catalogue seismic and ultrasonic rat … rat...contatto s.n.c. seismic and ultrasonic rat repellers...

19
Since 1978 CATALOGUE SEISMIC AND ULTRASONIC RAT REPELLERS HACCP Via Atene n.5/1 - 41049 Sassuolo (MO) - Italy - Tel.0039-0536/808170 - Fax.0039-0536/814161 e-mail: [email protected] web: http://www.contattoitalia.it D.Lg. 6/11/2007 N. 193

Upload: others

Post on 04-Apr-2020

14 views

Category:

Documents


0 download

TRANSCRIPT

Since 1978

CATALOGUE SEISMIC AND ULTRASONIC RAT REPELLERS

HACCP

Via Atene n.5/1 - 41049 Sassuolo (MO) - Italy - Tel.0039-0536/808170 - Fax.0039-0536/814161 e-mail: [email protected] web: http://www.contattoitalia.it

D.Lg. 6/11/2007 N. 193

CONTATTO s.n.c.

SEISMIC AND ULTRASONIC RAT REPELLERS

Rats and mice have always been causing economic, image and health-related problems to humans.

Thanks to the ultrasonic and seismic products we offer at Contatto s.n.c., you can now prevent and solve issues concerning undesired animals.

What are the effects of ultrasounds?

Several animals and insects can hear High Frequencies which are unintelligible to the human ear. These frequencies are called ultrasounds. The constant modulation of these frequencies and their intensity will give you the peace of mind that unwelcomed animals and insects will vacate the area in question.

You will be able to obtain this result without hurting or killing the animals.

How do repellers operate?

Repellers create interferences which target the nervous system of animals and insects, or alter their eating habits and ability of communicate.

A green solution

Animals and insects are scared away using a method which preserves the environmental equilibrium and has no impact on human health.

First Results

Results will be seen within 3 to 15 days according to the types of animals/insects and how severe the infestation is. Usually rodents leave the area fairly quickly.

Rats are particularly persistent; however they will start leaving the area within 2 weeks.

Positioning the repellers

This is very important to insure that the device will be working correctly and effectively. As we are dealing with rodents, it is suitable to position the ultrasonic device next to the openings where rodents usually enter or where they get their food.

Note

Ultrasounds cannot go through walls, ceilings or floors: they bounce back, increasing the effectiveness of ultrasonic devices. As the waves produced stay entirely in the room, they cover the environment and keep it safe in its entirety, including the corners. However, we recommend not placing the unit behind curtains, furniture or bulky objects as these could absorb waves or inhibit the device’s functionality. In order to get the best possible result the repeller should work without interruptions. Please note that some pets could be slightly affected by ultrasounds, but their usual behaviour and strength will be back in no time. After an inspection we can offer you the best possible solution to tailor make our intervention according to your needs.

You can contact us for a free inspection and a quote.

We constantly monitor our performance, we verify and check every detail, and our staff is professional and qualified: these is our prerogative to insure personalised and targeted solutions for each customer’s individual need.

Our company offers the best products available on the market: they are environmentally friendly and quickly effective.

ULTRASONIC RAT REPELLER

US2004/U PROFESSIONAL

ENTIRELY MADE OF STAINLESS STEEL

Thanks to its electronic circuit, all the main functions of the ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeter are in the range of maximum shock for mice, for unprecedented results. Its front panel is very discreet thus the device can be used in shops, hotels, restaurants, supermarkets, homes, offices and so on.

INSTRUCTIONS FOR USE

The ultrasonic device emits waves with variable frequencies, which cause a powerful shock to the brain of mice. Power required 230V AC / 12V AC-DC. To turn on the device, use the switch located on its back. The RED LED located on the back of the repeller, lights on and off according to the variation of the frequency being emitted. The variation is completely automatic. The device can be checked by pushing the TEST button: you should hear a loud whistle, which means everything works correctly. The device has been carefully built and the small size of its components allows you to use it constantly, by connecting it to the lighting system. We strongly recommend you to place the repeller facing the direction where mice usually or probably come from. TECHNICAL SPECIFICATIONS Power: 230V AC / 12V AC-DC - 115V AC / 12V AC-DC Power Out: 4W peak Out: tweeter M6205 sens.100dB – controlled with 20Vpp Max area of coverage: 100Sqm Size: 190x168x85 mm Ultrasonic frequency regulated for maximum shock Automatic Variation Speed (calibrated to 0.3Hz approximately).

