single channel Sentry French keyringtransmitter is used with the Sentry FrenchRemote Control Receiver (FB483). The codeis set by means of a single 12-way dipswitch.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 10mAOperating Frequency: 403MHzEnclosure dimensions: 14 x 32 x 66mm

ORDER CODE: FB481

SENTRY FRENCH REMOTECONTROL TRANSMITTER

3 CHANNELS

This 3-channel Sentry French keyring trans-mitter is used with the Sentry FrenchRemote Control Receiver (FB483). The codeis set by means of two 6-way dip switches.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 10mAOperating Frequency: 403MHzEnclosure dimensions: 14 x 32 x 66mm

ORDER CODE: FB482

04.9

SENTRY FRENCH REMOTECONTROL RECEIVER 1 CHANNEL

This is the receiver unit that works with theSentry French keyring transmitters: (FB481)and (FB482) and Sentry Universal keyringtransmitters: (FB478) and (FB479) to oper-ate devices over a 10 to 30m distance. Idealto operate electrical gates, doors and alarmsystems. It is programmed to a specificchannel by pressing a single on-board pushbutton. It can be set to latching or non-latch-ing mode using a single on-board jumper. Operating Voltage: 12VDCMaximum Dissipation Current: 45mAOperating Frequency: 403MHzEnclosure dimensions: 29 x 66 x 89mm

ORDER CODE: FB483

2-CHANNEL RANDOM CODERF REMOTE TRANSMITTER

This 2-channel, RF, key holder transmitter isan extra transmitter for the 2-Channel RFRemote Control System (AB319).This transmitter is also available in kit form(AC916). It can also be used with the “2-Channel RF Remote Receiver” kit (AC908).Specifications:Power Supply: 12V (A23) battery (DB247)

(battery is supplied)Two push-button switches, one per channelKey holder housingOperating Frequency: 433MHzGenerates unique 30-bit random codeThe code can easily be changedThere are no jumpers usedThere is a choice between ‘continuous’ or

‘burst’ transmittingDimensions: 63 x 40 x 16mm

ORDER CODE: AB318

2-CHANNEL RFREMOTE CONTROL SYSTEM

This is a 2-channel, random code, RFremote control system.

This receiver is also available in kit form(AC908). It can also be used with the “2-Channel RF Remote Tansmitter” kit (AC916).

One transmitter and one receiver unit is sup-plied. The receiver also works with the 2-Channel Random Code RF RemoteTransmitter (AB318). It is suitable for variouscontrol applications:light control, car alarm, opening the garagedoor, front or back door to your home, etc...

Transmitter Specifications:Power Supply: 12V (A23) battery (DB247)

(not included)Two push-button switches one per channelKey holder housingOperating Frequency: 433MHz32-bit code generatorCodes: over 1.000.000.000 combinationsDimensions: 63 x 40 x 16mmOptional Transmitter: (AB318)

Receiver Specifications:Power Supply: 9 - 12V DC or ACSupply Current: 100mA max.Operating Frequency: 433MHzOpen Field Range: up to 30m max.Can be programmed: up to 31 transmittersEach channel has an unique 32-bit codeThe code memory can be erased for safety

purposesIt is programmed to a specific channel by

pressing a single on-board push-buttonEach output can be set for either pulse or

toggle operationspecial function in pulse mode: press both

transmitter buttons simultaneously toactivate both the output relays

When an output is set for pulse operation itwill also have a turn off timer function

Selectable turn off times per output:0.5, 5, 30 sec. and 1, 5, 15, 30, 60 minutesIt has two SPDT relay outputs, each with

COM, NO and NC: 3A max. contact ratingLED indicators for outputs and functionsDimensions: 82 x 100mm

ORDER CODE: AB319

DYNO REMOTE CONTROLTRANSMITTER

1 CHANNEL 200M

This single channel Dyno keyring transmitteris used with the Multitek Remote ControlReceivers (FB917), (FB918) and (FB919).The code is set by means of a single 9-waydip switch.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 12mAOperating Frequency: 403MHzEnclosure dimensions: 14.5 x 37 x 82.5mmTransmission Range: 200m

ORDER CODE: FB914


2 CHANNELS 200M

This 2-channel Dyno keyring transmitter is

used with the Multitek Remote ControlReceivers (FB917), (FB918) and (FB919).The code is set by means of a single 9-waydip switch.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 18mAEnclosure dimensions: 14.5mm x 37mm x82.5mmOperating Frequency: 403MHzTransmission Range: 200m

ORDER CODE: FB915


3 CHANNELS 200M

This 3-channel Dyno keyring transmitter isused with the Multitek Remote ControlReceivers (FB917), (FB918) and (FB919).The code is set by means of a single 9-waydip switch.Supply Voltage: 12V alkaline battery (23A)(DB247) (battery is included)Maximum Dissipation Current: 18mAEnclosure dimensions: 14.5mm x 37mm x82.5mmOperating Frequency: 403MHzTransmission Range: 200m

ORDER CODE: FB916

MULTITEK REMOTE CONTROLRECEIVER 1 CHANNEL

This is a single channel receiver unit thatworks with the Dyno keyring transmitters(FB914), (FB915) and (FB916) to operatedevices over a maximum distance of 200m.Ideal to operate electrical gates, doors andalarm systems. It is programmed to a specif-ic channel by pressing a single on-boardpush button. It can be set to latching or non-latching mode using a single on-boardjumper.Operating Voltage: 12VDCMaximum Dissipation Current: 50mOperating Frequency: 403MHzEnclosure dimensions: 29mmx87mmx87mm

ORDER CODE: FB917

04.10

MULTITEK REMOTE CONTROLRECEIVER 2 CHANNELS

This is a 2-channel receiver unit that workswith the Dyno keyring transmitters (FB914),(FB915) and (FB916) to operate devicesover a maximum distance of 200m. Ideal tooperate electrical gates, doors and alarmsystems. It is programmed to a specificchannel by pressing a single on-board pushbutton. It can be set to latching or non-latch-ing mode using a single on-board jumper.Operating Voltage: 12VDCMaximum Current per Channel: 50mAOperating Frequency: 403MHzEnclosure dimensions: 29mmx87mmx87mm

ORDER CODE: FB918

MULTITEK REMOTE CONTROLRECEIVER 3 CHANNELS

This is a 3-channel receiver unit that workswith the Dyno keyring transmitters (FB914),(FB915) and (FB916) to operate devicesover a maximum distance of 200m. Ideal tooperate electrical gates, doors and alarmsystems. It is programmed to a specificchannel by pressing a single on-board pushbutton. It can be set to latching or non-latch-ing mode using a single on-board jumper.Operating Voltage: 12VDCMaximum Current per Channel: 50mAOperating Frequency: 403MHzEnclosure dimensions: 29mmx87mmx87mm

ORDER CODE: FB919

SECURITYCOMMUNICATORS

WIRELESS REMOTE CHIME

Features:It is easily installed and no wiring is required.This wireless doorbell may also be used forremote paging or as a panic switch.It has different ring tones: ding, ding-dongand Westminster.A digitally coded signal is used to preventfalse triggering.Specifications:Range: 100m max.Transmission frequency: 433.92MHzAudio Power: 100dBPower Supply:

Transmitter: 1 x 12V A23 battery (DB247)(12V battery is included)Receiver: 3 x 1.5V C cells(not included)

ORDER CODE: AB012

DOOR PHONE

This system consists of an outdoor station,(doorbell, microphone and speaker), andindoor station, (ring-phone, handset andpush button). When a visitor pushes the callbutton on the outdoor station, at the door orgate, the indoor station rings. The ring is agentle electronic chime bell sound. The hostremoves the indoor stations handset andcommunicates with the visitor and then putsit back again. The push button on the phonemay be used if required.Supply Voltage: 6Vdc or 4xAA 1.5V cellsSupply Current: 30mA talking, 150mA RingRange: 300m, 2 core ripcord 5A (not incl.)

ORDER CODE: GB812

INTERPHONE SYSTEM

This intercom system consists of two identi-cal ring-phones with a handset and call but-ton each. When someone removes thehandset or pushes the call button on aphone the other phone will ring. The ringsounds like a telephone. The ringing will stopwhen both handsets are removed. Bothhandsets should be put back when commu-nication is finished.Power Supply: 230VacPower Consumption: 1W (when operating)Range: 300m, 2 core ripcord 3A (not incl.)

ORDER CODE: GB814

04.11

TEST ANDMEASUREMENT

OSCILLOSCOPES

OSCILLOSCOPE PROBE 60MHZ

Specifications (x1 setting):Attenuation Ratio: 1:1Bandwidth: DC - 15MHzSignal Rise Time: 27nsInput Impedance: 1M Ohm (oscilloscope)Input Capacitance: 46pF + oscilloscope

input capacitanceMax. Input Voltage: 600V DC

Specifications: (x10 setting):Attenuation Ratio: 10:1Bandwidth: DC - 60MHzSignal Rise Time: 5.8nsInput Impedance: 10M OhmInput Capacitance: ±18pFMax. Input Voltage: 600V DC

Compensation Range: 10 - 35pFCable Lenght: 1.2m

ORDER CODE: EB310

OSCILLOSCOPE PROBE 250MHZ(HP9250)

Specifications (x1 setting):Bandwidth: DC - 6MHzSignal Rise Time: 58nsInput Impedance: 1M Ohm (oscilloscope)Input Capacitance: 47pF + oscilloscope

input capacitanceAttenuation Ratio: 1:1Max. input Voltage: 600V DC

Specifications (x10 setting):Bandwidth: DC - 250MHzSignal Rise Time: 1.4nsInput Impedance: 10M OhmInput Capacitance: Approx. 14pFAttenuation Ratio: 10:1Max. input Voltage: 600V DC

Compensation Range: 10 - 35pFCable Lenght: 1.2m

ORDER CODE: GB407

PANEL OSCILLOSCOPE

This Velleman Panel Scope is a LCD, panelmountable, single channel oscilloscope. Thisoscilloscope is ideal for monitoring, systemanalyses, educational purposes, systemdemonstrations, sensor testing or even con-necting it to an audio system!Features:panel mounthigh contrast backlight LCDrecorder roll modeeasy to use set-up menumeasurements: rms, dB(rel), dBV, dBmDirect Audio power measurementsx1 and x10 probe calculation6 display modesSpecifications:1-channel oscilloscopepower supply: 9-13Vdc or 6Vac / 300mA10MHz sampling ratefrequency response: 0Hz - 2MHz (± 3dB)input impedance: 1 M Ohm // 30pFBNC-input connectorAC or DC selection for input couplingvertical resolution: 8 bit0.1mVpp sensitivity5mV - 20V/division in 12 steps200ns - 1hour/division time basefull auto set upX and Y position signal scrollingDVM (digital voltmeter) with x10 optionsaudio power calculation (rms and peak)dBm, dBV, DC, rms ... measurementsrecorder function (roll mode)Display: 128x64 pixels LCD white backlightDimensions: 165 x 90mm, depth 35mmOptional: (not included)

oscilloscope probe x1 / x10: EB310adapter 9Vdc / 500mA: GB836

ORDER CODE: AB354

HPS10 HANDHELD SCOPE

The single channel Velleman HPS10Personal-Scope is not a graphical multimeterbut a complete portable oscilloscope at thesize and the cost of a good multimeter. Itshigh input sensitivity - down to 0.1mV/divi-sion - and extended scope functions makethis unit ideal for hobby, service, automotiveand development purposes. Because of itsextreme value for money, the PersonalScopeis well suited for educational use in schoolsand colleges. Suitable for measurements onaudio equipment, mains voltage applications,digital signals, all kind of sensors, signalanalysis in automotive applications, carstereo, etc… Its full auto setup function,makes measuring waveforms very easy.Specifications:1-channel oscilloscope10MHz sampling ratefrequency response: 0Hz - 2MHz (± 3dB)0.1mVpp sensitivity5mV - 20V/division in 12 steps200ns - 1hour/division time base 32 stepsfull auto set uptrigger modes: run, normal, once, roll, slopeX and Y position signal scrollingDVM readout with x10 optionsaudio power calculation (rms and peak)dBm, dBV, DC, rms ... measurementssignal markers for Voltage and Timefrequency readout (through markers)recorder function (roll mode)signal storage (2 memories)LCD: 128x64 pixels / high-contrastup to 20hours on alkaline batteriesit has a built-in battery charging circuitone oscilloscope probe is suppliedpower supply: 5 x 1.5V AA cells of type:

alkaline: 2x AB748 (not included) orNiMH: 5x AA545 (not included) orNiCd: 5x JB039 (not included)

optional: (not included)practical holster: GB838handcase: GB839adapter 9Vdc / 500mA: GB836

ORDER CODE: GB576

05.1

TOOLS

HPS40 HANDHELD SCOPE

The goal with the single channel VellemanHPS40 is to have a user-friendly, feature-packed and genuinely "hand-held" oscillo-scope.Features:low noise, high sensitivity, modest weight, abacklit LCD and a choice between regularbatteries or rechargeable ones. It also offersa selection of 5 different screen layouts.Both novices and professional users willadmire the fast and fully automatic setupfunction, allowing them to perform measure-ments without physically touching the unit!Floating voltage measurements are com-pletely safe thanks to battery-powered oper-ation and the (included) fully insulated meas-uring probe. These features make theHPS40 indispensable to the professionaluser, service centres and even to the hobby-ist.Specifications:1-channel oscilloscope40MHz sampling ratefrequency response: 0Hz - 12MHz (± 3dB)0.1mV input sensitivity5mV - 20V/division in 12 steps50ns - 1hour/division time in 34 stepsfull auto set upadjustable trigger levelX and Y position signal scrollingDVM readoutaudio power calculations (rms and peak)for 2, 4, 8, 16 and 32 ohm loadsdBm, dBV, DC, rms ...measurementsVoltage and Time signal markersfrequency readout (through markers)transient recorder function (roll mode)signal storage (2 memories)high resolution LCD 192x112 pixelsLCD backlightoptical isolated RS232 output for PCHPS40 unit, user manual, one oscilloscopeprobe, RS232 connection lead (to DB9),flexible carry protection holster, handy rigidcarry case and battery charging circuitpower supply: 5 x 1.5V AA cells of type:

alkaline: 2x AB748 (not included) orNiMH: 5x AA545 (not included) orNiCd: 5x JB039 (not included)

optional: (not included)adapter 9Vdc / 500mA: (GB836)

ORDER CODE: GB813

240Ms/s ADVANCEDPERSONAL SCOPE APS230

The Velleman APS230 is an advanced dualchannel, “hand-held” oscilloscope. A powersupply, battery pack, user manual, serialcable, and two insulated 60MHz (x1 / x10)oscilloscope probes are supplied.Specifications:2-Channel OscilloscopeSupply Voltage: 9Vdc (DC regulated)Supply Current: 500mARechargeable Battery: (is supplied)

6V / 1800mAh NiMH battery packBuilt in Fast Charger:

charging current: 400mAMaximum Sample Rate per channel:

240M samples / sec. for periodic signals60M samples / sec. for single shot events

Max. Input Amplifier Frequency Bandwidth:30MHz per channel (except the 1mV and2mV boost range)

Input Impedance: 1M Ohm // 20pFMaximum Input Voltage: 100Vpeak (DC+AC)Input Coupling: DC, AC and GND

(use GND for auto zero referencing)Vertical Resolution: 8 bit ± 1 bit linearityX and Y position shiftStep markers for voltage, time, ...Full auto set-up for volt/div. and time/div.Trigger Modes: Run, Normal, Once and

Roll mode for 10 sec./Div. and slowerAdjustable Trigger: level and select

positive or negative signal slopeDisplay: 128 x 192 pixels, high contrast LCD

with white LED backlightSignal Storage: 256 samples per channel,

but 2047 samples in Roll mode for up to25 hours of recording per screen

Stereo Scope mode for audio measurementDirect Audio power measurementsdBm Measurement (0dBm = 0.775V):

-80 to +40dB (60dB max. with x10 probe)± 0.5dB accuracy

dBV Measurement (0dBV = 1V):-78 to +38dB (58dB max. with x10 probe)± 0.5dB accuracy

True-rms Measurement:0.03mV to 80V (400Vrms max. x10 probe)2.5% accuracy

Peak Measurements:min., max. and peak to peak

Other Measurements:dB(rel) and dBG

Timebase Range:25nsec. to 1 hour / Division in 35 steps

Input Sensitivity Range:1mV to 20V/Div. in 14 steps (x1 probe)10mV to 200V/Div. in 14 steps (x10 probe)

Probe Calibration Output: 1.2 kHz / 3VppComputer Interface:

internal optical isolation57600 bps Baud rate, RS232 for screenand data transfer

Protection: IEC1010, 600V CATIIDimensions: 230 x 150 x 50mmWeight: 850g (battery weight is included)Optional: soft carrying case (GB577)

ORDER CODE: AB315

CARRYING BAG FOR PORTABLEHPS-SERIES OSCILLOSCOPES

A practical leather and clear plastic holster.ORDER CODE: GB838

CARRYING CASE FOR PORTABLEHPS-SERIES OSCILLOSCOPES

A sturdy blow moulded carrying case.ORDER CODE: GB839

PCS100 DIGITAL STORAGEOSCILLOSCOPE FOR PC

The Velleman PCS100 is a single channeldigital storage oscilloscope, using a comput-er and its monitor to display waveforms. Allstandard oscilloscope functions are availablein the Windows program supplied. Its opera-tion is just like a normal oscilloscope.Connection is through the computer's paral-lel port, the scope is completely optically iso-lated from the computer port.Features and General Information:frequency response: 0Hz - 12MHz (± 3dB)single channelinput impedance: 1Mohm // 30pFmarkers for voltage, time and frequencyvertical resolution: 8 bitauto setup functionoptically isolated from computerrecord and display of screens and datasupply voltage: 9 - 10Vdc / 500mAdimensions: 230 x 165 x 45mmweight: 400gincludes:

PCS100 unit, 1 oscilloscope probe,PC parallel cable, user manual andCD with software

minimum system requirements:IBM compatible PC, Windows 95, 98,ME, (Win2000 or NT possible),XP software can be down loaded fromthe Internet: http://www.velleman.beclick on Support, Downloads select the file:PC-Lab2000 v1_36.zip or later,SVGA display card (min. 800x600),

05.2

mouse, CD-Rom playerfree printer port LPT1, LPT2 or LPT3

Specifications:oscilloscope:1-channel oscilloscopetimebase: 0.1µs - 100ms per divisiontrigger source: Channel 1 or free runningtrigger level: adjustable per ½ divisioninput sensitivity: 10mV - 3V / divisionrecord length: 4096 samplessampling frequency: 800Hz - 32MHz

(Real time)true RMS readout (only AC component)transient recorder:timescale: 20ms - 2000s / divisionmax. record time: 9.4hour / screenautomatic storage of dataautomatic recording for more than 1 yearmarkers for time and amplitudezoom functionspectrum analyser:frequency range: 0 .. 400Hz - 16MHzlinear or logarithmic timescalezoom functionoptional: (not included)

soft carrying case: GB577adapter 9Vdc / 850mA: AB006PLEASE NOTE: GB835 INCLUDES THE

ADAPTERORDER CODE: GB823

PCS500 DIGITAL STORAGEOSCILLOSCOPE FOR PC

The Velleman PCS500 is a dual channel dig-ital storage oscilloscope that uses a comput-er and its monitor to display waveforms. Allstandard oscilloscope functions are availableusing the supplied Windows program. Itsoperation is identical to that of normal oscil-loscope apart from the fact that all opera-tions can be performed with the mouse.Connection is made through the computer'sparallel port and the scope is completelyoptically isolated from the computer port.The oscilloscope and transient recorder havetwo completely separated channels with asampling frequency up to 1GHz. Any wave-form displayed on the screen can be storedfor later use in documents or for the compar-ison of waveforms.Features and General Information:frequency response: DC - 50MHz (± 3dB)inputs: 2 channels1 external trigger inputinput impedance 1Mohm // 30pFmax. input voltage 100V (AC + DC)input coupling: DC, AC and GNDoptically isolated from computersupply voltage: 9 - 10Vdcsupply current: 1000mAincludes:

PCS500 unit, 2 oscilloscope probes,PC parallel cable, user manual andCD with software

minimum system requirements:

IBM compatible PC, Windows 95, 98, ME(Win2000 or NT possible),XP software can be down loaded fromthe Internet: http://www.velleman.beclick on Support, Downloads select the file:PC-Lab2000 v1_36.zip or later,SVGA display card (min. 800x600),mouse, CD-ROM and free printer port

Specifications:Oscilloscope:2-channel oscilloscopetimebase 20ns - 100ms / divisiontrigger sources: CH1, CH2, EXT or free

runningtrigger on rising or falling edgetrigger level is adjustable over whole

screenstep interpolation linear or smoothedmarkers for voltage and frequencyinput sensitivity 5mV - 15V / divisionauto setup-functionpre-trigger functiontrue RMS readout (only AC component)recording length 4096 samples / channelsampling frequency:, 1.25kHz - 50MHz

(real-time) and 1GHz (repetitive)Spectrum analyser:frequency range 0...1.2kHz - 25MHzlinear or logarithmic time scaleoperating principle FFT (Fast Fourier

Transform)FFT resolution 2048 linesFFT input channel: CH1 or CH2zoom functionmarkers for amplitude and frequencyTransient recorder:time scale 20ms - 2000s / divisionmax. recording time: 9.4hours / screenautomatic data storage and recording

for more than 1 yearsampling rate: 1 sample / 20sec. - 100s / smarkers for time and amplitudezoom functionrecording and display of screensdata format: ASCIIoptional: (not included)soft carrying case: GB577adapter 9Vdc / 1000mA (AC672)

PLEASE NOTE: GB834 INCLUDES THEADAPTER

ORDER CODE: EB850

SOFT CARRYING CASE /GENERAL INSTRUMENT BAG

Cyan coloured material bag with a zip-fastener. Dimensions: 240 x 180 x 50mm.

ORDER CODE: GB577

SIGNAL GENERATORS

PC FUNCTION GENERATOR0 - 1MHZ

Features:The Velleman PCG10 has afrequency range: from 0.01Hz to 1MHzcrystal-based stabilityoptically isolated from the PClow sine wave distortionTTL-level synchronisation outputstores up to 32K of waveform pointsyou can create your own waveforms with

the integrated signal wave editorfunction generator screen with signal

preview predefined library waveforms are included:

noise, sweep, ...standard waveforms: sine, square, triangleextended bode plot possibility, used with

Velleman PC oscilloscopescan be chained with Velleman PC

oscilloscopes to the same PC printer port(LPT1, 2 or 3)

includes:PCG10 unit, PC parallel cable,user manual, CD with PCLab2000software: Windows™ integrated softwarefor the function generator and VellemanPC oscilloscopes

minimum system requirements:IBM compatible PC, Windows 95, 98, ME(Win2000 or NT possible),XP software can be down loaded fromthe Internet: http://www.velleman.beclick on Support, Downloads select the file:PC-Lab2000 v1_36.zip or later,SVGA display card (min. 800x600),mouse, CD-ROM,and free printer port LPT1, LPT2 or LPT3

Specifications:maximum sample rate: 32M samples / sec.direct digital wave synthesis (DDS)32K wave tabledistance control via RS232frequency setting resolution: 0.01%amplitude range: 100mVpp to 10Vpp @

600 Ohm loadamplitude resolution: 0.4% of full scaleoffset: from 0 to -5V or 0 to +5V max.

(resolution 0.4% of full scale)vertical resolution: 8 bits (0.4% of full scale)typical sine wave distortion (THD): < 0.08%output impedance: 50 Ohmdimensions: 235 x 165 x 47mmsupply voltage: 12Vdcsupply current: 800mAoptional: (not included)soft carrying case: GB577signal connecting cablesadapter 12Vdc / 800mA

PLEASE NOTE: GB840 INCLUDES THEADAPTER

ORDER CODE: GB648

05.3

MULTIMETERS

TEST LEADS

4mm Multimeter Test Leads with protectioncaps. 1kV /15A max.(IEC1010 CLASS 2 protection)

ORDER CODE: QB076

INSULATED TEST PROBEWITH STAINLESS STEEL TIP

Test probe with plastic insulatingsleeve. The thin stainless steeltip penetrates insulation andoxide layers. It has a built-in4mm Ø brass banana socket.Voltage Rating: 60VdcVolume Resistance: 50mOhm

AC827 BlackAC828 Red

ANALOGUE MULTIMETER

Ideal for beginners.Features:Mirror scale for accurate readingDC and AC voltage measurements: up to1000VDC current: 50µA to 250mAresistance measurementstwo transistor tests: Iceo-test and hFE-meas-urementsdiode test: reverse and forward currentmeasurementswith dB-scaleSpecifications:DC Voltage:100m/500m/2.5/10/50/250/1000V

Basic Accuracy: 3% at FSDInput Impedance: 20kOhm/Vmax. Input Voltage: 1000V

AC Voltage: 10/50/250/1000VBasic Accuracy: 4% at FSDInput Impedance: 9kOhm/Vmax. Input: 1000V

DC Current: 50µ/2.5m/25m/0.25ABasic Accuracy: 3% at FSDOverload Protection: 1.5A

Resistance: x1/x10/x100/x1k/x10k OhmBasic Accuracy: 3% at FSDOverload Protection: 1.5A

Transistor Test: hFE 0-1000 (with extra con-nector) / IceoDiode Test: yes, forward and reverse current

Display: analogueRanging mode: manualDimensions: 148 x 100 x 35mmWeight (with battery): ± 280gPower Supply: 9V batteryAccessories: manual, test leads and battery

ORDER CODE: RB004

DIGITAL MULTIMETER 3 ½ DIGIT

Features:voltage measurements: AC 600V max. and

DC 600V max.current measurements: max. 10Aresistance measurements: 2M Ohm max.automatic polarity functionlow-battery indicationtransistor and diode testSpecifications:DC Voltage: 200m/2/20/200/600V

Basic Accuracy: ±0.5%Input Impedance: 1M Ohmmax. Input Voltage: 600V

AC voltage: 200/600VBasic Accuracy: ±1.2%Input Impedance: 450k OhmFrequency Range: 45 to 450Hzmax. Input Voltage: 750Vac

DC Current: 200µ/2m/20m/200m/10ABasic Accuracy: ±1.0% for 200µ/2m/20mA±1.2% for 200mA range±3.0% for 10A rangeOverload Protection:0.2A is fused / 10A is not fused

Resistance: 200/2k/20k/200k/2M OhmBasic Accuracy: ±0.8%±1.0% for 2M rangeOverload Protection: 220V

Over Range: shows “1”Transistor Test: base current 10µA/Vce 2.5VDiode Test: 0.7mA forward test currentLow-Battery indication: shows “BAT”max. Display: 1999LCD Display Size: 46 x 15mmRanging Mode: manual selection knobDimensions: 70 x 126 x 26mmWeight (with battery): ± 170gPower Supply: 9V batteryAccessories: manual, test leads and battery

ORDER CODE: PB279

DIGITAL MULTIMETER WITHTEMPERATURE METER MTD10

The MTD10 is a compact pocket size 3 ½digit multimeter for measuring DC and ACVoltage, DC Current, Resistance and Diode.This meter provides Temperature, Transistormeasurements and an audible continuity testfunction. Full range overload protection andlow battery voltage indication is provided.Specifications:DC Voltage: 200m/2/20/200/1000VAC Voltage: 200V / 750VDC Current: 2000µ/20m/200m/10AResistance: 200/2k/20k/200k/2M OhmTemperature: -20ºC to 1370ºCTransistor Test: NPN or PNP transistorsContinuity Test: Buzzer sounds if measured

connection resistance is less than 20 OhmTypical Accuracy:DC voltage: ±0.5 % rdg + 2 dgtAC voltage: ±1.2 % rdg + 1 dgtDC Current: ±1.2 % rdg + 2 dgtResistance: ±0.8 % rdg + 2 dgtTemperature: ±3 % rdg + 2 dgtTemperature Resolution: 1ºCAccessories: Holster, Battery, Test Leads,Temperature Probe and Instruction ManualWeight: 220gPower Source: 9V Battery

ORDER CODE: GB519

3 ¾ DIGIT DIGITAL MULTIMETER

This is a professional, 3 ¾ Digit, LCD,digital multimeter.Polarity, low-battery indication andbargraph annunciatorsOverload protectionauto/manual rangingData-hold functionTransistor, diode and continuity testCapacitance measurements: up to 32.6µFFrequency measurements: up to 150kHzHolster is includedSpecifications:DC Voltage: 326m/3.26/32.6/326/1000V

Basic Accuracy: ±0.3%Input Impedance: 10M Ohm

05.4

max. Input Voltage: 1000VAC voltage: 3.26/32.6/326/750V

Basic Accuracy: ±0.8%Input Impedance: 10M OhmFrequency Range: 40 to 1000Hzmax. Input Voltage: 750Vac

DC Current: 326µ/3260µ/32.6m/326m/10ABasic Accuracy: ±1.2% (±2% 10A range)Overload Protection: 0.5A and 10A fused

AC Current: 3.26m/32.6m/326m/10ABasic Accuracy: ±0.5% (±2% 10A range)Overload Protection: 0.5A and 10A fused

Resistance:326/3.26k/32.6k/326k/3.26M/32M OhmBasic Accuracy: ±0.8% (±1.2% for 32.6Mrange)Overload Protection: 250V

Capacitance: 326n/32.6µFBasic Accuracy: ±3.0%

Frequency Measurement: 32kHz/150kHzBasic Accuracy: ±1.2%Overload Protection: 250V

Over Range: yes “OL”Continuity Buzzer: yesTransistor Test: yes 10µA /3.4VDiode Test: yes 0.4mALow-Battery indication: yesmax. Display: 3999 + bargraphLCD Display Size: 31 x 61mmRanging Mode: auto/manualData hold: yesDimensions: 91 x 189 x 31.5mmWeight (with battery): ± 310gPower Supply: 9V batteryAccessories: Manual, Test Leads, Holsterand 9V Battery

ORDER CODE: PB007

4½ DIGIT TRUE RMSDIGITAL MULTIMETER

This is a professional, True RMS. 4 ¾ Digit,LCD, digital multimeter.Polarity, low-battery indication and10 different functions and 32 rangesOverload protectionData-hold functionAuto Power-offTransistor, diode and continuity testCapacitance measurements: up to 20µFFrequency measurements: up to 20kHzHolster is includedSpecifications:DC Voltage: 200m/2/20/200 /1000V

Basic Accuracy: ±0.1%Input Impedance: 10M Ohmmax. Input Voltage: 1000V

AC voltage: 2/20/200/750VBasic Accuracy: ±0.6%Input Impedance: 2M OhmFrequency Range: 40-1000Hzmax. Input Voltage: 700V

DC Current: 2m/20m/200m/10ABasic Accuracy: ±0.5% (±2.0% for 10A

range)AC Current: 2m/20m/200m/10A

Basic Accuracy: ±0.5% (±2.0% for 10Arange)Overload Protection: 10A

Resistance:200/2k/20k/200k/2M/20M/200M OhmBasic Accuracy: ±0.3% (±5.0% for 200Mrange)Overload Protection: 250V

Capacitance: 2000p/20n/200n/2µ/20µFBasic Accuracy: ±4.0%

Frequency: 20kHzBasic Accuracy: ±1.5%Overload Protection: 250V

Over Range: yes “1”Continuity Buzzer: yesTransistor Test: yes 10µA / 3.2VDiode Test : yesLow-Battery indication: yesmax. Display: 9999LCD Display size: 30 x 61mmRanging mode : manualData Hold: yesAuto Power-Off: yesDimensions: 189 x 91 x 31.5mmWeight (with battery): 310gPower Supply: 9V batteryAccessories: Manual, Test Leads, Holster,Capacitance Connector and 9V Battery

ORDER CODE: RB007

3 ¾ DIGIT, BACKLIT,DIGITAL MULTIMETER WITH RS-232 OUTPUT

This is a professional, 3 ¾ Digit + 38-seg-ment bargraph, LCD, digital multimeter.Polarity, low-battery indication and backlightAuto/manual rangingOverload protectionData-hold functionTemperature measurementTransistor, diode and continuity testCapacitance measurementsRS232C standard interface to connect PCSpecifications:DC Voltage: 4/40/400/1000V

Basic Accuracy: ±0.5% (±0.8% for 1000Vrange)Input Impedance: 10M Ohmmax. Input Voltage: 1000V

AC Voltage: 4/40/400/750VBasic Accuracy: ±1.2% (±1.5% for 750Vrange)Input Impedance: 10M OhmFrequency Range: 40-400Hzmax. Input Voltage: 750V

DC Current: 4m/400m/10ABasic Accuracy: ±1.2% (±2.0% for 10Arange)Overload Protection: 15A/250V-fuse(for 10A-range)

AC Current: 4m/400m/10ABasic Accuracy: ±1.5% (±3.0% for 10Arange)Overload Protection: 15A/250V-fuse(for 10A-range)

Resistance: 400/4k/40k/400k/4M/40M OhmBasic Accuracy: ±1.2% (±3.0% for 40Mrange)Overload Protection: 250Vdc or 250Vrms

Capacitance: 4n/400nFBasic Accuracy: ±4.0%

Temperature: 0° to 400°C / 400°C to 750°CBasic Accuracy: ±3.0%

Over Range: yes “OL”Continuity Buzzer: yesTransistor Test: yesDiode Test: yesLow-Battery indication: yesmax. Display: 3 ¾ Digit + 38 seg. BargraphRanging Mode: Auto / ManualData Hold: yesBacklight: yesDimensions: 78 x 186 x 35mmWeight (with battery): ±300gPower Supply: 9V batteryAccessories: user manual, test leads,holster, 9V battery, RS-232C cable,software and K-type thermocouple

ORDER CODE: GB670

DIGITAL CLAMP METER

This is a low-cost digital clamp meter. Highcurrent / voltage measurements are takenwithout cutting or making direct electric con-tact with live wires.Features:3 ½ Digit LCD display withautomatic polarity indicationdata-hold functionAC current measurements: max. 1000A ·insulation test: max. 2000MOhm · volt-age measurements:

AC (max. 750V) andDC (max. 1000V)

resistance measurements: max. 20Kohma carrying bag is includedSpecifications:DC voltage: 1000V max.:

basic accuracy: ±0.8%input impedance: >9Mohm

AC voltage: 750V max.:basic accuracy: ±1.0%input impedance: >9Mohm

AC current: 200/1000A:basic accuracy: ±2.0%overload protection: 1200A for 60 seconds·resistance: 200/20k:basic accuracy: ±1.0%(insulation test : 20M/2000M)(±2.0% for insulation test)overload protection: 500Voverrange: yes "1"continuity buzzer: yeslow-battery indication: yes "BAT"ranging mode: manualdata hold: yes

05.5

Dimensions: 230 x 37 x 90mmWeight (with battery): ±320gPower Supply: 9V batteryAccessories: manual / test leads / battery /

carrying bagORDER CODE: AB157

DIGITAL CAPACITANCE METERUP TO 20MF

This digital capacitance meter can test awide range of capacitor values. It can meas-ure capacitors from 0.1pF up to 20,000µF.The zero adjustment knob enables one totake accurate measurements. Direct insertjacks are used for easy measurement and aset of external test clips are also supplied.Specifications:Power Supply: 9V battery (is supplied)3 ½-Digit LCD display withBattery-Low Indication9 Capacitance Measuring Ranges:

200pF, 2nF, 20nF, 200nF, 2µF, 20µF,200µF, 2mF and 20mF

Accuracy:200pF - 200µF range: ±0.5% of full scale2mF range: ±1.0% of full scale20mF range: ±2.0% of full scale

Capacitor Testing Frequencies:800Hz: from 200pF up to 2µF range80Hz: 20µF range8Hz: 200µF range and larger

External Zero Adjust: ±20pFDimensions: 31.5 x 91 x 189mmWeight: 240g (battery weight is included)Accessories:

Manual, Test Clips, Holster and 9V BatteryORDER CODE: AA694

3 ½ DIGIT LC METER

This digital LC meter can test a wide rangeof inductor, ‘L’, and capacitor, ‘C’, values. Itmeasures inductor values from 100µH to 2H

and capacitor values from 1pF to 200µF.Direct insert jacks are used for easy meas-urement and a set of external test clips arealso supplied.Specifications:Power Supply: 9V battery (is supplied)3 ½-Digit LCD display withBattery-Low Indication4 Inductance Measuring Ranges:

2mH, 20mH, 200mH, 2HAccuracy:2mH - 200mH range: ±2%2H range: ±5%

Note: This meter is not recommended formeasuring inductor values below 100µH.6 Capacitance Measuring Ranges:

2nF, 20nF, 200nF, 2µF, 20µF, 200µFAccuracy: ±4.0%

Dimensions: 189 x 91 x 31.5mmWeight: 300g (battery weight is included)Accessories:

Manual, Test Clips, Holster and 9V BatteryORDER CODE: AC862

PANEL MOUNT DISPLAYS

3 ½ DIGIT, LOW COST,DIGITAL PANEL METER 9VDC

Specifications:3 ½ digit LCD displaySupply Voltage: 9VdcSupply Current: 1mAdcPlease Note: the 9V-supply ground, (0V),

should not be connected to the negative,input (VIN-).

Sampling Rate: 2 - 3 samples per secondMaximum Input Voltage (only DC voltages):

200mVdc full-scale factory set,but by changing some resistors it can beset for full-scale display:20Vdc, require 9.9M and 100k Ohm or200Vdc, require 9.99M and 10k Ohm or500Vdc, require 9.999M and 1k Ohm(only use ½W, ½% metal film resistors)

High Input Impedance: 100M OhmGuaranteed zero reading for 0V inputAccuracy: ±0.5%Automatic Polarity IndicationDecimal Point Selection: with wire jumperCharacter Height: 13mmDimensions:

Visible LCD: 20 x 46mmOuter Edges: 44 x 68mmPanel Hole: 38 x 54.5mm

ORDER CODE: GB701MANUFACTURER CODE: PM-438T

ANALOGUE, MOVING COIL,DC VOLTAGE PANEL METERS

GB699 15V DC, 47 x 60mmGB700 15V DC, 60 x 70mmEB807 30V DC, 47 x 60mmEB360 30V DC, 60 x 70mm

ANALOGUE, MOVING COIL,DC CURRENT PANEL METERS

AB404 50µA DC, 47 x 60mmGB698 100µA DC, 60 x 70mmAD069 1mA DC, 47 x 60mmAB405 50mA DC, 60 x 70mmGB661 100mA DC, 60 x 70mmAC955 500mA DC, 60 x 70mmAC888 1A DC, 60 x 70mmEB436 5A DC, 47 x 60mmEB806 5A DC, 60 x 70mmFB725 15A DC, 60 x 70mm

DIGITAL THERMOMETER

Features:Easy panel mountingLarge and clear displayHigh-grade ABS casingSpecifications:3 digit LCD displaySupply Voltage: 1 x 1.5V button cell (GB718)

(1.5V cell is included)Temperature Measuring Range:

-50°C to 70°CAccuracy: 1°CCable Length of Temperature Sensor: 1.5mDimensions:

Display: 12 x 6.5mmPanel: 47 x 26mm, 13mm height

ORDER CODE: AB502

05.6

TESTING DEVICES

LOGIC PROBELP-2800

Input impedance: 1M OhmWidth of minimum pulse: 30 nsMaximum input frequency: 17 MHzMeasurable Logic Gate: TTL and CMOSLogic 1 (red LED lights) and then buzzes.2.3V approx. 0.2V 70% VccLogic O (green LED lights) and then buzzes.0.8V approx. 0.2V 30% VccInput overvoltage protectionPulse (yellow LED) flashing time: 500 ms

ORDER CODE: AA713

LOGIC PULSER LP-540H

The logic pulser is a very effective tool forinspecting and repairing logic circuits.Specifications:Sync input impedance: 1M OhmPulse repetition rate: 0.5pps/400ppsPulse width in pulser output at 100m: 10usOutput current1 pulser mode: 100mA sink/source2 square wave output: 5mA sink/sourceMaximum allowable supply voltage: 20VOperating supply voltage range: 3 - 15V

ORDER CODE: AA714

LAN TESTERFOR RJ45, RJ12, RJ11, RJ10 & BNC

This LAN (local area network) tester can beused for testing different cable types. It isindispensable during the installation andmaintenance of computer network and tele-phone cables.Features:LEDs are used for test indicationIt is user friendly and makes testing easyTest cables from a remote location and

in places that are not easily accessibleAll the different tests are automatically doneBNC adapter is supplied for BNC cable tests

Carrying bag is suppliedSpecifications:Power Supply: 9V-battery (not included)Tests for Cable Types:

RJ45, 10 Base-T, Token Ring, RJ11, RJ12and BNC coaxial cable

Cable Fault Tests:continuity, open-circuit, short-circuit andcrossed wire pairs

ORDER CODE: AD247

LED TESTER MODULE

This LED (light emitting diode) tester may beused to determine the functionality, bright-ness, colour and polarity of various types ofLEDs. The LEDs may also be tested usingthe following DC currents:1mA, 2.5mA, 5mA, 10mA, 20mA and 50mA.A LEDs 2 leads are easily inserted into thechosen test-current contacts even when cov-ered with residual solder. The brightness ofany two LEDs may be compared by usingthe two 10mA test sockets that are set sideby side.Specifications:Supply Voltage: 9V batteryLED-Connection: test-contact socketsLED-Testing Currents: 1mA, 2.5mA, 5mA,10mA, 20mA and 50mA DCDimensions: 58 x 44 x 27 mm

ORDER CODE: GB766

INFRA-RED DETECTING MODULE

This "Infra-red Detector" module contains anIR (infra-red) sensor to detect IR-radiation.Itmay be used to determine if an IR remotecontrol unit is functional by testing for its IR-radiation when pressing any button on theunit.It can also be used, in the same way, to testIR-light barriers etc. The module lights up aLED while detecting IR-radiation. It is suit-able for testing most remote controls and IR-transmitters. An indispensable test instru-ment for radio and TV workshops.Specifications:Supply Voltage: 9VdcSensitivity: reacts on almost every IR-

remote controlDisplay: indication with built-in LEDDimensions: 30 x 40 x 17 mm

ORDER CODE: GB792

DIGITAL ALCOHOLBREATHALYSER

This digital breathalyser provides a goodindication of the blood alcohol level using adigital LC display. It also produces a beepingsound if you are legally intoxicated (0.5%blood alcohol concentration). Please notethat although this device provides a goodindication of the blood alcohol level, it is notprecise and should not be used irresponsi-bly. There is no substitute for responsiblealcohol consumption and you should neverdrink and drive!Specifications:Display: LC display with backlightRange of Reading: 0.2 - 1.2% BACAlert Threshold Level: 0.5% BACPower Supply: 3 x 1.5V AAA cells (not

included)Auto Power Off: 2 minutesBreath Sampling Time: > 5 seconds of

continuous breathingRecycle Time: ± 30 seconds (between

measurements)Dimensions: 105 x 45 x 24mm (pocket-

size)Weight: 50g (without batteries)Accessories: 3 blowing tubes

ORDER CODE: FB119

SPARE BREATHALYSER TUBESFive spare tubes for the digital alcoholbreathalyser (FB119).

ORDER CODE: AB503

METAL DETECTORSA Metal detector detects metalobjects that are buried in dryground better than in wetground. Objects are harder todetect in dens ground than inloose sea sand. The type ofmetal also plays a role in thedetection.Larger objects are easier to findthan smaller ones. For example:The metal detector (FB114) canfind a coin with a diameter of25mm at the depth of 100mm.Although most items are found ata depth of less than 300mm, analuminium pot was found at adepth of 500mm.

05.7

METAL DETECTOR TYPE 100

Hunt for coins, relics, jewelry, gold and silverjust about anywhere. The detector has abuilt-in speaker, 3.5mm headphone output,VU-meter, waterproof search coil and anadjustable stem.Specifications:Power Supply : 6 x size AA 1.5V cellsSupply Current: 60mA max.Detection Range: 150mm max.Dimensions:

Search Coil: 165mm diameterAdjustable Stem: 390 - 690mmControl Unit: 101 x 122 x 235mm

Weight: 895gORDER CODE: FB114

METAL DETECTOR TYPE 150

Features:Hunt for coins, relics, jewellery, gold and sil-ver.3-Tone Audio DiscriminatorBuilt-in Speaker3.5mm Headphone OutputVU-MeterWaterproof Search Head (20cm diameter)Adjustable StemSpecifications:Power Supply : 3 x 9V-battery (not included)Weight: 1.483kg

ORDER CODE: AB147

METAL DETECTOR C.SCOPE

Features:Hunt for coins, relics, jewellery, gold and sil-ver.Ideal for startersHeadphones output socketWaterproofed ISOCON Search Head with

25cm diameterEasy to assembleUser-friendly with only two button controls

Specifications:power supply: 2 x 9V-batteries (not included)weight: 0.85kg

ORDER CODE: AB290

TOOLS

ANTI-STATICPROTECTION

ANTI-STATIC WRIST STRAP

Adjustable, blue, PVC anti-static wrist strapwith crocodile clip for connection to agrounded point. Grounding coil cord withembedded 1mega Ohm resistor for safetyprotection.

ORDER CODE: QB077

IC HANDLING

ANTI-STATIC IC EXTRACTOR

Ideally suited for the electronic hobbyist. Theextractor is suitable handling and removingICs. Size: 105mm

ORDER CODE: AA433

DIP IC EXTRACTOR

This IC (integrated circuit) extractor is idealfor removing DIP (dual in-line) ICs from IC-sockets and solderless breadboards. It isideal for those who do circuit prototyping onsolderless breadboards.

ORDER CODE: AA711

PLCC IC EXTRACTOR

The extractor is suitable for removing 18-pin to 124-pin PLCC IC’s.

ORDER CODE: AA712

IC STRAIGHTENER FOR 0.3 AND 0.6INCH DIP IC’S

This tool is ideally suited when you wish tostraighten the pins of IC’s that have to fit abreadboard. The tool can also be groundedto protect your IC against static.

ORDER CODE: PB298

ASSISTING TOOLS

HELPING HAND PCB STAND

This is a very useful pair of adjustable croco-dile clips and magnifying (2.5 Dioptre)device. Size: 125 x 55 x 195mm

ORDER CODE: EB934

QUICK RATCHETING BAR CLAMP

This is a light weight, easy to use bar clamp.You only need to use one hand to operatethis clamp. A ratchet is used for tighteningthe clamp and maintaining clamping pres-sure. The clamp is operated by repeatedlypressurising and releasing the lever on thehandle. The two jaws of the clamp can eitherbe clamped towards each other or spreadaway from each other to exert an outwardpressure. Press the button above the handleto release the grip of the ratchet.Specifications:Maximum Jaw Opening: 100mm

05.8

Jaw Material: nylon fibre filled compositeORDER CODE: AC860

60mm GRIPPING TOOL 8pcs

This light weight, easy to use gripping tool issupplied in a pack of 8 pieces.Specifications:Maximum Jaw Opening: 38mmLength: 60mm

ORDER CODE: AC861

127mm GRIPPING TOOL 30pcs

This light weight, easy to use gripping tool issupplied in a screw-top, plastic container of30 pieces.Specifications:Maximum Jaw Opening: 30mmLength: 127mm

ORDER CODE: AC859

COMPUTER MONITOR SHELF

This device is used to save desk-top space.It is placed on top of a computer monitor toform a shelf. Dimensions : 43 x 46 cm.

ORDER CODE: GB381

MINI-TORCH 3V

A strong mini torch of aluminium alloy. Thetorch is 145mm longth, 28mm diameter.Spare lamp is (GB697).Supply voltage: 3V (2 x AA 1.5V cells)

ORDER CODE: FB046

LAMP WITH MAGNIFYING GLASS

This magnifying lamp is designed as an aidfor all kinds of precision work that requires agood field of visibility. A three-dioptre lens(1.75 magnification) is encircled by a 22Wfluorescent tube. A well-balanced, universallyjointed arm for maximum adjustment. A baseclamp is used to mount the device on theedge of a table top.Specifications:Colour: blackDimensions:

Arm length: 105cmLamp Holder Diameter: 24cm

Spare circular lamp: (AB227)ORDER CODE: AB173

SPARE CIRCULARFLUORESCENT TUBE 22W

A circular fluorecent tube rated 22Watt forthe Lamp with Magnifying Glass (AB173)

ORDER CODE: AB227

POCKET TOOL WITH LED LIGHTAND POUCH

Features:A stainless steel Pocket Tool with LED lightthe lifetime of the LED light: 100 000 hourswater-resistantTools: flat nose pliers, woodsaw, smallblade, small screwdriver and bottle openerbattery life: 12 hours (alkaline)a nylon belt pouch is includedSpecifications:Power supply: 3 x 1.5V AG3 button cellsbulb type: white LED 5mm diameterDimensions: 72 x 32 x 15mm

ORDER CODE: GB651

TWEEZERS

SET OF 4 TWEEZERSSTAINLESS STEEL

This is a set of four antimagnetic, stainlesssteel tweezers that consists of the following:1 x bent nose, 1 x flat spade, 1 x self-closingand 1 x normal

ORDER CODE: AB399

SET OF 4 TWEEZERSNON-CONDUCTIVE

This is a set of four non-conductive plastictweezers.

ORDER CODE: AB400

3-PRONGED GRIPPING TOOL

This is a pencil shaped gripping tool withthree retractable hooking wires at the frontend and a releasing knob at the back end. Itis ideal for removing small objects from outof difficult to reach spaces like a hole.Size: 115mm

ORDER CODE: AD016

PLIERS AND CUTTERS

FB488 Precision flush cutting side cutter130mm long

QB041 Electronic Diagonal Side Cutter120mm Long

05.9

EB256 Side Cutter 120mm Long

AD102 Universal, Heavy-Duty Cutter165mm Long

EB258 Bent Nose Plier 120mm Long

EB257 Long Nose Plier 120mm Long

QB006 Electronic Long Nose Pliers140mm Long

SB008 Plastic Retractable Utility Knifewith snap off blades

AB401 12 Spare Blades in container forRetractable Utility Knife (SB008)

HEAVY-DUTY KNIFE SET 51 PCS

This knife set is ideal for doing model workwith soft materials like balsa wood, thin cardboard, paper, etc...Contains:5 aluminium blade holders with 5 blades31 spare blades2 prickers with 2 pricker needles4 pricker needles1 tube of super glue1 whetstone

ORDER CODE: AB329

WIRE STRIPPERS

ADJUSTABLE WIRE STRIPPER

This is an adjustable wire cutter / stripper. Ithas a brass adjusting screw that is used toset the required cutting depth for differentwire thicknesses. It is chrome-plated.Strips Wires from 0.2 to 3mm diameter

ORDER CODE: AB396

AUTOMATICALLY ADJUSTABLEWIRE STRIPPER

This is an automatically adjusting wire cutteror stripper. It strips wires with diameters:

1, 1.6, 2, 2.6 and 3mmORDER CODE: AB397

CRIMPING TOOLS

CRIMP ON TOOLFOR RJ-TYPE PLUG (4P4C)

This is a RJ9 / RJ10 crimping tool. It is usedfor crimping telephone handset connectors.

ORDER CODE: AB162

RJ11 CRIMP ON TOOLFOR RJ11 PLUGS

A 6 contact RJ11 (AA969) and RJ12(GB720) modular telephone plug crimpingtool that cuts, crimps and strips.Closed lock. All steel construction.

ORDER CODE: EB880

RJ45 CRIMP ON TOOLFOR RJ45 PLUGS

A 8 contact RJ45 (AA520) modular UTP-cable plug crimping tool that cuts, crimpsand strips.Closed lock. All steel construction.

ORDER CODE: AA607

COAX CRIMPING TOOLRATCHET TYPE

This is a crimping tool with ratchet. It can beused for crimping BNC, TNC, N, and F-con-nectors onto coaxial cable.Specifications:RG-type cables: 59, 62, 140, 210BELDEN 8279, 55, 58, 141, 142, 223, 303,400, FIBREOPTICSize: 220mm

ORDER CODE: AB398

CRIMPING TOOL FORCRIMPING CONNECTORS

RATCHET TYPE

This is a crimping tool with ratchet. It can beused for crimping red, blue and yellow insu-lated crimping connectors onto wire.Specifications:Crimping Wire Sizes:Wire AWG: 22 - 18, 16 - 14, 12 - 10Wire Size: 0.5 - 1, 1.5 - 2.5, 4 - 6 mm²Size: 220mm

ORDER CODE: AC737

05.10

SCREWDRIVERS

3 PIECE SCREWDRIVER SET(2 X SLOTHEAD, 1 X CROSSHEAD)

These screwdrivers are ideal for all electron-ic industry use. They have nickel-chromemolybdenum steel blades with special hard-ened tips. This precision screwdriver setconsists of the following:Two Slothead Tip Screwdrivers:

2.4mm width x 75mm length3.0mm width x 100mm length

One Cross-head Tip Screwdriver:Philips No. 0 x 75mm length

ORDER CODE: SB033

6 PIECE ELECTRONICSSCREWDRIVER SET

This screwdriver set is ideal for electronicsapplications: for fixing computers, TV sets,communication instruments, radios, cam-eras, glasses, clocks, watches and otherkinds of precision devices. Each has a blackoxidised screwdriver tip and swivel-headedcap.This precision screwdriver set consists of:Three Slothead Tip Screwdrivers:

2.4mm width x 75mm length3.0mm width x 100mm length4.0mm width x 150mm length

Three Cross-head Tip Screwdrivers:Philips No. 00 x 75mm lengthPhilips No. 0 x 100mm lengthPhilips No. 1 x 150mm length

ORDER CODE: AB207

6 PIECE ELECTRONICSSCREWDRIVER TORX SET

This TORX screwdriver set is ideal for: TVsets, communication instruments, opticalinstruments, cameras, computers, VCRs,telephones, etc. It is used for driving TORXscrews that have 6-pointed, star shaped cav-ities.This precision screwdriver set consists of:TORX sizes:

T6, T7, T8, T9, T10 and T15 x 50mmScrewdriver Size: 130mm

ORDER CODE: AB538

2 PIECE CERAMIC ADJUSTER SET

This is a 2 piece ceramic adjuster set. It isideal for adjusting trimmer capacitors thatare electrically active in a powered circuit. Itis made of materials that will not interferewith the electromagnetic fields in an electriccircuit.Specifications:This ceramic adjuster set consists of:Two Protective Caps: one for each adjusterOne Slothead Tip Ceramic Adjuster:

1.8mm width (flat 1.8)One Cross-head Tip Ceramic Adjuster:

Philips No. 0 (PH0)Ceramic Adjuster Size: 100mm

ORDER CODE: AD017

TOOL KITS

HOBBY TOOL KIT

This value for money tool kit is ideally suitedfor the electronic hobbyist. The kit containsall necessary tools a hobbyist may require ina handy carry case:6 piece precision screwdrivers (phillips #0,phillips #1, slotted 1.4, slotted 2.0, slotted2.4, slotted 3.0).Stainless tweezers4inch Long nose pliers4inch Side cutter10 piece bits pack (5mm, 6mm, #1, #2, no.1,no.2, T-10, T-15, T-20, socket adaptor)HandleExtension bar.

ORDER CODE: AA274

TOOL SET 11 PCS

The home electrician will find this toolsetvery useful.Contents:Flat Screwdrivers: 4 x 100mm, 3 x 75mm,

5.5 x 125mm, 6.5 x 150mmCross Screwdrivers: PH0 x 75mm,

PH1 x 100mm, PH2 x 100mmVoltage Tester + Neon Indicator: 230 - 250VHeavy-duty Pliers: 160mmHeavy-duty Long Nose Pliers: 160mmHeavy-duty Universal Cutter: 150mm

ORDER CODE: AB328

SCREW DRIVER BIT SET 100 PCS

This is a screwdriver bit set that contains100 pieces.Contents:cross bits: PH.0, PH.1, PH.2 (5x), PH.3pozzi bits: PZ.0, PZ.1, PZ.2 (5x), PZ.3square bits: S0, S1, S2, S3flat bits: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mmantenna remover bits: 4, 6, 8, 10torx bits: T8, T10, T15, T20, T25, T27, T30,

T40, T45tri-wing bits: 6, 8, 10torx with centre bits: T8, T10, T15, T20, T25,

T27, T30, T35, T40four-wing bits: 1, 2, 3, 4metric hex bits: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6,

8mmclutch bits: 1, 2, 3fractional hex bits: 1/16, 5/64, 3/32, 7/64,

1/8, 9/64, 5/32, 3/16, 7/32, 1/4dodecagonal torx bits: M5, M6, M8metric hex with centre bits: 2, 2.5, 3, 4, 5,

6mmfractional hex with centre bits: 5/32, 9/64,

1/8, 7/64, 3/32, 5/641 wing nut driver4 extension bits:

socket bit holder: 1 piecemagnetic bit holder: 1 piece

1/4" sq. x 1/4" x 2" extension: 1 piece1/4" sq. x 1/4" x 1" extension: 1 piece

ORDER CODE: AB327

CELLULAR PHONE TOOL SET

This screwdriver tool set is ideal for the cel-lular phone repairer. The set contains:U-shaped, curved, needle tip, cross, flat, 3 x torx and 2 antenna removers withcoloured swivel caps.

ORDER CODE: AB149

COMPUTER SERVICINGTOOL KIT SY-805

05.11

The tool kit comes complete in a black zip-per vinyl case and includes the following:IC Inserter (14 - 16, 24 - 28 Pin ICs)IC ExtractorAntistatic wrist strapSolder SuckerSolder ReelSoldering Iron 25W3 pcs soldering aid toolsHeat SinkLong nose pliers with cutting edgeSide CutterDimensions: 190 x 290 x 50mm

ORDER CODE: AB337

COMPUTER SERVICINGTOOL KIT SY-815

The tool kit comes complete in a black zip-per vinyl case and includes the following:3 pcs Flat Screwdrivers3 pcs Phillips ScrewdriversReversible T10/T15 Torque Driver2 pcs Nut DriversIC Inserter (14 - 16 Pin ICs)IC ExtractorSolder SuckerSolder ReelSoldering Iron 25W3 pcs Soldering Aid ToolsHeat SinkSpare Parts TubeTweezersReverse Action Tweezers3 Claw Parts Retriever / ExtractorLong nose pliers with cutting edgeAdjustable WrenchWire CutterDimensions: 220 x 330 x 50mm

ORDER CODE: AA715

PCB DRILLING TOOLS

DRILL 12 - 18V, MAINS ADAPTORAND DRILL STAND

This is a complete starter drill set for detailedwork. This set includes:Drill with speed control (AA188),Mains Adapter for drill:

(220Vac input with 12V output at 1.0A),Drill Stand,Flexible Shaft with triple ball bearings,A plastic case and 34 bits are supplied,6 hardened Steel Collets that can fit ontoboth the drill and the flexible shaft.

ORDER CODE: AA189

DRILL WITH SPEED CONTROL240VAC

This drill is ideal for the electronic hobbyist’suse. Useable on any workable material. Ithas precision ball bearings to minimize axialand radial play. The rotational speed isadjustable from 5 000 to 20 000 rpm. Thefull wave electronic speed control nearlymaintains constant torque, even at lowerspeeds. The keyless chuck accepts drill bitshaft diameters of 0.5 to 3.2mm.The 20mm drill collar fits drill stand (AA190).A platic case and 40 bits are supplied.Power consumption 100W at 220 - 240VacClass 2 electrical insulationLength: 185mm, Mass approx. 450g.

ORDER CODE: AB709

DRILL WITH SPEED CONTROL12-18VDC

This drill is ideal for the electronic hobbyist’suse. Useable on any workable material. The12 - 18Vdc power supply allows the safe useof coolant. It has precision ball bearings tominimize axial and radial play. The thyristorelectronic speed control is enabled onlywhen used with Mains Adapter (GB194) andis then adjustable from 5 000 to 20 000 rpm.Six hardened steel collets are included: shaftdiameters: 1.0, 1.5, 2.0, 2.4, 3.0, and 3.2mmThe 20mm drill collar fits drill stand (AA190).Power consumption 40W at 12 - 18V max.Length: 220mm, Mass approx. 230g.

ORDER CODE: AA188

MAINS ADAPTERFOR DRILLING MACHINE

This mains adapter is specially made forDrilling Machine (AA188). This adapterenables the speed adjusting function of thedrill. It has automatic overload cut-out with-out uncontrolled restart of the drill. A LEDindicates the working condition. Holes areprovided for storing bits as well as a fold-away tool rest. Input voltage 220-240VAC.Output 12V at 2A operation and 16V opencircuit.

ORDER CODE: GB194

STEEL COLLETSFOR DRILLING MACHINE

A set of 6 triple slit, hardened steel collets

05.12

and a steel collet clamping jaw. These partsfit drilling machines (AB709) and (AA188).Collets for drill bit shaft diameters of 0.8-1.0,1.2-1.5, 1.8-2.0, 2.2-2.4, 2.8-3.0 and 3.0-3.2mm.

ORDER CODE: GB195

KEYLESS CHUCK

Keyless, 3 jaw chuck that can be used withdrilling machines (AB709) and (AA188).It accepts drill bit shaft diameters of 0.5 to3.2mm.

ORDER CODE: AA396

DRILL STAND 220 X 120MMMACHINED BASE

The drill stand features the following:Rigid chromed steel column diameter 20mm,length 280mm.Stable boom yields 140mm throat (column totool center) and 30mm travel.Chrome operating lever and strong returnspring.Machine milled guides and fittings.Thumb screw for easy height adjustmentand drill locking as well as depth stop.Holds drilling machines like (AA188) with20mm or 34mm drill clamp.Drill clamping section maneuverable 90degrees to either side.Two G-clamps included for fastening down,but holes for fixing base to workshop arealso provided.

ORDER CODE: AA190

DRILL BITS

HIGH SPEED STEEL

This is a high speed steel drill set that con-tains 7 pieces. One of each of the following:0.5, 0.8, 1.0, 1.2, 1.5, 2.0 and 3.0mm dia.

ORDER CODE: AB714

HIGH SPEED STEELAD063 a single 0.6mm drill bitAD064 a packet that contains 10 pieces of

0.6mm drill bits

AA403 a single 0.8mm drill bitAD002 a packet that contains 10 pieces of

0.8mm drill bits

AA404 a single 1.0mm drill bitAD003 a packet that contains 10 pieces of

1.0mm drill bits

AD065 a single 1.2mm drill bitAD066 a packet that contains 10 pieces of

1.2mm drill bits

AD067 a single 1.3mm drill bitAD068 a packet that contains 10 pieces of

1.3mm drill bits

TUNGSTEN VANADIUM

Note: shaft diameter is 2.4mm

AA397 0.5mm set of 3 pcsAA398 0.8mm set of 3 pcsAA399 1.0mm set of 3 pcsAA400 1.2mm set of 3 pcsAA401 1.6mm set of 3 pcs

DIAMOND MICRO DRILLS 2pcs

This is a diamond micro drill set that con-tains 2 pieces. Each bit is covered with natu-ral diamond dust for drilling holes into pre-cious stones, pearls etc. Used for drilling0.8mm and 1.2mm diameter holes. Shaftdiameter is 2.35mm.

ORDER CODE: AB699

MILLING BITS

Note: Tungsten Vanadium millingbits with the head and shaftmade out of a single metal piece.It is used on soft / hard woods,plastics and plaster of paris.

CYLINDRICAL CUTTERS 2pcs

This is a set of two pieces. Ideal for millingrectangular grooves. Used to make 3mmwide grooves. Shaft diameter is 3mm.

ORDER CODE: AB704

CONE SHAPED CUTTERS 2pcs

This is a set of two pieces. Ideal for profilingwork. The cone is 6mm diameter at itswidest and 4mm at the tip. Shaft diameter is2.35mm.

ORDER CODE: AB713

SET OF PRECISION CUTTERS 5pcs

This is a set of five pieces. Ideal for profilingwork. The set consists of the following bits:Cone shape: 2.3mm diameterGear shape: 3.1mm diameterCylindrical shape: 2.3mm diameterArrow Tip shape: 2.3mm diameterBall shape: 2.3mm diameterShaft diameter is 2.35mm.

ORDER CODE: AB701

CUTTING DISCS

Note: These discs are used forcutting wood, plastics and non-ferrous metals.

CUTTING DISCS 10pcs

This set consists of ten Corundum cuttingdiscs and one mounting shaft.Dimensions:Disc: 22mm diameter, 0.7mm thicknessShaft: 2.35mm diameter, 40mm length

05.13

ORDER CODE: AB712

CUTTING DISCS 50PCS

This set consists of fifty spare Corundumcutting discs that can be used with (AB712).Please note: Mounting shaft is not included.Dimensions:Disc: 22mm diameter, 0.7mm thickness

ORDER CODE: AB698

METAL CUTTING BLADES 3pcs

This set consists of three flexible, springsteel cutting discs and one mounting shaft.Dimensions:Disk thickness: 0.1mmSmall Disc: 16mm diameterMedium Disc: 19mm diameterLarge Disc: 22mm diameterShaft: 2.35mm diameter, 40mm length

ORDER CODE: AB707

DIAMOND CUTTING DISC

This diamond cutting disc is used for cuttingvery hard materials like steel, porcelain,fibreglass and non-ferrous metals.Dimensions:Disc: 20mm diameter, 0.6mm thicknessShaft: 2.35mm diameter, 40mm length

ORDER CODE: AB706

GRINDING BITS

Note: These Carborundum bitsare used for grinding work onhard materials.

