cat logo general.pdf
TRANSCRIPT
-
8/10/2019 Catlogo General.pdf
1/37
CORPORACION RODASUR S.A.C.Av. Agustn de la Rosa Toro N 155 -163 - San Luis - Lima - PERU
Tel. 474-0807 Fax : 474-5799 E-mail : [email protected] http://www.rodasur.com
Fiel Service : Max N. Aguilar Zevallos
Catlogo General
NSK es un lder mundial en la fabricacin derodamientos por su intenso compromiso en
desarrollar investigacin de ingeniera, dedicacina modernizar procesos de fabricacin y obsesinpor la calidad.
CORPORACION RODASUR S.A.C.Tiene como
misin el servicio de soluciones tecnolgicas,tratando siempre de adecuarnos a los avances dela ciencia y la tecnologa en coordinacin con elgrupo NSK estableciendo con nuestros clientesen el Per relaciones comerciales de mutuobeneficio.
Nuestro servicio Tcnico y de Ingeniera est a suservicio para cualquier consulta e intercambiandoexperiencia con nuestro clientes mejoremos laeficiencia en los procesos industriales.
-
8/10/2019 Catlogo General.pdf
2/37
-
8/10/2019 Catlogo General.pdf
3/37
-
8/10/2019 Catlogo General.pdf
4/37
-
8/10/2019 Catlogo General.pdf
5/37
-
8/10/2019 Catlogo General.pdf
6/37
-
8/10/2019 Catlogo General.pdf
7/37
-
8/10/2019 Catlogo General.pdf
8/37
-
8/10/2019 Catlogo General.pdf
9/37
B 23B 22
SINGLE-ROW DEEP GROOVE BALL BEARINGS
Bore Diameter 380~600 mm
391 469 2 19.5
396 504 3 40
400 540 4 68
411 489 2 20.5
416 524 3 42
420 580 4 88.4
431 509 2 21.4
436 544 3 43.6440 600 4 92.2
451 529 2 22.3
456 584 3 60.2
466 624 5 106
473 567 2.5 34.3
476 604 3 62.6
486 654 5 123
493 587 2.5 35.4
500 630 4 73.5
506 674 5 127
513 607 2.5 37.2
520 650 4 82
526 694 5 131
543 637 2.5 39.8
550 690 4 89.8
556 754 5 184
573 667 2.5 41.5
580 730 4 105
586 793.5 5 203
613 717 2.5 50.9
620 780 4 120
626 844 5 236
BearingNumbers
Open
Abutment and FilletDimensions (mm)
da(1) Da(1) ramin max max
Mass(kg)
approx
380 480 46 2.1 238 000 375 000 24 200 38 000 17.1 1 000 1 200 6876520 65 4 325 000 510 000 33 000 52 000 16.6 950 1 200 6976560 82 5 455 000 725 000 46 500 74 000 15.9 900 1 100 6076
400 500 46 2.1 241 000 390 000 24 600 40 000 17.2 950 1 200 6880540 65 4 335 000 540 000 34 000 55 000 16.7 900 1 100 6980600 90 5 510 000 825 000 52 000 84 000 15.7 850 1 000 6080
420 520 46 2.1 245 000 410 000 25 000 41 500 17.3 900 1 100 6884
560 65 4 340 000 570 000 35 000 58 500 16.8 900 1 100 6984620 90 5 530 000 895 000 54 000 91 000 15.8 800 1 000 6084
440 540 46 2.1 248 000 425 000 25 300 43 500 17.4 900 1 100 6888600 74 4 395 000 680 000 40 500 69 000 16.6 800 1 000 6988650 94 6 550 000 965 000 56 000 98 500 16.0 750 900 6088
460 580 56 3 310 000 550 000 31 500 56 000 17.1 800 1 000 6892620 74 4 405 000 720 000 41 500 73 500 16.7 800 950 6992680 100 6 605 000 1 080 000 62 000 110 000 15.8 710 850 6092
480 600 56 3 315 000 575 000 32 000 58 500 17.2 800 950 6896650 78 5 450 000 815 000 45 500 83 000 16.6 750 900 6996700 100 6 605 000 1 090 000 61 500 111 000 15.9 710 850 6096
500 620 56 3 320 000 600 000 33 000 61 000 17.3 750 900 68/500670 78 5 460 000 865 000 47 000 88 000 16.7 710 850 69/500720 100 6 630 000 1 170 000 64 000 120 000 16.0 670 800 60/500
530 650 56 3 325 000 625 000 33 000 63 500 17.4 710 850 68/530710 82 5 455 000 870 000 46 500 88 500 16.8 670 800 69/530780 112 6 680 000 1 300 000 69 500 133 000 16.0 600 750 60/530
560 680 56 3 330 000 650 000 33 500 66 500 17.4 670 800 68/560750 85 5 525 000 1 040 000 53 500 106 000 16.7 600 750 69/560820 115 6 735 000 1 500 000 75 000 153 000 16.2 560 670 60/560
600 730 60 3 355 000 735 000 36 000 75 000 17.5 600 710 68/600800 90 5 550 000 1 160 000 56 500 118 000 16.9 560 670 69/600
870 118 6 790 000 1 640 000 80 500 168 000 16.1 530 630 60/600
Boundary Dimensions(mm)
d D B rmin
Limiting Speeds(rpm)
Grease Oil
Factor
f0
Basic Load Ratings(N) {kgf}
Cr C0r Cr C0r
Note (1) When heavy axial loads are applied, increase daand decreaseDa from the above values.
