catalogue lv 07

96

Upload: api-3815405

Post on 14-Nov-2014

524 views

Category:

Documents


87 download

DESCRIPTION

LV Cable Catalogue

TRANSCRIPT

Page 1: Catalogue LV 07
Page 2: Catalogue LV 07

Head Office/Factory :Jl. Gatot Subroto Km 7,8 Kel Pasir Jaya, Kec. Jati Uwung, Tangerang 15135-IndonesiaPhone : (62-21) 5922404, 5928066 (Hunting) Fax. : (62-21) 59301979, 5922576, 5901469

c Copyright Sumi Indo Kabel 2007

All rights reserved. This catalogue is the copyright work of PT. Sumi Indo Kabel Tbk. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,in any form or by means, electronic, mechanical, photocopying, recording or otherwise, without prior permission of PT. Sumi Indo Kabel.

All information contained in this catalogue is believed to be accurate at the time issue. PT. Sumi Indo Kabel reserve the right to change information or specification at any timein the light of technical developments or revisions.

Issue : Second Date: September '07

Page 3: Catalogue LV 07

Section 1 - Contents & Information

Low Voltage Catalogue Index Page Number

SECTION 1 - Contents & InformationIndex Page 1

Company Profile of PT. SUMI INDO KABEL Tbk 2

Cable Specification 3

SECTION 2 - PVC Insulated CablesUnarmoured Cables

450/750 Volts PVC Insulated Cables (Cu/PVC, NYA) 5

450/750 Volts PVC Insulated Cables (Flexible Cu/PVC, NYAF) 6

300/500 Volts PVC Insulated and PVC Sheathed Cables (PVC/PVC, NYM) 8

300/500 Volts PVC Insulated and PVC Sheathed Cables (Flexible PVC/PVC, NYMHY) 10

450/750 Volts PVC Insulated and PVC Sheathed Cables (Flexible PVC/PVC, NYYHY) 11

600/1000 Volts PVC Insulated and PVC Sheathed Cables (PVC/PVC, NYY) 18

600/1000 Volts PVC Insulated, Copper Tape Shielded and PVC Sheathed Cables (PVC/PVC-S, NYSY) 30

Armoured Cables

600/1000 Volts PVC Insulated, Steel Wire Armoured and PVC Sheathed Cables (PVC/SWA/PVC, NYRY) 35

600/1000 Volts PVC Insulated, Flat Steel Wire Armoured and PVC Sheathed Cables (PVC/FSWA/PVC, NYFGbY) 41

600/1000 Volts PVC Insulated, Double Steel Tape Armoured and PVC Sheathed Cables (PVC/DSTA/PVC, NYBY) 46

SECTION 3 - XLPE Insulated CablesUnarmoured Cables

600/1000 Volts XLPE Insulated and PVC Sheathed Cables (XLPE/PVC, N2XY) 52

600/1000 Volts XLPE Insulated, Copper Tape Shielded and PVC Sheathed Cables (XLPE/PVC-S, N2XSY) 62

Armoured Cables

600/1000 Volts XLPE Insulated, Steel Wire Armoured and PVC Sheathed Cables (XLPE/SWA/PVC, N2XRY) 67

600/1000 Volts XLPE Insulated, Flat Steel Wire Armoured and PVC Sheathed Cables (XLPE/FSWA/PVC, N2XFGbY) 73

600/1000 Volts XLPE Insulated, Double Steel Tape Armoured and PVC Sheathed Cables (XLPE/DSTA/PVC, N2XBY) 78

SECTION 4 - General InformationCurrent Carrying Capacity for XLPE Insulated cable (single core) 83

Current Carrying Capacity for XLPE Insulated cable (multicore) 84

Current Carrying Capacity for PVC Insulated cable (single core) 85

Current Carrying Capacity for PVC Insulated cable (multicore) 86

Correction factor of Curent carrying capacity 87Cable arrangement for Installation purpose 88Explanation of Flame Retardant / Fire Resistant Characteristic 91

Page - 1

Page 4: Catalogue LV 07

Section 1 - Contents & Information

Page - 2

1

Company Profile of PT. Sumi Indo Kabel Tbk

The Company was established on July 23, 1981 with its Head Officeand Factory located in Tangerang, Banten. The Company is engaged in the manufacturing of Power Cable, Telecommunication Cable &Fiber Optic, and Copper Wire.

The Company was listed in the Jakarta and Surabaya Stock Exchangesin 1990. The Company became Foreign Capital Investment (PMA)in 1994, with the participation of Sumitomo Electric Industries, Ltd.,Japan, one of the biggest in cable and wire industries in the world. Thename of Company became PT Sumi Indo Kabel Tbk. since 1999.

The Company received official recognition of its quality managementsystem standard from SGS, certification ISO 9001 : 2000 for its PowerCable & Control Cable, Telephone Cable & Fiber Optic Cable, andCopper Wire Rod in 2002. This was the first recognition in Indonesiafor Electric Cable and Wire industries.

Page 5: Catalogue LV 07

Section 1 - Contents & Information

1 Scope

2 Conductor

The conductor shall be solid, circular stranded or compacted stranded.

3 Insulation

4 Identification of cores

Number of core Identification of coresSingle core Black (Natural for XLPE insulated)Two cores Red, BlackThree cores Red, Yellow, BlueFour cores Red, Yellow, Blue, BlackFive core or more Black insulation with white numbered code.

5 Cabling and filling

6 Metallic Shielding (if required)The metallic shielding shall consist of either one or more Copper tapes or a concentric layer of copper wires.

7 Inner sheath (armour cable only).

8 Metallic armour

9 Outer sheathThe outer sheath shall consist of a thermoplastic compound such as polyvinyl chloride (PVC),polyethylene (PE), halogen free (LSOH), etc in accordance with IEC 60502-1.

Page - 3

The cores of all cables shall be identified by color or numbered printed on the surface of insulationin accordance with the following sequence or other sequence.

The multi cores shall be laid up together with suitable filler to give the completed cable asubstantially circular cross section and bound with suitable binder tape.

The inner sheath shall consist of extruded thermoplastic compound such as :polyvinyl chloride(PVC), polyethylene (PE),halogen free (LSOH), etc in accordance to IEC 60502-1.

The metallic armour shall consist of single layer of round galvanized steel wire or flat galvanizedsteel wire and steel tape or double layer of galvanized steel tapes in accordance to IEC 60502-1.The armour of single core cables shall consist of single layer of aluminium wire or double layers ofaluminium tape as non magnetic material.

Cable Specification

These specification apply to material and constructions of cross-linked thermosetting polyethylene(XLPE) or Polivinyl chloride (PVC) insulated wire and cables for rated voltages 0.3/0.5 kV up to0.6/1(1.2) kV accordance to IEC 60502-1, Indonesia Electric Power Company (SPLN)

The conductor shall be formed from plain annealed copper or aluminium complying with IEC60228, ASTM B3 and B8.

The insulation shall be cross-linked polyethylene (XLPE) or Polivinyl chloride (PVC) in accordanceto IEC 60502-1.

Page 6: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

450/750 V PVC INSULATED WIRE (Cu/PVC)acc. to IEC 60227

Copper Conductor (Solid) PVC Insulation

Copper Conductor (Stranded) PVC Insulation

Colour of Insulation : Red, White, Black, Green, Brown, Blue, Yellow, Green-yellow

450/750 V PVC INSULATED WIRE (Cu/PVC Flexible)acc. to IEC 60227

Copper Conductor (Flexible) PVC Insulation

Colour of Insulation : Red, White, Black, Green, Brown, Blue, Yellow, Green-yellow

Page - 4

Note : Special application upon request* Available product in accordance to : SPLN or other requirement.* Tin coated Copper conductor.

Page 7: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 450/750 V

Insulation : PVC Compound type C Operating Temperature

Colour Ident. : Red, White, Black, Green, Maximum 70°C

Blue, Yellow, Green-yellow

1.5 1 / 1.38 1.38 0.7 3.0 22 12.1 0.011 2500

1.5 7 / 0.52 1.56 0.7 3.5 23 12.1 0.010 2500

2.5 1 / 1.78 1.78 0.8 4.0 33 7.41 0.010 2500

2.5 7 / 0.67 2.01 0.8 4.0 35 7.41 0.009 2500

4 1 / 2.26 2.26 0.8 4.5 49 4.61 0.0085 2500

4 7 / 0.85 2.55 0.8 4.5 52 4.61 0.0077 2500

6 1 / 2.77 2.77 0.8 5.0 69 3.08 0.0070 2500

6 7 / 1.04 3.12 0.8 5.0 72 3.08 0.0065 2500

10 1 / 3.57 3.57 1.0 6.0 113 1.83 0.0070 2500

10 7 / 1.35 4.05 1.0 6.5 119 1.83 0.0065 2500

16 7 / 1.70 5.10 1.0 7.5 179 1.15 0.0050 2500

25 7 / 2.13 6.39 1.2 9.0 277 0.727 0.0050 2500

35 7 / 2.52 7.56 1.2 10.5 377 0.524 0.0040 2500

50 19 / 1.83 9.15 1.4 12.5 530 0.387 0.0045 2500

70 19 / 2.17 10.85 1.4 14.0 727 0.268 0.0035 2500

95 19 / 2.52 12.60 1.6 16.5 985 0.193 0.0035 2500

120 37 / 2.03 14.21 1.6 18.0 1218 0.153 0.0032 2500

150 37 / 2.27 15.89 1.8 20.0 1522 0.124 0.0032 2500

185 37 / 2.52 17.64 2.0 22.0 1873 0.0991 0.0032 2500

240 61 / 2.26 20.34 2.2 25.5 2465 0.0754 0.0032 2500

300 61 / 2.52 22.68 2.4 28.0 3055 0.0601 0.0030 2500

400 61 / 2.86 25.74 2.6 31.5 3927 0.0470 0.0028 2500

Page - 5

V/5 min

Maximum AC

Test

Voltage

Minimum

Insulation

MΩ.km

Thickness

Nominal

Resistance Resistance

wire

Conductor

of

Nominal No./

Diameter

area (approx.)

Cross-

Diameter

of wire

(approx.)

Conductorsection

mm²

(Approx.)

Insulation

Weight

Nominal

Overall

(Approx.)

No./mm Ω/kmkg/kmmmmm mm

450/750 V PVC INSULATED WIRECU/PVC (IEC 60227)

Conductor

at 70°Cat 20°C

of Diameter of

Page 8: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type C Operating Temperature

Colour Ident. : Red, White, Black, Green, Maximum 70°C

Blue, Yellow, Green-yellow

1.5 1.58 0.7 3.5 22 13.30 0.010 2500

2.5 0.26 2.04 0.8 4.0 34 7.98 0.009 2500

4 0.31 2.59 0.8 4.5 50 4.95 0.007 2500

6 0.31 3.46 0.8 5.5 75 3.30 0.006 2500

10 0.41 4.62 1.0 7.0 130 1.91 0.0056 2500

16 0.41 5.66 1.0 8.0 186 1.21 0.0046 2500

25 0.41 7.06 1.2 10.0 286 0.78 0.0044 2500

35 0.41 8.43 1.2 11.0 395 0.554 0.0038 2500

50 0.41 10.07 1.4 13.5 550 0.386 0.0037 2500

70 0.51 11.97 1.4 15.0 760 0.272 0.0032 2500

95 0.51 13.73 1.6 17.5 1008 0.206 0.0032 2500

120 0.51 15.53 1.6 19.5 1270 0.161 0.0029 2500

150 0.51 17.56 1.8 22.0 1605 0.129 0.0029 2500

185 0.51 19.16 2.0 24.0 1914 0.106 0.0029 2500

240 0.51 22.0 2.2 27.0 2491 0.0801 0.0028 2500

Page - 6

Maximum MinimumNominal Nominal

Thickness Overall

section Conductor

Nominal Diameter Insulation

Cross- of of Diameter of Resistance Resistance

Weight Conductor

mm² mm

0.26

at 70°C

area (Approx.) (Approx.)(approx.)

mm mm kg/km Ω/km

(approx.)

Insulation wire at 20°C

mm V/5 minMΩ.km

Conductor AC

Maximum Test

Diameter Voltage

of wire

450/750 V PVC INSULATED WIRECU/PVC-Flexible (IEC 60227)

Page 9: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (NYM) - IEC 60227 , SPLN 42-2

Conductor PVC Inner coveringPVC Insulation PVC Sheath

300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (NYMHY) - IEC 60227 , SPLN 42-2

ConductorPVC Insulation PVC Sheath

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

Tape (manufacturer's option)Conductor PVC Sheath

PVC InsulationFiller (Polyprophylene yarn,or extruded filler up to request)

Page - 7

Page 10: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 and 2) Uo/U - 300/500 V

Insulation : PVC Compound Operating Temperature

Inner covering : PVC Compound Maximum 70°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation : Two cores - Red,Black

Three cores - Red,Yellow, Blue

Sheath - White

TWO AND THREE CORES

No.

of

Core

-

1.5 1 / 1.38 1.38 0.7 0.4 1.2 9.5 129 12.1

7 / 0.52 1.56 0.7 0.4 1.2 10.0 138 12.1

2.5 1 / 1.78 1.78 0.8 0.4 1.2 11.0 173 7.41

7 / 0.67 2.01 0.8 0.4 1.2 11.0 184 7.41

4 1 / 2.26 2.26 0.8 0.4 1.2 12.0 222 4.61

2 7 / 0.85 2.55 0.8 0.4 1.2 12.5 239 4.61

6 1 / 2.77 2.77 0.8 0.4 1.2 13.0 294 3.08

7 / 1.04 3.12 0.8 0.4 1.2 14.0 313 3.08

10 1 / 3.57 3.57 1.0 0.6 1.4 16.0 453 1.83

7 / 1.35 4.05 1.0 0.6 1.4 17.0 492 1.83

16 7 / 1.70 5.10 1.0 0.6 1.4 19.0 668 1.15

25 7 / 2.13 6.39 1.2 0.8 1.4 23.0 998 0.727

35 7 / 2.52 7.56 1.2 1.0 1.6 26.0 1336 0.524

1.5 1 / 1.38 1.38 0.7 0.4 1.2 10.0 150 12.1

7 / 0.52 1.56 0.7 0.4 1.2 10.5 159 12.1

2.5 1 / 1.78 1.78 0.8 0.4 1.2 11.5 205 7.41

7 / 0.67 2.01 0.8 0.4 1.2 12.0 216 7.41

4 1 / 2.26 2.26 0.8 0.4 1.2 12.5 266 4.61

3 7 / 0.85 2.55 0.8 0.4 1.2 13.0 286 4.61

6 1 / 2.77 2.77 0.8 0.4 1.4 14.0 357 3.08

7 / 1.04 3.12 0.8 0.4 1.4 14.5 381 3.08

10 1 / 3.57 3.57 1.0 0.6 1.4 17.0 557 1.83

7 / 1.35 4.05 1.0 0.6 1.4 18.0 600 1.83

16 7 / 1.70 5.10 1.0 0.8 1.4 20.5 849 1.15

25 7 / 2.13 6.39 1.2 0.8 1.6 24.5 1270 0.727

35 7 / 2.52 7.56 1.2 1.0 1.6 27.5 1679 0.524

Conductor Nominal Nominal

Ω/km

Resistance

Thickness

Sheath

Weightdiameter

cable cable

of of

section

Overall Maximum

Nominal No./ Diameter Thickness

at 20°C

Conductor

Cross- Diameter of of

(approx.) (approx.)

mm kg/kmmm

300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (NYM) - IEC 60227 , SPLN 42-2

of wire Conductor Insulation

(approx.)

of

mm² No./mm

Thickness

of Inner

covering

(approx.)

mm mm

(approx.)

mm

area

Page - 8

Page 11: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 and 2) Uo/U - 300/500 V

Insulation : PVC Compound Operating Temperature

Inner covering : PVC Compound Maximum 70°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation : Four core - Red,Yellow, Blue, Black

Five core - Black with numbering code

Sheath - White

FOUR AND FIVE CORES

No.

of

Core

-

1.5 1 / 1.38 1.38 0.7 0.4 1.2 11.0 177 12.1

7 / 0.52 1.56 0.7 0.4 1.2 11.5 189 12.1

2.5 1 / 1.78 1.78 0.8 0.4 1.2 12.5 247 7.41

7 / 0.67 2.01 0.8 0.4 1.2 13.0 262 7.41

4 1 / 2.26 2.26 0.8 0.4 1.4 14.0 340 4.61

4 7 / 0.85 2.55 0.8 0.4 1.4 14.5 361 4.61

6 1 / 2.77 2.77 0.8 0.4 1.4 15.5 456 3.08

7 / 1.04 3.12 0.8 0.4 1.4 16.0 482 3.08

10 1 / 3.57 3.57 1.0 0.6 1.4 18.5 690 1.83

7 / 1.35 4.05 1.0 0.6 1.4 19.5 742 1.83

16 7 / 1.70 5.10 1.0 0.8 1.4 22.5 1059 1.15

25 7 / 2.13 6.39 1.2 1.0 1.6 27.5 1616 0.727

35 7 / 2.52 7.56 1.2 1.0 1.6 30.0 2107 0.524

1.5 1 / 1.38 1.38 0.7 0.4 1.2 11.5 210 12.1

7 / 0.52 1.56 0.7 0.4 1.2 12.0 223 12.1

2.5 1 / 1.78 1.78 0.8 0.4 1.2 13.5 293 7.41

7 / 0.67 2.01 0.8 0.4 1.2 14.0 313 7.41

4 1 / 2.26 2.26 0.8 0.6 1.4 15.5 424 4.61

5 7 / 0.85 2.55 0.8 0.6 1.4 16.5 452 4.61

6 1 / 2.77 2.77 0.8 0.6 1.4 17.0 548 3.08

7 / 1.04 3.12 0.8 0.6 1.4 17.5 579 3.08

10 1 / 3.57 3.57 1.0 0.6 1.4 20.0 839 1.83

7 / 1.35 4.05 1.0 0.6 1.4 21.5 898 1.83

16 7 / 1.70 5.10 1.0 0.8 1.6 25.0 1310 1.15

25 7 / 2.13 6.39 1.2 1.0 1.6 30.0 1969 0.727

35 7 / 2.52 7.56 1.2 1.2 1.6 33.5 2617 0.524

300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (NYM) - IEC 60227 , SPLN 42-2

Conductor Nominal Nominal Overall Maximum

Nominal No./ Diameter Thickness Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of Inner of of of Resistance

Sheath cable cablesection of wire Conductor Insulation

mm mm

at 20°C

area (approx.) (approx.) (approx.) (approx.) (approx.)

covering

Page - 9

Ω/kmmm mm mm kg/kmmm² No./mm

Page 12: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 300/500 V

Insulation : PVC Compound type D Operating Temperature

Sheath : PVC Compound type ST5 Maximum 70°C

Colour Ident. : Insulation: Two core - Red,Black

Three core - Red,Yellow, Blue

Four core - Red,Yellow, Blue, Black

Five core - Black with numbering code

Sheath - White

Number

of

Core

-

0.75 1.13 7.0 64 26.0

2 1 0.21 1.31 7.5 74 19.5

1.5 1.58 8.5 98 13.3

2.5 0.26 2.04 10.0 145 7.98

0.75 1.13 7.5 75 26.0

3 1 0.21 1.31 7.5 87 19.5

1.5 1.58 9.0 121 13.3

2.5 0.26 2.04 10.5 180 7.98

0.75 1.13 8.0 90 26.0

4 1 0.21 1.31 8.5 108 19.5

1.5 1.58 10.0 150 13.3

2.5 0.26 2.04 11.5 219 7.98

0.75 1.13 9.0 111 26.0

5 1 0.21 1.31 9.5 129 19.5

1.5 1.58 11.0 182 13.3

2.5 0.26 2.04 13.0 266 7.98

Conductor Nominal Nominal Overall Maximum

Nominal Maximum Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

cable at 20°Csection of wire Conductor Insulation

(approx.) (approx.) (approx.)