ALUMINIUM OXIDE GRINDING BITS4pcs

This set consists of four mounted aluminiumoxide grinding bits. Various shapes for thewidest range of applications. The set con-sists of the following bits:Ball shape: 5mm diameterGear shape: 6mm diameterCylindrical shape: 2.5mm diameterCone shape: 7mm diameterShaft diameter is 2.35mm.ORDER CODE: AB705

ORBITAL GRINDING DISCS 10pcs

This set consists of ten Carborundum orbitalgrinding discs and one mounting shaft.Dimensions:Disc: 22mm diameter, 3mm thicknessShaft: 2.35mm diameter, 40mm length

ORDER CODE: AB710

SURFACE FINISHING BITS

Note: These bits are used forsanding, cleaning or polishing ofsurfaces.

SAND PAPER FLAP WHEEL

This flap wheel is used for sanding concavecurves and inaccessible spots. This flapwheel is elastic and takes on the shape ofthe workpiece. Sand paper grit is 120.Dimensions:Abrasive part: 20mm diameter, 10mm heightShaft: 3mm diameter, 39mm length

ORDER CODE: AB700

FLEXIBLE SILICON CARBIDEPOLISHING BITS 6pcs

This is a set of six pieces. It is made of aflexible plastic compound that contains sili-con carbide particles. Ideal for smoothingand polishing non-ferrous metals, glass,porcelain, wood and plastics. The set con-sists of the following pieces:1 x Cone shape:

5mm diameter, 15mm height2 x Discs with flattened edge:

22mm diameter, 3.8mm thickness2 x Discs with 90° edges:

22mm diameter, 3mm thickness1 x Shaft: 2.35mm diameter, 40mm length

ORDER CODE: AB711

BRASS WIRE CONE BRUSH 2pcs

This is a set of two pieces. These brass wirecone brushes are ideal for working on alloys,copper, precious metals, semi-preciousstones, plastic and wood. Acid proof. Goodconductor of electricity. Electrically neutral.Suitable for working electronic components.Dimensions:Brush: 8mm diameter, 11mm lengthShaft: 2.35mm diameter, 25mm length

ORDER CODE: AB708

BRASS WIRE WHEEL BRUSHES5pcs

This set consists of five brass wire wheelbrushes and one mounting shaft. Thesebrushes are ideal for working on alloys, cop-per, precious metals, semi-precious stones,plastic and wood. Acid proof. Good conduc-tor of electricity. Electrically neutral and suit-able for working with electronic components.Dimensions:Brush: 22mm diameter, 2mm thicknessShaft: 2.35mm diameter, 40mm length

ORDER CODE: AB702

05.14

SET OF FELT POLISHERS 3pcs

This is a set of three pieces. Ideal for polish-ing softer metals like brass, gold and silver.The set consists of the following bits:Cylindrical shape: 7mm dia., 15mm heightCone shape: 8mm diameter, 15mm heightDisc shape: 16mm diameter, 4mm thicknessShaft: 2.35mm diameter, 30mm lengthORDER CODE: AB703

SOLDERING IRONS

SOLDERING SET4 PARTS

This soldering set is especially suitable forsoldering electronic components onto PCBs(printed circuit boards). It consists of the fourmain parts that are used for soldering work.This set consists of the following four parts:

one 25 Watt soldering ironone desoldering pumpone soldering iron standsolder wire that is contained in a dispenser

ORDER CODE: AD193

LAB-1 THREE-IN-ONE LAB UNIT

The LAB-1, three-in-one unit, is an econom-ic, space saving solution for the electronicslaboratory and home! It is a perfect solutionfor starters and schools.It consists of the following three parts:

one multimeter,one power supply andone soldering iron

Specifications:Power Supply: 230Vac and one 9V batteryPower Consumption: 70 Watt max.Mains Power Cable and manual is supplied

Multimeter Specifications:This is a digital multimeter with:3 ½ digit, 7 segment, backlit LCDPower Supply: 9V Battery (included)Automatic polarity indicationDC Voltage: 200m/2/20/200/600VAC Voltage: 200V and 600VDC Current: 200µ/2m/20mA/200m/10AResistance: 200/2k/20k/200k/2M OhmContinuity Test: Buzzer sounds if measured

connection resistance is less than 60 OhmTransistor Test: NPN or PNP transistorsDiode TestData-hold functionContinuity BuzzerLow battery Voltage IndicatorInput Overload ProtectedInput Connections: IEC1010

three 4mm banana socketsOvervoltage between the terminals and earthground: CAT I 600V and CAT II 300VTesting Leads are also supplied

Power Supply Specifications:This is a regulated DC power supply with:Supply Voltage: 230VacSelectable DC Regulated Output Voltages:

3 / 4.5 / 6 / 7.5 / 9 / 12VdcLow Ripple VoltageMaximum Output Current: 1.5A (2A peak)LED Output Overload IndicatorLED power indicationOutput on/off SwitchOutput Power Terminals:

two 4mm banana sockets for ‘+’ and ‘-’

Soldering Station Specifications:This is an adjustable, temperatue-controlledsoldering station with:Supply Voltage: 230VacSoldering Iron uses a Low Voltage: 24V

completely isolated from the 230V mainsCeramic Heating Element Power: 48W max.built-in heating element temperature sensorAdjustable Temperature Range:

either switched OFF or ON: 150 - 450°CSuitable for lead-free solderingBuilt-in soldering iron stand and sponge traya sponge and spare bit is also supplied

ORDER CODE: AD054

PORTABLE,VARIABLE TEMPERATURE,

GAS SOLDERING IRON

The Portasol Technic is an economical,portable, pocket sized soldering iron. Its tem-perature can be varied up to 400°C. Its heatoutput is equivalent to a 10 - 60 Watt solder-ing iron. It is powered by standard butanecigarette lighter fuel. The continuous operat-ing time per refill is dependent on the tem-perature setting and is typically 1 hour. Aprotective cap prevents gas flow when it isput on the soldering iron and it is fitted with aflint ignitor. The 2.4mm replacement tip,(AB249), incorporates a catalytic converterfor flame-free soldering. Tips are available in5 widths.

ORDER CODE: FB826

SOLDERING STATION WITHCERAMIC HEATER 48W / 230VAC

The GB662 temperature controlled solderingstation incorporates a sophisticated tempera-ture regulating circuit that enables the userto adjust the tip temperature between 150°Cand 420°C. Complete electronic switchingprotects voltage and current sensitive com-ponents against transient spikes The solder-ing iron is heated with a ceramic heating ele-ment that operates on 24V. A separate sol-dering iron stand is included.Dimensions: 160 x 120 x 95mm (without thestand and soldering iron)Optional:Replaceable tips: (AB198) and (AB199)Replaceable Soldering Iron: (AC573)

ORDER CODE: GB662

05.15

SPARE SOLDERING IRONFOR (GB662)

This is a replacement soldering iron for thesoldering stations GB662.

ORDER CODE: AC573

PROFESSIONAL SOLDERINGSTATION 48W / 230VAC

This is a professional temperature controlledsoldering station incorporates a sophisticatedtemperature regulating circuit using a tem-perature sensor. It also has a digital temper-ature display. The tip temperature isadjustable between 160°C and 480°C.Complete electronic switching protects volt-age and current sensitive componentsagainst transient spikes The soldering ironis heated with a ceramic heating elementthat operates on 24V. A mountable solderingiron stand is included. A spare soldering iron,(EB840), and tips are available.Weight: 2.1kgDimensions: 170 x 120 x 90mm (without thestand and soldering iron)

ORDER CODE: AB222

SPARE SOLDERING IRONFOR (EB403) AND (AB222)

This is a replacement soldering iron for thesoldering stations AB222 and EB403.

ORDER CODE: EB840

TEMPERATURE CONTROLLEDSOLDERING STATION 48W/230VAC

The EB403 temperature controlled solderingstation incorporates a sophisticated tempera-ture regulating circuit using a temperaturesensor. The tip temperature is adjustablebetween 150°C and 420°C. Complete elec-tronic switching protects voltage and currentsensitive components against transientspikes The soldering iron is heated with aceramic heating element that operates on24V. A mountable soldering iron stand isincluded. A spare soldering iron, (EB840),and tips are available.Dimensions: 170 x 120 x 90mm (without thestand and soldering iron)

ORDER CODE: EB403

TEMPERATURE CONTROLLEDSOLDERING STATION 50 W / 230V

1. Adjustable between 175°C and 480°C.2. Fine steel tip.3. Replaceable tip (AA363).4. Externally mounted ground output.5. Integrated soldering iron stand.6. Ideal for general purpose and electronic

use.7. Handle has firm comfortable grip.8. 50 Watt 220/240V.

ORDER CODE: SB022

SOLDERING IRON 30 WATT 230V

1. Fine steel tip.2. Replaceable tip.3. Ideal for general purpose and electronicuse.4. Handle has firm comfortable grip.5. 30 Watt 220/240V

ORDER CODE: TB001

SOLDERING IRON 30 WATT 230VAC

This is a mains-powered soldering iron.witha ceramic heating element.Specifications:Supply Voltage: 230VacPower Rating: 30WattReplaceable tip: (AD195)

ORDER CODE: AD194

ELECTRIC SOLDERING GUNWITH FAST HEATING ELEMENT

30 - 130W / 230VAC

This is a gun shaped electric soldering iron.It has a dual-power ceramic heating ele-ment. The switch can be set to “Lo” for nor-mal soldering work on electronic circuits. Setthe switch to “Hi” for fast heating or for sol-dering work that requires more heat thanusual.Specifications:Supply Voltage: 230VacCeramic Heater with dual-power Rating:

30 Watt with switch in “Lo”-position130 Watt with switch in “Hi”-position

Replaceable tip: (AD195)ORDER CODE: AD242

SOLDERING IRONREPLACEMENT TIPS

AB992 Replacement tip for FB8261.0mm

AB249 Replacement tip for FB8262.4mm

AB198 Replacement tip for GB6620.5mm

AB199 Replacement tip for GB6621.0mm

05.16

GB677 Replacement tip for EB4030.8mm

AB351 Replacement tip for EB4032.0mm

FB081 Replacement tip for EB840/AB2220.4mm



GB654 Replacement tip for EB840/AB2223.2mm

AA363 Replacement tip for SB0220.8mm

AD195 Replacement tip for AD194 / AD242

EB221 Replacement tip for Oryx 2mm

EB220 Replacement tip for Weller (7)1.5mm 400°C, 62mm longfitting part 30mm x 6mm dia.

AB211 Replacement tip for Weller (5)0.8mm 260°C, 36mm longfitting part 17mm x 5.3mm dia.

AB212 Replacement tip for Weller (9)1.6mm 300°C, 37mm longfitting part 17mm x 5.3mm dia.

SOLDERING STANDS

SOLDERING IRON STAND

This stand is ideally suited for the solderingirons (TB001) and (AD194). One cleaningsponge is supplied.A spare cleaning sponge: (EB402)

ORDER CODE: AA065

SOLDERING IRON STANDWITH HOLDER FOR SOLDER

This soldering iron stand has a built-in holderfor one reel of solder wire and one cleaningsponge. It is ideally suited for the solderingirons (TB001) and (AD194).One cleaning sponge is supplied.Spare cleaning sponge: (EB402)The solder wire is not included.Solder Wire Reels: (MB031) or (MB048)

ORDER CODE: AD196

EB402 Cleaning Sponge for solder stand

TOOLS FORDESOLDERING ANDSOLDER REMOVAL

DESOLDERING BRAID

This is flexible, copper braid (wick) that is

used for removing solder from PCB tracks. Itis used by pressing it down against the sol-dered area with a heated soldering iron tip.The desoldering braid will transfer the heatfrom the soldering tip to the solder and thenabsorb the molten solder. The braid is on areel, has 2mm diameter and 1.5m length.

ORDER CODE: AB403

DESOLDER PUMP

Components that have been soldered onto aPCB can be removed by using this pumpand a soldering iron.

ORDER CODE: QB066

SPARE TIP FOR (QB066)

This is a spare removable tip for theDesolder Pump (QB066).

ORDER CODE: AB402

PROFESSIONALSOLDER TIP CLEANER

Diameter: 90mmSpare golden curls, (FB078), can be orderedfor the holder.

ORDER CODE: FB077

SPARE GOLDEN CURL FORSOLDER TIP CLEANER

The spare golden curls for solder tipcleaner FB077.

ORDER CODE: FB078

SOLDER WIRE

Note: Soldering wire with a resincore

MB031 Solder Wire 500g 0.71mmMB048 Solder Wire 500g 1.25mm

05.17

Blister pack that contains 50g of 0.71mmresin core soldering wire.

ORDER CODE: HB001

CIRCUITPROTOTYPING

BREADBOARDS

EB579 Breadboard AD-100 81x41x9mm(360 contact points)

AD197 Power Block with 5 Binding Poststhis attaches to breadboard EB579(the posts take 4mm banana plugs)81x30x19mm (15 contact points)

AD198 Power Bus AD-4D 81x12x9mmthis attaches to breadboard EB579(48 contact points)

PB309 Breadboard KH-102N 81x60x9mm(390 contact points)

PB168 Breadboard GL-12N 172x65x9mm(840 contact points)

QB055 Breadboard GL-10N 172x39x9mm(640 contact points)

BREADBOARD ON BASEWITH POWER POSTS GL-36N

This breadboard is mounted on a plasticbaseboard and comes with power terminals.The power terminals will accept 4mmbanana plugs.(2420 contact points 4 power posts)Dimensions: 240x195mm

ORDER CODE: XB034

JUMPER WIRES

STIFF JUMPER WIREBLISTER PACKS

Note: Each blister pack containsa multiple of stiff jumper wiresthat have the same length andinsulation colour. It is used withsolderless breadboards. Jumperwires are made of insulated,tinned copper, solid core wire.Core diameter is 0.6mm (SWG23)

AD204 2.5mm (0.1 inch) Jump Wire Pack

contains 200 uninsulated wiresAD205 5.1mm (0.2 inch) Jump Wire Pack

contains 200 Red jumper wiresAD206 7.6mm (0.3 inch) Jump Wire Pack

contains 200 Orange jumper wiresAD207 10.2mm (0.4 inch) Jump Wire Pack

contains 200 Yellow jumper wiresAD208 12.7mm (0.5 inch) Jump Wire Pack

contains 200 Green jumper wiresAD209 15.2mm (0.6 inch) Jump Wire Pack

contains 150 Blue jumper wiresAD210 17.8mm (0.7 inch) Jump Wire Pack

contains 150 Violet jumper wiresAD211 20.3mm (0.8 inch) Jump Wire Pack

contains 150 Grey jumper wiresAD212 22.9mm (0.9 inch) Jump Wire Pack

contains 150 White jumper wiresAD213 25.4mm (1 inch) Jump Wire Pack

contains 100 Brown jumper wiresAD214 50.8mm (2 inch) Jump Wire Pack

contains 100 Red jumper wiresAD215 76.2mm (3 inch) Jump Wire Pack

contains 75 Orange jumper wiresAD216 102mm (4 inch) Jump Wire Pack

contains 75 Yellow jumper wiresAD217 127mm (5 inch) Jump Wire Pack

contains 75 Green jumper wires

STIFF JUMPER WIRE KITS

Note: These are sets of insulated,tinned copper, solid core, stiffjumper wires.Core diameter is 0.6mm (SWG23)

JUMP WIRE KIT (14 X 5 PCS)14 Different lengths, 5 wires of each length.

ORDER CODE: EB583

JUMP WIRE KIT (14 X 10 PCS)14 Different lengths, 10 wires of each length.

ORDER CODE: EB582

JUMP WIRE KIT (14 X 25 PCS)

14 Different lengths, 25 wires of each length.Different Lengths: 2.54mm, 5mm, 7.62mm,

10.16mm, 12.7mm, 15.24mm, 17.78mm,20.32mm, 22.86mm, 25.4mm, 50.8mm,101.6mm, 76.2mm and 127mm

Wire Core Diameter is 0.6mmBox Dimension: 134 x 272mm, 32mm height

ORDER CODE: AD199

FLEXIBLE JUMPER WIRES

05.18

Note: These are flexible jumperwires that are used with solder-less breadboards. Each jumperhas 11 strands of 0.16mm copperwire that is very flexible. It has astiff, hard, gold-plated pin andeyelet at each end. The eyeletsare ideal for clipping on oscillo-scope probes and makes con-venient testing points. Each eye-let has a 2mm hole diameter.Each pin is 0.6mm thick and7mm long.

AB332 Flexible Jumper Wire 15cm lengthAB333 Flexible Jumper Wire 30cm lengthAB334 Flexible Jumper Wire 45cm lengthAB335 Flexible Jumper Wire 60cm length

50mm FLEXY JUMP WIRE PACK

Blister pack that contains 10 flexible jumperwires. The length of each jumper wire,excluding the length of pins, is 50mm. Eachjumper wire has a stiff, hard pin at each end.Pin Dimensions: 0.6mm dia. x 7mm length.

ORDER CODE: AD200


Blister pack that contains 10 flexible jumperwires. The length of each jumper wire,excluding the length of pins, is 70mm. Each

jumper wire has a stiff, hard pin at each end.Pin Dimensions: 0.6mm dia. x 7mm length.

ORDER CODE: AD201



ORDER CODE: AD202



ORDER CODE: AD203

STRIPBOARD /VEROBOARD

GB811 1 Sided Dot-grid BoardGold-plated tracks38 x 60 holes, paper based0.1 inch, 2.54mm spacingDimensions: 100 x 160mm

QB056 1 Sided StripboardGold-plated tracks38 x 60 holes, paper based0.1 inch, 2.54mm spacing

Dimensions: 100 x 160mm

AB152 1 Sided Eurocard IC Patterntinned tracks, fibreglassmore than 38 x 52, 1.05mm dia.0.1 inch, 2.54mm spacingDimensions: 100 x 160mm

AB153 1 Sided Eurocard Full Linetinned tracks, fibreglassmore than 38 x 55, 1.05mm dia.0.1 inch, 2.54mm spacingDimensions: 100 x 160mm

AB154 1 Side Eurocard 3-Hole Islandstinned tracks, fibreglassmore than 38 x 55, 1.05mm dia.0.1 inch, 2.54mm spacingDimensions: 100 x 160mm

PRINTED CIRCUIT BOARD(PCB)

Note: Fibreglass Board (FR4)Paper Based Board (FR2)Copper layer is 35 microns thick

MIXED PACK OF PCBs

A mixed pack that contains different PCBs.PCBs are plain, copper-laminated single anddouble sided. Weight: approximately 500g.

ORDER CODE: AB636

05.19

FIBREGLASS SINGLE SIDED 0.51MM

AB239 100x160x0.51mm FR4AD189 160x200x0.51mm FR4

FIBREGLASS SINGLE SIDED 1.55MM

QB057 100x160x1.55mm FR4AD190 160x200x1.55mm FR4AD191 200x320x1.55mm FR4

PRESENSITIZEDPRINTED CIRCUIT BOARD

Note: The boards are protectedagainst unwanted light exposure,dirt and scratches by a special,coloured, adhesive layer thatshould be peeled off only justbefore use.Presensitized: copper layer iscovered with Ultra Violet lightsensitive, positive working var-nish 5 µm thick.Fibreglass Board (FR4) andPaper Board (Pertinax) (FR2)1.5mm thick. Copper layer 35micron.Use a transparency with solidblack artwork to create a positiveimage of varnish on the copperlayer of the board. Eventuallyblack on the transparency willbecome copper on the etchedboard.Exposure Time: 5 minutes withUV light:use one or more of blacklight(GB494).Insure good contact between theartwork and the board.Development solution: 10g caus-tic soda per liter of water.During the etching process cop-

per is removed from the boardexcept where protected by var-nish. Etching solution: 400g ferricchloride per litre of waterShelf life of the board is morethan a year at normal room tem-perature.

SINGLE SIDED BOARDGB810 100x160mm FR2 paper basedAC983 100x220mm FR4 fibreglass

FIBREGLASS PRESENSITIZEDDOUBLE SIDED BOARD

AC984 100x220mm FR4 fibreglass

PCB ETCHING SET

This starter set is ideal for etching printedcircuit boards (PCBs). It contains:3 Single sided bare copper FR2 PCBs:

1 x PCB: 100 x 160mm2 x PCB: 80 x 100mm

1 Presensitized single sided FR2 PCB:black adhesive layer: 80 x 100mm

Developer for presensitized PCBEtching Chemical for removing copper1 Pair of plastic Tweezers1 Plastic Etching Bowland comprehensive, illustrated Instructions

ORDER CODE: GB758

PCB ACCESSORIES

CONDUCTING SILVER

This Silver-conductive varnish conducts elec-tricity very well and adheres to glass, circuitboards, ceramics etc. It is ideal for repairingwindow alarm loops, window antennas, win-dow heatings and circuit boards.Conducting Capacity: 0,02 to 0,1 Ohm/cm²Contained in glass bottle with Outer Dimensions: 10mm dia. 49mm longSilver Contents of the bottle approx. 3g

ORDER CODE: GB756

DEVELOPER FORPRESENSITIZED PCBs

Positive developer for presensitized PCBs.One packet of developer is mixed with onelitre of water. One litre of the solution is suffi-cient for about 0.5 m² of board. The develop-ment process should be assisted by tilting

the board lightly up and down within thesolution. Complete development is achievedwithin about 45 seconds. It is necessary torinse the board under flowing tap water afterdevelopment has been completed.

ORDER CODE: AC985

HEXAHYDROUS /FERRIC CHLORIDEGRANULES 400G

Dissolves or etches the unprotected copperlayer parts on a PCB. Make a solution bymixing 1 part of the chemical with 2 parts ofwater. Sufficient to make 1 Litre.

ORDER CODE: PB149

PCB ETCH RESISTANTMARKER PEN

The pen is used to draw the circuit tracesdirectly on the PCB. This is a easy way tomake your own PCB’s.

ORDER CODE: MB057

POSITIVE 20 PHOTORESISTANTFOR PCB PRODUCTION

Ultra Violet light sensitive Positive 20 is usedfor producing PCB with a photographicprocess. A positive of the circuit layout isused to produce the PCB.

ORDER CODE: PB280

SOFTWARE

ELEKTOR CD-ROMS

ANNUAL VOLUME OF ELEKTORMAGAZINES ON CD-ROM

Note: Each annual Elektor CDcontains all the editorial articles,except the News and NewProducts sections, in the Volumeof editions of the English Elektormagazine published during thatyear. Using Acrobat Reader (sup-plied on the CD-ROM). Articlesare presented in the same layoutas originally found in the maga-zine.Features:Produce hard copy of PCB lay-outs at printer resolution,Adapt PCB layouts using yourfavourite graphics program,Zoom in / out on selected PCBareas,

05.20

An extensive search machine isavailable

to locate keywords in any arti-cle,

including those contained onprevious annual CD-ROMs

Ideal companion for science proj-ectsExport circuit diagrams and

illustrations to other programsCD ELEKTOR 1996

ORDER CODE: GB533

CD ELEKTOR 1997

ORDER CODE: GB534

CD ELEKTOR 1999

ORDER CODE: GB539

CD ELEKTOR 2000

ORDER CODE: GB540

CD ELEKTOR 2001

NEW: HTML overview for MacintoshOperatin System and Linux users

ORDER CODE: GB541

CD ELEKTOR 2002

NEW: HTML overview for MacintoshOperatin System and Linux users.

ORDER CODE: AB092

CD ELEKTOR 2003

ORDER CODE: AB187

CD ELEKTOR 2004

ORDER CODE: AC607

CD ELEKTOR 2005

NEW Features:The installation program now allows Elektor

year volume CD-ROMs you have avail-able to be copied to hard disk, so you donot have to eject and insert your CDswhen searching in another year volume.Simply follow the steps indicated with theprogram DiskMirror.

HTML overview for Macintosh OperatinSystem and Linux users

ORDER CODE: AD166

OTHER ELEKTOR CD-ROMS

SOFTWARE TOOLBOX 1

This is the first CD-ROM in the TOOLBOXseries. It contains essential information andtools needed by every electronics enthusiastfor programming the microprocessor-drivenhardware that he / she is developing.It covers the following topics:- programming tools for the developer (sdCCfor 8051 microcontrollers and the GNU envi-ronment for 68HC11 microcontrollers)- subroutines for arithmetic operations onsigned and unsigned numbers and for DSP(add, substract, multiply, divide, BCD, fixedpoint, floating point, square root, fft, etc.)- serial communication (RS232, RS485, I2C,USB and more)- infrared communication (theory, practicalexamples, useful tips)- how to implement A/D and D/A conversionon various microcontrollers- how to achieve passive and active filteringon various microcontrollers- how to interface LCD displays with variousmicrocontrollers- miscellaneous, mainly I/O related topics,including battery charging, buffering, dialling,fuzzy logic, keypad decoding, measuring,motor driving, sorting, etc.)- overview of the IEEE-754 standard forfloating-point number representation, and- overview of the MIDI interface, with empha-sis on the less known MIDI SHOW CON-TROL protocol, where the MIDI interface isused to control multimedia gear.

ORDER CODE: AC773

05.21

SOFTWARE TOOLBOX 2

The second Toolbox CD-ROM contains avast collection of carefully selected softwaretools for the electronics enthusiast.In your profession or hobby, how often didyou experience that your project failed toreach the target in time because essentialinformation was missing? Toolbox 2 offersnew inroads to obtain information you justcan't do without. This new CD-ROM containssoftware tools for, and information about,microcontrollers. However, just being awareof the existence of a microcontroller is oftennot sufficient - available data often needs tobe extended with facts and figures about theright memory devices and communicationchannels.That's why this CD-ROM gives specificattention to technical documentation (specifi-cations, application notes, standards) aboutprotocols (DiSEqC - Digital SatelliteEquipment Control), field buses (includingLON and HART), as well as modern informa-tion carriers (Smart Media, CompactFlash,SD card, etc.) which find increasing use.The hardware side of things is not forgotteneither - Toolbox 2 contains data on connec-tors, cables and adapters (audio/video,GSM, memory, networks, parallel, serial,keyboard/mouse).The CD-ROM also contains a large numberof useful Internet addresses.

ORDER CODE: AB090

FREEWARE & SHAREWARE 2003

Just like previous editions, the crop of 2003supplies useful programs that can be run onvarious operating systems, linked directly orindirectly to electronics in general, program-ming, microcontrollers for sure, but also tomany allied areas.Besides the usual sections (CAD, Audio,Calculation Tools, Programming, Simulation,etc.) the 2003 edition of the Freeware &Shareware CD-ROM contains a collection of'must-haves' which are not specifically linkedto electronics, but valuable when it comes towriting or manipulating programs and files(assembly code, C, Delphi and others). Thiscollection comprises utilities like xnView (forgraphics file visualisation), dirprint (file, direc-tory and subdirectory listing), TotalCommander (previously known as Windows

Commander) and other ingenious softwarecovering functions like file renaming.

ORDER CODE: AB091

ECD ELEKTOR'SCOMPONENTS DATABASE

Elektor's first interactive Databank CD-ROMhas just been published!This CD-ROM is a must-have for all elec-tronics enthusiasts.ECD is Windows XP compatibleThe program package consists of four data-banks covering ICs, transistors, diodes andoptocouplers. A further nine applicationscover the calculation of, for example, zenerdiode series resistors, voltage regulators,voltage dividers and AMV's. A colour banddecoder is included for determining resistorand inductor values.The ECD gives you easy access to designdata for over 5,300 ICs, over 22,500 bipolartransistors, over 4,900 FETs, thyristors andtriacs, just under 25,000 diodes and 1,800optocouplers.All databank applications are fully interactive,allowing the user to add, edit and completecomponent data.

ORDER CODE: AB093

THE AUDIO COLLECTION 1

This CD contains more than 75 audio circuitdesigns from the past five year volumes ofElektor Electronics magazine. The circuitsare Ideal for home construction.Some examples of circuits that are included:

surround-sound decoder,compact audio amplifier,sampling rate converter,battery powered preamplifier,the Titan 2000

Using the included Acrobat Reader you areable to browse the articles on your computer,as well as print texts, circuit diagrams andPCB layouts.

ORDER CODE: AC890

THE AUDIO COLLECTION 2

This CD contains more than 75 audio circuitdesigns from the past five year volumes ofElektor Electronics magazine. The circuitsare Ideal for home construction.Articles on the CD-ROM cover:

test & measurement equipment,amplifiers,digital audio andloudspeaker technology

Highlights include:Audio-DAC 2000,Audio-ADC 2000 andthe IR-S/PDIF Transmitter and Receiver

Using the included Acrobat Reader you areable to browse the articles on your computer,as well as print texts, circuit diagrams andPCB layouts.

ORDER CODE: AD265

EDUCATIONAL CD-ROMS

DIGITAL ELECTRONICS

This CD-ROM is an extensive introductioninto the principles and practice of digitalelectronics and discusses a.o. binary andhexadecimal applications, fundamentalgates, monostables, JK- and D-type flip-flops, equivalent logic, specialized logic func-tions (including parity checkers, multiplexers,half and full adders, scrambling circuits),clocks, counters, BCD, shift registers, A/Dand D/A converters, memories and an intro-duction to microprocessor-based systems. Alarge number of common digital ICs andphotographs of digital circuit applications isalso included.Features:Circuit simulation carried out on-screenUnique virtual laboratoriesEditable worksheetsFull audio commentaryOver 20 links to pre-designed electronicsworkbench circuits and crocodile clips

ORDER CODE: FB124

05.22

ROBOTICS ACTUATORS & SEN-SORS MECHANICAL

In Robotics, electronics meets informationtechnology as well as mechanical engineer-ing. The meeting results in a boundlessexperimental field. Do you want to exploreit? For beginners the shortest way is alongthe kits line, while experienced users andprogrammers are best served by DIY con-struction. Both options are available on thisCD-ROM thanks to a large collection ofdatasheets, software tools, tips and tricks,addresses, Internet links to assorted robotconstructions and general technical informa-tion. All aspects of modern robotics are cov-ered, from sensors to motors, mechanicalparts to microcontrollers, not forgettingmatching programming tools and libraries forsignal processing. Robots built from LEGO®bricks also get a fair amount of attention.

ORDER CODE: AC608

EAGLE PCB DESIGNSOFTWARE

The Eagle software is an easy to use, yetpowerful tool for designing printed circuitboards (PCBs). The name EAGLE is anacronym, which stands for:Easily Applicable Graphical Layout EditorYou can use Eagle to create PCB films anddocumentation that satisfy the highestdemands on quality. There is no need tocompromise either quality or size.Features:-Eagle software is very easy to use, in spiteof all its facilities.-Schematic, Layout and Component editorshave identical user interfaces.-Includes a full set of parts (components)libraries.-Easily create your own parts.-The program includes three modules:1)Schematic Creator / Editor - used for mak-ing a schematic representation of an elec-tronic circuit using standard component sym-bols.2)PCB Layout Editor - used for designing thePCB artwork that consists of the actual cop-per signal tracks, component footprints, con-nection pads, etc.

3)Autorouter - this takes a lot of routine cir-cuit layout work away from you. It can han-dle boards of up to 16 layers and the small-est routing grid is 0.02mm. Automatic routingcan be applied to individual signals, groupsof signals or to all signals that have to berouted.-CAM Processor: matrix, laser, postscriptprinters and pen plotters. Also write Gerber,Excellon and Sieb&Meyer files.Hardware Requirements:IBM compatible PC 586 (or higher)Windows 95/98/NT4/2000/XPMouseRAM: at least 32MBHard Disk: at least 40MB of free space.3.5’’ Stiffy Drive for reading the license file

AA449 EAGLE Light for 1 user,Includes all three modulesMax. 1 schematic sheetMax. 2 signal layers(Max. PCB size 100 x 80mm)

GB747 EAGLE Non-profit for 1 user,Includes all three modulesMax. 4 signal layersNon-profit, declaration is required(Max. PCB Size 160x100mm)

AC012 EAGLE Standard 4.1 for 1 user,Includes all three modulesMax. 99 schematic sheetsMax. 4 signal layers(Max. PCB size 160 x 100mm)

AC011 EAGLE Professional 4.1 for 1 user,Includes all three modulesMax. 99 schematic sheetsMax. 16 signal layers(Max. PCB size 1600 x 1600mm)

POWERSUPPLIES AND

INVERTERS

RECTIFYINGPOWER SUPPLIES

Note: Each of these power sup-plies will accept an AC input volt-age from a transformer and recti-fy (convert) it to give a DC outputvoltage. These power supplieshave to be used together withsuitable transformers

25V DC POWER SUPPLY MODULE

Features:Screw terminal inputs and outputs6 Amp bridge rectifier

One 4700µF smoothing capacitorsUse only correctly rated transformerMaximum Transformer Voltage: 16VacMaximum Transformer / Output Current: 6ADimensions: 50 x 55mm, 40mm height

ORDER CODE: AA290

25V-0-25V DCDUAL POWER SUPPLY MODULE

Features:Screw terminal inputs and outputs6 Amp bridge rectifierTwo 4700µF smoothing capacitorsUse only correctly rated transformerMaximum Transformer Voltage: 16-0-16VacMaximum Transformer / Output Current: 6ADimensions: 58 x 55mm, 40mm height

ORDER CODE: AA292

50V DC POWER SUPPLY MODULE

Features:Screw terminal inputs and outputs6 Amp bridge rectifierOne 4700µF smoothing capacitorsUse only correctly rated transformerMaximum Transformer Voltage: 30VacMaximum Transformer / Output Current: 6ADimensions: 50 x 55mm, 55mm height

ORDER CODE: AA291

50V-0-50V DCDUAL POWER SUPPLY MODULE

Features:Screw terminal inputs and outputs6 Amp bridge rectifierTwo 4700µF smoothing capacitorsUse only correctly rated transformerMaximum Transformer Voltage: 30-0-30VacMaximum Transformer / Output Current: 6ADimensions: 58 x 55mm, 55mm height

ORDER CODE: AA258

05.23

PLUG IN UNREGULATEDAC TO DC ADAPTORS

Note: European Plug (2 roundpins)Input: 230Vac / 50 HzThermal cut-offDC plug: 2.1 x 5.5mmCord: 1.85m

GB836 9Vdc / 500mA (non-regulated)Dimensions: 66 x 49 x 42mm

AB006 9Vdc / 800mA (non-regulated)Dimensions: 87 x 58 x 51mm

AC672 9Vdc / 1000mA (non-regulated)Dimensions: 87 x 58 x 51mm

AC673 12Vdc / 1000mA (non-regulated)Dimensions: 101 x 71 x 59mm

AB510 15Vdc / 1000mA (non-regulated)Dimensions: 101 x 71 x 59mm

GC304 24Vdc / 1000mA (non-regulated)Dimensions: 85 x 110 x 68mm

UNIVERSAL ADJUSTABLEAC TO DC ADAPTORS

Note: Input Voltage: 220VacSelectable Output Voltages:

(non-regulated)3 / 4.5 / 6 / 7.5 / 9 / 12Vdc

Multi-connectorPolarity ChangerCord: 1.5m

AA729 500mA, 90 x 55 x 46mmAA730 1000mA, 110 x 62 x 54mm

FIXED VOLTAGEREGULATED

POWER SUPPLIES

FIXED 13.8VDC / 10APOWER SUPPLY

Features:Short-circuit protectedFuse-protectedHousing: white-grey plasticSpecifications:Supply Voltage: 230VacOutput Voltage: 13.8Vdc (regulated)Ripple Voltage: 120mVOutput Current Range: 0 to 10A (12A max.)Power Connections: 4mm banana socketsDimensions: 175 x 160 x 90mmWeight: 4.0kg

ORDER CODE: AB408

FIXED 13.8VDC / 30APOWER SUPPLY

Features:Short-circuit protectedFuse-protectedHousing: white-grey plasticSpecifications:Supply Voltage: 230VacOutput Voltage: 13.8Vdc (regulated)Ripple Voltage: 150mVOutput Current Range: 0 to 30A (32A max.)Power Connections: 4mm banana socketsDimensions: 290 x 200 x 110mmWeight: 9.3kg

ORDER CODE: AB259

70W SWITCH MODEPOWER SUPPLIES

Note: Get rid of those bulky

power-hungry heat-producingmains adapters. These adaptersuse state-of-the-art switchingmode power supplies and featuremajor advantages such as:

cooler runningregulated DC outputshort-circuit / overload protec-

tioncompact designvery low current consumption

Features:Universal Input Voltage Range:

90 - 264Vac (47 - 63Hz)Continuous Short-circuitProtectionHigh Efficiency: 85%meets UL, CSA, TUV, CE stan-dardsIdeal as spare power supply forportable PC

SWITCH MODE ADAPTER 12VDCSpecifications:Output Voltage: 12Vdc (regulated)Output Current: 5.5A max.Ripple and Noise: 1%Voltage Accuracy: ± 2%Line Regulation: ± 1%Load Regulation: ± 5%Input Characteristics:

Input Voltage: 90 - 264Vac (47 - 63Hz)Inrush Current: 50A max. @ 264Vac

Input to Output Insulation: 4242VdcLeakage Current: 0.25mAOutput characteristics:

Short-circuit Protection: continuousOperating Temperature: 0°C to +40°CConnector: 2.1 x 5.5mmCable Length: ±190cmPlease Note:The IEC Mains Cable (EB003) is requiredDimensions: 133 x 58 x 32mm

ORDER CODE: AB357

VARIABLE VOLTAGEREGULATED

POWER SUPPLIES

VARIABLE DC LABPOWER SUPPLY 0-15V/3A

Features:LCD displays with backlight for voltage and

currentAdjustable voltage and current

05.24

Fuse-protectedHousing: plastic front panel / other panels

made of steelOutput power connectors: IEC1010

(4mm banana sockets / binding posts)Specifications:Supply Voltage: 230VacOutput Voltage Range: 0-15V adjustableOutput Current Range: 0-3A adjustableRipple Voltage: 1.0mV(rms)Dimensions: 215 x 155 x 95mmWeight: 3.5kg

ORDER CODE: EB404

VARIABLE DC LABPOWER SUPPLY 0-30V/10A

Features:Two 7-segment LED displays for voltage and

currentThere are coarse and fine adjustment knobs

for voltage and currentProtection mode: current limit set with knobFuse-protected and short-circuit protectedHousing: plastic front panel / other panels


(4mm banana sockets / binding posts)Specifications:Supply Voltage: 230VacOutput Voltage Range: 0-30V adjustableOutput Current Range: 0-10A adjustableRipple Voltage: 1.0mVRipple Current: 5mADimensions: 310 x 265 x 135mmWeight: 12.0kg

ORDER CODE: AC995

VARIABLE DC LABDUAL POWER SUPPLY2 X 0 - 30V / 2 X 0 - 3A

Features:Analogue Displays: voltage and currentProtection mode: current-limit set with knobOutput Power Connections: IEC1010

(4mm banana sockets / binding posts)Specifications:Supply Voltage: 230VacOutput Voltage Range: 2 x 30V (adjustable)Output Current Range: 2 x 3A (adjustable)Ripple Voltage: 1mVRipple Current: 5mADimensions: 330 x 200 x 155mmWeight: 9.3kg

ORDER CODE: AB062

VARIABLE DC LABDUAL POWER SUPPLY

2 X 0 - 30V & 5V / 2 X 0 - 10A

Features:This power supply has two power sections

that can either be used seperately or beconnected in series or in parallel

Four LCD Displays: two for voltage and twofor current

Protection mode: current limit set with knobFuse-protectedHousing: plastic front panel / other panels


(4mm banana sockets / binding posts)Specifications:Supply Voltage: 230VacFixed Output: 5Vdc / 10A maximumOutput Voltage Range: 2 x 0-30V adjustableOutput Current Range: 2 x 0-10A adjustableRipple Voltage: 1mVDimensions: 360 x 265 x 165mmWeight: 11.6kg

ORDER CODE: AC953

VARIABLE DCVOLTAGE SUPPLY 3-15V/1.5A

This variable, DC voltage power supply isideal for low power loads that require a spe-cific fixed, stabilized voltage.Specifications:Short circuit-proofInput Voltage Range: 6 - 28VdcOutput Voltage Range: stabilized 3 - 15VdcNote: the input voltage must always be atleast 3V larger than the output voltageOutput Current: 1.5A max.Power Dissipation: 10W with 60x60x20mmribbed heat sink (not included) and 3W max.without a heat sinkDimensions: 70 x 55 x 25mm

ORDER CODE: GB752

UNIVERSAL SWITCH MODEADAPTER 230VAC / 120W

This is an universal, switch mode, powersupply with a regulated DC output. Thispower supply is ideal for notebook comput-ers and digital electronic devices. An outputvoltage can be selected from 15 to 24Vdc. Itis compact, efficient and has low output rip-ple voltage. It has six detachable, DC powerplugs. It is short-circuit- and overload-pro-tected.Specifications:Supply Voltage: 100 - 240VacSelectable DC Regulated Output Voltages:15, 16, 18, 19, 20, 22 or 24VdcOutput Current:6A max. for 15, 16, 18, 19 or 20Vdc ouput5A max. for 22 or 24Vdc outputOutput Power: 120W max.Output Connecting DC Plugs:straight types: 6.5x4.5, 6.3x3.0, 4.75x1.7mmright-angled types: 5.5x2.5, 5.5x2.1mmPlease Note:The IEC Mains Cable (EB003) is requiredDimensions: 175 x 65 x 40mm

ORDER CODE: AB406

INVERTERS

Note: Used for computers, televi-sions and VCR’s, home stereos,CD playerslighting fixturesfans and fax machinesmedical instrumentscommunication systemsFeatures:Soft-Start series: compact dimen-sionsadvantage of soft-start series:can start inductive loads (e.g.drill)modified sine wave, (SquareWave), outputoutput is Short-Circuit ProtectedLow-Battery Alarm Low-Battery Shutdown FunctionThermal and Overload ProtectionChild-Safe

12VDC TO 230VAC POWERINVERTER SQUARE WAVE 150W

05.25

Specifications:Supply Voltage: 12Vdc (10-15V)Output Voltage: 230VacNo Load Current: 430mA max.Power Socket Outlet: spring earth typePlease note: the inverter requires one 2 PinEuropean Power Plug (GB829) or (GB830)Rated Output Power: 150WDimensions: 150 x 92 x 58mmWeight: 0.8kg

ORDER CODE: EB924


Specifications:Supply Voltage: 12Vdc (10-15V)Output Voltage: 230VacNo Load Current: 400mA max.Power Socket Outlet: spring earth typePlease note: the inverter requires one 2 PinEuropean Power Plug (GB829) or (GB830)Rated Output Power: 300WDimensions: 190 x 92 x 58mmWeight: 1.0kg

ORDER CODE: FB484


Specifications:Supply Voltage: 12Vdc (10-15Vdc)No Load Current: 1.2A max.Fuse: 4 x 35A fuse, 4 x (AB194)Output Voltage: 230VacPower Socket Outlet: spring earth typePlease note: the inverter requires two 2 PinEuropean Power Plugs (GB829) or (GB830)Rated Output Power: 1000WDimensions: 242 x 80 x 393mmWeight: 3.15kg

ORDER CODE: AB192


Specifications:Supply Voltage: 24Vdc (20-30Vdc)No Load Current: 700mA max.Fuse: 2 x 30A fuse, 2 x (AA639)Output Voltage: 230VacPower Socket Outlet: spring earth typePlease note: the inverter requires two 2 PinEuropean Power Plugs (GB829) or (GB830)Rated Output Power: 1000W

Dimensions: 242 x 80 x 393mmWeight: 3.15kg

ORDER CODE: AB193

VOLTAGE CONVERTERS

24VDC TO 12VDC CONVERTER1.1A MAX.

This module converts a 24Vdc input to12Vdc. This module may be used in a lorrywith 24V batteries to power 12Vdc devices.The maximum load current per module is1.1A. Several modules may be connected inparallel to increase the current output.

ORDER CODE: GB774

24VDC TO 12VDC CONVERTER3A MAX.

This module converts a 24Vdc input to12Vdc. This module may be used in a lorrywith 24V batteries to power 12Vdc devices.The maximum load current per module is3A. Short circuit-proof. Requires a ribbedheat sink 50 x 100 x 30 mm at full load.

ORDER CODE: GB782

24VDC TO 12VDC CONVERTER20A MAX.

This DC-to-DC voltage converter changes a24Vdc input to 12Vdc output. It may be usedin a lorry, with 24V batteries, to power 12Vdcdevices.Specifications:Input Voltage: 24VdcOutput Voltage: 12VdcMaximum Output Current: 20AFuse-ProtectedOutput Power Connectors:

(4mm banana sockets / binding posts)ORDER CODE: AC918

IN-CAR REGULATED DC STEPUPSWITCH MODE ADAPTER 120W

This is a regulated DC, stepup, switch modepower supply. It is ideal for use within a carthat has a 12Vdc power system. Now youcan operate your favourite electronic gear inyour car. Equipped with plugs that can beused virtually anywhere. They can be con-nected with your car’s cigarette plug (withneg. ground). Ideal for notebook computersand digital electronic devices. It is fuse-,short-circuit- and overload-protected withthermal cut-off.Specifications:Input Voltage: 12 - 16VdcSelectable DC Regulated Output Voltages:15, 16, 18, 19, 20, 22 or 24VdcOutput Current:6A max. for 15, 16, 18, 19 or 20Vdc ouput5A max. for 22 or 24Vdc outputOutput Power: 120W max.Output Connecting DC Plugs:straight types: 6.5x4.5, 6.3x3.0, 4.75x1.7mmright-angled types: 5.5x2.5, 5.5x2.1mm

ORDER CODE: AB358

STEPUP DC VOLTAGE CONVERTER6 - 12VDC TO 11 - 26V

This module takes a DC input voltage andgives a DC output voltage that is nearly dou-ble the input. With an additional linear poten-tiometer of 4.7k (HB166) one can limit theoutput voltage within a preset lower value.The maximum input voltage is 14.5Vdc. Theoutput voltage decreases linearly withincrease of load current. Load currentsshould preferably not exceed 1A.

ORDER CODE: GB781

SOLAR POWER DC TO DCCONVERTER

05.26

This module takes a low DC voltage input,(0.3 to 0.5Vdc), from a solar cell and con-verts it to a higher stabilized output voltage.The output voltage is just larger than 12Vdcat a load current of 50mA. Use a 12V, 0.5WZener diode for 12V voltage regulation. It isideal for low current battery charging.

ORDER CODE: GB790

SOLAR PANELSAND ACCESSORIES

Note: Solar cells and panels areused to convert light energy intoelectrical energy. Solar cells cansupply electric current to an elec-trical load only while light isbeing shined onto the light sensi-tive area of the cell. Solar panelsshould be mounted in a positionwhere they will receive maximumsunlight.

SOLAR CHARGING CONTROLLER12VDC / 5A MAX.

This module is an electronic switch that isused in a solar powered battery chargingsystem. This module electrically connectsthe solar cell(s) to a 12V lead acid batterywhile charging. This module disconnects thecharging current once the battery is fullycharged. A low-loss MOS transistor is usedfor switching the charging current.Please note: You must directly connect themodule’s battery leads to the 12V batteryterminals, if possible. Use a 5 Amp fuse toprotect the module.Specifications:Input Current: max. 5AInput Voltage from Solar Cells: 14 to 22VdcConnecting Voltage: less than 13.0VdcDisconnecting Voltage: larger than 13.4VdcLED Indicators:

orange LED “charging”green LED “full” when not charging

Own Power Consumption: max. 3.9mADimensions: 72 x 50 x 27mmRequired: (not included)Fuse: 5A fuse (AA951)Fuse Holder: in-line type (FB471)

ORDER CODE: GB787

SOLAR CELL 0.5V / 800MA

voltage : 0.5Vcurrent : 800mAconnections : leads

dimensions : 57 x 57 x 7mmORDER CODE: GB765

SOLAR CELL 2V / 200MA77X21X3.0mm

voltage : 2Vcurrent : 200mAconnections : leadsdimensions : 66x 95 x 6mm

ORDER CODE: FB118

SOLAR PANEL 13.5V / 4.7W352X338X16mm

This solar panel can be used to tricklecharge 12V lead acid batteries of a vehicleor boat. It is also ideal for powering remotesecurity sensors, low power transmitters, etc.Features:It is double glass lamination for protection,weather-resistant,built-in indicator light that is on while it ischarging a battery.Specifications:Output Voltage: 13.5VOutput Current: 350mAOutput Power Rating: 4.7WConnections: 3m leads with crocodile

battery clamps and cigarette lighter plugColour of Casing: greyDimensions: 352 x 338 x 16mm

ORDER CODE: AD061

05.27

MISCELLANEOUSCOMPRESSION AND TENSION

SPRINGS 30pcs

AB648

A mixed pack that contains 30 springs of thecompression and tension type.

ORDER CODE: AB648

ADHESIVES

Clear, all purpose adhesive. Formulated forbonding china, pottery, glass, wood, leatherand most plastics. Ideally suited for stickingwires to walls, ceilings and more. (Do notuse on enamel painted surfaces). Applyadhesive, bring surfaces together, separatesurfaces until tacky then press the surfacesfirmly together.50ml Tube.

ORDER CODE: MB076

TAPE

Note: Double sided foam tape

AB074 5m x 18mm x 1.2mm

EB189 Insulation Tape Black 20m

ADHESIVE RUBBER FEET

AB349 Round shape 10.7 dia. x 5.2mmthe packet contains 20 pieces

AB350 Square shape 9.7 x 9.7 x 2mmthe packet contains 10 pieces

GROMMETS

AA695 Grommet 3.2mmØ hole fit 1.6mmthick panel 4.8mmØ hole

FB705 Grommet 4mmØ hole fit 1.6mmthick panel 6.4mmØ hole

AA696 Grommet 4.5mmØ hole fit 1.6mmthick panel 8mmØ hole

GB521 Grommet 6.3mmØ hole fit 1.6mmthick panel 9.5mmØ

AA938 Grommet 8mmØ hole fit 1.6mmthick panel 11mmØ hole

AA697 Grommet 9.5mmØ hole fit 1.6mmthick panel 12.7mmØ hole

GEARS AND PULLEYS

MOTOR MOUNTING CLIPSPACK OF 10pcs

A pack that contains 10 plastic motor clips.Each clip can be used to mount a round, DCpermanent magnet motor. Please note thatthe motor is not included.Dimensions:Clips onto a round motor with Diameter:

20 - 24mmMounting Base: 25 x 39mmHeight: 24.5mm

ORDER CODE: AC892

MOTOR GEAR / PULLEYPACK OF 10pcs

A pack that contains 10 clear nylon spurgear / pulleys. It can be used as a pinion,(smaller driving gear), when mounted onto a2mm shaft of an electric motor. It will meshperfectly with all the advertised red gears.Each gear / pulley has a removable, tight fit-ting ring that is pushed onto the side shaft ofthe gear. This ring is used to adjust the pul-ley’s belt contact width.Specifications:Number of Cogs (Gear Teeth) per Gear: 10Meshing Radius of Gear: 4.5mmGear Dimensions:

Outer Diameter: 12mmWidth: 4mmHole Diameter for Shaft: 2mm

Belt Contact Diameter of Pulley: 5mmMaximum Belt Contact Width: 3mmTotal Length: 11mmHint:This gear / pulley can be used with any ofthe following DC permanent magnet motors:

Motor 1.5 to 3Vdc 10 000rpm: (AB214)Motor 2.4 to 6Vdc 11 400rpm: (AA902)

ORDER CODE: AC840

GEAR PACKPACK OF 50pcs

A pack that contains 40 spur gears and 10coupling shafts. All the parts are made ofred, hard plastic.Gears are supplied in 4 different sizes and10 gears of each size.Four Gear Sizes:15 Toothed Spur Gear:

Meshing Radius of Gear: 7.5mmOuter Diameter: 17mmWidth: 6mmHole Diameter for Shaft: 4mm

30 Toothed Spur Gear:Meshing Radius of Gear: 14.6mmOuter Diameter: 31.8mmWidth: 6mmHole Diameter for Shaft: 4mm

45 Toothed Spur Gear:Meshing Radius of Gear: 22mmOuter Diameter: 46.8mmWidth: 6mmHole Diameter for Shaft: 4mm

06.1

HARDWARE

75 Toothed Spur Gear:Meshing Radius of Gear: 36.8mmOuter Diameter: 76.3mmWidth: 6mmHole Diameter for Shaft: 4mm

Coupling Shaft:It is used to connect 2 gears together axially.

Connecting Distance: 8mmOuter Diameter: 15mmHole Diameter for Shaft: 4mm

ORDER CODE: AC834

SPECIALIZED GEAR PACKPACK OF 40pcs

A pack that contains 40 specialized gears.The gears are made of red, hard plastic.Four different types of gears are suppliedand 10 gears of each type.

Worm Gear:12 Gear Teeth per 37mm Gear LengthMeshing Radius of Gear: 6.5mmOuter Diameter: 15mmLength: 38.6mmHole Diameter for Shaft: 4mm

Toothed Rack Gear:This gear will mesh perfectly with all theadvertised red gears, except the worm gear.

48 Gear Teeth per 150.3mm Gear LengthLength: 150.3mmWidth: 5.5mmHeight: 11mm

Bevel Gear:Number of Gear Teeth per Gear: 20

Meshing Radius with Spur Gear: 10.3mmMeshing Radius with Crown Gear: 8.6mmOuter Diameter: 22mmheight: 14.2mmHole Diameter for Shaft: 4mm

Crown Gear:This gear is meant to be used together withthe bevel gear. The axes of rotation mustcross each other at a right-angle.

Number of Gear Teeth per Gear: 60Meshing Radius with Bevel Gear: 28mmOuter Diameter: 60.2mmheight: 15mmHole Diameter for Shaft: 4mm

ORDER CODE: AC835

REDUCERSPACK OF 10pcs

A pack that contains 10 red, plastic reducers.Often it is required to reduce the size of anaxial hole in a gear or pulley. It can be doneby plugging a reducer, which has a smallerhole size, into the over-sized hole. Eachreducer has a 2mm diameter hole and fitstightly into a 4mm diameter hole.Dimensions:Length of Fitting Part: 5.7mmOuter Diameter of Fitting Part: 4.1 - 4.15mmHole Diameter: 2mmSkirt Diameter: 7.3mmTotal Length: 8mmHint:This reducer fits onto the shaft of any of thefollowing DC permanent magnet motors:

Motor 1.5 to 3Vdc 10 000rpm: (AB214)Motor 2.4 to 6Vdc 11 400rpm: (AA902)

ORDER CODE: AC839

GREEN, RIGID, PLASTIC RODSPACK OF 50pcs

A pack that contains 50 green, rigid, hollow,plastic rods. These rods can be used to con-struct various structures, for example build-ing a model of a bridge, car’s frame, etc.Each rod can be used as a fixed shaft for allthe advertised pulleys, wheels and gearsthat have a shaft hole diameter of 4mm.Dimensions:Outer Diameter: 4 - 4.1mmHole Diameter: 2.1mmLength: 450mm

ORDER CODE: AC891

PULLEY PACKPACK OF 30pcs

A pack that contains 30 yellow, hard, plasticpulleys. Pulleys come in three different sizesand ten pulleys of each size is supplied.Three Pulley Sizes:29mm Pulley:

Outer Diameter: 28.8mmWidth: 8mmHole Diameter for Shaft: 4mmBelt-Contact Diameter of Pulley: 25mmMaximum Belt-Contact Width: 3mm

39mm Pulley:Outer Diameter: 38.6mmWidth: 8mmHole Diameter for Shaft: 4mmBelt-Contact Diameter of Pulley: 35mmMaximum Belt-Contact Width: 3mm

49mm Pulley:Outer Diameter: 48.7mmWidth: 8mmHole Diameter for Shaft: 4mmBelt-Contact Diameter of Pulley: 45.3mmMaximum Belt-Contact Width: 3mm

ORDER CODE: AC836

BLACK PULLEY BELT 10m

This is round, black, elastic, non-sticky, pul-ley belt that is sold in a length of 10 meters.It can be wound around the outer circumfer-ence of two or more pulleys.Dimensions:Diameter under Tension: 1.5mm minimumDiameter when Relaxed: 1.7mm maximum

ORDER CODE: AC893

48mm PLASTIC WHEELPACK OF 50pcs

A pack that contains 50 black, hard plastic,disc shaped wheels.Dimensions:Diameter: 47 - 48mmThickness: 5.5mmHole Diameter for Shaft: 4 - 4.2mm

ORDER CODE: AC841

06.2

69mm PLASTIC WHEELPACK OF 50pcs

A pack that contains 50 black, hard plastic,disc shaped wheels.Dimensions:Diameter: 68 - 69.5mmThickness: 5.5mmHole Diameter for Shaft: 4 - 4.1mm

ORDER CODE: AC842

36mm RUBBER WHEELPACK OF 50pcs

A pack that contains 50 black, firm rubber,realistic looking wheels.Dimensions:Diameter: 35.5 - 36mmWidth: 14.5mmHole Diameter for Shaft: 4 - 4.2mm

ORDER CODE: AC838

54mm RUBBER WHEELPACK OF 50pcs

A pack that contains 50 black, firm rubber,realistic looking wheels.Dimensions:Diameter: 53.5 - 54mmWidth: 20mmHole Diameter for Shaft: 4 - 4.2mm

ORDER CODE: AC837

NUTSAND BOLTS

MIXED PACK WITH SCREWSAND ACCESSORIES 250g

A mixed pack that contains screws andaccessories. Weight: approximately 250g.

ORDER CODE: AB633

STEEL

AD152 Hexagonal Nut M3

AD153 Flat Washer M3

AD154 Bolt M3x8mm Slotted Cheese Head

DISTANCE BOLTS

Note: These distance bolts orstand-offs are used for mountinga PCB onto a panel or inside anenclosure. Both ends have thesame, M3 (3mm) or M4 (4mm),screw thread.Female-to-female type has a

screw hole at each end.Male-to-female type has a bolt atone end and a screw hole at theopposite end.

METALFB134 female-female M3 L5 distance boltFB135 female-female M3 L10 distance boltFB136 female-female M3 L15 distance boltFB137 female-female M3 L20 distance boltFB138 female-female M3 L30 distance bolt

FB141 male-female M3 L5 distance boltFB142 male-female M3 L10 distance boltFB143 male-female M3 L15 distance boltFB144 male-female M3 L20 distance boltFB145 male-female M3 L30 distance boltFB146 male-female M3 L40 distance bolt

PVC PLASTICAC769 a packet that contains 20 pieces of

male-female M3 L10 distance bolts

AC770 a packet that contains 20 pieces ofmale-female M3 L15 distance bolts

AC771 a packet that contains 20 pieces ofmale-female M3 L20 distance bolts

SPACERS

Note: These are black, cylinder-shaped, plastic spacers.

AC767 Plastic Spacer length 5mm,inner dia. 3.5mm, outer dia. 7mm

AC768 Plastic Spacer length 10mm,inner dia. 4mm, outer dia. 7mm

ENCLOSURES

A range of enclosures specifical-ly manufactured for theElectronics industry.

STANDARD PLASTICENCLOSURES

Note: Manufactured from hi-impact styrene and ABS.Enclosures are supplied com-plete with lids and screws.Dimensions indicated for eachenclosure are the length, widthand height outer dimensions.

06.3

NON RIBBED

Note: The lid is lipped to ensuregood fit. The insides of the boxesare smooth.

GB583 black 85x35x18mmMB025 black 70x50x25mmMB027 white 70x50x25mmAC597 grey 85x56x30mmAA040 black 111x61x26mmAC490 matt black 112x62x26mmAA041 black 111x61x40mmPB200 black 130x70x44mmPB199 white 130x70x44mmRB014 black 105x105x50mmRB013 white 105x105x50mmSB039 black 150x90x55mmSB038 white 150x90x55mmEB548 grey 174x107x30mmAA042 black 174x107x30mmSB042 black 195x110x60mmSB037 white 195x110x60mm

RIBBED

Note: The lid is lipped to ensurea good fit. The insides of all theboxes have slotted walls (ribs) toaccept PCBs, etc.

MB028 black 85x56x30mmMB029 white 85x56x30mmPB125 black 130x70x44mmPB124 white 130x70x44mmSB026 black 105x105x50mmSB025 white 105x105x50mmSB028 black 150x90x55mmSB027 white 150x90x55mmSB030 black 195x110x60mmSB029 white 195x110x60mm

FLANGED PLASTICENCLOSURES

Note: Enclosures have ’ears’ tofacilitate easy wall mounting.Colour is black

AA034 74x54x37mmAA035 94x65x42mmAA036 114x74x52mmAA037 134x85x52mm

GB531 Enclosure Black,85x55x30mm

AA998 Ventilated Enclosure Black105x75x63mm

GB532 Enclosure cream coloured,99x59x26mm

Note: Enclosures have detach-able ’ears’ to facilitate easy wallmounting. Colour is black

GB530 104x74x46mmAA038 104x74x63mm

PLASTIC UTILITY /STORAGE ENCLOSURES

AA351 Modular Drawer Box with16 drawers, interlocking 4 sidesdimensions: 238x183x138mmdrawer inside: 120x50x33mm

SPECIALPLASTIC ENCLOSURES

Note: Auxiliary enclosures forspecific use in the Electronicsindustry.

Note: Key ring remote controlplastic enclosure

MB034 black 60x35x18mmMB033 white 60x35x18mm

AA044 Key pad enclosure black(for key pads MB077 / GB178)outer dimensions 76x57x18mm,46x57mm opening, 15mm deep

This black enclosure with clip-in battery lidfor battery compartment: 18 x 27 x 52mm(can take one 9V PP3 block battery)Other compartment: 75x77mm, 32mm deepOuter dimensions: 82x112mm, 39mm height

ORDER CODE: GB910

This black enclosure with clip-in battery lidfor battery compartment: 30 x 30 x 63mm(can take two 9V PP3 block batteries)Other compartment: 66x70mm, 33mm deepOuter dimensions: 72x121mm, 38mm height

ORDER CODE: AB077

This cream coloured remote control enclo-

06.4

sure with space for keyboard (no holes oropening yet made). Clip-in battery lid.Battery compartment: 17 x 28 x 52mm(can take one 9V PP3 block or two 1.5V AAbatteries)2 Spring and 2 end plates to make contactwith AA cells, 1 matching colour plastic face-plate and 1 red IR filter plate of the samesize are supplied.Other compartment: 81x65mm, 18mm deepOuter dimensions: 70x135mm, 25mm height

ORDER CODE: GB901

AB380 Enclosure for 3-pin plug toptransformer, black, dimensions:outer: 75x112mm,67mm heightinner: 62x78mm, 50mm height

AC491 Enclosure for transformer, whiteDimensions:outer: 65x94mm,69mm heightinner: 60x74mm, 46mm height

AC492 Enclosure for transformer, blackDimensions:outer: 92x130mm,70mm heightinner: 71x92mm, 48mm height

AA043 Power supply unit white

230x110x80mm

AA997 Enclosure plastic white120x114x42mm

GB582 Enclosure plastic white65 x 46 x 32mm withgrooved lid base for rubber seal

XB026 Sealed, white 210x132x150mmrubber seal and inner metal plate

SIMPLEXMETAL ENCLOSURES

Note: This range of boxes arechemically de-rusted, de-greasedand zinc-phosphated prior tobeing powder coated. Fixingscrews as well as rubber feet aresupplied. Boxes are constructedfrom 0.8mm and 1.0mm (22swg)mild steel.

Note: A simply constructed boxwith only 2 fixing holes. PCB canbe mounted on flanges in base.

AA590 Stock box 1 simplex51x76x102mm





SIMPLEX WITH VISORMETAL ENCLOSURES

Note: A simply constructed boxwith a visor effect in front for theprotection of instruments andpleasing visual effect.

AA595 Stock box 1 simplex visor60x80x100mm




ALL PURPOSEWITH VISOR

METAL ENCLOSURES

Note: This box has a visor effectand is very economical to assem-ble due to the base interlockingwith the cover and having onlytwo fixing screws.

AA602 Stock box 1 all purpose70x175x125mm




VENTILATEDMETAL ENCLOSURES

Note: The framed front givesyour instruments protection aswell as a pleasing visual effect.Ventilation is supplied in theform of slots on the sides andtop.

AA599 Stock box 1 purpose visor60x150x165mm


06.5


SPECIALMETAL ENCLOSURES

Note: Auxiliary enclosures eachwith a specific use.

FB828 Wall mount box 1, hinged,lockable door, 200x295x75mm

FB829 Wall mount box 2, hinged,lockable door, 285x285x88mm

06.6

BATTERIES ANDACCESSORIES

LEAD ACIDRECHARGEABLE

BATTERIES

Note: Lead acid rechargeablebatteries that are sealed. Ideallysuited for standby power foralarm systems.The non-spillablefeature of these batteries meansthat they can be operated in anyposition. Some care has to betaken while charging as thesebatteries are sealed and canexplode if recharged incorrectly.It is recommended that a stabi-lized, constant voltage sourceshould be used, with current lim-iting that is proportional to thebattery’s Ah (Amp x hour) rating.Car battery type chargers mustnever be used. The 6V batteriesare designed to be recharged ata constant voltage of 6.9Vdc and12V batteries are recharged at13.8Vdc.