r
r
jD jd
B
ra
jdajDa
ra
Open Type
X Y X Y
0.172 0.19 1 0 0.56 2.300.345 0.22 1 0 0.56 1.990.689 0.26 1 0 0.56 1.711.03 0.28 1 0 0.56 1.551.38 0.30 1 0 0.56 1.452.07 0.34 1 0 0.56 1.313.45 0.38 1 0 0.56 1.155.17 0.42 1 0 0.56 1.046.89 0.44 1 0 0.56 1.00
f0Fa
C0re
Fae
Fr
Fa>e
Fr
Dynamic Equivalent Load
P=XFr+YFa
Static Equivalent Load
>0.8,P0 =0.6Fr+0.5Fa
0.8,P0 =FrFa
Fr
Fa
Fr
SINGLE ROW DEEP GROOVE BALL BEARINGS
-
8/10/2019 Catlogo General.pdf
10/37
B 25B 24
SINGLE-ROW DEEP GROOVE BALL BEARINGS
Bore Diameter 630~800 mm
646 764 3 71.3
656 824 5 163
662 888 6 285
686 804 3 75.4
696 874 5 181
702 948 6 351
726 854 3 92.6
736 924 5 208
770 900 4 110
776 974 5 245
820 960 4 132
826 1 034 5 275
Bearing
Numbers
Open
Abutment and Fillet
Dimensions (mm)
da(1) Da(1) ramin max max
Mass
(kg)
approx
630 780 69 4 420 000 890 000 43 000 90 500 17.3 560 670 68/630850 100 6 625 000 1 350 000 64 000 138 000 16.7 530 630 69/630920 128 7.5 750 000 1 620 000 76 500 165 000 16.4 480 600 60/630
670 820 69 4 435 000 965 000 44 500 98 000 17.4 500 630 68/670900 103 6 675 000 1 460 000 68 500 149 000 16.7 480 560 69/670980 136 7.5 765 000 1 730 000 78 000 177 000 16.6 450 530 60/670
710 870 74 4 480 000 1 100 000 49 000 113 000 17.4 480 560 68/710
950 106 6 715 000 1 640 000 72 500 167 000 16.8 450 530 69/710
750 920 78 5 525 000 1 260 000 53 500 128 000 17.4 430 530 68/7501 000 112 6 785 000 1 840 000 80 000 188 000 16.7 400 500 69/750
800 980 82 5 530 000 1 310 000 54 000 133 000 17.5 400 480 68/8001 060 115 6 825 000 2 050 000 84 500 209 000 16.8 380 450 69/800
Boundary Dimensions
(mm)
d D B rmin
Limiting Speeds(rpm)
Grease Oil
Factor
f0
Basic Load Ratings(N) {kgf}
Cr C0r Cr C0r
Note (1) When heavy axial loads are applied, increase daand decreaseDa from the above values.
r
r
jD jd
B
ra
jdajDa
ra
Open Type
X Y X Y
0.172 0.19 1 0 0.56 2.300.345 0.22 1 0 0.56 1.990.689 0.26 1 0 0.56 1.711.03 0.28 1 0 0.56 1.55
1.38 0.30 1 0 0.56 1.452.07 0.34 1 0 0.56 1.313.45 0.38 1 0 0.56 1.155.17 0.42 1 0 0.56 1.046.89 0.44 1 0 0.56 1.00
f0Fa
C0re
Fae
Fr
Fa>e
Fr
Dynamic Equivalent Load
P=XFr+YFa
Static Equivalent Load
>0.8,P0 =0.6Fr+0.5Fa
0.8,P0 =FrFa
Fr
Fa
Fr
-
8/10/2019 Catlogo General.pdf
11/37
-
8/10/2019 Catlogo General.pdf
12/37
-
8/10/2019 Catlogo General.pdf
13/37
B 31B 30
Table 1 Size Ranges of BearingsUnits : mm
Design Extra Small Ball Bearings Miniature Ball Bearings
Metric Outside diameter D 9 Outside diameter D < 9
Bore diameter d < 10
Inch Outside diameter D 9.525 Outside diameter D < 9.525
Bore diameter d < 10
Please refer to NSK Miniature Ball Bearings (CAT. No. E126) for details.
