catalogue ellers gb
DESCRIPTION
catalogTRANSCRIPT
Par
titi
on
De
sig
ns
Part i t ion Des igns
Harmony
Creativity
Performance
Editorial Content 8 Classical range
10 Cover-trims 11 Breasted wall 12 Lining insulation 12 Lining of door face 13 Workshop cabins
14 Transparent range
16 Edge to edge glazed simple glazing 17 Edge to edge glazed double glazing 18 Cover-trim glazed simple glazing 19 Cover-trim glazed double glazing 20 Recessed joint glazed simple glazing 21 Recessed joint glazed double glazing
22 Elegant range
24 Recessed joint partitions with labeled finishings 24 Recessed joint partitions clipped edge to edge 25 Bracket panels
26 Doors
28 Full height wooden doors 28 Wooden doors with transom 29 Aluminum frame doors simple glazing 29 Aluminum frame doors double glazing 30 Clarit doors 31 Sliding doors
32 Accessories
34 Bracer finishing for recessed joint partition 34 Shelf support 35 Acoustic technical coving 35 Picture hooks
36 From designing to manufacturing
38 As regards the environment, ELLERS is committed
40 Technicalspecifications
The ELLERS partitions range has been designed with complementary elements to match. From an aesthetic point of view, the eye naturally focuses on the width, height and door frame dimensions. Therefore, it forms a coherent, harmonious and compatible set.
Assembling partitions together is a decisive factor when it comes to assessing the final quality. For this reason, the designers of ELLERS partitions have developed an innovative system that uses mechanized pressure when assembling partitions. This system, subsidized by OSEO-Innovation, is applied to the entire ELLERS range and ensures a fast and accurate fitting without equal.
Each partition installation has its own specification, that is why the ELLERS range has been designed to meet a variety of needs. Thus, the same profile can be varied according to the unique height, acoustic insulation, balustrade and removal expectations of your office space.
Selectingyour partitionsQuestions you should ask yourself
Should my partitions have good noise insulation capability?
The level of noise which can be heard through partitions largely depends on the type of partition used. The ELLERS range offers a large variety of acoustic qualities which meet your needs even in uncomfortable conditions.Acoustic insulation is a key criterion to consider when selecting your partitions, even perhaps more important than that of transparency.
All the acoustic capacities have been measured by a specialized independent body.
This removable characteristic received technical certification from the CEBTP.
In an ever changing world, office space must change with developments in the company.The ELLERS range has been designed to be removable and reusable according to company office space developments.
Howoftenwillmyofficespacebemodified?
Will partitions be higher than the standard heights?
The ELLERS range includes profiles which enable jobs to be undertaken at height. Modern architecture imposes rigidity, height and modulation restrictions, each of which the ELLERS range is able to fulfill.All partition installation set-ups can be undertaken.Reinforced profiles guarantee absolute solidity of the installation.
Reinforced profiles undergo exhaustive laboratory testing. Safety is certified by CEBTP testing.
The ELLERS range also integrates constraints linked to the installation of partitions situated above the open space (mezzanine, staircases, etc.). Resistance to shocks and horizontal pressure was integrated when designing the rangein order to guarantee complete safety to occupants of the partitioned spaces.
Do I need balustrade partitions?
Classicalrange
Far from simply being trendy or fashionable, the classical range represents the appropriate compromise between technical performance, ease of installation and cost.
Essentially composed of covered panels attached with aluminum cover-trims, this range can also accommodate glazed elements ensuring maximum light to penetrate.
The balance between glass, full panels and aluminum framing helps to obtain the best overall value for money.
10 11
clas
sica
l
clas
sica
l
Cover-trims
The foremost name in office partitions, the cover-trim range meets the requirements of the most frequently used partitioning product.
Traditional decorations such as mineral or glass wool for insulation and covered plaster panels for fillings create a technical combination largely tested with good value for money.
The foremost names in covered industrial plaster now have more and more sophisticated ranges. The use of these materials are no longer synonymous with monotony and second rate design.
The use of these standard filling products facilitates their reuse and the possible maintenance of these partitions.
The use of high density fillings helps to obtain high performance acoustic insulation values.
Possibility of controlling the height of the wall, and matching it with furnishings and workstations.
Breasted wall
From the example of full height partitions, breasted wall partitions represent another aspect of traditional partitions.
With identical design, they however enable light to penetrate between the partitioned spaces while reducing glass surfaces (cost reduction).