FB870 6V 4.5Ah, height 101mmlength 70mm width 48mm

PB242 12V 1.2Ah, height 50mmlength 98mm width 45mm

EB266 12V 2Ah height 60mmlength 178mm width 34mm

FB868 12V 3Ah, height 60mmlength 134mm width 66mm

FB869 12V 5Ah, height 101mmlength 90mm width 70mm

RB008 12V 7Ah, height 94mmlength 151mm width 65mm

GB558 12V 17Ah, height 167mmlength 181mm width 76mm

GENERAL PURPOSEBATTERIES

Note: These are low cost zinc-carbon batteries. Not recharge-able.

AC586 Pack that contains 10 size AA 1.5V(1200mAh) cells

AC587 Pack that contains 2 size C 1.5V(3200mAh) cells

AC588 Pack that contains 2 size D 1.5V(8000mAh) cells

JB056 Battery size ’PP3’ 9V (400mAh)

07.1

COMPONENTS

Blister pack that contains one size ‘PP3’ 9Vblock battery: 1 x (JB056).

ORDER CODE: AB736

ALKALINE BATTERIES

Note: These are long-lastingalkaline batteries. Not recharge-able.

AC589 Pack that contains 4 alkalinesize AAA 1.5V (1100mAh) cells

AB748 Pack that contains 4 alkalinesize AA 1.5V (2600mAh) cells

AA976 Pack that contains 24 alkalinesize AA 1.5V (2600mAh) cells

AC590 Pack that contains 2 alkalinesize C 1.5V (7800mAh) cells

AC591 Pack that contains 2 alkalinesize D 1.5V (16500mAh) cells

GC317 4.5V Battery Alkaline flat,height 65.1mm, width 62,thickness 21.6mm (4400mAh)

EB160 9V Battery Alkaline size PP326.2x17.5x48.5mm (500mAh)

AD184 Pack that contains 10 Button Cells1.5V Cells of type AG3 / LR417.9x3.6mm (28mAh)

GB718 1.5V Button Cell AG13 / LR4411.6x5.5mm (125mAh)

AC592 Pack that contains 10 Button Cells1.5V Cells of type AG13 / LR4411.6x5.5mm (125mAh)

AC593 Pack that contains 2 alkalinesize N 1.5V (800mAh) cellscell dimensions: 29x11.5mm

GB729 6V Battery 4LR44 25x13mm(165mAh)

AC886 6V Battery made of 4 button cellsfor Remote Control Transmitters21x8mm (72mAh)

DB247 12V Battery alkaline (A23)for Remote Control Transmitters28.5x10.2mm (33mAh)

07.2

AB741 Pack that contains 1 alkaline(A23) 12V (38mAh) batterybattery dimensions: 28.5x10.3mm

ORDER CODE: AB741

LITHIUMBATTERIES

EB282 3V Disc Battery CR122012.5x2.0mm (35mAh)

AD251 Pack that contains 5 lithium3V Disc Batteries CR201620x1.6mm (85mAh)

AB018 3V Disc Battery CR203220x3.2mm (230mAh)

AC594 Pack that contains 5 lithium3V Disc Batteries CR203220x3.2mm (230mAh)

AC818 3V Disc Battery CR243024.5x3.0mm (280mAh)

AB520 3V Lithium Battery CR14250with axial connecting leads10.5g, 25.5x15mm (950mAh)

NICKEL CADMIUMRECHARGEABLE

BATTERIES

EB340 3.6V Battery pack 400mAhheight 31mm, length 43mm,width 14.5mm, weight 35gused in cordless telephones

AD230 Blister Pack that contains 2 Ni-Cdsize AAA 1.2V (300mAh) cells

EB267 7.2V Battery pack 2000mAhheight 47mm, length 135mm,width 25mm, weight 295g

NI-MH RECHARGEABLEBATTERIES

AA544 size AAA 1.2V 700mAhAA545 size AA 1.2V 1500mAh

AC595 Blister Pack that contains 2 Ni-MHsize AA 1.2V (2000mAh) cells

AC596 Blister Pack that contains 4 Ni-MHsize AA 1.2V (2300mAh) cells

GB518 size C 1.2V 4000mAhGB517 size D 1.2V 7000mAh

GB567 '9V' (actually 8.4V) 200mAh

AC898 PCB Mount 4.8V Battery pack143mAh, charge for 16hrs at 13mAheight 16mm, length 17.6mm,width 23mm, weight 24g

AB285 7.2V Battery pack 180mAhheight 20mm, length 34mm,width 21.5mm, weight 30gused in RC Helicopter (GB824)

07.3

BATTERY HOLDERS

AC808 PCB Mount Disc Battery Holderouter Ø24.2mm/ inner Ø20.4mmideal for 3V CR2032 (AB018)

AB499 PCB Mount Disc Battery Holderouter Ø28mm/ inner Ø25.5mmideal for 3V CR2430 (AC818)

GB681 1 x N cell 35x13x13mm(with solder tags)

GB731 2 x N cells 39x28x14mm(with leads)

GB721 1 x AAA cell 51x13x13mm(with solder tags)

GB722 4 x AAA cells 52x22x19mm(with solder tags)

EB893 1 x AA cell 55x15x13mm(with solder tags)

MB058 2 x AA cells 57x26x16mm

Blister pack that contains 2 Battery Holdersthat each take 2xAA size cells: 2 x (MB058).

ORDER CODE: AB735

AC998 3 x AA cells 48x57x15mm(with solder tags, flat mount)

GB426 3 x AA cells 48x57x15mm(flat mount)


MB081 4 x AA cells 60x57x15mm(flat mount)

AB500 4 x AA cells, lid, switch and leads(flat mount)

GB492 6 x AA cells 57x45x27mm


EB892 1 x C cell 60x29x25mm(with solder tags)

MB061 2 x C cells 61x56x24mm

QB054 4 x C cells 110x54x16mm

EB891 1 x D cell 70x35x26mm(with solder tags)

MB062 2 x D cells 71x71x32mm

QB053 4 x D cells 130x71x32mm

07.4

GB491 1 x 9V battery (with leads)

AB501 1x 9V battery, lid, switch and leads

JB038 Battery Clip for 9V PP3 Battery

Blister pack that contains 5 battery clips thatfit onto a 9V PP3 battery: 5 x (JB038).

ORDER CODE: AB732

BATTERY TERMINAL CLIP

This device is clipped on to 2 battery bladeterminals. It enables one to easily and neatlyconnect up to 4 wires to each battery termi-nal. It has two 7mm wide spade sockets withmidpoints spaced 46mm apart. Each spadesocket is connected to one 5mm wide bladeterminal and 3 pcb mounted screw terminals.

ORDER CODE: FB405

BATTERY CHARGERSAND ACCESSORIES

6.9VDC/1A 3 PIN 230VAC PLUG-INPOWER SUPPLY / CHARGER

This 6.9VDC regulated power supply plugsinto a 230VAC mains wall socket. It canserve as a 6V lead acid battery charger /trickle charger. It has a 1A current limiter thatprotects against destructive short circuitsand excessive current loading. It has a built-in transformer and a LED that indicateswhen the power supply is powered.

ORDER CODE: AC894

13.8VDC/1A 3 PIN 230VAC PLUG-INPOWER SUPPLY / CHARGER

This 13.8VDC regulated power supply plugsinto a 230VAC mains wall socket. It canserve as a 12V lead acid battery charger /trickle charger. It has a 1A current limiter thatprotects against destructive short circuitsand excessive current loading. It has a built-in transformer and a LED that indicateswhen the power supply is powered.

ORDER CODE: FB401

12V CAR BATTERY PROTECTOR

The battery protector prevents appliances(e.g. cool box) from draining the battery ofyour car. The device continuously monitorsyour car battery’s voltage and charge status.Specifications:Input Voltage: 12Vdc from the car’s batteryMaximum Operating Current: 10ARequired Input (battery) Voltage for the out-put load to be connected:

12.5V ± 0.3VInput (battery) Voltage for the output load tobe cutoff (disconnected):

11.2V ± 0.3VORDER CODE: AB407

UNIVERSAL NI-CD / NI-MHBATTERY CHARGER

Features:This battery charger is designed to onlyrecharge NiCd and NiMH: 1.2V AAA, AA, Cand D size cells and 9V ‘PP3’ block size bat-teries.Charges up to 4x AAA, AA, C or D cells at250mA each and 2x 9V block batteries at13mA each.Charging Time is switch selectable for 3, 6, 9or 24 hours as indicated on the chargingtimetable. LEDs indicate charging inprogress. When the pre-set time is reached,the charger will automatically switch to tricklecharge mode.Cell Tester is used to determine therechargeability and charge condition of AAA,AA, C or D cells.Discharge function is only used on NiCdAAA, AA, C and D cells.

ORDER CODE: EB162

LIGHTPRODUCTS

XENON STROBE LAMPS

AB418 20W Linear Xenon Strobe Lamp,70mm length, 3.6mm diameter

AB375 900W Linear Xenon Strobe Lamp,240mm length, 11mm diameter

STROBO TUBES S106A

The strobe is ideal for signal and timingapplications.Specifications:Min.anode voltage : 300VNom.anode voltage : 400VMmax.anode voltage : 600VTrigger voltage : 4kV min.Flash rate / min. : 6000 max.Voltage across prim. : 200VEnergy : 0.6mWsDimensions:a: 22mm; b: 32mm; c: 15mm; d: 6mm

ORDER CODE: FB097

07.5

STROBO TUBES S4030

The strobe is ideal for signal applications.Specifications:Min. anode voltage : 200V Nom. anode voltage : 330VMax. anode voltage : 400VTrigger voltage : 4kV min.fl/min. : 4 max.Life : 8000Ws : 20Anode voltage : 330Main capacitance : 360µFVoltage across prim. : 200VTrigger capacitor : 0.047µFEnergy : 0.9mWsDimensions:a: 12mm; b: 30mm; c: 15mm; d: 4mm

ORDER CODE: FB098

STROBO TUBES S4668

The strobe is ideal for signal and warningapplications.Specifications:Min. anode voltage : 250VNom. anode voltage : 400VMax. anode voltage : 500VTrigger voltage : 6kV min.fl/min. : 100 max.Life : 2 x 106Ws : 45Voltage across prim. : 200VEnergy : 0.8mWsDimensions:a: 32mm; b: 53mm; c: 40mm; d: 6mm

ORDER CODE: FB099

STROBO TUBES S6030

The strobe is ideal for signal applicationsSpecifications:Min. anode voltage : 200VNom. anode voltage : 330VMax. anode voltage : 400VTrigger voltage : 4KV min.fl/min. : 4 max.Life : 8000Ws : 25Anode voltage : 330Main capacitance : 460µFVoltage across prim. : 200VTrigger capacitor : 0.047µFEnergy : 0.9mWsDimensions:a: 19mm; b: 30mm; c: 15mm; d: 6mm

ORDER CODE: FB100

STROBO TUBES S6049

The strobe is ideal for signal applications.Specifications:Min. anode voltage : 260VNom. anode voltage : 330VMax. anode voltage : 400VTrigger voltage : 4kV min.fl/min. : 4 max.

Life : 8000Ws : 27Anode voltage : 330Main capacitance : 500µFVoltage across prim. : 200VTrigger capacitor : 0.047µFEnergy : 0.9mWsDimensions:a: 16mm; b: 49mm; c: 15mm; d: 6mm

ORDER CODE: FB101

STROBO TUBES S8538

The strobe is ideal for photographic applica-tions.Specifications:Min. anode voltage : 300VNnom. anode voltage : 400VMax. anode voltage : 600VTrigger voltage : 6kV min.fl/min : 6 max.Ws : 100Voltage across prim. : 200VEnergy : 0.8mWsDimensions:a: 25mm; b: 45mm; c: 15mm; d: 6mm

ORDER CODE: FB102

XENON U-STROBO TUBE

The strobe is ideal for signal and warningapplications.Specifications:Min. anode voltage : 250VNom. anode voltage : 400VMax. anode voltage : 500VMin. trigger voltage : 6kVMax. flash rate : 100 flashes / min.Max. energy / flash : 45WsWidth of device : 20mmLength excluding pins : 45mmLength of pins : 40mmDiameter of tube : 6mm

ORDER CODE: JB051

XENON U-STROBO TUBE U106

The strobe is ideal for signal and timingapplications.Specifications:Min. anode voltage : 300VNom. anode voltage : 400VMax. anode voltage : 600VMin. trigger voltage : 4kVMax. flash rate : 6000 flashes / min.Max. energy / flash : 4WsWidth of device : 22mmLength excluding pins : 36mmLength of pins : 15mmDiameter of tube : 6mm

ORDER CODE: GB326

STROBO TUBES STC150

The strobe is ideal for signal applications.Specifications:Min. anode voltage : 300VNom. anode voltage : 450VMax. anode voltage : 500VTrigger voltage : 6KV min.fl/min : 60 max.Life : 4 x 106Ws : 120Anode voltage : 450Main capacitance : 240µFVoltage across prim. : 240V

ORDER CODE: FB103

STROBE LAMP 50W

Power Rating: 50 WattDimensions: 50mm x 23mm diameter

ORDER CODE: GB726

FLUORESCENT LAMPS

EB168 white fluorescent tube 2Ft (60cm)

COLD-CATHODEFLUORESCENT LAMPS

Note: These are cold-cathode flu-orescent lamps that are ideal fordecorative lighting. Lamps areavailable in 100mm and 300mmlengths and different colours.The lamps and their power sup-plies are sold separately.Specifications:Tube Voltage: 180 - 800VAverage Brightness: 15 000cd/m²Average Life: 15 000 hoursLamp Diameter: 4mm

07.6

100MM LENGTHCOLD-CATHODE LAMPS

AB384 Blue Cold-Cathode Lamp 100mmAC598 Green Cold-Cathode Lamp 100mm

300MM LENGTHCOLD-CATHODE LAMPS

AC359 Blue Cold-Cathode Lamp 300mmAC360 Green Cold-Cathode Lamp 300mmAC361 Pink Cold-Cathode Lamp 300mmAD243 White Cold-Cathode Lamp 300mm

POWER SUPPLIESFOR COLD-CATHODE

FLUORESCENT LAMPS 12VDC

Note: These power supplies arespecially made for use with thecold-cathode, fluorescent lamps.In order to prevent power supplydamage, only use cold-cathodelamps of the correct size.Specifications:Maximum Supply Voltage: 12VdcSupply Current: ±375mAOutput Voltage: 180 - 800VDimensions:61 x 21mm, 15mm height

AB385 Power Supply for Cold-Cathodelamps that have 100mm length

AC389 Power Supply for Cold-Cathodelamps that have 300mm length

ULTRAVIOLETBLACKLIGHTS

GB710 UV Light Tube 1Ft (30cm) 8WEB169 UV Light Tube 2Ft (60cm) 20WEB170 UV Light Tube 4Ft (120cm) 40W

UV BLACKLIGHT TUBEIN HOUSING 12VDC

Specifications:Supply Voltage: 8x1.5V AA cells or 12VdcLampholder: 12 inch (30cm) 8W, UV TubePower Cord: 3m long with a cigarettelighterplug connected at its endDimensions: 318mm long

ORDER CODE: GB709

BLACKLIGHT BULB 160W/230V

Specifications:Power Rating: 160W / 230VacLampholders: (EB276) or (GB708)

Internal Gas: Mercury vapourDimensions: 170 x 75(Ø)mmIt emits ultraviolet radiation for exposing pre-sensitized PCBs like (AC983)Please Note: To extend the life of the lampone should cool it with a fan when in use.

ORDER CODE: GB494

NEON LAMPS /INDICATORS

AA961 Neon Lamp 220Vac (16x52mm),14mm screw-thread

JB137 Neon Lamp, wire-ended, 16mmx6mm dia., operates on 240Vacusing a 330k Ohm series resistor

Note: Panel Mount Indicator witha built-in lamp. The front issquare 11.5x11.5mm, 38mm long.Use 10.2mm diameter panel hole

AMBERAD082 12V Panel LampGB689 220V Panel Lamp

GREENAD083 12V Panel LampGB690 220V Panel Lamp

REDAD084 12V Panel LampGB691 220V Panel Lamp

Note: Panel Mount Indicator witha built-in 12V lamp. The front isround 13mm diameter, 32mmlong. Use 10.2mm diameter panelhole. Power lead length: 130mm

AD234 Amber 12V Panel LampAD235 Blue 12V Panel LampAD236 Red 12V Panel LampAD237 Green 12V Panel LampAD238 Clear 12V Panel Lamp

15mA INDICATOR LED 4 - 30VDC

This indicator LED (light emitting diode)circuit will operate with almost constantbrightness on voltages: 4 - 30Vdc / 15mA

ORDER CODE: GB764

SPOTLIGHTS ANDCOLOURED LAMPS

AB070 Halogen Lamp 150W / 230Vac57.5 x 18.5mm diameter

EB215 PAR 38 Spotlight 150W / 230Vac

AA978 Disco Bulb Blue 60W / 240VacAA979 Disco Bulb Green 60W / 240VacAA977 Disco Bulb Red 60W / 240VacAA980 Disco Bulb Yellow 60W / 240Vac

FILAMENT LAMPS

Note: Mini Torch Lamps that arewire-ended

GB663 1.2V / 300mA, 8mmx3.5mm dia.AC863 Blister pack that contains 4 lamps:

1.2V / 300mA, 8mmx3.5mm dia.

GB697 2.4V / 300mA, 12mmx5mm dia.GB668 6V / 80mA, 10mmx3.15mm dia.GB669 12V / 60mA, 10mmx3.15mm dia.

AA265 Mini Lamp 3W / 220Vacbayonet fitting

EB175 Reverse Stop Indicator Lamp12V / 21W

EB176 Front Park Light Lamp 12V

07.7

GROUP

Note: Mini-lamps 10x28mm bayo-net fitting

AA015 6V / 3WAA016 12V / 3W

GROUP

Note: Mini-lamps 10x28mm screwfitting

GB151 2.5V / 0.75WGB152 3.8V / 1.2WGB196 4.8V / 2.4WAA013 6V / 2WFB076 12V / 3WAA014 24V / 2W

Blister pack that contains 5 mini lamps 2.5Vscrew fitting: 5 x (GB151).

ORDER CODE: AB734

LAMPHOLDERS ANDREFLECTORS

LAMP HOLDERS

EB177 Brass Flanges / Base Plate10mm screw-thread

EB311 Lampholder Brass Bayonet15mm inner dia. fits (EB177)

EB178 Lampholder Brass Bayonet22mm inner dia. fits (EB177)

EB180 Lampholder Nylon Bayonet22mm inner dia. fits (EB177)

EB179 Lampholder Brass Bayonet22mm inner dia., base 46mm dia.

EB276 Lampholder Porcelain EdisonScrew in Fitting, M3 fixing holes

LAMPHOLDER WITH ARMATUREFOR 1 SCREW IN BULB 160W/230V

Specifications:Power Rating: max. 160W / 230VacLampholder: Single Edison Screw in FittingDimensions: 400 x 210 x 130mmWeight: 3.4kg

ORDER CODE: GB708

AA266 Mini Lamp Holder Screw inFitting for 10mm lamps

AB174 Mini Lamp Holder Screw inFitting for 10mm lamps,black, round plastic base with two3.5(Ø)mm mounting screw holes

Blister pack that contains 2 mini lamp hold-ers for 10mm screw-in lamps: 2 x (AB174).

ORDER CODE: AB733

REFLECTORS

REFLECTOR PAR56

Reflector for PAR56 fitting with ceramic con-nector and socket GY9.5. Dimensions : 90 x 178(Ø)mm

ORDER CODE: FB106

REFLECTOR PAR64

Reflector for PAR64 fitting with ceramic con-nector and socket GY9.5. Dimensions : 103 x 202(Ø)mm

ORDER CODE: FB107

MIRROR BALL

This Mirror ball is ideal for disco,has a 30cm diameter and weighs 2.12kg

ORDER CODE: AB155

07.8

LIGHT EFFECT /DISPLAY DEVICES

SMOKE MACHINE 500 WATT

This machine is ideal for creating thicksmoke on stages, in theatres, etc.It uses the special smoke liquid, (AB764), tomake smoke. It has a remote control withon/off switch. This machine has to becleaned with the cleaning liquid (AD053).Specifications:Power Supply: 230VacPower Consumption: 550W max.Tank Capacity: 0.95 litreWarm-up Time: 5 - 8 minutesOutput Smoke Volume Rate: 55m³ / min.Dimensions: 280 x 170 x 140mmWeight: 2kg

ORDER CODE: AD052

STANDARD SMOKE LIQUID 5L

This is standard smoke liquid that should beused with proper smoke or fog machines.Contains five litres of smoke liquid.

ORDER CODE: AB764

SMOKE MACHINE CLEANING LIQUID250mL

This is the cleaning liquid for the smokemachine (AD052). It must be used periodi-cally to clean the interior of the smokemachine. It works perfectly with the low pricemachines as well as with the professionalmachines for shows. It is not dangerous andconforms to strict international standards.Contains 0.25 litres of cleaning liquid.

ORDER CODE: AD053

MINI, BRIGHT,FLASHING NECKLACE

Note: A brightly flashing LED isused to attract attention.Available in 4 different colours.Power Supply:

3 x 1.5V AG3 button cells

GB815 BlueGB816 GreenGB817 RedGB818 Yellow

ROPE LIGHTS1 CHANNEL 9M

These are single-channel, waterproof, flexi-ble rope lights. Used for decorative lighting.Bendable to any shape. For outdoor / indooruse.Specifications:Power Supply: 230Vac / 50 HzPower Rating: 150 Watt (16.5W per meter)Total Lenght: 9mDiameter: 13mmBulb Specifications:Power: 6.5V / 70mA / 0.45W eachOperating Time: 20 000 hoursBulb Spacing: 2.8cm interval, 36 bulbs / m

GC230 BlueGC231 ClearGC232 YellowGC233 RedAC809 Green

YELLOW ROPE LIGHT2 CHANNELS 8M

This is a 2-channel, waterproof, flexible ropelight. Used for decorative lighting. Bendableto any shape. For outdoor / indoor use. Acontrol box with 8 programs is supplied.Specifications:Power Supply: 230Vac / 50 HzPower Rating: 150 Watt (16.5W per meter)Colour: YellowTotal Lenght: 8mDiameter: 13mmBulb Specifications:Power: 6.5V / 70mA / 0.45W eachOperating Time: 20 000 hoursBulb Spacing: 2.8cm interval, 36 bulbs / m

ORDER CODE: GC238

YELLOW ROPE LIGHT2 CHANNELS 8M

This is a 2-channel rope light with red, blue,green and yellow lights that flash accordingto 1 of 8 flashing programmes. Flashing iscontrolled by a built-in control box. Used fordecorative lighting. Flexible tubing. It mayonly be used indoors.Specifications:Power Supply: 230Vac / 50 HzPower Rating: 150 Watt (16.5W per meter)Colour: clear plastic with lights that shine

red, blue, green and yellowTotal Lenght: 8mDiameter: 13mmBulb Specifications:Power: 6.5V / 70mA / 0.45W eachOperating Time: 20 000 hoursBulb Spacing: 2.8cm interval, 36 bulbs / m

ORDER CODE: AC810

CHRISTMAS LIGHTS

This is a christmas tree decorative lightstring. It has low-voltage, micro lamps. Itmakes use of a low-voltage transformer. Foroutdoor / indoor use. A control box with 8programs is supplied.Specifications:Power Supply: 24Vdc from 230Vac adapter

(is included)Lamps: 160 lamps in totalLight String Length: 8mPower Cord Lenghth: 9mControl Box Programs:

combination, wave, sequence, slow glow,chase, slow fade, twinkle and steady on

GC248 4 Different Colours, 8mGC249 White, 8m

DISCO LIGHT KIT 230VAC

This disco light set consists of:

07.9

Pin Spotlight with 30W / 6.4V lamp and built-in lamp power supply 230Vac5 colour wheel with a motor 2rpm 230VacMirror ball with 20cm diameter, 0.9kgMotor rotates the mirror ball 3rpm, 230Vac

ORDER CODE: AB004

DOUBLE ROCK BALL LIGHTS300W / 230VAC

This double rock ball is used to createcolourful rotating light effects. Two 34 lens,composite light globes rotate at each end ofa rotating base.Constant speed rotationLight spots in 6 coloursPower supply: 230VacDimensions: 450 x 190 x 310mmWeight: 4.7kgRequired (not included): 2 Halogen lamps150W / 230Vac - 2 x (AB070)

ORDER CODE: AB005

SUPERLASER PATTERN-MAKER

This device contains a red laser of 4.9mW,that projects 16 pre-programmed geometricpatterns. Compact, affordable laser that isperfect for the creation of laser light effects.It has 3 operating modes: cycles throughpatterns automatically, music-controlled ormanual operationSpecifications:Power supply: 9Vdc / 0.3A (adapter is incl.)Dimensions: 200 x 220 x 60mmWeight: 0.36kg

ORDER CODE: AB148

CABLES ANDACCESSORIES

PANEL FLEX

0.20 SQ MM 1.4A 100V

AA376 Black cable sold per meterSB010 Black cable sold in a roll of 100m

AA368 Blue cable sold per meterSB015 Blue cable sold in a roll of 100m

AA369 Brown cable sold per meterSB018 Brown cable sold in a roll of 100m

AA370 Green cable sold per meterSB011 Green cable sold in a roll of 100m

AA371 Grey cable sold per meterSB013 Grey cable sold in a roll of 100m

AA372 Orange cable sold per meterSB019 Orange cable sold in a roll of 100m

AA377 Red cable sold per meterSB014 Red cable sold in a roll of 100m

AA373 Violet cable sold per meterSB016 Violet cable sold in a roll of 100m

AA374 White cable sold per meterSB012 White cable sold in a roll of 100m

AA375 Yellow cable sold per meterSB017 Yellow cable sold in a roll of 100m

AA490 0.2mm² Multi Stranded Wire2m of each of the 10 colour wires

0.50 SQ MM 3A 300V

AA702 Black cable sold per meterAA699 Black cable sold in a roll of 100m

AD231 Blue cable sold per meterAD232 Blue cable sold in a roll of 100m

AA701 Red cable sold per meterAA700 Red cable sold in a roll of 100m

AB614 Violet cable sold per meterAB615 Violet cable sold in a roll of 100m

RIPCORD / TWIN FLEX

0.2 SQ MM 1.4A 40VAB511 Brown cable sold per meter

AB566 Brown cable sold in a roll of 100m

AB512 White cable sold per meterAB567 White cable sold in a roll of 100m

0.4 SQ MM 2.5A 40VAA497 White cable sold per meterSB035 White cable sold in a roll of 100m

0.5 SQ MM 3A 300VAA773 Black cable sold per meterAA774 Black cable sold in a roll of 100m

AA498 White cable sold per meterTB022 White cable sold in a roll of 100m

1.0 SQ MM 10A 300VAB689 White cable sold per meterAB690 White cable sold in a roll of 100m

LOUDSPEAKER CABLE

STANDARDLOUDSPEAKER CABLE

0.5 SQ MMAB616 Red/Black cable sold per meterAB617 Red/Black cable sold in roll of 100m

1.5 SQ MMFB125 Red/Black cable sold per meterAB568 Red/Black cable sold in roll of 100m



O.F.C. LOUDSPEAKER CABLE

1.5 SQ MMColour: transparent PVCSize: 2 x 1.50mm²Inner conductor: 0.1mm x 189Outside Ø: 2.85mm x 2

ORDER CODE: FB130100M ROLE ORDER CODE: AB571





07.10

POWER CABLE

POWER CABLE CABTYRE

0.5 SQ MM 3A 300VAA491 White cable sold per meterTB021 White cable sold in a roll of 100m

FB492 Black cable sold per meterAB574 Black cable sold in a roll of 100m

0.75 SQ MM 6A 300VAA769 White cable sold per meterAB575 White cable sold in a roll of 100m

1.0 SQ MM 10A 300VAA770 White cable sold per meterAB576 White cable sold in a roll of 100m

POWER CABLE HOUSE WIRE

Note: PVC insulated, 7-strandcopper wire. The earth wire is notinsulated. Suitable for housewiring and heavy currents.

EB166 Black 2.5mm² 25A 600V cablesold per meter

AB577 Black 2.5mm² 25A 600V cablesold in a roll of 100m

EB165 Red 2.5mm² 25A 600V cablesold per meter

AB578 Red 2.5mm² 25A 600V cablesold in a roll of 100m

AA971 Uncoated Copper Wire 1.5mm²(7 strands) cable sold per meter

AB579 5kg Uncoated Copper Earth Wire1.5mm² (7 strands)sold in a roll of 200m

SIGNAL / BURGLARALARM CABLE

SOLID CORECOMMUNICATION CABLE

Note: These cables are ideal foralarm systems and light currentapplications. The outer sheath iswhite PVC, with coloured PVCinsulated 0.5mm tinned solidcopper cores.AA506 4 core brown cable sold per meterSB036 4 core brown sold in a roll of 100m

AA505 4 core white cable sold per meter

TB004 4 core white sold in a roll of 100m

AA507 6 core white cable sold per meterXB004 6 core white sold in a roll of 100m





AA512 30 core white cable sold per meterAA178 30 core white sold in a roll of 100m

AC854 0.2mm² Solid Core Wire,PVC insulated, tinned copper core,10m black and 10m red,5m of each of the following colours:blue, brown, green, grey, orange,violet, white and yellow

FLEXIBLE, FLAT, 4 CORECOMMUNICATION CABLE

Note: This is 4 core, multi strand-ed, flat, white, PVC, telephonecable.GB727 4 core cable sold per meterAB580 4 core cable sold in a roll of 100m

FLEXIBLE, FLAT, 8 CORECOMMUNICATION CABLE

Note: This is 8 core, multi strand-ed, flat, white, PVC, telephonecable.AB422 8 core cable sold per meterAB581 8 core cable sold in a roll of 100m

MULTI STRANDED, ROUNDCOMMUNICATION CABLE

EB301 4 Core White Foil Screened Cable

sold per meterAB582 4 Core White Foil Screened Cable

sold in a roll of 100m

AA771 4 Core White Cable sold per meterAB583 4 Core White sold in a roll of 100m

AA772 6 Core White Cable sold per meterAB584 6 Core White sold in a roll of 100m

AB693 12 Core White Cable sold per meterAB692 12 Core White sold in a roll of 100m

CATEGORY 5ELAN DATA CABLE

AA606 4 twisted pair, multi stranded,LAN cat5E cablesold per meter

AB585 4 twisted pair, multi stranded,LAN cat5E cablesold in a roll of 100m

AA500 4 twisted pair, solid core,LAN cat5E cablesold per meter

AB586 4 twisted pair, solid core,LAN cat5E cablesold in a roll of 100m

GB733 4 twisted pair, solid core,braid-foil screened, LAN cat5Ecable sold per meter

AB587 4 twisted pair, solid core,braid-foil screened, LAN cat5Ecable sold in a roll of 100m

RIBBON CABLE

Note: Suitable for internal wiringof computers, office equipmentand a variety of modern electron-ic equipment. The pitch betweenconductors is 1.27mm.

GREY COLOUR

GROUP

NB001 10 way cable sold per meterAB588 10 way cable sold in a roll of 30m


NB011 20 way cable sold per meterAB590 20way cable sold in a roll of 30m




NB031 50 way cable sold per meter

07.11

AB594 50 way cable sold in a roll of 30m


MULTI COLOUR

GROUP

GB179 10 way cable sold per meterAB657 10 way cable sold in a roll of 30m

GB205 16 way cable sold per meterAB658 16 way cable sold in a roll of 30m

AB629 34 way cable sold per meterAB659 34 way cable sold in a roll of 30m

SCREENED AUDIOCOAXIAL CABLE

EB879 Black Mono Microphone Cable,Multi Stranded, 5.8mm outer dia.sold per meter

AB596 Black Mono Microphone Cable,Multi Stranded, 5.8mm outer dia.sold in a roll of 100m

AA394 Grey Mono Audio Signal Cable,Multi Stranded, 1.7mm outer dia.sold per meter

AB597 Grey Mono Audio Signal Cable,Multi Stranded, 1.7mm outer dia.sold in a roll of 100m

AA437 Black Stereo Microphone Cable,Multi Stranded, 5.8mm outer dia.sold per meter

AB598 Black Stereo Microphone Cable,Multi Stranded, 5.8mm outer dia.sold in a roll of 100m

EB878 Black Stereo, Twin Screened Cable,Multi Stranded 2 x 2.6mm outer dia.sold per meter

AB599 Black Stereo, Twin Screened Cable,Multi Stranded 2 x 2.6mm outer dia.sold in a roll of 100m

COAXIAL CABLE

AA393 Black RG58 Co-ax Cable, 50 Ohm5mm outer diametersold per meter

RB019 Black RG58 Co-ax Cable, 50 Ohm5mm outer diametersold in a roll of 100m

AA962 Black RG59 Co-ax Cable, 75 Ohm6mm outer diametersold per meter

AB600 Black RG59 Co-ax Cable, 75 Ohm6mm outer diametersold in a roll of 100m

EB156 White TV Co-ax Cable, 75 Ohm6.5mm outer diametersold per meter

AB601 White TV Co-ax Cable, 75 Ohm6.5mm outer diametersold in a roll of 100m

FIBRE OPTIC CABLE

GB249 Fibre Optic Cable, 1mm diameterplastic core, sold per meter

ENAMEL INSULATEDCOPPER WIRE

Note: Enamel insulated copperwire for transformers, electro-magnets and electric motors.Caution: Do not inhale toxicfumes while removing enamelfrom the wire with a solderingiron. Always solder in a well ven-tilated area. Supplied in rolls of250g

FB726 0.15mm SWG38, 1470m, 26mAAA032 0.56mm SWG25, 137m, 304mAMB126 0.8mm SWG21, 53m, 779mA

Note: Enamel insulated copperwire that is supplied in packets.

AC864 Wire Dia. 0.1mm, Length: 140mAC584 Wire Dia. 0.2mm, Length: 115mAC865 Wire Dia. 0.3mm, Length: 55mAC866 Wire Dia. 0.4mm, Length: 23mAC867 Wire Dia. 0.5mm, Length: 23mAC868 Wire Dia. 0.6mm, Length: 16mAC869 Wire Dia. 0.7mm, Length: 12mAC870 Wire Dia. 0.8mm, Length: 10mAC871 Wire Dia. 1.0mm, Length: 6mAC872 Wire Dia. 1.2mm, Length: 6mAC873 Wire Dia. 1.5mm, Length: 4m

TINNED COPPER WIRE

Note: Tinned solid copper wirethat is supplied in packets. Thiswire does not have any electricalinsulation on the surface. It isideal for making PCB jumpers(wire links) and for repairingcracked PCB tracks.

AC874 Wire Dia. 0.6mm, Length: 10mAC875 Wire Dia. 0.8mm, Length: 7mAC876 Wire Dia. 1.0mm, Length: 5mAC877 Wire Dia. 1.2mm, Length: 3mAC878 Wire Dia. 1.5mm, Length: 2mAC879 Wire Dia. 2.0mm, Length: 0.8m

RESISTANCE WIRE

Note: It is ideal for making wire-wound resistors that have stableresistance over a wide tempera-ture range. It is made ofConstantan: a 55% copper and45% nickel alloy. Supplied in 5meter lengths.

AA608 30 Ohm per meter, 0.18mm dia.AA609 44 Ohm per meter, 0.16mm dia.AC001 60 Ohm per meter, 0.13mm dia.

07.12

AA612 62 Ohm per meter, 0.12mm dia.

HEAT SHRINK TUBING

INSULATING PLASTIC TUBES

AB630

A mixed pack that contains a range of insu-lating plastic tubes. Diameters ranging from2 to 8mm. Please note that the pack con-tains heat shrink tubing but also plain insu-lating tubing that will not shrink when heated.

ORDER CODE: AB630

Note: The maximum shrinkagewhen heated. is 50%. Supplied in1 meter lengths. The indicateddiameter is before shrinkage.

EB886 Black 1.6mm diameterAA001 Black 2.4mm diameterAA002 Black 3.2mm diameterAA003 Black 4.8mm diameterAC915 Clear 6.4mm diameterAA004 Black 6.4mm diameterAC914 Clear 9.5mm diameterAA005 Black 9.5mm diameterAC913 Clear 12.7mm diameterEB887 Black 19mm diameterEB888 Black 25.4mm diameter

CABLE CLIPS

EB197 Flat 5mmEB201 Round 4mm

CABLE TIES

Note: These are packets of non-release, nylon cable ties. A cabletie can be used to bind cablestogether or fasten it to objects.

BLACK COLOURAB660 a packet consisting of 100 pieces of

75 x 2.5mm cable tiesAB661 a packet consisting of 100 pieces of



200 x 5mm cable tiesAB664 a packet consisting of 100 pieces of








540 x 13mm cable ties

WHITE COLOURAB672 a packet consisting of 100 pieces of










500 x 7.9mm cable ties

ADHESIVEMOUNTING BLOCKS

Note: These are mounting blockswith a self-adhesive area that canbe stuck onto a clean, flat sur-face.

AB994 a packet containing 10 pieces ofMounting Blocks for cable tiescable tie widths: 2.0 to 4.8mmAdhesive Dimensions: 28 x 28mm(cable ties are not included)

SPIRAL CABLE WRAPPING

Note: These are spiral shapedcable wraps that are made ofpolythene. Spiral wrap is used togroup cables together. Spiralwrap can be expanded up to fourtimes in diameter. Cables can betaken through it at the ends andbetween adjacent spiral turns.The outer diameter / Inner diame-ter is indicated for spiral wrapthat is not expanded.

AB430 outside Ø: 6mm / inside Ø: 4mm,transparent white spiral wrapsold per meter

AB602 outside Ø: 6mm / inside Ø: 4mm,transparent white spiral wrapsold in 10m length

AB431 outside Ø: 10mm / inside Ø: 7.5mm,transparent white spiral wrapsold per meter

AB603 outside Ø: 10mm / inside Ø: 7.5mm,transparent white spiral wrapsold in 10m length

AB432 outside Ø: 15mm / inside Ø: 12mm,transparent white spiral wrapsold per meter

AB604 outside Ø: 15mm / inside Ø: 12mm,transparent white spiral wrapsold in 10m length

EMI FILTERCABLE CLAMPS

Note: These are ferrite coresdesigned to reduce induced or

07.13

radiated electromagnetic interfer-ence (EMI) in mains, data andsignal cables. The ferrite halvesare mounted in a hinged nylonhousing that clamps around acable.

AB428 Clamp Filter for 4mm dia. cableAB260 Clamp Filter for 7.5mm dia. cable

CONNECTORSAND SOCKETS

CONNECTORS 100pcs

AB646

A mixed pack that contains 100 connectors.ORDER CODE: AB646

IC SOCKETS

IC SOCKETS 30pcs

AB651

A mixed pack that contains 30 IC sockets.ORDER CODE: AB651

IC ZIF SOCKETS

BB007 40 pin Aries Universal ZIF Socket

IC SOCKETS WIRE WRAP

AA585 Wire wrap pin 15mm

STANDARD IC SOCKETSNote: Standard IC socket for dualin line package (DIP / DIL) with apin spacing of 0.1 inches(2.54mm). Contact resistance:0.03 Ohm. Current rating: 1A

0.3 INCH DUAL IN LINE

JB007 6 pin JB012 20 pin

JB008 8 pin JB140 22 pinJB009 14 pin JB013 24 pinJB010 16 pin GB354 28 pinJB011 18 pin


JB014 24 pin JB141 32 pinJB015 28 pin JB016 40 pin

IC SOCKETS ROUND PINNote: Round pin high quality ICsocket with a pin spacing of 0.1inches (2.54mm).


JB001 6 pin JB005 18 pinJB002 8 pin JB006 20 pinJB003 14 pin JB143 24 pinJB004 16 pin GB529 28 pin


JB144 24 pin JB146 32 pinJB145 28 pin JB147 40 pin

SINGLE ROW

DB557 20 pinDB558 32 pinAB338 40 pinMB139 64 pin

AUDIOJACK CONNECTORS

AUDIO 2.5MM CONNECTORS

AA735 Black Insulated Mono 2.5mmPlug

EB326 Black Insulated Stereo 2.5mmPlug

EB327 In-Line Mono 2.5mm Socket

Black Insulated

AA725 Panel Mount Mono 2.5mmSocket

AUDIO 3.5MM CONNECTORSNote: These connectors are suit-able for mono and stereo appli-cations. The wires can be sol-dered to the plug.

DB306 Black Insulated Mono 3.5mmPlug

DB307 Black Insulated Stereo 3.5mmPlug

AD006 Black Insulated 4-Pole Stereo3.5mm Plug

AB435 RF shielded 3.5mm mono jack plug

AB436 RF shielded 3.5mm stereo jack plug

AA276 Inline Mono 3.5mm Socket Black

EB881 Inline Stereo 3.5mm SocketBlack

AC707 RF shielded in-line mono 3.5mmSocket

AC708 RF shielded in-line stereo 3.5mmSocket

DB236 Panel Mount Mono 3.5mmSocket

07.14

DB305 Panel Mount Stereo 3.5mm Socket

AUDIO 6.35MM CONNECTORSNote: These connectors are suit-able for mono and stereo appli-cations. The wires can be sol-dered to the plug.

MB121 Black Insulated Mono 6.35mmPlug

MB123 Black Insulated Stereo 6.35mmPlug

FB888 RF shielded mono 6.35mm plug

FB891 RF shielded stereo 6.35mm plug

Note: Mono 6.35mm PlugProfessional die-cast

FB766 black markingFB764 blue markingFB756 red marking

Note: Stereo 6.35mm PlugProfessional die-cast

FB757 red markingFB767 black marking

Note: Mono 6.35mm Plug, Gold-Plated, Spring cable guide

FB903 blue markingFB892 red marking

FB904 Gold-Plated, RF shielded, Stereo6.35mm Plug, red marking

AA277 RF shielded in-line mono 6.35mmsocket

AC709 RF shielded in-line stereo 6.35mmsocket

EB882 In-Line Stereo 6.35mm SocketBlack Insulated

MB122 Panel Mount Mono 6.35mmOpen Socket

MB124 Panel Mount Stereo 6.35mmOpen Socket

FB956 Panel/PCB Mount Mono 6.35mmSocket

FB935 Panel/PCB Mount Stereo6.35mm Socket

RCA PHONO / XLRCONNECTORS

Note: These connectors are suit-able for audio and video applica-tions. The wires can be solderedto the plug.

FB907 2 Panel Mounted RCA Sockets,52 x 20mm

EB321 4 Panel Mounted RCA Sockets,in-line, 75 x 25mm

FB906 4 Panel Mounted RCA Sockets,square, 52 x 36mm

AC805 RCA Socket PCB Mount

AC705 Gold-Plated RCA SocketBlack Marking, Panel Mount,8mm diameter panel hole

AC706 Gold-Plated RCA SocketRed Marking, Panel Mount,8mm diameter panel hole

Note: Panel Mount RCA Socket

HB305 Black HB303 RedFB910 YellowFB931 White

Note: In-Line RCA Socket

EB432 Black Insulated AA279 Blue InsulatedAA278 Green InsulatedEB433 Red Insulated

Note: Insulated RCA Plug

HB302 Red Insulated HB304 Black InsulatedFB752 White InsulatedFB751 Yellow Insulated

07.15

FB942 90° Black Insulated RCA Plugwith screw connection

Note: RF shielded RCA Sockets

AC701 Black markingAC702 Red markingAC703 Yellow marking

Note: RF shielded RCA Plugs

FB955 Black markingFB833 Red markingAC704 Yellow marking

EB884 Gold-Plated Audio Lead 5m 2 RCAPlugs to Stereo 3.5mm Plug

Note: Audio Lead with 2 RCAPlugs at each end.

AA063 1.2mEB550 2.5mEB551 5m

AB423 Audio Lead with 3 RCA plugs

at each end, 1.2m

AB424 Audio Lead with 4 RCA plugsat each end, 1.2m

AB389 3 Pin XLR Plug withsolder connections

AB388 In-line 3 pin XLR Socket withsolder connections

AB076 Panel Mount XLR Socketround panel hole: 23.5mm dia.

Dimensions: front 26 x 32mm,38mm deep,4 solder connections

ADAPTERS AUDIO JACK /XLR / RCA PHONO

EB867 Adapter Mono 3.5mm Plug to 2Mono 3.5mm Sockets

EB868 Adapter Mono 3.5mm Plug toRCA Socket

AC358 Adapter Mono 6.35mm Plug toRCA Socket

FB953 Adapter Mono 3.5mm Socket toMono 2.5mm Plug

EB871 Adapter Mono 6.35mm Plug to 2RCA Sockets

EB872 Adapter Mono 6.35mm Plug toMono 3.5mm Socket

AC710 Adapter Stereo 3.5mm Plug toStereo 6.35mm Socket

EB895 Adapter Mono 6.35mm Plug toStereo 6.35mm Socket

FB895 Adapter Mono 6.35mm Socket toMono 3.5mm Plug

GB832 Adapter Mono 6.35mm Socketto 3 pin XLR Socket

GB833 Adapter Stereo 6.35mm Socketto 3 pin XLR Socket

EB426 Adapter RCA Plug to 2 RCASockets

FB838 Adapter RCA Plug to F Socket

EB865 Adapter RCA Socket to 2 RCASockets

EB325 Adapter Stereo 3.5mm Plug to2 Stereo 3.5mm Sockets

EB870 Adapter Stereo 3.5mm Plug to 2RCA Sockets

07.16

EB873 Adapter Stereo 6.35mm Plug to2 Stereo 3.5mm Sockets

EB874 Adapter Stereo 6.35mm Plug to 2RCA Sockets

EB862 Adapter Stereo 6.35mm Plug toStereo 3.5mm Socket

FB936 Gold-plated AdapterStereo 6.35mm Plug toStereo 3.5mm Socket

AD106 RF shielded ConnectorRCA Plug to RCA Plug

EB429 Connector RCA Socket to RCASocket

RJ10, RJ11, RJ12, RJ45CONNECTORS

EB316 Protea Telephone Plug

EB317 Protea Telephone Socket

EB319 RJ9 / RJ10 (4P4C) crimp on plug4 pin 4 way, 7.62mm wide

AA969 RJ11 crimp on plug 4 pin 6 way9.65mm wide

GB720 RJ12 crimp on plug 6 pin 6 way9.65mm wide

AA520 RJ45 crimp on plug 8 pin 8 way11.68mm wide

Note: These soft, plastic boots(covering caps) are used tocolour code the ends of RJ45network cables. Each boot mustbe mounted onto the cable endof a RJ45 plug just before crimp-ing it onto the cable.

AD254 BlackAD255 GreyAD256 RedAD257 YellowAD258 GreenAD259 BlueAD260 BeigeAD261 White

AB460 RJ10 PCB Mount Socket (4P4C)for telephone handset connections

GB278 RJ11 PCB Mount Socket (6P4C)for telephone cable connections

AB461 RJ12 PCB Mount Socket (6P6C)for telephone cable connections

AB293 RJ45 PCB Mount Socket (8P8C)for computer network connections

AA970 RJ11 wall mount socket

AB382 RJ12 wall mount socket

AA515 RJ45 wall mount socket

Note: Venus Lead RJ11 Plug toRJ11 Plug

GB392 2mGB393 5mGB394 7.5mEB167 10mGB395 15mGB396 20mGB397 30m

GB385 Adapter Protea Socket to RJ11Plug

GB384 Adapter RJ11 Socket to ProteaPlug

GB388 Connector RJ11 Socket to RJ11Socket

GB389 Phone Twist Hinge ConnecterRJ10 Socket to RJ10 Plug

GB398 Protea Lead Protea Socket toProtea Plug, 10m

GB383 Splitter RJ11 Plug to 3 RJ11Sockets

07.17

GB399 Splitter RJ11 Plug to 5 RJ11Sockets

GB382 T Adapter RJ11 Plug to 2 RJ11Sockets

GB391 Venus Lead RJ11 Plug to 2 RJ11Sockets, 5m

AB383 Telephone ADSL / Phone Splitter

Note: Spiral Cord with identicalRJ-type plugs at each end of thecable.

GB386 RJ10 (4P4C) Plug at each end 3mGB387 RJ10 (4P4C) Plug at each end 5mAB462 RJ12 (6P6C) Plug at each end 4m

BANANA CONNECTORS

Note: The wire is connected tothe plug by tightening a screw orsoldering. The socket can bemounted onto a panel.

FB884 2 Panel Mounted 4mm BananaBinding Posts

CONTACT-PROTECTED,INJECTION-MOULDED

MEASURING LEAD

This injection-moulded measuring lead has a

4mm, banana type, safety plug at each end.Nickel-plated copper beryllium contactspring. The cable has integrated kink protec-tion made of highly flexible stranded leadwith double insulation. Coloured blue. Lengthis 250mm. Rated current is 16A. Rated volt-age is 1000V (IEC-1010).

ORDER CODE: GB717

Note: 4mm panel mount bananasocket

JB043 BlackJB054 RedGB994 Yellow

Note: 4mm Banana binding post20A

EB422 BlackEB423 Red

Note: 4mm Banana plug, screwconnection

JB042 BlackJB053 RedFB323 YellowFB324 BlueEB322 Green

Note: 4mm Banana plug 30A, sol-der connection

AB454 BlackAB455 RedAB456 Yellow

Note: In-line socket for 4mmBanana plug 16A, solder connec-tion for wire.

AB457 BlackAB458 RedAB459 Yellow

Note: Adapter 2mm plug to 4mmbanana socket

FB834 BlackFB950 Red

BANANA PLUGCONNECTING CABLES 3A

Note: These cables have a 4mmbanana plug moulded onto eachend. Very flexible PVC coatedcable is used.Current Rating: max. 3A / 125VacCable Length: 1m

AC664 BlackAC665 BlueAC666 GreenAC667 RedAC668 Yellow

BANANA PLUGCONNECTING CABLES 20A

Note: These cables have a 4mmbanana plug moulded onto eachend. Very flexible silicone coatedcable is used. The banana plugsare stackable with built-in 4mmbanana sockets. IEC1010 rated.Current Rating: max. 20A/250VacCable Length: 1m

AC669 BlackAC670 RedAC671 Yellow

DC / AC POWERCONNECTORS

Note: The wires can be solderedto the plug. The socket has abreak contact to allow discon-nection of an internal batterysupply. The outer / inner dimen-sions are indicated.

AA586 3.4mm/1.3mm, 9mm longFB943 3.4mm/1.0mm, 9mm longAA582 5.5mm/2.1mm, 9mm longDB309 5.5mm/2.5mm, 9mm longFB965 6.3mm/3.1mm, 10mm long

07.18

AC675 2.4mm/0.75mm easily replaceablespare plug


AB716 4.0mm/1.7mm easily replaceablespare plug


AB412 In-line DC/AC Power Socket5.5mm/2.5mm

AC677 In-line DC/AC Power Socket5.5mm/2.1mm

FB939 4mm/1.3mm Power SocketPCB Mount, 6.5mm deep

AA584 5.5mm/2.1mm Power SocketPCB Mount, 9mm deep

FB962 5.5mm/2.0mm Power SocketPanel Mount

AA583 6mm/2mm Power Socket PanelMount, 9mm deep

DB308 6mm/2.5mm Power Socket PanelMount, 9mm deep

FB938 5.6mm/2mm Power Socket PanelMount, 9mm deep fits (AA582)

AC779 5.6mm/2.5mm Power Socket PanelMount, 9mm deep fits (DB309)

FB947 6mm/2.1mm Power Socket PanelMount, 9mm deep

AA581 Car cigarette lighter plug

AB410 Panel Mount Socket for Car Plug

AB409 In-line Socket for Car Plug

AB411 Spiral Cord Car Plug to Socket 1m

MAINS POWERCONNECTORS

AA280 3 Pin Plug 230V 15Amp White

GB829 2 Pin European AC Power Plug10A 250V Black

GB830 2 Pin European AC Flat Plug2.5A 250V Black

GB831 2 Pin European AC Flat Socket2.5A 250V Black

GB745 Mains Plug Adapter for AmericanPower Socket

GB746 Mains Plug Adapter for EuropeanPower Socket

GB744 Mains Plug Adapterfor a European 2 pin Power SocketDimensions: 37 x 37 x 49mm

AB258 Figure 8 panel mount AC plug

EB329 Con. Figure 8 panel mount plug

AB413 Figure 8 Extension Cord, 2m

07.19

AD015 IEC Mains 3 pin Plug with a built-inEMI filter for max. 250Vac / 10A,Temp. Range: -25°C to +85°C,panel hole size: 31.5 x 22.5mm

AB087 IEC Mains 3 pin Plug and Switchpanel mount, can take 20 x 5mm5A fuse (AB056) (not included)

AA644 IEC Mains 3 pin Power Plugpanel mount, can take 20 x 5mm5A fuse (AB056) (not included)

AD167 IEC Mains 3 pin Plug and Socketpanel mount, current rating: 10A

AA643 IEC Mains 3 pin Power socketchasis mount

AA642 IEC Mains 3 pin Power Pluginline

AB294 IEC Mains 3 pin Power Socket

inline

AD168 AC Cord IEC Mains 3 pin Socketto IEC Mains 3 pin Plug, 1.8m

EB003 AC Cord IEC Mains 3 pin Socketto 3 pin Plug, 2m

EB182 Multiplug Adaptor 2x15amp

EB181 Multiplug Adaptor 2x5amp1x15amp

EB196 Multiplug Adaptor non illuminated4x15Amp 2x5Amp

EB212 Switchplug Duo with cover 4x4

EB210 Switchplug with cover 2x4

EB164 Switchplug with enclosure 2X4

’D’ TYPE AND COMPUTERCONNECTORS

’D’ TYPE CONNECTING CABLES

AB419 Serial Lead 9 pin Plugto 9 pin Socket, 2m

GB714 Serial Lead 25 pin Plugto 25 pin Socket, 2m

’D’ TYPE CONNECTING CABLES

GB378 Dual Serial Laplink Lead 25 pinSocket to 9 way Socket, 2m

GB377 Parallel Laplink Lead 25 pin Plugto Plug, 2m

GB379 VGA Monitor Lead 15 pin 3 rowHigh Density Socket to Plug, 2m

07.20

GB380 Parallel Printer Lead 25 pin Plugto Centronics Plug, 3m

GB375 Serial Adapter 9 pin Socket to 25pin Plug

AB176 USB cable A plug to B plug, 5m

AB366 USB 2 cable A plug to A plug, 2m

’D’ TYPE CONNECTORSWIRE SOLDER

Note: Wires are soldered to theback of the connector pins.These connectors are often usedin computer equipment.

JB046 9 pin PlugJB047 9 pin Socket

JB127 15 pin Plug

JB126 15 pin Socket

Note: 15 pin 3 row High Densityconnectors for computer moni-tors.

AA501 PlugAA502 Socket

JB048 25 pin Plug

JB049 25 pin Socket

AC759 37 pin Plug

AC760 37 pin Socket

GB182 Parallel Centronics Socket

MB099 9 pin Connector CoverMB100 15 pin Connector CoverMB101 25 pin Connector CoverAC761 37 pin Connector Cover

GB204 Screws for H Cover (GB203)

GB203 H Cover, Dual 25-way

’D’ TYPE CONNECTORSPCB MOUNT

MB155 9 pin Plug right angleMB159 9 pin Socket right angleMB156 15 pin Plug right angleMB160 15 pin Socket rightMB157 25 pin Plug right angleMB161 25 pin Socket right angleMB158 37 pin Plug right angleMB162 37 pin Socket right angle

AC762 15 pin, 3 row, High Density Socket,right angle, PCB mount

’D’ TYPE CONNECTORSIDC MOUNT

AA539 9 way PlugAA536 9 way SocketAA540 15 way PlugAA537 15 way SocketAA541 25 way PlugAA538 25 way SocketAC765 37 way PlugAC766 37 way Socket

COMPUTER CONNECTORS 25pcs

AB649

A mixed pack that contains 25 computerconnectors.

ORDER CODE: AB649

AC763 USB A socket, 90° PCB mount

07.21

AC764 USB B socket, 90° PCB mount

IDC HEADER PLUGSAND SOCKETS

Note: IDC connectors with 0.1inch (2.54mm) pin spacing. Theopen plug connectors can be cutto 10, 14, 16, 20, 26, 34, 40 and 50pins as needed. These connec-tors are often used in computerequipment.Connector pins have2.54mm pitch.

IDC SOCKET DUAL ROWFOR RIBBON CABLE

MB141 10 Pin MB145 26 PinMB142 14 Pin MB146 34 PinMB143 16 Pin MB147 40 PinMB144 20 Pin MB148 50 Pin

IDC BOX PLUG DUAL ROWPCB MOUNTING

DB560 10 Pin DB564 26 PinDB561 14 Pin DB565 34 PinDB562 16 Pin DB566 40 PinDB563 20 Pin DB567 50 Pin

IDC BOX PLUG DUAL ROW 90°PCB MOUNTING

AA662 10 Pin AA648 34 PinAA663 14 Pin AA667 40 PinAA664 16 Pin AA668 50 PinAA666 26 Pin

IDC BOX PLUG DUAL ROWLATCHING TYPEPCB MOUNTING

AD108 10 Pin AD111 26 PinAD109 14 Pin AD112 34 PinFB497 16 Pin AD113 40 PinAD110 20 Pin AD114 50 Pin

IDC BOX PLUG DUAL ROW 90°LATCHING TYPEPCB MOUNTING

AD116 10 Pin AD120 26 PinAD117 14 Pin AD121 34 PinAD118 16 Pin AD122 40 PinAD119 20 Pin AD123 50 Pin

IDC OPEN PLUG DUAL ROWPCB MOUNTING

MB154 80 Pin

IDC OPEN PLUG DUAL ROW 90°PCB MOUNTING

AA649 80 pin

IDC OPEN PLUG SINGLE ROWPCB MOUNTING

AA555 40 Pin

IDC OPEN PLUG SINGLE ROW 90°PCB MOUNTING

AA661 40 pin

IDC SOCKET SINGLE ROWPCB MOUNTING

AC820 5 PinAC821 8 PinAC822 10 PinAC823 40 Pin

IDC SOCKET DUAL ROWPCB MOUNTING

AC850 10 PinAC851 16 PinAC852 20 PinAC853 40 Pin

MEMBRANE KEYBOARDCONNECTOR SOCKETS

SINGLE ROW PCB MOUNTING

Note: These connectors are oftenused in computer equipment likemembrane keyboards. Connectorpins have 2.54mm pitch.

AB530 8 Pin AB535 13 PinAB531 9 Pin GB279 14 PinAB532 10 Pin AB536 15 PinAB533 11 Pin AB537 16 PinAB534 12 Pin

90° MEMBRANE KEYBOARDCONNECTOR SOCKETS

SINGLE ROW PCB MOUNTING

GB478 10 PinAB539 13 Pin

IDC ACCESSORIES

DB745 Mini Jumper 0.1 inch

SINGLE ROW HEADERPLUGS AND SOCKETS

Note: MOLEX connectors with0.1 inch (2.54mm) pin spacing.The rigid PCB mount header,with friction lock, only fits thesocket housing in one way. Thesocket housing may have wiresconnected to it else it acceptscrimp terminals (sold separately).These connectors are often usedto make PCB interconnections.

FRICTION LOCK HEADERPLUGS PCB MOUNT

GB616 2 Pin GB630 9 PinGB618 3 Pin GB632 10 PinGB620 4 Pin GB634 11 PinGB622 5 Pin GB636 12 PinGB624 6 Pin GB638 13 PinGB626 7 Pin GB640 14 PinGB628 8 Pin GB642 15 Pin

FRICTION LOCK SOCKETHOUSINGS

GB617 2 Pin GB631 9 PinGB619 3 Pin GB633 10 PinGB621 4 Pin GB635 11 PinGB623 5 Pin GB637 12 PinGB625 6 Pin GB639 13 PinGB627 7 Pin GB641 14 PinGB629 8 Pin GB643 15 Pin

07.22

FRICTION LOCK SOCKETHOUSINGS WITH WIRE

AB463 2 pin, with 15cm wiresGB460 3 pin, with 15cm wiresAB464 4 pin, with 15cm wiresAB465 5 pin, with 15cm wiresGB200 6 pin, with 15cm wiresAB466 8 pin, with 15cm wiresAB467 10 pin, with 15cm wiresAB468 12 pin, with 15cm wiresAB469 15 pin, with 15cm wiresAB694 20 pin, with 15cm wires

CRIMP TERMINALFOR SOCKET HOUSING

GB644 Crimp Terminal

WIRE-TO-WIREPOWER CONNECTORPLUG / SOCKET SETS

Note: These connectors can beused for wiring harnesses thatmake multiple, high current, wire-to-wire connections.These connectors are sold insets. Each set consists of oneplug housing, one matchingsocket housing and the requiredcrimp terminals.Current Rating: 8A / 50VVoltage Rating: 300VacPin Spacing: 6.2mmAccepts wires: 0.5 to 2.1mm²Housing: Nylon UL 94V-0Crimp Terminals: tin-plated phos-phor bronze

AD023 1x2 Pole AD027 2x3 PoleAD024 1x3 Pole AD028 3x3 PoleAD025 1x4 Pole AD029 3x4 PoleAD026 2x2 Pole

CRIMP TERMINAL FORWIRE-TO-WIRE SOCKET HOUSING

AD030 Pin Crimp Terminal for Socket

CRIMP TERMINAL FORWIRE-TO-WIRE PLUG HOUSING

AD031 Pin Crimp Terminal for Plug

SCREWLOCK MULTIPINCONNECTORS

Note: These are RF shielded, cir-cular, multipin connectors. Twoconnectors are fastened togetherwith a screwlock mechanism.Contact Rating: max. 0.5A / 50V

PANEL MOUNTSCREWLOCK MULTIPIN PLUGS

Note: Panel mount plugs thathave solder connections at theback.Panel hole diameter: 15.7mmPanel thickness: 6mm maximum

AC738 2 Pin AC742 6 PinAC739 3 Pin AC743 7 PinAC740 4 Pin AC744 8 PinAC741 5 Pin

IN-LINESCREWLOCK MULTIPIN SOCKETS

Note: Each in-line socket has abuilt-in cable clamp.Internal solder connections.Cable diameter: 5 - 7mm


IN-LINESCREWLOCK MULTIPIN PLUGS

Note: Each in-line plug has abuilt-in cable clamp.Internal solder connections.Cable diameter: 5 - 7mm


DIN SOCKETSAND PLUGS

AB437 2 Pin DIN Plug

AB438 In-line 2 Pin DIN Socket

AB439 2 Pin DIN Panel Mount Socket

FB967 4 Pin, PCB Mount Mini DINSocket

AB151 4 Pin, Mini-DIN Plug

AB441 In-line 4 Pin Mini-DIN Socket

MB152 5 pin, 180° DIN Plug

AA533 5 pin, 180° In-Line DIN Socket

MB153 5 pin, 180° Panel Mount DINSocket

AB442 6 Pin Mini-DIN Plug

07.23

AB443 In-line 6 Pin Mini-DIN Socket

FB911 6 pin, (5 pin, 240° + 1 centre pin)DIN Plug

FB893 6 pin, (5 pin, 240° + 1 centre pin)Panel Mount DIN Socket

AA785 7 pin, 270° DIN Plug

FB934 7 pin, 270° Panel Mount DINSocket

FB885 8 pin, (7 pin, 240° + 1 centre pin)DIN Plug

AC999 S-Video Cable, 4 pin Mini-Din Plugto 4 pin Mini-Din Plug, 5m

GB695 Adapter 8 pin Mini-Din Plug toStereo 3.5mm Jack Plug, 2m

GB696 Adapter 8 pin Mini-Din Plug to

Stereo 6 pin Din Plug (5 pinsover 180° + 1 centre pin)

GB376 Keyboard PS2 Lead, 6 Pin Mini-DIN Socket to Plug, 2m

GB703 Keyboard PS2 Adapter, 5 pin,180° DIN Socket to 6 Pin Mini-DIN Plug

BNC / TNC / SMACONNECTORS

EB431 Adapter BNC Plug to F Socket

AC695 Adapter BNC Socket to F Plug

EB430 Adapter BNC Plug to RCA Socket

FB855 Adapter BNC Socket to RCA Plug

FB837 Adapter BNC Plug to TV PALSocket

AC687 Adapter BNC Socket to TV PALPlug

FB875 Adapter BNC Plug to UHF / PLSocket

FB873 Adapter BNC Socket to N Plug

FB863 Adapter BNC Socket to SMA Plug

FB850 Adapter BNC Socket to TNC Plug

FB862 Adapter BNC Socket to UHF / PLPlug

FB871 Adapter SMA Socket to TNC Plug

JB201 BNC Plug 50 Ohm Terminator

AC681 90° Black Insulated BNC Plugwith screw connection

FB849 BNC Plug for TV coaxial cable7mm max. diameter coaxial cable

MB130 BNC Plug, twist-on for RG58/U,50 Ohm, 5mm diameter cable

EB334 BNC Plug, twist-on for RG59/U,75 Ohm, 6.2mm diameter cable

AC679 BNC Plug, crimp-on for RG58/U,50 Ohm, 5mm diameter cable

AC680 BNC Plug, crimp-on for RG59/U,75 Ohm, 6.2mm diameter cable

07.24

AB264 In-line BNC Socket twist-onfor RG58/U, 50 Ohm,5mm diameter coaxial cable

EB333 In-line BNC Socket twist-onfor RG59/U, 75 Ohm,6.2mm diameter coaxial cable

AC682 Panel Mount Insulated BNC Socket,solder connections, IEC1010 rated,9mm diameter panel hole

AC683 Panel Mount BNC Socketwith square mounting plate,solder connections, 9.5mm diameter panel hole

AA740 Panel Mount BNC Socket,solder connections,9.6mm diameter panel hole

AC686 BNC Connector BNC Socket toBNC Socket

FB852 L Adapter BNC Socket to BNC Plug

AC688 T Adapter BNC Socket to 2 BNCSockets

EB816 T Adapter BNC Plug to 2 BNCSockets

FB860 TNC Plug, twist-on for RG58/U50 Ohm, 5mm diameter cable

GB743 In-line TNC Socket crimp-onfor RG58/U, 50 Ohm,5mm diameter coaxial cable

EB328 Panel Mount TNC Socket,solder connections,9mm diameter panel hole

FB882 SMA Plug crimp-on

AC696 In-line SMA Socket crimp-on

AC697 Panel Mount SMA Socket,solder connections,6.5mm diameter panel hole

AC698 Panel Mount SMA Socket,with square mounting plate,crimp-on connections,5mm diameter panel hole

FB880 L Adapter SMA Socket to SMAPlug

AC699 SMA Connector SMA Socket toSMA Socket

N / PL259 (UHF) TYPECONNECTORS

FB853 Adapter Mini UHF Socket to SMAPlug

FB872 Adapter N Socket to SMA Plug

FB877 Adapter N Socket to TNC Plug

FB848 Adapter SMA Socket to UHF / PLPlug

AC907 Adapter TNC Plug to N Plug

FB878 Adapter TNC Socket to N Plug

FB836 Adapter UHF / PL Socket to N Plug

FB842 Adapter UHF / PL Socket to TNCPlug

FB857 UHF / PL Twist-On Plug for RG59

07.25

coaxial cable

FB843 Adapter RCA Socket to UHF / PLPlug

RADIO / TV / SATELLITECO-AX CONNECTORS

EB883 Car radio Aerial Plug

AB440 In-line Car Radio Aerial Socket

AB453 Adapter TV (PAL) Socket to3.5mm Mono Jack Plug

EB158 Samoosa TV Adapter PAL Plugto 2 PAL Sockets

FB496 RF shielded TV T-adapter PALplug to 2 PAL sockets

AA728 Screwless TV coaxial cableConnector

AA727 TV Connector PAL Socket to PALSocket

AB451 TV Panel Mount (PAL) Plug

AB452 TV Panel Mount (PAL) Socket

AD264 TV Outlet Box with PAL Socket

AA726 TV PAL Plug

EB157 TV In-Line PAL Socket

AB449 RF shielded TV coaxial (PAL) plug

AB450 RF shielded in-line TV coaxial(PAL) socket

FB831 TV L shaped PAL Plug

AB448 TV L shaped PAL Socket

Note: TV Coaxial lead PAL socketto PAL plug

AA415 2mAA417 5m

FB846 Gold-Plated TV Adapter PAL Plugto F Socket

FB854 TV Adapter PAL Socket to FSocket

AC694 TV Adapter PAL Socket to FPlug

FB861 L Adapter F Socket to F Plug

AD225 T Adapter 3 x F Sockets

AC689 F Plug, crimp-on for RG58/U,50 Ohm, 5mm diameter cable

AC690 F Plug, crimp-on for RG59/U,75 Ohm, 6.2mm diameter cable

AC691 F Plug, twist-on for RG58/U,50 Ohm, 5mm diameter cable

AC692 F Plug, twist-on for RG59/U,75 Ohm, 6.2mm diameter cable

AC693 Panel Mount F Socket,solder connections,9.6mm diameter panel hole

07.26

TERMINAL / CONNECTORTAGS AND

PRESS CONNECTORS

SOLDERING TERMINALS 50pcs

AB647

A mixed pack that contains 50 soldering ter-minals.