ZZ ZZS DD VV
EXTRA SMALL BALL BEARINGS AND MINIATURE BALL
BEARINGS
EXTRA SMALL BALL BEARINGS MINIATURE BALL BEARINGS
Metric Design Bore Diameter 1~9mmPages B34 to B37
With Flange Bore Diameter 1~9mmPages B38 to B41
Inch Design Bore Diameter 1.016~9.525mm Pages B42 to B43
With Flange Bore Diameter 1.191~9.525mm Pages B44 to B45
DESIGN AND TYPES
The size ranges of extra small and miniature ball bearings are shown inTable 1. The design, types, and type symbols are shown in Table 2. Thosetypes among them that are listed in the bearing tables are indicated by theshading in Table 2.
-
8/10/2019 Catlogo General.pdf
14/37
B 33B 32
TOLERANCES AND RUNNING ACCURACY
METRIC DESIGN BEARINGS Table 8.2(Pages A60 to A63)
The flange tolerances for metric design bearings are listed in Table 3.
INCH DESIGN BEARINGSTable 8.2 (Pages A60 to A63)
The flange tolerances for inch design flanged bearings are listed in Table 8.8.2(Pages A76 and A77).
INSTRUMENT BALL BEARINGS Table 8.8 (Pages A76 to A77)
RECOMMENDED FITS
Please refer to NSK Miniature Ball Bearings (CAT.No.E126).
INTERNAL CLEARANCES Table 9.10 (Page A89)
LIMITING SPEEDS
The limiting speeds listed in the bearing tables should be adjusted dependingon the bearing toad conditions. Also, higher speeds are attainable by makingchanges in the lubrication method, cage design, etc. Refer to Page A37 for detailedinformation.
Table 2 Design, Types, and Type Symbols
Thin section
With flange
Extended inner
ring
For synchromotors
With flangeand extendedinner ring
Single-Row
DeepGrooveBallBearings
PivotBall
Bearings
T
hrustBall
Bearings
Remarks Single-row angular contact ball bearings are available besides those shownabove.
Type Symbols
Design Types
Metric Inch
Special Remarks
Metric Inch
Shielded sealed
6 R MR bearings are
available.
SMT
Shielded sealed
F6 FR MF bearings are
available.
Shielded bearings RW
are available.
Shielded bearings FRW
are available.
Shielded bearings SR00X00
are available.
BCF
F
Table 3 Flange Tolerances for Metric Flanged Bearings
(1) Tolerances of Flange Outside Diameter Units : m
Nominal Flange Deviation of Flange Outside Diameter
Outside Diameter &D 1SD1(mm) 1 2
over incl high low high low
10 +220 36 0 36
10 18 +270 43 0 43
18 30 +330 52 0 52
(2) Flange Width Tolerances and Running Accuracies Related to Flange Units : m
Normal and Classes 6,5,4,2 Normal and class 6 Class 5 Class 4 Class 2 Class 5 Class 4 Class 2 Class 5 Class 4 Class 2
over incl high low max max max
2.5(1) 6 5 2.5 1.5 8 4 1.5 11 7 3
6 18 5 2.5 1.5 8 4 1.5 11 7 3
18 30 5 2.5 1.5 8 4 1.5 11 7 3
Remarks 2is applied when the flange ou tside diameter is used for positioning.