ULTRASONIC RAT REPELLER

US/PS PROFESSIONAL

ENTIRELY MADE OF STAINLESS STEEL Thanks to its electronic circuit, all the main functions of the ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeter are in the range of maximum shock for mice, for unprecedented results. Its front panel is very discreet thus the device can be used in shops, hotels, restaurants, supermarkets, homes, offices, in agricultural machinery, tunnels...

INSTRUCTIONS FOR USE

The ultrasonic device emits waves with variable frequencies, which cause a powerful shock to the brain of mice. Power required 230V AC / 12V AC-DC. To turn on the device, use the switch located on its back. The RED LED located on the back of the repeller, lights on and off according to the variation of the frequency being emitted. The variation is completely automatic. The device can be checked by pushing the TEST button: you should hear a loud whistle, which means everything works correctly. The device has been carefully built and the small size of its components allows you to use it constantly, by connecting it to the lighting system. We strongly recommend you to place the repeller facing the direction where mice are likely to be coming from.

TECHNICAL SPECIFICATIONS Power: 12V AC-DC Power Out: 4W peak Out: tweeter PT1001 sens.100dB – controlled with 20Vpp Max area of coverage: 100Sqm Size: 85x85x123 mm Ultrasonic frequency regulated for maximum shock Automatic Variation Speed (calibrated to 0.3Hz approximately).

ULTRASONIC RAT REPELLER

PK018 FOR ELECTRICAL CONTROL PANELS

Thanks to its electronic circuit, all the main functions of the ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeter are in the range of maximum shock for mice, for unprecedented results. The device can be used in shops, hotels, restaurants, supermarkets, homes, offices and it is highly recommended to protect areas such as false ceilings, floating floors and all areas or openings for the passage of electrical cables.

INSTRUCTIONS FOR USE The ultrasonic device emits waves with variable frequencies, which cause a powerful shock to the brain of mice. Power required 230V AC / 12V AC-DC. To turn on the device, use the switch located on its front. The RED LED lights on and off according to the variation of the frequency being emitted. The variation is completely automatic. The device can be checked by pushing the TEST button: you should hear a loud whistle, which means everything works correctly. The device has been carefully built and the small size of its components allows you to use it constantly, by connecting it to the lighting system. We strongly recommend you to place the repeller facing the direction where mice are likely to be coming from.

TECHNICAL SPECIFICATIONS Power: 12V AC-DC (Power Pack supplied) Power Out: 4W peak Out: tweeter PT1001 sens.100dB – controlled with 20Vpp Max area of coverage: 100Sqm

SONIC MOLE REPELLER 300Hz

PK019 FOR USE IN GARDENING AND AGRICULTURE

Sonic Mole Repeller 300Hz

Our mole repeller is essential to protect your garden or lawn from rodents or mole activity.

The device produces pulses and vibrations that propagate through the soil in a circular way on both deep and surface level.

By installing our mole repeller, damages to your garden, flowers or trees caused by animals digging underground tunnels can be avoided.

The device is quick and easy to use, just stick it into the ground.

TECHNICAL SPECIFICATIONS The device has a working range of 15m radius, approximately 700/1000 sqm. This could vary according to the soil’s hardness.

Max coverage: 15m (700/1000Sqm, it may vary according to soil hardness)

Power Supply: 4 batteries (1.5V R20 D size)

Battery Life: 4 to 6 months

Size: 415x80 mm (Lxd)

Weight: 360gr

BIRD REPELLER WITH SIMULATION BIRDS OF PREY

PK020 FOR USE IN GARDENING, AGRICULTURE AND CULTURAL HERITAGE

Electronic Bird Repeller. This device has been patented worldwide to keep birds away from your property (such as pigeons and blackbirds), without resorting to harmful chemicals or killing the birds. In fact, thanks to its electronic bird simulator, warning chirps and thrills (simulating birds of prey such as eagles, falcons and owls) drive entire flocks of birds away. Hearing these sounds, birds are in fact scared and alarmed and they lose orientation, believing other birds are in danger, so they leave the area and never come back. The devices works automatically thanks to its heat and motion sensor in the PIR action range. You can regulate the volume and set the time switch (from 5 sec to 30min).

TECHNICAL SPECIFICATIONS Power Supply: 12V/500mA (Power Pack Supplied) Max Coverage: 140sqm Size: 200x120x90 mm

ULTRASONIC CAT REPELLER

PK021

FOR USE IN SMALL INDOOR AND OUTDOOR SPACES

Ultrasonic Device. Electronic ultrasounds generator with motion detector, ideal to scare away cats in an environmentally friendly manner thanks to the ultrasounds which are unintelligible to humans yet very unpleasant to animals. The device identifies the presence of animals thanks to the built in x-ray motion detector which triggers the emission of ultrasonic waves.