ORDER CODE: AB647

PCB MOUNT BLADE CONNECTORPACK OF 100pcs

PCB mount blade connector. Pack of 100pieces. Dimensions: 11mm length, 2.8mmwidth, 0.8mm thick for 1mm diameter hole.

ORDER CODE: AB631

PCB MOUNT BLADE CONNECTOR

PCB mount blade connectorDimensions: 16mm length, 6.3mm width

ORDER CODE: AC736

RING LUGPACK OF 30pcs

Ring Lug. Pack of 30 pieces. Dimensions:23mm length, 13mm width, 0.5mm thick, 6.5x 9.5mm hole.

ORDER CODE: AB634

CRIMPING RING LUGS

Note: Uninsulated Crimping RingLugs. Dimensions indicated are

wire acceptance x hole size.

DB253 1.5mm x 4mm, 1mm thickEB192 1.5mm x 5mm, 1mm thickEB193 2.5mm x 4mm, 1mm thickEB194 2.5mm x 5mm, 0.8mm thickEB155 3.5mm x 6mm, 1.3mm thickEB195 3mm x 5mm, 1.2mm thick

SOLDERLESS, INSULATEDCRIMPING CONNECTORS

Note: Insulated connectors thatare crimped onto wire and do nothave to be soldered. One can usea crimping tool like (AC737).Made of tin-plated copper with aninsulating plastic sleeve.Colour of Sleeving:Red:use wire diameter: 0.6 - 1.2mmwire size: 0.5 - 1.0mm²Blue:use wire diameter: 1.2 - 1.8mmwire size: 1.0 - 2.5mm² Yellow:use wire diameter: 1.8 - 2.9mmwire size: 2.5 - 6mm²

RING CRIMPING CONNECTORS

REDAC715 blister pack containing 10 pieces of

ring connector with 3.7mm hole

AC716 blister pack containing 10 pieces ofring connector with 4.3mm hole

FB408 ring connector with 5.3mm holeAC782 blister pack containing 10 pieces of


BLUEAC717 blister pack containing 10 pieces of




AC718 blister pack containing 10 pieces ofring connector with 5.3mm hole

YELLOWFB420 ring connector with 6.35mm holeAC784 blister pack containing 10 pieces of




FORKED SPADECRIMPING CONNECTORS


forked connector with 3.7mm gap

AC720 blister pack containing 10 pieces offorked connector with 4.3mm gap







YELLOWAC726 blister pack containing 10 pieces of



BLADE / RECEPTACLECRIMPING CONNECTORS

RED

AC735 blister pack containing 10 pieces ofblade connector, 2.8mm wide

FB336 receptacle connector, 2.8mmAC791 packet containing 100 pieces of

receptacle connector, 2.8mm

FB332 blade connector, 4.8mm wideAC787 blister pack containing 10 pieces of

blade connector, 4.8mm wide

AA197 receptacle connector, 4.8mmAC788 packet containing 100 pieces of


AA195 blade connector, 6.35mm wideAC789 blister pack containing 10 pieces of


AA196 receptacle connector, 6.35mmAC790 packet containing 100 pieces of


BLUE


07.27








YELLOW



FB339 receptacle connector, 6.35mmAC797 blister pack containing 10 pieces of


INSULATED RECEPTACLECRIMPING CONNECTORS

REDAC734 packet containing 100 pieces of

insulated receptacle, 6.35mm

BLUEAC733 packet containing 100 pieces of

insulated receptacle, 6.35mm

PIGGY-BACKCRIMPING CONNECTORS


piggy-back connector, 6.35mm


piggy-back connector, 6.35mm

BULLETCRIMPING CONNECTORS

RED

AA198 bullet connector plugAC798 blister pack containing 10 pieces of

bullet connector plug

AA199 bullet connector socketAC799 packet containing 100 pieces of

bullet connector socket

BLUE

FB328 bullet connector plugAC800 blister pack containing 10 pieces of

bullet connector plug

FB330 bullet connector socketAC801 blister pack containing 10 pieces of

bullet connector socket

ROUND PINCRIMPING CONNECTOR

Note: These connectors are usedon the ends of multi strandedwire to prevent wire fraying.

AA194 red 1.9mm dia. pin connectorAC802 blister pack containing 10 pieces of

red 1.9mm dia. pin connector

FB326 blue 1.9mm dia. pin connectorAC803 blister pack containing 10 pieces of

blue 1.9mm dia. pin connector

FB327 yellow 2.8mm dia. pin connectorAC804 blister pack containing 10 pieces of

yellow 2.8mm dia. pin connector

INSULATED BUTT / SPLICECRIMPING CONNECTORS

Note: Each connector is used tomake a permanent joint betweentwo wires.


butt connector


butt connector

YELLOWAC730 blister pack containing 10 pieces of

butt connector

PRESS / SPLICE CONNECTORS

AB425 2 Wires Press Connector, orange0.4 - 0.8mm diameter wire

AB426 3 Wires Press Connector, green0.4 - 0.8mm diameter wire

AB427 4 Wires Press / Splice Connector,green, 0.9 - 1.3mm diameter wire

LOUDSPEAKERCONNECTORS

LOUDSPEAKERCONNECTION TERMINALS

Note: Loud speaker connectionterminals are black and red. Itaccepts wires with diameters upto 2.5mm. These terminal blockscan be used where wire connec-tions have to be changed easilyand quickly.

FB753 2 Lever Loudspeaker Terminalsquare, 55 x 55mm

FB754 2 Lever Loudspeaker Terminalround, 76.2mm diameter

AD007 Professional loudspeaker connectorPanel Mount Socket, 4 pins,round, 50mm diametersolder connections

AD008 Professional loudspeaker connectorIn-line Socket, 4 pinssolder connections

07.28

AD009 Professional loudspeaker connectorPlug with Lock Lever, 4pins,screw connections

TERMINAL BLOCKS

PCB Screw connectorsNote: The PCB connectors canbe mounted directly onto a PCB.The 2 and 3 screw connectorscan be stacked to create anynumber of terminals. Connectorpins have 5.08mm pitch.

JB044 PCB Mounted 2 Screw TerminalBlock, 2.3mm holes, 5mm Pitch

Blister pack that contains 5 PCB mount2-screw terminal blocks: 5 x (JB044).

ORDER CODE: AB738

JB045 PCB Mounted 3 Screw TerminalBlock, 2.3mm holes, 5mm Pitch

PLUG-IN AND SCREWPCB MOUNT CONNECTORS

Note: Plug-in terminal connec-tors that are used in plug-and-socket pairs. It is ideal for mak-ing easily removable wiring har-ness to PCB connections.Sockets have screw terminals for

connecting to wires. Headerplugs are directly mounted (sol-dered) onto PCBs. The socketsfit the header plugs only in oneway.Current Rating: 10A / 300VAccepts wires up to 2mm diame-terConnector pins have 5.08mmpitch

PLUG-IN CABLE MOUNTINGSOCKETS

AB540 2 PinAB541 3 PinAB542 5 PinAB543 8 Pin

PLUG-IN PCB MOUNTHEADER PLUGS


90° PLUG-IN PCB MOUNTHEADER PLUGS


12 SEGMENT PVCSTRIP CONNECTORS

MB032 3A 2.7mm holesAC678 10A 4.0mm holesAA933 15A 4.3mm holes

CROCODILE CLIPS

FB902 27mm White InsulatedAB218 27mm Blue InsulatedAB219 27mm Green InsulatedAB220 27mm Yellow InsulatedJB218 27mm Black InsulatedJB219 27mm Red Insulated

JB220 35mm Black InsulatedJB221 35mm Red InsulatedJB222 44mm Black InsulatedJB223 44mm Red Insulated

AC711 55mm Black Battery Clip with ScrewAC712 55mm Red Battery Clip with Screw

AB996 55mm Red Insulated Battery ClipAB997 55mm Black Insulated Battery Clip

EB314 80mm Red Battery ClipEB315 80mm Black Battery Clip

SET OF 10 CROCODILE CLIPS

A very useful pack containing ten pieces ofinsulated stranded wire of different coloursterminated at each end by an insulated croc-odile clip of the same colour.

ORDER CODE: MB140

WIRE CLIPS

40mm WIRE CLIPS

Note: Clips that have retractableconnecting hooks. Each clip hasa solder connection.

AC713 blackAC714 red

135mm WIRE CLIPS

07.29

Note: Clips that have retractableconnecting hooks and are suit-able for connecting to 4mmbanana plugs / connectingcables.

AB020 blackAB021 red

THERMALMANAGEMENT

HEATSINKS

Note: The thermal resistance of aheatsink gives one an indicationof how well it can conduct(absorb) heat at the mountingsurface and radiate the heat tothe surrounding air. The smallerthe thermal resistance is, the bet-ter the heatsink transfers heat.Measured in Kelvin per Watt K/Wor Degrees Celsius per Watt°C/W (these are the same).

GB548 Heatsink TO5/TO39 clip on15x15x9mm, 55°C/W

DB018 Heatsink TO220 clip on 25°C/W

AA787 Heatsink TO126/TO22025x15x20mm, 18.2°C/W

HB262 Heatsink TO220/TO3P30x25x13mm, 15.5°C/W

PB243 Heatsink for TO345x45x24mm, 7.7°C/W

GB549 Heatsink for TO3/TO66/TO22045x45x24mm, 7.7°C/W

GB297 Heatsink T022027x31x33mm, 17°C/W

GB235 Heatsink vertical mount, TO22012x34x40mm, 8°C/W

AB007 Heatsink vertical mount,TO220/TO3P, 12x35x44mm,10.9°C/W

AB008 Heatsink vertical mount,TO220/TO3P, 20x36x38mm,9.6°C/W

GB550 Heatsink vertical mount,TO220/TO3P, 42x38x25mm,5°C/W

AC824 Heatsink without holes50x62x17.5mm, 4°C/W

AC885 Heatsink without holes75x173x28mm, 1.8°C/W

AB267 Heatsink for 2 x TO3’s75x120x64mm, 1.6°C/W

AB266 Heatsink without holes75x120x64mm, 1.6°C/W

HEATSINK ACCESSORIES

AA623 Heat Sink Compound 25gPB281 Heat Sink Compound 150gGB172 Greaseless Insulator for TO220DB315 Insulating Bushes for TO220DB314 Insulating Bushes for TO3DB312 Mica Insulator for TO220 1.2 K/WDB311 Mica Insulator for TO3, 0.3K/WDB313 Mica Insulator for TOP3, 0.8K/W

COOLING BRUSHLESSFANS

EB345 12VDC Brushless Fan40x40x10mm sleeve bearing

EB264 12VDC Brushless Fan60x60x25mm sleeve bearing

PB308 12VDC Brushless Fan80x80x25mm sleeve bearing

AD165 12VDC Brushless Fan80x80x25mm ball bearing

FB266 12VDC Brushless Fan92x92x25mm sleeve bearing

FB489 12VDC Brushless Fan120x120x25mm sleeve bearing

AA282 24VDC Brushless Fan60x60x25mm sleeve bearing

FB499 115VAC Brushless Fan120x120x38mm sleeve bearing

PB307 230VAC Brushless Fan80x80x38mm sleeve bearing

FB267 230VAC Brushless Fan120x120x38mm ball bearing

FB268 230VAC Brushless Fan120x120x25mm sleeve bearing

07.30

METAL FINGER GUARDS

AD150 Finger Guard for 80x80mm Fanmounting hole spacing: 71.5mm

AD151 Finger Guard for 120x120mm Fanmounting hole spacing: 104.5mm

PELTIER MODULE

PELTIER MODULE 40 X 40MM

This is a Peltier effect thermoelectric coolingmodule. It consists of 127 p-n junctions thatare connected electrically in series, but ther-mally in parallel, sandwiched between 2ceramic faceplates. When current is passedthrough the module heat is pumped fromone surface and deposited on the oppositesurface, (hot side), of the module. Heat mustbe removed from the hot side by a heat sinkor cooling fan to prevent the module fromoverheating.Specifications:Supply Voltage: 15.4Vdc max.Supply Current: 6.0A max.Power (Q max.): 51.4Watt max.Temperature difference (delta T):

67°C max at an ambient temperature of30°C with no load

number of couples: 127Dimensions: 40 x 40 x 4mmWeight: 21.8g

ORDER CODE: AB103

CIRCUITPROTECTION

FUSES

Note: Fuses are used to protectelectric circuits against too highelectric currents. A fuse discon-nects permanently when the cur-rent flowing through it exceedsthe fuse rating.

FUSES 30pcs

AB653

A mixed pack that contains 30 fuses.ORDER CODE: AB653

FAST-ACTING PICO FUSES

Note: Pico fuses are space sav-ing and axially leaded. Each fusehas a protective sleeving. Clearlymarked. Fast-acting.Body Dimensions: 4 x 10mm

AB472 100mA AB476 1.5AAB473 150mA AB477 2AAB345 250mA AB478 2.5AAB474 300mA AB479 3AAB346 500mA AB480 4AAB475 800mA AB481 5AAB347 1A

Note: The fuses are either fast-or slow-acting.Construction: glass cartridge, sil-vered caps.Voltage rating: 250Vac

FAST-ACTING FUSES 20X5MMAD070 a single 50mA fast 20 x 5mm fuseAD071 a box that contains 10 pieces of

50mA fast 20 x 5mm fuses

JB020 a single 100mA fast 20 x 5mm fuseAC645 a box that contains 10 pieces of


AD072 a single 125mA fast 20 x 5mm fuseAD073 a box that contains 10 pieces of


EB929 a single 160mA fast 20 x 5mm fuseAD075 a box that contains 10 pieces of




JB022 a single 250mA fast 20 x 5mm fuse

AC647 a box that contains 10 pieces of250mA fast 20 x 5mm fuses



AD076 a single 400mA fast 20 x 5mm fuseAD077 a box that contains 10 pieces of




AB031 a single 630mA fast 20 x 5mm fuseAC617 a box that contains 10 pieces of




JB026 a single 1A fast 20 x 5mm fuseAD074 a box that contains 10 pieces of

1A fast 20 x 5mm fuses

AD078 a single 1.25A fast 20 x 5mm fuseAD079 a box that contains 10 pieces of

1.25A fast 20 x 5mm fuses

JB027 a single 1.6A fast 20 x 5mm fuseAC651 a box that contains 10 pieces of


JB028 a single 2A fast 20 x 5mm fuseAC652 a box that contains 10 pieces of






EB128 a single 3.5A fast 20 x 5mm fuse

JB031 a single 4A fast 20 x 5mm fuse



EB928 a single 6.3A fast 20 x 5mm fuseAC644 a box that contains 10 pieces of






AA563 a single 15A fast 20 x 5mm fuseAD081 a box that contains 10 pieces of


AA564 a single 20A fast 20 x 5mm fuse

EB174 a single 25A fast 20 x 5mm fuse

SLOW-BLOW FUSES 20X5MMAB037 a single 50mA slow 20 x 5mm fuseAC619 a box that contains 10 pieces of

50mA slow 20 x 5mm fuses

07.31

AB038 a single 80mA slow 20 x 5mm fuseAC620 a box that contains 10 pieces of






















AB049 a single 1A slow 20 x 5mm fuseAC631 a box that contains 10 pieces of

1A slow 20 x 5mm fuses

AB050 a single 1.25A slow 20 x 5mm fuseAC632 a box that contains 10 pieces of

1.25A slow 20 x 5mm fuses

























FAST-ACTING FUSES 32X6.35MMAA939 a single 100mA fast 32 x 6mm fuse

AA940 a single 200mA fast 32 x 6mm fuse

AA941 a single 250mA fast 32 x 6mm fuse

AA942 a single 315mA fast 32 x 6mm fuseAC663 a box that contains 10 pieces of


AA943 a single 500mA fast 32 x 6mm fuseAC610 a box that contains 10 pieces of


AA945 a single 1A fast 32 x 6mm fuseAC611 a box that contains 10 pieces of


AA946 a single 1.6A fast 32 x 6mm fuse



AA948 a single 2.5A fast 32 x 6mm fuse

AA949 a single 3.15A fast 32 x 6mm fuseAC613 a box that contains 10 pieces of






FB830 a single 6A fast 32 x 6mm fuse








CAR BLADE FUSES

Note: Fast-acting (19.1x18.7mm)

AA634 5 Amp AA638 25 AmpAA635 10 Amp AA639 30 AmpAA636 15 Amp AB194 35 AmpAA637 20 Amp AB195 40 Amp

FUSE HOLDERS

JB019 Fuse Holder Clip PCB Mountrequire 2 clips per 20x5mm fuse

HB308 Fuse Holder PCB Mount withBase for 20x5mm Fuse

AB482 Fuse Holder Cover for (HB308)

JB018 Fuse Holder In-linefor 20x5mm Fuse

FB471 Fuse Holder In-linefor 32x6.3mm Fuse

JB017 Fuse Holder Panel Mountingfor 20x5mm Fuse

EB159 Fuse Holder Panel Mountingfor 32x6.3mm Fuse

AB483 In-line Fuse Holderfor Car Blade Fuses

07.32

AB484 Panel Mount Fuse Holderfor Car Blade Fuses

PTC RESETTABLE FUSES

Note: These are PTC resettablefuses that are current and tem-perature sensitive. It is used topermanently protect circuitsagainst short-circuit and overcur-rent faults. It is a slow-actingtype of fuse. The holding current,Ih, is the normal operating cur-rent of the PTC. The tripping cur-rent, It, is the current limit atwhich the PTC’s resistanceincreases rapidly to stop the cur-rent flowing through it. The PTCwill remain in a high resistancestate after it has been tripped. Itwill automatically reset again ifthe fault condition is removed.Temperature Range: -40 to 85°CMax. temp. when tripped: 125°CMax. Current: 40AIndicated Max. Voltage of PTCIndicated Resistance is at 23°C

AD019 Ih=0.1A, It=0.2A, 60V, 2.5-7.5EAD032 Ih=0.17A, It=0.34A, 60V, 2-7EAD033 Ih=0.2A, It=0.4A, 60V, 1.5-4.4EAD020 Ih=0.25A, It=0.5A, 60V, 1-3EAD034 Ih=0.3A, It=0.6A, 60V, 0.76-2.1EAD035 Ih=0.4A, It=0.8A, 60V, 0.52-0.86EAD021 Ih=0.5A, It=1A, 60V, 0.41-1.17EAD036 Ih=0.65A, It=1.3A, 60V, 0.27-0.72EAD037 Ih=0.75A, It=1.5A, 60V, 0.18-0.6EAD022 Ih=0.9A, It=1.8A, 30V, 0.07-0.22EAD038 Ih=1.1A, It=2.2A, 30V, 0.05-0.18EAD039 Ih=1.35A, It=2.7A, 30V, 0.04-0.13EAD040 Ih=1.6A, It=3.2A, 30V, 0.03-0.11EAD041 Ih=1.85A, It=3.7A, 30V, 0.03-0.09EAD042 Ih=2.5A, It=5A, 30V, 0.02-0.07EAD043 Ih=3A, It=6A, 30V, 0.02-0.08E

THERMAL CUTOFF FUSES

Note: Heat sensitive non-reset-

table axial fuses that provideupper limit temperature protec-tion. The metal case of the fuseis not isolated and will be at thesupply voltage.Max. Current is 10A / 250VThe fusing-off temperature, atwhich the fuse disconnects, isindicated below.

AB485 58°C the tolerance is ± 3°CAB486 68°C the tolerance is ± 3°CAB487 83°C the tolerance is ± 3°CGB694 100°C the tolerance is ± 3°CAB488 119°C the tolerance is ± 2°CAB489 149°C the tolerance is ± 3°CAD049 182°C the tolerance is ± 4°CAD050 205°C the tolerance is ± 5°CGB679 245°C the tolerance is ± 5°C

THERMALCIRCUIT BREAKERS

Note: These are heat sensitive,automatically resettable circuitbreakers. It can be used to pro-vide upper limit temperature pro-tection and can also be used inautomatic temperature controlsystems. It is used in homeappliances like electric heaters.Dimensions:19mm diameter x 15mm heightSwitching Type: normally closedSwitching Voltage: 240VacContact Rating: 6A / 240Vac

(for resistive loads)Operating Tolerance: ± 5%Temperature Overshoot: 5 - 10°CAuto-reset below the openingtemperature as indicated.

AD044 60°CAD045 70°CAC583 80°CAD046 100°CAD047 120°CAB688 140°CAD048 160°C

GAS TUBE ARRESTORS

Note: Gas tube arresters are

designed with surge limiting volt-age characteristics within adefined level. Circuits, equip-ment, and personnel are protect-ed from abnormally high tran-sient voltage caused by light-ning, accidental contact withpower lines, or electromagneticinduction by the sparkover thatoccurs in the gas chamber at thegiven voltage.

DB728 Gas tube arrestor single 90V axial

AC489 Gas tube arrestor double 90Vradial 3 pins

FB247 Gas tube arrestor double 350Vradial 3 pins

METAL OXIDE VARISTORS(MOV)

Note: Disc type varistors - radialleaded, for overvoltage protec-tion in a wide range of applica-tions typically installed in PCboards.Benefits:Eliminates Dangerous VoltageTransientsLowers Overall System Costs byReducing Downtime andMaintenance CostsImproves Component andSystem ReliablityReduces Lightening EffectsReduces EMP/RFI InterferencePromotes Personal SafetyFeatures:Nanosec. Switching ResponseTime, High Transient Current Capability(up to 100,000 Amps)No Extinguishing or Follow-onCurrent LimitationsSmall Size for Compact DesignsWide Operating TemperatureRange -40 to +85 degrees CExcellent ClampingCharacteristicsLow Standby PowerConsumptionTolerance: ±10%

AA305 MOV Suppressor 11VAC 14VDC18V@1mA 11mm dia., 7mm pitch

07.33

FB239 MOV Suppressor 14VAC 18VDC22V@1mA 15mm dia., 7.5mm pitch

FB474 MOV Suppressor 17VAC 22VDC27V@1mA 8mm dia., 5mm pitch

AD085 MOV Suppressor 17VAC 22VDC27V@1mA 11mm dia., 7.5mm pitch

FB472 MOV Suppressor 17VAC 22VDC27V@1mA 15mm dia., 7.5mm pitch






AD091 MOV Suppressor 50VAC 65VDC82V@1mA 8mm dia., 5mm pitch


AD093 MOV Suppressor 130VAC 170VDC205V@1mA 15mm dia. 7.5mm pitch


EB349 MOV Suppressor 250VAC 320VDC390V@1mA 8mm dia., 5mm pitch

FB242 MOV Suppressor 250VAC 320VDC390V@1mA 11mm dia. 7.5mm pitch

AA306 MOV Suppressor 250VAC 320VDC390V@1mA 15mm dia. 7.5mm pitch


AA307 MOV Suppressor 275VAC 350VDC430V@1mA 15mm dia. 7.5mm pitch

FB241 MOV Suppressor 300VAC 385VDC470V@1mA 15mm dia. 7.5mm pitch



TRANSIENT VOLTAGESUPPRESSOR DIODES

UNIDIRECTIONAL TYPE600W PEAK PULSE POWER

Note: These are axially leaded,unidirectional, very fast actingtransient voltage suppressordiodes. Its electrical characteris-tics are similar to those of azener diode. It is used for over-voltage protection by means of avoltage clamping action. It willfail when the power or pulse cur-rent rating is exceeded. Thecolour band is closest to thecathode lead.Dimensions of Central Part:

3.1mm diameter x 6.7mm lengthSteady State Power Rating: 5WattPeak Forward Voltage: 3.5V / 50ABreakdown Voltage: VbrVbr Tolerance: ±5%No Surge, Stand-off Voltage: VsoClamping Voltage: VcPeak Pulse Current: IppSurge Pulse Current: 10µs rise

time to reach a maximum currentof Ipp, then current must reduceto half Ipp within 1msec or less.

AD157 6.8V Bidirec. Transient SuppressorVbr 6.45-7.14Vdc@10mA, Vso 5.8VVc 10.5V@ Ipp 60A

AD158 15V Bidirec. Transient SuppressorVbr 14.3-15.8Vdc@1mA, Vso 12.8VVc 21.2V@ Ipp 29A


AD160 27V Bidirec. Transient SuppressorVbr 25.7-28.4Vdc@1mA, Vso 23.1VVc 37.5V@ Ipp 16.8A




AD164 200V Bidirec. Transient SuppressorVbr 190-210Vdc@1mA, Vso 171VVc 274V@ Ipp 2.2A

BIDIRECTIONAL TYPE1500W PEAK PULSE POWER

Note: These are axially leaded,bidirectional, fast acting transientvoltage suppressor diodes. It hasthe same electrical characteris-tics in both directions. It is usedfor overvoltage protection bymeans of a voltage clampingaction. It will fail, becoming apermanent short-circuit, whenthe power or pulse current ratingis exceeded.Dimensions of Central Part:

5.4mm diameter x 9.5mm lengthBreakdown Voltage: VbrVbr Tolerance: ±5%No Surge, Stand-off Voltage: VsoClamping Voltage: VcPeak Pulse Current: IppSurge Pulse Current: 10µs risetime to reach a maximum currentof Ipp, then current decreases tohalf Ipp within 1msec or less.

AD136 6.8V Bidirec. Transient SuppressorVbr 6.45-7.14Vdc@10mA, Vso 5.8VVc 10.5V@ Ipp 150A





AD141 24V Bidirec. Transient SuppressorVbr 22.8-25.2Vdc@1mA, Vso 20.5V

Vc 33.2V@ Ipp 45AAD142 27V Bidirec. Transient Suppressor

Vbr 25.7-28.4Vdc@1mA, Vso 23.1VVc 37.5V@ Ipp 40A





AD147 350V Bidirec. Transient SuppressorVbr 332-368Vdc@1mA, Vso 299VVc 482V@ Ipp 3.2A

PASSIVECOMPONENTS

INDUCTORS

SMD SHIELDED INDUCTORS

Note: These are SMD, shielded,high frequency, inductors. It hasan enameled wire winding on aferrite core and enclosed inside aferrite housing. It is used for lowpower DC/DC converters.Width: W = 12.7mmHeight: HRMS AC Current: IrmsDC Saturation Current: IsatSelf Resonant Frequency: SRF

AD185 47µH, H=6.5mm, SRF 7MHz minIrms 1.25A max., Isat 2.5A max.

AD186 56µH H=8.5mm, SRF 16MHz minIrms 1.9A max., Isat 2.8A max.

AD187 220µH H=5.5mm, SRF 3MHz minIrms 0.65A max., Isat 1.3A max.

AXIAL INDUCTORS

Note: High frequency chokeswith a copper-wire winding on aferrite core. Colour coded.Tolerance: ±10%Dimensions of Central Part:

4mm diameter x 10.5mm lengthRMS AC Current: IrmsHelpful Tip:1000nH = 1µH1000µH = 1mH

07.34

DB410 100nH, Irms 630mA max.DB411 150nH, Irms 620mA max.DB412 220nH, Irms 620mA max.AB490 270nH, Irms 560mA max.DB413 330nH, Irms 530mA max.AB491 390nH, Irms 480mA max.DB414 470nH, Irms 450mA max.DB415 680nH, Irms 380mA max.DB416 820nH, Irms 690mA max.DB417 1µH, Irms 650mA max.DB418 1.5µH, Irms 580mA max.DB419 1.8µH, Irms 550mA max.DB420 2.2µH, Irms 530mA max.DB421 3.3µH, Irms 470mA max.DB422 3.9µH, Irms 480mA max.DB423 4.7µH, Irms 430mA max.DB424 5.6µH, Irms 410mA max.DB425 6.8µH, Irms 380mA max.DB426 8.2µH, Irms 370mA max.DB427 10µH, Irms 350mA max.DB428 15µH, Irms 320mA max.DB429 18µH, Irms 300mA max.DB430 22µH, Irms 280mA max.DB431 33µH, Irms 260mA max.DB432 39µH, Irms 240mA max.DB433 47µH, Irms 240mA max.DB434 56µH, Irms 220mA max.DB435 68µH, Irms 210mA max.DB436 82µH, Irms 200mA max.DB437 100µH, Irms 190mA max.DB438 150µH, Irms 120mA max.DB439 180µH, Irms 110mA max.DB440 220µH, Irms 100mA max.DB441 330µH, Irms 90mA max.DB442 390µH, Irms 90mA max.DB443 470µH, Irms 120mA max.DB444 560µH, Irms 80mA max.DB445 680µH, Irms 80mA max.DB446 820µH, Irms 70mA max.DB447 1mH, Irms 70mA max.AB492 1.5mH, Irms 40mA max.AB493 2.2mH, Irms 40mA max.AB494 3.3mH, Irms 30mA max.AB495 4.7mH, Irms 20mA max.GB227 10mH, Irms 10mA max.

TOROIDAL INDUCTORS

Note: These are linear, high fre-quency, RF chokes. Wire woundon toroidal core. They are indis-pensable in the field of powerelectronics. It is used for mainsfilters in power supplies, controlof DC or stepper motors, chop-per amplifiers etc. Indicated outer dimensions:

diameter x thicknessRMS AC Current: Irms

AB504 50µH, 26x11mm, Irms 3.5A max.GB243 100µH, 23x9mm, Irms 2.8A max.AB505 100µH, 30x13mm, Irms 3.5A max.AB506 220µH, 43x17mm, Irms 3.5A max.AB507 470µH, 48x20mm, Irms 3.5A max.AB508 1mH, 35x15mm, Irms 1.7A max.AD226 1.4mH, 24x12.5mm, Irms 1.7A max.AB509 2.2mH, 27x12mm, Irms 0.7A max.AD227 2.3mH, 15.5x8mm, Irms 2.1A max.

FERRITE BAR INDUCTORS

GB294 Coil & Ferrite Bar set for Radio(DIY Kit 63)

INDUCTORS AND CHOKES 50pcs

AB639

A mixed pack that contains 50 inductors andRF chokes.

ORDER CODE: AB639

CAPACITORS

ELECTROLYTIC CAPACITORS(RADIAL)

Note: These Electrolytic capaci-tors are suitable for use on print-ed circuit boards. These capaci-tors are polarity sensitive. Thelonger lead is positive (anode)and the shorter lead is negative(cathode). Operating tempera-ture: -25 to +85ºC. Surge voltageis 25% higher than rated workingvoltage. Tolerance: ±20%.Leakage current: 0.02xCxV+3µA.Helpful Tip:1000nF = 1µF1000µF = 1mF

16VHB183 10µF HB188 470µFHB184 22µF HB189 1000µFHB211 33µF HB190 2200µFHB185 47µF HB215 3300µFHB186 100µF HB191 4700µFHB187 220µF AC310 6800µFHB213 330µF AC482 10mF

25VHB245 10µF HB252 470µFHB246 22µF HB253 1000µFHB247 33µF HB254 2200µFHB248 47µF HB255 3300µFHB249 100µF HB256 4700µFHB250 220µF AC311 6800µFHB251 330µF AC483 10mF

35VHB196 10µF HB201 470µFHB197 22µF HB202 1000µFHB212 33µF HB203 2200µFHB198 47µF HB216 3300µFHB199 100µF HB204 4700µFHB200 220µF AC484 10mFHB214 330µF

50VHB192 0.47µF HB221 100µFHB193 1µF HB222 220µFHB194 2.2µF HB223 330µFHB274 3.3µF HB224 470µFHB195 4.7µF HB225 1000µFHB217 10µF HB226 2200µFHB218 22µF HB227 3300µFHB219 33µF HB228 4700µFHB220 47µF AB343 10mF

63VHB244 0.47µF HB233 100µFHB179 1µF HB234 220µFHB180 2.2µF HB235 330µFHB181 3.3µF HB236 470µFHB182 4.7µF HB237 1000µFHB229 10µF HB238 2200µFHB230 22µF MB083 3300µFHB231 33µF MB084 4700µFHB232 47µF FB461 10mF

100VHB275 0.47µF HB283 47µFHB276 1µF HB284 100µFHB277 2.2µF HB285 220µFHB278 3.3µF HB286 330µFHB279 4.7µF HB287 470µFHB280 10µF MB102 1000µFHB281 22µF MB103 2200µFHB282 33µF

160VAC306 100µF

250VHB370 1µF HB374 47µFAC485 2.2µF HB375 100µFAC486 4.7µF HB376 220µFHB371 10µF HB377 330µFHB372 22µF HB378 470µFHB373 33µF AA786 1000µF

350VJB206 1µF AC308 22µFJB207 2.2µF JB209 33µFAC309 3.3µF JB210 47µFJB208 4.7µF JB211 100µFAC307 10µF

400VAC487 330µFAC488 470µF

450VHB379 1µF HB272 33µFHB380 2.2µF HB383 47µFHB381 10µF HB384 100µFHB382 22µF HB385 220µF

07.35

LOW IMPEDANCEELECTROLYTIC CAPACITORS

(RADIAL)

Note: These capacitors have alow impedance: low ESR (equiva-lent series resistance). It has along operating life. It is used forswitching power supplies andhigh frequency applications.Tolerance: ±20% at 120Hz, 20ºCTemperature Range:

-40 to +105ºCMaximum impedance is indicatedat 20ºC, 100kHzMaximum RMS ripple current isindicated at 105ºC, 100kHzDimensions: diameter x length

63VAC931 1µF, 5.3x12mmAC932 2.2µF, 5.3x12mmAC933 4.7µF, 2 Ohm, 65mA, 5.3x12mmAC934 10µF, 1.75 Ohm, 0.1A, 5.3x12mmAC935 22µF, 0.8 Ohm, 0.2A, 6.3x12mmAC936 33µF, 0.14A, 6.3x12mmAC937 47µF, 0.56 Ohm, 0.3A, 8x12mmAC938 100µF, 0.3A, 10x13mmAC939 220µF, 0.08 Ohm, 0.7A, 10x21mmAC940 330µF, 0.055 Ohm, 1.2A, 13x21mmAC941 470µF, 0.053 Ohm, 1.6A, 13x26mmAC942 1000µF, 0.05 Ohm, 2.9A, 16x31mm

50VAD098 2200µF, 0.032 Ohm, 3A, 18x36mm

35VAD099 3300µF, 0.02 Ohm, 2.6A, 16x36mm

25VAD100 4700µF, 0.02 Ohm, 2.9A, 18x36mm

HIGH CAPACITANCEELECTROLYTIC CAPACITORS

(RADIAL)

Note: These capacitors have ahigh capacitance-to-volume ratio.Protected against rapid chargingand discharging. The aluminium

case is fully insulated. A safetyvent is located in the bottom ofthe case. Used for switchingpower supplies, power storagefor digital equipment, energystorage in pulse systems andelectric filters.Temperature Range: -55 to +85ºCTolerance: 20%

40VAC329 4700µFAC330 10 000µFAC331 15 000µF

63VAC332 4700µFAC333 10 000µF

100VAC334 1000µFAC335 10 000µF

ELECTROLYTIC CAPACITOR PACK50 PIECES

AB632

A mixed pack that contains 50 electrolyticcapacitors.

ORDER CODE: AB632

ELECTROLYTIC CAPACITORS(AXIAL)

16VEB756 100µF EB762 1000µFEB769 220µF EB778 2200µFEB783 330µF EB799 4700µFEB790 470µF

25VEB774 22µF EB791 470µFEB796 47µF EB763 1000µFEB757 100µF EB779 2200µFAB895 220µF EB787 3300µFEB784 330µF EB800 4700µF

35VAB892 10µF EB792 470µFEB775 22µF EB764 1000µFAB901 47µF EB780 2200µFEB758 100µF EB788 3300µFEB771 220µF EB801 4700µF

50VEB797 47µF EB765 1000µFEB759 100µF EB781 2200µFEB772 220µF EB802 4700µFEB793 470µF

63VEB767 1µF EB760 100µFEB768 2.2µF EB773 220µFEB789 4.7µF EB785 330µFEB761 10µF EB794 470µFEB776 22µF EB766 1000µFEB786 33µF EB782 2200µFEB798 47µF EB803 4700µF

100VAB894 1µF AB898 22µFAB899 2.2µF AB902 47µFAB903 4.7µF EB755 100µFAB893 10µF AB896 220µF

250VAB897 220µF

350VAB900 2.2µF

DOUBLE LAYER, RADIAL,ENERGY STORAGE CAPACITORS

Note: These capacitors have ahigh capacitance-to-volume ratio.It can be used as a short-term,back-up, voltage supply for lowpower, digital circuits. Thesecapacitors are polarity sensitive.Voltage Rating: 5.5Vdc max.Temperature Rating: 70ºC max.Pin Spacing: 5mm

AC825 47mF (that is 47 000µF) / 5.5Vdcleakage current: 30 - 69µAinternal resistance: 120 Ohm / 1kHz13mm diameter, 7mm height

AC826 1F (that is 1 000 000µF) / 5.5Vdcleakage current: 30 - 315µAinternal resistance: 30 Ohm / 1kHz21mm diameter, 7.5mm height

NON-POLARISEDELECTROLYTIC CAPACITORS

Note: These capacitors are notpolarity sensitive

100VAA651 1µF AA654 4.7µFAA652 2.2µF AA655 10µFAA653 3.3µF AA656 22µF

63VAA657 33µF AA659 100µFAA658 47µF AA660 220µF

07.36

TANTALUM CAPACITORS

Note: These capacitors have alow leakage current and imped-ance, very small physical sizeand exceptional temperature sta-bility. These capacitors are polar-ity sensitive. The longer lead ispositive (anode) and the shorterlead is negative (cathode).Suitable for coupling andbypassing, filters, timing circuitsand general applications.Tolerance: ±20%.

16VDB285 2.2µF DB289 22µFDB286 3.3µF DB290 33µFDB287 4.7µF DB291 47µFDB288 10µF DB292 100µFAC364 15µF

35VDB273 0.1µF DB279 3.3µFAC362 0.15µF DB280 4.7µFDB274 0.22µF AC367 6.8µFDB275 0.33µF DB281 10µFDB276 0.47µF AC365 15µFAC363 0.68µF DB282 22µFDB277 1µF DB283 33µFAC366 1.5µF DB284 47µFDB278 2.2µF

TANTALUM CAPACITOR PACK100 PIECES

AB652

A mixed pack that contains 100 tantalumcapacitors.

ORDER CODE: AB652

CERAMIC CAPACITORS

SMD 1µF 16V CAPACITORCASE SIZE 1206

AC929 1uF 16V SMD ceramic capacitor

SMD 10µF 16V CAPACITORCASE SIZE 1210

AC930 10uF 16V SMD ceramic capacitor

THROUGH-HOLE CAPACITORS

Note: These are general purpose,cement coated, ceramic disc andmultilayer (monolithic) capacitorswith small case sizes. The valueslarger than 100nF are multilay-ered capacitors. These capaci-tors are not polarity sensitive.Tolerance: -20 and +85%

Helpful Tips:Coding: Write down the first twodigits of the code. After this twodigits append the number ofzeros that is indicated by thethird digit of the code. The unit ispF (pico Farad).Capacitor Code : Capacitance

‘10’ or ‘100’: 10pF‘101’: 100pF‘102’: 1000pF = 1nF‘103’: 10 000pF = 10nF

‘104’: 100 000pF = 100nF‘105’: 1000 000pF = 1µF

Example:‘330’ = 33pF and ‘331’ = 330pF

DISK TYPE CAPACITORS 50VAC341 1pF AA465 390pFAA450 1.8pF DB188 470pFAA451 2.2pF DB189 560pFAA452 2.7pF AA466 680pFDB175 3.3pF DB190 820pFAA453 3.9pF DB191 1nFAA454 4.7pF AA467 1.2nFDB176 5.6pF AA468 1.5nFAA455 6.8pF DB192 1.8nFDB177 8.2pF DB193 2.2nFAC275 9pF AA469 2.7nFDB178 10pF DB194 3.3nFAA456 12pF AA470 3.9nFAA457 15pF DB195 4.7nFAA458 18pF DB196 5.6nFDB179 22pF AC273 6.8nFAA459 27pF AC274 8.2nFDB180 33pF DB197 10nFAA460 39pF AC342 12nFDB181 47pF AC343 15nFDB182 56pF AC344 18nFAA461 68pF DB198 22nFAA462 82pF AC270 27nFDB183 100pF DB199 33nFAA463 120pF AC271 39nF

DB184 150pF DB200 47nFDB185 180pF AC272 56nFDB186 220pF DB201 68nFAA464 270pF DB202 100nFDB187 330pF

MULTILAYER TYPE CAPACITORS50V

AC475 1nF AC336 100nFAC476 2.2nF DB203 150nFAC477 3.3nF DB204 220nFAC478 4.7nF DB205 330nFAC337 10nF DB206 470nFAC338 22nF GB568 680nFAC339 33nF GB569 820nFAC340 47nF GB570 1µFAC479 68nF AC928 3.3µF

DISK TYPE CAPACITORS 1000VGB320 270pF AA615 10nFAA614 1nF FB235 22nF

DISK TYPE CAPACITORS 3000VAD252 4.7nFAD253 10nF

Blister pack that contains 10 ceramic capaci-tors of 100nF 50V: 10 x (DB202).

ORDER CODE: AB758

CERAMIC CAPACITOR PACK 100pcs

AB635

A mixed pack that contains 100 ceramiccapacitors.

ORDER CODE: AB635

POLYESTER CAPACITORS

Note: Operating Temperature: -55to +100°C (above 85% voltage

07.37

factor 1.25% per °C) Thesecapacitors are not polarity sensi-tive.Capacitance Tolerance: ±10%

63VDB257 1nF DB266 68nFAC250 1.5nF DB267 100nFDB258 2.2nF AC347 150nFDB259 3.3nF DB268 220nFDB260 4.7nF DB269 330nFDB261 6.8nF DB270 470nFDB262 10nF DB271 680nFAC346 15nF AC324 820nFDB263 22nF DB272 1µFDB264 33nF AC348 1.5µFDB265 47nF AC315 2.2µF

100VAA159 1nF AA777 150nFAC345 1.5nF AA170 220nFAA160 2.2nF AA171 330nFAA161 3.3nF AC254 390nFAA162 4.7nF AA172 470nFAA163 6.8nF AA173 680nFAA164 10nF AA174 1µFAC349 15nF AC316 1.5µFAA165 22nF GB238 2.2µFAA166 33nF GB410 3.3µFAA167 47nF AC322 4.7µFAA168 68nF AC242 6.8µFAA169 100nF

250VAC350 15nF DB480 330nFDB472 22nF AA779 390nFAC352 33nF DB491 470nFDB473 47nF DB482 680nFAA778 56nF DB475 1µFDB474 68nF AC243 1.5µFAC255 82nF AC326 2.2µFDB489 100nF AC244 3.3µFAC351 150nF AC245 4.7µFDB490 220nF

400VAA503 1nF AA781 33nFAC251 1.2nF DB477 47nFAC312 1.5nF AC323 82nFAA489 2.2nF DB478 100nFAC252 2.7nF DB699 150nFAC313 3.3nF DB479 220nFAC256 3.9nF AC328 330nFAA504 4.7nF AC321 390nFAC314 6.8nF DB481 470nFDB698 10nF EB140 680nFAC253 12nF AA616 1µFAC353 15nF AC248 1.5µFAA780 18nF AC249 2.2µFDB476 22nF

630VDB483 10nF DB487 220nFDB484 22nF AC327 330nFAA782 33nF GB329 470nFDB485 47nF AC247 680nFAC320 68nF AC246 1µFDB486 100nF GB321 2.2µFAC318 150nF

1000VAC319 33nF

250VACAD128 1nF AD135 47nFAD129 2.2nF AD188 68nFAD130 3.3nF HB239 100nFAD131 6.8nF HB240 220nFAD132 10nF FB475 330nFAD133 22nF HB241 470nFAD134 33nF HB242 1µF

POLYPROPYLENE FILMCAPACITORS

Note: Operating Temperature:-55 to +100°CThese capacitors are not polaritysensitive.Capacitance Tolerance: ±20%

63VAD179 3.3nFAD180 4.7nFAD181 6.8nF

100VAD171 100pF AD175 680pFAD172 220pF AD176 1nFAD173 330pF AD177 1.5nFAD174 470pF AD178 2.2nF

630VAC263 22nF AC259 220nFAC262 47nF AC260 470nFAC258 100nF AC261 1µF

1250VAC264 100nF

1600VAB521 470pF AD240 47nFAB524 2.2nF

2000VAB522 680pF AB527 4.7nFAB523 1nF AB528 6.8nFAB525 1.5nF AB529 10nFAB526 3.3nF

FOIL CAPACITORS 100pcs

AB655

A mixed pack that contains 100 foil typecapacitors.

ORDER CODE: AB655

TRIMMER CAPACITORS

Note: Miniature single turn trim-mer capacitors that are suitablefor mounting directly onto a PCB(printed circuit board). It can betrimmed with a ceramic adjusterof set (AD017).Dimensions: 5mm lead pitch6mm diameter x 5mm heightDielectric: ceramicVoltage Rating: 100Vdc max.

GB256 4.2pF to 20pF, red

GB162 6.8pF to 40pF, yellowHB386 10pF to 150pF, black

Note: Miniature single turn trim-mer capacitors that are suitablefor mounting directly onto a PCB.It can be trimmed with a ceramicadjuster of set (AD017).Dielectric: polypropylene film

HB205 1.4pF to 10pF, yellow5.5mm diameter x 6.8mm heightVoltage Rating: 150Vdc max.

AC266 2pF to 10pF, yellow7.6mm diameter x 10mm heightVoltage Rating: 250Vdc max.

HB206 2pF to 22pF, green7.6mm diameter x 10mm heightVoltage Rating: 100Vdc max.

AC267 3.3pF to 33pF, brown7.6mm diameter x 10mm heightVoltage Rating: 250Vdc max.

AC268 5.5pF to 40pF, grey10mm diameter x 11mm heightVoltage Rating: 250Vdc max.

HB207 5.5pF to 65pF, yellow10mm diameter x 11mm heightVoltage Rating: 250Vdc max.

AC269 5.5pF to 80pF, red10mm diameter x 11mm heightVoltage Rating: 250Vdc max.

AC265 7pF to 100pF, violet10mm diameter x 11mm heightVoltage Rating: 250Vdc max.

GB289 60/160 pF AM/FM TuningCapacitor, 3 pins, 2 trimmers

GB290 Screw for Tuning Capacitor(GB289), (2 required)

GB291 13mm Brass Extension for TuningCapacitor (GB289)

07.38

GB292 Screw for Knob/Extension ofTuning Capacitor (GB289)

TRIMMER CAPACITORS 20pcs

AB640

A mixed pack that contains 20 trimmercapacitors.

ORDER CODE: AB640

RESISTORS

SMD 0.25W 1% RESISTORSCASE SIZE 1206

AC781 1k (resistor coding: 1001)

REEL OF SMD RESISTORS5000pcs

A reel of 1k Ohm 0.25W 1% SMD (surfacemount device) resistors. Resistor case size1206. One reel contains 5000 SMD resistors.

ORDER CODE: AC780

THROUGH-HOLE RESISTORS

RESISTOR PACK 200PCS

AB624

A mixed pack that contains 200 resistors.ORDER CODE: AB624

CARBON FILM 0.125 (1/8)W 5%

EB040 1E EB084 4.7kEB041 1.2E EB085 5.6kEB042 1.5E EB086 6.8kEB043 1.8E EB087 8.2kEB044 2.2E EB088 10kEB045 2.7E EB089 12kEB046 3.3E EB090 15kEB047 3.9E EB091 18kEB048 4.7E EB092 22kEB049 5.6E EB093 27kEB050 6.8E EB094 33kEB051 8.2E EB095 39kEB052 10E EB096 47kEB053 12E EB097 56kEB054 15E EB098 68kEB055 18E EB099 82kEB056 22E EB100 100kEB057 27E EB101 120kEB058 33E EB102 150kEB059 39E EB103 180kEB060 47E EB104 220kEB061 56E EB105 270kEB062 68E EB106 330kEB063 82E EB107 390kEB064 100E EB108 470kEB065 120E EB109 560kEB066 150E EB110 680kEB067 180E EB111 820kEB068 220E EB112 1MEB069 270E EB113 1.2MEB070 330E EB114 1.5MEB071 390E EB115 1.8MEB072 470E EB116 2.2MEB073 560E EB117 2.7MEB074 680E EB118 3.3MEB075 820E EB119 3.9MEB076 1k EB120 4.7MEB077 1.2k EB121 5.6MEB078 1.5k EB122 6.8MEB079 1.8k EB123 8.2MEB080 2.2k EB124 10MEB081 2.7k EB125 12MEB082 3.3k EB126 15MEB083 3.9k


AC368 0E DB063 3.9kDB020 1E DB064 4.7kDB021 1.2E DB065 5.6kDB022 1.5E DB066 6.8kDB023 1.8E DB067 8.2kDB024 2.2E DB068 10kDB025 2.7E DB069 12kDB026 3.3E DB070 15kDB027 3.9E DB071 18kDB028 4.7E DB072 22kDB029 5.6E DB073 27kDB030 6.8E DB074 33kDB031 8.2E DB075 39kDB032 10E DB076 47kDB033 12E DB077 56kDB034 15E DB078 68kDB035 18E DB079 82kDB036 22E DB080 100kDB037 27E DB081 120kDB038 33E DB082 150kDB039 39E DB083 180kDB040 47E DB084 220kDB041 56E DB085 270kDB042 68E DB086 330kDB043 82E DB087 390kDB044 100E DB088 470kDB045 120E DB089 560kDB046 150E DB090 680kDB047 180E DB091 820kDB048 220E DB092 1M

DB049 270E DB093 1.2MAC369 300E DB094 1.5MDB050 330E DB095 1.8MDB051 390E DB096 2.2MDB052 470E DB097 2.7MDB053 560E DB098 3.3MDB054 680E DB099 3.9MDB055 820E DB100 4.7MDB056 1k DB101 5.6MDB057 1.2k DB102 6.8MDB058 1.5k DB103 8.2MDB059 1.8k DB104 10MDB060 2.2k AA957 12MDB061 2.7k DB105 15MDB062 3.3k

Blister pack that contains 100 resistors of220 Ohm 1/4W 5%: 100 x (DB048).

ORDER CODE: AB763

Blister pack that contains 100 resistors of1k Ohm 1/4W 5%: 100 x (DB056).

ORDER CODE: AB757

Blister pack that contains 100 resistors of

07.39

10k Ohm 1/4W 5%: 100 x (DB068).ORDER CODE: AB759

AB311 Resistor Pack (480 resistors)16 values x 30 each 1/4W 5%E3-series carbon film 10E to 1M

AB312 Resistor Pack (610 resistors)61 values x 10 each 1/4W 5%E12-series carbon film 10E to 1M

METAL FILM 0.25 (1/4)W 1%

KB001 1.0E KB086 3.6kKB002 1.1E KB087 3.9kKB003 1.2E KB088 4.3kKB004 1.3E KB089 4.7kKB005 1.5E KB090 5.1kKB006 1.6E KB091 5.6kKB007 1.8E KB092 6.2kKB008 2.0E KB093 6.8kKB009 2.2E KB094 7.5kKB010 2.4E KB095 8.2kKB011 2.7E KB096 9.1kKB012 3.0E KB097 10kKB013 3.3E KB098 11kKB014 3.6E KB099 12kKB015 3.9E KB100 13kKB016 4.3E KB101 15kKB017 4.7E KB102 16kKB018 5.1E KB103 18kKB019 5.6E KB104 20kKB020 6.2E KB105 22kKB021 6.8E KB106 24kKB022 7.5E KB107 27kKB023 8.2E KB108 30kKB024 9.1E KB109 33kKB025 10E KB110 36kKB026 11E KB111 39kKB027 12E KB112 43kKB028 13E KB113 47kKB029 15E KB114 51kKB030 16E KB115 56kKB031 18E KB116 62kKB032 20E KB117 68kKB033 22E KB118 75kKB034 24E KB119 82kKB035 27E KB120 91kKB036 30E KB121 100kKB037 33E KB122 110kKB038 36E KB123 120kKB039 39E KB124 130kKB040 43E KB125 150k

KB041 47E KB126 160kKB042 51E KB127 180kKB043 56E KB128 200kKB044 62E KB129 220kKB045 68E KB130 240kKB046 75E KB131 270kKB047 82E KB132 300kKB048 91E KB133 330kKB049 100E KB134 360kKB050 110E KB135 390kKB051 120E KB136 430kKB052 130E KB137 470kKB053 150E KB138 510kKB054 160E KB139 560kKB055 180E KB140 620kKB056 200E KB141 680kKB057 220E KB142 750kKB058 240E KB143 820kKB059 270E KB144 910kKB060 300E KB145 1.0MKB061 330E KB146 1.1MKB062 360E KB147 1.2MKB063 390E KB148 1.3MKB064 430E KB149 1.5MKB065 470E KB150 1.6MKB066 510E KB151 1.8MKB067 560E KB152 2.0MKB068 620E KB153 2.2MKB069 680E KB154 2.4MKB070 750E KB155 2.7MKB071 820E KB156 3.0MKB072 910E KB157 3.3MKB073 1.0k KB158 3.6MKB074 1.1k KB159 3.9MKB075 1.2k KB160 4.3MKB076 1.3k KB161 4.7MKB077 1.5k KB162 5.1MKB078 1.6k KB163 5.6MKB079 1.8k KB164 6.2MKB080 2.0k KB165 6.8MKB081 2.2k KB166 7.5MKB082 2.4k KB167 8.2MKB083 2.7k KB168 9.1MKB084 3.0k KB169 10MKB085 3.3k

METAL FILM 0.6W 5%

AC390 1E AC433 3.9kAC391 1.2E AC434 4.7kAC392 1.5E AC435 5.6kAC393 1.8E AC436 6.8kAC394 2.2E AC437 8.2kAC395 2.7E AC438 10kAC396 3.3E AC439 12kAC397 3.9E AC440 15kAC398 4.7E AC441 18kAC399 5.6E AC442 22kAC400 6.8E AC443 27kAC401 8.2E AC444 33kAC402 10E AC445 39kAC403 12E AC446 47kAC404 15E AC447 56kAC405 18E AC448 68kAC406 22E AC449 82kAC407 27E AC450 100kAC408 33E AC451 120kAC409 39E AC452 150kAC410 47E AC453 180kAC411 56E AC454 220kAC412 68E AC455 270kAC413 82E AC456 330kAC414 100E AC457 390kAC415 120E AC458 470kAC416 150E AC459 560kAC417 180E AC460 680kAC418 220E AC461 820kAC419 270E AC462 1MAC420 330E AC463 1.2MAC421 390E AC464 1.5M

AC422 470E AC465 1.8MAC423 560E AC466 2.2MAC424 680E AC467 2.7MAC425 820E AC468 3.3MAC426 1k AC469 3.9MAC427 1.2k AC470 4.7MAC428 1.5k AC471 5.6MAC429 1.8k AC472 6.8MAC430 2.2k AC473 8.2MAC431 2.7k AC474 10MAC432 3.3k


AA073 1E AA117 4.7kAA074 1.2E AA118 5.6kAA075 1.5E AA119 6.8kAA076 1.8E AA120 8.2kAA077 2.2E AA121 10kAA078 2.7E AA122 12kAA079 3.3E AA123 15kAA080 3.9E AA124 18kAA081 4.7E AA125 22kAA082 5.6E AA126 27kAA083 6.8E AA127 33kAA084 8.2E AA128 39kAA085 10E AA129 47kAA086 12E AA130 56kAA087 15E AA131 68kAA088 18E AA132 82kAA089 22E AA133 100kAA090 27E AA134 120kAA091 33E AA135 150kAA092 39E AA136 180kAA093 47E AA137 220kAA094 56E AA138 270kAA095 68E AA139 330kAA096 82E AA140 390kAA097 100E AA141 470kAA098 120E AA142 560kAA099 150E AA143 680kAA100 180E AA144 820kAA101 220E AA145 1MAA102 270E AA146 1.2MAA103 330E AA147 1.5MAA104 390E AA148 1.8MAA105 470E AA149 2.2MAA106 560E AA150 2.7MAA107 680E AA151 3.3MAA108 820E AA152 3.9MAA109 1k AA153 4.7MAA110 1.2k AA154 5.6MAA111 1.5k AA155 6.8MAA112 1.8k AA156 8.2MAA113 2.2k AA157 10MAA114 2.7k AA958 12MAA115 3.3k AA158 15MAA116 3.9k AA285 18M

CARBON FILM 1W 5%

DB110 1E DB124 4.7kDB348 1.2E DB378 5.6kDB349 1.5E DB125 6.8kDB350 1.8E DB379 8.2kDB111 2.2E DB126 10kDB351 2.7E DB380 12kDB352 3.3E DB381 15kDB353 3.9E DB382 18kDB112 4.7E DB127 22kDB354 5.6E DB383 27kDB113 6.8E DB384 33kDB355 8.2E DB385 39kDB114 10E DB128 47kDB356 12E DB386 56kDB357 15E DB129 68kDB358 18E DB387 82kDB115 22E DB130 100k

07.40

DB359 27E DB388 120kDB360 33E DB389 150kDB361 39E DB390 180kDB116 47E DB131 220kDB362 56E DB391 270kDB117 68E DB392 330kDB363 82E DB393 390kDB118 100E DB132 470kDB364 120E DB394 560kDB365 150E DB133 680kDB366 180E DB395 820kDB119 220E DB134 1MDB367 270E AA332 1.2MDB368 330E AA333 1.5MDB369 390E AA334 1.8MDB120 470E AA335 2.2MDB370 560E AA336 2.7MDB121 680E AA337 3.3MDB371 820E AA338 3.9MDB122 1k AA339 4.7MDB372 1.2k AA340 5.6MDB373 1.5k AA341 6.8MDB374 1.8k AA342 8.2MDB123 2.2k AA343 10MDB375 2.7k AC370 18MDB376 3.3k AC371 22MDB377 3.9k

CARBON FILM 5W 5%GB505 10k GB506 22k

WIRE-WOUND 5W 5%

DB135 0.1E DB338 56EDB316 0.12E DB146 68EDB317 0.15E DB339 82EDB318 0.18E DB147 100EDB136 0.22E DB340 120EDB319 0.27E DB341 150EDB320 0.33E DB342 180EDB321 0.39E DB148 220EDB137 0.47E DB343 270EDB322 0.56E DB344 330EDB138 0.68E DB345 390EDB323 0.82E DB149 470EDB139 1E DB346 560EDB324 1.2E DB150 680EDB325 1.5E DB347 820EDB326 1.8E DB151 1kDB140 2.2E AA322 1.2kDB327 2.7E AA323 1.5kDB328 3.3E AA324 1.8kDB329 3.9E AA325 2.2kDB141 4.7E AA326 2.7kDB330 5.6E AA320 3.3kDB142 6.8E AA327 3.9kDB331 8.2E AA328 4.7kDB143 10E AA329 5.6kDB332 12E AA330 6.8kDB333 15E AA331 8.2kDB334 18E AA321 10kDB144 22E AC372 12kDB335 27E AC373 15kDB336 33E AC374 18kDB337 39E AC375 22kDB145 47E

WIRE-WOUND 10W 5%

DB493 0.1E DB526 56EAC376 0.12E DB527 68EDB495 0.15E DB528 82EDB496 0.18E DB529 100EDB497 0.22E AC378 120EDB498 0.27E DB531 150EDB499 0.33E DB532 180EDB500 0.39E DB533 220EDB501 0.47E DB534 270EDB502 0.56E DB535 330E

DB503 0.68E DB536 390EDB504 0.82E DB537 470EDB505 1E DB538 560EAC383 1.2E DB539 680EDB507 1.5E DB540 820EDB508 1.8E DB541 1kDB509 2.2E AC384 1.2kDB510 2.7E DB543 1.5kDB511 3.3E DB544 1.8kDB512 3.9E DB545 2.2kDB513 4.7E DB546 2.7kDB514 5.6E DB547 3.3kDB515 6.8E DB548 3.9kDB516 8.2E DB549 4.7kDB517 10E AC386 5.6kAC379 12E AC387 6.8kDB519 15E AC388 8.2kDB520 18E AC377 10kDB521 22E AC380 12kDB522 27E AC381 15kDB523 33E AC382 18kDB524 39E AC385 22kDB525 47E

HIGH-POWER RESISTORS 50PCSA mixed pack that contains 50 high-powerresistors in the range of 1 to 7 Watt.

ORDER CODE: AB642

SINGLE ROWRESISTOR NETWORKS

Note: These are SIL, thick-filmresistor networks. It is used forhigh density circuit design. It canbe used for multiple pull up orpull down resistors. Each pack-age contains resistors that haveone common connection at pin 1(closest to the dot). Each internalresistor is rated (1/8) WattResistor Tolerance: 5%

Note: These are 5 pin SIL resistornetworks. Each contains 4 identi-cal resistors. Pin pitch: 2.54mm.