Notes (1) 2.5mm is included
Deviation of
Flange Width
&C1S
NominalBearing Outside
DiameterD
(mm)
Variation of
Flange Width&C1SVC1S
Variation of BearingOutside SurfaceGeneratrix Inclinationwith Flange Backface
SD1
Use the &BS tolerance for d
of the same bearing of the
same class
Use the &VBStolerance for dof
the same bearingof the same class
Flange Backface
Runout with Raceway
Sea1
-
8/10/2019 Catlogo General.pdf
15/37
-
8/10/2019 Catlogo General.pdf
16/37
-
8/10/2019 Catlogo General.pdf
17/37
-
8/10/2019 Catlogo General.pdf
18/37
EXTRA SMALL BALL BEARINGS MINIATURE BALL BEARINGS
-
8/10/2019 Catlogo General.pdf
19/37
B 42
Inch Design
Bore Diameter 1.016~9.525 mm
B 43
01.9 02.3 0.1 0.04
R 0 ZZ 02.0 01.9 03.1 03.5 0.1 0.09 00.11
R 1 ZZ 02.2 02.3 03.9 04.1 0.1 0.15 00.19
R 1-4 ZZ 02.8 03.9 05.5 05.9 0.1 0.35 00.50
03.2 03.9 0.1 0.10 R 133 ZZS 03.0 04.2 0.1 00.13R 1-5 ZZ 03.6 04.1 06.7 07.0 0.15 0.60 00.72
R 144 ZZ 04.0 03.9 05.5 05.9 0.1 0.25 00.27R 2-5 ZZ 04.0 04.3 07.1 07.3 0.1 0.55 00.72
R 2-6 ZZS 04.4 04.6 08.3 08.2 0.15 0.96 01.13
R 2 ZZ 05.2 04.8 07.5 08.0 0.3 1.36 01.39R 2A ZZ 05.2 04.6 10.7 08.2 0.3 3.30 03.23
R 155 ZZS 04.8 05.5 07.1 07.3 0.1 0.51 00.56
R 156 ZZS 05.6 05.5 07.1 07.3 0.1 0.39 00.42R 166 ZZ 05.6 05.9 08.7 08.8 0.1 0.81 00.85R 3 ZZ 06.8 06.5 10.7 11.2 0.3 2.21 02.79
R 168 BZZ 07.2 07.0 08.7 08.9 0.1 0.58 00.62
R 188 ZZ 07.6 07.4 11.5 11.6 0.15 1.53 02.21
R 4B ZZ 08.4 08.4 13.8 13.8 0.3 4.50 04.43
R 4AA ZZ 09.4 09.0 16.0 16.6 0.4 7.48 09.17
R 1810 ZZ 09.2 09.0 11.5 11.6 0.15 1.56 01.48
R 6 ZZ 12.6 11.9 19.2 20.0 0.4 9.02 11.00
Numbers
Shielded
Bearing
Open
Abutment and Fillet Dimensions(mm)
da db Da Db ramin max max min max
Mass(g)
approxOp en S hi el ded
1.016 3.175 1.191 0.1 80 23 8 2.5 130 000 150 000 R 09
1.191 3.967 1.588 2.380 0.1 138 35 14 3.5 110 000 130 000 R 0
1.397 4.762 1.984 2.779 0.1 231 66 24 6.5 90 000 110 000 R 1
1.984 6.350 2.380 3.571 0.1 310 108 32 11 67 000 80 000 R 1-4
2.380 4.762 1.588 0.1 188 60 19 6 80 000 95 000 R 1334.762 2.380 0.1 143 52 15 5.5 80 000 95 000 7.938 2.779 3.571 0.15 550 175 56 18 60 000 71 000 R 1-5
3.175 6.350 2.380 2.779 0.1 283 95 29 9.5 67 000 80 000 R 1447.938 2.779 3.571 0.1 560 179 57 18 60 000 67 000 R 2-59.525 2.779 3.571 0.15 640 225 65 23 53 000 63 000 R 2-6
9.525 3.967 3.967 0.3 630 218 64 22 56 000 67 000 R 212.700 4.366 4.366 0.3 640 225 65 23 53 000 63 000 R 2A
3.967 7.938 2.779 3.175 0.1 360 149 37 15 53 000 63 000 R 155
4.762 7.938 2.779 3.175 0.1 360 149 37 15 53 000 63 000 R 1569.525 3.175 3.175 0.1 710 270 73 28 50 000 60 000 R 166
12.700 3.967 4.978 0.3 1 300 485 133 49 43 000 53 000 R 3
6.350 9.525 3.175 3.175 0.1 420 204 43 21 48 000 56 000 R 168B12.700 3.175 4.762 0.15 1 080 440 110 45 40 000 50 000 R 188
15.875 4.978 4.978 0.3 1 610 660 164 68 38 000 45 000 R 4B
19.050 5.558 7.142 0.4 2 620 1 060 267 108 36 000 43 000 R 4AA
7.938 12.700 3.967 3.967 0.15 540 276 55 28 40 000 48 000 R 1810
9.525 22.225 5.558 7.142 0.4 3 350 1 410 340 144 32 000 38 000 R 6
Boundary Dimensions(mm)
d D B B1 rmin
Limiting Speeds(rpm)
Grease OilOpen Open
Z ZZ Z
Basic Load Ratings(N) {kgf}
Cr C0r Cr C0r
Remarks 1. When using bearings with a rotating outer ring, please contact NSK if they are shielded.