Used while adjusting the height of the walls, these partitions can be used as an off-beat means of decoration.
Possibility of improving acoustic quality by using double glazing.
Possibility of using integrated blinds in order to partially or totally obscure the open outlook effect.
12 13
clas
sica
l
clas
sica
l
Door-face double
Designers of the ELLERS range have created profiles helping to decorate walls while adding thermal insulation elements.
When walls are to be decorated without adding additional thermal insulation, the doubling of door-face profiles is the appropriate technical solution to be used.
profiles
Possibility of treating window frames so as to complement the remainder of the doublings.
Removable modules facilitate dismantling.
Aesthetic harmony between decorated walls and partitions.
insulation
Quick doubling with the use of mechanical locking patented systems.
Possibility of producing full height cabins with reinforced profiles.
Workshop cabins
Profiles can additionally be used on self supporting structures such as workstation desks, including suspended ceilings and/or technical floors. Within an industrial or laboratory environment, these cabins also meet all the required specifications.
Possibility of creating mezzanine type workshop cabins with balustrade profiles.
Transparent range
Today it is essential for professional interior designers to use transparent partitions. They represent a range in their own right thanks to the many variations in terms of frames surrounding the one key element: glass.
So as to meet cost, aesthetic or even acoustic insulation requirements, the ELLERS range has been enriched with a host of different profiles which help to meet any kind of requests.
Connections with other ELLERS ranges are possible, allowing you to create the boldest of combinations.
16 17
tran
spar
ent
tran
spar
ent
Edge to edge glazedDouble glazing
From the edge to edge partition simple glazing, this range corrects the main defect that can be found in the first product : a low acoustic value.
While maintaining its maximum transparent qualities, this double glazing partition additionally has very high acoustic qualities which help to facilitate its use in offices.
Edge to edge glazedSimple glazing
The simple edge to edge glazing partition uses aluminum profiles on the sides.
This has become a standard reference in the market today due to architect demands ; this range is ideal for those looking for complete transparency without acoustic performance constraints.
Possibility of using glass between 8 mm to 15 mm, meeting applicable glass safety standards.
Milimetric adjustment of glass positions with the use of wedges which enables a rapid and efficient installation (patented system).
18 19
tran
spar
ent
tran
spar
ent
Cover-trim glazed Double glazing
Due to its design, the cover trim with double glazing partition is the most acoustic.Just like the simple glazing partition, glass stops help to use glass from 5 mm to 44/2.
This double glazing partition also enables to integrate pocket doors, which facilitates the use of space and increases the aesthetic nature of the whole unit.
This partition enables to integrate blinds with blades on show.
Cover-trim glazed Simple glazing
The very first full height glazed partition wall is one of the simplest to install.Having very good acoustic values, it is often associated with completely full height modules in order to create light columns.
The use of completely interchangeable profiles helps to transform the partition into double glazing or full height partition in no time.
The ease of installation as well as the use of a single glass makes it economically interesting...
20 21
tran
spar
ent
tran
spar
ent
Glazed recessed joint Double glazing
The recessed joint double glazing partition is the most suitable so long as one has to associate acoustic and “light” aluminum.
Possibility of inserting blinds between glazing thus giving volume to the partition and providing it with dynamic qualities.
Glazed recessed joint Simple glazing
The recessed joint transparent range is a link between the complete edge to edge partition and that of the more traditional with aluminum cover-trims.
It allows glass to be fitted flush while ensuring the glass does not move from its position.
Brushed stainless steel finishing labels help to create regular intervals between glasses and create a better finishing level of the unit.
Labels can be replaced with accessories such as shelf doors which provide shelves on glazed partitions with neither glue nor drilling.
Elegant
range
In addition to the primary role of creating space, partitions can also be used to offer a high-level of aesthetics in the workplace.
Technological developments, especially in terms of fillings, have helped to obtain variations which meet the requirements of those occupying the space.
24 25
eleg
ant
eleg
ant
Decoration panels
Fitted wooden panels provide partitions a high level of aesthetics. Thanks to this technique, the aluminum is practically invisible, in favour of wood which brings out all the nobility of this material.
This finishing can be made on a surface or on both sides using the same frame as in all the other ranges, thus bringing all the necessary modular functions to the fittings.
Very high acoustic qualities, easy to fix (decorate). Possibility of performing custom-made decoration according to the choice of colours and graining of the wood.
