catalogues au my

Sewage Pumps 50Hz

Approvals

3

Contents

MA Series page 4

H Series 12

GP Series 14

V Series 17

N Series 18

NA Series 19

DC Series 20

DA Series 22

DW Series 23

SW • SG Series 24

MA

• S

erie

s

4

Quality Sewage Pumps

USE - The submersible pump is widely accepted by the industry all over the world since it was developed, it is the best method to save the cost and easy for ope-ration, the following are the features of SPCO pumps:

• Compact design - The submersible pumps comprise an electric motor and pump portion directly coupled. The advantages are not only smaller in size and cost effective, but also easier in installation and use.

• Lower operation cost - When operating under the water, almost no need basic construction to support the pump, it can be installed in most of the locations.

• Lower installation cost - No need suction pipe, only connecting discharge pipe for operation, the difficulties of suction head, excess piping and valves, as well as shaft alignment can be avoided, also no shelter needed to reduce the cost of basic construction.

• Improvement of work environment - Less space needed at ground level to increase the availability of floor space, the submersible pump can be installed in uneven sump with quiet operation.

The GRS body was bolted and fixed on the sump floor, through the stainless steel chain the guide rail steer the pump to the GRS body, it locks and releases automatically to the discharge connection.To ensure working convenience and safety, theworker can hoist up the pump in short time without emptying the sump or go down the sump to remove the pump, due the pump can be installed and remo-ved easily, whenever the pump is needed inspection or maintenance, the standby pump can be installed to avoid the loss and inconvenience during the down time.

1- coupling elbow…..........…1set

2- guide rail support…..........1 pc…..........1 pc1 pc

3- guide rail upper part..........1 pc

4- SS 304…....…..…...........…1 pc…....…..…...........…1 pc1 pc

Guide Rail System

GRS accessories of guide rail system:

• Drainage of waste water from the liberation tank, purifying tank and sewage tank in water treatment plant.• Drainage of waste water and inclusion containing fibrous admixtures from leather factory, dyeing factory and food processing factory.• Sewage management, accumulated water, septic tank, stock farm.• Pumping sewage from single and multifamily dwellings.• Pumping sewage from hotels, restaurants, schools and public buildings.

Application

MA Series • Sewage Pumps

5

• Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect.• Full product range offers low to high head and flow capabilities, with compact and easy installation. Also, available with GRS Guide Rail system, which allows automa-tic remote connection and disconnection without entry to the sump being required.• Non-clogging vortex impeller design on new MA model ensures no blockage when pumping solids laden liquids.

• International standard design: water proof cable, autocut, dry-motor, silicon carbide mechanical seal, high grade cast iron of-fering highest quality and performance.

Features

Performance Curve

Specification

• Optional cable: H07RN-F

Performance Specification

MA

• S

erie

s

6

• Epoxy resin sealed cable base to prevent water intrusion into motor.

• Drainage of waste water from the libera-tion tank, purifying tank and sewage tank in water treatment plant.• Drainage of waste water and inclusion containing fibrous admixtures from leather factory, dyeing factory and food process-ing factory.• Sewage management, accumulated water, septic tank, stock farm.• Pumping sewage from single and multi-family dwellings.• Pumping sewage from hotels, restaurants, schools and public buildings.

• P/U/E multiple impeller designs to handle solids laden sewage and/or fibrous sub-stance.• Superior abrasion resistant mechanical sealmanufactured with silicon carbide to ensure the best seal effect.best seal effect.• For extra protection, an oil seal ring has been installed under the oil chamber. This lip seal helps prevent the ingress of silt and sand into the lower seal chamber.• Full product range offers low to high head and flow capabilities, with compact and easy installation. Also, available with GRS Guide Rail system, which allows automatic remote connection and disconnection without entry to the sump being required.• Non-clogging impeller design on new MA model ensures no blockage when pumping solids laden liquids.

• International standard design: VCT and 2PNCT cable, autocut, dry-motor, silicon car-bide mechanical seal, high grade cast iron offering highest quality and performance.

• Equipped with an automatic reset motor protector, which prevents the motor from burning dueto high tem-perature/phase loss/voltage drop and/or locked impeller.

Features

Auto cut Cable Base

Application Specification

7

Single channel nonclog impeller, allows large solids passage pre-venting clogging and allowing effective drainage/dewatering for higher head applications with so-lids laden media.