Sheath cable

Ω/km

(approx.)

mm² mm mm mm mm mm kg/km

area

0.6 0.8

0.26 0.7 0.8

0.8 1.0

0.21 0.6 0.8

0.6 0.8

0.26 0.7 0.9

0.8 1.1

0.21 0.6 0.8

0.6 0.9

0.26 0.7 1.0

0.26 0.7 1.1

0.8 1.1

0.21 0.6 0.9

0.21

300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-2)

Page - 10

0.8 1.2

0.80.6

0.6 0.9

Page 13: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type D Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST5

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1.58 1.8 10.5 126 13.3

2.5 0.26 2.04 1.8 12.0 166 7.98

4 0.31 2.59 1.8 14.0 230 4.95

6 0.31 3.46 1.8 15.5 297 3.30

10 0.41 4.62 1.8 18.0 422 1.91

16 0.41 5.66 1.8 20.0 562 1.21

25 0.41 7.06 1.8 23.5 809 0.780

35 0.41 8.43 1.8 26.0 1061 0.554

50 0.41 10.07 1.8 30.5 1451 0.386

70 0.51 11.97 1.9 34.5 1949 0.272

95 0.51 13.73 2.0 39.0 2546 0.206

120 0.51 15.53 2.1 43.0 3160 0.161

Conductor

Maximum

Diameter

kg/km

1.6

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

0.26

mm mm mm

(approx.) (approx.)(approx.)(approx.)

of

Weight

mm² mmmm

of

Insulation Sheath

Thickness

area

Nominal Nominal

Conductor

Ω/km

1.4

1.4

1.6

Thickness

MaximumOverall

at 20°C

diameter

Resistance

cable

of

section Conductor

Nominal Diameter

Cross- of

of wire

of

cable

0.7

0.8

1.0

1.0

1.0

1.0

1.2

1.2

Page - 11

Page 14: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type D Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST5

Colour Ident. : Insulation - Red,Yellow , Blue

Sheath - Black

THREE CORES

1.5 1.58 1.8 11.0 153 13.3

2.5 0.26 2.04 1.8 12.5 204 7.98

4 0.31 2.59 1.8 14.5 287 4.95

6 0.31 3.46 1.8 16.5 380 3.30

10 0.41 4.62 1.8 19.0 552 1.91

16 0.41 5.66 1.8 21.0 744 1.21

25 0.41 7.06 1.8 25.0 1085 0.780

35 0.41 8.43 1.8 28.0 1443 0.554

50 0.41 10.07 1.8 32.5 1986 0.386

70 0.51 11.97 2.0 37.0 2702 0.272

95 0.51 13.73 2.1 42.0 3542 0.206

120 0.51 15.53 2.2 46.0 4408 0.161

(approx.)area (approx.) (approx.) (approx.)

at 20°Csection of wire Conductor Insulation Sheath cable cable

of ResistanceofofCross- Diameter of of

Thickness diameter Weight

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

Conductor Nominal Nominal

ConductorNominal Maximum Diameter Thickness

Overall Maximum

mm² mm mm mm mm mm kg/km Ω/km

0.26

0.8

1.0

1.0

1.0

1.0

1.2

0.7

1.2

1.4

1.4

1.6

1.6

Page - 12

Page 15: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type D Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST5

Colour Ident. : Insulation - Red,Yellow , Blue , Black

Sheath - Black

FOUR CORES

1.5 1.58 1.8 12.0 181 13.3

2.5 0.26 2.04 1.8 13.5 247 7.98

4 0.31 2.59 1.8 16.0 353 4.95

6 0.31 3.46 1.8 18.0 471 3.30

10 0.41 4.62 1.8 20.5 696 1.91

16 0.41 5.66 1.8 23.5 942 1.21

25 0.41 7.06 1.8 27.5 1390 0.780

35 0.41 8.43 1.8 31.0 1856 0.554

50 0.41 10.07 1.9 36.0 2579 0.386

70 0.51 11.97 2.1 41.0 3517 0.272

95 0.51 13.73 2.2 47.0 4610 0.206

120 0.51 15.53 2.4 51.5 5769 0.161

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

Conductor Nominal Nominal Overall Maximum

Nominal Maximum Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

cable at 20°Csection of wire Conductor Insulation

(approx.) (approx.)

Sheath cable

(approx.)

mm² mm mm mm mm mm kg/km

area (approx.)

Ω/km

0.26

0.8

1.0

1.0

1.0

1.0

1.2

0.7

1.2

1.4

1.4

1.6

1.6

Page - 13

Page 16: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type D Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST5

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1.58 1.8 13.0 215 13.3

2.5 0.26 2.04 1.8 14.5 290 7.98

4 0.31 2.59 1.8 17.0 425 4.95

6 0.31 3.46 1.8 19.5 567 3.30

10 0.41 4.62 1.8 22.5 847 1.91

16 0.41 5.66 1.8 25.5 1154 1.21

25 0.41 7.06 1.8 30.5 1703 0.780

35 0.41 8.43 1.9 34.0 2297 0.554

50 0.41 10.07 2.0 40.0 3200 0.386

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

Conductor Nominal Nominal Overall Maximum

Nominal Maximum Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

cable at 20°Csection of wire Conductor Insulation

(approx.) (approx.)

Sheath cable

(approx.)

mm² mm mm mm mm mm kg/km

area (approx.)

Ω/km

0.26

1.0

1.0

1.2

0.7

Page - 14

0.8

1.0

1.2

1.4

1.0

Page 17: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type D Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST5

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 1.5 mm²

6 1.58 1.8 14.0 240 13.3

7 0.26 1.58 1.8 14.0 258 13.3

8 0.26 1.58 1.8 15.0 295 13.3

9 0.26 1.58 1.8 16.0 326 13.3

10 0.26 1.58 1.8 17.0 360 13.3

12 0.26 1.58 1.8 17.5 408 13.3

14 0.26 1.58 1.8 18.5 458 13.3

15 0.26 1.58 1.8 19.0 489 13.3

16 0.26 1.58 1.8 19.0 514 13.3

18 0.26 1.58 1.8 20.0 562 13.3

19 0.26 1.58 1.8 20.0 580 13.3

20 0.26 1.58 1.8 21.0 614 13.3

24 0.26 1.58 1.8 23.5 725 13.3

30 0.26 1.58 1.8 24.5 868 13.3

32 0.26 1.58 1.8 25.0 921 13.3

37 0.26 1.58 1.8 26.5 1034 13.3

40 0.26 1.58 1.8 27.5 1110 13.3

50 0.26 1.58 1.9 30.5 1374 13.3

52 0.26 1.58 1.9 31.5 1424 13.3

60 0.26 1.58 1.9 33.0 1617 13.3

61 0.26 1.58 1.9 33.0 1635 13.3

0.7

0.7

0.7

0.7

0.7

0.7

0.7

0.7

0.7

0.7

0.7

Conductor

0.7

0.7

0.7

0.7

Maximum Diameter

Ω/km

0.26 0.7

0.7

(approx.)

mm mm mm mm mm kg/km

core (approx.) (approx.) (approx.)

Sheath cable cable at 20°Cof of wire Conductor Insulation

Weight Conductor

No Diameter of of of of of Resistance

Thickness

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

Nominal Nominal Overall Maximum

Thickness diameter

Page - 15

0.7

0.7

0.7

0.7

Page 18: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 5) Uo/U - 450/750 V

Insulation : PVC Compound type D Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST5

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 2.5 mm²

6 2.04 1.8 15.5 331 7.98

7 0.26 2.04 1.8 15.5 358 7.98

8 0.26 2.04 1.8 17.0 406 7.98

9 0.26 2.04 1.8 18.0 455 7.98

10 0.26 2.04 1.8 19.5 505 7.98

12 0.26 2.04 1.8 20.0 577 7.98

14 0.26 2.04 1.8 21.0 654 7.98

15 0.26 2.04 1.8 21.5 697 7.98

16 0.26 2.04 1.8 22.0 732 7.98

18 0.26 2.04 1.8 23.0 806 7.98

19 0.26 2.04 1.8 23.0 834 7.98

20 0.26 2.04 1.8 24.0 887 7.98

24 0.26 2.04 1.8 27.0 1049 7.98

30 0.26 2.04 1.8 28.5 1266 7.98

32 0.26 2.04 1.8 29.0 1342 7.98

37 0.26 2.04 1.9 31.0 1527 7.98

40 0.26 2.04 1.9 32.0 1644 7.98

50 0.26 2.04 2.0 35.5 2037 7.98

52 0.26 2.04 2.0 36.5 2115 7.98

60 0.26 2.04 2.1 39.0 2423 7.98

61 0.26 2.04 2.1 39.0 2450 7.98

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

Ω/km

0.26 0.8

0.8

(approx.)

mm mm mm mm mm kg/km

core (approx.) (approx.) (approx.)

Resistance

of of wire Conductor Insulation Sheath cable cable at 20°C

diameter Weight Conductor

No Diameter of of of of of

Maximum Diameter Thickness Thickness

450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)

Conductor Nominal Nominal Overall Maximum

Page - 16

0.8

0.8

0.8

0.8

Page 19: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (PVC Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (acc. to IEC 60502-1)

Page - 17

1 1

22

3

4

5 5

1

2

3

4

5

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 20: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Sheath : PVC Compound type ST1 Maximum 70°C

Colour Ident. : Insulation - Black

Sheath - Black

SINGLE CORE

1.5 1 / 1.38 1.38 0.8 1.4 6.5 55 12.1

1.5 7 / 0.52 1.56 0.8 1.4 6.5 58 12.1

2.5 1 / 1.78 1.78 0.8 1.4 7.0 68 7.41

2.5 7 / 0.67 2.01 0.8 1.4 7.0 71 7.41

4 1 / 2.26 2.26 1.0 1.4 7.5 94 4.61

4 7 / 0.85 2.55 1.0 1.4 8.0 98 4.61

6 7 / 1.04 3.12 1.0 1.4 8.5 123 3.08

10 7 / 1.35 4.05 1.0 1.4 9.5 172 1.83

16 7 / 1.70 5.10 1.0 1.4 10.5 239 1.15

25 7 / 2.13 6.39 1.2 1.4 12.0 349 0.727

35 7 / 2.52 7.56 1.2 1.4 13.5 457 0.524

50 19 / 1.83 9.15 1.4 1.4 15.5 623 0.387

70 19 / 2.17 10.85 1.4 1.4 17.0 832 0.268

95 19 / 2.52 12.60 1.6 1.5 19.5 1114 0.193

120 37 / 2.03 14.21 1.6 1.5 21.0 1359 0.153

150 37 / 2.27 15.89 1.8 1.6 23.5 1689 0.124

185 37 / 2.52 17.64 2.0 1.7 25.5 2068 0.0991

240 61 / 2.26 20.34 2.2 1.8 29.0 2698 0.0754

300 61 / 2.52 22.68 2.4 1.9 32.0 3327 0.0601

400 61 / 2.86 25.74 2.6 2.0 36.0 4249 0.0470

500 61 / 3.20 28.80 2.8 2.1 39.5 5266 0.0366

630 91 / 2.96 32.56 2.8 2.2 43.5 6580 0.0283

800 127 / 2.85 37.05 2.8 2.3 48.0 8345 0.0221

1000 127 / 3.20 41.60 3.0 2.5 53.5 10455 0.0176

Weight

Page - 18

mm mm

Sheath cable

mm²(approx.)

of

(approx.)No./mm

areamm

ofsection

Thickness

at 20°C

kg/km(approx.) (approx.)

diameterof

cable

Ω/kmmm

No./Diameter

of wire Conductor

Overall

Insulation

MaximumConductor

ConductorNominal Cross- Resistance

NominalThickness

of

Nominal

of Diameter

PVC/PVC (IEC 60502-1)600/1000 V PVC INSULATED AND PVC SHEATHED CABLES

Page 21: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.8 1.8 10.5 128 12.1

1.5 7 / 0.52 1.56 0.8 1.8 11.0 136 12.1

2.5 1 / 1.78 1.78 0.8 1.8 11.5 159 7.41

2.5 7 / 0.67 2.01 0.8 1.8 12.0 168 7.41

4 1 / 2.26 2.26 1.0 1.8 13.0 220 4.61

4 7 / 0.85 2.55 1.0 1.8 14.0 231 4.61

6 7 / 1.04 3.12 1.0 1.8 15.0 287 3.08

10 7 / 1.35 4.05 1.0 1.8 17.0 398 1.83

16 7 / 1.70 5.10 1.0 1.8 19.0 545 1.15

25 7 / 2.13 6.39 1.2 1.8 22.0 794 0.727

35 7 / 2.52 7.56 1.2 1.8 24.5 1032 0.524

50 19 / 1.83 9.15 1.4 1.8 28.5 1411 0.387

70 19 / 2.17 10.85 1.4 1.9 32.0 1880 0.268

95 19 / 2.52 12.60 1.6 2.0 37.0 2507 0.193

120 37 / 2.03 14.21 1.6 2.1 40.5 3065 0.153

150 37 / 2.27 15.89 1.8 2.2 45.0 3796 0.124

185 37 / 2.52 17.64 2.0 2.4 49.5 4654 0.0991

240 61 / 2.26 20.34 2.2 2.6 56.0 6067 0.0754

300 61 / 2.52 22.68 2.4 2.7 62.0 7463 0.0601

Page - 19

(approx.) (approx.)cable

mm mm

Sheath

mm

Insulation

Ω/kmkg/km

Weightof

MaximumConductorResistance

at 20°Ccable

mm

Conductor

mm² No./mm

Conductorsection area of wire(approx.) (approx.)

600/1000 V PVC INSULATED AND PVC SHEATHED CABLES

Diameterof

NominalThickness

of

NominalNo./

Diameter

PVC/PVC (IEC 60502-1)

Nominal Cross- of

ThicknessOverall

diameterof

Page 22: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow , Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.8 1.8 11.0 155 12.1

1.5 7 / 0.52 1.56 0.8 1.8 11.5 163 12.1

2.5 1 / 1.78 1.78 0.8 1.8 12.0 195 7.41

2.5 7 / 0.67 2.01 0.8 1.8 12.5 207 7.41

4 1 / 2.26 2.26 1.0 1.8 14.0 277 4.61

4 7 / 0.85 2.55 1.0 1.8 14.5 290 4.61

6 7 / 1.04 3.12 1.0 1.8 15.5 367 3.08

10 7 / 1.35 4.05 1.0 1.8 18.0 521 1.83

16 7 / 1.70 5.10 1.0 1.8 20.0 728 1.15

25 7 / 2.13 6.39 1.2 1.8 23.5 1078 0.727

35 7 / 2.52 7.56 1.2 1.8 26.0 1410 0.524

50 6.8 1.4 1.8 25.0 1741 0.387

70 8.2 1.4 2.0 28.0 2415 0.268

95 9.7 1.6 2.1 33.0 3319 0.193

120 10.9 1.6 2.2 35.5 3963 0.153

150 11.9 1.8 2.3 38.5 4851 0.124

185 13.6 2.0 2.5 43.5 6056 0.0991

240 15.8 2.2 2.7 49.0 8072 0.0754

300 17.5 2.4 2.9 54.0 10034 0.0601

Page - 20

(approx.) (approx.) (approx.)(approx.)Sheath cable cable

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Ω/km

Three-

Segmental

Stranded

kg/kmmm mmmm² No./mm mm mm

at 20°Csection area of wire Conductor Insulationof of ResistanceCross- Diameter of of of

Thickness diameter Weight ConductorNominal No./ Diameter ThicknessConductor Nominal Nominal Overall Maximum

Page 23: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow , Blue , Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.8 1.8 12.0 184 12.1

1.5 7 / 0.52 1.56 0.8 1.8 12.5 193 12.1

2.5 1 / 1.78 1.78 0.8 1.8 13.0 239 7.41

2.5 7 / 0.67 2.01 0.8 1.8 13.5 251 7.41

4 1 / 2.26 2.26 1.0 1.8 15.0 342 4.61

4 7 / 0.85 2.55 1.0 1.8 16.0 360 4.61

6 7 / 1.04 3.12 1.0 1.8 17.0 461 3.08

10 7 / 1.35 4.05 1.0 1.8 19.5 658 1.83

16 7 / 1.70 5.10 1.0 1.8 22.0 930 1.15

25 7 / 2.13 6.39 1.2 1.8 26.0 1378 0.727

35 7 / 2.52 7.56 1.2 1.8 29.0 1818 0.524

50 8.1 1.4 1.9 28.5 2264 0.387

70 9.7 1.4 2.1 32.0 3148 0.268

95 11.4 1.6 2.2 37.5 4326 0.193

120 12.9 1.6 2.4 41.0 5198 0.153

150 14.2 1.8 2.5 45.0 6373 0.124

185 16.0 2.0 2.7 50.0 7938 0.0991

240 18.2 2.2 2.9 56.0 10564 0.0754

300 20.6 2.4 3.1 62.5 13201 0.0601

Page - 21

(approx.) (approx.)(approx.) (approx.)mm mm kg/km Ω/kmmm² No./mm mm mm

Sheath cable cable at 20°Csection area of wire Conductor Insulationof of of ResistanceCross- Diameter of of

Thickness diameter Weight ConductorNominal No./ Diameter ThicknessConductor Nominal Nominal Overall Maximum

Stranded

Segmental

Four-

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Page 24: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.8 1.8 13.0 218 12.1

1.5 7 / 0.52 1.56 0.8 1.8 13.5 230 12.1

2.5 1 / 1.78 1.78 0.8 1.8 14.0 280 7.41

2.5 7 / 0.67 2.01 0.8 1.8 14.5 296 7.41

4 1 / 2.26 2.26 1.0 1.8 16.5 408 4.61

4 7 / 0.85 2.55 1.0 1.8 17.5 430 4.61

6 7 / 1.04 3.12 1.0 1.8 18.5 556 3.08

10 7 / 1.35 4.05 1.0 1.8 21.5 800 1.83

16 7 / 1.70 5.10 1.0 1.8 24.0 1135 1.15

25 7 / 2.13 6.39 1.2 1.8 28.5 1692 0.727

35 7 / 2.52 7.56 1.2 1.9 32.0 2257 0.524

50 19 / 1.83 9.15 1.4 2.1 38.0 3152 0.387

Page - 22

(approx.) (approx.)

Maximum

(approx.) (approx.)

