cdo
DESCRIPTION
Fixed incomeTRANSCRIPT
Prepared by – Sameer Vijay Gunjal
Mortgage Backed Sector of The Bond Market
Prepared by – Sameer Vijay Gunjal2
Characteristics of Mortgage Loans
• A mortgage is a loan that is collateralized with a specific piece of real property, either residential or commercial.
• The interest rate on the loan is called the mortgage rate or contract rate.
• There are four important features of fixed-rate, level payment, fully amortized mortgage loans to remember when we move on to mortgage-backed securities (MBS):– The amount of the principal payment increases as time passes.– The amount of interest decreases as time passes.– The servicing fee also declines as time passes.– The ability of the borrower to prepay results in prepayment risk.
Prepayments and curtailments reduce the amount of interest the lender receives over the life of the mortgage and cause the principal to be repaid sooner.
• Servicing spread is usually built into the mortgage rate.
Prepared by – Sameer Vijay Gunjal3
Example : 1
• Consider a 30-year, $500,000, level payment, fully amortized mortgage with a fixed rate of 12% compounded monthly.
• Calculate the monthly payment and prepare an amortization schedule for the first three months.
Prepared by – Sameer Vijay Gunjal4
Solution :
Prepared by – Sameer Vijay Gunjal5
Prepayment Risk
• Payments in excess of the required monthly amount are called prepayments
• Prepayments for less than the outstanding principal balance are called curtailments.
• As interest paid is on the outstanding loan balance, prepayment or curtailment will reduce the amount of interest the lender receives over the life of the loan. Thus resulting into a prepayment risk.
Prepared by – Sameer Vijay Gunjal6
Mortgage Passthrough Securities
• A mortgage passthrough security represents a claim against a pool of mortgages.
• Any number of mortgages may be used to form the pool.
• A mortgage that is included in the pool is called a securitized mortgage.– Passthrough investors receive the monthly cash flows
generated by the underlying pool.–More than one class of passthrough security may be
issued against a single mortgage pool, each representing a unique claim on the pool’s cash flows.
Prepared by – Sameer Vijay Gunjal7
Mortgage Passthrough Securities
• The most important characteristic of passthrough securities is their prepayment risk; because the mortgages used as collateral for the passthrough can be prepaid, the passthroughs themselves have significant prepayment risk.
• Important points regarding prepayment are – How to measure prepayment speeds– The factors that affect prepayment speeds – How to create securities collateralized by passthroughs that have different
levels of prepayment risk and are therefore more attractive to investors
Prepared by – Sameer Vijay Gunjal8
Prepayment Benchmarks
• Prepayments cause uncertainty in timing and amount of cash flows
• It is necessary to make specific assumptions about the rate at which prepayment of the pooled mortgages occurs when valuing passthrough securities.
• Industry Conventions– Conditional prepayment rate (CPR) is the annual rate at
which a mortgage pool balance is assumed to be prepaid during the life of the pool.
– Public Securities Association (PSA) prepayment benchmark.• A mortgage pool’s CPR is a function of past prepayment
rates and economic conditions.
Prepared by – Sameer Vijay Gunjal9
CPR
• The single monthly mortality rate (SMM) is derived from the conditional prepayment rate (CPR) and is used to estimate monthly prepayments for a mortgage pool.– SMM = 1 – (1 – CPR)1/12
• The estimated prepayment for any month m can be expressed as:– Prepayment, m = SMM × (mortgage balance at
beginning of month m – scheduled principal payment for month m)
Prepared by – Sameer Vijay Gunjal10
PSA
• The PSA standard benchmark is referred to as 100% PSA (or just 100 PSA). 100 PSA assumes the following graduated CPRs for 30-year mortgages:– CPR = 0.2% for the first month after origination,
increasing by 0.2% per month up to 30 months. • For example, the CPR in month 14 is 14 (0.2%) = 2.8%.
– CPR = 6% for months 30 to 360.
Prepared by – Sameer Vijay Gunjal11
Example : 2
• Compute the CPR and SMM for the 5th and 25th months, assuming 100 PSA and 150 PSA.
Prepared by – Sameer Vijay Gunjal12
• PSA = 100– CPR = 5 * 0.2% = 1%– 100 PSA = 1 * 0.01 = 1%– SMM = 1 – (1 – 1%)^(1/12) = 0.000837
– CPR = 25 * 0.2% = 5%– 100 PSA = 1 * 0.05 = 5%– SMM = 1 – (1 – 5%)^(1/12) = 0.004265
• PSA = 150– CPR = 5 * 0.2% = 1%– 100 PSA = 1.5 * 0.01 = 1.5%– SMM = 1 – (1 – 1.5%)^(1/12) = 0.001259
– CPR = 25 * 0.2% = 5%– 100 PSA = 1.5 * 0.05 = 7.5%– SMM = 1 – (1 – 7.5%)^(1/12) = 0.006476
Prepared by – Sameer Vijay Gunjal13
Example : 3
• Assume that you have invested in a mortgage pool with a $100,000 principal balance outstanding at the beginning of the 25th month.
