cbs customized body system...fort revolving shelves for optimum equip-ment removal and safe storage;...

2
Pursuant to ÖBFVRL / Felixdorf Volunteer Fire Service CBS Customized Body System GTLF 6000/500 Basis specifications Type: Scania P 400 DB 6x2*4MNB Engine output: 294 kW (400 PS) at 1.900 min -1 Euro 5 Transmission: 12+2 gearbox, GRS 905, Opticruise Wheelbase: 4,300 mm Cabin: Crew: 1 + 6 (2/3/2) Original Scania crew cabin with three SCBA fix- tures facing backwards and one for the co-driver integrated into the seat Fixed steps mounted in front of the crew cabin doors Helmet holders for the driver and co-driver Action Tower in the crew cabin facing forwards Superstructure: Modular concept consisting of laser-cut, beveled, bonded and bolted aluminum sheets. The complete superstructure is mounted on a sub- frame, which is attached to the chassis frame by special conical bearings. Equipment compartments: Deep equipment compartments and COM- FORT revolving shelves for optimum equip- ment removal and safe storage; including fix- ture block lighting Folding steps for the storage compartments, color logic system for handles and controls. Payload: According to BRL with additional equipment as required Two roof chests with lids and interior lighting Control system: Rosenbauer LCS 2.0 (Logic Control System), based on CAN bus technology for the: rotating beacons, horn, front flashing lights, surround- ing area lighting, traffic direction unit, remote generator start and “engine data” monitoring, remote starting, chassis tank gauge, pump, etc. Roof chest open display Pump pressure governor

Upload: others

Post on 24-Sep-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CBS Customized Body System...FORT revolving shelves for optimum equip-ment removal and safe storage; including fix-ture block lighting › Folding steps for the storage compartments,

Pursuant to ÖBFVRL / Felixdorf Volunteer Fire Service

CBS Customized Body System

GTLF 6000/500

Basis specifications

▪ Type: Scania P 400 DB 6x2*4MNB

▪ Engine output: 294 kW (400 PS) at 1.900 min-1

Euro 5

▪ Transmission: 12+2 gearbox, GRS 905, Opticruise

▪ Wheelbase: 4,300 mm

▪ Cabin:

› Crew: 1 + 6 (2/3/2)

› Original Scania crew cabin with three SCBA fix-tures facing backwards and one for the co-driver integrated into the seat

› Fixed steps mounted in front of the crew cabin doors

› Helmet holders for the driver and co-driver

› Action Tower in the crew cabin facing forwards

▪ Superstructure:

› Modular concept consisting of laser-cut, beveled, bonded and bolted aluminum sheets.

› The complete superstructure is mounted on a sub-frame, which is attached to the chassis frame by special conical bearings.

▪ Equipment compartments:

› Deep equipment compartments and COM-FORT revolving shelves for optimum equip-ment removal and safe storage; including fix-ture block lighting

› Folding steps for the storage compartments, color logic system for handles and controls.

▪ Payload:

› According to BRL with additional equipment as required

› Two roof chests with lids and interior lighting

▪ Control system:

› Rosenbauer LCS 2.0 (Logic Control System), based on CAN bus technology for the: rotating beacons, horn, front flashing lights, surround-ing area lighting, traffic direction unit, remote generator start and “engine data” monitoring, remote starting, chassis tank gauge, pump, etc.

› Roof chest open display

› Pump pressure governor

Page 2: CBS Customized Body System...FORT revolving shelves for optimum equip-ment removal and safe storage; including fix-ture block lighting › Folding steps for the storage compartments,

Vers. 1.0 ThSu_2012-11-14

▪ Extinguishing systems:

› Type: NH30 combined normal/high-pressure pump

› with encapsulation and operating display

› Output: 3,000 l/min at 10 bar, 400 l/min at 40 bar

› Water tank volume: 6,000 l with automatic level regulation

› Foam tank volume: 500 l

› Z4 proportioning device in compartment 4 for quick foam attack

› FIXMIX automatic foam pre-proportioning sys-tem, 1% + 3% + 6%

▪ Pressure outlets:

› 2 x manual B-pressure outlets left at the rear and 1 x manual B- pressure outlet at the side on the right

▪ Quick attack unit:

› HP reel with 60 m 25 mm hose in compartment 7 with hose window and electrical rewind

▪ Water monitor:

› RM 15C roof monitor, with 1,500 l/min throw out-put, electrical remote control, with remote radio operation

▪ Winch:

› Rotzler TR080/ 5 integrated hydraulic frame winch, 2-gear, with constant tensile force along the entire rope length.

▪ Lighting mast:

› Pneumatically extendable telescopic lighting mast

› 8 x 42 W LED searchlights integrated between compartments 1/2

▪ Electrical systems:

› Rear-mounted, LED technology traffic direction unit

› LED blue flashing lights, countersunk into the

radiator grille

› Maneuverable 24 V searchlight incl. mirror frame mounting

› Surrounding area lighting with 3 LED spread beam lights on both the left and right of the roof gallery and 2 LED spread beam lights at the rear

› 2 front-mounted LED searchlights

› Flashing lights in the fold-down steps

› Reversing camera

Contact

Rosenbauer International Aktiengesellschaft Paschinger Straße 90 4060 Leonding, Austria Tel.: +43 732 6794-0 Fax: +43 732 6794-91 www.rosenbauer.com

Dimensions and weight

L x W x H 9,300 x 2,550 x 3,600 mm Permitted total weight 26,000 kg

Text and illustrations are not binding. The illustrations may show optional extras only available at extra charge. Rosenbauer reserves the right to alter specifications and dimensions given herein without prior notice.

CBS Customized Body System

GTLF 6000/500