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Sheath cable cable at 20°C

Ω/kmmm² No./mm mm mm mm mm kg/km

section area of wire Conductor InsulationResistanceCross- Diameter of of of of of ConductorNominal No./ Diameter Thickness Thickness diameter Weight

Conductor Nominal Nominal Overall

Page 25: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler (if necessary) : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 1.5 mm² (Solid conductor)

No Nominal of Cross-section

core area

mm²

6 1.5 1 / 1.38 1.38 0.8 1.8 14.0 245 12.1

7 1.5 1 / 1.38 1.38 0.8 1.8 14.0 263 12.1

8 1.5 1 / 1.38 1.38 0.8 1.8 15.0 297 12.1

9 1.5 1 / 1.38 1.38 0.8 1.8 16.0 332 12.1

10 1.5 1 / 1.38 1.38 0.8 1.8 17.0 367 12.1

12 1.5 1 / 1.38 1.38 0.8 1.8 17.5 416 12.1

14 1.5 1 / 1.38 1.38 0.8 1.8 18.5 468 12.1

15 1.5 1 / 1.38 1.38 0.8 1.8 19.0 500 12.1

16 1.5 1 / 1.38 1.38 0.8 1.8 19.5 525 12.1

18 1.5 1 / 1.38 1.38 0.8 1.8 20.0 575 12.1

19 1.5 1 / 1.38 1.38 0.8 1.8 20.0 593 12.1

20 1.5 1 / 1.38 1.38 0.8 1.8 21.0 628 12.1

21 1.5 1 / 1.38 1.38 0.8 1.8 21.0 650 12.1

24 1.5 1 / 1.38 1.38 0.8 1.8 23.5 742 12.1

30 1.5 1 / 1.38 1.38 0.8 1.8 24.5 889 12.1

32 1.5 1 / 1.38 1.38 0.8 1.8 25.0 943 12.1

37 1.5 1 / 1.38 1.38 0.8 1.8 26.5 1059 12.1

40 1.5 1 / 1.38 1.38 0.8 1.8 27.5 1139 12.1

50 1.5 1 / 1.38 1.38 0.8 1.9 30.5 1408 12.1

52 1.5 1 / 1.38 1.38 0.8 1.9 31.5 1460 12.1

60 1.5 1 / 1.38 1.38 0.8 2.0 33.5 1674 12.1

61 1.5 1 / 1.38 1.38 0.8 2.0 33.5 1692 12.1

Page - 23

cable cableInsulation Sheath(approx.) (approx.)(approx.) (approx.)

at 20°C

No./mm mm mm mm mm kg/km Ω/km

of wire Conductor

diameter Weight ConductorDiameter of of of of of Resistance

No./ Diameter Thickness Thickness

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page 26: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler (if necessary) : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 1.5 mm² (Stranded conductor)

No Nominal of Cross-section

core area

mm²

6 1.5 7 / 0.52 1.56 0.8 1.8 14.5 259 12.1

7 1.5 7 / 0.52 1.56 0.8 1.8 14.5 278 12.1

8 1.5 7 / 0.52 1.56 0.8 1.8 15.5 314 12.1

9 1.5 7 / 0.52 1.56 0.8 1.8 16.5 351 12.1

10 1.5 7 / 0.52 1.56 0.8 1.8 18.0 389 12.1

12 1.5 7 / 0.52 1.56 0.8 1.8 18.5 439 12.1

14 1.5 7 / 0.52 1.56 0.8 1.8 19.0 494 12.1

15 1.5 7 / 0.52 1.56 0.8 1.8 19.5 527 12.1

16 1.5 7 / 0.52 1.56 0.8 1.8 20.0 554 12.1

18 1.5 7 / 0.52 1.56 0.8 1.8 21.0 608 12.1

19 1.5 7 / 0.52 1.56 0.8 1.8 21.0 626 12.1

20 1.5 7 / 0.52 1.56 0.8 1.8 22.0 663 12.1

21 1.5 7 / 0.52 1.56 0.8 1.8 22.0 687 12.1

24 1.5 7 / 0.52 1.56 0.8 1.8 24.5 786 12.1

30 1.5 7 / 0.52 1.56 0.8 1.8 26.0 939 12.1

32 1.5 7 / 0.52 1.56 0.8 1.8 26.5 996 12.1

37 1.5 7 / 0.52 1.56 0.8 1.8 28.0 1119 12.1

40 1.5 7 / 0.52 1.56 0.8 1.8 29.0 1204 12.1

50 1.5 7 / 0.52 1.56 0.8 1.9 32.0 1488 12.1

52 1.5 7 / 0.52 1.56 0.8 1.9 33.0 1543 12.1

60 1.5 7 / 0.52 1.56 0.8 2.0 35.0 1770 12.1

61 1.5 7 / 0.52 1.56 0.8 2.0 35.0 1788 12.1

Page - 24

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNo./ Diameter Thickness Thickness

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

Conductorof of Resistance

diameter Weight

cable(approx.) (approx.) (approx.) (approx.)

kg/km Ω/kmNo./mm mm mm mm mm

Page 27: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler (if necessary) : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 2.5 mm² (Solid conductor)

No Nominal of Cross-section

core area

mm²

6 2.5 1 / 1.78 1.78 0.8 1.8 15.0 320 7.41

7 2.5 1 / 1.78 1.78 0.8 1.8 15.0 348 7.41

8 2.5 1 / 1.78 1.78 0.8 1.8 16.0 394 7.41

9 2.5 1 / 1.78 1.78 0.8 1.8 17.0 442 7.41

10 2.5 1 / 1.78 1.78 0.8 1.8 18.5 488 7.41

12 2.5 1 / 1.78 1.78 0.8 1.8 19.0 558 7.41

14 2.5 1 / 1.78 1.78 0.8 1.8 20.0 636 7.41

15 2.5 1 / 1.78 1.78 0.8 1.8 20.5 673 7.41

16 2.5 1 / 1.78 1.78 0.8 1.8 21.0 710 7.41

18 2.5 1 / 1.78 1.78 0.8 1.8 22.0 783 7.41

19 2.5 1 / 1.78 1.78 0.8 1.8 22.0 811 7.41

20 2.5 1 / 1.78 1.78 0.8 1.8 23.0 863 7.41

21 2.5 1 / 1.78 1.78 0.8 1.8 23.5 890 7.41

24 2.5 1 / 1.78 1.78 0.8 1.8 26.0 1018 7.41

30 2.5 1 / 1.78 1.78 0.8 1.8 27.5 1232 7.41

32 2.5 1 / 1.78 1.78 0.8 1.8 28.0 1303 7.41

37 2.5 1 / 1.78 1.78 0.8 1.9 29.5 1487 7.41

40 2.5 1 / 1.78 1.78 0.8 1.9 30.5 1600 7.41

50 2.5 1 / 1.78 1.78 0.8 2.0 34.0 1981 7.41

52 2.5 1 / 1.78 1.78 0.8 2.0 35.0 2060 7.41

60 2.5 1 / 1.78 1.78 0.8 2.1 37.0 2359 7.41

61 2.5 1 / 1.78 1.78 0.8 2.1 37.0 2387 7.41

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

MaximumConductor

Page - 25

Overalldiameter Weight ConductorThickness

Nominal NominalNo./ Diameter

of of Diameter of of ofThickness

Resistanceof wire Conductor Insulation Sheath cable cable at 20°C

(approx.) (approx.) (approx.)No./mm mm mm mm

(approx.)mm kg/km Ω/km

Page 28: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler (if necessary) : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 2.5 mm² (Stranded conductor)

No Nominal of Cross-section

core area

mm²

6 2.5 7 / 0.67 2.01 0.8 1.8 15.5 338 7.41

7 2.5 7 / 0.67 2.01 0.8 1.8 15.5 365 7.41

8 2.5 7 / 0.67 2.01 0.8 1.8 17.0 415 7.41

9 2.5 7 / 0.67 2.01 0.8 1.8 18.0 465 7.41

10 2.5 7 / 0.67 2.01 0.8 1.8 19.5 515 7.41

12 2.5 7 / 0.67 2.01 0.8 1.8 20.0 590 7.41

14 2.5 7 / 0.67 2.01 0.8 1.8 21.0 669 7.41

15 2.5 7 / 0.67 2.01 0.8 1.8 21.5 713 7.41

16 2.5 7 / 0.67 2.01 0.8 1.8 22.0 749 7.41

18 2.5 7 / 0.67 2.01 0.8 1.8 23.0 826 7.41

19 2.5 7 / 0.67 2.01 0.8 1.8 23.0 854 7.41

20 2.5 7 / 0.67 2.01 0.8 1.8 24.0 908 7.41

21 2.5 7 / 0.67 2.01 0.8 1.8 24.5 938 7.41

24 2.5 7 / 0.67 2.01 0.8 1.8 27.0 1074 7.41

30 2.5 7 / 0.67 2.01 0.8 1.8 28.5 1298 7.41

32 2.5 7 / 0.67 2.01 0.8 1.8 29.0 1377 7.41

37 2.5 7 / 0.67 2.01 0.8 1.9 31.0 1567 7.41

40 2.5 7 / 0.67 2.01 0.8 1.9 32.5 1687 7.41

50 2.5 7 / 0.67 2.01 0.8 2.0 35.5 2088 7.41

52 2.5 7 / 0.67 2.01 0.8 2.0 36.5 2168 7.41

60 2.5 7 / 0.67 2.01 0.8 2.1 39.0 2488 7.41

61 2.5 7 / 0.67 2.01 0.8 2.1 39.0 2515 7.41

Page - 26

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNo./ Diameter Thickness Thickness

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

Conductorof of Resistance

diameter Weight

cable(approx.) (approx.) (approx.) (approx.)

kg/km Ω/kmNo./mm mm mm mm mm

Page 29: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 clas 1) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler (if necessary) : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 4 mm² (Solid conductor)

No Nominal of Cross-section

core area

mm²

6 4 1 / 2.26 2.26 1.0 1.8 17.5 465 4.61

7 4 1 / 2.26 2.26 1.0 1.8 17.5 508 4.61

8 4 1 / 2.26 2.26 1.0 1.8 19.0 579 4.61

9 4 1 / 2.26 2.26 1.0 1.8 20.5 650 4.61

10 4 1 / 2.26 2.26 1.0 1.8 22.0 722 4.61

12 4 1 / 2.26 2.26 1.0 1.8 23.5 831 4.61

14 4 1 / 2.26 2.26 1.0 1.8 24.0 950 4.61

15 4 1 / 2.26 2.26 1.0 1.8 24.5 1012 4.61

16 4 1 / 2.26 2.26 1.0 1.8 25.5 1068 4.61

18 4 1 / 2.26 2.26 1.0 1.8 26.5 1178 4.61

19 4 1 / 2.26 2.26 1.0 1.8 26.5 1221 4.61

20 4 1 / 2.26 2.26 1.0 1.8 27.5 1294 4.61

21 4 1 / 2.26 2.26 1.0 1.8 28.0 1344 4.61

24 4 1 / 2.26 2.26 1.0 1.9 31.5 1555 4.61

30 4 1 / 2.26 2.26 1.0 2.0 33.5 1904 4.61

32 4 1 / 2.26 2.26 1.0 2.0 34.0 2020 4.61

37 4 1 / 2.26 2.26 1.0 2.1 26.5 2300 4.61

40 4 1 / 2.26 2.26 1.0 2.1 37.5 2478 4.61

50 4 1 / 2.26 2.26 1.0 2.3 42.0 3090 4.61

52 4 1 / 2.26 2.26 1.0 2.3 43.0 3212 4.61

60 4 1 / 2.26 2.26 1.0 2.4 46.0 3678 4.61

61 4 1 / 2.26 2.26 1.0 2.4 46.0 3721 4.61

Page - 27

kg/km Ω/kmNo./mm mm mm mm mm

cable(approx.) (approx.) (approx.) (approx.)

Conductorof of Resistance

diameter Weight

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

No./ Diameter Thickness Thickness

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page 30: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 clas 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler (if necessary) : Suitable material Maximum 70°C

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 4 mm² (Stranded conductor)

No Nominal of Cross-section

core area

mm²

6 4 7 / 0.85 2.55 1.0 1.8 18.5 491 4.61

7 4 7 / 0.85 2.55 1.0 1.8 18.5 535 4.61

8 4 7 / 0.85 2.55 1.0 1.8 20.0 610 4.61

9 4 7 / 0.85 2.55 1.0 1.8 21.5 686 4.61

10 4 7 / 0.85 2.55 1.0 1.8 23.5 760 4.61

12 4 7 / 0.85 2.55 1.0 1.8 24.0 875 4.61

14 4 7 / 0.85 2.55 1.0 1.8 25.5 1000 4.61

15 4 7 / 0.85 2.55 1.0 1.8 26.0 1066 4.61

16 4 7 / 0.85 2.55 1.0 1.8 27.0 1126 4.61

18 4 7 / 0.85 2.55 1.0 1.8 28.0 1243 4.61

19 4 7 / 0.85 2.55 1.0 1.8 28.0 1287 4.61

20 4 7 / 0.85 2.55 1.0 1.8 29.0 1364 4.61

21 4 7 / 0.85 2.55 1.0 1.8 29.5 1417 4.61

24 4 7 / 0.85 2.55 1.0 1.9 33.0 1638 4.61

30 4 7 / 0.85 2.55 1.0 2.0 35.5 2006 4.61

32 4 7 / 0.85 2.55 1.0 2.0 36.0 2128 4.61

37 4 7 / 0.85 2.55 1.0 2.1 38.5 2424 4.61

40 4 7 / 0.85 2.55 1.0 2.1 40.0 2612 4.61

50 4 7 / 0.85 2.55 1.0 2.3 44.5 3254 4.61

52 4 7 / 0.85 2.55 1.0 2.3 45.5 3380 4.61

60 4 7 / 0.85 2.55 1.0 2.4 48.5 3877 4.61

61 4 7 / 0.85 2.55 1.0 2.4 48.5 3922 4.61

Page - 28

600/1000 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNo./ Diameter Thickness Thickness

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

Conductorof of Resistance

diameter Weight

cable(approx.) (approx.) (approx.) (approx.)

kg/km Ω/kmNo./mm mm mm mm mm

Page 31: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

Constructions : Conductor (Annealed Copper)

Insulation (PVC Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Copper Tape screen

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)

Page - 29

1

23

4

5

6

7

1

2

3

4

5

7

6

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Copper wire screen.* Polyethylene / Low smoke Halogen Free sheathed

Page 32: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.8 0.1 1.8 10.5 145 12.1

1.5 7 / 0.52 1.56 0.8 0.1 1.8 11.0 147 12.1

2.5 1 / 1.78 1.78 0.8 0.1 1.8 11.5 176 7.41

2.5 7 / 0.67 2.01 0.8 0.1 1.8 11.5 179 7.41

4 1 / 2.26 2.26 1.0 0.1 1.8 13.0 240 4.61

4 7 / 0.85 2.55 1.0 0.1 1.8 13.5 246 4.61

6 7 / 1.04 3.12 1.0 0.1 1.8 14.5 304 3.08

10 7 / 1.35 4.05 1.0 0.1 1.8 16.5 418 1.83

16 7 / 1.70 5.10 1.0 0.1 1.8 18.5 568 1.15

25 7 / 2.13 6.39 1.2 0.1 1.8 22.0 822 0.727

35 7 / 2.52 7.56 1.2 0.1 1.8 24.5 1064 0.524

50 19 / 1.83 9.15 1.4 0.1 1.8 28.5 1450 0.387

70 19 / 2.17 10.85 1.4 0.1 1.9 32.0 1910 0.268

95 19 / 2.52 12.60 1.6 0.1 2.0 36.5 2542 0.193

120 37 / 2.03 14.21 1.6 0.1 2.1 40.0 3103 0.153

150 37 / 2.27 15.89 1.8 0.1 2.2 44.5 3840 0.124

185 37 / 2.52 17.64 2.0 0.1 2.4 49.0 4679 0.0991

240 61 / 2.26 20.34 2.2 0.1 2.6 55.5 6096 0.0754

300 61 / 2.52 22.68 2.4 0.1 2.7 61.5 7523 0.0601

Nominal

Cross- of

Thickness

Overall

diameter

of

Nominal

Thickness

600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLES

Diameter

of

Nominal

Thickness

of

Nominal

No./

Diameter

PVC/PVC-S (IEC 60502-1)

mm

Conductor

mm² No./mm

Conductorsection area of wire

(approx.) (approx.)

Ω/kmkg/km

Weight

of

Maximum

Conductor

Resistance

at 20°Ccablecable

mm mm

Sheath

mm

Insulation

(approx.) (approx.) (approx.)

of

Copper tape

mm

Page - 30

Page 33: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow , Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.8 0.1 1.8 11.0 173 12.1

1.5 7 / 0.52 1.56 0.8 0.1 1.8 11.5 174 12.1

2.5 1 / 1.78 1.78 0.8 0.1 1.8 12.0 214 7.41

2.5 7 / 0.67 2.01 0.8 0.1 1.8 12.5 220 7.41

4 1 / 2.26 2.26 1.0 0.1 1.8 14.0 298 4.61

4 7 / 0.85 2.55 1.0 0.1 1.8 14.5 306 4.61

6 7 / 1.04 3.12 1.0 0.1 1.8 15.0 385 3.08

10 7 / 1.35 4.05 1.0 0.1 1.8 17.5 542 1.83

16 7 / 1.70 5.10 1.0 0.1 1.8 20.0 753 1.15

25 7 / 2.13 6.39 1.2 0.1 1.8 23.5 1108 0.727

35 7 / 2.52 7.56 1.2 0.1 1.8 26.0 1445 0.524

50 6.8 1.4 0.1 1.9 25.0 1774 0.387

70 8.2 1.4 0.1 2.0 28.0 2439 0.268

95 9.7 1.6 0.1 2.1 32.5 3348 0.193

120 10.9 1.6 0.1 2.2 35.0 3994 0.153

150 11.9 1.8 0.1 2.4 38.5 4885 0.124

185 13.6 2.0 0.1 2.5 43.0 6076 0.0991

240 15.8 2.2 0.1 2.7 48.5 8095 0.0754

300 17.5 2.4 0.1 2.9 53.5 10060 0.0601

Conductor Nominal Nominal Overall Maximum

Nominal No./ Diameter Thickness Thickness diameter Weight Conductor

of of ResistanceCross- Diameter of of

at 20°Csection area of wire Conductor Insulation

mm² No./mm mm mm

Stranded

kg/kmmm mm

600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)

Ω/km

Three-

Segmental

(approx.) (approx.) (approx.)(approx.)

Sheath cable cable

of

Nominal

Thickness

of

Copper tape

mm

(approx.)

Page - 31

Page 34: Catalogue LV 07

Section 2 - PVC Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow , Blue , Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.8 0.1 1.8 12.0 202 12.1

1.5 7 / 0.52 1.56 0.8 0.1 1.8 12.5 206 12.1

2.5 1 / 1.78 1.78 0.8 0.1 1.8 13.0 260 7.41

2.5 7 / 0.67 2.01 0.8 0.1 1.8 13.5 265 7.41

4 1 / 2.26 2.26 1.0 0.1 1.8 15.0 366 4.61

4 7 / 0.85 2.55 1.0 0.1 1.8 15.5 378 4.61

6 7 / 1.04 3.12 1.0 0.1 1.8 17.0 482 3.08

10 7 / 1.35 4.05 1.0 0.1 1.8 19.5 682 1.83

16 7 / 1.70 5.10 1.0 0.1 1.8 21.5 957 1.15

25 7 / 2.13 6.39 1.2 0.1 1.8 26.0 1412 0.727

35 7 / 2.52 7.56 1.2 0.1 1.8 28.5 1856 0.524

50 8.1 1.4 0.1 2.0 28.5 2302 0.387

70 9.7 1.4 0.1 2.1 32.0 3177 0.268

95 11.4 1.6 0.1 2.2 37.0 4360 0.193

120 12.9 1.6 0.1 2.4 40.5 5217 0.153

150 14.2 1.8 0.1 2.5 44.5 6394 0.124

185 16.0 2.0 0.1 2.7 49.5 7962 0.0991

240 18.2 2.2 0.1 2.9 55.5 10591 0.0754

300 20.6 2.4 0.1 3.1 61.5 13179 0.0601

Stranded

Segmental

Four-

600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNominal

Nominal No./ Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

section area of wire Conductor Insulation Sheath cable cable at 20°C

mm² No./mm mm mm mm mm kg/km Ω/km

(approx.) (approx.) (approx.) (approx.)

Thickness

of

Copper tape

mm

(approx.)

Page - 32

Page 35: Catalogue LV 07

Section 2 - PVC Insulated CablesUnarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.8 0.1 1.8 12.5 238 12.1

1.5 7 / 0.52 1.56 0.8 0.1 1.8 13.5 244 12.1

2.5 1 / 1.78 1.78 0.8 0.1 1.8 14.0 302 7.41

2.5 7 / 0.67 2.01 0.8 0.1 1.8 14.5 312 7.41

4 1 / 2.26 2.26 1.0 0.1 1.8 16.5 434 4.61

4 7 / 0.85 2.55 1.0 0.1 1.8 17.0 450 4.61

6 7 / 1.04 3.12 1.0 0.1 1.8 18.5 578 3.08

10 7 / 1.35 4.05 1.0 0.1 1.8 21.0 827 1.83

16 7 / 1.70 5.10 1.0 0.1 1.8 24.0 1166 1.15

25 7 / 2.13 6.39 1.2 0.1 1.8 28.5 1730 0.727

35 7 / 2.52 7.56 1.2 0.1 1.9 31.5 2286 0.524

50 19 / 1.83 9.15 1.4 0.1 2.1 37.5 3057 0.387

Conductor Nominal Nominal OverallNominal

Nominal No./ Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

section area of wire Conductor Insulation

mm² No./mm mm mm mm mm kg/km Ω/km

(approx.) (approx.)

600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)

Sheath cable cable at 20°C

(approx.) (approx.)

Maximum

mm

(approx.)