Vortex impellers create a hydrau-lic passage, allowing long fibrous materials to pass through without any contact with the impeller, pre-venting potential clogging by solids laden media.

Semi-open impeller embedded with a tungsten blade to enable cutting of fibrous materials to prevent clogging.

MA-15A • 33 MA-35A MAP 80MAU

P Type Impellers U Type Impellers E Type Impellers

Performance Curve


MA

• S

erie

s

8

Pump surface coated with thickened epoxy resisting corrupted from the corroding liquid. To provide better protection to pump. If pump is going to pumping strong corroding liquid could still chose the better materials.

• Coating

Adopting heavy duty and high quality imported bearing which perform better imported bearing which perform better loading ability to prolong life. The design has qualified with following specification: bearing’s dimension, basic rated load, install environment.

• Bearing

The motor are produced under strict quality control procedure. The stator winding is impregnated with vanish resin and keep in the oven for cure up to 8 hours for whole process to insure better insulating ability. To provide long run life ability.

• Electric motor

Specification

Motor changeComplete series 3 phase 200V~480V, other specified rated voltages

Material change Impeller material stainless steelWD water detector and bearing over heat protector are depend on eachpump.

Lengthen the cableDischarge change

Other change

Special Specification

9

Enforced water resisting ability by epoxy encapsulated at the point where the cord enters the enclosure through the cord grom-met and also at the point where the cord conductors exit the cord jacket, completely to insulating from humidity and water.

Cable base

Installed MTP – Miniature Ther-mal protector which is embedded in the windings of the motor. When the temperature of the windings increases to MTP acting point, and external motor protec-tion circuit is activated to protect the motor from over heating.

Motor over-heat protector

The water flow through motor outer side, cooling down the temperature of motor.Could lower the pump’s operation water level. To reach the lowest possible operation level. Incre-asing the pumping range. (Over 37Kw. CJ is requisite specification.)

Cooling jacket

Installed BTP – Bearing Thermal Protector on the bearing side. When there is abnormal tempe-rature raised over the rated tem-perature. The protector will open cutting off the power supply. To prolong the bearing life.

Bearing over-heat protector (optional)

WD Water detector (optional)Installed in the mechanical seal room to detect any water leakage from water infiltrating. To send a signal to control panel to send war-ning messages. Preventing motor failure. To save maintenance cost.

High quality mechanical seal

Non-clogging impellerNon-clogging impeller design, with high efficiency, excellent performance, and big passing solid. Provide the best solution for drainage of effluent water.

Visible quality

The mechanical seal are made of silicon carbide. The better ability to resist against abrasion and heat with long life to prevent water leaking into the motor.

Visible quality

MA

• S

erie

s

10

Specification

Performance Curves

11

External Dimenstion

H •

Ser

ies

12

H Series • Sewage Pumps

•A precision manufactured motor is achieved utilizing a laminated sheet steel production process combined with the highest standard of quality control. The drive shaft and rotor assembly is heat treated and the stator and wiring impregnated with varnish and then heat dried in an industrial oven. This ensures a 100% quality manufactured motor with stable characteristics and a high efficiency.

•SPCO professional production assembly line, complimented with a synthesized production test ensures the highest level of final pump quality.

• Standard accessories include: VCT cable with an epoxy resin sealed water resistant cable base, AC thermal motor protector, dual mechanical seal and lip seal design.

•U type Vortex Non-clogging impeller or P type Semi-open cutter impeller design, will deal with any wastewater or sewage applica-tion with the best dewatering efficiency.

•Full product line range, providing the best service, with high impact resistance and light weight, for easy of service and transportation.

• The smallest pump in the range is the H-05A, which is an extremely practical pump, has a low temperature oil filled motor and single seal design.

• Drainage of sewage from the building basements, hotel industry, wastes water from factories.

• Drainage of sewage from industrial process factories.

• Emptying of septic tanks, cesspits and sewage pump stations.

•Pumping surface and drainage water from garages and sprinkler systems.

Application

Features

13

H-05A

Semi-open impeller cutting foreign particles, and preventing clog by solids media.

This impeller can generate rapid rotating vortex to handle fluid mixed with long fibber, the majority of abrasive solids do not touch impeller to mini-mize impeller wearing.

H-32T • 33H-31 H-21PH-05U • 21U

Performance Curve


U Type Impeller

P Type Impeller

GP

• Se

ries

14

• Durable heavy duly finned cast iron construction.