TECHNICAL SPECIFICATIONS Max coverage: 60sqm 70° angle Power Supply: 1 battery (9 V DC) Battery Life: 15 days Size: 114x88x60mm. Weight: 180gr

ULTRASONIC RAT REPELLER

PK022

FOR USE IN SMALL SPACES

Ultrasonic Device Electronic device patented to protect your lawn from martens, rats, mice, cockroaches and other pests without resorting to harmful chemicals or killing the animals. Emission of ultrasonic waves at high frequency, adjustable from 30 to 65 KHz. Emission at an angle of 260°, 2 Piezo oscillator. Cannot be heard by humans, harmless to pets.

TECHNICAL SPECIFICATIONS Power Supply: 9 V DC (Power Pack Supplied) Consumption: 1.5W Max coverage: 15/20sqm Size: 20x98x70 mm Ultrasonic frequency set for maximum efficacy.

SEISMIC RAT REPELLER

TRANS-RAT

PROFESSIONAL

ENTIRELY MADE OF STAINLESS STEEL

This product has been built and installed for over 25 years. Once the device has been installed, the results are permanent and the area is protected on a long term basis. The seismic waves emitted by this device can pass through solids: ground, walls, iron, buildings, warehouses, deposits, roofs, lawns, indoor and outdoor concrete floors, cobbled paths, asphalt... The range of action of this appliance is approximately 1250sqm, (20m horizontally, 25m vertically). Although the effect of the waves is immediate, definitive results will be seen in 15 to 30 days. Entirely made of stainless steel.

TECHNICAL SPECIFICATIONS

Power: 230V AC - 50Hz Consumption: 15W Max area of coverage: 1250sqm Size: 150x150x150 mm Weight: 6,5 Kg Resistant to bad weather and direct jets of water over 20atm. Circuit with microprocessor capable of generating over 5 million combinations of seismic waves.

ULTRASONIC RAT REPELLER

US2005/230

PROFESSIONAL

Thanks to its electronic circuit, all the main functions of the ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeter are in the range of maximum shock for mice, for unprecedented results .This appliance is highly recommended to protect large industrial areas such as warehouses, deposits, food factories...

INSTRUCTIONS FOR USE

The ultrasonic device emits waves with variable frequencies, which cause a powerful shock to the brain of mice. Power required 230V AC. The RED LED lights on and off according to the variation of the frequency being emitted.The variation is completely automatic. The device has been carefully built and the small size of its components allows you to use it constantly, by connecting it to the lighting system. We strongly recommend you to place the repeller facing the direction where mice are likely to be coming from.

TECHNICAL SPECIFICATIONS Power: 230V AC Power Out: 24W peak Output: tweeter M6205 and PT 1001 sens.100dB – controlled with 20Vpp Max area of coverage: 300sqm Size: 300x220x180 mm Ultrasonic frequency set for maximum efficacy.

INDUSTRIAL PLANTS

OUTDOOR ULTRASONIC RAT REPELLER

US2009/EST PROFESSIONAL

BUILT INTO A CEILING LIGHT

Thanks to its electronic circuit, all the main functions of this ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeter are in the range of maximum shock for mice, for unprecedented results.Its front panel is very discreet thus the device can be used in shops, hotels, restaurants, supermarkets, homes, offices and so on.

INSTRUCTIONS FOR USE

The ultrasonic device emits waves with variable frequencies, which cause a powerful shock to the brain of mice. Power required 230V AC / 12V AC-DC. Random waves are emitted automatically. The device is hidden into a modified ceiling light. This should be positioned at a height between 2.7 and 6 metres. The higher the device is installed, the larger the protected area will be, however waves’ intensity will diminish.

The device has been carefully built and the small size of its components allows you to use it constantly, by connecting it to the lighting system. We strongly recommend you to place the repeller facing the direction where mice are likely to come from.

TECHNICAL SPECIFICATIONS Power supply: 12 V AC./DC. - 230 Va.c. Output Power: 4 W pep Tweeter: Piezoelectric, coverage 120° x 60° Coverage on the ground: 40sqm min, 120 sqm max, according to the height of installation Container: ceiling light, 2 standard models (other models available upon request at an extra charge) Size: 23x13x13 cm (recommended for acoustics) or 3x16x18 cm Ultrasonic frequency set for maximum efficacy.