GB266 100k

Note: These are 9 pin SIL resistornetworks. Each contains 8 identi-cal resistors. Pin pitch: 2.54mm

AB765 10E AB798 3.9kAB766 12E AB799 4.7kAB767 15E AB800 6.8kAB768 18E AB801 8.2kAB769 22E GB207 10kAB770 27E AB803 12kAB771 33E AB804 15kAB772 39E AB805 18kAB773 47E AB806 22kAB774 56E AB807 27kAB775 68E AB808 33k

AB776 100E AB809 39kAB777 120E AB810 47kAB778 150E AB811 56kAB779 180E AB812 68kAB780 220E AB813 82kAB781 270E AB814 100kAB783 330E AB815 120kAB784 390E AB816 150kAB787 470E AB817 180kAB789 680E AB818 220kAB790 820E AB819 270kAB791 1.0k AB820 330kAB792 1.2k AB821 390kAB793 1.5k AB822 470kAB794 1.8k AB823 560kAB795 2.2k AB824 680kAB796 2.7k AB825 820kAB797 3.3k AB826 1M

PCB MOUNTPRESET / TRIMMERPOTENTIOMETERS

TRIMMING POTENTIOMETERS 50pcs

AB626

A mixed pack that contains 50 preset poten-tiometers.

ORDER CODE: AB626

7MM MINIATURE PCB MOUNTPRESET POTENTIOMETERS

GB339 200E Koa trimpotGB263 10k Koa trimpotGB333 20k trimpotGB231 100k Koa trimpotGB226 500k Koa trimpotGB157 1M Koa trimpot

10MM PRESET POTENTIOMETERHORIZONTAL MOUNT

AC291 47E DB167 47kDB162 100E DB168 100kDB298 220E DB301 220kDB163 470E DB169 470kDB164 1k DB170 1MDB299 2.2k DB302 2.2MDB165 4.7k AC354 4.7MDB166 10k AC292 10MDB300 22k

07.41

10MM PRESET POTENTIOMETERVERTICAL MOUNT

AC293 47E DB158 47kDB153 100E DB159 100kDB293 220E DB296 220kDB154 470E DB160 470kDB155 1k DB161 1MDB294 2.2k DB297 2.2MDB156 4.7k AC355 4.7MDB157 10k AC294 10MDB295 22k

10MM CERMET SINGLE-TURNTRIMMER POTENTIOMETER

HORIZONTAL MOUNT

Note: These are top adjust, sin-gle-turn trimmer potentiometers.The 3 pins are arranged in a tri-angle.Power Rating: 0.5 Watt

AB959 10E AB967 5kAB960 20E AB968 20kAB962 100E AB969 100kAB963 200E AB970 500kAB964 500E AB971 1MAB965 1k AB972 2MAB966 2k


VERTICAL MOUNT

Note: These are side adjust, sin-gle-turn trimmer potentiometers.The 3 pins are arranged in a tri-angle.Power Rating: 0.5 Watt

AB973 10E AB982 5kAB974 20E AB983 10kAB975 50E AB984 50kAB976 100E AB985 100kAB978 200E AB986 200kAB979 500E AB987 500kAB980 1k AB998 2MAB981 2k


VERTICAL MOUNT

Note: These are side adjust, sin-gle-turn trimmer potentiometers.The 3 pins are arranged in a line.Power Rating: 0.5 Watt

AB940 10E AB949 10kAB941 20E AB950 20kAB942 50E AB951 50kAB943 100E AB952 100kAB944 200E AB953 200kAB945 500E AB954 500kAB946 1k AB955 1MAB947 2k AB957 2MAB948 5k


(SPINDLE TYPE)

DB667 100E DB675 47kDB668 220E DB676 100kDB669 470E DB677 220kDB670 1k DB678 470kDB671 2.2k DB679 1MDB672 4.7k AC295 2.5MDB673 10k AC296 4.7MDB674 22k

10MM PRESET POTENTIOMETERVERTICAL MOUNT(SPINDLE TYPE)

AC297 47E DB639 10kDB633 100E DB640 22kDB634 220E DB641 47kDB635 470E DB642 100kDB636 1k DB643 220kDB637 2.5k DB644 470kDB638 4.7k DB645 1M


(SPINDLE TYPE)

DB618 100E DB626 47kDB619 220E DB627 100kDB620 470E DB628 220kDB621 1k DB629 470kDB622 2.2k DB630 1MDB623 4.7k AC298 2.2MDB624 10k AC299 4.7MDB625 22k AC300 10M

14MM PRESET POTENTIOMETERVERTICAL MOUNT(SPINDLE TYPE)

DB654 100E DB663 100kDB655 220E DB664 220kDB656 470E DB665 470kDB657 1k DB666 1MDB658 2.2k GB166 1M Log.DB659 4.7k GB959 2.2MDB660 10k AC301 4.7MDB661 22k AC302 10MDB662 47k

MULTI-TURN TOP ADJUSTTRIMMER (TY-SERIES)

Note: These are top adjust, multi-turn trimmer potentiometers. The3 pins are arranged in a triangle.Number of Screw Rotations:electrical: 22 turnsmechanical: 25 turnsPower Rating: 0.5 Watt

AB926 50E AB933 10kAB927 100E AB934 20kAB928 200E AB935 50kAB929 500E AB936 100kAB930 1k AB937 200kAB931 2k AB938 500kAB932 5k AB939 1M

MULTI-TURN TOP ADJUSTTRIMMER (TW-SERIES)

Note: These are top adjust, multi-turn trimmer potentiometers. The3 pins are arranged in a line.

07.42

Number of Screw Rotations:electrical: 22 turnsmechanical: 25 turnsPower Rating: 0.5 Watt

AB920 10E DB706 10kAB921 20E DB707 20kAB922 50E DB708 50kDB700 100E DB709 100kDB701 200E DB710 200kDB702 500E DB711 500kDB703 1k AB923 1MDB704 2k AB924 2MDB705 5k AB925 5M

MULTI-TURN SIDE ADJUSTTRIMMER (TX-SERIES)

Note: These are side adjust,multi-turn trimmer potentiome-ters. The 3 pins are arranged in aline.Number of Screw Rotations:electrical: 22 turnsmechanical: 25 turnsPower Rating: 0.5 Watt

DB712 100E DB718 10kDB713 200E DB719 20kDB714 500E DB720 50kDB715 1k DB721 100kDB716 2k DB722 200kDB717 5k DB723 500k

MULTI-TURN TOP ADJUSTTRIMMER (CM-SERIES)

Note: These are side adjust,multi-turn trimmer potentiome-ters. The 3 pins are arranged in a

triangle.Number of Screw Rotations:electrical: 15 turnsmechanical: 18 turnsPower Rating: 0.5 Watt

AB904 10E AB912 10kAB905 50E AB913 20kAB906 100E AB914 50kAB907 200E AB915 100kAB908 500E AB916 200kAB909 1k AB917 500kAB910 2k AB918 1MAB911 5k AB919 2M

PRESET POTENTIOMETERACCESSORIES

PLUG-IN SPINDLES FORPRESET POTENTIOMETERS

GROUP

Note: The picture on the leftshows a black, plastic spindlethat is plugged into a presetpotentiometer. The picture on theright shows plug-in spindles thatwill only plug into spindle typepreset potentiometers. Spindlesare sold separately from the pre-set potentiometers.

FOR 10MM SPINDLE TYPE PRESETAC303 Spindle for 10mm preset pot.

length 10.4mm x 3mm diameter

DB632 Spindle for 10mm preset pot.length 10mm x 5mm diameter

AC356 Spindle for 10mm preset pot.length 25.5mm x 4.9mm diameter

FOR 14MM SPINDLE TYPE PRESETAB086 Spindle for 14mm preset pot.

length 9.5mm x 6mm diameter

DB631 Spindle for 14mm preset pot.length 25mm x 6mm diameter

AC304 Spindle for 14mm preset pot.length 38mm x 6mm diameter

PLUG-IN EDGE WHEEL FORPRESET POTENTIOMETERS

GROUP

Note: This picture shows an edgewheel that is plugged into a spin-dle type preset potentiometer.Edge wheels are sold separatelyfrom the preset potentiometers.

AB605 Edge Wheel 11.5mm diameterfor 10mm spindle typepreset potentiometers

AC305 Edge Wheel 16mm diameterfor 14mm spindle typepreset potentiometers

PANEL MOUNTABLEROTARY

POTENTIOMETERS

POTENTIOMETERS 20pcs

AB628

A mixed pack that contains 20 potentiome-ters.

ORDER CODE: AB628

ROTARY POTENTIOMETERS(LINEAR)

Note: Linear, carbon, single turnpotentiometers.Grooved Spindle: 5.9mm diame-terPower Rating: 0.1 Watt

GB224 500E GB296 10kGB299 5k GB241 250k

ROTARY POTENTIOMETERS(LINEAR WITH PLASTIC HOUSING)

Note: Linear, carbon, single turnpotentiometers.

07.43

Spindle Diameter: 6mmPower Rating: 0.4 Watt

AB782 470E HB168 47kHB165 1k HB169 100kHB257 2.2k AA784 220kHB166 4.7k HB170 470kHB167 10k HB171 1MJB062 22k

ROTARY POTENTIOMETERS(LINEAR)

Note: Linear, carbon, single turnpotentiometers.Spindle Diameter: 6mmPower Rating: 0.4 Watt

AC276 100E AC284 47kAC277 220E AC285 100kAC278 470E AC286 220kAC279 1k AC287 470kAC280 2.2k AC288 1MAC281 4.7k AC289 2.2MAC282 10k AC290 4.7MAC283 22k

ROTARY POTENTIOMETERS(LINEAR WITH SWITCH)

Note: Linear, carbon, single turnpotentiometers that have a built-in single-pole switch.Switch Rating: 0.3A max. /250VacSpindle Diameter: 6mmPower Rating: 0.4 Watt

AB875 100E AB882 22kAB876 220E AB883 47kAB877 470E AB884 100kAB878 1k AB885 220kAB879 2k AB886 470kAB880 4.7k AB887 1MAB881 10k

DUAL POTENTIOMETER(LINEAR)

Note: Two Linear, carbon, singleturn potentiometers in one pack-age with 6 pins.Spindle Diameter: 6mmPower Rating: 0.4 Watt

AC002 100E AC014 22kAC003 220E EB409 47kAC004 470E EB412 100kAC005 1k AC015 220kAC006 2.2k AC016 470kAC007 4.7k AC017 1M

EB408 10k AC018 2.2M

DUAL POTENTIOMETER(LINEAR WITH SWITCH)

Note: Two Linear, carbon, singleturn potentiometers in one pack-age.Each potentiometer has a single-pole switch.Switch Rating: 0.3A max./ 250Vacand 1A max. / 24VdcSpindle Diameter: 6mmPower Rating: 0.4 Watt

AC023 220E AC027 22kAC024 470E AC030 470kAC025 2.2k AC031 1MAC026 4.7k

ROTARY POTENTIOMETERS(LOGARITHMIC)

Note: Log., carbon, single turnpotentiometers.Spindle Diameter: 6mmPower Rating: 0.2 Watt

HB172 1k AC019 47kHB258 2.2k HB176 100kHB173 4.7k AC020 220kHB174 10k HB177 470kHB259 22k HB178 1M

ROTARY POTENTIOMETERS(LOGARITHMIC WITH SWITCH)

Note: Log., carbon, single turnpotentiometers that have a built-in single-pole switch.Switch Rating: 0.3A max. /250VacSpindle Diameter: 6mmPower Rating: 0.2 Watt

AB827 1k AB832 100kAB828 4.7k AB833 220kAB829 10k AB834 470kAB830 22k AB835 1MAB831 47k

DUAL POTENTIOMETER(LOGARITHMIC)

Note: Two Log, carbon, single

turn potentiometers in one pack-age with 6 pins.Spindle Diameter: 6mmPower Rating: 0.2 Watt

AB836 1k AB841 47kAB837 2.2k AB842 100kAB838 4.7k AB843 220kAB839 10k AB844 470kAB840 22k AB845 1M

DUAL POTENTIOMETER(LOGARITHMIC WITH SWITCH)

Note: Two Log, carbon, singleturn potentiometers in one pack-age.Each potentiometer has a single-pole switch.Switch Rating: 0.3A max./ 250Vacand 1A max. / 24VdcSpindle Diameter: 6mmPower Rating: 0.2 Watt

AB847 1k AB851 470kAB848 2.2k AB852 1MAB849 4.7k AB853 2.2M

MULTI-TURNROTARY POTENTIOMETERS

(LINEAR LOW COST)

Note: Low-cost, Linear, wire-wound, 10-turn, multi-turn poten-tiometers.Spindle Diameter: 6mmPower Rating: 2 Watt

AB854 100E AB859 5kAB855 200E AB860 10kAB856 500E AB861 20kAB857 1k AB862 50kAB858 2k

MULTI-TURNROTARY POTENTIOMETERS

(PRECISION LINEAR)

Note: Highly Linear: (0.1%), wire-wound, 10-turn, multi-turn poten-tiometers.

07.44

Spindle Diameter: 6mmPower Rating: 2 Watt

AB863 100E AB868 10kAB864 500E AB869 20kAB865 1k AB870 50kAB866 2k AB871 100kAB867 5k

ANALOGUE COUNTINGDIAL MECHANISMS

ANALOGUE COUNTING DIAL(PRECISION 20 TURNS)

This analogue counting dial enables one tomake fine adjustments to the rotational posi-tion of a potentiometer. It has a locking leverthat is used to prevent the adjusting knobfrom accidentally turning.This analogue counting dial must be con-nected to the spindle of a multi-turn rotarypotentiometer. It is recommended that thisdial is used together with one of the 0.1%linear, 10-turn, multi-turn potentiometers.Specifications:Number of Knob Turns: 20Number of Dial Divisions: 100 per turnReadout Accuracy: 1/1000 over 10 turnsHousing Material: Hard Chrome Cast MetalHigh Force Locking LeverDimensions:

Body Diameter: 46mmTotal Height: 24mmSpindle Diameter: 6.35mm max.

Weight: 55gORDER CODE: AB872

ANALOGUE COUNTING DIAL(LOW COST 15 TURNS)

This analogue counting dial enables one tomake fine adjustments to the rotational posi-tion of a potentiometer. It has a locking leverthat is used to prevent the adjusting knobfrom accidentally turning.This analogue counting dial must be con-nected to the spindle of a multi-turn rotarypotentiometer.Specifications:Number of Knob Turns: 15Number of Dial Divisions: 50 per turnReadout Accuracy: 2/1000 over 10 turnsHousing Material: PlasticLocking LeverDimensions:

Body Diameter: 22.8mmTotal Height: 25mmSpindle Diameter: 6.35mm max.


ANALOGUE COUNTING DIAL(15 TURNS)

This analogue counting dial enables one tomake fine adjustments to the rotational posi-tion of a potentiometer. It has a locking leverthat is used to prevent the adjusting knobfrom accidentally turning.This analogue counting dial must be con-nected to the spindle of a multi-turn rotarypotentiometer.Specifications:Number of Knob Turns: 15Number of Dial Divisions: 50 per turnReadout Accuracy: 2/1000 over 10 turnsHousing Material: AluminiumLocking LeverDimensions:

Body Diameter: 22.8mmTotal Height: 25mmSpindle Diameter: 6.35mm max.


POTENTIOMETER KNOBSAND KNOB ACCESSORIES

Note: These are standard poten-tiometer knobs that have a blackmatt finish with a white dot andnarrow skirt. Each knob has atightening screw that enters radi-ally from the side.

GB239 Knob for 6mm diameter groovedspindle. It does not have a tightening screw.15.5mm diameter x 14.5mm height

AB496 Knob for spindle with 3mm diameter15.5mm diameter x 14.8mm height


AC044 Knob for spindle with 6mm diameter24.5mm diameter x 20.1mm height


Note: These are collet poten-tiometer knobs. Each knob has abrass insert (collet) that is tight-ened onto the potentiometer'sspindle. This is done by turning anut in a clock wise directionwhen looking at the top of theknob. The nut and collet are hid-den underneath a removable cap.These knobs come in black orgrey colour with a white line.

BLACK WITH A WHITE LINE


AC033 Knob for spindle with 4mm diameter10.5mm diameter x 16mm height



HB306 Knob for spindle with 6mm diameter14.5mm diameter x 16.5mm height

AC040 Knob for spindle with 4mm diameter20mm diameter x 16mm height


GREY WITH A WHITE LINE








POTENTIOMETER KNOBSWITH NUT

(SEDER TYPE)

Note: These are seder typepotentiometer knobs. Each knobhas a brass insert (collet) thatcan be tightened onto the poten-

07.45

tiometer's spindle. This is doneby turning a nut in a clock wisedirection when looking at the topof the knob. The nut and colletare hidden underneath a remov-able cap. These knobs come inblack or grey colour.

BLACK

AC046 Knob for spindle with 4mm diameter21mm diameter x 18.5mm height


AC050 Knob for spindle with 6.35mm dia.21mm diameter x 18.5mm height





GREY



AC049 Knob for spindle with 6.35mm dia.21mm diameter x 18.5mm height





POTENTIOMETER KNOBSWITH SCREW(SEDER TYPE)

Note: These are seder typepotentiometer knobs. Each knobhas a brass insert (collet) thatcan be tightened onto the poten-tiometer's spindle. This is doneby turning a screw in a clockwise direction when looking atthe top of the knob. The screwand collet are hidden underneatha removable cap. These knobs

come in black or grey colour.BLACK




AC069 Knob for spindle with 6.35mm dia.15mm diameter x 17mm height

GREY





AC068 Knob for spindle with 6.35mm dia.15mm diameter x 17mm height

BLACK WITH A WHITE LINE


GREY WITH A WHITE LINE


CAPS FOR SEDER TYPEPOTENTIOMETER KNOBS

Note: These are stylish caps thatfit on top of the seder type poten-tiometer knobs. The caps areround and come in differentcolours and diameters. These

caps can also have printed sym-bols like a dot, line, arrow or tri-angle.

BLUE CAPS

FOR 10MM DIAMETER KNOBSAC070 Cap that is plain without a symbolAC071 Cap with a white dotAC072 Cap with a white arrowAC073 Cap with a white line

FOR 15MM DIAMETER KNOBSAC097 Cap that is plain without a symbolAC098 Cap with a white dotAC099 Cap with a white triangleAC100 Cap with a white arrowAC102 Cap with a white lineAC101 Cap with a white clockwise arrow

FOR 21MM DIAMETER KNOBSAC131 Cap that is plain without a symbolAC132 Cap with a white dotAC133 Cap with a white arrowAC134 Cap with a white lineAC135 Cap with a black line

FOR 28MM DIAMETER KNOBSAC158 Cap that is plain without a symbolAC159 Cap with a white arrowAC160 Cap with a white line

FOR 36MM DIAMETER KNOBSAC177 Cap that is plain without a symbolAC178 Cap with a white line


GREY CAPS

FOR 10MM DIAMETER KNOBSAC074 Cap that is plain without a symbolAC075 Cap with a white triangleAC077 Cap with a white arrowAC078 Cap with a white lineAC079 Cap with a black lineAC076 Cap with a white counter-clockwise

arrow

FOR 15MM DIAMETER KNOBSAC103 Cap that is plain without a symbolAC104 Cap with a white dotAC105 Cap with a white triangleAC106 Cap with a white arrowAC107 Cap with a white lineAC108 Cap with a black arrow

FOR 21MM DIAMETER KNOBSAC136 Cap that is plain without a symbolAC137 Cap with a white arrowAC138 Cap with a white lineAC139 Cap with a black clockwise arrow

FOR 28MM DIAMETER KNOBSAC161 Cap that is plain without a symbolAC162 Cap with a white arrowAC163 Cap with a white lineAC164 Cap with a black arrow

FOR 36MM DIAMETER KNOBSAC179 Cap that is plain without a symbolAC180 Cap with a black line


YELLOW CAPS

FOR 10MM DIAMETER KNOBSAC080 Cap that is plain without a symbolAC081 Cap with a white triangle

07.46

AC082 Cap with a white arrowAC083 Cap with a white lineAC084 Cap with a black line

FOR 15MM DIAMETER KNOBSAC109 Cap that is plain without a symbolAC110 Cap with a white dotAC111 Cap with a white triangleAC112 Cap with a white arrowAC113 Cap with a white lineAC114 Cap with a black line

FOR 21MM DIAMETER KNOBSAC140 Cap that is plain without a symbolAC141 Cap with a white dotAC142 Cap with a white triangleAC143 Cap with a white arrowAC144 Cap with a white line




BLACK CAPS

FOR 10MM DIAMETER KNOBSAC085 Cap that is plain without a symbolAC086 Cap with a white triangleAC087 Cap with a white arrowAC088 Cap with a white line

FOR 15MM DIAMETER KNOBSAC115 Cap that is plain without a symbolAC116 Cap with a white dotAC117 Cap with a white triangleAC118 Cap with a white arrowAC119 Cap with a white line

FOR 21MM DIAMETER KNOBSAC145 Cap that is plain without a symbolAC146 Cap with a white triangleAC147 Cap with a white arrowAC149 Cap with a white lineAC148 Cap with a white clockwise arrow




RED CAPS


FOR 15MM DIAMETER KNOBSAC120 Cap that is plain without a symbolAC121 Cap with a white dotAC122 Cap with a white triangleAC123 Cap with a white arrowAC124 Cap with a white lineAC125 Cap with a black arrow

FOR 21MM DIAMETER KNOBSAC150 Cap that is plain without a symbolAC151 Cap with a white dotAC152 Cap with a white arrowAC153 Cap with a white lineAC154 Cap with a black line




GREEN CAPS


FOR 15MM DIAMETER KNOBSAC126 Cap that is plain without a symbolAC127 Cap with a white triangleAC128 Cap with a white arrowAC129 Cap with a white lineAC130 Cap with a black arrow





POINTERS FOR SEDER TYPEPOTENTIOMETER KNOBS

Note: These are pointers that arefixed underneath the seder typepotentiometer knobs. It is usedto indicate the knob’s angle ofrotation. The pointers are roundand come in different coloursand diameters.

FOR 10MM DIAMETER KNOBSAC201 Blue AC204 BlackAC202 Grey AC205 RedAC203 Yellow AC206 Green




FOR 36MM DIAMETER KNOBSAC225 BlackAC226 Red

FOR 45MM DIAMETER KNOBSAC227 YellowAC228 Red

INDICATOR SKIRTSFOR SEDER TYPE

POTENTIOMETER KNOBS

Note: These are indicator skirtsthat are fixed underneath theseder type potentiometer knobs.The skirt extends outwards fromunderneath the knob. It is usedto indicate the knob’s angle ofrotation.

FOR 15MM DIAMETER KNOBSAC229 Skirt is grey with a white line

outer diameter of skirting is 22mm

AC230 Skirt is black with a white lineouter diameter of skirting is 22mm

FOR 21MM DIAMETER KNOBSAC231 Skirt is grey with a black triangle


AC232 Skirt is grey with a white lineouter diameter of skirting is 30mm

AC233 Skirt is black with a white lineouter diameter of skirting is 30mm

NUMBERED SKIRTSFOR SEDER TYPE

POTENTIOMETER KNOBS

Note: These are numbered, trans-parent indicator skirts that arefixed underneath the seder typepotentiometer knobs. The skirtextends outwards from under-neath the knob. Each number

07.47

can be used to indicate a specificangle of knob rotation.

FOR 15MM DIAMETER KNOBSAC234 Skirt has black numbers: 0 - 11


AC235 Skirt has black numbers: 1 - 12outer diameter of skirting is 22mm

AC236 Skirt has white numbers: 1 - 12outer diameter of skirting is 22mm

FOR 21MM DIAMETER KNOBSAC237 Skirt has black numbers: 1 - 12





FOR 36MM DIAMETER KNOBSAC241 Skirt has white numbers: 0 - 9


QUARTZ CRYSTALS

Note: General purpose quartzcrystals. Suited for microproces-sor oscillators, frequency synthe-sizers and more.Tolerance at 25°C: 30ppmFrequency Drift (-10 to +60°C):

30ppmLoad Capacitance: 30pFPin spacing: 4.9mmWidth x Thickness: 10x3.5mmHeight:

Low Profile: 3.3mmStandard Size: 13mm

AA053 32.768 kHzFB460 40.0 kHz

LOW PROFILEAD219 3.5795 MHz Low ProfileAD222 3.6864 MHz Low ProfileAC919 4.0 MHz Low ProfileAD223 6.0 MHz Low ProfileAD220 8.0 MHz Low ProfileAC920 10.0 MHz Low ProfileAC921 11.0592 MHz Low ProfileDB405 12.0 MHz Low ProfileAD221 16.0 MHz Low ProfileAC922 20.0 MHz Low Profile

STANDARD SIZEAD005 1.0 MHzGB186 3.5795 MHz

AD062 3.2768 MHzAC554 3.6864 MHzDB220 4.0 MHzGB277 4.096 MHzAA474 4.433619 MHzDB221 6.0 MHzDB222 8.0 MHzAB257 8.8672 MHzGB671 9.8304 MHzGB501 10 MHzAC523 11 MHzAA627 11.0592 MHzDB223 12.0 MHzEB127 12.288 MHzDB224 16.0 MHzAA755 20.0 MHzAA054 24.0 MHzAB348 24.576 MHzAC524 27.0 MHzAC525 30.0 MHzEB905 32.0 MHzAC526 48.0 MHz

CRYSTAL OSCILLATORMODULES

Note: These are 5Vdc CrystalOscillators with a single signaloutput. The output signal has afrequency as indicated on thehermetically sealed metal casing.The connection pins are spacedto fit into a 14-pin DIP IC socket.Pin Numbers:1: No Connection7: GND (negative supply rail 0V)8: Oscillator Signal Output14: Vcc (positive supply rail5Vdc)Supply Voltage: 5Vdc ± 10%Output signal rise/fall time / sup-ply current:

1 - 8MHz: 15ns max. / 10mA9 - 30MHz: 10ns max. / 10 -

50mA32 - 66MHz: 5ns max. / 50mA

Operating Temperature: 0°C to+70°CFrequency Drift: 0°C to +70°C±100ppmFrequency stability: ±0.01% at25°C

AC530 1 MHzAB514 4 MHz

AC534 8 MHzAB515 10 MHzAC531 12 MHzAC532 16 MHzAB516 20 MHzAB517 30 MHzAC533 32 MHzAB518 40 MHz

CERAMIC RESONATORS

AA378 455kHz (CSB455E) 2 pinsGB463 455kHz (ZTB455E) 2 pinsAD169 4MHz 2 pinsGB477 4.19MHz 3 pinsAD170 16MHz 3 pins

SEMI-CONDUCTORS

INTEGRATED CIRCUITS

INTEGRATED CIRCUITS 20PCS

AB627

A mixed pack that contains 20 integrated cir-cuits and a data pamphlet.

ORDER CODE: AB627

4000 CMOS LOGIC IC’SJB067 4000B 2 CMOS 3-input NOR

gate (DIP14)HB124 4001B 4 CMOS 2 input NOR

gate (DIP14)JB068 4001UB 4 CMOS 2-input NOR

gate (DIP14)JB069 4002B 2 CMOS 4-input NOR

gate (DIP14)JB071 4007B 2 CMOS complementary

pair (DIP14)AA254 4008B CMOS 4-bit binary full

adder (DIP16)AA052 4009UB Hex Buffers Inverting

(DIP16)AC505 4010B Hex Non-inverting Buffers

(DIP16)HB125 4011B 4 CMOS 2-input NAND

gate (DIP14)GB228 MC14011 Quad 2-Input NAND

07.48

Gate (DIP14)JB073 4012B 2 CMOS 4-input NAND

gate (DIP14)HB126 4013B 2 CMOS D-type flip-

flops (DIP14)JB074 4014B CMOS 8-bit static shift

(DIP16)JB075 4015B 2 CMOS 4-bit static

shift (DIP16)JB076 4016B 4 CMOS bilateral

switches (DIP14)HB127 4017B CMOS 5-stage

Johnson count (DIP16)GB222 MC14017 Decade Counter/Divide

(DIP16)JB077 4018B CMOS preset divide-by-n

(DIP16)JB078 4019B 4 CMOS 2-input multi

plexer (DIP16)HB128 4020B CMOS 14-stage binary

count (DIP16)HB129 4021B CMOS 8-bit static shift

(DIP16)JB079 4022B CMOS 4-stage divide-by-8

(DIP 16)JB080 4023B 3 CMOS 3-input NAND

gate (DIP14)HB130 4024B CMOS 7-stage binary

count (DIP14)JB081 4025B 3 CMOS 3-input NOR

gate (DIP14)HB131 4026B 7-Seg. display driver decade

counter/divider (DIP16)JB082 4027B 2 CMOS JK flip-flop

(DIP16)JB083 4028B CMOS 1-of-10 decoder

(DIP16)JB084 4029B CMOS synchronous

up/down (DIP16)JB085 4030B 4 CMOS Exclusive-OR

gate (DIP14)AC516 4031B 64-stage static shift register

(DIP16)AC517 4033B 7-Seg. display driver decade

counter/divider (DIP16)JB086 4035B CMOS 4-bit universal

shift (DIP16HB132 4040B CMOS 12stage binary

ount (DIP16)JB087 4041B 4 CMOS true/comple

ment buf (DIP14)JB088 4042B 4 CMOS D-latch

(DIP16)HB133 4043B 4 CMOS R/S latch 3-

state (DIP16)JB089 4044B 4 CMOS R/S latch 3-

stage (DIP16)HB134 4046B CMOS phase-locked

loop (DIP16)HB135 4047B CMOS mono/astable

multivib (DIP14)HB136 4049B CMOS hex inverting

buffers (DIP16)JB090 4050B CMOS hex non-inverting

buf (DIP16)JB091 4051B CMOS 8-channel analogue

(DIP16)JB092 4052B 2 CMOS 4-channel

analogue (DIP16)JB093 4053B 3 CMOS 2-channel

analogue (DIP16)AC518 4055B BCD to 7-seg. decoder LCD

driver (DIP16)AC519 4056B BCD to 7-seg. decoder LCD

driver + input latch (DIP16)HB137 4060B CMOS 14-stage ripple-

carry (DIP16)HB138 4066B 4 CMOS bilateral

switches (DIP14)JB094 4068B CMOS 8-input NAND

gate (DIP14)JB095 4069B CMOS hex inverter

(DIP14)JB096 4070B 4 CMOS EXCLUSIVE-OR

gate (DIP14)JB097 4071B 4 CMOS 2-input OR

gate (DIP14)JB098 4072B 2 CMOS 4-input OR

gate (DIP14)JB099 4073B 3 CMOS 3-input AND

gate (DIP14)

JB100 4075B 3 CMOS 3-input OR gate (DIP14)

JB101 4076B 4 CMOS D-type register (DIP16)

JB102 4077B 4 CMOS EXCLUSIVE-NOR gate (DIP14)

JB103 4078B CMOS 8-input NOR gate (DIP14)

HB139 4081B 4 CMOS 2-input AND gate (DIP14)

JB104 4082B 2 CMOS 4-input AND gate (DIP14)

AC520 4089B binary rate multiplier (DIP16)HB140 4093B 4 CMOS 2-input NAND

Schmit (DIP14)JB106 4094B CMOS 8-stage shift-an-

store(DIP16)AC521 4098B Dual Monostable

Multivibrator (DIP16)AA499 4099B 8-Bit Addressable

Latches (DIP16)HB141 4104B 4 CMOS low to high

voltage (DIP16)EB688 4503B Hex Buffer 3 State

(DIP16)JB108 4510B CMOS BCD up/down

ounter (DIP16)HB142 4511B CMOS BCD - 7-segment

latch/Decoder/Driver(DIP16)JB109 4512B CMOS 8-input multiplexer

(DIP16)EB689 4514B 4-bit latch / 4-to-16 decoder

set output is high (DIP24)AC522 4515B 4-bit latch / 4-to-16 decoder

set output is low (DIP24)JB110 4516B CMOS binary up/down

counter (DIP16)JB111 4518B 2 CMOS BCD counter

(DIP16)JB112 4519B 4 CMOS 2-input multi

plexer (DIP16)JB113 4520B 2 CMOS binary counter

(DIP16)JB114 4521B CMOS 24-stage frequency

(DIP16)JB115 4522B CMOS program 4-bit BCD

(DIP16)JB116 4528B 2 CMOS mono multi

vibrator (DIP16)JB118 4532B CMOS 8-input priority

(DIP16)EB690 4536B Programmable timer

(DIP16)JB119 4538B 2 CMOS precision mono

stable (DIP16)JB120 4539B 2 CMOS 4-input multi

plexer (DIP16)HB143 4541B CMOS programmable

timer (DIP 14)JB121 4543B CMOS BCD to 7-seg. latch

(DIP16)GB213 MC14553 3-Digit BCD Counter

(DIP16)JB122 4555B 2 CMOS 1-of-4 decoder

(DIP16)JB123 4556B 2 CMOS 1-of-4 decoder

(DIP16)EB692 4585B 4 B Magnitude comparator

(DIP16)AC506 40102B 8-stage presettable 2-DEC

BCD down counter (DIP16)AA765 40103B Presettable 8-Bit Binary

Down Counter (DIP16)EB691 40106B 4584B Hex shmitt trigger

(DIP14)AC507 40107B Dual 2-input NAND driver

open-drain outputs (DIP8)AC508 40109B Quad low-to-high Voltage

Level Shifter (DIP16)EB822 40110B decade up down counter

(DIP16)AC509 40161B Binary 4-bit Counter asyn-

chronous clear (DIP16)AC510 40162B Decade 4-bit Counter syn-

chronous clear (DIP16)AC511 40174B 6 D-type flip-flops (DIP16)AC512 40175B 4 D-type flip-flops (DIP16)AC513 40192B Presettable BCD up/down

Counter (DIP16)AC514 40193B Presettable Binary up/down

Counter (DIP16)

AC515 40194B Bidirectional 4-bit universalshift register (DIP16)

7400 LOGIC IC’SEB670 74HC00 Gate Quad 2 Input NAND

(DIP14)HB144 74HCT00 CMOS 4 2-input NAND

gate (DIP14)EB647 74LS00 Quad 2 Input NAND

gate (DIP14)EB671 74HC02 Gate quad 2 input NOR

(DIP14)HB145 74HCT02 CMOS 4 2-input NOR gate

(DIP14)EB648 74LS02 Gate Quad 2 input NOR

(DIP14)EB672 74HC04 6 Inverter/Not gates (DIP14)HB288 74HCT04 CMOS hex (6) inverter / Not

gates (DIP14)EB649 74LS04 6 Inverter / Not gate (DIP14)EB861 74HC05 6 Inverters / Not gates

Open Drain (DIP14)AA571 74LS05 6 Inverter / Not gates

Open Collector (DIP14)EB646 7406 6 Inverting / Not gate buffer

Open Collector (DIP14)AA572 74LS06 6 Inverting/ Not gate buffer

Open Collector (DIP14)AA552 7407 Hex (6) buffers with open

collector output (DIP14)EB673 74HC08 Gate quad 2 input and

(DIP14)HB289 74HCT08 quad 2-input AND gate

(DIP14)EB650 74LS08 Gate Quad 2 Input and

(DIP14)DB735 74LS09 Quad 2 Input AND Gate

with O/C (DIP14)JB148 74HCT10 triple 3-input NAND gate

(DIP14)AA488 74LS10 Triple 3-Input NAND Gates

(DIP14)JB149 74HCT11 triple 3-input AND gate

(DIP14)AA550 74C14 40106B 6 Inverting / Not

gate Schmitt trigger (DIP14)EB678 74HC14 Hex schmitt trigger (DIP14)HB146 74HCT14 CMOS 6 inverting / Not gate

Schmit Trigger (DIP14)EB655 74LS14 6 Schmitt Trigger Not gates

(DIP14)JB150 74HCT20 dual 4-input NAND gate

(DIP14)JB151 74HCT21 dual 4-input AND gate

(DIP14)JB152 74HCT27 triple 3-input NOR gate

(DIP14)JB153 74HCT30 8-input NAND gate

(DIP14)EB682 74HC32 quad 2-input OR Gate

(DIP14)HB290 74HCT32 quad 2-input OR Gate

(DIP14)EB658 74LS32 Gate quad 2 input or

(DIP14)AA573 74LS42 BCD to Decimal Decoder

(DIP16)AA574 74LS47 BCD-7seg. decoder/driver

(DIP16)JB154 74HCT73 dual JK with reset (DIP14)EB686 74HC74 Dual D type Flip-Flop

(DIP14)HB147 74HCT74 CMOS 2 D-type flip flop

(DIP14)JB155 74HCT75 quad bistable (DIP16)AA012 74LS76 dual JK with set and reset

neg.-edge trigger (DIP16)HB291 74HCT85 Magnitude comparator 4bit

(DIP16)EB687 74HC86 Gate Quad 2 Input EXOR

gate (DIP14)HB292 74HCT86 quad 2-input EXCL.-OR

gate (DIP14)DB734 74LS90 Decade counter Divide by

2 and 5 (DIP14)JB157 74HCT107 dual JK with reset (DIP14)JB158 74HCT109 dual JK with set and reset

pos.-edge trigger (DIP16)AC883 74HC112 dual JK with set and reset

neg.-edge trigger (DIP16)AA575 74LS122 Retriggerable Resettable

07.49

Multivibrator (DIP14)EB674 74HC123 Dual mono. multivibrator

(DIP16)EB651 74LS123 Monostable Multivibrator

(DIP16)EB675 74HC125 Gate quad buffer TS

(DIP14)JB160 74HCT125 quad buffer/line driver

(DIP14)JB161 74HCT126 quad buffer/line driver

(DIP14)EB676 74HC132 Quad 2 Inp Schmit trigger

(DIP14)JB162 74HCT132 quad 2-input NAND

(DIP14)AD249 74HC133 13-input NAND gate

(DIP16)EB677 74HC138 3 to 8 Line decoder

(DIP16)HB148 74HCT138 CMOS 3-8 line decoder

(DIP16)EB653 74LS138 3 to 8 Line Decoder

(DIP16)JB164 74HCT139 dual 2-to-4 line decode

(DIP16)EB654 74LS139 Decoder / Demultiplexer

(DIP16)HB294 74HCT151 octal-input multiplexer

(DIP16)JB165 74HCT153 dual 4-input multiplex

(DIP16)FB459 74HC154 CMOS 4 to 16 Line

Decoder (DIP24w)GB334 74HC157 quad 2-input multiplex

(DIP16)JB166 74HCT157 quad 2-input multiplex

(DIP16)JB167 74HCT161 4-bit binary counter

(DIP16)JB168 74HCT163 4-bit binary counter

(DIP16)HB149 74HCT164 CMOS 8-bit serial-in

(DIP14)GB551 74HC164 CMOS 8-bit serial-in

(DIP14)JB169 74HCT165 8-bit shift register (DIP16)JB170 74HCT174 hex D-type flip-flop (DIP16)JB171 74HCT175 quad D-type flip-flop

(DIP16)AA521 74LS190 Up/Down Decade Counter

Ripple Clock (DIP16)JB173 74HC191 4-bit binary counter

(DIP16)AA630 74HC194 Bidirectional 4-Bit Universal

Shift Register (DIP16)AC909 74LS194 Bidirectional 4-Bit Universal

Shift Register (DIP16)JB175 74HCT195 4-bit parallel register

(DIP16)JB176 74HCT221 dual non-retrig. mono

(DIP16)GB741 74HC238 3-to-8 line decoder (DIP16)JB177 74HCT238 3-to-8 line decoder (DIP16)JB178 74HCT240 octal buffer/line drive

(DIP20)JB179 74HCT241 octal buffer/line drive

(DIP20)JB180 74HCT244 octal buffer/line drive

(DIP20)EB656 74LS244 Octal Bus Drivers (DIP20)GB418 74HC245 Octal bus transceiver

(DIP20)JB181 74HCT245 octal bus transreceiver

(DIP20)EB657 74LS245 Octal bus transceiver

(DIP20)JB183 74HCT257 quad 2-input multiplex

(DIP16)GB209 74HC259 8-bit addressable latch

(DIP16)JB185 74HCT259 8-bit addressable latch

(DIP16)EB681 74HC273 Octal D Type Flip-Flop

(DIP20)JB186 74HCT273 octal D-type flip-flop

(DIP20)HB296 74LS283 binary full adder 4-bit

(DIP16)JB187 74HCT299 8-bit univer. register

(DIP20)EB683 74HC373 Octal D type Flip-Flop

(DIP20)JB190 74HCT373 octal D-type latch (DIP20)EB659 74LS373 D-type latch (DIP20)JB191 74HCT374 octal D-type flip-flop


(DIP20)JB193 74HCT390 dual decade rip. counter

(DIP16)AB958 74HC393 dual 4-bit binary counter

(DIP14)JB194 74HCT393 dual 4-bit binary counter

(DIP14)JB195 74HCT540 octal buffer/line driver

(DIP20)HB150 74HC541 CMOS 8 buffer/line driver

(DIP20)JB196 74HCT541 octal buffer/line driver

(DIP20)EB684 74HC573 Octal D-Type Latch TS

(DIP20)JB197 74HCT573 octal D-type latch (DIP20)EB685 74HC574 Octal D type flip-flop TS


(DIP20)GB580 74HC595 8-bit shift register (DIP16)JB200 74HCT688 magnitude comp. 8-bit

(DIP20)HB263 74C922 Keyboard Encoder (DIP18)HB264 74C923 Keyboard Encoder /

Decoder (DIP20)

AUDIO AMPLIFIERSGB664 A205K for Kemo FB579GB313 BA5406 Dual 3-W Audio Power

Amplifier (SIL12)GB171 LM1875T Audio Power Amp 20W

(5pin TO220)HB091 LM380N Audio amp 2.5W (DIP14)HB210 LM386N-1 Audio Power Amp (DIP8)FB427 LM386N-3 Audio Power Amp (DIP8)FB426 LM386N-4 Audio Power Amp (DIP8)EB742 TBA810S LINEAR AUDIO AMP

5-10W (DIP12)HB094 TBA820M KA2201 Audio amp (DIP8)AA287 TDA1514A Audio amp 50WFB465 TDA1521A Stereo audio amplifier IC

2x6W at ±12V (9 pin)AA587 TDA1558Q Amplifier Audio 4x11WHB092 TDA2002 (LM383) Audio amp 11W

(5pin TO220)DB740 TDA2003 Audio amp 10W Supply 8 to

18V (5p TO220)EB407 TDA2004 10+10 W Stereo Amplifier

(11 pin)AA641 TDA2005 car radio bridge amplifier

20W 14V (11 pin)HB093 TDA2006 Audio amp 8W ±12V

(5pin TO220)GB309 TDA2009A 10W + 10W Audio

Amplifier (11 pin)AA580 TDA2030 Hi-Fi amplifier 14W

±6 to ±22V (5p TO220)EB265 TDA2040 hi-fi audio power amplifier

20W (5 pin)EB585 TDA2611A 5 W audio power amplifier

(SIL9)EB896 TDA2822M dual low-volt amplifier

(DIP8)EB843 TDA7052 Mono audio amp. 1W BTL

(DIP8)GB351 TDA7053A 1W Stereo Audio Amp.

DC vol. adj. (DIP16)AA286 TDA7294 Audio amp 100W Supply

±10 to ±40V

DRIVERSAC889 AD694JN 4-20mA Current Transmitter

Input: 0-2V / 0-10V (DIP16)EB663 26LS31 Line driver RS422 TS

(DIP16)EB668 75176AP BI-Direct BUS Transceiver

(DIP8)EB733 L298N Dual full-bridge driver

46Vmax. 2A per channel(15 pin MULTIWATT)

HB098 LM3914N LED driver linear steps(DIP18)

HB099 LM3915N LED driver logarithmic(DIP18)

EB704 MAX233 +5V RS232 driver/receiver(DIP20)

JB215 MC1489P SN75189N RS232CLine Receiver (DIP14)

EB351 TDA1085C Universal Motor SpeedController

AC944 TC4426A Dual high-speed MOSFETdriver 1.5A (SMD SOIC8)

GB198 UCN5804B Unipolar Stepper MotorTranslator / Driver (DIP16)

DB646 ULN2001AN Darlington Array 0.5A(DIP16)



DB650 ULN2068B Driver Switch 1.5A 35V(DIP16)

DB651 ULN2803AN Darlington Array (DIP18)DB652 ULN2804AN Darlington Array (DIP18)

MEMORY ICSGB581 AT24C01A Serial EEPROM 1024-bit

(DIP8)HB160 AT93C46 Serial EEPROM 1024-bit

(DIP8)GB174 93LC46A/P Serial EEPROM 1024-bit

(DIP8)FB468 AT24C02 I²C Serial EEPROM 2K-bit

(DIP8)AC910 CAT24C02J I²C Serial EEPROM 2K-bit

(SMD SOIC8)FB467 24LC32A-/P I²C Serial EEPROM 32K

(DIP8)FB466 24LC64-/P I²C CMOS Serial EEPROM

64K (DIP8)AD263 24LC256-I/P I²C CMOS Serial EEPROM

256K (DIP8)HB164 6264 CMOS Static RAM 8Kx8

Winbond W2465-70LL100ns (DIP28)

AC564 62256 CMOS Static RAM 32Kx870ns (DIP28)

EB697 62C1024 CMOS Static RAM 128Kx870ns (DIP32)

EB695 M27C128 CMOS UV EPROM 16Kx8200ns (DIP28)

AA352 M27C256 CMOS UV EPROM32K x 8 150ns (DIP28)

AA960 M27C512 CMOS UV EPROM64K x 8 150ns (DIP28)

MICROCONTROLLER 51 FAMILYHB157 80C31 Microcontroller 8-bit

(DIP40)EB698 80C32 MCU 256x8 RAM (DIP40)HB155 AT89C1051-24PC Micro 8-bit

1K flash (DIP20)HB156 AT89C2051-24PC Micro 8-bit

2K flash (DIP20)AA519 AT89C4051-24PC Micro 8-bit

4K flash (DIP20)HB151 AT89C51-20PC Micro 8-bit

4K flash (DIP40w)

PIC MICROCONTROLLER FAMILYEB811 PIC12C509A-04/P MCU 4MHz,

1K OTP, 41B RAM, 6 I/O,1x8bit TMR (DIP8)

AB444 PIC12F509-I/P MCU 4MHz,1K FLASH, 41B RAM, 6 I/O,1x8bit TMR (DIP8)

AB445 PIC12F629-I/P MCU 20MHz,1K FLASH, 128B EEPROM,64B RAM, 6 I/O, 1 Comp,1x8bit 1x16bit TMR (DIP8)

AB446 PIC12F675-I/P MCU 20MHz,1K FLASH, 128B EEPROM,64B RAM, 6 I/O, 1 Comp,4 Ch. multiplex to 10bit A/D,1x8bit 1x16bit TMR (DIP8)

AC845 PIC12F683-I/P MCU 20MHz,2K FLASH, 256B EEPROM,128B RAM, 6 I/O, 1 Comp,4 Ch. multiplex to 10bit A/D,Captur/Compare/10bit PWM,2x8bit 1x16bit TMR (DIP8)

07.50

JB130 PIC16C54C-04/P MCU 4MHz,0.5K OTP, 25B RAM, 12 I/O,1x8bit TMR (DIP18)

DB732 PIC16C57C-04/SP MCU 4MHz,2K OTP, 72B RAM, 20 I/O,1x8bit TMR (narrow DIP28)

DB731 PIC16C57C-04/P MCU 4MHz,2K OTP, 72B RAM, 20 I/O,1x8bit TMR (wide DIP28)

AB447 PIC16F57-I/P MCU 20MHz,2k FLASH, 72B RAM, 20 I/O1x8bit TMR (wide DIP28)

FB424 PIC16F627A-I/P MCU 20MHz,1K FLASH, 128B EEPROM,224B RAM, 16 I/O, 2 Comp,1 x 10bit PWM, USART,2x8bit 1x16bit TMR (DIP18)

FB425 PIC16F628A-I/P MCU 20MHz,2K FLASH, 128B EEPROM,224B RAM, 16 I/O, 2 Comp,1 x 10bit PWM, USART,2x8bit 1x16bit TMR (DIP18)

AB376 PIC16F630-I/P MCU 20MHz,1K FLASH, 128B EEPROM,64B RAM, 12 I/O, 1 Comp,1x8bit 1x16bit TMR (DIP14)

AA430 PIC16C711-04/P MCU 4MHz,1K OTP, 68B RAM, 13 I/O,4 Ch. multiplex to 8bit A/D,1x8bit TMR (DIP18)

FB342 PIC16F84A-20/P MCU 20MHz,1K FLASH, 64B EEPROM,68B RAM, 13 I/O,1x8bit TMR (DIP18)

GB496 PIC16F876A-I/SP MCU 20MHz,8K FLASH, 256B EEPROM,368B RAM, 22 I/O, 2 Comp,5 Ch. multiplex to 10bit A/D,2 x 10bit PWM,USART, I2C / SPI2x8bit 1x16bit TMR(narrow DIP28)

AA895 PIC16F877-20/P MCU 20MHz,8K FLASH, 256B EEPROM,368B RAM, 33 I/O, 2 Comp,8 Ch. multiplex to 10bit A/D,2 x Captur/Compare/PWM,USART, I2C / SPI, PSP,2x8bit 1x16bit TMR(wide DIP40)

AC846 PIC18F1320-I/P MCU 40MHz,4K FLASH, 256B RAM,256B EEPROM, 16 I/O,8bitx8bit hardware Multiplier,7 Ch. multiplex to 10bit A/D,Enhanced USART,Enh. Captur/Compare/PWM,1x8bit 3x16bit TMR (DIP18)

AC847 PIC18F2550-I/SP MCU 48MHz,16K FLASH, 2048B RAM,256B EEPROM, 24 I/O,8bitx8bit hardware Multiplier,10Ch. multiplex to 10bit A/D,2 Comparators,USB V2.0 Compliant,Enhanced USART, I2C, SPI,2 x Captur/Compare/PWM,1x8bit 3x16bit TMR(narrow DIP28)

OTHER MICROCONTROLLERSAB256 MC68HC705P6ACP (DIP28)AB180 MC68HC908JB8JP (DIP20)

MICROCONTROLLERSPREPROGRAMMED

GB574 Kemo 513D for FB644

MICROPROCESSOR PERIPHERALSHB161 82C55A Programmable I/O port

(DIP40w)DB730 ADC0804LCN 8-bit A to D converter

parallel output bus (DIP20)EB572 ADC0809CCN 8-bit A to D converter

8 Ch. multiplex to 8-bit A/Dparallel output bus (DIP28w)

AD262 MCP3201-B 12-Bit A to D converterSPI serial interface (DIP8)

EB348 DAC0800LCN 8-bit D to A converterV-supply: 5/-12V (DIP16)

AA048 MAX232 ICL232 dualtransmitter/receiver (DIP16)

EB263 MAX3232CP dual RS-232 TransceiversLow-Power (DIP16)

EB706 MAX691 Micro Bat SW/OVRWatchdog (DIP16)

OPERATIONAL AMPLIFIERSEB720 3403PC Quad Op-amp 3-36V

(DIP14)HB083 LM741CN Op-amp General Purpose

(DIP8)EB726 LM741CH Op-amp General Purpose

round metal package (TO5)EB727 747N-14 Dual Op-amp (DIP14)HB090 CA3130E op-amp MOSFET in

CMOS out (DIP8)HB089 CA3140E op-amp MOSFET in BJT

out (DIP8)AC501 CA3160E op-amp MOSFET in CMOS

out (DIP8)EB823 ICL7611DCPA Op-amp (DIP8)DB738 LF347 wide band quad JFET op-

amp (DIP14)HB086 LF351N op-amp J-FET input (DIP8)HB087 LF353N dual op-amps J-FET input

(DIP8)DB746 LF356 wide band JFET op-amp

(DIP8)EB899 LF411CN op-ampEB900 LF412CN op-ampAC503 LM224N quad low power op-amps

(DIP14)EB710 LM301AN Op-amp General Purpose

(DIP8)EB711 LM308N Precision Op-amp (DIP8)HB085 LM324N quad op-amps (DIP14)DB739 LM348 quad 741 op-amp (DIP14)HB084 LM358N dual op-amps (DIP8)DB653 LM3900 Quad Op-Amp (DIP14)EB298 MC1458N dual op-amp general pur

pose (DIP8)EB901 MC33171P Low Power Single Supply

Op-Amp (DIP8)HB088 NE5532N dual op-amp (DIP8)HB261 NE5534AN low noise op-amp (DIP8)EB740 OP07CP Op-amp Low Offset (DIP8)EB741 RC4558 Low Noise Wide Band

LM741 (DIP8)EB744 TL061CP Single Op-amp Low Power

JFET (DIP8)EB745 TL062CP Dual Op-amp Low Power

JFET (DIP8)AA186 TL071CN J-FET single op-amp

(DIP8)AA070 TL072CN dual JFET op-amp (DIP8)AA187 TL074CN J-FET quad op-amp

(DIP14)AA066 TL081CN JFET op-amp (DIP8)AA067 TL082CN dual JFET op-amp (DIP8)AA068 TL084CN quad JFET op-amp

(DIP14)EB748 TLC27L2CP CMOS Dual Precision Op-

amp (DIP8)EB749 TLC27L4CNCMOS Quad Precision

Op-amp (DIP14)

PROGRAMMABLE LOGIC DEVICES(PLD)

EB701 GAL20V8 Eraseable PAL (DIP24)

RADIO / TV SPECIAL FUNCTIONSEB941 AN1555 Timer (DIP8)EB942 AN1741 Uni, Serie 741, 18V (DIP8)EB955 AN5135 TV, Video+Ton, AGC, AFC

SDIP28EB970 AN6652 Motor Speed Control

(TO126/4)EB971 AN6880 Servo-Motor Control (SIP7)

EB977 AN7117 NF-E, 9V, 2A, 0,65W(SIP9)

EB743 TDA1170 Linear Vertical Deflect(DIP12)

REGULATORS FIXED VOLTAGE

AC923 MCP1700 - 2.5V Vo = +2.5V ± 2%Vi = +2.8V to +6.0VMax. Io = 250mAMax. Power = 369.6mWIo = 0 to 103mA at Vi = 6.0VIo = 0 to 250mA at Vi = 3.9V(SMD 3pin SOT23A)

AC924 MCP1700 - 3.0V Vo = +3.0V ± 2%Vi = +3.29V to +6.0VMax. Io = 250mA(SMD 3pin SOT89)



AA707 LM2936Z-5.0V Reg micro power5V 50mA (TO92)

HB103 78L05 IC Regulator +5V 100mA(TO92)

AA698 LP2950CZ-5.0 Reg micro power5V 100mA (TO92)

EB739 MC78M05CDT Positve Voltage Reg.5V 500mA (SMD DPAK)

HB107 7805 IC Regulator +5V 1A(TO220)

AC495 7805P IC Regulator +5V 1Aisolated tab (TO220)

EB735 LM2940T-5 low dropout 5V 1A (TO220)EB728 7805KC Regulator +5V 1.5A (TO3)AC494 L78S05 Regulator +5V 2A (TO220)EB713 LM323K Regulator +5V 3A (TO3)






HB298 7809 IC Regulator +9V 1A

07.51

(TO220)




EB734 LM2940T-12 low dropout 12V 1A(TO220)


EB729 7812KC Regulator +12V 1.5A(TO3)

AA896 PB137ACV 13.7V Regulator 2A max.used for Lead Acid batterycharger (TO220)




EB730 7815KC Regulator +15V 1.5A(TO3)

AC498 78L18 IC Regulator +18V 100mA(TO92)


AC499 78L24 IC Regulator +24V 100mA(TO92)


HB111 79L05 IC Regulator -5V 100mA(TO92)

HB115 7905 IC Regulator -5V 1A(TO220)




GB578 7909 IC Regulator -9V 1A(TO220)





EB717 7915KC Regulator -15V 1.5A(TO3)

EB415 7918 IC Regulator -18V 1A(TO220)

EB416 7924 IC Regulator -24V 1A(TO220)

REGULATORS VARIABLEVOLTAGE AND CURRENT

HB122 L200C Regulator Adjust V & I(5pin TO220)

EB712 LM317K Adust + Voltage Regulator37V 1.5A (TO3)

HB119 LM317L Regulator 1.2 to 37V100mA (TO92)

HB120 LM317T Regulator 1.2 to 37V 1.5A(TO220)

EB715 LM334Z Adjust Current Source(TO92)

JB216 LM334Z Adjustable Current Source(TO92)

AA047 LM337T adjustable 1.5A negativeregulator (TO220)

JB129 LM338K Regulator 1.2 to 37V 5A(TO3)

EB719 LM338T Adust Positve Voltage

Regulator 5A (TO220)EB721 LM350T Adj. Voltage regulator 1.2

32V 3A (TO220)HB121 LM723CN Voltage Regulator (DIP14)DB550 TL431 Adj. Voltage Reference

(TO92)

REGULATORS SWITCHING, PWMAND CHARGE PUMP

EB722 SG3524N Switching Regulator(DIP16)

AC502 CA3524E Regulating SMPSUPulse Width Modulator(DIP16)

EB723 SG3525AN PWM reg. + soft start(DIP16)

EB724 3526CP Voltage Mode PWMRegulator (DIP18)

EB737 MC34063AP DC->DC Converter 40V1.5A (DIP8)

EB746 TL494CN Switching Regulator(DIP16)

EB750 UC3842N Switching CurrentRegulator 1A (DIP8)

EB751 UC3843N Current Mode Controller(DIP8)

EB752 UC3844N Current Mode PWMControl (DIP8)

EB731 ICL7660CPA Voltage Invertercapacitor charge pump used+(1.5 - 10)V to -(1.5 - 10)VIo: 0 - 20mA, Ro: 55 Ohm(DIP8)

AC943 TC962CPA Voltage Invertercapacitor charge pump used+(3 - 18)V to -(3 - 18)VIo: 0 - 80mA, Ro: 35 Ohm(DIP8)

SPECIAL FUNCTIONSAA303 CA3161E BCD to Seven Segment

Decoder/Driver (DIP16)AA304 CA3162E A/D Converter for 3-digit

Display (DIP16)EB732 CM8870PI KT3170N low power DTMF

receiver (DIP18)DB736 ICL7106CPL A to D Converter with LCD

driver (DIP40w)DB737 ICL7107 A to D Converter with LED

driver (DIP40w)EB702 ICL7136CPL A/D + LO Power LCD

Driver (DIP40)AD155 AY0438 4-Digits 32-Segments Static

CMOS LCD Driver (DIP40w)AA268 ICL7673CPA battery back up (DIP8)GB267 ICM7224IPLCounter 0-19999 with LCD

driver (DIP40w)FB464 LF398N Monolithic Sample-and

Hold Circuit (DIP8)EB709 LM2907N-14 Frequency to Voltage

Conv. (DIP14)AA677 LM2917N Frequency to Voltage

converter (DIP14)EB808 LM2917N-8 Frequency to Voltage con

verter (DIP8)DB729 LM331 Voltage to frequency con

verter (DIP8)AA764 LM567 / NE567 Tone decoder

(DIP8)AA176 M66T-19L Melody transistor (TO92)AB756 SAE800 Melody IC for FB677 (DIP8)AA678 MC145026 coder (DIP16)AA679 MC145027 decoder (DIP16)EB738 MC34064P-5 Under Voltage

Sensor (TO92)GB191 M3481 Music IC for DIY Kit 104GB192 M3485 Music IC for DIY Kit 104GB678 DS1307 Real Time Clock, 64 Byte

user memory (DIP8)FB469 PCF8583P Clock/calender with RAM

(DIP8)GB345 SG06 Set of 2 different Melody

ICs for DIY Kit AA626 TDA1524A Stereo Audio ControllerAA438 UM3750 Programmable

Encoder/Decoder (DIP18)AB561 UM3758 Tri-state Programmable

Encoder/Decoder (DIP18)EB753 XR-2211ACP FSK Modulator/DE-MOD

Tone Decoder (DIP14)EB754 XR4151CP Voltage to Frequency

Convert (DIP8)GB341 Audio IC COB for DIY Kit SG02MGB275 Audio IC COB for DIY Kit 52mGB343 Audio IC COB for DIY Kit SG04M

TIMERS, OSCILLATORS & WAVE-FORM GENERATORS

HB271 7556/TS556 dual 555 CMOS timer(DIP14)

HB101 GLC555 CMOS Timer (low power555) (DIP8)

FB243 LM556N Dual Timer (DIP14)HB100 NE555 HA17555 IC Timer (DIP8)JB065 NE556 dual 555 timer (DIP14)EB907 TS555CN low power single CMOS

timer (DIP8)JB139 XR2206 Waveform generator

(DIP16)AC504 XR2207 Voltage Controlled Oscillator

Waveform generator (DIP14)JB138 XR8038 Waveform generator

(DIP14)

VOLTAGE COMPARATORSJB058 LM311 Voltage Comparator (DIP8)JB060 LM339 Quad Voltage Compatator

(DIP14)JB059 LM393 Dual Voltage Compatator

(DIP8)

TRANSISTORS

TRANSISTORS 20pcs

AB641

A mixed pack that contains 20 transistorsand a data pamphlet.