Page - 33

Thickness

of

Copper tape

Page 36: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (PVC Compound)

Inner Covering (PVC Compound)

Round Aluminium Wire armour

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

Constructions :Conductor (Annealed Copper)

Insulation (PVC Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Inner Covering (PVC Compound)

Galvanized Round Steel Wire armour

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

Page - 34

600/1000 V PVC INSULATED, ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLESPVC/AWA/PVC (acc. to IEC 60502-1)

600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/SWA/PVC (acc. to IEC 60502-1)

11

2

3

5

4

6

7

8

2

3

4

5

6

7

8

1

2

3

4

5

6

1

2

3

4

5

6

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 37: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Inner covering : PVC Compound ST1 Maximum 70°C

Armour : Aluminium Wire

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black

Sheath - Black

SINGLE CORE

16 7 / 1.70 5.10 1.0 1.0 0.8 1.8 14.5 370 1.15

25 7 / 2.13 6.39 1.2 1.0 0.8 1.8 16.5 495 0.727

35 7 / 2.52 7.56 1.2 1.0 0.8 1.8 17.5 620 0.524

50 19 / 1.83 9.15 1.4 1.0 1.25 1.8 20.5 845 0.387

70 19 / 2.17 10.85 1.4 1.0 1.25 1.8 22.0 1075 0.268

95 19 / 2.52 12.60 1.6 1.0 1.25 1.8 24.5 1380 0.193

120 37 / 2.03 14.21 1.6 1.0 1.6 1.8 27.0 1705 0.153

150 37 / 2.27 15.89 1.8 1.0 1.6 1.8 29.0 2054 0.124

185 37 / 2.52 17.64 2.0 1.0 1.6 1.8 31.0 2450 0.0991

240 61 / 2.26 20.34 2.2 1.0 1.6 1.9 34.0 3110 0.0754

300 61 / 2.52 22.68 2.4 1.0 2.0 2.0 38.0 3865 0.0601

400 61 / 2.86 25.74 2.6 1.2 2.0 2.1 42.0 4885 0.0470

500 61 / 3.20 28.80 2.8 1.2 2.0 2.2 46.0 5965 0.0366

630 91 / 2.96 32.56 2.8 1.2 2.0 2.4 50.0 7335 0.0283

800 127 / 2.85 37.05 2.8 1.4 2.5 2.5 56.0 9410 0.0221

1000 127 / 3.20 41.60 3.0 1.4 2.5 2.7 61.0 11635 0.0176

Nominal

mm

Nominal

Thickness

of inner

covering

(approx.)

mm

(approx.)

PVC/AWA/PVC (IEC 60502-1)600/1000 V PVC INSULATED,ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLES

Nominal

Cross- Resistance

Nominal

Thickness

of

Nominal

No./

Diameter

of wire Conductor

Overall

Insulation

Maximum

Conductor

Conductor

Ω/kmmm

of

Thickness

at 20°C

kg/km

(approx.) (approx.)

diameter

of

mm²

(approx.)(approx.)

No./mm

area

mm

section

Weight

of

cable

Aluminium

wire

diameter ofDiameter

of

Page - 35

mm mm

Sheath cable

Page 38: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 14.0 332 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 14.5 347 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 15.0 380 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 15.5 395 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 16.5 473 4.61

4 7 / 0.85 2.55 1.0 1.0 0.8 1.8 17.5 494 4.61

6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 19.0 667 3.08

10 7 / 1.35 4.05 1.0 1.0 1.25 1.8 21.0 837 1.83

16 7 / 1.70 5.10 1.0 1.0 1.25 1.8 23.0 1019 1.15

25 7 / 2.13 6.39 1.2 1.0 1.6 1.8 27.5 1507 0.727

35 7 / 2.52 7.56 1.2 1.0 1.6 1.8 30.0 1810 0.524

50 19 / 1.83 9.15 1.4 1.0 1.6 1.9 34.0 2318 0.387

70 19 / 2.17 10.85 1.4 1.0 2.0 2.0 38.0 3122 0.268

95 19 / 2.52 12.60 1.6 1.2 2.0 2.2 43.5 3987 0.193

120 37 / 2.03 14.21 1.6 1.2 2.0 2.3 47.0 4695 0.153

150 37 / 2.27 15.89 1.8 1.2 2.5 2.4 52.0 5994 0.124

185 37 / 2.52 17.64 2.0 1.4 2.5 2.6 57.0 7109 0.0991

240 61 / 2.26 20.34 2.2 1.4 2.5 2.8 63.5 8827 0.0754

300 61 / 2.52 22.68 2.4 1.6 2.5 2.9 70.0 10574 0.0601

(approx.)

mm mm mm kg/kmmmmm

section of wire Conductor

mm² No./mm mm

area (approx.) (approx.)

Cross- Diameter of of

Maximum

(approx.)

Insulation

Conductor

of of of

Thickness

of Inner

covering

Diameter Thickness

OverallNominal Nominal

Diameter Weightdiameter

Nominal

cable cable at 20°C

(approx.)

600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/SWA/PVC (IEC 60502-1)

Thickness

Sheath

Conductor

Ω/km

Resistance

Nominal No./

of Galv.

Steel wire

Page - 36

Page 39: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 14.5 371 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 15.0 385 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 15.5 429 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 16.0 446 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 18.0 637 4.61

4 7 / 0.85 2.55 1.0 1.0 1.25 1.8 18.5 660 4.61

6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 20.0 768 3.08

10 7 / 1.35 4.05 1.0 1.0 1.25 1.8 22.0 973 1.83

16 7 / 1.70 5.10 1.0 1.0 1.25 1.8 24.0 1229 1.15

25 7 / 2.13 6.39 1.2 1.0 1.6 1.8 29.0 1819 0.727

35 7 / 2.52 7.56 1.2 1.0 1.6 1.8 31.5 2230 0.524

50 6.8 1.4 1.0 1.6 2.0 30.5 2558 0.387

70 8.2 1.4 1.2 2.0 2.1 34.5 3577 0.268

95 9.7 1.6 1.2 2.0 2.2 39.0 4653 0.193

120 10.9 1.6 1.2 2.0 2.3 42.0 5410 0.153

150 11.9 1.8 1.4 2.5 2.5 46.0 6830 0.124

185 13.6 2.0 1.4 2.5 2.7 51.0 8260 0.0991

240 15.8 2.2 1.6 2.5 2.9 57.0 10632 0.0754

300 17.5 2.4 1.6 2.5 3.1 62.0 12795 0.0601

area (approx.)

Sector Shape

mm mm

(approx.)

mm² No./mm Ω/km

(approx.) (approx.)

mm mm kg/km

(approx.)

mm mm

Maximum

Sheath cable

Thickness

Resistance

cable at 20°C

Conductor Nominal Nominal OverallNominal

ConductorNominal No./ Diameter Thickness Thickness Diameter

of of of Galv. ofof Inner

diameter Weight

Conductor Insulation

Cross- Diameter of of

600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/SWA/PVC (IEC 60502-1)

Page - 37

covering Steel wiresection of wire

stranded

Page 40: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 15.5 412 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 16.0 434 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 16.5 486 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 17.0 508 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 19.5 736 4.61

4 7 / 0.85 2.55 1.0 1.0 1.25 1.8 20.0 762 4.61

6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 21.0 894 3.08

10 7 / 1.35 4.05 1.0 1.0 1.25 1.8 23.5 1142 1.83

16 7 / 1.70 5.10 1.0 1.0 1.6 1.8 27.0 1621 1.15

25 7 / 2.13 6.39 1.2 1.0 1.6 1.8 31.0 2183 0.727

35 7 / 2.52 7.56 1.2 1.0 1.6 1.9 34.0 2698 0.524

50 8.1 1.4 1.2 2.0 2.1 35.0 3467 0.387

70 9.7 1.4 1.2 2.0 2.2 38.5 4455 0.268

95 11.4 1.6 1.2 2.5 2.4 44.5 6222 0.193

120 12.9 1.6 1.4 2.5 2.5 48.5 7248 0.153

150 14.2 1.8 1.4 2.5 2.7 52.5 8663 0.124

185 16.0 2.0 1.6 2.5 2.9 58.0 10503 0.0991

240 18.2 2.2 1.6 2.5 3.1 63.5 13414 0.0754

300 20.6 2.4 1.6 2.5 3.3 70.0 16298 0.0601

Conductor Nominal MaximumNominal

PVC/SWA/PVC (IEC 60502-1)

Weight ConductorNominal No./ Diameter Thickness Thickness Diameter

of ResistanceCross- Diameter of of of Inner of Galv. of

at 20°Csection of wire Conductor Insulation covering Steel wire Sheath cable

mm² No./mm mm

cable

area (approx.) (approx.) (approx.) (approx.)

mm

(approx.)

kg/km

stranded

Ω/km

Sector Shape

mm mm

600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLES

Page - 38

mm

of

mm

Thickness

Nominal

diameter

Overall

Page 41: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 16.5 465 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 17.0 488 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 17.5 551 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 18.0 572 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 20.5 835 4.61

4 7 / 0.85 2.55 1.0 1.0 1.25 1.8 21.5 865 4.61

6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 22.5 1021 3.08

10 7 / 1.35 4.05 1.0 1.0 1.6 1.8 26.5 1479 1.83

16 7 / 1.70 5.10 1.0 1.0 1.60 1.8 29.0 1893 1.15

25 7 / 2.13 6.39 1.2 1.0 1.6 1.9 33.5 2577 0.727

35 7 / 2.52 7.56 1.2 1.0 2.0 2.0 38.0 3468 0.524

50 19 / 1.83 9.15 1.4 1.2 2.0 2.2 44.0 4503 0.387

kg/km Ω/kmmm mm mm mmmm² No./mm mm mm

cable at 20°C

area (approx.) (approx.) (approx.) (approx.) (approx.)

of Resistance

section of wire Conductor Insulation covering Steel wire Sheath cable

Weight Conductor

Cross- Diameter of of of Inner of Galv. of of

Thickness Diameter Thickness diameterNominal No./ Diameter Thickness

600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/SWA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNominal

Page - 39

Page 42: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

C Constructions :Conductor (Annealed Copper)

Insulation (PVC Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Inner Covering (PVC Compound)

Galvanized Flat Steel Wire armour

Galvanized Steel Tape binding

Outer sheath (PVC Compound)

600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (acc. to IEC 60502-1)

Page - 40

1

2

34

5

6

7

8

1

2

3

4

5

6

7

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 43: Catalogue LV 07

Section 2 - PVC Insulated CablesArmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 14.0 406 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 14.5 417 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 15.0 442 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 15.5 480 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 17.0 569 4.61

4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 17.5 584 4.61

6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 18.5 674 3.08

10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 20.5 826 1.83

16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 22.5 1040 1.15

25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 26.0 1365 0.727

35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.8 28.0 1672 0.524

50 19 / 1.83 9.15 1.4 1.0 0.8 0.3 1.8 32.0 2134 0.387

70 19 / 2.17 10.85 1.4 1.0 0.8 0.3 1.9 35.5 2691 0.268

95 19 / 2.52 12.60 1.6 1.2 0.8 0.3 2.1 41.0 3484 0.193

120 37 / 2.03 14.21 1.6 1.2 0.8 0.3 2.2 44.5 4149 0.153

150 37 / 2.27 15.89 1.8 1.2 0.8 0.3 2.3 49.0 4995 0.124

185 37 / 2.52 17.64 2.0 1.4 0.8 0.3 2.4 53.5 5968 0.0991

240 61 / 2.26 20.34 2.2 1.4 0.8 0.3 2.6 60.0 7540 0.0754

300 61 / 2.52 22.68 2.4 1.6 0.8 0.3 2.8 66.5 9178 0.0601

Minimumthicknessof Galv.

Steel tapemm

thicknessof Galv.

FlatSteel wire

Thicknessof Innercovering(approx.)

mm mm mm kg/kmmmmm

of wire Conductor

mm² No./mm mmarea (approx.) (approx.)

Insulation

ConductorCross- Diameter of of of of of section

Overall Maximum

(approx.)

Nominal No./ Diameter Thickness Weightdiameter

cable cable at 20°C(approx.)

Ω/km

Resistance

600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)

Thickness

Sheath

Conductor Nominal NominalNominal

Page - 41

Page 44: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 14.5 437 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 15.0 447 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 15.5 509 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 16.0 524 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 17.5 631 4.61

4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 18.0 649 4.61

6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 19.0 760 3.08

10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 21.5 982 1.83

16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 23.5 1230 1.15

25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 27.0 1685 0.727

35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.8 30.0 2089 0.524

50 6.8 1.4 1.0 0.8 0.3 1.9 28.5 2385 0.387

70 8.2 1.4 1.2 0.8 0.3 2.0 32.0 3149 0.268

95 9.7 1.6 1.2 0.8 0.3 2.2 37.0 4184 0.193

120 10.9 1.6 1.2 0.8 0.3 2.3 39.5 4902 0.153

150 11.9 1.8 1.4 0.8 0.3 2.4 43.0 5887 0.124

185 13.6 2.0 1.4 0.8 0.3 2.6 47.5 7212 0.0991

240 15.8 2.2 1.6 0.8 0.3 2.8 54.0 9457 0.0754

300 17.5 2.4 1.6 0.8 0.3 2.9 58.5 11517 0.0601

Minimumthicknessof Galv.

of Galv.

Ω/km

Sector Shape

mm mm mm(approx.)

mm² No./mm mm mm mm mm kg/kmarea (approx.) (approx.) (approx.)

Sheath cablecovering Flat(approx.) Steel wire Steel tape

cable at 20°C

Conductor Nominal Nominal OverallThickness thickness

of Inner

MaximumNominal No./ Diameter Thickness Thickness diameter Weight ConductorCross- Diameter of of of of of Resistancesection of wire Conductor Insulation

600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)

Nominal

Page - 42

stranded

Page 45: Catalogue LV 07

Section 2 - PVC Insulated CablesArmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 15.5 497 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 16.0 510 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 16.5 560 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 17.0 602 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 18.5 731 4.61

4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 19.5 754 4.61

6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 20.5 890 3.08

10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 23.0 1157 1.83

16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 25.5 1498 1.15

25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 29.5 2055 0.727

35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.9 32.5 2567 0.524

50 8.1 1.4 1.2 0.8 0.3 2.0 32.5 3041 0.387

70 9.7 1.4 1.2 0.8 0.3 2.1 36.0 3991 0.268

95 11.4 1.6 1.2 0.8 0.3 2.3 41.5 5307 0.193

120 12.9 1.6 1.4 0.8 0.3 2.4 45.0 6286 0.153

150 14.2 1.8 1.4 0.8 0.3 2.6 49.0 7567 0.124

185 16.0 2.0 1.6 0.8 0.3 2.7 54.5 9306 0.0991

240 18.2 2.2 1.6 0.8 0.3 3.0 60.5 12117 0.0754

300 20.6 2.4 1.6 0.8 0.3 3.2 66.5 14861 0.0601

Minimumthicknessof Galv.

Steel tape

Thickness thicknessof Inner of Galv.

600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNominal No./ Diameter Thickness Thickness diameter Weight ConductorCross- Diameter of of of of of Resistance

mm mmmm² No./mm

section of wire Conductor Insulationarea (approx.) (approx.) (approx.)

Sector Shape

mm mm

cable(approx.)

cableFlat Sheath

mm

covering

mm Ω/kmkg/km

Nominal

mm

at 20°C

Page - 43

stranded

(approx.) Steel wire

Page 46: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 16.5 538 12.1

1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 17.0 580 12.1

2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 17.5 635 7.41

2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 18.0 654 7.41

4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 20.0 832 4.61

4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 21.0 860 4.61

6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 22.0 1022 3.08

10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 25.0 1338 1.83

16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 27.5 1745 1.15

25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 32.0 2413 0.727

35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.9 35.5 3066 0.524

50 19 / 1.83 9.15 1.4 1.2 0.8 0.3 2.1 41.5 4013 0.387

thicknessof Galv.

Steel tapemm kg/km Ω/kmmm mm mm mmmm² No./mm mm mm

cable at 20°Carea (approx.) (approx.) (approx.) Steel wire (approx.) (approx.)

of Resistancesection of wire Conductor Insulation covering Flat Sheath cable

Weight ConductorCross- Diameter of of of Inner of Galv. of of

Thickness thickness Thickness diameterMinimumNominal No./ Diameter Thickness

600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNominal

Page - 44

Page 47: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (PVC Compound)

Inner Covering (PVC Compound)

Double Aluminium Tape armour

Outer sheath (PVC Compound)

Constructions :Conductor (Annealed Copper)

Insulation (PVC Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Inner Covering (PVC Compound)

Double Galvanized Steel Tape armour

Outer sheath (PVC Compound)

600/1000 V PVC INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DATA/PVC (acc. to IEC 60502-1)

600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (acc. to IEC 60502-1)

Page - 45

11

2

3

54

6

7

2

3

4

5

6

7

1

2

3

4

5

1

2

34

5

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 48: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Inner covering : PVC Compound Maximum 70°C

Armour : Double Aluminium tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black

Sheath - Black

SINGLE CORE

50 19 / 1.83 9.15 1.4 1.0 0.5 1.8 19.5 817 0.387

70 19 / 2.17 10.85 1.4 1.0 0.5 1.8 21.0 1045 0.268

95 19 / 2.52 12.60 1.6 1.0 0.5 1.8 23.5 1344 0.193

120 37 / 2.03 14.21 1.6 1.0 0.5 1.8 25.0 1607 0.153

150 37 / 2.27 15.89 1.8 1.0 0.5 1.8 27.0 1949 0.124

185 37 / 2.52 17.64 2.0 1.0 0.5 1.8 29.5 2339 0.0991

240 61 / 2.26 20.34 2.2 1.0 0.5 1.9 32.5 2987 0.0754

300 61 / 2.52 22.68 2.4 1.0 0.5 1.9 35.0 3628 0.0601

400 61 / 2.86 25.74 2.6 1.2 0.5 2.1 39.5 4638 0.0470

500 61 / 3.20 28.80 2.8 1.2 0.5 2.2 43.5 5694 0.0366

Thickness

Sheath

Conductor Nominal NominalWeightdiameter

Overall

600/1000 V PVC INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DATA/PVC (IEC 60502-1)

ofat 20°Ccable

Nominal No./ Diameter ThicknessMaximum

Ω/km

Resistance

kg/km

cable(approx.)

Insulation

Conductorof of of

Thicknessof Innercovering

(approx.)(approx.)

Cross- Diameter of

mmmm

section of wire Conductor

mm² No./mm mmarea (approx.)

Page - 46

(approx.)

Nominalthickness ofAluminium

tapemm mm mm

Page 49: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1 / 1.38 1.38 0.8 1.0 0.2 1.8 13.0 237 12.1

7 / 0.52 1.56 0.8 1.0 0.2 1.8 13.0 250 12.1

1 / 1.78 1.78 0.8 1.0 0.2 1.8 13.5 276 7.41

7 / 0.67 2.01 0.8 1.0 0.2 1.8 14.0 290 7.41

1 / 2.26 2.26 1.0 1.0 0.2 1.8 15.5 357 4.61

7 / 0.85 2.55 1.0 1.0 0.2 1.8 16.0 374 4.61

7 / 1.04 3.12 1.0 1.0 0.2 1.8 17.0 440 3.08

10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 19.0 574 1.83

16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 21.0 742 1.15

25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 24.5 1026 0.727

35 7 / 2.52 7.56 1.2 1.0 0.2 1.8 27.0 1290 0.524

50 19 / 1.83 9.15 1.4 1.0 0.2 1.8 31.0 1712 0.387

70 19 / 2.17 10.85 1.4 1.0 0.2 1.9 34.0 2262 0.268

95 19 / 2.52 12.60 1.6 1.2 0.2 2.1 39.0 2896 0.193

120 37 / 2.03 14.21 1.6 1.2 0.5 2.2 43.5 3921 0.153

150 37 / 2.27 15.89 1.8 1.2 0.5 2.3 48.0 4722 0.124

185 37 / 2.52 17.64 2.0 1.4 0.5 2.4 52.5 5675 0.0991

240 61 / 2.26 20.34 2.2 1.4 0.5 2.6 58.5 7166 0.0754

300 61 / 2.52 22.68 2.4 1.6 0.5 2.8 64.5 8710 0.0601

1.5

2.5

4

1.5

2.5

4

6

Thicknessof Galv.

Steel tape

Thicknessof Innercovering(approx.)

mm mm mm kg/kmmmmmmm² No./mm mmarea (approx.) (approx.)

of of of section of wire ConductorCross- Diameter of of

Maximum

(approx.)

Weightdiameter

cable cable at 20°C(approx.)

Conductor

Ω/km

Resistance

Conductor Nominal NominalNominal No./ Diameter Thickness

Overall

Insulation

600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (IEC 60502-1)

Thickness

Sheath

Nominal

Page - 47

Page 50: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1 / 1.38 1.38 0.8 1.0 0.2 1.8 13.5 270 12.1

7 / 0.52 1.56 0.8 1.0 0.2 1.8 13.5 281 12.1

1 / 1.78 1.78 0.8 1.0 0.2 1.8 14.0 318 7.41

7 / 0.67 2.01 0.8 1.0 0.2 1.8 14.5 335 7.41

1 / 2.26 2.26 1.0 1.0 0.2 1.8 16.0 420 4.61

7 / 0.85 2.55 1.0 1.0 0.2 1.8 16.5 441 4.61

7 / 1.04 3.12 1.0 1.0 0.2 1.8 18.0 530 3.08

10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 20.0 707 1.83

16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 22.0 935 1.15

25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 26.0 1328 0.727

35 7 / 2.52 7.56 1.2 1.0 0.2 1.8 28.5 1685 0.524

50 6.8 1.4 1.0 0.2 1.9 27.0 2002 0.387

70 8.2 1.4 1.2 0.2 2.0 30.5 2724 0.268

95 9.7 1.6 1.2 0.5 2.2 36.5 4062 0.193

120 10.9 1.6 1.2 0.5 2.3 39.5 4765 0.153

150 11.9 1.8 1.4 0.5 2.4 42.5 5745 0.124

185 13.6 2.0 1.4 0.5 2.6 47.5 7055 0.0991

240 15.8 2.2 1.6 0.5 2.8 53.5 9254 0.0754

300 17.5 2.4 1.6 0.5 2.9 58.0 11299 0.0601

1.5

2.5

mm² No./mm

Three-

Segmental

Stranded

1.5

2.5

4

6

4

Thickness Thicknessof Inner of Galv.

