cathodic protection course brochure
TRANSCRIPT
Cathodic Protection: Design and Operation
ABOUT THE INSTRUCTORS
Our instructors are :
NACE certified – Cathodic Protection Technologist Level 3
Experienced Corrosion Engineer
Experienced CP Field Engineers
COURSE SYLLABUS:
Cathodic Protection History
Corrosion Basic
Basic Electricity
Coatings and Cathodic Protection
Sacrificial Anode and Impressed
Current Cathodic Protection
Cathodic Protection Equipments
Measuring Equipment
Field Measurement Techniques
Potential Measurements
Reference Electrode
Transformer-Rectifier Operation
Current, Voltage, and Resistance
Measurements
Soil Resistivity Measurements
Interpretation of Field Data
Training Session: 5 days training with 4 sessions per day from 08.00 to 16.00 on working days; inclusive of one-hour lunch break and 2x coffee break. Training Facilities:
Quality training material (hardcopy and softcopy)
Interactive presentation with discussion
Certificate of Attendance
Upcoming Session: Bandung, 11-15 Feb 2012
Course Overview
This course covers backgrounds theory on corrosion, the basic principles of cathodic protection, basic electricity used for design and monitoring of cathodic protection, followed by practical training on how to use cathodic protection measuring equipment. Participants will gain an understanding of the reasons why cathodic protection is used, understand the basic operation of the equipment used in cathodic protection and be able to make interpretation of cathodic protection measurements, including such aspects as protection criteria and IR drop. Course Objectives:
This course will enable participants to develop an awareness of the importance of cathodic protection to the maintenance and management of assets such as pipelines, tanks, jetties, platforms and an understanding of the basic principles of corrosion and cathodic protection. Participants will also learn the basic operation of test equipment and monitoring regimes and familiarize themselves with the requirements of interference measurements
Participants will also be able to carry out cathodic protections measurements such as pipe-to-soil potential, line current output, electrical continuity, effectiveness of insulating joints, effectiveness of cable insulation, soil resistivity, and transformer-rectifier operation.
Who Should Attend:
Anyone interested in understanding the purpose and use of cathodic protection.
Anyone who interested in developing an understanding of the reasons cathodic protection measurements are taken, knowing the basic operation or the test equipment and being able to carry out cathodic protection measurements.
------------------------------------------------------------------------------------------------------- For further Information regarding this course please contact:
PT Rhenium Indonesia – RHENINDO
Mailing Address : Kota Wisata – Ruko Canadian Broadway CBC-27, Cibubur
Kab Bogor, Jawa Barat 16968 Phone : +62 21 3618 4045 or +62 21 3618 4046
Mobile : +62 818 737 800 (Farida) +62 852 1823 4241 (Sea)
+62 818 0724 2022 (Dinni) Fax : +62 21 8493 5274
Email: [email protected] Website: www.rhenindo.com
-------------------------------------------------------------------------------------------------------
OUR INSTRUCTORS :
Sofyan Pahlevi Mr. Pahlevi graduated from Petroleum Engineering Dept. of ITB. He has undertaken various courses (training and certification) in the field of corrosion monitoring and cathodic protection. His work experience covered extended number of projects in corrosion inspection and monitoring as well as design, installation and commissioning of cathodic protection in many production facilities.
Mr. Pahlevi is a NACE ( National Association of Corrosion Engineers) certified - Cathodic Protection Technologist Level 3.
Akhmad Munthohar Mr. Munthohar has 12 years’ experience in design, calculation, site installation, testing & commissioning, inspection & maintenance, cost estimation of corrosion control systems which includes cathodic protection, coating, internal corrosion monitoring, and material selection.
Personal qualifications: 1. Coating Inspector Level 1 – Indonesian Corrosion Association 2. BSc in Metallurgical Engineering – Universitas Indonesia 3. MSc in Material Engineering, Institut Teknologi Bandung, Indonesia
Dimas Aldiantono Mr. Aldiantono is currently material and corrosion engineer with extensive knowledge on instruments/equipments and softwares required for cathodic protection design and installation. He holds Master degree of Material Science and Engineering from ITB and Bachelor degree of Chemistry at Indonesia University of Education (UPI)
Area of expertise: Detail engineering of impressed current and sacrificial anode cathodic protection for onshore and
offshore structures such as pipelines, platform, jetty, tanks, vessel, plant piping, seawater intake. Design and calculation are performed based on NACE, DNV, ISO, BS, API, ASTM, Norsok.
Pipeline external corrosion indirect assessment by CIPS, DCVG, PCM, ACVG. Familiar with NACE 0502, API 579, API 580, API 581, Muhlbauer’s Pipeline Risk Management
Manual. Knowledge in pipeline engineering codes and standards: DNV OS-F101, ASME B.31.8, API 5L, etc. Metallurgical inspection of sacrificial anode manufacturing as per NACE 0492, NACE 0387, DNV RP
B401, DNV RPF103, ASTM G97. Factory Acceptance Testing (FAT) of Transformer Rectifier and impressed current anode Selection of piping specialty materials: monolithic insulation joint, insulating flange kit Coating selection for atmospheric, splash zone and buried/submerged structures; including field
joint coating and riser coating for pipeline Equipment selection for internal corrosion monitoring and corrosion rate calculation from ER
probe, LPR probe, and corrosion coupon Material selection against corrosion. Proficient in using Intetech Electronic Corrosion Engineer
(ECE) software version 5 and Norsok M-506 spreadsheet. Familiar with NACE MR0175/ISO 15156 and ISO 21457.
Cost estimation and commercial proposal for corrosion control system