2. Bearings with double shields (ZZ, ZZS) are also available with single shields (Z, ZS).
r
r
jD jd
B
jD jd
B
r
1
r
jDjD
ra
jdaa
b
ra
ra
jdb
ra
Shielded TypeZZ ZZS
Open Type
EXTRA SMALL BALL BEARINGS MINIATURE BALL BEARINGS
-
8/10/2019 Catlogo General.pdf
20/37
B 44
Inch Design With Flange
Bore Diameter 1.191~9.525 mm
B 45
110 000 130 000 FR 0 FR 0 ZZ 02.0 01.9 0.1 00.11 00.16
90 000 110 000 FR 1 FR 1 ZZ 02.2 02.3 0.1 00.20 00.25
67 000 80 000 FR 1-4 FR 1-4 ZZ 02.8 03.9 0.1 00.41 00.58
80 000 95 000 FR 133 03.2 0.1 00.13 80 000 95 000 FR 133 ZZS 03.0 0.1 00.19
60 000 71 000 FR 1-5 FR 1-5 ZZ 03.6 04.1 0.15 00.68 00.82
67 000 80 000 FR 144 FR 144 ZZ 04.0 03.9 0.1 00.31 00.35
60 000 67 000 FR 2-5 FR 2-5 ZZ 04.0 04.3 0.1 00.62 00.8153 000 63 000 FR 2-6 FR 2-6 ZZS 04.4 04.6 0.15 01.04 01.2556 000 67 000 FR 2 FR 2 ZZ 05.2 04.8 0.3 01.51 01.55
53 000 63 000 FR 155 FR 155 ZZS 04.8 05.5 0.1 00.59 00.67
53 000 63 000 FR 156 FR 156 ZZS 05.6 05.5 0.1 00.47 00.53
50 000 60 000 FR 166 FR 166 ZZ 05.6 05.9 0.1 00.90 00.9843 000 53 000 FR 3 FR 3 ZZ 06.8 06.5 0.3 02.97 03.09
48 000 56 000 FR 168B FR 168 BZZ 07.2 07.0 0.1 00.66 00.7540 000 50 000 FR 188 FR 188 ZZ 07.6 07.4 0.15 01.64 02.4938 000 45 000 FR 4B FR 4B ZZ 08.4 08.4 0.3 04.78 04.78
40 000 48 000 FR 1810 FR 1810 ZZ 09.2 09.0 0.15 01.71 01.63
32 000 38 000 FR 6 FR 6 ZZ 12.6 11.9 0.4 10.10 12.10
Bearing Numbers
Open Shielded
Abutment and FilletDimensions (mm)
da db ramin max max
Mass(g)
approxO pen S hi el de d
1.191 3.967 5.156 1.588 2.380 0.330 0.790 0.1 138 35 14 3.5
1.397 4.762 5.944 1.984 2.779 0.580 0.790 0.1 231 66 24 6.5
1.984 6.350 7.518 2.380 3.571 0.580 0.790 0.1 310 108 32 11
2.380 4.762 5.944 1.588 0.460 0.1 188 60 19 64.762 5.944 2.380 0.790 0.1 143 52 15 5.5
7.938 9.119 2.779 3.571 0.580 0.790 0.15 550 175 56 18
3.175 6.350 7.518 2.380 2.779 0.580 0.790 0.1 283 95 29 9.5
7.938 9.119 2.779 3.571 0.580 0.790 0.1 560 179 57 189.525 10.719 2.779 3.571 0.580 0.790 0.15 640 225 65 239.525 11.176 3.967 3.967 0.760 0.760 0.3 630 218 64 22
3.967 7.938 9.119 2.779 3.175 0.580 0.910 0.1 360 149 37 15
4.762 7.938 9.119 2.779 3.175 0.580 0.910 0.1 360 149 37 15
9.525 10.719 3.175 3.175 0.580 0.790 0.1 710 270 73 2812.700 14.351 4.978 4.978 1.070 1.070 0.3 1 300 485 133 49
6.350 9.525 10.719 3.175 3.175 0.580 0.910 0.1 420 204 43 2112.700 13.894 3.175 4.762 0.580 1.140 0.15 1 080 440 110 4515.875 17.526 4.978 4.978 1.070 1.070 0.3 1 610 660 164 68
7.938 12.700 13.894 3.967 3.967 0.790 0.790 0.15 540 276 55 28
9.525 22.225 24.613 7.142 7.142 1.570 1.570 0.4 3 350 1 410 340 144
Boundary Dimensions(mm)
d D D1 B B1 C1 C2 rmin
Limiting Speeds(rpm)Grease OilOpen Open
Z ZZ Z
Basic Load Ratings(N) {kgf}
Cr C0r Cr C0r
Remarks 1. When using bearings with a rotating outer ring, please contact NSK if they are shielded.