Ω/kmmm mm(approx.)

mm mm kg/km(approx.)(approx.)

mm mmarea (approx.) (approx.)

Sheath cablecovering Steel tape cable at 20°C

Conductor Nominal Nominal Overall Maximum

Cross-Nominal No./ Diameter Thickness Thickness diameter Weight Conductor

of Resistancesection of wire Conductor Insulation

Diameter of of of of

600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (IEC 60502-1)

Nominal

Page - 48

Page 51: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1 / 1.38 1.38 0.8 1.0 0.2 1.8 14.0 307 12.1

7 / 0.52 1.56 0.8 1.0 0.2 1.8 14.5 322 12.1

1 / 1.78 1.78 0.8 1.0 0.2 1.8 15.0 372 7.41

7 / 0.67 2.01 0.8 1.0 0.2 1.8 15.5 390 7.41

1 / 2.26 2.26 1.0 1.0 0.2 1.8 17.5 499 4.61

7 / 0.85 2.55 1.0 1.0 0.2 1.8 18.0 524 4.61

7 / 1.04 3.12 1.0 1.0 0.2 1.8 19.0 638 3.08

10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 21.5 860 1.83

16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 24.0 1158 1.15

25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 28.0 1650 0.727

35 7 / 2.52 7.56 1.2 1.0 0.2 1.8 31.0 2120 0.524

50 8.1 1.4 1.2 0.2 2.0 31.0 2592 0.387

70 9.7 1.4 1.2 0.5 2.1 36.0 3862 0.268

95 11.4 1.6 1.2 0.5 2.3 41.0 5171 0.193

120 12.9 1.6 1.4 0.5 2.4 44.5 6122 0.153

150 14.2 1.8 1.4 0.5 2.6 49.0 7405 0.124

185 16.0 2.0 1.6 0.5 2.7 54.0 9113 0.0991

240 18.2 2.2 1.6 0.5 3.0 60.0 11899 0.0754

300 20.6 2.4 1.6 0.5 3.2 66.5 14624 0.0601

1.5

4

2.5

Segmental

Stranded

Four-

600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (IEC 60502-1)

ConductorThickness

Cross-section

Thicknessof Inner of Galv.

Nominal Overall MaximumNominal No./ Diameter Thickness Thickness diameter Weight Conductor

Nominal

Diameter of of of of of Resistancecable at 20°Cof wire Conductor Insulation covering Steel tape

(approx.) (approx.)Sheath cable

(approx.) (approx.)mm² No./mm mm mm mm mm kg/kmarea (approx.)

Ω/kmmm mm

1.5

2.5

4

6

Nominal

Page - 49

Page 52: Catalogue LV 07

Section 2 - PVC Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : PVC Compound type A Operating Temperature

Filler : Suitable material Maximum 70°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST1

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1 / 1.38 1.38 0.8 1.0 0.2 1.8 15.0 350 12.1

7 / 0.52 1.56 0.8 1.0 0.2 1.8 15.5 368 12.1

1 / 1.78 1.78 0.8 1.0 0.2 1.8 16.0 424 7.41

7 / 0.67 2.01 0.8 1.0 0.2 1.8 16.5 446 7.41

1 / 2.26 2.26 1.0 1.0 0.2 1.8 18.5 578 4.61

7 / 0.85 2.55 1.0 1.0 0.2 1.8 19.5 609 4.61

7 / 1.04 3.12 1.0 1.0 0.2 1.8 20.5 748 3.08

10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 23.5 1022 1.83

16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 26.0 1386 1.15

25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 30.5 1991 0.727

35 7 / 2.52 7.56 1.2 1.0 0.2 1.9 34.0 2577 0.524

50 19 / 1.83 9.15 1.4 1.2 0.2 2.1 40.0 3400 0.387

1.5

4

2.5

1.5

2.5

mm²area

4

6

Nominal Maximum

600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLES

No./ Diameter Thickness Thickness Thickness Thickness diameter Weight ConductorCross- Diameter of of of Inner of Galv. of of of Resistancesection of wire Conductor Insulation covering Steel tape Sheath cable cable

(approx.) (approx.) (approx.)mm mm kg/km

at 20°C(approx.) (approx.)

Nominal

PVC/DSTA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall

Page - 50

Ω/kmmm mm mm mmNo./mm

Page 53: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (XLPE Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

Page - 51

1

2

3

4

5

1

23

4

5

2

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 54: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Sheath : PVC Compound type ST2 Maximum 90°C

Colour Ident. : Insulation - Black

Sheath - Black

SINGLE CORE

1.5 1 / 1.38 1.38 0.7 1.4 6.0 49 12.1

1.5 7 / 0.52 1.56 0.7 1.4 6.5 51 12.1

2.5 1 / 1.78 1.78 0.7 1.4 6.5 62 7.41

2.5 7 / 0.67 2.01 0.7 1.4 7.0 64 7.41

4 1 / 2.26 2.26 0.7 1.4 7.0 80 4.61

4 7 / 0.85 2.55 0.7 1.4 7.5 83 4.61

6 7 / 1.04 3.12 0.7 1.4 8.0 106 3.08

10 7 / 1.35 4.05 0.7 1.4 9.0 152 1.83

16 4.7 0.7 1.4 9.5 206 1.15

25 5.9 0.9 1.4 11.0 302 0.727

35 7.1 0.9 1.4 12.0 399 0.524

50 8.1 1.0 1.4 13.5 518 0.387

70 9.7 1.1 1.4 15.0 721 0.268

95 11.6 1.1 1.5 17.5 979 0.193

120 12.9 1.2 1.5 19.0 1212 0.153

150 14.3 1.4 1.6 21.0 1502 0.124

185 16.0 1.6 1.6 23.0 1854 0.0991

240 18.3 1.7 1.7 26.0 2406 0.0754

300 20.7 1.8 1.8 28.5 2996 0.0601

400 23.4 2.0 1.9 32.0 3799 0.0470

500 26.5 2.2 2.0 35.5 4842 0.0366

630 30.3 2.4 2.2 40.0 6233 0.0283

800 34.3 2.6 2.3 45.0 7933 0.0221

1000 127 / 3.2 41.6 2.8 2.4 53.0 10109 0.0176

round

stranded

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

cable at 20°C

(approx.)

mmmm

Thickness diameter

Sheath cable

Maximum

Weight Conductor

of of

Conductor Nominal Nominal Overall

Nominal No./ Diameter Thickness

Cross- Diameter of of

Insulation

of Resistance

(approx.) (approx.)

mm² No./mm mm

section of wire Conductor

Page - 52

area (approx.)

kg/km Ω/kmmm

Compact

Page 55: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.7 1.8 10.0 116 12.1

1.5 7 / 0.52 1.56 0.7 1.8 10.5 121 12.1

2.5 1 / 1.78 1.78 0.7 1.8 11.0 145 7.41

2.5 7 / 0.67 2.01 0.7 1.8 11.5 150 7.41

4 1 / 2.26 2.26 0.7 1.8 12.0 188 4.61

4 7 / 0.85 2.55 0.7 1.8 12.5 196 4.61

6 7 / 1.04 3.12 0.7 1.8 13.5 246 3.08

10 7 / 1.35 4.05 0.7 1.8 15.5 352 1.83

16 4.7 0.7 1.8 17.0 468 1.15

25 5.9 0.9 1.8 20.0 684 0.727

35 7.1 0.9 1.8 22.5 899 0.524

50 8.1 1.0 1.8 25.0 1162 0.387

70 9.7 1.1 1.8 28.5 1607 0.268

95 11.6 1.1 2.0 32.5 2185 0.193

120 12.9 1.2 2.1 36.0 2709 0.153

150 14.3 1.4 2.2 39.5 3350 0.124

185 16.0 1.6 2.3 44.5 4152 0.0991

240 18.3 1.7 2.5 50.0 5382 0.0754

300 20.7 1.8 2.7 55.5 6711 0.0601

400 23.4 2.0 2.9 62.0 8494 0.0470

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

Thickness

Sheath

Conductor Nominal Nominal

Weightdiameter

cable cable at 20°C

(approx.)

Ω/km

Resistance

Nominal No./ Diameter Thickness

Overall Maximum

(approx.)

Insulation

Conductor

Cross- Diameter of of of of of

section of wire Conductor

mm² No./mm mm

area (approx.) (approx.)

mm mm mm kg/km

Compact

round

stranded

Page - 53

Page 56: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.7 1.8 10.5 139 12.1

1.5 7 / 0.52 1.56 0.7 1.8 11.0 145 12.1

2.5 1 / 1.78 1.78 0.7 1.8 11.5 175 7.41

2.5 7 / 0.67 2.01 0.7 1.8 12.0 183 7.41

4 1 / 2.26 2.26 0.7 1.8 12.5 234 4.61

4 7 / 0.85 2.55 0.7 1.8 13.5 243 4.61

6 7 / 1.04 3.12 0.7 1.8 14.5 314 3.08

10 7 / 1.35 4.05 0.7 1.8 16.5 458 1.83

16 4.7 0.7 1.8 18.0 626 1.15

25 5.9 0.9 1.8 21.0 928 0.727

35 7.1 0.9 1.8 24.0 1232 0.524

50 8.1 1.0 1.8 26.5 1605 0.387

70 9.7 1.1 1.9 30.5 2251 0.268

95 11.6 1.1 2.0 35.0 3051 0.193

120 12.9 1.2 2.1 38.0 3799 0.153

150 14.3 1.4 2.3 42.5 4720 0.124

185 16.0 1.6 2.4 47.5 5862 0.0991

240 18.3 1.7 2.6 53.5 7618 0.0754

300 20.7 1.8 2.8 59.5 9494 0.0601

400 23.4 2.0 3.1 67.0 12111 0.0470

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

section of wire Conductor Insulation

of of of ResistanceCross- Diameter of of

Thickness diameter Weight ConductorNominal No./ Diameter Thickness

MaximumConductor Nominal Nominal Overall

Sheath cable cable at 20°C

Ω/km

Compact

round

stranded

mm kg/kmNo./mm mm mm

(approx.)

mm²

Page - 54

area (approx.) (approx.) (approx.)

mm

Page 57: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.7 1.8 11.5 162 12.1

1.5 7 / 0.52 1.56 0.7 1.8 12.0 170 12.1

2.5 1 / 1.78 1.78 0.7 1.8 12.5 215 7.41

2.5 7 / 0.67 2.01 0.7 1.8 13.0 224 7.41

4 1 / 2.26 2.26 0.7 1.8 13.5 286 4.61

4 7 / 0.85 2.55 0.7 1.8 14.5 298 4.61

6 7 / 1.04 3.12 0.7 1.8 15.5 391 3.08

10 7 / 1.35 4.05 0.7 1.8 18.0 576 1.83

16 4.7 0.7 1.8 19.5 796 1.15

25 5.9 0.9 1.8 23.5 1190 0.727

35 7.1 0.9 1.8 26.0 1584 0.524

50 8.1 1.0 1.9 29.5 2091 0.387

70 9.7 1.1 2.0 34.0 2940 0.268

95 11.6 1.1 2.1 38.5 3997 0.193

120 12.9 1.2 2.3 42.5 4995 0.153

150 14.3 1.4 2.4 47.0 6184 0.124

185 16.0 1.6 2.6 53.0 7700 0.0991

240 18.3 1.7 2.8 59.5 9999 0.0754

300 20.7 1.8 3.0 66.5 12495 0.0601

Ω/km

Compact

round

stranded

(approx.)

mm² No./mm mm mm mm mm kg/km

area (approx.) (approx.) (approx.)

Sheath cable cable at 20°Csection of wire Conductor Insulation

of of of ResistanceCross- Diameter of of

Thickness diameter Weight ConductorNominal No./ Diameter Thickness

XLPE/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 55

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES

Page 58: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.7 1.8 12.5 192 12.1

1.5 7 / 0.52 1.56 0.7 1.8 13.0 200 12.1

2.5 1 / 1.78 1.78 0.7 1.8 13.5 251 7.41

2.5 7 / 0.67 2.01 0.7 1.8 14.0 261 7.41

4 1 / 2.26 2.26 0.7 1.8 15.0 344 4.61

4 7 / 0.85 2.55 0.7 1.8 15.5 358 4.61

6 7 / 1.04 3.12 0.7 1.8 17.0 469 3.08

10 7 / 1.35 4.05 0.7 1.8 19.5 696 1.83

16 4.7 0.7 1.8 21.0 974 1.15

25 5.9 0.9 1.8 25.5 1234 0.727

35 7.1 0.9 1.8 29.0 1950 0.524

50 8.1 1.0 2.0 32.5 2590 0.387

Ω/km

stranded

round

Compact

(approx.)

mm² No./mm mm mm mm mm kg/km

area (approx.) (approx.) (approx.)

Sheath cable cable at 20°Csection of wire Conductor Insulation

of of of ResistanceCross- Diameter of of

Thickness diameter Weight ConductorNominal No./ Diameter Thickness

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 56

Page 59: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 clas 1) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler (if necessary) : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 1.5 mm² (Solid conductor)

No Nominal of Cross-section

core area

mm²

6 1.5 1 / 1.38 1.38 0.7 1.8 13.0 214 12.1

7 1.5 1 / 1.38 1.38 0.7 1.8 13.0 229 12.1

8 1.5 1 / 1.38 1.38 0.7 1.8 14.0 256 12.1

9 1.5 1 / 1.38 1.38 0.7 1.8 15.0 286 12.1

10 1.5 1 / 1.38 1.38 0.7 1.8 16.0 316 12.1

12 1.5 1 / 1.38 1.38 0.7 1.8 16.5 358 12.1

14 1.5 1 / 1.38 1.38 0.7 1.8 17.5 400 12.1

15 1.5 1 / 1.38 1.38 0.7 1.8 18.0 426 12.1

16 1.5 1 / 1.38 1.38 0.7 1.8 18.5 448 12.1

18 1.5 1 / 1.38 1.38 0.7 1.8 19.0 488 12.1

19 1.5 1 / 1.38 1.38 0.7 1.8 19.0 502 12.1

20 1.5 1 / 1.38 1.38 0.7 1.8 19.5 532 12.1

24 1.5 1 / 1.38 1.38 0.7 1.8 22.0 628 12.1

30 1.5 1 / 1.38 1.38 0.7 1.8 23.5 748 12.1

32 1.5 1 / 1.38 1.38 0.7 1.8 24.0 793 12.1

37 1.5 1 / 1.38 1.38 0.7 1.8 25.0 888 12.1

40 1.5 1 / 1.38 1.38 0.7 1.8 26.0 953 12.1

50 1.5 1 / 1.38 1.38 0.7 1.9 29.0 1178 12.1

52 1.5 1 / 1.38 1.38 0.7 1.9 29.5 1221 12.1

60 1.5 1 / 1.38 1.38 0.7 1.9 31.5 1384 12.1

61 1.5 1 / 1.38 1.38 0.7 1.9 31.5 1398 12.1

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall MaximumNo./ Diameter Thickness Thickness

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

Conductorof of Resistance

diameter Weight

cable(approx.) (approx.) (approx.) (approx.)

Page - 57

kg/km Ω/kmNo./mm mm mm mm mm

Page 60: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 clas 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler (if necessary) : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 1.5 mm² (Stranded conductor)

No Nominal of Cross-section

core area

mm²

6 1.5 7 / 0.52 1.56 0.7 1.8 14.0 224 12.1

7 1.5 7 / 0.52 1.56 0.7 1.8 14.0 239 12.1

8 1.5 7 / 0.52 1.56 0.7 1.8 15.0 269 12.1

9 1.5 7 / 0.52 1.56 0.7 1.8 16.0 300 12.1

10 1.5 7 / 0.52 1.56 0.7 1.8 17.0 331 12.1

12 1.5 7 / 0.52 1.56 0.7 1.8 17.5 374 12.1

14 1.5 7 / 0.52 1.56 0.7 1.8 18.5 418 12.1

15 1.5 7 / 0.52 1.56 0.7 1.8 19.0 447 12.1

16 1.5 7 / 0.52 1.56 0.7 1.8 19.0 468 12.1

18 1.5 7 / 0.52 1.56 0.7 1.8 20.0 511 12.1

19 1.5 7 / 0.52 1.56 0.7 1.8 20.0 526 12.1

20 1.5 7 / 0.52 1.56 0.7 1.8 21.0 557 12.1

24 1.5 7 / 0.52 1.56 0.7 1.8 23.5 657 12.1

30 1.5 7 / 0.52 1.56 0.7 1.8 24.5 786 12.1

32 1.5 7 / 0.52 1.56 0.7 1.8 25.0 830 12.1

37 1.5 7 / 0.52 1.56 0.7 1.8 26.5 928 12.1

40 1.5 7 / 0.52 1.56 0.7 1.8 27.5 997 12.1

50 1.5 7 / 0.52 1.56 0.7 1.9 30.5 1232 12.1

52 1.5 7 / 0.52 1.56 0.7 1.9 31.5 1276 12.1

60 1.5 7 / 0.52 1.56 0.7 1.9 33.0 1447 12.1

61 1.5 7 / 0.52 1.56 0.7 1.9 33.0 1462 12.1

kg/km Ω/kmNo./mm mm mm mm mm

cable(approx.) (approx.) (approx.) (approx.)

Conductorof of Resistance

diameter Weight

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

No./ Diameter Thickness Thickness

XLPE/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 58

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES

Page 61: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler (if necessary) : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 2.5 mm² (Solid conductor)

No Nominal of Cross-section

core area

mm²

6 2.5 1 / 1.78 1.78 0.7 1.8 14.5 284 7.41

7 2.5 1 / 1.78 1.78 0.7 1.8 14.5 307 7.41

8 2.5 1 / 1.78 1.78 0.7 1.8 15.5 348 7.41

9 2.5 1 / 1.78 1.78 0.7 1.8 16.5 389 7.41

10 2.5 1 / 1.78 1.78 0.7 1.8 18.0 431 7.41

12 2.5 1 / 1.78 1.78 0.7 1.8 18.5 490 7.41

14 2.5 1 / 1.78 1.78 0.7 1.8 19.0 558 7.41

15 2.5 1 / 1.78 1.78 0.7 1.8 19.5 590 7.41

16 2.5 1 / 1.78 1.78 0.7 1.8 20.0 622 7.41

18 2.5 1 / 1.78 1.78 0.7 1.8 21.0 684 7.41

19 2.5 1 / 1.78 1.78 0.7 1.8 21.0 707 7.41

20 2.5 1 / 1.78 1.78 0.7 1.8 22.0 754 7.41

24 2.5 1 / 1.78 1.78 0.7 1.8 24.5 887 7.41

30 2.5 1 / 1.78 1.78 0.7 1.8 26.0 1070 7.41

32 2.5 1 / 1.78 1.78 0.7 1.8 26.5 1131 7.41

37 2.5 1 / 1.78 1.78 0.7 1.8 28.0 1276 7.41

40 2.5 1 / 1.78 1.78 0.7 1.9 29.0 1386 7.41

50 2.5 1 / 1.78 1.78 0.7 2.0 32.5 1714 7.41

52 2.5 1 / 1.78 1.78 0.7 2.0 33.0 1782 7.41

60 2.5 1 / 1.78 1.78 0.7 2.0 35.0 2024 7.41

61 2.5 1 / 1.78 1.78 0.7 2.0 35.0 2046 7.41

(approx.)mm kg/km Ω/km

(approx.) (approx.) (approx.)No./mm mm mm mm

Resistanceof wire Conductor Insulation Sheath cable cable at 20°C

Diameterof of Diameter of of of

Thickness

Page - 59

Overalldiameter Weight ConductorThickness

Nominal NominalNo./

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

MaximumConductor

Page 62: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler (if necessary) : Suitable material Maximum 90°C

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

CONTROL CABLE : 2.5 mm² (Stranded conductor)

No Nominal of Cross-section

core area

mm²

6 2.5 7 / 0.67 2.01 0.7 1.8 15.0 296 7.41

7 2.5 7 / 0.67 2.01 0.7 1.8 15.0 320 7.41

8 2.5 7 / 0.67 2.01 0.7 1.8 16.0 362 7.41

9 2.5 7 / 0.67 2.01 0.7 1.8 17.0 405 7.41

10 2.5 7 / 0.67 2.01 0.7 1.8 18.5 449 7.41

12 2.5 7 / 0.67 2.01 0.7 1.8 19.0 510 7.41

14 2.5 7 / 0.67 2.01 0.7 1.8 20.0 580 7.41

15 2.5 7 / 0.67 2.01 0.7 1.8 20.5 614 7.41

16 2.5 7 / 0.67 2.01 0.7 1.8 21.0 647 7.41

18 2.5 7 / 0.67 2.01 0.7 1.8 22.0 712 7.41

19 2.5 7 / 0.67 2.01 0.7 1.8 22.0 736 7.41

20 2.5 7 / 0.67 2.01 0.7 1.8 23.0 784 7.41

24 2.5 7 / 0.67 2.01 0.7 1.8 26.0 923 7.41

30 2.5 7 / 0.67 2.01 0.7 1.8 27.5 1114 7.41

32 2.5 7 / 0.67 2.01 0.7 1.8 28.0 1177 7.41

37 2.5 7 / 0.67 2.01 0.7 1.8 29.5 1328 7.41

40 2.5 7 / 0.67 2.01 0.7 1.9 30.5 1443 7.41

50 2.5 7 / 0.67 2.01 0.7 2.0 34.0 1784 7.41

52 2.5 7 / 0.67 2.01 0.7 2.0 35.0 1854 7.41

60 2.5 7 / 0.67 2.01 0.7 2.0 37.0 2105 7.41

61 2.5 7 / 0.67 2.01 0.7 2.0 37.0 2129 7.41

kg/km Ω/kmNo./mm mm mm mm mm

cable(approx.) (approx.) (approx.) (approx.)