These labels can be replaced by other accessories such as shelf doors. In this layout, the shelf installation is performed immediately and provides value to partition finishing (no drilling).
Thanks to a very high level of acoustic performance, decoration panels perfectly suit to management offices or meeting rooms.
Using stainless steel labels on a base of 3 for 2.50 m of height gives a refined and linear appearance.
Recessed joint partitions
Recessed joint partitions help to hide the cover-trim, consequently the eye focuses on the brushed stainless steel label finishings.Only the top and bottom portions (smooth) allow the aluminum to appear.
Contrary to wooden decorated panels, edge to edge clipped panels allow for smoothness on the top and the base which shows that aluminum elements can constitute a coherent element of design in office units.They are in perfect line with the sobriety and minimalist objective: absence of cover-trims and finishing labels.
with finishing labels
clipped edge to edge
Doors
Very often considered as a standard product, doors help to increase the level of the desired finishing.
Many of the ranges on offer are suitable for the classical, transparent or elegant ranges, and these help to propose custom-made products.
The performance of door frames as well as the mechanical parts both determine the quality of doors and also the level of finishing of the unit.
All mechanical systems installed by the ELLERS’ team were tested over approximately 60.000 opening/closing cycles.
An adjustable patented system helps to ensure the complete closing of the doors which is a proof of quality.
28 29
door
s
door
s Aluminum frame doors
Assembled in our workshops, they are ready to be installed when delivered.
Aluminum doors offer a large variety of dimensions
Available in opening or sliding versions.
Manufactured in our workshops, aluminum door frames are custom-made according to the dimension you require.Aluminum door frames offer the advantage of using aluminum profiles with the same colour as partitions and door frames.
Double glazing aluminum frame doors are custom-made and guarantee the best level of acoustic qualities.Manufactured with top quality glass, they provide perfect harmony with partitions and an impression of linearity.
simple glazing
double glazing
Exists in opening or sliding versions.
Possibility of matching door finishing with that of partition panels.
Full height wooden doors
The full height wooden door constitutes an office design element.
At a slightly higher cost, they help to avoid the production of a transom and provide a sensation of volume to rooms.
Considered as traditional, the transom helps to integrate traditional door dimensions, thus provide economic advantages.
full height
with transom
A large range of stainless steel handles for elegant office units
30 31
door
s
door
s
doors
Sliding doors
Available in glazed, wooden or aluminum versions, sliding doors are sometimes used to separate two working spaces while providing a dynamic side to the opening/closing aspect.
Optimization of spaces by having door spacious zones reserved for furnishings.
Clarit doors
Clarit doors meet the highest requirements in terms of transparency, with however slightly reduced acoustic qualities.
The use of locks without advancement of the sliding bolt thus guarantees a perfect plating of the door against the door frame.
These doors are totally invisible and reinforce the transparent effect.
Accessories
ELLERS development teams have established simple accessories which help to complete or customize partitions.
In line with traditional assembly and creativity, accessories have many advantages which enable office development and a favourable office environment.
34 35
On the high wall rails, we can see a hook which enables pictures to be hung easily.These hooks can be fixed or removed by the user, moved at will and used for pictures or any other uses (coat hangers, etc.).This accessory can additionally be installed on decoration panels (Elegant range).In all instances, no drilling or screws are required.
Technical plinths are essentially decorative plastic plinths, which help to reduce the aesthetic beauty of offices. In other cases, these plinths are integrated in partitions but they reduce the acoustic qualities of the whole unit.The ELLERS team has designed a double housing technical plinth which enables electric conductivity of 220 v, as well as Internet and telephone connections. The center of this plinth is made of a high performance acoustic insulation, guaranteeing the non-transmission of sounds from one room to the other.Totally integrated in the partition framework, these plinths can also be used vertically or horizontally.
Acoustic technical plinth with low and high current
Picture hooks
When the standard flat cover-trim is replaced by a recessed cover-trim, it is possible to add a finishing touch to the unit thanks to a band which can be supplied in any desired colours. This accessory is frequently used in the case of balustrades and requires screwing cover-trim joints and easily hides the screw.
It is possible to install a shelf by using a bracket system integrated into the frame. The two installed angle brackets help to support a loaded shelf, as the weight is thus supported by the frame of the partition.These angle brackets are fitted without boring and can easily be removed or moved.