2. Bearings with double shields (ZZ, ZZS) are also available with single shields (Z, ZS).
r
r
jD jd
B
jDjD jDjd
BC
1
r
r
1
1
C2
1
ra
jda
ra
jdb
Shielded TypeZZ ZZS
Open Type
-
8/10/2019 Catlogo General.pdf
21/37
B 47B 46
Table 1 Standard Cages for Angular Contact Ball Bearings
Contact
angle
ANGULAR CONTACT BALL BEARINGS
SINGLE-ROW AND MATCHED
ANGULAR CONTACT BALL BEARINGSBore Diameter 10~ 50mmPages B50~B55
Bore Diameter 60~120mmPages B56~B61
Bore Diameter 130~200mmPages B62~B65
DOUBLE-ROW ANGULAR CONTACT Bore Diameter 10~ 85mmPages B66~B67
BALL BEARINGS
FOUR-POINT CONTACT BALL BEARINGSBore Diameter 30~200mmPages B68~B71
DESIGN, TYPES, AND FEATURES
SINGLE-ROW ANGULAR CONTACT BALL BEARINGS
Since these bearings have a contact angle, they can sustain significant axialloads in one direction together with radial loads. Because of their design, whena radial load is applied, an axial force component is produced; therefore, twoopposed bearings or a combination of more than two must be used.
Since the rigidity of single-row angular contact ball bearings can beincreased by preloading, they are often used in the main spindles of machinetools, for which high running accuracy is required. (Refer to Chapter 10,Preload, Page A96).
Usually, the cages for angular contact ball bearings with a contact angle of30 (Symbol A) or 40(Symbol B) are in accordance with Table 1,butdepending on the application, machined synthetic resin cages or moldedpolyamide resin cages are also used. The basic load ratings given in thebearing tables are based on the cage classification listed in Table 1.
Though the figures in the bearing tables (Pages B50 to B61; bearing borediameters of 10 to 120) show bearings with single-shoulder-type inner rings,both-shoulder-type bearings are also available. Please consult NSK for moredetailed information.
In addition, for bearings with the same serial number, if the type of cagesare different, the number of balls may also be different. In such a case, the
load rating will differ from the one listed in the bearing tables.Angular Contact Ball Bearings with contact angles of 15 (Symbol C) and
25 (Symbol A5) are primarily for high precision or high speed applications,and machined brass or synthetic resin cages or molded polyamide cages areused.
The maximum operating temperature of molded polyamide cages is 120C.
Series Pressed Steel Cages Machined Brass Cages
79A5, C 7900~7940
70A 7000~7018 7019~7040
70C 7000~7022
72A, B 7200~7222 7224~7240
72C 7200~7240
73A, B 7300~7320 7321~7340
-
8/10/2019 Catlogo General.pdf
22/37
-
8/10/2019 Catlogo General.pdf
23/37
-
8/10/2019 Catlogo General.pdf
24/37
-
8/10/2019 Catlogo General.pdf
25/37
-
8/10/2019 Catlogo General.pdf
26/37
-
8/10/2019 Catlogo General.pdf
27/37
-
8/10/2019 Catlogo General.pdf
28/37
-
8/10/2019 Catlogo General.pdf
29/37
-
8/10/2019 Catlogo General.pdf
30/37
DOUBLE-ROW ANGULAR CONTACT BALL BEARINGS
Bore Diameter 10~85 mm
-
8/10/2019 Catlogo General.pdf
31/37
B 66 B 67
10 30 14.3 0.6 7 150 3 900 730 400 17 000 22 000 520012 32 15.9 0.6 10 500 5 800 1 070 590 15 000 20 000 5201
15 35 15.9 0.6 11 700 7 050 1 190 715 13 000 17 000 520242 19 1 17 600 10 200 1 800 1 040 11 000 15 000 5302
17 40 17.5 0.6 14 600 9 050 1 490 920 11 000 15 000 520347 22.2 1 21 000 12 600 2 140 1 280 10 000 13 000 5303
20 47 20.6 1 19 600 12 400 2 000 1 270 10 000 13 000 520452 22.2 1.1 24 600 15 000 2 510 1 530 9 000 12 000 5304