Conductorof of Resistance

diameter Weight

at 20°CDiameter of of of

of wire Conductor Insulation Sheath cable

No./ Diameter Thickness Thickness

600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 60

Page 63: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (XLPE Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Copper Tape screen

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESXLPE/PVC-S (IEC 60502-1)

Page - 61

1

2

3

6

7

4

12

3

4

5

6

7

5

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Copper wire screen.* Polyethylene / Low smoke Halogen Free sheathed

Page 64: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.7 0.1 1.8 10.0 125 12.1

1.5 7 / 0.52 1.56 0.7 0.1 1.8 10.5 131 12.1

2.5 1 / 1.78 1.78 0.7 0.1 1.8 11.0 155 7.41

2.5 7 / 0.67 2.01 0.7 0.1 1.8 11.5 162 7.41

4 1 / 2.26 2.26 0.7 0.1 1.8 12.0 200 4.61

4 7 / 0.85 2.55 0.7 0.1 1.8 12.5 209 4.61

6 1 / 2.77 2.77 0.7 0.1 1.8 13.0 250 3.08

6 7 / 1.04 3.12 0.7 0.1 1.8 13.5 261 3.08

10 7 / 1.35 4.05 0.7 0.1 1.8 15.5 369 1.83

16 4.7 0.7 0.1 1.8 16.5 489 1.15

25 5.9 0.9 0.1 1.8 20.0 712 0.727

35 7.1 0.9 0.1 1.8 22.5 934 0.524

50 8.1 1.0 0.1 1.8 24.5 1196 0.387

70 9.7 1.1 0.1 1.9 28.5 1648 0.268

95 11.6 1.1 0.1 2.0 32.5 2226 0.193

120 12.9 1.2 0.1 2.1 35.5 2753 0.153

150 14.3 1.4 0.1 2.2 39.5 3394 0.124

185 16.0 1.6 0.1 2.3 44.0 4205 0.0991

240 18.3 1.7 0.1 2.5 49.5 5425 0.0754

300 20.7 1.8 0.1 2.7 55.0 6752 0.0601

400 23.4 2.0 0.1 2.9 61.5 8543 0.0470

round

kg/kmmm mm

Sheath

mm

Insulation

(approx.)

Copper tape

mm

cable

Page - 62

Resistance

(approx.)

at 20°Ccable

of

Ω/km

Conductorsection area of wire

(approx.) (approx.)

mm² No./mm

Compact

600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLES

Diameter

Nominal

Thickness

Overall

diameter

Conductor Maximum

Conductor

Nominal

No./

Diameter

Thickness

Nominal

Thickness

of ofof

mm

stranded

XLPE/PVC-S (IEC 60502-1)

Nominal Weight

ofofCross-

(approx.)

Page 65: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow , Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.7 0.1 1.8 10.5 149 12.1

1.5 7 / 0.52 1.56 0.7 0.1 1.8 11.0 155 12.1

2.5 1 / 1.78 1.78 0.7 0.1 1.8 11.5 186 7.41

2.5 7 / 0.67 2.01 0.7 0.1 1.8 12.0 195 7.41

4 1 / 2.26 2.26 0.7 0.1 1.8 12.5 246 4.61

4 7 / 0.85 2.55 0.7 0.1 1.8 13.0 257 4.61

6 1 / 2.77 2.77 0.7 0.1 1.8 13.5 318 3.08

6 7 / 1.04 3.12 0.7 0.1 1.8 14.0 330 3.08

10 7 / 1.35 4.05 0.7 0.1 1.8 16.5 478 1.83

16 4.7 0.7 0.1 1.8 17.5 650 1.15

25 5.9 0.9 0.1 1.8 21.0 959 0.727

35 7.1 0.9 0.1 1.8 23.5 1273 0.524

50 8.1 1.0 0.1 1.8 26.5 1642 0.387

70 9.7 1.1 0.1 1.9 30.0 2282 0.268

95 11.6 1.1 0.1 2.0 34.5 3106 0.193

120 12.9 1.2 0.1 2.2 38.0 3868 0.153

150 14.3 1.4 0.1 2.3 42.0 4775 0.124

185 16.0 1.6 0.1 2.4 47.0 5907 0.0991

240 18.3 1.7 0.1 2.6 53.0 7673 0.0754

300 20.7 1.8 0.1 2.8 59.0 9561 0.0601

400 23.4 2.0 0.1 3.1 66.0 12110 0.0470

Compact

(approx.) (approx.)

mm

round

No./mm

stranded

(approx.)

cable

Thickness

of

Copper tape

(approx.)

cable at 20°Csection area of wire Conductor Insulation Sheath

600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLES

Cross- Diameter of of of Resistanceof

NominalNominal MaximumOverall

diameterNo./ Diameter Thickness

mm²

(approx.)

Thickness

Conductor Nominal

Nominal

XLPE/PVC-S (IEC 60502-1)

mm Ω/kmkg/kmmm mm

Weight Conductor

of

mm

Page - 63

Page 66: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow , Blue , Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.7 0.1 1.8 11.5 173 12.1

1.5 7 / 0.52 1.56 0.7 0.1 1.8 12.0 182 12.1

2.5 1 / 1.78 1.78 0.7 0.1 1.8 12.5 228 7.41

2.5 7 / 0.67 2.01 0.7 0.1 1.8 13.0 237 7.41

4 1 / 2.26 2.26 0.7 0.1 1.8 13.5 300 4.61

4 7 / 0.85 2.55 0.7 0.1 1.8 14.0 318 4.61

6 1 / 2.77 2.77 0.7 0.1 1.8 14.5 394 3.08

6 7 / 1.04 3.12 0.7 0.1 1.8 15.5 409 3.08

10 7 / 1.35 4.05 0.7 0.1 1.8 18.0 598 1.83

16 4.7 0.7 0.1 1.8 19.5 823 1.15

25 5.9 0.9 0.1 1.8 23.0 1227 0.727

35 7.1 0.9 0.1 1.8 26.0 1632 0.524

50 8.1 1.0 0.1 1.9 29.0 2120 0.387

70 9.7 1.1 0.1 2.0 33.5 2976 0.268

95 11.6 1.1 0.1 2.2 38.5 4073 0.193

120 12.9 1.2 0.1 2.3 42.5 5052 0.153

150 14.3 1.4 0.1 2.5 47.0 6243 0.124

185 16.0 1.6 0.1 2.6 52.5 7751 0.0991

240 18.3 1.7 0.1 2.8 59.0 10066 0.0754

300 20.7 1.8 0.1 3.0 65.5 12547 0.0601

400 23.4 2.0 0.1 3.3 73.5 15898 0.0470

(approx.)(approx.) (approx.) (approx.)

Compact

round

stranded

Thickness

Conductor Nominal Nominal

of

Thickness Weight

cable

mmmm kg/km Ω/kmmmmm² No./mm mm mm

at 20°Csection area of wire Conductor Insulation Sheath cableCopper tape

of of

Thickness

Resistance

diameter

Diameter of of of

600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESXLPE/PVC-S (IEC 60502-1)

Page - 64

No./ DiameterNominal

(approx.)

Overall MaximumNominal

Conductor

Cross-

Page 67: Catalogue LV 07

Section 3 - XLPE Insulated Cables Unarmoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Metallic screen : Annealed Copper tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.7 0.1 1.8 12.0 204 12.1

1.5 7 / 0.52 1.56 0.7 0.1 1.8 12.5 214 12.1

2.5 1 / 1.78 1.78 0.7 0.1 1.8 13.5 265 7.41

2.5 7 / 0.67 2.01 0.7 0.1 1.8 14.0 276 7.41

4 1 / 2.26 2.26 0.7 0.1 1.8 14.5 360 4.61

4 7 / 0.85 2.55 0.7 0.1 1.8 15.5 376 4.61

6 1 / 2.77 2.77 0.7 0.1 1.8 16.0 471 3.08

6 7 / 1.04 3.12 0.7 0.1 1.8 17.0 488 3.08

10 7 / 1.35 4.05 0.7 0.1 1.8 19.5 720 1.83

16 4.7 0.7 0.1 1.8 21.0 1005 1.15

25 5.9 0.9 0.1 1.8 25.5 1491 0.727

35 7.1 0.9 0.1 1.9 28.5 2005 0.524

50 8.1 1.0 0.1 2.0 32.0 2620 0.387

(approx.)

600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESXLPE/PVC-S (IEC 60502-1)

Nominal

(approx.)

round

No./

Compact

Copper tape

mm

stranded

Conductor

mm² No./mm mm

Cross- Diameter of

Nominal

Maximum

Conductor

cable at 20°C

of Resistance

Weight

(approx.)

of of

Thickness

Overall

Sheath cable

Thickness diameter

mm

section area of wire Conductor Insulation

(approx.)

mm mm kg/km Ω/km

of

Diameter Thickness

Nominal Nominal

of

Page - 65

(approx.)

Page 68: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (XLPE Compound)

Inner Covering (PVC Compound)

Round Aluminium Wire armour

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

Constructions :Conductor (Annealed Copper)

Insulation (XLPE Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Inner Covering (PVC Compound)

Galvanized Round Steel Wire armour

Binding tape (Manufacturer's option)

Outer sheath (PVC Compound)

600/1000 V XLPE INSULATED, ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/AWA/PVC (acc. to IEC 60502-1)

600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (acc. to IEC 60502-1)

Page - 66

1

2

3

4

5

6

7

1

2

3

4

5

1

2

3

4

6

1

2

3

5

4

6

7

88

6

5

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 69: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Inner covering : PVC Compound Maximum 90°C

Armour : Aluminium Wire

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black

Sheath - Black

SINGLE CORE

16 4.7 0.7 1.0 0.8 1.8 13.5 325 1.15

25 5.9 0.9 1.0 0.8 1.8 15.5 435 0.727

35 7.1 0.9 1.0 0.8 1.8 16.5 545 0.524

50 8.1 1.0 1.0 1.25 1.8 18.5 715 0.387

70 9.7 1.1 1.0 1.25 1.8 20.0 940 0.268

95 11.6 1.1 1.0 1.25 1.8 22.0 1215 0.193

120 12.9 1.2 1.0 1.6 1.8 24.5 1565 0.153

150 14.3 1.4 1.0 1.6 1.8 26.5 1865 0.124

185 16.0 1.6 1.0 1.6 1.8 28.5 2270 0.0991

240 18.3 1.7 1.0 1.6 1.9 31.0 2860 0.0754

300 20.7 1.8 1.0 1.6 1.9 34.0 3490 0.0601

400 23.4 2.0 1.2 2.0 2.1 38.5 4385 0.0470

500 26.5 2.2 1.2 2.0 2.2 42.0 5485 0.0366

630 30.3 2.4 1.2 2.0 2.3 46.5 6930 0.0283

800 34.3 2.6 1.4 2.5 2.5 52.5 8915 0.0221

1000 Round stranded 41.6 2.8 1.4 2.5 2.5 60.5 11315 0.0176

Compact

round

stranded

600/1000 V XLPE INSULATED, ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/AWA/PVC (IEC 60502-1)

Thickness

Sheath

Conductor Nominal Nominal

Weightdiameter

cable cable

Overall

mmmm mm mm

(approx.)

Ω/km

Resistance

kg/km

of

of wire Conductor at 20°C

Nominal No./ Diameter Thickness

Maximum

(approx.)

Insulation

Conductor

of of of

Thickness

of Inner

covering

No./mm mm

area (approx.) (approx.)

Cross- Diameter of

section

Page - 67

(approx.)

Nominal

diameter of

Aluminium

wire

mmmm²

Page 70: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 13.5 314 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 14.0 325 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 14.5 355 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 15.0 372 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 1.8 15.5 422 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 1.8 16.0 437 4.61

6 1 / 2.77 2.77 0.7 1.0 0.8 1.8 16.5 485 3.08

6 7 / 1.04 3.12 0.7 1.0 0.8 1.8 17.0 511 3.08

10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 20.0 757 1.83

16 4.7 0.7 1.0 1.25 1.8 21.0 907 1.15

25 5.9 0.9 1.0 1.6 1.8 25.0 1342 0.727

35 7.1 0.9 1.0 1.6 1.8 27.5 1630 0.524

50 8.1 1.0 1.0 1.6 1.8 30.0 1965 0.387

70 9.7 1.1 1.0 1.6 2.0 34.0 2549 0.268

95 11.6 1.1 1.2 2.0 2.1 39.0 3517 0.193

120 12.9 1.2 1.2 2.0 2.2 42.0 4159 0.153

150 14.3 1.4 1.2 2.0 2.3 46.0 4966 0.124

185 16.0 1.6 1.4 2.5 2.5 52.0 6435 0.0991

240 18.3 1.7 1.4 2.5 2.7 57.5 7894 0.0754

300 20.7 1.8 1.6 2.5 2.8 63.0 9543 0.0601

Nominal

diameter

of

Steel wire

Thickness

of Inner

covering

(approx.)

Compact

round

stranded

mm mm mm kg/kmmmmm

of wire Conductor

mm² No./mm mm

area (approx.) (approx.)

Insulation

Conductor

Cross- Diameter of of of of of

section

Overall Maximum

(approx.)

Nominal No./ Diameter Thickness Weightdiameter

cable cable at 20°C

(approx.)

Ω/km

Resistance

600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)

Thickness

Sheath

Conductor Nominal Nominal

Page - 68

Page 71: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 14.0 343 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 14.5 360 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 15.0 398 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 15.5 417 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 1.8 16.0 474 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 1.8 17.0 502 4.61

6 1 / 2.77 2.77 0.7 1.0 0.8 1.8 17.0 570 3.08

6 7 / 1.04 3.12 0.7 1.0 0.8 1.8 18.0 591 3.08

10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 20.5 887 1.83

16 4.7 0.7 1.0 1.25 1.8 22.0 1087 1.15

25 5.9 0.9 1.0 1.6 1.8 26.5 1622 0.727

35 7.1 0.9 1.0 1.6 1.8 29.0 2015 0.524

50 8.1 1.0 1.0 1.6 1.9 31.5 2461 0.387

70 9.7 1.1 1.2 2.0 2.0 37.0 3522 0.268

95 11.6 1.1 1.2 2.0 2.2 41.5 4491 0.193

120 12.9 1.2 1.2 2.0 2.3 45.0 5381 0.153

150 14.3 1.4 1.4 2.5 2.5 50.0 6919 0.124

185 16.0 1.6 1.4 2.5 2.6 55.0 8285 0.0991

240 18.3 1.7 1.6 2.5 2.8 61.5 10398 0.0754

300 20.7 1.8 1.6 2.5 3.0 67.5 12550 0.0601

Thickness Nominal

of Inner diameter

Ω/km

Compact

round

stranded

mm mm

(approx.)

mm² No./mm mm mm mm mm kg/km

area (approx.) (approx.) (approx.)

Sheath cablecovering of

(approx.) Steel wire

cable at 20°C

Conductor Nominal Nominal Overall Maximum

Nominal No./ Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

section of wire Conductor Insulation

600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)

Page - 69

Page 72: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 15.0 384 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 15.5 398 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 16.0 455 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 16.5 471 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 1.8 17.0 550 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 1.8 18.0 575 4.61

6 7 / 2.77 2.77 0.7 1.0 1.25 1.8 19.0 755 3.08

6 7 / 1.04 3.12 0.7 1.0 1.25 1.8 19.5 792 3.08

10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 22.0 1039 1.83

16 4.7 0.7 1.0 1.25 1.8 23.5 1292 1.15

25 5.9 0.9 1.0 1.6 1.8 28.5 1955 0.727

35 7.1 0.9 1.0 1.6 1.9 31.5 2440 0.524

50 8.1 1.0 1.0 1.6 2.0 34.5 3039 0.387

70 9.7 1.1 1.2 2.0 2.2 40.5 4345 0.268

95 11.6 1.1 1.2 2.0 2.3 45.0 5577 0.193

120 12.9 1.2 1.4 2.5 2.5 50.0 7191 0.153

150 14.3 1.4 1.4 2.5 2.6 55.0 8600 0.124

185 16.0 1.6 1.4 2.5 2.8 60.5 10388 0.0991

240 18.3 1.7 1.6 2.5 3.0 67.5 13059 0.0754

300 20.7 1.8 1.6 2.5 3.2 74.0 15807 0.0601

Thickness Nominal

of Inner diameter

600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Nominal No./ Diameter Thickness Thickness diameter Weight Conductor

Cross- Diameter of of of of of Resistance

cable at 20°Csection of wire Conductor Insulation covering of

(approx.) (approx.)

Sheath cable

(approx.) Steel wire (approx.)

mm² No./mm mm mm mm mm kg/km

area (approx.)

round

stranded

mm mm

Page - 70

Ω/km

Compact

Page 73: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Steel Wire

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 16.0 427 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 16.5 447 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 17.0 510 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 17.5 531 7.41

4 1 / 2.26 2.26 0.7 1.0 1.25 1.8 19.0 727 4.61

4 7 / 0.85 2.55 0.7 1.0 1.25 1.8 19.5 763 4.61

6 1 / 2.77 2.77 0.7 1.0 1.25 1.8 20.5 905 3.08

6 7 / 1.04 3.12 0.7 1.0 1.25 1.8 21.0 908 3.08

10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 24.0 1203 1.83

16 4.7 0.7 1.0 1.6 1.8 26.5 1666 1.15

25 5.9 0.9 1.0 1.6 1.8 30.5 2290 0.727

35 7.1 0.9 1.0 1.6 1.9 34.0 2878 0.524

50 8.1 1.0 1.2 2.0 2.1 39.0 3920 0.387

round

kg/km Ω/km

stranded

mm mm mm mm

Compact

mm² No./mm mm mm

cable at 20°C

area (approx.) (approx.) (approx.) Steel wire (approx.) (approx.)

of Resistance

section of wire Conductor Insulation covering of Sheath cable

Weight Conductor

Cross- Diameter of of of Inner diameter of of

Thickness Nominal Thickness diameterNominal No./ Diameter Thickness

600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 71

Page 74: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

Conductor (Annealed Copper)

Insulation (XLPE Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Inner Covering (PVC Compound)

Galvanized Flat Steel Wire armour

Galvanized Steel Tape binding

Outer sheath (PVC Compound)

Page - 72

600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (acc. to IEC 60502-1)

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 75: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 14.0 365 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 14.0 398 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 14.5 426 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 15.0 434 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 15.5 502 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 16.0 514 4.61

6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 16.5 575 3.08

6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 17.0 598 3.08

10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 19.0 744 1.83

16 4.7 0.7 1.0 0.8 0.3 1.8 20.5 896 1.15

25 5.9 0.9 1.0 0.8 0.3 1.8 23.5 1187 0.727

35 7.1 0.9 1.0 0.8 0.3 1.8 26.0 1472 0.524

50 8.1 1.0 1.0 0.8 0.3 1.8 28.5 1804 0.387

70 9.7 1.1 1.0 0.8 0.3 1.9 32.0 2328 0.268

95 11.6 1.1 1.2 0.8 0.3 2.0 36.5 3031 0.193

120 12.9 1.2 1.2 0.8 0.3 2.1 39.5 3635 0.153

150 14.3 1.4 1.2 0.8 0.3 2.2 43.5 4381 0.124

185 16.0 1.6 1.4 0.8 0.3 2.4 48.5 5342 0.0991

240 18.3 1.7 1.4 0.8 0.3 2.6 54.0 6724 0.0754

300 20.7 1.8 1.6 0.8 0.3 2.7 60.0 8222 0.0601

400 23.4 2.0 1.6 0.8 0.3 3.0 66.5 10210 0.0470

Page - 73

Compact

round

stranded

Minimum

thickness

of Galv.