Finishing band for recessed joint partitions
Shelf support
3736
from designing to manufacturing
Our products are subject to strict production monitoring within a production factory of 6000 m2. Our company is committed in a responsible manner regarding its production team : it has notably reached an agreement with Carsat*, a joiner’s ergonomic workshop in order to facilitate maintenance procedures and protect workers from wood dust.
* Carsat: Caisse d’Assurance Retraite et de la Santé Au Travail** Centre Scientifique et Technique du Bâtiment
Our Research and Development service regularly develops new products, systematically tested then validated by official organisms (Carsat*, CSTB**). Our R & D department favours a continuous evolution of our ranges. It listens to the market, responds to new environmental standards and even anticipates them.
Assembly workshop, a perfect manner of monitoring production
Research and Development: innovation and quality
Our design department analyzes your needs and helps you make the most of your space to get the best results. Thanks to our teams' high level of experience, their skills and reliability, we can guarantee you the best service (custom-made study, quotation, assembly) and propose you custom-made solutions if necessary.
Design offices: for custom-made solutions
39
Aluminum spinners of the ELLERS range were given to extruders located in the Euro zone and mainly in Portugal and Switzerland. These choices meet quality requirements but also aims at reducing transportation when supplying the main stocks of Lyon.
Referenced extruders integrate a re-melting aluminum chain that helps to optimize waste on site.
The Lyon-based factory has installed an aluminum chipping recovery system when cutting profiles before sending them to the construction site.During the supply of uncut bars, the “factory departure” supply procedure is favoured thereby reducing transport to the barest minimum.Supplying in 6m, 3m or custom-made bars is also possible. It avoids unnecessary transportation and excessive use of tools during refurbishment of office work.
Logistics
Aluminum is a recyclable product. Designers of the ELLERS range have optimized the recyclability of profiles all along the production chain.
Overall environmental impact also concerns material transportation. Logistics networks have thus been adapted in order to reduce energy balance and their consequences to the barest minimum.
Aluminum has an excellent level of recyclability thanks to a re-melting process. The process is ecological because it avoids the electrolysis process which is very polluting.Compared to extraction from the bauxite mineral, recycling requires 95 % less energy and a ton of recycled aluminum helps to save four tons of bauxite.
Some characteristics of aluminum :• Aluminum is continuously recyclable. • Close to 35 % of the world aluminum demand is satisfied
by recycled aluminum from second fusion.• The production of aluminum from the second fusion requires
only 5% of the electricity needed for the first fusion. • The aluminum industry has reduced the intensity of its
emissions of GES by more than 50% since 1990.
Recycling
The environmentELLERS is committed
Technical specifications
42 43
Framing
Overall width measurement (in mm) 81 81 56 20 81 35 81 81 81 81 81 81 81 From 100 to 121
Wall rail height 35 35 35 35 35 35 35 35 35 35 35 35 35 35Width of cover trim 35 35 35 35 35 - - 35 35 - - - - -
Fillings
Glass thickness from 5 mm to 44/2 • •Glass thickness from 5 mm to 44/2 flat polished joint •Glass thickness from 8 mm to 15 mm flat polished joint • •Panel BF13 raw or covered • • • • • • •Melamined panel 12 mm • • • • • • •Melamined panel 19 mm • • • • • • •Accessories
Finishing band • • • • • • •Double and simple technical plinth • • • • • • • • • • • •Picture hook • • • • • • •Shelf support • • • •Coating
White RAL 9010 All profile ranges are in stock only in this colour.
Sandblasted bronze All profile ranges are in stock only in this colour.
RAL colourings All profile ranges can be supplied within 7 working days in RAL colours.
Special colourings All profile ranges can be supplied within 11 working days in special colours.