• Grinder is complete unit, light weight, compact, and portable, easy to be installed.

• Double protection at connection box: Barrier grommets, barrier epoxy, prevent water contamination of the motor area, assuring a long-term reliable operation. Additionally, epoxy encapsulation and stripped leads positively eliminate wicking from the cable. Two balls bearing construction support shaft and rotor.

• Dry type motor with high efficiency and low current. Equipped with auto reset motor protector, prevent themotor damaged from abnormal heat and current.

• The dual silicone carbide mechanical seal system, extra oil seal protection, and WD water detector protects the motor from sewage contamination, to provide you exceptionally long pump service.

• An excellent vortex impeller and casing water cavity housing design. Provide high efficiency and power saving, handling ground slurry and sewage without clogging or binding.

• Radial cutter and cutter ring: corrosion resistant material, hardened to 55-60 Rockwell C.

Specialized one single strong shaft with impeller and radial cutter, dramatically reduces the torque requirement on the motor, cuts with less horsepower, and increases the pump’s efficiency. What’s more, it prevents clogging with some troublesome objects such as sanitary napkins, plastic, rubber, disposable diapers and cloth items. The design of SPCO grinders prevents clogging, binding and roping, they chop up almost anything and everything in order for you to get a continuous, long-term pumping service.

GP Series • Grinder Pumps

Features

Cutting Ability Demonstration

15

• Used in pressure sewage system.• Drainage of wastewater from individual residences, apartment buildings, recreational developments, motels.• Transferring wastewater of commercial buildings, industrial plants, and wastewater sampling, small hospitals.• Schools, federal, state and local parks wastewater drainage.• To transfer various wastewater and sewage.

Specification

Applications

Performance Curve


GP

• V

• S

erie

s

16

SPCO grinder pumps offer you can economical effective solution for delivering sewage and wastewater. Reliable pumps: An experienced company in pumps manufacturer. Through the constant research, SPCO develop the finest pump construction. Thousands of units are operating trouble-free all over the world. High stability and durability are our promise to the customers. SPCO pumps are your best choice for residential, commercial, resort applications and the low pressure sewer systems. The SPCO pumps provide significant cost savings and working efficiency. SPCO pumps best quality is that you ever experienced.

Outline Dimension

17

• Aquaculture water pumping and drainage for large volume water applications.• Water supply for landscape and water features.• Water extracting from rivers, lakes and reservoirs.• Flood control.

• Large flow capacities achieved with almost no vibration or noise by use of Axial & Mix Flow design. Giving easy operation and energy savings.• Robust construction and compact design with a dry motor, double mechanical seal and impeller flow guide vane for high efficiency.• Simple operation and maintenance. V-200A

• 250AV-300A

Features

Applications

Performance Curve


Specification

V Series • Large Volume Water Pumps

N •

NA

Ser

ies

18

• N precision manufactured motor is achieved utilizing a laminated sheet steel production process combined with the highest standard of quality control. The drive shaft and rotor assembly is heat-treated, the stator and wiring impregnated with varnish and then heat dried in an industrial oven. To ensure manufactured motor with stable characteristics and a high efficiency.• SPCO professional production assembly line, complimented with a synthesized production test ensures the highest level of final pump quality.• Standard accessories include: VCT cable with an epoxy resin sealed water-resistant cable base, AC thermal motor protector, dual mecha-nical seal and lip seal design.• The smallest pump in the range is the N-05A, which is an extremely practical pump, has a low temperature oil filled motor and single seal design.

• Waste water. Sump drainage• Flood control • Dewatering for fish pond or basement and cellars

• The pumps are equipped with wide angle on/off level control float switch for easy and sample automatic operation.

Application:•Slushy water, the pond water in construction site, sewage management.• Model: 1/2~1HP single-phase and 1HP 3-phase pumps.

N-32T • 33 • 43N-21 • 31• 23N-05A

N Series • Waste Water Pumps

Features

Applications

Float Switch Pumps Performance Curve


19

• Equipped with Auto cut, silicon carbide double mechanical seal, epoxy cable base treatment.• Entire cast iron structure and compact design.• Available with GRS guide rall system.• High head and efficiency for wide range design.

• Waste water drainge for all industries.• Pumping surface water, drainage water and floot water.• Extraction of water from river and lake.