ORDER CODE: AB641

NPN SILICON BPJ TRANSISTORSFB147 2N1711 NPN 50V 600mA 70MHz

Hfe100 (T05)AA861 2N1893 NPN 80V 0.5A 50MHz

Hfe40 (TO5)FB148 2N2218A NPN 40V 800mA 250MHz

Hfe40 (TO5)DB251 2N2219A NPN 60V 0.8A 300MHz

Hfe100 (TO5)DB213 2N2222A NPN 40V 0.6A 300MHz

Hfe50/300 (TO18)AB394 P2N2222A NPN 40V 0.6A 300MHz

Hfe150 (TO92)DB743 PN2222A NPN 40V 0.6A 300MHz

Hfe50/300 (TO92)AC946 SMBT2222A NPN 40V 0.6A 300MHz

Hfe35/300 SMD (SOT23)AA862 2N2369 NPN 15V 0.5A 500MHz

Hfe40 (TO18)AA863 2N2714 NPN 18V 0.1A Hfe80

(TO98)FB149 2N3019 NPN 80V 1A 100Mhz

Hfe100 (TO5)HB022 2N3053 NPN 60V 0.7A 100Mhz

Hfe50 (TO5)

07.52

FB150 2N3054 NPN 60V 4A 750KHzHfe25 (TO66)

HB023 2N3055 NPN 60V 15A 0.2MhzHfe20/70 (TO3)

FB151 2N3439 NPN 350V 1A 15MHzHfe40 (TO5)

AA864 2N3440 NPN 250V 1A 15MHzHfe40 (TO5)

AA865 2N3705 NPN 30V 0.8A 100MHzHfe150(TO92)

EB818 2N3772 NPN 60V 30A 200KHzHfe15/60 (TO3)

AA310 2N3773 NPN 140V 30A 200KHz15/60 (TO3)

AA006 2N3904 NPN 60V 200mA250MhzHfe100 (TO92)

DB401 2N4401 ZTX300 NPN 40V 0.6A250Mhz Hfe100 (TO92)

AA893 2N4427 NPN 20V 0.4A 500MHzHfe10 (TO39)

FB154 2N4923 NPN 80V 3A 3MHz Hfe20(TO126)


DB470 2N6488 NPN 90V 15A 5MhzHfe20 (TO220)

HB019 2N697 NPN 40V 0.5A 50MhzHfe40/120 (TO5)


AA860 2N929 NPN 45V 30mA 30MHzHfe40 (TO18)

AA767 2SC1815 NPN 50V 150mA 80MHzHfe70/700 (TO92)

DB454 2SC3150 NPN 800V 3A 15MhzHfe10 (TO220)

AA742 2SC3281 NPN 200V 15A 30MhzHfe55/160 (TOP3)

EB903 2SD1555 NPN 5A 3MHz Hfe8(TOP3)

AA879 2SD313 NPN 60V 3A 4MHz Hfe90(TO220)

EB904 2SD350 NPN 700V 11A Hfe3/8(TO3)

EB930 2SD669 NPN 120V 1.5A Hfe60/320(TO126)

AA480 2SD756 NPN 120V 50mA 175MHzHfe250 (TO92)

AA792 AC187-01 NPN 15V 2A 1MHz Hfe100(X04)

DB207 BC107B NPN 50V 0.1A 150MhzHfe200 (TO18)


FB157 BC108C NPN 20V 100mA 150MHzHfe420 (TO18)

FB158 BC109B NPN 20V 100mA 150MHzHfe200 (TO18)

DB209 BC109C NPN 30V 0.1A 150MhzHfe420 (TO18)

HB021 BC140 NPN 40V 1A 50Mhz Hfe40(TO39)

AA055 BC141 NPN 60V 1A 50MhzHfe100 (TO39)

FB159 BC141-10 NPN 60V 1A 50MHz Hfe63(TO39)

AC542 BC141-16 NPN 60V 1A 50MHz Hfe100(TO39)

AA790 BC147 NPN 45V 0.2A 150MHzHfe110 (3pin X09)

AA531 BC167 NPN 45V 100mA 85MHzHfe120 (TO92)

EB897 BC169C NPN 20V 100mA 85MHzHfe380 (TO92)

AA184 BC182B NPN 50V 200mA 150MHzHfe120 (TO92)

FB160 BC182L NPN 50V 200mA 150MHzHfe120 (TO92)

AA795 BC183 NPN 30V 0.2A 150MHzHfe120 (TO92)

FB161 BC184B NPN 30V 200mA 150MHzHfe240 (TO92)

AA798 BC207B NPN 45V 0.1A 150MHzHfe240 (TO106)


FB163 BC237C NPN 45V 100mA 150MHzHfe420 (TO92)

AA800 BC238B NPN 20V 0.1A 150MHzHfe200 (TO92)

FB164 BC238C NPN 20V 100mA 150MHz

Hfe420 (TO92)AA801 BC239B NPN 20V 0.1A 150MHz

Hfe200 (TO92)FB167 BC337-40 NPN 45V 800mA 60MHz

Hfe250 (TO92)AA808 BC338-25 NPN 20V 0.8A 60MHz

Hfe160 (TO92)AA810 BC546B NPN 65V 0.1A 150MHz

Hfe200 (TO92)DB210 BC547B NPN 50V 0.1A 200Mhz

Hfe200 (TO92)AC543 BC547C NPN 50V 0.1A 200Mhz

Hfe420 (TO92)DB211 BC548B NPN 30V 0.1A 200Mhz

Hfe200 (TO92)AB618 BC548C NPN 30V 0.1A 200Mhz

Hfe420 (TO92)DB212 BC549B NPN 30V 0.1A 200MHz

Hfe200 (TO92)AA899 BC549C NPN 30V 0.1A 200MHz

Hfe420 (TO92)AA683 BC550C NPN 45V 0.1A 200Mhz

Hfe420 (TO92)EB004 BC637 NPN 60V 1A 50MHz Hfe40

(TO92)AA704 BC639 NPN 80V 1A 50MHz Hfe40

(TO92)AA814 BC817-40 NPN 45V 0.5A 100MHz

Hfe250/600 SMD (SOT23)AA815 BC847B NPN 45V 0.1A 100MHz

Hfe150 SMD (SOT23)HB024 BD131 NPN 45V 3A 60Mhz

Hfe30 (TO126)HB025 BD135 NPN 45V 1A 50Mhz

Hfe40/250 (TO126)FB170 BD137 NPN 60V 1A 50MHz Hfe40

(TO126)HB026 BD139 NPN 80V 1A 50Mhz

Hfe40/160 (TO126)DB406 BD237 NPN 100V 2A 3Mhz Hfe25

(TO126)AA253 BD239C NPN 100V 2A 3Mhz Hfe15

(TO220)FB181 BD241C NPN 100V 3A 3MHz Hfe25

(TO220)DB448 BD243C NPN 100V 6A 3Mhz Hfe30

(TO220)DB456 BD249C NPN 115V 40A 3Mhz

Hfe25 (TOP3)FB185 BD437 NPN 45V 4A 3MHz Hfe40

(TO126)AA823 BD439 NPN 60V 4A 3MHz Hfe25

(TO126)DB553 BD711 NPN 100V 12A 3MHz

Hfe15/150 (TO220)DB554 BD911 NPN 100V 15A 3MHz

Hfe15/150 (TO220)EB813 BF199 NPN 20V 25mA 275MHz

Hfe38 (TO92)AA827 BF224 NPN 30V 50mA 300MHz

Hfe30 (TO92)AA828 BF255 NPN 40V 50mA 400MHz

Hfe30 (TO92)AA829 BF259 NPN 300V 0.1A 90MHz

Hfe25 (TO39)AA832 BFG65 NPN 10V 50mA 7500MHz

Hfe60 planar (SOT103)AA833 BFR91A NPN 12V 35mA 6GHz

Hfe40 planar (X37)AA834 BFR93A NPN 12V 35mA 4.5GHz

Hfe50 SMD (SOT23)AA650 BFW92A NPN 15V 25mA 1000MHz

Hfe20/150 planar (X37)FB187 BFY50 NPN 35V 1A 60MHz Hfe30

(TO39)HB020 BFY51 NPN 60V 1A 50Mhz Hfe40

(TO5)EB906 BU208A NPN 700V 5A 4MHz

Hfe2.5 (TO3)HB316 BU208D NPN 700V 7A 3Mhz Hfe2

(TO3)FB189 BU2508AF NPN 700V 8A Hfe4

isolated tab (SOT199)FB190 BU326A NPN 400V 6A 4MHz Hfe30

(TO3)FB192 BU426A NPN 400V 8A 3MHz Hfe60

(TOP3)AA432 BU508A NPN 700V 8A Hfe10

(TOP3)AC551 BU508AF NPN 700V 8A 7MHz Hfe6

isolated tab (SOT199)

FB193 BU508DF NPN 700V 8A 3Mhz Hfe6isolated tab (SOT199)

AA840 BU806 NPN 200V 8A Hfe100(TO220)

AA353 BUT11A NPN 450V 5A Hfe5(TO220)

AD224 BUT11AF NPN 450V 5A Hfe10isolated tab (TO220)

AA354 BUW11A NPN 450V 5A Hfe5(TOP3)

FB196 BUY69A NPN 1000V 10A 2MHzHfe15 (TO3)

GB322 H1061 NPN 3A Hfe50 (TO220)EB898 KTC9018C NPN 30V 20mA (TO92)AA741 MJ15003 NPN 140V 20A 2MHz

Hfe25 (TO3)FB211 MJ802 NPN 90V 30A 2MHz Hfe25

(TO3)FB212 MJE13005 NPN 400V 8A 4MHz Hfe10

(TO220)FB213 MJE13007 NPN 400V 4A 4MHz Hfe8

(TO220)FB215 MJE3055T NPN 60V 10A 2MHz Hfe20

(TO220)AA844 MJE340 NPN 300V 0.5A 10MHz

Hfe30 (TO126)AA846 MPSA06 NPN 80V 0.5A 100MHz

Hfe50 (TO92)EB352 MPSA42 NPN 300V 0.5A 50MHz

Hfe40 (TO92)FB217 MPSA44 NPN 350V 300mA 20MHz

Hfe40 (TO92)AA674 MPSH10 NPN 25V 0.5A Hfe60

TO92EB902 S2000 NPN 1500V 5A 7MHz

Hfe2.2 (TOP3)AA849 TIP29C NPN 100V 1A 3MHz Hfe40

(TO220)DB741 TIP3055 NPN 70V 15A 3Mhz

Hfe20/70 (TOP3)HB027 TIP31 NPN 40V 3A 3Mhz

Hfe20/100 (TO220)FB224 TIP31C NPN 100V 3A 3MHz

Hfe20 (TO220)AA851 TIP33C NPN 100V 10A 3MHz

Hfe20 (TOP3)AA853 TIP35C NPN 100V 25A 3MHz

Hfe10 (TOP3)HB028 TIP41 NPN 40V 6A 3Mhz

Hfe15/75 (TO220)FB226 TIP41C NPN 100V 6A 3MHz Hfe15

(TO220)FB228 TIP49 NPN 350V 1A 10MHz

Hfe30 (TO220)AA855 TIP50 NPN 400V 1A Hfe30

(TO220)GB202 ZTX1053A NPN 40V 3A 150Mhz

Hfe30 (TO92)GB257 ZTX320 NPN 15V 0.5A 600Mhz

Hfe20 (TO92)

PNP SILICON BPJ TRANSISTORSDB453 2N2905A PNP 60V 0.6A 200Mhz

Hfe100 (TO5)AA476 2N2907A PNP 60V 0.6A 200MHz

Hfe50/300 (TO18)AB395 P2N2907A PNP 60V 0.6A 200MHz

Hfe150 (TO92)FB218 PN2907A PNP 60V 0.6A 200MHz

Hfe100/300 (TO92)AC948 SMBT2907A PNP 60V 0.6A 200MHz

Hfe50/300 SMD (SOT23)AA007 2N3906 PNP 40V 200mA 250Mhz

Hfe100 (TO92)AA868 2N4403 PNP 40V 0.6A 200MHz

Hfe100 (TO92)AA869 2N5401 PNP 150V 0.6A 100MHz

Hfe60 (TO92)AA894 2SA1013 PNP 160V 1A 15MHz

Hfe60 (TO92)DB552 2SA872A PNP 120V 50mA 60MHz

Hfe250 (TO92)AA874 2SA970 PNP 120V 0.1A 50MHz

Hfe200 (TO92)AA479 2SB716 PNP 120V 50mA 60MHz

Hfe250 (TO92)AA791 BC157 PNP 45V 0.1A 130MHz

Hfe70 (X09)HB031 BC160 PNP 40V 1A 50Mhz Hfe60

(TO39)DB408 BC161-10 PNP 60V 1A 50Mhz Hfe60

07.53

(TO39)DB214 BC177B PNP 45V 0.1A 130Mhz

Hfe180 (TO18)DB215 BC178C PNP 25V 0.1A 100Mhz


Hfe380 (TO18)AA797 BC204B PNP 45V 0.1A 100MHz

Hfe240 (TO106)AA185 BC212B PNP 50V 200mA 200MHz

Hfe200 (TO92)FB162 BC212L PNP 50V 200mA 200MHz

Hfe50 (TO92)AA799 BC214 PNP 30V 0.2A 200MHz




Hfe200 (TO92)AA766 BC261A PNP 45V 100mA 100MHz

Hfe125 (TO18)AA805 BC307B/1 PNP 45V 0.1A 130MHz


Hfe240 (TO92)HB030 BC327 PNP 45V 0.8A 60Mhz

Hfe100 (TO92)FB165 BC327-25 PNP 45V 800mA 60MHz

Hfe160 (TO92)FB166 BC327-40 PNP 45V 800mA 60MHz

Hfe250 (TO92)AA807 BC328-25 PNP 25V 0.8A 60MHz

Hfe160 (TO92)AA809 BC369 PNP 20V 1A 65MHz Hfe85

(TO92)FB168 BC556B PNP 65V 100mA 150MHz

Hfe240 (TO92)DB217 BC557B PNP 50V 0.1A 100Mhz

Hfe200 (TO92)AC544 BC557C PNP 50V 0.1A 100Mhz

Hfe420 (TO92)DB218 BC558B PNP 25V 0.1A 100Mhz

Hfe420 (TO92)AC545 BC558C PNP 25V 0.1A 100Mhz

Hfe420 (TO92)FB169 BC559B PNP 25V 100mA 75MHz


Hfe420 (TO92)AA684 BC560C PNP 45V 0.1A 150Mhz

Hfe420 (TO92)AA705 BC640 PNP 80V 1A 50MHz Hfe40

(TO92)AC947 BC807-40 PNP 45V 0.5A 80MHz

Hfe250/600 SMD (SOT23)AA821 BCX42 PNP 125V 0.8A 100MHz

Hfe25 SMD (SOT23)HB033 BD132 PNP 45V 3A 60Mhz Hfe40

(TO126)HB034 BD136 PNP 45V 1A 50Mhz

Hfe40/250 (TO126)FB059 BD138 PNP 60V 1.5A 50MHz

Hfe40 (TO126)HB035 BD140 PNP 80V 1A 50Mhz

Hfe40/250 (TO126)DB407 BD238 PNP 100V 2A 3MHz Hfe25

(TO126)AA252 BD240C PNP 100V 2A 3Mhz Hfe15

(TO220)FB182 BD242C PNP 45V 3A 3MHz Hfe25

(TO220)FB184 BD244C PNP 100V 6A 3MHz Hfe30

(TO220)DB457 BD250C PNP 115V 25A 3Mhz

Hfe25 (TOP3)AA826 BD438 PNP 45V 4A 3MHz Hfe40

(TO126)DB555 BD712 PNP 100V 12A 3MHz

Hfe15/150 (TO220)DB556 BD912 PNP 100V 15A 3MHz

Hfe15/150 (TO220)EB842 BF324 PNP 30V 25mA 350MHz

Hfe25/60 (TO92)AA830 BF970 PNP 35V 30mA 900MHz

Hfe25/90 planar (X37)AA835 BFR99 PNP 25V 50mA 1.4GHz

Hfe25 (TO72)HB032 MJ2955 PNP 100V 15A 4Mhz

Hfe20/70 (TO3)

FB210 MJ4502 PNP 90V 30A 2MHzHfe25 (TO3)

FB214 MJE2955T PNP 60V 10A 2MHz Hfe20(TO220)

AA845 MJE350 PNP 300V 0.5A 4MHzHfe30 (TO126)

AA847 MPSA56 PNP 80V 0.5A 50MHzHfe50 (TO92)

AA848 MPSA92 PNP 300V 0.5A 50MHzHfe25 (TO92)

DB742 TIP2955 PNP 60V 15A 3Mhz Hfe20(TOP3)

AA850 TIP30C PNP 100V 1A 3MHzHfe40 (TO220)

FB225 TIP32C PNP 100V 3A 3MHz Hfe20(TO220)

AA852 TIP34C PNP 100V 10A 3MHzHfe20 (TOP3)

AA854 TIP36C PNP 100V 25A 3MHzHfe10 (TOP3)

FB227 TIP42C PNP 100V 6A 3MHzHfe15 (TO220)

DARLINGTON SILICON TRANSISTORS

DB463 BC516 PNP 40V 400mA 150MhzHfe30000 (TO92)

DB464 BC517 NPN 40V 400mA 120MhzHfe30000 (TO92)

AC546 BC618 NPN 55V 500mA 155MhzHfe2000 (TO92)

AA819 BCV47 NPN 60V 500mA 170MHzHfe2000 SMD (SOT23)

AA825 BD334 PNP 80V 6A 4MHz Hfe750(TO126)

AC952 BD645 NPN 60V 8A 1MHz Hfe750(TO220)


AC548 BD650 PNP 100V 8A 1MHz Hfe750(TO220)


AC550 BD676 PNP 45V 4A 1MHz Hfe750(TO126)

FB186 BD677 NPN 60V 4A 1MHz Hfe750(TO126)

AA891 BD678A PNP 60V 4A 1MHz Hfe750(TO126)

DB458 BD681 NPN 100V 4A 1MhzHfe750 (TO126)

DB459 BD682 PNP 100V 4A 1MhzHfe750 (TO126)

AA309 BDW93C NPN 100V 15A 20MHzHfe750 (TO220)

AA308 BDW94C PNP 100V 15A 20MHzHfe750 (TO220)

DB460 BDX53C NPN 100V 8A 50MhzHfe750 (TO220)

DB461 BDX54C PNP 100V 8A 50MhzHfe750 (TO220)

AC552 MJ3001 NPN 80V 10A Hfe1000150W (TO3)

EB821 MJ11016 NPN 120V 30A Hfe1000200W (TO3)

FB216 MPSA13 KSP13NPN 30V 300mA 125MHzHfe5000 (TO92)

FB220 TIP107 PNP 100V 8A 4MHzHfe1000 (TO220)

EB926 TIP112 NPN 100V 2A Hfe750(TO220)

EB927 TIP117 PNP 100V 2A Hfe750(TO220)

AA990 TIP121 NPN 80V 5A Hfe1000(TO220)

HB029 TIP122 NPN 100V 5A 4MhzHfe1000 (TO220)

FB221 TIP126 PNP 80V 5A 4MHzHfe1000 (TO220)

HB038 TIP127 PNP 100V 5A 4MhzHfe1000 (TO220)

AA856 TIP132 NPN 100V 12A Hfe1000(TO220)

FB222 TIP137 PNP 100V 12A Hfe1000(TO220)

FB223 TIP142 NPN 100V 10A 4MhzHfe500 (TOP3)

AA857 TIP147 PNP 100V 10A Hfe500(TOP3)

JUNCTION FET / RF MOSFET

HB039 2N3819 N-Ch. 25V 20mA Vgs25Yfs4000 (TO92)

FB152 2N3820 P-Ch. 20V 10mA 360mW(TO92)

AC535 BF245A N-Ch. JFET Transistor30V Idss=6.5mA (TO92)

AA411 BF245B N-Ch. JFET Transistor30V Idss=15mA (TO92)

AC536 BF245C N-Ch. JFET Transistor30V Idss=25mA (TO92)

AA255 BF256B N-Ch. JFET Vgss= -20VIdss=6 to 13mA (TO92)

HB301 BF982 N-Ch. dual-gate MOSFET20V 40mA planar (SOT103)

AA831 BF989 N-Ch. dual-gate MOSFET20V 20mA SMD (SOT143)

POWER MOSFETsAA872 2N7000 N-ch. 60V 0.2A 5E

Vgs±20V (TO92)AA873 2N7002 N-ch. 60V 180mA 5.3E

Vgs±20V SMD (SOT23)AA477 2SJ162 (2SJ49) P-ch. 160V 7A

Vgs±15V (TO3P)AA478 2SK1058 (2SK134) N-ch. 160V 7A

Vgs±15V (TO3P)AA837 BS107 N-ch. 200V 0.15A 28E

Vgs±20V (TO92)HB043 BS170 N-ch. 60V 0.5A 5E

Vgs±20V (TO92)AD148 STP36NF06 N-ch. 60V 30A 0.04E

Vgs±20V (TO220)AC553 BUZ73A N-ch. 200V 5.5A 0.6E

Vgs±20V (TO220)AC537 BUZ80A N-ch. 800V 3A 3E

Vgs±20V (TO220)FB197 IRF510 N-ch. 100V 4A 0.6E


Vgs±20V (TO220)DB462 IRF530 N-ch. 100V 14A 0.18E


Vgs±20V (TO220)AA842 IRF630 N-ch. 200V 9A 0.4E


Vgs±20V (TO220)FB199 IRF710 N-ch. 400V 1.5A 3.6E

Vgs±20V (TO220)FB200 IRF730 N-ch. 400V 5.5A 1E


(TO220)FB203 IRF830 N-ch. 500V 4.5A 1.5E


Vgs±20V (TO220)AC777 IRF3205 N-ch. 55V 75A 0.008E

Vgs±20V (TO220AB)FB204 IRF9530 P-ch. 100V 10A 0.3E

Vgs±20V (TO220)AC538 IRF9520N P-ch. 100V 6.8A 0.48E

Vgs±20V (TO220)DB467 IRF9540N P-ch. 100V 23A 0.2E

Vgs±20V (TO220)AA355 IRF9630 P-ch. 200V 6.5A 0.8E

Vgs±20V (TO220)EB413 IRF9640 P-ch. 200V 11A 0.5E

Vgs±20V (TO220)AD004 IRFBE30 N-ch. 800V 4.1A 3E

Vgs±20V (TO220)FB205 IRFP150 N-ch. 100V 40A 0.055E

Vgs±20V (TO247)AA843 IRFP250 N-ch. 200V 30A 0.08E

Vgs±20V (TO247)FB206 IRFP450 N-ch. 500V 13A 0.4E

Vgs±20V (TO3P)FB207 IRFP460 N-ch. 500V 20A 0.27E

Vgs±20V (TO247)AC539 IRFP530 N-ch. 400V 15A 0.3E

Vgs±20V (TO247)AC540 IRFP9140N P-ch. 100V 19A 0.12E

Vgs±20V (TO247)GB716 IRLZ44N N-ch. 55V 40A 0.022E

07.54

5V logic level Vgs drive(TO220)

DB465 IRFZ44 N-ch. 60V 50A 0.028EVgs±20V (TO220)

AA588 PHP37N06T N-ch. 55V 37A 0.035E(TO220)

AC541 RFP50N06 N-ch. 60V 50A 0.022E(TO220)

FB230 VN2222LL N-ch. 60V 0.75A 7.5E(TO92)

UNIJUNCTION TRANSISTORSHB044 2N2646 30V 50mA (TO18)AA871 2N6027 Programmable UJ-Transistor,

40V 150mA (TO92)

DIODES

DIODE PACK 100pcs

AB625

A mixed pack that contains 100 diodes and adata pamphlet.

ORDER CODE: AB625

RECTIFIER DIODES

Note: General purpose rectifierdiodes.

HB053 1N4007 Rectifier Diode 1000V 1AHB054 1N5408 Rectifier Diode 1000V 3AAC558 BY228 Rectifier Diode 1500V 3AHB307 PX6A06 Rectifier Diode 600V 6A

Blister pack that contains 30 1N4007 rectifierdiodes 1000V 1A: 30 x (HB053).

ORDER CODE: AB755

DIODE BRIDGE RECTIFIERS

Note: General purpose diodebridge rectifiers.

HB055 W04 Diode Bridge Rectifier400V 1.5A

AC555 W10G Diode Bridge Rectifier1000V 1.5A

EB932 KBP206 Diode Bridge Rectifier600V 2A in line

AC556 RS406/L Diode Bridge Rectifier800V 4A in line

AB344 RS606 Diode Bridge Rectifier560V 6A in line

JB128 Diode Bridge Rectifier 6A 400VJB057 Diode Bridge Rectifier 6A 800V

Note: Lead InformationEB230 Diode Bridge Rectifier 15A 400VMB085 Diode Bridge Rectifier 25A 400VMB149 Diode Bridge Rectifier 35A 400VMB150 Diode Bridge Rectifier 50A 400V

RECTIFIER DIODES FASTRECOVERY

Note: Suitable for high frequencycircuits.

EB427 BYW95C Fast soft-recovery rectifier1.25A 600V 250nsaxial (SOD-64)

EB418 FR107 RP1510 Fast recovery1A 1kV 500nsaxial (DO-41)

EB420 FR307 RP3103A Fast recovery3A 1kV 500nsaxial (DO-201AD)

AC559 SF52 Ultra Fast Rectifier5A 100V 35nsaxial (DO-201AD)

EB421 FR607 RP6106A Fast recovery6A 1Kv 500nsaxial (R-6)

MB151 BYV29F-500 Ultra Fast rectifier9A 500V 50ns isolated tab2 pin TO220 (SOD100)

AB519 MUR1510 Ultra Fast Rectifier15A 100V 35ns2 pin TO220 (TO-220AC)

GB502 BYW81PI-200 high efficiencyfast recovery rectifier15A 200V 40ns isolated tab2 pin TO220 (TO-220AC)

AC778 BYV32E200 high efficiency fast recoveryDual 10A 200V 25nscentre common cathode3 pin TO220 (TO-220AB)

AA565 BYW51-200 high efficiency fast recoveryDual 10A 200V 25nscentre common cathode3 pin TO220 (TO-220AB)

SILICON SIGNAL DIODES

HB052 1N4148 Small Signal Diode 75V150mA max Vf = 1V / 10mA

AC557 1N4448 Small Signal Diode 75V150mA max Vf = 1V / 0.1A

AA412 1N914 Small Signal Diode 75V75mA max Vf = 1V / 10mA

Blister pack that contains 100 1N4148 smallsignal diodes 75V 150mA: 100 x (HB052).

ORDER CODE: AB761

SCHOTTKY RECTIFIERS

FB476 BAT85 Signal Diode 200mA / 30VAA629 BAT48 Signal Diode 350mA / 40VDB578 1N5819 Schottky Rectifier 1A / 40VDB579 1N5822 Schottky Rectifier 3A / 40VAA956 1N5825 SB540 Schottky Rectifier

5A / 40V Vf=0.67V max.

AC775 MBR1645 Schottky Power Rectifier15A / 45V Vf=0.63V max.2 pin TO220 (TO-220AC)

GERMANIUM SIGNAL DIODES

DB451 1N60 Signal Diode 45V 50mAHB051 OA91 Signal Diode 115V 50mA

VOLTAGE REFERENCESAA577 LM385Z-1.2 Vr = 1.235V ± 2.2%

Vr / Ir = 20mV / 20mAIr = 20µA - 20mA (TO92)

EB716 LM336Z-2.5 Vr = 2.49V ± 4%Vr / Ir = 10mV / 10mAIr = 400µA - 10mA (TO92)

DB551 LM385Z-2.5 Vr = 2.5V ± 3%Vr / Ir = 20mV / 20mAIr = 30µA - 20mA (TO92)

AC911 MCP1525-ITO Vo = 2.5V ± 1%Vi = 2.7V - 5.5VVo / Io = 2mV / 2mAIo = 0mA to ±2mA (TO92)

AC912 MCP1541-ITO Vo = 4.096V ± 1%Vi = 4.3V - 5.5VVo / Io = 2mV / 2mAIo = 0mA to ±2mA (TO92)

EB718 LM336Z-5.0 Vr = 5V ± 4%Vr / Ir = 20mV / 10mAIr = 600µA - 10mA (TO92)

EB714 LM329DZ Vr = 6.925V ± 4.7%Vr / Ir = 20mV / 15mAIr = 600µA - 15mA (TO92)

AA687 LM4040DIZ-10.0 Vr = 10V ± 2%Vr / Ir = 18mV / 15mAIr = 113µA - 15mA (TO92)

ZENER DIODES 500MW 5%

HB243 2.4V HB323 12VHB056 2.7V HB067 13VHB057 3.0V HB068 15V

07.55

HB058 3.3V HB041 16VHB059 3.6V HB069 18VHB060 3.9V HB070 20VHB318 4.3V HB324 22VHB061 4.7V HB325 24VHB062 5.1V HB326 27VHB063 5.6V HB071 30VHB319 6.2V HB327 33VHB064 6.8V HB328 36VHB320 7.5V HB329 39VHB065 8.2V HB330 43VHB321 9.1V HB331 47VHB066 10V HB333 56VHB322 11V HB335 75V

ZENER DIODES 1W 5%

HB336 2.7V HB355 18VHB337 3.3V HB356 20VHB338 3.6V HB357 22VHB339 3.9V HB358 24VHB340 4.3V HB359 27VHB341 4.7V HB360 30VHB342 5.1V HB361 33VHB343 5.6V HB362 36VHB344 6.2V HB363 39VHB345 6.8V HB364 43VHB346 7.5V HB365 47VHB347 8.2V HB366 51VHB348 9.1V HB367 56VHB349 10V AC560 62VHB350 11V AC561 68VHB351 12V AC562 91VHB352 13V HB368 100VHB353 15V FB495 200VHB354 16V

ZENER DIODES 5W 5%

DB581 1N5333B 3.3VDB582 1N5334B 3.6VDB583 1N5335B 3.9VDB584 1N5336B 4.3VDB585 1N5337B 4.7VDB586 1N5338B 5.1VDB587 1N5339B 5.6VDB588 1N5341B 6.2VDB589 1N5342B 6.8VDB590 1N5343B 7.5VDB591 1N5344B 8.2VDB592 1N5346B 9.1VDB593 1N5347B 10VDB594 1N5348B 11VDB595 1N5349B 12VDB596 1N5350B 13VDB597 1N5352B 15VDB598 1N5353B 16VDB599 1N5355B 18VDB600 1N5357B 20VDB601 1N5358B 22VDB602 1N5359B 24VDB603 1N5361B 27VDB604 1N5363B 30VDB605 1N5364B 33VDB606 1N5365B 36VDB607 1N5366B 39VDB608 1N5367B 43VDB609 1N5368B 47VDB610 1N5369B 51VDB611 1N5370B 56VDB612 1N5372B 62VDB613 1N5373B 68VDB614 1N5374B 75VDB615 1N5375B 82VDB616 1N5377B 91VDB617 1N5378B 100V

DIACSDB697 DB3 Diac Vbo=32V It=2AGB330 K1300E70 Sidac Vbo=120 - 138V

1A max. (2 pin TO-92)

VARICAP DIODES

EB920 BB204 FM / VHF 2 varicap diodes36pF/3V, 14pF/30V at 1MHzdouble diodes (TO92)

AC774 BB105 UHF /TV variable cap. diode11.5pF/3V, 2.8pF/25V 1MHzone diode (SOD23 / CE37)

AB989 NTE610 FM / TV variable cap. diode6.8pF/4V, 2.8pF/30V 1MHzone diode (2 pin TO92)

AB990 NTE614 FM / TV variable cap. diode33pF/4V, 12pF/30V 1MHzone diode (2 pin TO92)

AB991 NTE618 AM variable cap. diode420pF/1.2V, 24pF/8V 1MHzone diode (2 pin TO92)

LEDS

Note: A LED (Light EmittingDiode) converts electric currentto light. It can conduct current inonly one direction. Current Ifflows into the LED at the longer,positive lead (anode) and out theshorter, negative lead (cathode).The current should be more than1mA and the maximum is usually20mA. Each LED requires a for-ward voltage Vf to operate. Aprotective resistor R can be con-nected in series with the LED tolimit the current flowing throughit.

How to calculate the resistorvalue R:R = (Vs - Vf) / If OhmwhereVs is the supply voltage usedacross the series LED-resistorcombination

Vf is the voltage across the for-ward biased LEDs terminals

If is the current flowing throughthe forward biased LED andresistor RExample:Supply Voltage (Vs) = 12VLED Voltage (Vf) = 1.7VLED Current (If) = 10mA = 0.01ASeries resistor R = (12 - 1.7) /0.01

= 1030 Ohmthe closest available value is1000 OhmSTANDARD DIFFUSED ROUND LEDs

Note: Max. current: 15mAMax. reverse voltage: 5VIndicated typical forward voltageVf for 10mA LED current.Luminous Intensity Iv (mcd) is

typical.The cathode (negative shorterlead) is denoted by the flat sideon the package.

HB075 3mm Green 2.0V 15 mcdHB074 3mm Red 2.0V 5.0 mcdHB076 3mm Yellow 2.0V 12.5 mcd

HB078 5mm Green 2.0V 20.0 mcdHB077 5mm Red 2.0V 8.0 mcdHB079 5mm Yellow 2.0V 20.0 mcd

FB749 8mm Green 2.0V 20 mcdFB770 8mm Red 1.9V 20 mcdFB768 8mm Yellow 2.0V 20 mcd

AA359 10mm Green 2.0V 20.0 mcdAA382 10mm Red 1.8V 20.0 mcdAA358 10mm Yellow 2.0V 20.0 mcd

Blister pack that contains 30 green 3mm dif-fused 15 mcd LEDs: 30 x (HB075).

ORDER CODE: AB730

Blister pack that contains 25 red 3mm dif-fused 5 mcd LEDs: 25 x (HB074).

ORDER CODE: AB728

07.56

Blister pack that contains 15 yellow 3mm dif-fused 12.5 mcd LEDs: 15 x (HB076).

ORDER CODE: AB731

Blister pack that contains 20 green 5mm dif-fused 20 mcd LEDs: 20 x (HB078).

ORDER CODE: AB722

Blister pack that contains 20 red 5mm dif-fused 8 mcd LEDs: 20 x (HB077).

ORDER CODE: AB721

Blister pack that contains 15 yellow 5mm dif-fused 15 mcd LEDs: 15 x (HB079).

ORDER CODE: AB727

LED CREATIVE SET

The set includes an assortment of approxi-mately 50 LEDs and 20 resistors. Detaileddescription and connecting diagrams areincluded.

ORDER CODE: AA317MANUFACTURED BY: KEMO

MANUFACTURER CODE: S093

LIGHT EMITTING DIODES 30pcs

AB643

A mixed pack that contains 30 LEDs (lightemitting diodes).

ORDER CODE: AB643

5mm RED LEDs 10pcs

AB656

A mixed pack that contains ten 5mm, red,round, diffused LEDs

ORDER CODE: AB656

5mm LEDs RED-GREEN-YELLOW18 PIECES

AB650

A mixed pack that contains 18 LEDs. 5mmround diffused: 3 yellow, 5 green and 10 red

ORDER CODE: AB650

SET WITH 50 GREEN LEDs

Pack of 50 green 5mm LEDs 60 mcd max.Used in the Advertisement Display (GC072).

ORDER CODE: GC073

SET WITH 50 RED LEDs

Pack of 50 red 5mm LEDs 80 mcd max.Used in the Advertisement Display (EB849).

ORDER CODE: GC074

HI-EFFICIENCY ROUND LEDs

Note: Indicated Vf for 10mA LEDcurrent.

AA360 3mm Red 1.8V 20.0 mcdAA361 5mm Red 1.7V 20.0 mcdAA357 10mm Red 1.9V 120.0 mcd

Blister pack that contains 15 hi-efficiency red5mm diffused 20 mcd LEDs: 15 x (AA361).

ORDER CODE: AB729

07.57

SUPER BRIGHT ROUND LEDs

Note: Max. DC current: 20mAMax. reverse voltage: 5VThe following are indicated:forward voltage for 20mA cur-rent,peak radiant emission wave-length,half radiant intensity viewingangle,brightness for specified current.

AD241 5mm Ultraviolet, water clear lens3.8V, 400nm, 20°total radiant flux: 30mW at 20mA(UV light is invisible to human eyes.UV light exposure is harmful to yourskin and eyes. Do not use this LEDwithout appropriate UV protection.Do not look into powered UV LED!)

AA381 3mm Red diffused1.8V 600 mcd

AD250 3mm White water clear3.2V 4500 mcd

AB718 5mm Purple water clear3.5 - 4V 250 mcd

HB080 5mm Blue water clear3 - 3.5V 1500 mcd

AB288 5mm Yellow water clear2V 2800 mcd

AA045 5mm Green water clear2.1V 100 mcd

AB372 5mm Orange transparent1.9V 700 mcd

AB373 5mm Orange water clear2V 50 mcd

AA380 5mm Red diffused 1.9V 300 mcd

DB255 5mm Red water clear1.8V 1800 mcd

AD014 5mm Red water clear2.2V 7000 mcd

AB287 5mm White water clear3.5V 10000 mcd

AD229 5mm White water clear3.2V 20000 mcd

AB562 10mm Red water clear1.77V 2000 - 3000 mcd

Blister pack that contains 2 blue 5mm waterclear 1500 mcd LEDs: 2 x (HB080).

ORDER CODE: AC576

Blister pack that contains 5 yellow 5mmwater clear 2800 mcd LEDs: 5 x (AB288).

ORDER CODE: AB726

Blister pack that contains 10 red 5mm waterclear 1800 mcd LEDs: 10 x (DB255).

ORDER CODE: AB720

Blister pack that contains one white 5mmwater clear 10000 mcd LED: 1 x (AB287).

ORDER CODE: AB719

Blister pack that contains 10 white 5mmwater clear 10000 mcd LEDs: 10 x (AB287).

ORDER CODE: AB746

FLASHING ROUND LEDs

Note: Max. current: 20mABuilt in IC chip, flashes LED onand off. Flashing Rate: 2.0Hz.Voltage Range: 2.1 - 9Vdc

DB245 5mm Green Diffused 5.0 mcdDB244 5mm Red Diffused 20.0 mcdAA443 5mm Yellow Diffused 20.0 mcd

AA442 5mm Super Red Diffused 100 mcd

Blister pack that contains 1 flashing green5mm diffused 5 mcd LED: 1 x (DB245).

ORDER CODE: AC578

07.58

Blister pack that contains 2 flashing red 5mmdiffused 20 mcd LEDs: 2 x (DB244).

ORDER CODE: AC577

MULTI-COLOUR ROUND LEDs

Note: Max. current: 20mAA red and green LED integratedinto one package. For the twoterminal version the colour isdetermined by the polarity of thevoltage applied to the terminalsof the LED. With the three termi-nal LED the center pin is thecathode (negative lead) and theouter pins are the anodes (posi-tive leads) of the red and greenLEDs. Indicated typical forwardvoltage Vf for 15mA LED current.The indicated luminous intensityIv (mcd) is typical.

DB246 5mm Bi-Colour red/green (2 leg)2.0 / 2.1 V, 20.0 / 15.0 mcd

AD218 3mm Bi-Colour orange/green (3 leg)1.7 / 1.7 V, 24 / 30 mcd

DB256 5mm Bi-Colour red/green (3 leg)1.9 / 2.1 V, 20.0 / 15.0 mcd

AA720 5mm Bi-Colour Super red/green1.7 / 2.1 V 500 / 150 mcd (3 leg)

INFRA-RED LEDs

Note: These IR (Infra-Red) LEDsemit light that is invisible to thehuman eye. IR LEDs are used forremote control systems andsecurity sensors.The following are indicated:forward voltage for 20mA cur-rent,peak IR emission wavelength,half radiant intensity viewing

angle,peak radiant intensity for speci-fied current.

HB072 W34F3BT 3mm blue transparent1.2V 940nm 50°10mW/Sr: 20mA

AA471 LD271 5mm grey transparent1.3V: 0.1A pulse 950nm 50°10mW/Sr: 0.1A 20ms pulse

GB464 LD274-3 5mm grey transparent1.3V: 0.1A pulse 950nm 20°80mW/Sr: 0.1A 20ms pulse

AC997 SFH484-2 5mm violet transparent1.5V: 0.1A pulse 880nm 16°80mW/Sr: 0.1A 20ms pulse

EB346 W53F3BT 5mm blue transparent1.2V 940nm 20°20mW/Sr: 20mA

GB527 W53F3C 5mm water clear1.2V 940nm 20°20mW/Sr: 20mA

EB936 L-514EIR1C 5mm water clear1.3V 940nm 20°30mW/Sr: 20mA

GB469 IE-0530HP 5mm water clear1.4V: 0.1A 940nm 60°60mW/Sr: 100mA

PROMINENT PANEL LEDs

Note: Indicated Vf for 15mA LEDcurrent.Max. current: 20mA

FB790 5mm Red 1.8V metalFB791 5mm Green 2.1 - 2.2V metal

Note: Panel mount LEDs withblack, convecs, plastic housingsand insulated leads. Each has amounting nut and requires apanel hole diameter of 7.8mm.Available in 5V or 12Vdc.

5V PANEL MOUNT LEDsGB683 5mm Green 5V / 14mAGB684 5mm Red 5V / 12mAGB685 5mm Yellow 5V / 14mA

12V PANEL MOUNT LEDsGB686 5mm Green 12V / 15mAGB687 5mm Red 12V / 11mAGB688 5mm Yellow 12V / 15mA

Note: Panel mount LEDs withchromed, convecs, plastic hous-ings and insulated leads. Eachhas a mounting nut and requiresa panel hole diameter of 7.8mm.Available in 5V or 12Vdc.

5V PANEL MOUNT LEDsAD055 5mm Green 5V / 14mAAD056 5mm Red 5V / 12mAAD057 5mm Yellow 5V / 14mA

12V PANEL MOUNT LEDsAD058 5mm Green 12V / 15mAAD059 5mm Red 12V / 11mAAD060 5mm Yellow 12V / 15mA

PLASTIC LED HOLDER CLIPS

DB577 3mm LED Holder clipDB576 5mm LED Holder clip

AD228 Rubber 5mm LED Holder

GB508 Concave 5mm LED Holder

GB692 Convex 5mm LED Holder

AB393 Metal 5mm LED Holder

SEGMENTED LED DISPLAYS

Note: 7-Segment, single digit,LED displays.The following are indicated:Colour that LEDs shineCommon connection typeDigit size (height of digit)Package Dimensions: LxWxHForward voltage at 20mA currentTypical brightness at 10mA

AA027 high efficiency red, common anode,digit size 13.2mm, 17.5x12.4x7mm,2V, 6.4mcd

AA028 high efficient red, common cathode,digit size 13.2mm, 17.5x12.4x7mm,2V, 6.4mcd

HB081 super bright red, common anode,digit size 13.2mm, 17.5x12.4x7mm,1.85V, 24mcd

HB082 super bright red, common cathode,digit size 13.2mm, 17.5x12.4x7mm,1.85V, 24mcd

AA887 red, common cathode,

07.59

digit size 57mm, 69.7x47.7x12mm,18mcd

AA884 red, common cathode,digit size 101mm, 122x90x15mm,44mcd

JB225 10 red segments bar graph array,digit size 5.08mm, 25.4x10.2x8mm,1.85V, 31mcd (20 pin DIP)

LASER DIODES

Note: NEVER look into the laseror shine onto someones face.

LASER MODULE

Laser module <3.5mWRed laser (approximately. 670nm)Laser Class IIIaSupply Voltage: 3VdcSupply Current: 30mADimensions: 32mm lenght x 8.1mm dia.

ORDER CODE: FB654

LASER MODULE 1MW 660NM 3VCLASS II

This Laser diode has the following features:Small sizeHigh reliabilityLong lifeSpecifications:1mW Class II laser productSupply Voltage: 3VdcSupply Current: 15 - 20mAWavelength: 650 - 660nm (red)Dimensions:Length: 32.5mmDiameter: 10.5mmLeads: 15cmWeight: 15g

ORDER CODE: FB108

LASER MODULE 2.5MW 670NMCLASS IIIA

Features:Small sizeSmall beam divergenceExcellent beam visibility, even at maximumrange (50m indoors, 200m at night)Specifications:

Supply Voltage : 3Vdc ± 0.2VSupply Current : 45mA2.5mW (class IIIa)Wavelength : 670nm (red)Dimensions: 23mm lenght x 10.5mm dia.Beam Ø : 3.2mmDot Ø : 2mm at 5mLeads : 4cmWeight : 8g

ORDER CODE: FB109

LASER MODULE 3MW 650NM 3VCLASS IIA

Features:Small size650nm / 3mWClass IIIaSpecifications:Supply Voltage : 3VdcSupply Current: 20mADimensions : 39mm lenght x 9mm dia.

ORDER CODE: FB110

KEY CHAIN LASER POINTER

Power Supply: 3 x 1.5V cells LR44 cells 3 x (GB718) (included)Dimensions: 71mm length x 13.5mm dia.Weight: 35g

ORDER CODE: GB368

OPTO COUPLERS

AC565 4N33 Optocoupler high gain dar-lington transistor CTR500%Vce 30V Ic 150mA (DIP6)

EB299 4N35 Optocoupler CTR100%Vce 30V Ic 50mA (DIP6)

AC566 6N136 Optocoupler High SpeedTp = 800ns CTR15%Vce 15V Ic 8mA (DIP8)

DB452 6N138 Optocoupler high gain dar-lington transistor CTR1300%Vce 7V Ic 60mA (DIP8)

DB402 CNY17-3 Optocoupler CTR34%Vce 70V Ic 15mA (DIP6)

AC567 CNY74-2 2 Optocouplers CTR50%Vce 70V Ic 50mA (DIP8)

AC568 CNY74-4 4 Optocouplers CTR50%Vce 70V Ic 50mA (DIP16)

AC569 K3020P Optoisolator Triac Driver400V peak, Ift 30mA (DIP6)

AC954 LTV847 4 Photocouplers CTR50%Vce 35V Ic 50mA (DIP16)

DB403 MOC3021 Optoisolator Triac Driver400V peak, Ift 15mA (DIP6)

EB350 MOC3041 Optoisolator Triac DriverZero-Cross, Ift 15mA (DIP6)

EB820 PC814 Optocoupler CTR20%Vce 35V Ic 50mA (DIP4)

EB819 PC817 Optocoupler CTR80%Vce 35V Ic 50mA (DIP4)

FB244 TLP621 Optocoupler CTR100%Vce 55V Ic 50mA (DIP4)

AC951 TLP621-4 4 Optocouplers CTR100%

Vce 55V Ic 50mA (DIP16)EB129 TLP598G Solid State Relay Iout 0.15A

400V peak, Ift 5mA (DIP6)

GB250 Blue Fibre Optice Emitter Module1.8V LED 20mA max.

GB251 Black Fiber Optic Detector ModulePhotodiode

THYRISTORS (SCR)

HB046 2N5064 Thyristor 0.8A 200V(TO92)

GB323 CR02AM-8 Thyristor 0.8A 400V(TO92)

HB047 TIC106M BT148 Thyristor 4A 600V(TO220)

DB492 BT151 SCR 7.5A 600V (TO220)AC563 TIC126M Thyristor 12A 600V (TO220)AA559 SCF25C60 Thyristor 25A 600V

(TO220F)AA251 2N6509 TYN825 Thyristor 25A 800V

(TO220)

TRIACS

HB050 TIC206M T106M Triac 4A 600V(TO220)

AA535 BT136-600E Sensitive gate Triac 4ATO220

JB135 BT136-600 Triac 4A 600V (TO220)JB066 BT136F-600 Triac 4A 600V Insulated

Tab (TO220)DB559 TIC225M Triac 8A 600V Sensitive

gate 10mA (TO220)AA553 BT137-600E Triac 8A 600V Sensitive

gate 10mA (TO220)AC582 BTA08-600B Triac 8A 600V (TO220)JB064 BT137-600 Triac 8A 600V (TO220)HB048 BT138-600 Triac 12A 600V (TO220)HB049 BT139-600 Triac 16A 600V (TO220)GB645 STF16A60 Triac 16A 600V (TO220)AB286 BTA140-800Triac 25A 800V (TO220)

SENSORS

LIGHT SENSORS

LIGHT DEPENDENT RESISTORS

AB889 LDR 540nm 90mW max. light resistance: 2k - 20k Ohmdark resistance: > 2M Ohm3.5 x 4mm sensor, 33mm leads

GB190 LDR 540nm 90mW max. light resistance: 1k - 6k Ohmdark resistance: > 200k Ohm4.3 x 5.1mm sensor, 33mm leads

DB152 LDR 540nm 200mW max. light resistance: 20k - 50k Ohmdark resistance: > 10M Ohm8 x 9mm sensor, 33mm leads

AB891 LDR 560nm 200mW max.

07.60

light resistance: 18k - 50k Ohmdark resistance: > 5M Ohm10.5 x 12mm sensor, 33mm leads

IR RECEIVER MODULES

AA718 IR 940nm Receiver ModuleRF Shielded 37.9kHz

AC830 IR 940nm Receiver ModuleRF Shielded 56.9kHz

GB283 IR 940nm Receiver ModuleUnshielded 38kHz

AC776 IR 940nm Receiver ModuleUnshielded 40kHz

PHOTO TRANSISTORSAND DIODES

EB281 BP104F Rectangular Pin Photodiodelens with daylight filterspectral sensitivity range:840 - 1080nm, peak=950nmangle of half sensitivity: 120°dark current: 3.8nA / 25°CIsc: 25µA / Ee = 1mW/cm2pin spacing: 5.08mm

Note: Phototransistor with a lensthat filters out daylight

AA472 SFH309FA 3mm NPN Phototransistorlens with daylight filterspectral sensitivity range:770 - 1040nm, peak=900nmangle of half sensitivity: 24°dark current: 200nA max.Ic: 0.8mA / Ee = 1mW/cm2

AC956 SFH203FA 5mm Pin Photodiodelens with daylight filterspectral sensitivity range:780 - 1040nm, peak=900nmangle of half sensitivity: 40°dark current: 1.3nA / 25°CIsc: 50µA / Ee = 1mW/cm2

Note: Phototransistor with awater clear lens

HB073 W32P3C 3mm NPN Phototransistorwater clear lensspectral sensitivity range:450 - 1100nm, peak=940nmangle of half sensitivity: 50°dark current: 100nA max.Ic: 0.1mA / Ee = 1mW/cm2

AA473 PT331C 5mm NPN Phototransistorwater clear lensspectral sensitivity range:450 - 1100nm, peak=940nmangle of half sensitivity: 40°dark current: 100nA max.Ic: 0.7mA / Ee = 1mW/cm2

GB526 W53P3C 5mm NPN Phototransistorwater clear lensspectral sensitivity range:450 - 1100nm, peak=940nmangle of half sensitivity: 20°dark current: 100nA max.Ic: 0.1mA / Ee = 1mW/cm2

GB229 MAL12 NPN Photo-darlingtonTransistor, water clear lensspectral sensitivity range:650 - 1040nm, peak=900nmangle of half sensitivity: 120°dark current: 500nA max.Ic: 1mA / Ee = 1mW/cm2 ifusing white light (2874°K)3 pin (TO18L)

SOUND SENSORS

ULTRASONIC TRANSDUCERS

Ultrasonic Transducer / Sensor Pairdesigned for sending and receiving ultrason-ic sound waves through the air. Specifications:Resonant Frequency: 40kHz ±1kHzRange: 0.2 to 6mDirection Angle: 30ºTemperature Range: -20ºC to +85ºCDimensions:

body: 12mm x 16.2mm diameterleads: 8mm long, 10mm spacing

TRANSMITTER:Input Voltage: 20Vrms max.Sound Pressure: 112dBIdentified by letter ‘T’ on black at the leads

ORDER CODE: AB201

RECEIVER:Sensitivity: -65dBRF shielded around the sides and the back

ORDER CODE: AB200

TEMPERATURE SENSORS

AC917 TC1047A convert temp. to voltagemeasure: -40°C to +125°Cerror: ±1°Ctemp. coeff.: +10mV/°CVo = 750mV at 25°CVs = 2.5 - 5.5V(SMD 3pin SOT23B)

HB123 LM35DZ convert temp. to voltagemeasure: 0°C to +100°Cerror: ±0.9°Ctemp. coeff.: +10mV/°CVo = 250mV at 25°CVs = 4 - 30V (TO92)

AA071 LM335Z convert temp. to voltagemeasure: -40°C to +100°Cerror if calibrated: ±1°Ctemp. coeff.: +10mV/°Cmust calibrate 2.98V at 25°CIr = 400µA - 5mA (TO92)

GB421 DS18B20 temp. to digital 1-wire busmeasure: -55°C to +125°Cerror: -10 to 85°C: ±0.5°Cerror: -55 to 125°C: ±2°Cresolution: 9, 10, 11 or 12-bitVs = 3 - 5.5V (TO92)

AC848 DS1820 temp. to digital 1-wire busmeasure: -55°C to +125°Cerror: -10 to 85°C: ±0.5°Cerror: -55 to 125°C: ±2°Cresolution: 9-bitVs = 3 - 5.5V (TO92)

NTC THERMISTORS

Note: These are temperaturedependant resistors. Each has aNTC (negative temp. coefficient),which means that its resistancewill decrease with an increase intemperature. Suitable for temper-ature measurement and control.Disk diameter: 5mmMaximum Temperature: 125ºCThe internal resistance indicatedbelow is measured at 25ºC.

AC570 100E DB172 10kAD103 200E AD105 20kAC572 500E DB173 50kAA050 1k DB174 100kAD104 2k AC571 150kDB171 5k

07.61

STUD MOUNT NTC THERMISTORS

Note: These stud mount thermis-tors can easily be mounted. Ithas a lower thermal resistancethan the enamel coated type.Suitable for faster temperaturemeasurements. Type K45.Each has a M3 nut and bolt.Bolt length is 7mm.The internal resistance indicatedbelow is measured at 25ºC.

AD013 6.8k

DISPLAYSNUMERICAL DISPLAYS 10pcs

AB654

A mixed pack that contains 10 numerical dis-plays. Contains LED and LCD types.

ORDER CODE: AB654

LCD WITH DRIVER

Note: Each LCD (liquid crystaldisplay) contains a built-in driverIC and can be interfaced to amicroprocessor or computer.Power supply: 5Vdc.

MB086 LCD & driver 16 Characters x 1 line8/4 bit interface

MB087 LCD & driver 16 Characters x 2 line8/4 bit interface

AD101 LCD & driver 16 Characters x 2 line8/4 bit interface with LED backlight

GRAPHICAL LCD MODULE

This is a graphic supertwist LCD modulewith no backlight.

Features:Number of dots (pixels): 128 x 64Duty: 1/64Bias: 1/9Type: positiveSpecifications:LCD type + colour: STN yellow-greenSupply Voltage for LCD driver (Vdd-Vo):

at 0°C: 10.2V typ.at 25°C: 9.4V typ.at 50°C: 9.1V typ.

Supply Voltage for logic (Vdd-Vss):at 25°C: 5.0V typ.

Temperature Range: 0°C to +50°CStorage Temperature: -20°C to +60°COverall Dimensions: 93 x 70mm

Viewing Area: 72 x 40mmDot Size: 0.48 x 0.48mmDot Pitch: 0.52 x 0.52mm

Pin assignment:power supply (GND): 1 (Vss)power supply (+5V): 2 (Vdd)power supply for LCD driver: 3 (Vo)data / instruction: 4 (D/I)data read / write: 5 (R/W)enable signal: 6 (E)data bus lines: 7-14 (DB0 - DB7)chip selection: 15 (CS1)chip selection: 16 (CS2)cup or external CR: 17 (RST)negative voltage: 18 (Vout)

ORDER CODE: AB023

PLAIN LCD

GB154 LCD 3 1/2 Digit (VI-302-DP-RC)GB268 LCD 4 1/2 Digit (VI-509-DP-RC)

RADIO AND TV

RF TRANSMITTER/RECEIVER MODULES

TRANSMITTER MODULE TX433N

AB341

This is a compact AM radio transmitter mod-ule with SMD components. It is suitable forremote controls and telemetry over a dis-tance of up to 15m, single direction (sim-plex). No adjustments are required. It has astable output carrier frequency. This deviceworks with (AB342).Specifications:Pin Numbers:

1: GND (negative supply rail 0V)2: Data Input3: Vcc (positive supply rail 12Vdc max.)4: Antenna OutputSupply Voltage: 3 - 12VdcSupply Current: 45mA / 12VdcCarrier Frequency: 433.92MHzSAW ResonatorDigital Date Rate: max. 8 kbits per sec.Digital Signal Modulation: 50% duty-cycle,

on-off keying/ASK (amplitude shift keying)RF Output Power: 10mWAntenna: can be connected (not included)Dimensions: 17 x 10 x 4mm

ORDER CODE: AB341

RECEIVER MODULE RX433

AB342

This is a compact AM radio receiver modulewith SMD components. It is suitable forremote controls and telemetry, single direc-tion (simplex). No adjustments are required.This device also works with (AB341).Specifications:Pin Numbers:1: GND (negative supply rail 0V)2: Digital Output3: Analogue Output4: Vcc (positive supply rail 12Vdc max.)5: Vcc (positive supply rail 12Vdc max.)6: GND (negative supply rail 0V)7: GND (negative supply rail 0V)8: Antenna InputSupply Voltage: 5VdcSupply Current: 4.5mACarrier Frequency: 433.92MHzHigh Sensitivity LC Passive DesignRange: max. 200m in the open airDigital Data Rate: max. 4.8 kbits per sec.Demodulation:

AM and also ASK (amplitude shift keying)Receiver Turn-on Time: 3msec. max.1 digital output and 1 analogue outputRF Input Sensitivity: -106dBm, (3µVrms)Antenna: can be connected (not included)

or just use wire 30 - 35cm longDimensions: 43.5 x 11.5 x 9.5mm

ORDER CODE: AB342

FM RADIO TRANSMITTER MODULEFOR AUDIO SIGNALS

AB612

This is a compact FM radio transmitter mod-ule. It makes use of thick-film, hybrid circuittechnology and SMD components. It is suit-

07.62

able for high quality audio radio transmis-sion, radio telemetry of analogue signals andradio remote control (DTMF) systems.This module has an on / off power switch. Ithas two separate audio frequency, voltageamplifiers: AMP1 and AMP2. An externalpre-emphasis filter network can be connect-ed between the output of AMP1 and theinput of AMP2. The centre frequency of theoutput radio carrier wave is determined by aSAW resonator. The frequency is modulatedby means of a varicap diode. A 50 Ohmantenna should be connected at the outputof the matching network. No adjustments arerequired. It can only transmit and therefore itoperates in a simplex mode. This moduleworks together with the FM radio receivermodule (AB611).Specifications:Supply Voltage: 12VdcSupply Current: 15mACarrier Centre Frequency (fc): 433.8MHzFrequency Modulation Range: fc±75kHzAudio Signal Frequency Bandwidth:

20Hz - 30kHzDigital Date Rate: 10kHz max. 50% duty-

cycle ASK (amplitude shift keying)Transmitter Turn-on Time: 100µsec. max.Turn-on Voltage Range: 5 - 12VTurn-off Voltage Range: 0 - 0.5VAMP Input Impedance: 10 kOhmAMP1 Input Voltage Range: 0 - 100mVppAMP1 Voltage Gain: 20AMP2 Input Voltage Range: 0 - 2Vpp

2Vpp for maximum frequency modulationAMP2 Voltage Gain: 5RF Output Impedance: 50 OhmRF Output Power: +10dBm max.

(into a 50 Ohm load)Antenna: 50 Ohm at 433.8MHz

can be connected (not included)Dimensions: 41 x 19 x 4.5mm

ORDER CODE: AB612

FM RADIO RECEIVER MODULEFOR AUDIO SIGNALS

AB611

This is a compact, FM, super-heterodyneradio receiver module. It makes use of thick-film, hybrid circuit technology and SMD com-ponents.A single mixer stage is used in the FMdemodulation process. The local oscillator,which is used for mixing, is built around aSAW resonator. A squelch output is availablefor switching on any external audio amplifierwhenever the received signal power is largerthan the squelch level. The squelch thresh-old level is externally adjustable. It is possi-ble to connect a de-emphasis filter networkat the audio output. No on-board adjust-ments are required. It can only receive andtherefore it operates in a simplex mode. Thismodule works together with the FM radio

transmitter module (AB612).Specifications:Supply Voltage: 3VdcSupply Current: 15mA max.Carrier Centre Frequency (fc): 433.8MHzReception Frequency Range: fc±75kHzRF Input Impedance: 50 OhmAntenna: 50 Ohm at 433.8MHz

can be connected (not included)RF Input Sensitivity: -100dBmAudio Signal Frequency Bandwidth:

20Hz - 20kHzAudio Output Impedance: 1.5k OhmAudio Output Voltage Range:

1.2V DC-offset + 0 - 100mV audio signal100mV for maximum frequency modulation

Squelch Level Range: (externally adjustable)sensitivity: -50dBm min. to -100dBm max.

Squelch Output Current: 100mA max.Dimensions: 51 x 20 x 8mmRequired: (not included)20k Ohm Preset potentiometer for adjustingthe squelch level: (DB707)

ORDER CODE: AB611

ANTENNA TO TX/RXSELECTOR SWITCH MODULE

This is a fast electronic antenna switchSPDT module. No mechanical contacts. Itconnects 1 antenna to either 1 transmit or 1receive signal line used in Tx-Rx systems.Specifications:Working Frequency: 433.92MHzRF Bandwidth: 20MHzSwitching Time: < 100µsec.Input/Output Impedance: 50 OhmSwitchable RF Power: 20dBm max.Insertion Loss:

Receiving (Ant-Rx): ~ 0.5 dBTransmitting (Tx-Ant): ~ 1.1 dB

Supply Current:Receiving: (zero current consumption)with 0V control signal voltageTransmitting: ~ 10mAwith 5Vdc control signal voltage

Dimensions: 20.5 x 14.6 x 3mmORDER CODE: AB156

RF MODULATOR MODULE (RFMOD)

This is a compact RF modulator module. Itconverts PAL composite video and line-level

audio signals into UHF television signals.The modulator uses the PAL-system G.Connections:Pin Numbers:1: Video Input2: Audio Input3: Vcc (positive supply rail 5Vdc)4: GND (negative supply rail 0V)5:Vcc (positive supply rail 5Vdc)RF Output: PAL Plug (male) at top rightAntenna Input: PAL Socket at bottom rightChannnel Selector: screw at top leftSpecifications:Supply Voltage: 5VdcSupply Current: 60mASystem: PAL-GPreset channel: CH36Adjustable Channel Range: CH28 - CH41Built-in test signal B/W pattern generatorDimensions: 44 x 50 x 28mm

ORDER CODE: AB416

UHF TV CHANNEL 22AUDIO/VIDEO MODULATOR

Low-cost CATV circuit for transmitting high-quality audio/video signals in the UHF band.Input signals can be fed from video cameras,tuners, video tape players, etc... Makesdirect use of the signal lines of a standard-ised output connectors (i.e. SCART). A stan-dard TV receiver receives this output RF sig-nal.Specifications:Carrier Frequency: 479.5MHzSupply Voltage: 5VdcSupply Current: 90mARF Output Power: 2mW (75 Ohm load)Dimensions: 29.5 x 25.5 x 8mm

ORDER CODE: AB026

UHF TV CHANNEL 22CATV AMPLIFIER

Linear CATV circuit for high quality audio /video signal amplification, operating on theUHF TV Channel 22. The RF input signalcan be derived from an audio/video modula-tor (AB026). Its amplified RF output can bereceived with any standard TV receiver.Specifications:Working Frequency: 479.5MHzSupply Voltage: 12VdcSupply Current: 100mA

07.63

RF Output Power: 19dBm (75 Ohm load)Dimensions: 38.2 x 22 x 4.2mm

ORDER CODE: AB027

TV AMPLIFIERS

TV MASTHEAD AMPLIFIERS

Note: TV masthead amplifiers areused to boost weak TV signalsfrom the aerial. Most amplifiershave separate VHF and UHFinputs for each aerial and onecombined output that goes to thepower supply. The output coaxialcable from the amplifier carriesthe TV signals as well as 12V DCpower for the amplifier. Amplifiergain for each aerial can be variedwith the adjustment screws.

GB563 TV Masthead Amp.25dBVHF/25dBUHF 12V/55mA



12VDC/120MA POWER SUPPLYFOR TV AMPLIFIER 230VAC

TV masthead amplifiers are used to amplifyweak TV signals coming directly from the TVantenna. This power supply powers the TVmasthead amplifier and also provides a TVsignal path between the amplifier and TVset. This power supply is powered by230VAC. It supplies a maximum current of120mA at 12VDC and exhibits a signal lossof approximately 1 dB.

ORDER CODE: FB486

12VDC/60MA POWER SUPPLYFOR TV AMPLIFIER 230VAC

TV masthead amplifiers are used to amplifyweak TV signals coming directly from the TVantenna. This power supply powers the TVmasthead amplifier and also provides a TVsignal path between the amplifier and TVset. This power supply is powered by230VAC. It supplies a maximum current of60mA at 12VDC and exhibits a signal loss ofapproximately 1 dB.

ORDER CODE: FB485

ANTENNAS

Note: Antennas that are mountedexternally on a mast. Suppliedwith mast mounting clamp thatcan be mounted for vertical orhorizontal polarization.Lightweight aluminium construc-tion. UV and corrosion protected.High antenna gain is good forreceiving weak radio signals.High front to back Ratio is goodfor minimising signal ghosting.Beam width is an indication ofthe antenna’s directivity.Directivity is good for long-dis-tance reception only when theantenna is directed exactlytowards the transmitting, (radiostation), antenna.

RADIO FM AERIAL 3 ELEMENTS

Forward Gain: 5 dBFront to Back Ratio: 15 dBHorizontal Beam Width: 70ºDimensions:

1190mm long x 1610mm wideORDER CODE: AB024

RADIO FM AERIAL 5 ELEMENTS

Forward Gain: 8.5 dBFront to Back Ratio: 22 dBHorizontal Beam Width: 58ºDimensions:1720mm long, 1610mm wide, 900mm height

ORDER CODE: AB025

TV VHF AERIAL 13 ELEMENTS

Forward Gain: 9 - 12 dBFront to Back Ratio: 26 dBHorizontal Beam Width: 44ºDimensions:3000mm long, 850mm wide, 500mm height

ORDER CODE: AB369

RELAYSRELAYS 5pcs

AB645

A mixed pack that contains 5 relays.ORDER CODE: AB645

REED RELAYS

Note: These epoxy moulded reedrelays are ideal in circuits requir-ing high density packing. Meantfor low current, dry contactswitching with minimum switchbounce.

07.64

EB143 Reed Relay 5V / 500 Ohm Coil0.5A Contacts SPST8 contacts fits a 0.3 inch (DIP14)

AC901 Reed Relay 12V / 1k Ohm Coil0.5A Contacts SPST8 contacts fits a 0.3 inch (DIP14)

AC902 Reed Relay 5V / 200 Ohm Coil0.5A Contacts SPDT8 contacts fits a 0.3 inch (DIP14)

AC903 Reed Relay 12V / 500 Ohm Coil0.5A Contacts SPDT8 contacts fits a 0.3 inch (DIP14)

PCB MOUNT RELAYS

DB404 Relay 5V, 75 Ohm Coil240V 6A Contacts SPDT17.5 x 22.5mm, 15mm height

DB724 Relay 5V, 160 Ohm Coil1.2A Contacts DPDT (DIL) 0.3 inch10 x 21mm, 12mm height

AD149 Relay 5V, 61 Ohm Coil8A Contacts, DPDT (DIL)13 x 29mm, 16mm height

GB284 Mini Relay 12V, 950 Ohm Coil1A Contacts SPDT7.5 x 12.5mm, 10mm height

AD051 Mini Relay 6V, 90 Ohm Coil1.5A Contacts SPDT10.5 x 16mm, 12.5mm height

GB177 Mini Relay 12V, 360 Ohm Coil1.5A Contacts SPDT10.5 x 16mm, 12.5mm height

GB164 Mini Relay 12V, 400 Ohm Coil1.5A Contacts SPDT16 x 19.5mm, 16mm height

DB003 Relay 12V, 320 Ohm Coil240V 10A Contacts SPDT17.5 x 22.5mm, 15mm height

Blister pack that contains one PCB mount12V coil relay 10A (SPDT): 1 x (DB003).