25 52 20.6 1 21 300 14 700 2 170 1 500 8 500 11 000 520562 25.4 1.1 32 500 20 700 3 350 2 110 7 500 10 000 5305
30 62 23.8 1 29 600 21 100 3 000 2 150 7 100 9 500 520672 30.2 1.1 40 500 28 100 4 150 2 870 6 300 8 500 5306
35 72 27 1.1 39 000 28 700 4 000 2 920 6 300 8 000 520780 34.9 1.5 51 000 36 000 5 200 3 700 5 600 7 500 5307
40 80 30.2 1.1 44 000 33 500 4 500 3 400 5 600 7 100 520890 36.5 1.5 56 500 41 000 5 800 4 200 5 300 6 700 5308
45 85 30.2 1.1 49 500 38 000 5 050 3 900 5 000 6 700 5209100 39.7 1.5 68 500 51 000 7 000 5 200 4 500 6 000 5309
50 90 30.2 1.1 53 000 43 500 5 400 4 400 4 800 6 000 5210110 44.4 2 81 500 61 500 8 300 6 250 4 300 5 600 5310
55 100 33.3 1.5 56 000 49 000 5 700 5 000 4 300 5 600 5211120 49.2 2 95 000 73 000 9 700 7 450 3 800 5 000 5311
60 110 36.5 1.5 69 000 62 000 7 050 6 300 3 800 5 000 5212130 54 2.1 125 000 98 500 1 2 8 00 1 0 00 0 3 400 4 500 5312
65 120 38.1 1.5 76 500 69 000 7 800 7 050 3 600 4 500 5213140 58.7 2.1 142 000 113 000 1 4 5 00 1 1 50 0 3 200 4 300 5313
70 125 39.7 1.5 94 000 82 000 9 600 8 400 3 400 4 500 5214150 63.5 2.1 159 000 128 000 1 6 2 00 1 3 10 0 3 000 3 800 5314
75 130 41.3 1.5 93 500 83 000 9 550 8 500 3 200 4 300 521580 140 44.4 2 99 000 93 000 10 100 9 500 3 000 3 800 521685 150 49.2 2 116 000 110 000 1 1 8 00 1 1 20 0 2 800 3 600 5217
Boundary Dimensions(mm)
d D B rmin
Limiting Speeds(rpm)
Grease Oil
Basic Load Ratings
(N) {kgf}Cr C0r Cr C0r
BearingNumbers
jD jd
a0
r
r
B
jD jd
ra
ra
aa
14.5 15 25 0.6 0.05016.7 17 27 0.6 0.060
18.3 20 30 0.6 0.07022.0 21 36 1 0.11
20.8 22 35 0.6 0.09025.0 23 41 1 0.14
24.3 26 41 1 0.1226.7 27 45 1 0.23
26.8 31 46 1 0.1931.8 32 55 1 0.34
31.6 36 56 1 0.2936.5 37 65 1 0.51
36.6 42 65 1 0.4341.6 44 71 1.5 0.79
41.5 47 73 1 0.5745.5 49 81 1.5 1.05
43.4 52 78 1 0.6250.6 54 91 1.5 1.4
45.9 57 83 1 0.6755.6 60 100 2 1.95
50.1 64 91 1.5 0.9660.6 65 110 2 2.3
56.5 69 101 1.5 1.3569.2 72 118 2 3.15
59.7 74 111 1.5 1.6572.8 77 128 2 3.85
63.8 79 116 1.5 1.878.3 82 138 2 4.9
66.1 84 121 1.5 1.969.6 90 130 2 2.575.3 95 140 2 3.4
Load CenterSpacings(mm)a0
Mass(kg)
approx
Abutment and FilletDimensions (mm)
da Da ramin max max
Fa/Fre Fa/Fr>e
X Y X Ye
1 0.92 0.67 1.41 0.68
Dynamic Equivalent Load
P=X Fr+Y Fa
Static Equivalent Load
P0 =Fr+0.76Fa
FOUR-POINT CONTACT BALL BEARINGS
Bore Diameter 30~95 mm
-
8/10/2019 Catlogo General.pdf
32/37
B 69B 68
30 62 16 1 31 000 45 000 3 150 4 600 8 500 12 00072 19 1.1 46 000 63 000 4 700 6 450 8 000 11 000
35 72 17 1.1 41 000 61 500 4 200 6 250 7 500 10 00080 21 1.5 55 000 80 000 5 600 8 150 7 100 9 500
40 80 18 1.1 49 000 77 500 5 000 7 900 6 700 9 00090 23 1.5 67 000 100 000 6 850 10 200 6 300 8 500
45 85 19 1.1 55 000 88 500 5 600 9 000 6 300 8 500100 25 1.5 87 500 133 000 8 900 13 500 5 600 7 500
50 90 20 1.1 57 000 97 000 5 850 9 900 5 600 8 000110 27 2 102 000 159 000 10 400 16 200 5 000 6 700
55 100 21 1.5 71 000 122 000 7 200 12 500 5 300 7 100120 29 2 118 000 187 000 12 000 19 100 4 500 6 300
60 110 22 1.5 85 500 150 000 8 750 15 300 4 800 6 300130 31 2.1 135 000 217 000 13 800 22 200 4 300 5 600
65 120 23 1.5 97 500 179 000 9 950 18 300 4 300 6 000140 33 2.1 153 000 250 000 15 600 25 500 3 800 5 300
70 125 24 1.5 106 000 197 000 10 800 20 100 4 000 5 600150 35 2.1 172 000 285 000 17 500 29 100 3 600 5 000
75 130 25 1.5 110 000 212 000 11 200 21 700 3 800 5 300