NA-48NA-35A

NA-48 pump‘s impeller were designed in high head Pressure reducing design will release the high pressure in volute when operating.

NA Series • Waste Water and Sewage Pumps

Features

Applications

Pressure reducing design

Performance Curve Specification


DC

• S

erie

s

20

Features• Specifically designed for civil engineering applications, where a heavy duty, light weight, top discharge design, is required which is easy to handle. The double outer casing, water cooled motor makes it particularly suitable for low water level applications.• A fully waterproof IP68 stainless steel structure, combined with a high grade silicon carbide double mechanical seals.• The DC range of pumps are compact, strong and easy to operate in any situation.

The DC impeller is manufactured in a high chrome alloy (HCR) steel with a hardness of 55 - 60 Rc., which makes it resistant to prolon-ged use in abrasive applications.

• Civil engineering, dewatering of tunneling and ground works, also for storm water sewers.• Dewatering of fluids contain solid sediments.• Easy of mobility for use by contractors, installers and service industries.

DC-215 DC-32A • 33A

DC Series • Construction Drainage Pumps

Performance Curve

HCR Impeller

Applications


80

Specification

21

• Specifically designed for civil engineering applica-tions for heavy duty, light weight, top outlet required.

• Double outer casing and water cooled motor design extremely appropriate for low water level and exten-ded operation applications.

• Special designed high efficient and wear resistant HCR (high Chrome) impeller.

• Multi impeller design suitable from high head with small capacity to low head with large capacity of appli-cation requirement (H: high, N: normal, L: large)

• Complete stainless steel outer cover of DC5.5~7.5kW exceptional consolidation design weight less than 80kg of light weight structure and diameter 286mm of miniature outlook.

• Optional discharge connection (hose, flange and thread connection)

Features Applications• Civil engineering tunneling and ground works dewatering.

• Dewatering of fluids contain solid sediments.

• Easy of mobility for use by contractors installers and service industries.

SpecificationPerformance Curve


150

DA

• D

W •

Ser

ies

22

• Design for civil engineering, light weight for easy portability, double outer casing water cooling motor make it possible to run the pump to low water level.

• best waterproof structure, automatic rest motor protector and double mechanical seal made of silicon carbide. Durable and leak proof.

• Compact, strong design and easy operation in any place.

• Impeller made of high chrome alloy (HCR) steel with a hardness of 55~60 Rc. Harden and abrasion resistant.

• Equipped with a cast iron agitator to create powerful stirring and pumping action for slurry.

• Civil engineering, dewatering for tunnel engineering also for manhole sewer.

• Dewatering fluid contain solid sediment.

• Mobile use for contractors, installers and industry.

Features

DA Series • Agitator Dewater Pumps


Applications

Performance Curve DA Type

23

• Aquaculture water supply and drainage.• Water supply for agricultural irrigation systems and underground water pumping.• Landscape, water feature and horticulture irrigation.• Extraction of water from rivers, lakes and reservoirs.

•Standard design incorporating: VCT cable and dry motor equipped with thermal AutoCut out to prevent motor from over heating. Abrasion resistant double mechanical seal and additional oil reservoir seal.

• Superior design of water cooled motor to ensure long life operation with high efficiency and energy savings.

• For above or below surface water applications the DW pump strainer can be easily removed and replacedwith a check valve, which allows for dewatering of underground water applications.

DW-215 DW-32A • 33A 43A • 45


Applications

Performance Curve

DW Series • Amphibous Pumps

Features

SW •

SG

• S

erie

s

24

Features

Applications

Viton elastomers used throughout for water proofed structural design for better resistance in corrosive acid and aggressive media.

• Best structure design, dry motor, double mechanical seals, equipped Auto Cut protector, pumps casting, out cover adopt stainless steel material, acid resisting Silicon carbide seals.• This series is suitable for all, light acid, corrosive and/or sea water applications.

• Water drainage for industries.• Sanitary sewer single and multi-families drainage.• Water drainage for chemical, pharmaceutical and metal processing factory.

Viton Packing


SW • SG Series • Stainless Waste and Sewage Water Pumps

SW-05A • 21A SG-05AU • 21AU SG-32 • 33 SG-35

Performance Curve

Wax-off precision castingA precise and advanced stainless wax off casting method is used for the best quality and smooth surface finish.

catalogues au my

Documents