ORDER CODE: AB740

AC897 Relay 12V, 270 Ohm Coil10A Contacts, SPDT13 x 29mm, 16mm height

AD156 Mini Automotive Relay 12V Coil20A Contacts SPDT12 x 13mm, 10mm height

AD124 Automotive Relay without a casing12V, 88 Ohm Coil12V 30A Contacts SPDT19 x 23mm, 18mm height

GB497 Automotive Relay 12V, 80 Ohm Coil12V 30A Contacts SPDT21 x 26.5mm, 21.5mm height

JB050 Relay 12V, 320 Ohm Coil1A Contacts DPDT (DIL) 0.3 inch10 x 20.5mm, 12mm height

GB184 Relay 12V, 360 Ohm Coil8A Contacts, DPDT (DIL)13 x 29mm, 16mm height

AD126 Relay 12V, 270 Ohm Coil

07.65

16A Contacts, SPDT (DIL)13 x 29mm, 16mm height

DB726 Relay 24V, 1200 Ohm Coil240V 5A Contacts, SPDT17 x 22mm, 15mm height

DB725 Relay 24V, 3800 Ohm Coil1.2A Contacts DPDT (DIL) 0.3 inch10.5 x 21.5mm, 12.5mm height

AD125 Relay 24V, 1100 Ohm Coil10A Contacts, SPDT13 x 29mm, 16mm height

AD127 Relay 24V, 1100 Ohm Coil16A Contacts, SPDT (DIL)13 x 29mm, 16mm height

AA202 Mains Relay 230Vac, 26k Ohm Coil250V 8A Contacts, DPDT (DIL)12.5 x 29mm, 25.5mm height

PLUG-IN RELAYS

GB666 Automotive Relay 12V, 80 Ohm Coil12V 30A Contacts, SPSTDimensions:Base: 26.5 x 28.5mmHeight: 25mm without the tag41mm with the 16mm tag included

AD239 Automotive Relay 12V, 92 Ohm Coil12V 30A Contacts, SPDTDimensions:Base: 26.5 x 28.5mmHeight: 25mm without the tag41mm with the 16mm tag included

AC899 In-line Socket for Plug-in Relay,with 60cm wires

AC900 PCB Mount Socket / Basefor Plug-in Relay

SWITCHES

TACTILE / KEYBOARDSWITCHES

Note: PCB, through-hole mount-ed, press to make click actionswitches (Tactile). These switch-es are all single pole, that is only1 switch contact is made whenpressed. Height is measuredfrom the base of the switch tothe knob tip.

GB189 Miniature Tactile PCB Switch,3.6x6mm base, 5mm height

DB397 4.3mm height, 6x6mm baseDB398 5mm height, 6x6mm baseDB396 5.5mm height, 6x6mm baseDB399 7mm height, 6x6mm baseGB149 13mm height, 6x6mm base

GB706 Wide, Flat, PCB, Tactile Switch,operating force: 160g (1.56N),12 x 12mm base, 4.3mm height

AC817 Wide, PCB, Tactile Switch with stemthat is square and can take a cap,operating force: 160g (1.56N),12 x 12mm base, 7.3mm height

07.66

Note: Square Switch Caps that fiton top of tactile switch (AC817).Cap Dimensions: 12 x 12 x 4mm

AC813 BlackAC814 BlueAC815 RedAC816 Ivory

FB724 90° Tactile PCB Switch, 6x6mm,8.3mm from leads to knob tip

GB159 Tactile Keyboard PCB Switch,12x12mm red square, 11mm height

AC896 Tactile Keyboard PCB Switch,12x12mm red round, 11mm height

KEYPADS

Note: Key pads for limited dataentry. Mounted from the front orrear. Dustproof construction.Gold-plated contacts, low currentswitching max. 20mA / 24V, con-tact resistance less than 200Ohms.

GB178 Key Pad 12 Keys, 3x4 (x-y)matrix switch connection outputsfits key pad enclosure (AA044)

AB471 Key Pad 12 Keys, 3x4 (x-y)separate switch outputsfits key pad enclosure (AA044)

EB428 Hex Keypad 16 Keys (4x4)matrix switch connection outputs

PUSH-BUTTON SWITCHES

SWITCHES AND KEY BUTTONS20 PIECES

A mixed pack that contains 20 switches.ORDER CODE: AB638

AD233 Panel push to make NO Switchnickel plated brass, 5A / 250V, M19

22mm diameter x 27mm height

Note: 8-Sided panel mount push-button switches. Maximum 3A /250V

GB725 push to make, NO, M12, redFB493 latching, M12, red

Note: Square panel mount push-button switches. Maximum 3A /250V

GB724 push to make, NO, M12, blackJB213 latching, M12, black

Note: Round panel mount push-button switches. Maximum 3A /250V

GB723 push to make, NO, M12, blackJB212 latching, M12, black

GB665 Panel Push to Make NO Switchblack, 4-sided knob, M10, 1A

FB819 Panel Push-Button Switch, SPDTNO / NC contacts, M6.3, 2A

AB470 Switch Cap for (FB819), black9.35mm diameter x 6.2mm height

AA686 Panel push to break NC Switch,red round knob, M6.9, 0.5A

07.67

HB209 Panel push to make NO Switch,red round knob, M6.9, 0.5A

AB002 Panel push to make NO Switch,black round knob, M6.9, 0.5A

AB289 Panel push to make NO Switch,white round knob, M6.9, 0.5A

Blister pack that contains 2 red, push tomake, NO switches: 2 x (HB209).

ORDER CODE: AB742

Blister pack that contains 2 black, push tomake, NO switches: 2 x (AB002).

ORDER CODE: AB743

GB246 90° PCB Push-Button Switch,DPDT, 7.4x9x14.6mm, 0.1A

GB247 Knob for Switch (GB246)

FB823 90° PCB push to make Switch, 6x8.2x10mm, 0.5A

PIN SWITCH 7 X 65MM

Panel mount pin switch with adjustable pinprotrusion distance.It is open-circuit when pushed.Single NC (normally closed) contactDimensions :

panel hole 7mm diameterpin lenght 20mmtip-to-tip length 65mm

ORDER CODE: FB091

SHORT PIN SWITCH 8 X 49MM

Short pin, panel mount pin switch.It is open-circuit when pushed.Single NC (normally closed) contact.Dimensions :

panel hole 8mm diameterpin lenght 11mmtip-to-tip length 49mm

ORDER CODE: FB092

MICRO SWITCHES

AA640 Micro switch no lever5A / 250V (SPST)

AA669 Micro switch no lever5A / 125Vac and 3A / 250Vaccom, n/o and n/c pins (SPDT)

EB528 Micro switch with 37mm lever5A / 125Vac and 3A / 250Vaccom, n/o and n/c pins (SPDT)

EB188 Micro switch with 54mm lever12A / 125Vac and 6A / 250Vaccom, n/o and n/c pins (SPDT)

Blister pack that contains one micro switchwith 54mm lever 6A / 250Vac: 1 x (EB188).

ORDER CODE: AB737

AB261 Micro switch with 26mm lever and4.8mm diameter roller12A / 125Vac and 6A / 250Vaccom, n/o and n/c pins (SPDT)

ROCKER SWITCHES

AA628 Panel Rocker Switch, 1P on-on,(SPDT), 21x13x19mm, black, 3A

AD011 Panel Rocker Switch, 2P on-on,(DPDT), 34x25x26mm, black, 10A

AD012 Panel Rocker Switch, 2P on-off-on,(DPDT), 34x25x26mm, black, 10A

EB183 Surface Switch, SPST,18x45x60mm, white, M3.5, 6A

TOGGLE SWITCHES

Note: Switching notation for tog-07.68

gle switches:On-On: only 2 possible positionsOn-(On): 2 positions with aspring forcing the lever to onesideOn-Off-On: 3 possible positionswith all contact pins disconnect-ed when the lever is in the centreposition(On)-Off-(On): 3 possible posi-tions with all contact pins dis-connected when the lever is inthe centre position and the leveris forced to the centre positionby springs

SPST: 1pole (single pole), 1xway(single throw)SPDT / 1PDT: 1pole, 2xway (dou-ble throw)DPDT / 2PDT: 2pole (doublepole), 2xway

FB820 90° PCB mini Toggle, 1P on-on,(SPDT), 1.5A

FB817 90° PCB Toggle, 1P on-off-on,(SPDT), 2A

FB821 90° PCB/Panel Toggle, 1P on-on,(SPDT), 1.5A

FB822 90° PCB mini, 2P on-on,(DPDT), 1.5A

FB824 90° PCB Toggle, 1P on-on,(SPDT), 2A

FB825 90° PCB Toggle, 2P on-on,(DPDT), 2A

FB818 90° PCB Toggle, 2P on-on,

(DPDT), 2A

FB798 Panel mini, 1P on-on,(SPDT) 13.2x5.1x8.2mm,M5, 1.5A

FB803 Panel mini, 2P on-on,(DPDT) 12.7x8.3x9.2mm,M5, 1.5A

Blister pack that contains one mini panelmount (SPDT) toggle switch: 1 x (FB798).

ORDER CODE: AB725

Note: 1 pole, panel mount, toggleswitch

FB806 (on)-off-(on), 13x7x12.8mm,(SPDT) M6.3, 2A

FB805 on-(on), 13x6.9x12.8mm,(SPDT) M6.3, 2A

FB807 on-off-(on), 13x6.9x12.8mm,(SPDT) M6.3, 2A

AA379 on-off-on, 13x7x12.8mm,(SPDT) M6.3, 2A

DB017 on-on, 13.3x8x13mm,(SPDT) M6.3, 2A

Blister pack that contains one panel mount(SPDT) toggle switch: 1 x (DB017).

ORDER CODE: AB739


FB809 (on)-off-(on), 13x11.5x12.8mm,(DPDT) M6.3, 2A

FB808 on-(on), 13x11.6x12.7mm,(DPDT) M6.3, 2A

FB810 on-off-(on), 13x11.5x12.7mm,(DPDT) M6.3, 2A

FB801 on-off-on, 13x11.5x12.7mm,(DPDT) M6.3, 2A

DB252 on-on, 13x11.5x12.8mm,(DPDT) M6.3, 2A


FB811 on-(on), 14.5x12.7x16.6mm,(3PDT) M6.3, 2A

FB813 on-off-(on), 14.6x12.8x16.7mm,(3PDT) M6.3, 2A

FB799 on-off-on, 15.5x12.8x16.9mm,(3PDT) M6.3, 2A

FB800 on-on, 14.7x12.8x16.6mm,(3PDT) M6.3, 2A

FB812 (on)-off-(on), 14.6x12.9x16.7mm,(3PDT) M6.3, 2A


FB815 (on)-off-(on),14.5x12.7x22mm,(4PDT) M6.3, 2A

FB804 on-off-on, 15x12.8x21.9mm,(4PDT) M6.3, 2A

AA576 on-on, 15.2x13.1x23mm,(4PDT) M6.3, 2A

EB184 Panel Toggle, 1 pole, (SPST),20.3x14x25mm, M11.9, 2A

AD107 Panel Toggle, 1 pole, on-on,(SPDT) 33x20x29mm,M12.2, 10A / 250Vac

EB187 Panel Toggle, 1 pole, on-off-on,

07.69

(SPDT) 33x20x29mm,M12.2, 10A / 250Vac

EB186 Panel Toggle, 2 pole, on-off-on,(DPDT) 27x19.7x32.5mm,M11.8, 10A / 250Vac

SLIDE SWITCHES

DB304 Panel Slide Switch, (DPDT),11.7x7.3x13.2mm, M2, 0.1A

EB229 PCB Slide Switch, (4PDT),12x9.5x29mm, M2.5, 0.1A

EB228 PCB Slide Switch, (DP3T),11.5x9x25mm, M2.5, 0.1A

GB169 PCB Slide Switch, (DPDT),5x7x8.7mm, 0.05A

GB156 PCB Slide Switch, (SPDT),5x4.5x8.7mm, 0.05A

GB338 90° PCB Slide Switch, (DPDT),5x7x9mm, 0.05A

DB303 90° PCB Slide Switch, (SPDT),6x5x12mm, 0.1A

DIP SLIDE SWITCHES

DB680 2 way DB684 6 wayDB681 3 way DB685 8 wayDB682 4 way DB686 10 wayDB683 5 way DB687 12 way

ROTARY ENCODERS

This switch encodes the turning directionand incremental rotation of its axis.Specifications:24 pulses / rotationoutput phase difference angle:2 signals 54°±30° phase differencerotation angle: 360°rotational life: 100 000 rotations

ORDER CODE: GB483

BCD-SWITCH

This is a PCB mountable, rotary switch thathas BCD (binary coded decimal) output pins.The switch encodes the numeric value indi-cated by the adjustable pointer in the centre.Specifications:Number of Positions Selectable: 10Encoded Decimal Values:

0, 1, 2, 3, 4, 5, 6, 7, 8, 9Output Pins:

4 pins to represent the binary code and2 common pins

Contact Rating: 100mA / 5VdcRotation Angle: 360°Operating Temperature: -10°C to +80°C

ORDER CODE: AD080

ROTARY SWITCHES

HB315 4 pole 3 positionsHB314 3 pole 4 positions

HB313 2 pole 6 positionsHB312 1 pole 12 position

KEY SWITCHES

KEY SWITCH IN BOX

Change-over key switch fitted in attractiveweather proof housing for outdoor use.Tamper protected. 3 Keys are provided thatcan be removed in both positions. Keyswitch is off-set in housing for easy opera-tion. Contains 1 fitted LED.

ORDER CODE: PB041

KEY SWITCH SPRING LOADED

Spring loaded normally open Key Switchwith 2 round keys provided. The key can beremoved in only one position. Ideal for bur-glar alarms and security systems. The switchhas two solder bucket terminals at the rear.Fixing nut included.Bezel diameter: 20mmPanel cutout: 19mm diameter, 17mm acrosswith flat sides (provided to prevent twisting).Bush length: 38mm

ORDER CODE: AA932

GB680 Panel Key Switch, DPST, round-key, removable in both positionsM19, 2A

AA200 Panel Key Switch, SPST, round-key, removable in both positionsM12, 0.5A

KEY SWITCH 1 POLE ON-OFF

Double bitted flat key switch (SPST). It has 2keys and 2 solder bucket terminals. Only 2

07.70

positions are possible: on or off (not springloaded). The key can be removed in bothpositions. It has a dust shutter that keepsdust out and makes lock picking difficult. It isideal for burglar alarms and security sys-tems.Specifications:switch: 1P on-off (SPST)Contact Rating: 2A / 250VACmax. Panel Thickness: 19mmMounting Hole Diameter: 19mma fixing nut and 2 keys are includedkey can be pulled in both positionsdustproof150 combinations available

ORDER CODE: HB016

JB052 Panel Key Switch, DPST, flat-key,removable in both positionsM19, 2A

TILT SWITCHES

AB415 PCB Mount Roller Ball Tilt SwitchDimensions: 5 x 5 x 12.7mmRating: 24Vdc / 25mA, 10 Ohm

DB747 Roller Ball Tilt Switch with metalhousing, 18mm long x 5.5mm dia.29mm leads, (SPST), 100mA

TIME SWITCHES

MECHANICAL DAILY TIME SWITCH(24HRS)

The time switch is ideal to use for householdappliances that need to be switched on andoff daily for a set period of time. The timerworks directly from 230VAC.

ORDER CODE: EB213

REED SWITCHES

EB141 15x2mm glass body, 0.5A 200V0.15 Ohm contact resistance (no)

PERMANENT MAGNETS

DB001 Cylindrical Permanent Magnetshiny metallic AINiCo5mm diameter, 16mm length

AC832 Cylindrical Permanent Magnetdull black ferrite32mm diameter, 12mm length

AC833 Cylindrical Permanent Magnetdull black ferrite22mm diameter, 25mm length

AC831 Bar Shaped Permanent Magnetdull black ferrite50 x 19 x 5mm

AD244 Bar Shaped Permanent Magnetdull black ferrite45x20x10mm

AD245 Bar Shaped Permanent Magnetshiny metallic Nickel-platedNeodymium-Iron-Boron compound20x10x5mm

AD246 Bar Shaped Permanent Magnetshiny metallic Nickel-platedNeodymium-Iron-Boron compound50x20x8mm

LOUDSPEAKERSAND SOUND

PIEZO TRANSDUCERS

Note: A Piezo Transdusers con-sists of a ceramic piezo-elementthat is glued to a metal vibrationplate. It needs an externally driv-en oscillating voltage to sound.Low current drain.

GB158

PCB mount Piezo Transducer with 2 pins.Resonant frequency is 2.048kHz. Voltagerange: 1-20Vac / 1mA. Sound pressure:80dBA / 10cm . Diameter: 13.8mm, height:7mm, pin spacing: 7.6mm. (needs driver)

ORDER CODE: GB158

Piezo Transducer with leads. Resonant fre-quency is 4.5kHz. Voltage: 3-28Vac, rated5Vac / 1.5mA. 90dB Sound pressure. Roundpart: 30mm dia., 5.5mm height, 35mmspaced mounting holes. (needs driver)

ORDER CODE: JB037

BUZZERS

Specifications:Supply voltage: 3-6VdcRated Voltage: 5VdcSupply Current: 25mAOscillating Frequency: 3.2kHzSound Pressure: 87dBRound Part: 12mm dia., 7.5mm heightPin Spacing: 7.6mmPCB Mount

07.71

ORDER CODE: GB176

Specifications:Supply voltage: 8-16VdcRated Voltage: 12VdcSupply Current: 15mAOscillating Frequency: 3.2kHzSound Pressure: 85dBRound Part: 12mm dia., 7.5mm heightPin Spacing: 7.6mmPCB Mount

ORDER CODE: AD018

JB035 Solid State Buzzer with leads3-7Vdc 20mA,33x16mm, 15mm height

Blister pack that contains one 3 - 7Vdc solidstate buzzer with leads: 1 x (JB035).

ORDER CODE: AB723

Specifications:Supply voltage: 4-15VdcRated Voltage: 12VdcSupply Current: 15mAOscillating Frequency: 2.8kHzSound Pressure: 85dBRound Part: 28mm dia., 14.5mm heightSpacing of Holes: 34mmPin Spacing: 14mmPCB Mount

ORDER CODE: JB036

Blister pack that contains one 4 - 15Vdcsolid state buzzer with pins: 1 x (JB036).

ORDER CODE: AB724

Specifications:Supply Voltage : 3-16VdcRated Voltage : 12VdcSupply Current: 15mAOscillating Frequency: 3.7kHzSound Pressure : 85dBDimensions: 23.4mm dia., 18mm heightPCB Mount

ORDER CODE: FB246

PENETRATING TONE BUZZER

Specifications:Supply voltage: 1-13VdcRated Voltage: 12VdcSupply Current: 30mAOscillating Frequency: 2.9kHzSound Pressure: 105dBDimensions: 45mm dia., 26mm heightPCB Mount

ORDER CODE: GB682

HEADPHONES

SINGLE EARCUP HEADPHONE

Features:Ø 27mm drive unitSpecifications:drive unit: Ø 27mm mylar speaker with anisotropic ferrite magnetfrequency response: 20 - 18000Hzimpedance: 32 ohmsensitivity: 101dB3.5mm nickel-plated plug

cable length: 1.2mmax. power input: 100mW

ORDER CODE: HB208

STEREO IN-EAR PHONES

Features:Comes with: 3.5mm/6.35mm adapter and 2foam padsSpecifications:Transducer type: dynamicFrequency Response : 20 - 20000HzImpedance: 32 OhmMaximum Power: 50mWSensitivity : 102dBWeight: 5g

ORDER CODE: GB742

STEREO HEADPHONE SET

Specifications:Impedance: 32 ± 4 OhmSensitivity: 101dB ± 3%Frequency Response: 20Hz - 20kHzMaximum Output Power: 30mWMagnets: anisotropicCable Length: 1.2m with 3.5mm L-plugWeight: 56g

ORDER CODE: AB417

MULTIMEDIA STEREOHEADSET AND MICROPHONE

Features:

07.72

Professional designFor multimedia applicationsHeadphones with MicrophoneSpecifications:Headphones:Drive Unit: 30mm diameter mylar coneImpedance: 30 OhmSensitivity: 106dBFrequency Response: 20Hz - 20kHzMaximum Output Power: 100mWCable of 1.8m with 3.5mm plug at the end

Microphone:Supply Voltage: 1.5V to 12VSupply Current: 0.8mAElectret Condenser Type: 10mm diameterDirectivity: omnidirectionalSensitivity: -58 ± 3dBOutput Impedance: lowFrequency Response: 30Hz - 16kHzCable of 1.5m with 3.5mm plug at the end

ORDER CODE: AB420

MICROPHONES

HB273 Microphone Electret Condenser10mm diameter (please connectthe two negative leads together)

Blister pack that contains one electret con-denser microphone 10mm dia.: 1 x (HB273).

ORDER CODE: AB744

AA717 Suction Cup

GB507 Unidirectional DynamicMicrophone

SPEAKERS

MINIATURE SPEAKER

This is a miniature loudspeaker that can beused inside office equipment, telephones,music boxes etc.Specifications:Impedance: 8 OhmPower Rating: 150mW maximumFrequency Range: 670 - 3000HzSound Pressure: 85dB

(at 1kHz / 100mW, at 10cm from speaker)Dimensions: 29mm diameter, 7mm thickWeight: 8.2g

ORDER CODE: AA724

MB056 8 Ohm 0.5W round, 50mm diameterGB820 8 Ohm 1W round, 57mm diameterPB244 8 Ohm 1W round, 77mm diameterGB821 8 Ohm 2W round, 66mm diameterGB822 8 Ohm 2W round, 101mm diameter

MINI-PIEZOELECTRIC TWEETER

This is a mini-piezoelectric tweeter. It con-sists of a piezo transducer with an aluminiumspherical cap mounted onto it. The tweeterhas a flanged open frame mounting. It isideal for reproducing sound of higher fre-quencies.Specifications:Frequency Range: 2.5 - 45kHzMaximum Input Voltage: 20Vp-pSpacing of Holes: 37.5mmRound Part: 30mm diameter, 14mm height

ORDER CODE: AA526

PIEZOELECTRIC TWEETERWITH FLARE

This is a piezoelectric tweeter that has a rec-tangular flare. It has a built-in piezo trans-ducer with an aluminium spherical capmounted onto it. It is ideal for reproducingsound of higher frequencies.Specifications:Frequency Range: 2.5 - 45kHzMaximum Input Voltage: 20Vp-pSpacing of Hole Centres:

54 x 130mm, 5.5mm dia.Dimensions: 65 x 145mm, 40mm deep

ORDER CODE: GB784

SPEAKERSIN ENCLOSURES

ULTRASONIC LOUDSPEAKERMODULE

This ultrasonic loudspeaker module can beused together with any ultrasonic signal gen-erator like (GB779) and (GB806). It containsa LED that only lights up when the loud-speaker is fed with ultrasonic sounds. It canbe mounted outside provided that it is pro-tected from direct rain (e.g. below a roof). Ithas 2 mounting flanges for wall fastening.Dimensions: 72 x 50 x 28mm

ORDER CODE: GB773

PROFESSIONAL SPEAKERCABINET 2-WAY 200WRMS

Features:robust, suited for all PA applicationsvery cost-effectivemetal protection grille and metal cornerguardprofessional 4-pins speaker connector or6.35mm jackincorporated plastic handles and metal sup-port for loudspeaker stand (Ø 35mm)Specifications:Woofer Size: 254mm (10 inch)Tweeter Size: 102 x 254mm (4 x 10 inch)Power: 200Wrms, 400W max.Impedance: 8 OhmSensitivity: 90dB

07.73

Frequency Response: 30Hz – 20kHzMagnet Weights:

Woofer: 850gTweeter: 283g

Dimensions: 570 x 405 x 360mmWeight: 16kg

ORDER CODE: GB359

SPEAKER ACCESSORIES

2- WAY CROSS-OVER120 WATT 8 OHM MODULE

This 2-way cross-over network can be usedinside speaker cabinets to connect 4 - 8 ohmloudspeakers. For 1 bass speaker and 1midrange.Specifications:Output Power: max. 120 WSeparating Frequency: approx. 3kHz/12dBLoudspeaker Impedance: 4 - 8 OhmDimensions: 59 x 45 x 20mm

(without mounting flanges)ORDER CODE: GB786

3- WAY CROSS-OVER120 WATT 8 OHM MODULE

For one bass speaker, mid speaker and oneor two tweeters 4 - 8 Ohm. Separating fre-quency approximately 800 / 5000Hz. Therate of change of attenuation is 12dB/octave.Size: 67x65x37mm

ORDER CODE: PB271

H-BRIDGE STANDWITH 2 EXTRA T-BARS

This bridge stand consists of two singlestands that are connected together with ahorisontal beam. Each stand has a T-bar thatcan be adjusted in hight. A special, hammerfinish, coating offers better protection againstscratches and damage.Specifications:Maximum Load Mass: 60kg per single standAdjustable Height: 2.4 - 4mWidth: 3mColour: grey with black speckles

Weight: 14.5kgORDER CODE: AC996

MOTORS

DC PERMANENT MAGNETMOTORS

MINI MOTOR 0.5 TO 3VDC

It can be used with 2V solar cell (FB118)Dimensions:

27mm length (excluding the shaft)16mm width x 12mm heightShaft: 1.4mm diameter x 9.5mm length

ORDER CODE: GB571

MOTOR 1.5 TO 3VDC 10 000RPM

3 pole, permanent magnet DC motorSpecifications:Supply Voltage Range: 1.5 - 3Vdc

Nominal Voltage: 3VdcStall Torque: 7.7mN.mSpecifications with No Load:

Rotational Speed: 12 511rpmSupply Current: 290mA max.

Specifications at Maximum Efficiency:Rotational Speed: 10 012rpmSupply Current: 1.16ATorque: 1.54mN.mOutput Power: 1.61WEfficiency: 42.36%

Motor Dimensions:Body Diameter: 24mmLength: 27mm (excluding shaft length)Shaft: 2mm diameter x 6.5mm length

ORDER CODE: AB214

MOTOR 2.4 TO 6VDC 11 400RPM

3 pole, permanent magnet DC motorSpecifications:Supply Voltage Range: 2.4 - 6Vdc

Nominal Voltage: 6VdcStall Torque: 27mN.mSpecifications with No Load:


Specifications at Maximum Efficiency:Rotational Speed: 11 404rpmSupply Current: 1.434ATorque: 4.444mN.mOutput Power: 5.312WEfficiency: 61.74%

Motor Dimensions:Body Diameter: 24mmLength: 31mm (excluding shaft length)

Shaft: 2mm diameter x 10mm lengthORDER CODE: AA902

MOTOR 6 TO 24VDC 8 700RPM

A 3 pole, permanent magnet DC motorSpecifications:Supply Voltage Range: 6 - 24Vdc



Specifications at Maximum Efficiency:Rotational Speed: 8 768rpmSupply Current: 726mATorque: 6mN.mOutput Power: 5.617WEfficiency: 59.58%

Motor Dimensions:Body Diameter: 27.7mmLength: 32.6mm (excluding shaft length)Shaft: 2.3mm diameter x 12mm length

ORDER CODE: AB215

HIGH POWER DC MOTORS

Note: Powerful DC MotorsDimensions:Body:37.5mm dia. x 57mm length

(excluding shaft length)Shaft:3.175mm dia. x 10mm lengthWeight: 224g

7.2VDC MOTOR SP3657-30A 3 pole, permanent magnet DC motorSpecifications:Supply Voltage Range: 3 - 12Vdc

Nominal Voltage: 7.2VdcStall Torque: 240mN.mSpecifications with No Load:

Rotational Speed: 10 500rpmSupply Current: 1.1A max.

Specifications at Maximum Efficiency:Rotational Speed: 8 800rpmSupply Current: 8ATorque: 40mN.mOutput Power: 35WEfficiency: 65%

ORDER CODE: AB231

12VDC MOTOR SP3657-50A 5 pole, permanent magnet DC motorSpecifications:Supply Voltage Range: 6 - 24Vdc


Rotational Speed: 5 700rpmSupply Current: 0.25A max.

07.74

Specifications at Maximum Efficiency:Rotational Speed: 4 800rpmSupply Current: 1.6ATorque: 26mN.mOutput Power: 13WEfficiency: 68%

ORDER CODE: AB232

DC GEARED MOTORS

GEARBOXWITH 2 GEAR SETS

Features:Use this gearbox set to build your ownmotorised gadgets. Use one of the 2 gearsets for one of two rotational speeds. Pleasenote that there are not any wheels suppliedin this kit.Specifications:Motor: (is supplied)

Specifications:Supply Voltage: 3VdcRotational Speed: (no load, not geared)

12 000 rpm at 3Vdc / 250mAMotor Dimensions:

Body Diameter: 21mmLength: 25mm (excluding shaft length)Shaft: 2mm diameter x 8mm long

Gearbox Housing:Dimensions: 45 x 65mm, 22mm height

2 Metal Shafts:Dimensions: 2 x 40mm and 3 x 52mm

2 Gear Sets: (5 gears in each set)(C: number of cogs, R: mesh radius mm):

Set 1: for approximately 42rpm at 3VdcGear Ratio: 288:1 (for higher torque)The following gears are fixed to shaftsPinion Gear: C8 / R2, whiteSpur Gear: C40 / R10, whiteThe following gears turn freely on shaftsFace Gear: C36 / R9.4 - C10 / R2.5, whiteSpur Gear: C40 / R10 - C10 / R2.5, redSpur Gear: C40 / R10 - C10 / R2.5, green

Set 2: for approximately 200rpm at 3VdcGear Ratio: 60:1 (for higher speed)The following gears are fixed to shaftsPinion Gear: C10 / R2.5, whiteSpur Gear: C36 / R9, whiteThe following gears turn freely on shaftsFace Gear: C36 / R9.4 - C14 / R3.5, whiteSpur Gear: C36 / R9 - C14 / R3.5, redSpur Gear: C36 / R9 - C14 / R3.5, green

ORDER CODE: GC144

GEARBOX MOTOR G19/N2738-132

DC permanent magnet motor with gearbox.Specifications:Supply Voltage Range: 6 - 15Vdc

Nominal Voltage: 12VdcRFI SuppressionGear Ratio: 171:1Peak Momentary Torque: 300mN.mNo Load Rotational Speed: 32 rpmSpecifications at Maximum Efficiency:

Rotational Speed: 25 rpmSupply Current: 370mA max.Torque: 200mN.m (do not exceed this)

Dimensions:Height: 29mmLength: 55mm (excluding shaft length)Width: 58mmShaft: 3mm diameter x 10mm longWeight: 110g

ORDER CODE: AB233

GEARBOX MOTOR 20GN152025

DC permanent magnet motor with gearbox.Specifications:Supply Voltage Range: 4 - 12Vdc

Nominal Voltage: 12VdcRFI Suppression using a capacitorGear Ratio: 50:1Peak Momentary Torque: 90mN.mNo Load Rotational Speed: 200 rpmSpecifications at Maximum Efficiency:

Rotational Speed: 175 rpmSupply Current: 130mA max.Torque: 30mN.m

Dimensions:Height: 20mm diameter of round gearboxLength: 45.6mm (excl. drive shaft length)Width: 20.4mmDrive Shaft: 3mm diameter x 7.5mm longWeight: 30g

ORDER CODE: AB234

GEARBOX MOTORS 33G/N2738

Note: Permanent magnet DCmotor & gearbox. Dimensions:Gearbox Length L: depends onorder codeGearbox Diameter: 33mmMotor Lenght: 41mm (excludingshaft length)Motor Diameter: 27.7mmShaft: 5mm diameter x 9.5mmlongWeight: 140g

12 RPM GEARBOX MOTORSpecifications:Supply Voltage Range: 6 - 15Vdc

Nominal Voltage: 12VdcRFI SuppressionGear Ratio: 312:1Peak Momentary Torque: 900mN.mNo Load Rotational Speed: 12rpmSpecifications at Maximum Efficiency:

Rotational Speed: 11rpm min.Supply Current: 120mA max.Torque: 300mN.m

Gearbox Length L: 24.5mmORDER CODE: AB228

4.8 RPM GEARBOX MOTORSpecifications:Supply Voltage Range: 6 - 15Vdc

Nominal Voltage: 12VdcRFI SuppressionGear Ratio: 781:1Peak Momentary Torque: 900mN.mNo Load Rotational Speed: 4.8rpmSpecifications at Maximum Efficiency:

Rotational Speed: 4.2rpmSupply Current: 100mA max.Torque: 300mN.m

Gearbox Length L: 29mmORDER CODE: AB229

1.9 RPM GEARBOX MOTORSpecifications:Supply Voltage Range: 6 - 15Vdc

Nominal Voltage: 12VdcRFI SuppressionGear Ratio: 1953:1Peak Momentary Torque: 900mN.mNo Load Rotational Speed: 1.9rpmSpecifications at Maximum Efficiency:

Rotational Speed: 1.6rpm min.Supply Current: 80mA max.Torque: 300mN.m

Gearbox Length L: 29mmORDER CODE: AB230

07.75

STEPPER MOTORS

BIPOLAR STEPPERMOTORSAIA UKD34NO4RNZ3

Very strong stepper motorApproximately 48 steps / rotation. 4 connections (2 stators with 2 wires each)Approximately 10 Ohm per windingOperating Voltage: 5V / 500mA per windingDimensions without axis: 57 x 26mmAxis diameter = 4mm x lengh = 5mmMounting hole pitch = 67mm.

ORDER CODE: GB500

MINI UNIPOLAR STEPPER MOTORAEG S21/24A

Approximately 24 steps / revolution, 6 connections (2 stators with 3 wires each),Approximately 56 Ohm per windingOperating Voltage: 6 - 12V per windingOperating Current: 220mA per windingBody Dimensions: 35 dia. x 25mm height2 driving axles on opposite sides of body:

Each 2mm dia. x 8mm long and alsoOne gearwheel 15mm dia. with 28 cogs.

ORDER CODE: GB499

UNIPOLAR STEPPER MOTOR WITHGEARBOX, 12V, 43mA

Steps per Revolution: approximately 40965 connections (2 stators with 2 wires each

and common ground)4 phaseOhms per Winding: 280 OhmOperating Voltage 12VOperating Current: 43mA per windingGearbox Speed Reduction Ratio: 1:64Angle of Rotation for each Step of the Shaft:

0.0879º = 5.625º / 64Dimensions:

height without axis: 19mm

round part diameter: 28mmmounting hole pitch: 35mmShaft: 5mm diameter x 8.5mm, no cogs.

Holding Torque: 310 g.cm, that is30.411mN.m measured at 100 steps / sec.

Pull-in Torque: 380 g.cm, that is37.278mN.m measured at 100 steps / sec.

Stepping Rate: max. 700 steps per secondORDER CODE: AB216

UNIPOLAR STEPPER MOTOR WITHGEARBOX, 12V, 60mA

Steps per Revolution: approximately 40806 connections (2 stators with 3 wires each)4 phaseOhms per Winding: 200 OhmOperating Voltage 12VOperating Current: 60mA per windingGearbox Speed Reduction Ratio: 1:85Angle of Rotation for each Step of the Shaft:

0.0882º = 7.5º / 85Dimensions:

height without axis: 17mmround part diameter: 35mmmounting hole pitch: 42mmShaft: 5mm diameter x 8.5mm, no cogs.

Holding Torque: 750 g.cm, that is73.575mN.m measured at 100 steps / sec.

Pull-in Torque: 650 g.cm, that is63.765mN.m measured at 100 steps / sec.

Stepping Rate: max. 500 steps per secondORDER CODE: AB217

MINI SERVO MOTORS

SERVO MOTOR 9gSpecifications:Supply Voltage: 4.2 - 6VdcRotational Speed: 60° in 0.12 seconds,

that is 500° per secondTorque: 1.20kg.cm,

that is 117.72mN.mDimensions: 24 x 12 x 23mmWeight: 9g

ORDER CODE: AC600

SERVO MOTOR 16gSpecifications:Supply Voltage: 6VdcRotational Speed: 60° in 0.16 seconds,

that is 375° per secondTorque: 1.50kg.cm,

that is 147.15mN.mDimensions: 28 x 13 x 28.5mmWeight: 16g

ORDER CODE: AC599

TRANSFORMERS

CHASSIS MOUNTTRANSFORMERS

Note: All voltages indicated areAC voltages.

QB070 230V to 3-0-3V 1A 6VAQB071 230V to 4-0-4V 1A 8VAQB072 230 to 6-0-6V 1A 12VAAA733 230V to 6-0-6V 2A 24VAAB786 230V to 7.5-0-7.5V 0.3A 4.5VAQB073 230V to 8-0-8V 1A 16VAAA579 230V to 8-0-8V 1.5A 24VAAA749 230V to 9-0-9V 250mA 4.5VAAC660 230V to 9-0-9V 0.5A 9VAAB888 230V to 9-0-9V 0.6A 11VAAA750 230V to 9-0-9V 4A 72VASB041 230V to 10-0-10V 10A 200VAEB217 230V to 11.5V 7.6A 87VAAC658 230V to 12V 1A 12VAAC659 230V to 12V 2A 24VAAC895 230V to 12V 3.5A 42VAEB216 230V to 12V 4A 50VAAA751 230V to 12-0-12V 50mA 1.2VAQB074 230V to 12-0-12V 0.5A 12VAEB925 230V to 12-0-12V 1A 24VAAA753 230V to 12-0-12V 1.5A 36VAAC661 230V to 12-0-12V 2A 48VAPB196 230V to 12-0-12V 3A 72VAAA752 230V to 12-0-12V 8A 192VAAA731 230V to 15-0-15V 1A 30VAAA409 230V to 16-0-16V 0.62A 20VAAA410 230V to 18-0-18V 0.44A 16VAAA732 230V to 20-0-20V 1A 40VAAA647 230V to 21-0-21V 1.6A 67VAAB370 230V to 24-0-24V 1A 48VARB012 230V to 28-0-28V 4A 224VA

PCB MOUNTTRANSFORMERS

AA481 230V to 2x3V 0.5A 3VAEB931 230V to 2x6V 0.25A 3VAAB371 230V to 2x6V 1A 12VAEB910 230V to 2x7.2V 100mA 1.5VAEB908 230V to 7.2V 200mA 1.5VAEB909 230V to 9.5V 150mA 1.5VAFB017 230V to 9V 166mA 1.5VAEB911 230V to 12V 170mA 2VAEB912 230V to 2x12V 2VA

07.76

PLUG IN TRANSFORMERS

PB162 230V to 9V 1A 9VAPB163 230V to 12V 0.5A 6VAPB161 230V to 12V 1A 12VA FusedPB032 230V to 16V 1A 16VA Fused

230VAC TO 110VAC 45WTRANSFORMER

WITH USA POWER SOCKET

This is a 45W step down auto-transformerInput Voltage: 200 - 240VacOutput Voltage: 100 - 120VacPower Rating: 45VA maximumDimension:

Length: 88mmWidth: 67mmHeight: 51mm

ORDER CODE: AA966



This is a 100W step down auto-transformerInput Voltage: 200 - 240VacOutput Voltage: 100 - 120VacPower Rating: 100VA maximumDimension:


Cable Length: 1.8mWeight: 1.1kg

ORDER CODE: AA967



This is a 300W step down auto-transformerInput Voltage: 200 - 240VacOutput Voltage: 100 - 120VacPower Rating: 300VA maximumFuse Protection: 1.5A in fuse holderDimension:


Cable Length: 1.8mWeight: 3.2kg

ORDER CODE: AA968

TOROIDALTRANSFORMERS

Note: These are open styletoroidal transformers that may becentre-tapped, or have two sepa-rate, secondary windings. Amounting kit is supplied.

AB295 230V to 9-0-9V 2x8.89A 160VAAB374 230V to 15-0-15V 2x5.33A 160VAGB995 230V to 18-0-18V 2x4.44A 160VAAA275 230V to 25-0-25V 2x6.25A 300VAAC884 230V to 30-0-30V 2x2A 120VAAA259 230V to 30-0-30V 2x5A 300VA

VARIABLETRANSFORMERS

ADJUSTABLE AUTO-TRANSFORMER

This is an enclosed auto-transformer withadjustable AC output voltage. It is suitablefor use in work shops, laboratories etc. It hasa built-in analogue panel meter that displaysthe output voltage.Specifications:Input Voltage:

Single phase AC voltage 50 / 60Hzinputs for 110Vac and 230Vac

Output Voltage Range:Single phase, adjustable from 0 to 240Vacinput and output frequencies are the same

Transformer Power Rating: 1kVADimensions: 240 x 170 x 175mmWeight: 7.2kg

ORDER CODE: AB390

SPECIAL APPLICATIONTRANSFORMERS

TELEPHONE TRANSFORMER600 OHM / 600 OHM

This is a PCB mount, telephone line isolatingtransformer. The primary and secondarywindings have the same impedance.Specifications:Turns Ratio: 1:1Impedance Ratio:

primary Zp: 600 Ohm ± 5%secondary Zs: 600 Ohm ± 5%

DC resistance:primary Rp: 60 Ohm ± 5%secondary Rs: 60 Ohm ± 5%

Impedance Variation: ± 3%(at 1kHz, 1V amplitude, zero DC-current)

Frequency Response (± 3dB):300Hz - 4kHz for 0dB at 1kHz

Centre top Unbalance: 3% max.(at 1kHz, 1V amplitude, zero DC-current)

Primary-to-Secondary Winding Insulation:100M Ohm min. / 100Vdc

Breakdown Voltage: 100V for 1 minuteInsertion Loss: 2.5dB max.

(at 1kHz, 1V amplitude, zero DC-current)ORDER CODE: AC811

TRIGGER TRANSFORMERSFOR XENON STROBO TUBES

07.77

0.6mJ TRIGGER COILIn this transformer the primary and second-ary windings have a common connection.Output voltage : 4kVPrimary voltage : 130VTrigger capacitor : 0.1µFEnergy : 0.6mJ

ORDER CODE: GB325

0.6mJ TRIGGER COILIn this transformer the primary and second-ary windings have a common connection.Output voltage : 4kVPrimary Voltage : 170VTrigger capacitor : 0.1µFEnergy : 0.6mJ

ORDER CODE: JB136

2mJ TRIGGER COILIn this transformer the primary and second-ary windings do not have a common connec-tion. Output voltage : 4kVPrimary Voltage : 300VTrigger capacitor : 0.1µFEnergy : 2mJ

ORDER CODE: FB104

PCB MOUNTSTEP-UP TRANSFORMER

6V TO 360V, 13X16X15MMThis is a low power step-up transformer. Ithas a primary to secondary turns ratio of 1 :60. It can be used in battery driven xenontube flasher units.

ORDER CODE: GB324

TRANSFORMER ANDFERRITE CORES

FERRITE TOROIDAL CORES

Note: Dimensions are indicated:Outer dia. x Inner hole dia. xheight

AA567 Toroidal Core 14.6x8.3x5.6mm(3C85material)

AA568 Toroidal Core 26x13.8x10.7mm(3C11material)

AA569 Toroidal Core 32.4x18.3x13mm(3F3material)

AC880 Flat Ferrite Antenna Rod13 x 5 x 55mm

AC881 Ferrite Antenna10mm dia. x 60mm

AC882 Ferrite Antenna8 x 5 x 80mm

07.78

AA... P1AB... P2AC... P3AD... P5BB... P5DB... P5EB... P6FB... P7GB... P8GC... P9HB... P9JB... P9KB... P10MB... P10NB... P10PB... P10QB... P10RB... P10SB... P10TB... P10VB... P10XB... P10

Code Price List1AA001 R 3.81AA002 R 4.49AA003 R 5.40AA004 R 5.76AA005 R 6.48AA006 R 1.14AA007 R 0.86AA012 R 9.42AA013 R 3.17AA014 R 3.67AA015 R 3.35AA016 R 4.33AA019 R 317.84AA022 R 93.80AA025 R 120.99AA027 R 9.72AA028 R 8.68AA029 R 26.68AA030 R 26.68AA031 R 317.84AA032 R 47.57AA034 R 12.63AA035 R 18.54AA036 R 21.10AA037 R 20.66AA038 R 25.24AA040 R 14.26AA041 R 18.00AA042 R 23.03AA043 R 78.84AA044 R 14.83AA045 R 1.66AA047 R 7.65AA048 R 13.52AA050 R 3.17AA052 R 0.96AA053 R 1.50AA054 R 4.67AA055 R 3.53AA063 R 4.47AA065 R 13.67AA066 R 4.70AA067 R 4.94AA068 R 5.35AA070 R 5.10AA071 R 13.73AA073 R 0.14AA074 R 0.16AA075 R 0.27AA076 R 0.14AA077 R 0.18AA078 R 0.14AA079 R 0.14AA080 R 0.14

AA081 R 0.27AA082 R 0.14AA083 R 0.14AA084 R 0.16AA085 R 0.14AA086 R 0.14AA087 R 0.14AA088 R 0.14AA089 R 0.14AA090 R 0.14AA091 R 0.25AA092 R 0.14AA093 R 0.14AA094 R 0.14AA095 R 0.14AA096 R 0.14AA097 R 0.14AA098 R 0.14AA099 R 0.14AA100 R 0.14AA101 R 0.27AA102 R 0.14AA103 R 0.23AA104 R 0.14AA105 R 0.14AA106 R 0.46AA107 R 0.25AA108 R 0.14AA109 R 0.27AA110 R 0.14AA111 R 0.14AA112 R 0.14AA113 R 0.14AA114 R 0.14AA115 R 0.23AA116 R 0.14AA117 R 0.14AA118 R 0.16AA119 R 0.14AA120 R 0.25AA121 R 0.14AA122 R 0.25AA123 R 0.21AA124 R 0.18AA125 R 0.14AA126 R 0.14AA127 R 0.14AA128 R 0.14AA129 R 0.16AA130 R 0.14AA131 R 0.14AA132 R 0.14AA133 R 0.14AA134 R 0.16AA135 R 0.14AA136 R 0.14AA137 R 0.16AA138 R 0.14AA139 R 0.14AA140 R 0.14AA141 R 0.14AA142 R 0.14AA143 R 0.14AA144 R 0.14AA145 R 0.16AA146 R 0.14AA147 R 0.18AA148 R 0.16AA149 R 0.18AA150 R 0.16AA151 R 0.14AA152 R 0.16AA153 R 0.14AA154 R 0.14AA155 R 0.14AA156 R 0.21AA157 R 0.18AA158 R 0.27AA159 R 0.89AA160 R 0.89AA161 R 2.29AA162 R 0.75AA163 R 1.49AA164 R 2.05AA165 R 1.09AA166 R 1.90AA167 R 2.33AA168 R 1.96

AA169 R 2.70AA170 R 2.91AA171 R 2.98AA172 R 2.91AA173 R 3.89AA174 R 4.16AA175 R 50.57AA176 R 10.60AA177 R 0.18AA178 R 583.68AA184 R 0.86AA185 R 0.68AA186 R 4.86AA187 R 4.51AA188 R 570.91AA189 R 1,771.56AA190 R 1,072.51AA194 R 0.92AA195 R 0.88AA196 R 0.40AA197 R 0.35AA198 R 0.14AA199 R 0.57AA200 R 14.11AA202 R 61.56AA205 R 99.33AA206 R 188.77AA209 R 203.16AA210 R 183.32AA215 R 72.20AA218 R 50.57AA224 R 123.83AA225 R 138.45AA226 R 130.76AA232 R 50.57AA233 R 50.57AA234 R 143.95AA235 R 50.57AA236 R 88.95AA237 R 252.45AA238 R 81.69AA241 R 97.26AA244 R 105.04AA246 R 349.28AA248 R 190.63AA249 R 143.95AA251 R 14.93AA252 R 6.89AA253 R 4.29AA254 R 3.42AA255 R 28.73AA256 R 112.86AA257 R 194.94AA258 R 92.34AA259 R 328.13AA265 R 14.14AA266 R 4.10AA268 R 17.03AA274 R 43.00AA275 R 447.55AA276 R 2.12AA277 R 4.80AA278 R 0.73AA279 R 0.73AA280 R 9.01AA282 R 41.97AA285 R 0.27AA286 R 61.56AA287 R 161.18AA288 R 66.69AA289 R 87.21AA290 R 51.30AA291 R 71.82AA292 R 65.66AA293 R 191.52AA294 R 99.35AA303 R 30.40AA304 R 112.39AA305 R 1.88AA306 R 3.29AA307 R 3.48AA308 R 12.63AA309 R 11.06AA310 R 15.85AA311 R 152.43AA312 R 127.12AA313 R 112.86AA314 R 55.87





1

Price List_1 in South African Rand Vat incElectronics123: TEL: 012 3322356 fax:012 3320487

AA800 R 1.37AA801 R 0.41AA802 R 1.44AA803 R 1.03AA804 R 0.51AA805 R 1.03AA806 R 0.68AA807 R 1.71AA808 R 1.20AA809 R 2.71AA810 R 0.68AA814 R 0.41AA815 R 0.46AA819 R 1.88AA821 R 2.12AA822 R 3.88AA823 R 4.79AA825 R 2.15AA826 R 3.42AA827 R 0.68AA828 R 1.64AA829 R 2.96AA830 R 4.38AA831 R 2.94AA832 R 3.69AA833 R 5.70AA834 R 3.42AA835 R 1.68AA836 R 2.77AA837 R 2.77AA840 R 15.96AA842 R 8.62AA843 R 39.51AA844 R 3.99AA845 R 3.42AA846 R 1.03AA847 R 0.79AA848 R 0.68AA849 R 5.70AA850 R 5.02AA851 R 18.24AA852 R 3.44AA853 R 13.68AA854 R 12.54AA855 R 5.02AA856 R 6.84AA857 R 17.46AA859 R 0.46AA860 R 0.89AA861 R 4.56AA862 R 4.56AA863 R 1.33AA864 R 5.47AA865 R 1.30AA866 R 1.44AA868 R 0.68AA869 R 0.96AA870 R 0.86AA871 R 2.69AA872 R 1.68AA873 R 1.03AA874 R 1.64AA876 R 2.98AA877 R 1,714.56AA879 R 7.23AA884 R 177.75AA887 R 62.95AA891 R 5.02AA893 R 9.05AA894 R 2.63AA895 R 51.30AA896 R 19.72AA899 R 0.86AA902 R 18.43AA903 R 5.02AA908 R 47.20AA909 R 0.00AA911 R 159.52AA913 R 92.34AA914 R 24.21AA915 R 20.52AA916 R 22.80AA917 R 22.57AA918 R 26.68AA919 R 55.40AA920 R 82.08AA925 R 8.64AA926 R 4.33AA927 R 0.00AA932 R 69.77AA933 R 8.89

AA938 R 2.26AA939 R 0.68AA940 R 0.82AA941 R 0.46AA942 R 2.10AA943 R 1.16AA945 R 1.16AA946 R 0.68AA947 R 1.16AA948 R 0.62AA949 R 1.16AA950 R 1.16AA951 R 1.54AA952 R 1.16AA953 R 0.68AA954 R 0.75AA955 R 0.75AA956 R 5.45AA957 R 0.14AA958 R 0.27AA960 R 37.55AA961 R 22.80AA962 R 3.39AA966 R 52.04AA967 R 116.83AA968 R 202.51AA969 R 0.59AA970 R 4.53AA971 R 2.69AA975 R 136.46AA976 R 59.23AA977 R 15.05AA978 R 13.22AA979 R 10.28AA980 R 15.05AA982 R 505.25AA983 R 86.73AA984 R 29.75AA985 R 79.74AA986 R 63.09AA987 R 51.30AA989 R 83.33AA990 R 6.09AA994 R 142.86AA996 R 14.93AA997 R 30.80AA998 R 22.73

AB001 R 98.50AB002 R 8.54AB004 R 269.20AB005 R 732.06AB006 R 63.57AB007 R 5.79AB008 R 6.08AB010 R 26.49AB011 R 23.64AB012 R 95.06AB014 R 62.71AB015 R 194.30AB016 R 72.24AB017 R 423.21AB018 R 3.98AB019 R 178.48AB020 R 11.56AB021 R 11.82AB022 R 251.69AB023 R 359.66AB024 R 180.22AB025 R 212.68AB026 R 366.13AB027 R 177.68AB029 R 247.82AB031 R 0.81AB033 R 170.42AB034 R 298.24AB036 R 0.84AB037 R 3.72AB038 R 4.70AB039 R 1.20AB040 R 1.20AB041 R 1.20AB042 R 1.20AB043 R 1.20AB044 R 0.96AB045 R 0.96AB046 R 0.96AB047 R 0.96AB048 R 0.96AB049 R 0.96AB050 R 0.96

AB051 R 0.96AB052 R 0.96AB053 R 0.97AB054 R 0.96AB055 R 0.96AB056 R 0.96AB057 R 0.96AB058 R 1.11AB059 R 0.96AB060 R 2.30AB061 R 0.96AB062 R 990.40AB063 R 113.49AB064 R 10.72AB065 R 77.98AB066 R 21.66AB067 R 20.29AB068 R 20.29AB069 R 20.29AB070 R 31.04AB071 R 165.31AB074 R 7.91AB076 R 5.67AB077 R 27.50AB080 R 105.10AB084 R 79.37AB086 R 1.73AB087 R 20.94AB088 R 72.06AB090 R 214.58AB091 R 214.58AB092 R 292.59AB093 R 266.22AB094 R 85.59AB095 R 50.57AB096 R 50.57AB097 R 167.30AB098 R 50.57AB099 R 143.95AB100 R 93.37AB102 R 105.04AB103 R 100.80AB104 R 428.82AB106 R 155.62AB107 R 85.59AB108 R 190.63AB110 R 66.13AB111 R 116.71AB112 R 525.31AB113 R 77.81AB114 R 136.16AB115 R 722.78AB117 R 186.74AB118 R 51.21AB120 R 42.80AB121 R 335.45AB124 R 50.57AB125 R 50.57AB126 R 136.16AB127 R 335.45AB128 R 105.04AB129 R 147.84AB130 R 128.39AB131 R 66.13AB132 R 178.96AB133 R 286.77AB134 R 133.82AB136 R 387.33AB137 R 273.20AB138 R 105.04AB139 R 335.45AB140 R 50.57AB142 R 1,037.35AB143 R 361.15AB144 R 303.34AB145 R 55.68AB146 R 104.63AB147 R 570.76AB148 R 342.27AB149 R 44.12AB151 R 3.12AB152 R 37.02AB153 R 34.28AB154 R 33.27AB155 R 114.58AB156 R 82.83AB157 R 101.20AB158 R 72.06AB159 R 2.79AB160 R 2.01AB161 R 11.49

AB162 R 55.38AB163 R 20.29AB164 R 3.08AB165 R 17.08AB167 R 11.40AB169 R 19.38AB170 R 52.33AB171 R 43.09AB172 R 111.83AB173 R 253.34AB174 R 2.77AB176 R 19.39AB177 R 2.91AB178 R 72.06AB180 R 62.91AB183 R 132.17AB187 R 289.38AB188 R 348.11AB189 R 1,269.38AB192 R 1,520.91AB193 R 1,953.38AB194 R 1.01AB195 R 1.01AB196 R 284.54AB197 R 391.25AB198 R 8.88AB199 R 8.88AB200 R 36.41AB201 R 22.79AB202 R 76.56AB203 R 437.02AB204 R 413.35AB205 R 890.01AB206 R 178.07AB207 R 61.22AB208 R 262.33AB209 R 536.43AB210 R 690.36AB211 R 78.39AB212 R 72.33AB213 R 206.70AB214 R 6.51AB215 R 21.95AB216 R 88.67AB217 R 109.98AB218 R 0.55AB219 R 0.67AB220 R 0.67AB222 R 680.51AB224 R 14.52AB225 R 53.10AB226 R 160.06AB227 R 52.36AB228 R 297.00AB229 R 300.41AB230 R 300.41AB231 R 200.28AB232 R 200.28AB233 R 300.41AB234 R 300.41AB235 R 72.06AB239 R 14.64AB242 R 233.47AB243 R 414.96AB244 R 467.34AB248 R 72.06AB249 R 67.92AB251 R 494.67AB252 R 494.67AB254 R 2,683.98AB255 R 2,683.98AB256 R 49.25AB257 R 7.05AB258 R 4.34AB259 R 922.48AB260 R 9.61AB261 R 13.20AB264 R 3.98AB265 R 72.06AB266 R 51.22AB267 R 56.94AB281 R 0.09AB283 R 814.05AB284 R 814.05AB285 R 128.22AB286 R 13.98AB287 R 4.66AB288 R 2.34AB289 R 3.47AB290 R 1,461.22AB292 R 107.13

AB293 R 4.75AB294 R 5.80AB295 R 218.66AB296 R 170.85AB297 R 227.93AB298 R 120.46AB299 R 102.81AB300 R 1,201.08AB303 R 138.46AB304 R 424.73AB305 R 272.76AB306 R 186.31AB307 R 156.28AB308 R 313.14AB309 R 260.95AB310 R 255.42AB311 R 48.18AB312 R 53.47AB313 R 440.51AB314 R 390.20AB315 R 4,103.89AB316 R 376.10AB317 R 455.87AB318 R 166.68AB319 R 417.51AB320 R 81.83AB321 R 148.72AB322 R 114.43AB323 R 163.66AB324 R 113.68AB325 R 113.68AB326 R 113.68AB327 R 64.44AB328 R 100.50AB329 R 107.95AB330 R 57.46AB331 R 201.35AB332 R 4.24AB333 R 4.82AB334 R 6.58AB335 R 7.28AB336 R 1,694.13AB337 R 334.05AB338 R 10.48AB339 R 143.95AB340 R 81.69AB341 R 48.07AB342 R 53.39AB343 R 77.39AB344 R 8.27AB345 R 2.29AB346 R 3.17AB347 R 4.00AB348 R 7.60AB349 R 16.68AB350 R 12.36AB351 R 8.88AB352 R 192.11AB353 R 93.15AB354 R 1,477.05AB355 R 117.42AB356 R 155.31AB357 R 448.82AB358 R 275.10AB359 R 2,580.73AB360 R 2,580.73AB361 R 52.18AB362 R 172.09AB363 R 173.54AB364 R 2,023.14AB365 R 2,782.23AB366 R 23.15AB369 R 236.31AB370 R 192.02AB371 R 89.17AB372 R 3.73AB373 R 2.57AB374 R 224.41AB375 R 265.46AB376 R 20.58AB377 R 61.56AB379 R 234.67AB380 R 25.65AB382 R 10.17AB383 R 52.60AB384 R 32.48AB385 R 29.74AB386 R 57.46AB387 R 102.94AB388 R 7.10AB389 R 5.76

AB390 R 1,002.47AB391 R 72.06AB393 R 4.58AB394 R 1.47AB395 R 3.00AB396 R 19.02AB397 R 56.73AB398 R 136.66AB399 R 17.53AB400 R 22.15AB401 R 10.25AB402 R 4.62AB403 R 8.19AB404 R 44.76AB405 R 49.50AB406 R 414.80AB407 R 82.15AB408 R 287.33AB409 R 6.62AB410 R 15.34AB411 R 31.36AB412 R 2.31AB413 R 12.95AB414 R 26.00AB415 R 4.34AB416 R 69.62AB417 R 27.93AB418 R 40.05AB419 R 15.20AB420 R 36.57AB421 R 49.42AB422 R 3.10AB423 R 9.33AB424 R 11.06AB425 R 0.99AB426 R 1.22AB427 R 3.73AB428 R 5.31AB430 R 8.97AB431 R 4.06AB432 R 6.27AB435 R 2.75AB436 R 2.78AB437 R 2.59AB438 R 2.60AB439 R 1.62AB440 R 7.09AB441 R 6.24AB442 R 3.51AB443 R 6.97AB444 R 17.51AB445 R 20.16AB446 R 20.66AB447 R 25.65AB448 R 1.85AB449 R 2.33AB450 R 2.33AB451 R 3.32AB452 R 2.53AB453 R 2.99AB454 R 10.81AB455 R 10.81AB456 R 10.64AB457 R 10.00AB458 R 9.45AB459 R 10.00AB460 R 3.52AB461 R 4.07AB462 R 13.35AB463 R 2.43AB464 R 3.43AB465 R 4.83AB466 R 7.36AB467 R 8.40AB468 R 8.61AB469 R 15.68AB470 R 0.46AB471 R 48.93AB472 R 3.09AB473 R 3.27AB474 R 2.28AB475 R 2.28AB476 R 3.27AB477 R 2.83AB478 R 3.27AB479 R 3.27AB480 R 3.27AB481 R 3.17AB482 R 0.97AB483 R 7.24AB484 R 19.45

AB485 R 2.37AB486 R 2.63AB487 R 2.37AB488 R 2.37AB489 R 2.37AB490 R 2.47AB491 R 1.90AB492 R 3.33AB493 R 2.39AB494 R 3.33AB495 R 2.67AB496 R 4.55AB497 R 5.72AB498 R 7.44AB499 R 4.47AB500 R 6.38AB501 R 5.99AB502 R 91.63AB503 R 4.57AB504 R 6.01AB505 R 7.60AB506 R 12.14AB507 R 33.46AB508 R 5.00AB509 R 14.54AB510 R 81.11AB511 R 1.14AB512 R 1.14AB514 R 40.16AB515 R 38.13AB516 R 41.31AB517 R 43.49AB518 R 44.30AB519 R 8.11AB520 R 29.49AB521 R 4.97AB522 R 5.43AB523 R 6.00AB524 R 6.85AB525 R 6.42AB526 R 10.33AB527 R 10.78AB528 R 11.45AB529 R 14.43AB530 R 21.43AB531 R 1.50AB532 R 1.77AB533 R 22.50AB534 R 21.42AB535 R 2.42AB536 R 2.64AB537 R 3.31AB538 R 49.36AB539 R 2.21AB540 R 3.61AB541 R 4.45AB542 R 6.92AB543 R 10.59AB544 R 2.18AB545 R 3.28AB546 R 3.37AB547 R 5.45AB548 R 2.22AB549 R 2.31AB550 R 3.50AB551 R 6.11AB553 R 1,839.55AB554 R 1,803.48AB556 R 2,272.38AB557 R 2,272.38AB559 R 712.29AB560 R 712.29AB561 R 32.24AB562 R 5.16AB563 R 72.06AB566 R 102.60AB567 R 106.70AB568 R 434.11AB569 R 735.07AB570 R 963.07AB571 R 319.47AB572 R 566.01AB573 R 1,266.30AB574 R 297.31AB575 R 353.86AB576 R 342.91AB577 R 210.95AB578 R 194.71AB579 R 3.33AB580 R 111.39AB581 R 217.27

2

AB582 R 200.81AB583 R 132.56AB584 R 204.65AB585 R 709.54AB586 R 197.62AB587 R 406.18AB588 R 68.57AB589 R 130.72AB590 R 160.26AB591 R 190.68AB592 R 208.36AB593 R 244.88AB594 R 314.75AB595 R 401.43AB596 R 328.42AB597 R 127.22AB598 R 290.67AB599 R 214.14AB600 R 338.57AB601 R 341.59AB602 R 9.69AB603 R 23.05AB604 R 38.13AB605 R 1.53AB606 R 492.48AB607 R 328.32AB608 R 328.32AB609 R 273.60AB611 R 276.97AB612 R 190.72AB613 R 335.45AB614 R 1.45AB615 R 90.29AB616 R 1.85AB617 R 111.83AB618 R 0.68AB619 R 22.57AB620 R 20.93AB621 R 20.29AB622 R 20.29AB624 R 11.10AB625 R 20.77AB626 R 22.42AB627 R 23.40AB628 R 27.99AB629 R 38.30AB630 R 14.10AB631 R 7.60AB632 R 14.10AB633 R 8.42AB634 R 9.12AB635 R 14.10AB636 R 21.14AB638 R 20.77AB639 R 20.77AB640 R 11.10AB641 R 14.10AB642 R 14.34AB643 R 11.30AB645 R 20.77AB646 R 22.42AB647 R 7.48AB648 R 8.07AB649 R 29.70AB650 R 14.10AB651 R 15.23AB652 R 27.99AB653 R 14.10AB654 R 20.77AB655 R 27.99AB656 R 5.53AB657 R 510.72AB658 R 319.88AB659 R 1,039.68AB660 R 5.08AB661 R 4.47AB662 R 8.73AB663 R 12.97AB664 R 19.63AB665 R 21.98AB666 R 45.10AB667 R 24.56AB668 R 23.70AB669 R 77.60AB670 R 84.83AB671 R 92.89AB672 R 5.08AB673 R 4.63AB674 R 9.53AB675 R 16.23AB676 R 21.64