• The scheduled monthly principal payment for month 25 is $28.61.
• The CPR and SMM, assuming 100 PSA, are 5% and 0.4265%, respectively.
• Compute the prepayment for the 25th month.
Prepared by – Sameer Vijay Gunjal14
Solution :
• Prepayment, m = SMM × (mortgage balance at beginning of month m – scheduled principal payment for month m)
• m = 0.4265% × (1,00,000 – 28.61) = 426.38
Prepared by – Sameer Vijay Gunjal15
Factors affecting prepayments
– Prevailing mortgage rate• The spread between the current mortgage rate and the original
mortgage rate is the most important factor. Historically, if mortgage interest rates fall more than 2%, refinancing activity increases dramatically.
• The path that mortgage rates follow on their way to the current level will affect prepayments today. When mortgage rates drop, rebound, and drop again, most homeowners have already refinanced. This tendency is called refinancing burnout.
– Housing turnover increases as mortgage rates fall and housing becomes more affordable, as the general level of economic activity increases. The result is higher prepayments.
– Prepayments are also affected by seasoning and property location.
Prepared by – Sameer Vijay Gunjal16
Types of Prepayment Risk
• Contraction Risk– Contraction risk for an MBS refers to undesirable
consequences of declining interest rates: • MBS exhibit negative convexity, and • Cash flows must be reinvested at a lower rate.
• Extension Risk– Extension risk refers to the drop in bond prices and the
slowing of prepayments as interest rates increase. Investors would prefer to recapture their principal without a capital loss and reinvest at the current higher rates.
Prepared by – Sameer Vijay Gunjal17
Relevance of Average Life of Mortgage in MBS investments
• Investors calculate average life or weighted average life for passthrough securities since prepayment risk usually results in the stated maturity of a passthrough being different than its actual life.– As mortgage rates fall, prepayment rates increase, and
the average life of a passthrough security decreases.– As mortgage rates rise, prepayment rates slow, and the
average life of a passthrough security increases.
Prepared by – Sameer Vijay Gunjal18
Collateralized Mortgage Obligation (CMO)
• CMOs are securities issued against passthrough securities (i.e., they are securities secured by other securities) for which the cash flows have been reallocated to different bond classes called tranches, each having a different claim against the cash flows of the mortgage passthroughs or pool from which they were derived.
• Each tranche has a different mixture of contraction and extension risk.
• CMOs can be matched to the unique asset/liability needs of investors.
Prepared by – Sameer Vijay Gunjal19
Sequential Pay CMO
• Sequential-pay tranches are a common arrangement for separating mortgage cash flows into classes to create CMOs where each class of bond is retired sequentially.
• Consider a CMO with 2 tranches– Tranche A and B (short tranche)– Both tranches have same interest, however the
prepayment would be directed towards tranche B only, till it is completely exhausted
– Thus the extension risk is low for tranche B– Contraction risk is low for tranche A
• Thus the risk has been redistributed amongst the bondholders
Prepared by – Sameer Vijay Gunjal20
Example : 4
• In the adjacent schedule payments and projected prepayments are based on a prepayment speed of 150 PSA.
• Payments to the two sequential-pay tranches are made first to Tranche A and then to Tranche B
• Calculate the principal payments, ending principal balance, and interest payments to each tranche in the first month using the data
Prepared by – Sameer Vijay Gunjal21
Solution :
• Tranche A gets the entire principal payment as well as its share of the interest. Tranche B only receives interest.– Tranche A:• Tranche A principal payment $391,128• Tranche A ending principal = $200,000,000 - $391,128 =
$199,608,872• Tranche A interest $200,000,000 * 0.085 / 12 = 1,416,667
– Tranche B:• Tranche B principal payment = $0• Tranche B ending principal = $50,000,000 - $0 = $50,000,000• Tranche B interest $50,000,000 * 0.085 / 12 = $354,167
Prepared by – Sameer Vijay Gunjal22
Example : 5
• In the adjacent schedule payments and projected prepayments are based on a prepayment speed of 150 PSA.
• Payments to the two sequential-pay tranches are made first to Tranche A and then to Tranche B
• Calculate the principal payments, ending principal balance, and interest payments to each tranche in the 185th month using the data
Prepared by – Sameer Vijay Gunjal23
Solution :
• Tranche A gets the entire principal payment as well as its share of the interest. Tranche B only receives interest.– Tranche A:• Tranche A principal payment $405,694• Tranche A ending principal = $405,694 - $405,694 = $0• Tranche A interest 405,694 * 0.085 / 12 = 2,874
– Tranche B:• Tranche B principal payment = 536,542 - 405,694 = 130,848• Tranche B ending principal = $50,000,000 - $ 130,848 = $
49,869,152• Tranche B interest $50,000,000 * 0.085 / 12 = $354,167
Prepared by – Sameer Vijay Gunjal24
Other Features of Sequential CMO
• The time period between the first and last principal payments on a CMO tranche is called the principal pay down window.