Steel tape

mm

Steel wire

Thickness

of Inner

covering

(approx.)

mm mm mm kg/kmmmmmmm² No./mm mm

area (approx.) (approx.)

section of wire Conductor

ofCross- Diameter of

Overall Maximum

(approx.)

Conductor

at 20°C

(approx.)

of of

Ω/km

Resistance

Weightdiameter

cable cable

Nominal

Nominal No./ Thickness

Sheath

Thickness

Insulation

of

thickness

of Galv.

Flat

Diameter

Nominal

600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)

Conductor Nominal

Page 76: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 14.5 418 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 14.5 426 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 15.0 460 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 15.5 497 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 16.0 551 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 17.0 593 4.61

6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 17.5 665 3.08

6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 18.0 671 3.08

10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 20.0 884 1.83

16 4.7 0.7 1.0 0.8 0.3 1.8 21.5 1087 1.15

25 5.9 0.9 1.0 0.8 0.3 1.8 25.0 1466 0.727

35 7.1 0.9 1.0 0.8 0.3 1.8 27.5 1841 0.524

50 8.1 1.0 1.0 0.8 0.3 1.8 30.0 2285 0.387

70 9.7 1.1 1.2 0.8 0.3 2.0 34.5 3070 0.268

95 11.6 1.1 1.2 0.8 0.3 2.1 39.0 3989 0.193

120 12.9 1.2 1.2 0.8 0.3 2.2 42.0 4816 0.153

150 14.3 1.4 1.4 0.8 0.3 2.3 46.5 5871 0.124

185 16.0 1.6 1.4 0.8 0.3 2.4 52.0 7162 0.0991

240 18.3 1.7 1.6 0.8 0.3 2.7 58.0 9123 0.0754

300 20.7 1.8 1.6 0.8 0.3 2.8 64.0 11130 0.0601

Page - 74

Compact

600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)

Ω/kmmm

(approx.)

mm²

Minimum

thickness

of Galv.

round

stranded

mm mmNo./mm mm mm mm mm kg/km

area (approx.) (approx.) (approx.)(approx.) Steel wire Steel tape

Sheath cablecovering Flat cable at 20°C

Conductor Nominal Nominal Overall

Thickness thickness

of Inner

Nominal No./ Diameter Thickness

Cross- Diameter of of

diameter Weight Conductor

Maximum

of of Resistanceof Galv.

section of wire Conductor Insulation

of

Thickness

Nominal

Page 77: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 15.0 446 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 15.5 483 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 16.0 532 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 16.5 544 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 17.0 637 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 18.0 659 4.61

6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 18.5 645 3.08

6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 19.0 783 3.08

10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 21.5 1039 1.83

16 4.7 0.7 1.0 0.8 0.3 1.8 23.0 1295 1.15

25 5.9 0.9 1.0 0.8 0.3 1.8 27.0 1795 0.727

35 7.1 0.9 1.0 0.8 0.3 1.8 30.0 2263 0.524

50 8.1 1.0 1.0 0.8 0.3 1.9 32.5 2830 0.387

70 9.7 1.1 1.2 0.8 0.3 2.1 38.0 3838 0.268

95 11.6 1.1 1.2 0.8 0.3 2.2 42.5 5013 0.193

120 12.9 1.2 1.4 0.8 0.3 2.3 47.0 6144 0.153

150 14.3 1.4 1.4 0.8 0.3 2.5 51.5 7450 0.124

185 16.0 1.6 1.4 0.8 0.3 2.7 57.5 9123 0.0991

240 18.3 1.7 1.6 0.8 0.3 2.9 64.0 11666 0.0754

300 20.7 1.8 1.6 0.8 0.3 3.1 70.5 14268 0.0601

Page - 75

600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)

Minimum

thickness

of Galv.

Steel tape

Conductor Nominal

Thickness thickness

Nominal Overall Maximum

Nominal Weight Conductor

Cross- Diameter of of

No./ Diameter Thickness Thickness

of wire Conductor Insulation covering

of Inner of Galv.

mm² No./mm

cable

area (approx.) (approx.) (approx.) (approx.)

mm

section

stranded

mm mmmm mm

Compact

Nominal

mm

at 20°CFlat Sheath cable

of of of

diameter

mm Ω/kmkg/km

Resistance

(approx.) Steel wire

round

Page 78: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : XLPE Compound

Armour : Galvanized Flat Steel Wire+Steel tape open helix

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 16.0 508 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 16.5 520 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 17.0 601 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 17.5 615 7.41

4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 18.5 730 4.61

4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 19.0 750 4.61

6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 20.0 875 3.08

6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 20.5 897 3.08

10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 23.0 1196 1.83

16 4.7 0.7 1.0 0.8 0.3 1.8 25.0 1512 1.15

25 5.9 0.9 1.0 0.8 0.3 1.8 29.0 2100 0.727

35 7.1 0.9 1.0 0.8 0.3 1.9 32.5 2700 0.524

50 8.1 1.0 1.2 0.8 0.3 2.0 36.0 3432 0.387

Page - 76

round

stranded

Compact

600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)

NominalConductor Nominal Nominal Overall Maximum

Steel tape

mm

thickness

kg/km Ω/kmmm mm mm mmmm² No./mm mm mm

cable at 20°C

area (approx.) (approx.) (approx.) Steel wire (approx.) (approx.)

of Galv.

of Resistance

section of wire Conductor Insulation covering Flat Sheath cable

Weight Conductor

Cross- Diameter of of of Inner of Galv. of of

Thickness diameterMinimumNominal No./ Diameter Thickness Thickness thickness

Page 79: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

Constructions :Conductor (Annealed Copper)

Insulation (XLPE Compound)

Inner Covering (PVC Compound)

Double Aluminium Tape armour

Outer sheath (PVC Compound)

Constructions :Conductor (Annealed Copper)

Insulation (XLPE Compound)

Filler (Polyprophylene yarn,or extruded filler

up to request)

Binding tape (Manufacturer's option)

Inner Covering (PVC Compound)

Double Galvanized Steel Tape armour

Outer sheath (PVC Compound)

Page - 77

600/1000 V XLPE INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DATA/PVC (acc. to IEC 60502-1)

600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (acc. to IEC 60502-1)

11

2

3

54

6

7

2

3

4

5

6

7

1

2

3

4

5

1

2

34

5

Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA, AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed

Page 80: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Inner covering : PVC Compound Maximum 90°C

Armour : Double Aluminium tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black

Sheath - Black

SINGLE CORE

16 4.7 0.7 1.0 0.5 1.8 13.5 335 1.15

25 5.9 0.9 1.0 0.5 1.8 15.0 455 0.727

35 7.1 0.9 1.0 0.5 1.8 16.5 570 0.524

50 8.1 1.0 1.0 0.5 1.8 17.5 705 0.387

70 9.7 1.1 1.0 0.5 1.8 19.5 930 0.268

95 11.6 1.1 1.0 0.5 1.8 21.5 1210 0.193

120 12.9 1.2 1.0 0.5 1.8 23.0 1470 0.153

150 14.3 1.4 1.0 0.5 1.8 24.5 1760 0.124

185 16.0 1.6 1.0 0.5 1.8 27.0 2155 0.0991

240 18.3 1.7 1.0 0.5 1.8 29.5 2735 0.0754

300 20.7 1.8 1.0 0.5 1.9 32.0 3365 0.0601

400 23.4 2.0 1.2 0.5 2.0 35.5 4240 0.0470

500 26.5 2.2 1.2 0.5 2.1 39.5 5350 0.0366

630 30.3 2.4 1.2 0.5 2.3 44.0 6670 0.0283

Nominal

(approx.)

Thickness

of

Aluminium

tape

mm mm mm kg/kmmmmmmm² No./mm mm

area (approx.) (approx.)

covering

Cross- Diameter of of

section of wire Conductor

of of of

Thickness

of Inner

(approx.)

Ω/km

Resistance

Nominal No./ Diameter Thickness

(approx.)

Insulation

Conductor

cable

Overall

at 20°C

Maximum

XLPE/DATA/PVC (IEC 60502-1)

Thickness

Sheath

Conductor Nominal Nominal

Weightdiameter

cable

Page - 78

Compact

round

stranded

600/1000 V XLPE INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLES

Page 81: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Black

Sheath - Black

TWO CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.2 1.8 12.5 220 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 13.0 230 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 13.0 258 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 13.5 268 7.41

4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 14.0 312 4.61

4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 15.0 326 4.61

6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 15.0 372 3.08

6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 16.0 387 3.08

10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 18.0 514 1.83

16 4.7 0.7 1.0 0.2 1.8 19.0 643 1.15

25 5.9 0.9 1.0 0.2 1.8 23.0 893 0.727

35 7.1 0.9 1.0 0.2 1.8 24.5 1134 0.524

50 8.1 1.0 1.0 0.2 1.8 27.0 1422 0.387

70 9.7 1.1 1.0 0.2 1.9 30.5 1905 0.268

95 11.6 1.1 1.2 0.2 2.0 35.0 2544 0.193

120 12.9 1.2 1.2 0.5 2.1 39.5 3505 0.153

150 14.3 1.4 1.4 0.5 2.3 43.5 4245 0.124

185 15.9 1.6 1.4 0.5 2.4 48.5 5180 0.0991

240 18.3 1.7 1.6 0.5 2.6 54.0 6530 0.0754

300 20.7 1.8 1.6 0.5 2.7 59.5 8004 0.0601

600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)

Thickness

Sheath

Conductor Nominal Nominal

Weightdiameter

cable cable at 20°C

(approx.)

Ω/km

Resistance

Nominal No./ Diameter Thickness

Overall Maximum

(approx.)

Insulation

Conductor

Cross- Diameter of of of of of

section of wire Conductor

mm² No./mm mm

area (approx.) (approx.)

mm mm mm kg/kmmmmm

Compact

round

stranded

Nominal

thickness

of

Steel tape

Thickness

of Inner

covering

(approx.)

Page - 79

Page 82: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue

Sheath - Black

THREE CORES

1.5 1 / 1.58 1.58 0.7 1.0 0.2 1.8 13.0 249 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 13.5 259 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 13.5 294 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 14.0 307 7.41

4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 15.0 263 4.61

4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 15.5 381 4.61

6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 16.0 445 3.08

6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 16.5 463 3.08

10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 18.5 630 1.83

16 4.7 0.7 1.0 0.2 1.8 20.0 812 1.15

25 5.9 0.9 1.0 0.2 1.8 23.5 1150 0.727

35 7.1 0.9 1.0 0.2 1.8 26.0 1481 0.524

50 8.1 1.0 1.0 0.2 1.8 28.5 1882 0.387

70 9.7 1.1 1.2 0.2 1.9 33.0 2588 0.268

95 11.6 1.1 1.2 0.2 2.1 37.5 3456 0.193

120 12.9 1.2 1.2 0.5 2.2 42.0 4669 0.153

150 14.3 1.4 1.4 0.5 2.4 46.5 5708 0.124

185 15.9 1.6 1.4 0.5 2.5 51.5 6965 0.0991

240 18.3 1.7 1.6 0.5 2.7 58.0 8905 0.0754

300 20.7 1.8 1.6 0.5 2.9 64.0 10919 0.0601

600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)

section of wire Conductor Insulation

of of of ResistanceCross- Diameter of of

Thickness diameter Weight ConductorNominal No./ Diameter Thickness

Maximum

cable at 20°C

Conductor Nominal Nominal Overall

(approx.) (approx.)

Sheath cablecovering of

(approx.) Steel tape (approx.)

mm² No./mm mm mm mm mm kg/km

area (approx.)

Ω/km

Compact

round

stranded

mm mm

of Inner thickness

Page - 80

Thickness Nominal

Page 83: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Red,Yellow, Blue, Black

Sheath - Black

FOUR CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.2 1.8 13.5 280 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 14.0 293 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 14.5 343 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 15.0 357 7.41

4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 16.0 426 4.61

4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 16.5 446 4.61

6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 17.0 531 3.08

6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 17.5 552 3.08

10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 20.0 764 1.83

16 4.7 0.7 1.0 0.2 1.8 21.5 999 1.15

25 5.9 0.9 1.0 0.2 1.8 25.5 1434 0.727

35 7.1 0.9 1.0 0.2 1.8 28.5 1859 0.524

50 8.1 1.0 1.0 0.2 1.9 31.5 2383 0.387

70 9.7 1.1 1.2 0.2 2.0 36.0 3311 0.268

95 11.6 1.1 1.2 0.5 2.2 42.5 4872 0.193

120 12.9 1.2 1.4 0.5 2.4 46.5 5983 0.153

150 14.3 1.4 1.4 0.5 2.5 51.0 7274 0.124

185 15.9 1.6 1.4 0.5 2.7 57.0 8922 0.0991

240 18.3 1.7 1.6 0.5 2.9 64.0 11427 0.0754

300 20.7 1.8 1.6 0.5 3.1 70.5 14015 0.0601

Ω/km

Compact

round

stranded

mm mm

(approx.)

mm² No./mm mm mm mm mm kg/km

area (approx.) (approx.) (approx.)

Sheath cable

(approx.) Steel tape

cable at 20°Csection of wire Conductor Insulation covering of

of of of ResistanceCross- Diameter of of

Thickness diameter Weight ConductorNominal No./ Diameter Thickness

600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 81

Thickness Nominal

of Inner thickness

Page 84: Catalogue LV 07

Section 3 - XLPE Insulated Cables Armoured Cables

CONSTRUCTION TECHNICAL DATA

Conductor : Plain Annealed Copper Voltage

(to IEC 60228 class 2) Uo/U - 600/1000 V

Insulation : XLPE Compound Operating Temperature

Filler : Suitable material Maximum 90°C

Inner covering : PVC Compound

Armour : Double Galvanized Steel tape

Sheath : PVC Compound type ST2

Colour Ident. : Insulation - Black with numbering code

Sheath - Black

FIVE CORES

1.5 1 / 1.38 1.38 0.7 1.0 0.2 1.8 14.5 319 12.1

1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 15.0 333 12.1

2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 15.5 390 7.41

2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 16.0 405 7.41

4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 17.0 496 4.61

4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 17.5 520 4.61

6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 18.5 620 3.08

6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 19.0 645 3.08

10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 22.0 900 1.83

16 4.7 0.7 1.0 0.2 1.8 23.5 1196 1.15

25 5.9 0.9 1.0 0.2 1.8 27.5 1720 0.727

35 7.1 0.9 1.0 0.2 1.9 31.0 2252 0.524

50 8.1 1.0 1.2 0.2 2.0 35.0 2946 0.387

stranded

kg/km Ω/km

round

mm mm mm mm

Compact

mm² No./mm mm mm

cable at 20°C

area (approx.) (approx.) (approx.) Steel tape (approx.) (approx.)

of Resistance

section of wire Conductor Insulation covering of Sheath cable

Weight Conductor

Cross- Diameter of of of Inner thickness of of

Thickness Nominal Thickness diameterNominal No./ Diameter Thickness

600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)

Conductor Nominal Nominal Overall Maximum

Page - 82

Page 85: Catalogue LV 07

DC Alternating Minimum ConductorConductor Current Insulation Short

Flat Trefoil Trefoil Resistance resistance Nominal Resistance circuit

at 20°C at 90°C / Trefoil Flat Trefoil Flat Capacitance at 20°C current /

50 Hzcore to core core to core 1 sec

A A A Ω / km Ω / km Ω / km Ω / km mH / km mH / km µF / km M Ω. km A

1.5 re/rm 22 21 22 12.1 15.43 0.1459 0.1603 0.4646 0.5108 0.0520 3000 212

2.5 re/rm 30 29 29 7.41 9.45 0.1339 0.1484 0.4264 0.4726 0.0571 2500 353

4 re/rm 42 40 37 4.61 5.88 0.1244 0.1391 0.3962 0.4424 0.0621 2000 564

6 re/rm 55 53 46 3.08 3.93 0.1160 0.1305 0.3693 0.4155 0.0665 2000 846

10 re/rm 77 74 61 1.83 2.34 0.1072 0.1217 0.3416 0.3878 0.0721 1500 1410

16 cm 105 101 79 1.15 1.47 0.1028 0.1172 0.3264 0.3726 0.0751 1500 2256

25 cm 141 135 101 0.727 0.927 0.0984 0.1130 0.3124 0.3586 0.0752 1500 3525

35 cm 176 169 122 0.524 0.669 0.0932 0.1077 0.2967 0.3429 0.0789 1000 4935

50 cm 216 207 144 0.387 0.494 0.0911 0.1056 0.2890 0.3353 0.0796 1000 7050

70 cm 279 268 178 0.268 0.343 0.0875 0.1023 0.2778 0.3240 0.0815 900 9870

95 cm 342 328 211 0.193 0.247 0.0845 0.0991 0.2674 0.3136 0.0848 800 13395

120 cm 400 383 240 0.153 0.196 0.0827 0.0974 0.2629 0.3091 0.0853 800 16920

150 cm 464 444 271 0.124 0.159 0.0829 0.0975 0.2626 0.3088 0.0846 800 21150

185 cm 533 510 304 0.0991 0.1272 0.0830 0.0976 0.2612 0.3074 0.0833 900 26085

240 cm 634 607 351 0.0754 0.0972 0.0814 0.0960 0.2565 0.3028 0.0848 800 33840

300 cm 736 703 396 0.0601 0.0779 0.0799 0.0944 0.2526 0.2988 0.0860 800 42300

400 cm 868 823 464 0.0470 0.0614 0.0728 0.0874 0.2500 0.2962 0.0865 700 56400

500 cm 998 946 525 0.0366 0.0482 0.0777 0.0923 0.2471 0.2933 0.0871 700 70500

630 cm 1151 1088 596 0.0283 0.0376 0.0770 0.0916 0.2447 0.2909 0.0880 700 88830

800 cm 1328 1252 679 0.0221 0.0310 0.0763 0.0908 0.2425 0.2887 0.0883 700 112800

1000 rm 1511 1420 767 0.0176 0.0258 0.0743 0.0889 0.2363 0.2825 0.0902 600 141000

Note : re : Round solid conductor IEC 60228 class 1 Underground : Thermal resistivity of soil : 2.5 K.m / W Note : 1) Reference methode of installation to be used to obtain current carryingrm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cm capacity for : in cable ducting, in cables conduit, cables direct in the -cm : Circular stranded compacted conductor IEC 60228 class 2 Base temperature : 20°C ground with / without added protection against mechanical damage

2) The Inductance calculated for non armour cable.