ULTRASONIC RAT REPELLER

JUNCTION BOX - CT2008/US – 8/10 EXITS

Thanks to their electronic circuits, all the main functions of these ultrasonic devices are automatic and more efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves produced by the tweeter are in the range of maximum shock for mice, for unprecedented results.The tweeters are controlled by the junction box which powers diffuser model US2004/DIF. They are enough to guarantee protection for the internal/external areas affected.This system is highly recommended to protect large areas such as warehouses, deposits, food factories, buildings...

INSTRUCTIONS FOR USE

This ultrasonic generator of waves with variable frequencies (waves pass through diffusers equipped with tweeter) causes a massive shock to the rodents’ central nervous system. Power required: 230V AC - 50Hz. The RED LEDS located on the junction box (each connected to an exit) light on and off according to the variation of the frequency being emitted. Frequency variations are completely automatic and can be programmed. The devices have been carefully built and the small size of their components allows you to use them constantly, by connecting them to the lighting system. We strongly recommend you to place the various appliances facing the direction where mice are likely to come from.

TECHNICAL SPECIFICATIONS Power supply: 230V AC Output Power: each US2004/DIF diffuser 4W pep Tweeter: tweeter M6205 and PT1001 sens.100dB – controlled with 20Vpp Max Coverage: 100sqm each US2004/DIF diffuser. Ultrasonic frequency set for maximum efficacy. Exits: 8/10 standard exits

INDUSTRIAL PLANTS

ANIMAL REPELLER WITH AMPLIFIER FOR LARGE INDUSTRIAL ESTATES

INDUSTRIAL PLANTS

Thanks to their electronic circuits, all the main functions of these ultrasonic devices are automatic and more efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves produced by the tweeter are in the range of maximum shock for animals, for unprecedented results.The tweeters are controlled by a stereo amplifier which powers diffuser models US2004/DIF and US2005/DIF. We will place enough diffusers to guarantee protection for the internal/external areas affected.This system is highly recommended to protect large areas such as warehouses, deposits, food factories...

INSTRUCTIONS FOR USE This ultrasonic amplifier generates waves of variable frequencies (waves pass through diffusers equipped with tweeter) causing a massive shock to the animals’ central nervous system. Power required: 230V AC . The RED LEDS located on the diffusers (each connected to a tweeter) light on and off according to the variation of the frequency being emitted. Frequency variations are random and completely automatic. The devices have been carefully built and the small size of their components allows you to use them constantly, by connecting them to the lighting system. We strongly recommend you to place the various appliances facing the direction where animals are likely to come from.

TECHNICAL SPECIFICATIONS Power supply: 230V AC Output Power: depending on the installed amplifier Output: tweeter M6205 and PT1001 sens.100dB – controlled with 20Vpp Ultrasonic frequency set for maximum efficacy.

DIFFUSER- US2005/DIF DIFFUSER- US2004/DIF

AMPLIFIER TO BE CONNECTED TO VARIOUS DIFFUSERS

BIRD REPELLER WITH AMPLIFIER

FOR AGRICULTURAL AND INDUSTRIAL PLANTS

AMPLIFIER TO BE CONNECTED TO VARIOUS DIFFUSERS

DIFFUSERS

Bird repeller with stereo amplifier for agricultural and industrial plants. This device has been created to keep birds (pigeons, blackbirds...) away from your lawn without resorting to harmful chemicals or killing the birds. In fact, thanks to its electronic bird simulator, warning chirps and thrills (simulating birds of prey such as eagles, falcons and owls) drive entire flocks of birds away. Hearing these sounds, birds are in fact scared and alarmed and they lose orientation, believing other birds are in danger, so they leave the area and never come back. The devices works automatically thanks to its heat and motion sensor in the PIR action range. You can regulate the volume and set the time switch.

TECHNICAL SPECIFICATIONS Power supply: 230V AC Output Power: depending on the installed amplifier Max Coverage: according to the number of devices installed

INDUSTRIAL PLANTS

ULTRASONIC PIGEON AND SEAGULLS REPELLER

ANTI-VÖGEL JUNCTION BOX 4-8-16 EXITS

FOR LARGE AREAS

Thanks to their electronic circuits, all the main functions of these ultrasonic devices are automatic and more efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves produced by the tweeters are in the range of maximum shock for birds, for unprecedented results.The tweeters are controlled by the junction box which powers diffuser model US2004/DIF. We will place enough tweeters to guarantee protection for the internal/external areas affected. This system is highly recommended to protect large areas such as warehouses, deposits, food factories, buildings...