160 37 2.1 187 000 320 00019 100 33 000
3 400 4 80080 125 22 1.1 77 000 167 000 7 850 17 000 3 800 5 300
140 26 2 124 000 236 000 12 600 24 100 3 600 5 000170 39 2.1 202 000 360 000 20 600 37 000 3 200 4 300
85 130 22 1.1 79 000 176 000 8 050 18 000 3 800 5 000150 28 2 143 000 276 000 14 600 28 200 3 400 4 800180 41 3 218 000 405 000 22 300 41 000 3 000 4 000
90 140 24 1.5 94 000 208 000 9 600 21 200 3 400 4 800160 30 2 164 000 320 000 16 700 32 500 3 200 4 300190 43 3 235 000 450 000 23 900 45 500 2 800 3 800
95 145 24 1.5 96 500 220 000 9 800 22 500 3 400 4 500170 32 2.1 177 000 340 000 18 000 35 000 3 000 4 000200 45 3 251 000 495 000 25 600 50 500 2 600 3 600
Boundary Dimensions
(mm)
d D B rmin
Limiting Speeds
(rpm)Grease Oil
Basic Load Ratings
(N) {kgf}
Ca C0a Ca C0a
QJ 206 32.2 36 56 1 0.24QJ 306 35.7 37 65 1 0.42
QJ 207 37.5 42 65 1 0.35QJ 307 40.3 44 71 1.5 0.57
QJ 208 42.0 47 73 1 0.45QJ 308 45.5 49 81 1.5 0.78
QJ 209 45.5 52 78 1 0.52QJ 309 50.8 54 91 1.5 1.05
QJ 210 49.0 57 83 1 0.59QJ 310 56.0 60 100 2 1.35
QJ 211 54.3 64 91 1.5 0.77QJ 311 61.3 65 110 2 1.75
QJ 212 59.5 69 101 1.5 0.98QJ 312 66.5 72 118 2 2.15
QJ 213 64.8 74 111 1.5 1.2QJ 313 71.8 77 128 2 2.7
QJ 214 68.3 79 116 1.5 1.3QJ 314 77.0 82 138 2 3.18
QJ 215 71.8 84 121 1.5 1.5QJ 315
82.3 87 148 23.9
QJ 1016 71.8 87 118 1 1.05QJ 216 77.0 90 130 2 1.85QJ 316 87.5 92 158 2 4.6
QJ 1017 75.3 92 123 1 1.1QJ 217 82.3 95 140 2 2.2QJ 317 92.8 99 166 2.5 5.34
QJ 1018 80.5 99 131 1.5 1.45QJ 218 87.5 100 150 2 2.75QJ 318 98.0 104 176 2.5 6.4
QJ 1019 84.0 104 136 1.5 1.5QJ 219 92.8 107 158 2 3.35QJ 319 103.3 109 186 2.5 7.4
Load Center
Spacings(mm)a0
BearingNumbers
Abutment and Fillet
Dimensions (mm)
da Da ramin max max
Mass
(kg)
approx
Remarks When using four-point contact ball bearings, please contact NSK.
r
r
jD jd
a
B
0
r
jD jd
a
ra
aa
Dynamic Equivalent Load
Pa=Fa
Static Equivalent Load
P0a=Fa
-
8/10/2019 Catlogo General.pdf
33/37
-
8/10/2019 Catlogo General.pdf
34/37
B 73B 72
b1Bearing No. b1 (mm)
2222(K), 2316(K) 0.5
2319(K), 2320(K) 0.52321 , 2322(K)
1318(K) 1.5
1319(K) 2
1320(K), 1321 31322(K)
SELF-ALIGNING BALL BEARINGS
SELF-ALIGNING BALL BEARINGS Bore Diameter 5~110mmPages B74~B79
DESIGN, TYPES, AND FEATURES
The outer ring has a spherical raceway and its center of curvaturecoincides with that of the bearing; therefore, the axis of the inner ring, ballsand cage can deflect to some extent around the bearing center. This type isrecommended when the alignment of the shaft and housing is difficult andwhen the shaft may bend. Since the contact angle is small, the axial loadcapacity is low.
Pressed steel cages are usually used.
PROTRUSION AMOUNT OF BALLS
Among self-aligning ball bearings, there are some in which the ballsprotrude from the side face as shown below. This protrusion amount b1 islisted in the following table.
TOLERANCES AND RUNNINGACCURACY Table 8.2 (Pages A60~A63)
RECOMMENDED FITSTable 9.2 (Page A84)Table 9.4 (Page A85)
INTERNAL CLEARANCETable 9.12 (Page A90)
PERMISSIBLE MISALIGNMENT
The permissible misalignment of self-aligning ball bearings isapproximately 0.07 to 0.12 radian (4 to 7) under normal loads. However,depending on the surrounding structure, such an angle may not bepossible. Use care in the structural design.
-
8/10/2019 Catlogo General.pdf
35/37
-
8/10/2019 Catlogo General.pdf
36/37
-
8/10/2019 Catlogo General.pdf
37/37