AB677 R 22.98AB678 R 56.26AB679 R 26.22AB680 R 29.71AB681 R 101.78AB682 R 459.94AB683 R 50.57AB684 R 136.16AB685 R 50.57AB688 R 15.42AB689 R 3.21AB690 R 300.69AB692 R 335.62AB693 R 3.12AB694 R 15.54AB695 R 161.32AB696 R 1,739.45AB697 R 958.38AB698 R 139.54AB699 R 147.74AB700 R 55.40AB701 R 112.86AB702 R 88.24AB703 R 57.46AB704 R 104.65AB705 R 53.35AB706 R 174.42AB707 R 67.72AB708 R 43.09AB709 R 1,114.46AB710 R 77.98AB711 R 106.70AB712 R 63.61AB713 R 153.90AB714 R 80.03AB715 R 68.80AB716 R 8.11AB718 R 2.66AB719 R 5.65AB720 R 10.28AB721 R 7.56AB722 R 8.34AB723 R 15.29AB724 R 15.41AB725 R 11.81AB726 R 13.42AB727 R 9.94AB728 R 8.56AB729 R 9.03AB730 R 9.17AB731 R 8.79AB732 R 5.83AB733 R 7.41AB734 R 7.23AB735 R 7.62AB736 R 6.17AB737 R 14.23AB738 R 7.64AB739 R 11.27AB740 R 9.92AB741 R 19.78AB742 R 7.92AB743 R 11.94AB744 R 6.68AB745 R 391.98AB746 R 54.44AB747 R 68.80AB748 R 13.67AB749 R 6.27AB751 R 43.62AB752 R 10.58AB754 R 22.64AB755 R 6.04AB756 R 61.69AB757 R 3.74AB758 R 7.30AB759 R 4.56AB760 R 8.78AB761 R 9.48AB762 R 8.78AB763 R 11.06AB764 R 90.81AB765 R 1.95AB766 R 1.95AB767 R 1.95AB768 R 1.95AB769 R 1.56AB770 R 1.56AB771 R 1.56AB772 R 1.56AB773 R 2.64

AB774 R 1.56AB775 R 1.56AB776 R 2.64AB777 R 1.95AB778 R 2.78AB779 R 1.95AB780 R 2.64AB781 R 1.68AB782 R 3.25AB783 R 1.35AB784 R 1.56AB785 R 39.91AB786 R 44.65AB787 R 2.64AB788 R 15.95AB789 R 2.21AB790 R 1.56AB791 R 2.64AB792 R 1.95AB793 R 2.64AB794 R 1.73AB795 R 2.64AB796 R 1.56AB797 R 2.82AB798 R 1.56AB799 R 2.64AB800 R 2.78AB801 R 1.56AB803 R 1.95AB804 R 2.78AB805 R 1.95AB806 R 1.23AB807 R 1.56AB808 R 2.69AB809 R 1.56AB810 R 2.64AB811 R 1.56AB812 R 2.78AB813 R 1.56AB814 R 2.64AB815 R 1.95AB816 R 2.78AB817 R 1.95AB818 R 2.78AB819 R 1.56AB820 R 3.00AB821 R 1.56AB822 R 2.78AB823 R 1.56AB824 R 2.78AB825 R 1.56AB826 R 1.56AB827 R 21.45AB828 R 21.90AB829 R 18.87AB830 R 18.83AB831 R 21.45AB832 R 36.64AB833 R 21.59AB834 R 37.06AB835 R 19.73AB836 R 31.41AB837 R 18.92AB838 R 20.98AB839 R 18.06AB840 R 21.59AB841 R 18.30AB842 R 18.33AB843 R 30.08AB844 R 25.67AB845 R 19.62AB847 R 22.02AB848 R 25.41AB849 R 22.02AB851 R 43.43AB852 R 22.02AB853 R 22.02AB854 R 47.15AB855 R 49.97AB856 R 47.15AB857 R 50.03AB858 R 49.28AB859 R 49.97AB860 R 46.77AB861 R 54.41AB862 R 46.77AB863 R 131.44AB864 R 129.62AB865 R 113.53AB866 R 134.19AB867 R 113.20

AB868 R 104.36AB869 R 127.02AB870 R 118.88AB871 R 107.19AB872 R 3.01AB873 R 120.05AB874 R 166.82AB875 R 20.95AB876 R 19.13AB877 R 20.95AB878 R 18.50AB879 R 17.18AB880 R 19.13AB881 R 17.76AB882 R 20.36AB883 R 19.14AB884 R 19.47AB885 R 21.00AB886 R 19.73AB887 R 19.47AB888 R 66.69AB889 R 3.37AB891 R 5.04AB892 R 2.57AB893 R 3.04AB894 R 2.47AB895 R 2.72AB896 R 12.33AB897 R 26.20AB898 R 2.78AB899 R 2.50AB900 R 2.90AB901 R 3.33AB902 R 3.24AB903 R 1.73AB904 R 9.72AB905 R 10.98AB906 R 9.72AB907 R 8.13AB908 R 10.69AB909 R 9.43AB910 R 9.72AB911 R 9.72AB912 R 10.34AB913 R 9.72AB914 R 10.34AB915 R 10.17AB916 R 11.72AB917 R 9.72AB918 R 10.07AB919 R 6.67AB920 R 13.73AB921 R 11.46AB922 R 16.36AB923 R 14.43AB924 R 13.57AB925 R 12.27AB926 R 13.19AB927 R 14.95AB928 R 12.22AB929 R 11.43AB930 R 18.05AB931 R 10.97AB932 R 13.79AB933 R 11.06AB934 R 16.02AB935 R 11.43AB936 R 17.91AB937 R 17.46AB938 R 11.15AB939 R 17.46AB940 R 8.90AB941 R 8.90AB942 R 8.20AB943 R 8.88AB944 R 8.88AB945 R 11.43AB946 R 9.15AB947 R 7.96AB948 R 7.97AB949 R 11.30AB950 R 9.15AB951 R 7.38AB952 R 13.73AB953 R 7.96AB954 R 7.33AB955 R 16.21AB956 R 74.17AB957 R 8.78AB958 R 2.74AB959 R 8.32

AB960 R 8.47AB962 R 7.58AB963 R 8.86AB964 R 11.72AB965 R 14.20AB966 R 6.92AB967 R 8.57AB968 R 11.91AB969 R 10.86AB970 R 8.49AB971 R 12.33AB972 R 6.63AB973 R 8.88AB974 R 8.88AB975 R 8.88AB976 R 9.78AB978 R 8.32AB979 R 10.10AB980 R 10.51AB981 R 5.76AB982 R 7.97AB983 R 9.63AB984 R 10.86AB985 R 9.88AB986 R 9.68AB987 R 7.38AB988 R 57.46AB989 R 14.57AB990 R 18.60AB991 R 31.89AB992 R 69.49AB993 R 68.80AB994 R 21.15AB995 R 6.84AB996 R 2.03AB997 R 2.09AB998 R 8.88

AC001 R 15.80AC002 R 32.60AC003 R 27.59AC004 R 18.29AC005 R 20.02AC006 R 18.29AC007 R 19.46AC008 R 547.20AC009 R 319.20AC010 R 153.90AC011 R 8,178.69AC012 R 4,172.80AC013 R 743.61AC014 R 20.02AC015 R 28.03AC016 R 18.29AC017 R 27.98AC018 R 31.02AC019 R 10.94AC020 R 8.87AC023 R 18.66AC024 R 54.83AC025 R 23.21AC026 R 22.70AC027 R 39.43AC030 R 35.63AC031 R 20.75AC032 R 2.91AC033 R 3.14AC034 R 2.91AC035 R 3.99AC036 R 3.99AC037 R 3.76AC038 R 3.99AC039 R 4.00AC040 R 4.39AC041 R 4.39AC042 R 4.74AC043 R 4.39AC044 R 6.61AC045 R 9.91AC046 R 10.78AC047 R 10.77AC048 R 10.73AC049 R 10.39AC050 R 10.72AC051 R 11.31AC052 R 11.15AC053 R 10.51AC054 R 10.58AC055 R 13.02AC056 R 13.12AC057 R 14.64

AC058 R 14.55AC059 R 11.50AC060 R 11.07AC061 R 7.95AC062 R 9.94AC063 R 7.96AC064 R 8.21AC065 R 7.98AC066 R 7.95AC067 R 11.07AC068 R 8.57AC069 R 9.80AC070 R 1.21AC071 R 2.87AC072 R 2.90AC073 R 2.67AC074 R 1.43AC075 R 2.67AC076 R 2.35AC077 R 2.37AC078 R 2.57AC079 R 2.88AC080 R 1.13AC081 R 2.67AC082 R 2.37AC083 R 2.67AC084 R 2.37AC085 R 1.38AC086 R 2.67AC087 R 2.38AC088 R 2.59AC089 R 1.38AC090 R 2.67AC091 R 2.88AC092 R 2.67AC093 R 0.78AC094 R 2.67AC095 R 2.37AC096 R 2.87AC097 R 1.38AC098 R 2.59AC099 R 2.85AC100 R 2.88AC101 R 2.59AC102 R 2.57AC103 R 1.28AC104 R 2.59AC105 R 2.75AC106 R 2.88AC107 R 2.62AC108 R 2.85AC109 R 1.39AC110 R 2.88AC111 R 2.75AC112 R 2.78AC113 R 2.70AC114 R 2.88AC115 R 1.38AC116 R 2.59AC117 R 2.57AC118 R 2.60AC119 R 2.57AC120 R 1.27AC121 R 2.76AC122 R 2.68AC123 R 2.84AC124 R 2.88AC125 R 2.57AC126 R 2.47AC127 R 2.85AC128 R 2.79AC129 R 2.62AC130 R 2.57AC131 R 1.29AC132 R 2.30AC133 R 2.57AC134 R 2.88AC135 R 2.88AC136 R 1.28AC137 R 2.55AC138 R 2.58AC139 R 2.58AC140 R 1.38AC141 R 2.85AC142 R 2.62AC143 R 2.57AC144 R 2.52AC145 R 1.27AC146 R 2.58AC147 R 2.63AC148 R 2.85


3







AC797 R 7.71AC798 R 7.57AC799 R 39.68AC800 R 8.25AC801 R 8.95AC802 R 7.30AC803 R 7.23AC804 R 10.33AC805 R 6.06AC807 R 48.62AC808 R 14.52AC809 R 117.42AC810 R 144.62AC811 R 22.31AC812 R 61.56AC813 R 1.27AC814 R 1.85AC815 R 1.64AC816 R 1.85AC817 R 2.63AC818 R 7.06AC820 R 2.46AC821 R 3.03AC822 R 2.83AC823 R 5.40AC824 R 20.52AC825 R 45.69AC826 R 45.69AC827 R 17.51AC828 R 18.34AC829 R 4,856.29AC830 R 20.63AC831 R 5.70AC832 R 12.54AC833 R 18.24AC834 R 133.38AC835 R 133.38AC836 R 102.60AC837 R 141.59AC838 R 119.02AC839 R 11.40AC840 R 24.62AC841 R 138.51AC842 R 152.36AC843 R 100.38AC844 R 305.41AC845 R 26.27AC846 R 55.87AC847 R 99.56AC848 R 38.99AC849 R 15.22AC850 R 1.47AC851 R 2.19AC852 R 3.24AC853 R 4.01AC854 R 42.73AC855 R 241.58AC856 R 241.58AC857 R 184.44AC858 R 163.66AC859 R 153.42AC860 R 13.11AC861 R 13.52AC862 R 519.61AC863 R 11.75AC864 R 14.10AC865 R 14.34AC866 R 14.10AC867 R 14.10AC868 R 15.23AC869 R 14.10AC870 R 14.10AC871 R 14.10AC872 R 14.10AC873 R 14.10AC874 R 14.10AC875 R 14.10AC876 R 15.23AC877 R 15.23AC878 R 15.23AC879 R 15.23AC880 R 7.48AC881 R 5.53AC882 R 8.07AC883 R 3.12AC884 R 193.33AC885 R 65.63AC886 R 18.24AC887 R 620.16AC888 R 55.06AC889 R 113.58

4

AC890 R 230.47AC891 R 71.82AC892 R 30.78AC893 R 22.80AC894 R 171.96AC895 R 77.11AC896 R 5.12AC897 R 13.57AC898 R 28.00AC899 R 18.05AC900 R 6.86AC901 R 16.51AC902 R 42.97AC903 R 41.46AC904 R 69.65AC905 R 74.03AC906 R 74.03AC907 R 8.60AC908 R 202.22AC909 R 3.42AC910 R 7.98AC911 R 7.68AC912 R 7.68AC913 R 21.76AC914 R 16.94AC915 R 15.05AC916 R 126.20AC917 R 9.28AC918 R 326.03AC919 R 2.74AC920 R 3.42AC921 R 3.42AC922 R 2.91AC923 R 5.75AC924 R 5.84AC925 R 5.84AC926 R 5.84AC927 R 48.85AC928 R 5.70AC929 R 0.86AC930 R 3.42AC931 R 0.44AC932 R 0.86AC933 R 0.62AC934 R 0.62AC935 R 0.75AC936 R 1.71AC937 R 0.86AC938 R 2.78AC939 R 3.08AC940 R 3.42AC941 R 5.02AC942 R 11.40AC943 R 26.27AC944 R 11.40AC946 R 0.51AC947 R 0.41AC948 R 0.51AC949 R 70.86AC950 R 75.72AC951 R 15.96AC952 R 21.66AC953 R 3,348.16AC954 R 11.06AC955 R 42.93AC956 R 5.02AC957 R 200.22AC958 R 184.22AC959 R 190.70AC960 R 230.87AC961 R 199.09AC962 R 321.90AC963 R 193.36AC964 R 193.36AC965 R 399.18AC966 R 499.88AC967 R 259.35AC968 R 780.60AC969 R 172.76AC970 R 143.01AC971 R 143.01AC972 R 199.09AC973 R 199.09AC974 R 192.73AC975 R 169.47AC976 R 161.89AC977 R 195.77AC978 R 240.53AC979 R 88.09AC980 R 159.61AC981 R 134.43

AC982 R 176.83AC983 R 35.36AC984 R 45.33AC985 R 7.59AC986 R 912.65AC987 R 797.27AC988 R 752.81AC989 R 240.21AC990 R 373.58AC991 R 488.00AC992 R 701.74AC993 R 904.12AC994 R 531.50AC995 R 1,273.96AC996 R 701.93AC997 R 5.02AC998 R 4.37AC999 R 22.01

AD001 R 73.02AD002 R 68.99AD003 R 69.55AD004 R 11.92AD005 R 64.58AD006 R 13.34AD007 R 12.38AD008 R 22.04AD009 R 20.77AD010 R 70.86AD011 R 10.67AD012 R 17.68AD013 R 12.85AD014 R 8.57AD015 R 38.10AD016 R 17.36AD017 R 71.32AD018 R 18.98AD019 R 3.34AD020 R 3.40AD021 R 3.43AD022 R 3.75AD023 R 5.71AD024 R 8.95AD025 R 9.98AD026 R 9.63AD027 R 12.05AD028 R 14.46AD029 R 19.62AD030 R 1.03AD031 R 1.03AD032 R 3.34AD033 R 3.34AD034 R 3.55AD035 R 3.55AD036 R 3.43AD037 R 4.01AD038 R 3.75AD039 R 3.74AD040 R 3.75AD041 R 4.53AD042 R 4.99AD043 R 5.19AD044 R 15.42AD045 R 15.42AD046 R 15.42AD047 R 15.42AD048 R 15.42AD049 R 2.37AD050 R 2.63AD051 R 6.73AD052 R 239.45AD053 R 25.01AD054 R 989.36AD055 R 16.88AD056 R 16.99AD057 R 25.84AD058 R 14.81AD059 R 14.79AD060 R 14.65AD061 R 300.66AD062 R 6.48AD063 R 6.48AD064 R 68.34AD065 R 6.48AD066 R 68.34AD067 R 6.48AD068 R 68.34AD069 R 71.82AD070 R 3.23AD071 R 33.79AD072 R 1.09

AD073 R 8.61AD074 R 5.68AD075 R 8.61AD076 R 0.72AD077 R 5.62AD078 R 0.72AD079 R 5.62AD080 R 19.45AD081 R 5.62AD082 R 5.13AD083 R 4.64AD084 R 4.64AD085 R 3.31AD086 R 3.42AD087 R 2.39AD088 R 2.74AD089 R 2.74AD090 R 3.65AD091 R 2.05AD092 R 2.74AD093 R 2.96AD094 R 2.74AD095 R 2.05AD096 R 3.42AD097 R 9.12AD098 R 11.97AD099 R 8.57AD100 R 8.34AD101 R 83.22AD102 R 32.51AD103 R 3.17AD104 R 2.29AD105 R 3.17AD106 R 5.46AD107 R 16.99AD108 R 3.53AD109 R 3.25AD110 R 2.42AD111 R 4.31AD112 R 5.65AD113 R 5.04AD114 R 5.13AD115 R 71.32AD116 R 2.29AD117 R 3.60AD118 R 3.20AD119 R 3.60AD120 R 3.60AD121 R 4.32AD122 R 5.04AD123 R 4.92AD124 R 11.38AD125 R 14.25AD126 R 13.34AD127 R 14.93AD128 R 3.42AD129 R 2.74AD130 R 2.74AD131 R 2.96AD132 R 3.99AD133 R 5.02AD134 R 4.56AD135 R 4.56AD136 R 4.56AD137 R 5.02AD138 R 5.02AD139 R 5.70AD140 R 5.02AD141 R 5.02AD142 R 4.56AD143 R 4.56AD144 R 5.02AD145 R 5.70AD146 R 4.56AD147 R 6.84AD148 R 7.98AD149 R 20.41AD150 R 9.12AD151 R 9.23AD152 R 0.11AD153 R 0.05AD154 R 0.32AD155 R 39.50AD156 R 15.96AD157 R 3.21AD158 R 2.87AD159 R 2.87AD160 R 2.87AD161 R 2.87AD162 R 2.87AD163 R 2.87

AD164 R 2.87AD165 R 53.04AD166 R 289.38AD167 R 10.65AD168 R 20.55AD169 R 3.42AD170 R 4.26AD171 R 1.71AD172 R 2.05AD173 R 2.05AD174 R 2.57AD175 R 2.74AD176 R 3.42AD177 R 3.42AD178 R 3.42AD179 R 3.42AD180 R 3.42AD181 R 3.42AD184 R 5.32AD185 R 8.89AD186 R 8.89AD187 R 8.89AD188 R 6.61AD189 R 26.37AD190 R 26.37AD191 R 52.75AD192 R 67.35AD193 R 43.43AD194 R 50.00AD195 R 6.86AD196 R 81.48AD197 R 37.60AD198 R 7.14AD199 R 99.29AD200 R 29.72AD201 R 29.72AD202 R 29.72AD203 R 29.72AD204 R 19.10AD205 R 42.41AD206 R 42.41AD207 R 42.41AD208 R 42.41AD209 R 32.62AD210 R 32.62AD211 R 33.73AD212 R 33.73AD213 R 23.94AD214 R 28.59AD215 R 23.94AD216 R 23.94AD217 R 23.94AD218 R 1.71AD219 R 3.42AD220 R 3.42AD221 R 2.74AD222 R 2.51AD223 R 2.85AD224 R 5.68AD225 R 3.23AD226 R 15.96AD227 R 15.96AD228 R 1.20AD229 R 10.88AD230 R 20.12AD231 R 1.88AD232 R 112.86AD233 R 16.83AD234 R 32.73AD235 R 32.71AD236 R 32.71AD237 R 36.42AD238 R 35.86AD239 R 30.78AD240 R 11.63AD241 R 32.64AD242 R 27.49AD243 R 31.68AD244 R 15.96AD245 R 22.57AD246 R 73.87AD247 R 510.46AD248 R 44.31AD249 R 4.49AD250 R 21.23AD251 R 20.33AD252 R 2.60AD253 R 10.81AD254 R 0.96AD255 R 1.13AD256 R 1.13

AD257 R 1.13AD258 R 1.13AD259 R 1.13AD260 R 3.72AD261 R 3.72AD262 R 28.19AD263 R 13.22AD264 R 3.75AD265 R 214.18AD266 R 44.31AD267 R 69.02AD268 R 66.61AD269 R 66.48

BB007 R 145.77

DB001 R 8.23DB003 R 7.98DB017 R 8.17DB018 R 7.25DB019 R 1.04DB020 R 0.14DB021 R 0.09DB022 R 0.14DB023 R 0.14DB024 R 0.14DB025 R 0.09DB026 R 0.09DB027 R 0.14DB028 R 0.09DB029 R 0.09DB030 R 0.14DB031 R 0.14DB032 R 0.09DB033 R 0.14DB034 R 0.18DB035 R 0.09DB036 R 0.09DB037 R 0.14DB038 R 0.14DB039 R 0.14DB040 R 0.09DB041 R 0.09DB042 R 0.14DB043 R 0.08DB044 R 0.07DB045 R 0.14DB046 R 0.18DB047 R 0.14DB048 R 0.07DB049 R 0.09DB050 R 0.09DB051 R 0.14DB052 R 0.07DB053 R 0.07DB054 R 0.07DB055 R 0.14DB056 R 0.06DB057 R 0.09DB058 R 0.07DB059 R 0.09DB060 R 0.14DB061 R 0.09DB062 R 0.09DB063 R 0.07DB064 R 0.15DB065 R 0.14DB066 R 0.09DB067 R 0.09DB068 R 0.07DB069 R 0.09DB070 R 0.08DB071 R 0.07DB072 R 0.07DB073 R 0.14DB074 R 0.14DB075 R 0.14DB076 R 0.07DB077 R 0.14DB078 R 0.09DB079 R 0.09DB080 R 0.14DB081 R 0.09DB082 R 0.09DB083 R 0.14DB084 R 0.09DB085 R 0.14DB086 R 0.14DB087 R 0.09DB088 R 0.14DB089 R 0.14

DB090 R 0.14DB091 R 0.09DB092 R 0.09DB093 R 0.14DB094 R 0.09DB095 R 0.14DB096 R 0.09DB097 R 0.14DB098 R 0.09DB099 R 0.09DB100 R 0.09DB101 R 0.14DB102 R 0.14DB103 R 0.09DB104 R 0.14DB105 R 0.14DB110 R 0.68DB111 R 0.41DB112 R 0.46DB113 R 0.46DB114 R 0.46DB115 R 0.51DB116 R 0.52DB117 R 0.46DB118 R 0.62DB119 R 0.52DB120 R 0.57DB121 R 0.46DB122 R 0.73DB123 R 0.52DB124 R 0.46DB125 R 0.71DB126 R 0.46DB127 R 0.55DB128 R 0.68DB129 R 0.41DB130 R 0.41DB131 R 0.46DB132 R 0.46DB133 R 0.46DB134 R 0.55DB135 R 2.74DB136 R 2.62DB137 R 3.42DB138 R 2.86DB139 R 2.86DB140 R 2.39DB141 R 2.39DB142 R 2.86DB143 R 2.86DB144 R 2.64DB145 R 2.46DB146 R 2.05DB147 R 2.86DB148 R 2.05DB149 R 2.86DB150 R 2.80DB151 R 2.74DB152 R 4.41DB153 R 3.03DB154 R 2.46DB155 R 3.18DB156 R 3.00DB157 R 3.03DB158 R 3.02DB159 R 3.01DB160 R 3.04DB161 R 3.27DB162 R 3.02DB163 R 3.01DB164 R 3.01DB165 R 2.44DB166 R 3.01DB167 R 3.01DB168 R 2.99DB169 R 3.03DB170 R 3.35DB171 R 2.77DB172 R 2.77DB173 R 3.29DB174 R 2.49DB175 R 0.23DB176 R 0.35DB177 R 0.34DB178 R 0.23DB179 R 0.34DB180 R 0.23DB181 R 0.23DB182 R 0.23DB183 R 0.34DB184 R 0.34


5





DB682 R 5.40DB683 R 6.99DB684 R 5.70DB685 R 8.00DB686 R 10.84DB687 R 11.56DB697 R 1.03DB698 R 3.09DB699 R 3.18DB700 R 11.40DB701 R 14.82DB702 R 12.73DB703 R 10.97DB704 R 10.97DB705 R 11.25DB706 R 10.26DB707 R 6.38DB708 R 10.26DB709 R 10.97DB710 R 12.96DB711 R 11.40DB712 R 13.00DB713 R 9.92DB714 R 14.82DB715 R 12.26DB716 R 12.22DB717 R 11.40DB718 R 18.07DB719 R 13.45DB720 R 9.92DB721 R 14.30DB722 R 9.92DB723 R 13.00DB724 R 9.12DB725 R 11.40DB726 R 10.83DB728 R 7.98DB729 R 25.55DB730 R 34.88DB731 R 18.24DB732 R 32.38DB734 R 5.93DB735 R 0.68DB736 R 26.68DB737 R 32.65DB738 R 5.13DB739 R 3.99DB740 R 11.29DB741 R 10.70DB742 R 11.40DB743 R 0.68DB745 R 0.23DB746 R 9.72DB747 R 7.01

EB003 R 40.05EB004 R 1.85EB018 R 20.29EB019 R 20.29EB021 R 20.29EB022 R 22.98EB023 R 20.29EB024 R 21.66EB025 R 22.57EB026 R 18.01EB027 R 20.29EB028 R 22.57EB029 R 20.29EB030 R 20.29EB032 R 38.58EB033 R 57.46EB035 R 93.37EB036 R 92.13EB037 R 94.19EB040 R 0.07EB041 R 0.07EB042 R 0.07EB043 R 0.07EB044 R 0.07EB045 R 0.11EB046 R 0.07EB047 R 0.07EB048 R 0.07EB049 R 0.07EB050 R 0.07EB051 R 0.07EB052 R 0.11EB053 R 0.09EB054 R 0.16EB055 R 0.11EB056 R 0.11

EB057 R 0.07EB058 R 0.11EB059 R 0.11EB060 R 0.11EB061 R 0.11EB062 R 0.16EB063 R 0.11EB064 R 0.11EB065 R 0.09EB066 R 0.16EB067 R 0.11EB068 R 0.09EB069 R 0.11EB070 R 0.11EB071 R 0.09EB072 R 0.11EB073 R 0.09EB074 R 0.11EB075 R 0.07EB076 R 0.07EB077 R 0.07EB078 R 0.11EB079 R 0.11EB080 R 0.07EB081 R 0.11EB082 R 0.09EB083 R 0.11EB084 R 0.07EB085 R 0.07EB086 R 0.09EB087 R 0.11EB088 R 0.07EB089 R 0.09EB090 R 0.11EB091 R 0.09EB092 R 0.07EB093 R 0.09EB094 R 0.11EB095 R 0.09EB096 R 0.07EB097 R 0.07EB098 R 0.09EB099 R 0.11EB100 R 0.11EB101 R 0.11EB102 R 0.11EB103 R 0.11EB104 R 0.09EB105 R 0.09EB106 R 0.09EB107 R 0.11EB108 R 0.09EB109 R 0.11EB110 R 0.07EB111 R 0.09EB112 R 0.09EB113 R 0.07EB114 R 0.11EB115 R 0.11EB116 R 0.09EB117 R 0.07EB118 R 0.11EB119 R 0.07EB120 R 0.11EB121 R 0.07EB122 R 0.07EB123 R 0.07EB124 R 0.09EB125 R 0.09EB126 R 0.09EB127 R 2.74EB128 R 0.41EB129 R 25.89EB131 R 20.29EB132 R 49.25EB133 R 50.48EB134 R 34.88EB140 R 4.31EB141 R 5.02EB142 R 48.51EB143 R 18.14EB155 R 1.61EB156 R 3.80EB157 R 1.12EB158 R 2.50EB159 R 2.37EB160 R 16.53EB162 R 97.07EB164 R 73.15EB165 R 3.36EB166 R 3.36


6




EB850 R 3,445.73EB858 R 54.33EB861 R 3.39EB862 R 2.62EB865 R 3.34EB867 R 2.92EB868 R 2.27EB870 R 2.93EB871 R 3.29EB872 R 2.80EB873 R 3.45EB874 R 2.45EB876 R 242.99EB877 R 226.22EB878 R 3.09EB879 R 3.18EB880 R 54.13EB881 R 2.30EB882 R 2.28EB883 R 7.57EB884 R 10.99EB886 R 3.23EB887 R 20.93EB888 R 29.57EB889 R 142.03EB890 R 210.67EB891 R 3.52EB892 R 3.43EB893 R 2.83EB895 R 6.73EB896 R 9.03EB897 R 2.36EB898 R 1.20EB899 R 21.27EB900 R 15.71EB901 R 11.13EB902 R 9.92EB903 R 8.64EB904 R 13.50EB905 R 6.35EB906 R 26.06EB907 R 6.84EB908 R 43.43EB909 R 46.02EB910 R 30.78EB911 R 52.33EB912 R 36.02EB914 R 10.24EB920 R 2.96EB921 R 86.18EB924 R 334.53EB925 R 109.04EB926 R 6.34EB927 R 4.33EB928 R 0.81EB929 R 0.58EB930 R 8.48EB931 R 40.07EB932 R 2.85EB934 R 27.19EB936 R 0.95EB937 R 16.84EB941 R 2.57EB942 R 2.44EB955 R 19.38EB969 R 10.99EB970 R 4.56EB971 R 6.61EB977 R 2.39EB988 R 13.20EB997 R 3.19

FB017 R 43.43FB018 R 793.44FB046 R 24.60FB047 R 160.06FB052 R 3.99FB053 R 1.13FB054 R 2.71FB055 R 0.75FB056 R 0.44FB057 R 1.61FB058 R 0.49FB059 R 3.34FB061 R 0.38FB062 R 0.48FB063 R 1.72FB064 R 2.85FB065 R 0.93FB066 R 1.48FB067 R 0.17

FB069 R 0.25FB076 R 3.26FB077 R 51.73FB078 R 14.87FB079 R 13.73FB080 R 13.73FB081 R 13.73FB085 R 499.37FB086 R 350.12FB087 R 430.13FB088 R 790.43FB089 R 273.47FB090 R 104.65FB091 R 6.19FB092 R 6.62FB093 R 87.67FB094 R 61.71FB095 R 183.31FB096 R 312.43FB097 R 49.52FB098 R 32.09FB099 R 46.53FB100 R 26.31FB101 R 31.67FB102 R 70.22FB103 R 190.57FB104 R 4.61FB105 R 243.85FB106 R 68.23FB107 R 73.55FB108 R 201.53FB109 R 132.35FB110 R 75.08FB114 R 291.97FB116 R 76.09FB117 R 20.70FB118 R 65.36FB119 R 327.17FB120 R 641.68FB124 R 500.07FB125 R 4.17FB127 R 6.61FB128 R 9.42FB130 R 3.12FB131 R 5.12FB132 R 8.23FB134 R 2.10FB135 R 2.13FB136 R 2.36FB137 R 3.02FB138 R 4.07FB139 R 3.42FB140 R 5.56FB141 R 2.09FB142 R 2.69FB143 R 2.60FB144 R 3.36FB145 R 2.64FB146 R 3.37FB147 R 13.19FB148 R 3.42FB149 R 4.29FB150 R 22.34FB151 R 51.30FB152 R 3.31FB154 R 10.94FB157 R 2.51FB158 R 2.74FB159 R 4.10FB160 R 1.16FB161 R 0.55FB162 R 1.03FB163 R 0.65FB164 R 0.75FB165 R 0.68FB166 R 0.96FB167 R 0.68FB168 R 0.64FB169 R 0.68FB170 R 3.01FB181 R 3.42FB182 R 4.10FB184 R 6.61FB185 R 3.31FB186 R 4.67FB187 R 5.70FB189 R 29.14FB190 R 23.02FB192 R 20.29FB193 R 21.55FB196 R 36.83



7


FB692 R 162.03FB694 R 84.30FB695 R 186.45FB696 R 549.89FB697 R 676.07FB698 R 1,446.23FB705 R 1.54FB706 R 2.50FB707 R 2.86FB708 R 2.60FB709 R 2.58FB710 R 2.74FB711 R 3.01FB712 R 3.01FB713 R 3.01FB714 R 3.39FB715 R 78.23FB717 R 558.90FB720 R 11.40FB723 R 70.45FB724 R 1.33FB725 R 51.88FB726 R 82.08FB727 R 60.77FB728 R 40.66FB729 R 30.87FB749 R 3.18FB751 R 0.57FB752 R 0.56FB753 R 2.44FB754 R 2.51FB756 R 6.49FB757 R 7.59FB764 R 6.70FB766 R 4.91FB767 R 7.85FB768 R 2.31FB770 R 2.23FB790 R 6.67FB791 R 6.46FB798 R 9.47FB799 R 26.03FB800 R 21.74FB801 R 12.57FB803 R 11.07FB804 R 29.10FB805 R 9.72FB806 R 11.61FB807 R 13.18FB808 R 12.36FB809 R 14.50FB810 R 13.61FB811 R 24.16FB812 R 28.18FB813 R 47.01FB815 R 47.57FB817 R 14.51FB818 R 17.27FB819 R 22.55FB820 R 12.27FB821 R 16.67FB822 R 18.67FB823 R 15.95FB824 R 11.39FB825 R 17.09FB826 R 253.88FB828 R 219.13FB829 R 216.74FB830 R 0.68FB831 R 1.57FB833 R 3.27FB834 R 19.47FB836 R 9.94FB837 R 4.35FB838 R 3.23FB842 R 6.77FB843 R 5.06FB846 R 4.23FB848 R 17.00FB849 R 4.13FB850 R 5.22FB852 R 7.81FB853 R 12.64FB854 R 2.78FB855 R 3.09FB857 R 10.47FB860 R 4.57FB861 R 3.48FB862 R 7.11FB863 R 13.00FB864 R 35.70

FB865 R 31.40FB866 R 92.13FB867 R 45.14FB868 R 84.54FB869 R 121.89FB870 R 53.25FB871 R 10.32FB872 R 16.01FB873 R 7.06FB875 R 7.16FB877 R 8.15FB878 R 9.02FB880 R 16.70FB882 R 15.55FB884 R 8.94FB885 R 2.69FB888 R 2.69FB891 R 3.20FB892 R 16.34FB893 R 3.20FB895 R 2.83FB902 R 0.59FB903 R 14.44FB904 R 16.86FB906 R 2.79FB907 R 2.06FB910 R 1.46FB911 R 2.34FB913 R 232.69FB914 R 162.21FB915 R 193.61FB916 R 200.00FB917 R 200.00FB918 R 269.77FB919 R 339.54FB920 R 0.34FB921 R 0.39FB922 R 0.41FB923 R 0.43FB924 R 0.38FB925 R 0.59FB926 R 0.80FB927 R 0.80FB931 R 1.37FB934 R 7.64FB935 R 3.40FB936 R 6.63FB938 R 5.53FB939 R 4.63FB942 R 3.21FB943 R 0.72FB947 R 3.58FB950 R 20.38FB953 R 3.27FB955 R 3.27FB956 R 2.47FB962 R 0.86FB965 R 1.16FB967 R 9.87

GB149 R 2.36GB150 R 13.57GB151 R 1.60GB152 R 3.28GB154 R 43.22GB156 R 5.62GB157 R 3.28GB158 R 5.59GB159 R 5.40GB162 R 2.96GB164 R 6.12GB166 R 8.76GB169 R 5.48GB171 R 24.04GB172 R 0.84GB174 R 3.97GB176 R 20.57GB177 R 6.36GB178 R 48.89GB179 R 21.27GB182 R 26.16GB184 R 18.47GB186 R 2.74GB189 R 2.41GB190 R 2.74GB191 R 13.13GB192 R 22.17GB194 R 404.93GB195 R 127.22GB196 R 2.37GB198 R 123.02

GB200 R 5.51GB202 R 10.69GB203 R 7.16GB204 R 3.48GB205 R 22.12GB207 R 1.16GB209 R 2.74GB213 R 22.25GB218 R 127.22GB219 R 59.30GB220 R 92.13GB222 R 4.56GB224 R 4.61GB226 R 2.29GB227 R 1.79GB228 R 2.37GB229 R 9.55GB231 R 8.87GB235 R 12.28GB238 R 8.62GB239 R 10.26GB241 R 4.42GB243 R 11.29GB246 R 5.56GB247 R 2.67GB249 R 16.71GB250 R 78.80GB251 R 66.98GB256 R 2.39GB257 R 7.55GB263 R 8.53GB266 R 0.89GB267 R 108.35GB268 R 39.81GB275 R 9.38GB277 R 4.10GB278 R 3.57GB283 R 10.26GB284 R 17.10GB289 R 6.19GB290 R 0.34GB291 R 4.61GB292 R 8.85GB294 R 4.61GB296 R 4.42GB297 R 3.42GB299 R 5.29GB309 R 31.86GB313 R 18.31GB320 R 3.83GB321 R 10.94GB322 R 6.06GB323 R 9.60GB324 R 11.25GB325 R 6.82GB326 R 36.24GB329 R 4.56GB330 R 11.16GB333 R 5.49GB334 R 4.26GB338 R 9.04GB339 R 2.90GB341 R 5.79GB343 R 6.83GB345 R 4.38GB351 R 18.76GB354 R 2.36GB359 R 485.72GB364 R 273.60GB365 R 273.60GB366 R 310.08GB367 R 456.00GB368 R 58.68GB369 R 392.80GB370 R 276.48GB373 R 456.00GB375 R 10.40GB376 R 11.98GB377 R 38.22GB378 R 50.66GB379 R 36.07GB380 R 28.26GB381 R 129.18GB382 R 10.17GB383 R 11.29GB384 R 15.85GB385 R 16.32GB386 R 7.84GB387 R 19.49GB388 R 3.67GB389 R 24.97

GB391 R 21.71GB392 R 10.58GB393 R 17.10GB394 R 19.49GB395 R 26.78GB396 R 34.17GB397 R 51.69GB398 R 46.59GB399 R 22.47GB403 R 305.41GB404 R 305.41GB407 R 289.92GB409 R 126.13GB410 R 0.68GB418 R 4.22GB421 R 37.24GB426 R 4.42GB427 R 61.79GB460 R 2.92GB463 R 1.47GB464 R 3.42GB469 R 3.41GB477 R 3.21GB478 R 11.02GB483 R 20.66GB490 R 272.49GB491 R 2.62GB492 R 6.34GB493 R 174.29GB494 R 95.03GB496 R 88.24GB497 R 13.68GB499 R 31.51GB500 R 36.97GB501 R 5.13GB502 R 20.83GB503 R 40.62GB505 R 3.23GB506 R 2.62GB507 R 11.05GB508 R 1.97GB509 R 28.16GB510 R 35.84GB511 R 51.89GB512 R 84.68GB513 R 105.58GB514 R 188.10GB515 R 220.64GB516 R 227.68GB517 R 98.50GB518 R 55.61GB519 R 121.58GB520 R 1.36GB521 R 2.15GB522 R 27.41GB523 R 27.41GB526 R 3.09GB527 R 2.47GB529 R 5.11GB530 R 19.97GB531 R 19.03GB532 R 17.12GB533 R 551.75GB534 R 551.75GB535 R 313.00GB536 R 327.70GB537 R 307.67GB538 R 242.17GB539 R 289.38GB540 R 289.38GB541 R 289.38GB542 R 186.36GB543 R 297.43GB544 R 410.57GB545 R 462.11GB548 R 2.30GB549 R 8.84GB550 R 10.18GB551 R 3.42GB554 R 310.08GB556 R 66.11GB558 R 249.89GB559 R 436.49GB561 R 184.59GB562 R 166.11GB563 R 184.59GB565 R 72.79GB567 R 55.64GB568 R 1.95GB569 R 2.15GB570 R 3.39

GB571 R 16.15GB572 R 105.04GB574 R 41.75GB575 R 215.28GB576 R 1,491.09GB577 R 64.39GB578 R 6.36GB580 R 2.74GB581 R 8.73GB582 R 12.80GB583 R 10.09GB584 R 119.36GB585 R 37.02GB586 R 155.31GB587 R 54.80GB588 R 131.67GB589 R 80.20GB590 R 103.44GB591 R 98.19GB592 R 69.89GB593 R 48.07GB594 R 61.89GB595 R 82.38GB596 R 83.07GB597 R 130.92GB598 R 45.19GB599 R 63.68GB600 R 130.92GB601 R 121.71GB602 R 82.63GB603 R 77.38GB604 R 98.18GB605 R 197.00GB606 R 127.98GB607 R 53.90GB608 R 83.07GB609 R 58.72GB610 R 49.09GB611 R 81.62GB612 R 132.73GB613 R 191.91GB614 R 183.92GB616 R 0.36GB617 R 0.51GB618 R 0.51GB619 R 0.68GB620 R 0.72GB621 R 1.20GB622 R 0.78GB623 R 1.03GB624 R 1.00GB625 R 1.37GB626 R 3.19GB627 R 1.37GB628 R 1.13GB629 R 1.54GB630 R 4.56GB631 R 2.05GB632 R 1.44GB633 R 2.05GB634 R 3.42GB635 R 3.42GB636 R 1.65GB637 R 3.42GB638 R 4.61GB639 R 3.42GB640 R 5.70GB641 R 2.74GB642 R 2.06GB643 R 3.42GB644 R 0.46GB645 R 15.73GB646 R 121.28GB647 R 162.22GB648 R 1,714.96GB649 R 136.52GB650 R 86.26GB651 R 104.15GB652 R 80.66GB654 R 14.60GB658 R 698.75GB659 R 227.94GB660 R 82.25GB661 R 45.37GB662 R 342.72GB663 R 2.31GB664 R 41.75GB665 R 3.75GB666 R 22.80GB668 R 3.39GB669 R 3.53

GB670 R 418.19GB671 R 9.28GB672 R 109.88GB677 R 8.88GB678 R 28.73GB679 R 3.39GB680 R 46.20GB681 R 3.31GB682 R 26.68GB683 R 13.79GB684 R 13.38GB685 R 16.40GB686 R 12.26GB687 R 11.26GB688 R 12.35GB689 R 4.94GB690 R 5.16GB691 R 5.57GB692 R 1.93GB693 R 755.79GB694 R 2.37GB695 R 16.76GB696 R 20.49GB697 R 3.36GB698 R 90.70GB699 R 44.19GB700 R 44.61GB701 R 31.03GB702 R 447.30GB703 R 9.55GB706 R 2.58GB708 R 392.60GB709 R 82.43GB710 R 15.58GB711 R 51.33GB712 R 164.68GB714 R 21.27GB716 R 22.80GB717 R 73.20GB718 R 1.13GB720 R 0.76GB721 R 3.28GB722 R 2.63GB723 R 6.86GB724 R 6.46GB725 R 5.39GB726 R 192.99GB727 R 1.74GB728 R 85.48GB729 R 7.48GB731 R 2.52GB733 R 4.38GB734 R 204.15GB735 R 54.17GB741 R 3.28GB742 R 4.95GB743 R 3.77GB744 R 27.46GB745 R 5.53GB746 R 3.17GB747 R 1,271.70GB748 R 219.20GB749 R 105.77GB750 R 112.56GB751 R 88.26GB752 R 70.45GB753 R 55.87GB754 R 178.09GB755 R 215.40GB756 R 33.38GB757 R 106.07GB758 R 70.45GB759 R 141.35GB760 R 69.23GB761 R 35.00GB762 R 143.85GB763 R 178.09GB764 R 16.15GB765 R 45.06GB766 R 55.87GB767 R 188.73GB768 R 42.68GB769 R 97.77GB770 R 117.49GB771 R 197.28GB772 R 70.45GB773 R 84.43GB774 R 74.66GB775 R 84.43GB776 R 106.07GB777 R 106.07

8

GB778 R 112.40GB779 R 69.23GB780 R 52.65GB781 R 143.85GB782 R 93.66GB783 R 93.53GB784 R 35.00GB785 R 189.00GB786 R 37.75GB787 R 88.26GB788 R 121.16GB789 R 106.07GB790 R 74.66GB791 R 35.00GB792 R 52.65GB793 R 97.77GB794 R 55.87GB795 R 88.26GB796 R 106.07GB797 R 189.00GB798 R 117.49GB799 R 189.00GB800 R 78.03GB801 R 127.12GB802 R 189.72GB803 R 35.61GB804 R 70.45GB805 R 69.23GB806 R 123.29GB807 R 117.49GB808 R 143.85GB809 R 21.14GB810 R 20.77GB811 R 14.10GB812 R 135.90GB813 R 2,672.83GB814 R 113.28GB815 R 7.83GB816 R 7.83GB817 R 10.16GB818 R 10.16GB819 R 100.96GB820 R 6.40GB821 R 6.91GB822 R 10.29GB823 R 1,313.94GB824 R 240.08GB825 R 132.02GB826 R 153.47GB827 R 170.85GB828 R 192.32GB829 R 7.90GB830 R 2.71GB831 R 3.34GB832 R 13.74GB833 R 16.19GB834 R 3,545.82GB835 R 1,434.66GB836 R 51.52GB838 R 118.58GB839 R 105.99GB840 R 1,554.86GB901 R 37.46GB910 R 30.31GB959 R 2.54GB994 R 1.89GB995 R 222.88

GC013 R 3,503.39GC014 R 386.57GC015 R 7,852.08GC016 R 8,866.84GC017 R 2,287.00GC018 R 494.24GC019 R 121.28GC020 R 198.76GC021 R 334.89GC022 R 184.77GC023 R 201.34GC024 R 177.99GC025 R 105.47GC026 R 8,123.12GC027 R 3,378.62GC028 R 2,241.35GC029 R 1,596.97GC030 R 773.15GC031 R 186.72GC032 R 1,855.03GC033 R 144.19GC034 R 86.87GC035 R 106.73

GC036 R 427.39GC037 R 1,141.78GC038 R 156.52GC039 R 126.97GC040 R 872.70GC042 R 189.32GC043 R 402.74GC044 R 838.54GC045 R 133.15GC053 R 303.43GC054 R 189.74GC055 R 517.02GC056 R 416.25GC057 R 255.18GC058 R 152.40GC059 R 144.99GC060 R 588.60GC061 R 284.78GC063 R 308.43GC064 R 192.33GC065 R 141.22GC066 R 133.86GC067 R 190.98GC068 R 201.72GC069 R 243.56GC070 R 190.23GC071 R 105.94GC072 R 473.89GC073 R 54.06GC074 R 55.62GC075 R 270.47GC076 R 146.55GC077 R 177.14GC078 R 349.88GC079 R 119.67GC080 R 162.28GC081 R 205.14GC082 R 354.23GC083 R 188.92GC084 R 329.23GC085 R 280.39GC086 R 137.84GC087 R 1,260.93GC088 R 194.15GC089 R 69.30GC090 R 1,437.05GC091 R 1,149.70GC092 R 1,057.76GC093 R 290.94GC094 R 92.29GC095 R 185.24GC096 R 364.31GC097 R 1,107.49GC098 R 151.85GC099 R 557.89GC100 R 460.85GC101 R 135.50GC102 R 180.11GC103 R 192.40GC104 R 127.36GC105 R 78.92GC106 R 92.60GC107 R 2,115.12GC108 R 261.42GC109 R 166.86GC110 R 67.91GC111 R 236.32GC112 R 420.32GC113 R 463.47GC114 R 382.95GC115 R 463.49GC116 R 382.94GC117 R 360.57GC138 R 132.02GC139 R 139.10GC140 R 132.02GC141 R 132.02GC142 R 133.08GC143 R 155.34GC144 R 64.84GC230 R 117.42GC231 R 124.61GC232 R 124.61GC233 R 117.42GC238 R 163.08GC248 R 123.14GC249 R 117.94GC304 R 116.43GC317 R 18.71

HB001 R 12.77

HB015 R 12.59HB016 R 37.26HB019 R 7.14HB020 R 4.51HB021 R 6.04HB022 R 4.51HB023 R 14.40HB024 R 3.19HB025 R 3.45HB026 R 2.58HB028 R 3.53HB029 R 3.65HB030 R 0.62HB031 R 3.31HB032 R 11.15HB033 R 3.78HB034 R 2.87HB035 R 3.57HB038 R 4.56HB039 R 2.74HB040 R 12.95HB041 R 0.50HB042 R 5.93HB043 R 3.35HB044 R 10.26HB045 R 8.65HB046 R 3.35HB047 R 8.77HB048 R 8.89HB049 R 10.83HB050 R 7.23HB051 R 3.19HB052 R 0.15HB053 R 0.27HB054 R 1.11HB055 R 2.67HB056 R 0.50HB057 R 0.50HB058 R 0.42HB059 R 0.41HB060 R 0.50HB061 R 0.82HB062 R 0.51HB063 R 0.65HB064 R 0.78HB065 R 0.57HB066 R 0.65HB067 R 0.50HB068 R 0.62HB069 R 0.55HB070 R 0.48HB071 R 0.48HB072 R 2.53HB073 R 2.29HB074 R 0.41HB075 R 0.38HB076 R 0.71HB077 R 0.43HB078 R 0.49HB079 R 0.82HB080 R 4.43HB081 R 16.07HB082 R 15.94HB083 R 3.04HB084 R 2.22HB085 R 2.91HB086 R 5.93HB087 R 3.42HB088 R 3.08HB089 R 8.86HB090 R 14.99HB091 R 14.27HB092 R 12.04HB093 R 17.21HB094 R 10.29HB097 R 37.96HB098 R 28.58HB099 R 21.55HB100 R 2.26HB101 R 3.76HB103 R 2.95HB104 R 3.83HB105 R 3.14HB106 R 2.39HB107 R 3.61HB108 R 4.38HB109 R 4.04HB110 R 4.04HB111 R 2.70HB112 R 3.42HB113 R 1.71



HB312 R 14.23HB313 R 15.07HB314 R 14.73HB315 R 13.77HB316 R 18.70HB318 R 0.41HB319 R 0.57HB320 R 0.62HB321 R 0.50HB322 R 0.50HB323 R 0.50HB324 R 0.48HB325 R 0.50HB326 R 0.44HB327 R 0.48HB328 R 0.48HB329 R 0.48HB330 R 0.48HB331 R 0.50HB333 R 1.20HB335 R 0.86HB336 R 1.87HB337 R 0.89HB338 R 1.06HB339 R 0.99HB340 R 1.37HB341 R 1.03HB342 R 0.86HB343 R 1.40HB344 R 0.89HB345 R 1.03HB346 R 0.75HB347 R 1.04HB348 R 1.78HB349 R 1.03HB350 R 0.82HB351 R 1.40HB352 R 0.86HB353 R 1.04HB354 R 1.03HB355 R 1.03HB356 R 1.03HB357 R 1.04HB358 R 0.86HB359 R 0.99HB360 R 0.99HB361 R 0.99HB362 R 0.99HB363 R 0.68HB364 R 0.86HB365 R 1.20HB366 R 1.03HB367 R 1.30HB368 R 1.30HB369 R 21.96HB370 R 0.68HB371 R 3.01HB372 R 2.98HB373 R 3.42HB374 R 3.42HB375 R 9.12HB376 R 19.27HB377 R 20.06HB378 R 22.80HB379 R 1.27HB380 R 2.22HB381 R 3.42HB382 R 9.12HB383 R 9.10HB384 R 11.40HB385 R 33.76HB386 R 5.68

JB001 R 1.44JB002 R 2.28JB003 R 2.55JB004 R 2.92JB005 R 3.28JB006 R 3.65JB007 R 0.96JB008 R 0.41JB009 R 0.75JB010 R 0.57JB011 R 0.68JB012 R 0.72JB013 R 1.16JB014 R 1.37JB015 R 1.00JB016 R 1.29JB017 R 3.16JB018 R 3.19

JB019 R 0.57JB020 R 1.23JB021 R 1.23JB022 R 1.23JB023 R 0.81JB024 R 0.81JB025 R 0.81JB026 R 0.41JB027 R 0.81JB028 R 0.81JB029 R 0.81JB030 R 0.81JB031 R 0.41JB032 R 0.81JB033 R 0.81JB035 R 11.99JB036 R 12.00JB037 R 8.08JB038 R 1.16JB042 R 1.86JB043 R 1.72JB044 R 1.37JB045 R 2.05JB046 R 2.11JB047 R 2.37JB048 R 2.82JB049 R 3.27JB050 R 15.13JB051 R 42.69JB052 R 42.50JB053 R 1.85JB054 R 1.72JB056 R 5.75JB057 R 7.98JB058 R 2.39JB059 R 3.00JB060 R 2.96JB062 R 3.06JB064 R 7.98JB065 R 2.79JB066 R 4.29JB067 R 3.39JB068 R 2.43JB069 R 3.83JB071 R 3.28JB073 R 2.57JB074 R 6.09JB075 R 4.45JB076 R 2.85JB077 R 6.35JB078 R 3.39JB079 R 3.42JB080 R 2.39JB081 R 2.86JB082 R 3.43JB083 R 3.43JB084 R 3.12JB085 R 3.14JB086 R 13.28JB087 R 16.79JB088 R 3.72JB089 R 3.77JB090 R 2.85JB091 R 4.34JB092 R 3.42JB093 R 4.57JB094 R 2.74JB095 R 2.30JB096 R 2.45JB097 R 3.07JB098 R 2.85JB099 R 2.39JB100 R 3.25JB101 R 4.51JB102 R 2.88JB103 R 3.42JB104 R 2.74JB106 R 4.29JB108 R 5.02JB109 R 3.47JB110 R 5.43JB111 R 4.25JB112 R 3.08JB113 R 3.31JB114 R 7.98JB115 R 4.51JB116 R 4.26JB118 R 7.09JB119 R 3.42JB120 R 5.70JB121 R 6.62

9

JB122 R 4.01JB123 R 4.49JB125 R 0.81JB126 R 3.40JB127 R 2.61JB128 R 5.70JB129 R 94.53JB130 R 22.88JB134 R 150.53JB135 R 4.56JB136 R 12.55JB137 R 2.67JB138 R 33.76JB139 R 46.17JB140 R 0.62JB141 R 2.26JB143 R 4.33JB144 R 5.56JB145 R 5.11JB146 R 8.80JB147 R 7.30JB148 R 2.74JB149 R 4.99JB150 R 3.42JB151 R 3.42JB152 R 3.88JB153 R 3.97JB154 R 9.64JB155 R 17.78JB157 R 5.29JB158 R 2.94JB160 R 5.02JB161 R 6.52JB162 R 4.56JB164 R 3.42JB165 R 6.09JB167 R 4.10JB168 R 10.88JB169 R 6.04JB170 R 2.05JB171 R 3.24JB173 R 5.18JB175 R 2.37JB176 R 6.22JB177 R 4.29JB178 R 4.15JB179 R 7.20JB180 R 5.70JB181 R 4.56JB183 R 3.92JB185 R 6.48JB186 R 5.02JB187 R 16.64JB190 R 3.31JB191 R 3.65JB192 R 5.43JB193 R 3.65JB194 R 4.67JB195 R 5.13JB196 R 4.22JB197 R 3.53JB198 R 3.31JB200 R 7.30JB201 R 3.31JB206 R 1.16JB207 R 1.60JB208 R 2.60JB209 R 4.74JB210 R 11.30JB211 R 21.14JB212 R 7.06JB213 R 7.43JB215 R 4.51JB216 R 12.77JB218 R 0.49JB219 R 0.54JB220 R 2.05JB221 R 2.05JB222 R 1.03JB223 R 1.03JB225 R 12.97

KB001 R 0.21KB002 R 0.21KB003 R 0.32KB004 R 0.21KB005 R 0.25KB006 R 0.21KB007 R 0.32KB008 R 0.21KB009 R 0.27

KB010 R 0.21KB011 R 0.21KB012 R 0.21KB013 R 0.32KB014 R 0.21KB015 R 0.27KB016 R 0.21KB017 R 0.27KB018 R 0.27KB019 R 0.34KB020 R 0.21KB021 R 0.32KB022 R 0.21KB023 R 0.25KB024 R 0.21KB025 R 0.21KB026 R 0.14KB027 R 0.16KB028 R 0.21KB029 R 0.16KB030 R 0.21KB031 R 0.21KB032 R 0.21KB033 R 0.14KB034 R 0.21KB035 R 0.16KB036 R 0.21KB037 R 0.21KB038 R 0.21KB039 R 0.21KB040 R 0.21KB041 R 0.21KB042 R 0.14KB043 R 0.23KB044 R 0.21KB045 R 0.21KB046 R 0.21KB047 R 0.21KB048 R 0.21KB049 R 0.25KB050 R 0.14KB051 R 0.16KB052 R 0.18KB053 R 0.25KB054 R 0.21KB055 R 0.23KB056 R 0.14KB057 R 0.25KB058 R 0.25KB059 R 0.21KB060 R 0.21KB061 R 0.18KB062 R 0.23KB063 R 0.16KB064 R 0.21KB065 R 0.14KB066 R 0.16KB067 R 0.21KB068 R 0.21KB069 R 0.14KB070 R 0.16KB071 R 0.14KB072 R 0.21KB073 R 0.14KB074 R 0.14KB075 R 0.21KB076 R 0.21KB077 R 0.21KB078 R 0.25KB079 R 0.21KB080 R 0.16KB081 R 0.14KB082 R 0.14KB083 R 0.21KB084 R 0.21KB085 R 0.21KB086 R 0.21KB087 R 0.21KB088 R 0.21KB089 R 0.14KB090 R 0.21KB091 R 0.14KB092 R 0.21KB093 R 0.25KB094 R 0.25KB095 R 0.14KB096 R 0.25KB097 R 0.14KB098 R 0.21KB099 R 0.21KB100 R 0.14

KB101 R 0.21KB102 R 0.21KB103 R 0.21KB104 R 0.23KB105 R 0.14KB106 R 0.14KB107 R 0.21KB108 R 0.21KB109 R 0.31KB110 R 0.25KB111 R 0.21KB112 R 0.21KB113 R 0.14KB114 R 0.21KB115 R 0.21KB116 R 0.21KB117 R 0.21KB118 R 0.21KB119 R 0.21KB120 R 0.14KB121 R 0.16KB122 R 0.14KB123 R 0.18KB124 R 0.16KB125 R 0.21KB126 R 0.18KB127 R 0.18KB128 R 0.21KB129 R 0.21KB130 R 0.21KB131 R 0.14KB132 R 0.21KB133 R 0.14KB134 R 0.21KB135 R 0.21KB136 R 0.21KB137 R 0.14KB138 R 0.14KB139 R 0.21KB140 R 0.21KB141 R 0.21KB142 R 0.18KB143 R 0.23KB144 R 0.18KB145 R 0.14KB146 R 0.21KB147 R 0.18KB148 R 0.21KB149 R 0.21KB150 R 0.21KB151 R 0.23KB152 R 0.21KB153 R 0.14KB154 R 0.21KB155 R 0.14KB156 R 0.21KB157 R 0.18KB158 R 0.21KB159 R 0.27KB160 R 0.27KB161 R 0.23KB162 R 0.21KB163 R 0.21KB164 R 0.21KB165 R 0.21KB166 R 0.21KB167 R 0.32KB168 R 0.21KB169 R 0.21

MB025 R 10.21MB027 R 10.21MB028 R 13.17MB029 R 13.83MB031 R 66.69MB032 R 6.22MB033 R 8.90MB034 R 8.03MB048 R 66.69MB049 R 11.63MB056 R 7.80MB057 R 116.96MB058 R 2.46MB059 R 3.93MB060 R 7.82MB061 R 4.65MB062 R 6.16MB076 R 6.77MB081 R 3.77MB083 R 25.14MB084 R 46.90

MB085 R 21.41MB086 R 110.17MB087 R 75.18MB090 R 172.38MB095 R 74.66MB099 R 1.80MB100 R 1.98MB101 R 2.18MB102 R 19.38MB103 R 44.12MB104 R 36.43MB121 R 2.07MB122 R 1.97MB123 R 2.79MB124 R 3.23MB126 R 49.50MB130 R 4.33MB139 R 13.68MB140 R 10.98MB141 R 1.53MB142 R 2.36MB143 R 1.97MB144 R 1.87MB145 R 2.42MB146 R 2.47MB147 R 2.66MB148 R 3.02MB149 R 21.99MB150 R 36.12MB151 R 7.98MB152 R 2.83MB153 R 3.03MB154 R 2.85MB155 R 3.11MB156 R 3.53MB157 R 4.29MB158 R 8.70MB159 R 2.83MB160 R 3.31MB161 R 4.15MB162 R 8.24MB163 R 30.53

NB001 R 2.41NB006 R 3.81NB011 R 4.66NB016 R 5.65NB021 R 7.41NB026 R 9.09NB031 R 10.25NB036 R 13.06

PB004 R 35.00PB005 R 125.71PB007 R 290.85PB019 R 116.96PB020 R 93.43PB021 R 102.19PB022 R 54.09PB024 R 72.98PB026 R 213.67PB028 R 193.00PB030 R 56.43PB031 R 165.70PB032 R 139.18PB034 R 56.03PB035 R 63.44PB037 R 22.24PB041 R 123.84PB042 R 47.60PB046 R 50.13PB048 R 29.65PB049 R 116.71PB050 R 70.03PB056 R 61.56PB086 R 61.56PB098 R 48.75PB099 R 48.75PB101 R 49.25PB102 R 49.56PB107 R 49.25PB112 R 61.06PB115 R 86.50PB119 R 61.06PB120 R 61.06PB124 R 22.04PB125 R 22.04PB126 R 119.48PB127 R 188.37PB128 R 160.36PB129 R 198.12

PB130 R 92.51PB149 R 22.47PB161 R 120.56PB162 R 55.81PB163 R 46.73PB167 R 21.41PB168 R 96.27PB173 R 21.66PB174 R 21.66PB177 R 61.06PB178 R 61.06PB179 R 74.81PB180 R 61.56PB182 R 77.81PB185 R 94.57PB188 R 70.03PB189 R 93.37PB190 R 115.74PB192 R 73.17PB193 R 328.51PB196 R 208.40PB197 R 93.72PB198 R 32.13PB199 R 22.04PB200 R 22.04PB205 R 93.37PB207 R 62.24PB208 R 128.39PB209 R 93.37PB210 R 66.13PB211 R 89.48PB219 R 120.60PB220 R 634.89PB221 R 81.69PB222 R 73.92PB242 R 56.69PB243 R 8.73PB244 R 9.35PB259 R 61.06PB268 R 101.15PB271 R 58.31PB272 R 189.09PB278 R 73.87PB279 R 48.23PB280 R 199.04PB281 R 127.22PB282 R 50.57PB283 R 70.03PB288 R 73.87PB291 R 86.18PB292 R 86.18PB297 R 86.18PB298 R 43.75PB300 R 112.83PB301 R 89.48PB302 R 62.24PB303 R 50.57PB304 R 101.15PB305 R 50.57PB307 R 116.07PB308 R 32.96PB309 R 39.23PB310 R 79.20

QB002 R 254.95QB006 R 142.20QB015 R 101.51QB018 R 86.18QB020 R 73.37QB024 R 44.12QB041 R 56.02QB053 R 9.09QB054 R 9.64QB055 R 36.29QB056 R 14.10QB057 R 14.64QB060 R 61.21QB064 R 318.22QB066 R 9.44QB067 R 86.18QB070 R 70.11QB071 R 71.98QB072 R 84.47QB073 R 95.83QB074 R 17.75QB076 R 30.86QB077 R 37.10

RB004 R 107.01RB007 R 718.93RB008 R 133.38

RB012 R 436.98RB013 R 25.40RB014 R 25.40RB019 R 350.25

SB008 R 9.90SB009 R 3.06SB010 R 57.66SB011 R 63.48SB012 R 57.13SB013 R 58.14SB014 R 62.28SB015 R 63.50SB016 R 63.48SB017 R 63.48SB018 R 63.48SB019 R 62.88SB020 R 193.58SB021 R 136.16SB022 R 106.88SB023 R 201.21SB024 R 105.23SB025 R 25.40SB026 R 25.40SB027 R 31.42SB028 R 31.42SB029 R 44.46SB030 R 44.46SB031 R 104.31SB032 R 50.70SB033 R 107.73SB034 R 82.08SB035 R 107.94SB036 R 90.29SB037 R 44.46SB038 R 31.42SB039 R 31.42SB041 R 406.66SB042 R 44.46SB043 R 118.20SB046 R 190.63

TB001 R 31.33TB004 R 99.32TB016 R 607.94TB018 R 549.86TB021 R 268.13TB022 R 135.43

VB001 R 23.60VB036 R 622.67VB045 R 191.99VB046 R 191.99VB047 R 191.99VB050 R 132.05

XB001 R 20.00XB004 R 146.72XB005 R 189.60XB006 R 202.53XB007 R 229.82XB009 R 64.23XB026 R 107.49XB030 R 337.44XB033 R 94.80XB034 R 193.44

10

FAX: 012 3320487 HOW TO ORDER TEL: 012 3322356 1. Use the order codes that appear in the catalogue to order products 2. Use the price list at the back of the catalogue prices are in Rand and VAT inclusive. (Price subject to change without prior notice) 3. Fax the order form to Electronics123 at 012 3320487

Code Description of Product Quantity Price Total

Add postage and packaging (see Remarks 1 to 3 below) R40/65/55 TOTAL R

REMARKS: 1. Add R40 for postage and packaging in RSA, allow 5-7 days for delivery. 2. Add R65 for postage and packaging all other countries, allow 30 days for delivery. 3. Add R55 for urgent dispatch with Speed Services Courier, parcel is delivered within 2-3 days at your local post office (subject to stock availability). Phone for your parcel tracking number. (Only available in RSA) Name and Surname Telephone Number Client Number (Please complete if known) Delivery Address Postal Code Debit my credit card for R MasterCard Visa Card Holder Name Signature Credit Card Number Last three digit of the number appearing on the reverse of your credit card Expiry Date For bank payment please complete the depositor’s reference on the bank deposit slip with your client number. I have deposited R………………………….…into the following bank account (Gezina Branch):

⃞ABSA (Account 050-298-779) Branch code: (33-41-45) Account name holder: (Electronics123)

catalogue (1)

Documents

audio signal modifiers

waverley pretoria

technology station

audio signal level indicators

signal generators

jaco smiteditor

product codes

new catalogue