INSTRUCTIONS FOR USE

This ultrasonic generator of waves with variable frequencies (waves pass through diffusers equipped with tweeter) causes a massive shock to the birds’ central nervous system. Power required: 230V AC - 50Hz. The RED LEDS located on the junction box (each connected to an exit) light on and off according to the variation of the frequency being emitted. Frequency variations are completely automatic and can be programmed. The devices have been carefully built and the small size of their components allows you to use them constantly, by connecting them to the lighting system. We strongly recommend you to place the various appliances facing the direction where birds are likely to come from.

TECHNICAL SPECIFICATIONS Power supply: 230V AC Exits: standard 4-8 (16 exits upon request) Output Power: each US2004/DIF diffuser 4W pep Tweeter: tweeter M6205 and PT1001 sens.100dB – controlled with 20Vpp Max Coverage: 100sqm for each US2004/DIF diffuser Ultrasonic frequency set for maximum efficacy.

DIFFUSER- US2004/DIF DIFFUSER- US2004/DIF

STANDARD JUNCTION BOX 4-8 AUTOMATIC COMMUTATION EXITS.UP TO 4 DIFFUSERS

PER EXIT)

ULTRASONIC PIGEON REPELLER+ LED

US2004/AV-LAMP

PROFESSIONAL PRODUCT

Thanks to its electronic circuit, all the main functions of this ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeters cause maximum shock to birds, for unprecedented results. Furthermore, the flashing LED disturbs and temporarily disorients the birds.This appliance is equipped with a speaker which can cover an area of approximately 100 sqm. The device should be facing the direction where birds are likely to comefrom. This system is highly recommended to protect large areas such as warehouses, deposits, food factories...

INSTRUCTIONS FOR USE

The US2004/AV-LAMP bird repeller’s range of action is up to 10 linear metres, covering an area of approximately 100 sqm.The speaker produces ultrasonic sounds at an angle of 110 degrees; therefore, assuming the unit is placed in a squared room, the best position would be in a corner facing diagonally the opposite angle. As we are dealing with birds, the unit should be placed at roof level in order to tackle the issue in an effective manner. Ultrasounds act on the birds’ central nervous system, who will leave the area within a fairly short time (this may vary) as they will find the ultrasounds unbearable. Usually birds do not leave straight away: at first they will look for shelters, for example they can hide behind a wall or a piece of furniture to try and avoid ultrasounds. Then they will leave for good. When animals, especially birds, are exposed to flashing lights, their sensorial receptors are overloaded, causing temporary blindness.

TECHNICAL SPECIFICATIONS Power supply: 230V AC Output Power: 4W peak Output: tweeter M6205 andPT1001 sens.100dB – controlled with 20Vpp Max coverage: 100sqm Size: 190x168x85 mm Ultrasonic frequency set for maximum efficacy Automatic Variation Speed (calibrated to 0.3Hz approximately)

ULTRASONIC PIGEON REPELLER + STROBE LIGHT

US2005/AV

INDUSTRIAL PLANTS

Thanks to its electronic circuit, all the main functions of this ultrasonic device are automatic and efficient. Each circuit, after being assembled, is calibrated so that the ultrasonic waves emitted by the tweeters cause maximum shock to birds, for unprecedented results. Furthermore, the strobe light disturbs and temporarily disorients birds. Equipped with four speakers placed at 360°, this appliance can cover an area of approximately 300 sqm. The device should be placed at the centre of the building. This system is highly recommended to protect large industrial areas such as warehouses, deposits, food factories...

INSTRUCTIONS FOR USE The US2005/AV bird repeller’s range of action is up to 10 linear metres, covering an area of approximately 300 sqm.The speaker produces ultrasonic sounds at an angle of 110 degrees; therefore, assuming the unit is placed in a squared room, the best position would be in a corner facing diagonally the opposite angle. As we are dealing with birds, the unit should be placed at roof level in order to tackle the issue in an effective manner. Ultrasounds affect the birds’ central nervous system: they will leave the area within a fairly short time (this may vary) as they will find the ultrasounds unbearable. Usually birds do not leave straight away: at first they will look for shelters, for example they can hide behind a wall or a piece of furniture to try and avoid ultrasounds. Then they will leave for good. When animals, especially birds, are exposed to flashing lights, their sensorial receptors are overloaded, causing temporary blindness. The strobe light of this device is controlled by a timer: it flashes for 2 minutes then it stops for 10 minutes, but you can change those intervals according to your preferences. TECHNICAL SPECIFICATIONS Power supply: 230V AC Output Power: 16W peak Output: tweeter M6205 and PT1001 sens.100dB – controlled with 20Vpp Max coverage: 300sqm Size: 300x220x180 mm Ultrasonic frequency set for maximum efficacy