catia exams sample questions

12
1 CATIA Certified Professional exams This document is meant to give you an idea of what our exams look like. Questions are multiple-choice with single answer. They may include images. The types of question you will find below is similar in all exams, but the proportion may vary depending on the level of the exam. Expert exams include more context based and problem solving questions than the Specialist ones.

Upload: ikos

Post on 21-Oct-2015

114 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: CATIA Exams Sample Questions

1

CATIA Certified Professional exams

This document is meant to give you an idea of what our exams look like. Questions are multiple-choice with single answer. They may include images. The types of question you will find below is similar in all exams, but the proportion may vary depending on the level of the

exam. Expert exams include more context based and problem solving questions than the Specialist ones.

Page 2: CATIA Exams Sample Questions

2

Question 1. Which one of these menu or short cut selections will exit CATIA?

A. Start and Exit

B. File and Quit

C. Ctrl + G

D. Ctrl + X

E. File and Close

Question 2. Of the following items which will rename an object?

A. Double-click its name in the specification tree

B. Edit the object's definition

C. Use the Rename option in the contextual menu

D. Edit the object's properties

E. Overwrite its name in the specification tree

Question 3. What is this tool used for?

A. To calculate and display mean dimensions

B. To fix or lock all the part dimensions

C. To display all the numerical tolerances

D. To define numerical tolerances on dimensions

E. To remove all the numerical constraints

Page 3: CATIA Exams Sample Questions

3

Question 4.

Which tool is used to get information on the threads and taps that have been created on a part?

A.

B.

C.

D.

E.

Page 4: CATIA Exams Sample Questions

4

Question 5. What would be the result of a draft angle with the following parameters?

Page 5: CATIA Exams Sample Questions

5

A.

B.

Page 6: CATIA Exams Sample Questions

6

C.

D.

Page 7: CATIA Exams Sample Questions

7

E.

Page 8: CATIA Exams Sample Questions

8

Question 6.

Using the part and parameters above, what would be the result of the pocket operation?

A.

Page 9: CATIA Exams Sample Questions

9

B.

C.

D.

Page 10: CATIA Exams Sample Questions

10

E.

Page 11: CATIA Exams Sample Questions

11

Question 7.

Using the sketch profile above, which tool is activated to propagate the offset as shown?

A.

B.

C.

D.

E.

Page 12: CATIA Exams Sample Questions

12

Question 8. When constraining a profile element, what does the default color of purple signify?

A. Being projected from 3D

B. Needing to be updated

C. Published for sharing

D. Currently being selected

E. Being over constrained

Question 9. What are the conditions to be able to re-limit a loft ?

A. The plane normal to the spine defined at the relimitation point must intersect the guide(s)

and the point(s) resulting from this intersection must belong to the section

B. The point(s) resulting from this intersection must belong to the section

C. The plane parallel to the spine defined at the relimitation point must intersect the

guide(s) and the point(s) resulting from this intersection must belong to the section

D. The plane normal to the spine defined at the relimitation point must intersect the guide

Question 10. Which of the following tools will Split a curve or a surface?

A.

B.

C.

D.

E.