Conductor Nominal

Area

In Air ( 30°C ) In Ground 1)

mm²

CURRENT CARRYING CAPACITY FOR SINGLE CORE XLPE INSULATED CABLE

Reactance2) (50 Hz) Inductance2) (50 Hz)Current Carrying Capacity

Section 4 - General Information

Page - 83

Page 86: Catalogue LV 07

DC Alternating Minimum ConductorConductor Current Insulation Short

Resistance resistance Nominal Resistance circuit 2 3 / 4 * 2 3 / 4 * at 20°C at 90°C / 2 / 3 4 2 / 3 4 Capacitance at 20°C current /

Core Core Core Core 50 Hz Core Core Core Core core to core core to core 1 sec

A A A A Ω / km Ω / km Ω / km Ω / km mH / km mH / km µF / km M Ω. km A

1.5 re/rm 26 23 26 22 12.1 15.43 0.0999 0.1125 0.3181 0.2498 0.0520 3000 2122.5 re/rm 36 32 34 29 7.41 9.45 0.0961 0.1086 0.3057 0.2325 0.0571 2500 3534 re/rm 49 42 44 37 4.61 5.88 0.0899 0.1025 0.2860 0.2128 0.0621 2000 5646 re/rm 63 54 56 46 3.08 3.93 0.0853 0.0980 0.2714 0.1982 0.0665 2000 846

10 re/rm 86 75 73 61 1.83 2.34 0.0802 0.0930 0.2552 0.1819 0.0721 1500 141016 cm 115 100 95 79 1.15 1.47 0.0781 0.0910 0.2485 0.1752 0.0751 1500 225625 cm 149 127 121 101 0.727 0.927 0.0779 0.0908 0.2480 0.1748 0.0752 1500 352535 cm 185 158 146 122 0.524 0.669 0.0753 0.0883 0.2397 0.1664 0.0789 1000 4935

50 cm 225 192 173 144 0.387 0.494 0.0748 0.0877 0.2379 0.1646 0.0796 1000 705070 cm 289 246 213 178 0.268 0.343 0.0734 0.0864 0.2335 0.1602 0.0815 900 987095 cm 352 298 252 211 0.193 0.247 0.0711 0.0842 0.2262 0.1530 0.0848 800 13395120 cm 410 346 287 240 0.153 0.197 0.0708 0.0839 0.2254 0.1521 0.0853 800 16920

150 cm 473 399 324 271 0.124 0.160 0.0712 0.0843 0.2267 0.1534 0.0846 800 21150185 cm 542 456 363 304 0.0991 0.1281 0.0720 0.0851 0.2292 0.1559 0.0833 900 26085240 cm 641 538 419 351 0.0754 0.0984 0.0711 0.0842 0.2264 0.1531 0.0848 800 33840300 cm 741 621 474 396 0.0601 0.0799 0.0704 0.0835 0.2240 0.1507 0.0860 800 42300400 cm 892 745 555 464 0.0470 0.0633 0.0701 0.0832 0.2231 0.1498 0.0865 700 56400

Note : re : Round solid conductor IEC 60228 class 1 Thermal resistivity of soil : 2.5 K.m / W 4* : 3 Phasa + Netral / Groundrm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cmcm : Circular stranded compacted conductor IEC 60228 class 2 Base temperature : 20°C

In Air ( 30°C ) Underground, Direct burial

CURRENT CARRYING CAPACITY FOR MULTICORE XLPE INSULATED CABLE

Current Carrying Capacity Reactance (50 Hz) Inductance (50 Hz)Conductor

mm²

Underground :

NominalArea

Section 4 - General Information

Page - 84

Page 87: Catalogue LV 07

DC Alternating Minimum ConductorConductor Current Insulation Short

Flat Trefoil Trefoil Resistance resistance Nominal Resistance circuit

at 20°C at 70°C / Trefoil Flat Trefoil Flat Capacitance at 20°C current /

50 Hzcore to core core to core 1 sec

A A A Ω / km Ω / km Ω / km Ω / km mH / km mH / km µF / km M Ω. km A

1.5 re/rm 18 17 18 12.1 14.4777 0.1476 0.1735 0.4697 0.5159 0.1391 50 1742.5 re/rm 25 24 24 7.41 8.8661 0.1359 0.1621 0.4327 0.4789 0.1531 50 2904 re/rm 34 33 31 4.61 5.5159 0.1291 0.1555 0.4110 0.4572 0.1553 50 4646 re/rm 45 43 39 3.08 3.6853 0.1209 0.1475 0.3848 0.4310 0.1671 50 69610 re/rm 63 60 52 1.83 2.1897 0.1112 0.1381 0.3538 0.4000 0.1827 50 1160

16 rm 85 82 67 1.15 1.3761 0.1034 0.1307 0.3292 0.3754 0.1966 40 185625 rm 114 110 86 0.727 0.87 0.0988 0.1263 0.3145 0.3607 0.2001 40 290035 rm 143 137 103 0.524 0.6272 0.0941 0.1218 0.2995 0.3457 0.2100 40 406050 rm 174 167 122 0.387 0.4634 0.0909 0.1188 0.2895 0.3357 0.2127 30 580070 rm 225 216 151 0.268 0.3212 0.0869 0.1150 0.2767 0.3229 0.2223 30 8120

95 rm 275 264 179 0.193 0.2317 0.0864 0.1145 0.2749 0.3212 0.2205 30 11020120 rm 321 308 203 0.153 0.1841 0.0838 0.1121 0.2669 0.3131 0.2270 30 13920150 rm 372 356 230 0.124 0.1497 0.0833 0.1116 0.2651 0.3113 0.2274 20 17400185 rm 427 409 258 0.0991 0.1202 0.0828 0.1111 0.2634 0.3096 0.2279 20 21460240 rm 507 485 297 0.0754 0.0924 0.0814 0.1098 0.2592 0.3054 0.2308 20 27840

300 rm 587 561 336 0.0601 0.0746 0.0807 0.1091 0.2567 0.3029 0.2323 20 34800400 rm 689 656 394 0.0470 0.0597 0.0799 0.1084 0.2543 0.3005 0.2387 20 46400500 rm 789 749 445 0.0366 0.0482 0.0790 0.1075 0.2513 0.2975 0.2355 20 58000630 rm 905 855 506 0.0283 0.0395 0.0773 0.1059 0.2459 0.2921 0.2416 20 73080800 rm 1037 971 577 0.0221 0.0334 0.0756 0.1044 0.2406 0.2868 0.2476 20 928001000 rm 1167 1079 652 0.0176 0.0290 0.0750 0.1038 0.2386 0.2848 0.2500 20 116000

Note : re : Round solid conductor IEC 60228 class 1 Underground : Thermal resistivity of soil : 2.5 K.m / W Note : 1) Reference methode of installation to be used to obtain current carryingrm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cm capacity for : in cable ducting, in cables conduit, cables direct in the -

Base temperature : 20°C ground with / without added protection against mechanical damage2) The Inductance calculated for non armour cable.

Nominal

mm²

Area

Reactance2) (50 Hz) Inductance 2) (50 Hz)Conductor

Current Carrying Capacity In Air ( 30°C ) In Ground 1)

CURRENT CARRYING CAPACITY FOR SINGLE CORE PVC INSULATED CABLE

Section 4 - General Information

Page - 85

Page 88: Catalogue LV 07

DC Alternating Minimum ConductorConductor Current Insulation Short

Resistance resistance Nominal Resistance circuit 2 3 / 4 * 2 3 / 4 * at 20°C at 70°C / 2 / 3 4 2 / 3 4 Capacitance at 20°C current /

Core Core Core Core 50 Hz Core Core Core Core core to core core to core 1 sec

A A A A Ω / km Ω / km Ω / km Ω / km mH / km mH / km µF / km M Ω. km A

1.5 re/rm 22 18.5 22 18 12.1 14.4777 0.1075 0.1199 0.3421 0.2688 0.1391 50 1742.5 re/rm 30 25 29 24 7.41 8.8661 0.0994 0.1120 0.3165 0.2433 0.1531 50 2904 re/rm 40 34 38 31 4.61 5.5159 0.0983 0.1109 0.3130 0.2398 0.1553 50 4646 re/rm 51 43 47 39 3.08 3.6853 0.0928 0.1054 0.2954 0.2221 0.1671 50 696

10 re/rm 70 60 63 52 1.83 2.1897 0.0865 0.0993 0.2754 0.2021 0.1827 50 116016 rm 94 80 81 67 1.15 1.3761 0.0818 0.0946 0.2604 0.1871 0.1966 40 185625 rm 119 101 104 86 0.727 0.8701 0.0807 0.0936 0.2569 0.1836 0.2001 40 290035 rm 148 126 125 103 0.524 0.6273 0.0778 0.0907 0.2478 0.1745 0.2100 40 4060

50 rm/sm 180 153 148 122 0.387 0.4635 0.0822 0.0950 0.2617 0.1884 0.2127 30 580070 rm/sm 232 196 183 151 0.268 0.3213 0.0789 0.0917 0.2510 0.1777 0.2223 30 812095 rm/sm 282 238 216 179 0.193 0.2318 0.0791 0.0920 0.2518 0.1785 0.2205 30 11020120 rm/sm 328 276 246 203 0.153 0.1842 0.0772 0.0901 0.2457 0.1724 0.2270 30 13920

150 rm/sm 379 319 278 230 0.124 0.150 0.0775 0.0904 0.2466 0.1733 0.2274 20 17400185 rm/sm 434 364 312 258 0.0991 0.1204 0.0769 0.0898 0.2447 0.1714 0.2279 20 21460240 rm/sm 514 430 361 297 0.0754 0.0926 0.0759 0.0889 0.2417 0.1684 0.2308 20 27840300 rm/sm 593 497 408 336 0.0601 0.0749 0.0756 0.0886 0.2407 0.1674 0.2323 20 34800

Note : re : Round solid conductor IEC 60228 class 1 Thermal resistivity of soil : 2.5 K.m / W 4* : 3 Phasa + Netral / Groundrm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cmsm : Sector shape stranded conductor IEC 60228 class 2 Base temperature : 20°C

In Air ( 30°C ) Underground, Direct burial

Underground :

mm²

Reactance (50 Hz) Inductance (50 Hz)Conductor

CURRENT CARRYING CAPACITY FOR MULTICORE PVC INSULATED CABLE

NominalArea

Current Carrying Capacity

Section 4 - General Information

Page - 86

Page 89: Catalogue LV 07

Rating factor relating to open air temperature

Air temperature°C 10 15 20 25 30 35 40 45 50 55 60 65 70 80

PVC Insulation 1.22 1.17 1.12 1.06 1.00 0.94 0.87 0.79 0.71 0.61 0.50 - - -

XLPE Insulation 1.15 1.12 1.08 1.04 1.00 0.96 0.91 0.87 0.82 0.76 0.71 0.65 0.58 0.41

Rating factor relating to Ground temperature

Ground temp °C 10 15 20 25 30 35 40 45 50 55 60 65 70 80

PVC Insulation 1.10 1.05 1.00 0.95 0.89 0.84 0.77 0.71 0.63 0.55 0.45 - - -

XLPE Insulation 1.07 1.04 1.00 0.96 0.93 0.89 0.85 0.80 0.76 0.71 0.65 0.60 0.53 0.38

Rating factor relating to themal ground resistivity

1 1.5 2 2.5 3

1.18 1.1 1.05 1.00 0.96

Thermal Resistivity of soil K.m / W

Rating factors

In Air

Rating factor based on 3 core cable for size 1.5 ~ 10 mm²

5 0.70 0.75

Number of coreUnder ground

7 0.60 0.65

10 0.50 0.55

0.40 0.45

24 0.35 0.40

14 0.45 0.50

61 0.25 0.30

40 0.30 0.35

19 Section 4 - General Information

Page - 87

Page 90: Catalogue LV 07

Section 4 - General Information

to be applied to reference ratings for multi-core cables in free air

Number Number of cables

of trays 1 2 3 4 6 9

1 1.00 0.88 0.82 0.79 0.76 0.73

2 1.00 0.87 0.80 0.77 0.73 0.68

3 1.00 0.86 0.79 0.76 0.71 0.66

1 1.00 1.00 0.98 0.95 0.91 -

2 1.00 0.99 0.96 0.92 0.87 -

3 1.00 0.98 0.95 0.91 0.85 -

1 1.00 0.88 0.82 0.78 0.73 0.72

2 1.00 0.88 0.81 0.76 0.71 0.70

1 1.00 0.91 0.89 0.88 0.87 -

2 1.00 0.91 0.88 0.87 0.85 -

1 1.00 0.87 0.82 0.80 0.79 0.78

2 1.00 0.86 0.80 0.78 0.76 0.73

3 1.00 0.85 0.79 0.76 0.73 0.70

1 1.00 1.00 1.00 1.00 1.00 -

2 1.00 0.99 0.98 0.97 0.96 -

3 1.00 0.98 0.97 0.96 0.93 -

Factors apply to single layer groups of cables as shown above and do not apply when cables are installed in more than one layer touching each other.

Values for such installations may be significantly lower and shall be determined by an appropriate method.

NOTE 1 Values given are averages for the cable types and range of conductor sizes considered. The spread of values is generally less than ± 5 %.

NOTE 2 Values are given for vertical a spacing between trays of 300 mm and at least 20 mm between trays and wall. For closer spacing the factors

should be reduced.

NOTE 3 Values are given for horizontal spacing between trays of 225 mm with trays mounted back to back. For closer spacing the factors should be

reduced.

Reduction factors for group of more than one multi-core cable (note 1)

Page - 88

Method of installation

Perforated trays

(note 2)

Perforated

Vertical

trays

supports,

cleats, etc.

(note 2)

(note 3)

Ladder

Touching

Spaced

≥ 20 mm

≥ 20 mm

D

Touching

Spaced

Touching

Spaced

≥ 20 mm

≥ 20 mm

D

≥225 mm

≥225 mm

D

Page 91: Catalogue LV 07

Section 4 - General Information

to be applied to reference rating for one circuit of single-core cables in free air

Number of

trays 1 2 3

1 0.98 0.91 0.87

2 0.96 0.87 0.81

3 0.95 0.85 0.78

1 0.96 0.86 -

2 0.95 0.84 -

1 1.00 0.97 0.96

2 0.98 0.93 0.89

3 0.97 0.90 0.86

1 1.00 0.98 0.96

2 0.97 0.93 0.89

3 0.96 0.92 0.86

1 1.00 0.91 0.89

2 1.00 0.90 0.86

1 1.00 1.00 1.00

2 0.97 0.95 0.93

3 0.96 0.94 0.90

NOTE 1 Value given are averages for the cable types and range of conductor sizes considered. The spread of values is generally less than ± 5 %.

NOTE 2 For circuits having more than one cable in parallel per phase, each three phase set of conductors should be considered as a circuit for the

purpose of this table

NOTE 3 Values are given for vertical spacings between trays of 300 mm.For closer spacing the factors should be reduced.

NOTE 4 Values are given for horizontal spacings between trays of 225 mm with trays mounted back to back and at least 20 mm between the tray

and any wall. For closer spacing the factors should be reduced.

Reduction factors for groups of more than one circuit of single-core cables (Note 1)

Perforated

trays

Page - 89

(note 4)

formation

(Note 3)

supports,cleats etc.

(Note 3)

Vertical

perforated trays

(Note 3)

Ladder

supports,cleats etc.

(Note 3)

Perforated

trays

Vertically

(Note 4)

Ladder

Use as a multiplier to

rating for

Perforated

trays

Three cables in

horizontal

Method of installation

Three cables in

trefoil

formation

Three cables in

horizontal

formation

Three cables

in vertcal

formation

Touching

≥ 20 mm

Spaced

Touching

≥ 20 mm

≥ 20 mm

≥ 2 D D

225 mm

D

≥ 2 D

≥ 20 mm

≥ 2 D D

Touching

≥225 mm

Page 92: Catalogue LV 07

Section 4 - General Information

PERMISSIBLE PULLING TENSION

Pulling equipment Permissible pulling tension (kg)

PULLING EYE 7 x (Number of core) x (Cross section area of conductor)

CABLE NET About 500 kg, but the maximum tension shall not be more than one of

conductor (same calculation as using PULLING EYE)

Reference data on Aluminium conductor

Pulling equipment Permissible pulling tension (kg)

PULLING EYE 4 x (Number of core) x (Cross section area of conductor)

CABLE NET About 500 kg, but the maximum tension shall not be more than one of

conductor (same calculation as using PULLING EYE)

Note) Cable net shall be covered more than 500 mm in length

MINIMUM BENDING RADIUS D : Diameter of cable

Reference data on other types of POWER cables

Reference data on other types of INSTRUMENT cables

Note) Sheild tape shall be

AL mylar tape

PERMISSIBLE SIDE WALL PRESSURE

300kg/m is suggested as permissible side wall pressure to the cable during installation.

Side wall pressure (T1) can be calculated with below formula.

T1 = Pulling tension (T) / Bending radius (r)

CALCULATION OF CABLE PULLING TENSION DURING INSTALLATION

The cable pulling tension (T2) during installation can be calculated with below formula.

1) Horizontal straight part : W : Weight of cable (kg/m)

2) Horizontal curve part : L : Length of cable with straight part (m)

θ : Angle of curve part (rad)

µ : Friction factor T2 : Pulling tension (kg)

on pulley T3 : Pulling tension before curve part (kg)

underground T4 : Pulling tension after curve part (kg)

in pipe

Page - 90

6D

Type of cable

Non shield cable ( XLPE/PVC etc )

Sheild cable (XLPE/PVC-S etc)

6D

0.2

0.2 - 0.3

0.5 - 0.7

Friction factor

Triplex type cable ( CVT etc )

Wire armored cable ( XLPE/SWA/PVC etc)

Tape armored cable (XLPE/DSTA/PVC etc)

Flat tape armored (XLPE/FSWA/PVC etc)

Type of cable

Sheild cable ( XLPE/PVC-S etc )

Non Sheild cable ( XLPE/PVC etc )

Multi Core Cable

8D

Sector conductorRound / Compacted Conductor

10D 12DMedium Voltage Cable

10D

10D

Minimum bending radius

Single core cable

Multi core cableSector conductor

Round/Compacted

conductor

8D

6D

8D

10D

10D

8D 12D

-

12D

12D10D

Minimum bending radius

Multi core cable

Minimum bending radius

Single core cableType of cable

12D

12D

10D

10D

-

T kg

LWT **2

µ=( )θµ

eTT *43

=

r

Page 93: Catalogue LV 07

Section 4 - Contents & Information

Fire Performance TestsFlame Propagation Tests IEC 60332-1Part 1 - Test on a single vertical insulated wire or cable This is a relatively simple method for providing adequate indication of the flame-retardant characteristics of a single cable.

A 600 mm long cable sample is verticatlly suspended, placed in the middle of a three-sided metal screen.

This is subjected to the regulated flame of one (up to a cable diameter of 50 mm) or two (above 50 mm diameter) gas burners at an

angle of 45° to the cable. The flame is applied for a continuous time calculated according to an increasing with the cable weight

(from around 1-minute for a small control cable to about 7 minutes for a 4 core 300 mm² power cable). The test is passed if the cable

has self-extinguished and the charred or flame affected portion of the cable has not reached the top of the sample.

IEC 60332-3Part 3 - Test on bunched wire or cablesThis test was developed to obtain a method to determine the flame propagation characteristics of bunched cables.

It can not be assumed that because a single vertical cable complies with the requirements of IEC 60332 part 1 it will also behave in

a similar manner when bunched with others cables.

The propagation of a flame along a bunch of cables depends on a number of features, such as :

The volume of combustible material exposed to the fire

The geometrical configuration of the cables

The temperature at which it is possible to ignite any gases emitted from the cables

The quantity of combustible gas released from the cables

The volume of air passing through the cable installation

The test consists of a vertical chamber, 1 x 2 x 4 m. Openings air inlet and outlet are provided in the base and the top of the test

chamber for a controlled air flow rate during the test. The cable samples to be tested are 3.5 m long and fixed to a steel ladder mounted

150 mm from the rear wall vertically with the test chamber. The number of lengths of cables in the test depends on the test categoty

based on the volume of combustible material.

Test Category Volume of combustible material Time of flame application

A 7 litres / m 40 Minutes

B 3.5 litres / m 40 Minutes

C 1.5 litres / m 20 Minutes

A ribbon gas burner of a set size and heat flow rate, operating at 800°C is mounted horizontally in front of the cable samples at a set

distance and height. The test is passed if the charred or affected portion of the samples have not reached a height exceeding 2.5 m

above the bottom edge of the burner.

IEC 60331 - 21 (1999)

Fire resisting characteristics of electric cables Circuit Integrity TestThis test determines the circuit integrity of a cable during and after a prolonged fire :

A horizontally suspended sample 1200 mm long is placed 75 mm above a 610 mm long ribbon type gas burner, the flame temperature

of which is regulated to 750°C. The conductors of the sample are connected to an AC voltage source, at the operating voltage, via fuses.

The flame and test voltage shall be applied continuously for a period of 90 min. 12 hours after the flame has been extinguished the cable

is energised again.

The test is passed if no failure of any of the fuses occurs.

Page - 91

1

Page 94: Catalogue LV 07

Section 4 - General Information

Page - 92

NOTES

Page 95: Catalogue LV 07
Page 96: Catalogue LV 07