• For many sequential-pay CMO structures, the last tranche to receive principal also does not receive current interest until the other tranches have been paid off.
• This tranche is called the Z-tranche or accrual tranche, and the securities that represent a claim against its cash flows are called Z-bonds or accrual bonds.
Prepared by – Sameer Vijay Gunjal25
Planned Amortization Class (PAC) CMO
• PAC is a tranche that is amortized based on a sinking fund schedule that is established within a range of prepayment speeds called the initial PAC collar
• There are two principal repayment schedules associated with a PAC bond, one for the lower prepayment rate and one for the upper rate of the initial PAC collar. PAC bondholders are guaranteed a principal payment that is equal to the lesser amount prescribed by these two repayment schedules
Prepared by – Sameer Vijay Gunjal26
Planned amortization schedule for a PAC I tranche with an initial collar of 90 PSA to 300 PSA
• Lower of the two would be paid, thus the variability in prepayment is reduced and prepayment is kept to a minimum, making the predictability of life of the PAC higher, thus reducing the prepayment risk to bondholder
Prepared by – Sameer Vijay Gunjal27
Support Tranche
• PAC bond work is packaged with a support, or companion, tranche created from the original mortgage pool.
• If the prepayment speed of the collateral stays at one level between the lower prepayment rate (90 PSA) and the upper prepayment rate (300 PSA ) the principal will be received as scheduled because the support tranche will absorb excess principal or provide principal as needed.
• The certainty of PAC bond cash flow comes at the expense of increased risk to the support tranches.
Prepared by – Sameer Vijay Gunjal28
Support Tranche – High prepayment risk
• Prepayments are slower than planned– PAC tranches have priority claim of cash flows– Major prepayment goes to PAC tranches– Support tranche average maturity is extended to defer the prepayment
of principal to support tranche
• Prepayments are faster than planned– Support trance has to absorb the excess prepayment– Support tranche average maturity is contracted to absorb the
prepayment of principal– If these excesses continue to occur, the support tranches will
eventually be paid off, and the principal will then go to the PAC holders. When this happens, the PAC is referred to as a broken or busted PAC, and any further prepayments go directly to the PAC tranche.
Prepared by – Sameer Vijay Gunjal29
Typical CMO Structure
Prepared by – Sameer Vijay Gunjal30
PAC Structures
• PAC I tranche (or level I PAC tranche): A PAC structure having a support tranche with a PAC principal repayment schedule.
• PAC II tranche (level II PAC tranche or scheduled tranche): – The support tranche for a PAC I tranche that has a PAC
schedule of principal repayments. – PAC II tranches have higher prepayment risk (and
average life variability) than PAC I tranches but more prepayment protection (and less average life variability) than support tranches without schedules for principal repayment.
Prepared by – Sameer Vijay Gunjal31
Risk Characteristics of Sequential CMO
• The following table shows the contraction and extension risk of a simple sequential pay CMO containing four sequential pay tranches and one accrual tranche
Prepared by – Sameer Vijay Gunjal32
Stripped Mortgage backed securities
• Stripped MBS differ from traditional passthroughs in that the principal and interest are not allocated on a pro rata basis.– PO strips are a class of securities
that receive only the principal payment portion of each mortgage payment. The PO exhibits some negative convexity at low rates.
– IO strips are classes that receive only the interest component of each payment. The IO price is positively related to mortgage rates at low current rates.
– PO and IO prices are more volatile than the underlying passthroughs.
Prepared by – Sameer Vijay Gunjal33
Nonagency MBS
• Nonagency MBS (nonagency securities) are issued by private entities and are usually backed with nonconforming mortgage loans (loans that fail to meet the agency’s underwriting standards).
• Nonagency security cash flows are affected by mortgage default rates and thus require credit enhancement (i.e., additional support against default).
Prepared by – Sameer Vijay Gunjal34
Commercial Mortgage Backed Securities
• CMBS are structured as nonrecourse loans, meaning that the lender can only look to the collateral as a means to repay the loan.
• In contrast, the residential mortgage lender can go back to the borrower, personally, in an attempt to repay a delinquent mortgage loan.
• The analysis of CMBS structures focuses on two key ratios to assess the credit risk of the property: – Debt-to-service coverage ratio = NOI / Debt Service• Higher is better (lender perspective)
– Loan-to-value ratio = Current mortgage amount / current appraised value• Lower is better (lender perspective)
Prepared by – Sameer Vijay Gunjal35
CMBS Structures for investors
• Methods of call protection for the CMBS at the loan level include:– Prepayment lock outs prevent the borrower from repaying the
loan for a set period of time.– Defeasance increases the quality of a CMBS loan pool by
reinvesting any prepayments in Treasury securities.– Penalty fees may be assessed against a borrower for prepayment.– Yield maintenance charges require the borrower to make whole
the amount of interest that would be paid to the lender upon prepayment.
• At the CMBS pool level, cash prepayments are assigned to tranches, which mitigates the amount of prepayment risk of the more senior tranches.
Prepared by – Sameer Vijay Gunjal
Thank You…