Balustrades Option Option Option
Cove
r-trim
Glaz
ed b
reas
ted
wal
l
Doub
le in
sula
tion
Doub
ling
of th
e do
or fa
ce
Wor
ksho
p ca
bin
Edge
to e
dge
sim
ple
glaz
ing
Edge
to e
dge
doub
le g
lazi
ng
Cove
r-trim
sim
ple
glaz
ing
Cove
r-trim
dou
ble
glaz
ing
Rece
ssed
join
t sim
ple
glaz
ing
Rece
ssed
join
t dou
ble
glaz
ing
Rece
ssed
join
t fini
shin
g la
bels
Re
cess
ed jo
int c
lippe
d ed
ge
to e
dge
Deco
ratio
n pa
nel
Technical specifications
44 45
Acoustic specifications
E80 Partition range with joint covers Fillings Rw* (C;Ctr) Ra**= Rw+C
Double glazed partitions with apron 2xBF 13 plasterboards with 45mm glass wool - 1x6mm + 1x8mm glazed panels 41 (-2;-6) 39
Full height double glazed partition 1x8mm + 1x44/2 glazed panels 42 (-2;-4) 40
Full height double glazed partition 2x44/2 silent glazed panels 46 (-2;-6) 44
Solid full height partition 2 fermacel BF 13 plasterboards with 45mm glass wool 46 (-3;-5) 43
Solid full height partition 2 BF 13 plasterboards with 45mm glass wool 42 (-3;-10) 39
Solid full height partition 2 BF 13 phonic plasterboards with 45mm glass wool 48 (-5;-13) 43
PSolid full height partition 2 reinforced BF 13 phonic plasterboards with 45mm glass wool 50 (-5;-13) 45
Solid full height partition 2 rey solution BF 13 plasterboards with 45mm glass wool 39 (-3;-10) 36
Solid full height partition 2 BF 13 plasterboards with 45mm polyester insulation 39 (-3;-10) 36
Solid full height partition on a double-sided electrical profile
2 BF 13 plasterboards with 45mm glass wool 40 (-3;-9) 37
E80 Partition range with clips
Full height double glazed partition with clips 1x8mm + 1x44/2 glazed panels 38 (-1;-2) 37
Solid full height partition with clips 2x12mm melamine chipboards with 45mm glass wool 42 (-5;-12) 37
E80 Frameless partition range
Frameless double glazed partition 2 x12mm tempered glazed panels 42 (-5;-7) 37
Full height frameless partition 2x12mm melamine chipboards with 45mm glass wool 44 (-4;-11) 40
E35 Frameless partirion range
Single glazed frameless partition 2 x12mm tempered glazed panels 32 (-2;-3) 30
E100/120 Range with hanging panelsSolid full height with hanging panels 2x19mm laminated chipboards
with 45mm glass wool 45 (-2;-7) 43
Solid full height with hanging panels 2 reinforced 19mm laminated chipboards with 45mm glass wool 47 (-3;-8) 44
Solid full height with hanging panels 1x19mm laminated chipboard + 1 BF 13plasterboard with 45mm glass wool 44 (-4;-10) 40
Doors
Full height door with transom Prehung laminated door, MAGRI range 32 (-1;-4) 31
Full height door with transom Acoustic laminated prehung door with amovible plinth, MAGRI range 34 (-0;-4) 34
Reminder: Acoustic insulation is aimed at diminishing sound energy. It is rated with RW.
*Rw (C;Ctr)This index is not often used because it is considered as irrelevant. C and Ctr indexes were implemented when the new European norm was created. This measure is expressed with DB and rates the ability to soundproof a product or a material. The higher RW is., the more insulating the material is. We make a difference between white noise (road traffic, trains) rated with Ctr and pink noise (conversation, music, TV) rated with C.
**Ra= Rw+CDB, which used to be Rrose (dB(A)), is the new European standard to rate acoustic insulation.
47
Occasional horizontal loads 50 daNResidual deformation < 3 mm
CERFF is an association that helps to check the quality of partitions and mobile walls. It guarantees approved products with a reorganized referential and laboratory test. www.cerffassociation.org
1 – Assembling and dismantling 4 - Endurance
2 – Stability to use safety shock and durability
5 – Acoustic fading
3 – Stability to horizontal push Option: Stability with vertical loads
CERFF Certified
Demountability and removability Cycles open/close at 60 000 cycles Optional: + 40 000 cycles (which is: 100 000 cycles)
Shocks of 50 kg soft material Shocks of 1 kg hard material
The whole partition : 39 dBFull height glazed partitions : 38 dBFull partitions with prehung door unit : 30 dB
Vertical pressure
ELLE
RS,
a ra
nge
of IN
SEO
Gro
upe
- Pa
rc d
’act
ivité
s de
Ser
men
az -
287
1, a
venu
e de
l’Eu
rope
- 6
9140
Rill
ieux
-la-P
ape
- 04
37
45 1
3 40
© C
omm
uniq
uez
– ph
oto
cred
its :
Sim
on L
ogea
is -
Gill
es D
esm
ier -
Bru
ynze
el -
Fot
olia
- O
ctob
er 2
010
The whole list of ELLERS’ partners are on our website